Update include/xen/interface/io/ring.h to its newest version.
Switch the two improper use cases of RING_HAS_UNCONSUMED_RESPONSES() to
XEN_RING_NR_UNCONSUMED_RESPONSES() in order to avoid the nasty
XEN_RING_HAS_UNCONSUMED_IS_BOOL #define.
xen/scsifront: harden driver against malicious backend
Instead of relying on a well behaved PV scsi backend verify all meta
data received from the backend and avoid multiple reads of the same
data from the shared ring page.
In case any illegal data from the backend is detected switch the
PV device to a new "error" state and deactivate it for further use.
Use the "lateeoi" variant for the event channel in order to avoid
event storms blocking the guest.
Linus Torvalds [Sun, 15 May 2022 15:08:51 +0000 (08:08 -0700)]
Merge tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is one fix, and three documentation updates for 5.18-rc7.
The fix is for the firmware loader which resolves a long-reported
problem where the credentials of the firmware loader could be set to a
userspace process without enough permissions to actually load the
firmware image. Many Android vendors have been reporting this for
quite some time.
The documentation updates are for the embargoed-hardware-issues.rst
file to add a new entry, change an existing one, and sort the list to
make changes easier in the future.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation/process: Update ARM contact for embargoed hardware issues
Documentation/process: Add embargoed HW contact for Ampere Computing
Documentation/process: Make groups alphabetical and use tabs consistently
firmware_loader: use kernel credentials when reading firmware
Linus Torvalds [Sun, 15 May 2022 15:07:07 +0000 (08:07 -0700)]
Merge tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two small driver fixes for 5.18-rc7 that resolve reported
problems:
- slimbus driver irq bugfix
- interconnect sync state bugfix
Both of these have been in linux-next with no reported problems"
* tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom: Fix IRQ check in qcom_slim_probe
interconnect: Restore sync state by ignoring ipa-virt in provider count
Linus Torvalds [Sun, 15 May 2022 15:05:04 +0000 (08:05 -0700)]
Merge tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty n_gsm and serial driver fixes for 5.18-rc7
that resolve reported problems. They include:
- n_gsm fixes for reported issues
- 8250_mtk driver fixes for some platforms
- fsl_lpuart driver fix for reported problem.
- digicolor driver fix for reported problem.
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fsl_lpuart: Don't enable interrupts too early
tty: n_gsm: fix invalid gsmtty_write_room() result
tty: n_gsm: fix mux activation issues in gsm_config()
tty: n_gsm: fix buffer over-read in gsm_dlci_data()
serial: 8250_mtk: Fix register address for XON/XOFF character
serial: 8250_mtk: Make sure to select the right FEATURE_SEL
serial: 8250_mtk: Fix UART_EFR register address
tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
Linus Torvalds [Sun, 15 May 2022 13:42:40 +0000 (06:42 -0700)]
Merge tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the handling of unpopulated sub-pmd spaces.
The copy & pasta from the corresponding s390 code screwed up the
address calculation for marking the sub-pmd ranges via memset by
omitting the ALIGN_DOWN() to calculate the proper start address.
It's a mystery why this code is not generic and shared because there
is nothing architecture specific in there, but that's too intrusive
for a backportable fix"
* tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix marking of unused sub-pmd ranges
Linus Torvalds [Sun, 15 May 2022 13:40:11 +0000 (06:40 -0700)]
Merge tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"The recent expansion of the sched switch tracepoint inserted a new
argument in the middle of the arguments. This reordering broke BPF
programs which relied on the old argument list.
While tracepoints are not considered stable ABI, it's not trivial to
make BPF cope with such a change, but it's being worked on. For now
restore the original argument order and move the new argument to the
end of the argument list"
* tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/tracing: Append prev_state to tp args instead
Linus Torvalds [Sun, 15 May 2022 13:37:05 +0000 (06:37 -0700)]
Merge tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a recent (introduced in 5.16) regression in the core
interrupt code.
The consolidation of the interrupt handler invocation code added an
unconditional warning when generic_handle_domain_irq() is invoked from
outside hard interrupt context. That's overbroad as the requirement
for invoking these handlers in hard interrupt context is only required
for certain interrupt types. The subsequently called code already
contains a warning which triggers conditionally for interrupt chips
which indicate this requirement in their properties.
Remove the overbroad one"
* tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
Linus Torvalds [Sat, 14 May 2022 18:43:47 +0000 (11:43 -0700)]
Merge tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix two NDEBUG warnings in 'perf bench numa'
- Fix ARM coresight `perf test` failure
- Sync linux/kvm.h with the kernel sources
- Add James and Mike as Arm64 performance events reviewers
* tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
MAINTAINERS: Add James and Mike as Arm64 performance events reviewers
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf tests: Fix coresight `perf test` failure.
perf bench: Fix two numa NDEBUG warnings
Linus Torvalds [Fri, 13 May 2022 23:20:25 +0000 (16:20 -0700)]
Merge tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"Turns out I was right, some fixes hadn't made it to me yet. The vmwgfx
ones also popped up later, but all seem like bad enough things to fix.
The dma-buf, vc4 and nouveau ones are all pretty small.
The fbdev fixes are a bit more complicated: a fix to cleanup fbdev
devices properly, uncovered some use-after-free bugs in existing
drivers. Then the fix for those bugs wasn't correct. This reverts that
fix, and puts the proper fixes in place in the drivers to avoid the
use-after-frees.
