Linus Torvalds [Sat, 29 Oct 2022 00:03:00 +0000 (17:03 -0700)]
Merge tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a build warning in the jump_label code
- One of the git://github -> https://github cleanups, for the SiFive
drivers
- A fix for the kasan initialization code, this still likely warrants
some cleanups but that's a bigger problem and at least this fixes the
crashes in the short term
- A pair of fixes for extension support detection on mixed LLVM/GNU
toolchains
- A fix for a runtime warning in the /proc/cpuinfo code
* tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix /proc/cpuinfo cpumask warning
riscv: fix detection of toolchain Zihintpause support
riscv: fix detection of toolchain Zicbom support
riscv: mm: add missing memcpy in kasan_init
MAINTAINERS: git://github.com -> https://github.com for sifive
riscv: jump_label: mark arguments as const to satisfy asm constraints
Linus Torvalds [Fri, 28 Oct 2022 23:48:29 +0000 (16:48 -0700)]
Merge tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and device properties fixes from Rafael Wysocki:
"These fix device properties documentation and the ACPI PCC code, add a
new IRQ override quirk for resource handling and add one more item to
the list of device IDs to be ignored when returned by _DEP.
Specifics:
- Fix the documentation of the *_match_string() family of functions
to properly cover the return value (Andy Shevchenko)
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel)
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan)
- Add LATT2021 to the list of device IDs that are ignored when
returned by _DEP, because there are no drivers for them in the
kernel and no plans to add such drivers (Hans de Goede)"
* tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[]
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
ACPI: PCC: Fix unintentional integer overflow
device property: Fix documentation for *_match_string() APIs
Linus Torvalds [Fri, 28 Oct 2022 23:44:12 +0000 (16:44 -0700)]
Merge tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These make the intel_pstate driver work as expected on all hybrid
platforms to date (regardless of possible platform firmware issues),
fix hybrid sleep on systems using suspend-to-idle by default, make the
generic power domains code handle disabled idle states properly and
update pm-graph.
Specifics:
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki)
- Allow hybrid sleep to use suspend-to-idle as a system suspend
method if it is the current suspend method of choice (Mario
Limonciello)
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla)
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt)"
* tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Fix handling of unavailable/disabled idle states
pm-graph v5.10
cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores
cpufreq: intel_pstate: Read all MSRs on the target CPU
PM: hibernate: Allow hybrid sleep to work with s2idle
Linus Torvalds [Fri, 28 Oct 2022 20:24:57 +0000 (13:24 -0700)]
Merge tag 'rtc-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Fix wakeup support that broke on multiple platforms"
* tag 'rtc-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: cmos: fix build on non-ACPI platforms
rtc: cmos: Fix wake alarm breakage
Linus Torvalds [Fri, 28 Oct 2022 20:00:54 +0000 (13:00 -0700)]
Merge tag 'mmc-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Cancel recovery work on cleanup to avoid NULL pointer dereference
- Fix error path in the read/write error recovery path
- Fix kernel panic when remove non-standard SDIO card
- Fix WRITE_ZEROES handling for CQE
MMC host:
- sdhci_am654: Fixup Kconfig dependency for REGMAP_MMIO
- sdhci-esdhc-imx: Avoid warning of misconfigured bus-width
- sdhci-pci: Disable broken HS400 ES mode for ASUS BIOS on Jasper
Lake"
* tag 'mmc-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci_am654: 'select', not 'depends' REGMAP_MMIO
mmc: core: Fix WRITE_ZEROES CQE handling
mmc: core: Fix kernel panic when remove non-standard SDIO card
mmc: sdhci-pci-core: Disable ES for ASUS BIOS on Jasper Lake
mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus
mmc: queue: Cancel recovery work on cleanup
mmc: block: Remove error check of hw_reset on reset
Linus Torvalds [Fri, 28 Oct 2022 19:20:31 +0000 (12:20 -0700)]
Merge tag 'sound-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- fixes for regressions by the recent ALSA control hash usages
- fixes for UAF with del_timer() at removals in a few drivers
- char signedness fixes
- a few memory leak fixes in error paths
- device-specific fixes / quirks for Intel SOF, AMD, HD-audio,
USB-audio, and various ASoC codecs"
* tag 'sound-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (50 commits)
ALSA: aoa: Fix I2S device accounting
ALSA: Use del_timer_sync() before freeing timer
ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()
ALSA: rme9652: use explicitly signed char
ALSA: au88x0: use explicitly signed char
ALSA: hda/realtek: Add another HP ZBook G9 model quirks
ALSA: usb-audio: Add quirks for M-Audio Fast Track C400/600
ASoC: SOF: Intel: hda-codec: fix possible memory leak in hda_codec_device_init()
ASoC: amd: yc: Add Lenovo Thinkbook 14+ 2022 21D0 to quirks table
ASoC: Intel: Skylake: fix possible memory leak in skl_codec_device_init()
ALSA: ac97: Use snd_ctl_rename() to rename a control
ALSA: ca0106: Use snd_ctl_rename() to rename a control
ALSA: emu10k1: Use snd_ctl_rename() to rename a control
ALSA: hda/realtek: Use snd_ctl_rename() to rename a control
ALSA: usb-audio: Use snd_ctl_rename() to rename a control
ALSA: control: add snd_ctl_rename()
ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()
ASoC: SOF: Intel: pci-tgl: fix ADL-N descriptor
ASoC: qcom: lpass-cpu: Mark HDMI TX parity register as volatile
ASoC: amd: yc: Adding Lenovo ThinkBook 14 Gen 4+ ARA and Lenovo ThinkBook 16 Gen 4+ ARA to the Quirks List
...
Linus Torvalds [Fri, 28 Oct 2022 19:10:43 +0000 (12:10 -0700)]
Merge tag 'drm-fixes-2022-10-28' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regularly scheduled fixes for drm, live from a Red Hat office for the
first time in a while.
The core has two fixes, one for scheduler leak and one for aperture
uninit read.
Otherwise a single bridge fix, and msm, amdgpu/kfd and i915 have a set
of fixes each.
sched:
- Stop leaking fences when killing a sched entity.
aperture:
- Avoid uninitialized read in aperture_remove_conflicting_pci_device()
bridge:
- Fix HPD on bridge/ps8640.
msm:
- Fix shrinker deadlock
- Fix crash during suspend after unbind
- Fix IRQ lifetime issues
- Fix potential memory corruption with too many bridges
- Fix memory corruption on GPU state capture
amdkfd:
- Fix possible memory leak
- Fix GC 10.x cache info reporting
i915:
- Extend Wa_1607297627 to Alderlake-P
- Keep PCI autosuspend control 'on' by default on all dGPU
- Reset frl trained flag before restarting FRL training"
* tag 'drm-fixes-2022-10-28' of git://anongit.freedesktop.org/drm/drm: (39 commits)
fbdev/core: Avoid uninitialized read in aperture_remove_conflicting_pci_device()
drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resume
drm/scheduler: fix fence ref counting
drm/amd/display: Revert logic for plane modifiers
drm/amdkfd: correct the cache info for gfx1036
drm/amdkfd: update gfx1037 Lx cache setting
drm/amdgpu: skip mes self test for gc 11.0.3 in recover
drm/amd: Add IMU fw version to fw version queries
drm/amd/display: Don't return false if no stream
drm/amd/display: Remove wrong pipe control lock
drm/amd/pm: allow gfxoff on gc_11_0_3
drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()
drm/amdgpu: Remove ATC L2 access for MMHUB 2.1.x
drm/i915/dp: Reset frl trained flag before restarting FRL training
drm/i915/dgfx: Keep PCI autosuspend control 'on' by default on all dGPU
drm/i915: Extend Wa_1607297627 to Alderlake-P
drm/amdgpu: Adjust MES polling timeout for sriov
drm/amd/pm: update driver-if header for smu_v13_0_10
drm/amdgpu: fix pstate setting issue
drm/bridge: ps8640: Add back the 50 ms mystery delay after HPD
...
