Alex Deucher [Tue, 19 May 2020 20:54:55 +0000 (16:54 -0400)]
drm/amdgpu: improve error handling in pcie_bw
1. Initialize the counters to 0 in case the callback
fails to initialize them.
2. The counters don't exist on APUs so return an error
for them.
3. Return an error if the callback doesn't exist.
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-By: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 21 May 2020 13:56:58 +0000 (09:56 -0400)]
drm/amdkfd: fix restore worker race condition
In free memory of gpu path, remove bo from validate_list to make sure
restore worker don't access the BO any more, then unregister bo MMU
interval notifier. Otherwise, the restore worker will crash in the
middle of validating BO user pages if MMU interval notifer is gone.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Wed, 20 May 2020 15:25:56 +0000 (18:25 +0300)]
drm/amdgpu: off by one in amdgpu_device_attr_create_groups() error handling
This loop in the error handling code should start a "i - 1" and end at
"i == 0". Currently it starts a "i" and ends at "i == 1". The result
is that it removes one attribute that wasn't created yet, and leaks the
zeroeth attribute.
Fixes: fd82912b0ae0 ("drm/amdgpu: optimize amdgpu device attribute code") Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct smu10_voltage_dependency_table.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stylon Wang [Thu, 30 Apr 2020 08:40:09 +0000 (16:40 +0800)]
drm/amd/display: Fix incorrectly pruned modes with deep color
[Why]
When "max bpc" is set to enable deep color, some modes are removed from
the list if they fail validation on max bpc. These modes should be kept
if they validates fine with lower bpc.
[How]
- Retry with lower bpc in mode validation.
- Same in atomic commit to apply working bpc, not necessarily max bpc.
Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Avoid pipe split when plane is too small
[Why]
The minimum plane size we can support in DML is 16x16. If we try to pass
a 16x16 plane with dynamic pipe split then validation will fail since it
tries to split it into two pipes, each 8x8.
Some userspace doesn't check that the commit fails and because the
commit fails the old state is retained, resulting in corruption.
[How]
Add a workaround to avoid pipe split if any plane is 16x16 or smaller.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Defer cursor lock until after VUPDATE
[Why]
We dropped the delay after changed the cursor functions locking the
entire pipe to locking just the CURSOR registers to fix page flip
stuttering - this introduced cursor stuttering instead, and an underflow
issue.
The cursor update can be delayed indefinitely if the cursor update
repeatedly happens right around VUPDATE.
The underflow issue can happen if we do a viewport update on a pipe
on the same frame where a cursor update happens around VUPDATE - the
old cursor registers are retained which can be in an invalid position.
This can cause a pipe hang and indefinite underflow.
[How]
The complex, ideal solution to the problem would be a software
triple buffering mechanism from the DM layer to program only one cursor
update per frame just before VUPDATE.
The simple workaround until we have that infrastructure in place is
this change - bring back the delay until VUPDATE before locking, but
with some corrections to the calculations.
This didn't work for all timings before because the calculation for
VUPDATE was wrong - it was using the offset from VSTARTUP instead and
didn't correctly handle the case where VUPDATE could be in the back
porch.
Add a new hardware sequencer function to use the existing helper to
calculate the real VUPDATE start and VUPDATE end - VUPDATE can last
multiple lines after all.
Change the udelay to incorporate the width of VUPDATE as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During the rework for removing the FPU issues, I found the following
warning:
[..] dml_common_defs.o: warning: objtool: dml_round()+0x9: FPU
instruction outside of kernel_fpu_{begin,end}()
This file has a single function that does not need to be in a specific
file. This commit drop dml_common_defs file, and move dml_round function
to dml_inline_defs.
CC: Christian König <christian.koenig@amd.com> CC: Alexander Deucher <Alexander.Deucher@amd.com> CC: Peter Zijlstra <peterz@infradead.org> CC: Tony Cheng <tony.cheng@amd.com> CC: Harry Wentland <hwentlan@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Assigning a different DSC resource than the one previosly used is
currently not handled. This causes black screen on mode change when more
than one monitor is connected on some ASICs.
[how]
- Acquire the previously used DSC if available
- Make sure re-program is triggered if new DSC is used
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 21 May 2020 03:30:28 +0000 (11:30 +0800)]
drm/amdkfd: report the real PCI bus number
Since the PCI bus number retrieved by PCI_BUS_NUM(pdev->devfn)
is wrong.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Zhang [Mon, 18 May 2020 03:15:52 +0000 (11:15 +0800)]
drm/amdgpu fix incorrect sysfs remove behavior for xgmi
Under xgmi setup,some sysfs fail to create for the second time of kmd
driver loading. It's due to sysfs nodes are not removed appropriately
in the last unlod time.
Changes of this patch:
1. remove sysfs for dev_attr_xgmi_error
2. remove sysfs_link adev->dev->kobj with target name.
And it only needs to be removed once for a xgmi setup
3. remove sysfs_link hive->kobj with target name
In amdgpu_xgmi_remove_device:
1. amdgpu_xgmi_sysfs_rem_dev_info needs to be run per device
2. amdgpu_xgmi_sysfs_destroy needs to be run on the last node of
device.
v2: initialize array with memset
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 20 May 2020 10:13:50 +0000 (18:13 +0800)]
drm/amd/powerplay: unify the prompts on thermal interrupts
The prompts will contain pci address(segment/bus/port/function),
severity(warn or error) and some keywords(GPU, amdgpu). Also this
address the issue that pci bus retrieved by PCI_BUS_NUM(adev->pdev->devfn)
is wrong.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Fri, 15 May 2020 05:19:24 +0000 (07:19 +0200)]
drm/amd/display: Enable fp16 also on DCE-11.0 - DCE-12. (v2)
Testing on a Polaris11 gpu with DCE-11.2 suggests that it
seems to work fine there, so optimistically enable it for
DCE-11 and later.
v2: drop DCE 11.0 hunk. Carrizo (DCE 11.0) has a HW bug where FP16
scaling doesn't work. The upscale and downscale factors were
intended to block those FP16 cases and reject the commit but
nobody ever added those to atomic check. Once those are added
to atomic check, this can be re-enabled.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Fri, 15 May 2020 05:19:23 +0000 (07:19 +0200)]
drm/amd/display: Expose support for xBGR ordered fp16 formats.
