Darrick J. Wong [Mon, 29 Oct 2018 23:47:48 +0000 (10:47 +1100)]
xfs: remove [cm]time update from reflink calls
Now that the vfs remap helper dirties the inode [cm]time for us, xfs no
longer needs to do that on its own.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:47:26 +0000 (10:47 +1100)]
xfs: remove xfs_reflink_remap_range
Since xfs_file_remap_range is a thin wrapper, move the contents of
xfs_reflink_remap_range into the shell. This cuts down on the vfs
calls being made from internal xfs code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that we've moved the partial EOF block checks to the VFS helpers, we
can remove the redundant functionality from XFS.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:47:06 +0000 (10:47 +1100)]
xfs: support returning partial reflink results
Back when the XFS reflink code only supported clone_file_range, we were
only able to return zero or negative error codes to userspace. However,
now that copy_file_range (which returns bytes copied) can use XFS'
clone_file_range, we have the opportunity to return partial results.
For example, if userspace sends a 1GB clone request and we run out of
space halfway through, we at least can tell userspace that we completed
512M of that request like a regular write.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:46:50 +0000 (10:46 +1100)]
xfs: clean up xfs_reflink_remap_blocks call site
Move the offset <-> blocks unit conversions into
xfs_reflink_remap_blocks to make the call site less ugly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:46:33 +0000 (10:46 +1100)]
xfs: fix pagecache truncation prior to reflink
Prior to remapping blocks, it is necessary to remove pages from the
destination file's page cache. Unfortunately, the truncation is not
aggressive enough -- if page size > block size, we'll end up zeroing
subpage blocks instead of removing them. So, round the start offset
down and the end offset up to page boundaries. We already wrote all
the dirty data so the larger range shouldn't be a problem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:45:48 +0000 (10:45 +1100)]
ocfs2: remove ocfs2_reflink_remap_range
Since ocfs2_remap_file_range is a thin shell around
ocfs2_remap_remap_range, move everything from the latter into the
former.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:44:45 +0000 (10:44 +1100)]
ocfs2: support partial clone range and dedupe range
Change the ocfs2 remap code to allow for returning partial results.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:43:16 +0000 (10:43 +1100)]
ocfs2: fix pagecache truncation prior to reflink
Prior to remapping blocks, it is necessary to remove pages from the
destination file's page cache. Unfortunately, the truncation is not
aggressive enough -- if page size > block size, we'll end up zeroing
subpage blocks instead of removing them. So, round the start offset
down and the end offset up to page boundaries. We already wrote all
the dirty data so the larger range should be fine.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:42:56 +0000 (10:42 +1100)]
ocfs2: truncate page cache for clone destination file before remapping
When cloning blocks into another file, truncate the page cache before we
start remapping blocks so that concurrent reads wait for us to finish.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:42:24 +0000 (10:42 +1100)]
vfs: clean up generic_remap_file_range_prep return value
Since the remap prep function can update the length of the remap
request, we can change this function to return the usual return status
instead of the odd behavior it has now.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:42:17 +0000 (10:42 +1100)]
vfs: hide file range comparison function
There are no callers of vfs_dedupe_file_range_compare, so we might as
well make it a static helper and remove the export.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:42:10 +0000 (10:42 +1100)]
vfs: enable remap callers that can handle short operations
Plumb in a remap flag that enables the filesystem remap handler to
shorten remapping requests for callers that can handle it. Now
copy_file_range can report partial success (in case we run up against
alignment problems, resource limits, etc.).
We also enable CAN_SHORTEN for fideduperange to maintain existing
userspace-visible behavior where xfs/btrfs shorten the dedupe range to
avoid stale post-eof data exposure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:42:03 +0000 (10:42 +1100)]
vfs: plumb remap flags through the vfs dedupe functions
Plumb a remap_flags argument through the vfs_dedupe_file_range_one
functions so that dedupe can take advantage of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:41:56 +0000 (10:41 +1100)]
vfs: plumb remap flags through the vfs clone functions
Plumb a remap_flags argument through the {do,vfs}_clone_file_range
functions so that clone can take advantage of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:41:49 +0000 (10:41 +1100)]
vfs: make remap_file_range functions take and return bytes completed
Change the remap_file_range functions to take a number of bytes to
operate upon and return the number of bytes they operated on. This is a
requirement for allowing fs implementations to return short clone/dedupe
results to the user, which will enable us to obey resource limits in a
graceful manner.
A subsequent patch will enable copy_file_range to signal to the
->clone_file_range implementation that it can handle a short length,
which will be returned in the function's return value. For now the
short return is not implemented anywhere so the behavior won't change --
either copy_file_range manages to clone the entire range or it tries an
alternative.
Neither clone ioctl can take advantage of this, alas.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:41:41 +0000 (10:41 +1100)]
vfs: remap helper should update destination inode metadata
Extend generic_remap_file_range_prep to handle inode metadata updates
when remapping into a file. If the operation can possibly alter the
file contents, we must update the ctime and mtime and remove security
privileges, just like we do for regular file writes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:41:34 +0000 (10:41 +1100)]
vfs: pass remap flags to generic_remap_checks
Pass the same remap flags to generic_remap_checks for consistency.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:41:28 +0000 (10:41 +1100)]
vfs: pass remap flags to generic_remap_file_range_prep
Plumb the remap flags through the filesystem from the vfs function
dispatcher all the way to the prep function to prepare for behavior
changes in subsequent patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:41:21 +0000 (10:41 +1100)]
vfs: combine the clone and dedupe into a single remap_file_range
Combine the clone_file_range and dedupe_file_range operations into a
single remap_file_range file operation dispatch since they're
fundamentally the same operation. The differences between the two can
be made in the prep functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:41:14 +0000 (10:41 +1100)]
vfs: rename clone_verify_area to remap_verify_area
Since we use clone_verify_area for both clone and dedupe range checks,
rename the function to make it clear that it's for both.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:41:08 +0000 (10:41 +1100)]
vfs: rename vfs_clone_file_prep to be more descriptive
The vfs_clone_file_prep is a generic function to be called by filesystem
implementations only. Rename the prefix to generic_ and make it more
clear that it applies to remap operations, not just clones.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:41:01 +0000 (10:41 +1100)]
vfs: skip zero-length dedupe requests
Don't bother calling the filesystem for a zero-length dedupe request;
we can return zero and exit.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:40:55 +0000 (10:40 +1100)]
vfs: avoid problematic remapping requests into partial EOF block
A deduplication data corruption is exposed in XFS and btrfs. It is
caused by extending the block match range to include the partial EOF
block, but then allowing unknown data beyond EOF to be considered a
"match" to data in the destination file because the comparison is only
made to the end of the source file. This corrupts the destination file
when the source extent is shared with it.
