PM: runtime: document common mistake with pm_runtime_get_sync()
pm_runtime_get_sync(), contradictory to intuition, does not drop the
runtime PM usage counter on errors which lead to several wrong usages in
drivers (missing the put). pm_runtime_resume_and_get() was added as a
better implementation so document the preference of using it, hoping it
will stop bad patterns.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
[ rjw: Documentation change edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Sun, 30 May 2021 04:24:00 +0000 (18:24 -1000)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"This is a bit larger than usual at rc4 time. The reason is due to
Lee's work of fixing newly reported build warnings.
The rest is fixes as usual"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits)
MAINTAINERS: adjust to removing i2c designware platform data
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
i2c: busses: i2c-st: Fix copy/paste function misnaming issues
i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
i2c: I2C_HISI should depend on ACPI
...
Linus Torvalds [Sun, 30 May 2021 04:16:09 +0000 (18:16 -1000)]
Merge tag 'seccomp-fixes-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This fixes a hard-to-hit race condition in the addfd user_notif
feature of seccomp, visible since v5.9.
And a small documentation fix"
* tag 'seccomp-fixes-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Refactor notification handler to prepare for new semantics
Documentation: seccomp: Fix user notification documentation
Linus Torvalds [Sun, 30 May 2021 03:47:19 +0000 (17:47 -1000)]
Merge tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This week's pile mitigates some decades-old problems in how extent
size hints interact with realtime volumes, fixes some failures in
online shrink, and fixes a problem where directory and symlink
shrinking on extremely fragmented filesystems could fail.
The most user-notable change here is to point users at our (new) IRC
channel on OFTC. Freedom isn't free, it costs folks like you and me;
and if you don't kowtow, they'll expel everyone and take over your
channel. (Ok, ok, that didn't fit the song lyrics...)
Summary:
- Fix a bug where unmapping operations end earlier than expected,
which can cause chaos on multi-block directory and symlink shrink
operations.
- Fix an erroneous assert that can trigger if we try to transition a
bmap structure from btree format to extents format with zero
extents. This was exposed by xfs/538"
* tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: bunmapi has unnecessary AG lock ordering issues
xfs: btree format inode forks can have zero extents
xfs: add new IRC channel to MAINTAINERS
xfs: validate extsz hints against rt extent size when rtinherit is set
xfs: standardize extent size hint validation
xfs: check free AG space when making per-AG reservations
Sargun Dhillon [Mon, 17 May 2021 19:39:06 +0000 (12:39 -0700)]
seccomp: Refactor notification handler to prepare for new semantics
This refactors the user notification code to have a do / while loop around
the completion condition. This has a small change in semantic, in that
previously we ignored addfd calls upon wakeup if the notification had been
responded to, but instead with the new change we check for an outstanding
addfd calls prior to returning to userspace.
Rodrigo Campos also identified a bug that can result in addfd causing
an early return, when the supervisor didn't actually handle the
syscall [1].
Linus Torvalds [Sat, 29 May 2021 16:55:55 +0000 (06:55 -1000)]
Merge tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix uninitialized error code value for the SPMI adc driver (Yang
Yingliang)
- Fix kernel doc warning (Yang Li)
- Fix wrong read-write thermal trip point initialization (Srinivas
Pandruvada)
* tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()
thermal/ti-soc-thermal: Fix kernel-doc
thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID
Linus Torvalds [Sat, 29 May 2021 16:33:28 +0000 (06:33 -1000)]
Merge tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver core / debugfs fixes for 5.13-rc4:
- debugfs fix for incorrect "lockdown" mode for selinux accesses
- two device link changes, one bugfix and one cleanup
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: base: Reduce device link removal code duplication
drivers: base: Fix device link removal
debugfs: fix security_locked_down() call for SELinux
Linus Torvalds [Sat, 29 May 2021 16:29:13 +0000 (06:29 -1000)]
Merge tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO and staging driver fixes for reported issues
for 5.13-rc4.
Nothing major here, tiny changes for reported problems, full details
are in the shortlog if people are curious.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: ad7793: Add missing error code in ad7793_setup()
iio: adc: ad7923: Fix undersized rx buffer.
iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()
iio: dac: ad5770r: Put fwnode in error case during ->probe()
iio: gyro: fxas21002c: balance runtime power in error path
staging: emxx_udc: fix loop in _nbu2ss_nuke()
staging: iio: cdc: ad7746: avoid overwrite of num_channels
iio: adc: ad7192: handle regulator voltage error first
iio: adc: ad7192: Avoid disabling a clock that was never enabled.
iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
Linus Torvalds [Sat, 29 May 2021 16:25:16 +0000 (06:25 -1000)]
Merge tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small fixes for reported problems for tty and serial
drivers for 5.13-rc4.
They consist of:
- 8250 bugfixes and new device support
- lockdown security mode fixup
- syzbot found problems fixed
- 8250_omap fix for interrupt storm
- revert of 8250_omap driver fix as it caused worse problem than the
original issue
All but the last patch have been in linux-next for a while, the last
one is a revert of a problem found in linux-next with the 8250_omap
driver change"
* tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
serial: 8250_pci: handle FL_NOIRQ board flag
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
serial: 8250_pci: Add support for new HPE serial device
serial: 8250: 8250_omap: Fix possible interrupt storm
serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
serial: 8250_dw: Add device HID for new AMD UART controller
serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
serial: core: fix suspicious security_locked_down() call
serial: tegra: Fix a mask operation that is always true
Linus Torvalds [Sat, 29 May 2021 16:11:21 +0000 (06:11 -1000)]
Merge tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of tiny USB and Thunderbolt driver fixes for
5.13-rc4.
