Karsten Graul [Wed, 30 Jan 2019 17:51:02 +0000 (18:51 +0100)]
net/smc: prevent races between smc_lgr_terminate() and smc_conn_free()
To prevent races between smc_lgr_terminate() and smc_conn_free() add an
extra check of the lgr field before accessing it, and cancel a delayed
free_work when a new smc connection is created.
This fixes the problem that free_work cleared the lgr variable but
smc_lgr_terminate() or smc_conn_free() still access it in parallel.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hans Wippel [Wed, 30 Jan 2019 17:51:01 +0000 (18:51 +0100)]
net/smc: allow 16 byte pnetids in netlink policy
Currently, users can only send pnetids with a maximum length of 15 bytes
over the SMC netlink interface although the maximum pnetid length is 16
bytes. This patch changes the SMC netlink policy to accept 16 byte
pnetids.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Wed, 30 Jan 2019 17:51:00 +0000 (18:51 +0100)]
net/smc: fix another sizeof to int comparison
Comparing an int to a size, which is unsigned, causes the int to become
unsigned, giving the wrong result. kernel_sendmsg can return a negative
error code.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In sctp_sendmesg(), when walking the list of endpoint associations, the
association can be dropped from the list, making the list corrupt.
Properly handle this by using list_for_each_entry_safe()
Fixes: 9e64cff497b3 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg") Reported-by: Secunia Research <vuln@secunia.com> Tested-by: Secunia Research <vuln@secunia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 1 Feb 2019 18:14:12 +0000 (10:14 -0800)]
Merge tag 'mac80211-for-davem-2019-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more fixes:
* sometimes, not enough tailroom was allocated for
software-encrypted management frames in mac80211
* cfg80211 regulatory restore got an additional condition,
needs to rerun the checks after that condition changes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 1 Feb 2019 08:28:16 +0000 (11:28 +0300)]
skge: potential memory corruption in skge_get_regs()
The "p" buffer is 0x4000 bytes long. B3_RI_WTO_R1 is 0x190. The value
of "regs->len" is in the 1-0x4000 range. The bug here is that
"regs->len - B3_RI_WTO_R1" can be a negative value which would lead to
memory corruption and an abrupt crash.
Fixes: 83c45daa94bd ("[PATCH] skge: expand ethtool debug register dump") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 1 Feb 2019 10:09:54 +0000 (11:09 +0100)]
cfg80211: call disconnect_wk when AP stops
Since we now prevent regulatory restore during STA disconnect
if concurrent AP interfaces are active, we need to reschedule
this check when the AP state changes. This fixes never doing
a restore when an AP is the last interface to stop. Or to put
it another way: we need to re-check after anything we check
here changes.
Cc: stable@vger.kernel.org Fixes: 52a8d5e0fe4b ("cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Tue, 29 Jan 2019 10:10:57 +0000 (11:10 +0100)]
mac80211: ensure that mgmt tx skbs have tailroom for encryption
Some drivers use IEEE80211_KEY_FLAG_SW_MGMT_TX to indicate that management
frames need to be software encrypted. Since normal data packets are still
encrypted by the hardware, crypto_tx_tailroom_needed_cnt gets decremented
after key upload to hw. This can lead to passing skbs to ccmp_encrypt_skb,
which don't have the necessary tailroom for software encryption.
Change the code to add tailroom for encrypted management packets, even if
crypto_tx_tailroom_needed_cnt is 0.
Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Michael Chan [Thu, 31 Jan 2019 19:31:48 +0000 (14:31 -0500)]
bnxt_en: Disable interrupts when allocating CP rings or NQs.
When calling firmware to allocate a CP ring or NQ, an interrupt associated
with that ring may be generated immediately before the doorbell is even
setup after the firmware call returns. When servicing the interrupt, the
driver may crash when trying to access the doorbell.
Fix it by disabling interrupt on that vector until the doorbell is
set up.
Fixes: 6be0fb4c6202 ("bnxt_en: Re-structure doorbells.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 31 Jan 2019 17:47:56 +0000 (09:47 -0800)]
Merge branch 'ieee802154-for-davem-2019-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2019-01-31
An update from ieee802154 for your *net* tree.
I waited a while to see if anything else comes up, but it seems this time
we only have one fixup patch for the -rc rounds.
Colin fixed some indentation in the mcr20a drivers. That's about it.
If there are any problems with taking these two before the final 5.0 let
me know.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bart Van Assche [Wed, 30 Jan 2019 18:42:30 +0000 (10:42 -0800)]
lib/test_rhashtable: Make test_insert_dup() allocate its hash table dynamically
The test_insert_dup() function from lib/test_rhashtable.c passes a
pointer to a stack object to rhltable_init(). Allocate the hash table
dynamically to avoid that the following is reported with object
debugging enabled:
Cc: Thomas Graf <tgraf@suug.ch> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Wen [Thu, 31 Jan 2019 07:18:56 +0000 (15:18 +0800)]
l2tp: copy 4 more bytes to linear part if necessary
The size of L2TPv2 header with all optional fields is 14 bytes.
l2tp_udp_recv_core only moves 10 bytes to the linear part of a
skb. This may lead to l2tp_recv_common read data outside of a skb.
This patch make sure that there is at least 14 bytes in the linear
part of a skb to meet the maximum need of l2tp_udp_recv_core and
l2tp_recv_common. The minimum size of both PPP HDLC-like frame and
Ethernet frame is larger than 14 bytes, so we are safe to do so.
Also remove L2TP_HDR_SIZE_NOSEQ, it is unused now.
Fixes: b2079113577e ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 30 Jan 2019 14:54:21 +0000 (15:54 +0100)]
net: stmmac: Disable EEE mode earlier in XMIT callback
In stmmac xmit callback we use a different flow for TSO packets but TSO
xmit callback is not disabling the EEE mode.
Fix this by disabling earlier the EEE mode, i.e. before calling the TSO
xmit callback.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 30 Jan 2019 14:54:20 +0000 (15:54 +0100)]
net: stmmac: Send TSO packets always from Queue 0
The number of TSO enabled channels in HW can be different than the
number of total channels. There is no way to determined, at runtime, the
number of TSO capable channels and its safe to assume that if TSO is
enabled then at least channel 0 will be TSO capable.
Lets always send TSO packets from Queue 0.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 30 Jan 2019 14:54:19 +0000 (15:54 +0100)]
net: stmmac: Fallback to Platform Data clock in Watchdog conversion
If we don't have DT then stmmac_clk will not be available. Let's add a
new Platform Data field so that we can specify the refclk by this mean.