The VFS remapping prep functions only support whole block dedupe, but
we still need to appear to support whole file dedupe correctly. Hence
if the dedupe request includes the last block of the souce file, don't
include it in the actual dedupe operation. If the rest of the range
dedupes successfully, then reject the entire request. A subsequent
patch will enable us to shorten dedupe requests correctly.
When reflinking sub-file ranges, a data corruption can occur when the
source file range includes a partial EOF block. This shares the unknown
data beyond EOF into the second file at a position inside EOF, exposing
stale data in the second file.
If the reflink request includes the last block of the souce file, only
proceed with the reflink operation if it lands at or past the
destination file's current EOF. If it lands within the destination file
EOF, reject the entire request with -EINVAL and make the caller go the
hard way. A subsequent patch will enable us to shorten reflink requests
correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:40:46 +0000 (10:40 +1100)]
vfs: strengthen checking of file range inputs to generic_remap_checks
File range remapping, if allowed to run past the destination file's EOF,
is an optimization on a regular file write. Regular file writes that
extend the file length are subject to various constraints which are not
checked by range cloning.
This is a correctness problem because we're never allowed to touch
ranges that the page cache can't support (s_maxbytes); we're not
supposed to deal with large offsets (MAX_NON_LFS) if O_LARGEFILE isn't
set; and we must obey resource limits (RLIMIT_FSIZE).
Therefore, add these checks to the new generic_remap_checks function so
that we curtail unexpected behavior.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Mon, 29 Oct 2018 23:40:31 +0000 (10:40 +1100)]
vfs: check file ranges before cloning files
Move the file range checks from vfs_clone_file_prep into a separate
generic_remap_checks function so that all the checks are collected in a
central location. This forms the basis for adding more checks from
generic_write_checks that will make cloning's input checking more
consistent with write input checking.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
The contact point for the kernel's Code of Conduct should now be the
Code of Conduct Committee, not the full TAB. Change the email address
in the file to properly reflect this.
Acked-by: Chris Mason <clm@fb.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code of Conduct Interpretation: Put in the proper URL for the committee
There was a blank <URL> reference for how to find the Code of Conduct
Committee. Fix that up by pointing it to the correct kernel.org website
page location.
Acked-by: Chris Mason <clm@fb.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code of Conduct Interpretation: Add document explaining how the Code of Conduct is to be interpreted
The Contributor Covenant Code of Conduct is a general document meant to
provide a set of rules for almost any open source community. Every
open-source community is unique and the Linux kernel is no exception.
Because of this, this document describes how we in the Linux kernel
community will interpret it. We also do not expect this interpretation
to be static over time, and will adjust it as needed.
This document was created with the input and feedback of the TAB as well
as many current kernel maintainers.
Co-Developed-by: Thomas Gleixner <tglx@linutronix.de> Co-Developed-by: Olof Johansson <olof@lixom.net> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Borislav Petkov <bp@kernel.org> Acked-by: Chris Mason <clm@fb.com> Acked-by: Christian Lütke-Stetzkamp <christian@lkamp.de> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: David Sterba <kdave@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Dominik Brodowski <linux@dominikbrodowski.de> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Hans de Goede <j.w.r.degoede@gmail.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: James Smart <james.smart@broadcom.com> Acked-by: James Smart <jsmart2021@gmail.com> Acked-by: Jan Kara <jack@ucw.cz> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jens Axboe <axboe@kernel.dk> Acked-by: Jessica Yu <jeyu@kernel.org> Acked-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Jiri Kosina <jikos@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Joerg Roedel <joro@8bytes.org> Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lina Iyer <ilina@codeaurora.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Matias Bjørling <mb@lightnvm.io> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Mishi Choudhary <mishi@linux.com> Acked-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Acked-by: Oded Gabbay <oded.gabbay@gmail.com> Acked-by: Palmer Dabbelt <palmer@dabbelt.com> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Richard Weinberger <richard@nod.at> Acked-by: Rik van Riel <riel@surriel.com> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Sean Paul <sean@poorly.run> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Shuah Khan <shuah@kernel.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Takashi Iwai <tiwai@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Todd Poynor <toddpoynor@google.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Mason [Thu, 11 Oct 2018 16:09:31 +0000 (09:09 -0700)]
Code of conduct: Fix wording around maintainers enforcing the code of conduct
As it was originally worded, this paragraph requires maintainers to
enforce the code of conduct, or face potential repercussions. It sends
the wrong message, when really we just want maintainers to be part of
the solution and not violate the code of conduct themselves.
Removing it doesn't limit our ability to enforce the code of conduct,
and we can still encourage maintainers to help maintain high standards
for the level of discourse in their subsystem.
Signed-off-by: Chris Mason <clm@fb.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Amir Goldstein <amir73il@gmail.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Borislav Petkov <bp@kernel.org> Acked-by: Christian Lütke-Stetzkamp <christian@lkamp.de> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: David Sterba <kdave@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Dominik Brodowski <linux@dominikbrodowski.de> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Hans de Goede <j.w.r.degoede@gmail.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: James Smart <james.smart@broadcom.com> Acked-by: James Smart <jsmart2021@gmail.com> Acked-by: Jan Kara <jack@ucw.cz> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jens Axboe <axboe@kernel.dk> Acked-by: Jessica Yu <jeyu@kernel.org> Acked-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Jiri Kosina <jikos@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Joerg Roedel <joro@8bytes.org> Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lina Iyer <ilina@codeaurora.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Matias Bjørling <mb@lightnvm.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Acked-by: Oded Gabbay <oded.gabbay@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Palmer Dabbelt <palmer@dabbelt.com> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Richard Weinberger <richard@nod.at> Acked-by: Rik van Riel <riel@surriel.com> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Shuah Khan <shuah@kernel.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Takashi Iwai <tiwai@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tim Bird <tim.bird@sony.com> Acked-by: Todd Poynor <toddpoynor@google.com> Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Wolfram writes:
"i2c for 4.19
Another driver bugfix and MAINTAINERS addition from I2C."
