MAINTAINERS: CAN network layer: add missing header file can-ml.h
This patch add the can-ml.h to the list of maintained files of the CAN network
layer.
Fixes: d8c3433839b5 ("can: introduce CAN midlayer private and allocate it automatically") Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20210111141930.693847-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Lukas Bulwahn [Fri, 8 Jan 2021 07:39:32 +0000 (08:39 +0100)]
MAINTAINERS: adjust entry to tcan4x5x file split
Commit ffbc91b9821b ("can: tcan4x5x: rename tcan4x5x.c -> tcan4x5x-core.c") and
commit 776153cbf82a ("can: tcan4x5x: move regmap code into seperate file")
split the file tcan4x5x.c into two files, but missed to adjust the TI TCAN4X5X
DEVICE DRIVER section in MAINTAINERS.
Alex Elder [Tue, 12 Jan 2021 19:21:34 +0000 (13:21 -0600)]
net: ipa: add config dependency on QCOM_SMEM
The IPA driver depends on some SMEM functionality (qcom_smem_init(),
qcom_smem_alloc(), and qcom_smem_virt_to_phys()), but this is not
reflected in the configuration dependencies. Add a dependency on
QCOM_SMEM to avoid attempts to build the IPA driver without SMEM.
This avoids a link error for certain configurations.
Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 3ce3d6ab0dc8f ("net: ipa: support COMPILE_TEST") Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210112192134.493-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King [Sun, 10 Jan 2021 10:59:38 +0000 (10:59 +0000)]
net: sfp: add debugfs support
Add debugfs support to SFP so that the internal state of the SFP state
machines and hardware signal state can be viewed from userspace, rather
than having to compile a debug kernel to view state transitions in the
kernel log. The 'state' output looks like:
Long Li [Sat, 9 Jan 2021 00:53:43 +0000 (16:53 -0800)]
hv_netvsc: Process NETDEV_GOING_DOWN on VF hot remove
On VF hot remove, NETDEV_GOING_DOWN is sent to notify the VF is about to
go down. At this time, the VF is still sending/receiving traffic and we
request the VSP to switch datapath.
On completion, the datapath is switched to synthetic and we can proceed
with VF hot remove.
Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Long Li [Sat, 9 Jan 2021 00:53:42 +0000 (16:53 -0800)]
hv_netvsc: Wait for completion on request SWITCH_DATA_PATH
The completion indicates if NVSP_MSG4_TYPE_SWITCH_DATA_PATH has been
processed by the VSP. The traffic is steered to VF or synthetic after we
receive this completion.
Signed-off-by: Long Li <longli@microsoft.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Tue, 12 Jan 2021 08:31:20 +0000 (09:31 +0100)]
r8169: improve DASH support
Instead of doing the full DASH check each time r8168_check_dash() is
called, let's do it once in probe and store DASH capabilities in a
new rtl8169_private member.
Heiner Kallweit [Tue, 12 Jan 2021 08:28:41 +0000 (09:28 +0100)]
r8169: align rtl_wol_suspend_quirk with vendor driver and rename it
At least from chip version 25 the vendor driver sets these rx flags
for all chip versions if WOL is enabled. Therefore I wouldn't consider
it a quirk, so let's rename the function.
Marek Vasut [Mon, 11 Jan 2021 12:50:46 +0000 (13:50 +0100)]
net: ks8851: Select PHYLIB and MICREL_PHY in Kconfig
The PHYLIB must be selected to provide mdiobus_*() functions, and the
MICREL_PHY is necessary too, as that is the only possible PHY attached
to the KS8851 (it is the internal PHY).
Fixes: 1e6f0cdb3aad ("net: ks8851: Register MDIO bus and the internal PHY") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210111125046.36326-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Chulski [Sun, 10 Jan 2021 14:30:59 +0000 (16:30 +0200)]
net: mvpp2: prs: improve ipv4 parse flow
Patch didn't fix any issue, just improve parse flow
and align ipv4 parse flow with ipv6 parse flow.
Currently ipv4 kenguru parser first check IP protocol(TCP/UDP)
and then destination IP address.
Patch introduce reverse ipv4 parse, first destination IP address parsed
and only then IP protocol.
This would allow extend capability for packet L4 parsing and align ipv4
parsing flow with ipv6.
Danilo Carvalho [Fri, 8 Jan 2021 22:21:04 +0000 (22:21 +0000)]
Fix whitespace in uapi/linux/tcp.h.
List of things fixed:
- Two of the socket options were idented with spaces instead of tabs.
- Trailing whitespace in some lines.
- Improper spacing around parenthesis caught by checkpatch.pl.
- Mix of space and tabs in tcp_word_hdr union.
bareudp_dellink() only needs the device list to hand it to
unregister_netdevice_queue(). We can pass NULL in, and
unregister_netdevice_queue() will do the unregistering.
There is no chance for batching on the error path, anyway.
Heiner Kallweit [Sun, 10 Jan 2021 19:50:08 +0000 (20:50 +0100)]
r8169: improve handling D3 PLL power-down
Realtek provided a description of bits 6 and 7 in register PMCH.
They configure whether the chip powers down certain PLL in D3hot and
D3cold respectively. They do not actually power down the PLL.
Reflect this in the code and configure D3 PLL powerdown based on
whether WOL is enabled.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's no known reason why PLL powerdown on D3 shouldn't be enabled
on chip versions 34, 35, 36, and 42. At least the vendor driver doesn't
exclude any of these chip versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King [Sun, 10 Jan 2021 10:58:32 +0000 (10:58 +0000)]
net: sfp: cope with SFPs that set both LOS normal and LOS inverted
The SFP MSA defines two option bits in byte 65 to indicate how the
Rx_LOS signal on SFP pin 8 behaves:
bit 2 - Loss of Signal implemented, signal inverted from standard
definition in SFP MSA (often called "Signal Detect").
bit 1 - Loss of Signal implemented, signal as defined in SFP MSA
(often called "Rx_LOS").
