Jonathan Marek [Wed, 22 Dec 2021 00:37:46 +0000 (01:37 +0100)]
media: camss: Add initial support for VFE hardware version Titan 480
Add support for VFE found on SM8250 (Titan 480). This implementation is
based on the titan 170 implementation. It supports the normal and lite VFE,
and only supports the RDI0 capture path.
[bod: Updates hw_version callback]
[bod: Use static inline for macros reusing parameters checkpatch --strict]
Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Julian Grahsl <jgrahsl@snap.com> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jonathan Marek [Wed, 22 Dec 2021 00:37:45 +0000 (01:37 +0100)]
media: camss: vfe-170: fix "VFE halt timeout" error
This function waits for halt_complete but doesn't do anything to cause
it to complete, and always hits the "VFE halt timeout" error. Just delete
this code for now.
Fixes: 7585554bcb3b ("media: camss: Add support for VFE hardware version Titan 170") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Julian Grahsl <jgrahsl@snap.com> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jonathan Marek [Wed, 22 Dec 2021 00:37:41 +0000 (01:37 +0100)]
media: camss: csid-170: set the right HALT_CMD when disabled
Use the "HALT_CMD_RESUME_AT_FRAME_BOUNDARY" define instead of a "1" which
is otherwise confusing, and add a "HALT_CMD_HALT_AT_FRAME_BOUNDARY" which
is set when disabling.
Fixes: c61355bce6b8 ("media: camss: Add support for CSID hardware version Titan 170") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Julian Grahsl <jgrahsl@snap.com> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jonathan Marek [Wed, 22 Dec 2021 00:37:39 +0000 (01:37 +0100)]
media: camss: csid-170: remove stray comment
This is a leftover from my original patches, it doesn't serve any purpose.
(it was a reminder to figure out how downstream sets a particular field in
the register).
Fixes: c61355bce6b8 ("media: camss: Add support for CSID hardware version Titan 170") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Julian Grahsl <jgrahsl@snap.com> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jonathan Marek [Wed, 22 Dec 2021 00:37:38 +0000 (01:37 +0100)]
media: camss: csid-170: don't enable unused irqs
csid_isr() only checks for the reset irq, so enabling any other irqs
doesn't make sense. The "RDI irq" comment is also wrong, the register
should be CSID_CSI2_RDIN_IRQ_MASK. Without this fix there may be an
excessive amount of irqs.
Fixes: c61355bce6b8 ("media: camss: Add support for CSID hardware version Titan 170") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Julian Grahsl <jgrahsl@snap.com> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Tue, 14 Dec 2021 16:16:35 +0000 (17:16 +0100)]
media: staging: media: zoran: drop kernel log spam
Do not spam the kernel log with messages that result from incorrect
userspace input. Those should be either dropped completely (the error
code gives sufficient info) or changed to debug messages.
Hans Verkuil [Tue, 14 Dec 2021 16:16:33 +0000 (17:16 +0100)]
media: staging: media: zoran: fix various V4L2 compliance errors
This fixes several issues found with 'v4l2-compliance -s':
1) read()/write() is supported, but not reported in the capabilities
2) S_STD(G_STD()) failed: setting the same standard should just return 0.
3) G_PARM failed to set readbuffers.
4) different field values in the format vs. what v4l2_buffer reported.
5) zero the sequence number when starting streaming.
6) drop VB_USERPTR: makes no sense with dma_contig streaming.
Corentin Labbe [Tue, 14 Dec 2021 16:16:29 +0000 (17:16 +0100)]
media: staging: media: zoran: fix usage of vb2_dma_contig_set_max_seg_size
vb2_dma_contig_set_max_seg_size need to have a size in parameter and not
a DMA_BIT_MASK().
While fixing this issue, also fix error handling of all DMA size
setting.
Reported-by: kernel test robot <lkp@intel.com> Fixes: 1d19bbe2a9ed2 ("media: zoran: device support only 32bit DMA address") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Corentin Labbe [Tue, 14 Dec 2021 16:16:27 +0000 (17:16 +0100)]
media: staging: media: zoran: move config select on primary kconfig
Since all kconfigs for card selection are bool, this causes all selected
modules to be always built-in.
Prevent this by moving selects to the main tristate kconfig.
By doing this, remove also all "if MEDIA_SUBDRV_AUTOSELECT" which are
wrong, since zoran always need them to work.