Expose support for DRM_FORMAT_ABGR16161616F and
DRM_FORMAT_XBGR16161616F to the DRM core, complementing
the already existing xRGB ordered fp16 formats.
These are especially useful for creating presentable
swapchains in Vulkan for VK_FORMAT_R16G16B16A16_SFLOAT.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Thu, 7 May 2020 15:34:08 +0000 (11:34 -0400)]
drm/amd/display: Respect PP_STUTTER_MODE but don't override DC_DISABLE_STUTTER
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Thu, 7 May 2020 13:48:06 +0000 (09:48 -0400)]
drm/amd/display: Fix disable_stutter debug option
[Why & How]
One call was forcing stutter on instead of looking at the debug option.
Ensure we always check the debug option unless we want to force stutter
off.
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 1 May 2020 18:23:37 +0000 (14:23 -0400)]
drm/amd/display: Add DC Debug mask to disable features for bringup
[Why]
At bringup we want to be able to disable various power features.
[How]
These features are already exposed as dc_debug_options and exercised
on other OSes. Create a new dc_debug_mask module parameter and expose
relevant bits, in particular
* DC_DISABLE_PIPE_SPLIT
* DC_DISABLE_STUTTER
* DC_DISABLE_DSC
* DC_DISABLE_CLOCK_GATING
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 7 May 2020 04:39:18 +0000 (12:39 +0800)]
drm/amdgpu: cleanup unnecessary virt sriov check in amdgpu attribute
the amdgpu device attribute node will be created accordding to sriov vf
mode at runtime.
cleanup unnecessary sriov check in attribute operation function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 21 May 2020 00:24:37 +0000 (10:24 +1000)]
Merge tag 'exynos-drm-next-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Check imported buffer mapping in generic way
- This patch reworks exynos_drm_gem_prime_import_sg_table function,
which checks if the imported buffer has been mapped as contiguous
or not in generic way, and flag a exynos gem buffer type properly
according to the mapped way.
Fixups
- Drop a reference count to in_bridge_node correctly.
- Enable the runtime power management correctly.
. The runtime pm should be enabled before calling compont_add().
Cleanups
- Do not register "by hand" a sysfs file, and use dev_groups instead.
- Drop internal 'pages' array which aren't needed.
- Remove dead-code.
- Correct type casting.
- Drop unnecessary error messages.
Dave Airlie [Wed, 20 May 2020 03:36:44 +0000 (13:36 +1000)]
Merge tag 'drm-intel-next-2020-05-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- drm/i915: Show per-engine default property values in sysfs
By providing the default values configured into the kernel via sysfs, it
is much more convenient for userspace to restore those sane defaults, or
at least know what are considered good baseline. This is useful, for
example, to cleanup after any failed userspace prior to commencing new
jobs.
Cross-subsystem Changes:
- video/hdmi: Add Unpack only function for DRM infoframe
- Includes pull request gvt-next-2020-05-12
Driver Changes:
- Restore Cherryview back to full-ppgtt (Chris, Mika)
- Document locking guidelines for i915 (Chris, Daniel, Joonas)
- Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris)
- Display WA #1105: Require linear fb stride to be multiple of 512 bytes on
gen9/glk (Ville)
- Add Wa_14010685332 for ICP/ICL (Matt R)
- Restrict w/a 1607087056 for EHL/JSL (Swathi)
- Fix interrupt handling for DP AUX transactions on Tigerlake (Imre)
- Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika)
- Fix HDC pipeline flush hardware bit on Gen12 (Mika)
- Flush L3 when flushing render on Gen12 (Mika)
- Invalidate aux table entries forcibly between BB on Gen12 (Mika)
- Add aux table invalidate for all engines on Gen12 (Mika)
- Force pte cacheline to main memory Gen8+ (Mika)
- Add and enable TGL+ SAGV support (Stanislav)
- Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian)
- Replace zero-length array with flexible-array (Gustavo)
- Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris)
- Remove wait priority boosting (Chris)
- Keep driver module referenced when PMU is active (Chris)
- Sanitize RPS interrupts upon resume (Chris)
- Extend pcode read timeout to 20 ms (Chris)
- Wait for ACT sent before enabling MST pipe (Ville)
- Extend support to async relocations to SNB (Chris)
- Remove CNL pre-prod workarounds (Ville)
- Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan)
- Record the active CCID from before reset (Chris)
- Mark concurrent submissions with a weak-dependency (Chris)
- Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel)
- Prevent using semaphores to chain up to external fences (Chris)
- Fix GLK watermark calculations (Ville)
- Emit await(batch) before MI_BB_START (Chris)
- Reset execlists registers before HWSP (Chris)
- Drop no-semaphore boosting in favor of fast timeslicing (Chris)
- Fix enabled infoframe states of lspcon (Gwan-gyeong)
- Program DP SDPs on pipe updates (Gwan-gyeong)
- Stop sending DP SDPs on ddi disable (Gwan-gyeong)
- Store CS timestamp frequency in Hz (Ville)
- Remove unused HAS_FWTABLE macro (Pascal)
- Use batchbuffer chaining for relocations to save ring space (Chris)
- Try different engines for relocs if MI ops not supported (Chris, Tvrtko)
- Lazily acquire the device wakeref for freeing objects (Chris)
- Streamline display code arithmetics around rounding etc. (Ville)
- Use bw state for per crtc SAGV evaluation (Stanislav)
- Track active_pipes in bw_state (Stanislav)
- Nuke mode.vrefresh usage (Ville)
- Warn if the FBC is still writing to stolen on removal (Chris)
- Added new PCode commands prepping for QGV rescricting (Stansilav)
- Stop holding onto the pinned_default_state (Chris)
