Meng Li [Wed, 21 Sep 2022 03:20:20 +0000 (11:20 +0800)]
gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully
When running gpio test on nxp-ls1028 platform with below command
gpiomon --num-events=3 --rising-edge gpiochip1 25
There will be a warning trace as below:
Call trace:
free_irq+0x204/0x360
lineevent_free+0x64/0x70
gpio_ioctl+0x598/0x6a0
__arm64_sys_ioctl+0xb4/0x100
invoke_syscall+0x5c/0x130
......
el0t_64_sync+0x1a0/0x1a4
The reason of this issue is that calling request_threaded_irq()
function failed, and then lineevent_free() is invoked to release
the resource. Since the lineevent_state::irq was already set, so
the subsequent invocation of free_irq() would trigger the above
warning call trace. To fix this issue, set the lineevent_state::irq
after the IRQ register successfully.
Fixes: 468242724143 ("gpiolib: cdev: refactor lineevent cleanup into lineevent_free") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Reviewed-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
gpio: mockup: fix NULL pointer dereference when removing debugfs
We now remove the device's debugfs entries when unbinding the driver.
This now causes a NULL-pointer dereference on module exit because the
platform devices are unregistered *after* the global debugfs directory
has been recursively removed. Fix it by unregistering the devices first.
Merge tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Some small parisc architecture fixes for 6.0-rc6:
One patch lightens up a previous commit and thus unbreaks building the
debian kernel, which tries to configure a 64-bit kernel with the
ARCH=parisc environment variable set.
The other patches fixes asm/errno.h includes in the tools directory
and cleans up memory allocation in the iosapic driver.
Summary:
- Allow configuring 64-bit kernel with ARCH=parisc
- Fix asm/errno.h includes in tools directory for parisc and xtensa
- Clean up iosapic memory allocation
- Minor typo and spelling fixes"
* tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Allow CONFIG_64BIT with ARCH=parisc
parisc: remove obsolete manual allocation aligning in iosapic
tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa
Input: hp_sdc: fix spelling typo in comment
parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
Merge tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Nothing really major here, but figured it'd be nicer to just get these
flushed out for -rc6 so that the 6.1 branch will have them as well.
That'll make our lives easier going forward in terms of development,
and avoid trivial conflicts in this area.
- Simple trace rename so that the returned opcode name is consistent
with the enum definition (Stefan)
- Send zc rsrc request vs notification lifetime fix (Pavel)"
* tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linux:
io_uring/opdef: rename SENDZC_NOTIF to SEND_ZC
io_uring/net: fix zc fixed buf lifetime
Merge tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the level-low interrupt type support in gpio-mpc8xxx
- convert another two drivers to using immutable irq chips
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mt7621: Make the irqchip immutable
gpio: ixp4xx: Make irqchip immutable
MAINTAINERS: Update HiSilicon GPIO Driver maintainer
gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
Merge tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two fixes for -rc6:
- Fix a mixup of sectors and bytes in the secure erase ioctl
(Mikulas)
- Fix for a bad return value for a non-blocking bio/blk queue enter
call (me)"
* tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
blk-lib: fix blkdev_issue_secure_erase
block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait
Merge tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two small patches:
- Fix using an unsigned type for the return value, introduced in this
release (Pavel)
- Stable fix for a missing check for a fixed file on put (me)"
* tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
io_uring/msg_ring: check file type before putting
io_uring/rw: fix error'ed retry return values
Merge tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the regular drm fixes pull.
The i915 and misc fixes are fairly regular, but the amdgpu contains
fixes for new hw blocks, the dcn314 specific path hookups and also has
a bunch of fixes for clang stack size warnings which are a bit churny
but fairly straightforward. This means it looks a little larger than
usual.
amdgpu:
- BACO fixes for some RDNA2 boards
- PCI AER fixes uncovered by a core PCI change
- Properly hook up dirtyfb helper
- RAS fixes for GC 11.x
- TMR fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- LLVM DML stack size fixes
i915:
- Revert a display patch around max DP source rate now that the
proper WaEdpLinkRateDataReload is in place
- Fix perf limit reasons bit position
- Fix unclaimmed mmio registers on suspend flow with GuC
- A vma_move_to_active fix for a regression with video decoding
- DP DSP fix
gma500:
- Locking and IRQ fixes
meson:
- OSD1 display fixes
panel-edp:
- Fix Innolux timings
rockchip:
- DP/HDMI fixes"
* tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/amdgpu: make sure to init common IP before gmc
drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega
drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega
drm/rockchip: Fix return type of cdn_dp_connector_mode_valid
drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usage
drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()
drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()
drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport()
drm/amd/display: Refactor SubVP calculation to remove FPU
drm/amd/display: Limit user regamma to a valid value
drm/amd/display: add workaround for subvp cursor corruption for DCN32/321
drm/amd/display: SW cursor fallback for SubVP
drm/amd/display: Round cursor width up for MALL allocation
drm/amd/display: Correct dram channel width for dcn314
drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314
drm/amd/display: Hook up DCN314 specific dml implementation
drm/amd/display: Enable dlg and vba compilation for dcn314
drm/amd/display: Fix compilation errors on DCN314
drm/amd/display: Fix divide by zero in DML
...