Linus Torvalds [Fri, 28 Oct 2022 16:53:30 +0000 (09:53 -0700)]
Merge tag 'v6.1-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix an alignment crash in x86/polyval"
* tag 'v6.1-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/polyval - Fix crashes when keys are not 16-byte aligned
Dave Airlie [Fri, 28 Oct 2022 02:58:33 +0000 (12:58 +1000)]
Merge tag 'drm-misc-fixes-2022-10-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.1-rc3:
- Fix HPD on bridge/ps8640.
- Stop leaking fences when killing a sched entity.
- Avoid uninitialized read in aperture_remove_conflicting_pci_device()
Andrew Jones [Fri, 14 Oct 2022 15:58:44 +0000 (17:58 +0200)]
RISC-V: Fix /proc/cpuinfo cpumask warning
Commit b55d5df4cb41 ("cpumask: fix checking valid cpu range") has
started issuing warnings[*] when cpu indices equal to nr_cpu_ids - 1
are passed to cpumask_next* functions. seq_read_iter() and cpuinfo's
start and next seq operations implement a pattern like
n = cpumask_next(n - 1, mask);
show(n);
while (1) {
++n;
n = cpumask_next(n - 1, mask);
if (n >= nr_cpu_ids)
break;
show(n);
}
which will issue the warning when reading /proc/cpuinfo. Ensure no
warning is generated by validating the cpu index before calling
cpumask_next().
[*] Warnings will only appear with DEBUG_PER_CPU_MAPS enabled.
Palmer Dabbelt [Thu, 27 Oct 2022 22:09:50 +0000 (15:09 -0700)]
Merge patch series "Fix RISC-V toolchain extension support detection"
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
This came up due to a report from Kevin @ kernel-ci, who had been
running a mixed configuration of GNU binutils and clang. Their compiler
was relatively recent & supports Zicbom but binutils @ 2.35.2 did not.
Our current checks for extension support only cover the compiler, but it
appears to me that we need to check both the compiler & linker support
in case of "pot-luck" configurations that mix different versions of
LD,AS,CC etc.
Linker support does not seem possible to actually check, since the ISA
string is emitted into the object files - so I put in version checks for
that. The checks have gotten a bit ugly since 32 & 64 bit support need
to be checked independently but ahh well.
As I was going, I fell into the trap of there being duplicated checks
for CC support in both the Makefile and Kconfig, so as part of renaming
the Kconfig symbol to TOOLCHAIN_HAS_FOO, I dropped the extra checks in
the Makefile. This has the added advantage of the TOOLCHAIN_HAS_FOO
symbol for Zihintpause appearing in .config.
I pushed out a version of this that specificly checked for assember
support for LKP to test & it looked /okay/ - but I did some more testing
today and realised that this is redudant & have since dropped the as
check.
I tested locally with a fair few different combinations, to try and
cover each of AS, LD, CC missing support for the extension.
* b4-shazam-merge:
riscv: fix detection of toolchain Zihintpause support
riscv: fix detection of toolchain Zicbom support
Conor Dooley [Thu, 6 Oct 2022 17:35:21 +0000 (18:35 +0100)]
riscv: fix detection of toolchain Zihintpause support
It is not sufficient to check if a toolchain supports a particular
extension without checking if the linker supports that extension
too. For example, Clang 15 supports Zihintpause but GNU bintutils
2.35.2 does not, leading build errors like so:
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zihintpause2p0: Invalid or unknown z ISA extension: 'zihintpause'
Add a TOOLCHAIN_HAS_ZIHINTPAUSE which checks if each of the compiler,
assembler and linker support the extension. Replace the ifdef in the
vdso with one depending on this new symbol.
Conor Dooley [Thu, 6 Oct 2022 17:35:20 +0000 (18:35 +0100)]
riscv: fix detection of toolchain Zicbom support
It is not sufficient to check if a toolchain supports a particular
extension without checking if the linker supports that extension too.
For example, Clang 15 supports Zicbom but GNU bintutils 2.35.2 does
not, leading build errors like so:
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicbom1p0_zihintpause2p0: Invalid or unknown z ISA extension: 'zicbom'
Convert CC_HAS_ZICBOM to TOOLCHAIN_HAS_ZICBOM & check if the linker
also supports Zicbom.
Qinglin Pan [Sun, 9 Oct 2022 08:30:50 +0000 (16:30 +0800)]
riscv: mm: add missing memcpy in kasan_init
Hi Atish,
It seems that the panic is due to the missing memcpy during kasan_init.
Could you please check whether this patch is helpful?
When doing kasan_populate, the new allocated base_pud/base_p4d should
contain kasan_early_shadow_{pud, p4d}'s content. Add the missing memcpy
to avoid page fault when read/write kasan shadow region.
Tested on:
- qemu with sv57 and CONFIG_KASAN on.
- qemu with sv48 and CONFIG_KASAN on.
Linus Torvalds [Thu, 27 Oct 2022 20:36:59 +0000 (13:36 -0700)]
Merge tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from 802.15.4 (Zigbee et al).
Current release - regressions:
- ipa: fix bugs in the register conversion for IPA v3.1 and v3.5.1
Current release - new code bugs:
- mptcp: fix abba deadlock on fastopen
- eth: stmmac: rk3588: allow multiple gmac controllers in one system
Previous releases - regressions:
- ip: rework the fix for dflt addr selection for connected nexthop
- net: couple more fixes for misinterpreting bits in struct page
after the signature was added
Previous releases - always broken:
- ipv6: ensure sane device mtu in tunnels
- openvswitch: switch from WARN to pr_warn on a user-triggerable path
- ethtool: eeprom: fix null-deref on genl_info in dump
- ieee802154: more return code fixes for corner cases in
dgram_sendmsg
- mac802154: fix link-quality-indicator recording
- eth: mlx5: fixes for IPsec, PTP timestamps, OvS and conntrack
offload
- eth: fec: limit register access on i.MX6UL
- eth: bcm4908_enet: update TX stats after actual transmission
- can: rcar_canfd: improve IRQ handling for RZ/G2L
Misc:
- genetlink: piggy back on the newly added resv_op_start to enforce
more sanity checks on new commands"
* tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
net: enetc: survive memory pressure without crashing
kcm: do not sense pfmemalloc status in kcm_sendpage()
net: do not sense pfmemalloc status in skb_append_pagefrags()
net/mlx5e: Fix macsec sci endianness at rx sa update
net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
net/mlx5e: Fix macsec rx security association (SA) update/delete
net/mlx5e: Fix macsec coverity issue at rx sa update
net/mlx5: Fix crash during sync firmware reset
net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
net/mlx5e: TC, Reject forwarding from internal port to internal port
net/mlx5: Fix possible use-after-free in async command interface
net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
net/mlx5e: Update restore chain id for slow path packets
net/mlx5e: Extend SKB room check to include PTP-SQ
net/mlx5: DR, Fix matcher disconnect error flow
net/mlx5: Wait for firmware to enable CRS before pci_restore_state
net/mlx5e: Do not increment ESN when updating IPsec ESN state
netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed
netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed
...
