Jianxin Xiong [Wed, 14 Oct 2020 16:16:01 +0000 (09:16 -0700)]
dma-buf: Clarify that dma-buf sg lists are page aligned
The dma-buf API have been used under the assumption that the sg lists
returned from dma_buf_map_attachment() are fully page aligned. Lots of
stuff can break otherwise all over the place. Clarify this in the
documentation and add a check when DMA API debug is enabled.
Zwane Mwaikambo [Tue, 13 Oct 2020 05:59:14 +0000 (22:59 -0700)]
drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor()
I observed this when unplugging a DP monitor whilst a computer is asleep
and then waking it up. This left DP chardev nodes still being present on
the filesystem and accessing these device nodes caused an oops because
drm_dp_aux_dev_get_by_minor() assumes a device exists if it is opened.
This can also be reproduced by creating a device node with mknod(1) and
issuing an open(2)
Looking at the caller, checks on the minor are pushed down to
drm_dp_aux_dev_get_by_minor()
static int auxdev_open(struct inode *inode, struct file *file)
{
unsigned int minor = iminor(inode);
struct drm_dp_aux_dev *aux_dev;
aux_dev = drm_dp_aux_dev_get_by_minor(minor); <====
if (!aux_dev)
return -ENODEV;
file->private_data = aux_dev;
return 0;
}
Fixes: 520434106a9f ("drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Zwane Mwaikambo <zwane@yosper.io> Reviewed-by: Lyude Paul <lyude@redhat.com>
[added Cc to stable] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2010122231070.38717@montezuma.home
Novatek NT36672a is a generic DSI IC that drives command and video mode
panels. Add the driver for it.
Right now adding support for some Poco F1 phones that have an LCD panel
from Tianma connected with this IC, with a resolution of 1080x2246 that
operates in DSI video mode.
During testing, Benni Steini <bennisteinir@gmail.com> helped us fix
the reset sequence timing (from 10ms to 20ms), to get the bootanimation
to work on Android.
With current AOSP, we need to increase it to 200ms - this seems to be a
safe high value to avoid a white screen occasionally.
dt-bindings: display: panel: Add bindings for Novatek nt36672a
Novatek nt36672a is a display driver IC that can drive DSI panel. It
is also present in the Tianma video mode panel, which is a FHD+ panel
with a resolution of 1080x2246 and 6.18 inches size. It is found in
some of the Poco F1 phones.
This patch adds the display driver for the IC, with support added for
this tianma fhd video mode panel.
Maxime Ripard [Fri, 9 Oct 2020 07:49:52 +0000 (09:49 +0200)]
MAINTAINERS: Add myself as a maintainer for vc4
Eric isn't working on vc4 anymore and I've been working on it, as well as
merging patches for it, recently so let's make it official so I don't miss
patches.
Kernel test robot reported build errors (undefined references)
that didn't make much sense. After reproducing them, there is also
a Kconfig warning that is the root cause of the build errors, so
fix that Kconfig problem.
Fixes this Kconfig warning:
WARNING: unmet direct dependencies detected for CMA
Depends on [n]: MMU [=n]
Selected by [m]:
- DRM_ASPEED_GFX [=m] && HAS_IOMEM [=y] && DRM [=m] && OF [=y] && (COMPILE_TEST [=y] || ARCH_ASPEED) && HAVE_DMA_CONTIGUOUS [=y]
and these dependent build errors:
(.text+0x10c8c): undefined reference to `start_isolate_page_range'
microblaze-linux-ld: (.text+0x10f14): undefined reference to `test_pages_isolated'
microblaze-linux-ld: (.text+0x10fd0): undefined reference to `undo_isolate_page_range'
Fixes: 5f3de1453f43 ("drm: aspeed: Clean up Kconfig options") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Michal Simek <monstr@monstr.eu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: linux-mm@kvack.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://patchwork.freedesktop.org/patch/msgid/20201011230131.4922-1-rdunlap@infradead.org Signed-off-by: Joel Stanley <joel@jms.id.au>
Jyri Sarha [Sat, 10 Oct 2020 17:00:59 +0000 (20:00 +0300)]
drm/tilcdc: Remove tilcdc_crtc_max_width(), use private data
We already have a private data member for maximum display width so
let's use it and get rid of the redundant tilcdc_crtc_max_width().