- Propagate error from completed fences (Chris)
- Ignore submit-fences on the same timeline (Chris)
- Pull waiting on an external dma-fence into its routine (Chris)
- Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris)
- Mark up the racy read of execlists->context_tag (Chris)
- Tidy up the return handling for completed dma-fences (Chris)
- Introduce skl_plane_wm_level accessor (Stanislav)
- Extract SKL SAGV checking (Stanislav)
- Make active_pipes check skl specific (Stanislav)
- Suspend tasklets before resume sanitization (Chris)
- Remove redundant exec_fence (Chris)
- Mark the addition of the initial-breadcrumb in the request (Chris)
- Transfer old virtual breadcrumbs to irq_worker (Chris)
- Read the DP SDPs from the video DIP (Gwan-gyeong)
- Program DP SDPs with computed configs (Gwan-gyeong)
- Add state readout for DP VSC and DP HDR Metadata Infoframe SDP
(Gwan-gyeong)
- Add compute routine for DP PSR VSC SDP (Gwan-gyeong)
- Use new DP VSC SDP compute routine on PSR (Gwan-gyeong)
- Restrict qgv points which don't have enough bandwidth. (Stanislav)
- Nuke pointless div by 64bit (Ville)
- Static checker code fixes (Nathan, Mika, Chris)
- Add logging function for DP VSC SDP (Gwan-gyeong)
- Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the
crtc state dump (Gwan-gyeong)
- Make timeslicing explicit engine property (Chris, Tvrtko)
- Selftest and debugging improvements (Chris)
- Align variable names with BSpec (Ville)
- Tidy up gen8+ breadcrumb emission code (Chris)
- Turn intel_digital_port_connected() in a vfunc (Ville)
- Use stashed away hpd isr bits in intel_digital_port_connected() (Ville)
- Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville)
Dave Airlie [Wed, 20 May 2020 03:28:04 +0000 (13:28 +1000)]
Merge tag 'amd-drm-next-5.8-2020-05-19' of git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.8-2020-05-19:
amdgpu:
- Improved handling for CTF (Critical Thermal Fault) situations
- Clarify AC/DC mode switches
- SR-IOV fixes
- XGMI fixes for RAS
- Misc cleanups
- Add autodump debugfs node to aid in GPU hang debugging
UAPI:
- Add a MEM_SYNC IB flag for handling proper acquire memory semantics if UMDs expect the kernel to handle this
Used by AMDVLK: https://github.com/GPUOpen-Drivers/pal/blob/dev/src/core/os/amdgpu/amdgpuQueue.cpp#L1262
Imre Deak [Thu, 14 May 2020 20:45:53 +0000 (23:45 +0300)]
drm/i915: Fix AUX power domain toggling across TypeC mode resets
Make sure to select the port's AUX power domain while holding the TC
port lock. The domain depends on the port's current TC mode, which may
get changed under us if we're not holding the lock.
This was left out from
commit 571e86960e38 ("drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers")
drm/i915: Mark check_shadow_context_ppgtt as maybe unused
When CONFIG_DRM_I915_DEBUG_GEM is not set, clang warns:
drivers/gpu/drm/i915/gvt/scheduler.c:884:1: warning: function
'check_shadow_context_ppgtt' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
check_shadow_context_ppgtt(struct execlist_ring_context *c, struct
intel_vgpu_mm *m)
^
1 warning generated.
This warning is similar to -Wunused-function but rather than warning
that the function is completely unused, it warns that it is used in some
expression within the file but that expression will be evaluated to a
constant or be optimized away in the final assembly, essentially making
it appeared used but really isn't. Usually, this happens when a function
or variable is only used in sizeof, where it will appear to be used but
will be evaluated at compile time and not be required to be emitted.
In this case, the function is only used in GEM_BUG_ON, which is defined
as BUILD_BUG_ON_INVALID, which intentionally follows this pattern. To
fix this warning, add __maybe_unused to make it clear that this is
intentional depending on the configuration.
After the function is no longer marked 'inline', there
is now a new warning pointing out that the only caller
is inside of an #ifdef:
drivers/gpu/drm/i915/display/intel_panel.c:493:12: warning: 'scale_user_to_hw' defined but not used [-Wunused-function]
493 | static u32 scale_user_to_hw(struct intel_connector *connector,
| ^~~~~~~~~~~~~~~~
Move the function itself into that #ifdef as well.
Marek Olšák [Mon, 27 Apr 2020 20:04:47 +0000 (16:04 -0400)]
drm/amdgpu: apply AMDGPU_IB_FLAG_EMIT_MEM_SYNC to compute IBs too (v3)
Compute IBs need this too.
v2: split out version bump
v3: squash in emit frame count fixes
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Mon, 27 Apr 2020 15:45:49 +0000 (23:45 +0800)]
drm/amdgpu: optimize amdgpu device attribute code
unified amdgpu device attribute node functions:
1. add some helper functions to create amdgpu device attribute node.
2. create device node according to device attr flags on different VF mode.
3. rename some functions name to adapt a new interface.
v2:
1. remove ATTR_STATE_DEAD, ATTR_STATE_ALIVE enum.
2. rename callback function perform to attr_update.
3. modify some variable names
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Wed, 29 Apr 2020 10:49:23 +0000 (18:49 +0800)]
drm/amdgpu: add amdgpu_virt_get_vf_mode helper function
the swsmu or powerplay(hwmgr) need to handle task according to different VF mode,
this function to help query vf mode.
vf mode:
1. SRIOV_VF_MODE_BARE_METAL: the driver work on host OS (PF)
2. SRIOV_VF_MODE_ONE_VF : the driver work on guest OS with one VF
3. SRIOV_VF_MODE_MULTI_VF : the driver work on guest OS with multi VF
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Add autodump debugfs node for gpu reset v8
When GPU got timeout, it would notify an interested part
of an opportunity to dump info before actual GPU reset.