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rcar: cleanup DMA for all kinds of failure
MAINTAINERS: Add entry for Broadcom STB I2C controller
1) Fix indexing of multi-pass dumps of ipv6 addresses, from David
Ahern.
2) Revert RCU locking change for bonding netpoll, causes worse
problems than it solves.
3) pskb_trim_rcsum_slow() doesn't handle odd trim offsets, resulting
in erroneous bad hw checksum triggers with CHECKSUM_COMPLETE
devices. From Dimitris Michailidis.
4) a revert to some neighbour code changes that adjust notifications
in a way that confuses some apps."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
Revert "neighbour: force neigh_invalidate when NUD_FAILED update is from admin"
net/ipv6: Fix index counter for unicast addresses in in6_dump_addrs
net: fix pskb_trim_rcsum_slow() with odd trim offset
Revert "bond: take rcu lock in netpoll_send_skb_on_dev"
This patch results in unnecessary netlink notification when one
tries to delete a neigh entry already in NUD_FAILED state. Found
this with a buggy app that tries to delete a NUD_FAILED entry
repeatedly. While the notification issue can be fixed with more
checks, adding more complexity here seems unnecessary. Also,
recent tests with other changes in the neighbour code have
shown that the INCOMPLETE and PROBE checks are good enough for
the original issue.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 19 Oct 2018 17:00:19 +0000 (10:00 -0700)]
net/ipv6: Fix index counter for unicast addresses in in6_dump_addrs
The loop wants to skip previously dumped addresses, so loops until
current index >= saved index. If the message fills it wants to save
the index for the next address to dump - ie., the one that did not
fit in the current message.
Currently, it is incrementing the index counter before comparing to the
saved index, and then the saved index is off by 1 - it assumes the
current address is going to fit in the message.
Change the index handling to increment only after a succesful dump.
Fixes: 6297547c1e2f4 ("ipv6: convert idev_list to list macros") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kamal Dasu [Wed, 17 Oct 2018 16:05:09 +0000 (12:05 -0400)]
MAINTAINERS: Add entry for Broadcom STB I2C controller
Add an entry for the Broadcom STB I2C controller in the MAINTAINERS file.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
[wsa: fixed sorting and a whitespace error] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
In hindsight I'd have left out the 3 comment fixes to make the pull
request look less scary at such a late point in the cycle. :-/"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/swiotlb: Enable swiotlb for > 4GiG RAM on 32-bit kernels
x86/fpu: Fix i486 + no387 boot crash by only saving FPU registers on context switch if there is an FPU
x86/fpu: Remove second definition of fpu in __fpu__restore_sig()
x86/entry/64: Further improve paranoid_entry comments
x86/entry/32: Clear the CS high bits
x86/boot: Add -Wno-pointer-sign to KBUILD_CFLAGS
x86/time: Correct the attribute on jiffies' definition
x86/entry: Add some paranoid entry/exit CR3 handling comments
x86/percpu: Fix this_cpu_read()
x86/tsc: Force inlining of cyc2ns bits
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Ingo writes:
"scheduler fixes:
Two fixes: a CFS-throttling bug fix, and an interactivity fix."
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix the min_vruntime update logic in dequeue_entity()
sched/fair: Fix throttle_list starvation with low CFS quota
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Ingo writes:
"perf fixes:
Misc perf tooling fixes."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Stop fallbacking to kallsyms for vdso symbols lookup
perf tools: Pass build flags to traceevent build
perf report: Don't crash on invalid inline debug information
perf cpu_map: Align cpu map synthesized events properly.
perf tools: Fix tracing_path_mount proper path
perf tools: Fix use of alternatives to find JDIR
perf evsel: Store ids for events with their own cpus perf_event__synthesize_event_update_cpus
perf vendor events intel: Fix wrong filter_band* values for uncore events
Revert "perf tools: Fix PMU term format max value calculation"
tools headers uapi: Sync kvm.h copy
tools arch uapi: Sync the x86 kvm.h copy
net: fix pskb_trim_rcsum_slow() with odd trim offset
We've been getting checksum errors involving small UDP packets, usually
59B packets with 1 extra non-zero padding byte. netdev_rx_csum_fault()
has been complaining that HW is providing bad checksums. Turns out the
problem is in pskb_trim_rcsum_slow(), introduced in commit e63754b567b2
("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends").
The source of the problem is that when the bytes we are trimming start
at an odd address, as in the case of the 1 padding byte above,
skb_checksum() returns a byte-swapped value. We cannot just combine this
with skb->csum using csum_sub(). We need to use csum_block_sub() here
that takes into account the parity of the start address and handles the
swapping.
Matches existing code in __skb_postpull_rcsum() and esp_remove_trailer().
Fixes: e63754b567b2 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Signed-off-by: Dimitris Michailidis <dmichail@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'drm-fixes-2018-10-20-1' of git://anongit.freedesktop.org/drm/drm
Dave writes:
"drm fixes for 4.19 final (part 2)
Looked like two stragglers snuck in, one very urgent the pageflipping
was missing a reference that could result in a GPF on non-i915
drivers, the other is an overflow in the sun4i dotclock calcs
resulting in a mode not getting set."
* tag 'drm-fixes-2018-10-20-1' of git://anongit.freedesktop.org/drm/drm:
drm/sun4i: Fix an ulong overflow in the dotclock driver
drm: Get ref on CRTC commit object when waiting for flip_done
Merge tag 'trace-v4.19-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Steven writes:
"tracing: A few small fixes to synthetic events
Masami found some issues with the creation of synthetic events. The
first two patches fix handling of unsigned type, and handling of a
space before an ending semi-colon.
The third patch adds a selftest to test the processing of synthetic
events."
