James Smart [Thu, 17 Mar 2022 03:27:36 +0000 (20:27 -0700)]
scsi: lpfc: Fix queue failures when recovering from PCI parity error
When recovering from a pci-parity error the driver is failing to re-create
queues, causing recovery to fail. Looking deeper, it was found that the
interrupt vector count allocated on the recovery was fewer than the vectors
originally allocated. This disparity resulted in CPU map entries with stale
information. When the driver tries to re-create the queues, it attempts to
use the stale information which indicates an eq/interrupt vector that was
no longer created.
Fix by clearng the cpup map array before enabling and requesting the IRQs
in the lpfc_sli_reset_slot_s4 routine().
Link: https://lore.kernel.org/r/20220317032737.45308-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Thu, 17 Mar 2022 03:27:35 +0000 (20:27 -0700)]
scsi: lpfc: Fix unload hang after back to back PCI EEH faults
When injecting EEH errors the port is getting hung up waiting on the node
list to empty, message number 0233. The driver is stuck at this point and
also can't unload. The driver makes transport remoteport delete calls which
try to abort I/O's, but the EEH daemon has already called the driver to
detach and the detachment has set the global FC_UNLOADING flag. There are
several code paths that will avoid I/O cleanup if the FC_UNLOADING flag is
set, resulting in transports waiting for I/O while the driver is waiting on
transports to clean up.
Additionally, during study of the list, a locking issue was found in
lpfc_sli_abort_iocb_ring that could corrupt the list.
A special case was added to the lpfc_cleanup() routine to call
lpfc_sli_flush_rings() if the driver is FC_UNLOADING and if the pci-slot
is offline (e.g. EEH).
The SLI4 part of lpfc_sli_abort_iocb_ring() is changed to use the
ring_lock. Also added code to cancel the I/Os if the pci-slot is offline
and added checks and returns for the FC_UNLOADING and HBA_IOQ_FLUSH flags
to prevent trying to send an I/O that we cannot handle.
Link: https://lore.kernel.org/r/20220317032737.45308-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Thu, 17 Mar 2022 03:27:34 +0000 (20:27 -0700)]
scsi: lpfc: Improve PCI EEH Error and Recovery Handling
Following EEH errors, the driver can crash or hang when deleting the
localport or when attempting to unload.
The EEH handlers in the driver did not notify the NVMe-FC transport before
tearing the driver down. This was delayed until the resume steps. This
worked for SCSI because lpfc_block_scsi() would notify the
scsi_fc_transport that the target was not available but it would not clean
up all the references to the ndlp.
The SLI3 prep for dev reset handler did the lpfc_offline_prep() and
lpfc_offline() calls to get the port stopped before restarting. The SLI4
version of the prep for dev reset just destroyed the queues and did not
stop NVMe from continuing. Also because the port was not really stopped
the localport destroy would hang because the transport was still waiting
for I/O. Additionally, a devloss tmo can fire and post events to a stopped
worker thread creating another hang condition.
lpfc_sli4_prep_dev_for_reset() is modified to call lpfc_offline_prep() and
lpfc_offline() rather than just lpfc_scsi_dev_block() to ensure both SCSI
and NVMe transports are notified to block I/O to the driver.
Logic is added to devloss handler and worker thread to clean up ndlp
references and quiesce appropriately.
Link: https://lore.kernel.org/r/20220317032737.45308-2-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaoguang Wang [Fri, 11 Mar 2022 13:22:05 +0000 (21:22 +0800)]
scsi: target: tcmu: Fix possible page UAF
tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not
take refcount properly and just returns page pointer. When
tcmu_try_get_data_page() returns, the returned page may have been freed by
tcmu_blocks_release().
We need to get_page() under cmdr_lock to avoid concurrent
tcmu_blocks_release().
Wenchao Hao [Thu, 17 Mar 2022 15:01:16 +0000 (11:01 -0400)]
scsi: libiscsi: Remove unnecessary memset() in iscsi_conn_setup()
iscsi_cls_conn is alloced by kzalloc(), the whole iscsi_cls_conn is zero
filled already including the dd_data. So it is unnecessary to call memset
again.
Link: https://lore.kernel.org/r/20220317150116.194140-1-haowenchao@huawei.com Reviewed-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Tue, 22 Mar 2022 05:57:02 +0000 (14:57 +0900)]
scsi: mpt3sas: Fix use after free in _scsih_expander_node_remove()
The function mpt3sas_transport_port_remove() called in
_scsih_expander_node_remove() frees the port field of the sas_expander
structure, leading to the following use-after-free splat from KASAN when
the ioc_info() call following that function is executed (e.g. when doing
rmmod of the driver module):
Fix this by introducing the local variable port_id to store the port ID
value before executing mpt3sas_transport_port_remove(). This local variable
is then used in the call to ioc_info() instead of dereferencing the freed
port structure.
