Chao Yu [Fri, 20 May 2016 16:11:09 +0000 (00:11 +0800)]
f2fs: fix to update dirty page count correctly
Once we failed to merge inline data into inode page during flushing inline
inode, we will skip invoking inode_dec_dirty_pages, which makes dirty page
count incorrect, result in panic in ->evict_inode, Fix it.
Sheng Yong [Mon, 16 May 2016 04:38:50 +0000 (12:38 +0800)]
f2fs: add fault injection to sysfs
This patch introduces a new struct f2fs_fault_info and a global f2fs_fault
to save fault injection status. Fault injection entries are created in
/sys/fs/f2fs/fault_injection/ during initializing f2fs module.
Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Sat, 14 May 2016 11:03:53 +0000 (19:03 +0800)]
f2fs: fix incorrect error path handling in f2fs_move_rehashed_dirents
Fix two bugs in error path of f2fs_move_rehashed_dirents:
- release dir's inode page if fail to call kmalloc
- recover i_current_depth if fail to converting
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Sat, 14 May 2016 11:03:52 +0000 (19:03 +0800)]
f2fs: fix i_current_depth during inline dentry conversion
With below steps, we will see that dentry page becoming unaccessable later.
This is because we forget updating i_current_depth in inode during inline
dentry conversion, after that, once we failed at somewhere, it will leave
i_current_depth as 0 in non-inline directory. Then, during ->lookup, the
current_depth value makes all dentry pages in first level invisible. Fix
it.
1) mount f2fs with inline_dentry option
2) mkdir dir
3) touch 180 files named [0-179] in dir
4) touch 180 in dir (fail after inline dir conversion)
5) ll dir
ls: cannot access /mnt/f2fs/dir/0: No such file or directory
ls: cannot access /mnt/f2fs/dir/1: No such file or directory
ls: cannot access /mnt/f2fs/dir/2: No such file or directory
ls: cannot access /mnt/f2fs/dir/3: No such file or directory
ls: cannot access /mnt/f2fs/dir/4: No such file or directory
With following excuting serials, we will set inline_node in inode page
after inode was unlinked, result in a deadloop described as below:
1. open file
2. write file
3. unlink file
4. write file
5. close file
Chao Yu [Mon, 9 May 2016 11:56:30 +0000 (19:56 +0800)]
f2fs: support in batch multi blocks preallocation
This patch introduces reserve_new_blocks to make preallocation of multi
blocks as in batch operation, so it can avoid lots of redundant
operation, result in better performance.
In virtual machine, with rotational device:
time fallocate -l 32G /mnt/f2fs/file
Before:
real 0m4.584s
user 0m0.000s
sys 0m4.580s
After:
real 0m0.292s
user 0m0.000s
sys 0m0.272s
In x86, with SSD:
time fallocate -l 500G $MNT/testfile
Before : 24.758 s
After : 1.604 s
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix bugs and add performance numbers measured in x86.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Mon, 9 May 2016 11:56:33 +0000 (19:56 +0800)]
f2fs: make atomic/volatile operation exclusive
atomic/volatile ioctl interfaces are exposed to user like other file
operation interface, it needs to make them getting exclusion against
to each other to avoid potential conflict among these operations
in concurrent scenario.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Mon, 9 May 2016 11:56:32 +0000 (19:56 +0800)]
f2fs: use mnt_{want,drop}_write_file in ioctl
In interfaces of ioctl, mnt_{want,drop}_write_file should be used for:
- get exclusion against file system freezing which may used by lvm
snapshot.
- do telling filesystem that a write is about to be performed on it, and
make sure that the writes are permitted.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 7 May 2016 15:52:57 +0000 (08:52 -0700)]
f2fs: do not preallocate block unaligned to 4KB
Previously f2fs_preallocate_blocks() tries to allocate unaligned blocks.
In f2fs_write_begin(), however, prepare_write_begin() does not skip its
allocation due to (len != 4KB).
So, it needs locking node page twice unexpectedly.
Chao Yu [Sat, 7 May 2016 08:15:05 +0000 (16:15 +0800)]
f2fs: fix inode cache leak
When testing f2fs with inline_dentry option, generic/342 reports:
VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day...