A usermode app would open 'autodump' node under debugfs system
and poll() for readable/writable. When a GPU reset is due,
amdgpu would notify usermode app through wait_queue_head and give
it 10 minutes to dump info.
After usermode app has done its work, this 'autodump' node is closed.
On node closure, amdgpu gets to know the dump is done through
the completion that is triggered in release().
There is no write or read callback because necessary info can be
obtained through dmesg and umr. Messages back and forth between
usermode app and amdgpu are unnecessary.
v2: (1) changed 'registered' to 'app_listening'
(2) add a mutex in open() to prevent race condition
v3 (chk): grab the reset lock to avoid race in autodump_open,
rename debugfs file to amdgpu_autodump,
provide autodump_read as well,
style and code cleanups
v4: add 'bool app_listening' to differentiate situations, so that
the node can be reopened; also, there is no need to wait for
completion when no app is waiting for a dump.
v5: change 'bool app_listening' to 'enum amdgpu_autodump_state'
add 'app_state_mutex' for race conditions:
(1)Only 1 user can open this file node
(2)wait_dump() can only take effect after poll() executed.
(3)eliminated the race condition between release() and
wait_dump()
v6: removed 'enum amdgpu_autodump_state' and 'app_state_mutex'
removed state checking in amdgpu_debugfs_wait_dump
Improve on top of version 3 so that the node can be reopened.
v7: move reinit_completion into open() so that only one user
can open it.
v8: remove complete_all() from amdgpu_debugfs_wait_dump().
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emil Velikov [Sun, 17 May 2020 19:36:55 +0000 (20:36 +0100)]
drm/exynos-vidi: convert platform driver to use dev_groups
Platform drivers now have the option to have the platform core create
and remove any needed sysfs attribute files. So take advantage of that
and do not register "by hand" a sysfs file.
Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/exynos: dsi: Remove bridge node reference in error handling path in probe function
'exynos_dsi_parse_dt()' takes a reference to 'dsi->in_bridge_node'.
This must be released in the error handling path.
In order to do that, add an error handling path and move the
'exynos_dsi_parse_dt()' call from the beginning to the end of the probe
function to ease the error handling path.
This function only sets some variables which are used only in the
'transfer' function.
The call chain is:
.transfer
--> exynos_dsi_host_transfer
--> exynos_dsi_init
--> exynos_dsi_enable_clock (use burst_clk_rate and esc_clk_rate)
--> exynos_dsi_set_pll (use pll_clk_rate)
While at it, also handle cases where 'component_add()' fails.
This patch is similar to commit 43491a3bd6e4 ("drm/exynos: dsi: Remove bridge node reference in removal")
which fixed the issue in the remove function.
Marek Szyprowski [Thu, 14 May 2020 10:08:12 +0000 (12:08 +0200)]
drm/exynos: mixer: Fix enabling of the runtime power management
Runtime power management is essential for the Exynos Mixer driver
operation. It should be enabled before adding its DRM component, because
in some cases (when deferred probe takes place due to the IOMMU
availability) the DRM driver might be initialized directly from the
Mixer's component_add() call, what results in starting the driver
operation without enabling the runtime power management.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Marek Szyprowski [Thu, 23 Apr 2020 05:43:49 +0000 (14:43 +0900)]
drm/exynos: gem: Get rid of the internal 'pages' array
Internal pages array and scatter-list for them is not really needed for
anything. FBDev emulation can simply rely on the DMA-mapping framework
to create a proper kernel mapping for the buffer, while all other buffer
use cases don't really need that array at all.
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Marek Szyprowski [Wed, 22 Apr 2020 11:40:59 +0000 (13:40 +0200)]
drm/exynos: gem: rework scatter-list contiguity check on prime import
Explicitly check if the imported buffer has been mapped as contiguous in
the DMA address space, what is required by all Exynos DRM CRTC drivers.
While touching this, set buffer flags depending on the availability of
the IOMMU.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
The ExynosDRM page fault handler is never used, drm_gem_mmap()
always calls exynos_drm_gem_mmap() function, which perform
complete mapping for the given virtual address-space area.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Dave Airlie [Fri, 15 May 2020 01:58:55 +0000 (11:58 +1000)]
Merge tag 'drm-misc-next-2020-05-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.8:
UAPI Changes:
Cross-subsystem Changes:
* dma-buf: use atomic64_fetch_add() for context id
* Documentation: document bindings for ASUS ZOOT TM5P5, BOE NV133FHM-N62,
hpd-gpios
Core Changes:
Driver Changes:
* drm/ast: fix supend; cleanups
* drm/i2c: cleanups
* drm/panel: add MODULE_LICENSE to panel-visinox-rm69299; add support for
ASUS TM5P5i, BOE NV133FHM-N62i; fix size and bpp of BOE NV133FHM-N61
add hpd-gpio to panel-simple
* drm/mcde: fix return value check in mcde_dsi_bind()
* drm/mgag200: use managed drmm_mode_config_init(); cleanups
* fbdev/pxa168fb: cleanups
Colin Ian King [Tue, 12 May 2020 12:48:06 +0000 (13:48 +0100)]
drm/amdgpu: remove redundant assignment to variable ret
The variable ret is being initializeed with a value that is never read
and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yintian Tao [Tue, 12 May 2020 10:10:42 +0000 (18:10 +0800)]
drm/amdgpu: turn back rlcg write for gfx_v10
There is no need to use amdgpu_mm_wreg_mmio_rlc()
during initialization time because this interface
is only designed for debugfs case to access the
registers which are only permitted by RLCG during
run-time. Therefore, turn back rlcg write for gfx_v10.
If we not turn back it, it will raise amdgpu load failure.
[ 54.904333] amdgpu: SMU driver if version not matched
[ 54.904393] amdgpu: SMU is initialized successfully!