Linus Torvalds [Thu, 27 Oct 2022 20:16:36 +0000 (13:16 -0700)]
Merge tag 'execve-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fixes from Kees Cook:
- Fix an ancient signal action copy race (Bernd Edlinger)
- Fix a memory leak in ELF loader, when under memory pressure (Li
Zetao)
* tag 'execve-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fs/binfmt_elf: Fix memory leak in load_elf_binary()
exec: Copy oldsighand->action under spin-lock
Linus Torvalds [Thu, 27 Oct 2022 19:31:57 +0000 (12:31 -0700)]
Merge tag 'hardening-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Fix older Clang vs recent overflow KUnit test additions (Nick
Desaulniers, Kees Cook)
- Fix kern-doc visibility for overflow helpers (Kees Cook)
* tag 'hardening-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
overflow: Refactor test skips for Clang-specific issues
overflow: disable failing tests for older clang versions
overflow: Fix kern-doc markup for functions
Linus Torvalds [Thu, 27 Oct 2022 19:21:57 +0000 (12:21 -0700)]
Merge tag 'media/v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A bunch of patches addressing issues in the vivid driver and adding
new checks in V4L2 to validate the input parameters from some ioctls"
* tag 'media/v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vivid.rst: loop_video is set on the capture devnode
media: vivid: set num_in/outputs to 0 if not supported
media: vivid: drop GFP_DMA32
media: vivid: fix control handler mutex deadlock
media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'
media: v4l2-dv-timings: add sanity checks for blanking values
media: vivid: dev->bitmap_cap wasn't freed in all cases
media: vivid: s_fbuf: add more sanity checks
Vladimir Oltean [Thu, 27 Oct 2022 18:29:25 +0000 (21:29 +0300)]
net: enetc: survive memory pressure without crashing
Under memory pressure, enetc_refill_rx_ring() may fail, and when called
during the enetc_open() -> enetc_setup_rxbdr() procedure, this is not
checked for.
An extreme case of memory pressure will result in exactly zero buffers
being allocated for the RX ring, and in such a case it is expected that
hardware drops all RX packets due to lack of buffers.
This does not happen, because the reset-default value of the consumer
and produces index is 0, and this makes the ENETC think that all buffers
have been initialized and that it owns them (when in reality none were).
The hardware guide explains this best:
| Configure the receive ring producer index register RBaPIR with a value
| of 0. The producer index is initially configured by software but owned
| by hardware after the ring has been enabled. Hardware increments the
| index when a frame is received which may consume one or more BDs.
| Hardware is not allowed to increment the producer index to match the
| consumer index since it is used to indicate an empty condition. The ring
| can hold at most RBLENR[LENGTH]-1 received BDs.
|
| Configure the receive ring consumer index register RBaCIR. The
| consumer index is owned by software and updated during operation of the
| of the BD ring by software, to indicate that any receive data occupied
| in the BD has been processed and it has been prepared for new data.
| - If consumer index and producer index are initialized to the same
| value, it indicates that all BDs in the ring have been prepared and
| hardware owns all of the entries.
| - If consumer index is initialized to producer index plus N, it would
| indicate N BDs have been prepared. Note that hardware cannot start if
| only a single buffer is prepared due to the restrictions described in
| (2).
| - Software may write consumer index to match producer index anytime
| while the ring is operational to indicate all received BDs prior have
| been processed and new BDs prepared for hardware.
Normally, the value of rx_ring->rcir (consumer index) is brought in sync
with the rx_ring->next_to_use software index, but this only happens if
page allocation ever succeeded.
When PI==CI==0, the hardware appears to receive frames and write them to
DMA address 0x0 (?!), then set the READY bit in the BD.
The enetc_clean_rx_ring() function (and its XDP derivative) is naturally
not prepared to handle such a condition. It will attempt to process
those frames using the rx_swbd structure associated with index i of the
RX ring, but that structure is not fully initialized (enetc_new_page()
does all of that). So what happens next is undefined behavior.
To operate using no buffer, we must initialize the CI to PI + 1, which
will block the hardware from advancing the CI any further, and drop
everything.
The issue was seen while adding support for zero-copy AF_XDP sockets,
where buffer memory comes from user space, which can even decide to
supply no buffers at all (example: "xdpsock --txonly"). However, the bug
is present also with the network stack code, even though it would take a
very determined person to trigger a page allocation failure at the
perfect time (a series of ifup/ifdown under memory pressure should
eventually reproduce it given enough retries).
Fixes: 40a200dc9f33 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20221027182925.3256653-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Thu, 27 Oct 2022 04:03:46 +0000 (04:03 +0000)]
net: do not sense pfmemalloc status in skb_append_pagefrags()
skb_append_pagefrags() is used by af_unix and udp sendpage()
implementation so far.
In commit 7c020b8840f4 ("tcp: TX zerocopy should not sense
pfmemalloc status") we explained why we should not sense
pfmemalloc status for pages owned by user space.
We should also use skb_fill_page_desc_noacc()
in skb_append_pagefrags() to avoid following KCSAN report:
BUG: KCSAN: data-race in lru_add_fn / skb_append_pagefrags
value changed: 0x0000000000000000 -> 0xffffea00058fc188
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17325 Comm: syz-executor.0 Not tainted 6.1.0-rc1-syzkaller-00158-g440b7895c990-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
Fixes: 7c020b8840f4 ("tcp: TX zerocopy should not sense pfmemalloc status") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221027040346.1104204-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Raed Salem [Wed, 26 Oct 2022 13:51:53 +0000 (14:51 +0100)]
net/mlx5e: Fix macsec sci endianness at rx sa update
The cited commit at rx sa update operation passes the sci object
attribute, in the wrong endianness and not as expected by the HW
effectively create malformed hw sa context in case of update rx sa
consequently, HW produces unexpected MACsec packets which uses this
sa.
Fix by passing sci to create macsec object with the correct endianness,
while at it add __force u64 to prevent sparse check error of type
"sparse: error: incorrect type in assignment".
Raed Salem [Wed, 26 Oct 2022 13:51:52 +0000 (14:51 +0100)]
net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
The cited commit produces a sparse check error of type
"sparse: error: restricted __be64 degrades to integer". The
offending line wrongly did a bitwise operation between two different
storage types one of 64 bit when the other smaller side is 16 bit
which caused the above sparse error, furthermore bitwise operation
usage here is wrong in the first place as the constant MACSEC_PORT_ES
is not a bitwise field.