This has had a fair number of eyes on it at this stage, and I'm
confident enough that it puts things in the right place, and is less
dangerous than reverting our way out of the initial change at this
stage.
fbdev:
- revert NULL deref fix that turned into a use-after-free
- prevent use-after-free in fbdev
- efifb/simplefb/vesafb: fix cleanup paths to avoid use-after-frees
dma-buf:
- fix panic in stats setup
vc4:
- fix hdmi build
nouveau:
- tegra iommu present fix
- fix leak in backlight name
vmwgfx:
- Black screen due to fences using FIFO checks on SVGA3
- Random black screens on boot due to uninitialized drm_mode_fb_cmd2
- Hangs on SVGA3 due to command buffers being used with gbobjects"
* tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm:
drm/vmwgfx: Disable command buffers on svga3 without gbobjects
drm/vmwgfx: Initialize drm_mode_fb_cmd2
drm/vmwgfx: Fix fencing on SVGAv3
drm/vc4: hdmi: Fix build error for implicit function declaration
dma-buf: call dma_buf_stats_setup after dmabuf is in valid list
fbdev: efifb: Fix a use-after-free due early fb_info cleanup
drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()
drm/nouveau/tegra: Stop using iommu_present()
fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: Prevent possible use-after-free in fb_release()
Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"
Dave Airlie [Fri, 13 May 2022 22:34:01 +0000 (08:34 +1000)]
Merge tag 'drm-misc-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Multiple fixes to fbdev to address a regression at unregistration, an
iommu detection improvement for nouveau, a memory leak fix for nouveau,
pointer dereference fix for dma_buf_file_release(), and a build breakage
fix for vc4
Dave Airlie [Fri, 13 May 2022 22:29:41 +0000 (08:29 +1000)]
Merge tag 'vmwgfx-drm-fixes-5.18-2022-05-13' of https://gitlab.freedesktop.org/zack/vmwgfx into drm-fixes
vmwgfx fixes for:
- Black screen due to fences using FIFO checks on SVGA3
- Random black screens on boot due to uninitialized drm_mode_fb_cmd2
- Hangs on SVGA3 due to command buffers being used with gbobjects
Linus Torvalds [Fri, 13 May 2022 21:32:53 +0000 (14:32 -0700)]
Merge tag 'gfs2-v5.18-rc4-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"We've finally identified commit 5a0d19d44d32 ("gfs2: Introduce flag
for glock holder auto-demotion") to be the other cause of the
filesystem corruption we've been seeing. This feature isn't strictly
necessary anymore, so we've decided to stop using it for now.
With this and the gfs_iomap_end rounding fix you've already seen
("gfs2: Fix filesystem block deallocation for short writes" in this
pull request), we're corruption free again now.
- Fix filesystem block deallocation for short writes.
- Stop using glock holder auto-demotion for now.
- Get rid of buffered writes inefficiencies due to page faults being
disabled.
- Minor other cleanups"
* tag 'gfs2-v5.18-rc4-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Stop using glock holder auto-demotion for now
gfs2: buffered write prefaulting
gfs2: Align read and write chunks to the page cache
gfs2: Pull return value test out of should_fault_in_pages
gfs2: Clean up use of fault_in_iov_iter_{read,write}able
gfs2: Variable rename
gfs2: Fix filesystem block deallocation for short writes
gfs2: Stop using glock holder auto-demotion for now
We're having unresolved issues with the glock holder auto-demotion mechanism
introduced in commit 5a0d19d44d32. This mechanism was assumed to be essential
for avoiding frequent short reads and writes until commit cc8f96fca13e
("gfs2: No short reads or writes upon glock contention"). Since then,
when the inode glock is lost, it is simply re-acquired and the operation
is resumed. This means that apart from the performance penalty, we
might as well drop the inode glock before faulting in pages, and
re-acquire it afterwards.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_file_buffered_write, to increase the likelihood that all the
user memory we're trying to write will be resident in memory, carry out
the write in chunks and fault in each chunk of user memory before trying
to write it. Otherwise, some workloads will trigger frequent short
"internal" writes, causing filesystem blocks to be allocated and then
partially deallocated again when writing into holes, which is wasteful
and breaks reservations.
Neither the chunked writes nor any of the short "internal" writes are
user visible.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Linus Torvalds [Fri, 13 May 2022 20:13:48 +0000 (13:13 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers.
These patches mosly fix error legs and exceptional conditions
(scsi_dh_alua, qla2xxx). The lpfc fixes are for coding issues with
lpfc features"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE
scsi: lpfc: Fix split code for FLOGI on FCoE
scsi: qla2xxx: Fix missed DMA unmap for aborted commands
scsi: scsi_dh_alua: Properly handle the ALUA transitioning state
gfs2: Align read and write chunks to the page cache
Align the chunks that reads and writes are carried out in to the page
cache rather than the user buffers. This will be more efficient in
general, especially for allocating writes. Optimizing the case that the
user buffer is gfs2 backed isn't very useful; we only need to make sure
we won't deadlock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
gfs2: Pull return value test out of should_fault_in_pages
Pull the return value test of the previous read or write operation out
of should_fault_in_pages(). In a following patch, we'll fault in pages
before the I/O and there will be no return value to check.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Instead of counting the number of bytes read from the filesystem,
functions gfs2_file_direct_read and gfs2_file_read_iter count the number
of bytes written into the user buffer. Conversely, functions
gfs2_file_direct_write and gfs2_file_buffered_write count the number of
bytes read from the user buffer. This is nothing but confusing, so
change the read functions to count how many bytes they have read, and
the write functions to count how many bytes they have written.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
gfs2: Fix filesystem block deallocation for short writes
When a write cannot be carried out in full, gfs2_iomap_end() releases
blocks that have been allocated for this write but haven't been used.