Link: https://lore.kernel.org/r/20220322055702.95276-1-damien.lemoal@opensource.wdc.com Fixes: 2f267d853743 ("scsi: mpt3sas: Get device objects using sas_address & portID") Cc: stable@vger.kernel.org Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lukas Bulwahn [Tue, 15 Mar 2022 06:15:20 +0000 (07:15 +0100)]
scsi: scsi_ioctl: Drop needless assignment in sg_io()
Commit e7def244f1b8 ("scsi: core: Remove the cmd field from struct
scsi_request") refactored sg_io(), so that it does not allocate directly
and hence does not return -ENOMEM in its error case. That makes a remaining
assignment of -ENOMEM to the return variable needless.
Drop this needless assignment in sg_io().
No functional change. No change in resulting object code.
Lukas Bulwahn [Tue, 15 Mar 2022 05:53:25 +0000 (06:53 +0100)]
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
Commit e7def244f1b8 ("scsi: core: Remove the cmd field from struct
scsi_request") refactored scsi_bsg_sg_io_fn() so that it does not allocate
directly and hence does not return -ENOMEM in its error case. That makes a
remaining assignment of -ENOMEM to the return variable needless.
Drop this needless assignment in scsi_bsg_sg_io_fn().
No functional change. No change in resulting object code.
James Smart [Fri, 25 Feb 2022 02:23:08 +0000 (18:23 -0800)]
scsi: lpfc: Copyright updates for 14.2.0.0 patches
Update copyrights to 2022 for files modified in the 14.2.0.0 patch set.
Link: https://lore.kernel.org/r/20220225022308.16486-18-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:23:07 +0000 (18:23 -0800)]
scsi: lpfc: Update lpfc version to 14.2.0.0
Update lpfc version to 14.2.0.0
Link: https://lore.kernel.org/r/20220225022308.16486-17-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:23:06 +0000 (18:23 -0800)]
scsi: lpfc: SLI path split: Refactor BSG paths
This patch refactors the BSG paths to use SLI-4 as the primary interface.
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-16-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Consolidate lpfc_sli4_issue_abort_iotag and lpfc_sli_issue_abort_iotag
into a single generic lpfc_sli_issue_abort_iotag routine
- Consolidate lpfc_sli4_abort_fcp_cmpl and lpfc_sli_abort_fcp_cmpl into a
single generic lpfc_sli_abort_fcp_cmpl routine
- Remove unused routine lpfc_get_iocb_from_iocbq
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-15-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:23:04 +0000 (18:23 -0800)]
scsi: lpfc: SLI path split: Refactor SCSI paths
This patch refactors the SCSI paths to use SLI-4 as the primary interface.
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-14-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Rename lpfcdiag_loop_post_rxbufs to lpfcdiag_sli3_loop_post_rxbufs to
indicate that it is an SLI3 only path
- Create new prep_wqe routine for unsolicited ELS rsp WQEs.
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-13-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:23:02 +0000 (18:23 -0800)]
scsi: lpfc: SLI path split: Refactor misc ELS paths
This patch refactors the remaining ELS paths to use SLI-4 as the primary
interface. Paths include RRQ, RSCN, unsolicited ELS RQST and RSP paths, ELS
timeouts, etc.:
- Remove unused routines lpfc_sli4_bpl2sgl and lpfc_sli4_iocb2wqe
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-12-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:23:01 +0000 (18:23 -0800)]
scsi: lpfc: SLI path split: Refactor VMID paths
This patch refactors the VMID paths to use SLI-4 as the primary interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-11-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:23:00 +0000 (18:23 -0800)]
scsi: lpfc: SLI path split: Refactor FDISC paths
This patch refactors the FDISC paths to use SLI-4 as the primary interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:22:59 +0000 (18:22 -0800)]
scsi: lpfc: SLI path split: Refactor LS_RJT paths
This patch refactors the LS_RJT paths to use SLI-4 as the primary
interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:22:58 +0000 (18:22 -0800)]
scsi: lpfc: SLI path split: Refactor LS_ACC paths
This patch refactors the LS_ACC paths to use SLI-4 as the primary
interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:22:57 +0000 (18:22 -0800)]
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
This patch refactors the SLI3/SLI4 RSCN/SCR/RDF/EDC/FARPR paths to use
SLI-4 as the primary interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch refactors the PLOGI/PRLI/ADISC/LOGO paths to use SLI-4 as
the primary interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:22:55 +0000 (18:22 -0800)]
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
The patch refactors the general ELS handling paths to migrate to SLI-4
structures or common element abstractions. The fabric login paths are
revised as part of this patch:
- New generic lpfc_sli_prep_els_req_rsp jump table routine
- Introduce ls_rjt_error_be and ulp_bde64_le unions to correct legacy
endianness assignments
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
- Clean up poor indentation on some of the ELS paths
Link: https://lore.kernel.org/r/20220225022308.16486-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The lpfc_prep_wqe() routine is used with lpfc_sli_issue_iocb() and
lpfc_sli_issue_iocb_wait(). The routine performs additional SLI-4 wqe field
setting that the generic routines did not perform as they kept their
actions compatible with both SLI3 and SLI4.