Corentin Labbe [Tue, 14 Dec 2021 16:16:26 +0000 (17:16 +0100)]
media: staging: media: zoran: move videodev alloc
Move some code out of zr36057_init() and create new functions for handling
zr->video_dev. This permit to ease code reading and fix a zr->video_dev
memory leak.
Linus Torvalds [Sun, 23 Jan 2022 06:14:21 +0000 (08:14 +0200)]
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not
removing leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and
parse-event tests for it.
- No need to setup affinities when starting a workload or attaching to
a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf()
equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state
directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Remove redundant err variable
perf test: Add parse-events test for aliases with hyphens
perf test: Add pmu-events test for aliases with hyphens
perf parse-events: Support event alias in form foo-bar-baz
perf evsel: Override attr->sample_period for non-libpfm4 events
perf cpumap: Remove duplicate include in cpumap.h
perf cpumap: Migrate to libperf cpumap api
perf python: Fix cpu_map__item() building
perf script: Fix printing 'phys_addr' failure issue
tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
perf evlist: No need to setup affinities when disabling events for pid targets
perf evlist: No need to setup affinities when enabling events for pid targets
perf stat: No need to setup affinities when starting a workload
perf affinity: Allow passing a NULL arg to affinity__cleanup()
perf probe: Fix ppc64 'perf probe add events failed' case
Linus Torvalds [Sun, 23 Jan 2022 06:07:02 +0000 (08:07 +0200)]
Merge tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Fix s390 breakage from sorting mcount tables.
The latest merge of the tracing tree sorts the mcount table at build
time. But s390 appears to do things differently (like always) and
replaces the sorted table back to the original unsorted one. As the
ftrace algorithm depends on it being sorted, bad things happen when it
is not, and s390 experienced those bad things.
Add a new config to tell the boot if the mcount table is sorted or
not, and allow s390 to opt out of it"
* tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix assuming build time sort works for s390
ftrace: Fix assuming build time sort works for s390
To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.
Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.
Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/ Fixes: e099573c11e6 ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by: Sven Schnelle <svens@linux.ibm.com> Tested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Sun, 23 Jan 2022 04:32:29 +0000 (06:32 +0200)]
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage
- Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH
- Fix build errors in certs/Makefile
* tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty
certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI
Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"
usr/include/Makefile: add linux/nfc.h to the compile-test coverage
Linus Torvalds [Sun, 23 Jan 2022 04:20:44 +0000 (06:20 +0200)]
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
John Garry [Mon, 17 Jan 2022 15:10:14 +0000 (23:10 +0800)]
perf test: Add pmu-events test for aliases with hyphens
Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.
Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
John Garry [Mon, 17 Jan 2022 15:10:13 +0000 (23:10 +0800)]
perf parse-events: Support event alias in form foo-bar-baz
Event aliasing for events whose name in the form foo-bar-baz is not
supported, while foo-bar, foo_bar_baz, and other combinations are, i.e.
two hyphens are not supported.
The HiSilicon D06 platform has events in such form:
German Gomez [Tue, 18 Jan 2022 14:40:54 +0000 (14:40 +0000)]
perf evsel: Override attr->sample_period for non-libpfm4 events
A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.
Before said patch:
perf record -c 10000 -e arm_spe_0// -- sleep 1
Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.
This patch restores the previous behaviour for non-libpfm4 events.
Fixes: 5342d57de0f1 (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by: Chase Conklin <chase.conklin@arm.com> Signed-off-by: German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Sat, 22 Jan 2022 04:58:10 +0000 (20:58 -0800)]
perf cpumap: Migrate to libperf cpumap api
Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: André Almeida <andrealmeid@collabora.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Song Liu <song@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Sat, 22 Jan 2022 04:58:09 +0000 (20:58 -0800)]
perf python: Fix cpu_map__item() building
Value should be built as an integer.
Switch some uses of perf_cpu_map to use the library API.
Fixes: 407d3b0a52edc721 ("perf cpumap: Give CPUs their own type") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: André Almeida <andrealmeid@collabora.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Song Liu <song@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf script was failed to print the phys_addr for SPE profiling.
One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR
attribute set, perf script then exits with error.
Now referring to 'addr', use evsel__do_check_stype() to check the type.
Before:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field.
