drm/doc/rfc: drop the i915_gem_lmem.h header

The proper headers have now landed in include/uapi/drm/i915_drm.h, so we
can drop i915_gem_lmem.h and instead just reference the real headers for
pulling in the kernel doc.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511170356.430284-1-matthew.auld@intel.com

drm/i915/stolen: shuffle around init_memory_region

We generally want to first call i915_gem_object_init_memory_region()
before calling into get_pages(), since this sets up various bits of
state which might be needed there. Currently for stolen this doesn't
matter much, but it might in the future, and at the very least this
makes things consistent with the other backends.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507095948.384230-1-matthew.auld@intel.com

drm/i915/gt: Do release kernel context if breadcrumb measure fails

Commit fb5970da1b42 ("drm/i915/gt: Use the kernel_context to measure the
breadcrumb size") reordered some operations inside engine_init_common()
and added an error unwind path to that function.  In that path, a
reference to a kernel context candidate supposed to be released on error
was put, but the context, pinned when created, was not unpinned first.
Fix it by replacing intel_context_put() with destroy_pinned_context()
introduced later by commit b436a5f8b6c8 ("drm/i915/gt: Track all timelines
created using the HWSP").

Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507144251.376538-1-janusz.krzysztofik@linux.intel.com

drm/i915: Drop duplicate WaDisable4x2SubspanOptimization:hsw

Same workaround was listed two times - once under the Gen7 block and once
under the Haswell section.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507084926.2423003-1-tvrtko.ursulin@linux.intel.com

drm/i915: drop the __i915_active_call pointer packing

We use some of the lower bits of the retire function pointer for
potential flags, which is quite thorny, since the caller needs to
remember to give the function the correct alignment with
__i915_active_call, otherwise we might incorrectly unpack the pointer
and jump to some garbage address later. Instead of all this let's just
pass the flags along as a separate parameter.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
References: ca419f407b43 ("drm/i915: Fix crash in auto_retire")
References: d8e44e4dd221 ("drm/i915/overlay: Fix active retire callback alignment")
References: fd5f262db118 ("drm/i915/selftests: Fix active retire callback alignment")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504164136.96456-1-matthew.auld@intel.com

drm/i915/gem: hide new uAPI behind CONFIG_BROKEN

Treat it the same as the fake local-memory stuff, where it is disabled
for normal kernels, in case some random UMD is tempted to use this. Once
we have all the other bits and pieces in place, like the TTM conversion,
we can turn this on for real.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-9-matthew.auld@intel.com

drm/i915/gem: clear userspace buffers for LMEM

All userspace objects must be cleared when allocating the backing store,
before they are potentially visible to userspace.  For now use simple
CPU based clearing to do this for device local-memory objects, note that
in the near future this will instead use the blitter engine.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-8-matthew.auld@intel.com

drm/i915/lmem: support optional CPU clearing for special internal use

For some internal device local-memory objects it would be useful to have
an option to CPU clear the pages upon gathering the backing store. Note
that this might be before the blitter is useable, which is the case for
some internal GuC objects.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-7-matthew.auld@intel.com

drm/i915/uapi: implement object placement extension

Add new extension to support setting an immutable-priority-list of
potential placements, at creation time.

If we use the normal gem_create or gem_create_ext without the
extensions/placements then we still get the old behaviour with only
placing the object in system memory.

v2(Daniel & Jason):
    - Add a bunch of kernel-doc
    - Simplify design for placements extension

Testcase: igt/gem_create/create-ext-placement-sanity-check
Testcase: igt/gem_create/create-ext-placement-each
Testcase: igt/gem_create/create-ext-placement-all
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-6-matthew.auld@intel.com

drm/i915/uapi: introduce drm_i915_gem_create_ext

Same old gem_create but with now with extensions support. This is needed
to support various upcoming usecases.

v2:(Chris)
    - Use separate ioctl number for gem_create_ext, instead of hijacking
      the existing gem_create ioctl, otherwise we run into the issue
      with being unable to detect if the kernel supports the new extension
      behaviour.
    - We now have gem_create_ext.flags, which should be zeroed.
    - I915_GEM_CREATE_EXT_SETPARAM value is now zero, since this is the
      index into our array of extensions.
    - Setup a "vanilla" object which we can directly apply our extensions
      to.
v3:(Daniel & Jason)
    - drop I915_GEM_CREATE_EXT_SETPARAM. Instead just have each extension
      do one thing only, instead of generic setparam which can cover
      various use cases.
    - add some kernel-doc.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-5-matthew.auld@intel.com

drm/i915: rework gem_create flow for upcoming extensions

With the upcoming gem_create_ext we want to be able create a "vanilla"
object upfront and pass that directly to the extensions, before actually
initialising the object. Functionally this should be the same expect we
now feed the object into the lower-level region specific init_object.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-4-matthew.auld@intel.com

drm/i915/query: Expose memory regions through the query uAPI

Returns the available memory region areas supported by the HW.

v2(Daniel & Jason):
    - Add some kernel-doc, including example usage.
    - Drop all the extra rsvd
v3(Jason & Tvrtko)
    - add back rsvd

Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-3-matthew.auld@intel.com

drm/i915: mark stolen as private

In the next patch we want to expose the supported regions to userspace,
which can then be fed into the gem_create_ext placement extensions. For
now treat stolen memory as private from userspace pov.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-2-matthew.auld@intel.com

drm/doc/rfc: i915 DG1 uAPI

Add an entry for the new uAPI needed for DG1. Also add the overall
upstream plan, including some notes for the TTM conversion.

v2(Daniel):
  - include the overall upstreaming plan
  - add a note for mmap, there are differences here for TTM vs i915
  - bunch of other suggestions from Daniel
v3:
 (Daniel)
  - add a note for set/get caching stuff
  - add some more docs for existing query and extensions stuff
  - add an actual code example for regions query
  - bunch of other stuff
 (Jason)
  - uAPI change(!):
- try a simpler design with the placements extension
- rather than have a generic setparam which can cover multiple
  use cases, have each extension be responsible for one thing
  only
v4:
 (Daniel)
  - add some more notes for ttm conversion
  - bunch of other stuff
 (Jason)
  - uAPI change(!):
- drop all the extra rsvd members for the region_query and
  region_info, just keep the bare minimum needed for padding
v5:
(Jason)
  - for the upstream plan, add a requirement that we send the uAPI bits
    again for final sign off before turning it on for real
  - document how we intend to extend the rsvd bits for the region query
(Kenneth)
  - improve the comment for the smem+lmem mmap mode and caching

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429103056.407067-1-matthew.auld@intel.com

drm/i915: Use might_alloc()

This maybe uses lockdep through the fs_reclaim annotations.

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429021327.57944-1-bernard@vivo.com

drm/i915: Remove erroneous i915_is_ggtt check for I915_GEM_OBJECT_UNBIND_VM_TRYLOCK

We changed the locking hierarchy for both ppgtt and ggtt, so both locks
should be trylocked inside i915_gem_object_unbind().