They consist of:
- thunderbolt fixes for some NVM bound issues
- xhci fixes for reported problems
- control-request fixups
- documentation build warning fixes
- new usb-serial driver device ids
- typec bugfixes for reported issues
- usbfs warning fixups (could be triggered from userspace)
- other tiny fixes for reported problems.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall
xhci: fix giving back URB with incorrect status regression in 5.12
usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
usb: typec: tcpm: Respond Not_Supported if no snk_vdo
usb: typec: tcpm: Properly interrupt VDM AMS
USB: trancevibrator: fix control-request direction
usb: Restore the usb_header label
usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header
usb: typec: ucsi: Clear pending after acking connector change
usb: typec: mux: Fix matching with typec_altmode_desc
misc/uss720: fix memory leak in uss720_probe
usb: dwc3: gadget: Properly track pending and queued SG
USB: usbfs: Don't WARN about excessively large memory allocations
thunderbolt: usb4: Fix NVM read buffer bounds and offset issue
thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
usb: chipidea: udc: assign interrupt number to USB gadget structure
usb: cdnsp: Fix lack of removing request from pending list.
usb: cdns3: Fix runtime PM imbalance on error
USB: serial: pl2303: add device id for ADLINK ND-6530 GC
USB: serial: ti_usb_3410_5052: add startech.com device id
...
Linus Torvalds [Sat, 29 May 2021 16:02:25 +0000 (06:02 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
Linus Torvalds [Sat, 29 May 2021 15:51:53 +0000 (05:51 -1000)]
Merge tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
"Fix races in vfio-ccw request handling"
* tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Serialize FSM IDLE state with I/O completion
vfio-ccw: Reset FSM state to IDLE inside FSM
vfio-ccw: Check initialized flag in cp_init()
Paolo Bonzini [Fri, 28 May 2021 19:10:58 +0000 (15:10 -0400)]
selftests: kvm: fix overlapping addresses in memslot_perf_test
vm_create allocates memory and maps it close to GPA. This memory
is separate from what is allocated in subsequent calls to
vm_userspace_mem_region_add, so it is incorrect to pass the
test memory size to vm_create_default. Just pass a small
fixed amount of memory which can be used later for page table,
otherwise GPAs are already allocated at MEM_GPA and the
test aborts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 29 May 2021 00:47:48 +0000 (14:47 -1000)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq
scsi: vmw_pvscsi: Set correct residual data length
scsi: bnx2fc: Return failure if io_req is already in ABTS processing
scsi: aic7xxx: Remove multiple definition of globals
scsi: aic7xxx: Restore several defines for aic7xxx firmware build
scsi: target: iblock: Fix smp_processor_id() BUG messages
scsi: libsas: Use _safe() loop in sas_resume_port()
scsi: target: tcmu: Fix xarray RCU warning
scsi: target: core: Avoid smp_processor_id() in preemptible code
Linus Torvalds [Sat, 29 May 2021 00:42:37 +0000 (14:42 -1000)]
Merge tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou
Pu)
- fix false keep-alive timeout when a controller is torn down
(Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)
* tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
nvmet: fix false keep-alive timeout when a controller is torn down
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
md/raid5: remove an incorrect assert in in_chunk_boundary
s390/dasd: add missing discipline function
nvme-fabrics: decode host pathing error for connect
nvme-fc: short-circuit reconnect retries
nvme: fix potential memory leaks in nvme_cdev_add
Linus Torvalds [Sat, 29 May 2021 00:35:55 +0000 (14:35 -1000)]
Merge tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few minor fixes:
- Fix an issue with hashed wait removal on exit (Zqiang, Pavel)
- Fix a recent data race introduced in this series (Marco)"
* tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
io_uring: fix data race to avoid potential NULL-deref
io-wq: Fix UAF when wakeup wqe in hash waitqueue
io_uring/io-wq: close io-wq full-stop gap
* tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm:
drm/ttm: Skip swapout if ttm object is not populated
drm/i915: Reenable LTTPR non-transparent LT mode for DPCD_REV<1.4
drm/meson: fix shutdown crash when component not probed
drm/amdgpu/jpeg3: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/jpeg2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn3: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate
drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate
drm/amdkfd: correct sienna_cichlid SDMA RLC register offset error
drm/amd/pm: correct MGpuFanBoost setting
Linus Torvalds [Sat, 29 May 2021 00:15:47 +0000 (14:15 -1000)]
Merge tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three SMB3 fixes.
