random: rather than entropy_store abstraction, use global
Originally, the RNG used several pools, so having things abstracted out
over a generic entropy_store object made sense. These days, there's only
one input pool, and then an uneven mix of usage via the abstraction and
usage via &input_pool. Rather than this uneasy mixture, just get rid of
the abstraction entirely and have things always use the global. This
simplifies the code and makes reading it a bit easier.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This argument is always set to zero, as a result of us not caring about
keeping a certain amount reserved in the pool these days. So just remove
it and cleanup the function signatures.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
There were a few things added under the "if (fips_enabled)" banner,
which never really got completed, and the FIPS people anyway are
choosing a different direction. Rather than keep around this halfbaked
code, get rid of it so that we can focus on a single design of the RNG
rather than two designs.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than using the userspace type, __uXX, switch to using uXX. And
rather than using variously chosen `char *` or `unsigned char *`, use
`u8 *` uniformly for things that aren't strings, in the case where we
are doing byte-by-byte traversal.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now that we're only using one polynomial, we can cleanup its
representation into constants, instead of passing around pointers
dynamically to select different polynomials. This improves the codegen
and makes the code a bit more straightforward.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
lib/crypto: sha1: re-roll loops to reduce code size
With SHA-1 no longer being used for anything performance oriented, and
also soon to be phased out entirely, we can make up for the space added
by unrolled BLAKE2s by simply re-rolling SHA-1. Since SHA-1 is so much
more complex, re-rolling it more or less takes care of the code size
added by BLAKE2s. And eventually, hopefully we'll see SHA-1 removed
entirely from most small kernel builds.
Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ard Biesheuvel <ardb@kernel.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
lib/crypto: blake2s: move hmac construction into wireguard
Basically nobody should use blake2s in an HMAC construction; it already
has a keyed variant. But unfortunately for historical reasons, Noise,
used by WireGuard, uses HKDF quite strictly, which means we have to use
this. Because this really shouldn't be used by others, this commit moves
it into wireguard's noise.c locally, so that kernels that aren't using
WireGuard don't get this superfluous code baked in. On m68k systems,
this shaves off ~314 bytes.
Cc: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Justin M. Forbes [Wed, 12 Jan 2022 14:01:38 +0000 (08:01 -0600)]
lib/crypto: add prompts back to crypto libraries
Commit c63117175cce2 ("lib/crypto: blake2s: include as built-in") took
away a number of prompt texts from other crypto libraries. This makes
values flip from built-in to module when oldconfig runs, and causes
problems when these crypto libs need to be built in for thingslike
BIG_KEYS.
Fixes: c63117175cce2 ("lib/crypto: blake2s: include as built-in") Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
[Jason: - moved menu into submenu of lib/ instead of root menu
- fixed chacha sub-dependencies for CONFIG_CRYPTO] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Linus Torvalds [Tue, 18 Jan 2022 08:14:49 +0000 (10:14 +0200)]
Merge tag 'ata-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA updates from Damien Le Moal:
"A larger than usual set of changes for this cycle. The bulk of the
changes are part of a rework of libata messages and debugging features
from Hannes. In more detail, the changes are as follows.
- Small code cleanups in the pata_ali driver (unnecessary variable
initialization and simplified return statement, from Jason and
Colin.
- Switch to using struct_group() in the sata_fsl driver, from Kees.
- Convert many sysfs attribute show functions to use sysfs_emit()
instead of snprintf(), from me.
- sata_dwc_460ex driver code cleanups, from Andy.
- Improve DMA setup and remove superfluous error message in
libahci_platform, from Andy
- A small code cleanup in libata to use min() instead of open coding
test, from Changcheng.
- Rework of libata messages from Hannes. This is especially focused
on replacing compile time defined debugging messages (DPRINTK() and
VPRINTK()) with regular dynamic debugging messages (pr_debug()) and
traceipoint events. Both libata-core and many drivers are updated
to have a consistent debugging level control for all drivers.
- Extend compile test support to as many drivers as possible in ATA
Kconfig to improve compile test coverage, from me.
- Fixes to avoid compile time warnings (W=1) and sparse warnings in
sata_fsl and ahci_xgene drivers, from me.
- Fix the interface of the read_id() port operation method to clarify
that the data buffer passed as an argument is little endian. This
avoids sparse warnings in the pata_netcell, pata_it821x,
ahci_xgene, ahci_cevaxi and ahci_brcm drivers. From me.
- Small code cleanup in the pata_octeon_cf driver, from Minghao.
- Improved IRQ configuration code in pata_of_platform, from Lad.
- Simplified implementation of __ata_scsi_queuecmd(), from Wenchao.
- Debounce delay flag renaming, from Paul.
- Add support for AMD A85 FCH (Hudson D4) AHCI adapters, from Paul"
* tag 'ata-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (106 commits)
ata: pata_ali: remove redundant return statement
ata: ahci: Add support for AMD A85 FCH (Hudson D4)
ata: libata: Rename link flag ATA_LFLAG_NO_DB_DELAY
ata: libata-scsi: simplify __ata_scsi_queuecmd()
ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
ata: pata_samsung_cf: add compile test support
ata: pata_pxa: add compile test support
ata: pata_imx: add compile test support
ata: pata_ftide010: add compile test support
ata: pata_cs5535: add compile test support
ata: pata_octeon_cf: remove redundant val variable
ata: fix read_id() ata port operation interface
ata: ahci_xgene: use correct type for port mmio address
ata: sata_fsl: fix cmdhdr_tbl_entry and prde struct definitions
ata: sata_fsl: fix scsi host initialization
ata: pata_bk3710: add compile test support
ata: ahci_seattle: add compile test support
ata: ahci_xgene: add compile test support
ata: ahci_tegra: add compile test support
ata: ahci_sunxi: add compile test support
...
Linus Torvalds [Tue, 18 Jan 2022 08:05:48 +0000 (10:05 +0200)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
Linus Torvalds [Tue, 18 Jan 2022 07:32:34 +0000 (09:32 +0200)]
Merge tag 'rproc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for controlling the Cortex R7 co-processor in
Renesas Gen3, support for R5F clusters and C71x DSPs on TI J721S2 and
compute, audio and modem subsystems on Qualcomm SM6350.
It fixes a couple of sparse errors related to memcpy_to/fromio and
corrects the kerneldoc spelling of "Return:".
The stm32 driver no longer attempts to communicate with the remote
after the firmware has crashed"
* tag 'rproc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
remoteproc: stm32: Improve crash recovery time
remoteproc: rcar_rproc: Remove trailing semicolon
remoteproc: rcar_rproc: Fix pm_runtime_get_sync error check
remoteproc: qcom: pas: Add SM6350 CDSP support
remoteproc: qcom: pas: Add SM6350 ADSP support
remoteproc: qcom: pas: Add SM6350 MPSS support
dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss
remoteproc: qcom: pas: Add missing power-domain "mxc" for CDSP
remoteproc: imx_rproc: correct firmware reload
remoteproc: qcom: pil_info: Don't memcpy_toio more than is provided
remoteproc: Add Renesas rcar driver
dt-bindings: remoteproc: Add Renesas R-Car
remoteproc: Fix remaining wrong return formatting in documentation
MAINTAINERS: Removing Ohad from remoteproc/rpmsg maintenance
remoteproc: ingenic: Request IRQ disabled
remoteproc: k3-r5: Extend support for R5F clusters on J721S2 SoCs
remoteproc: k3-dsp: Extend support for C71x DSPs on J721S2 SoCs
dt-bindings: remoteproc: k3-dsp: Update bindings for J721S2 SoCs
dt-bindings: remoteproc: k3-r5f: Update bindings for J721S2 SoCs
remoteproc: coredump: Correct argument 2 type for memcpy_fromio
...
Linus Torvalds [Tue, 18 Jan 2022 07:27:40 +0000 (09:27 +0200)]
Merge tag 'rpmsg-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This adds pr_fmt for the rpmsg_char driver, fixes error handling in
rpmsg_dev_probe() and corrects the spelling of "Return:" in various
places, in order to fix kerneldoc"
* tag 'rpmsg-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: core: Clean up resources on announce_create failure.
rpmsg: Fix documentation return formatting
rpmsg: char: Add pr_fmt() to prefix messages
vfs: fs_context: fix up param length parsing in legacy_parse_param
The "PAGE_SIZE - 2 - size" calculation in legacy_parse_param() is an
unsigned type so a large value of "size" results in a high positive
value instead of a negative value as expected. Fix this by getting rid
of the subtraction.
Signed-off-by: Jamie Hill-Daniel <jamie@hill-daniel.co.uk> Signed-off-by: William Liu <willsroot@protonmail.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 18 Jan 2022 07:13:30 +0000 (09:13 +0200)]
Merge tag 'pm-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"This is a continuation of the rework of device power management macros
used for declaring device power management callbacks (Paul Cercueil)"
* tag 'pm-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
iio: pressure: bmp280: Use new PM macros
PM: runtime: Add EXPORT[_GPL]_RUNTIME_DEV_PM_OPS macros
PM: runtime: Add DEFINE_RUNTIME_DEV_PM_OPS() macro
PM: core: Add EXPORT[_GPL]_SIMPLE_DEV_PM_OPS macros
PM: core: Remove static qualifier in DEFINE_SIMPLE_DEV_PM_OPS macro
PM: core: Remove DEFINE_UNIVERSAL_DEV_PM_OPS() macro
Linus Torvalds [Tue, 18 Jan 2022 06:51:51 +0000 (08:51 +0200)]
Merge tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"The most significant item here is the Platform Firmware Runtime Update
and Telemetry (PFRUT) support designed to allow certain pieces of the
platform firmware to be updated on the fly, among other things.