The LCDC version probing is moved to before reading the device tree
properties so that the version information is available when private
data maximum width is initialized, if "max-width" property is not
found.
There have suggestions to bake pitch alignment, address alignment,
contiguous memory or other placement (hidden VRAM, GTT/BAR, etc)
constraints into modifiers. Last time this was brought up it seemed
like the consensus was to not allow this. Document this in drm_fourcc.h.
There are several reasons for this.
- Encoding all of these constraints in the modifiers would explode the
search space pretty quickly (we only have 64 bits to work with).
- Modifiers need to be unambiguous: a buffer can only have a single
modifier.
- Modifier users aren't expected to parse modifiers (except drivers).
v2: add paragraph about aliases (Daniel)
v3: fix unrelated changes sent with the patch
v4: disambiguate users between driver and higher-level programs (Brian,
Daniel)
Maxime Ripard [Thu, 8 Oct 2020 12:44:08 +0000 (14:44 +0200)]
drm/atomic: Pass the full state to CRTC atomic enable/disable
If the CRTC driver ever needs to access the full DRM state, it can't do so
at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state
will have cleared the pointer from the struct drm_crtc_state to the struct
drm_atomic_state before calling those hooks.
In order to allow that, let's pass the full DRM state to atomic_enable and
atomic_disable. The conversion was done using the coccinelle script below,
built tested on all the drivers and actually tested on vc4.
Joel Stanley [Wed, 16 Sep 2020 08:34:13 +0000 (18:04 +0930)]
drm/aspeed: Add sysfs for output settings
These settings are used by an ASPEED BMC to determine when the host is
trying to drive the display over PCIe (vga_pw) and to switch the
output between PCIe and the internal graphics device (dac_mux).
The valid values for the dac mux are:
00: VGA mode (default, aka PCIe)
01: Graphics CRT (aka BMC internal graphics, this driver)
10: Pass through mode from video input port A
11: Pass through mode from video input port B
Values for the read-only vga password register are:
1: Host driving the display
0: Host not driving the display
Christian König [Thu, 8 Oct 2020 08:03:22 +0000 (10:03 +0200)]
dma-buf: use struct_size macro
Instead of manually calculating the structure size.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/394252/
Boris Brezillon [Fri, 2 Oct 2020 12:25:06 +0000 (14:25 +0200)]
drm/panfrost: Fix job timeout handling
If more than two jobs end up timeout-ing concurrently, only one of them
(the one attached to the scheduler acquiring the lock) is fully handled.
The other one remains in a dangling state where it's no longer part of
the scheduling queue, but still blocks something in scheduler, leading
to repetitive timeouts when new jobs are queued.
Let's make sure all bad jobs are properly handled by the thread
acquiring the lock.
v3:
- Add Steven's R-b
- Don't take the sched_lock when stopping the schedulers
v2:
- Fix the subject prefix
- Stop the scheduler before returning from panfrost_job_timedout()
- Call cancel_delayed_work_sync() after drm_sched_stop() to make sure
no timeout handlers are in flight when we reset the GPU (Steven Price)
- Make sure we release the reset lock before restarting the
schedulers (Steven Price)
Daniel Vetter [Fri, 25 Sep 2020 08:46:51 +0000 (10:46 +0200)]
drm/atomic: debug output for EBUSY
Hopefully we'll have the drm crash recorder RSN, but meanwhile
compositors would like to know a bit better why they get an EBUSY.
v2: Move misplaced hunk to the right patch (Pekka)
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk> Cc: Simon Ser <contact@emersion.fr> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200925084651.3250104-2-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 25 Sep 2020 08:46:50 +0000 (10:46 +0200)]
drm/atomic: document and enforce rules around "spurious" EBUSY
When doing an atomic modeset with ALLOW_MODESET drivers are allowed to
pull in arbitrary other resources, including CRTCs (e.g. when
reconfiguring global resources).
But in nonblocking mode userspace has then no idea this happened,
which can lead to spurious EBUSY calls, both:
- when that other CRTC is currently busy doing a page_flip the
ALLOW_MODESET commit can fail with an EBUSY
- on the other CRTC a normal atomic flip can fail with EBUSY because
of the additional commit inserted by the kernel without userspace's
knowledge
For blocking commits this isn't a problem, because everyone else will
just block until all the CRTC are reconfigured. Only thing userspace
can notice is the dropped frames without any reason for why frames got
dropped.