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: bc6f80cce9ae ("drm/i915: Use trylock in shrinker for ggtt on bsw vt-d and bxt, v2.")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429120158.1105318-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #irc

drm/i915/selftests: Fix active retire callback alignment

__i915_active_call annotation is required on the retire callback to ensure
correct function alignment.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429083530.849546-2-tvrtko.ursulin@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/overlay: Fix active retire callback alignment

__i915_active_call annotation is required on the retire callback to ensure
correct function alignment.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a21ce8ad12d2 ("drm/i915/overlay: Switch to using i915_active tracking")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429083530.849546-1-tvrtko.ursulin@linux.intel.com

drm/i915: Use trylock in shrinker for ggtt on bsw vt-d and bxt, v2.

The stop_machine() lock may allocate memory, but is called inside
vm->mutex, which is taken in the shrinker. This will cause a lockdep
splat, as can be seen below:

<4>[  462.585762] ======================================================
<4>[  462.585768] WARNING: possible circular locking dependency detected
<4>[  462.585773] 5.12.0-rc5-CI-Trybot_7644+ #1 Tainted: G     U
<4>[  462.585779] ------------------------------------------------------
<4>[  462.585783] i915_selftest/5540 is trying to acquire lock:
<4>[  462.585788] ffffffff826440b0 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x12/0x30
<4>[  462.585814]
                  but task is already holding lock:
<4>[  462.585818] ffff888125369c70 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x38e/0xb40 [i915]
<4>[  462.586301]
                  which lock already depends on the new lock.

<4>[  462.586305]
                  the existing dependency chain (in reverse order) is:
<4>[  462.586309]
                  -> #2 (&vm->mutex/1){+.+.}-{3:3}:
<4>[  462.586323]        i915_gem_shrinker_taints_mutex+0x2d/0x50 [i915]
<4>[  462.586719]        i915_address_space_init+0x12d/0x130 [i915]
<4>[  462.587092]        ppgtt_init+0x4e/0x80 [i915]
<4>[  462.587467]        gen8_ppgtt_create+0x3e/0x5c0 [i915]
<4>[  462.587828]        i915_ppgtt_create+0x28/0xf0 [i915]
<4>[  462.588203]        intel_gt_init+0x123/0x370 [i915]
<4>[  462.588572]        i915_gem_init+0x129/0x1f0 [i915]
<4>[  462.588971]        i915_driver_probe+0x753/0xd80 [i915]
<4>[  462.589320]        i915_pci_probe+0x43/0x1d0 [i915]
<4>[  462.589671]        pci_device_probe+0x9e/0x110
<4>[  462.589680]        really_probe+0xea/0x410
<4>[  462.589690]        driver_probe_device+0xd9/0x140
<4>[  462.589697]        device_driver_attach+0x4a/0x50
<4>[  462.589704]        __driver_attach+0x83/0x140
<4>[  462.589711]        bus_for_each_dev+0x75/0xc0
<4>[  462.589718]        bus_add_driver+0x14b/0x1f0
<4>[  462.589724]        driver_register+0x66/0xb0
<4>[  462.589731]        i915_init+0x70/0x87 [i915]
<4>[  462.590053]        do_one_initcall+0x56/0x2e0
<4>[  462.590061]        do_init_module+0x55/0x200
<4>[  462.590068]        load_module+0x2703/0x2990
<4>[  462.590074]        __do_sys_finit_module+0xad/0x110
<4>[  462.590080]        do_syscall_64+0x33/0x80
<4>[  462.590089]        entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[  462.590096]
                  -> #1 (fs_reclaim){+.+.}-{0:0}:
<4>[  462.590109]        fs_reclaim_acquire+0x9f/0xd0
<4>[  462.590118]        kmem_cache_alloc_trace+0x3d/0x430
<4>[  462.590126]        intel_cpuc_prepare+0x3b/0x1b0
<4>[  462.590133]        cpuhp_invoke_callback+0x9e/0x890
<4>[  462.590141]        _cpu_up+0xa4/0x130
<4>[  462.590147]        cpu_up+0x82/0x90
<4>[  462.590153]        bringup_nonboot_cpus+0x4a/0x60
<4>[  462.590159]        smp_init+0x21/0x5c
<4>[  462.590167]        kernel_init_freeable+0x8a/0x1b7
<4>[  462.590175]        kernel_init+0x5/0xff
<4>[  462.590181]        ret_from_fork+0x22/0x30
<4>[  462.590187]
                  -> #0 (cpu_hotplug_lock){++++}-{0:0}:
<4>[  462.590199]        __lock_acquire+0x1520/0x2590
<4>[  462.590207]        lock_acquire+0xd1/0x3d0
<4>[  462.590213]        cpus_read_lock+0x39/0xc0
<4>[  462.590219]        stop_machine+0x12/0x30
<4>[  462.590226]        bxt_vtd_ggtt_insert_entries__BKL+0x36/0x50 [i915]
<4>[  462.590601]        ggtt_bind_vma+0x5d/0x80 [i915]
<4>[  462.590970]        i915_vma_bind+0xdc/0x1c0 [i915]
<4>[  462.591374]        i915_vma_pin_ww+0x435/0xb40 [i915]
<4>[  462.591779]        make_obj_busy+0xcb/0x330 [i915]
<4>[  462.592170]        igt_mmap_offset_exhaustion+0x45f/0x4c0 [i915]
<4>[  462.592562]        __i915_subtests.cold.7+0x42/0x92 [i915]
<4>[  462.592995]        __run_selftests.part.3+0x10d/0x172 [i915]
<4>[  462.593428]        i915_live_selftests.cold.5+0x1f/0x47 [i915]
<4>[  462.593860]        i915_pci_probe+0x93/0x1d0 [i915]
<4>[  462.594210]        pci_device_probe+0x9e/0x110
<4>[  462.594217]        really_probe+0xea/0x410
<4>[  462.594226]        driver_probe_device+0xd9/0x140
<4>[  462.594233]        device_driver_attach+0x4a/0x50
<4>[  462.594240]        __driver_attach+0x83/0x140
<4>[  462.594247]        bus_for_each_dev+0x75/0xc0
<4>[  462.594254]        bus_add_driver+0x14b/0x1f0
<4>[  462.594260]        driver_register+0x66/0xb0
<4>[  462.594267]        i915_init+0x70/0x87 [i915]
<4>[  462.594586]        do_one_initcall+0x56/0x2e0
<4>[  462.594592]        do_init_module+0x55/0x200
<4>[  462.594599]        load_module+0x2703/0x2990
<4>[  462.594605]        __do_sys_finit_module+0xad/0x110
<4>[  462.594612]        do_syscall_64+0x33/0x80
<4>[  462.594618]        entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[  462.594625]
                  other info that might help us debug this:

<4>[  462.594629] Chain exists of:
                    cpu_hotplug_lock --> fs_reclaim --> &vm->mutex/1

<4>[  462.594645]  Possible unsafe locking scenario:

<4>[  462.594648]        CPU0                    CPU1
<4>[  462.594652]        ----                    ----
<4>[  462.594655]   lock(&vm->mutex/1);
<4>[  462.594664]                                lock(fs_reclaim);
<4>[  462.594671]                                lock(&vm->mutex/1);
<4>[  462.594679]   lock(cpu_hotplug_lock);
<4>[  462.594686]
                   *** DEADLOCK ***