After rmmod f2fs module, kenrel shows following dmesg:
=============================================================================
BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
The reason is: in recovery flow, we use delayed iput mechanism for directory
which has recovered dentry block. It means the reference of inode will be
held until last dirty dentry page being writebacked.
But when we mount f2fs with inline_dentry option, during recovery, dirent
may only be recovered into dir inode page rather than dentry page, so there
are no chance for us to release inode reference in ->writepage when
writebacking last dentry page.
We can call paired iget/iput explicityly for inline_dentry case, but for
non-inline_dentry case, iput will call writeback_single_inode to write all
data pages synchronously, but during recovery, ->writepages of f2fs skips
writing all pages, result in losing dirent.
This patch fixes this issue by obsoleting old mechanism, and introduce a
new dir_list to hold all directory inodes which has recovered datas until
finishing recovery.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 5 May 2016 05:05:01 +0000 (22:05 -0700)]
fscrypto/f2fs: allow fs-specific key prefix for fs encryption
This patch allows fscrypto to handle a second key prefix given by filesystem.
The main reason is to provide backward compatibility, since previously f2fs
used "f2fs:" as a crypto prefix instead of "fscrypt:".
Later, ext4 should also provide key_prefix() to give "ext4:".
One concern decribed by Ted would be kinda double check overhead of prefixes.
In x86, for example, validate_user_key consumes 8 ms after boot-up, which turns
out derive_key_aes() consumed most of the time to load specific crypto module.
After such the cold miss, it shows almost zero latencies, which treats as a
negligible overhead.
Note that request_key() detects wrong prefix in prior to derive_key_aes() even.
The reason is truncate_blocks tries to truncate all node and data blocks
start from specified block offset with value of (max filesize / block
size), but actually, our valid max block offset is (max filesize / block
size) - 1, so f2fs detects such invalid block offset with BUG_ON in
truncation path.
This patch lets f2fs skip truncating data which is exceeding max
filesize.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Thu, 5 May 2016 11:13:02 +0000 (19:13 +0800)]
f2fs: fix incorrect mapping in ->bmap
Currently, generic_block_bmap is used in f2fs_bmap, its semantics is when
the mapping is been found, return position of target physical block,
otherwise return zero.
But, previously, when there is no mapping info for specified logical block,
f2fs_bmap will map target physical block to a uninitialized variable, which
should be wrong. Fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Wed, 4 May 2016 15:19:48 +0000 (23:19 +0800)]
f2fs: shrink size of struct seg_entry
Restructure struct seg_entry to eliminate holes in it, after that,
in 32-bits machine, it reduces size from 32 bytes to 24 bytes; in
64-bits machine, it reduces size from 56 bytes to 40 bytes.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Mon, 2 May 2016 19:34:48 +0000 (12:34 -0700)]
f2fs: revisit error handling flows
This patch fixes a couple of bugs regarding to orphan inodes when handling
errors.
This tries to
- call alloc_nid_done with add_orphan_inode in handle_failed_inode
- let truncate blocks in f2fs_evict_inode
- not make a bad inode due to i_mode change
Yunlong Song [Wed, 27 Apr 2016 12:32:37 +0000 (20:32 +0800)]
f2fs: fix to return 0 if err == -ENOENT in f2fs_readdir
Commit f9df6df9bbfc0a85af5823a48f465a5050feb6fb ("f2fs: fix to report
error in f2fs_readdir") causes f2fs_readdir to return -ENOENT when
get_lock_data_page returns -ENOENT. However, the original logic is to
continue when get_lock_data_page returns -ENOENT, but it forgets to
reset err to 0.
This will cause getdents64 incorretly return -ENOENT when lastdirent is
NULL in getdents64. This will lead to a wrong return value for syscall
caller.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs: move node pages only in victim section during GC
For foreground GC, we cache node blocks in victim section and set them
dirty, then we call sync_node_pages to flush these node pages, but
meanwhile, those node pages which does not locate in victim section
will be flushed together, so more bandwidth and continuous free space
would be occupied.