Link: https://lore.kernel.org/r/20220225022308.16486-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:22:53 +0000 (18:22 -0800)]
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
Convert the SLI4 fast and slow paths to use native SLI4 wqe constructs
instead of iocb SLI3-isms.
Includes the following:
- Create simple get_xxx and set_xxx routines to wrapper access to common
elements in both SLI3 and SLI4 commands - allowing calling routines to
avoid sli-rev-specific structures to access the elements.
- using the wqe in the job structure as the primary element
- use defines from SLI-4, not SLI-3
- Removal of iocb to wqe conversion from fast and slow path
- Add below routines to handle fast path
lpfc_prep_embed_io - prepares the wqe for fast path
lpfc_wqe_bpl2sgl - manages bpl to sgl conversion
lpfc_sli_wqe2iocb - converts a WQE to IOCB for SLI-3 path
- Add lpfc_sli3_iocb2wcqecmpl in completion path to convert an SLI-3
iocb completion to wcqe completion
- Refactor some of the code that works on both revs for clarity
Link: https://lore.kernel.org/r/20220225022308.16486-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Feb 2022 02:22:52 +0000 (18:22 -0800)]
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
Currently, SLI3 and SLI4 data paths use the same lpfc_iocbq structure.
This is a "common" structure but many of the components refer to sli-rev
specific entities which can lead the developer astray as to what they
actually mean, should be set to, or when they should be used.
This first patch prepares the lpfc_iocbq structure so that elements common
to both SLI3 and SLI4 data paths are more appropriately named, making it
clear they apply generically.
Fieldnames based on 'iocb' (sli3) or 'wqe' (sli4) which are actually
generic to the paths are renamed to 'cmd':
- iocb_flag is renamed to cmd_flag
- lpfc_vmid_iocb_tag is renamed to lpfc_vmid_tag
- fabric_iocb_cmpl is renamed to fabric_cmd_cmpl
- wait_iocb_cmpl is renamed to wait_cmd_cmpl
- iocb_cmpl and wqe_cmpl are combined and renamed to cmd_cmpl
- rsvd2 member is renamed to num_bdes due to pre-existing usage
The structure name itself will retain the iocb reference as changing to a
more relevant "job" or "cmd" title induces many hundreds of line changes
for only a name change.
lpfc_post_buffer is also renamed to lpfc_sli3_post_buffer to indicate use
in the SLI3 path only.
Link: https://lore.kernel.org/r/20220225022308.16486-2-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manish Rangankar [Thu, 10 Mar 2022 09:26:02 +0000 (01:26 -0800)]
scsi: qla2xxx: Use correct feature type field during RFF_ID processing
During SNS Register FC-4 Features (RFF_ID) the initiator driver was sending
incorrect type field for NVMe supported device. Use correct feature type
field.
Quinn Tran [Thu, 10 Mar 2022 09:26:00 +0000 (01:26 -0800)]
scsi: qla2xxx: Reduce false trigger to login
While a session is in the middle of a relogin, a late RSCN can be delivered
from switch. RSCN trigger fabric scan where the scan logic can trigger
another session login while a login is in progress. Reduce the extra
trigger to prevent multiple logins to the same session.
Quinn Tran [Thu, 10 Mar 2022 09:25:59 +0000 (01:25 -0800)]
scsi: qla2xxx: Fix laggy FC remote port session recovery
For session recovery, driver relies on the dpc thread to initiate certain
operations. The dpc thread runs exclusively without the Mailbox interface
being occupied. A recent code change for heartbeat check via mailbox cmd 0
is preventing the dpc thread from carrying out its operation. This patch
allows the higher priority error recovery to run first before running the
lower priority heartbeat check.