[ 54.905971] [drm] kiq ring mec 2 pipe 1 q 0
[ 55.115416] amdgpu 0000:00:06.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring gfx_0.0.0 test failed (-110)
[ 55.118877] [drm:amdgpu_device_init [amdgpu]] *ERROR* hw_init of IP block <gfx_v10_0> failed -110
[ 55.126587] amdgpu 0000:00:06.0: amdgpu_device_ip_init failed
[ 55.133466] amdgpu 0000:00:06.0: Fatal error during GPU init
Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 8 May 2020 09:55:42 +0000 (17:55 +0800)]
drm/amd/powerplay: report correct AC/DC event based on ctxid V2
'ctxid' is used to distinguish different events raised from SMC.
0x3 and 0x4 are for AC and DC power mode.
V2: update the way to retrieve the ctxid and change the log level
to debug
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Sat, 9 May 2020 05:49:26 +0000 (13:49 +0800)]
drm/amd/powerplay: shutdown on HW CTF
To prevent further damage.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Sat, 9 May 2020 05:26:00 +0000 (13:26 +0800)]
drm/amd/powerplay: try to do a graceful shutdown on SW CTF
Normally this(SW CTF) should not happen. And by doing graceful
shutdown we can prevent further damage.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joonas Lahtinen [Fri, 30 Aug 2019 10:50:53 +0000 (13:50 +0300)]
drm/i915: Document locking guidelines
To ensure cross-driver locking compatibility, document the expected
guidelines for implementing the GEM locking in i915. Note that this
is a description of how things should end up after being reworked,
and does not reflect the current state of things.
v2: Use rst note:: tag (Rodrigo)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190830105053.17491-1-joonas.lahtinen@linux.intel.com
Pull the code to do the CS timestamp ns<->ticks conversion into
helpers and use them all over.
The check in i915_perf_noa_delay_set() seems a bit dubious,
so we switch it to do what I assume it wanted to do all along
(ie. make sure the resulting delay in CS timestamp ticks
doesn't exceed 32bits)?
v3: Forbid simultaneous legacy SAGV PCode requests and
restricting qgv points. Put the actual restriction
to commit function, added serialization(thanks to Ville)
to prevent commit being applied out of order in case of
nonblocking and/or nomodeset commits.
v4:
- Minor code refactoring, fixed few typos(thanks to James Ausmus)
- Change the naming of qgv point
masking/unmasking functions(James Ausmus).
- Simplify the masking/unmasking operation itself,
as we don't need to mask only single point per request(James Ausmus)
- Reject and stick to highest bandwidth point if SAGV
can't be enabled(BSpec)
v5:
- Add new mailbox reply codes, which seems to happen during boot
time for TGL and indicate that QGV setting is not yet available.
v6:
- Increase number of supported QGV points to be in sync with BSpec.
v7: - Rebased and resolved conflict to fix build failure.
- Fix NUM_QGV_POINTS to 8 and moved that to header file(James Ausmus)
v8: - Don't report an error if we can't restrict qgv points, as SAGV
can be disabled by BIOS, which is completely legal. So don't
make CI panic. Instead if we detect that there is only 1 QGV
point accessible just analyze if we can fit the required bandwidth
requirements, but no need in restricting.
v9: - Fix wrong QGV transition if we have 0 planes and no SAGV
simultaneously.
v10: - Fix CDCLK corruption, because of global state getting serialized
without modeset, which caused copying of non-calculated cdclk
to be copied to dev_priv(thanks to Ville for the hint).
v11: - Remove unneeded headers and spaces(Matthew Roper)
- Remove unneeded intel_qgv_info qi struct from bw check and zero
out the needed one(Matthew Roper)
- Changed QGV error message to have more clear meaning(Matthew Roper)
- Use state->modeset_set instead of any_ms(Matthew Roper)
- Moved NUM_SAGV_POINTS from i915_reg.h to i915_drv.h where it's used
- Keep using crtc_state->hw.active instead of .enable(Matthew Roper)
- Moved unrelated changes to other patch(using latency as parameter
for plane wm calculation, moved to SAGV refactoring patch)
v12: - Fix rebase conflict with own temporary SAGV/QGV fix.
- Remove unnecessary mask being zero check when unmasking
qgv points as this is completely legal(Matt Roper)
- Check if we are setting the same mask as already being set
in hardware to prevent error from PCode.
- Fix error message when restricting/unrestricting qgv points
to "mask/unmask" which sounds more accurate(Matt Roper)
- Move sagv status setting to icl_get_bw_info from atomic check
as this should be calculated only once.(Matt Roper)
- Edited comments for the case when we can't enable SAGV and
use only 1 QGV point with highest bandwidth to be more
understandable.(Matt Roper)
v13: - Moved max_data_rate in bw check to closer scope(Ville Syrjälä)
- Changed comment for zero new_mask in qgv points masking function
to better reflect reality(Ville Syrjälä)
- Simplified bit mask operation in qgv points masking function
(Ville Syrjälä)
- Moved intel_qgv_points_mask closer to gen11 SAGV disabling,
however this still can't be under modeset condition(Ville Syrjälä)
- Packed qgv_points_mask as u8 and moved closer to pipe_sagv_mask
(Ville Syrjälä)
- Extracted PCode changes to separate patch.(Ville Syrjälä)
- Now treat num_planes 0 same as 1 to avoid confusion and
returning max_bw as 0, which would prevent choosing QGV
point having max bandwidth in case if SAGV is not allowed,
as per BSpec(Ville Syrjälä)
- Do the actual qgv_points_mask swap in the same place as
all other global state parts like cdclk are swapped.
In the next patch, this all will be moved to bw state as
global state, once new global state patch series from Ville
lands
v14: - Now using global state to serialize access to qgv points
- Added global state locking back, otherwise we seem to read
bw state in a wrong way.
v15: - Added TODO comment for near atomic global state locking in
bw code.
v16: - Fixed intel_atomic_bw_* functions to be intel_bw_* as discussed
with Jani Nikula.