Two for stable, and the other fixes a problem pointed out with a
recently added ioctl"
* tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
cifs: fix string declarations and assignments in tracepoints
cifs: set server->cipher_type to AES-128-CCM for SMB3.0
Linus Torvalds [Fri, 28 May 2021 18:53:19 +0000 (08:53 -1000)]
Merge tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Stable fixes:
- Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
- Fix Oops in xs_tcp_send_request() when transport is disconnected
- Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
Bugfixes:
- Fix instances where signal_pending() should be fatal_signal_pending()
- fix an incorrect limit in filelayout_decode_layout()
- Fixes for the SUNRPC backlogged RPC queue
- Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
- Revert commit cde47f9f9ed9 ("Clean up rpcrdma_prepare_readch()")"
* tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Remove trailing semicolon in macros
xprtrdma: Revert cde47f9f9ed9
NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
NFS: Clean up reset of the mirror accounting variables
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
SUNRPC: More fixes for backlog congestion
SUNRPC: Fix Oops in xs_tcp_send_request() when transport is disconnected
NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
SUNRPC in case of backlog, hand free slots directly to waiting task
pNFS/NFSv4: Remove redundant initialization of 'rd_size'
NFS: fix an incorrect limit in filelayout_decode_layout()
fs/nfs: Use fatal_signal_pending instead of signal_pending
Linus Torvalds [Fri, 28 May 2021 18:47:50 +0000 (08:47 -1000)]
Merge tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly high volume at this time due to pending ASoC fixes.
While there are a few generic simple-card fixes for regressions, most
of the changes are device-specific fixes: ASoC Intel SOF, codec
clocks, other codec / platform fixes as well as usual HD-audio and
USB-audio"
* tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340
ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static
ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i
ALSA: hda/realtek: Headphone volume is controlled by Front mixer
ALSA: usb-audio: scarlett2: Improve driver startup messages
ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
ALSA: usb-audio: fix control-request direction
ASoC: qcom: lpass-cpu: Use optional clk APIs
ASoC: cs35l33: fix an error code in probe()
ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware
ASoC: fsl: fix SND_SOC_IMX_RPMSG dependency
ASoC: cs42l52: Minor tidy up of error paths
ASoC: cs35l32: Add missing regmap use_single config
ASoC: cs35l34: Add missing regmap use_single config
ASoC: cs42l73: Add missing regmap use_single config
ASoC: cs53l30: Add missing regmap use_single config
...
- Avoid CFI mismatches by checking initcall_t types (Marco Elver)
* tag 'clang-features-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Makefile: LTO: have linker check -Wframe-larger-than
init: verify that function is initcall_t at compile-time
Linus Torvalds [Fri, 28 May 2021 18:24:13 +0000 (08:24 -1000)]
Merge tag 'mips-fixes_5.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix function/preempt trace hangs
- a few build fixes
* tag 'mips-fixes_5.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER
MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c
MIPS: launch.h: add include guard to prevent build errors
MIPS: alchemy: xxs1500: add gpio-au1000.h header file
Wanpeng Li [Fri, 28 May 2021 00:01:37 +0000 (17:01 -0700)]
KVM: X86: Kill off ctxt->ud
ctxt->ud is consumed only by x86_decode_insn(), we can kill it off by
passing emulation_type to x86_decode_insn() and dropping ctxt->ud
altogether. Tracking that info in ctxt for literally one call is silly.
Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <1622160097-37633-2-git-send-email-wanpengli@tencent.com>
Commit 41f146e5aad2 ("KVM: x86: handle hardware breakpoints during emulation())
adds hardware breakpoints check before emulation the instruction and parts of
emulation context initialization, actually we don't have the EMULTYPE_NO_DECODE flag
here and the emulation context will not be reused. Commit fe3d1ca66ae6 ("KVM: x86:
set ctxt->have_exception in x86_decode_insn()) triggers the warning because it
catches the stale emulation context has #UD, however, it is not during instruction
decoding which should result in EMULATION_FAILED. This patch fixes it by moving
the second part emulation context initialization into init_emulate_ctxt() and
before hardware breakpoints check. The ctxt->ud will be dropped by a follow-up
patch.
Yuan Yao [Wed, 26 May 2021 06:38:28 +0000 (14:38 +0800)]
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
The kvm_get_linear_rip() handles x86/long mode cases well and has
better readability, __kvm_set_rflags() also use the paired
function kvm_is_linear_rip() to check the vcpu->arch.singlestep_rip
set in kvm_arch_vcpu_ioctl_set_guest_debug(), so change the
"CS.BASE + RIP" code in kvm_arch_vcpu_ioctl_set_guest_debug() and
handle_exception_nmi() to this one.
Signed-off-by: Yuan Yao <yuan.yao@intel.com>
Message-Id: <20210526063828.1173-1-yuan.yao@linux.intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sargun Dhillon [Mon, 17 May 2021 19:39:05 +0000 (12:39 -0700)]
Documentation: seccomp: Fix user notification documentation
The documentation had some previously incorrect information about how
userspace notifications (and responses) were handled due to a change
from a previously proposed patchset.
Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Fixes: 388c4c8f99d2 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210517193908.3113-2-sargun@sargun.me
MAINTAINERS: adjust to removing i2c designware platform data
Commit c52480e11213 ("i2c: designware: Get rid of legacy platform data")
removes ./include/linux/platform_data/i2c-designware.h, but misses to
adjust the SYNOPSYS DESIGNWARE I2C DRIVER section in MAINTAINERS.
Tony writes:
I just noticed this causes the following regression in Linux
next when pressing a key on uart console after boot at least on
omap3. This seems to happen on serial_port_in(port, UART_RX) in
the quirk handling.
So let's drop this.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/YLCCJzkkB4N7LTQS@atomide.com Fixes: 5bd24e94b7a0 ("serial: 8250: 8250_omap: Fix possible interrupt storm") Reported-by: Tony Lindgren <tony@atomide.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: s3c2410: fix possible NULL pointer deref on read message after write
Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained. However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller. At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction". This stop results in clearing the
message queue (i2c->msg = NULL).