So for this condition, it's better to leave those unrelated node page
in cache for further write hit, and let CP or VM to flush them afterward.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The filename length in dirent of may become zero-sized after random junk
data injection, once encounter such dirent, find_target_dentry or
f2fs_add_inline_entries will run into an infinite loop. So let f2fs being
aware of that to avoid deadloop.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 15 Apr 2016 16:43:17 +0000 (09:43 -0700)]
f2fs: set fsync mark only for the last dnode
In order to give atomic writes, we should consider power failure during
sync_node_pages in fsync.
So, this patch marks fsync flag only in the last dnode block.
Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Mon, 11 Apr 2016 20:15:10 +0000 (13:15 -0700)]
f2fs: unset atomic/volatile flag in f2fs_release_file
The atomic/volatile operation should be done in pair of start and commit
ioctl.
For example, if a killed process remains open-ended atomic operation, we should
drop its flag as well as its atomic data. Otherwise, if sqlite initiates another
operation which doesn't require atomic writes, it will lose every data, since
f2fs still treats with them as atomic writes; nobody will trigger its commit.
Reported-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Mon, 11 Apr 2016 18:51:51 +0000 (11:51 -0700)]
f2fs: fix dropping inmemory pages in a wrong time
When one reader closes its file while the other writer is doing atomic writes,
f2fs_release_file drops atomic data resulting in an empty commit.
This patch fixes this wrong commit problem by checking openess of the file.
Process0 Process1
open file
start atomic write
write data
read data
close file
f2fs_release_file()
clear atomic data
commit atomic write
Reported-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Tue, 29 Mar 2016 23:13:45 +0000 (16:13 -0700)]
f2fs: add BUG_ON to avoid unnecessary flow
This patch adds BUG_ON instead of retrying loop.
In the case of node pages, we already got this inode page, but unlocked it.
By the fact that we don't truncate any node pages in operations, the page's
mapping should be unchangeable.
Chao Yu [Mon, 22 Feb 2016 10:29:18 +0000 (18:29 +0800)]
f2fs: fix to convert inline directory correctly
With below serials, we will lose parts of dirents:
1) mount f2fs with inline_dentry option
2) echo 1 > /sys/fs/f2fs/sdX/dir_level
3) mkdir dir
4) touch 180 files named [1-180] in dir
5) touch 181 in dir
6) echo 3 > /proc/sys/vm/drop_caches
7) ll dir
ls: cannot access 2: No such file or directory
ls: cannot access 4: No such file or directory
ls: cannot access 5: No such file or directory
ls: cannot access 6: No such file or directory
ls: cannot access 8: No such file or directory
ls: cannot access 9: No such file or directory
...
total 360
drwxr-xr-x 2 root root 4096 Feb 19 15:12 ./
drwxr-xr-x 3 root root 4096 Feb 19 15:11 ../
-rw-r--r-- 1 root root 0 Feb 19 15:12 1
-rw-r--r-- 1 root root 0 Feb 19 15:12 10
-rw-r--r-- 1 root root 0 Feb 19 15:12 100
-????????? ? ? ? ? ? 101
-????????? ? ? ? ? ? 102
-????????? ? ? ? ? ? 103
...
The reason is: when doing the inline dir conversion, we didn't consider
that directory has hierarchical hash structure which can be configured
through sysfs interface 'dir_level'.
By default, dir_level of directory inode is 0, it means we have one bucket
in hash table located in first level, all dirents will be hashed in this
bucket, so it has no problem for us to do the duplication simply between
inline dentry page and converted normal dentry page.
However, if we configured dir_level with the value N (greater than 0), it
will expand the bucket number of first level hash table by 2^N - 1, it
hashs dirents into different buckets according their hash value, if we
still move all dirents to first bucket, it makes incorrent locating for
inline dirents, the result is, although we can iterate all dirents through
->readdir, we can't stat some of them in ->lookup which based on hash
table searching.
This patch fixes this issue by rehashing dirents into correct position
when converting inline directory.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 24 Mar 2016 00:05:27 +0000 (17:05 -0700)]
f2fs: recover superblock at RW remounts
This patch adds a sbi flag, SBI_NEED_SB_WRITE, which indicates it needs to
recover superblock when (re)mounting as RW. This is set only when f2fs is
mounted as RO.