<4>[  462.594690] 4 locks held by i915_selftest/5540:
<4>[  462.594696]  #0: ffff888100fbc240 (&dev->mutex){....}-{3:3}, at: device_driver_attach+0x18/0x50
<4>[  462.594715]  #1: ffffc900006cb9a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: make_obj_busy+0x81/0x330 [i915]
<4>[  462.595118]  #2: ffff88812a6081e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: make_obj_busy+0x21f/0x330 [i915]
<4>[  462.595519]  #3: ffff888125369c70 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x38e/0xb40 [i915]
<4>[  462.595934]
                  stack backtrace:
<4>[  462.595939] CPU: 0 PID: 5540 Comm: i915_selftest Tainted: G     U            5.12.0-rc5-CI-Trybot_7644+ #1
<4>[  462.595947] Hardware name: GOOGLE Kefka/Kefka, BIOS MrChromebox 02/04/2018
<4>[  462.595952] Call Trace:
<4>[  462.595961]  dump_stack+0x7f/0xad
<4>[  462.595974]  check_noncircular+0x12e/0x150
<4>[  462.595982]  ? save_stack.isra.17+0x3f/0x70
<4>[  462.595991]  ? drm_mm_insert_node_in_range+0x34a/0x5b0
<4>[  462.596000]  ? i915_vma_pin_ww+0x9ec/0xb40 [i915]
<4>[  462.596410]  __lock_acquire+0x1520/0x2590
<4>[  462.596419]  ? do_init_module+0x55/0x200
<4>[  462.596429]  lock_acquire+0xd1/0x3d0
<4>[  462.596435]  ? stop_machine+0x12/0x30
<4>[  462.596445]  ? gen8_ggtt_insert_entries+0xf0/0xf0 [i915]
<4>[  462.596816]  cpus_read_lock+0x39/0xc0
<4>[  462.596824]  ? stop_machine+0x12/0x30
<4>[  462.596831]  stop_machine+0x12/0x30
<4>[  462.596839]  bxt_vtd_ggtt_insert_entries__BKL+0x36/0x50 [i915]
<4>[  462.597210]  ggtt_bind_vma+0x5d/0x80 [i915]
<4>[  462.597580]  i915_vma_bind+0xdc/0x1c0 [i915]
<4>[  462.597986]  i915_vma_pin_ww+0x435/0xb40 [i915]
<4>[  462.598395]  ? make_obj_busy+0xcb/0x330 [i915]
<4>[  462.598786]  make_obj_busy+0xcb/0x330 [i915]
<4>[  462.599180]  ? 0xffffffff81000000
<4>[  462.599187]  ? debug_mutex_unlock+0x50/0xa0
<4>[  462.599198]  igt_mmap_offset_exhaustion+0x45f/0x4c0 [i915]
<4>[  462.599592]  __i915_subtests.cold.7+0x42/0x92 [i915]
<4>[  462.600026]  ? i915_perf_selftests+0x20/0x20 [i915]
<4>[  462.600422]  ? __i915_nop_setup+0x10/0x10 [i915]
<4>[  462.600820]  __run_selftests.part.3+0x10d/0x172 [i915]
<4>[  462.601253]  i915_live_selftests.cold.5+0x1f/0x47 [i915]
<4>[  462.601686]  i915_pci_probe+0x93/0x1d0 [i915]
<4>[  462.602037]  ? _raw_spin_unlock_irqrestore+0x3d/0x60
<4>[  462.602047]  pci_device_probe+0x9e/0x110
<4>[  462.602057]  really_probe+0xea/0x410
<4>[  462.602067]  driver_probe_device+0xd9/0x140
<4>[  462.602075]  device_driver_attach+0x4a/0x50
<4>[  462.602084]  __driver_attach+0x83/0x140
<4>[  462.602091]  ? device_driver_attach+0x50/0x50
<4>[  462.602099]  ? device_driver_attach+0x50/0x50
<4>[  462.602107]  bus_for_each_dev+0x75/0xc0
<4>[  462.602116]  bus_add_driver+0x14b/0x1f0
<4>[  462.602124]  driver_register+0x66/0xb0
<4>[  462.602133]  i915_init+0x70/0x87 [i915]
<4>[  462.602453]  ? 0xffffffffa0606000
<4>[  462.602458]  do_one_initcall+0x56/0x2e0
<4>[  462.602466]  ? kmem_cache_alloc_trace+0x374/0x430
<4>[  462.602476]  do_init_module+0x55/0x200
<4>[  462.602484]  load_module+0x2703/0x2990
<4>[  462.602500]  ? __do_sys_finit_module+0xad/0x110
<4>[  462.602507]  __do_sys_finit_module+0xad/0x110
<4>[  462.602519]  do_syscall_64+0x33/0x80
<4>[  462.602527]  entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[  462.602535] RIP: 0033:0x7fab69d8d89d

Changes since v1:
- Add lockdep annotations during init, to ensure that lockdep is primed.
  This also fixes a false positive when reading /proc/lockdep_stats
  during module reload.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426102351.921874-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

drm/i915/gem: Remove reference to struct drm_device.pdev

References to struct drm_device.pdev should not be used any longer as
the field will be moved into the struct's legacy section. Add a fix
for the rsp commit.

v2:
* fix an error in the commit description (Michael)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: d57d4a1daf5e ("drm/i915: Create stolen memory region from local memory")
Cc: CQ Tang <cq.tang@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xinyun Liu <xinyun.liu@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@intel.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427174857.7862-1-tzimmermann@suse.de

drm/i915: Fix crash in auto_retire

The retire logic uses the 2 lower bits of the pointer to the retire
function to store flags. However, the auto_retire function is not
guaranteed to be aligned to a multiple of 4, which causes crashes as
we jump to the wrong address, for example like this:

2021-04-24T18:03:53.804300Z WARNING kernel: [  516.876901] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
2021-04-24T18:03:53.804310Z WARNING kernel: [  516.876906] CPU: 7 PID: 146 Comm: kworker/u16:6 Tainted: G     U            5.4.105-13595-g3cd84167b2df #1
2021-04-24T18:03:53.804311Z WARNING kernel: [  516.876907] Hardware name: Google Volteer2/Volteer2, BIOS Google_Volteer2.13672.76.0 02/22/2021
2021-04-24T18:03:53.804312Z WARNING kernel: [  516.876911] Workqueue: events_unbound active_work
2021-04-24T18:03:53.804313Z WARNING kernel: [  516.876914] RIP: 0010:auto_retire+0x1/0x20
2021-04-24T18:03:53.804314Z WARNING kernel: [  516.876916] Code: e8 01 f2 ff ff eb 02 31 db 48 89 d8 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 f0 ff 87 c8 00 00 00 0f 88 ab 47 4a 00 31 c0 5d c3 0f <1f> 44 00 00 55 48 89 e5 f0 ff 8f c8 00 00 00 0f 88 9a 47 4a 00 74
2021-04-24T18:03:53.804319Z WARNING kernel: [  516.876918] RSP: 0018:ffff9b4d809fbe38 EFLAGS: 00010286
2021-04-24T18:03:53.804320Z WARNING kernel: [  516.876919] RAX: 0000000000000007 RBX: ffff927915079600 RCX: 0000000000000007
2021-04-24T18:03:53.804320Z WARNING kernel: [  516.876921] RDX: ffff9b4d809fbe40 RSI: 0000000000000286 RDI: ffff927915079600
2021-04-24T18:03:53.804321Z WARNING kernel: [  516.876922] RBP: ffff9b4d809fbe68 R08: 8080808080808080 R09: fefefefefefefeff
2021-04-24T18:03:53.804321Z WARNING kernel: [  516.876924] R10: 0000000000000010 R11: ffffffff92e44bd8 R12: ffff9279150796a0
2021-04-24T18:03:53.804322Z WARNING kernel: [  516.876925] R13: ffff92791c368180 R14: ffff927915079640 R15: 000000001c867605
2021-04-24T18:03:53.804323Z WARNING kernel: [  516.876926] FS:  0000000000000000(0000) GS:ffff92791ffc0000(0000) knlGS:0000000000000000
2021-04-24T18:03:53.804323Z WARNING kernel: [  516.876928] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
2021-04-24T18:03:53.804324Z WARNING kernel: [  516.876929] CR2: 0000239514955000 CR3: 00000007f82da001 CR4: 0000000000760ee0
2021-04-24T18:03:53.804325Z WARNING kernel: [  516.876930] PKRU: 55555554
2021-04-24T18:03:53.804325Z WARNING kernel: [  516.876931] Call Trace:
2021-04-24T18:03:53.804326Z WARNING kernel: [  516.876935]  __active_retire+0x77/0xcf
2021-04-24T18:03:53.804326Z WARNING kernel: [  516.876939]  process_one_work+0x1da/0x394
2021-04-24T18:03:53.804327Z WARNING kernel: [  516.876941]  worker_thread+0x216/0x375
2021-04-24T18:03:53.804327Z WARNING kernel: [  516.876944]  kthread+0x147/0x156
2021-04-24T18:03:53.804335Z WARNING kernel: [  516.876946]  ? pr_cont_work+0x58/0x58
2021-04-24T18:03:53.804335Z WARNING kernel: [  516.876948]  ? kthread_blkcg+0x2e/0x2e
2021-04-24T18:03:53.804336Z WARNING kernel: [  516.876950]  ret_from_fork+0x1f/0x40
2021-04-24T18:03:53.804336Z WARNING kernel: [  516.876952] Modules linked in: cdc_mbim cdc_ncm cdc_wdm xt_cgroup rfcomm cmac algif_hash algif_skcipher af_alg xt_MASQUERADE uinput snd_soc_rt5682_sdw snd_soc_rt5682 snd_soc_max98373_sdw snd_soc_max98373 snd_soc_rl6231 regmap_sdw snd_soc_sof_sdw snd_soc_hdac_hdmi snd_soc_dmic snd_hda_codec_hdmi snd_sof_pci snd_sof_intel_hda_common intel_ipu6_psys snd_sof_xtensa_dsp soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof snd_soc_hdac_hda snd_soc_acpi_intel_match snd_soc_acpi snd_hda_ext_core soundwire_bus snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core intel_ipu6_isys videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops mei_hdcp intel_ipu6 ov2740 ov8856 at24 sx9310 dw9768 v4l2_fwnode cros_ec_typec intel_pmc_mux roles acpi_als typec fuse iio_trig_sysfs cros_ec_light_prox cros_ec_lid_angle cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer cros_ec_sensors_ring kfifo_buf industrialio cros_ec_sensorhub
2021-04-24T18:03:53.804337Z WARNING kernel: [  516.876972]  cdc_ether usbnet iwlmvm lzo_rle lzo_compress iwl7000_mac80211 iwlwifi zram cfg80211 r8152 mii btusb btrtl btintel btbcm bluetooth ecdh_generic ecc joydev
2021-04-24T18:03:53.804337Z EMERG kernel: [  516.879169] gsmi: Log Shutdown Reason 0x03

This change fixes this by aligning the function.

Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Fixes: 229007e02d69 ("drm/i915: Wrap i915_active in a simple kreffed struct")
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429031021.1218091-1-marcheu@chromium.org

drm/i915: Return error value when bo not in LMEM for discrete

Return EREMOTE value when frame buffer object is not backed by LMEM
for discrete. If Local memory is supported by hardware the framebuffer
backing gem objects should be from local memory.

Signed-off-by: Mohammed Khajapasha <mohammed.khajapasha@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-7-matthew.auld@intel.com

drm/i915/lmem: Bypass aperture when lmem is available

In the scenario where local memory is available, we have
rely on CPU access via lmem directly instead of aperture.

v2:
gmch is only relevant for much older hw, therefore we can drop the
has_aperture check since it should always be present on such platforms.
(Chris)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris P Wilson <chris.p.wilson@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-6-matthew.auld@intel.com

drm/i915/fbdev: Use lmem physical addresses for fb_mmap() on discrete

Use local memory io BAR address for fbdev's fb_mmap() operation on
discrete, fbdev uses the physical address of our framebuffer for its
fb_mmap() fn.

Signed-off-by: Mohammed Khajapasha <mohammed.khajapasha@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-5-matthew.auld@intel.com

drm/i915/gtt/dgfx: place the PD in LMEM

It's a requirement that for dgfx we place all the paging structures in
device local-memory.

v2: use i915_coherent_map_type()
v3: improve the shared dma-resv object comment

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-4-matthew.auld@intel.com

drm/i915/gtt: map the PD up front

We need to generalise our accessor for the page directories and tables from
using the simple kmap_atomic to support local memory, and this setup
must be done on acquisition of the backing storage prior to entering
fence execution contexts. Here we replace the kmap with the object
mapping code that for simple single page shmemfs object will return a
plain kmap, that is then kept for the lifetime of the page directory.

Note that keeping the mapping around is a potential concern here, since
while the vma is pinned the mapping remains there for the PDs
underneath, or at least until the used_count reaches zero, at which
point we can safely destroy the mapping. For 32b this will be even worse
since the address space is more limited, but since this change mostly
impacts full ppGTT platforms, the justification is that for modern
platforms we shouldn't care too much about 32b.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-3-matthew.auld@intel.com

drm/i915: Update the helper to set correct mapping

Determine the possible coherent map type based on object location,
and if target has llc or if user requires an always coherent
mapping.

Cc: Matthew Auld <matthew.auld@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-2-matthew.auld@intel.com

drm/i915/dg1: Fix mapping type for default state object

Use I915_MAP_WC when default state object is allocated in LMEM.

Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-1-matthew.auld@intel.com

drm/i915/gt: Fix a double free in gen8_preallocate_top_level_pdp

Our code analyzer reported a double free bug.

In gen8_preallocate_top_level_pdp, pde and pde->pt.base are allocated
via alloc_pd(vm) with one reference. If pin_pt_dma() failed, pde->pt.base
is freed by i915_gem_object_put() with a reference dropped. Then free_pd
calls free_px() defined in intel_ppgtt.c, which calls i915_gem_object_put()
to put pde->pt.base again.

As pde->pt.base is protected by refcount, so the second put will not free
pde->pt.base actually. But, maybe it is better to remove the first put?

Fixes: 82adf901138cc ("drm/i915/gt: Shrink i915_page_directory's slab bucket")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426124340.4238-1-lyl2019@mail.ustc.edu.cn

drm/i915: Give C0DRB3/C1DRB3 a _BW suffix

These are the 965g/g45/g33 specific DRB registers. Give them
a suitable suffix so we can add their counterparts for other
platforms.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-4-ville.syrjala@linux.intel.com

drm/i915: Read C0DRB3/C1DRB3 as 16 bits again

We've defined C0DRB3/C1DRB3 as 16 bit registers, so access them
as such.