Also important is the e820 handling change on x86 that should work
around PCI BAR allocation issues on some systems shipping since 2019.
The rest is just a handful of assorted fixes and cleanups on top of
the ACPI material merged previously.
Specifics:
- Add support for the the Platform Firmware Runtime Update and
Telemetry (PFRUT) interface based on ACPI to allow certain pieces
of the platform firmware to be updated without restarting the
system and to provide a mechanism for collecting platform firmware
telemetry data (Chen Yu, Dan Carpenter, Yang Yingliang).
- Ignore E820 reservations covering PCI host bridge windows on
sufficiently recent x86 systems to avoid issues with allocating PCI
BARs on systems where the E820 reservations cover the entire PCI
host bridge memory window returned by the _CRS object in the
system's ACPI tables (Hans de Goede).
- Fix and clean up acpi_scan_init() (Rafael Wysocki).
- Add more sanity checking to ACPI SPCR tables parsing (Mark
Langsdorf).
- Drop unnecessary "static" from the ACPI PCC address space handling
driver added recently (kernel test robot)"
* tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCC: pcc_ctx can be static
ACPI: scan: Rename label in acpi_scan_init()
ACPI: scan: Simplify initialization of power and sleep buttons
ACPI: scan: Change acpi_scan_init() return value type to void
ACPI: SPCR: check if table->serial_port.access_width is too wide
ACPI: APD: Check for NULL pointer after calling devm_ioremap()
x86/PCI: Ignore E820 reservations for bridge windows on newer systems
ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
ACPI: pfr_update: Fix return value check in pfru_write()
ACPI: tools: Introduce utility for firmware updates/telemetry
ACPI: Introduce Platform Firmware Runtime Telemetry driver
ACPI: Introduce Platform Firmware Runtime Update device driver
efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
Linus Torvalds [Tue, 18 Jan 2022 04:40:47 +0000 (06:40 +0200)]
Merge tag 'slab-for-5.17-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull more slab updates from Vlastimil Babka:
"Finish the conversion to struct slab by removing slab-specific fields
from struct page.
The first slab update (see merge commit 9359c2a4ddd4) did most of the
conversion, but there was also series in iommu tree removing the
iommu's usage of struct page 'freelist' field, blocking the final
struct page cleanup.
Now that the iommu changes have been merged, we can finish the job"
* tag 'slab-for-5.17-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: Remove slab from struct page
Linus Torvalds [Tue, 18 Jan 2022 04:36:35 +0000 (06:36 +0200)]
Merge tag 'arc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"Nothing too exciting for now"
* tag 'arc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: use swap() to make code cleaner
arc: perf: Move static structs to where they're really used
ARC: perf: fix misleading comment about pmu vs counter stop
arc: Replace lkml.org links with lore
ARC: perf: Remove redundant initialization of variable idx
ARC: thread_info.h: correct two typos in a comment
Linus Torvalds [Tue, 18 Jan 2022 04:32:11 +0000 (06:32 +0200)]
Merge tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Add 'trace' subcommand for 'perf ftrace', setting the stage for
more 'perf ftrace' subcommands. Not using a subcommand yields the
previous behaviour of 'perf ftrace'.
- Add 'latency' subcommand to 'perf ftrace', that can use the
function graph tracer or a BPF optimized one, via the -b/--use-bpf
option.
E.g.:
$ sudo perf ftrace latency -a -T mutex_lock sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 4596 | ######################## |
1 - 2 us | 1680 | ######### |
2 - 4 us | 1106 | ##### |
4 - 8 us | 546 | ## |
8 - 16 us | 562 | ### |
16 - 32 us | 1 | |
32 - 64 us | 0 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
The original implementation of this command was in the bcc tool.
- Support --cputype option for hybrid events in 'perf stat'.
Improvements:
- Call chain improvements for ARM64.
- No need to do any affinity setup when profiling pids.
- Reduce multiplexing with duration_time in 'perf stat' metrics.
- Improve error message for uncore events, stating that some event
groups are can only be used in system wide (-a) mode.
- perf stat metric group leader fixes/improvements, including arch
specific changes to better support Intel topdown events.
- Probe non-deprecated sysfs path first, i.e. try the path
/sys/devices/system/cpu/cpuN/topology/thread_siblings first, then
the old /sys/devices/system/cpu/cpuN/topology/core_cpus.
- Disable debuginfod by default in 'perf record', to avoid stalls on
distros such as Fedora 35.
- Use unbuffered output in 'perf bench' when pipe/tee'ing to a file.
- Enable ignore_missing_thread in 'perf trace'
Fixes:
- Avoid TUI crash when navigating in the annotation of recursive
functions.
- Fix hex dump character output in 'perf script'.
- Fix JSON indentation to 4 spaces standard in the ARM vendor event
files.
- Fix use after free in metric__new().
- Fix IS_ERR_OR_NULL() usage in the perf BPF loader.
- Fix up cross-arch register support, i.e. when printing register
names take into account the architecture where the perf.data file
was collected.
- Fix SMT fallback with large core counts.
- Don't lower case MetricExpr when parsing JSON files so as not to
lose info such as the ":G" event modifier in metrics.
perf test:
- Add basic stress test for sigtrap handling to 'perf test'.
- Fix 'perf test' failures on s/390
- Enable system wide for metricgroups test in 'perf test´.
- Use 3 digits for test numbering now we can have more tests.
Arch specific:
- Add events for Arm Neoverse N2 in the ARM JSON vendor event files
- Support PERF_MEM_LVLNUM encodings in powerpc, that came from a
single patch series, where I incorrectly merged the kernel bits,
that were then reverted after coordination with Michael Ellerman
and Stephen Rothwell.
- Add ARM SPE total latency as PERF_SAMPLE_WEIGHT.
- Update AMD documentation, with info on raw event encoding.
- Add support for global and local variants of the "p_stage_cyc" sort
key, applicable to perf.data files collected on powerpc.
- Remove duplicate and incorrect aux size checks in the ARM CoreSight
ETM code.
Refactorings:
- Add a perf_cpu abstraction to disambiguate CPUs and CPU map
indexes, fixing problems along the way.
- Document CPU map methods.
UAPI sync:
- Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench
mem memcpy'
- Sync UAPI files with the kernel sources: drm, msr-index,
cpufeatures.
Build system
- Enable warnings through HOSTCFLAGS.
- Drop requirement for libstdc++.so for libopencsd check
libperf:
- Make libperf adopt perf_counts_values__scale() from tools/perf/util/.
- Add a stat multiplexing test to libperf"
* tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (115 commits)
perf record: Disable debuginfod by default
perf evlist: No need to do any affinity setup when profiling pids
perf cpumap: Add is_dummy() method
perf metric: Fix metric_leader
perf cputopo: Fix CPU topology reading on s/390
perf metricgroup: Fix use after free in metric__new()
libperf tests: Update a use of the new cpumap API
perf arm: Fix off-by-one directory path
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Update tools's copy of drm.h header
tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
perf pmu-events: Don't lower case MetricExpr
perf expr: Add debug logging for literals
perf tools: Probe non-deprecated sysfs path 1st
perf tools: Fix SMT fallback with large core counts
perf cpumap: Give CPUs their own type
perf stat: Correct first_shadow_cpu to return index
perf script: Fix flipped index and cpu
perf c2c: Use more intention revealing iterator
...
Linus Torvalds [Tue, 18 Jan 2022 04:26:50 +0000 (06:26 +0200)]
Merge tag 'for-linus-5.17-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs fixes from Mike Marshall:
"Two fixes:
- Fix the size of a memory allocation in orangefs_bufmap_alloc()
(Christophe JAILLET)
- Use default_groups in kobj_type (Greg KH)"
* tag 'for-linus-5.17-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: Fix the size of a memory allocation in orangefs_bufmap_alloc()
orangefs: use default_groups in kobj_type
Merge support for the Platform Firmware Runtime Update and Telemetry
interface based on ACPI.
The interface provided here allows updating certain pieces of the
platform firmware without restarting the system and collecting
platform firmware telemetry data.
This also includes a utility for accesing the new interface from user
space.
* acpi-pfrut:
ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
ACPI: pfr_update: Fix return value check in pfru_write()
ACPI: tools: Introduce utility for firmware updates/telemetry
ACPI: Introduce Platform Firmware Runtime Telemetry driver
ACPI: Introduce Platform Firmware Runtime Update device driver
efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
Merge branches 'acpi-x86', 'acpi-tables', 'acpi-soc' and 'acpi-pcc'
Merge additional ACPI-related updates for 5.17-rc1:
- Ignore E820 reservations covering PCI host bridge windows on
sufficiently recent x86 systems to avoid issues with allocating
PCI BARs on systems where the E820 reservations cover the entire
PCI host bridge memory window returned by the _CRS object in the
system's ACPI tables (Hans de Goede).
