Remove now incorrect comment regarding port 5 as GMAC5. This is supposed to
be supported since commit 347b5aa9eb37 ("net: dsa: mt7530: Add support for
port 5") under mt7530_setup_port5().
Fixes: 347b5aa9eb37 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230310073338.5836-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Previously we would divide total_left_rate by zero if num_vports
happened to be 1 because non_requested_count is calculated as
num_vports - req_count. Guard against this by validating num_vports at
the beginning and returning an error otherwise.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
When performing a stress test on SMC-R by rmmod mlx5_ib driver
during the wrk/nginx test, we found that there is a probability
of triggering a panic while terminating all link groups.
This issue dues to the race between smc_smcr_terminate_all()
and smc_buf_create().
__softirqentry_text_start
smc_wr_tx_process_cqe
smc_cdc_tx_handler
READ(conn->sndbuf_desc->len);
/* panic dues to NULL sndbuf_desc */
conn->sndbuf_desc = xxx;
This patch tries to fix the issue by always to check the sndbuf_desc
before send any cdc msg, to make sure that no null pointer is
seen during cqe processing.
Fixes: 4e35e861bd17 ("net/smc: immediate termination for SMCR link groups") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/1678263432-17329-1-git-send-email-alibuda@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It seems that commit 2940dc05585a ("drm/i915/sseu: Don't try to store EU
mask internally in UAPI format") exposed a potential out-of-bounds
access, reported by UBSAN as following on a laptop with a gen 11 i915
card:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/i915/gt/intel_sseu.c:65:27
index 6 is out of range for type 'u16 [6]'
CPU: 2 PID: 165 Comm: systemd-udevd Not tainted 6.2.0-9-generic #9-Ubuntu
Hardware name: Dell Inc. XPS 13 9300/077Y9N, BIOS 1.11.0 03/22/2022
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x3a
__ubsan_handle_out_of_bounds.cold+0x42/0x47
gen11_compute_sseu_info+0x121/0x130 [i915]
intel_sseu_info_init+0x15d/0x2b0 [i915]
intel_gt_init_mmio+0x23/0x40 [i915]
i915_driver_mmio_probe+0x129/0x400 [i915]
? intel_gt_probe_all+0x91/0x2e0 [i915]
i915_driver_probe+0xe1/0x3f0 [i915]
? drm_privacy_screen_get+0x16d/0x190 [drm]
? acpi_dev_found+0x64/0x80
i915_pci_probe+0xac/0x1b0 [i915]
...
According to the definition of sseu_dev_info, eu_mask->hsw is limited to
a maximum of GEN_MAX_SS_PER_HSW_SLICE (6) sub-slices, but
gen11_sseu_info_init() can potentially set 8 sub-slices, in the
!IS_JSL_EHL(gt->i915) case.
Fix this by reserving up to 8 slots for max_subslices in the eu_mask
struct.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Fixes: 2940dc05585a ("drm/i915/sseu: Don't try to store EU mask internally in UAPI format") Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230220171858.131416-1-andrea.righi@canonical.com
(cherry picked from commit 518d7d39e94439e9ccc7ea21b897b7d54297fb08) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently we are using hardcoded 7 for io and fast wake lines.
According to Bspec io and fast wake times are both 42us for
DISPLAY_VER >= 12 and 50us and 32us for older platforms.
Calculate line counts for these and configure them into PSR2_CTL
accordingly
Use 45 us for the fast wake calculation as 42 seems to be too
tight based on testing.
Bspec: 49274, 4289
Cc: Mika Kahola <mika.kahola@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: 1c82d5ae0254 ("drm/i915/psr: Program default IO buffer Wake and Fast Wake") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7725 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230221085304.3382297-1-jouni.hogander@intel.com
(cherry picked from commit 1d43cdc7e3fdd066200175fa2f13c2c08054921d) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On s390 PCI functions may be hotplugged individually even when they
belong to a multi-function device. In particular on an SR-IOV device VFs
may be removed and later re-added.
In commit 9f075e2b9fd8 ("s390/pci: separate zbus creation from
scanning") it was missed however that struct pci_bus and struct
zpci_bus's resource list retained a reference to the PCI functions MMIO
resources even though those resources are released and freed on
hot-unplug. These stale resources may subsequently be claimed when the
PCI function re-appears resulting in use-after-free.
One idea of fixing this use-after-free in s390 specific code that was
investigated was to simply keep resources around from the moment a PCI
function first appeared until the whole virtual PCI bus created for
a multi-function device disappears. The problem with this however is
that due to the requirement of artificial MMIO addreesses (address
cookies) extra logic is then needed to keep the address cookies
compatible on re-plug. At the same time the MMIO resources semantically
belong to the PCI function so tying their lifecycle to the function
seems more logical.
Instead a simpler approach is to remove the resources of an individually
hot-unplugged PCI function from the PCI bus's resource list while
keeping the resources of other PCI functions on the PCI bus untouched.
This is done by introducing pci_bus_remove_resource() to remove an
individual resource. Similarly the resource also needs to be removed
from the struct zpci_bus's resource list. It turns out however, that
there is really no need to add the MMIO resources to the struct
zpci_bus's resource list at all and instead we can simply use the
zpci_bar_struct's resource pointer directly.
Fixes: 9f075e2b9fd8 ("s390/pci: separate zbus creation from scanning") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230306151014.60913-2-schnelle@linux.ibm.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Starting from an used_idx different than 0 is needed in use cases like
virtual machine migration. Not doing so and letting the caller set an
avail idx different than 0 causes destination device to try to use old
buffers that source driver already recover and are not available
anymore.
Since vdpa_sim does not support receive inflight descriptors as a
destination of a migration, let's set both avail_idx and used_idx the
same at vq start. This is how vhost-user works in a
VHOST_SET_VRING_BASE call.