This way we can still use the coalesce command in PCI based setups.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 30 Jan 2019 11:49:48 +0000 (12:49 +0100)]
ipvlan, l3mdev: fix broken l3s mode wrt local routes
While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin,
I ran into the issue that while l3 mode is working fine, l3s mode
does not have any connectivity to kube-apiserver and hence all pods
end up in Error state as well. The ipvlan master device sits on
top of a bond device and hostns traffic to kube-apiserver (also running
in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573
where the latter is the address of the bond0. While in l3 mode, a
curl to https://10.152.183.1:443 or to https://139.178.29.207:37573
works fine from hostns, neither of them do in case of l3s. In the
latter only a curl to https://127.0.0.1:37573 appeared to work where
for local addresses of bond0 I saw kernel suddenly starting to emit
ARP requests to query HW address of bond0 which remained unanswered
and neighbor entries in INCOMPLETE state. These ARP requests only
happen while in l3s.
Debugging this further, I found the issue is that l3s mode is piggy-
backing on l3 master device, and in this case local routes are using
l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit 8319d96b8076 ("net: ipv4: dst for local input routes should use l3mdev
if relevant") and 97e09483faff ("net: l3mdev: Allow the l3mdev to be
a loopback"). I found that reverting them back into using the
net->loopback_dev fixed ipvlan l3s connectivity and got everything
working for the CNI.
Now judging from 38d1ddf0bfcb ("ipvlan: Introduce l3s mode") and the
l3mdev paper in [0] the only sole reason why ipvlan l3s is relying
on l3 master device is to get the l3mdev_ip_rcv() receive hook for
setting the dst entry of the input route without adding its own
ipvlan specific hacks into the receive path, however, any l3 domain
semantics beyond just that are breaking l3s operation. Note that
ipvlan also has the ability to dynamically switch its internal
operation from l3 to l3s for all ports via ipvlan_set_port_mode()
at runtime. In any case, l3 vs l3s soley distinguishes itself by
'de-confusing' netfilter through switching skb->dev to ipvlan slave
device late in NF_INET_LOCAL_IN before handing the skb to L4.
Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which,
if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook
without any additional l3mdev semantics on top. This should also have
minimal impact since dev->priv_flags is already hot in cache. With
this set, l3s mode is working fine and I also get things like
masquerading pod traffic on the ipvlan master properly working.
Fixes: 8319d96b8076 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Fixes: 97e09483faff ("net: l3mdev: Allow the l3mdev to be a loopback") Fixes: 38d1ddf0bfcb ("ipvlan: Introduce l3s mode") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Mahesh Bandewar <maheshb@google.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Florian Westphal <fw@strlen.de> Cc: Martynas Pumputis <m@lambda.lt> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Wen [Wed, 30 Jan 2019 06:55:14 +0000 (14:55 +0800)]
l2tp: fix reading optional fields of L2TPv3
Use pskb_may_pull() to make sure the optional fields are in skb linear
parts, so we can safely read them later.
It's easy to reproduce the issue with a net driver that supports paged
skb data. Just create a L2TPv3 over IP tunnel and then generates some
network traffic.
Once reproduced, rx err in /sys/kernel/debug/l2tp/tunnels will increase.
Changes in v4:
1. s/l2tp_v3_pull_opt/l2tp_v3_ensure_opt_in_linear/
2. s/tunnel->version != L2TP_HDR_VER_2/tunnel->version == L2TP_HDR_VER_3/
3. Add 'Fixes' in commit messages.
Changes in v3:
1. To keep consistency, move the code out of l2tp_recv_common.
2. Use "net" instead of "net-next", since this is a bug fix.
Changes in v2:
1. Only fix L2TPv3 to make code simple.
To fix both L2TPv3 and L2TPv2, we'd better refactor l2tp_recv_common.
It's complicated to do so.
2. Reloading pointers after pskb_may_pull
Fixes: 9b4d7c520ad6 ("l2tp: Add L2TPv3 protocol support") Fixes: fb6422603825 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Fixes: d1aaf87067e6 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
George Amanakis [Wed, 30 Jan 2019 03:50:13 +0000 (22:50 -0500)]
tun: move the call to tun_set_real_num_queues
Call tun_set_real_num_queues() after the increment of tun->numqueues
since the former depends on it. Otherwise, the number of queues is not
correctly accounted for, which results to warnings similar to:
"vnet0 selects TX queue 11, but real number of TX queues is 11".
Fixes: d41ac5a3de83 ("tun: publish tfile after it's fully initialized") Reported-and-tested-by: George Amanakis <gamanakis@gmail.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yohei Kanemaru [Tue, 29 Jan 2019 06:52:34 +0000 (15:52 +0900)]
ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation
skb->cb may contain data from previous layers (in an observed case
IPv4 with L3 Master Device). In the observed scenario, the data in
IPCB(skb)->frags was misinterpreted as IP6CB(skb)->frag_max_size,
eventually caused an unexpected IPv6 fragmentation in ip6_fragment()
through ip6_finish_output().
This patch clears IP6CB(skb), which potentially contains garbage data,
on the SRH ip4ip6 encapsulation.
Fixes: e4944a1cf1aa ("ipv6: sr: add support for ip4ip6 encapsulation") Signed-off-by: Yohei Kanemaru <yohei.kanemaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
virtio_net: Fix problems around XDP tx and napi_tx
While I'm looking into how to account standard tx counters on XDP tx
processing, I found several bugs around XDP tx and napi_tx.
Patch1: Fix oops on error path. Patch2 depends on this.
Patch2: Fix memory corruption on freeing xdp_frames with napi_tx enabled.
Patch3: Minor fix patch5 depends on.
Patch4: Fix memory corruption on processing xdp_frames when XDP is disabled.
Also patch5 depends on this.
Patch5: Fix memory corruption on processing xdp_frames while XDP is being
disabled.
Patch6: Minor fix patch7 depends on.
Patch7: Fix memory corruption on freeing sk_buff or xdp_frames when a normal
queue is reused for XDP and vise versa.
v2:
- patch5: Make rcu_assign_pointer/synchronize_net conditional instead of
_virtnet_set_queues.
- patch7: Use napi_consume_skb() instead of dev_consume_skb_any()
====================
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Tue, 29 Jan 2019 00:45:59 +0000 (09:45 +0900)]
virtio_net: Differentiate sk_buff and xdp_frame on freeing
We do not reset or free up unused buffers when enabling/disabling XDP,
so it can happen that xdp_frames are freed after disabling XDP or
sk_buffs are freed after enabling XDP on xdp tx queues.
Thus we need to handle both forms (xdp_frames and sk_buffs) regardless
of XDP setting.
One way to trigger this problem is to disable XDP when napi_tx is
enabled. In that case, virtnet_xdp_set() calls virtnet_napi_enable()
which kicks NAPI. The NAPI handler will call virtnet_poll_cleantx()
which invokes free_old_xmit_skbs() for queues which have been used by
XDP.
Note that even with this change we need to keep skipping
free_old_xmit_skbs() from NAPI handlers when XDP is enabled, because XDP
tx queues do not aquire queue locks.