Merge tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four smb3 fixes for stable:
- important fix to revalidate mapping when doing direct writes
- missing spinlock
- two fixes to socket handling
- trivial change to update internal version number for cifs.ko"
* tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: add missing spinlock around tcon refcount
cifs: always initialize struct msghdr smb_msg completely
cifs: don't send down the destination address to sendmsg for a SOCK_STREAM
cifs: revalidate mapping when doing direct writes
Dave Airlie [Fri, 16 Sep 2022 07:49:46 +0000 (17:49 +1000)]
Merge tag 'drm-intel-fixes-2022-09-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Revert a display patch around max DP source rate now
that the proper WaEdpLinkRateDataReload is in place. (Ville)
- Fix perf limit reasons bit position. (Ashutosh)
- Fix unclaimmed mmio registers on suspend flow with GuC. (Umesh)
- A vma_move_to_active fix for a regression with video decoding. (Nirmoy)
- DP DSP fix. (Ankit)
If we're invoked with a fixed file, follow the normal rules of not
calling io_fput_file(). Fixed files are permanently registered to the
ring, and do not need putting separately.
Cc: stable@vger.kernel.org Fixes: aa184e8671f0 ("io_uring: don't attempt to IOPOLL for MSG_RING requests") Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a bug in blkdev_issue_secure_erase. The statement
"unsigned int len = min_t(sector_t, nr_sects, max_sectors);"
sets the variable "len" to the length in sectors, but the statement
"bio->bi_iter.bi_size = len" treats it as if it were in bytes.
The statements "sector += len << SECTOR_SHIFT" and "nr_sects -= len <<
SECTOR_SHIFT" are thinko.
The previous patch triggered a build failure for the debian kernel,
which has CONFIG_64BIT enabled, uses the CROSS_COMPILER environment
variable and uses ARCH=parisc to configure the kernel for 64-bit
support.
This patch weakens the previous patch while keeping the recommended way
to configure the kernel with:
ARCH=parisc -> build 32-bit kernel
ARCH=parisc64 -> build 64-bit kernel
while adding the possibility for debian to configure a 64-bit kernel
even if ARCH=parisc is set (PA8X00 CPU has to be selected and
CONFIG_64BIT needs to be enabled).
The downside of this patch is, that we now have a small window open
again where people may get it wrong: if they enable CONFIG_64BIT and try
to compile with a 32-bit compiler.
Fixes: 3dcfb729b5f4 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only") Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # 5.15+
Alex Deucher [Tue, 30 Aug 2022 14:59:49 +0000 (10:59 -0400)]
drm/amdgpu: make sure to init common IP before gmc
Move common IP init before GMC init so that HDP gets
remapped before GMC init which uses it.
This fixes the Unsupported Request error reported through
AER during driver load. The error happens as a write happens
to the remap offset before real remapping is done.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Deucher [Fri, 9 Sep 2022 15:53:27 +0000 (11:53 -0400)]
drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega
This mirrors what we do for other asics and this way we are
sure the sdma doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. However, the statement says that it applies to
multimedia as well, but the VCN code currently initializes
doorbells after GFX and there are no known issues there. In my
testing at least I don't see any problems on SDMA.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Deucher [Fri, 9 Sep 2022 15:47:20 +0000 (11:47 -0400)]
drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega
This mirrors what we do for other asics and this way we are
sure the ih doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. In this case IH is initialized before GFX,
so there should be no issue.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
When an external device generated a level based interrupt then the
interrupt controller could miss the interrupt. The reason is that the
interrupt controller can detect only link changes.
In the following example, if there is a PHY that generates an interrupt
then the following would happen. The GPIO detected that the interrupt
line changed, and then the 'ocelot_irq_handler' was called. Here it
detects which GPIO line saw the change and for that will call the
following:
1. irq_mask
2. phy interrupt routine
3. irq_eoi
4. irq_unmask
And this works fine for simple cases, but if the PHY generates many
interrupts, for example when doing PTP timestamping, then the following
could happen. Again the function 'ocelot_irq_handler' will be called
and then from here the following could happen:
1. irq_mask
2. phy interrupt routine
3. irq_eoi
4. irq_unmask
Right before step 3(irq_eoi), the PHY will generate another interrupt.
Now the interrupt controller will acknowledge the change in the
interrupt line. So we miss the interrupt.