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a binutils fix, an lguest fix, an mcelog fix and a missing
documentation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Avoid using object after free in genpool
lguest, x86/entry/32: Fix handling of guest syscalls using interrupt gates
x86/build: Build compressed x86 kernels as PIE
x86/mm/pkeys: Add missing Documentation
Merge branch 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull mm gup cleanup from Ingo Molnar:
"This removes the ugly get-user-pages API hack, now that all upstream
code has been migrated to it"
("ugly" is putting it mildly. But it worked.. - Linus)
* 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm/gup: Remove the macro overload API migration helpers from the get_user*() APIs
Merge tag 'dm-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- fix a 4.6-rc1 bio-based DM 'struct dm_target_io' leak in an error
path
- stable@ fix for DM cache metadata's READ_LOCK macros that were
incorrectly returning error if the block manager was in read-only
mode; also cleanup multi-statement macros to use do {} while(0)
* tag 'dm-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
dm: fix dm_target_io leak if clone_bio() returns an error
Merge tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We've had a very calm development cycle, so far. Here are the few
fixes for HD-audio and USB-audio, all of which are small and easy"
* tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix inconsistent monitor_present state until repoll
ALSA: hda - Fix regression of monitor_present flag in eld proc file
ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s
ALSA: sscape: Use correct format identifier for size_t
ALSA: usb-audio: Add a quirk for Plantronics BT300
ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320
ALSA: hda - Bind with i915 only when Intel graphics is present
Merge branch 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox fixes from Jussi Brar:
"Misc fixes:
mailbox-test driver:
- prevent memory leak and another cosmetic change
mailbox:
- change the returned error code
Xgene driver:
- return -ENOMEM instead of PTR_ERR for failed devm_kzalloc"
* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Stop using ENOSYS for anything other than unimplemented syscalls
mailbox: mailbox-test: Prevent memory leak
mailbox: mailbox-test: Use more consistent format for calling copy_from_user()
mailbox: xgene-slimpro: Fix wrong test for devm_kzalloc
Merge tag 'for-linus-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs/fscrypto fixes from Jaegeuk Kim:
"In addition to f2fs/fscrypto fixes, I've added one patch which
prevents RCU mode lookup in d_revalidate, as Al mentioned.
These patches fix f2fs and fscrypto based on -rc3 bug fixes in ext4
crypto, which have not yet been fully propagated as follows.
- use of dget_parent and file_dentry to avoid crashes
- disallow RCU-mode lookup in d_invalidate
- disallow -ENOMEM in the core data encryption path"
* tag 'for-linus-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
ext4/fscrypto: avoid RCU lookup in d_revalidate
fscrypto: don't let data integrity writebacks fail with ENOMEM
f2fs: use dget_parent and file_dentry in f2fs_file_open
fscrypto: use dget_parent() in fscrypt_d_revalidate()
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes an NFS regression caused by the skcipher/hash conversion in
sunrpc. It also fixes a build problem in certain configurations with
bcm63xx"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: bcm63xx - fix device tree compilation
sunrpc: Fix skcipher/shash conversion
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull keys bugfixes from James Morris:
"Two bugfixes for Keys related code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ASN.1: fix open failure check on headername
assoc_array: don't call compare_object() on a node
Mike Snitzer [Tue, 12 Apr 2016 16:14:46 +0000 (12:14 -0400)]
dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
The READ_LOCK macro was incorrectly returning -EINVAL if
dm_bm_is_read_only() was true -- it will always be true once the cache
metadata transitions to read-only by dm_cache_metadata_set_read_only().
Wrap READ_LOCK and WRITE_LOCK multi-statement macros in do {} while(0).
Also, all accesses of the 'cmd' argument passed to these related macros
are now encapsulated in parenthesis.
A follow-up patch can be developed to eliminate the use of macros in
favor of pure C code. Avoiding that now given that this needs to apply
to stable@.
Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Fixes: 7e42c004081 ("dm cache: make sure every metadata function checks fail_io") Cc: stable@vger.kernel.org
/proc/iomem: only expose physical resource addresses to privileged users
In commit 17db9a4b4a596 ("x86: remove the kernel code/data/bss resources
from /proc/iomem") I was hoping to remove the phyiscal kernel address
data from /proc/iomem entirely, but that had to be reverted because some
system programs actually use it.
This limits all the detailed resource information to properly
credentialed users instead.
pci-sysfs: use proper file capability helper function
The PCI config access checked the file capabilities correctly, but used
the itnernal security capability check rather than the helper function
that is actually meant for that.
The security_capable() has unusual return values and is not meant to be
used elsewhere (the only other use is in the capability checking
functions that we actually intend people to use, and this odd PCI usage
really stood out when looking around the capability code.
Make file credentials available to the seqfile interfaces
A lot of seqfile users seem to be using things like %pK that uses the
credentials of the current process, but that is actually completely
wrong for filesystem interfaces.
The unix semantics for permission checking files is to check permissions
at _open_ time, not at read or write time, and that is not just a small
detail: passing off stdin/stdout/stderr to a suid application and making
the actual IO happen in privileged context is a classic exploit
technique.
So if we want to be able to look at permissions at read time, we need to
use the file open credentials, not the current ones. Normal file
accesses can just use "f_cred" (or any of the helper functions that do
that, like file_ns_capable()), but the seqfile interfaces do not have
any such options.
It turns out that seq_file _does_ save away the user_ns information of
the file, though. Since user_ns is just part of the full credential
information, replace that special case with saving off the cred pointer
instead, and suddenly seq_file has all the permission information it
needs.
Sadly, my hope that nobody would actually use the special kernel entries
in /proc/iomem were dashed by kexec. Which reads /proc/iomem explicitly
to find the kernel base address. Nasty.
Anyway, that means we can't do the sane and simple thing and just remove
the entries, and we'll instead have to mask them out based on permissions.
Reported-by: Zhengyu Zhang <zhezhang@redhat.com> Reported-by: Dave Young <dyoung@redhat.com> Reported-by: Freeman Zhang <freeman.zhang1992@gmail.com> Reported-by: Emrah Demir <ed@abdsec.com> Reported-by: Baoquan He <bhe@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The RB-tree regmap cache needs to allocate new space on first writes.
However, allocations in an atomic context (e.g. when a spinlock is held)
are not allowed. The function regmap_write calls map->lock, which
acquires a spinlock in the fast_io case. Since the pwm-fsl-ftm driver
uses MMIO, the regmap bus of type regmap_mmio is being used which has
fast_io set to true.
The MMIO space of the pwm-fsl-ftm driver is reasonable condense, hence
using the much faster flat regmap cache is anyway the better choice.
Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Merge tag 'sh-fixes-4.6-rc1' of git://git.libc.org/linux-sh
Pull arch/sh fixes from Rich Felker:
"Fixes for two arch/sh build regressions that appeared in 4.6-rc1, one
introduced by me, and one caused by changes elsewhere"
* tag 'sh-fixes-4.6-rc1' of git://git.libc.org/linux-sh:
sh: fix function signature of cpu_coregroup_mask to match pointer type
sh: fix smp-shx3 build regression from removal of arch localtimer
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu/coldfire fix from Greg Ungerer:
"Only a single change that removes a local arch specific gpio bus sysfs
device that now clashes with the generic gpio bus sysfs device
interface"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k/gpio: remove arch specific sysfs bus device
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A batch of fixes for -rc4, for various platforms.