Although the simple fix is to set last_used_idx at vdpasim_set_vq_state,
it would be reset at vdpasim_queue_ready. The last_avail_idx case is
fixed with commit 6a52d6f4cc11 ("vdpa_sim: not reset state in
vdpasim_queue_ready"). Since the only option is to make it equal to
last_avail_idx, adding the only change needed here.
This was discovered and tested live migrating the vdpa_sim_net device.
vdpasim_queue_ready calls vringh_init_iotlb, which resets split indexes.
But it can be called after setting a ring base with
vdpasim_set_vq_state.
Fix it by stashing them. They're still resetted in vdpasim_vq_reset.
This was discovered and tested live migrating the vdpa_sim_net device.
Fixes: a903b8ae96c5 ("vdpasim: vDPA device simulator") Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230118164359.1523760-2-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently vhost_vdpa_cleanup() unmaps the DMA mappings by calling
`iommu_unmap(v->domain, map->start, map->size);`
from vhost_vdpa_general_unmap() when the parent vDPA driver doesn't
provide DMA config operations.
However, the IOMMU domain referred to by `v->domain` is freed in
vhost_vdpa_free_domain() before vhost_vdpa_cleanup() in
vhost_vdpa_release() which results in NULL pointer de-reference.
Accordingly, moving the call to vhost_vdpa_free_domain() in
vhost_vdpa_cleanup() would makes sense. This will also help
detaching the dma device in error handling of vhost_vdpa_alloc_domain().
This issue was observed on terminating QEMU with SIGQUIT.
Fixes: 9f4cf5306241 ("vhost-vdpa: call vhost_vdpa_cleanup during the release") Signed-off-by: Gautam Dawar <gautam.dawar@amd.com>
Message-Id: <20230301163203.29883-1-gautam.dawar@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the driver detects during probe that firmware is in recovery
mode then i40e_init_recovery_mode() is called and the rest of
probe function is skipped including pci_set_drvdata(). Subsequent
i40e_shutdown() called during shutdown/reboot dereferences NULL
pointer as pci_get_drvdata() returns NULL.
To fix call pci_set_drvdata() also during entering to recovery mode.
Reproducer:
1) Lets have i40e NIC with firmware in recovery mode
2) Run reboot
For l3s mode, skb->dev is set to ipvlan interface in ipvlan_nf_input():
skb->dev = addr->master->dev
but, skb->skb_iif remain unchanged, this will cause socket lookup failed
if a target socket is bound to a interface, like the following example:
ip link add ipvlan0 link eth0 type ipvlan mode l3s
ip addr add dev ipvlan0 192.168.124.111/24
ip link set ipvlan0 up
ping -c 1 -I ipvlan0 8.8.8.8
100% packet loss
This is because there is no match sk in __raw_v4_lookup() as sk->sk_bound_dev_if != dif(skb->skb_iif).
Fix this by make skb->skb_iif track skb->dev in ipvlan_nf_input().
Fixes: 59a4e9c06fe1 ("ipvlan: decouple l3s mode dependencies from other modes") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/29865b1f-6db7-c07a-de89-949d3721ea30@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
struct pn533_out_arg used as a temporary context for out_urb is not
initialized properly. Its uninitialized 'phy' field can be dereferenced in
error cases inside pn533_out_complete() callback function. It causes the
following failure:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441
Call Trace:
<IRQ>
__usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671
usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754
dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988
call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700
expire_timers+0x234/0x330 kernel/time/timer.c:1751
__run_timers kernel/time/timer.c:2022 [inline]
__run_timers kernel/time/timer.c:1995 [inline]
run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035
__do_softirq+0x1fb/0xaf6 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:650
irq_exit_rcu+0x9/0x20 kernel/softirq.c:662
sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107
Initialize the field with the pn533_usb_phy currently used.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 7a7bd7797884 ("nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()") Reported-by: syzbot+1e608ba4217c96d1952f@syzkaller.appspotmail.com Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230309165050.207390-1-pchelkin@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If, e.g. in AP mode, the link was already created by userspace
but not activated yet, it has a chandef but the chandef isn't
valid and has no channel. Check for this and ignore this link.
Otherwise the virtqueue object to instate could point to invalid address
that was unmapped from the MTT:
mlx5_core 0000:41:04.2: mlx5_cmd_out_err:782:(pid 8321):
CREATE_GENERAL_OBJECT(0xa00) op_mod(0xd) failed, status
bad parameter(0x3), syndrome (0x5fa1c), err(-22)
Fixes: 3b75f588d29a ("vdpa/mlx5: Implement susupend virtqueue callback") Cc: Eli Cohen <elic@nvidia.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Eli Cohen <elic@nvidia.com>
Message-Id: <1676424640-11673-1-git-send-email-si-wei.liu@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
tcp_rtx_synack() now could be called in process context as explained in 49fcad7fb3b9 ("tcp: tcp_rtx_synack() can be called from process
context").
tcp_rtx_synack() might call tcp_make_synack(), which will touch per-CPU
variables with preemption enabled. This causes the following BUG:
BUG: using __this_cpu_add() in preemptible [00000000] code: ThriftIO1/5464
caller is tcp_make_synack+0x841/0xac0
Call Trace:
<TASK>
dump_stack_lvl+0x10d/0x1a0
check_preemption_disabled+0x104/0x110
tcp_make_synack+0x841/0xac0
tcp_v6_send_synack+0x5c/0x450
tcp_rtx_synack+0xeb/0x1f0
inet_rtx_syn_ack+0x34/0x60
tcp_check_req+0x3af/0x9e0
tcp_rcv_state_process+0x59b/0x2030
tcp_v6_do_rcv+0x5f5/0x700
release_sock+0x3a/0xf0
tcp_sendmsg+0x33/0x40
____sys_sendmsg+0x2f2/0x490
__sys_sendmsg+0x184/0x230
do_syscall_64+0x3d/0x90
Avoid calling __TCP_INC_STATS() with will touch per-cpu variables. Use
TCP_INC_STATS() which is safe to be called from context switch.