* tag 'trace-v4.19-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests: ftrace: Add synthetic event syntax testcase
tracing: Fix synthetic event to allow semicolon at end
tracing: Fix synthetic event to accept unsigned modifier
Merge tag 'usb-4.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
I wrote:
"USB fixes for 4.19-final
Here are a small number of last-minute USB driver fixes
Included here are:
- spectre fix for usb storage gadgets
- xhci fixes
- cdc-acm fixes
- usbip fixes for reported problems
All of these have been in linux-next with no reported issues."
* tag 'usb-4.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: storage: Fix Spectre v1 vulnerability
USB: fix the usbfs flag sanitization for control transfers
usb: xhci: pci: Enable Intel USB role mux on Apollo Lake platforms
usb: roles: intel_xhci: Fix Unbalanced pm_runtime_enable
cdc-acm: correct counting of UART states in serial state notification
cdc-acm: do not reset notification buffer index upon urb unlinking
cdc-acm: fix race between reset and control messaging
usb: usbip: Fix BUG: KASAN: slab-out-of-bounds in vhci_hub_control()
selftests: usbip: add wait after attach and before checking port status
Merge tag 'for-linus-20181019' of git://git.kernel.dk/linux-block
Jens writes:
"Block fixes for 4.19-final
Two small fixes that should go into this release."
* tag 'for-linus-20181019' of git://git.kernel.dk/linux-block:
block: don't deal with discard limit in blkdev_issue_discard()
nvme: remove ns sibling before clearing path
Boris Brezillon [Thu, 18 Oct 2018 10:02:50 +0000 (12:02 +0200)]
drm/sun4i: Fix an ulong overflow in the dotclock driver
The calculated ideal rate can easily overflow an unsigned long, thus
making the best div selection buggy as soon as no ideal match is found
before the overflow occurs.
1) Fix gro_cells leak in xfrm layer, from Li RongQing.
2) BPF selftests change RLIMIT_MEMLOCK blindly, don't do that. From
Eric Dumazet.
3) AF_XDP calls synchronize_net() under RCU lock, fix from Björn
Töpel.
4) Out of bounds packet access in _decode_session6(), from Alexei
Starovoitov.
5) Several ethtool bugs, where we copy a struct into the kernel twice
and our validations of the values in the first copy can be
invalidated by the second copy due to asynchronous updates to the
memory by the user. From Wenwen Wang.
6) Missing netlink attribute validation in cls_api, from Davide
Caratti.
7) LLC SAP sockets neet to be SOCK_RCU FREE, from Cong Wang.
8) rxrpc operates on wrong kvec, from Yue Haibing.
9) A regression was introduced by the disassosciation of route
neighbour references in rt6_probe(), causing probe for
neighbourless routes to not be properly rate limited. Fix from
Sabrina Dubroca.
10) Unsafe RCU locking in tipc, from Tung Nguyen.
11) Use after free in inet6_mc_check(), from Eric Dumazet.
12) PMTU from icmp packets should update the SCTP transport pathmtu,
from Xin Long.
13) Missing peer put on error in rxrpc, from David Howells.
14) Fix pedit in nfp driver, from Pieter Jansen van Vuuren.
15) Fix overflowing shift statement in qla3xxx driver, from Nathan
Chancellor.
16) Fix Spectre v1 in ptp code, from Gustavo A. R. Silva.
17) udp6_unicast_rcv_skb() interprets udpv6_queue_rcv_skb() return
value in an inverted manner, fix from Paolo Abeni.
18) Fix missed unresolved entries in ipmr dumps, from Nikolay
Aleksandrov.
19) Fix NAPI handling under high load, we can completely miss events
when NAPI has to loop more than one time in a cycle. From Heiner
Kallweit."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
ip6_tunnel: Fix encapsulation layout
tipc: fix info leak from kernel tipc_event
net: socket: fix a missing-check bug
net: sched: Fix for duplicate class dump
r8169: fix NAPI handling under high load
net: ipmr: fix unresolved entry dumps
net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()
sctp: fix the data size calculation in sctp_data_size
virtio_net: avoid using netif_tx_disable() for serializing tx routine
udp6: fix encap return code for resubmitting
mlxsw: core: Fix use-after-free when flashing firmware during init
sctp: not free the new asoc when sctp_wait_for_connect returns err
sctp: fix race on sctp_id2asoc
r8169: re-enable MSI-X on RTL8168g
net: bpfilter: use get_pid_task instead of pid_task
ptp: fix Spectre v1 vulnerability
net: qla3xxx: Remove overflowing shift statement
geneve, vxlan: Don't set exceptions if skb->len < mtu
geneve, vxlan: Don't check skb_dst() twice
sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead
...
Merge tag 'drm-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm
Dave writes:
"drm fixes for 4.19 final
Just a last set of misc core fixes for final.
4 fixes, one use after free, one fb integration fix, one EDID fix,
and one laptop panel quirk,"
* tag 'drm-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm:
drm/edid: VSDB yCBCr420 Deep Color mode bit definitions
drm: fix use of freed memory in drm_mode_setcrtc
drm: fb-helper: Reject all pixel format changing requests
drm/edid: Add 6 bpc quirk for BOE panel in HP Pavilion 15-n233sl
Merge tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Doug writes:
"Really final for-rc pull request for 4.19
Ok, so last week I thought we had sent our final pull request for
4.19. Well, wouldn't ya know someone went and found a couple Spectre
v1 fixes were needed :-/. So, a couple *very* small specter patches
for this (hopefully) final -rc week."
* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Fix Spectre v1 vulnerability
IB/ucm: Fix Spectre v1 vulnerability
x86/swiotlb: Enable swiotlb for > 4GiG RAM on 32-bit kernels
We already build the swiotlb code for 32-bit kernels with PAE support,
but the code to actually use swiotlb has only been enabled for 64-bit
kernels for an unknown reason.
Before Linux v4.18 we paper over this fact because the networking code,
the SCSI layer and some random block drivers implemented their own
bounce buffering scheme.