Fix by using the right mask to get the lower 16 bit if the sci number,
and use comparison operator '==' instead of bitwise '&' operator.
Raed Salem [Wed, 26 Oct 2022 13:51:51 +0000 (14:51 +0100)]
net/mlx5e: Fix macsec rx security association (SA) update/delete
The cited commit adds the support for update/delete MACsec Rx SA,
naturally, these operations need to check if the SA in question exists
to update/delete the SA and return error code otherwise, however they
do just the opposite i.e. return with error if the SA exists
Fix by change the check to return error in case the SA in question does
not exist, adjust error message and code accordingly.
Raed Salem [Wed, 26 Oct 2022 13:51:50 +0000 (14:51 +0100)]
net/mlx5e: Fix macsec coverity issue at rx sa update
The cited commit at update rx sa operation passes object attributes
to MACsec object create function without initializing/setting all
attributes fields leaving some of them with garbage values, therefore
violating the implicit assumption at create object function, which
assumes that all input object attributes fields are set.
Fix by initializing the object attributes struct to zero, thus leaving
unset fields with the legal zero value.
When setting Bluefield to DPU NIC mode using mlxconfig tool + sync
firmware reset flow, we run into scenario where the host was not
eswitch manager at the time of mlx5 driver load but becomes eswitch manager
after the sync firmware reset flow. This results in null pointer
access of mpfs structure during mac filter add. This change prevents null
pointer access but mpfs table entries will not be added.
Fixes: 58c6894aa3af ("net/mlx5: Add support for devlink reload action fw activate") Signed-off-by: Suresh Devarakonda <ramad@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-12-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roy Novich [Wed, 26 Oct 2022 13:51:48 +0000 (14:51 +0100)]
net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
Update devlink health fw fatal reporter state to "healthy" is needed by
strictly calling devlink_health_reporter_state_update() after recovery
was done by PCI error handler. This is needed when fw_fatal reporter was
triggered due to PCI error. Poll health is called and set reporter state
to error. Health recovery failed (since EEH didn't re-enable the PCI).
PCI handlers keep on recover flow and succeed later without devlink
acknowledgment. Fix this by adding devlink state update at the end of
the PCI handler recovery process.
Fixes: 9f97bae32159 ("devlink: add support for reporter recovery completion") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-11-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roi Dayan [Wed, 26 Oct 2022 13:51:47 +0000 (14:51 +0100)]
net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
On multi table split the driver creates a new attr instance with
data being copied from prev attr instance zeroing action flags.
Also need to reset dests properties to avoid incorrect dests per attr.
Fixes: eab22a3adb09 ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-10-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ariel Levkovich [Wed, 26 Oct 2022 13:51:46 +0000 (14:51 +0100)]
net/mlx5e: TC, Reject forwarding from internal port to internal port
Reject TC rules that forward from internal port to internal port
as it is not supported.
This include rules that are explicitly have internal port as
the filter device as well as rules that apply on tunnel interfaces
as the route device for the tunnel interface can be an internal
port.
Fixes: b8c4d8174a56 ("net/mlx5e: Offload tc rules that redirect to ovs internal port") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-9-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan [Wed, 26 Oct 2022 13:51:45 +0000 (14:51 +0100)]
net/mlx5: Fix possible use-after-free in async command interface
mlx5_cmd_cleanup_async_ctx should return only after all its callback
handlers were completed. Before this patch, the below race between
mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and
lead to a use-after-free:
1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e.
elevated by 1, a single inflight callback).
2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1.
3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and
is about to call wake_up().
4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns
immediately as the condition (num_inflight == 0) holds.
5. mlx5_cmd_cleanup_async_ctx returns.
6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx
object.
7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed
object.
Fix it by syncing using a completion object. Mark it completed when
num_inflight reaches 0.
Trace:
BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270
Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0
Saeed Mahameed [Wed, 26 Oct 2022 13:51:44 +0000 (14:51 +0100)]
net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
mlx5 SQs must select the timestamp format explicitly according to the
active clock mode, select the current active timestamp mode so ASO SQ create
will succeed.
This fixes the following error prints when trying to create ipsec ASO SQ
while the timestamp format is real time mode.
mlx5_cmd_out_err:778:(pid 34874): CREATE_SQ(0x904) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xd61c0b), err(-22)
mlx5_aso_create_sq:285:(pid 34874): Failed to open aso wq sq, err=-22
mlx5e_ipsec_init:436:(pid 34874): IPSec initialization failed, -22
Fixes: 8a033da206b2 ("net/mlx5: Add support to create SQ and CQ for ASO") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reported-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-7-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Wed, 26 Oct 2022 13:51:43 +0000 (14:51 +0100)]
net/mlx5e: Update restore chain id for slow path packets
Currently encap slow path rules just forward to software without
setting the chain id miss register, so driver doesn't restore
the chain, and packets hitting this rule will restart from tc chain
0 instead of continuing to the chain the encap rule was on.
Fix this by setting the chain id miss register to the chain id mapping.
Fixes: 08893db24614 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-6-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aya Levin [Wed, 26 Oct 2022 13:51:42 +0000 (14:51 +0100)]
net/mlx5e: Extend SKB room check to include PTP-SQ
When tx_port_ts is set, the driver diverts all UPD traffic over PTP port
to a dedicated PTP-SQ. The SKBs are cached until the wire-CQE arrives.
When the packet size is greater then MTU, the firmware might drop it and
the packet won't be transmitted to the wire, hence the wire-CQE won't
reach the driver. In this case the SKBs are accumulated in the SKB fifo.
Add room check to consider the PTP-SQ SKB fifo, when the SKB fifo is
full, driver stops the queue resulting in a TX timeout. Devlink
TX-reporter can recover from it.
Fixes: f90a1134a383 ("net/mlx5e: Add TX port timestamp support") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-5-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rongwei Liu [Wed, 26 Oct 2022 13:51:41 +0000 (14:51 +0100)]
net/mlx5: DR, Fix matcher disconnect error flow
When 2nd flow rules arrives, it will merge together with the
1st one if matcher criteria is the same.
If merge fails, driver will rollback the merge contents, and
reject the 2nd rule. At rollback stage, matcher can't be
disconnected unconditionally, otherise the 1st rule can't be
hit anymore.
Add logic to check if the matcher should be disconnected or not.
Fixes: 9e165e6798d3 ("net/mlx5: DR, Improve steering for empty or RX/TX-only matchers") Signed-off-by: Rongwei Liu <rongweil@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-4-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Moshe Shemesh [Wed, 26 Oct 2022 13:51:40 +0000 (14:51 +0100)]
net/mlx5: Wait for firmware to enable CRS before pci_restore_state
After firmware reset driver should verify firmware already enabled CRS
and became responsive to pci config cycles before restoring pci state.
Fix that by waiting till device_id is readable through PCI again.