Fixes: c627d7bd3489 ("tcp: TCP Fast Open Server - support TFO listeners") Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230308190745.780221-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
scsi_proc_hostdir_rm() decreases a reference counter and hence must only be
called once per host that is removed. This change does not require a
scsi_add_host_with_dma() change since scsi_add_host_with_dma() will return
0 (success) if scsi_proc_host_add() is called.
Some storage, such as AIX VDASD (virtual storage) and IBM 2076 (front
end), fail as a result of commit 9840b16b6e7a ("scsi: core: Query VPD
size before getting full page").
That commit changed getting SCSI VPD pages so that we now read just
enough of the page to get the actual page size, then read the whole
page in a second read. The problem is that the above mentioned
hardware returns zero for the page size, because of a firmware
error. In such cases, until the firmware is fixed, this new blacklist
flag says to revert to the original method of reading the VPD pages,
i.e. try to read a whole buffer's worth on the first try.
[mkp: reworked somewhat]
Fixes: 9840b16b6e7a ("scsi: core: Query VPD size before getting full page") Reported-by: Martin Wilck <mwilck@suse.com> Suggested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Duncan <lduncan@suse.com> Link: https://lore.kernel.org/r/20220928181350.9948-1-leeman.duncan@gmail.com Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The values in the protocol registers are two bytes wide. However, when
parsing the register loads, the code currently uses the larger 16-byte
size of a `union nf_inet_addr`. Change it to use the (correct) size of
a `union nf_conntrack_man_proto` instead.
The values in the protocol registers are two bytes wide. However, when
parsing the register loads, the code currently uses the larger 16-byte
size of a `union nf_inet_addr`. Change it to use the (correct) size of
a `union nf_conntrack_man_proto` instead.
Fixes: c046ad4f3bbe ("netfilter: nft_masq: support port range") Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The values in the protocol registers are two bytes wide. However, when
parsing the register loads, the code currently uses the larger 16-byte
size of a `union nf_inet_addr`. Change it to use the (correct) size of
a `union nf_conntrack_man_proto` instead.
CONTROLLER_IN_GPU() is clearly intended to match only Intel devices, but
previously it checked only the PCI Device ID, not the Vendor ID, so it
could match devices from other vendors that happened to use the same Device
ID.
Update CONTROLLER_IN_GPU() so it matches only Intel devices.
Fixes: 6ab9beb9047e ("ALSA: hda - Abort the probe without i915 binding for HSW/B") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230307214054.886721-1-helgaas@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
As part of Task Management handling, the driver will disable and enable the
MSIx index zero which belongs to the Admin reply queue. During this
transition the driver loses some interrupts and this leads to Admin request
and ioctl timeouts.
After enabling the interrupts, poll the Admin reply queue to avoid
timeouts.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 6d290ac5b58a ("scsi: mpi3mr: Fix expander node leak in mpi3mr_remove()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Port is allocated by sas_port_alloc_num() and rphy is allocated by either
sas_end_device_alloc() or sas_expander_alloc(), all of which may return
NULL. So we need to check the rphy to avoid possible NULL pointer access.
If sas_rphy_add() returned with failure, rphy is set to NULL. We would
access the rphy in the following lines which would also result NULL pointer
access.
Fixes: 3ba756e7a02d ("scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()") Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Link: https://lore.kernel.org/r/20230225100135.2109330-1-haowenchao2@huawei.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: 7d426ee9e224 ("clk: enable hi655x common clk automatically") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Riku Voipio <riku.voipio@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-3-rdunlap@infradead.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Playing media with a resolution smaller than the crtc size requires the
video overlay to be scaled for output and GXM boards display a 1px pink
line on the bottom of the scaled overlay. Comparing with the downstream
vendor driver revealed VPP_DUMMY_DATA not being set [0].
Setting VPP_DUMMY_DATA prevents the 1px pink line from being seen.
Lockdep warns about potential circular locking dependency of devfreq
with the fs_reclaim caused by immediate device suspension when mapping is
released by shrinker. Fix it by doing the suspension asynchronously.
1. APP1 continuously creates lots of small GEMs
2. APP2 triggers `drop_caches`
3. Shrinker starts to evict APP1 GEMs, while APP1 produces new purgeable
GEMs
4. msm_gem_shrinker_scan() returns non-zero number of freed pages
and causes shrinker to try shrink more
5. msm_gem_shrinker_scan() returns non-zero number of freed pages again,
goto 4
6. The APP2 is blocked in `drop_caches` until APP1 stops producing
purgeable GEMs
To prevent this blocking scenario, check number of remaining pages
that GPU shrinker couldn't release due to a GEM locking contention
or shrinking rejection. If there are no remaining pages left to shrink,
then there is no need to free up more pages and shrinker may break out
from the loop.
This problem was found during shrinker/madvise IOCTL testing of
virtio-gpu driver. The MSM driver is affected in the same way.
Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 04a0d2f95e85 ("drm/msm/gem: Convert to using drm_gem_lru") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-2-dmitry.osipenko@collabora.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
The "vdev->dev.parent" should be used instead of "vdev->dev" as a device
for which to perform the DMA operation in both
virtio_gpu_cmd_transfer_to_host_2d(3d).