Quinn Tran [Thu, 10 Mar 2022 09:25:58 +0000 (01:25 -0800)]
scsi: qla2xxx: Fix hang due to session stuck
User experienced device lost. The log shows Get port data base command was
queued up, failed, and requeued again. Every time it is requeued, it set
the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring
because driver thinks a recovery is in progress for this session. In
essence, this session is hung. The reason it gets into this place is the
session deletion got in front of this call due to link perturbation.
Break the requeue cycle and exit. The session deletion code will trigger a
session relogin.
Link: https://lore.kernel.org/r/20220310092604.22950-8-njavali@marvell.com Fixes: 577bdb5ee4e0 ("qla2xxx: Add framework for async fabric discovery") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Thu, 10 Mar 2022 09:25:57 +0000 (01:25 -0800)]
scsi: qla2xxx: Fix N2N inconsistent PLOGI
For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS
pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This
is not consistent. Delete the session to restart the connection where ELS
pass through PLOGI would be used consistently.
Link: https://lore.kernel.org/r/20220310092604.22950-7-njavali@marvell.com Fixes: 2c1a9358222a ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Thu, 10 Mar 2022 09:25:53 +0000 (01:25 -0800)]
scsi: qla2xxx: Fix disk failure to rediscover
User experienced some of the LUN failed to get rediscovered after long
cable pull test. The issue is triggered by a race condition between driver
setting session online state vs starting the LUN scan process at the same
time. Current code set the online state after notifying the session is
available. In this case, trigger to start the LUN scan process happened
before driver could set the session in online state. LUN scan ends up with
failure due to the session online check was failing.
Set the online state before reporting of the availability of the session.
Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com Fixes: 5911f2d97b07 ("scsi: qla2xxx: Fix Remote port registration") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Thu, 10 Mar 2022 09:25:52 +0000 (01:25 -0800)]
scsi: qla2xxx: Fix incorrect reporting of task management failure
User experienced no task management error while target device is responding
with error. The RSP_CODE field in the status IOCB is in little endian.
Driver assumes it's big endian and it picked up erroneous data.
Convert the data back to big endian as is on the wire.
Commit 0e49b49181bc ("scsi: libiscsi: Fix UAF in
iscsi_conn_get_param()/iscsi_conn_teardown()") fixed an UAF in
iscsi_conn_get_param() and introduced 2 tmp_xxx varibles.
We can gracefully fix this UAF with the help of device_del(). Calling
iscsi_remove_conn() at the beginning of iscsi_conn_teardown would make
userspace unable to see iscsi_cls_conn. This way we we can free memory
safely.
Remove iscsi_destroy_conn() since it is no longer used.
Link: https://lore.kernel.org/r/20220310015759.3296841-4-haowenchao@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Wenchao Hao [Thu, 10 Mar 2022 01:57:58 +0000 (20:57 -0500)]
scsi: libiscsi: Add iscsi_cls_conn to sysfs after initialization
iscsi_create_conn() exposed iscsi_cls_conn to sysfs prior to initialization
of iscsi_conn's dd_data. When userspace tried to access an attribute such
as the connect address, a NULL pointer dereference was observed.
Do not add iscsi_cls_conn to sysfs until it has been initialized. Remove
iscsi_create_conn() since it is no longer used.
Link: https://lore.kernel.org/r/20220310015759.3296841-3-haowenchao@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Wenchao Hao [Thu, 10 Mar 2022 01:57:57 +0000 (20:57 -0500)]
scsi: iscsi: Add helper functions to manage iscsi_cls_conn
- iscsi_alloc_conn(): Allocate and initialize iscsi_cls_conn
- iscsi_add_conn(): Expose iscsi_cls_conn to userspace via sysfs
- iscsi_remove_conn(): Remove iscsi_cls_conn from sysfs
Link: https://lore.kernel.org/r/20220310015759.3296841-2-haowenchao@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Yang Li [Tue, 1 Mar 2022 08:04:48 +0000 (16:04 +0800)]
scsi: core: Remove unreachable code warning
The smatch tool reported the following warning:
drivers/scsi/scsi_error.c:1988 scsi_decide_disposition() warn: ignoring
unreachable code.
Remove the "default:return FAILED;" instead of "return FAILED;" reported by
smatch, because compilers can provide more useful diagnostics about
switch/case statements that do not have a default statement, especially if
the "switch" applies to a value with enumeration type.