Clearly, setting both bits results in a meaningless situation: it would
mean that LOS is implemented in both the normal sense (1 = signal loss)
and inverted sense (0 = signal loss).
Unfortunately, there are modules out there which set both bits, which
will be initially interpret as "inverted" sense, and then, if the LOS
signal changes state, we will toggle between LINK_UP and WAIT_LOS
states.
Change our LOS handling to give well defined behaviour: only interpret
these bits as meaningful if exactly one is set, otherwise treat it as
if LOS is not implemented.
Vladimir Oltean [Sat, 9 Jan 2021 20:34:15 +0000 (22:34 +0200)]
net: dsa: felix: the switch does not support DMA
The code that sets the DMA mask to 64 bits is bogus, it is taken from
the enetc driver together with the rest of the PCI probing boilerplate.
Since this patch is touching the error path to delete err_dma, let's
also change the err_alloc_felix label which was incorrect. The kzalloc
failure does not need a kfree, but it doesn't hurt either, since kfree
works with NULL pointers.
====================
Get rid of the switchdev transactional model
Changes in v4:
- Fixed build error in dsa_loop and build warning in hellcreek driver.
- Scheduling the mlxsw SPAN work item regardless of the VLAN add return
code, as per Ido's and Petr's request.
Changes in v3:
- Resolved a build warning in mv88e6xxx and tested that it actually
works properly, which resulted in an extra patch (02/11).
- Addressed Ido's minor feedback in commit 10/11 relating to a comment.
Changes in v2:
- Got rid of the vid_begin -> vid_end range too from the switchdev API.
- Actually propagating errors from DSA MDB and VLAN notifiers.
This series comes after the late realization that the prepare/commit
separation imposed by switchdev does not help literally anybody:
https://patchwork.kernel.org/project/netdevbpf/patch/20201212203901.351331-1-vladimir.oltean@nxp.com/
We should kill it before it inflicts even more damage to the error
handling logic in drivers.
Also remove the unused VLAN ranges feature from the switchdev VLAN
objects, which simplifies all drivers by quite a bit.
====================
Vladimir Oltean [Sat, 9 Jan 2021 00:01:56 +0000 (02:01 +0200)]
net: switchdev: delete the transaction object
Now that all users of struct switchdev_trans have been modified to do
without it, we can remove this structure and the two helpers to determine
the phase.
Vladimir Oltean [Sat, 9 Jan 2021 00:01:55 +0000 (02:01 +0200)]
mlxsw: spectrum_switchdev: remove transactional logic for VLAN objects
As of commit ec8bf3b650bf ("mlxsw: spectrum_switchdev: Avoid returning
errors in commit phase"), the mlxsw driver performs the VLAN object
offloading during the prepare phase. So conversion just seems to be a
matter of removing the code that was running in the commit phase.
Ido Schimmel explains that the reason why mlxsw_sp_span_respin is called
unconditionally is because the bridge driver will ignore -EOPNOTSUPP and
actually add the VLAN on the bridge device - see commit d42bbf8c7766
("net: bridge: Notify about bridge VLANs") and commit 3c5213cf8d03
("mlxsw: spectrum_switchdev: Ignore bridge VLAN events"). Since the VLAN
was successfully added on the bridge device, mlxsw_sp_span_respin_work()
should be able to resolve the egress port for a packet that is mirrored
to a gre tap and passes through the bridge device. Therefore keep the
logic as it is.
Vladimir Oltean [Sat, 9 Jan 2021 00:01:53 +0000 (02:01 +0200)]
net: dsa: remove the transactional logic from VLAN objects
It should be the driver's business to logically separate its VLAN
offloading into a preparation and a commit phase, and some drivers don't
need / can't do this.
So remove the transactional shim from DSA and let drivers propagate
errors directly from the .port_vlan_add callback.
It would appear that the code has worse error handling now than it had
before. DSA is the only in-kernel user of switchdev that offloads one
switchdev object to more than one port: for every VLAN object offloaded
to a user port, that VLAN is also offloaded to the CPU port. So the
"prepare for user port -> check for errors -> prepare for CPU port ->
check for errors -> commit for user port -> commit for CPU port"
sequence appears to make more sense than the one we are using now:
"offload to user port -> check for errors -> offload to CPU port ->
check for errors", but it is really a compromise. In the new way, we can
catch errors from the commit phase that we previously had to ignore.
But we have our hands tied and cannot do any rollback now: if we add a
VLAN on the CPU port and it fails, we can't do the rollback by simply
deleting it from the user port, because the switchdev API is not so nice
with us: it could have simply been there already, even with the same
flags. So we don't even attempt to rollback anything on addition error,
just leave whatever VLANs managed to get offloaded right where they are.
This should not be a problem at all in practice.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 9 Jan 2021 00:01:52 +0000 (02:01 +0200)]
net: dsa: remove the transactional logic from MDB entries
For many drivers, the .port_mdb_prepare callback was not a good opportunity
to avoid any error condition, and they would suppress errors found during
the actual commit phase.
Where a logical separation between the prepare and the commit phase
existed, the function that used to implement the .port_mdb_prepare
callback still exists, but now it is called directly from .port_mdb_add,
which was modified to return an int code.
Vladimir Oltean [Sat, 9 Jan 2021 00:01:51 +0000 (02:01 +0200)]
net: dsa: remove the transactional logic from ageing time notifiers
Remove the shim introduced in DSA for offloading the bridge ageing time
from switchdev, by first checking whether the ageing time is within the
range limits requested by the driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 9 Jan 2021 00:01:50 +0000 (02:01 +0200)]
net: switchdev: remove the transaction structure from port attributes
Since the introduction of the switchdev API, port attributes were
transmitted to drivers for offloading using a two-step transactional
model, with a prepare phase that was supposed to catch all errors, and a
commit phase that was supposed to never fail.