Because the virtio-gpu device "vdev->dev" doesn't really have DMA OPS
assigned to it, but parent (virtio-pci or virtio-mmio) device
"vdev->dev.parent" has. The more, the sgtable in question the code is
trying to sync here was mapped for the parent device (by using its DMA OPS)
previously at:
virtio_gpu_object_shmem_init()->drm_gem_shmem_get_pages_sgt()->
dma_map_sgtable(), so should be synced here for the same parent device.
xfrm state selectors are matched against the inner-most flow
which can be of any address family. Therefore middle states
in nested configurations need to carry a wildcard selector in
order to work at all.
However, this is currently forbidden for transport-mode states.
Fix this by removing the unnecessary check.
Fixes: 4701323acddc ("[IPSEC]: Rename mode to outer_mode and add inner_mode") Reported-by: David George <David.George@sophos.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With CONFIG_VIRTIO_UML=y, GNU ld < 2.36 fails to link UML vmlinux
(w/wo CONFIG_LD_SCRIPT_STATIC).
`.exit.text' referenced in section `.uml.exitcall.exit' of arch/um/drivers/virtio_uml.o: defined in discarded section `.exit.text' of arch/um/drivers/virtio_uml.o
collect2: error: ld returned 1 exit status
This fix is similar to the following commits:
- f16784fb4712 ("powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT")
- d0b09f9bf044 ("s390: define RUNTIME_DISCARD_EXIT to fix link error
with GNU ld < 2.36")
- ad886b09257c ("sh: define RUNTIME_DISCARD_EXIT")
Fixes: fe15ce495a51 ("arch: fix broken BuildID for arm64 and riscv") Reported-by: SeongJae Park <sj@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: SeongJae Park <sj@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A user should be allowed to take out a lease via an idmapped mount if
the fsuid matches the mapped uid of the inode. generic_setlease() is
checking the unmapped inode uid, causing these operations to be denied.
Fix this by comparing against the mapped inode uid instead of the
unmapped uid.
[Why]
MALL size available can vary for different SKUs.
Use num_chans read from VBIOS to determine the available MALL size we can use
[How]
Define max_chans for DCN32 and DCN321.
If num_chans is max_chans, then return max_chans as we can access the
entire MALL space.
Otherwise, define avail_chans as the number of available channels we are
allowed instead.
Return corresponding number of channels back and use this to calculate
available MALL size.
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable subvp on specifically 1440p@60hz displays even though it can
switch in vactive.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Gain control is badly documented in publicly available (including
leaked) documentation.
There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value
(plus an enable bit in bit 6). The driver hardcodes it to 0x43, which
one application note states is equal to x1.047. The documentation also
states that 0x40 is equel to x1.000. The pre-gain thus seems to be
expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984.
What the pre-gain does is however unspecified.
There is then an AGC gain limit, in registers 0x3a18 and 0x3a19,
expressed as a 10-bit "real gain format" value. One application note
sets it to 0x00f8 and states it is equal to x15.5, so it appears to be
expressed in 1/16 increments, up to x63.9375.
The manual gain is stored in registers 0x350a and 0x350b, also as a
10-bit "real gain format" value. It is documented in the application
note as a Q6.4 values, up to x63.9375.
One version of the datasheet indicates that the sensor supports a
digital gain:
The OV5640 supports 1/2/4 digital gain. Normally, the gain is
controlled automatically by the automatic gain control (AGC) block.
It isn't clear how that would be controlled manually.
There appears to be no indication regarding whether the gain controlled
through registers 0x350a and 0x350b is an analogue gain only or also
includes digital gain. The words "real gain" don't necessarily mean
"combined analogue and digital gains". Some OmniVision sensors (such as
the OV8858) are documented as supoprting different formats for the gain
values, selectable through a register bit, and they are called "real
gain format" and "sensor gain format". For that sensor, we have (one of)
the gain registers documented as
0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are
fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain
If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse
gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1,
gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain,
0x70 is 4x gain
(The second part of the text makes little sense)
"Real gain" may thus refer to the combination of the coarse and fine
analogue gains as a single value.
The OV5640 0x350a and 0x350b registers thus appear to control analogue
gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific
control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it.
If registers 0x350a and 0x350b are later found to control digital gain
as well, the driver could then restrict the range of the analogue gain
control value to lower than x64 and add a separate digital gain control.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the follow-up of commit 52be3ae197b8 ("kbuild: fix SIGPIPE error
message for AR=gcc-ar and AR=llvm-ar"), Kees Cook pointed out that
tools should _not_ catch their own SIGPIPEs [1] [2].
Based on his feedback, LLVM was fixed [3].
However, Python's default behavior is to show noisy bracktrace when
SIGPIPE is sent. So, scripts written in Python are basically in the
same situation as the buggy llvm tools.
Example:
$ make -s allnoconfig
$ make -s allmodconfig
$ scripts/diffconfig .config.old .config | head -n1
-ALIX n
Traceback (most recent call last):
File "/home/masahiro/linux/scripts/diffconfig", line 132, in <module>
main()
File "/home/masahiro/linux/scripts/diffconfig", line 130, in main
print_config("+", config, None, b[config])
File "/home/masahiro/linux/scripts/diffconfig", line 64, in print_config
print("+%s %s" % (config, new_value))
BrokenPipeError: [Errno 32] Broken pipe
Python documentation [4] notes how to make scripts die immediately and
silently:
"""
Piping output of your program to tools like head(1) will cause a
SIGPIPE signal to be sent to your process when the receiver of its
standard output closes early. This results in an exception like
BrokenPipeError: [Errno 32] Broken pipe. To handle this case,
wrap your entry point to catch this exception as follows:
import os
import sys
def main():
try:
# simulate large output (your code replaces this loop)
for x in range(10000):
print("y")
# flush output here to force SIGPIPE to be triggered
# while inside this try block.
sys.stdout.flush()
except BrokenPipeError:
# Python flushes standard streams on exit; redirect remaining output
# to devnull to avoid another BrokenPipeError at shutdown
devnull = os.open(os.devnull, os.O_WRONLY)
os.dup2(devnull, sys.stdout.fileno())
sys.exit(1) # Python exits with error code 1 on EPIPE
if __name__ == '__main__':
main()
Do not set SIGPIPE’s disposition to SIG_DFL in order to avoid
BrokenPipeError. Doing that would cause your program to exit
unexpectedly whenever any socket connection is interrupted while
your program is still writing to it.