- v2: Use napi_consume_skb() instead of dev_consume_skb_any()
Fixes: 48c25b154536 ("virtio-net: do not reset during XDP set") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Tue, 29 Jan 2019 00:45:58 +0000 (09:45 +0900)]
virtio_net: Use xdp_return_frame to free xdp_frames on destroying vqs
put_page() can work as a fallback for freeing xdp_frames, but the
appropriate way is to use xdp_return_frame().
Fixes: 2667e267520b ("virtio_net: convert to use generic xdp_frame and xdp_return_frame API") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Tue, 29 Jan 2019 00:45:57 +0000 (09:45 +0900)]
virtio_net: Don't process redirected XDP frames when XDP is disabled
Commit 23d1ac93ea2c ("virtio_net: fix ndo_xdp_xmit crash towards dev not
ready for XDP") tried to avoid access to unexpected sq while XDP is
disabled, but was not complete.
There was a small window which causes out of bounds sq access in
virtnet_xdp_xmit() while disabling XDP.
An example case of
- curr_queue_pairs = 6 (2 for SKB and 4 for XDP)
- online_cpu_num = xdp_queue_paris = 4
when XDP is enabled:
CPU 0 CPU 1
(Disabling XDP) (Processing redirected XDP frames)
virtnet_xdp_xmit()
virtnet_xdp_set()
_virtnet_set_queues()
set curr_queue_pairs (2)
check if rq->xdp_prog is not NULL
virtnet_xdp_sq(vi)
qp = curr_queue_pairs -
xdp_queue_pairs +
smp_processor_id()
= 2 - 4 + 1 = -1
sq = &vi->sq[qp] // out of bounds access
set xdp_queue_pairs (0)
rq->xdp_prog = NULL
Basically we should not change curr_queue_pairs and xdp_queue_pairs
while someone can read the values. Thus, when disabling XDP, assign NULL
to rq->xdp_prog first, and wait for RCU grace period, then change
xxx_queue_pairs.
Note that we need to keep the current order when enabling XDP though.
- v2: Make rcu_assign_pointer/synchronize_net conditional instead of
_virtnet_set_queues.
Fixes: a7cb0cd8923a ("virtio-net: support XDP_REDIRECT") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Tue, 29 Jan 2019 00:45:56 +0000 (09:45 +0900)]
virtio_net: Fix out of bounds access of sq
When XDP is disabled, curr_queue_pairs + smp_processor_id() can be
larger than max_queue_pairs.
There is no guarantee that we have enough XDP send queues dedicated for
each cpu when XDP is disabled, so do not count drops on sq in that case.
Fixes: da40d73263cd ("virtio_net: Add XDP related stats") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Tue, 29 Jan 2019 00:45:55 +0000 (09:45 +0900)]
virtio_net: Fix not restoring real_num_rx_queues
When _virtnet_set_queues() failed we did not restore real_num_rx_queues.
Fix this by placing the change of real_num_rx_queues after
_virtnet_set_queues().
This order is also in line with virtnet_set_channels().
Fixes: 48c25b154536 ("virtio-net: do not reset during XDP set") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Tue, 29 Jan 2019 00:45:54 +0000 (09:45 +0900)]
virtio_net: Don't call free_old_xmit_skbs for xdp_frames
When napi_tx is enabled, virtnet_poll_cleantx() called
free_old_xmit_skbs() even for xdp send queue.
This is bogus since the queue has xdp_frames, not sk_buffs, thus mangled
device tx bytes counters because skb->len is meaningless value, and even
triggered oops due to general protection fault on freeing them.
Since xdp send queues do not aquire locks, old xdp_frames should be
freed only in virtnet_xdp_xmit(), so just skip free_old_xmit_skbs() for
xdp send queues.
Similarly virtnet_poll_tx() called free_old_xmit_skbs(). This NAPI
handler is called even without calling start_xmit() because cb for tx is
by default enabled. Once the handler is called, it enabled the cb again,
and then the handler would be called again. We don't need this handler
for XDP, so don't enable cb as well as not calling free_old_xmit_skbs().
Also, we need to disable tx NAPI when disabling XDP, so
virtnet_poll_tx() can safely access curr_queue_pairs and
xdp_queue_pairs, which are not atomically updated while disabling XDP.
Fixes: 721a8191dfb7 ("virtio-net: transmit napi") Fixes: 06483a3cbc47 ("virtio-net: clean tx descriptors from rx napi") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Tue, 29 Jan 2019 00:45:53 +0000 (09:45 +0900)]
virtio_net: Don't enable NAPI when interface is down
Commit dda929638228 ("virtio-net: disable NAPI only when enabled during
XDP set") tried to fix inappropriate NAPI enabling/disabling when
!netif_running(), but was not complete.
On error path virtio_net could enable NAPI even when !netif_running().
This can cause enabling NAPI twice on virtnet_open(), which would
trigger BUG_ON() in napi_enable().
Fixes: 48c25b1545369 ("virtio-net: do not reset during XDP set") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
erspan: always reports output key to userspace
Erspan protocol relies on output key to set session id header field.
However TUNNEL_KEY bit is cleared in order to not add key field to
the external GRE header and so the configured o_key is not reported
to userspace.
Fix the issue adding TUNNEL_KEY bit to the o_flags parameter dumping
device info
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Mon, 28 Jan 2019 21:23:49 +0000 (22:23 +0100)]
net: ip6_gre: always reports o_key to userspace
As Erspan_v4, Erspan_v6 protocol relies on o_key to configure
session id header field. However TUNNEL_KEY bit is cleared in
ip6erspan_tunnel_xmit since ERSPAN protocol does not set the key field
of the external GRE header and so the configured o_key is not reported
to userspace. The issue can be triggered with the following reproducer:
$ip link add ip6erspan1 type ip6erspan local 2000::1 remote 2000::2 \
key 1 seq erspan_ver 1
$ip link set ip6erspan1 up
ip -d link sh ip6erspan1
ip6erspan1@NONE: <BROADCAST,MULTICAST> mtu 1422 qdisc noop state DOWN mode DEFAULT
link/ether ba:ff:09:24:c3:0e brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
ip6erspan remote 2000::2 local 2000::1 encaplimit 4 flowlabel 0x00000 ikey 0.0.0.1 iseq oseq
Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in
ip6gre_fill_info
Fixes: 318c892820e0 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Mon, 28 Jan 2019 21:23:48 +0000 (22:23 +0100)]
net: ip_gre: always reports o_key to userspace
Erspan protocol (version 1 and 2) relies on o_key to configure
session id header field. However TUNNEL_KEY bit is cleared in
erspan_xmit since ERSPAN protocol does not set the key field
of the external GRE header and so the configured o_key is not reported
to userspace. The issue can be triggered with the following reproducer:
$ip link add erspan1 type erspan local 192.168.0.1 remote 192.168.0.2 \
key 1 seq erspan_ver 1
$ip link set erspan1 up
$ip -d link sh erspan1
Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in
ipgre_fill_info
Fixes: 47b2af5234e3 ("gre: introduce native tunnel support for ERSPAN") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mathias Thore [Mon, 28 Jan 2019 09:07:47 +0000 (10:07 +0100)]
ucc_geth: Reset BQL queue when stopping device
After a timeout event caused by for example a broadcast storm, when
the MAC and PHY are reset, the BQL TX queue needs to be reset as
well. Otherwise, the device will exhibit severe performance issues
even after the storm has ended.