- Add more sanity checking to ACPI SPCR tables parsing (Mark
Langsdorf).
Linus Torvalds [Mon, 17 Jan 2022 07:53:21 +0000 (09:53 +0200)]
Merge tag '5.17-rc-part1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- multichannel patches mostly related to improving reconnect behavior
- minor cleanup patches
* tag '5.17-rc-part1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix FILE_BOTH_DIRECTORY_INFO definition
cifs: move superblock magic defitions to magic.h
cifs: Fix smb311_update_preauth_hash() kernel-doc comment
cifs: avoid race during socket reconnect between send and recv
cifs: maintain a state machine for tcp/smb/tcon sessions
cifs: fix hang on cifs_get_next_mid()
cifs: take cifs_tcp_ses_lock for status checks
cifs: reconnect only the connection and not smb session where possible
cifs: add WARN_ON for when chan_count goes below minimum
cifs: adjust DebugData to use chans_need_reconnect for conn status
cifs: use the chans_need_reconnect bitmap for reconnect status
cifs: track individual channel status using chans_need_reconnect
cifs: remove redundant assignment to pointer p
NeilBrown [Sun, 16 Jan 2022 22:07:26 +0000 (09:07 +1100)]
devtmpfs regression fix: reconfigure on each mount
Prior to Linux v5.4 devtmpfs used mount_single() which treats the given
mount options as "remount" options, so it updates the configuration of
the single super_block on each mount.
Since that was changed, the mount options used for devtmpfs are ignored.
This is a regression which affect systemd - which mounts devtmpfs with
"-o mode=755,size=4m,nr_inodes=1m".
This patch restores the "remount" effect by calling reconfigure_single()
Fixes: 2522a1756cda ("devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single()") Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 17 Jan 2022 06:48:09 +0000 (08:48 +0200)]
Merge tag 'fbdev-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev maintainership update from Helge Deller:
"The fbdev layer is orphaned, but seems to need some care. So I'd like
to step up as new maintainer"
* tag 'fbdev-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
MAINTAINERS: Add Helge as fbdev maintainer
Linus Torvalds [Mon, 17 Jan 2022 06:27:55 +0000 (08:27 +0200)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"Updates to Goodix touchscreen driver (addition of pen support) and
Silead touchscreen driver (also addition of pen support and parsing of
embedded firmware to determine screen size), along with assorted fixes
for other drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - fix a typo in a comment
Input: zinitix - add compatible for bt532
Input: zinitix - handle proper supply names
dt-bindings: input/ts/zinitix: Convert to YAML, fix and extend
Input: axp20x-pek - revert "always register interrupt handlers" change
Input: gpio-keys - avoid clearing twice some memory
Input: byd - fix typo in a comment
Input: ucb1400_ts - remove redundant variable penup
Input: ti_am335x_tsc - lower the X and Y sampling time
Input: ti_am335x_tsc - fix STEPCONFIG setup for Z2
Input: ti_am335x_tsc - set ADCREFM for X configuration
Input: silead - add pen support
Input: silead - add support for EFI-embedded fw using different min/max coordinates
Input: goodix - 2 small fixes for pen support
Input: goodix - improve gpiod_get() error logging
Input: goodix - add pen support
Input: ff-core - correct magnitude setting for rumble compatibility
Input: palmas-pwrbutton - make a couple of arrays static const
Input: wacom_i2c - clean up the query device fields
Input: palmas-pwrbutton - use bitfield helpers
Linus Torvalds [Mon, 17 Jan 2022 06:20:28 +0000 (08:20 +0200)]
Merge tag 'i3c/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Mostly non urgent fixes and a few improvements (including runtime pm
suport) to the Silvaco driver"
* tag 'i3c/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw: check return of dw_i3c_master_get_free_pos()
i3c: master: mipi-i3c-hci: correct the config reference for endianness
i3c: master: svc: enable the interrupt in the enable ibi function
i3c: master: svc: add the missing module device table
i3c: master: svc: add runtime pm support
i3c: master: svc: set ODSTOP to let I2C device see the STOP signal
i3c: master: svc: add support for slave to stop returning data
i3c: master: svc: separate err, fifo and disable interrupt of reset function
i3c: master: svc: fix atomic issue
i3c: master: svc: move module reset behind clk enable
i3c/master/mipi-i3c-hci: Fix a potentially infinite loop in 'hci_dat_v1_get_index()'
i3c: fix incorrect address slot lookup on 64-bit
i3c/master/mipi-i3c-hci: Prefer kcalloc over open coded arithmetic
i3c/master/mipi-i3c-hci: Prefer struct_size over open coded arithmetic
Linus Torvalds [Mon, 17 Jan 2022 06:14:18 +0000 (08:14 +0200)]
Merge tag 'ntb-5.17' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"New AMD PCI ID for NTB, and a number of bug fixes for ntb_hw_switchtec
for Linux v5.17"
* tag 'ntb-5.17' of git://github.com/jonmason/ntb:
ntb_hw_switchtec: Fix a minor issue in config_req_id_table()
ntb_hw_switchtec: Remove code for disabling ID protection
ntb_hw_switchtec: Update the way of getting VEP instance ID
ntb_hw_switchtec: AND with the part_map for a valid tpart_vec
ntb_hw_switchtec: Fix bug with more than 32 partitions
ntb_hw_switchtec: Fix pff ioread to read into mmio_part_cfg_all
ntb_hw_switchtec: fix the spelling of "its"
NTB/msi: Fix ntbm_msi_request_threaded_irq() kernel-doc comment
ntb_hw_amd: Add NTB PCI ID for new gen CPU
Linus Torvalds [Mon, 17 Jan 2022 06:07:57 +0000 (08:07 +0200)]
Merge tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- New device support:
- Watchdog Timer driver for RZ/G2L
- Realtek Otto watchdog timer
- Apple SoC watchdog driver
- Fintek F81966
- Remove BCM63XX_WDT after support for this SoC was added to
BCM7038_WDT
- Improvements of the BCM7038_WDT and s3c2410_wdt code
- Several other fixes and improvements
* tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
watchdog: msc313e: Check if the WDT was running at boot
watchdog: Add Apple SoC watchdog driver
dt-bindings: watchdog: Add SM6350 and SM8250 compatible
watchdog: s3c2410: Fix getting the optional clock
watchdog: s3c2410: Use platform_get_irq() to get the interrupt
dt-bindings: watchdog: atmel: Add missing 'interrupts' property
watchdog: mtk_wdt: use platform_get_irq_optional
watchdog: Add Watchdog Timer driver for RZ/G2L
dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L
watchdog: da9063: Add hard dependency on I2C
watchdog: Add Realtek Otto watchdog timer
dt-bindings: watchdog: Realtek Otto WDT binding
watchdog: s3c2410: Add Exynos850 support
watchdog: da9063: use atomic safe i2c transfer in reset handler
watchdog: davinci: Use div64_ul instead of do_div
watchdog: Remove BCM63XX_WDT
MIPS: BCM63XX: Provide platform data to watchdog device
watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt
watchdog: Allow building BCM7038_WDT for BCM63XX
watchdog: bcm7038_wdt: Support platform data configuration
...
Linus Torvalds [Mon, 17 Jan 2022 06:00:56 +0000 (08:00 +0200)]
Merge branch 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"Remove some semantic patches and remove a maintainer.
Qing Wang <wangqing@vivo.com> reported that fen.cocci mostly finds
false positives, so it is dropped.
scripts/coccinelle/iterators/for_each_child.cocci also subsumes it, in
a more correct way.
Matthew Wilcox <willy@infradead.org> reported that bugon.cocci mostly
gives false positives. It is an old script and was designed to be
inaccurate to maximally cover problems, but most of what it is useful
for has been done already.
Gilles Muller passed away and is thus dropped from the maintainers
list"
* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
drop fen.cocci
scripts/coccinelle: drop bugon.cocci
MAINTAINERS: remove Gilles Muller
Linus Torvalds [Mon, 17 Jan 2022 05:32:51 +0000 (07:32 +0200)]
Merge branch 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The biggest change here is in-kernel support for module decompression.
This change is being made to help support LSMs like LoadPin as
otherwise it loses link between the source of kernel module on the
disk and binary blob that is being loaded into the kernel.
kmod decompression is still done by userspace even with this is done,
both because there are no measurable gains in not doing so and as it
adds a secondary extra check for validating the module before loading
it into the kernel.
The rest of the changes are minor, the only other change worth
mentionin there is Jessica Yu is now bowing out of maintenance of
modules as she's taking a break from work.
While there were other changes posted for modules, those have not yet
received much review of testing so I'm not yet comfortable in merging
any of those changes yet."
* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: fix signature check failures when using in-kernel decompression
kernel: Fix spelling mistake "compresser" -> "compressor"
MAINTAINERS: add mailing lists for kmod and modules
module.h: allow #define strings to work with MODULE_IMPORT_NS
module: add in-kernel support for decompressing
MAINTAINERS: Remove myself as modules maintainer
module: Remove outdated comment
Linus Torvalds [Mon, 17 Jan 2022 05:26:43 +0000 (07:26 +0200)]
unicode: fix .gitignore for generated utfdata file
Commit 4c4041b3059a ("unicode: Add utf8-data module") changed the
generated utf8data file from 'utf8data.h' to 'utf8data.c', but didn't
change the comments or the .gitignore to match.
The comments should be updated too, but at least they don't cause any
visible breakage. But the gitignore file needs changing to avoid git
complaining about untracked files.
Linus Torvalds [Mon, 17 Jan 2022 03:49:30 +0000 (05:49 +0200)]
Merge branch 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
Linus Torvalds [Mon, 17 Jan 2022 03:40:02 +0000 (05:40 +0200)]
Merge tag 'unicode-for-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode updates from Gabriel Krisman Bertazi:
"This includes patches from Christoph Hellwig to split the large data
tables of the unicode subsystem into a loadable module, which allow
users to not have them around if case-insensitive filesystems are not
to be used. It also includes minor code fixes to unicode and its
users, from the same author.
All the patches here have been on linux-next releases for the past
months"
* tag 'unicode-for-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: only export internal symbols for the selftests
unicode: Add utf8-data module
unicode: cache the normalization tables in struct unicode_map
unicode: move utf8cursor to utf8-selftest.c
unicode: simplify utf8len
unicode: remove the unused utf8{,n}age{min,max} functions
unicode: pass a UNICODE_AGE() tripple to utf8_load
unicode: mark the version field in struct unicode_map unsigned
unicode: remove the charset field from struct unicode_map
f2fs: simplify f2fs_sb_read_encoding
ext4: simplify ext4_sb_read_encoding
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
Linus Torvalds [Sun, 16 Jan 2022 13:53:00 +0000 (15:53 +0200)]
Merge tag 'hyperv-next-signed-20220114' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- More patches for Hyper-V isolation VM support (Tianyu Lan)
- Bug fixes and clean-up patches from various people
* tag 'hyperv-next-signed-20220114' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
scsi: storvsc: Fix storvsc_queuecommand() memory leak
x86/hyperv: Properly deal with empty cpumasks in hyperv_flush_tlb_multi()
Drivers: hv: vmbus: Initialize request offers message for Isolation VM
scsi: storvsc: Fix unsigned comparison to zero
swiotlb: Add CONFIG_HAS_IOMEM check around swiotlb_mem_remap()
x86/hyperv: Fix definition of hv_ghcb_pg variable
Drivers: hv: Fix definition of hypercall input & output arg variables
net: netvsc: Add Isolation VM support for netvsc driver
scsi: storvsc: Add Isolation VM support for storvsc driver
hyper-v: Enable swiotlb bounce buffer for Isolation VM
x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
swiotlb: Add swiotlb bounce buffer remap function for HV IVM
Linus Torvalds [Sun, 16 Jan 2022 08:15:32 +0000 (10:15 +0200)]
Merge tag 'trace-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New:
- The Real Time Linux Analysis (RTLA) tool is added to the tools
directory.
- Can safely filter on user space pointers with: field.ustring ~
"match-string"
- eprobes can now be filtered like any other event.
- trace_marker(_raw) now uses stream_open() to allow multiple threads
to safely write to it. Note, this could possibly break existing
user space, but we will not know until we hear about it, and then
can revert the change if need be.
- New field in events to display when bottom halfs are disabled.
- Sorting of the ftrace functions are now done at compile time
instead of at bootup.
Infrastructure changes to support future efforts:
- Added __rel_loc type for trace events. Similar to __data_loc but
the offset to the dynamic data is based off of the location of the
descriptor and not the beginning of the event. Needed for user
defined events.
- Some simplification of event trigger code.
- Make synthetic events process its callback better to not hinder
other event callbacks that are registered. Needed for user defined
events.
And other small fixes and cleanups"
* tag 'trace-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
tracing: Add ustring operation to filtering string pointers
rtla: Add rtla timerlat hist documentation
rtla: Add rtla timerlat top documentation
rtla: Add rtla timerlat documentation
rtla: Add rtla osnoise hist documentation
rtla: Add rtla osnoise top documentation
rtla: Add rtla osnoise man page
rtla: Add Documentation
rtla/timerlat: Add timerlat hist mode
rtla: Add timerlat tool and timelart top mode
rtla/osnoise: Add the hist mode
rtla/osnoise: Add osnoise top mode
rtla: Add osnoise tool
rtla: Helper functions for rtla
rtla: Real-Time Linux Analysis tool
tracing/osnoise: Properly unhook events if start_per_cpu_kthreads() fails
tracing: Remove duplicate warnings when calling trace_create_file()
tracing/kprobes: 'nmissed' not showed correctly for kretprobe
tracing: Add test for user space strings when filtering on string pointers
tracing: Have syscall trace events use trace_event_buffer_lock_reserve()
...
Linus Torvalds [Sun, 16 Jan 2022 08:08:13 +0000 (10:08 +0200)]
Merge tag 'livepatching-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Correctly handle kobjects when a livepatch init fails
- Avoid CPU hogging when searching for many livepatched symbols
- Add livepatch API page into documentation
* tag 'livepatching-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Avoid CPU hogging with cond_resched
livepatch: Fix missing unlock on error in klp_enable_patch()
livepatch: Fix kobject refcount bug on klp_init_patch_early failure path
Documentation: livepatch: Add livepatch API page
Linus Torvalds [Sun, 16 Jan 2022 06:08:11 +0000 (08:08 +0200)]
Merge tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use pci_find_vsec_capability() instead of open-coding it (Andy
Shevchenko)
- Convert pci_dev_present() stub from macro to static inline to avoid
'unused variable' errors (Hans de Goede)
- Convert sysfs slot attributes from default_attrs to default_groups
(Greg Kroah-Hartman)
- Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum
(Rajat Jain)
- Remove unnecessary initialization of static variables (Longji Guo)
Resource management:
- Always write Intel I210 ROM BAR on update to work around device
defect (Bjorn Helgaas)
PCIe native device hotplug:
- Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede)
- Fix infinite loop in pciehp IRQ handler on power fault (Lukas
Wunner)
Power management:
- Convert amd64-agp, sis-agp, via-agp from legacy PCI power
management to generic power management (Vaibhav Gupta)
IOMMU:
- Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
so it can work with an IOMMU (Yifeng Li)
Error handling:
- Add PCI_ERROR_RESPONSE and related definitions for signaling and
checking for transaction errors on PCI (Naveen Naidu)
- Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers,
instead of in host controller drivers, when transactions fail on
PCI (Naveen Naidu)
- Use PCI_POSSIBLE_ERROR() to check for possible failure of config
reads (Naveen Naidu)
ASPM:
- Calculate link L0s and L1 exit latencies when needed instead of
caching them (Saheed O. Bolarinwa)
- Calculate device L0s and L1 acceptable exit latencies when needed
instead of caching them (Saheed O. Bolarinwa)
- Remove struct aspm_latency since it's no longer needed (Saheed O.