- Take bw_state_changed flag into use.
v17: - Moved qgv point related manipulations next to SAGV code, as
those are semantically related(Ville Syrjälä)
- Renamed those into intel_sagv_(pre)|(post)_plane_update
(Ville Syrjälä)
v18: - Move sagv related calls from commit tail into
intel_sagv_(pre)|(post)_plane_update(Ville Syrjälä)
v19: - Use intel_atomic_get_bw_(old)|(new)_state which is intended
for commit tail stage.
v20: - Return max bandwidth for 0 planes(Ville)
- Constify old_bw_state in bw_atomic_check(Ville)
- Removed some debugs(Ville)
- Added data rate to debug print when no QGV points(Ville)
- Removed some comments(Ville)
v21, v22, v23: - Fixed rebase conflict
v24: - Changed PCode mask to use ICL_ prefix
v25: - Resolved rebase conflict
v27: - Use device specific drm_err(Ville)
- Fixed parenthesis ident reported by checkpatch
Line over 100 warns to be fixed together with
existing code style.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Ville Syrjälä <ville.syrjala@intel.com> Cc: James Ausmus <james.ausmus@intel.com>
[vsyrjala: Drop duplicate intel_sagv_{pre,post}_plane_update() prototypes
and drop unused NUM_SAGV_POINTS define] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200514074853.9508-3-stanislav.lisovskiy@intel.com
Starting from TGL we need to have a separate wm0
values for SAGV and non-SAGV which affects
how calculations are done.
v2: Remove long lines
v3: Removed COLOR_PLANE enum references
v4, v5, v6: Fixed rebase conflict
v7: - Removed skl_plane_wm_level accessor from skl_allocate_pipe_ddb(Ville)
- Removed sagv_uv_wm0(Ville)
- can_sagv->use_sagv_wm(Ville)
v8: - Moved tgl_crtc_can_enable_sagv function up(Ville)
- Changed comment regarding pipe_wm usage(Ville)
- Call intel_can_enable_sagv and tgl_compute_sagv_wm only
for Gen12(Ville)
- Some sagv debugs removed(Ville)
- skl_print_wm_changes improvements(Ville)
- Do assignment instead of memcpy in
skl_pipe_wm_get_hw_state(Ville)
v9: - Removed can_sagv variable(Ville)
- Removed spurious line(Ville)
- Changed u32 to unsigned int as agreed(Ville)
- Assign sagv only for gen12 in
skl_pipe_wm_get_hw_state(Ville)
Joonas Lahtinen [Thu, 14 May 2020 15:02:22 +0000 (18:02 +0300)]
Merge tag 'gvt-next-2020-05-12' of https://github.com/intel/gvt-linux into drm-intel-next-queued
gvt-next-2020-05-12
- Support PPGTT update via LRI cmd (Zhenyu)
- Remove extra kmap for shadow ctx update (Zhenyu)
- Move workload cleanup out of execlist handling code (Zhenyu)
Gwan-gyeong Mun [Thu, 14 May 2020 06:07:32 +0000 (09:07 +0300)]
drm/i915/psr: Use new DP VSC SDP compute routine on PSR
In order to use a common VSC SDP Colorimetry calculating code on PSR,
it uses a new psr vsc sdp compute routine.
Because PSR routine has its own scenario and timings of writing a VSC SDP,
the current PSR routine needs to have its own drm_dp_vsc_sdp structure
member variable on struct i915_psr.
In order to calculate colorimetry information, intel_psr_update()
function and intel_psr_enable() function extend a drm_connector_state
argument.
There are no changes to PSR mechanism.
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Rebased
v8: Rebased
v10: When a PSR is enabled, it needs to add DP_SDP_VSC to
infoframes.enable.
It is needed for comparing between HW and pipe_state of VSC_SDP.
v11: If PSR is disabled by flag, it don't enable psr on pipe compute.
v12: Fix an inconsistent indenting
Gwan-gyeong Mun [Thu, 14 May 2020 06:07:31 +0000 (09:07 +0300)]
drm/i915/dp: Add compute routine for DP PSR VSC SDP
In order to use a common VSC SDP Colorimetry calculating code on PSR,
it adds a compute routine for PSR VSC SDP.
As PSR routine can not use infoframes.vsc of crtc state, it also adds new
writing of DP SDPs (Secondary Data Packet) for PSR.
PSR routine has its own scenario and timings of writing a VSC SDP.
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v10: 1) Fix packing of VSC SDP where Pixel Encoding/Colorimetry Format is
not supported.
2) Change a checking of PSR state.
Gwan-gyeong Mun [Thu, 14 May 2020 06:07:29 +0000 (09:07 +0300)]
drm/i915: Program DP SDPs on pipe updates
Call intel_dp_set_infoframes() function on pipe updates to make sure
that we send VSC SDP and HDR Metadata Infoframe SDP (when applicable)
on fastsets.
Gwan-gyeong Mun [Thu, 14 May 2020 06:07:28 +0000 (09:07 +0300)]
drm/i915: Fix enabled infoframe states of lspcon
Compared to implementation of DP and HDMI's encoder->infoframes_enabled,
the lspcon's implementation returns its active state. (we expect enabled
infoframe states of HW.) It leads to pipe state mismatch error
when ddi_get_config is called.
Because the current implementation of lspcon is not ready to support
readout infoframes, we need to return 0 here.
In order to support readout to lspcon, we need to implement read_infoframe
and infoframes_enabled. And set_infoframes also have to set an appropriate
bit on crtc_state->infoframes.enable
Gwan-gyeong Mun [Thu, 14 May 2020 06:07:27 +0000 (09:07 +0300)]
drm/i915: Add state readout for DP VSC SDP
Added state readout for DP VSC SDP and enabled state validation
for DP VSC SDP.
v2: Minor style fix
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v10: Skip checking of VSC SDP when a crtc config has psr.