A solution will be to use 'handle_level_irq' instead of
'handle_fasteoi_irq', because for this will change routine order of
handling the interrupt.
1. irq_mask
2. irq_ack
3. phy interrupt routine
4. irq_unmask
And now if the PHY will generate a new interrupt before irq_unmask, the
interrupt controller will detect this because it already acknowledge the
change in interrupt line at step 2(irq_ack).
But this is not the full solution because there is another issue. In
case there are 2 PHYs that share the interrupt line. For example phy1
generates an interrupt, then the following can happen:
1.irq_mask
2.irq_ack
3.phy0 interrupt routine
4.phy1 interrupt routine
5.irq_unmask
In case phy0 will generate an interrupt while clearing the interrupt
source in phy1, then the interrupt line will be kept down by phy0. So
the interrupt controller will not see any changes in the interrupt line.
The solution here is to update 'irq_unmask' such that it can detect if
the interrupt line is still active or not. And if it is active then call
again the procedure to clear the interrupts. But we don't want to do it
every time, only if we know that the interrupt controller has not seen
already that the interrupt line has changed.
While at this, add support also for IRQ_TYPE_LEVEL_LOW.
Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips. Following this change the following warnings
are now observed for the mt7621 driver:
gpio gpiochip0: (1e000600.gpio-bank0): not an immutable chip, please consider fixing it!
gpio gpiochip1: (1e000600.gpio-bank1): not an immutable chip, please consider fixing it!
gpio gpiochip2: (1e000600.gpio-bank2): not an immutable chip, please consider fixing it!
Fix this by making the irqchip in the mt7621 driver immutable.
Merge tag 'devicetree-fixes-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Update some stale binding maintainer emails
- Fix property name error in apple,aic binding
- Add missing param to of_dma_configure_id() stub
- Fix an off-by-one error in unflatten_dt_nodes()
* tag 'devicetree-fixes-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pinctrl: qcom: drop non-working codeaurora.org emails
dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails
dt-bindings: apple,aic: Fix required item "apple,fiq-index" in affinity description
dt-bindings: interconnect: fsl,imx8m-noc: drop Leonard Crestez
of/device: Fix up of_dma_configure_id() stub
MAINTAINERS: Update email of Neil Armstrong
of: fdt: fix off-by-one error in unflatten_dt_nodes()
Paulo Alcantara [Wed, 14 Sep 2022 04:34:51 +0000 (21:34 -0700)]
cifs: add missing spinlock around tcon refcount
Add missing spinlock to protect updates on tcon refcount in
cifs_put_tcon().
Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data") Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
drm/rockchip: Fix return type of cdn_dp_connector_mode_valid
The mode_valid field in drm_connector_helper_funcs is expected to be of
type:
enum drm_mode_status (* mode_valid) (struct drm_connector *connector,
struct drm_display_mode *mode);
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of cdn_dp_connector_mode_valid should be changed from
int to enum drm_mode_status.
So far we were just lucky because the uninitialized members
of struct msghdr are not used by default on a SOCK_STREAM tcp
socket.
But as new things like msg_ubuf and sg_from_iter where added
recently, we should play on the safe side and avoid potention
problems in future.
Signed-off-by: Stefan Metzmacher <metze@samba.org> Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
cifs: don't send down the destination address to sendmsg for a SOCK_STREAM
This is ignored anyway by the tcp layer.
Signed-off-by: Stefan Metzmacher <metze@samba.org> Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Commit a0f7e7f759cf ("drm/amd/display: fix i386 frame size warning")
aimed to address this for i386 but it did not help x86_64.
To reduce the amount of stack space that
dml30_ModeSupportAndSystemConfigurationFull() uses, mark
UseMinimumDCFCLK() as noinline, using the _for_stack variant for
documentation. While this will increase the total amount of stack usage
between the two functions (1632 and 1304 bytes respectively), it will
make sure both stay below the limit of 2048 bytes for these files. The
aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage
so it should not be reverted in favor of this change.
drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml31_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with
LLVM 16 (1976 -> 1864), helping clear up the following clang warning:
drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport()
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml31_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with
LLVM 16 (2216 -> 1976), helping clear up the following clang warning:
drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()
Several of the arguments are identical between the two call sites and
they can be accessed through the 'struct vba_vars_st' pointer. This
reduces the total amount of stack space that
dml32_ModeSupportAndSystemConfigurationFull() uses by 208 bytes with
LLVM 16 (1936 -> 1728), helping clear up the following clang warning:
drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport()
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer created at the
top of dml32_ModeSupportAndSystemConfigurationFull(). This reduces the
total amount of stack space that
dml32_ModeSupportAndSystemConfigurationFull() uses by 216 bytes with
LLVM 16 (2152 -> 1936), helping clear up the following clang warning:
Additionally, while modifying the arguments to
dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport(), use 'v'
consistently, instead of 'v' mixed with 'mode_lib->vba'.