"""
Currently, tools/perf/scripts/python/intel-pt-events.py seems to be the
only script that fixes the issue that way.
tools/perf/scripts/python/compaction-times.py uses another approach
signal.signal(signal.SIGPIPE, signal.SIG_DFL) but the Python
documentation clearly says "Don't do it".
I cannot fix all Python scripts since there are so many.
I fixed some in the scripts/ directory.
drivers/macintosh/windfarm_lm75_sensor.c:63:14: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
lm->inited = 1;
^ ~
drivers/macintosh/windfarm_smu_sensors.c:356:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
pow->fake_volts = 1;
^ ~
drivers/macintosh/windfarm_smu_sensors.c:368:18: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
pow->quadratic = 1;
^ ~
There is no bug here since no code checks the actual value of these
fields, just whether or not they are zero (boolean context), but this
can be easily fixed by switching to an unsigned type.
Previously, R_ALPHA_LITERAL relocations would overflow for large kernel
modules.
This was because the Alpha's apply_relocate_add was relying on the kernel's
module loader to have sorted the GOT towards the very end of the module as it
was mapped into memory in order to correctly assign the global pointer. While
this behavior would mostly work fine for small kernel modules, this approach
would overflow on kernel modules with large GOT's since the global pointer
would be very far away from the GOT, and thus, certain entries would be out of
range.
This patch fixes this by instead using the Tru64 behavior of assigning the
global pointer to be 32KB away from the start of the GOT. The change made
in this patch won't work for multi-GOT kernel modules as it makes the
assumption the module only has one GOT located at the beginning of .got,
although for the vast majority kernel modules, this should be fine. Of the
kernel modules that would previously result in a relocation error, none of
them, even modules like nouveau, have even come close to filling up a single
GOT, and they've all worked fine under this patch.
Signed-off-by: Edward Humes <aurxenon@lunos.org> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In order for KCSAN to increase its likelihood of observing a data race,
it sets a watchpoint on memory accesses and stalls, allowing for
detection of conflicting accesses by other kernel threads or interrupts.
Stalls are implemented by injecting a call to udelay in instrumented code.
To prevent recursive instrumentation, exclude udelay from being instrumented.
The early paca and boot cpuid dance is complicated and currently does
not quite work as expected for boot cpuid != 0 cases.
early_init_devtree() currently allocates the paca_ptrs and boot cpuid
paca, but until that returns and early_setup() calls setup_paca(), this
thread is currently still executing with smp_processor_id() == 0.
One problem this causes is the paca_ptrs[smp_processor_id()] pointer is
poisoned, so valid_emergency_stack() (any backtrace) and any similar
users will crash.
Another is that the hardware id which is set here will not be returned
by get_hard_smp_processor_id(smp_processor_id()), but it would work
correctly for boot_cpuid == 0, which could lead to difficult to
reproduce or find bugs. The hard id does not seem to be used by the rest
of early_init_devtree(), it just looks like all this code might have
been put here to allocate somewhere to store boot CPU hardware id while
scanning the devtree.
Rearrange things so the hwid is put in a global variable like
boot_cpuid, and do all the paca allocation and boot paca setup in the
64-bit early_setup() after we have everything ready to go.
The paca_ptrs[0] re-poisoning code in early_setup does not seem to have
ever worked, because paca_ptrs[0] was never not-poisoned when boot_cpuid
is not 0.
powerpc/64 can boot on a non-zero SMP processor id. Initially, the boot
CPU is said to be "assumed to be 0" until early_init_devtree() discovers
the id from the device tree. That is not a good description because the
assumption can be wrong and that has to be handled, the better
description is that 0 is used as a placeholder, and things are fixed
after the real id is discovered.
smp_processor_id() is set to the boot cpuid, but task_cpu(current) is
not, which causes the smp_processor_id() == task_cpu(current) invariant
to be broken until init_idle() in sched_init().
This is quite fragile and could lead to subtle bugs in future. One bug
is that validate_sp_size uses task_cpu() to get the process stack, so
any stack trace from the booting CPU between early_init_devtree()
and sched_init() will have problems. Early on paca_ptrs[0] will be
poisoned, so that can cause machine checks dereferencing that memory
in real mode. Later, validating the current stack pointer against the
idle task of a different secondary will probably cause no stack trace
to be printed.
Fix this by setting thread_info->cpu right after smp_processor_id() is
set to the boot cpuid.
Until now a stack frame was set at all time due to the need
to keep tail call counter in the stack.
But since commit e99642531f8a ("powerpc/bpf/32: Fix Oops on tail call
tests") the tail call counter is passed via register r4. It is therefore
not necessary anymore to have a stack frame for that.
Just like PPC64, implement bpf_has_stack_frame() and only sets the frame
when needed.
The difference with PPC64 is that PPC32 doesn't have a redzone, so
the stack is required as soon as non volatile registers are used or
when tail call count is set up.
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
for this SoC. Public users only have ES2 onwards.
In addition to the ES1 specific removals, a check for it was added
preventing the machine to boot further. It may otherwise inherit wrong
clock settings from ES2 which could damage the hardware.