Hyong Youb Kim [Wed, 26 Oct 2022 13:51:39 +0000 (14:51 +0100)]
net/mlx5e: Do not increment ESN when updating IPsec ESN state
An offloaded SA stops receiving after about 2^32 + replay_window
packets. For example, when SA reaches <seq-hi 0x1, seq 0x2c>, all
subsequent packets get dropped with SA-icv-failure (integrity_failed).
To reproduce the bug:
- ConnectX-6 Dx with crypto enabled (FW 22.30.1004)
- ipsec.conf:
nic-offload = yes
replay-window = 32
esn = yes
salifetime=24h
- Run netperf for a long time to send more than 2^32 packets
netperf -H <device-under-test> -t TCP_STREAM -l 20000
When 2^32 + replay_window packets are received, the replay window
moves from the 2nd half of subspace (overlap=1) to the 1st half
(overlap=0). The driver then updates the 'esn' value in NIC
(i.e. seq_hi) as follows.
seq_hi = xfrm_replay_seqhi(seq_bottom)
new esn in NIC = seq_hi + 1
The +1 increment is wrong, as seq_hi already contains the correct
seq_hi. For example, when seq_hi=1, the driver actually tells NIC to
use seq_hi=2 (esn). This incorrect esn value causes all subsequent
packets to fail integrity checks (SA-icv-failure). So, do not
increment.
Fixes: 3bd5d190cb51 ("net/mlx5: IPSec, Add support for ESN") Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com> Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-2-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhengchao Shao [Wed, 26 Oct 2022 01:46:42 +0000 (09:46 +0800)]
netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed
Remove dir in nsim_dev_debugfs_init() when creating ports dir failed.
Otherwise, the netdevsim device will not be created next time. Kernel
reports an error: debugfs: Directory 'netdevsim1' with parent 'netdevsim'
already present!
Fixes: 67737eb43aac ("netdevsim: change debugfs tree topology") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhengchao Shao [Wed, 26 Oct 2022 01:54:05 +0000 (09:54 +0800)]
netdevsim: fix memory leak in nsim_bus_dev_new()
If device_register() failed in nsim_bus_dev_new(), the value of reference
in nsim_bus_dev->dev is 1. obj->name in nsim_bus_dev->dev will not be
released.
Jakub Kicinski [Thu, 27 Oct 2022 17:30:41 +0000 (10:30 -0700)]
Merge tag 'linux-can-fixes-for-6.1-20221027' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-10-27
Anssi Hannula fixes the use of the completions in the kvaser_usb
driver.
Biju Das contributes 2 patches for the rcar_canfd driver. A IRQ storm
that can be triggered by high CAN bus load and channel specific IRQ
handlers are fixed.
Yang Yingliang fixes the j1939 transport protocol by moving a
kfree_skb() out of a spin_lock_irqsave protected section.
* tag 'linux-can-fixes-for-6.1-20221027' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb()
can: rcar_canfd: fix channel specific IRQ handling for RZ/G2L
can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global FIFO receive
can: kvaser_usb: Fix possible completions during init_completion
====================
Rafał Miłecki [Thu, 27 Oct 2022 11:24:30 +0000 (13:24 +0200)]
net: broadcom: bcm4908_enet: update TX stats after actual transmission
Queueing packets doesn't guarantee their transmission. Update TX stats
after hardware confirms consuming submitted data.
This also fixes a possible race and NULL dereference.
bcm4908_enet_start_xmit() could try to access skb after freeing it in
the bcm4908_enet_poll_tx().
====================
ip: rework the fix for dflt addr selection for connected nexthop"
This series reworks the fix that is reverted in the second commit.
As Julian explained, nhc_scope is related to nhc_gw, it's not the scope of
the route.
====================
Nicolas Dichtel [Thu, 20 Oct 2022 10:09:52 +0000 (12:09 +0200)]
nh: fix scope used to find saddr when adding non gw nh
As explained by Julian, fib_nh_scope is related to fib_nh_gw4, but
fib_info_update_nhc_saddr() needs the scope of the route, which is
the scope "before" fib_nh_scope, ie fib_nh_scope - 1.
This patch fixes the problem described in commit 4be009aa4a33 ("ip: fix
dflt addr selection for connected nexthop").
As explained by Julian, nhc_scope is related to nhc_gw, not to the route.
Revert the original patch. The initial problem is fixed differently in the
next commit.
Jakub Kicinski [Wed, 26 Oct 2022 00:15:24 +0000 (17:15 -0700)]
genetlink: limit the use of validation workarounds to old ops
During review of previous change another thing came up - we should
limit the use of validation workarounds to old commands.
Don't list the workarounds one by one, as we're rejecting all existing
ones. We can deal with the masking in the unlikely event that new flag
is added.
Florian Fainelli [Tue, 25 Oct 2022 23:42:01 +0000 (16:42 -0700)]
net: bcmsysport: Indicate MAC is in charge of PHY PM
Avoid the PHY library call unnecessarily into the suspend/resume
functions by setting phydev->mac_managed_pm to true. The SYSTEMPORT
driver essentially does exactly what mdio_bus_phy_resume() does by
calling phy_resume().
Yang Yingliang [Thu, 27 Oct 2022 09:12:37 +0000 (17:12 +0800)]
can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb()
It is not allowed to call kfree_skb() from hardware interrupt context
or with interrupts being disabled. The skb is unlinked from the queue,
so it can be freed after spin_unlock_irqrestore().
Fixes: 877b9bba3266 ("can: add support of SAE J1939 protocol") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20221027091237.2290111-1-yangyingliang@huawei.com Cc: stable@vger.kernel.org
[mkl: adjust subject] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yang Yingliang [Tue, 25 Oct 2022 13:00:11 +0000 (21:00 +0800)]
net: ehea: fix possible memory leak in ehea_register_port()
If of_device_register() returns error, the of node and the
name allocated in dev_set_name() is leaked, call put_device()
to give up the reference that was set in device_initialize(),
so that of node is put in logical_port_release() and the name
is freed in kobject_cleanup().
====================
openvswitch: syzbot splat fix and introduce selftest
Syzbot recently caught a splat when dropping features from
openvswitch datapaths that are in-use. The WARN() call is
definitely too large a hammer for the situation, so change
to pr_warn.
Second patch in the series introduces a new selftest suite which
can help show that an issue is fixed. This change might be
more suited to net-next tree, so it has been separated out
as an additional patch and can be either applied to either tree
based on preference.
====================
Aaron Conole [Tue, 25 Oct 2022 10:50:18 +0000 (06:50 -0400)]
selftests: add openvswitch selftest suite
Previous commit resolves a WARN splat that can be difficult to reproduce,
but with the ovs-dpctl.py utility, it can be trivial. Introduce a test
case which creates a DP, and then downgrades the feature set. This will
include a utility 'ovs-dpctl.py' that can be extended to do additional
tests and diagnostics.
Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Aaron Conole [Tue, 25 Oct 2022 10:50:17 +0000 (06:50 -0400)]
openvswitch: switch from WARN to pr_warn
As noted by Paolo Abeni, pr_warn doesn't generate any splat and can still
preserve the warning to the user that feature downgrade occurred. We
likely cannot introduce other kinds of checks / enforcement here because
syzbot can generate different genl versions to the datapath.