Alvin Lee [Fri, 5 Aug 2022 17:58:00 +0000 (01:58 +0800)]
drm/amd/display: Refactor SubVP calculation to remove FPU
Refactor calculation to remove floating point operations from dmub_srv.
To ensure that 32-bit compilation works well, we use the div64 family of
macros to do integer division for SubVP-related timing parameters.
Cc: Maíra Canal <mairacanal@riseup.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Isabella Basso <isabbasso@riseup.net> Cc: Magali Lemes <magalilemes00@gmail.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Samson Tam <Samson.Tam@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Co-developed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yao Wang1 [Mon, 22 Aug 2022 10:30:31 +0000 (18:30 +0800)]
drm/amd/display: Limit user regamma to a valid value
[Why]
For HDR mode, we get total 512 tf_point and after switching to SDR mode
we actually get 400 tf_point and the rest of points(401~512) still use
dirty value from HDR mode. We should limit the rest of the points to max
value.
[How]
Limit the value when coordinates_x.x > 1, just like what we do in
translate_from_linear_space for other re-gamma build paths.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Yao Wang1 <Yao.Wang1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 25 Aug 2022 19:05:58 +0000 (15:05 -0400)]
drm/amd/display: add workaround for subvp cursor corruption for DCN32/321
[Why&How]
Kernel does not have a means to tell the userspace to use software
cursor. Due to lack of this functionality, reducing the max cursor size
is the only way to ensure that power savings of Subview port feature is
utilized for asics that support it. The workaround could be removed
after cursor caching is fixed while a subviewport config is active.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Wed, 24 Aug 2022 15:53:50 +0000 (11:53 -0400)]
drm/amd/display: SW cursor fallback for SubVP
[Description]
Leverage SW cursor fall back for SubVP when the cursor is too big. We
want to take advantage of being able to fallback to SW cursor when
possible because it's not worth it to disable MCLK switching because the
cursor is slightly too big.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Thu, 25 Aug 2022 16:33:12 +0000 (12:33 -0400)]
drm/amd/display: Round cursor width up for MALL allocation
[Why & How]
When calculating cursor size for MALL allocation, the cursor width should
be the actual width rounded up to 64 alignment. Additionally, the bit
depth should vary depending on color format.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Duncan Ma [Wed, 24 Aug 2022 18:35:03 +0000 (14:35 -0400)]
drm/amd/display: Correct dram channel width for dcn314
[Why]
The interpretation of the number of memory channels
differ by memory type, and this affects channel width
for the DML input.
[How]
Set dram channel width according to memory type for
dcn314.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314
[Why]
HW can support the display swizzle modes for video, and those are
preferable over standard or linear for decode use.
[How]
Remove the check for DCN314.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Hook up DCN314 specific dml implementation
[Why & How]
Add support for the DML314 functions and hook up DCN314 to use them.
This has some necessary additions for calculating Max VSTARTUP for
future features, but there's also some changes that we have to make
for pixel format/swizzle support.
That will come in a following patch to make this transition easier to
bisect.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Enable dlg and vba compilation for dcn314
We were not using the VBA and DLG files for DCN314, but the next
sequence of changes for DCN314 will require those files. This commit
adds the necessary files to the Makefile.
Cc: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have some compilation errors in some DML files from DCN314 that we
never noticed because we were not compiling some of the DML files. This
commit fixes those syntax errors before we enable the compilation.
Cc: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Wed, 24 Aug 2022 20:34:53 +0000 (16:34 -0400)]
drm/amd/display: Fix divide by zero in DML
[why]
Incorrectly using MicroTileWidth instead of MacroTileWidth for
calculations.
[how]
Remove all unused references to MicroTile and change them to MacroTile.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Wed, 24 Aug 2022 19:34:24 +0000 (15:34 -0400)]
drm/amd/display: Fixing DIG FIFO Error
[Why & How]
DIG_FIFO_READ_START_LEVEL should only be set to default value (7) by software.
Removed all instances of resetting the register to 0
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 23 Aug 2022 21:14:03 +0000 (17:14 -0400)]
drm/amd/display: Update MBLK calculation for SubVP
[Description]
Update MBLK calculation according to hardware doc. For DCC case we were
not allocation enough MALL due to an inaccurate MBLK calculation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 11 Aug 2022 20:42:12 +0000 (16:42 -0400)]
drm/amd/display: Revert "Fallback to SW cursor if SubVP + cursor too big"
This reverts commit a4f1b04216023ff0f4cd89328b59ee6890248130 since
returning false in case of SubVP results in no cursor being visible on
desktop as there is no sw cursor fallback path on all platforms.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Aug 2022 15:08:09 +0000 (11:08 -0400)]
drm/amdgpu: add HDP remap functionality to nbio 7.7
Was missing before and would have resulted in a write to
a non-existant register. Normally APUs don't use HDP, but
other asics could use this code and APUs do use the HDP
when used in passthrough.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Fri, 9 Sep 2022 03:06:50 +0000 (11:06 +0800)]
drm/amdgpu: change the alignment size of TMR BO to 1M
align TMR BO size TO tmr size is not necessary,
modify the size to 1M to avoid re-create BO fail
when serious VRAM fragmentation.