Some classes of failures can never be avoided, like hardware access, or
memory allocation. In the latter case, merely attempting to move the
memory allocation to the preparation phase makes it impossible to avoid
memory leaks, since commit 1581886da9c5 ("switchdev: Remove unused
transaction item queue") which has removed the unused mechanism of
passing on the allocated memory between one phase and another.
It is time we admit that separating the preparation from the commit
phase is something that is best left for the driver to decide, and not
something that should be baked into the API, especially since there are
no switchdev callers that depend on this.
This patch removes the struct switchdev_trans member from switchdev port
attribute notifier structures, and converts drivers to not look at this
member.
In part, this patch contains a revert of my previous commit 6e4cbb6620ae
("net: dsa: propagate switchdev vlan_filtering prepare phase to
drivers").
For the most part, the conversion was trivial except for:
- Rocker's world implementation based on Broadcom OF-DPA had an odd
implementation of ofdpa_port_attr_bridge_flags_set. The conversion was
done mechanically, by pasting the implementation twice, then only
keeping the code that would get executed during prepare phase on top,
then only keeping the code that gets executed during the commit phase
on bottom, then simplifying the resulting code until this was obtained.
- DSA's offloading of STP state, bridge flags, VLAN filtering and
multicast router could be converted right away. But the ageing time
could not, so a shim was introduced and this was left for a further
commit.
Vladimir Oltean [Sat, 9 Jan 2021 00:01:49 +0000 (02:01 +0200)]
net: switchdev: delete switchdev_port_obj_add_now
After the removal of the transactional model inside
switchdev_port_obj_add_now, it has no added value and we can just call
switchdev_port_obj_notify directly, bypassing this function. Let's
delete it.
Vladimir Oltean [Sat, 9 Jan 2021 00:01:48 +0000 (02:01 +0200)]
net: switchdev: remove the transaction structure from port object notifiers
Since the introduction of the switchdev API, port objects were
transmitted to drivers for offloading using a two-step transactional
model, with a prepare phase that was supposed to catch all errors, and a
commit phase that was supposed to never fail.
Some classes of failures can never be avoided, like hardware access, or
memory allocation. In the latter case, merely attempting to move the
memory allocation to the preparation phase makes it impossible to avoid
memory leaks, since commit 1581886da9c5 ("switchdev: Remove unused
transaction item queue") which has removed the unused mechanism of
passing on the allocated memory between one phase and another.
It is time we admit that separating the preparation from the commit
phase is something that is best left for the driver to decide, and not
something that should be baked into the API, especially since there are
no switchdev callers that depend on this.
This patch removes the struct switchdev_trans member from switchdev port
object notifier structures, and converts drivers to not look at this
member.
Where driver conversion is trivial (like in the case of the Marvell
Prestera driver, NXP DPAA2 switch, TI CPSW, and Rocker drivers), it is
done in this patch.
Where driver conversion needs more attention (DSA, Mellanox Spectrum),
the conversion is left for subsequent patches and here we only fake the
prepare/commit phases at a lower level, just not in the switchdev
notifier itself.
Where the code has a natural structure that is best left alone as a
preparation and a commit phase (as in the case of the Ocelot switch),
that structure is left in place, just made to not depend upon the
switchdev transactional model.
Vladimir Oltean [Sat, 9 Jan 2021 00:01:47 +0000 (02:01 +0200)]
net: dsa: mv88e6xxx: deny vid 0 on the CPU port and DSA links too
mv88e6xxx apparently has a problem offloading VID 0, which the 8021q
module tries to install as part of commit c3892c42b0dd ("vlan_dev: VLAN
0 should be treated as "no vlan tag" (802.1p packet)"). That mv88e6xxx
restriction seems to have been introduced by the "VTU GetNext VID-1
trick to retrieve a single entry" - see commit 2519de2df725 ("net: dsa:
mv88e6xxx: extract single VLAN retrieval").
There is one more problem. The mv88e6xxx CPU port and DSA links do not
report properly in the prepare phase what are the VLANs that they can
offload. They'll say they can offload everything:
What prevents this condition from triggering in real life? The fact that
when a DSA_NOTIFIER_VLAN_ADD is emitted, it never targets a DSA link
directly. Instead, the notifier will always target either a user port or
a CPU port. DSA links just happen to get dragged in by:
static bool dsa_switch_vlan_match(struct dsa_switch *ds, int port,
struct dsa_notifier_vlan_info *info)
{
...
if (dsa_is_dsa_port(ds, port))
return true;
...
}
So for every DSA VLAN notifier, during the prepare phase, it will just
so happen that there will be somebody to say "no, don't do that".
This will become a problem when the switchdev prepare/commit transactional
model goes away. Every port needs to think on its own. DSA links can no
longer bluff and rely on the fact that the prepare phase will not go
through to the end, because there will be no prepare phase any longer.
Fix this issue before it becomes a problem, by having the "vid == 0"
check earlier than the check whether we are a CPU port / DSA link or not.
Also, the "vid == 0" check becomes unnecessary in the .port_vlan_add
callback, so we can remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 9 Jan 2021 00:01:46 +0000 (02:01 +0200)]
net: switchdev: remove vid_begin -> vid_end range from VLAN objects
The call path of a switchdev VLAN addition to the bridge looks something
like this today:
nbp_vlan_init
| __br_vlan_set_default_pvid
| | |
| | br_afspec |
| | | |
| | v |
| | br_process_vlan_info |
| | | |
| | v |
| | br_vlan_info |
| | / \ /
| | / \ /
| | / \ /
| | / \ /
v v v v v
nbp_vlan_add br_vlan_add ------+
| ^ ^ | |
| / | | |
| / / / |
\ br_vlan_get_master/ / v
\ ^ / / br_vlan_add_existing
\ | / / |
\ | / / /
\ | / / /
\ | / / /
\ | / / /
v | | v /
__vlan_add /
/ | /
/ | /
v | /
__vlan_vid_add | /
\ | /
v v v
br_switchdev_port_vlan_add
The ranges UAPI was introduced to the bridge in commit 57540eed2da2
("bridge: support for multiple vlans and vlan ranges in setlink and
dellink requests") (Jan 10 2015). But the VLAN ranges (parsed in br_afspec)
have always been passed one by one, through struct bridge_vlan_info
tmp_vinfo, to br_vlan_info. So the range never went too far in depth.