Reported-by: syzbot+31cde0bef4bbf8ba2d86@syzkaller.appspotmail.com Fixes: c5d24faa13b4 ("openvswitch: Drop user features if old user space attempted to create datapath") Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Ilya Maximets <i.maximets@ovn.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch series fixes the below issues in R-Car CAN-FD driver.
1) Race condition in CAN driver under heavy CAN load condition
with both channels enabled results in IRQ storm on global FIFO
receive IRQ line.
2) Add channel specific TX interrupts handling for RZ/G2L SoC as it has
separate IRQ lines for each TX.
changes since v1: https://lore.kernel.org/all/20221022081503.1051257-1-biju.das.jz@bp.renesas.com
* Added check for IRQ active and enabled before handling the IRQ on a
particular channel.
Biju Das [Tue, 25 Oct 2022 15:56:56 +0000 (16:56 +0100)]
can: rcar_canfd: fix channel specific IRQ handling for RZ/G2L
RZ/G2L has separate channel specific IRQs for transmit and error
interrupts. But the IRQ handler processes both channels, even if there
no interrupt occurred on one of the channels.
This patch fixes the issue by passing a channel specific context
parameter instead of global one for the IRQ register and the IRQ
handler, it just handles the channel which is triggered the interrupt.
Fixes: 53f37e24dc63 ("can: rcar_canfd: Add support for RZ/G2L family") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/all/20221025155657.1426948-3-biju.das.jz@bp.renesas.com Cc: stable@vger.kernel.org
[mkl: adjust commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Biju Das [Tue, 25 Oct 2022 15:56:55 +0000 (16:56 +0100)]
can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global FIFO receive
We are seeing an IRQ storm on the global receive IRQ line under heavy
CAN bus load conditions with both CAN channels enabled.
Conditions:
The global receive IRQ line is shared between can0 and can1, either of
the channels can trigger interrupt while the other channel's IRQ line
is disabled (RFIE).
When global a receive IRQ interrupt occurs, we mask the interrupt in
the IRQ handler. Clearing and unmasking of the interrupt is happening
in rx_poll(). There is a race condition where rx_poll() unmasks the
interrupt, but the next IRQ handler does not mask the IRQ due to
NAPIF_STATE_MISSED flag (e.g.: can0 RX FIFO interrupt is disabled and
can1 is triggering RX interrupt, the delay in rx_poll() processing
results in setting NAPIF_STATE_MISSED flag) leading to an IRQ storm.
This patch fixes the issue by checking IRQ active and enabled before
handling the IRQ on a particular channel.
Fixes: 446e069525e2 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/all/20221025155657.1426948-2-biju.das.jz@bp.renesas.com Cc: stable@vger.kernel.org
[mkl: adjust commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Anssi Hannula [Mon, 10 Oct 2022 18:52:27 +0000 (20:52 +0200)]
can: kvaser_usb: Fix possible completions during init_completion
kvaser_usb uses completions to signal when a response event is received
for outgoing commands.
However, it uses init_completion() to reinitialize the start_comp and
stop_comp completions before sending the start/stop commands.
In case the device sends the corresponding response just before the
actual command is sent, complete() may be called concurrently with
init_completion() which is not safe.
This might be triggerable even with a properly functioning device by
stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which
also causes the driver to send CMD_STOP_CHIP when restart-ms is off),
but that was not tested.
Fix the issue by using reinit_completion() instead.
Fixes: d9f21bf91c45 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Takashi Iwai [Thu, 27 Oct 2022 06:52:33 +0000 (08:52 +0200)]
ALSA: aoa: Fix I2S device accounting
i2sbus_add_dev() is supposed to return the number of probed devices,
i.e. either 1 or 0. However, i2sbus_add_dev() has one error handling
that returns -ENODEV; this will screw up the accumulation number
counted in the caller, i2sbus_probe().
Fix the return value to 0 and add the comment for better understanding
for readers.
Instead just use del_timer_sync() which will wait for the timer to finish
before continuing. No need to check if the timer is active or not when
doing so.
This doesn't fix the race of a possible re-arming of the timer, but at
least it won't use the data that has just been freed.
Yang Yingliang [Thu, 27 Oct 2022 01:34:38 +0000 (09:34 +0800)]
ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()
dev_set_name() in soundbus_add_one() allocates memory for name, it need be
freed when of_device_register() fails, call soundbus_dev_put() to give up
the reference that hold in device_initialize(), so that it can be freed in
kobject_cleanup() when the refcount hit to 0. And other resources are also
freed in i2sbus_release_dev(), so it can return 0 directly.
Takashi Iwai [Thu, 27 Oct 2022 06:26:32 +0000 (08:26 +0200)]
Merge tag 'asoc-fix-v6.1-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.1
Quite a few fixes here, a lot driver specific, plus some new quirks.
There was a bit of a mess with the runtime PM handling due to some
confusion in the API there which resulted in a number of commits and
reverts but that should all be stable now.
Dave Airlie [Thu, 27 Oct 2022 04:51:04 +0000 (14:51 +1000)]
Merge tag 'drm-msm-fixes-2022-10-24' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm-fixes for v6.1
- Fix shrinker deadlock
- Fix crash during suspend after unbind
- Fix IRQ lifetime issues
- Fix potential memory corruption with too many bridges
- Fix memory corruption on GPU state capture
Kunihiko Hayashi [Mon, 24 Oct 2022 07:22:27 +0000 (16:22 +0900)]
net: ethernet: ave: Fix MAC to be in charge of PHY PM
The phylib callback is called after MAC driver's own resume callback is
called. For AVE driver, after resuming immediately, PHY state machine is
in PHY_NOLINK because there is a time lag from link-down to link-up due to
autoneg. The result is WARN_ON() dump in mdio_bus_phy_resume().
Since ave_resume() itself calls phy_resume(), AVE driver should manage
PHY PM. To indicate that MAC driver manages PHY PM, set
phydev->mac_managed_pm to true to avoid the unnecessary phylib call and
add missing phy_init_hw() to ave_resume().
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: d6f853caf863 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20221024072227.24769-1-hayashi.kunihiko@socionext.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Juergen Borleis [Mon, 24 Oct 2022 08:05:52 +0000 (10:05 +0200)]
net: fec: limit register access on i.MX6UL
Using 'ethtool -d […]' on an i.MX6UL leads to a kernel crash:
Unhandled fault: external abort on non-linefetch (0x1008) at […]
due to this SoC has less registers in its FEC implementation compared to other
i.MX6 variants. Thus, a run-time decision is required to avoid access to
non-existing registers.
Fixes: 445ed38ace6a ("net: fec: use a more proper compatible string for i.MX6UL type device") Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221024080552.21004-1-jbe@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 27 Oct 2022 00:44:10 +0000 (17:44 -0700)]
Merge tag 'perf-tools-fixes-for-v6.1-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool fixes from Arnaldo Carvalho de Melo:
- Fix some aspects of building with an older (than the one in the
kernel sources) libbpf present in a distro, when building with
LIBBPF_DYNAMIC=1.
- Fix errno setting races with event_fd and the signal handler in 'perf
record'.