Co-authored-by: David Gounaris <david.gounaris@infinera.com> Signed-off-by: Mathias Thore <mathias.thore@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Jan 2019 18:19:31 +0000 (10:19 -0800)]
Merge branch 'net-various-compat-ioctl-fixes'
Johannes Berg says:
====================
various compat ioctl fixes
Back a long time ago, I already fixed a few of these by passing
the size of the struct ifreq to do_sock_ioctl(). However, Robert
found more cases, and now it won't be as simple because we'd have
to pass that down all the way to e.g. bond_do_ioctl() which isn't
really feasible.
Therefore, restore the old code.
While looking at why SIOCGIFNAME was broken, I realized that Al
had removed that case - which had been handled in an explicit
separate function - as well, and looking through his work at the
time I saw that bond ioctls were also affected by the erroneous
removal.
I've restored SIOCGIFNAME and bond ioctls by going through the
(now renamed) dev_ifsioc() instead of reintroducing their own
helper functions, which I hope is correct but have only tested
with SIOCGIFNAME.
====================
Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 25 Jan 2019 21:43:20 +0000 (22:43 +0100)]
net: socket: make bond ioctls go through compat_ifreq_ioctl()
Same story as before, these use struct ifreq and thus need
to be read with the shorter version to not cause faults.
Cc: stable@vger.kernel.org Fixes: 3b66de989aa6 ("kill bond_ioctl()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 25 Jan 2019 21:43:19 +0000 (22:43 +0100)]
net: socket: fix SIOCGIFNAME in compat
As reported by Robert O'Callahan in
https://bugzilla.kernel.org/show_bug.cgi?id=202273
reverting the previous changes in this area broke
the SIOCGIFNAME ioctl in compat again (I'd previously
fixed it after his previous report of breakage in
https://bugzilla.kernel.org/show_bug.cgi?id=199469).
This is obviously because I fixed SIOCGIFNAME more or
less by accident.
Fix it explicitly now by making it pass through the
restored compat translation code.
Cc: stable@vger.kernel.org Fixes: 5a762d408817 ("kill dev_ifname32()") Reported-by: Robert O'Callahan <robert@ocallahan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 25 Jan 2019 21:43:18 +0000 (22:43 +0100)]
Revert "kill dev_ifsioc()"
This reverts commit 067c472d4a17 ("kill dev_ifsioc()").
This wasn't really unused as implied by the original commit,
it still handles the copy to/from user differently, and the
commit thus caused issues such as
https://bugzilla.kernel.org/show_bug.cgi?id=199469
and
https://bugzilla.kernel.org/show_bug.cgi?id=202273
However, deviating from a strict revert, rename dev_ifsioc()
to compat_ifreq_ioctl() to be clearer as to its purpose and
add a comment.
Cc: stable@vger.kernel.org Fixes: 067c472d4a17 ("kill dev_ifsioc()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 25 Jan 2019 21:43:17 +0000 (22:43 +0100)]
Revert "socket: fix struct ifreq size in compat ioctl"
This reverts commit 62d20f3e793f ("socket: fix struct ifreq
size in compat ioctl"), it's a bugfix for another commit that
I'll revert next.
This is not a 'perfect' revert, I'm keeping some coding style
intact rather than revert to the state with indentation errors.
Cc: stable@vger.kernel.org Fixes: 62d20f3e793f ("socket: fix struct ifreq size in compat ioctl") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Need to save away the IV across tls async operations, from Dave
Watson.
2) Upon successful packet processing, we should liberate the SKB with
dev_consume_skb{_irq}(). From Yang Wei.
3) Only apply RX hang workaround on effected macb chips, from Harini
Katakam.
4) Dummy netdev need a proper namespace assigned to them, from Josh
Elsasser.
5) Some paths of nft_compat run lockless now, and thus we need to use a
proper refcnt_t. From Florian Westphal.
6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua.
7) netrom does not refcount sockets properly wrt. timers, fix that by
using the sock timer API. From Cong Wang.
8) Fix locking of inexact inserts of xfrm policies, from Florian
Westphal.
9) Missing xfrm hash generation bump, also from Florian.
10) Missing of_node_put() in hns driver, from Yonglong Liu.
11) Fix DN_IFREQ_SIZE, from Johannes Berg.
12) ip6mr notifier is invoked during traversal of wrong table, from Nir
Dotan.
13) TX promisc settings not performed correctly in qed, from Manish
Chopra.
14) Fix OOB access in vhost, from Jason Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
MAINTAINERS: Add entry for XDP (eXpress Data Path)
net: set default network namespace in init_dummy_netdev()
net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles
net: caif: call dev_consume_skb_any when skb xmit done
net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: macb: Apply RXUBR workaround only to versions with errata
net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq
net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq
net: tls: Fix deadlock in free_resources tx
net: tls: Save iv in tls_rec for async crypto requests
vhost: fix OOB in get_rx_bufs()
qed: Fix stack out of bounds bug
qed: Fix system crash in ll2 xmit
qed: Fix VF probe failure while FLR
qed: Fix LACP pdu drops for VFs
qed: Fix bug in tx promiscuous mode settings
net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
netfilter: ipt_CLUSTERIP: fix warning unused variable cn
...
MAINTAINERS: Add entry for XDP (eXpress Data Path)
Add multiple people as maintainers for XDP, sorted alphabetically.
XDP is also tied to driver level support and code, but we cannot add all
drivers to the list. Instead K: and N: match on 'xdp' in hope to catch some
of those changes in drivers.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Josh Elsasser [Sat, 26 Jan 2019 22:38:33 +0000 (14:38 -0800)]
net: set default network namespace in init_dummy_netdev()
Assign a default net namespace to netdevs created by init_dummy_netdev().