[ mingo: Changelog fixes. ]
Fixes: c31eadb457af ("scsi: reduce use of block bounce buffers") Fixes: 167559bda58e ("net: remove the PCI_DMA_BUS_IS_PHYS check in illegal_highdma") Reported-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Matthew Whitehead <tedheadster@gmail.com> Cc: konrad.wilk@oracle.com Cc: iommu@lists.linux-foundation.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181014075208.2715-1-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Fri, 19 Oct 2018 03:51:55 +0000 (13:51 +1000)]
Merge tag 'drm-misc-fixes-2018-10-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v4.19:
- Fix use of freed memory in drm_mode_setcrtc.
- Reject pixel format changing requests in fb helper.
- Add 6 bpc quirk for HP Pavilion 15-n233sl
- Fix VSDB yCBCr420 Deep Color mode bit definitions
Stefano Brivio [Thu, 18 Oct 2018 19:25:07 +0000 (21:25 +0200)]
ip6_tunnel: Fix encapsulation layout
Commit b1a1b2bc49fd ("ip6_tun: Add infrastructure for doing
encapsulation") added the ip6_tnl_encap() call in ip6_tnl_xmit(), before
the call to ipv6_push_frag_opts() to append the IPv6 Tunnel Encapsulation
Limit option (option 4, RFC 2473, par. 5.1) to the outer IPv6 header.
As long as the option didn't actually end up in generated packets, this
wasn't an issue. Then commit 9e183c130cac ("ip6_tunnel: Fix missing tunnel
encapsulation limit option") fixed sending of this option, and the
resulting layout, e.g. for FoU, is:
Needless to say, FoU and GUE (at least) won't work over IPv6. The option
is appended by default, and I couldn't find a way to disable it with the
current iproute2.
With this, and with c7125f96fd7b ("udp6: fix encap return code for
resubmitting"), FoU and GUE work again over IPv6.
Fixes: b1a1b2bc49fd ("ip6_tun: Add infrastructure for doing encapsulation") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Thu, 18 Oct 2018 15:38:29 +0000 (17:38 +0200)]
tipc: fix info leak from kernel tipc_event
We initialize a struct tipc_event allocated on the kernel stack to
zero to avert info leak to user space.
Reported-by: syzbot+057458894bc8cada4dee@syzkaller.appspotmail.com Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wenwen Wang [Thu, 18 Oct 2018 14:36:46 +0000 (09:36 -0500)]
net: socket: fix a missing-check bug
In ethtool_ioctl(), the ioctl command 'ethcmd' is checked through a switch
statement to see whether it is necessary to pre-process the ethtool
structure, because, as mentioned in the comment, the structure
ethtool_rxnfc is defined with padding. If yes, a user-space buffer 'rxnfc'
is allocated through compat_alloc_user_space(). One thing to note here is
that, if 'ethcmd' is ETHTOOL_GRXCLSRLALL, the size of the buffer 'rxnfc' is
partially determined by 'rule_cnt', which is actually acquired from the
user-space buffer 'compat_rxnfc', i.e., 'compat_rxnfc->rule_cnt', through
get_user(). After 'rxnfc' is allocated, the data in the original user-space
buffer 'compat_rxnfc' is then copied to 'rxnfc' through copy_in_user(),
including the 'rule_cnt' field. However, after this copy, no check is
re-enforced on 'rxnfc->rule_cnt'. So it is possible that a malicious user
race to change the value in the 'compat_rxnfc->rule_cnt' between these two
copies. Through this way, the attacker can bypass the previous check on
'rule_cnt' and inject malicious data. This can cause undefined behavior of
the kernel and introduce potential security risk.
This patch avoids the above issue via copying the value acquired by
get_user() to 'rxnfc->rule_cn', if 'ethcmd' is ETHTOOL_GRXCLSRLALL.
Signed-off-by: Wenwen Wang <wang6495@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Sutter [Thu, 18 Oct 2018 08:34:26 +0000 (10:34 +0200)]
net: sched: Fix for duplicate class dump
When dumping classes by parent, kernel would return classes twice:
| # tc qdisc add dev lo root prio
| # tc class show dev lo
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
| # tc class show dev lo parent 8001:
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
This comes from qdisc_match_from_root() potentially returning the root
qdisc itself if its handle matched. Though in that case, root's classes
were already dumped a few lines above.
Fixes: 3db3a7a785bb1 ("net: sched: optimize class dumps") Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 18 Oct 2018 17:56:01 +0000 (19:56 +0200)]
r8169: fix NAPI handling under high load
rtl_rx() and rtl_tx() are called only if the respective bits are set
in the interrupt status register. Under high load NAPI may not be
able to process all data (work_done == budget) and it will schedule
subsequent calls to the poll callback.
rtl_ack_events() however resets the bits in the interrupt status
register, therefore subsequent calls to rtl8169_poll() won't call
rtl_rx() and rtl_tx() - chip interrupts are still disabled.
Fix this by calling rtl_rx() and rtl_tx() independent of the bits
set in the interrupt status register. Both functions will detect
if there's nothing to do for them.
Fixes: 5f5a0514c089 ("r8169: remove work from irq handler.") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Leo Li [Mon, 15 Oct 2018 13:46:40 +0000 (09:46 -0400)]
drm: Get ref on CRTC commit object when waiting for flip_done
This fixes a general protection fault, caused by accessing the contents
of a flip_done completion object that has already been freed. It occurs
due to the preemption of a non-blocking commit worker thread W by
another commit thread X. X continues to clear its atomic state at the
end, destroying the CRTC commit object that W still needs. Switching
back to W and accessing the commit objects then leads to bad results.
Worker W becomes preemptable when waiting for flip_done to complete. At
this point, a frequently occurring commit thread X can take over. Here's
an example where W is a worker thread that flips on both CRTCs, and X
does a legacy cursor update on both CRTCs:
...
1. W does flip work
2. W runs commit_hw_done()
3. W waits for flip_done on CRTC 1
4. > flip_done for CRTC 1 completes
5. W finishes waiting for CRTC 1
6. W waits for flip_done on CRTC 2
7. > Preempted by X
8. > flip_done for CRTC 2 completes
9. X atomic_check: hw_done and flip_done are complete on all CRTCs
10. X updates cursor on both CRTCs
11. X destroys atomic state
12. X done
13. > Switch back to W
14. W waits for flip_done on CRTC 2
15. W raises general protection fault
Note that i915 has this issue masked, since hw_done is signaled after
waiting for flip_done. Doing so will block the cursor update from
happening until hw_done is signaled, preventing the cursor commit from
destroying the state.
v2: The reference on the commit object needs to be obtained before
hw_done() is signaled, since that's the point where another commit
is allowed to modify the state. Assuming that the
new_crtc_state->commit object still exists within flip_done() is
incorrect.