Mingzhe Zou [Tue, 1 Mar 2022 07:55:00 +0000 (15:55 +0800)]
scsi: target: Add iscsi/cpus_allowed_list in configfs
The RX/TX threads for iSCSI connection can be scheduled to any online CPUs,
and will not be rescheduled.
When binding other heavy load threads along with iSCSI connection RX/TX
thread to the same CPU, the iSCSI performance will be worse.
Add iscsi/cpus_allowed_list in configfs. The available CPU set of iSCSI
connection RX/TX threads is allowed_cpus & online_cpus. If it is modified,
all RX/TX threads will be rescheduled.
John Garry [Fri, 11 Mar 2022 12:23:52 +0000 (20:23 +0800)]
scsi: hisi_sas: Use libsas internal abort support
Use the common libsas internal abort functionality.
In addition, this driver has special handling for internal abort timeouts -
specifically whether to reset the controller in that instance, so extend
the API for that.
Timeout is now increased to 20 * Hz from 6 * Hz.
We also retry for failure now, but this should not make a difference.
James Smart [Thu, 10 Mar 2022 15:48:45 +0000 (07:48 -0800)]
scsi: lpfc: Remove failing soft_wwn support
The soft_wwpn/soft_wwn functionality, which allows the driver to modify
service parameters in an attempt to override the adapter-assigned WWN, was
originally attempted to be removed roughly 6 yrs ago as new fabric features
were being introduced that clashed with the implementation. In the end,
the feature was left in with the user being responsible if things went
south.
We've reached a point where soft_wwn is no longer functional and is failing
in almost all production use cases. Use of Fabric features such as Fabric
Assigned WWPN and Automatic DPORT is now prevalent and the features require
coordination between the adapter and driver that can't be solved by the
simplistic update of the service parameters. As it is no longer functional,
the feature is to be removed.
There are still ways to override the adapter-assigned WWN but they require
the admin to invoke bios/efi level menus.
Link: https://lore.kernel.org/r/20220310154845.11125-1-jsmart2021@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Peter Wang [Mon, 7 Mar 2022 11:17:52 +0000 (19:17 +0800)]
scsi: ufs: core: scsi_get_lba() error fix
When ufs initializes without scmd->device->sector_size set, scsi_get_lba()
will get a wrong shift number and trigger an ubsan error. The shift
exponent 4294967286 is too large for the 64-bit type 'sector_t' (aka
'unsigned long long').
Call scsi_get_lba() only when opcode is READ_10/WRITE_10/UNMAP.
Sreekanth Reddy [Thu, 3 Mar 2022 14:02:30 +0000 (19:32 +0530)]
scsi: mpt3sas: Fix incorrect 4GB boundary check
The driver must perform its 4GB boundary check using the pool's DMA address
instead of using the virtual address.
Link: https://lore.kernel.org/r/20220303140230.13098-1-sreekanth.reddy@broadcom.com Fixes: df6c1c037d9f ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When scsi_dma_map() fails by returning a sges_left value less than zero,
the amount of logging produced can be extremely high. In a recent end-user
environment, 1200 messages per second were being sent to the log buffer.
This eventually overwhelmed the system and it stalled.
Jianglei Nie [Thu, 3 Mar 2022 01:51:15 +0000 (09:51 +0800)]
scsi: libfc: Fix use after free in fc_exch_abts_resp()
fc_exch_release(ep) will decrease the ep's reference count. When the
reference count reaches zero, it is freed. But ep is still used in the
following code, which will lead to a use after free.
Return after the fc_exch_release() call to avoid use after free.
Damien Le Moal [Tue, 1 Mar 2022 11:30:09 +0000 (20:30 +0900)]
scsi: scsi_debug: Fix qc_lock use in sdebug_blk_mq_poll()
The use of the 'locked' boolean variable to control locking and unlocking
of the qc_lock spinlock of struct sdebug_queue confuses sparse, leading to
a warning about an unexpected unlock. Simplify the qc_lock lock/unlock
handling code of this function to avoid this warning by removing the
'locked' boolean variable. This change also fixes unlocked access to the
in_use_bm bitmap with the find_first_bit() function.
The return statement inside the sdeb_read_lock(), sdeb_read_unlock(),
sdeb_write_lock() and sdeb_write_unlock() confuse sparse, leading to many
warnings about unexpected unlocks in the resp_xxx() functions.
Modify the lock/unlock functions using the __acquire() and __release()
inline annotations for the sdebug_no_rwlock == true case to avoid these
warnings.