- Fix Power10 hv-24x7 metric events when some events may have a zero
count based on system configuration.
- Do not fail Intel-PT misc test w/o libpython, just skip it.
- Fix incorrect arm64 Hisi hip08 L3 metrics (IF_BP_MISP_BR_RET,
IF_BP_MISP_BR_RET, IF_BP_MISP_BR_BL) due to mistakes in the
documentation used to generate the JSON files for these metrics.
- Fix auxtrace (Intel PT, ARM Coresight) address filter symbol name
match for modules, we need to skip the module name.
- Sync copies of files with the kernel sources, including ppc syscall
tables and assorted headers, some resulting in tools being able to
decode new network protocols (IPPROTO_L2TP) and statx masks
(STATX_DIOALIGN).
- Fix PMU name pai_crypto in the vendor events file (JSON) for s390.
- Fix man page build wrt perf-arm-coresight.txt as the build process
assumes files starting with 'perf-' are man pages, and this file
isn't one.
* tag 'perf-tools-fixes-for-v6.1-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf vendor events arm64: Fix incorrect Hisi hip08 L3 metrics
perf auxtrace: Fix address filter symbol name match for modules
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers uapi: Sync linux/stat.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers uapi: Update linux/in.h copy
tools headers: Update the copy of x86's memcpy_64.S used in 'perf bench'
tools headers arm64: Sync arm64's cputype.h with the kernel sources
perf test: Do not fail Intel-PT misc test w/o libpython
perf list: Fix PMU name pai_crypto in perf list on s390
perf record: Fix event fd races
perf bpf: Fix build with libbpf 0.7.0 by checking if bpf_program__set_insns() is available
perf bpf: Fix build with libbpf 0.7.0 by adding prototype for bpf_load_program()
perf vendor events power10: Fix hv-24x7 metric events
perf docs: Fix man page build wrt perf-arm-coresight.txt
tools headers UAPI: Sync powerpc syscall tables with the kernel sources
Linus Torvalds [Thu, 27 Oct 2022 00:38:46 +0000 (17:38 -0700)]
Merge tag 'spi-fix-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of mostly unremarkable fixes for SPI that have built up
since the merge window, all driver specific.
The change to the qup adding support for GPIO chip selects is fixing a
regression due to the removal of legacy GPIO handling, the driver had
previously been silently relying on the legacy GPIO support in a
slightly broken way which worked well enough on some systems. Fixing
it is simply a case of setting a couple of bits of information in the
driver description"
* tag 'spi-fix-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: aspeed: Fix window offset of CE1
spi: qup: support using GPIO as chip select line
spi: intel: Fix the offset to get the 64K erase opcode
spi: aspeed: Fix typo in mode_bits field for AST2600 platform
spi: mpc52xx: Replace NO_IRQ by 0
spi: spi-mem: Fix typo (of -> or)
spi: spi-gxp: fix typo in SPDX identifier line
spi: tegra210-quad: Fix combined sequence
Prike Liang [Fri, 21 Oct 2022 02:04:40 +0000 (10:04 +0800)]
drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resume
In the S2idle suspend/resume phase the gfxoff is keeping functional so
some IP blocks will be likely to reinitialize at gfxoff entry and that
will result in failing to program GC registers.Therefore, let disallow
gfxoff until AMDGPU IPs reinitialized completely.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.15.x
Commit dd705060a09c0bcf ("perf vendor events arm64: Add Hisi hip08 L3
metrics") add L3 metrics of hip08, but some metrics (IF_BP_MISP_BR_RET,
IF_BP_MISP_BR_RET, IF_BP_MISP_BR_BL) have incorrect event number due to
the mistakes in document, which caused incorrect result. Fix the
incorrect metrics.
Adrian Hunter [Wed, 26 Oct 2022 07:27:36 +0000 (10:27 +0300)]
perf auxtrace: Fix address filter symbol name match for modules
For modules, names from kallsyms__parse() contain the module name which
meant that module symbols did not match exactly by name.
Fix by matching the name string up to the separating tab character.
Fixes: 9b395806b305daed ("perf record: Add support for using symbols in address filters") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221026072736.2982-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a kernel patch pending that renames PERF_MEM_LVLNUM_EXTN_MEM to
PERF_MEM_LVLNUM_CXL, tooling this time is ahead of the kernel :-)
This thus partially addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/lkml/Y1k53KMdzypmU0WS@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "random rhlist add/delete operations" actually wasn't very random, as all
cases tested the same bit. Since the later parts of this loop depend on the
first case execute this unconditionally, and then test on different bits for the
remaining tests. While at it only request as much random bits as are actually
used.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Hans de Goede [Tue, 25 Oct 2022 12:12:23 +0000 (14:12 +0200)]
ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[]
Some x86/ACPI laptops with MIPI cameras have a LATT2021 ACPI device
in the _DEP dependency list of the ACPI devices for the camera-sensors
(which have flags.honor_deps set).
The _DDN for the LATT2021 device is "Lattice FW Update Client Driver",
suggesting that this is used for firmware updates of something. There
is no Linux driver for this and if Linux gets support for updates it
will likely be in userspace through fwupd.
For now add the LATT2021 HID to acpi_ignore_dep_ids[] so that
acpi_dev_ready_for_enumeration() will return true once the other _DEP
dependencies are met.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tamim Khan [Fri, 14 Oct 2022 05:19:31 +0000 (01:19 -0400)]
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
Like the Asus Vivobook K3402ZA/K3502ZA/S5402ZA Asus Vivobook S5602ZA
has an ACPI DSDT table the describes IRQ 1 as ActiveLow while the kernel
overrides it to Edge_High. This prevents the keyboard on this laptop
from working. To fix this add this laptop to the skip_override_table so
that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216579 Tested-by: Dzmitry <wrkedm@gmail.com> Signed-off-by: Tamim Khan <tamim@fusetak.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Sudeep Holla [Tue, 25 Oct 2022 12:34:32 +0000 (13:34 +0100)]
PM: domains: Fix handling of unavailable/disabled idle states
Platforms can provide the information about the availability of each
idle states via status flag. Platforms may have to disable one or more
idle states for various reasons like broken firmware or other unmet
dependencies.
Fix handling of such unavailable/disabled idle states by ignoring them
while parsing the states.
Fixes: afac8c6ad047 ("PM / domains: Fix up domain-idle-states OF parsing") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Brian Norris [Mon, 24 Oct 2022 18:02:59 +0000 (11:02 -0700)]
mmc: sdhci_am654: 'select', not 'depends' REGMAP_MMIO
REGMAP_MMIO is not user-configurable, so we can only satisfy this
dependency by enabling some other Kconfig symbol that properly 'select's
it. Use select like everybody else.
Noticed when trying to enable this driver for compile testing.