Fix by getting a reference in setup_commit(), and releasing it
during default_clear().
Ming Lei [Fri, 12 Oct 2018 07:53:10 +0000 (15:53 +0800)]
block: don't deal with discard limit in blkdev_issue_discard()
blk_queue_split() does respect this limit via bio splitting, so no
need to do that in blkdev_issue_discard(), then we can align to
normal bio submit(bio_add_page() & submit_bio()).
More importantly, this patch fixes one issue introduced in d10bef5a91581bc
("block: re-add discard_granularity and alignment checks"), in which
zero discard bio may be generated in case of zero alignment.
Fixes: d10bef5a91581bcff7 ("block: re-add discard_granularity and alignment checks") Cc: stable@vger.kernel.org Cc: Ming Lin <ming.l@ssi.samsung.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Tested-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Eric Sandeen [Wed, 17 Oct 2018 14:23:59 +0000 (15:23 +0100)]
fscache: Fix out of bound read in long cookie keys
fscache_set_key() can incur an out-of-bounds read, reported by KASAN:
BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x5b3/0x680 [fscache]
Read of size 4 at addr ffff88084ff056d4 by task mount.nfs/32615
and also reported by syzbot at https://lkml.org/lkml/2018/7/8/236
BUG: KASAN: slab-out-of-bounds in fscache_set_key fs/fscache/cookie.c:120 [inline]
BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x7a9/0x880 fs/fscache/cookie.c:171
Read of size 4 at addr ffff8801d3cc8bb4 by task syz-executor907/4466
This happens for any index_key_len which is not divisible by 4 and is
larger than the size of the inline key, because the code allocates exactly
index_key_len for the key buffer, but the hashing loop is stepping through
it 4 bytes (u32) at a time in the buf[] array.
Fix this by calculating how many u32 buffers we'll need by using
DIV_ROUND_UP, and then using kcalloc() to allocate a precleared allocation
buffer to hold the index_key, then using that same count as the hashing
index limit.
Fixes: aac5768a9525 ("fscache: Maintain a catalogue of allocated cookies") Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Wed, 17 Oct 2018 14:23:45 +0000 (15:23 +0100)]
fscache: Fix incomplete initialisation of inline key space
The inline key in struct rxrpc_cookie is insufficiently initialized,
zeroing only 3 of the 4 slots, therefore an index_key_len between 13 and 15
bytes will end up hashing uninitialized memory because the memcpy only
partially fills the last buf[] element.
Fix this by clearing fscache_cookie objects on allocation rather than using
the slab constructor to initialise them. We're going to pretty much fill
in the entire struct anyway, so bringing it into our dcache writably
shouldn't incur much overhead.
This removes the need to do clearance in fscache_set_key() (where we aren't
doing it correctly anyway).
Also, we don't need to set cookie->key_len in fscache_set_key() as we
already did it in the only caller, so remove that.
Fixes: aac5768a9525 ("fscache: Maintain a catalogue of allocated cookies") Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com Reported-by: Eric Sandeen <sandeen@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Wed, 17 Oct 2018 14:23:26 +0000 (15:23 +0100)]
cachefiles: fix the race between cachefiles_bury_object() and rmdir(2)
the victim might've been rmdir'ed just before the lock_rename();
unlike the normal callers, we do not look the source up after the
parents are locked - we know it beforehand and just recheck that it's
still the child of what used to be its parent. Unfortunately,
the check is too weak - we don't spot a dead directory since its
->d_parent is unchanged, dentry is positive, etc. So we sail all
the way to ->rename(), with hosting filesystems _not_ expecting
to be asked renaming an rmdir'ed subdirectory.
The fix is easy, fortunately - the lock on parent is sufficient for
making IS_DEADDIR() on child safe.
Cc: stable@vger.kernel.org Fixes: 5f60092fcbc4 (CacheFiles: A cache that backs onto a mounted filesystem) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Fri, 12 Oct 2018 22:22:59 +0000 (15:22 -0700)]
mremap: properly flush TLB before releasing the page
Jann Horn points out that our TLB flushing was subtly wrong for the
mremap() case. What makes mremap() special is that we don't follow the
usual "add page to list of pages to be freed, then flush tlb, and then
free pages". No, mremap() obviously just _moves_ the page from one page
table location to another.
That matters, because mremap() thus doesn't directly control the
lifetime of the moved page with a freelist: instead, the lifetime of the
page is controlled by the page table locking, that serializes access to
the entry.
As a result, we need to flush the TLB not just before releasing the lock
for the source location (to avoid any concurrent accesses to the entry),
but also before we release the destination page table lock (to avoid the
TLB being flushed after somebody else has already done something to that
page).
This also makes the whole "need_flush" logic unnecessary, since we now
always end up flushing the TLB for every valid entry.
Using non-GPL licenses for our documentation is rather problematic,
as it can directly include other files, which generally are GPLv2
licensed and thus not compatible.
Remove this license now that the only user (idr.rst) is gone to avoid
people semi-accidentally using it again.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ingo Molnar [Thu, 18 Oct 2018 05:41:29 +0000 (07:41 +0200)]
Merge tag 'perf-urgent-for-mingo-4.19-20181017' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Stop falling back to kallsyms for vDSO symbols lookup, this wasn't
being really used and is not valid in arches such as Sparc, where
user and kernel space don't share the address space, relying only on
cpumode to figure out what DSOs to lookup (Arnaldo Carvalho de Melo)
- Align CPU map synthesized events properly, fixing SIGBUS in
CPUs like Sparc (David Miller)
- Fix use of alternatives to find JDIR (Jarod Wilson)
- Store IDs for events with their own CPUs when synthesizing user
level event details (scale, unit, etc) events, fixing a crash
when recording a PMU event with a cpumask defined (Jiri Olsa)
If the skb space ends in an unresolved entry while dumping we'll miss
some unresolved entries. The reason is due to zeroing the entry counter
between dumping resolved and unresolved mfc entries. We should just
keep counting until the whole table is dumped and zero when we move to
the next as we have a separate table counter.
Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: e7dce7c1df15 ("ipmr: improve hash scalability") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gregory CLEMENT [Wed, 17 Oct 2018 15:26:35 +0000 (17:26 +0200)]
net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()
The ocelot_vlant_wait_for_completion() function is very similar to the
ocelot_mact_wait_for_completion(). It seemed to have be copied but the
comment was not updated, so let's fix it.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 17 Oct 2018 13:11:27 +0000 (21:11 +0800)]
sctp: fix the data size calculation in sctp_data_size
sctp data size should be calculated by subtracting data chunk header's
length from chunk_hdr->length, not just data header.
Fixes: f1ab92932f1f ("sctp: implement assign_number for sctp_stream_interleave") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ake Koomsin [Wed, 17 Oct 2018 10:44:12 +0000 (19:44 +0900)]
virtio_net: avoid using netif_tx_disable() for serializing tx routine
Commit 9332bc35703a ("virtio-net: serialize tx routine during reset")
introduces netif_tx_disable() after netif_device_detach() in order to
avoid use-after-free of tx queues. However, there are two issues.
1) Its operation is redundant with netif_device_detach() in case the
interface is running.
2) In case of the interface is not running before suspending and
resuming, the tx does not get resumed by netif_device_attach().
This results in losing network connectivity.
It is better to use netif_tx_lock_bh()/netif_tx_unlock_bh() instead for
serializing tx routine during reset. This also preserves the symmetry
of netif_device_detach() and netif_device_attach().
Fixes commit 9332bc35703a ("virtio-net: serialize tx routine during reset") Signed-off-by: Ake Koomsin <ake@igel.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'trace-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Steven writes:
"tracing: Two fixes for 4.19
This fixes two bugs:
- Fix size mismatch of tracepoint array
- Have preemptirq test module use same clock source of the selftest"
* tag 'trace-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Use trace_clock_local() for looping in preemptirq_delay_test.c
tracepoint: Fix tracepoint array element size mismatch
Paolo Abeni [Wed, 17 Oct 2018 09:44:04 +0000 (11:44 +0200)]
udp6: fix encap return code for resubmitting
The commit d55e37201576 ("udp6: add missing checks on edumux packet
processing") used the same return code convention of the ipv4 counterpart,
but ipv6 uses the opposite one: positive values means resubmit.
This change addresses the issue, using positive return value for
resubmitting. Also update the related comment, which was broken, too.
Fixes: d55e37201576 ("udp6: add missing checks on edumux packet processing") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 17 Oct 2018 08:05:45 +0000 (08:05 +0000)]
mlxsw: core: Fix use-after-free when flashing firmware during init
When the switch driver (e.g., mlxsw_spectrum) determines it needs to
flash a new firmware version it resets the ASIC after the flashing
process. The bus driver (e.g., mlxsw_pci) then registers itself again
with mlxsw_core which means (among other things) that the device
registers itself again with the hwmon subsystem again.
Since the device was registered with the hwmon subsystem using
devm_hwmon_device_register_with_groups(), then the old hwmon device
(registered before the flashing) was never unregistered and was
referencing stale data, resulting in a use-after free.
Fix by removing reliance on device managed APIs in mlxsw_hwmon_init().
Fixes: 587cea44e003 ("mlxsw: spectrum: Reset FW after flash") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Tested-by: Alexander Petrovskiy <alexpe@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 16 Oct 2018 19:06:12 +0000 (03:06 +0800)]
sctp: not free the new asoc when sctp_wait_for_connect returns err
When sctp_wait_for_connect is called to wait for connect ready
for sp->strm_interleave in sctp_sendmsg_to_asoc, a panic could
be triggered if cpu is scheduled out and the new asoc is freed
elsewhere, as it will return err and later the asoc gets freed
again in sctp_sendmsg.
This is a similar issue with the one fixed in Commit 648294f38e80
("sctp: do not free asoc when it is already dead in sctp_sendmsg").
But this one can't be fixed by returning -ESRCH for the dead asoc
in sctp_wait_for_connect, as it will break sctp_connect's return
value to users.
This patch is to simply set err to -ESRCH before it returns to
sctp_sendmsg when any err is returned by sctp_wait_for_connect
for sp->strm_interleave, so that no asoc would be freed due to
this.
When users see this error, they will know the packet hasn't been
sent. And it also makes sense to not free asoc because waiting
connect fails, like the second call for sctp_wait_for_connect in
sctp_sendmsg_to_asoc.
Fixes: f1ab92932f1f ("sctp: implement assign_number for sctp_stream_interleave") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported an use-after-free involving sctp_id2asoc. Dmitry Vyukov
helped to root cause it and it is because of reading the asoc after it
was freed:
CPU 1 CPU 2
(working on socket 1) (working on socket 2)
sctp_association_destroy
sctp_id2asoc
spin lock
grab the asoc from idr
spin unlock
spin lock
remove asoc from idr
spin unlock
free(asoc)
if asoc->base.sk != sk ... [*]
This can only be hit if trying to fetch asocs from different sockets. As
we have a single IDR for all asocs, in all SCTP sockets, their id is
unique on the system. An application can try to send stuff on an id
that matches on another socket, and the if in [*] will protect from such
usage. But it didn't consider that as that asoc may belong to another
socket, it may be freed in parallel (read: under another socket lock).
We fix it by moving the checks in [*] into the protected region. This
fixes it because the asoc cannot be freed while the lock is held.
Reported-by: syzbot+c7dd55d7aec49d48e49a@syzkaller.appspotmail.com Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 16 Oct 2018 17:35:17 +0000 (19:35 +0200)]
r8169: re-enable MSI-X on RTL8168g
Similar to 5e144cee3505 ("r8169: Enable MSI-X on RTL8106e") after c4cfa3b1e01a ("PCI: Reprogram bridge prefetch registers on resume")
we can safely assume that this also fixes the root cause of
the issue worked around by 0db8118168ca ("r8169: don't use MSI-X on
RTL8168g"). So let's revert it.