Kernel messages produced during runtime PM can cause a never-ending cycle
because user space utilities (e.g. journald or rsyslog) write the messages
back to storage, causing runtime resume, more messages, and so on.
Messages that tell of things that are expected to happen, are arguably
unnecessary, so suppress them.
UFS driver messages are changes to from dev_err() to dev_dbg() which means
they will not display unless activated by dynamic debug of building with
-DDEBUG.
sdev->silence_suspend is set to skip messages from sd_suspend_common()
"Synchronizing SCSI cache", "Stopping disk" and scsi_report_sense()
"Power-on or device reset occurred" message (Note, that message appears
when the LUN is accessed after runtime PM, not during runtime PM)
Adrian Hunter [Mon, 28 Feb 2022 11:36:51 +0000 (13:36 +0200)]
scsi: core: sd: Add silence_suspend flag to suppress some PM messages
Kernel messages produced during runtime PM can cause a never-ending cycle
because user space utilities (e.g. journald or rsyslog) write the messages
back to storage, causing runtime resume, more messages, and so on.
Messages that tell of things that are expected to happen are arguably
unnecessary, so add a flag to suppress them. This flag is used by the UFS
driver.
Hannes Reinecke [Tue, 1 Mar 2022 14:37:18 +0000 (15:37 +0100)]
scsi: lpfc: Use rport as argument for lpfc_chk_tgt_mapped()
We only need the rport structure for lpfc_chk_tgt_mapped().
Link: https://lore.kernel.org/r/20220301143718.40913-6-hare@suse.de Cc: James Smart <james.smart@broadcom.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Mar 2022 14:37:17 +0000 (15:37 +0100)]
scsi: lpfc: Use rport as argument for lpfc_send_taskmgmt()
Instead of passing in a scsi_cmnd we should be using the rport; we already
have the target and LUN ID as parameters, so there's no need to pass the
scsi_cmnd too.
Link: https://lore.kernel.org/r/20220301143718.40913-5-hare@suse.de Cc: James Smart <james.smart@broadcom.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Mar 2022 14:37:16 +0000 (15:37 +0100)]
scsi: lpfc: Use fc_block_rport()
Use fc_block_rport() instead of fc_block_scsi_eh() as the SCSI command will
be removed as argument for SCSI EH functions.
Link: https://lore.kernel.org/r/20220301143718.40913-4-hare@suse.de Cc: James Smart <james.smart@broadcom.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Mar 2022 14:37:15 +0000 (15:37 +0100)]
scsi: lpfc: Drop lpfc_no_handler()
The default SCSI EH action for a non-existing EH callback is to return
FAILED, so having a callback just returning FAILED is pointless.
Link: https://lore.kernel.org/r/20220301143718.40913-3-hare@suse.de Cc: James Smart <james.smart@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 1 Mar 2022 14:37:14 +0000 (15:37 +0100)]
scsi: lpfc: Kill lpfc_bus_reset_handler()
lpfc_bus_reset_handler() is really just a loop calling
lpfc_target_reset_handler() over all targets, which is what the error
handler will be doing anyway.
Link: https://lore.kernel.org/r/20220301143718.40913-2-hare@suse.de Cc: James Smart <james.smart@broadcom.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Sat, 26 Feb 2022 23:04:33 +0000 (17:04 -0600)]
scsi: iscsi: ql4xxx: Use per-session workqueue for unbinding
We currently allocate a workqueue per host and only use it for removing the
target. For the session per host case we could be using this workqueue to
be able to do recoveries (block, unblock, timeout handling) in parallel. To
also allow offload drivers to do their session recoveries in parallel, this
drops the per host workqueue and replaces it with a per session one.
Mike Christie [Sat, 26 Feb 2022 23:04:31 +0000 (17:04 -0600)]
scsi: iscsi: Speed up session unblocking and removal
When the iSCSI class was added upstream, blocking a queue was fast because
it just set some flag bits and didn't handle I/O that was in the process of
being sent to the driver. That's no longer the case so blocking a queue is
expensive and we can end up with a backlog of blocks by the time we have
relogged in and are trying to start the queues.
For the session unblock case, this has try to cancel the block and recovery
work in case they are still queued so we can avoid unneeded queue
manipulations. For removal, we also now try to cancel all the recovery
related works since a couple lines down we will set the session and device
state so running those functions are not necessary.