The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.
The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
if (!is_msgend(i2c)) {
4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
s3c24xx_i2c_stop(i2c, -EINVAL);
5. Jumping to label retry_write.
goto retry_write;
6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
if (!is_msgend(i2c)) {"
All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning). This seems a reasonable choice also here
since message buffer was entirely emptied.
Addresses-Coverity: Explicit null dereferenced Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Qii Wang [Thu, 27 May 2021 12:04:04 +0000 (20:04 +0800)]
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
The i2c controller driver do dma reset after transfer timeout,
but sometimes dma reset will trigger an unexpected DMA_ERR irq.
It will cause the i2c controller to continuously send interrupts
to the system and cause soft lock-up. So we need to disable i2c
start_en and clear intr_stat to stop i2c controller before dma
reset when transfer timeout.
Fixes: c1d0e26bec6e("i2c: mediatek: move dma reset before i2c reset") Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Namhyung Kim [Thu, 27 May 2021 22:00:52 +0000 (15:00 -0700)]
perf stat: Fix error check for bpf_program__attach
It seems the bpf_program__attach() returns a negative error code instead
of a NULL pointer in case of error.
Fixes: 74550c0e4667 ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20210527220052.1657578-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Thu, 27 May 2021 22:01:26 +0000 (12:01 -1000)]
Merge branch 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fixes from Dennis Zhou:
"This contains a cleanup to lib/percpu-refcount.c and an update to the
MAINTAINERS file to more formally take over support for lib/percpu*"
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
MAINTAINERS: Add lib/percpu* as part of percpu entry
percpu_ref: Don't opencode percpu_ref_is_dying
Linus Torvalds [Thu, 27 May 2021 21:58:26 +0000 (11:58 -1000)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Don't use contiguous or block mappings for the linear map when KFENCE
is enabled.
- Fix link in the arch_counter_enforce_ordering() comment.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: don't use CON and BLK mapping if KFENCE is enabled
arm64: Fix stale link in the arch_counter_enforce_ordering() comment
- Revert DM snapshot fix from v5.13-rc3 and then properly fix crash
when an origin has no snapshots. This allows only the proper fix to
go to stable@ (since the original fix was successfully dropped).
* tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm snapshot: properly fix a crash when an origin has no snapshots
dm snapshot: revert "fix a crash when an origin has no snapshots"
dm verity: fix require_signatures module_param permissions
Aurelien Aptel [Fri, 21 May 2021 15:19:28 +0000 (17:19 +0200)]
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
Make CIFS_FULL_KEY_DUMP ioctl able to return variable-length keys.
* userspace needs to pass the struct size along with optional
session_id and some space at the end to store keys
* if there is enough space kernel returns keys in the extra space and
sets the length of each key via xyz_key_length fields
This also fixes the build error for get_user() on ARM.
Signed-off-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Jean Delvare [Tue, 25 May 2021 15:03:36 +0000 (17:03 +0200)]
i2c: i801: Don't generate an interrupt on bus reset
Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.
So disable interrupts while trying to reset the bus. Interrupts will
be enabled again for the following transaction.
Fixes: ad84f432a9b8 ("i2c-i801: Enable IRQ for SMBus transactions") Reported-by: syzbot+b4d3fd1dfd53e90afd79@syzkaller.appspotmail.com Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Tue, 11 May 2021 21:20:52 +0000 (09:20 +1200)]
i2c: mpc: implement erratum A-004447 workaround
The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Tue, 11 May 2021 21:20:51 +0000 (09:20 +1200)]
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Chris Packham [Tue, 11 May 2021 21:20:50 +0000 (09:20 +1200)]
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Lee Jones [Thu, 20 May 2021 19:01:02 +0000 (20:01 +0100)]
i2c: busses: i2c-st: Fix copy/paste function misnaming issues
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-st.c:531: warning: expecting prototype for st_i2c_handle_write(). Prototype was for st_i2c_handle_read() instead
drivers/i2c/busses/i2c-st.c:566: warning: expecting prototype for st_i2c_isr(). Prototype was for st_i2c_isr_thread() instead
Fix the "enmpty" typo while here.
Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Lee Jones [Thu, 20 May 2021 19:01:00 +0000 (20:01 +0100)]
i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-pnx.c:147: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:147: warning: Excess function parameter 'adap' description in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:202: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:202: warning: Excess function parameter 'adap' description in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:231: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:231: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:301: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_rcv'
drivers/i2c/busses/i2c-pnx.c:301: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_rcv'
Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Lee Jones [Thu, 20 May 2021 19:00:59 +0000 (20:00 +0100)]
i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-ocores.c:253: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:267: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:299: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:347: warning: expecting prototype for It handles an IRQ(). Prototype was for ocores_process_polling() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Lee Jones [Thu, 20 May 2021 19:00:57 +0000 (20:00 +0100)]
i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-eg20t.c:151: warning: bad line: PCH i2c controller
drivers/i2c/busses/i2c-eg20t.c:369: warning: Function parameter or member 'msgs' not described in 'pch_i2c_writebytes'
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_deselect'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_deselect'
Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Linus Torvalds [Thu, 27 May 2021 18:39:05 +0000 (08:39 -1000)]
Merge tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent ACPI power management regression causing boot issues to
occur on some systems due to attempts to turn off ACPI power resources
that are already off (which should work according to the ACPI
specification)"
* tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: power: Refine turning off unused power resources
Linus Torvalds [Thu, 27 May 2021 18:06:36 +0000 (08:06 -1000)]
Merge tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Important fix for the AMD IOMMU driver in the recently added
page-specific invalidation code to fix a calculation.