Then Scott Feldman introduced the switchdev_port_bridge_setlink function
in commit 0c2bb571c6f2 ("switchdev: add new switchdev bridge setlink").
That marked the introduction of the SWITCHDEV_OBJ_PORT_VLAN, which made
full use of the range. But switchdev_port_bridge_setlink was called like
this:
Basically, the switchdev and the bridge code were not tightly integrated.
Then commit 584cbdf1122d ("bridge: restore br_setlink back to original")
came, and switchdev drivers were required to implement
.ndo_bridge_setlink = switchdev_port_bridge_setlink for a while.
In the meantime, commits such as 327c8face813 ("bridge: try switchdev op
first in __vlan_vid_add/del") finally made switchdev penetrate the
br_vlan_info() barrier and start to develop the call path we have today.
But remember, br_vlan_info() still receives VLANs one by one.
Then Arkadi Sharshevsky refactored the switchdev API in 2017 in commit 14e894c6f63a ("net: switchdev: Remove bridge bypass support from
switchdev") so that drivers would not implement .ndo_bridge_setlink any
longer. The switchdev_port_bridge_setlink also got deleted.
This refactoring removed the parallel bridge_setlink implementation from
switchdev, and left the only switchdev VLAN objects to be the ones
offloaded from __vlan_vid_add (basically RX filtering) and __vlan_add
(the latter coming from commit d42bbf8c7766 ("net: bridge: Notify about
bridge VLANs")).
That is to say, today the switchdev VLAN object ranges are not used in
the kernel. Refactoring the above call path is a bit complicated, when
the bridge VLAN call path is already a bit complicated.
Let's go off and finish the job of commit 14e894c6f63a by deleting the
bogus iteration through the VLAN ranges from the drivers. Some aspects
of this feature never made too much sense in the first place. For
example, what is a range of VLANs all having the BRIDGE_VLAN_INFO_PVID
flag supposed to mean, when a port can obviously have a single pvid?
This particular configuration _is_ denied as of commit 22c383aa0169
("bridge: vlan: enforce no pvid flag in vlan ranges"), but from an API
perspective, the driver still has to play pretend, and only offload the
vlan->vid_end as pvid. And the addition of a switchdev VLAN object can
modify the flags of another, completely unrelated, switchdev VLAN
object! (a VLAN that is PVID will invalidate the PVID flag from whatever
other VLAN had previously been offloaded with switchdev and had that
flag. Yet switchdev never notifies about that change, drivers are
supposed to guess).
Nonetheless, having a VLAN range in the API makes error handling look
scarier than it really is - unwinding on errors and all of that.
When in reality, no one really calls this API with more than one VLAN.
It is all unnecessary complexity.
And despite appearing pretentious (two-phase transactional model and
all), the switchdev API is really sloppy because the VLAN addition and
removal operations are not paired with one another (you can add a VLAN
100 times and delete it just once). The bridge notifies through
switchdev of a VLAN addition not only when the flags of an existing VLAN
change, but also when nothing changes. There are switchdev drivers out
there who don't like adding a VLAN that has already been added, and
those checks don't really belong at driver level. But the fact that the
API contains ranges is yet another factor that prevents this from being
addressed in the future.
Of the existing switchdev pieces of hardware, it appears that only
Mellanox Spectrum supports offloading more than one VLAN at a time,
through mlxsw_sp_port_vlan_set. I have kept that code internal to the
driver, because there is some more bookkeeping that makes use of it, but
I deleted it from the switchdev API. But since the switchdev support for
ranges has already been de facto deleted by a Mellanox employee and
nobody noticed for 4 years, I'm going to assume it's not a biggie.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> # switchdev and mlxsw Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Sun, 10 Jan 2021 12:17:52 +0000 (13:17 +0100)]
r8169: deprecate support for RTL_GIGA_MAC_VER_27
RTL8168dp is ancient anyway, and I haven't seen any trace of its early
version 27 yet. This chip versions needs quite some special handling,
therefore it would facilitate driver maintenance if support for it
could be dropped. For now just disable detection of this chip version.
If nobody complains we can remove support for it in the near future.
Rafał Miłecki [Wed, 6 Jan 2021 21:32:02 +0000 (22:32 +0100)]
net: dsa: bcm_sf2: support BCM4908's integrated switch
BCM4908 family SoCs come with integrated Starfighter 2 switch. Its
registers layout it a mix of BCM7278 and BCM7445. It has 5 integrated
PHYs and 8 ports. It also supports RGMII and SerDes.
====================
MPTCP: Add MP_PRIO support and rework local address IDs
Patches 1 and 2 rework the assignment of local address IDs to allow them
to be assigned by a userspace path manager, and add corresponding self
tests.
Patches 2-8 add the ability to change subflow priority after a subflow
has been established. Each subflow in a MPTCP connection has a priority
level: "regular" or "backup". Data should only be sent on backup
subflows if no regular subflows are available. The priority level can be
set when the subflow connection is established (as was already
implemented), or during the life of the connection by sending MP_PRIO in
the TCP options (as added here). Self tests are included.
====================
Geliang Tang [Sat, 9 Jan 2021 00:48:02 +0000 (16:48 -0800)]
selftests: mptcp: add the MP_PRIO testcases
This patch added the MP_PRIO testcases:
Add a new argument bkup for run_tests and do_transfer, it can be set as
"backup" or "nobackup", the default value is "".