Mike Christie [Sat, 26 Feb 2022 23:04:30 +0000 (17:04 -0600)]
scsi: iscsi: Fix recovery and unblocking race
If the user sets the iscsi_eh_timer_workq/iscsi_eh workqueue's max_active
to greater than 1, the recovery_work could be running when
__iscsi_unblock_session() runs. The cancel_delayed_work() will then not
wait for the running work and we can race where we end up with the wrong
session state and scsi_device state set.
This replaces the cancel_delayed_work() with the sync version.
James Smart [Tue, 1 Mar 2022 17:55:36 +0000 (09:55 -0800)]
scsi: scsi_transport_fc: Fix FPIN Link Integrity statistics counters
In the original FPIN commit, stats were incremented by the event_count.
Event_count is the minimum # of events that must occur before an FPIN is
sent. Thus, its not the actual number of events, and could be significantly
off (too low) as it doesn't reflect anything not reported. Rather than
attempt to count events, have the statistic count how many FPINS cross the
threshold and were reported.
Link: https://lore.kernel.org/r/20220301175536.60250-1-jsmart2021@gmail.com Fixes: 27f6897c3789 ("scsi: fc: Parse FPIN packets and update statistics") Cc: <stable@vger.kernel.org> # v5.11+ Cc: Shyam Sundar <ssundar@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Mon, 28 Feb 2022 09:48:57 +0000 (18:48 +0900)]
scsi: libsas: Clean up sas_form_port()
Sparse throws a warning about context imbalance ("different lock contexts
for basic block") in sas_form_port() as it gets confused with the fact that
a port is locked within one of the two search loops and unlocked afterward
outside of the search loops once the phy is added to the port. Since this
code is not easy to follow, improve it by factoring out the code adding the
phy to the port once the port is locked into the helper function
sas_form_port_add_phy(). This helper can then be called directly within the
port search loops, avoiding confusion and clearing the sparse warning.
This header is empty now except for an include of <linux/blk-mq.h>, so
remove it.
Link: https://lore.kernel.org/r/20220224175552.988286-9-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let submitters initialize the scmd->allowed field directly instead of
indirecting through struct scsi_request and remove the now superfluous
structure.
Link: https://lore.kernel.org/r/20220224175552.988286-8-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: core: Move the result field from struct scsi_request to struct scsi_cmnd
Prepare for removing the scsi_request structure by moving the result field
to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220224175552.988286-7-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: core: Move the resid_len field from struct scsi_request to struct scsi_cmnd
Prepare for removing the scsi_request structure by moving the resid_len
field to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220224175552.988286-6-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: core: Remove the sense and sense_len fields from struct scsi_request
Just use the sense_buffer field in struct scsi_cmnd for the sense data and
move the sense_len field over to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220224175552.988286-5-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: core: Remove the cmd field from struct scsi_request
Now that each scsi_request is backed by a scsi_cmnd, there is no need to
indirect the CDB storage. Change all submitters of SCSI passthrough
requests to store the CDB information directly in the scsi_cmnd, and while
doing so allocate the full 32 bytes that cover all Linux supported SCSI
hosts instead of requiring dynamic allocation for > 16 byte CDBs. On
64-bit systems this does not change the size of the scsi_cmnd at all, while
on 32-bit systems it slightly increases it for now, but that increase will
be made up by the removal of the remaining scsi_request fields.
Link: https://lore.kernel.org/r/20220224175552.988286-4-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: core: Don't memset() the entire scsi_cmnd in scsi_init_command()
Replace the big fat memset that requires saving and restoring various
fields with just initializing those fields that need initialization.
All the clearing to 0 is moved to scsi_prepare_cmd() as scsi_ioctl_reset()
alreadly uses kzalloc() to allocate a pre-zeroed command.
This is still conservative and can probably be optimized further.
Link: https://lore.kernel.org/r/20220224175552.988286-3-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copy directly from the se_cmd CDB to the one in the scsi_request. This
temporarily limits the pscsi backend to supporting only up to 16 byte CDBs,
but this restriction will be lifted later in this series.
John Garry [Fri, 25 Feb 2022 10:57:36 +0000 (18:57 +0800)]
scsi: libsas: Use bool for queue_work() return code
Function queue_work() returns a bool, so use a bool to hold this value for
the return code from callers, which should make the code a tiny bit more
clear.
Also take this opportunity to condense the code of the those callers, such
as sas_queue_work(), as suggested by Damien.
In case of SSP underflow allow the response frame IU to be examined for
setting the response stat value rather than always setting
SAS_DATA_UNDERRUN.
This will mean that we call sas_ssp_task_response() in those scenarios and
may send sense data to upper layer.
Such a condition would be for bad blocks were we just reporting an
underflow error to upper layer, but now the sense data will tell
immediately that the media is faulty.