Fixes: 1c8242c3a4b2 ("drm/i915: Use unchecked writes for setting up the fences")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-3-ville.syrjala@linux.intel.com

drm/i915: Avoid div-by-zero on gen2

Gen2 tiles are 2KiB in size so i915_gem_object_get_tile_row_size()
can in fact return <4KiB, which leads to div-by-zero here.
Avoid that.

Not sure i915_gem_object_get_tile_row_size() is entirely
sane anyway since it doesn't account for the different tile
layouts on i8xx/i915...

I'm not able to hit this before commit 6846895fde05 ("drm/i915:
Replace PIN_NONFAULT with calls to PIN_NOEVICT") and it looks
like I also need to run recent version of Mesa. With those in
place xonotic trips on this quite easily on my 85x.

Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-2-ville.syrjala@linux.intel.com

drm/i915: Fix docbook descriptions for i915_cmd_parser

Fixes the following htmldocs warnings:
drivers/gpu/drm/i915/i915_cmd_parser.c:1420: warning: Excess function parameter 'trampoline' description in 'intel_engine_cmd_parser'
drivers/gpu/drm/i915/i915_cmd_parser.c:1420: warning: Function parameter or member 'jump_whitelist' not described in 'intel_engine_cmd_parser'
drivers/gpu/drm/i915/i915_cmd_parser.c:1420: warning: Function parameter or member 'shadow_map' not described in 'intel_engine_cmd_parser'
drivers/gpu/drm/i915/i915_cmd_parser.c:1420: warning: Function parameter or member 'batch_map' not described in 'intel_engine_cmd_parser'
drivers/gpu/drm/i915/i915_cmd_parser.c:1420: warning: Excess function parameter 'trampoline' description in 'intel_engine_cmd_parser'

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421120353.544518-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Fix docbook descriptions for i915_gem_shrinker

Fixes the following htmldocs warning:
drivers/gpu/drm/i915/gem/i915_gem_shrinker.c:102: warning: Function parameter or member 'ww' not described in 'i915_gem_shrink'

Fixes: cf41a8f1dc1e ("drm/i915: Finally remove obj->mm.lock.")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421120938.546076-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/stolen: actually mark as contiguous

Stolen memory is always allocated as physically contiguous pages, so
mark the object flags as such. It looks like the flags were previously
just ignored so this had no effect. In the future we might to add the
proper plumbing for passing the flags all over the way down from the
caller, but for now we don't have a use for that.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-4-matthew.auld@intel.com

drm/i915/stolen: enforce the min_page_size contract

Since stolen can now be device local-memory underneath, we should try to
enforce any min_page_size restrictions when allocating pages.

Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-3-matthew.auld@intel.com

drm/i915/stolen: treat stolen local as normal local memory

Underneath it's the same stuff, so things like the PTE_LM bits for the
GTT should just keep working as-is.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-2-matthew.auld@intel.com

drm/i915: Create stolen memory region from local memory

Add "REGION_STOLEN" device info to dg1, create stolen memory
region from upper portion of local device memory, starting
from DSMBASE.

v2:
    - s/drm_info/drm_dbg; userspace likely doesn't care about stolen.
    - mem->type is only setup after the region probe, so setting the name
      as stolen-local or stolen-system based on this value won't work. Split
      system vs local stolen setup to fix this.
    - kill all the region->devmem/is_devmem stuff. We already differentiate
      the different types of stolen so such things shouldn't be needed
      anymore.
v3:
    - split stolen lmem vs smem ops(Tvrtko)
    - add shortcut for stolen region in i915(Tvrtko)
    - sanity check dsm base vs bar size(Xinyun)
v4(Tvrtko):
    - more cleanup
    - add some TODOs

Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xinyun Liu <xinyun.liu@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-1-matthew.auld@intel.com

drm/i915/lmem: Fail driver init if LMEM training failed

Boot firmware performs memory training and health assessment during
startup.  If the memory training fails, the firmware will consider the
GPU unusable and will instruct the punit to keep the GT powered down.
If this happens, our driver will be unable to communicate with the GT
(all GT registers will read back as 0, forcewake requests will timeout,
etc.) so we should abort driver initialization if this happens.  We can
confirm that LMEM was initialized successfully via sgunit register
GU_CNTL.

Bspec: 53111
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Caz Yokoyama <Caz.Yokoyama@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210420131842.164163-5-matthew.auld@intel.com

drm/doc: add section for driver uAPI

Add section for drm/i915 uAPI and pull in i915_drm.h.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419105741.27844-2-matthew.auld@intel.com

drm/i915/selftests: Rename pm_ prefixed functions names

pm_resume and pm_suspend might be conflict with the ones defined in
include/linux/suspend.h. Rename all pm_* to igt_pm_* in selftests since
they are only used here.

v2 by Jani:
- Use igt_ prefix instead of i915_ to avoid colliding with existing
  i915_pm_* functions
- Rename all pm_ prefixed functions in the file

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210420130853.10573-1-jani.nikula@intel.com

drm/i915/selftests: Only query RAPL for integrated power measurements

RAPL provides an on-package power measurements which does not encompass
discrete graphics, so let's avoid using the igfx masurements when testing
dgfx. Later we will abstract the simple librapl interface over hwmon so
that we can verify basic power consumption scenarios.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412090526.30547-3-matthew.auld@intel.com

drm/i915/selftests: Skip aperture remapping selftest where there is no aperture

If there is no mappable aperture, we cannot remap it for access, and the
selftest is void.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412090526.30547-2-matthew.auld@intel.com

Merge tag 'topic/intel-gen-to-ver-2021-04-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-gt-next

Gen to ver conversions across the driver

The main change is Lucas' series [1], with Ville's GLK fixes [2] and a
cherry-pick of Matt's commit [3] from drm-intel-next as a base to avoid
conflicts.

[1] https://patchwork.freedesktop.org/series/88825/
[2] https://patchwork.freedesktop.org/series/88938/
[3] 70bfb30743d5 ("drm/i915/display: Eliminate IS_GEN9_{BC,LP}")

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/878s5ebny0.fsf@intel.com

drm/i915/uapi: convert i915_query and friend to kernel doc

Add a note about the two-step process.

v2(Tvrtko):
  - Also document the other method of just passing in a buffer which is
    large enough, which avoids two ioctl calls. Can make sense for
    smaller query items.
v3: prefer kernel-doc references for structs and members

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419105741.27844-4-matthew.auld@intel.com

drm/i915/uapi: convert i915_user_extension to kernel doc

Add some example usage for the extension chaining also, which is quite
nifty.

v2: (Daniel)
  - clarify that the name is just some integer, also document that the
    name space is not global
v3: prefer kernel-doc references for structs