Nothing really substantial and worth pointing out in particular; small
fixes for various bugs, see shortlog for details"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: sa1100: remove references to the defunct handhelds.org
bus: uniphier-system-bus: fix condition of overlap check
ARM: uniphier: drop weird sizeof()
ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
ARM: OMAP: Correct interrupt type for ARM TWD
ARM: DRA722: Add ID detect for Silicon Rev 2.0
ARM: dts: am43xx: fix edma memcpy channel allocation
ARM: dts: AM43x-epos: Fix clk parent for synctimer
ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
documentation: Fix pinctrl documentation for Meson8 / Meson8b
ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b
ARM: mvebu: Correct unit address for linksys
bus: mvebu-mbus: use %pa to print phys_addr_t
arm64: dts: vulcan: Update PCI ranges
ARM: u8500_defconfig: turn on the Synaptics RMI4 driver
ARM: pxa: fix the number of DMA requestor lines
ARM: OMAP2+: hwmod: Fix updating of sysconfig register
ARM: OMAP2+: Use srst_udelay for USB on dm814x
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM fixes:
- Wrong indentation in the PMU code from the merge window
- A long-time bug occuring with running ntpd on the host, candidate
for stable
- Properly handle (and warn about) the unsupported configuration of
running on systems with less than 40 bits of PA space
- More fixes to the PM and hotplug notifier stuff from the merge
window
x86:
- leak of guest xcr0 (typically shows up as SIGILL)
- new maintainer (who is sending the pull request too)
- fix for merge window regression
- fix for guest CPUID"
Paolo Bonzini points out:
"For the record, this tag is signed by me because I prepared the pull
request. Further pull requests for 4.6 will be signed and sent out by
Radim directly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: mask CPUID(0xD,0x1).EAX against host value
kvm: x86: do not leak guest xcr0 into host interrupt handlers
KVM: MMU: fix permission_fault()
KVM: new maintainer on the block
arm64: KVM: unregister notifiers in hyp mode teardown path
arm64: KVM: Warn when PARange is less than 40 bits
KVM: arm/arm64: Handle forward time correction gracefully
arm64: KVM: Add braces to multi-line if statement in virtual PMU code
Tony Luck [Wed, 6 Apr 2016 08:05:16 +0000 (10:05 +0200)]
x86/mce: Avoid using object after free in genpool
When we loop over all queued machine check error records to pass them
to the registered notifiers we use llist_for_each_entry(). But the loop
calls gen_pool_free() for the entry in the body of the loop - and then
the iterator looks at node->next after the free.
Use llist_for_each_entry_safe() instead.
Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/0205920@agluck-desk.sc.intel.com Link: http://lkml.kernel.org/r/1459929916-12852-4-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
ALSA: hda - Fix inconsistent monitor_present state until repoll
While the previous commit fixed the missing monitor_present flag
update, it may be still in an inconsistent state while the driver
repolls: the flag itself is updated, but the eld_valid flag and the
contents don't follow until the repoll finishes (and may be repeated
for a few times).
The basic problem is that pin_eld->monitor_present is updated in the
caller side. This should have been updated only in update_eld(). So,
the proper fix is to avoid accessing pin_eld but only spec->temp_eld.
ALSA: hda - Fix regression of monitor_present flag in eld proc file
The commit [800d62957ed8: ALSA: hda - Fix forgotten HDMI
monitor_present update] covered the missing update of monitor_present
flag, but this caused a regression for devices without the i915 eld
notifier. Since the old code supposed that pin_eld->monitor_present
was updated by the caller side, the hdmi_present_sense_via_verbs()
doesn't update the temporary eld->monitor_present but only
pin_eld->monitor_present, which is now overridden in update_eld().
The fix is to update pin_eld->monitor_present as well before calling
update_eld().
Note that this may still leave monitor_present flag in an inconsistent
state when the driver repolls, but this is at least the old behavior.
More proper fix will follow in the later patch.
Jaegeuk Kim [Tue, 12 Apr 2016 23:05:36 +0000 (16:05 -0700)]
ext4/fscrypto: avoid RCU lookup in d_revalidate
As Al pointed, d_revalidate should return RCU lookup before using d_inode.
This was originally introduced by:
commit d771f8af60d4 ("fs: rcu-walk aware d_revalidate method").
Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: stable <stable@vger.kernel.org>
Olof Johansson [Tue, 12 Apr 2016 19:35:07 +0000 (12:35 -0700)]
Merge tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 4.6 (part 1)
- fix USB adress register for Linksys Armada 388 based boards
- fix build warning in mvebu-mbus
* tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Correct unit address for linksys
bus: mvebu-mbus: use %pa to print phys_addr_t
projects / kernel.git / log