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Interrupt handlers called by soft-pending irq replay code can run
softirqs, softirq replay enables and disables local irqs, which allows
interrupts to come in including soft-masked interrupts, and it can
cause pending irqs to be replayed again. That makes the soft irq replay
state machine and possible races more complicated and fragile than it
needs to be.
Use irq_enter/irq_exit around irq replay to prevent softirqs running
while interrupts are being replayed. Softirqs will now be run at the
irq_exit() call after all the irq replaying is done. This prevents irqs
being replayed while irqs are being replayed, and should hopefully make
things simpler and easier to think about and debug.
A new PACA_IRQ_REPLAYING is added to prevent asynchronous interrupt
handlers hard-enabling EE while pending irqs are being replayed, because
that causes new pending irqs to arrive which is also a complexity. This
means pending irqs won't be profiled quite so well because perf irqs
can't be taken.
arch/mips/include/asm/mach-rc32434/pci.h:377:
cc1: error: result of ‘-117440512 << 16’ requires 44 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]
All bits in KORINA_STAT are already at the correct position, so there is
no addtional shift needed.
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
The watch_queue_set_size() allocation error paths return the ret value
set via the prior pipe_resize_ring() call, which will always be zero.
As a result, IOC_WATCH_QUEUE_SET_SIZE callers such as "keyctl watch"
fail to detect kernel wqueue->notes allocation failures and proceed to
KEYCTL_WATCH_KEY, with any notifications subsequently lost.
Fixes: 175295c8c9fa4 ("pipe: Add general notification queue support") Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A recent commit moved enabling of runtime PM from adreno_gpu_init() to
adreno_load_gpu() (called on first open()), which means that unbind()
may now be called with runtime PM disabled in case the device was never
opened in between.
Make sure to only forcibly suspend and disable runtime PM at unbind() in
case runtime PM has been enabled to prevent a disable count imbalance.
This specifically avoids leaving runtime PM disabled when the device
is later opened after a successful bind:
msm_dpu ae01000.display-controller: [drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -13
During kexec on ARM device, we notice that device_shutdown() only calls
pm_runtime_force_suspend() while shutting down the GPU. This means the GPU
kthread is still running and further, there maybe active submits.
This causes all kinds of issues during a kexec reboot:
Fix by calling adreno_system_suspend() in the device_shutdown() path.
[ Applied Rob Clark feedback on fixing adreno_unbind() similarly, also
tested as above. ]
Cc: Rob Clark <robdclark@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ricardo Ribalda <ribalda@chromium.org> Cc: Ross Zwisler <zwisler@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/517633/ Link: https://lore.kernel.org/r/20230109222547.1368644-1-joel@joelfernandes.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Stable-dep-of: 9faeae71331e ("drm/msm/adreno: fix runtime PM imbalance at unbind") Signed-off-by: Sasha Levin <sashal@kernel.org>
Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 5d459c76613e ("drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4") Signed-off-by: Sasha Levin <sashal@kernel.org>
As lockdep properly warns, we should not be locking i_rwsem while having
transactions started as the proper lock ordering used by all directory
handling operations is i_rwsem -> transaction start. Fix the lock
ordering by moving the locking of the directory earlier in
ext4_rename().
This patch fixes a return value check in kfd doorbell handling.
This function should return 0(error) only when the ida_simple_get
returns < 0(error), return > 0 is a success case.
Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: 17cd15143613 ("drm/amdkfd: Allocate doorbells only when needed") Acked-by: Christian Koenig <chriatian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We're currently using stop_machine() to update ftrace & kprobes, which
means that the thread that takes text_mutex during may not be the same
as the thread that eventually patches the code. This isn't actually a
race because the lock is still held (preventing any other concurrent
accesses) and there is only one thread running during stop_machine(),
but it does trigger a lockdep failure.
This patch just elides the lockdep check during stop_machine.
When CONFIG_FRAME_POINTER is unset, the stack unwinding function
walk_stackframe randomly reads the stack and then, when KASAN is enabled,
it can lead to the following backtrace:
Let's revert commit 5cccc5fbb265 ("erofs: fix kvcalloc() misuse with
__GFP_NOFAIL") since kvmalloc() already supports __GFP_NOFAIL in commit 318e576ba783 ("mm: allow !GFP_KERNEL allocations for kvmalloc"). So
the original fix was wrong.
Actually there was some issue as [1] discussed, so before that mm fix
is landed, the warn could still happen but applying this commit first
will cause less.
The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as
internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5
receives corrupted frames, unless port 6 (attached to GMAC0) has been
brought up by the driver. This is true regardless of whether port 5 is
used as a user port or as a CPU port (carrying DSA tags).
Offline debugging (blind for me) which began in the linked thread showed
experimentally that the configuration done by the driver for port 6
contains a step which is needed by port 5 as well - the write to
CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from
the comment "Set core clock into 500Mhz"). Prints put by Arınç show that
the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) |
RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the
MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi
BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both
values of the register, while on the MT7621 SoC it cannot.
The call path that triggers the register write is:
mt753x_phylink_mac_config() for port 6
-> mt753x_pad_setup()
-> mt7530_pad_clk_setup()
so this fully explains the behavior noticed by Arınç, that bringing port
6 up is necessary.
The simplest fix for the problem is to extract the register writes which
are needed for both port 5 and 6 into a common mt7530_pll_setup()
function, which is called at mt7530_setup() time, immediately after
switch reset. We can argue that this mirrors the code layout introduced
in mt7531_setup() by commit 39e6fca1cede ("net: mt7531: only do PLL once
after the reset"), in that the PLL setup has the exact same positioning,
and further work to consolidate the separate setup() functions is not
hindered.