Fixes: 0db8118168ca ("r8169: don't use MSI-X on RTL8168g") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Tue, 16 Oct 2018 15:35:10 +0000 (00:35 +0900)]
net: bpfilter: use get_pid_task instead of pid_task
pid_task() dereferences rcu protected tasks array.
But there is no rcu_read_lock() in shutdown_umh() routine so that
rcu_read_lock() is needed.
get_pid_task() is wrapper function of pid_task. it holds rcu_read_lock()
then calls pid_task(). if task isn't NULL, it increases reference count
of task.
test commands:
%modprobe bpfilter
%modprobe -rv bpfilter
splat looks like:
[15102.030932] =============================
[15102.030957] WARNING: suspicious RCU usage
[15102.030985] 4.19.0-rc7+ #21 Not tainted
[15102.031010] -----------------------------
[15102.031038] kernel/pid.c:330 suspicious rcu_dereference_check() usage!
[15102.031063]
other info that might help us debug this:
[15102.031332]
rcu_scheduler_active = 2, debug_locks = 1
[15102.031363] 1 lock held by modprobe/1570:
[15102.031389] #0: 00000000580ef2b0 (bpfilter_lock){+.+.}, at: stop_umh+0x13/0x52 [bpfilter]
[15102.031552]
stack backtrace:
[15102.031583] CPU: 1 PID: 1570 Comm: modprobe Not tainted 4.19.0-rc7+ #21
[15102.031607] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[15102.031628] Call Trace:
[15102.031676] dump_stack+0xc9/0x16b
[15102.031723] ? show_regs_print_info+0x5/0x5
[15102.031801] ? lockdep_rcu_suspicious+0x117/0x160
[15102.031855] pid_task+0x134/0x160
[15102.031900] ? find_vpid+0xf0/0xf0
[15102.032017] shutdown_umh.constprop.1+0x1e/0x53 [bpfilter]
[15102.032055] stop_umh+0x46/0x52 [bpfilter]
[15102.032092] __x64_sys_delete_module+0x47e/0x570
[ ... ]
Fixes: 442032511c36 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Fix this by sanitizing pin_index before using it to index
ops->pin_config, and before passing it as an argument to
function ptp_set_pinfunc(), in which it is used to index
info->pin_config.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift
result (0xF00000000) requires 37 bits to represent, but 'int' only has
32 bits [-Wshift-overflow]
((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
~~~~~~~~~~~~~~ ^ ~~
1 warning generated.
The warning is certainly accurate since ISP_NVRAM_MASK is defined as
(0x000F << 16) which is then shifted by 16, resulting in 64424509440,
well above UINT_MAX.
Given that this is the only location in this driver where ISP_NVRAM_MASK
is shifted again, it seems likely that ISP_NVRAM_MASK was originally
defined without a shift and during the move of the shift to the
definition, this statement wasn't properly removed (since ISP_NVRAM_MASK
is used in the statenent right above this). Only the maintainers can
confirm this since this statment has been here since the driver was
first added to the kernel.
Stefano Brivio [Fri, 12 Oct 2018 21:53:58 +0000 (23:53 +0200)]
geneve, vxlan: Don't check skb_dst() twice
Commit 8cbdb57453a0 ("net: don't call update_pmtu unconditionally") avoids
that we try updating PMTU for a non-existent destination, but didn't clean
up cases where the check was already explicit. Drop those redundant checks.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
tracing: Use trace_clock_local() for looping in preemptirq_delay_test.c
The preemptirq_delay_test module is used for the ftrace selftest code that
tests the latency tracers. The problem is that it uses ktime for the delay
loop, and then checks the tracer to see if the delay loop is caught, but the
tracer uses trace_clock_local() which uses various different other clocks to
measure the latency. As ktime uses the clock cycles, and the code then
converts that to nanoseconds, it causes rounding errors, and the preemptirq
latency tests are failing due to being off by 1 (it expects to see a delay
of 500000 us, but the delay is only 499999 us). This is happening due to a
rounding error in the ktime (which is totally legit). The purpose of the
test is to see if it can catch the delay, not to test the accuracy between
trace_clock_local() and ktime_get(). Best to use apples to apples, and have
the delay loop use the same clock as the latency tracer does.
Cc: stable@vger.kernel.org Fixes: 360b77af3712d ("lib: Add module for testing preemptoff/irqsoff latency tracers") Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
tracepoint: Fix tracepoint array element size mismatch
commit 3b386c0ac429 ("kernel: tracepoints: add support for relative
references") changes the layout of the __tracepoint_ptrs section on
architectures supporting relative references. However, it does so
without turning struct tracepoint * const into const int elsewhere in
the tracepoint code, which has the following side-effect:
Setting mod->num_tracepoints is done in by module.c:
Basically, since sizeof(*mod->tracepoints_ptrs) is a pointer size
(rather than sizeof(int)), num_tracepoints is erroneously set to half the
size it should be on 64-bit arch. So a module with an odd number of
tracepoints misses the last tracepoint due to effect of integer
division.
the expression (mod->tracepoints_ptrs + mod->num_tracepoints) actually
evaluates to something within the bounds of the array, but miss the
last tracepoint if the number of tracepoints is odd on 64-bit arch.
Fix this by introducing a new typedef: tracepoint_ptr_t, which
is either "const int" on architectures that have PREL32 relocations,
or "struct tracepoint * const" on architectures that does not have
this feature.
Also provide a new tracepoint_ptr_defer() static inline to
encapsulate deferencing this type rather than duplicate code and
ugly idefs within the for_each_tracepoint_range() implementation.
This issue appears in 4.19-rc kernels, and should ideally be fixed
before the end of the rc cycle.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jessica Yu <jeyu@kernel.org> Link: http://lkml.kernel.org/r/20181013191050.22389-1-mathieu.desnoyers@efficios.com Link: http://lkml.kernel.org/r/20180704083651.24360-7-ard.biesheuvel@linaro.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix this by sanitizing num before using it to index
fsg_opts->common->luns
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].