v2:
add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Tue, 6 Sep 2022 19:01:49 +0000 (15:01 -0400)]
drm/amdgpu: use dirty framebuffer helper
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use
drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs
struct.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As per PCIE Base Spec r4.0 Section 6.18
'Software must not enable LTR in an Endpoint unless the Root Complex
and all intermediate Switches indicate support for LTR.'
This fixes the Unsupported Request error reported through AER during
ASPM enablement.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Reported-by: Gustaw Smolarczyk <wielkiegie@gmail.com> Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Jay Fang as the maintainer of the HiSilicon GPIO Driver, replacing
Luo Jiaxing.
Cc: Luo Jiaxing <jiaxingluo@autox.ai> Signed-off-by: Jay Fang <f.fangjian@huawei.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Jiaxing Luo <jiaxingluo@autox.ai> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Pavel Begunkov [Tue, 13 Sep 2022 12:21:23 +0000 (13:21 +0100)]
io_uring/rw: fix error'ed retry return values
Kernel test robot reports that we test negativity of an unsigned in
io_fixup_rw_res() after a recent change, which masks error codes and
messes up the return value in case I/O is re-retried and failed with
an error.
Ben Hutchings [Tue, 25 Aug 2020 22:27:40 +0000 (23:27 +0100)]
tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa
tools/include/uapi/asm/errno.h currently attempts to include
non-existent arch-specific errno.h header for xtensa.
Remove this case so that <asm-generic/errno.h> is used instead,
and add the missing arch-specific header for parisc.
Al Viro [Sat, 10 Sep 2022 21:14:02 +0000 (22:14 +0100)]
nfsd_splice_actor(): handle compound pages
pipe_buffer might refer to a compound page (and contain more than a PAGE_SIZE
worth of data). Theoretically it had been possible since way back, but
nfsd_splice_actor() hadn't run into that until copy_page_to_iter() change.
Fortunately, the only thing that changes for compound pages is that we
need to stuff each relevant subpage in and convert the offset into offset
in the first subpage.
Acked-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Fixes: f0f6b614f83d "copy_page_to_iter(): don't split high-order page in case of ITER_PIPE" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge tag 'hyperv-fixes-signed-20220912' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix an error handling issue in DRM driver (Christophe JAILLET)
- Fix some issues in framebuffer driver (Vitaly Kuznetsov)
- Two typo fixes (Jason Wang, Shaomin Deng)
- Drop unnecessary casting in kvp tool (Zhou Jie)
* tag 'hyperv-fixes-signed-20220912' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region
Drivers: hv: Always reserve framebuffer region for Gen1 VMs
PCI: Move PCI_VENDOR_ID_MICROSOFT/PCI_DEVICE_ID_HYPERV_VIDEO definitions to pci_ids.h
tools: hv: kvp: remove unnecessary (void*) conversions
Drivers: hv: remove duplicate word in a comment
tools: hv: Remove an extraneous "the"
drm/hyperv: Fix an error handling path in hyperv_vmbus_probe()
Merge tag 'nfs-for-5.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fix SUNRPC call completion races with call_decode() that trigger a
WARN_ON()
- NFSv4.0 cannot support open-by-filehandle and NFS re-export
- Revert "SUNRPC: Remove unreachable error condition" to allow handling
of error conditions
- Update suid/sgid mode bits after ALLOCATE and DEALLOCATE
* tag 'nfs-for-5.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
Revert "SUNRPC: Remove unreachable error condition"
NFSv4.2: Update mode bits after ALLOCATE and DEALLOCATE
NFSv4: Turn off open-by-filehandle and NFS re-export for NFSv4.0
SUNRPC: Fix call completion races with call_decode()
Ronnie Sahlberg [Mon, 12 Sep 2022 03:04:46 +0000 (13:04 +1000)]
cifs: revalidate mapping when doing direct writes
Kernel bugzilla: 216301
When doing direct writes we need to also invalidate the mapping in case
we have a cached copy of the affected page(s) in memory or else
subsequent reads of the data might return the old/stale content
before we wrote an update to the server.
Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
With the Parade PS8461E MUX workaround (WaEdpLinkRateDataReload)
implemented we can get finally rid of the is_low_voltage_sku()
check that incorrectly prevents many machines from using the
8.1Gpbs link rate.
Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5272 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6323 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-2-ville.syrjala@linux.intel.com Tested-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 483e3d87a37e804588ac8224aadd20a84593cafd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The worker is canceled in gt_park path, but earlier it was assumed that
gt_park path cannot sleep and the cancel is asynchronous. This caused a
race with suspend flow where the worker runs after suspend and causes an
unclaimed register access warning. Cancel the worker synchronously since
the gt_park is indeed allowed to sleep.
v2: Fix author name and sign-off mismatch
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4419 Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220827002135.139349-1-umesh.nerlige.ramappa@intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 31335aa8e08be3fe10c50aecd2f11aba77544a78) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Nirmoy Das [Wed, 7 Sep 2022 17:26:41 +0000 (19:26 +0200)]
drm/i915: Set correct domains values at _i915_vma_move_to_active
Fix regression introduced by commit:
"drm/i915: Individualize fences before adding to dma_resv obj"
which sets obj->read_domains to 0 for both read and write paths.
Also set obj->write_domain to 0 on read path which was removed by
the commit.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6639 Fixes: 420a07b841d0 ("drm/i915: Individualize fences before adding to dma_resv obj") Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Cc: <stable@vger.kernel.org> # v5.16+ Cc: Matthew Auld <matthew.auld@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907172641.12555-1-nirmoy.das@intel.com
(cherry picked from commit 04f7eb3d4582a0a4da67c86e55fda7de2df86d91) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
drm/i915/vdsc: Set VDSC PIC_HEIGHT before using for DP DSC
Currently, pic_height of vdsc_cfg structure is being used to calculate
slice_height, before it is set for DP.
So taking out the lines to set pic_height from the helper
intel_dp_dsc_compute_params() to individual encoders, and setting
pic_height, before it is used to calculate slice_height for DP.
Fixes: 5a6d866f8e1b ("drm/i915: Get slice height before computing rc params") Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220902103219.1168781-1-ankit.k.nautiyal@intel.com
(cherry picked from commit e72df53dcb01ec58e0410da353551adf94c8d0f1) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Merge tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove unused scripts/gcc-ld script
- Add zstd support to scripts/extract-ikconfig
- Check 'make headers' for UML
- Fix scripts/mksysmap to ignore local symbols
* tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
mksysmap: Fix the mismatch of 'L0' symbols in System.map
kbuild: disable header exports for UML in a straightforward way
scripts/extract-ikconfig: add zstd compression support
scripts: remove obsolete gcc-ld script
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three small arm64 fixes, all related to optional architecture
extensions: BTI, SME and 52-bit virtual addressing:
- Disable in-kernel BTI when compiling with GCC, as it makes invalid
assumptions about the distance between functions which has led to
crashes when calling modules on a CPU with BTI support
- Remove bogus TIF_SME flag management if memory allocation fails in
the ptrace code
- Fix the resume path when configured for 52-bit virtual addressing"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: fix resume for 52-bit enabled builds
arm64/ptrace: Don't clear calling process' TIF_SME on OOM
arm64/bti: Disable in kernel BTI when cross section thunks are broken
Merge tag 'iommu-fixes-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d fixes from Lu Baolu:
- Boot kdump kernels with VT-d scalable mode on
- Calculate the right page table levels
- Fix two recursive locking issues
- Fix a lockdep splat issue
- AMD IOMMU fixes:
- Fix for completion-wait command to use full 64 bits of data
- Fix PASID related issue where GPU sound devices failed to
initialize
- Fix for Virtio-IOMMU to report correct caching behavior, needed for
use with VFIO
* tag 'iommu-fixes-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix false ownership failure on AMD systems with PASID activated
iommu/vt-d: Fix possible recursive locking in intel_iommu_init()
iommu/virtio: Fix interaction with VFIO
iommu/vt-d: Fix lockdep splat due to klist iteration in atomic context
iommu/vt-d: Fix recursive lock issue in iommu_flush_dev_iotlb()
iommu/vt-d: Correctly calculate sagaw value of IOMMU
iommu/vt-d: Fix kdump kernels boot failure with scalable mode
iommu/amd: use full 64-bit value in build_completion_wait()
Merge tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for loongson32 starup hang
- fix for octeon irq setup problem
- fix compiler warning for new CONFIG option
- switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM
* tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Select SPARSEMEM_EXTREME
MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()
MIPS: octeon: Get rid of preprocessor directives around RESERVE32
MIPS: loongson32: ls1c: Fix hang during startup
Jason Gunthorpe [Fri, 9 Sep 2022 19:46:31 +0000 (16:46 -0300)]
iommu: Fix false ownership failure on AMD systems with PASID activated
The AMD IOMMU driver cannot activate PASID mode on a RID without the RID's
translation being set to IDENTITY. Further it requires changing the RID's
page table layout from the normal v1 IOMMU_DOMAIN_IDENTITY layout to a
different v2 layout.