Reviewed-by: German Gomez <german.gomez@arm.com> Signed-off-by: Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masahiro Yamada [Thu, 20 Jan 2022 19:22:05 +0000 (04:22 +0900)]
certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty
Since e311d8525a75 ("certs: simplify $(srctree)/ handling and remove
config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty,
signing_key.x509 fails to build:
Dmitry V. Levin [Mon, 3 Jan 2022 01:24:02 +0000 (04:24 +0300)]
usr/include/Makefile: add linux/nfc.h to the compile-test coverage
As linux/nfc.h userspace compilation was finally fixed by commits 41272c9321ed ("nfc: uapi: use kernel size_t to fix user-space builds")
and 8a31d001152c ("uapi: fix linux/nfc.h userspace compilation errors"),
there is no need to keep the compile-test exception for it in
usr/include/Makefile.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Sat, 22 Jan 2022 09:28:23 +0000 (11:28 +0200)]
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:
"This is the post-linux-next queue. Material which was based on or
dependent upon material which was in -next.
69 patches.
Subsystems affected by this patch series: mm (migration and zsmalloc),
sysctl, proc, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits)
mm: hide the FRONTSWAP Kconfig symbol
frontswap: remove support for multiple ops
mm: mark swap_lock and swap_active_head static
frontswap: simplify frontswap_register_ops
frontswap: remove frontswap_test
mm: simplify try_to_unuse
frontswap: remove the frontswap exports
frontswap: simplify frontswap_init
frontswap: remove frontswap_curr_pages
frontswap: remove frontswap_shrink
frontswap: remove frontswap_tmem_exclusive_gets
frontswap: remove frontswap_writethrough
mm: remove cleancache
lib/stackdepot: always do filter_irq_stacks() in stack_depot_save()
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
proc: remove PDE_DATA() completely
fs: proc: store PDE()->data into inode->i_private
zsmalloc: replace get_cpu_var with local_lock
zsmalloc: replace per zpage lock with pool->migrate_lock
locking/rwlocks: introduce write_lock_nested
...
Linus Torvalds [Sat, 22 Jan 2022 09:12:26 +0000 (11:12 +0200)]
Merge tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- multichannel fixes, addressing additional reconnect and DFS scenarios
- reenabling fscache support (indexing rewrite, metadata caching e.g.)
- send additional version information during NTLMSSP negotiate to
improve debugging
- fix for a mount race
- DFS fixes
- fix for a memory leak for stable
* tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
smb3: send NTLMSSP version information
cifs: Support fscache indexing rewrite
cifs: cifs_ses_mark_for_reconnect should also update reconnect bits
cifs: update tcpStatus during negotiate and sess setup
cifs: make status checks in version independent callers
cifs: remove repeated state change in dfs tree connect
cifs: fix the cifs_reconnect path for DFS
cifs: remove unused variable ses_selected
cifs: protect all accesses to chan_* with chan_lock
cifs: fix the connection state transitions with multichannel
cifs: check reconnects for channels of active tcons too
smb3: add new defines from protocol specification
cifs: serialize all mount attempts
cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs
cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty
cifs: clean up an inconsistent indenting
cifs: free ntlmsspblob allocated in negotiate
Linus Torvalds [Sat, 22 Jan 2022 09:04:27 +0000 (11:04 +0200)]
Merge tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"One of the patches removes some dead code from xfs_ioctl32.h and the
other fixes broken workqueue flushing in the inode garbage collector.
- Minor cleanup of ioctl32 cruft
- Clean up open coded inodegc workqueue function calls"
* tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: flush inodegc workqueue tasks before cancel
xfs: remove unused xfs_ioctl32.h declarations
Linus Torvalds [Sat, 22 Jan 2022 08:59:32 +0000 (10:59 +0200)]
Merge tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull more fscache updates from David Howells:
"A set of fixes and minor updates for the fscache rewrite:
- Fix mishandling of volume collisions (the wait condition is
inverted and so it was only waiting if the volume collision was
already resolved).
- Fix miscalculation of whether there's space available in
cachefiles.
- Make sure a default cache name is set on a cache if the user hasn't
set one by the time they bind the cache.
- Adjust the way the backing inode is presented in tracepoints, add a
tracepoint for mkdir and trace directory lookup.
- Add a tracepoint for failure to set the active file mark.