Add a new function chk_prio_nr to check the MP_PRIO related MIB counters.
The output looks like this:
29 single subflow, backup syn[ ok ] - synack[ ok ] - ack[ ok ]
ptx[ ok ] - prx [ ok ]
30 single address, backup syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
ptx[ ok ] - prx [ ok ]
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Sat, 9 Jan 2021 00:48:00 +0000 (16:48 -0800)]
selftests: mptcp: add set_flags command in pm_nl_ctl
This patch added the set_flags command in pm_nl_ctl, currently we can only
set two flags: backup and nobackup. The set_flags command can be used like
this:
# pm_nl_ctl set 10.0.0.1 flags backup
# pm_nl_ctl set 10.0.0.1 flags nobackup
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Sat, 9 Jan 2021 00:47:59 +0000 (16:47 -0800)]
mptcp: add set_flags command in PM netlink
This patch added a new command MPTCP_PM_CMD_SET_FLAGS in PM netlink:
In mptcp_nl_cmd_set_flags, parse the input address, get the backup value
according to whether the address's FLAG_BACKUP flag is set from the
user-space. Then check whether this address had been added in the local
address list. If it had been, then call mptcp_nl_addr_backup to deal with
this address.
In mptcp_nl_addr_backup, traverse all the existing msk sockets to find
the relevant sockets, and call mptcp_pm_nl_mp_prio_send_ack to send out
a MP_PRIO ACK packet.
Finally in mptcp_nl_cmd_set_flags, set or clear the address's FLAG_BACKUP
flag.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Sat, 9 Jan 2021 00:47:58 +0000 (16:47 -0800)]
mptcp: add the incoming MP_PRIO support
This patch added the incoming MP_PRIO logic:
Added a flag named mp_prio in struct mptcp_options_received, to mark the
MP_PRIO is received, and save the priority value to struct
mptcp_options_received's backup member. Then invoke
mptcp_pm_mp_prio_received with the receiving subsocket and the backup
value.
In mptcp_pm_mp_prio_received, get the subflow context according the input
subsocket, and change the subflow's backup as the incoming priority value.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Sat, 9 Jan 2021 00:47:57 +0000 (16:47 -0800)]
mptcp: add the outgoing MP_PRIO support
This patch added the outgoing MP_PRIO logic:
In mptcp_pm_nl_mp_prio_send_ack, find the related subflow and subsocket
according to the input parameter addr. Save the input priority value to
suflow's backup, then set subflow's send_mp_prio flag to true, and save
the input priority value to suflow's request_bkup. Finally, send out a
pure ACK on the related subsocket.
In mptcp_established_options_mp_prio, check whether the subflow's
send_mp_prio is set. If it is, this is the packet for sending MP_PRIO.
So save subflow->request_bkup value to mptcp_out_options's backup, and
change the option type to OPTION_MPTCP_PRIO.
In mptcp_write_options, clear the send_mp_prio flag and send out the
MP_PRIO suboption with mptcp_out_options's backup value.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Sat, 9 Jan 2021 00:47:56 +0000 (16:47 -0800)]
selftests: mptcp: add testcases for setting the address ID
Since the address ID can be set from user-space, some of the tests in
pm_netlink.sh will fail. This patch fixed the failures, and add the
testcases for setting the address ID.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Sat, 9 Jan 2021 00:47:55 +0000 (16:47 -0800)]
mptcp: add the address ID assignment bitmap
Currently the address ID set by the netlink PM from user-space is
overridden by the kernel. This patch added the address ID assignment
bitmap to allow user-space to set the address ID.
Use a per netns bitmask id_bitmap (256 bits) to keep track of in-use IDs.
And use next_id to keep track of the highest ID currently in use. If the
user-space provides an ID at endpoint creation time, try to use it. If
already in use, endpoint creation fails. Otherwise pick the first ID
available after the highest currently in use, with wrap-around.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 8 Jan 2021 23:30:54 +0000 (01:30 +0200)]
net: dsa: dsa_legacy_fdb_{add,del} can be static
Introduced in commit 2ef4236cffea ("net: dsa: Move FDB add/del
implementation inside DSA") in net/dsa/legacy.c, these functions were
moved again to slave.c as part of commit 5ac990e47c62 ("net: dsa: Allow
compiling out legacy support"), before actually deleting net/dsa/slave.c
in 0820904404b2 ("net: dsa: Remove legacy probing support"). Along with
that movement there should have been a deletion of the prototypes from
dsa_priv.h, they are not useful.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210108233054.1222278-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sun, 10 Jan 2021 00:21:33 +0000 (16:21 -0800)]
Merge branch 'dpaa2-mac-various-updates'
Ioana Ciornei says:
====================
dpaa2-mac: various updates
The first two patches of this series extends the MAC statistics support
to also work for network interfaces which have their link status handled
by firmware (TYPE_FIXED).
The next two patches are fixing a sporadic problem which happens when
the connected DPMAC object is not yet discovered by the fsl-mc bus, thus
the dpaa2-eth is not able to get a reference to it. A referred probe
will be requested in this case.
Finally, the last two patches make some cosmetic changes, mostly
removing comments and unnecessary checks.