To compute the end of the allocation, gfs2_iomap_end() incorrectly
rounded the end of the attempted write down to the next block boundary
to arrive at the end of the allocation. It would have to round up, but
the end of the allocation is also available as iomap->offset +
iomap->length, so just use that instead.
In addition, use round_up() for computing the start of the unused range.
Linus Torvalds [Fri, 13 May 2022 18:12:04 +0000 (11:12 -0700)]
Merge tag 'ceph-for-5.18-rc7' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"Two fixes to properly maintain xattrs on async creates and thus
preserve SELinux context on newly created files and to avoid improper
usage of folio->private field which triggered BUG_ONs.
Both marked for stable"
* tag 'ceph-for-5.18-rc7' of https://github.com/ceph/ceph-client:
ceph: check folio PG_private bit instead of folio->private
ceph: fix setting of xattrs on async created inodes
Linus Torvalds [Fri, 13 May 2022 18:04:37 +0000 (11:04 -0700)]
Merge tag 'nfs-for-5.18-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"One more pull request. There was a bug in the fix to ensure that gss-
proxy continues to work correctly after we fixed the AF_LOCAL socket
leak in the RPC code. This therefore reverts that broken patch, and
replaces it with one that works correctly.
Stable fixes:
- SUNRPC: Ensure that the gssproxy client can start in a connected
state
Bugfixes:
- Revert "SUNRPC: Ensure gss-proxy connects on setup"
- nfs: fix broken handling of the softreval mount option"
* tag 'nfs-for-5.18-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: fix broken handling of the softreval mount option
SUNRPC: Ensure that the gssproxy client can start in a connected state
Revert "SUNRPC: Ensure gss-proxy connects on setup"
Linus Torvalds [Fri, 13 May 2022 17:22:37 +0000 (10:22 -0700)]
Merge tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Seven MM fixes, three of which address issues added in the most recent
merge window, four of which are cc:stable.
Three non-MM fixes, none very serious"
[ And yes, that's a real pull request from Andrew, not me creating a
branch from emailed patches. Woo-hoo! ]
* tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add a mailing list for DAMON development
selftests: vm: Makefile: rename TARGETS to VMTARGETS
mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
mailmap: add entry for martyna.szapar-mudlaw@intel.com
arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map
procfs: prevent unprivileged processes accessing fdinfo dir
mm: mremap: fix sign for EFAULT error return value
mm/hwpoison: use pr_err() instead of dump_page() in get_any_page()
mm/huge_memory: do not overkill when splitting huge_zero_page
Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
Linus Torvalds [Fri, 13 May 2022 17:10:07 +0000 (10:10 -0700)]
Merge tag 'hwmon-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Restrict ltq-cputemp to SOC_XWAY to fix build failure
- Add OF device ID table to tmp401 driver to enable auto-load
* tag 'hwmon-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltq-cputemp) restrict it to SOC_XWAY
hwmon: (tmp401) Add OF device ID table
Linus Torvalds [Fri, 13 May 2022 17:00:37 +0000 (10:00 -0700)]
Merge tag 'drm-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Pretty quiet week on the fixes front, 4 amdgpu and one i915 fix.
I think there might be a few misc fbdev ones outstanding, but I'll see
if they are necessary and pass them on if so.
amdgpu:
- Disable ASPM for VI boards on ADL platforms
- S0ix DCN3.1 display fix
- Resume regression fix
- Stable pstate fix
i915:
- fix for kernel memory corruption when running a lot of OpenCL tests
in parallel"
* tag 'drm-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)
Revert "drm/amd/pm: keep the BACO feature enabled for suspend"
drm/i915: Fix race in __i915_vma_remove_closed
drm/amd/display: undo clearing of z10 related function pointers
drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems
Zack Rusin [Fri, 18 Mar 2022 17:43:31 +0000 (13:43 -0400)]
drm/vmwgfx: Disable command buffers on svga3 without gbobjects
With very limited vram on svga3 it's difficult to handle all the surface
migrations. Without gbobjects, i.e. the ability to store surfaces in
guest mobs, there's no reason to support intermediate svga2 features,
especially because we can fall back to fb traces and svga3 will never
support those in-between features.
On svga3 we wither want to use fb traces or screen targets
(i.e. gbobjects), nothing in between. This fixes presentation on a lot
of fusion/esxi tech previews where the exposed svga3 caps haven't been
finalized yet.
Zack Rusin [Wed, 2 Mar 2022 15:24:24 +0000 (10:24 -0500)]
drm/vmwgfx: Initialize drm_mode_fb_cmd2
Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure
unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags
and modifiers which were never initialized. Garbage in those members
can cause random failures during the bringup of the fbcon.
Initializing the structure fixes random blank screens after bootup due
to flags/modifiers mismatches during the fbcon bring up.
Fixes: b8113f7a4303 ("drm/vmwgfx: Switch to mode_cmd2") Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org
Zack Rusin [Wed, 2 Mar 2022 15:24:22 +0000 (10:24 -0500)]
drm/vmwgfx: Fix fencing on SVGAv3
Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed
FIFO's and replaced them with command buffers and extra registers.
The initial version of SVGAv3 lacked support for most advanced features
(e.g. 3D) which made fences unnecessary. That is no longer the case,
especially as 3D support is being turned on.
Switch from FIFO commands and capabilities to command buffers and extra
registers to enable fences on SVGAv3.
Merge tag 'icc-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Pull interconnect fixes from Georgi:
"interconnect fixes for v5.18-rc
This contains an additional fix for sc7180 and sdx55 platforms that helps
them to enter suspend even on devices that don't have the most recent DT
changes.