- Add an explanation of the checks made on the backing filesystem.
- Check that the backing filesystem supports tmpfile.
- Document how the page-release cancellation of the read-skip
optimisation works.
And I've included a change for netfslib:
- Make ops->init_rreq() optional"
* tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Make ops->init_rreq() optional
fscache: Add a comment explaining how page-release optimisation works
cachefiles: Check that the backing filesystem supports tmpfiles
cachefiles: Explain checks in a comment
cachefiles: Trace active-mark failure
cachefiles: Make some tracepoint adjustments
cachefiles: set default tag name if it's unspecified
cachefiles: Calculate the blockshift in terms of bytes, not pages
fscache: Fix the volume collision wait condition
Linus Torvalds [Sat, 22 Jan 2022 08:43:07 +0000 (10:43 +0200)]
Merge tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache
Pull more folio updates from Matthew Wilcox:
"Three small folio patches.
One bug fix, one patch pulled forward from the patches destined for
5.18 and then a patch to make use of that functionality"
* tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache:
filemap: Use folio_put_refs() in filemap_free_folio()
mm: Add folio_put_refs()
pagevec: Initialise folio_batch->percpu_pvec_drained
Linus Torvalds [Sat, 22 Jan 2022 08:24:02 +0000 (10:24 +0200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: nsp_cs: Check of ioremap return value
scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()
scsi: ufs: Modify Tactive time setting conditions
scsi: efct: Remove useless DMA-32 fallback configuration
scsi: message: fusion: mptctl: Use dma_alloc_coherent()
scsi: message: fusion: mptsas: Use dma_alloc_coherent()
scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info()
scsi: message: fusion: mptbase: Use dma_alloc_coherent()
scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory()
scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API
scsi: megaraid: Avoid mismatched storage type sizes
scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
scsi: aic79xx: Remove redundant error variable
scsi: pm80xx: Port reset timeout error handling correction
scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
scsi: mpi3mr: Fix some spelling mistakes
scsi: mpt3sas: Update persistent trigger pages from sysfs interface
scsi: core: Fix scsi_mode_select() interface
scsi: aacraid: Fix spelling of "its"
scsi: qedf: Fix potential dereference of NULL pointer
Linus Torvalds [Sat, 22 Jan 2022 08:15:41 +0000 (10:15 +0200)]
Merge tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"Add device IDs for Raptor Lake to the int340x thermal control driver
(Srinivas Pandruvada)"
* tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Add Raptor Lake PCI device id
thermal: int340x: Support Raptor Lake
Linus Torvalds [Sat, 22 Jan 2022 08:09:51 +0000 (10:09 +0200)]
Merge tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull extra ACPI updates from Rafael Wysocki:
"These fix and clean up the ACPI CPPC driver on top of the recent
changes in it merged previously and add some new device IDs to the
ACPI DPTF driver.
Specifics:
- Fix a recently introduced endianness-related issue in the ACPI CPPC
library and clean it up on top of that (Rafael Wysocki)
- Add new device IDs for the Raptor Lake SoC to the ACPI DPTF driver
(Srinivas Pandruvada)"
* tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: DPTF: Support Raptor Lake
ACPI: CPPC: Drop redundant local variable from cpc_read()
ACPI: CPPC: Fix up I/O port access in cpc_read()
Linus Torvalds [Sat, 22 Jan 2022 07:52:17 +0000 (09:52 +0200)]
Merge tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes and cleanups from Rob Herring:
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
* tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: google,cros-ec: drop Enric Balletbo i Serra from maintainers
dt-bindings: display: bridge: drop Enric Balletbo i Serra from maintainers
of: Check 'of_node_reused' flag on of_match_device()
of: property: define of_property_read_u{8,16,32,64}_array() unconditionally
of: base: make small of_parse_phandle() variants static inline
dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example
dt-bindings: Fix array schemas encoded as matrices
dt-bindings: Drop unnecessary pinctrl properties
dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry
dt-bindings: mmc: arm,pl18x: Make each example a separate entry
dt-bindings: display: Add SPI peripheral schema to SPI based displays
scripts/dtc: dtx_diff: remove broken example from help text