Bolarinwa)
APM X-Gene PCIe controller driver:
- Fix IB window setup, which was broken by the fact that IB resources
are now sorted in address order instead of DT dma-ranges order (Rob
Herring)
Apple PCIe controller driver:
- Enable clock gating to save power (Hector Martin)
- Fix REFCLK1 enable/poll logic (Hector Martin)
Broadcom STB PCIe controller driver:
- Declare bitmap correctly for use by bitmap interfaces (Christophe
JAILLET)
- Clean up computation of legacy and non-legacy MSI bitmasks (Florian
Fainelli)
- Update suspend/resume/remove error handling to warn about errors
and not fail the operation (Jim Quinlan)
- Correct the "pcie" and "msi" interrupt descriptions in DT binding
(Jim Quinlan)
- Add DT bindings for endpoint voltage regulators (Jim Quinlan)
- Split brcm_pcie_setup() into two functions (Jim Quinlan)
- Add mechanism for turning on voltage regulators for connected
devices (Jim Quinlan)
- Turn voltage regulators for connected devices on/off when bus is
added or removed (Jim Quinlan)
- When suspending, don't turn off voltage regulators for wakeup
devices (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Use DWC common ops instead of layerscape-specific link-up functions
(Hou Zhiqiang)
Intel VMD host bridge driver:
- Honor platform ACPI _OSC feature negotiation for Root Ports below
VMD (Kai-Heng Feng)
- Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan)
- Reset everything below VMD before enumerating to work around
failure to enumerate NVMe devices when guest OS reboots (Nirmal
Patel)
Bridge emulation (used by Marvell Aardvark and MVEBU):
- Make emulated ROM BAR read-only by default (Pali RohĂ¡r)
- Make some emulated legacy PCI bits read-only for PCIe devices (Pali
RohĂ¡r)
- Update reserved bits in emulated PCIe Capability (Pali RohĂ¡r)
- Allow drivers to emulate different PCIe Capability versions (Pali
RohĂ¡r)
- Set emulated Capabilities List bit for all PCIe devices, since they
must have at least a PCIe Capability (Pali RohĂ¡r)
Marvell Aardvark PCIe controller driver:
- Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2,
DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali
RohĂ¡r)
- Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2
registers (Pali RohĂ¡r)
- Clear all MSIs at setup to avoid spurious interrupts (Pali RohĂ¡r)
- Disable bus mastering when unbinding host controller driver (Pali
RohĂ¡r)
- Mask all interrupts when unbinding host controller driver (Pali
RohĂ¡r)
- Fix memory leak in host controller unbind (Pali RohĂ¡r)
- Assert PERST# when unbinding host controller driver (Pali RohĂ¡r)
- Disable link training when unbinding host controller driver (Pali
RohĂ¡r)
- Disable common PHY when unbinding host controller driver (Pali
RohĂ¡r)
- Fix resource type checking to check only IORESOURCE_MEM, not
IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali RohĂ¡r)
Marvell MVEBU PCIe controller driver:
- Implement pci_remap_iospace() for ARM so mvebu can use
devm_pci_remap_iospace() instead of the previous ARM-specific
pci_ioremap_io() interface (Pali RohĂ¡r)
- Use the standard pci_host_probe() instead of the device-specific
mvebu_pci_host_probe() (Pali RohĂ¡r)
- Replace all uses of ARM-specific pci_ioremap_io() with the ARM
implementation of the standard pci_remap_iospace() interface and
remove pci_ioremap_io() (Pali RohĂ¡r)
- Skip initializing invalid Root Ports (Pali RohĂ¡r)
- Check for errors from pci_bridge_emul_init() (Pali RohĂ¡r)
- Ignore any bridges at non-zero function numbers (Pali RohĂ¡r)
- Return ~0 data for invalid config read size (Pali RohĂ¡r)
- Disallow mapping interrupts on emulated bridges (Pali RohĂ¡r)
- Clear Root Port Memory & I/O Space Enable and Bus Master Enable at
initialization (Pali RohĂ¡r)
- Make type bits in Root Port I/O Base register read-only (Pali
RohĂ¡r)
- Disable Root Port windows when base/limit set to invalid values
(Pali RohĂ¡r)
- Set controller to Root Complex mode (Pali RohĂ¡r)
- Set Root Port Class Code to PCI Bridge (Pali RohĂ¡r)
- Update emulated Root Port secondary bus numbers to better reflect
the actual topology (Pali RohĂ¡r)
- Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so
pci_reset_secondary_bus() can reset connected devices (Pali RohĂ¡r)
- Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root
Ports (Pali RohĂ¡r)
- Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports
(Pali RohĂ¡r)
- Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on
Armada XP and newer devices (Pali RohĂ¡r)
- Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module
(Pali RohĂ¡r)
- Add support for compiling as a module (Pali RohĂ¡r)
MediaTek PCIe controller driver:
- Assert PERST# for 100ms to allow power and clock to stabilize
(qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Disable Mediatek DVFSRC voltage request since lack of DVFSRC to
respond to the request causes failure to exit L1 PM Substate
(Jianjun Wang)
MediaTek MT7621 PCIe controller driver:
- Declare mt7621_pci_ops static (Sergio Paracuellos)
- Give pcibios_root_bridge_prepare() access to host bridge windows
(Sergio Paracuellos)
- Move MIPS I/O coherency unit setup from driver to
pcibios_root_bridge_prepare() (Sergio Paracuellos)
- Add missing MODULE_LICENSE() (Sergio Paracuellos)
- Allow COMPILE_TEST for all arches (Sergio Paracuellos)
Microsoft Hyper-V host bridge driver:
- Add hv-internal interfaces to encapsulate arch IRQ dependencies
(Sunil Muthuswamy)
- Add arm64 Hyper-V vPCI support (Sunil Muthuswamy)
Qualcomm PCIe controller driver:
- Undo PM setup in qcom_pcie_probe() error handling path (Christophe
JAILLET)
- Use __be16 type to store return value from cpu_to_be16()
(Manivannan Sadhasivam)
- Constify static dw_pcie_ep_ops (Rikard Falkeborn)
Renesas R-Car PCIe controller driver:
- Fix aarch32 abort handler so it doesn't check the wrong bus clock
before accessing the host controller (Marek Vasut)
TI Keystone PCIe controller driver:
- Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode
DT properties (Kishon Vijay Abraham I)
MicroSemi Switchtec management driver:
- Add Gen4 automotive device IDs (Kelvin Cao)
- Declare state_names[] as static so it's not allocated and
initialized for every call (Kelvin Cao)
Host controller driver cleanups:
- Use of_device_get_match_data(), not of_match_device(), when we only
need the device data in altera, artpec6, cadence, designware-plat,
dra7xx, keystone, kirin (Fan Fei)
- Drop pointless of_device_get_match_data() cast in j721e (Bjorn
Helgaas)
- Drop redundant struct device * from j721e since struct cdns_pcie
already has one (Bjorn Helgaas)
- Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4,
mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier,
xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei)
- Fix invalid address space conversions in hisi, spear13xx (Bjorn
Helgaas)
Miscellaneous:
- Sort Intel Device IDs by value (Andy Shevchenko)
- Change Capability offsets to hex to match spec (Baruch Siach)
- Correct misspellings (Krzysztof Wilczyński)
- Terminate statement with semicolon in pci_endpoint_test.c (Ming
Wang)"
* tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits)
PCI: mt7621: Allow COMPILE_TEST for all arches
PCI: mt7621: Add missing MODULE_LICENSE()
PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
PCI: Let pcibios_root_bridge_prepare() access bridge->windows
PCI: mt7621: Declare mt7621_pci_ops static
PCI: brcmstb: Do not turn off WOL regulators on suspend
PCI: brcmstb: Add control of subdevice voltage regulators
PCI: brcmstb: Add mechanism to turn on subdev regulators
PCI: brcmstb: Split brcm_pcie_setup() into two funcs
dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.
PCI: brcmstb: Fix function return value handling
PCI: brcmstb: Do not use __GENMASK
PCI: brcmstb: Declare 'used' as bitmap, not unsigned long
PCI: hv: Add arm64 Hyper-V vPCI support
PCI: hv: Make the code arch neutral by adding arch specific interfaces
PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
x86/PCI: Remove initialization of static variables to false
PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
misc: pci_endpoint_test: Terminate statement with semicolon
...
Linus Torvalds [Sun, 16 Jan 2022 05:54:11 +0000 (07:54 +0200)]
Merge tag 'exfat-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Fix ->i_blocks truncation issue that still exists elsewhere.
- Four cleanups & typos fixes.
- Move super block magic number to magic.h
- Fix missing REQ_SYNC in exfat_update_bhs().
* tag 'exfat-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix missing REQ_SYNC in exfat_update_bhs()
exfat: remove argument 'sector' from exfat_get_dentry()
exfat: move super block magic number to magic.h
exfat: fix i_blocks for files truncated over 4 GiB
exfat: reuse exfat_inode_info variable instead of calling EXFAT_I()
exfat: make exfat_find_location() static
exfat: fix typos in comments
exfat: simplify is_valid_cluster()
Linus Torvalds [Sun, 16 Jan 2022 05:42:58 +0000 (07:42 +0200)]
Merge tag 'nfsd-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Bruce has announced he is leaving Red Hat at the end of the month and
is stepping back from his role as NFSD co-maintainer. As a result,
this includes a patch removing him from the MAINTAINERS file.
There is one patch in here that Jeff Layton was carrying in the locks
tree. Since he had only one for this cycle, he asked us to send it to
you via the nfsd tree.
There continues to be 0-day reports from Robert Morris @MIT. This time
we include a fix for a crash in the COPY_NOTIFY operation.
Highlights:
- Bruce steps down as NFSD maintainer
- Prepare for dynamic nfsd thread management
- More work on supporting re-exporting NFS mounts
- One fs/locks patch on behalf of Jeff Layton
Notable bug fixes:
- Fix zero-length NFSv3 WRITEs
- Fix directory cinfo on FS's that do not support iversion
- Fix WRITE verifiers for stable writes
- Fix crash on COPY_NOTIFY with a special state ID"
* tag 'nfsd-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (51 commits)
SUNRPC: Fix sockaddr handling in svcsock_accept_class trace points
SUNRPC: Fix sockaddr handling in the svc_xprt_create_error trace point
fs/locks: fix fcntl_getlk64/fcntl_setlk64 stub prototypes
nfsd: fix crash on COPY_NOTIFY with special stateid
MAINTAINERS: remove bfields
NFSD: Move fill_pre_wcc() and fill_post_wcc()
Revert "nfsd: skip some unnecessary stats in the v4 case"
NFSD: Trace boot verifier resets
NFSD: Rename boot verifier functions
NFSD: Clean up the nfsd_net::nfssvc_boot field
NFSD: Write verifier might go backwards
nfsd: Add a tracepoint for errors in nfsd4_clone_file_range()
NFSD: De-duplicate net_generic(nf->nf_net, nfsd_net_id)
NFSD: De-duplicate net_generic(SVC_NET(rqstp), nfsd_net_id)
NFSD: Clean up nfsd_vfs_write()
nfsd: Replace use of rwsem with errseq_t
NFSD: Fix verifier returned in stable WRITEs
nfsd: Retry once in nfsd_open on an -EOPENSTALE return
nfsd: Add errno mapping for EREMOTEIO
nfsd: map EBADF
...