- interconnect: Restore sync state by ignoring ipa-virt in provider count
Signed-off-by: Georgi Djakov <djakov@kernel.org>"
* tag 'icc-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Restore sync state by ignoring ipa-virt in provider count
The unused part precedes the new range spanned by the start, end parameters
of vmemmap_use_new_sub_pmd(). This means it actually goes from
ALIGN_DOWN(start, PMD_SIZE) up to start.
Use the correct address when applying the mark using memset.
Fixes: a16f60e0470d ("x86/vmemmap: handle unpopulated sub-pmd ranges") Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220509090637.24152-2-ken@codelabs.ch
Merge tag 'usb-serial-5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial
Johan writes:
USB-serial fixes for 5.18-rc7
Here are some new device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: qcserial: add support for Sierra Wireless EM7590
USB: serial: option: add Fibocom MA510 modem
USB: serial: option: add Fibocom L610 modem
USB: serial: pl2303: add device id for HP LM930 Display
- wifi: iwlwifi: iwl-dbg: use del_timer_sync() before freeing
- wifi: ath11k: reduce the wait time of 11d scan and hw scan while
adding an interface
- mac80211: fix rx reordering with non explicit / psmp ack policy
- mac80211: reset MBSSID parameters upon connection
- nl80211: fix races in nl80211_set_tx_bitrate_mask()
- tls: fix context leak on tls_device_down
- sched: act_pedit: really ensure the skb is writable
- batman-adv: don't skb_split skbuffs with frag_list
- eth: ocelot: fix various issues with TC actions (null-deref; bad
stats; ineffective drops; ineffective filter removal)"
* tag 'net-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
tls: Fix context leak on tls_device_down
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
mlxsw: Avoid warning during ip6gre device removal
net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
net: ethernet: mediatek: ppe: fix wrong size passed to memset()
Bluetooth: Fix the creation of hdev->name
i40e: i40e_main: fix a missing check on list iterator
net/sched: act_pedit: really ensure the skb is writable
s390/lcs: fix variable dereferenced before check
s390/ctcm: fix potential memory leak
s390/ctcm: fix variable dereferenced before check
net: atlantic: verify hw_head_ lies within TX buffer ring
net: atlantic: add check for MAX_SKB_FRAGS
net: atlantic: reduce scope of is_rsc_complete
net: atlantic: fix "frag[0] not initialized"
net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()
net: phy: micrel: Fix incorrect variable type in micrel
decnet: Use container_of() for struct dn_neigh casts
...
Linus Torvalds [Thu, 12 May 2022 17:42:56 +0000 (10:42 -0700)]
Merge branch 'for-5.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Waiman's fix for a cgroup2 cpuset bug where it could miss nodes which
were hot-added"
* 'for-5.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
Linus Torvalds [Thu, 12 May 2022 17:21:44 +0000 (10:21 -0700)]
Merge tag 'fixes_for_v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fs fixes from Jan Kara:
"Three fixes that I'd still like to get to 5.18:
- add a missing sanity check in the fanotify FAN_RENAME feature
(added in 5.17, let's fix it before it gets wider usage in
userspace)
- udf fix for recently introduced filesystem corruption issue
- writeback fix for a race in inode list handling that can lead to
delayed writeback and possible dirty throttling stalls"
* tag 'fixes_for_v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Avoid using stale lengthOfImpUse
writeback: Avoid skipping inode writeback
fanotify: do not allow setting dirent events in mask of non-dir
The commit cited below claims to fix a use-after-free condition after
tls_device_down. Apparently, the description wasn't fully accurate. The
context stayed alive, but ctx->netdev became NULL, and the offload was
torn down without a proper fallback, so a bug was present, but a
different kind of bug.
Due to misunderstanding of the issue, the original patch dropped the
refcount_dec_and_test line for the context to avoid the alleged
premature deallocation. That line has to be restored, because it matches
the refcount_inc_not_zero from the same function, otherwise the contexts
that survived tls_device_down are leaked.
This patch fixes the described issue by restoring refcount_dec_and_test.
After this change, there is no leak anymore, and the fallback to
software kTLS still works.
Fixes: 28fc4d928033 ("net/tls: Fix use-after-free after the TLS device goes down and up") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220512091830.678684-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Thu, 12 May 2022 05:47:09 +0000 (05:47 +0000)]
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
In the NIC ->probe() callback, ->mtd_probe() callback is called.
If NIC has 2 ports, ->probe() is called twice and ->mtd_probe() too.
In the ->mtd_probe(), which is efx_ef10_mtd_probe() it allocates and
initializes mtd partiion.
But mtd partition for sfc is shared data.
So that allocated mtd partition data from last called
efx_ef10_mtd_probe() will not be used.
Therefore it must be freed.
But it doesn't free a not used mtd partition data in efx_ef10_mtd_probe().
Guangguan Wang [Thu, 12 May 2022 03:08:20 +0000 (11:08 +0800)]
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
Non blocking sendmsg will return -EAGAIN when any signal pending
and no send space left, while non blocking recvmsg return -EINTR
when signal pending and no data received. This may makes confused.
As TCP returns -EAGAIN in the conditions described above. Align the
behavior of smc with TCP.
Fixes: 45159abdee88 ("net/smc: add receive timeout check") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20220512030820.73848-1-guangguan.wang@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Thu, 12 May 2022 02:17:31 +0000 (19:17 -0700)]
net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
After commit 30273ea6eedd ("net: dsa/bcm_sf2: fix incorrect usage of
state->link") the interface suspend path would call our mac_link_down()
call back which would forcibly set the link down, thus preventing
Wake-on-LAN packets from reaching our management port.