dt-bindings: trivial-devices: fix double spaces in comments
dt-bindings: trivial-devices: fix swapped comments
dt-bindings: vendor-prefixes: add Wingtech
dt-bindings: vendor-prefixes: add Thundercomm
dt-bindings: vendor-prefixes: add Huawei
dt-bindings: vendor-prefixes: add F(x)tec
dt-bindings: vendor-prefixes: add 8devices
dt-bindings: power: reset: gpio-restart: Correct default priority
Linus Torvalds [Sat, 22 Jan 2022 07:40:01 +0000 (09:40 +0200)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
Linus Torvalds [Sat, 22 Jan 2022 07:37:31 +0000 (09:37 +0200)]
Merge tag 'for-5.17/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc architecture updates from Helge Deller:
"Fixes and enhancements:
- a memory leak fix in an error path in pdc_stable (Miaoqian Lin)
- two compiler warning fixes in the TOC code
- added autodetection for currently used console type (serial or
graphics) which inserts console=<type> if it's missing"
* tag 'for-5.17/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries
parisc: Fix missing prototype for 'toc_intr' warning in toc.c
parisc: Autodetect default output device and set console= kernel parameter
parisc: Use safer strscpy() in setup_cmdline()
parisc: Add visible flag to toc_stack variable
Linus Torvalds [Sat, 22 Jan 2022 07:34:49 +0000 (09:34 +0200)]
Merge tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for sv48 paging
- Hart ID mappings are now sparse, which enables more CPUs to come up
on systems with sparse hart IDs
- A handful of cleanups and fixes
* tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (27 commits)
RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT
RISC-V: Remove redundant err variable
riscv: dts: sifive unmatched: Add gpio poweroff
riscv: canaan: remove useless select of non-existing config SYSCON
RISC-V: Do not use cpumask data structure for hartid bitmap
RISC-V: Move spinwait booting method to its own config
RISC-V: Move the entire hart selection via lottery to SMP
RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method
RISC-V: Do not print the SBI version during HSM extension boot print
RISC-V: Avoid using per cpu array for ordered booting
riscv: default to CONFIG_RISCV_SBI_V01=n
riscv: fix boolconv.cocci warnings
riscv: Explicit comment about user virtual address space size
riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
riscv: Implement sv48 support
asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
riscv: Allow to dynamically define VA_BITS
riscv: Introduce functions to switch pt_ops
riscv: Split early kasan mapping to prepare sv48 introduction
riscv: Move KASAN mapping next to the kernel mapping
...
Linus Torvalds [Sat, 22 Jan 2022 07:02:57 +0000 (09:02 +0200)]
Merge tag 'docs-5.17-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"Three small documentation fixes"
* tag 'docs-5.17-2' of git://git.lwn.net/linux:
Documentation: fix firewire.rst ABI file path error
docs: ftrace: fix ambiguous sentence
docs: staging/tee.rst: fix two typos found while reading
Given that frontswap_register_ops must be called from built-in code,
there is no need to handle the case of swapfiles coming online before or
during it, so delete the code that deals with that case.
Link: https://lkml.kernel.org/r/20211224062246.1258487-11-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hugh Dickins <hughd@google.com> Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the removal of the Xen tmem driver in 2019, the cleancache hooks
are entirely unused, as are large parts of frontswap. This series
against linux-next (with the folio changes included) removes
cleancaches, and cuts down frontswap to the bits actually used by zswap.
This patch (of 13):
The cleancache subsystem is unused since the removal of Xen tmem driver
in commit 2bf6432e5c5e ("xen: remove tmem driver").
Marco Elver [Sat, 22 Jan 2022 06:14:31 +0000 (22:14 -0800)]
lib/stackdepot: always do filter_irq_stacks() in stack_depot_save()
The non-interrupt portion of interrupt stack traces before interrupt
entry is usually arbitrary. Therefore, saving stack traces of
interrupts (that include entries before interrupt entry) to stack depot
leads to unbounded stackdepot growth.
As such, use of filter_irq_stacks() is a requirement to ensure
stackdepot can efficiently deduplicate interrupt stacks.
Looking through all current users of stack_depot_save(), none (except
KASAN) pass the stack trace through filter_irq_stacks() before passing
it on to stack_depot_save().
Rather than adding filter_irq_stacks() to all current users of
stack_depot_save(), it became clear that stack_depot_save() should
simply do filter_irq_stacks().