Qi Liu [Thu, 24 Feb 2022 11:51:26 +0000 (19:51 +0800)]
scsi: hisi_sas: Free irq vectors in order for v3 HW
If the driver probe fails to request the channel IRQ or fatal IRQ, the
driver will free the IRQ vectors before freeing the IRQs in free_irq(),
and this will cause a kernel BUG like this:
The time of phyup not only depends on the controller but also the type of
disk connected. As an example, from experience, for some SATA disks the
amount of time from reset/power-on to receive the D2H FIS for phyup can
take upto and more than 10s sometimes. According to the specification of
some SATA disks such as ST14000NM0018, the max time from power-on to ready
is 30s.
Based on this the current timeout of phyup at 2s which is not enough. So
set the value as HISI_SAS_WAIT_PHYUP_TIMEOUT (30s) in
hisi_sas_control_phy().
For v3 hw there is a pre-existing workaround for a HW bug, being that we
issue a link reset when the OOB occurs but the phyup does not. The current
phyup timeout is HISI_SAS_WAIT_PHYUP_TIMEOUT. So if this does occur from
when issuing a phy enable or similar via hisi_sas_control_phy(), the
subsequent HW workaround linkreset processing calls hisi_sas_control_phy(),
but this will pend the original phy reset timing out, so it is safe.
Xiang Chen [Thu, 24 Feb 2022 11:51:24 +0000 (19:51 +0800)]
scsi: hisi_sas: Change permission of parameter prot_mask
Currently the permission of parameter prot_mask is 0x0, which means that
the member does not appear in sysfs. Change it as other module parameters
to 0444 for world-readable.
[mkp: s/v3/v2/]
Link: https://lore.kernel.org/r/1645703489-87194-2-git-send-email-john.garry@huawei.com Fixes: e474b18e2f82 ("scsi: hisi_sas: Add support for DIF feature for v2 hw") Reported-by: Yihang Li <liyihang6@hisilicon.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Randy Dunlap [Wed, 23 Feb 2022 00:06:23 +0000 (16:06 -0800)]
scsi: aha152x: Fix aha152x_setup() __setup handler return value
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; doing so just pollutes init's
environment with strings that are not init arguments/parameters).
Return 1 from aha152x_setup() to indicate that the boot option has been
handled.
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Link: https://lore.kernel.org/r/20220223000623.5920-1-rdunlap@infradead.org Cc: "Juergen E. Fischer" <fischer@norbit.de> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ajish Koshy [Tue, 22 Feb 2022 09:26:18 +0000 (14:56 +0530)]
scsi: pm80xx: Handle non-fatal errors
Firmware expects host driver to clear scratchpad rsvd 0 register after
non-fatal error is found.
This is done when firmware raises fatal error interrupt and indicates
non-fatal error. At this point firmware updates scratchpad rsvd 0 register
with non-fatal error value. Here host has to clear the register after
reading it during non-fatal errors.
Rename:
- MSGU_HOST_SCRATCH_PAD_6 to MSGU_SCRATCH_PAD_RSVD_0
- MSGU_HOST_SCRATCH_PAD_7 to MSGU_SCRATCH_PAD_RSVD_1
Link: https://lore.kernel.org/r/20220222092618.108198-1-Ajish.Koshy@microchip.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Finn Thain [Mon, 21 Feb 2022 23:09:42 +0000 (10:09 +1100)]
scsi: mac53c94: Stop using struct scsi_pointer
This driver doesn't use SCp.ptr to save a SCSI command data pointer which
means "scsi pointer" is a complete misnomer here. Only a few members of
struct scsi_pointer are used and the rest waste memory. Avoid the "struct
foo { struct bar; };" silliness.
Finn Thain [Mon, 21 Feb 2022 23:09:42 +0000 (10:09 +1100)]
scsi: mesh: Stop using struct scsi_pointer
This driver doesn't use SCp.ptr to save a SCSI command data pointer which
means "scsi pointer" is a complete misnomer here. Only a few members of
struct scsi_pointer are used and the rest waste memory. Avoid the "struct
foo { struct bar; };" silliness.
scsi: core: docs: Update notes about scsi_times_out
Most importantly: eh_timed_out() is not limited by scmd->allowed, and can
reset timer forever.
Fixes: 243e5823d04f ("[SCSI] FC transport : Avoid device offline cases by stalling aborts until device unblocked") Link: https://lore.kernel.org/r/20220219001601.3534043-1-khazhy@google.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
projects / kernel.git / log