Fix this by looking at whether the port is enabled for Wake-on-LAN and
not clearing the link status in that case to let packets go through.
Chunfeng Yun [Thu, 12 May 2022 06:49:31 +0000 (14:49 +0800)]
usb: xhci-mtk: remove bandwidth budget table
The bandwidth budget table is introduced to trace ideal bandwidth used
by each INT/ISOC endpoint, but in fact the endpoint may consume more
bandwidth and cause data transfer error, so it's better to leave some
margin. Obviously it's difficult to find the best margin for all cases,
instead take use of the worst-case scenario.
Chunfeng Yun [Thu, 12 May 2022 06:49:30 +0000 (14:49 +0800)]
usb: xhci-mtk: fix fs isoc's transfer error
Due to the scheduler allocates the optimal bandwidth for FS ISOC endpoints,
this may be not enough actually and causes data transfer error, so come up
with an estimate that is no less than the worst case bandwidth used for
any one mframe, but may be an over-estimate.
ChiYuan Huang [Tue, 10 May 2022 05:13:00 +0000 (13:13 +0800)]
usb: typec: tcpci_mt6360: Update for BMC PHY setting
Update MT6360 BMC PHY Tx/Rx setting for the compatibility.
Macpaul reported this CtoDP cable attention message cannot be received from
MT6360 TCPC. But actually, attention message really sent from UFP_D
device.
After RD's comment, there may be BMC PHY Tx/Rx setting causes this issue.
Shreyas K K [Thu, 12 May 2022 11:01:34 +0000 (16:31 +0530)]
arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs
Add KRYO4XX gold/big cores to the list of CPUs that need the
repeat TLBI workaround. Apply this to the affected
KRYO4XX cores (rcpe to rfpe).
The variant and revision bits are implementation defined and are
different from the their Cortex CPU counterparts on which they are
based on, i.e., (r0p0 to r3p0) is equivalent to (rcpe to rfpe).
Amit Cohen [Wed, 11 May 2022 11:57:47 +0000 (14:57 +0300)]
mlxsw: Avoid warning during ip6gre device removal
IPv6 addresses which are used for tunnels are stored in a hash table
with reference counting. When a new GRE tunnel is configured, the driver
is notified and configures it in hardware.
Currently, any change in the tunnel is not applied in the driver. It
means that if the remote address is changed, the driver is not aware of
this change and the first address will be used.
This behavior results in a warning [1] in scenarios such as the
following:
# ip link add name gre1 type ip6gre local 2000::3 remote 2000::fffe tos inherit ttl inherit
# ip link set name gre1 type ip6gre local 2000::3 remote 2000::ffff ttl inherit
# ip link delete gre1
The change of the address is not applied in the driver. Currently, the
driver uses the remote address which is stored in the 'parms' of the
overlay device. When the tunnel is removed, the new IPv6 address is
used, the driver tries to release it, but as it is not aware of the
change, this address is not configured and it warns about releasing non
existing IPv6 address.
Fix it by using the IPv6 address which is cached in the IPIP entry, this
address is the last one that the driver used, so even in cases such the
above, the first address will be released, without any warning.
The ID register table should have one entry per ID register but
currently has two entries for ID_AA64ISAR2_EL1. Only one entry has an
override, and get_arm64_ftr_reg() can end up choosing the other, causing
the override to be ignored. Fix this by removing the duplicate entry.
While here, also make the check in sort_ftr_regs() more strict so that
duplicate entries can't be added in the future.
Fixes: 59d18ecae89c ("arm64: Add support of PAuth QARMA3 architected algorithm") Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20220511162030.1403386-1-kristina.martsenko@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Hui Tang [Tue, 10 May 2022 13:51:48 +0000 (21:51 +0800)]
drm/vc4: hdmi: Fix build error for implicit function declaration
drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_connector_detect’:
drivers/gpu/drm/vc4/vc4_hdmi.c:228:7: error: implicit declaration of function ‘gpiod_get_value_cansleep’; did you mean ‘gpio_get_value_cansleep’? [-Werror=implicit-function-declaration]
if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_get_value_cansleep
CC [M] drivers/gpu/drm/vc4/vc4_validate.o
CC [M] drivers/gpu/drm/vc4/vc4_v3d.o
CC [M] drivers/gpu/drm/vc4/vc4_validate_shaders.o
CC [M] drivers/gpu/drm/vc4/vc4_debugfs.o
drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_bind’:
drivers/gpu/drm/vc4/vc4_hdmi.c:2883:23: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_clk_get_optional’? [-Werror=implicit-function-declaration]
vc4_hdmi->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
^~~~~~~~~~~~~~~~~~~~~~~
devm_clk_get_optional
drivers/gpu/drm/vc4/vc4_hdmi.c:2883:59: error: ‘GPIOD_IN’ undeclared (first use in this function); did you mean ‘GPIOF_IN’?
vc4_hdmi->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
^~~~~~~~
GPIOF_IN
drivers/gpu/drm/vc4/vc4_hdmi.c:2883:59: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors
Florian Fainelli [Wed, 11 May 2022 03:17:51 +0000 (20:17 -0700)]
net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
The interrupt controller supplying the Wake-on-LAN interrupt line maybe
modular on some platforms (irq-bcm7038-l1.c) and might be probed at a
later time than the GENET driver. We need to specifically check for
-EPROBE_DEFER and propagate that error to ensure that we eventually
fetch the interrupt descriptor.