Consensus is that we need new uapi to handle this properly, but no one
has any idea what exactly the new uapi should look like. Since this
has been shipping for years already compositors need to deal no matter
what, so as a first step just try to enforce this across drivers
better with some checks.
v2: Add comments and a WARN_ON to enforce this only when allowed - we
don't want to silently convert page flips into blocking plane updates
just because the driver is buggy.
v3: Fix inverted WARN_ON (Pekka).
v4: Drop the uapi changes, only add a WARN_ON for now to enforce some
rules for drivers.
v5: Make the WARNING more informative (Daniel)
v6: Add unconditional debug output for compositor hackers to figure
out what's going on when they get an EBUSY (Daniel)
v7: Fix up old/new_crtc_state confusion for real (Pekka/Ville)
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Daniel Stone <daniels@collabora.com>
References: https://lists.freedesktop.org/archives/dri-devel/2018-July/182281.html
Bugzilla: https://gitlab.freedesktop.org/wayland/weston/issues/24#note_9568 Cc: Daniel Stone <daniel@fooishbar.org> Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk> Cc: Simon Ser <contact@emersion.fr> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200925084651.3250104-1-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 7 Oct 2020 13:30:35 +0000 (15:30 +0200)]
drm/fb-helper: Add locking to sysrq handling
We didn't take the kernel_fb_helper_lock mutex, which protects that
code. While at it, simplify the code
- inline the function (originally shared with kgdb I think)
- drop the error tracking and all the complications
- drop the pointless early out, it served nothing
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201007133036.1541639-1-daniel.vetter@ffwll.ch
Marek Szyprowski [Wed, 30 Sep 2020 11:40:42 +0000 (13:40 +0200)]
drm/bridge: tc358764: restore connector support
This patch restores DRM connector registration in the TC358764 bridge
driver and restores usage of the old drm_panel_* API, thus allows dynamic
panel registration. This fixes panel operation on Exynos5250-based
Arndale board.
This is equivalent to the revert of the following commits: 7f8aeafdd1ff "drm/bridge: tc358764: add drm_panel_bridge support" 18d9053712ff "drm/bridge: tc358764: drop drm_connector_(un)register"
and removal of the calls to drm_panel_attach()/drm_panel_detach(), which
were no-ops and has been removed in meanwhile.
The only usage of dw_hdmi_i2s_ops is to assign its address to the ops
field in the hdmi_codec_pdata struct, which is a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Tom Rix [Sat, 3 Oct 2020 19:39:28 +0000 (12:39 -0700)]
drm/gma500: fix double free of gma_connector
clang static analysis reports this problem:
cdv_intel_dp.c:2101:2: warning: Attempt to free released memory
kfree(gma_connector);
^~~~~~~~~~~~~~~~~~~~
In cdv_intel_dp_init() when the call to cdv_intel_edp_panel_vdd_off()
fails, the handler calls cdv_intel_dp_destroy(connector) which does
the first free of gma_connector. So adjust the goto label and skip
the second free.
Boris Brezillon [Fri, 2 Oct 2020 06:55:18 +0000 (08:55 +0200)]
drm/sched: Avoid infinite waits in the drm_sched_entity_destroy() path
If we don't initialize the entity to idle and the entity is never
scheduled before being destroyed we end up with an infinite wait in the
destroy path.
v2:
- Add Steven's R-b
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/393486/
Gowtham Tammana [Wed, 26 Aug 2020 13:44:09 +0000 (16:44 +0300)]
drm/tidss: Add prepare_fb to the plane helper funcs
drm_gem_fb_prepare_fb() extracts fence and attaches to plane state.
The fence info is needed if implicit fencing is used. Add this as
prepare_fb function pointer to plane helper funcs.
Daniel Vetter [Fri, 2 Oct 2020 07:56:20 +0000 (09:56 +0200)]
drm/atomic: Make the kerneldoc a bit clearer
Crank up the warning a notch and point at the right set of locking
functions for atomic drivers.
Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201002075620.4157591-1-daniel.vetter@ffwll.ch
dma-buf: Use struct dma_buf_map in dma_buf_vunmap() interfaces
This patch updates dma_buf_vunmap() and dma-buf's vunmap callback to
use struct dma_buf_map. The interfaces used to receive a buffer address.
This address is now given in an instance of the structure.