Linus Torvalds [Sun, 16 Jan 2022 05:36:49 +0000 (07:36 +0200)]
Merge tag '9p-for-5.17-rc1' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"Fixes, split 9p_net_fd, and new reviewer:
- fix possible uninitialized memory usage for setattr
- fix fscache reading hole in a file just after it's been grown
- split net/9p/trans_fd.c in its own module like other transports.
The new transport module defaults to 9P_NET and is autoloaded if
required so users should not be impacted
- add Christian Schoenebeck to 9p reviewers
- some more trivial cleanup"
* tag '9p-for-5.17-rc1' of git://github.com/martinetd/linux:
9p: fix enodata when reading growing file
net/9p: show error message if user 'msize' cannot be satisfied
MAINTAINERS: 9p: add Christian Schoenebeck as reviewer
9p: only copy valid iattrs in 9P2000.L setattr implementation
9p: Use BUG_ON instead of if condition followed by BUG.
net/p9: load default transports
9p/xen: autoload when xenbus service is available
9p/trans_fd: split into dedicated module
fs: 9p: remove unneeded variable
9p/trans_virtio: Fix typo in the comment for p9_virtio_create()
Linus Torvalds [Sun, 16 Jan 2022 04:52:38 +0000 (06:52 +0200)]
Merge tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"drivers fixes:
- i915 fixes for ttm backend + one pm wakelock fix
- amdgpu fixes, fairly big pile of small things all over. Note this
doesn't yet containe the fixed version of the otg sync patch that
blew up
- small driver fixes: meson, sun4i, vga16fb probe fix
drm core fixes:
- cma-buf heap locking
- ttm compilation
- self refresh helper state check
- wrong error message in atomic helpers
- mipi-dbi buffer mapping"
* tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm: (49 commits)
drm/mipi-dbi: Fix source-buffer address in mipi_dbi_buf_copy
drm: fix error found in some cases after the patch d1af5cd86997
drm/ttm: fix compilation on ARCH=um
dma-buf: cma_heap: Fix mutex locking section
video: vga16fb: Only probe for EGA and VGA 16 color graphic cards
drm/amdkfd: Fix ASIC name typos
drm/amdkfd: Fix DQM asserts on Hawaii
drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2
drm/amd/pm: only send GmiPwrDnControl msg on master die (v3)
drm/amdgpu: use spin_lock_irqsave to avoid deadlock by local interrupt
drm/amdgpu: not return error on the init_apu_flags
drm/amdkfd: Use prange->update_list head for remove_list
drm/amdkfd: Use prange->list head for insert_list
drm/amdkfd: make SPDX License expression more sound
drm/amdkfd: Check for null pointer after calling kmemdup
drm/amd/display: invalid parameter check in dmub_hpd_callback
Revert "drm/amdgpu: Don't inherit GEM object VMAs in child process"
drm/amd/display: reset dcn31 SMU mailbox on failures
drm/amdkfd: use default_groups in kobj_type
drm/amdgpu: use default_groups in kobj_type
...
Jiri Olsa [Thu, 9 Dec 2021 20:04:25 +0000 (21:04 +0100)]
perf record: Disable debuginfod by default
Fedora 35 sets DEBUGINFOD_URLS by default, which might lead to
unexpected stalls in perf record exit path, when we try to cache
profiled binaries.
# DEBUGINFOD_PROGRESS=1 ./perf record -a
^C[ perf record: Woken up 1 times to write data ]
Downloading from https://debuginfod.fedoraproject.org/ 447069
Downloading from https://debuginfod.fedoraproject.org/ 1502175
Downloading \^Z
Disabling DEBUGINFOD_URLS by default in perf record and adding
debuginfod option and .perfconfig variable support to enable id.
Default without debuginfo processing:
# perf record -a
Using system debuginfod setup:
# perf record -a --debuginfod
Using custom debuginfd url:
# perf record -a --debuginfod='https://evenbetterdebuginfodserver.krava'
Adding single perf_debuginfod_setup function and using
it also in perf buildid-cache command.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211209200425.303561-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Sat, 15 Jan 2022 06:28:52 +0000 (22:28 -0800)]
perf metric: Fix metric_leader
Multiple events may have a metric_leader to aggregate into.
This happens for uncore events where, for example, uncore_imc is
expanded into uncore_imc_0, uncore_imc_1, etc.
Such events all have the same metric_id and should aggregate into the
first event.
The change introducing metric_ids had a bug where the metric_id was
compared to itself, creating an always true condition.
Correct this by comparing the event in the metric_evlist and the
metric_leader.
Fixes: aa06c8d04cafa3c6 ("perf metric: Encode and use metric-id as qualifier") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20220115062852.1959424-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 15 Jan 2022 18:37:06 +0000 (20:37 +0200)]
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
Add the description of @server in smb311_update_preauth_hash()
kernel-doc comment to remove warning found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
fs/cifs/smb2misc.c:856: warning: Function parameter or member 'server'
not described in 'smb311_update_preauth_hash'
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Steve French <stfrench@microsoft.com>
SeongJae Park [Fri, 14 Jan 2022 22:10:50 +0000 (14:10 -0800)]
mm/damon: hide kernel pointer from tracepoint event
DAMON's virtual address spaces monitoring primitive uses 'struct pid *'
of the target process as its monitoring target id. The kernel address
is exposed as-is to the user space via the DAMON tracepoint,
'damon_aggregated'.
Though primarily only privileged users are allowed to access that, it
would be better to avoid unnecessarily exposing kernel pointers so.
Because the trace result is only required to be able to distinguish each
target, we aren't need to use the pointer as-is.
This makes the tracepoint to use the index of the target in the
context's targets list as its id in the tracepoint, to hide the kernel
space address.
SeongJae Park [Fri, 14 Jan 2022 22:10:47 +0000 (14:10 -0800)]
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
The failure log message for 'damon_va_three_regions()' prints the target
id, which is a 'struct pid' pointer in the case. To avoid exposing the
kernel pointer via the log, this makes the log to use the index of the
target in the context's targets list instead.
SeongJae Park [Fri, 14 Jan 2022 22:10:44 +0000 (14:10 -0800)]
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
Failure of 'damon_va_three_regions()' is logged using 'pr_err()'. But,
the function can fail in legal situations. To avoid making users be
surprised and to keep the kernel clean, this makes the log to be printed
using 'pr_debug()'.
SeongJae Park [Fri, 14 Jan 2022 22:10:41 +0000 (14:10 -0800)]
mm/damon/dbgfs: remove an unnecessary variable
Patch series "mm/damon: Hide unnecessary information disclosures".
DAMON is exposing some unnecessary information including kernel pointer
in kernel log and tracepoint. This patchset hides such information.
The first patch is only for a trivial cleanup, though.
This patch (of 4):
This commit removes a unnecessarily used variable in
dbgfs_target_ids_write().
Guoqing Jiang [Fri, 14 Jan 2022 22:10:38 +0000 (14:10 -0800)]
mm/damon: move the implementation of damon_insert_region to damon.h
Usually, inline function is declared static since it should sit between
storage and type. And implement it in a header file if used by multiple
files.
And this change also fixes compile issue when backport damon to 5.10.
mm/damon/vaddr.c: In function `damon_va_evenly_split_region':
./include/linux/damon.h:425:13: error: inlining failed in call to `always_inline' `damon_insert_region': function body not available
425 | inline void damon_insert_region(struct damon_region *r,
| ^~~~~~~~~~~~~~~~~~~
mm/damon/vaddr.c:86:3: note: called from here
86 | damon_insert_region(n, r, next, t);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Link: https://lkml.kernel.org/r/20211223085703.6142-1-guoqing.jiang@linux.dev Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baolin Wang [Fri, 14 Jan 2022 22:10:35 +0000 (14:10 -0800)]
mm/damon: add access checking for hugetlb pages
The process's VMAs can be mapped by hugetlb page, but now the DAMON did
not implement the access checking for hugetlb pte, so we can not get the
actual access count like below if a process VMAs were mapped by hugetlb.
SeongJae Park [Fri, 14 Jan 2022 22:10:29 +0000 (14:10 -0800)]
mm/damon/dbgfs: support all DAMOS stats
Currently, DAMON debugfs interface is not supporting DAMON-based
Operation Schemes (DAMOS) stats for schemes successfully applied regions
and time/space quota limit exceeds. This adds the support.
SeongJae Park [Fri, 14 Jan 2022 22:10:23 +0000 (14:10 -0800)]
mm/damon/reclaim: provide reclamation statistics
This implements new DAMON_RECLAIM parameters for statistics reporting.
Those can be used for understanding how DAMON_RECLAIM is working, and
for tuning the other parameters.
SeongJae Park [Fri, 14 Jan 2022 22:10:20 +0000 (14:10 -0800)]
mm/damon/schemes: account how many times quota limit has exceeded
If the time/space quotas of a given DAMON-based operation scheme is too
small, the scheme could show unexpectedly slow progress. However, there
is no good way to notice the case in runtime. This commit extends the
DAMOS stat to provide how many times the quota limits exceeded so that
the users can easily notice the case and tune the scheme.