Fixes a NULL pointer dereference caused by busy-polling a socket bound to
an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat
if napi_poll() received packets:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000190
IP: napi_busy_loop+0xd6/0x200
Call Trace:
sock_poll+0x5e/0x80
do_sys_poll+0x324/0x5a0
SyS_poll+0x6c/0xf0
do_syscall_64+0x6b/0x1f0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: babbb65acf6d ("net: Commonize busy polling code to focus on napi_id instead of socket") Signed-off-by: Josh Elsasser <jelsasser@appneta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 29 Jan 2019 15:04:40 +0000 (23:04 +0800)]
net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles
The skb should be freed by dev_consume_skb_any() in b44_start_xmit()
when bounce_skb is used. The skb is be replaced by bounce_skb, so the
original skb should be consumed(not drop).
dev_consume_skb_irq() should be called in b44_tx() when skb xmit
done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 29 Jan 2019 15:32:22 +0000 (23:32 +0800)]
net: caif: call dev_consume_skb_any when skb xmit done
The skb shouled be consumed when xmit done, it makes drop profiles
(dropwatch, perf) more friendly.
dev_kfree_skb_irq()/kfree_skb() shouled be replaced by
dev_consume_skb_any(), it makes code cleaner.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Harini Katakam [Tue, 29 Jan 2019 09:50:03 +0000 (15:20 +0530)]
net: macb: Apply RXUBR workaround only to versions with errata
The interrupt handler contains a workaround for RX hang applicable
to Zynq and AT91RM9200 only. Subsequent versions do not need this
workaround. This workaround unnecessarily resets RX whenever RX used
bit read is observed, which can be often under heavy traffic. There
is no other action performed on RX UBR interrupt. Hence introduce a
CAPS mask; enable this interrupt and workaround only on affected
versions.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Watson [Sun, 27 Jan 2019 00:59:03 +0000 (00:59 +0000)]
net: tls: Fix deadlock in free_resources tx
If there are outstanding async tx requests (when crypto returns EINPROGRESS),
there is a potential deadlock: the tx work acquires the lock, while we
cancel_delayed_work_sync() while holding the lock. Drop the lock while waiting
for the work to complete.
Fixes: 4e09428b5ad71 ("Add support for async encryption of records...") Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Watson [Sun, 27 Jan 2019 00:57:38 +0000 (00:57 +0000)]
net: tls: Save iv in tls_rec for async crypto requests
aead_request_set_crypt takes an iv pointer, and we change the iv
soon after setting it. Some async crypto algorithms don't save the iv,
so we need to save it in the tls_rec for async requests.
Found by hardcoding x64 aesni to use async crypto manager (to test the async
codepath), however I don't think this combination can happen in the wild.
Presumably other hardware offloads will need this fix, but there have been
no user reports.
Fixes: 4e09428b5ad71 ("Add support for async encryption of records...") Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Mon, 28 Jan 2019 07:05:05 +0000 (15:05 +0800)]
vhost: fix OOB in get_rx_bufs()
After batched used ring updating was introduced in commit c5c6fa6154ba
("vhost_net: batch used ring update in rx"). We tend to batch heads in
vq->heads for more than one packet. But the quota passed to
get_rx_bufs() was not correctly limited, which can result a OOB write
in vq->heads.
UIO_MAXIOV was still used which is wrong since we could have batched
used in vq->heads, this will cause OOB if the next buffer needs more
than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've
batched 64 (VHOST_NET_BATCH) heads: Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
=============================================================================
BUG kmalloc-8k (Tainted: G B ): Redzone overwritten
-----------------------------------------------------------------------------
Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for
vhost-net. This is done through set the limitation through
vhost_dev_init(), then set_owner can allocate the number of iov in a
per device manner.
This fixes CVE-2018-16880.
Fixes: c5c6fa6154ba ("vhost_net: batch used ring update in rx") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Mon, 28 Jan 2019 18:05:08 +0000 (10:05 -0800)]
qed: Fix stack out of bounds bug
KASAN reported following bug in qed_init_qm_get_idx_from_flags
due to inappropriate casting of "pq_flags". Fix the type of "pq_flags".
[ 196.624707] BUG: KASAN: stack-out-of-bounds in qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed]
[ 196.624712] Read of size 8 at addr ffff809b00bc7360 by task kworker/0:9/1712
[ 196.624714]
[ 196.624720] CPU: 0 PID: 1712 Comm: kworker/0:9 Not tainted 4.18.0-60.el8.aarch64+debug #1
[ 196.624723] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL024 09/26/2018
[ 196.624733] Workqueue: events work_for_cpu_fn
[ 196.624738] Call trace:
[ 196.624742] dump_backtrace+0x0/0x2f8
[ 196.624745] show_stack+0x24/0x30
[ 196.624749] dump_stack+0xe0/0x11c
[ 196.624755] print_address_description+0x68/0x260
[ 196.624759] kasan_report+0x178/0x340
[ 196.624762] __asan_report_load_n_noabort+0x38/0x48
[ 196.624786] qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed]
[ 196.624808] qed_init_qm_info+0xec0/0x2200 [qed]
[ 196.624830] qed_resc_alloc+0x284/0x7e8 [qed]
[ 196.624853] qed_slowpath_start+0x6cc/0x1ae8 [qed]
[ 196.624864] __qede_probe.isra.10+0x1cc/0x12c0 [qede]
[ 196.624874] qede_probe+0x78/0xf0 [qede]
[ 196.624879] local_pci_probe+0xc4/0x180
[ 196.624882] work_for_cpu_fn+0x54/0x98
[ 196.624885] process_one_work+0x758/0x1900
[ 196.624888] worker_thread+0x4e0/0xd18
[ 196.624892] kthread+0x2c8/0x350
[ 196.624897] ret_from_fork+0x10/0x18
[ 196.624899]
[ 196.624902] Allocated by task 2:
[ 196.624906] kasan_kmalloc.part.1+0x40/0x108
[ 196.624909] kasan_kmalloc+0xb4/0xc8
[ 196.624913] kasan_slab_alloc+0x14/0x20
[ 196.624916] kmem_cache_alloc_node+0x1dc/0x480
[ 196.624921] copy_process.isra.1.part.2+0x1d8/0x4a98
[ 196.624924] _do_fork+0x150/0xfa0
[ 196.624926] kernel_thread+0x48/0x58
[ 196.624930] kthreadd+0x3a4/0x5a0
[ 196.624932] ret_from_fork+0x10/0x18
[ 196.624934]
[ 196.624937] Freed by task 0:
[ 196.624938] (stack is not available)
[ 196.624940]
[ 196.624943] The buggy address belongs to the object at ffff809b00bc0000
[ 196.624943] which belongs to the cache thread_stack of size 32768
[ 196.624946] The buggy address is located 29536 bytes inside of
[ 196.624946] 32768-byte region [ffff809b00bc0000, ffff809b00bc8000)
[ 196.624948] The buggy address belongs to the page:
[ 196.624952] page:ffff7fe026c02e00 count:1 mapcount:0 mapping:ffff809b4001c000 index:0x0 compound_mapcount: 0
[ 196.624960] flags: 0xfffff8000008100(slab|head)
[ 196.624967] raw: 0fffff8000008100dead000000000100dead000000000200ffff809b4001c000
[ 196.624970] raw: 0000000000000000000000000008000800000001ffffffff0000000000000000
[ 196.624973] page dumped because: kasan: bad access detected
[ 196.624974]
[ 196.624976] Memory state around the buggy address:
[ 196.624980] ffff809b00bc7200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 196.624983] ffff809b00bc7280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 196.624985] >ffff809b00bc7300: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2
[ 196.624988] ^
[ 196.624990] ffff809b00bc7380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 196.624993] ffff809b00bc7400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 196.624995] ==================================================================
Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Mon, 28 Jan 2019 18:05:07 +0000 (10:05 -0800)]
qed: Fix system crash in ll2 xmit
Cache number of fragments in the skb locally as in case
of linear skb (with zero fragments), tx completion
(or freeing of skb) may happen before driver tries
to get number of frgaments from the skb which could
lead to stale access to an already freed skb.
Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Mon, 28 Jan 2019 18:05:06 +0000 (10:05 -0800)]
qed: Fix VF probe failure while FLR
VFs may hit VF-PF channel timeout while probing, as in some
cases it was observed that VF FLR and VF "acquire" message
transaction (i.e first message from VF to PF in VF's probe flow)
could occur simultaneously which could lead VF to fail sending
"acquire" message to PF as VF is marked disabled from HW perspective
due to FLR, which will result into channel timeout and VF probe failure.
In such cases, try retrying VF "acquire" message so that in later
attempts it could be successful to pass message to PF after the VF
FLR is completed and can be probed successfully.
Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Mon, 28 Jan 2019 18:05:05 +0000 (10:05 -0800)]
qed: Fix LACP pdu drops for VFs
VF is always configured to drop control frames
(with reserved mac addresses) but to work LACP
on the VFs, it would require LACP control frames
to be forwarded or transmitted successfully.
This patch fixes this in such a way that trusted VFs
(marked through ndo_set_vf_trust) would be allowed to
pass the control frames such as LACP pdus.
Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Mon, 28 Jan 2019 18:05:04 +0000 (10:05 -0800)]
qed: Fix bug in tx promiscuous mode settings
When running tx switched traffic between VNICs
created via a bridge(to which VFs are added),
adapter drops the unicast packets in tx flow due to
VNIC's ucast mac being unknown to it. But VF interfaces
being in promiscuous mode should have caused adapter
to accept all the unknown ucast packets. Later, it
was found that driver doesn't really configure tx
promiscuous mode settings to accept all unknown unicast macs.
This patch fixes tx promiscuous mode settings to accept all
unknown/unmatched unicast macs and works out the scenario.
Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following patchset contains Netfilter/IPVS fixes for your net tree:
1) The nftnl mutex is now per-netns, therefore use reference counter
for matches and targets to deal with concurrent updates from netns.
Moreover, place extensions in a pernet list. Patches from Florian Westphal.
2) Bail out with EINVAL in case of negative timeouts via setsockopt()
through ip_vs_set_timeout(), from ZhangXiaoxu.
3) Spurious EINVAL on ebtables 32bit binary with 64bit kernel, also
from Florian.
4) Reset TCP option header parser in case of fingerprint mismatch,
otherwise follow up overlapping fingerprint definitions including
TCP options do not work, from Fernando Fernandez Mancera.
5) Compilation warning in ipt_CLUSTER with CONFIG_PROC_FS unset.
From Anders Roxell.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The underlying assumption that one sparse section belongs into a single
numa node doesn't hold really. Robert Shteynfeld has reported a boot
failure. The boot log was not captured but his memory layout is as
follows:
This means that node0 starts in the middle of a memory section which is
also in node1. memmap_init_zone tries to initialize padding of a
section even when it is outside of the given pfn range because there are
code paths (e.g. memory hotplug) which assume that the full worth of
memory section is always initialized.
In this particular case, though, such a range is already intialized and
most likely already managed by the page allocator. Scribbling over
those pages corrupts the internal state and likely blows up when any of
those pages gets used.
Reported-by: Robert Shteynfeld <robert.shteynfeld@gmail.com> Fixes: 61860acd076b ("mm, memory_hotplug: initialize struct pages for the full memory section") Cc: stable@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we check the tcp options of a packet and it doesn't match the current
fingerprint, the tcp packet option pointer must be restored to its initial
value in order to do the proper tcp options check for the next fingerprint.
Here we can see an example.
Assumming the following fingerprint base with two lines:
Where TCP options are the last field in the OS signature, all of them overlap
except by the last one, ie. 'W6' versus 'W7'.
In case a packet for Linux 4.19 kicks in, the osf finds no matching because the
TCP options pointer is updated after checking for the TCP options in the first
line.
Therefore, reset pointer back to where it should be.
Fixes: 82f337bd3ffb ("netfilter: passive OS fingerprint xtables match") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 21 Jan 2019 20:54:36 +0000 (21:54 +0100)]
netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present
Unlike ip(6)tables ebtables only counts user-defined chains.
The effect is that a 32bit ebtables binary on a 64bit kernel can do
'ebtables -N FOO' only after adding at least one rule, else the request
fails with -EINVAL.
This is a similar fix as done in 447de63b7be2 ("netfilter: ebtables: don't attempt to allocate 0-sized compat array").
Duec to a typo, mv88e6390_serdes_irq_setup() calls itself, rather than
mv88e6390x_serdes_irq_setup(). It then blows the stack, and shortly
after the machine blows up.
Fixes: d05681980810 ("net: dsa: mv88e6xxx: Add support for SERDES on ports 2-8 for 6390X") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 27 Jan 2019 07:26:22 +0000 (09:26 +0200)]
ip6mr: Fix notifiers call on mroute_clean_tables()
When the MC route socket is closed, mroute_clean_tables() is called to
cleanup existing routes. Mistakenly notifiers call was put on the cleanup
of the unresolved MC route entries cache.
In a case where the MC socket closes before an unresolved route expires,
the notifier call leads to a crash, caused by the driver trying to
increment a non initialized refcount_t object [1] and then when handling
is done, to decrement it [2]. This was detected by a test recently added in
commit deb5e22c949d ("selftests: forwarding: Add multicast routing test").
Fix that by putting notifiers call on the resolved entries traversal,
instead of on the unresolved entries traversal.
Fixes: 635ffa8e7a59 ("ip6mr: Support fib notifications") Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Sat, 26 Jan 2019 20:12:19 +0000 (21:12 +0100)]
decnet: fix DN_IFREQ_SIZE
Digging through the ioctls with Al because of the previous
patches, we found that on 64-bit decnet's dn_dev_ioctl()
is wrong, because struct ifreq::ifr_ifru is actually 24
bytes (not 16 as expected from struct sockaddr) due to the
ifru_map and ifru_settings members.