Users of the functions are updated accordingly. This is only an interface
change. It is currently expected that dma-buf memory can be accessed with
system memory load/store operations.
v2:
* include dma-buf-heaps and i915 selftests (kernel test robot)
* initialize cma_obj before using it in drm_gem_cma_free_object()
(kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-4-tzimmermann@suse.de
dma-buf: Use struct dma_buf_map in dma_buf_vmap() interfaces
This patch updates dma_buf_vmap() and dma-buf's vmap callback to use
struct dma_buf_map.
The interfaces used to return a buffer address. This address now gets
stored in an instance of the structure that is given as an additional
argument. The functions return an errno code on errors.
Users of the functions are updated accordingly. This is only an interface
change. It is currently expected that dma-buf memory can be accessed with
system memory load/store operations.
v3:
* update fastrpc driver (kernel test robot)
v2:
* always clear map parameter in dma_buf_vmap() (Daniel)
* include dma-buf-heaps and i915 selftests (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-3-tzimmermann@suse.de
dma-buf: Add struct dma-buf-map for storing struct dma_buf.vaddr_ptr
The new type struct dma_buf_map represents a mapping of dma-buf memory
into kernel space. It contains a flag, is_iomem, that signals users to
access the mapped memory with I/O operations instead of regular loads
and stores.
It was assumed that DMA buffer memory can be accessed with regular load
and store operations. Some architectures, such as sparc64, require the
use of I/O operations to access dma-map buffers that are located in I/O
memory. Providing struct dma_buf_map allows drivers to implement this.
This was specifically a problem when refreshing the graphics framebuffer
on such systems. [1]
As the first step, struct dma_buf stores an instance of struct dma_buf_map
internally. Afterwards, dma-buf's vmap and vunmap interfaces are be
converted. Finally, affected drivers can be fixed.
v3:
* moved documentation into separate patch
* test for NULL pointers with !<ptr>
drm/virtio: implement blob resources: report blob mem to userspace
The stride field has never been used, so repurpose it to be
"blob_mem". This way, userspace can know the memory properties
of the blob if it's passed between userspace processes and
no suitable userspace API exists to transmit that knowledge.
The old transfer ioctls may work on blob resources, and there is no
TRANSFER_BLOB hypercall now for simplicity.
The guest may have a image view on the blob resources such that the
stride is not equal to width * bytes_per_pixel.
For host-only blobs, we can repurpose the transfer ioctls to synchronize
caches as well. For guest-only blobs, these operations are undefined
for now so leave them out.
Also, with seamless Wayland integration between guest/host looking
increasingly attractive, it also makes sense to keep track of
one value for stride.
For upcoming blob resources, userspace can specify that the
resource will be used for cross-device sharing. This is mainly
for exportable blobs that will only shared with the virtgpu
display but not across devices.
SCANOUT_BLOB forwards the DRM framebuffer metadata to the host. The
modifier is intentionally left out -- it may be possible to query
the host for that.
We also assume one blob resource per DRM framebuffer. That too is
an intentional simplification.
This feature was recently added to virtio-gpu, lets make
it userspace queryable. It's an error to use
BLOB_FLAG_USE_CROSS_DEVICE when this feature is not present.
This makes blob resources available to guest userspace. They are needed
for GL4.5, Vulkan and zero-copy virtio-gpu.
For Mesa, blob resources have been tested with Piglit's ARB_buffer_storage
tests and apitraces. Apitraces of GL4.5 games show we're between 70%
to 80% of host performance on Iris, based on a apitrace of a 2013 GL4.5
game:
11.204 FPS (guest)
15.947 FPS (host)
This is still better than the status quo, when said game was unplayable
with Virgl due to an inefficient GL4.3 fallback. But there's still room
for improvement if we want to match HW-assisted virtualization.
For Vulkan, blob resources have been tested with dEQP.vk.memory* and
running Vulkan applications in production with the "Cuttlefish" virtual
Android device. This has been done with Lingfeng Yang's "gfxstream"
Vulkan implementation, which virtualizes Vulkan across many Google
products.
This patch adds a new virtgpu feature that allows directly
mapping host allocated resources.
This is based on virtio shared memory regions, which allows
querying for memory regions using PCI transport. Each shared
memory region has an associated "shmid", the meaning of which
is device specific.
For virtio-gpu, we can define the shared memory region with id
VIRTIO_GPU_SHM_ID_HOST_VISIBLE to be the "host visible memory
region".