Fixes: 06c4e54d52fa ("bcmgenet: add WOL IRQ check") Fixes: c528170c7efb ("net: bcmgenet: Avoid touching non-existent interrupt") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220511031752.2245566-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yang Yingliang [Wed, 11 May 2022 03:08:29 +0000 (11:08 +0800)]
net: ethernet: mediatek: ppe: fix wrong size passed to memset()
'foe_table' is a pointer, the real size of struct mtk_foe_entry
should be pass to memset().
Fixes: 134df30a2f33 ("net: ethernet: mtk_eth_soc: add support for initializing the PPE") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220511030829.3308094-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Thu, 12 May 2022 00:40:39 +0000 (17:40 -0700)]
Merge tag 'for-net-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix the creation of hdev->name when index is greater than 9999
* tag 'for-net-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix the creation of hdev->name
====================
Jakub Kicinski [Thu, 12 May 2022 00:33:01 +0000 (17:33 -0700)]
Merge tag 'wireless-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.18
Second set of fixes for v5.18 and hopefully the last one. We have a
new iwlwifi maintainer, a fix to rfkill ioctl interface and important
fixes to both stack and two drivers.
* tag 'wireless-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
nl80211: fix locking in nl80211_set_tx_bitrate_mask()
mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
mac80211_hwsim: fix RCU protected chanctx access
mailmap: update Kalle Valo's email
mac80211: Reset MBSSID parameters upon connection
cfg80211: retrieve S1G operating channel number
nl80211: validate S1G channel width
mac80211: fix rx reordering with non explicit / psmp ack policy
ath11k: reduce the wait time of 11d scan and hw scan while add interface
MAINTAINERS: update iwlwifi driver maintainer
iwlwifi: iwl-dbg: Use del_timer_sync() before freeing
====================
Itay Iellin [Sat, 7 May 2022 12:32:48 +0000 (08:32 -0400)]
Bluetooth: Fix the creation of hdev->name
Set a size limit of 8 bytes of the written buffer to "hdev->name"
including the terminating null byte, as the size of "hdev->name" is 8
bytes. If an id value which is greater than 9999 is allocated,
then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)"
function call would lead to a truncation of the id value in decimal
notation.
Set an explicit maximum id parameter in the id allocation function call.
The id allocation function defines the maximum allocated id value as the
maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined
as 10000.
Signed-off-by: Itay Iellin <ieitayie@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Delyan Kratunov [Wed, 11 May 2022 18:28:36 +0000 (18:28 +0000)]
sched/tracing: Append prev_state to tp args instead
Commit ed1898737372 (sched/tracing: Don't re-read p->state when emitting
sched_switch event, 2022-01-20) added a new prev_state argument to the
sched_switch tracepoint, before the prev task_struct pointer.
This reordering of arguments broke BPF programs that use the raw
tracepoint (e.g. tp_btf programs). The type of the second argument has
changed and existing programs that assume a task_struct* argument
(e.g. for bpf_task_storage access) will now fail to verify.
If we instead append the new argument to the end, all existing programs
would continue to work and can conditionally extract the prev_state
argument on supported kernel versions.
Fixes: ed1898737372 (sched/tracing: Don't re-read p->state when emitting sched_switch event, 2022-01-20) Signed-off-by: Delyan Kratunov <delyank@fb.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lkml.kernel.org/r/c8a6930dfdd58a4a5755fc01732675472979732b.camel@fb.com
Xiaomeng Tong [Tue, 10 May 2022 20:48:46 +0000 (13:48 -0700)]
i40e: i40e_main: fix a missing check on list iterator
The bug is here:
ret = i40e_add_macvlan_filter(hw, ch->seid, vdev->dev_addr, &aq_err);
The list iterator 'ch' will point to a bogus position containing
HEAD if the list is empty or no element is found. This case must
be checked before any use of the iterator, otherwise it will
lead to a invalid memory access.
To fix this bug, use a new variable 'iter' as the list iterator,
while use the origin variable 'ch' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org Fixes: 7b6ff2ed0a5e9 ("i40e: Add macvlan support on i40e") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220510204846.2166999-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 10 May 2022 14:57:34 +0000 (16:57 +0200)]
net/sched: act_pedit: really ensure the skb is writable
Currently pedit tries to ensure that the accessed skb offset
is writable via skb_unclone(). The action potentially allows
touching any skb bytes, so it may end-up modifying shared data.
The above causes some sporadic MPTCP self-test failures, due to
this code:
The above modifies a data byte outside the skb head and the skb is
a cloned one, carrying a TCP output packet.
This change addresses the issue by keeping track of a rough
over-estimate highest skb offset accessed by the action and ensuring
such offset is really writable.
Note that this may cause performance regressions in some scenarios,
but hopefully pedit is not in the critical path.
Fixes: e89869832520 ("act_pedit: access skb->data safely") Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/1fcf78e6679d0a287dd61bb0f04730ce33b3255d.1652194627.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Deucher [Tue, 10 May 2022 14:32:26 +0000 (10:32 -0400)]
drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)
Check if the requested stable pstate matches the current one before
changing it. This avoids changing the stable pstate on context
destroy if the user never changed it in the first place via the
IOCTL.
v2: compare the current and requested rather than setting a flag (Lijo)
Fixes: 939eac4dd67c92 ("drm/amdgpu/UAPI: add new CTX OP to get/set stable pstates") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Commit 0df9a3860fa0 ("drm/amdgpu: don't use BACO for reset in S3")
stops using BACO for reset during suspend, so it's no longer
necessary to leave BACO enabled during suspend. This fixes
resume from suspend on the navy flounder dGPU in the ASUS ROG
Strix G513QY.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2008
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1982 Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alexander Graf [Tue, 10 May 2022 12:37:17 +0000 (14:37 +0200)]
KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
Commit c63f6cd6965c ("powerpc/32s: Convert switch_mmu_context() to C")
moved the switch_mmu_context() to C. While in principle a good idea, it
meant that the function now uses the stack. The stack is not accessible
from real mode though.