Changes in v2:
- replaced IS_ERR_OR_NULL() by IS_ERR() in patch 4/6
- reworded the commit message of patch 6/6
====================
Ioana Ciornei [Fri, 8 Jan 2021 09:07:27 +0000 (11:07 +0200)]
dpaa2-mac: remove a comment regarding pause settings
The MC firmware takes these PAUSE/ASYM_PAUSE flags provided by the
driver, transforms them back into rx/tx pause enablement status and
applies them to hardware. We are not losing information by this
transformation, thus remove the comment.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 8 Jan 2021 09:07:26 +0000 (11:07 +0200)]
dpaa2-mac: remove an unnecessary check
The dpaa2-eth driver has phylink integration only if the connected dpmac
object is in TYPE_PHY (aka the PCS/PHY etc link status is managed by
Linux instead of the firmware). The check is thus unnecessary because
the code path that reaches the .mac_link_up() callback is only with
TYPE_PHY dpmac objects.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 8 Jan 2021 09:07:25 +0000 (11:07 +0200)]
dpaa2-eth: retry the probe when the MAC is not yet discovered on the bus
The fsl_mc_get_endpoint() function now returns -EPROBE_DEFER when the
dpmac device was not yet discovered by the fsl-mc bus. When this
happens, pass the error code up so that we can retry the probe at a
later time.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 8 Jan 2021 09:07:24 +0000 (11:07 +0200)]
bus: fsl-mc: return -EPROBE_DEFER when a device is not yet discovered
The fsl_mc_get_endpoint() should return a pointer to the connected
fsl_mc device, if there is one. By interrogating the MC firmware, we
know if there is an endpoint or not so when the endpoint device is
actually searched on the fsl-mc bus and not found we are hitting the
case in which the device has not been yet discovered by the bus.
Return -EPROBE_DEFER so that callers can differentiate this case.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 8 Jan 2021 09:07:23 +0000 (11:07 +0200)]
dpaa2-mac: export MAC counters even when in TYPE_FIXED
If the network interface object is connected to a MAC of TYPE_FIXED, the
link status management is handled exclusively by the firmware. This does
not mean that the driver cannot access the MAC counters and export them
in ethtool.
For this to happen, we open the attached dpmac device and keep a pointer
to it in priv->mac. Because of this, all the checks in the driver of the
following form 'if (priv->mac)' have to be updated to actually check
the dpmac attribute and not rely on the presence of a non-NULL value.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 8 Jan 2021 09:07:22 +0000 (11:07 +0200)]
dpaa2-mac: split up initializing the MAC object from connecting to it
Split up the initialization phase of the dpmac object from actually
configuring the phylink instance, connecting to it and configuring the
MAC. This is done so that even though the dpni object is connected to a
dpmac which has link management handled by the firmware we are still
able to export the MAC counters.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 8 Jan 2021 11:39:03 +0000 (03:39 -0800)]
net-gro: remove GRO_DROP
GRO_DROP can only be returned from napi_gro_frags()
if the skb has not been allocated by a prior napi_get_frags()
Since drivers must use napi_get_frags() and test its result
before populating the skb with metadata, we can safely remove
GRO_DROP since it offers no practical use.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 9 Jan 2021 21:51:39 +0000 (13:51 -0800)]
Merge branch 'net-ipa-support-compile_test'
Alex Elder says:
====================
net: ipa: support COMPILE_TEST
This series adds the IPA driver as a possible target when
the COMPILE_TEST configuration is enabled. Two small changes to
dependent subsystems needed to be made for this to work.
Version 2 of this series adds one more patch, which adds the
declation of struct page to "gsi_trans.h". The Intel kernel test
robot reported that this was a problem for the alpha build.
====================
Alex Elder [Thu, 7 Jan 2021 23:34:03 +0000 (17:34 -0600)]
net: ipa: declare the page pointer type in "gsi_trans.h"
The second argument to gsi_trans_page_add() is a page pointer.
That declaration is found in header files used by "gsi_trans.h" for
(at least) arm64 and x86 builds, but apparently not for alpha
builds.
Fix this by adding a declaration of struct page to the top of
"gsi_trans.h".
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 7 Jan 2021 23:34:02 +0000 (17:34 -0600)]
soc: qcom: mdt_loader: define stubs for COMPILE_TEST
Define stub functions for the exposed MDT functions in case
QCOM_MDT_LOADER is not configured. This allows users of these
functions to link correctly for COMPILE_TEST builds without
QCOM_SCM enabled.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 7 Jan 2021 23:34:01 +0000 (17:34 -0600)]
remoteproc: qcom: expose types for COMPILE_TEST
Stub functions are defined for SSR notifier registration in case
QCOM_RPROC_COMMON is not configured. As a result, code that uses
these functions can link successfully even if the common remoteproc
code is not built.
Code that registers an SSR notifier function likely needs the
types defined in "qcom_rproc.h", but those are only exposed if
QCOM_RPROC_COMMON is enabled.
Rearrange the conditional definition so the qcom_ssr_notify_data
structure and qcom_ssr_notify_type enumerated type are defined
whether or not QCOM_RPROC_COMMON is enabled.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lijun Pan [Wed, 6 Jan 2021 21:35:14 +0000 (15:35 -0600)]
ibmvnic: merge do_change_param_reset into do_reset
Commit 2086e7d27251 ("net/ibmvnic: unlock rtnl_lock in reset so
linkwatch_event can run") introduced do_change_param_reset function to
solve the rtnl lock issue. Majority of the code in do_change_param_reset
duplicates do_reset. Also, we can handle the rtnl lock issue in do_reset
itself. Hence merge do_change_param_reset back into do_reset to clean up
the code.
Julian Wiedmann [Thu, 7 Jan 2021 14:39:56 +0000 (15:39 +0100)]
ppp: clean up endianness conversions
sparse complains about some harmless endianness issues:
> drivers/net/ppp/pptp.c:281:21: warning: incorrect type in assignment (different base types)
> drivers/net/ppp/pptp.c:281:21: expected unsigned int [usertype] ack
> drivers/net/ppp/pptp.c:281:21: got restricted __be32
> drivers/net/ppp/pptp.c:283:23: warning: cast to restricted __be32
Here 'ack' is assigned a value in network-order, and then also the
byte-swapped value in host-order. Clean this up by doing the byte-swap
as part of the assignment.