- Fix a NULL-ptr dereference in the AMD IOMMU driver when a device
switches domain types.
- Fixes for the Intel VT-d driver to check for allocation failure and
do correct cleanup.
- Another fix for Intel VT-d to not allow supervisor page requests from
devices when using second level page translation.
- Add a MODULE_DEVICE_TABLE to the VIRTIO IOMMU driver
* tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix sysfs leak in alloc_iommu()
iommu/vt-d: Use user privilege for RID2PASID translation
iommu/vt-d: Check for allocation failure in aux_detach_device()
iommu/virtio: Add missing MODULE_DEVICE_TABLE
iommu/amd: Fix wrong parentheses on page-specific invalidations
iommu/amd: Clear DMA ops when switching domain
We are aborting the bunmapi() pass because of this specific chunk of
code:
/*
* Make sure we don't touch multiple AGF headers out of order
* in a single transaction, as that could cause AB-BA deadlocks.
*/
if (!wasdel && !isrt) {
agno = XFS_FSB_TO_AGNO(mp, del.br_startblock);
if (prev_agno != NULLAGNUMBER && prev_agno > agno)
break;
prev_agno = agno;
}
This is designed to prevent deadlocks in AGF locking when freeing
multiple extents by ensuring that we only ever lock in increasing
AG number order. Unfortunately, this also violates the "bunmapi will
always succeed" semantic that some high level callers depend on,
such as xfs_dir2_shrink_inode(), xfs_da_shrink_inode() and
xfs_inactive_symlink_rmt().
This AG lock ordering was introduced back in 2017 to fix deadlocks
triggered by generic/299 as reported here:
This codebase is old enough that it was before we were defering all
AG based extent freeing from within xfs_bunmapi(). THat is, we never
actually lock AGs in xfs_bunmapi() any more - every non-rt based
extent free is added to the defer ops list, as is all BMBT block
freeing. And RT extents are not RT based, so there's no lock
ordering issues associated with them.
Hence this AGF lock ordering code is both broken and dead. Let's
just remove it so that the large directory block code works reliably
again.
Tested against xfs/538 and generic/299 which is the original test
that exposed the deadlocks that this code fixed.
Fixes: 77fe4e475cb0 ("xfs: fix multi-AG deadlock in xfs_bunmapi") Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
This is a check to ensure that the extents have been read into
memory before we are doing a ifork btree manipulation. This assert
is bogus in the above case.
We have a fragmented directory block that has more extents in it
than can fit in extent format, so the inode data fork is in btree
format. xfs_dir2_shrink_inode() asks to remove all remaining 16
filesystem blocks from the inode so it can convert to short form,
and __xfs_bunmapi() removes all the extents. We now have a data fork
in btree format but have zero extents in the fork. This incorrectly
trips the xfs_need_iread_extents() assert because it assumes that an
empty extent btree means the extent tree has not been read into
memory yet. This is clearly not the case with xfs_bunmapi(), as it
has an explicit call to xfs_iread_extents() in it to pull the
extents into memory before it starts unmapping.
Also, the assert directly after this bogus one is:
ASSERT(ifp->if_format == XFS_DINODE_FMT_BTREE);
Which covers the context in which it is legal to call
xfs_bmap_btree_to_extents just fine. Hence we should just remove the
bogus assert as it is clearly wrong and causes a regression.
The returns the test behaviour to the pre-existing assert failure in
xfs_dir2_shrink_inode() that indicates xfs_bunmapi() has failed to
remove all the extents in the range it was asked to unmap.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Marco Elver [Thu, 27 May 2021 09:25:48 +0000 (11:25 +0200)]
io_uring: fix data race to avoid potential NULL-deref
Commit 4eb8beced46e ("io_uring: fortify tctx/io_wq cleanup") introduced
setting tctx->io_wq to NULL a bit earlier. This has caused KCSAN to
detect a data race between accesses to tctx->io_wq:
write to 0xffff88811d8df330 of 8 bytes by task 3709 on cpu 1:
io_uring_clean_tctx fs/io_uring.c:9042 [inline]
__io_uring_cancel fs/io_uring.c:9136
io_uring_files_cancel include/linux/io_uring.h:16 [inline]
do_exit kernel/exit.c:781
do_group_exit kernel/exit.c:923
get_signal kernel/signal.c:2835
arch_do_signal_or_restart arch/x86/kernel/signal.c:789
handle_signal_work kernel/entry/common.c:147 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
...
read to 0xffff88811d8df330 of 8 bytes by task 6412 on cpu 0:
io_uring_try_cancel_iowq fs/io_uring.c:8911 [inline]
io_uring_try_cancel_requests fs/io_uring.c:8933
io_ring_exit_work fs/io_uring.c:8736
process_one_work kernel/workqueue.c:2276
...
With the config used, KCSAN only reports data races with value changes:
this implies that in the case here we also know that tctx->io_wq was
non-NULL. Therefore, depending on interleaving, we may end up with:
Note: It is likely that thus far we've gotten lucky and the compiler
optimizes the double-read into a single read into a register -- but this
is never guaranteed, and can easily change with a different config!