Link: https://lkml.kernel.org/r/20211130095727.2378739-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Sat, 22 Jan 2022 06:14:27 +0000 (22:14 -0800)]
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be
allocated from memblock, even if stack depot ends up not actually used.
The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit.
This is fine for use-cases such as KASAN which is also a config option
and has overhead on its own. But it's an issue for functionality that
has to be actually enabled on boot (page_owner) or depends on hardware
(GPU drivers) and thus the memory might be wasted. This was raised as
an issue [1] when attempting to add stackdepot support for SLUB's debug
object tracking functionality. It's common to build kernels with
CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or
create only specific kmem caches with debugging for testing purposes.
It would thus be more efficient if stackdepot's table was allocated only
when actually going to be used. This patch thus makes the allocation
(and whole stack_depot_init() call) optional:
- Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current
well-defined point of allocation as part of mem_init(). Make
CONFIG_KASAN select this flag.
- Other users have to call stack_depot_init() as part of their own init
when it's determined that stack depot will actually be used. This may
depend on both config and runtime conditions. Convert current users
which are page_owner and several in the DRM subsystem. Same will be
done for SLUB later.
- Because the init might now be called after the boot-time memblock
allocation has given all memory to the buddy allocator, change
stack_depot_init() to allocate stack_table with kvmalloc() when
memblock is no longer available. Also handle allocation failure by
disabling stackdepot (could have theoretically happened even with
memblock allocation previously), and don't unnecessarily align the
memblock allocation to its own size anymore.
Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com>
From: Colin Ian King <colin.king@canonical.com>
Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message
There is a spelling mistake of the work allocation so fix this and
re-phrase the message to make it easier to read.
Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup
On FLATMEM, we call page_ext_init_flatmem_late() just before
kmem_cache_init() which means stack_depot_init() (called by page owner
init) will not recognize properly it should use kvmalloc() and not
memblock_alloc(). memblock_alloc() will also not issue a warning and
return a block memory that can be invalid and cause kernel page fault when
saving stacks, as reported by the kernel test robot [1].
Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so
that slab_is_available() is true during stack_depot_init(). SPARSEMEM
doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(),
but a different page_ext_init() even later in the boot process.
Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue.
While at it, also actually resolve a checkpatch warning in stack_depot_init()
from DRM CI, which was supposed to be in the original patch already.
Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3
Due to 447608b26674 ("drm/locking: add backtrace for locking contended
locks without backoff") landing recently to -next adding a new stack depot
user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate
call to stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4
Due to 0d849f8eeb07 ("lib: add reference counting tracking
infrastructure") landing recently to net-next adding a new stack depot
user in lib/ref_tracker.c we need to add an appropriate call to
stack_depot_init() there as well.
Muchun Song [Sat, 22 Jan 2022 06:14:20 +0000 (22:14 -0800)]
fs: proc: store PDE()->data into inode->i_private
PDE_DATA(inode) is introduced to get user private data and hide the
layout of struct proc_dir_entry. The inode->i_private is used to do the
same thing as well. Save a copy of user private data to inode->
i_private when proc inode is allocated. This means the user also can
get their private data by inode->i_private.
Introduce pde_data() to wrap inode->i_private so that we can remove
PDE_DATA() from fs/proc/generic.c and make PTE_DATE() as a wrapper of
pde_data(). It will be easier if we decide to remove PDE_DATE() in the
future.
Link: https://lkml.kernel.org/r/20211124081956.87711-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Galbraith [Sat, 22 Jan 2022 06:14:17 +0000 (22:14 -0800)]
zsmalloc: replace get_cpu_var with local_lock
The usage of get_cpu_var() in zs_map_object() is problematic because it
disables preemption and makes it impossible to acquire any sleeping lock
on PREEMPT_RT such as a spinlock_t.
Replace the get_cpu_var() usage with a local_lock_t which is embedded
struct mapping_area. It ensures that the access the struct is
synchronized against all users on the same CPU.
[minchan: remove the bit_spin_lock part and change the title]
Link: https://lkml.kernel.org/r/20211115185909.3949505-10-minchan@kernel.org Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Minchan Kim <minchan@kernel.org> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Sat, 22 Jan 2022 06:14:13 +0000 (22:14 -0800)]
zsmalloc: replace per zpage lock with pool->migrate_lock
The zsmalloc has used a bit for spin_lock in zpage handle to keep zpage
object alive during several operations. However, it causes the problem
for PREEMPT_RT as well as introducing too complicated.