> drivers/net/ppp/pptp.c:358:26: warning: cast from restricted __be16
> drivers/net/ppp/pptp.c:358:26: warning: incorrect type in argument 1 (different base types)
> drivers/net/ppp/pptp.c:358:26: expected unsigned short [usertype] call_id
> drivers/net/ppp/pptp.c:358:26: got restricted __be16 [usertype]
Here we use the wrong flavour of byte-swap. Use ntohs(), which of course
gives the same result.
Julian Wiedmann [Thu, 7 Jan 2021 14:40:08 +0000 (15:40 +0100)]
net: ip_tunnel: clean up endianness conversions
sparse complains about some harmless endianness issues:
> net/ipv4/ip_tunnel_core.c:225:43: warning: cast to restricted __be16
> net/ipv4/ip_tunnel_core.c:225:43: warning: incorrect type in initializer (different base types)
> net/ipv4/ip_tunnel_core.c:225:43: expected restricted __be16 [usertype] mtu
> net/ipv4/ip_tunnel_core.c:225:43: got unsigned short [usertype]
iptunnel_pmtud_build_icmp() uses the wrong flavour of byte-order conversion
when storing the MTU into the ICMPv4 packet. Use htons(), just like
iptunnel_pmtud_build_icmpv6() does.
> net/ipv4/ip_tunnel_core.c:248:35: warning: cast from restricted __be16
> net/ipv4/ip_tunnel_core.c:248:35: warning: incorrect type in argument 3 (different base types)
> net/ipv4/ip_tunnel_core.c:248:35: expected unsigned short type
> net/ipv4/ip_tunnel_core.c:248:35: got restricted __be16 [usertype]
> net/ipv4/ip_tunnel_core.c:341:35: warning: cast from restricted __be16
> net/ipv4/ip_tunnel_core.c:341:35: warning: incorrect type in argument 3 (different base types)
> net/ipv4/ip_tunnel_core.c:341:35: expected unsigned short type
> net/ipv4/ip_tunnel_core.c:341:35: got restricted __be16 [usertype]
eth_header() wants the Ethertype in host-order, use the correct flavour of
byte-order conversion.
> net/ipv4/ip_tunnel_core.c:600:45: warning: restricted __be16 degrades to integer
> net/ipv4/ip_tunnel_core.c:609:30: warning: incorrect type in assignment (different base types)
> net/ipv4/ip_tunnel_core.c:609:30: expected int type
> net/ipv4/ip_tunnel_core.c:609:30: got restricted __be16 [usertype]
> net/ipv4/ip_tunnel_core.c:619:30: warning: incorrect type in assignment (different base types)
> net/ipv4/ip_tunnel_core.c:619:30: expected int type
> net/ipv4/ip_tunnel_core.c:619:30: got restricted __be16 [usertype]
> net/ipv4/ip_tunnel_core.c:629:30: warning: incorrect type in assignment (different base types)
> net/ipv4/ip_tunnel_core.c:629:30: expected int type
> net/ipv4/ip_tunnel_core.c:629:30: got restricted __be16 [usertype]
The TUNNEL_* types are big-endian, so adjust the type of the local
variable in ip_tun_parse_opts().
Rafał Miłecki [Thu, 7 Jan 2021 18:00:49 +0000 (19:00 +0100)]
bgmac: add bgmac_umac_*() helpers for accessing UniMAC registers
UniMAC is a hardware block commonly used in Broadcom Ethernet controllers
that should get its own header file. Not every controller has it mapped at
the 0x800 offset so add bgmac access helpers. They will allow using
shared register defines.
Sergey Shtylyov [Wed, 6 Jan 2021 20:32:29 +0000 (23:32 +0300)]
ravb: update "undocumented" annotations
The "undocumented" annotations in the EtherAVB driver were done against
the R-Car gen2 manuals; most of these registers/bits were then described
in the R-Car gen3 manuals -- reflect this fact in the annotations (note
that ECSIPR.LCHNGIP was documented in the recent R-Car gen2 manual)...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sergey Shtylyov [Wed, 6 Jan 2021 20:31:37 +0000 (23:31 +0300)]
ravb: remove APSR_DM
According to the R-Car Series, 3rd Generation User's Manual: Hardware,
Rev. 1.50, there's no APSR.DM field, instead there are 2 independent
RX/TX clock internal delay bits. Follow the suit: remove #define APSR_DM
and rename #define's APSR_DM_{R|T}DM to APSR_{R|T}DM.
While at it, do several more things to the declaration of *enum* APSR_BIT:
- remove superfluous indentation;
- annotate APSR_MEMS as undocumented;
- annotate APSR as R-Car Gen3 only.
Linus Torvalds [Fri, 8 Jan 2021 20:12:30 +0000 (12:12 -0800)]
Merge tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski:
"Slightly lighter pull request to get back into the Thursday cadence.