Fix the data race by restoring the previous behaviour, where both
setting io_wq to NULL and put of the wq are _serialized_ after
concurrent io_uring_try_cancel_iowq() via acquisition of the uring_lock
and removal of the node in io_uring_del_task_file().
Jens Axboe [Thu, 27 May 2021 13:38:12 +0000 (07:38 -0600)]
Merge tag 'nvme-5.13-2021-05-27' of git://git.infradead.org/nvme into block-5.13
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.13
- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou Pu)
- fix false keep-alive timeout when a controller is torn down
(Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)"
* tag 'nvme-5.13-2021-05-27' of git://git.infradead.org/nvme:
nvmet: fix false keep-alive timeout when a controller is torn down
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
nvme-fabrics: decode host pathing error for connect
nvme-fc: short-circuit reconnect retries
nvme: fix potential memory leaks in nvme_cdev_add
In commit b02247bbfa51 ("serial: 8250_pci: Implement MSI(-X) support")
the way the irq gets allocated was changed. With that change the
handling FL_NOIRQ got lost. Restore the old behaviour.
mei: request autosuspend after sending rx flow control
A rx flow control waiting in the control queue may block autosuspend.
Re-request autosuspend after flow control been sent to unblock
the transition to the low power state.
David Matlack [Wed, 26 May 2021 16:32:27 +0000 (16:32 +0000)]
KVM: x86/mmu: Fix comment mentioning skip_4k
This comment was left over from a previous version of the patch that
introduced wrprot_gfn_range, when skip_4k was passed in instead of
min_level.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210526163227.3113557-1-dmatlack@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit f4f738094173 ("SUNRPC: Clean up the handling of page padding
in rpc_prepare_reply_pages()") [Dec 2020] affects RPC Replies that
have a data payload (i.e., Write chunks).
rpcrdma_prepare_readch(), as its name suggests, sets up Read chunks
which are data payloads within RPC Calls. Those payloads are
constructed by xdr_write_pages(), which continues to stuff the call
buffer's tail kvec with the payload's XDR roundup. Thus removing
the tail buffer logic in rpcrdma_prepare_readch() was the wrong
thing to do.
Fixes: cde47f9f9ed9 ("xprtrdma: Clean up rpcrdma_prepare_readch()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Zhang Xiaoxu [Wed, 26 May 2021 03:32:35 +0000 (23:32 -0400)]
NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
Since commit b4cc7a6a2ce6 ("NFSv4.2: handle NFS-specific llseek errors"),
nfs42_proc_llseek would return -EOPNOTSUPP rather than -ENOTSUPP when
SEEK_DATA on NFSv4.0/v4.1.
This will lead xfstests generic/285 not run on NFSv4.0/v4.1 when set the
CONFIG_NFS_V4_2, rather than run failed.
Marcelo Tosatti [Wed, 26 May 2021 17:20:14 +0000 (14:20 -0300)]
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
For VMX, when a vcpu enters HLT emulation, pi_post_block will:
1) Add vcpu to per-cpu list of blocked vcpus.
2) Program the posted-interrupt descriptor "notification vector"
to POSTED_INTR_WAKEUP_VECTOR
With interrupt remapping, an interrupt will set the PIR bit for the
vector programmed for the device on the CPU, test-and-set the
ON bit on the posted interrupt descriptor, and if the ON bit is clear
generate an interrupt for the notification vector.
This way, the target CPU wakes upon a device interrupt and wakes up
the target vcpu.
Problem is that pi_post_block only programs the notification vector
if kvm_arch_has_assigned_device() is true. Its possible for the
following to happen:
1) vcpu V HLTs on pcpu P, kvm_arch_has_assigned_device is false,
notification vector is not programmed
2) device is assigned to VM
3) device interrupts vcpu V, sets ON bit
(notification vector not programmed, so pcpu P remains in idle)
4) vcpu 0 IPIs vcpu V (in guest), but since pi descriptor ON bit is set,
kvm_vcpu_kick is skipped
5) vcpu 0 busy spins on vcpu V's response for several seconds, until
RCU watchdog NMIs all vCPUs.
To fix this, use the start_assignment kvm_x86_ops callback to kick
vcpus out of the halt loop, so the notification vector is
properly reprogrammed to the wakeup vector.
Wanpeng Li [Tue, 18 May 2021 12:00:35 +0000 (05:00 -0700)]
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
Let's treat lapic_timer_advance_ns automatic tuning logic as hypervisor
overhead, move it before wait_lapic_expire instead of between wait_lapic_expire
and the world switch, the wait duration should be calculated by the
up-to-date guest_tsc after the overhead of automatic tuning logic. This
patch reduces ~30+ cycles for kvm-unit-tests/tscdeadline-latency when testing
busy waits.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1621339235-11131-5-git-send-email-wanpengli@tencent.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Axel Rasmussen [Wed, 19 May 2021 20:03:39 +0000 (13:03 -0700)]
KVM: selftests: add shared hugetlbfs backing source type
This lets us run the demand paging test on top of a shared
hugetlbfs-backed area. The "shared" is key, as this allows us to
exercise userfaultfd minor faults on hugetlbfs.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-11-axelrasmussen@google.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Axel Rasmussen [Wed, 19 May 2021 20:03:38 +0000 (13:03 -0700)]
KVM: selftests: allow using UFFD minor faults for demand paging
UFFD handling of MINOR faults is a new feature whose use case is to
speed up demand paging (compared to MISSING faults). So, it's
interesting to let this selftest exercise this new mode.