SeongJae Park [Fri, 14 Jan 2022 22:10:17 +0000 (14:10 -0800)]
mm/damon/schemes: account scheme actions that successfully applied
Patch series "mm/damon/schemes: Extend stats for better online analysis and tuning".
To help online access pattern analysis and tuning of DAMON-based
Operation Schemes (DAMOS), DAMOS provides simple statistics for each
scheme. Introduction of DAMOS time/space quota further made the tuning
easier by making the risk management easier. However, that also made
understanding of the working schemes a little bit more difficult.
For an example, progress of a given scheme can now be throttled by not
only the aggressiveness of the target access pattern, but also the
time/space quotas. So, when a scheme is showing unexpectedly slow
progress, it's difficult to know by what the progress of the scheme is
throttled, with currently provided statistics.
This patchset extends the statistics to contain some metrics that can be
helpful for such online schemes analysis and tuning (patches 1-2),
exports those to users (patches 3 and 5), and add documents (patches 4
and 6).
This patch (of 6):
DAMON-based operation schemes (DAMOS) stats provide only the number and
the amount of regions that the action of the scheme has tried to be
applied. Because the action could be failed for some reasons, the
currently provided information is sometimes not useful or convenient
enough for schemes profiling and tuning. To improve this situation,
this commit extends the DAMOS stats to provide the number and the amount
of regions that the action has successfully applied.
SeongJae Park [Fri, 14 Jan 2022 22:10:14 +0000 (14:10 -0800)]
mm/damon: remove a mistakenly added comment for a future feature
Due to a mistake in patches reordering, a comment for a future feature
called 'arbitrary monitoring target support'[1], which is still under
development, has added. Because it only introduces confusion and we
don't have a plan to post the patches soon, this commit removes the
mistakenly added part.
SeongJae Park [Fri, 14 Jan 2022 22:10:08 +0000 (14:10 -0800)]
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
To get detailed monitoring results from the user space, users need to
use the damon_aggregated tracepoint. This commit adds a brief mention
of it at the beginning of the usage document.
Link: https://lkml.kernel.org/r/20211209131806.19317-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SeongJae Park [Fri, 14 Jan 2022 22:10:02 +0000 (14:10 -0800)]
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
DAMOS features including time/space quota limits and watermarks are not
described in the DAMON debugfs interface document. This commit updates
the document for the features.
Link: https://lkml.kernel.org/r/20211209131806.19317-3-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xin Hao [Fri, 14 Jan 2022 22:09:53 +0000 (14:09 -0800)]
mm/damon: move damon_rand() definition into damon.h
damon_rand() is called in three files:damon/core.c, damon/ paddr.c,
damon/vaddr.c, i think there is no need to redefine this twice, So move
it to damon.h will be a good choice.
Link: https://lkml.kernel.org/r/20211202075859.51341-1-xhao@linux.alibaba.com Signed-off-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xin Hao [Fri, 14 Jan 2022 22:09:50 +0000 (14:09 -0800)]
mm/damon/schemes: add the validity judgment of thresholds
In dbgfs "schemes" interface, i do some test like this:
# cd /sys/kernel/debug/damon
# echo "2 1 2 1 10 1 3 10 1 1 1 1 1 1 1 1 2 3" > schemes
# cat schemes
# 2 1 2 1 10 1 3 10 1 1 1 1 1 1 1 1 2 3 0 0
There have some unreasonable places, i set the valules of these variables
"<min_sz, max_sz> <min_nr_a, max_nr_a>, <min_age, max_age>, <wmarks.high,
wmarks.mid, wmarks.low>" as "<2, 1>, <2, 1>, <10, 1>, <1, 2, 3>.
So there add a validity judgment for these thresholds value.
Xin Hao [Fri, 14 Jan 2022 22:09:44 +0000 (14:09 -0800)]
mm/damon: remove some unneeded function definitions in damon.h
In damon.h some func definitions about VA & PA can only be used in its
own file, so there no need to define in the header file, and the header
file will look cleaner.
If other files later need these functions, the prototypes can be added
to damon.h at that time.
Xin Hao [Fri, 14 Jan 2022 22:09:37 +0000 (14:09 -0800)]
mm/damon: add 'age' of region tracepoint support
In Damon, we can get age information by analyzing the nr_access change,
But short time sampling is not effective, we have to obtain enough data
for analysis through long time trace, this also means that we need to
consume more cpu resources and storage space.
Now the region add a new 'age' variable, we only need to get the change of
age value through a little time trace, for example, age has been
increasing to 141, but nr_access shows a value of 0 at the same time,
Through this，we can conclude that the region has a very low nr_access
value for a long time.
Alistair Popple [Fri, 14 Jan 2022 22:09:31 +0000 (14:09 -0800)]
mm/hmm.c: allow VM_MIXEDMAP to work with hmm_range_fault
hmm_range_fault() can be used instead of get_user_pages() for devices
which allow faulting however unlike get_user_pages() it will return an
error when used on a VM_MIXEDMAP range.
To make hmm_range_fault() more closely match get_user_pages() remove
this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL
case in hmm_vma_handle_pte(). Rather than replicating the logic of
vm_normal_page() call it directly and do a check for the zero pfn
similar to what get_user_pages() currently does.
Also add a test to hmm selftest to verify functionality.
Link: https://lkml.kernel.org/r/20211104012001.2555676-1-apopple@nvidia.com Fixes: 0e6b820da2ce ("mm/hmm/mirror: helper to snapshot CPU page table") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ting Liu [Fri, 14 Jan 2022 22:09:28 +0000 (14:09 -0800)]
mm: make some vars and functions static or __init
"page_idle_ops" as a global var, but its scope of use within this
document. So it should be static.
"page_ext_ops" is a var used in the kernel initial phase. And other
functions are aslo used in the kernel initial phase. So they should be
__init or __initdata to reclaim memory.
After the TLB is flushed on CPU1 via flush_tlb_mm() and before
mm->tlb_flush_batched is set to false, some PTE is unmapped on CPU0 and
the TLB flushing is pended. Then the pended TLB flushing will be lost.
Although both set_tlb_ubc_flush_pending() and
flush_tlb_batched_pending() are called with PTL locked, different PTL
instances may be used.
Because the race window is really small, and the lost TLB flushing will
cause problem only if a TLB entry is inserted before the unmapping in
the race window, the race is only theoretical. But the fix is simple
and cheap too.
Syzbot has reported this too as follows:
==================================================================
BUG: KCSAN: data-race in flush_tlb_batched_pending / try_to_unmap_one
write to 0xffff8881072cfbbc of 1 bytes by task 71 on cpu 0:
set_tlb_ubc_flush_pending mm/rmap.c:636 [inline]
try_to_unmap_one+0x60e/0x1220 mm/rmap.c:1515
rmap_walk_anon+0x2fb/0x470 mm/rmap.c:2301
try_to_unmap+0xec/0x110
shrink_page_list+0xe91/0x2620 mm/vmscan.c:1719
shrink_inactive_list+0x3fb/0x730 mm/vmscan.c:2394
shrink_list mm/vmscan.c:2621 [inline]
shrink_lruvec+0x3c9/0x710 mm/vmscan.c:2940
shrink_node_memcgs+0x23e/0x410 mm/vmscan.c:3129
shrink_node+0x8f6/0x1190 mm/vmscan.c:3252
kswapd_shrink_node mm/vmscan.c:4022 [inline]
balance_pgdat+0x702/0xd30 mm/vmscan.c:4213
kswapd+0x200/0x340 mm/vmscan.c:4473
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
value changed: 0x01 -> 0x00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 71 Comm: kswapd0 Not tainted 5.16.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
==================================================================
[akpm@linux-foundation.org: tweak comments]
Link: https://lkml.kernel.org/r/20211201021104.126469-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: syzbot+aa5bebed695edaccf0df@syzkaller.appspotmail.com Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qi Zheng [Fri, 14 Jan 2022 22:09:12 +0000 (14:09 -0800)]
mm: memcg/percpu: account extra objcg space to memory cgroups
Similar to slab memory allocator, for each accounted percpu object there
is an extra space which is used to store obj_cgroup membership. Charge
it too.
[akpm@linux-foundation.org: fix layout]
Link: https://lkml.kernel.org/r/20211126040606.97836-1-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Fri, 14 Jan 2022 22:09:09 +0000 (14:09 -0800)]
mm/hwpoison: fix unpoison_memory()
After recent soft-offline rework, error pages can be taken off from
buddy allocator, but the existing unpoison_memory() does not properly
undo the operation. Moreover, due to the recent change on
__get_hwpoison_page(), get_page_unless_zero() is hardly called for
hwpoisoned pages. So __get_hwpoison_page() highly likely returns -EBUSY
(meaning to fail to grab page refcount) and unpoison just clears
PG_hwpoison without releasing a refcount. That does not lead to a
critical issue like kernel panic, but unpoisoned pages never get back to
buddy (leaked permanently), which is not good.