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419105741.27844-3-matthew.auld@intel.com

drm/i915/uapi: fix kernel doc warnings

Fix the cases where it is almost already valid kernel doc, for the
others just nerf the warnings for now.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: mesa-dev@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419105741.27844-1-matthew.auld@intel.com

drm/i915: split dgfx features from gen 12

Make them independent so we can use DGFX_FEATURES more generically.
For future platforms that do not use the GEN nomenclature we will define
graphics, media and display separately, so we avoid setting graphics_ver
with the GEN() macro.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-13-lucas.demarchi@intel.com

drm/i915: add media and display versions to device_info print

Since we are now converting from a single gen version to graphics_ver,
media_ver and display_ver, add the last 2 when printing the device info.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-12-lucas.demarchi@intel.com

drm/i915: finish removal of gen from intel_device_info

Now that it's not being used anymore, finish its removal. Like for
gen_mask, we replace INTEL_GEN() and IS_GEN()  macros to use the new
field.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Jani: Minor code comment change while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-11-lucas.demarchi@intel.com

drm/i915: eliminate remaining uses of intel_device_info->gen

Replace gen with the new graphics_ver value and use GRAPHICS_VER()
in those places.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-10-lucas.demarchi@intel.com

drm/i915: finish removal of gen_mask

Now that it's not used anywhere, remove it from struct
intel_device_info. To allow a period in which code will be converted to
the new macro, keep IS_GEN_RANGE() around, just redefining it to use
the new fields. The size advantage from IS_GEN_RANGE() using a mask is
not that big as it has pretty limited use througout the driver:

   text    data     bss     dec     hex filename
2758497   95965    6496 2860958  2ba79e drivers/gpu/drm/i915/i915.ko.old
2758586   95953    6496 2861035  2ba7eb drivers/gpu/drm/i915/i915.ko.new

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Jani: Minor code comment change while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-9-lucas.demarchi@intel.com

drm/i915/selftests: eliminate use of gen_mask

Remove the remaining uses of INTEL_GEN_MASK() and the correspondent
gen_mask in struct intel_device_info. This will allow the removal of
gen_mask later since it's incompatible with the new per-IP versioning
scheme.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-8-lucas.demarchi@intel.com

drm/i915/selftests: replace unused mask with simple version

Since its introduction 2 years ago, we never used the mask to span more
than one gen. Replace gen_mask a single number and start using the new
GRAPHICS_VER().

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-7-lucas.demarchi@intel.com

drm/i915/gt: replace gen use in intel_engine_cs

Start using the new fields graphics_version for the previous gen checks.
Here we rename the "gen" field and replace the comparisons using it to
start using the new GRAPHICS_VER(). Other uses of INTEL_GEN() were left
as is for automatic conversion later.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-6-lucas.demarchi@intel.com

drm/i915: add macros for graphics and media versions

Like it was done in
commit 01eb15c9165e ("drm/i915: Add DISPLAY_VER() and related macros")
add the correspondent macros for graphics and media. Going forward we
will prefer checking the versions for the specific IPs (graphics, media
and display) rather than grouping everything under a "gen" version.

For consistency and to make the maintenance easier, it'd be preferred
not to mix the *GEN* macros with the new ones. For older platforms we
can simply consider that the previous "gen" number will extend to all
3 IPs. Then we can start replacing its use in the driver. Right now this
replacement is not done and only the infrastructure is put in place.
We also leave gen and gen_mask inside struct intel_device_info while
it's still being used throughout the code.

v2: Repurpose IS_{GRAPHICS,MEDIA}_VER() macros to work with a range

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[Jani: Minor code comment change while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-5-lucas.demarchi@intel.com

drm/i915/display: rename display version macros

While converting the rest of the driver to use GRAPHICS_VER() and
MEDIA_VER(), following what was done for display, some discussions went
back on what we did for display:

1) Why is the == comparison special that deserves a separate
macro instead of just getting the version and comparing directly
like is done for >, >=, <=?

2) IS_DISPLAY_RANGE() is weird in that it omits the "_VER" for
brevity. If we remove the current users of IS_DISPLAY_VER(), we
could actually repurpose it for a range check

With (1) there could be an advantage if we used gen_mask since multiple
conditionals be combined by the compiler in a single and instruction and
check the result. However a) INTEL_GEN() doesn't use the mask since it
would make the code bigger everywhere else and b) in the cases it made
sense, it also made sense to convert to the _RANGE() variant.

So here we repurpose IS_DISPLAY_VER() to work with a [ from, to ] range
like was the IS_DISPLAY_RANGE() and convert the current IS_DISPLAY_VER()
users to use == and != operators. Aside from the definition changes,
this was done by the following semantic patch:

@@ expression dev_priv, E1; @@
- !IS_DISPLAY_VER(dev_priv, E1)
+ DISPLAY_VER(dev_priv) != E1

@@ expression dev_priv, E1; @@
- IS_DISPLAY_VER(dev_priv, E1)
+ DISPLAY_VER(dev_priv) == E1

@@ expression dev_priv, from, until; @@
- IS_DISPLAY_RANGE(dev_priv, from, until)
+ IS_DISPLAY_VER(dev_priv, from, until)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Jani: Minor conflict resolve while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-4-lucas.demarchi@intel.com

drm/i915: rename display.version to display.ver

The macro we use to check is called DISPLAY_VER(). While using this
macro and the new ones being added in following changes I made the
mistake multiple times when mixing both "ver" and "version". Although
it's usually better to prefer the complete name, the shorhand
DISPLAY_VER() / GRAPHICS_VER / MEDIA_VER are clear and cause less
visual polution.

Another issue is when copying the variable to other places.
"display.version" would be copied to a "display_version" variable which
is long and would make people abbreviate as "version", or "display_ver".
In the first case it's not always clear what version refers to, and in
the second case it just hints it should be the name in the first place.

So, in the same way use used "gen" rather than "generation", use "ver"
instead of "version".

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-3-lucas.demarchi@intel.com

drm/i915/display: use DISPLAY_VER() on remaining users

Commit 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver")
added INTEL_GEN() in the display code, where it should actually be using
DISPLAY_VER(). Switch to the new macro.

Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-2-lucas.demarchi@intel.com

drm/i915: Remove a few redundant glk checks

Now that glk display version is 10 we can drop a few more glk checks.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-6-ville.syrjala@linux.intel.com

drm/i915: Don't use {skl, cnl}_hpd_pin() for bxt/glk

Just let bxt/glk fall back to intel_hpd_pin_default() instead
of using skl_hpd_pin() or cnl_hpd_pin(). Doesn't really matter
since both functions will end up returning the correct hpd pin
anyway, but I find it a bit less confusing when bxt/glk are
fully separated from the logic for the other platforms.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-5-ville.syrjala@linux.intel.com

drm/i915: Disable LTTPR detection on GLK once again

The glk display version change is causing us to again attempt
LTTPR detection on glk. We must not do tha since glk doesn't
have a long enough AUX timeout. Restore the correct logic to
skip the detection.

Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-4-ville.syrjala@linux.intel.com

drm/i915: Restore lost glk ccs w/a

We lost a CCS related w/a on glk when the display version
became 10 instead of 9. Restore the correct check.

Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-3-ville.syrjala@linux.intel.com

drm/i915: Restore lost glk FBC 16bpp w/a

We lost the FBC 16bpp 512byte stride requirement on glk when
we switched from display version 9 to 10. Restore the w/a to
avoid enabling FBC with a bad stride and thus display garbage.

Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-2-ville.syrjala@linux.intel.com

drm/i915/display: Eliminate IS_GEN9_{BC,LP}

Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too.  We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.

v2:
 - Restore a lost negation in intel_pll_is_valid().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com
(cherry picked from commit 70bfb30743d5da73058b0a2271e9c127a84fb494)
[Jani: cherry picked to topic branch to reduce conflicts]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/pmu: Check actual RC6 status

RC6 support cannot be simply established by looking at the static device
HAS_RC6() flag. There are cases which disable RC6 at driver load time so
use the status of those check when deciding whether to enumerate the rc6
counter.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Eero T Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210331101850.2582027-1-tvrtko.ursulin@linux.intel.com

drm/i915: Take request reference before arming the watchdog timer

Reference needs to be taken before arming the timer. Luckily, given the
default timer period of 20s, the potential to hit the race is extremely
unlikely.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 9b4d0598ee94 ("drm/i915: Request watchdog infrastructure")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326105759.2387104-1-tvrtko.ursulin@linux.intel.com

drm/i915: Add Wa_14011060649

This is a permanent workaround for TGL,RKL,DG1 and ADLS.

Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-5-lucas.demarchi@intel.com

drm/i915: Move Wa_16011163337 to gen12_ctx_workarounds_init()

This WA is needed in all gen12 platforms, moving it to
gen12_ctx_workarounds_init() allow us to remove the duplicated
implementation.
Also allow us to remove the tgl_ctx_workarounds_init() that after the
WA move above was empty.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-4-lucas.demarchi@intel.com

drm/i915/icl: add Wa_22010271021 for all gen11

Wa_22010271021 does not apply only to EHL, but to all gen11 and other
gen12 platforms. Gen12 is already covered in another code path, but we
need to stop checking for EHL when handling gen11.

Bspec: 33450, 52887

v2: Remove "gen11" suffix as it also applies to gen12 platforms

Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-3-lucas.demarchi@intel.com

drm/i915/gen12: Add recommended hardware tuning value

Follow Bspec 31870 to set recommended tuning values for certain GT
register.  These values aren't workarounds per-se, but it's best to
handle them in the same general area of the driver, especially since
there may be real workarounds that update other bits of the same
registers.

At the moment the only value we need to worry about is the
TDS_TIMER setting in FF_MODE2.  This setting was previously
described as "Wa_1604555607" on some platforms, but the spec
tells us that we should continue to program this on all current
gen12 platforms, even those that do not have that WA.

Bspec: 31870

v2: Rephrase some comments to make them clearer (Matt)

Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-2-lucas.demarchi@intel.com

Merge tag 'drm-intel-next-2021-04-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Features:
- Add support for FBs requiring a power-of-two stride padding (Imre)

Refactoring:
- Disassociate display version from gen (Matt)
- Refactor legacy DP and HDMI code to separate files (Ville)
- Refactor FB plane code to a separate file (Imre)
- Refactor VBT child device info parsing and usage (Jani)
- Refactor KBL/TGL/ADL-S display and gt stepping schemes (Jani)

Fixes:
- DP Link-Training Tunable PHY Repeaters (LTTPR) fixes (Imre)
- HDCP fixes (Anshuman)
- DP 2.0 HDMI 2.1 PCON Fixed Rate Link (FRL) fixes (Ankit)
- Set HDA link parameters in driver (Kai)
- Fix enabled_planes bitmask (Ville)
- Fix transposed arguments to skl_plane_wm_level() (Ville)
- Stop adding planes to the commit needlessly (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v996ml17.fsf@intel.com

Merge tag 'drm-intel-gt-next-2021-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

- Prepare for local/device memory support on DG1 by starting
  to use it for kernel internal allocations: context, ring
  and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)

- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)

- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com

Merge tag 'mediatek-drm-next-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 5.13

1. Fine tune the line time for EOTp.
2. Add support mt8192 dpi.
3. Make crtc config-updating atomic.
4. Don't support hdmi connector creation.

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210405082248.3578-1-chunkuang.hu@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-misc-next-2021-04-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.13:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - mst: Improve topology logging
  - edid: Rework and improvements for displayid

Driver Changes:
  - anx7625: Regulators support
  - bridge: Support for the Chipone ICN6211, Lontium LT8912B
  - lt9611: Fix 4k panels handling

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401110552.2b3yetlgsjtlotcn@gilmour

drm/mediatek: Don't support hdmi connector creation

commit f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
broke the display support for elm device since mtk_dpi calls
drm_bridge_attach with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR
while mtk_hdmi does not yet support this flag.

Fix this by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in bridge attachment.
Implement the drm_bridge_funcs .detect() and .get_edid() operations, and
call drm_bridge_hpd_notify() to report HPD. This provides the
necessary API to support disabling connector creation.

In addition, the field 'conn' is removed from the mtk_hdmi struct since
mtk_hdmi don't create a connector. It is replaced with a pointer
'curr_conn' that points to the current connector which can be access
through the global state.

This patch is inspired by a similar patch for bridge/synopsys/dw-hdmi.c:
commit ec971aaa6775
("drm: bridge: dw-hdmi: Make connector creation optional")
But with the difference that in mtk-hdmi only the option of not creating
a connector is supported.

Fixes: f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Switch the hdmi bridge ops to the atomic versions

The bridge operation '.enable' and the audio cb '.get_eld'
access hdmi->conn. In the future we will want to support
the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR and then we will
not have direct access to the connector.
The atomic version '.atomic_enable' allows accessing the
current connector from the state.
This patch switches the bridge to the atomic version to
prepare access to the connector in later patches.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/bridge: anx7625: disable regulators when power off

When suspending the driver, anx7625_power_standby() will be called to
turn off reset-gpios and enable-gpios. However, power supplies are not
disabled. To save power, the driver can get the power supply regulators
and turn off them in anx7625_power_standby().

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401053202.159302-2-hsinyi@chromium.org

dt-bindings: drm/bridge: anx7625: Add power supplies

anx7625 requires 3 power supply regulators.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401053202.159302-1-hsinyi@chromium.org

Merge tag 'exynos-drm-next-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

One cleanup
- Based on the patch[1], clean up the use of request_irq function
  series.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?id=cbe16f35bee6880becca6f20d2ebf6b457148552

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1617092998-23645-1-git-send-email-inki.dae@samsung.com

Merge tag 'topic/i915-gem-next-2021-03-26' of ssh://git.freedesktop.org/git/drm/drm into drm-next

special i915-gem-next pull as requested

- Conversion to dma_resv_locking, obj->mm.lock is gone (Maarten, with
  help from Thomas Hellström)
- watchdog (Tvrtko, one patch to cancel individual request from Chris)
- legacy ioctl cleanup (Jason+Ashutosh)
- i915-gem TODO and RFC process doc (me)
- i915_ prefix for vma_lookup (Liam Howlett) just because I spotted it
  and put it in here too

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YF24MHoOSjpKFEXA@phenom.ffwll.local

drm/i915: Fix docbook header for __intel_runtime_pm_get_if_active()

Fix the

Documentation/gpu/i915:22: /drivers/gpu/drm/i915/intel_runtime_pm.c:423: WARNING: Inline strong start-string without end-string.

warning from the htmldocs build.