So to keep calling the function, let's turn on MSR_DR while we call it.
That way, all pointer references to the stack are handled virtually.
In addition, make sure to save/restore r12 on the stack, as it may get
clobbered by the C function.
Fixes: c63f6cd6965c ("powerpc/32s: Convert switch_mmu_context() to C") Cc: stable@vger.kernel.org # v5.14+ Reported-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Alexander Graf <graf@amazon.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220510123717.24508-1-graf@amazon.com
David S. Miller [Wed, 11 May 2022 11:31:01 +0000 (12:31 +0100)]
Merge branch 's390-net-fixes'
Alexandra Winter says:
====================
s390/net: Cleanup some code checker findings
clean up smatch findings in legacy code. I was not able to provoke
any real failures on my systems, but other hardware reactions,
timing conditions or compiler output, may cause failures.
There are still 2 smatch warnings left in s390/net:
drivers/s390/net/ctcm_main.c:1326 add_channel() warn: missing error code 'rc'
This one is a false positive.
drivers/s390/net/netiucv.c:1355 netiucv_check_user() warn: argument 3 to %02x specifier has type 'char'
Postponing this one, need to better understand string handling in iucv.
There are several sparse warnings left in ctcm, like:
drivers/s390/net/ctcm_fsms.c:573:9: warning: context imbalance in 'ctcm_chx_setmode' - different lock contexts for basic block
Those are mentioned in the source, no plan to rework.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Tue, 10 May 2022 07:05:08 +0000 (09:05 +0200)]
s390/lcs: fix variable dereferenced before check
smatch complains about
drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739)
Fixes: 4852da22b200 ("[PATCH] s390: lcs driver bug fixes and improvements [1/2]") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Tue, 10 May 2022 07:05:07 +0000 (09:05 +0200)]
s390/ctcm: fix potential memory leak
smatch complains about
drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo'
mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in
ctcmpc_unpack_skb().
Fixes: cb277cb3733b ("ctcm: infrastructure for replaced ctc driver") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Tue, 10 May 2022 07:05:06 +0000 (09:05 +0200)]
s390/ctcm: fix variable dereferenced before check
Found by cppcheck and smatch.
smatch complains about
drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42)
Fixes: caa8c2f49b23 ("ctcm: rename READ/WRITE defines to avoid redefinitions") Reported-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 May 2022 11:25:07 +0000 (12:25 +0100)]
Merge branch 'atlantic-fixes'
Grant Grundler says:
====================
net: atlantic: more fuzzing fixes
It essentially describes four problems:
1) validate rxd_wb->next_desc_ptr before populating buff->next
2) "frag[0] not initialized" case in aq_ring_rx_clean()
3) limit iterations handling fragments in aq_ring_rx_clean()
4) validate hw_head_ in hw_atl_b0_hw_ring_tx_head_update()
(1) was fixed by Zekun Shen <bruceshenzk@gmail.com> around the same time with
"atlantic: Fix buff_ring OOB in aq_ring_rx_clean" (SHA1 bb54d5b0074e3925).
I've added one "clean up" contribution:
"net: atlantic: reduce scope of is_rsc_complete"
I tested the "original" patches using chromeos-v5.4 kernel branch:
https://chromium-review.googlesource.com/q/hashtag:pcinet-atlantic-2022q1+(status:open%20OR%20status:merged)
I've forward ported those patches to 5.18-rc2 and compiled them but am
unable to test them on 5.18-rc2 kernel (logistics problems).
Credit largely goes to ChromeOS Fuzzing team members:
Aashay Shringarpure, Yi Chou, Shervin Oloumi
V2 changes:
o drop first patch - was already fixed upstream differently
o reduce (4) "validate hw_head_" to simple bounds checking.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Grant Grundler [Tue, 10 May 2022 02:28:26 +0000 (19:28 -0700)]
net: atlantic: verify hw_head_ lies within TX buffer ring
Bounds check hw_head index provided by NIC to verify it lies
within the TX buffer ring.
Reported-by: Aashay Shringarpure <aashay@google.com> Reported-by: Yi Chou <yich@google.com> Reported-by: Shervin Oloumi <enlightened@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Grant Grundler [Tue, 10 May 2022 02:28:25 +0000 (19:28 -0700)]
net: atlantic: add check for MAX_SKB_FRAGS
Enforce that the CPU can not get stuck in an infinite loop.
Reported-by: Aashay Shringarpure <aashay@google.com> Reported-by: Yi Chou <yich@google.com> Reported-by: Shervin Oloumi <enlightened@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Grant Grundler [Tue, 10 May 2022 02:28:23 +0000 (19:28 -0700)]
net: atlantic: fix "frag[0] not initialized"
In aq_ring_rx_clean(), if buff->is_eop is not set AND
buff->len < AQ_CFG_RX_HDR_SIZE, then hdr_len remains equal to
buff->len and skb_add_rx_frag(xxx, *0*, ...) is not called.
The loop following this code starts calling skb_add_rx_frag() starting
with i=1 and thus frag[0] is never initialized. Since i is initialized
to zero at the top of the primary loop, we can just reference and
post-increment i instead of hardcoding the 0 when calling
skb_add_rx_frag() the first time.
Reported-by: Aashay Shringarpure <aashay@google.com> Reported-by: Yi Chou <yich@google.com> Reported-by: Shervin Oloumi <enlightened@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
James Smart [Fri, 6 May 2022 20:55:48 +0000 (13:55 -0700)]
scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE
Garbage FCoE CT frames are transmitted on the wire because of bad DMA ptr
addresses filled in the GEN_REQ_WQE.