To (partially) fix this, we need to identify "taken off" pages from
other types of hwpoisoned pages. We can't use refcount or page flags
for this purpose, so a pseudo flag is defined by hacking ->private
field. Someone might think that put_page() is enough to cancel
taken-off pages, but the normal free path contains some operations not
suitable for the current purpose, and can fire VM_BUG_ON().
Note that unpoison_memory() is now supposed to be cancel hwpoison events
injected only by madvise() or
/sys/devices/system/memory/{hard,soft}_offline_page, not by MCE
injection, so please don't try to use unpoison when testing with MCE
injection.
[lkp@intel.com: report build failure for ARCH=i386]
Link: https://lkml.kernel.org/r/20211115084006.3728254-4-naoya.horiguchi@linux.dev Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Ding Hui <dinghui@sangfor.com.cn> Cc: Tony Luck <tony.luck@intel.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Fri, 14 Jan 2022 22:09:02 +0000 (14:09 -0800)]
mm/hwpoison: mf_mutex for soft offline and unpoison
Patch series "mm/hwpoison: fix unpoison_memory()", v4.
The main purpose of this series is to sync unpoison code to recent
changes around how hwpoison code takes page refcount. Unpoison should
work or simply fail (without crash) if impossible.
The recent works of keeping hwpoison pages in shmem pagecache introduce
a new state of hwpoisoned pages, but unpoison for such pages is not
supported yet with this series.
It seems that soft-offline and unpoison can be used as general purpose
page offline/online mechanism (not in the context of memory error). I
think that we need some additional works to realize it because currently
soft-offline and unpoison are assumed not to happen so frequently (print
out too many messages for aggressive usecases). But anyway this could
be another interesting next topic.
Originally mf_mutex is introduced to serialize multiple MCE events, but
it is not that useful to allow unpoison to run in parallel with
memory_failure() and soft offline. So apply mf_mutex to soft offline
and unpoison. The memory failure handler and soft offline handler get
simpler with this.
Link: https://lkml.kernel.org/r/20211115084006.3728254-1-naoya.horiguchi@linux.dev Link: https://lkml.kernel.org/r/20211115084006.3728254-2-naoya.horiguchi@linux.dev Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ding Hui <dinghui@sangfor.com.cn> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nanyong Sun [Fri, 14 Jan 2022 22:08:59 +0000 (14:08 -0800)]
mm: ksm: fix use-after-free kasan report in ksm_might_need_to_copy
When under the stress of swapping in/out with KSM enabled, there is a
low probability that kasan reports the BUG of use-after-free in
ksm_might_need_to_copy() when do swap in. The freed object is the
anon_vma got from page_anon_vma(page).
It is because a swapcache page associated with one anon_vma now needed
for another anon_vma, but the page's original vma was unmapped and the
anon_vma was freed. In this case the if condition below always return
false and then alloc a new page to copy. Swapin process then use the
new page and can continue to run well, so this is harmless actually.
This patch exchange the order of above two judgment statement to avoid
the kasan warning. Let cpu run "page->index == linear_page_index(vma,
address)" firstly and return false basically to skip the read of
anon_vma->root which may trigger the kasan use-after-free warning:
==================================================================
BUG: KASAN: use-after-free in ksm_might_need_to_copy+0x12e/0x5b0
Read of size 8 at addr ffff88be9977dbd0 by task khugepaged/694
The buggy address belongs to the object at ffff88be9977dba0
which belongs to the cache anon_vma_chain of size 64
The buggy address is located 48 bytes inside of
64-byte region [ffff88be9977dba0, ffff88be9977dbe0)
The buggy address belongs to the page:
page:ffffea00fa65df40 count:1 mapcount:0 mapping:ffff888107717800 index:0x0
flags: 0x17ffffc0000100(slab)
==================================================================
Link: https://lkml.kernel.org/r/20211202102940.1069634-1-sunnanyong@huawei.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/thp: drop unused trace events hugepage_[invalidate|splitting]
The trace events hugepage_[invalidate|splitting], were added via the
commit 21ec9f04ce06 ("powerpc/thp: Add tracepoints to track hugepage
invalidate"). Afterwards their call sites i.e
trace_hugepage_[invalidate|splitting] were just dropped off, leaving
these trace points unused.
Link: https://lkml.kernel.org/r/1641546351-15109-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Fri, 14 Jan 2022 22:08:53 +0000 (14:08 -0800)]
mm/migrate: remove redundant variables used in a for-loop
The variable addr is being set and incremented in a for-loop but not
actually being used. It is redundant and so addr and also variable
start can be removed.
Huang Ying [Fri, 14 Jan 2022 22:08:49 +0000 (14:08 -0800)]
mm/migrate: move node demotion code to near its user
Now, node_demotion and next_demotion_node() are placed between
__unmap_and_move() and unmap_and_move(). This hurts code readability.
So move them near their users in the file. There's no functionality
change in this patch.
Link: https://lkml.kernel.org/r/20211206031227.3323097-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Wei Xu <weixugc@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/c31d36bd097c6e9e69fc0f409c43b78e53e64fc2.1637766801.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Xunlei Pang <xlpang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baolin Wang [Fri, 14 Jan 2022 22:08:43 +0000 (14:08 -0800)]
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Xunlei Pang <xlpang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baolin Wang [Fri, 14 Jan 2022 22:08:40 +0000 (14:08 -0800)]
mm: compaction: fix the migration stats in trace_mm_compaction_migratepages()
Now the migrate_pages() has changed to return the number of {normal
page, THP, hugetlb} instead, thus we should not use the return value to
calculate the number of pages migrated successfully. Instead we can
just use the 'nr_succeeded' which indicates the number of normal pages
migrated successfully to calculate the non-migrated pages in
trace_mm_compaction_migratepages().
Baolin Wang [Fri, 14 Jan 2022 22:08:37 +0000 (14:08 -0800)]
mm: migrate: correct the hugetlb migration stats
Correct the migration stats for hugetlb with using compound_nr() instead
of thp_nr_pages(), meanwhile change 'nr_failed_pages' to record the
number of normal pages failed to migrate, including THP and hugetlb, and
'nr_succeeded' will record the number of normal pages migrated
successfully.
Baolin Wang [Fri, 14 Jan 2022 22:08:34 +0000 (14:08 -0800)]
mm: migrate: fix the return value of migrate_pages()
Patch series "Improve the migration stats".
According to talk with Zi Yan [1], this patch set changes the return
value of migrate_pages() to avoid returning a number which is larger
than the number of pages the users tried to migrate by move_pages()
syscall. Also fix the hugetlb migration stats and migration stats in
trace_mm_compaction_migratepages().
As Zi Yan pointed out, the syscall move_pages() can return a
non-migrated number larger than the number of pages the users tried to
migrate, when a THP page is failed to migrate. This is confusing for
users.
Since other migration scenarios do not care about the actual
non-migrated number of pages except the memory compaction migration
which will fix in following patch. Thus we can change the return value
to return the number of {normal page, THP, hugetlb} instead to avoid
this issue, and the number of THP splits will be considered as the
number of non-migrated THP, no matter how many subpages of the THP are
migrated successfully. Meanwhile we should still keep the migration
counters using the number of normal pages.
hugetlbfs: fix off-by-one error in hugetlb_vmdelete_list()
Pass "end - 1" instead of "end" when walking the interval tree in
hugetlb_vmdelete_list() to fix an inclusive vs. exclusive bug. The two
callers that pass a non-zero "end" treat it as exclusive, whereas the
interval tree iterator expects an inclusive "last". E.g. punching a
hole in a file that precisely matches the size of a single hugepage,
with a vma starting right on the boundary, will result in
unmap_hugepage_range() being called twice, with the second call having
start==end.
The off-by-one error doesn't cause functional problems as
__unmap_hugepage_range() turns into a massive nop due to
short-circuiting its for-loop on "address < end". But, the mmu_notifier
invocations to invalid_range_{start,end}() are passed a bogus zero-sized
range, which may be unexpected behavior for secondary MMUs.
The bug was exposed by commit ed922739c919 ("KVM: Use interval tree to
do fast hva lookup in memslots"), currently queued in the KVM tree for
5.17, which added a WARN to detect ranges with start==end.
Link: https://lkml.kernel.org/r/20211228234257.1926057-1-seanjc@google.com Fixes: 2f7c29fe235a ("hugetlbfs: hugetlb_vmtruncate_list() needs to take a range to delete") Signed-off-by: Sean Christopherson <seanjc@google.com> Reported-by: syzbot+4e697fe80a31aa7efe21@syzkaller.appspotmail.com Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jann Horn [Fri, 14 Jan 2022 22:08:27 +0000 (14:08 -0800)]
mm, oom: OOM sysrq should always kill a process
The OOM kill sysrq (alt+sysrq+F) should allow the user to kill the
process with the highest OOM badness with a single execution.
However, at the moment, the OOM kill can bail out if an OOM notifier
(e.g. the i915 one) says that it reclaimed a tiny amount of memory from
somewhere. That's probably not what the user wants, so skip the bailout
if the OOM was triggered via sysrq.
Link: https://lkml.kernel.org/r/20220106102605.635656-1-jannh@google.com Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / kernel.git / log