Jisheng Zhang [Sat, 8 Oct 2022 14:54:37 +0000 (22:54 +0800)]
riscv: jump_label: mark arguments as const to satisfy asm constraints
Samuel reported that the static branch usage in cpu_relax() breaks
building with CONFIG_CC_OPTIMIZE_FOR_SIZE:
In file included from <command-line>:
./arch/riscv/include/asm/jump_label.h: In function 'cpu_relax':
././include/linux/compiler_types.h:285:33: warning: 'asm' operand 0
probably does not match constraints
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro
'asm_volatile_goto'
41 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
././include/linux/compiler_types.h:285:33: error: impossible constraint
in 'asm'
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro
'asm_volatile_goto'
41 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:249:
arch/riscv/kernel/vdso/vgettimeofday.o] Error 1
make: *** [arch/riscv/Makefile:128: vdso_prepare] Error 2
Maybe "-Os" prevents GCC from detecting that the key/branch arguments
can be treated as constants and used as immediate operands. Inspired
by x86's commit b32fb03738f7("x86/jump_label: Mark arguments as const to
satisfy asm constraints"), and as pointed out by Steven: "The "i"
constraint needs to be a constant.", let's do similar modifications to
riscv.
Tested by CC_OPTIMIZE_FOR_SIZE + gcc and CC_OPTIMIZE_FOR_SIZE + clang.
Caleb Connolly [Mon, 24 Oct 2022 23:48:50 +0000 (00:48 +0100)]
net: ipa: don't configure IDLE_INDICATION on v3.1
IPA v3.1 doesn't support the IDLE_INDICATION_CFG register, this was
causing a harmless splat in ipa_idle_indication_cfg(), add a version
check to prevent trying to fetch this register on v3.1
Fixes: ddb9d222891d ("net: ipa: introduce ipa_reg()") Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Tested-by: Jami Kettunen <jami.kettunen@somainline.org> Link: https://lore.kernel.org/r/20221024234850.4049778-1-caleb.connolly@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Caleb Connolly [Mon, 24 Oct 2022 21:03:32 +0000 (22:03 +0100)]
net: ipa: fix v3.1 resource limit masks
The resource group limits for IPA v3.1 mistakenly used 6 bit wide mask
values, when the hardware actually uses 8. Out of range values were
silently ignored before, so the IPA worked as expected. However the
new generalised register definitions introduce stricter checking here,
they now cause some splats and result in the value 0 being written
instead. Fix the limit bitmask widths so that the correct values can be
written.
Fixes: d53583c6da59 ("net: ipa: define resource group/type IPA register fields") Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Tested-by: Jami Kettunen <jami.kettunen@somainline.org> Link: https://lore.kernel.org/r/20221024210336.4014983-2-caleb.connolly@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Caleb Connolly [Mon, 24 Oct 2022 21:03:31 +0000 (22:03 +0100)]
net: ipa: fix v3.5.1 resource limit max values
Some resource limits on IPA v3.5.1 have their max values set to
255, this causes a few splats in ipa_reg_encode and prevents the
IPA from booting properly. The limits are all 6 bits wide so
adjust the max values to 63.
Yang Yingliang [Mon, 24 Oct 2022 13:13:38 +0000 (21:13 +0800)]
net: ksz884x: fix missing pci_disable_device() on error in pcidev_init()
pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release()
while unbinding device.
Slawomir Laba [Mon, 24 Oct 2022 10:05:26 +0000 (03:05 -0700)]
i40e: Fix flow-type by setting GL_HASH_INSET registers
Fix setting bits for specific flow_type for GLQF_HASH_INSET register.
In previous version all of the bits were set only in hena register, while
in inset only one bit was set. In order for this working correctly on all
types of cards these bits needs to be set correctly for both hena and inset
registers.
Fixes: 2d4d6b475ffb ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
i40e: Fix VF hang when reset is triggered on another VF
When a reset was triggered on one VF with i40e_reset_vf
global PF state __I40E_VF_DISABLE was set on a PF until
the reset finished. If immediately after triggering reset
on one VF there is a request to reset on another
it will cause a hang on VF side because VF will be notified
of incoming reset but the reset will never happen because
of this global state, we will get such error message:
[ +4.890195] iavf 0000:86:02.1: Never saw reset
and VF will hang waiting for the reset to be triggered.
Fix this by introducing new VF state I40E_VF_STATE_RESETTING
that will be set on a VF if it is currently resetting instead of
the global __I40E_VF_DISABLE PF state.
Fixes: 445c07b3903e ("i40e: add locking around VF reset") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
the driver would fail to setup this setting on X722
device since it was using the mask on the register
dedicated for X710 devices.
Apply a different mask on the register when setting the
RSS hash for the X722 device.
When displaying the flow types enabled via ethtool:
ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6
the driver would print wrong values for X722 device.
Fix this issue by testing masks for X722 device in
i40e_get_rss_hash_opts function.
Fixes: 2d4d6b475ffb ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 24 Oct 2022 02:01:24 +0000 (19:01 -0700)]
ipv6: ensure sane device mtu in tunnels
Another syzbot report [1] with no reproducer hints
at a bug in ip6_gre tunnel (dev:ip6gretap0)
Since ipv6 mcast code makes sure to read dev->mtu once
and applies a sanity check on it (see commit 62f2c3237665
"ipv6: mcast: better catch silly mtu values"), a remaining
possibility is that a layer is able to set dev->mtu to
an underflowed value (high order bit set).
This could happen indeed in ip6gre_tnl_link_config_route(),
ip6_tnl_link_config() and ipip6_tunnel_bind_dev()
Make sure to sanitize mtu value in a local variable before
it is written once on dev->mtu, as lockless readers could
catch wrong temporary value.
If "interp_elf_ex" fails to allocate memory in load_elf_binary(),
the program will take the "out_free_ph" error handing path,
resulting in "interpreter" file resource is not released.
Fix it by adding an error handing path "out_free_file", which will
release the file resource when "interp_elf_ex" failed to allocate
memory.
Fixes: 1718a4a63ae8 ("fs/binfmt_elf.c: allocate less for static executable") Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221024154421.982230-1-lizetao1@huawei.com
Bernd Edlinger [Mon, 7 Jun 2021 13:54:27 +0000 (15:54 +0200)]
exec: Copy oldsighand->action under spin-lock
unshare_sighand should only access oldsighand->action
while holding oldsighand->siglock, to make sure that
newsighand->action is in a consistent state.
Kees Cook [Thu, 6 Oct 2022 23:00:17 +0000 (16:00 -0700)]
overflow: Refactor test skips for Clang-specific issues
Convert test exclusion into test skipping. This brings the logic for
why a test is being skipped into the test itself, instead of having to
spread ifdefs around the code. This will make cleanup easier as minimum
tests get raised. Drop __maybe_unused so missed tests will be noticed
again and clean up whitespace.
Clang 11 and earlier generate unwanted libcalls for signed output,
unsigned input.
Disable these tests for now, but should these become used in the kernel
we might consider that as justification for dropping clang-11 support.
Keep the clang-11 build alive a little bit longer.
Avoid -Wunused-function warnings via __maybe_unused. To test W=1:
$ make LLVM=1 -j128 defconfig
$ ./scripts/config -e KUNIT -e KUNIT_ALL
$ make LLVM=1 -j128 olddefconfig lib/overflow_kunit.o W=1
Fix the kern-doc markings for several of the overflow helpers and move
their location into the core kernel API documentation, where it belongs
(it's not driver-specific).
projects / kernel.git / log