Gwan-gyeong Mun [Thu, 14 May 2020 06:07:25 +0000 (09:07 +0300)]
drm/i915: Program DP SDPs with computed configs
In order to use computed config for DP SDPs (DP VSC SDP and DP HDR Metadata
Infoframe SDP), it replaces intel_dp_vsc_enable() function and
intel_dp_hdr_metadata_enable() function to intel_dp_set_infoframes()
function.
And it removes unused functions.
Before:
intel_dp_vsc_enable() and intel_dp_hdr_metadata_enable() compute sdp
configs and program sdp registers on enable callback of encoder.
After:
It separates computing of sdp configs and programming of sdp register.
The compute config callback of encoder calls computing sdp configs.
The enable callback of encoder calls programming sdp register.
Gwan-gyeong Mun [Thu, 14 May 2020 06:07:20 +0000 (09:07 +0300)]
drm/i915/dp: Read out DP SDPs
It adds code to read the DP SDPs from the video DIP and unpack them into
the crtc state.
It adds routines that read out DP VSC SDP and DP HDR Metadata Infoframe SDP
In order to unpack DP VSC SDP, it adds intel_dp_vsc_sdp_unpack() function.
It follows DP 1.4a spec. [Table 2-116: VSC SDP Header Bytes] and
[Table 2-117: VSC SDP Payload for DB16 through DB18]
In order to unpack DP HDR Metadata Infoframe SDP, it adds
intel_dp_hdr_metadata_infoframe_sdp_unpack(). And it follows DP 1.4a spec.
([Table 2-125: INFOFRAME SDP v1.2 Header Bytes] and
[Table 2-126: INFOFRAME SDP v1.2 Payload Data Bytes - DB0 through DB31])
and CTA-861-G spec. [Table-42 Dynamic Range and Mastering InfoFrame].
A naming rule and style of intel_read_dp_sdp() function references
intel_read_infoframe() function of intel_hdmi.c
v2: Minor style fix
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v5: Addressed review comments from Uma
- Polish commit message and comments
- Combine the if checks of sdp.HB2 and sdp.HB3
- Add 6bpc to unpacking of VSC SDP
Gwan-gyeong Mun [Thu, 14 May 2020 06:07:19 +0000 (09:07 +0300)]
video/hdmi: Add Unpack only function for DRM infoframe
It adds an unpack only function for DRM infoframe for dynamic range and
mastering infoframe readout.
It unpacks the information data block contained in the binary buffer into
a structured frame of the HDMI Dynamic Range and Mastering (DRM)
information frame.
In contrast to hdmi_drm_infoframe_unpack() function, it does not verify
a checksum.
It can be used for unpacking a DP HDR Metadata Infoframe SDP case.
DP HDR Metadata Infoframe SDP uses the same Dynamic Range and Mastering
(DRM) information (CTA-861-G spec.) such as HDMI DRM infoframe.
But DP SDP header and payload structure are different from HDMI DRM
Infoframe. Therefore unpacking DRM infoframe for DP requires skipping of
a verifying checksum.
v9: Add clear comments to hdmi_drm_infoframe_unpack_only() and
hdmi_drm_infoframe_unpack() (Laurent Pinchart)
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-2-gwan-gyeong.mun@intel.com
Chris Wilson [Wed, 13 May 2020 07:47:46 +0000 (08:47 +0100)]
drm/i915/gt: Transfer old virtual breadcrumbs to irq_worker
The second try at staging the transfer of the breadcrumb. In part one,
we realised we could not simply move to the second engine as we were
only holding the breadcrumb lock on the first. So in commit b20f0c77105d
("drm/i915/gt: Stage the transfer of the virtual breadcrumb"), we
removed it from the first engine and marked up this request to reattach
the signaling on the new engine. However, this failed to take into
account that we only attach the breadcrumb if the new request is added
at the start of the queue, which if we are transferring, it is because
we know there to be a request to be signaled (and hence we would not be
attached).
In this attempt, we try to transfer the completed requests to the
irq_worker on its rq->engine->breadcrumbs. This preserves the coupling
between the rq and its breadcrumbs, so that
i915_request_cancel_breadcrumb() does not attempt to manipulate the list
under the wrong lock.
v2: Code sharing is fun.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1862 Fixes: b20f0c77105d ("drm/i915/gt: Stage the transfer of the virtual breadcrumb") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 14 May 2020 06:29:05 +0000 (07:29 +0100)]
drm/i915: Show per-engine default property values in sysfs
By providing the default values configured into the kernel via sysfs, it
is much more convenient for userspace to restore those sane defaults, or
at least know what are considered good baseline. This is useful, for
example, to cleanup after any failed userspace prior to commencing new
jobs.
Chris Wilson [Wed, 13 May 2020 17:35:04 +0000 (18:35 +0100)]
drm/i915: Drop no-semaphore boosting
Now that we have fast timeslicing on semaphores, we no longer need to
prioritise none-semaphore work as we will yield any work blocked on a
semaphore to the next in the queue. Previously with no timeslicing,
blocking on the semaphore caused extremely bad scheduling with multiple
clients utilising multiple rings. Now, there is no impact and we can
remove the complication.