Testing confirms that:
- the slight reordering of writes to MT7530_P6ECR and to
CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not
appear to cause problems for the operation of port 6 on MT7621 and on
MT7623 (where port 5 also always worked)
- packets sent through port 5 are not corrupted anymore, regardless of
whether port 6 is enabled by phylink or not (or even present in the
device tree)
My algorithm for determining the Fixes: tag is as follows. Testing shows
that some logic from mt7530_pad_clk_setup() is needed even for port 5.
Prior to commit 6ae43c9d6729 ("net: dsa: mt7530: Convert to PHYLINK
API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so
port 5 included. That commit replaced it with a temporary "Port 5 is not
supported!" comment, and the following commit 347b5aa9eb37 ("net: dsa:
mt7530: Add support for port 5") replaced that comment with a
configuration procedure in mt7530_setup_port5() which was insufficient
for port 5 to work. I'm laying the blame on the patch that claimed
support for port 5, although one would have also needed the change from
commit 1b0f892ff949 ("net: dsa: mt7530: setup core clock even in TRGMII
mode") for the write to be performed completely independently from port
6's configuration.
Thanks go to Arınç for describing the problem, for debugging and for
testing.
NDC caches contexts of frequently used queue's (Rx and Tx queues)
contexts. Due to a HW errata when NDC detects fault/poision while
accessing contexts it could go into an illegal state where a cache
line could get locked forever. To makesure all cache lines in NDC
are available for optimum performance upon fault/lockerror/posion
errors scan through all cache lines in NDC and clear the lock bit.
Fixes: d5ff4853f5b8 ("octeontx2-af: NPA AQ instruction enqueue support") Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before determining whether the msg has unsupported options, it has been
prematurely terminated by the wrong status check.
For the application, the general usages of MSG_FASTOPEN likes
fd = socket(...)
/* rather than connect */
sendto(fd, data, len, MSG_FASTOPEN)
Hence, We need to check the flag before state check, because the sock
state here is always SMC_INIT when applications tries MSG_FASTOPEN.
Once we found unsupported options, fallback it to TCP.
Fixes: ecf28acb843b ("net/smc: handle sockopts forcing fallback") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: Simon Horman <simon.horman@corigine.com>
v2 -> v1: Optimize code style Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When creating the TLV to send to the FW for configuring DSCP mode PFC,the
PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8
bit bitmask for enabled classes for PFC. This means that traffic classes
4-7 could not be enabled for PFC.
Remove the mask completely, as it is not necessary, as we are assigning 8
bits to an 8 bit field.
Fixes: c56146c4c21c ("ice: Add DSCP support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[1210423.486503] WARNING: CPU: 8 PID: 1524732 at fs/ext4/ext4_jbd2.c:75 ext4_journal_check_start+0x68/0xb0
Reported-by: <flole@flole.de> Suggested-by: Jan Kara <jack@suse.cz> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217123 Fixes: 459ceebfe186 ("nfsd: use vfs_iter_read/write") Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If disk_scan_partitions() is called with 'FMODE_EXCL',
blkdev_get_by_dev() will be called without 'FMODE_EXCL', however, follow
blkdev_put() is still called with 'FMODE_EXCL', which will cause
'bd_holders' counter to leak.
Fix the problem by using the right mode for blkdev_put().
Reported-by: syzbot+2bcc0d79e548c4f62a59@syzkaller.appspotmail.com Link: https://lore.kernel.org/lkml/f9649d501bc8c3444769418f6c26263555d9d3be.camel@linux.ibm.com/T/ Tested-by: Julian Ruess <julianr@linux.ibm.com> Fixes: 92ef14daac46 ("block: fix scan partition for exclusively open device again") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: 04776abc3efa ("platform/x86: mlx-platform: Add physical bus number auto detection") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vadim Pasternak <vadimp@mellanox.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: platform-driver-x86@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-7-rdunlap@infradead.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
For NVSW_SN2201, select REGMAP_I2C instead of depending on it.
Fixes: 627642557ce5 ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface") Fixes: 3971fc1bddc1 ("platform/mellanox: Introduce support for Mellanox register access driver") Fixes: d9bc053dd186 ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices") Fixes: d6a845788cec ("platform/mellanox: Add support for new SN2201 system") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Michael Shych <michaelsh@nvidia.com> Cc: Mark Gross <markgross@kernel.org> Cc: Vadim Pasternak <vadimp@nvidia.com> Cc: platform-driver-x86@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-6-rdunlap@infradead.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Customers using GKE 1.25 and 1.26 are facing conntrack issues
root caused to commit e62fa7b5eb99 ("netfilter: conntrack: make
max chain length random").
Even if we assume Uniform Hashing, a bucket often reachs 8 chained
items while the load factor of the hash table is smaller than 0.5
With a limit of 16, we reach load factors of 3.
With a limit of 32, we reach load factors of 11.
With a limit of 40, we reach load factors of 15.
With a limit of 50, we reach load factors of 24.
This patch changes MIN_CHAINLEN to 50, to minimize risks.
Ideally, we could in the future add a cushion based on expected
load factor (2 * nf_conntrack_max / nf_conntrack_buckets),
because some setups might expect unusual values.
Fixes: e62fa7b5eb99 ("netfilter: conntrack: make max chain length random") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the sd driver revalidates host-managed SMR disks, it calls
disk_set_zoned() which changes the zone_write_granularity attribute value
to the logical block size regardless of the device type. After that, the sd
driver overwrites the value in sd_zbc_read_zone() with the physical block
size, since ZBC/ZAC requires this for host-managed disks. Between the calls
to disk_set_zoned() and sd_zbc_read_zone(), there exists a window where the
attribute shows the logical block size as the zone_write_granularity value,
which is wrong for host-managed disks. The duration of the window is from
20ms to 200ms, depending on report zone command execution time.