It does this by creating a new iommu_domain, configuring that domain for
v2 identity operation and then attaching it to the group, from within the
driver. This logic assumes the group is already set to the IDENTITY domain
and is being used by the DMA API.
However, since the ownership logic is based on the group's domain pointer
equaling the default domain to detect DMA API ownership, this causes it to
look like the group is not attached to the DMA API any more. This blocks
attaching drivers to any other devices in the group.
In a real system this manifests itself as the HD-audio devices on some AMD
platforms losing their device drivers.
Work around this unique behavior of the AMD driver by checking for
equality of IDENTITY domains based on their type, not their pointer
value. This allows the AMD driver to have two IDENTITY domains for
internal purposes without breaking the check.
Have the AMD driver properly declare that the special domain it created is
actually an IDENTITY domain.
Lu Baolu [Sun, 11 Sep 2022 03:18:45 +0000 (11:18 +0800)]
iommu/vt-d: Fix possible recursive locking in intel_iommu_init()
The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac932
("iommu/vt-d: Introduce a rwsem to protect global data structures"). It
is used to protect DMAR related global data from DMAR hotplug operations.
The dmar_global_lock used in the intel_iommu_init() might cause recursive
locking issue, for example, intel_iommu_get_resv_regions() is taking the
dmar_global_lock from within a section where intel_iommu_init() already
holds it via probe_acpi_namespace_devices().
Using dmar_global_lock in intel_iommu_init() could be relaxed since it is
unlikely that any IO board must be hot added before the IOMMU subsystem is
initialized. This eliminates the possible recursive locking issue by moving
down DMAR hotplug support after the IOMMU is initialized and removing the
uses of dmar_global_lock in intel_iommu_init().
Merge tag 's390-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix absolute zero lowcore corruption on kdump when CPU0 is offline
- Fix lowcore protection setup for offline CPU restart
* tag 's390-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/smp: enforce lowcore protection on CPU restart
s390/boot: fix absolute zero lowcore corruption on boot
Merge tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix severe regression in asus-ec-sensors driver
which resulted in EC driver failures
- Fix various bugs in mr75203 driver
- Fix byte order bug in tps23861 driver
* tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) autoload module via DMI data
hwmon: (mr75203) enable polling for all VM channels
hwmon: (mr75203) fix multi-channel voltage reading
hwmon: (mr75203) fix voltage equation for negative source input
hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors
hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined
dt-bindings: hwmon: (mr75203) fix "intel,vm-map" property to be optional
hwmon: (tps23861) fix byte order in resistance register
Merge tag 'dma-mapping-6.0-2022-09-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- revert a panic on swiotlb initialization failure (Yu Zhao)
- fix the lookup for partial syncs in dma-debug (Robin Murphy)
- fix a shift overflow in swiotlb (Chao Gao)
- fix a comment typo in swiotlb (Chao Gao)
- mark a function static now that all abusers are gone (Christoph
Hellwig)
* tag 'dma-mapping-6.0-2022-09-10' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: mark dma_supported static
swiotlb: fix a typo
swiotlb: avoid potential left shift overflow
dma-debug: improve search for partial syncs
Revert "swiotlb: panic if nslabs is too small"
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight patches which looks like quite a large core change, but most of
the diffstat is reverting the attempt to rejig reference counting
introduced in the last merge window which caused issues with device
and module removal.
Of the remaining four patches, only the fix use-after-free is
substantial"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix use-after-free warning
scsi: core: Fix a use-after-free
scsi: core: Revert "Make sure that targets outlive devices"
scsi: core: Revert "Make sure that hosts outlive targets"
scsi: core: Revert "Simplify LLD module reference counting"
scsi: core: Revert "Call blk_mq_free_tag_set() earlier"
scsi: lpfc: Add missing destroy_workqueue() in error path
scsi: lpfc: Return DID_TRANSPORT_DISRUPTED instead of DID_REQUEUE
The L0 symbol exists in System.map, but not in .tmp_System.map. When
"cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms
data" error message in link-vmlinux.sh script.
Merge tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 6.0-rc5.
Included in here are:
- multiple attempts to get the arch_topology code to work properly on
non-cluster SMT systems. First attempt caused build breakages in
linux-next and 0-day, second try worked.
- debugfs fixes for a long-suffering memory leak. The pattern of
debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
add debugfs_lookup_and_remove() to fix this problem. Also fix up
the scheduler debug code that highlighted this problem. Fixes for
other subsystems will be trickling in over the next few months for
this same issue once the debugfs function is merged.