Fixes: 9d58aa46291d ("drm/i915: Fix the GT fence revocation runtime PM logic")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210330150118.1105079-1-imre.deak@intel.com

drm/displayid: rename displayid_hdr to displayid_header

Avoid any confusion with High Dynamic Range. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ce083bd2789c7e22a91710726162287db88e3f6c.1617024940.git.jani.nikula@intel.com

drm/displayid: allow data blocks with 0 payload length

The DisplayID specifications explicitly call out 0 as a valid payload
length for data blocks. The mere presence of a data block, or the
information coded in the block specific data (bits 7:3 in offset 1), may
be enough to convey the necessary information.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d562dff99ba7c92accb654a99b433bed471e8507.1617024940.git.jani.nikula@intel.com

drm/edid: use the new displayid iterator for tile info

Neatly reduce displayid boilerplate in code. Remove excessive debug
logging while at it, no other functional changes.

The old displayid iterator becomes unused; remove it as well as make
drm_find_displayid_extension() static.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fa4b5c790b5bdd82063545a6f209f8e9d78a63a7.1617024940.git.jani.nikula@intel.com

drm/edid: use the new displayid iterator for finding CEA extension

Neatly reduce displayid boilerplate in code. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e50f876cecbfee369da887ad19350eee0d89b87f.1617024940.git.jani.nikula@intel.com

drm/edid: use the new displayid iterator for detailed modes

Neatly reduce displayid boilerplate in code. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f6c69c545c553c4a616887540660a4b8aecf0f7f.1617024940.git.jani.nikula@intel.com

drm/displayid: add new displayid section/block iterators

Iterating DisplayID blocks across sections (in EDID extensions) is
unnecessarily complicated for the caller. Implement DisplayID iterators
to go through all blocks in all sections.

Usage example:

const struct displayid_block *block;
struct displayid_iter iter;

displayid_iter_edid_begin(edid, &iter);
displayid_iter_for_each(block, &iter) {
/* operate on block */
}
displayid_iter_end(&iter);

When DisplayID is stored in EDID extensions, the DisplayID sections map
to extensions as described in VESA DisplayID v1.3 Appendix B: DisplayID
as an EDID Extension. This is implemented here.

When DisplayID is stored in its dedicated DDC device 0xA4, according to
VESA E-DDC v1.3, different rules apply for the structure. This is not
implemented here, as we don't currently use it, but the idea is you'd
have a different call for beginning the iteration, for example simply:

displayid_iter_begin(displayid, &iter);

instead of displayid_iter_edid_begin(), and everything else would be
hidden away in the iterator functions.

v2:
- sizeof(struct displayid_block) -> sizeof(*block) (Ville)
- remove __ prefix from displayid_iter_block

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da3dead1752ab16c061f7bd248ac1a4268f7fefb.1617024940.git.jani.nikula@intel.com

drm/displayid: add separate drm_displayid.c

We'll be adding more DisplayID specific functions going forward, so
start off by splitting out a few functions to a separate file.

We don't bother with exporting the functions; at least for now they
should be needed solely within drm.ko.

No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07942d5011891b8e8f77245c78b34f4af97a9315.1617024940.git.jani.nikula@intel.com

drm/edid: make a number of functions, parameters and variables const

If there's no need to change it, it should be const. There's more to be
done, but start off with changes that make follow-up work easier. No
functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/41722f92ef81cd6adf65f936fcc5301418e1f94b.1617024940.git.jani.nikula@intel.com

drm/mediatek: Add missing MODULE_DEVICE_TABLE()

This patch adds the missing MODULE_DEVICE_TABLE definitions on different
Mediatek drivers which generates correct modalias for automatic loading
when these drivers are compiled as an external module.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/hdcp: DP HDCP2.2 errata LC_Send_L_Prime=16

Fix LC_Send_L_Prime message timeout to 16 as documented
in DP HDCP 2.2 errata page 3.

https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324113012.7564-3-anshuman.gupta@intel.com

drm/i915/hdcp: Add DP HDCP2.2 timeout to read entire msg

As documented in HDCP 2.2 DP Errata spec transmitter should abort the
authentication protocol in case transmitter has not received the
entire {AKE_Send_Cert, AKE_Send_H_prime, AKE_Send_Paring_Info} msg
within {110,7,5} miliseconds.

Adding above msg timeout values and aborting the HDCP authentication
in case it timedout to read entire msg.

https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf

v2:
- Removed redundant variable msg_can_timedout. [Ankit]

Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324113012.7564-2-anshuman.gupta@intel.com

drm/i915/display: Configure HDMI2.1 Pcon for FRL only if Src-Ctl mode is available

Add the check if source control mode is supported by the
PCON, before starting configuring PCON for FRL training,
as per spec VESA DP2.0-HDMI2.1 PCON Draft-1 Sec-7.

v2: Added spec details for the change. (Uma)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323112422.1211-3-ankit.k.nautiyal@intel.com

drm/dp_helper: Define options for FRL training for HDMI2.1 PCON

Currently the FRL training mode (Concurrent, Sequential) and
training type (Normal, Extended) are not defined properly and
are passed as bool values in drm_helpers for pcon
configuration for FRL training.

This patch:
-Add register masks for Sequential and Normal FRL training options.
-Fixes the drm_helpers for FRL Training configuration to use the
 appropriate masks.
-Modifies the calls to the above drm_helpers in i915/intel_dp as per
 the above change.

v2: Re-used the register masks for these options, instead of enum. (Ville)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323112422.1211-2-ankit.k.nautiyal@intel.com

drm/i915/selftest: Add remap/rotate vma subtests when dst_stride!=width/height

Add selftests to test the POT stride padding functionality added in the
previous patch.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-25-imre.deak@intel.com

drm/i915: Add support for FBs requiring a POT stride alignment

An upcoming platform has a restriction that the FB stride must be
power-of-two aligned. To support framebuffer layouts that are not in
this layout add a logic that pads the tile rows to the POT aligned size.

The HW won't read the padding PTEs, so these don't have to point to an
allocated address, or even have their valid flag set. So use a NULL PTE
instead for instance the scratch page, which is simple and keeps the SG
table compact.

v2:
- Simplify plane_view_dst_stride(). (Ville)
- Pass pitch_tiles as unsigned int.
v3:
- Drop unintentional s/plane_state->rotation/plane_config->rotation/
  change.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-24-imre.deak@intel.com

drm/i915: s/stride/src_stride/ in the intel_remapped_plane_info struct

An upcoming patch adds a new dst_stride field to the
intel_remapped_plane_info struct, so for clarity rename the current
stride field to src_stride.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-23-imre.deak@intel.com

drm/i915/selftest: Unify use of intel_remapped_plane_info in igt_vma_rotate_remap()

Always use the modified copy of the intel_remapped_plane_info variables.
An upcoming patch updates the dst_stride field in these copies after
which we can't use the original versions.

v2: Init view in igt_vma_rotate_remap() when declaring it. (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-22-imre.deak@intel.com

drm/i915: Shrink the size of intel_remapped_plane_info struct

Save some place in the GTT VMAs by using a u16 instead of unsigned int
to store the view dimensions. The maximum FB stride is 256kB which is
4096 tiles in the worst case (yf-tiles), the maximum FB height is 16k
pixels, which is 16384 tiles in the worst case (linear 4x1 tiled FB).

v2:
- Fix worst case tile height formula in commit log. (Ville)
- Add an assign_chk_ovf helper to simplify the related assignments.
v3:
- Enclose params of the assign_chk_ovf macro in parentheses.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-21-imre.deak@intel.com