The __lpfc_sli_prep_gen_req_s4() routine is using the wrong buffer for the
payload address. Change the DMA buffer assignment from the bmp buffer to
the bpl buffer.
Link: https://lore.kernel.org/r/20220506205548.61644-1-jsmart2021@gmail.com Fixes: 2d834a7cd0d0 ("scsi: lpfc: SLI path split: Refactor CT paths") Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 6 May 2022 20:55:28 +0000 (13:55 -0700)]
scsi: lpfc: Fix split code for FLOGI on FCoE
The refactoring code converted context information from SLI-3 to SLI-4.
The conversion for the SLI-4 bit field tried to use the old (hacky) SLI3
high/low bit settings. Needless to say, it was incorrect.
Explicitly set the context field to type FCFI and set it in the wqe.
SLI-4 is now a proper bit field so no need for the shifting/anding.
Link: https://lore.kernel.org/r/20220506205528.61590-1-jsmart2021@gmail.com Fixes: 2550b64d0742 ("scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path") Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lukas Wunner [Tue, 10 May 2022 07:56:05 +0000 (09:56 +0200)]
genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
Since commit 1be9967896d8 ("irq: remove handle_domain_{irq,nmi}()"),
generic_handle_domain_irq() warns if called outside hardirq context, even
though the function calls down to handle_irq_desc(), which warns about the
same, but conditionally on handle_enforce_irqctx().
The newly added warning is a false positive if the interrupt originates
from any other irqchip than x86 APIC or ARM GIC/GICv3. Those are the only
ones for which handle_enforce_irqctx() returns true. Per commit 8b0db4242d37 ("genirq: Add protection against unsafe usage of
generic_handle_irq()"):
"In general calling generic_handle_irq() with interrupts disabled from non
interrupt context is harmless. For some interrupt controllers like the
x86 trainwrecks this is outright dangerous as it might corrupt state if
an interrupt affinity change is pending."
Examples for interrupt chips where the warning is a false positive are
USB-attached GPIO controllers such as drivers/gpio/gpio-dln2.c:
USB gadgets are incapable of directly signaling an interrupt because they
cannot initiate a bus transaction by themselves. All communication on
the bus is initiated by the host controller, which polls a gadget's
Interrupt Endpoint in regular intervals. If an interrupt is pending,
that information is passed up the stack in softirq context, from which a
hardirq is synthesized via generic_handle_domain_irq().
Remove the warning to eliminate such false positives.
Wan Jiabing [Mon, 9 May 2022 14:45:19 +0000 (22:45 +0800)]
net: phy: micrel: Fix incorrect variable type in micrel
In lanphy_read_page_reg, calling __phy_read() might return a negative
error code. Use 'int' to check the error code.
Fixes: 48718dbd2e78 ("net: phy: micrel: Add support for LAN8804 PHY") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220509144519.2343399-1-wanjiabing@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mathieu Poirier [Mon, 9 May 2022 16:35:10 +0000 (10:35 -0600)]
MAINTAINERS: Add James and Mike as Arm64 performance events reviewers
James, Mike and Leo have been doing all the reviews and development work
for the Coresight perf tools for a couple of years now. As such remove
my name and add James and Mike as official reviewers (Leo is already
listed as such).
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: James Clark <james.clark@arm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jan Kara [Tue, 10 May 2022 10:36:04 +0000 (12:36 +0200)]
udf: Avoid using stale lengthOfImpUse
udf_write_fi() uses lengthOfImpUse of the entry it is writing to.
However this field has not yet been initialized so it either contains
completely bogus value or value from last directory entry at that place.
In either case this is wrong and can lead to filesystem corruption or
kernel crashes.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> CC: stable@vger.kernel.org Fixes: 714251660b67 ("udf: Get rid of 0-length arrays in struct fileIdentDesc") Signed-off-by: Jan Kara <jack@suse.cz>
Joey Gouly [Tue, 10 May 2022 10:27:21 +0000 (11:27 +0100)]
arm64: vdso: fix makefile dependency on vdso.so
There is currently no dependency for vdso*-wrap.S on vdso*.so, which means that
you can get a build that uses a stale vdso*-wrap.o.
In commit 988c290eac02, the file that includes the vdso.so was moved and renamed
from arch/arm64/kernel/vdso/vdso.S to arch/arm64/kernel/vdso-wrap.S, when this
happened the Makefile was not updated to force the dependcy on vdso.so.
Fixes: 988c290eac02 ("arm64: do not descend to vdso directories twice") Signed-off-by: Joey Gouly <joey.gouly@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220510102721.50811-1-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Jing Xia [Tue, 10 May 2022 02:35:14 +0000 (10:35 +0800)]
writeback: Avoid skipping inode writeback
We have run into an issue that a task gets stuck in
balance_dirty_pages_ratelimited() when perform I/O stress testing.
The reason we observed is that an I_DIRTY_PAGES inode with lots
of dirty pages is in b_dirty_time list and standard background
writeback cannot writeback the inode.
After studing the relevant code, the following scenario may lead
to the issue:
This patch moves the dirty inode to b_dirty list when the inode
currently is not queued in b_io or b_more_io list at the end of
writeback_single_inode.
Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: stable@vger.kernel.org Fixes: d4c16982eb77 ("vfs: add support for a lazytime mount option") Signed-off-by: Jing Xia <jing.xia@unisoc.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220510023514.27399-1-jing.xia@unisoc.com
projects / kernel.git / log