This patch replaces the bit spin_lock with pool->migrate_lock rwlock.
It could make the code simple as well as zsmalloc work under PREEMPT_RT.
The drawback is the pool->migrate_lock is bigger granuarity than per
zpage lock so the contention would be higher than old when both
IO-related operations(i.e., zsmalloc, zsfree, zs_[map|unmap]) and
compaction(page/zpage migration) are going in parallel(*, the
migrate_lock is rwlock and IO related functions are all read side lock
so there is no contention). However, the write-side is fast
enough(dominant overhead is just page copy) so it wouldn't affect much.
If the lock granurity becomes more problem later, we could introduce
table locks based on handle as a hash value.
Link: https://lkml.kernel.org/r/20211115185909.3949505-9-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Sat, 22 Jan 2022 06:14:10 +0000 (22:14 -0800)]
locking/rwlocks: introduce write_lock_nested
In preparation for converting bit_spin_lock to rwlock in zsmalloc so
that multiple writers of zspages can run at the same time but those
zspages are supposed to be different zspage instance. Thus, it's not
deadlock. This patch adds write_lock_nested to support the case for
LOCKDEP.
[minchan@kernel.org: fix write_lock_nested for RT] Link: https://lkml.kernel.org/r/YZfrMTAXV56HFWJY@google.com
[bigeasy@linutronix.de: fixup write_lock_nested() implementation] Link: https://lkml.kernel.org/r/20211123170134.y6xb7pmpgdn4m3bn@linutronix.de Link: https://lkml.kernel.org/r/20211115185909.3949505-8-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Sat, 22 Jan 2022 06:14:07 +0000 (22:14 -0800)]
zsmalloc: remove zspage isolation for migration
zspage isolation for migration introduced additional exceptions to be
dealt with since the zspage was isolated from class list. The reason
why I isolated zspage from class list was to prevent race between
obj_malloc and page migration via allocating zpage from the zspage
further. However, it couldn't prevent object freeing from zspage so it
needed corner case handling.
This patch removes the whole mess. Now, we are fine since class->lock
and zspage->lock can prevent the race.
Link: https://lkml.kernel.org/r/20211115185909.3949505-7-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Sat, 22 Jan 2022 06:14:04 +0000 (22:14 -0800)]
zsmalloc: move huge compressed obj from page to zspage
The flag aims for zspage, not per page. Let's move it to zspage.
Link: https://lkml.kernel.org/r/20211115185909.3949505-6-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Sat, 22 Jan 2022 06:14:01 +0000 (22:14 -0800)]
zsmalloc: introduce obj_allocated
The usage pattern for obj_to_head is to check whether the zpage is
allocated or not. Thus, introduce obj_allocated.
Link: https://lkml.kernel.org/r/20211115185909.3949505-5-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Sat, 22 Jan 2022 06:13:57 +0000 (22:13 -0800)]
zsmalloc: decouple class actions from zspage works
This patch moves class stat update out of obj_malloc since it's not
related to zspage operation. This is a preparation to introduce new
lock scheme in next patch.
Link: https://lkml.kernel.org/r/20211115185909.3949505-4-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Sat, 22 Jan 2022 06:13:54 +0000 (22:13 -0800)]
zsmalloc: rename zs_stat_type to class_stat_type
The stat aims for class stat, not zspage so rename it.
Link: https://lkml.kernel.org/r/20211115185909.3949505-3-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Sat, 22 Jan 2022 06:13:51 +0000 (22:13 -0800)]
zsmalloc: introduce some helper functions
Patch series "zsmalloc: remove bit_spin_lock", v2.
zsmalloc uses bit_spin_lock to minimize space overhead since it's zpage
granularity lock. However, it causes zsmalloc non-working under
PREEMPT_RT as well as adding too much complication.
This patchset tries to replace the bit_spin_lock with per-pool rwlock.
It also removes unnecessary zspage isolation logic from class, which was
the other part too much complication added into zsmalloc.
Last patch changes the get_cpu_var to local_lock to make it work in
PREEMPT_RT.
This patch (of 9):
get_zspage_mapping returns fullness as well as class_idx. However, the
fullness is usually not used since it could be stale in some contexts.