Clearly, decnet expects the ioctl to be called with a struct
like
struct ifreq_dn {
char ifr_name[IFNAMSIZ];
struct sockaddr_dn ifr_addr;
};
since it does
struct ifreq *ifr = ...;
struct sockaddr_dn *sdn = (struct sockaddr_dn *)&ifr->ifr_addr;
This means that DN_IFREQ_SIZE is too big for what it wants on
64-bit, as it is
sizeof(struct ifreq) - sizeof(struct sockaddr) +
sizeof(struct sockaddr_dn)
This assumes that sizeof(struct sockaddr) is the size of ifr_ifru
but that isn't true.
Fix this to use offsetof(struct ifreq, ifr_ifru).
This indeed doesn't really matter much - the result is that we
copy in/out 8 bytes more than we should on 64-bit platforms. In
case the "struct ifreq_dn" lands just on the end of a page though
it might lead to faults.
As far as I can tell, it has been like this forever, so it seems
very likely that nobody cares.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When reading phy registers via Clause 45 MDIO protocol, after write
address operation, the driver use another write address operation, so
can not read the right value of any phy registers. This patch fixes it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Sat, 26 Jan 2019 09:18:26 +0000 (17:18 +0800)]
net: hns: Restart autoneg need return failed when autoneg off
The hns driver of earlier devices, when autoneg off, restart autoneg
will return -EINVAL, so make the hns driver for the latest devices
do the same.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Sat, 26 Jan 2019 09:18:25 +0000 (17:18 +0800)]
net: hns: Fix for missing of_node_put() after of_parse_phandle()
In hns enet driver, we use of_parse_handle() to get hold of the
device node related to "ae-handle" but we have missed to put
the node reference using of_node_put() after we are done using
the node. This patch fixes it.
Note: Link: https://lkml.org/lkml/2018/12/22/217 Fixes: 3695007d2771 ("net: hns: enet specifies a reference to dsaf") Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 27 Jan 2019 20:02:00 +0000 (12:02 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the swapped outb() parameters in the KASLR code
- Fix the PKEY handling at fork which missed to preserve the pkey
state for the child. Comes with a test case to validate that.
- Fix the entry stack handling for XEN PV to respect that XEN PV
systems enter the function already on the current thread stack and
not on the trampoline.
- Fix kexec load failure caused by using a stale value when the
kexec_buf structure is reused for subsequent allocations.
- Fix a bogus sizeof() in the memory encryption code
- Enforce PCI dependency for the Intel Low Power Subsystem
- Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
x86/entry/64/compat: Fix stack switching for XEN PV
x86/kexec: Fix a kexec_file_load() failure
x86/mm/mem_encrypt: Fix erroneous sizeof()
x86/selftests/pkeys: Fork() to check for state being preserved
x86/pkeys: Properly copy pkey state at fork()
x86/kaslr: Fix incorrect i8254 outb() parameters
x86/intel/lpss: Make PCI dependency explicit
Linus Torvalds [Sun, 27 Jan 2019 19:57:46 +0000 (11:57 -0800)]
Merge branch 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer fixes from Thomas Gleixner:
"Two commits which were missed to be sent during the merge window.
- The TSC calibration fix turns out to be more urgent as recent
Skylake-X systems seem to have massive trouble with calibration
disturbance. This should go back into stable for that reason and it
the risk of breakage is rather low.
- Drop an unused define"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hpet: Remove unused FSEC_PER_NSEC define
x86/tsc: Make calibration refinement more robust
Linus Torvalds [Sun, 27 Jan 2019 19:55:06 +0000 (11:55 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Glexiner:
"A single regression fix to address the unintended breakage of posix
cpu timers.
This is caused by a new sanity check in the common code, which fails
for posix cpu timers under certain conditions because the posix cpu
timer code never updates the variable which is checked"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Unbreak timer rearming
Linus Torvalds [Sun, 27 Jan 2019 19:25:38 +0000 (11:25 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A small set of fixes for the interrupt subsystem:
- Fix a double increment in the irq descriptor allocator which
resulted in a sanity check only being done for every second
affinity mask
- Add a missing device tree translation in the stm32-exti driver.
Without that the interrupt association is completely wrong.
- Initialize the mutex in the GIC-V3 MBI driver
- Fix the alignment for aliasing devices in the GIC-V3-ITS driver so
multi MSI allocations work correctly
- Ensure that the initial affinity of a interrupt is not empty at
startup time.
- Drop bogus include in the madera irq chip driver
- Fix KernelDoc regression"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size
genirq/irqdesc: Fix double increment in alloc_descs()
genirq: Fix the kerneldoc comment for struct irq_affinity_desc
irqchip/madera: Drop GPIO includes
irqchip/gic-v3-mbi: Fix uninitialized mbi_lock
irqchip/stm32-exti: Add domain translate function
genirq: Make sure the initial affinity is not empty
Bernard Pidoux [Fri, 25 Jan 2019 10:46:40 +0000 (11:46 +0100)]
net/rose: fix NULL ax25_cb kernel panic
When an internally generated frame is handled by rose_xmit(),
rose_route_frame() is called:
if (!rose_route_frame(skb, NULL)) {
dev_kfree_skb(skb);
stats->tx_errors++;
return NETDEV_TX_OK;
}
We have the same code sequence in Net/Rom where an internally generated
frame is handled by nr_xmit() calling nr_route_frame(skb, NULL).
However, in this function NULL argument is tested while it is not in
rose_route_frame().
Then kernel panic occurs later on when calling ax25cmp() with a NULL
ax25_cb argument as reported many times and recently with syzbot.
We need to test if ax25 is NULL before using it.
Testing:
Built kernel with CONFIG_ROSE=y.
Signed-off-by: Bernard Pidoux <f6bvp@free.fr> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+1a2c456a1ea08fa5b5f7@syzkaller.appspotmail.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bernard Pidoux <f6bvp@free.fr> Cc: linux-hams@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Tomonori Sakita [Fri, 25 Jan 2019 02:02:22 +0000 (11:02 +0900)]
net: altera_tse: fix msgdma_tx_completion on non-zero fill_level case
If fill_level was not zero and status was not BUSY,
result of "tx_prod - tx_cons - inuse" might be zero.
Subtracting 1 unconditionally results invalid negative return value
on this case.
Make sure not to return an negative value.
Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Reviewed-by: Dalon L Westergreen <dalon.westergreen@linux.intel.com> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Thu, 24 Jan 2019 22:18:18 +0000 (14:18 -0800)]
netrom: switch to sock timer API
sk_reset_timer() and sk_stop_timer() properly handle
sock refcnt for timer function. Switching to them
could fix a refcounting bug reported by syzbot.
Reported-and-tested-by: syzbot+defa700d16f1bd1b9a05@syzkaller.appspotmail.com Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-hams@vger.kernel.org Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Several patches to fix the fallout from the recent
tree based policy lookup work. From Florian Westphal.
2) Fix VTI for IPCOMP for 'not compressed' IPCOMP packets.