Dave Airlie [Thu, 14 May 2020 01:33:09 +0000 (11:33 +1000)]
Merge tag 'drm-intel-next-2020-04-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Fix GitLab #1698: Performance regression with Linux 5.7-rc1 on
Iris Plus 655 and 4K screen (Chris)
- Add Wa_14011059788 for Tigerlake (Matt A)
- Add per ctx batchbuffer wa for timestamp for Gen12 (Mika)
- Use indirect ctx bb to load cmd buffer control value
from context image to avoid corruption (Mika)
- Enable DP Display Audio WA (Uma, Jani)
- Update forcewake firmware ranges for Icelake (Radhakrishna)
- Add missing deinitialization cases of load failure for display (Jose)
- Implement TC cold sequences for Icelake and Tigerlake (Jose)
- Unbreak enable_dpcd_backlight modparam (Lyude)
- Move the late flush_submission in retire to the end (Chris)
- Demote "Reducing compressed framebufer size" message to info (Peter)
- Push MST link retraining to the hotplug work (Ville)
- Hold obj->vma.lock over for_each_ggtt_vma() (Chris)
- Fix timeout handling during TypeC AUX power well enabling for ICL (Imre)
- Fix skl+ non-scaled pfit modes (Ville)
- Prefer soft-rc6 over RPS DOWN_TIMEOUT (Chris)
- Sanitize GT first before poisoning HWSP (Chris)
- Fix up clock RPS frequency readout (Chris)
- Avoid reusing the same logical CCID (Chris)
- Avoid dereferencing a dead context (Chris)
- Always enable busy-stats for execlists (Chris)
- Apply the aggressive downclocking to parking (Chris)
- Restore aggressive post-boost downclocking (Chris)
- Scrub execlists state on resume (Chris)
- Add debugfs attributes for LPSP (Ansuman)
- Improvements to kernel selftests (Chris, Mika)
- Add tiled blits selftest (Zbigniew)
- Fix error handling in __live_lrc_indirect_ctx_bb() (Dan)
- Add pre/post plane updates for SAGV (Stanislav)
- Add ICL PG3 PW ID for EHL (Anshuman)
- Fix Sphinx build duplicate label warning (Jani)
- Error log non-zero audio power refcount after unbind (Jani)
- Remove object_is_locked assertion from unpin_from_display_plane (Chris)
- Use single set of AUX powerwell ops for gen11+ (Matt R)
- Prefer drm_WARN_ON over WARN_ON (Pankaj)
- Poison residual state [HWSP] across resume (Chris, Tvrtko)
- Convert request-before-CS assertion to debug (Chris)
- Carefully order virtual_submission_tasklet (Chris)
- Check carefully for an idle engine in wait-for-idle (Chris)
- Only close vma we open (Chris)
- Trace RPS events (Chris)
- Use the RPM config register to determine clk frequencies (Chris)
- Drop rq->ring->vma peeking from error capture (Chris)
- Check preempt-timeout target before submit_ports (Chris)
- Check HWSP cacheline is valid before acquiring (Chris)
- Use proper fault mask in interrupt postinstall too (Matt R)
- Keep a no-frills swappable copy of the default context state (Chris)
- Add atomic helpers for bandwidth (Stanislav)
- Refactor setting dma info to a common helper from device info (Michael)
- Refactor DDI transcoder code for clairty (Ville)
- Extend PG3 power well ID to ICL (Anshuman)
- Refactor PFIT code for readability and future extensibility (Ville)
- Clarify code split between intel_ddi.c and intel_dp.c (Ville)
- Move out code to return the digital_port of the aux ch (Jose)
- Move rps.enabled/active and use of RPS interrupts to flags (Chris)
- Remove superfluous inlines and dead code (Jani)
- Re-disable -Wframe-address from top-level Makefile (Nick)
- Static checker and spelling fixes (Colin, Nathan)
- Split long lines (Ville)
drm: rcar-du: Set primary plane zpos immutably at initializing
According to drm_plane_create_zpos_property() function documentation,
all planes zpos range should be set if zpos property is supported.
However, the rcar-du driver didn't set primary plane zpos range. Since
the primary plane's zpos is fixed, set it immutably.
Reported-by: Yoshihito Ogawa <yoshihito.ogawa.kc@renesas.com> Reported-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Tomohito Esaki <etom@igel.co.jp> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Stone <daniels@collabora.com>
[Turn continue into if ... else ...] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
drm: plane: Verify that no or all planes have a zpos property
The zpos property is used by userspace to sort the order of planes.
While the property is not mandatory for drivers to implement, mixing
planes with and without zpos confuses userspace, and shall not be
allowed. Clarify this in the documentation and warn at runtime if the
drivers mixes planes with and without zpos properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm: panels: Add MAINTAINERS entry for LVDS panel driver
As the DRM LVDS panel driver uses a different approach to DT bindings
compared to what Thierry Reding advocates, add a specific MAINTAINERS
entry to avoid bothering Thierry with requests related to that driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
dt-bindings: display: bridge: Convert simple-bridge bindings to YAML
The simple-bridge driver supports multiple simple or dumb bridges,
covered by different compatible strings but otherwise identical DT
bindings. Some of those bridges have undocumented bindings, while others
are documented in text form in separate files. Group them all in a
single binding and convert it to YAML.
The psave-gpios property of the adi,adv7123 is dropped, as it isn't
supported by the driver and isn't specified in any DT file upstream.
Support for power saving is available through the enable-gpios property
that should cover all the needs of the ADV7123 (as the device only has a
/PSAVE pin and no enable pin).
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org>
dt-bindings: display: bridge: Reject additional properties in ports node
Document the #address-cells and #size-cells properties of the ports node
in the schemas of the bridge DT bindings, and set additionalProperties
to false to reject additional properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
Chris Wilson [Wed, 13 May 2020 07:47:59 +0000 (08:47 +0100)]
drm/i915: Drop I915_RESET_TIMEOUT and friends
These were used to set various timeouts for the reset procedure
(deciding when the engine was dead, and even if the reset itself was not
making forward progress). No longer used.
Chris Wilson [Wed, 13 May 2020 16:59:32 +0000 (17:59 +0100)]
drm/i915: Mark the addition of the initial-breadcrumb in the request
The initial-breadcrumb is used to mark the end of the awaiting and the
beginning of the user payload. We verify that we do not start the user
payload before all signaler are completed, checking our semaphore setup
by looking for the initial breadcrumb being written too early. We also
want to ensure that we do not add semaphore waits after we have already
closed the semaphore section, an issue for later deferred waits.
projects / kernel.git / log