It causes misleading as well as unnecessary instructions so this patch
introduces zspage_class.
obj_to_location also produces page and index but we don't need always
the index, either so this patch introduces obj_to_page.
Link: https://lkml.kernel.org/r/20211115185909.3949505-1-minchan@kernel.org Link: https://lkml.kernel.org/r/20211115185909.3949505-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20211221184501.574670-1-colin.i.king@gmail.com Fixes: c26da54dc8ca ("printk: move printk sysctl to printk/sysctl.c") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xiaoming Ni [Sat, 22 Jan 2022 06:13:41 +0000 (22:13 -0800)]
kprobe: move sysctl_kprobes_optimization to kprobes.c
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
Move sysctl_kprobes_optimization from kernel/sysctl.c to
kernel/kprobes.c. Use register_sysctl() to register the sysctl
interface.
[mcgrof@kernel.org: fix compile issue when CONFIG_OPTPROBES is disabled]
Link: https://lkml.kernel.org/r/20211129211943.640266-7-mcgrof@kernel.org Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Stephen Kitt <steve@sk2.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xiaoming Ni [Sat, 22 Jan 2022 06:13:34 +0000 (22:13 -0800)]
printk: fix build warning when CONFIG_PRINTK=n
build warning when CONFIG_PRINTK=n
kernel/printk/printk.c:175:5: warning: no previous prototype for
'devkmsg_sysctl_set_loglvl' [-Wmissing-prototypes]
devkmsg_sysctl_set_loglvl() is only used in sysctl.c when
CONFIG_PRINTK=y, but it participates in the build when CONFIG_PRINTK=n.
So add compile dependency CONFIG_PRINTK=y && CONFIG_SYSCTL=y to fix the
build warning.
Link: https://lkml.kernel.org/r/20211129211943.640266-5-mcgrof@kernel.org Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Stephen Kitt <steve@sk2.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luis Chamberlain [Sat, 22 Jan 2022 06:13:27 +0000 (22:13 -0800)]
fs: move namespace sysctls and declare fs base directory
This moves the namespace sysctls to its own file as part of the
kernel/sysctl.c spring cleaning
Since we have now removed all sysctls for "fs", we now have to declare
it on the filesystem code, we do that using the new helper, which
reduces boiler plate code.
We rename init_fs_shared_sysctls() to init_fs_sysctls() to reflect that
now fs/sysctls.c is taking on the burden of being the first to register
the base directory as well.
Lastly, since init code will load in the order in which we link it we
have to move the sysctl code to be linked in early, so that its early
init routine runs prior to other fs code. This way, other filesystem
code can register their own sysctls using the helpers after this:
* register_sysctl_init()
* register_sysctl()
Link: https://lkml.kernel.org/r/20211129211943.640266-3-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Stephen Kitt <steve@sk2.org> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luis Chamberlain [Sat, 22 Jan 2022 06:13:24 +0000 (22:13 -0800)]
sysctl: add and use base directory declarer and registration helper
Patch series "sysctl: add and use base directory declarer and
registration helper".
In this patch series we start addressing base directories, and so we
start with the "fs" sysctls. The end goal is we end up completely
moving all "fs" sysctl knobs out from kernel/sysctl.
This patch (of 6):
Add a set of helpers which can be used to declare and register base
directory sysctls on their own. We do this so we can later move each of
the base sysctl directories like "fs", "kernel", etc, to their own
respective files instead of shoving the declarations and registrations
all on kernel/sysctl.c. The lazy approach has caught up and with this,
we just end up extending the list of base directories / sysctls on one
file and this makes maintenance difficult due to merge conflicts from
many developers.
The declarations are used first by kernel/sysctl.c for registration its
own base which over time we'll try to clean up. It will be used in the
next patch to demonstrate how to cleanly deal with base sysctl
directories.
[mcgrof@kernel.org: null-terminate the ctl_table arrays] Link: https://lkml.kernel.org/r/YafJY3rXDYnjK/gs@bombadil.infradead.org Link: https://lkml.kernel.org/r/20211129211943.640266-1-mcgrof@kernel.org Link: https://lkml.kernel.org/r/20211129211943.640266-2-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Stephen Kitt <steve@sk2.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Antti Palosaari <crope@iki.fi> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Eric Biggers <ebiggers@google.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / kernel.git / log