Current release - always broken:
- can: mcp251xfd: fix Tx/Rx ring buffer driver race conditions
- dsa: hellcreek: fix led_classdev build errors
Previous releases - regressions:
- ipv6: fib: flush exceptions when purging route to avoid netdev
reference leak
- ip_tunnels: fix pmtu check in nopmtudisc mode
- ip: always refragment ip defragmented packets to avoid MTU issues
when forwarding through tunnels, correct "packet too big" message
is prohibitively tricky to generate
- s390/qeth: fix locking for discipline setup / removal and during
recovery to prevent both deadlocks and races
- mlx5: Use port_num 1 instead of 0 when delete a RoCE address
Previous releases - always broken:
- cdc_ncm: correct overhead calculation in delayed_ndp_size to
prevent out of bound accesses with Huawei 909s-120 LTE module
- fix stmmac dwmac-sun8i suspend/resume:
- PHY being left powered off
- MAC syscon configuration being reset
- reference to the reset controller being improperly dropped
- qrtr: fix null-ptr-deref in qrtr_ns_remove
- can: tcan4x5x: fix bittiming const, use common bittiming from m_can
driver
- mlx5e: CT: Use per flow counter when CT flow accounting is enabled
- mlx5e: Fix SWP offsets when vlan inserted by driver
Misc:
- bpf: Fix a task_iter bug caused by a bpf -> net merge conflict
resolution
And the usual many fixes to various error paths"
* tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE
s390/qeth: fix L2 header access in qeth_l3_osa_features_check()
s390/qeth: fix locking for discipline setup / removal
s390/qeth: fix deadlock during recovery
selftests: fib_nexthops: Fix wrong mausezahn invocation
nexthop: Bounce NHA_GATEWAY in FDB nexthop groups
nexthop: Unlink nexthop group entry in error path
nexthop: Fix off-by-one error in error path
octeontx2-af: fix memory leak of lmac and lmac->name
chtls: Fix chtls resources release sequence
chtls: Added a check to avoid NULL pointer dereference
chtls: Replace skb_dequeue with skb_peek
chtls: Avoid unnecessary freeing of oreq pointer
chtls: Fix panic when route to peer not configured
chtls: Remove invalid set_tcb call
chtls: Fix hardware tid leak
net: ip: always refragment ip defragmented packets
net: fix pmtu check in nopmtudisc mode
selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection tracking
docs: octeontx2: tune rst markup
...
Linus Torvalds [Thu, 7 Jan 2021 17:43:54 +0000 (09:43 -0800)]
poll: fix performance regression due to out-of-line __put_user()
The kernel test robot reported a -5.8% performance regression on the
"poll2" test of will-it-scale, and bisected it to commit fbdc2233a5f5
("x86: Make __put_user() generate an out-of-line call").
I didn't expect an out-of-line __put_user() to matter, because no normal
core code should use that non-checking legacy version of user access any
more. But I had overlooked the very odd poll() usage, which does a
__put_user() to update the 'revents' values of the poll array.
Now, Al Viro correctly points out that instead of updating just the
'revents' field, it would be much simpler to just copy the _whole_
pollfd entry, and then we could just use "copy_to_user()" on the whole
array of entries, the same way we use "copy_from_user()" a few lines
earlier to get the original values.
But that is not what we've traditionally done, and I worry that threaded
applications might be concurrently modifying the other fields of the
pollfd array. So while Al's suggestion is simpler - and perhaps worth
trying in the future - this instead keeps the "just update revents"
model.
To fix the performance regression, use the modern "unsafe_put_user()"
instead of __put_user(), with the proper "user_write_access_begin()"
guarding in place. This improves code generation enormously.
Link: https://lore.kernel.org/lkml/20210107134723.GA28532@xsang-OptiPlex-9020/ Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: Oliver Sang <oliver.sang@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Laight <David.Laight@aculab.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The commit caused that ttynull was used as the default console
on several systems[1][2][3]. As a result, the console was
blank even when a better alternative existed.
It happened when there was no console configured
on the command line and ttynull_init() was the first initcall
calling register_console().
Or it happened when /dev/ did not exist when console_on_rootfs()
was called. It was not able to open /dev/console even though
a console driver was registered. It tried to add ttynull console
but it obviously did not help. But ttynull became the preferred
console and was used by /dev/console when it was available later.
The commit tried to fix a historical problem that have been there
for ages. The primary motivation was the commit fd6761cbe6ab4f7a7c5
("printk/console: Allow to disable console output by using console=""
or console=null"). It provided a clean solution for a workaround
that was widely used and worked only by chance.
This revert causes that the console="" or console=null command line
options will again work only by chance. These options will cause that
a particular console will be preferred and the default (tty) ones
will not get enabled. There will be no console registered at
all. As a result there won't be stdin, stdout, and stderr for
the init process. But it worked exactly this way even before.
The proper solution has to fulfill many conditions:
+ Register ttynull only when explicitly required or as
the ultimate fallback.
+ ttynull should get associated with /dev/console but it must
not become preferred console when used as a fallback.
Especially, it must still be possible to replace it
by a better console later.
Such a change requires clean up of the register_console() code.
Otherwise, it would be even harder to follow. Especially, the use
of has_preferred_console and CON_CONSDEV flag is tricky. The clean
up is risky. The ordering of consoles is not well defined. And
any changes tend to break existing user settings.
Do the revert at the least risky solution for now.
Jakub Kicinski [Fri, 8 Jan 2021 03:13:29 +0000 (19:13 -0800)]
Merge tag 'mlx5-fixes-2021-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-01-07
* tag 'mlx5-fixes-2021-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups
net/mlx5e: Fix two double free cases
net/mlx5: Release devlink object if adev fails
net/mlx5e: ethtool, Fix restriction of autoneg with 56G
net/mlx5e: In skb build skip setting mark in switchdev mode
net/mlx5: E-Switch, fix changing vf VLANID
net/mlx5e: Fix SWP offsets when vlan inserted by driver
net/mlx5e: CT: Use per flow counter when CT flow accounting is enabled
net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address
net/mlx5e: Add missing capability check for uplink follow
net/mlx5: Check if lag is supported before creating one
====================
Jakub Kicinski [Fri, 8 Jan 2021 02:54:08 +0000 (18:54 -0800)]
Merge branch 's390-qeth-fixes-2021-01-07'
Julian Wiedmann says:
====================
s390/qeth: fixes 2021-01-07
This brings two locking fixes for the device control path.
Also one fix for a path where our .ndo_features_check() attempts to
access a non-existent L2 header.
====================
Julian Wiedmann [Thu, 7 Jan 2021 17:24:42 +0000 (18:24 +0100)]
s390/qeth: fix L2 header access in qeth_l3_osa_features_check()
ip_finish_output_gso() may call .ndo_features_check() even before the
skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt
to inspect the L2 header via vlan_eth_hdr().
Switch to vlan_get_protocol(), as already used further down in the
common qeth_features_check() path.
Fixes: 3e592ef10f24 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / kernel.git / log