Modify the demand paging test to have the option of using UFFD minor
faults, as opposed to missing faults. Now, when turning on userfaultfd
with '-u', the desired mode has to be specified ("MISSING" or "MINOR").
If we're in minor mode, before registering, prefault via the *alias*.
This way, the guest will trigger minor faults, instead of missing
faults, and we can UFFDIO_CONTINUE to resolve them.
Modify the page fault handler function to use the right ioctl depending
on the mode we're running in. In MINOR mode, use UFFDIO_CONTINUE.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-10-axelrasmussen@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Axel Rasmussen [Wed, 19 May 2021 20:03:37 +0000 (13:03 -0700)]
KVM: selftests: create alias mappings when using shared memory
When a memory region is added with a src_type specifying that it should
use some kind of shared memory, also create an alias mapping to the same
underlying physical pages.
And, add an API so tests can get access to these alias addresses.
Basically, for a guest physical address, let us look up the analogous
host *alias* address.
In a future commit, we'll modify the demand paging test to take
advantage of this to exercise UFFD minor faults. The idea is, we
pre-fault the underlying pages *via the alias*. When the *guest*
faults, it gets a "minor" fault (PTEs don't exist yet, but a page is
already in the page cache). Then, the userfaultfd theads can handle the
fault: they could potentially modify the underlying memory *via the
alias* if they wanted to, and then they install the PTEs and let the
guest carry on via a UFFDIO_CONTINUE ioctl.
Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-9-axelrasmussen@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Axel Rasmussen [Wed, 19 May 2021 20:03:36 +0000 (13:03 -0700)]
KVM: selftests: add shmem backing source type
This lets us run the demand paging test on top of a shmem-backed area.
In follow-up commits, we'll 1) leverage this new capability to create an
alias mapping, and then 2) use the alias mapping to exercise UFFD minor
faults.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-8-axelrasmussen@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Each struct vm_mem_backing_src_alias has a flags field, which denotes
the flags used to mmap() an area of that type. Previously, this field
never included MAP_PRIVATE | MAP_ANONYMOUS, because
vm_userspace_mem_region_add assumed that *all* types would always use
those flags, and so it hardcoded them.
In a follow-up commit, we'll add a new type: shmem. Areas of this type
must not have MAP_PRIVATE | MAP_ANONYMOUS, and instead they must have
MAP_SHARED.
So, refactor things. Make it so that the flags field of
struct vm_mem_backing_src_alias really is a complete set of flags, and
don't add in any extras in vm_userspace_mem_region_add. This will let us
easily tack on shmem.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-7-axelrasmussen@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Axel Rasmussen [Wed, 19 May 2021 20:03:34 +0000 (13:03 -0700)]
KVM: selftests: allow different backing source types
Add an argument which lets us specify a different backing memory type
for the test. The default is just to use anonymous, matching existing
behavior.
This is in preparation for testing UFFD minor faults. For that, we'll
need to use a new backing memory type which is setup with MAP_SHARED.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-6-axelrasmussen@google.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a preparatory commit needed before we can use different kinds of
backing pages for guest memory.
Previously, we used perf_test_args.host_page_size, which is the host's
native page size (commonly 4K). For VM_MEM_SRC_ANONYMOUS this turns out
to be okay, but in a follow-up commit we want to allow using different
kinds of backing memory.
Take VM_MEM_SRC_ANONYMOUS_HUGETLB for example. Without this change, if
we used that backing page type, when we issued a UFFDIO_COPY ioctl we'd
only do so with 4K, rather than the full 2M of a backing hugepage. In
this case, UFFDIO_COPY returns -EINVAL (__mcopy_atomic_hugetlb checks
the size).
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-5-axelrasmussen@google.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
r = setup_demand_paging(...);
if (r < 0) exit(-r);
Since we're just going to exit anyway, instead of returning an error we
can just re-use TEST_ASSERT. This makes the caller simpler, as well as
the function itself - no need to write our branches, etc.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-3-axelrasmussen@google.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Tue, 11 May 2021 20:21:20 +0000 (20:21 +0000)]
KVM: selftests: Print a message if /dev/kvm is missing
If a KVM selftest is run on a machine without /dev/kvm, it will exit
silently. Make it easy to tell what's happening by printing an error
message.
Opportunistically consolidate all codepaths that open /dev/kvm into a
single function so they all print the same message.
This slightly changes the semantics of vm_is_unrestricted_guest() by
changing a TEST_ASSERT() to exit(KSFT_SKIP). However
vm_is_unrestricted_guest() is only called in one place
(x86_64/mmio_warning_test.c) and that is to determine if the test should
be skipped or not.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210511202120.1371800-1-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Axel Rasmussen [Wed, 19 May 2021 20:03:30 +0000 (13:03 -0700)]
KVM: selftests: trivial comment/logging fixes
Some trivial fixes I found while touching related code in this series,
factored out into a separate commit for easier reviewing:
- s/gor/got/ and add a newline in demand_paging_test.c
- s/backing_src/src_type/ in a comment to be consistent with the real
function signature in kvm_util.c
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-2-axelrasmussen@google.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Fri, 14 May 2021 23:05:21 +0000 (23:05 +0000)]
KVM: selftests: Fix hang in hardware_disable_test
If /dev/kvm is not available then hardware_disable_test will hang
indefinitely because the child process exits before posting to the
semaphore for which the parent is waiting.