All of these have been in linux-next since Wednesday with no reported
problems"
* tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
arch_topology: Make cluster topology span at least SMT CPUs
sched/debug: fix dentry leak in update_sched_domain_debugfs
debugfs: add debugfs_lookup_and_remove()
driver core: fix driver_set_override() issue with empty strings
Revert "arch_topology: Make cluster topology span at least SMT CPUs"
arch_topology: Make cluster topology span at least SMT CPUs
Merge tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull via Christoph:
- fix a use after free in nvmet (Bart Van Assche)
- fix a use after free when detecting digest errors
(Sagi Grimberg)
- fix regression that causes sporadic TCP requests to time out
(Sagi Grimberg)
- fix two off by ones errors in the nvmet ZNS support
(Dennis Maisenbacher)
- requeue aen after firmware activation (Keith Busch)
- Fix missing request flags in debugfs code (me)
- Partition scan fix (Ming)
* tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
block: add missing request flags to debugfs code
nvme: requeue aen after firmware activation
nvmet: fix mar and mor off-by-one errors
nvme-tcp: fix regression that causes sporadic requests to time out
nvme-tcp: fix UAF when detecting digest errors
nvmet: fix a use-after-free
block: don't add partitions if GD_SUPPRESS_PART_SCAN is set
Merge tag 'io_uring-6.0-2022-09-09' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Removed function that became unused after last week's merge (Jiapeng)
- Two small fixes for kbuf recycling (Pavel)
- Include address copy for zc send for POLLFIRST (Pavel)
- Fix for short IO handling in the normal read/write path (Pavel)
* tag 'io_uring-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
io_uring/rw: fix short rw error handling
io_uring/net: copy addr for zc on POLL_FIRST
io_uring: recycle kbuf recycle on tw requeue
io_uring/kbuf: fix not advancing READV kbuf ring
io_uring/notif: Remove the unused function io_notif_complete()
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Many bug fixes in several drivers:
- Fix misuse of the DMA API in rtrs
- Several irdma issues: hung task due to SQ flushing, incorrect
capability reporting to userspace, improper error handling for MW
corners, touching an uninitialized SGL for during invalidation.
- hns was using the wrong page size limits for the HW, an incorrect
calculation of wqe_shift causing WQE corruption, and mis computed a
timer id.
- Fix a crash in SRP triggered by blktests
- Fix compiler errors by calling virt_to_page() with the proper type
in siw
- Userspace triggerable deadlock in ODP
- mlx5 could use the wrong profile due to some driver loading races,
counters were not working in some device configurations, and a
crash on error unwind"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Report RNR NAK generation in device caps
RDMA/irdma: Use s/g array in post send only when its valid
RDMA/irdma: Return correct WC error for bind operation failure
RDMA/irdma: Return error on MR deregister CQP failure
RDMA/irdma: Report the correct max cqes from query device
MAINTAINERS: Update maintainers of HiSilicon RoCE
RDMA/mlx5: Fix UMR cleanup on error flow of driver init
RDMA/mlx5: Set local port to one when accessing counters
RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profile
IB/core: Fix a nested dead lock as part of ODP flow
RDMA/siw: Pass a pointer to virt_to_page()
RDMA/srp: Set scmnd->result only when scmnd is not NULL
RDMA/hns: Remove the num_qpc_timer variable
RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift
RDMA/hns: Fix supported page size
RDMA/cma: Fix arguments order in net device validation
RDMA/irdma: Fix drain SQ hang with no completion
RDMA/rtrs-srv: Pass the correct number of entries for dma mapped SGL
RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg
Merge tag 'drm-fixes-2022-09-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"From a train in the Irish countryside, regular drm fixes for 6.0-rc5.
This is mostly amdgpu/amdkfd and i915 fixes, then one panfrost, one
ttm and one edid fix. Nothing too major going on. Hopefully a quiet
week next week for LPC.
edid:
- Fix EDID 1.4 range-descriptor parsing
ttm:
- Fix ghost-object bulk moves
i915:
- Fix MIPI sequence block copy from BIOS' table
- Fix PCODE min freq setup when GuC's SLPC is in use
- Implement Workaround for eDP
- Fix has_flat_ccs selection for DG1
* tag 'drm-fixes-2022-09-10' of git://anongit.freedesktop.org/drm/drm:
drm/panfrost: devfreq: set opp to the recommended one to configure regulator
drm/ttm: cleanup the resource of ghost objects after locking them
drm/amdgpu: prevent toc firmware memory leak
drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGE
drm/amdkfd: print address in hex format rather than decimal
drm/amd/display: fix memory leak when using debugfs_lookup()
drm/amd/pm: add missing SetMGpuFanBoostLimitRpm mapping for SMU 13.0.7
drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_header
drm/i915: consider HAS_FLAT_CCS() in needs_ccs_pages
drm/i915: Implement WaEdpLinkRateDataReload
drm/i915/slpc: Let's fix the PCODE min freq table setup for SLPC
drm/i915/bios: Copy the whole MIPI sequence block
drm/ttm: update bulk move object of ghost BO
drm/edid: Handle EDID 1.4 range descriptor h/vfreq offsets
projects / kernel.git / log