To avoid the wrong zone_write_granularity value between disk_set_zoned()
and sd_zbc_read_zone(), modify the value not in sd_zbc_read_zone() but
just after disk_set_zoned() call.
Fixes: 172572cc4fbf ("block: introduce zone_write_granularity limit") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20230306063024.3376959-1-shinichiro.kawasaki@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF)
is reserved for deleted LDs. However, in some cases, firmware was assigning
LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the
wrong disk as deleted. This in turn caused the wrong disk device to be
taken offline by the SCSI midlayer.
To address this issue, limit the LD ID range from 255 to 240. This ensures
the deleted LD ID is properly identified and removed by the driver without
accidently deleting any valid LDs.
Fixes: 4d5cbca6306a ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update") Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Adrien reports that incorrect data is transmitted when a single
page straddles multiple records. We would transmit the same
data in all iterations of the loop.
Fix data corruption issue with SerDes connected PHYs operating at 1.25
Gbps speed where we could previously observe about 30% packet loss while
the bad packet counter was increasing.
As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531
switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using
rate-adaptation to 2500Base-X mode, this issue only got exposed now when
we started trying to use SFP modules operating with 1.25 Gbps with the
BananaPi R3 board.
The fix is to set bit 12 which disables the RX FIFO clear function when
setting up MAC MCR, MediaTek SDK did the same change stating:
"If without this patch, kernel might receive invalid packets that are
corrupted by GMAC."[1]
Currently link up can't be detected in forced mode if polling
isn't used. Only link up interrupt source we have is aneg
complete which isn't applicable in forced mode. Therefore we
have to use energy-on as link up indicator.
Fixes: 4ffe361110db ("net: phy: smsc: skip ENERGYON interrupt if disabled") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The last invocation of btf_datasec_resolve should invoke btf_var_resolve
by means of env_stack_push, instead it returns EINVAL. The reason is that
env_stack_push is never executed for the second VAR.
if (!env_type_is_resolve_sink(env, var_type) &&
!env_type_is_resolved(env, var_type_id)) {
env_stack_set_next_member(env, i + 1);
return env_stack_push(env, var_type, var_type_id);
}
env_type_is_resolve_sink() changes its behaviour based on resolve_mode.
For RESOLVE_PTR, we can simplify the if condition to the following:
Since we're dealing with a VAR the clause evaluates to false. This is
not sufficient to trigger the bug however. The log output and EINVAL
are only generated if btf_type_id_size() fails.
Most types are sized, so for example a VAR referring to an INT is not a
problem. The bug is only triggered if a VAR points at a modifier. Since
we skipped btf_var_resolve that modifier was also never resolved, which
means that btf_resolved_type_id returns 0 aka VOID for the modifier.
This in turn causes btf_type_id_size to return NULL, triggering EINVAL.
To summarise, the following conditions are necessary:
- VAR pointing at PTR, STRUCT, UNION or ARRAY
- Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or
TYPE_TAG
The fix is to reset resolve_mode to RESOLVE_TBD before attempting to
resolve a VAR from a DATASEC.
Fixes: 5cc8aa5eb834 ("bpf: kernel side support for BTF Var and DataSec") Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's always the case and e.g. xdp_convert_buff_to_frame() relies on
this.
IOW, the following:
for (u32 i = 0; i < 0xdead; i++) {
xdpf = xdp_convert_buff_to_frame(&xdp);
xdp_convert_frame_to_buff(xdpf, &xdp);
}
shouldn't ever modify @xdpf's contents or the pointer itself.
However, "live packet" code wrongly treats &xdp_frame as part of its
context placed *before* the data_hard_start. With such flow,
data_hard_start is sizeof(*xdpf) off to the right and no longer points
to the XDP frame.
Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several
places and praying that there are no more miscalcs left somewhere in the
code, unionize ::frm with ::data in a flex array, so that both starts
pointing to the actual data_hard_start and the XDP frame actually starts
being a part of it, i.e. a part of the headroom, not the context.
A nice side effect is that the maximum frame size for this mode gets
increased by 40 bytes, as xdp_buff::frame_sz includes everything from
data_hard_start (-> includes xdpf already) to the end of XDP/skb shared
info.
Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it
hardcoded for 64 bit && 4k pages, it can be made more flexible later on.
Minor: align `&head->data` with how `head->frm` is assigned for
consistency.
Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for
clarity.
(was found while testing XDP traffic generator on ice, which calls
xdp_convert_frame_to_buff() for each XDP frame)
Fixes: c23b8c0ec3f7 ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN") Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230215185440.4126672-1-aleksander.lobakin@intel.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
At btrfs_drop_extent_map_range() we are clearing the EXTENT_FLAG_LOGGING
bit on a 'flags' variable that was not initialized. This makes static
checkers complain about it, so initialize the 'flags' variable before
clearing the bit.
In practice this has no consequences, because EXTENT_FLAG_LOGGING should
not be set when btrfs_drop_extent_map_range() is called, as an fsync locks
the inode in exclusive mode, locks the inode's mmap semaphore in exclusive
mode too and it always flushes all delalloc.
Also add a comment about why we clear EXTENT_FLAG_LOGGING on a copy of the
flags of the split extent map.
Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/linux-btrfs/Y%2FyipSVozUDEZKow@kili/ Fixes: 6d5f4f2e44e4 ("btrfs: drop extent map range more efficiently") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):
initrd: 0ef0602c - 0f800000
Zone ranges:
DMA [mem 0x0000000008000000-0x000000f7ffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000008000000-0x000000000f7fffff]
Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
Unable to handle kernel access at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<00201d3c>] memcmp+0x28/0x56
As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init(). Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().
While at it, reduce #ifdef clutter by using IS_ENABLED() instead.
projects / kernel.git / log