Fix this by making the parent periodically check if the child has
exited. We have to be careful to forward the child's exit status to
preserve a KSFT_SKIP status.
I considered just checking for /dev/kvm before creating the child
process, but there are so many other reasons why the child could exit
early that it seemed better to handle that as general case.
Tested:
$ ./hardware_disable_test
/dev/kvm not available, skipping test
$ echo $?
4
$ modprobe kvm_intel
$ ./hardware_disable_test
$ echo $?
0
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210514230521.2608768-1-dmatlack@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 19 May 2021 21:13:45 +0000 (21:13 +0000)]
KVM: selftests: Ignore CPUID.0DH.1H in get_cpuid_test
Similar to CPUID.0DH.0H this entry depends on the vCPU's XCR0 register
and IA32_XSS MSR. Since this test does not control for either before
assigning the vCPU's CPUID, these entries will not necessarily match
the supported CPUID exposed by KVM.
This fixes get_cpuid_test on Cascade Lake CPUs.
Suggested-by: Jim Mattson <jmattson@google.com> Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210519211345.3944063-1-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Fri, 21 May 2021 17:38:28 +0000 (17:38 +0000)]
KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()
vm_get_max_gfn() casts vm->max_gfn from a uint64_t to an unsigned int,
which causes the upper 32-bits of the max_gfn to get truncated.
Nobody noticed until now likely because vm_get_max_gfn() is only used
as a mechanism to create a memslot in an unused region of the guest
physical address space (the top), and the top of the 32-bit physical
address space was always good enough.
This fix reveals a bug in memslot_modification_stress_test which was
trying to create a dummy memslot past the end of guest physical memory.
Fix that by moving the dummy memslot lower.
Fixes: 54f835798f53 ("KVM: selftests: Remove duplicate guest mode handling") Reviewed-by: Venkatesh Srinivas <venkateshs@chromium.org> Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210521173828.1180619-1-dmatlack@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: add a memslot-related performance benchmark
This benchmark contains the following tests:
* Map test, where the host unmaps guest memory while the guest writes to
it (maps it).
The test is designed in a way to make the unmap operation on the host
take a negligible amount of time in comparison with the mapping
operation in the guest.
The test area is actually split in two: the first half is being mapped
by the guest while the second half in being unmapped by the host.
Then a guest <-> host sync happens and the areas are reversed.
* Unmap test which is broadly similar to the above map test, but it is
designed in an opposite way: to make the mapping operation in the guest
take a negligible amount of time in comparison with the unmap operation
on the host.
This test is available in two variants: with per-page unmap operation
or a chunked one (using 2 MiB chunk size).
* Move active area test which involves moving the last (highest gfn)
memslot a bit back and forth on the host while the guest is
concurrently writing around the area being moved (including over the
moved memslot).
* Move inactive area test which is similar to the previous move active
area test, but now guest writes all happen outside of the area being
moved.
* Read / write test in which the guest writes to the beginning of each
page of the test area while the host writes to the middle of each such
page.
Then each side checks the values the other side has written.
This particular test is not expected to give different results depending
on particular memslots implementation, it is meant as a rough sanity
check and to provide insight on the spread of test results expected.
Each test performs its operation in a loop until a test period ends
(this is 5 seconds by default, but it is configurable).
Then the total count of loops done is divided by the actual elapsed
time to give the test result.
The tests have a configurable memslot cap with the "-s" test option, by
default the system maximum is used.
Each test is repeated a particular number of times (by default 20
times), the best result achieved is printed.
The test memory area is divided equally between memslots, the reminder
is added to the last memslot.
The test area size does not depend on the number of memslots in use.
The tests also measure the time that it took to add all these memslots.
The best result from the tests that use the whole test area is printed
after all the requested tests are done.
In general, these tests are designed to use as much memory as possible
(within reason) while still doing 100+ loops even on high memslot counts
with the default test length.
Increasing the test runtime makes it increasingly more likely that some
event will happen on the system during the test run, which might lower
the test result.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <8d31bb3d92bc8fa33a9756fa802ee14266ab994e.1618253574.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Keep track of memslots more efficiently
The KVM selftest framework was using a simple list for keeping track of
the memslots currently in use.
This resulted in lookups and adding a single memslot being O(n), the
later due to linear scanning of the existing memslot set to check for
the presence of any conflicting entries.
Before this change, benchmarking high count of memslots was more or less
impossible as pretty much all the benchmark time was spent in the
selftest framework code.
We can simply use a rbtree for keeping track of both of gfn and hva.
We don't need an interval tree for hva here as we can't have overlapping
memslots because we allocate a completely new memory chunk for each new
memslot.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <b12749d47ee860468240cf027412c91b76dbe3db.1618253574.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 24 May 2021 12:27:38 +0000 (14:27 +0200)]
selftests: kvm: fix potential issue with ELF loading
vm_vaddr_alloc() sets up GVA to GPA mapping page by page; therefore, GPAs
may not be continuous if same memslot is used for data and page table allocation.
kvm_vm_elf_load() however expects a continuous range of HVAs (and thus GPAs)
because it does not try to read file data page by page. Fix this mismatch
by allocating memory in one step.
Reported-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / kernel.git / log