We need an extra IPIP handler to process these packets
correctly. From Su Yanjun.
3) Fix validation of template and selector families for
MODE_ROUTEOPTIMIZATION with ipv4-in-ipv6 packets.
This can lead to a stack-out-of-bounds because
flowi4 struct is treated as flowi6 struct.
Fix from Florian Westphal.
4) Restore the default behaviour of the xfrm set-mark
in the output path. This was changed accidentally
when mark setting was extended to the input path.
From Benedict Wong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 27 Jan 2019 17:21:00 +0000 (09:21 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Quite a few fixes for x86: nested virtualization save/restore, AMD
nested virtualization and virtual APIC, 32-bit fixes, an important fix
to restore operation on older processors, and a bunch of hyper-v
bugfixes. Several are marked stable.
There are also fixes for GCC warnings and for a GCC/objtool interaction"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Mark expected switch fall-throughs
KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
KVM: selftests: check returned evmcs version range
x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
kvm: selftests: Fix region overlap check in kvm_util
kvm: vmx: fix some -Wmissing-prototypes warnings
KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
svm: Fix AVIC incomplete IPI emulation
svm: Add warning message for AVIC IPI invalid target
KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
KVM: x86: Fix PV IPIs for 32-bit KVM host
x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
kvm: x86/vmx: Use kzalloc for cached_vmcs12
KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
KVM: x86: Fix single-step debugging
x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
Linus Torvalds [Sun, 27 Jan 2019 17:11:51 +0000 (09:11 -0800)]
Merge tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix for namespace label support for non-Intel NVDIMMs that implement
the ACPI standard label method.
This has apparently never worked and could wait for v5.1. However it
has enough visibility with hardware vendors [1] and distro bug
trackers [2], and low enough risk that I decided it should go in for
-rc4. The other fixups target the new, for v5.0, nvdimm security
functionality. The larger init path fixup closes a memory leak and a
potential userspace lockup due to missed notifications.
These have all soaked in -next for a week with no reported issues.
Summary:
- Fix support for NVDIMMs that implement the ACPI standard label
methods.
- Fix error handling for security overwrite (memory leak / userspace
hang condition), and another one-line security cleanup"
* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Fix command-supported detection
acpi/nfit: Block function zero DSMs
libnvdimm/security: Require nvdimm_security_setup_events() to succeed
nfit_test: fix security state pull for nvdimm security nfit_test
1) Count ttl-dropped frames properly in mac80211, from Bob Copeland.
2) Integer overflow in ktime handling of bcm can code, from Oliver
Hartkopp.
3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon
Horman.
4) Various hash key fixes in hv_netvsc, from Haiyang Zhang.
5) Use after free in ax25, from Eric Dumazet.
6) Several fixes to the SSN support in SCTP, from Xin Long.
7) Do not process frames after a NAPI reschedule in ibmveth, from
Thomas Falcon.
8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
qed: Revert error handling changes.
cfg80211: extend range deviation for DMG
cfg80211: reg: remove warn_on for a normal case
mac80211: Add attribute aligned(2) to struct 'action'
mac80211: don't initiate TDLS connection if station is not associated to AP
nl80211: fix NLA_POLICY_NESTED() arguments
ibmveth: Do not process frames after calling napi_reschedule
net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
net: usb: asix: ax88772_bind return error when hw_reset fail
MAINTAINERS: Update cavium networking drivers
net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
net/mlx4_core: Add masking for a few queries on HCA caps
sctp: set flow sport from saddr only when it's 0
sctp: set chunk transport correctly when it's a new asoc
sctp: improve the events for sctp stream adding
sctp: improve the events for sctp stream reset
ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
ax25: fix possible use-after-free
sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
hv_netvsc: fix typos in code comments
...
Linus Torvalds [Sat, 26 Jan 2019 23:38:22 +0000 (15:38 -0800)]
Merge tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb3 fixes from Steve French:
"A set of small smb3 fixes, some fixing various crediting issues
discovered during xfstest runs, five for stable"
* tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData
smb3: add credits we receive from oplock/break PDUs
CIFS: Fix mounts if the client is low on credits
CIFS: Do not assume one credit for async responses
CIFS: Fix credit calculations in compound mid callback
CIFS: Fix credit calculation for encrypted reads with errors
CIFS: Fix credits calculations for reads with errors
CIFS: Do not reconnect TCP session in add_credits()
smb3: Cleanup license mess
CIFS: Fix possible hang during async MTU reads and writes
cifs: fix memory leak of an allocated cifs_ntsd structure
Linus Torvalds [Sat, 26 Jan 2019 23:03:43 +0000 (15:03 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes, all of which appear to have user visible consequences.
The DMA one is a regression fix from the merge window and of the
others, four are driver specific and one specific to the target code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: Use explicit access size in ufshcd_dump_regs
scsi: tcmu: fix use after free
scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
scsi: communicate max segment size to the DMA mapping code
Linus Torvalds [Sat, 26 Jan 2019 20:42:41 +0000 (12:42 -0800)]
Merge tag 'for-linus-20190125' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes for this release. This contains:
- Silence sparse rightfully complaining about non-static wbt
functions (Bart)
- Fixes for the zoned comments/ioctl documentation (Damien)
- direct-io fix that's been lingering for a while (Ernesto)
- cgroup writeback fix (Tejun)
- Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)
- Block recursion tracking fix (Ming)
- Fix debugfs command flag naming for a few flags (Jianchao)"
* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
block: Fix comment typo
uapi: fix ioctl documentation
blk-wbt: Declare local functions static
blk-mq: fix the cmd_flag_name array
nvme-multipath: drop optimization for static ANA group IDs
nvmet-rdma: fix null dereference under heavy load
nvme-rdma: rework queue maps handling
nvme-tcp: fix timeout handler
nvme-rdma: fix timeout handler
writeback: synchronize sync(2) against cgroup writeback membership switches
block: cover another queue enter recursion via BIO_QUEUE_ENTERED
direct-io: allow direct writes to empty inodes
Linus Torvalds [Fri, 25 Jan 2019 23:07:03 +0000 (13:07 -1000)]
Merge tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sdhci-acpi: Fixup build dependency for PCI
- sdhci-omap: Resolve Kconfig warnings on keystone
- sdhci-iproc: Propagate errors from DT parsing
- meson-gx: Fixup IRQ handling in release callback
- meson-gx: Use signal re-sampling to fixup tuning
- dw_mmc-bluefield: Fix the license information
* tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: dw_mmc-bluefield: : Fix the license information
mmc: meson-gx: enable signal re-sampling together with tuning
mmc: sdhci-iproc: handle mmc_of_parse() errors during probe
mmc: meson-gx: Free irq in release() callback
mmc: host: Fix Kconfig warnings on keystone_defconfig
mmc: sdhci-acpi: Make PCI dependency explicit
projects / kernel.git / log