The presence of the host visible memory region means the following
hypercalls are supported:
1) VIRTIO_GPU_CMD_RESOURCE_MAP_BLOB
This hypercall tells the host to inject the host resource's
mapping in an offset into virtio-gpu's PCI address space.
This is typically done via KVM_SET_USER_MEMORY_REGION on Linux
hosts.
On success, VIRTIO_GPU_RESP_OK_MAP_INFO is returned, which
specifies the host buffer's caching type and possibly in the
future performance hints about the buffer..
2) VIRTIO_GPU_CMD_RESOURCE_UNMAP_BLOB
This hypercall tells the host to remove the host resource's
mapping from the guest VM.
A blob resource is a container for:
- VIRTIO_GPU_BLOB_MEM_GUEST: a guest memory allocation
(referred to as a "guest-only blob resource")
- VIRTIO_GPU_BLOB_MEM_HOST3D: a host3d memory allocation
(referred to as a "host-only blob resource")
- VIRTIO_GPU_BLOB_MEM_HOST3D_GUEST: a guest + host3d memory allocation
(referred to as a "default blob resource").
The memory properties of the blob resource must be described by
`blob_mem`.
For default and guest only blob resources set, `nents` guest system
pages are assigned to the resource. For default blob resources,
these guest pages are used for transfer operations. Attach/detach is
also possible to allow swap-in/swap-out, but isn't required since it
may not be applicable to future blob mem types
(shared guest/guest vram).
Host allocations depend on whether the 3D is supported. If 3D is not
supported, the only valid field for `blob_mem` is
VIRTIO_GPU_BLOB_MEM_GUEST.
If 3D is supported, the virtio-gpu resource is created from the
context local object identified by the `blob_id`. The actual host
allocation done by the CMD_SUBMIT_3D.
Userspace must specify if the blob resource is intended to be used
for userspace mapping, sharing between virtio-gpu contexts and/or
sharing between virtio devices. This is done via `blob_flags`.
For 3D hosts, both VIRTIO_GPU_CMD_TRANSFER_TO_HOST_3D and
VIRTIO_GPU_CMD_TRANSFER_FROM_HOST_3D may be used to update
the host resource. There is no restriction on the image/buffer
view the guest/host userspace has on the blob resource.
VIRTIO_GPU_CMD_SET_SCANOUT_BLOB / VIRTIO_GPU_CMD_RESOURCE_FLUSH may
be used with blob resources as well. The modifier is intentionally
left out of SCANOUT_BLOB, and auxilary blobs are also left out
as a simplification.
The use case for blob resources is zero-copy, needed for coherent
memory in virglrenderer. Host only blob resources are not mappable
without the feature described in the next patch, but are shareable.
Future work:
- Emulated coherent `blob_mem` type for QEMU/vhost-user
- A `blob_mem` type for guest-only resources imported in
cache-coherent FOSS GPU/display drivers.
- Display integration involving the blob model using seamless
Wayland windows.
Paul Cercueil [Sat, 26 Sep 2020 17:05:01 +0000 (19:05 +0200)]
drm/ingenic: Add support for 24-bit modes
Starting from the JZ4725B SoC, the primary and overlay planes support
24-bit pixel modes (8 bits per color component, without dummy byte).
Add support for these in the ingenic-drm driver.
Paul Cercueil [Sat, 26 Sep 2020 17:05:00 +0000 (19:05 +0200)]
drm/ingenic: Add support for 30-bit modes
Starting from the JZ4760 SoC, the primary and overlay planes support
30-bit pixel modes (10 bits per color component). Add support for these
in the ingenic-drm driver.
Paul Cercueil [Sat, 26 Sep 2020 17:04:58 +0000 (19:04 +0200)]
drm/ingenic: Support handling different pixel formats in F0/F1 planes
Until now the ingenic-drm driver supported the same pixel formats on the
F0 and F1 planes, and across all SoCs. However, the F0 plane does support
paletted 8bpp, while the F1 plane doesn't.
Furthermore, the three SoCs currently supported all have different pixel
formats available; 24bpp was added in JZ4725B, 30bpp was added in
JZ4770.
Prepare the inclusion of paletted 8bpp, 24bpp and 30bpp support by
having separate pixel format lists for F0 and F1 planes.
Paul Cercueil [Sat, 26 Sep 2020 17:04:57 +0000 (19:04 +0200)]
drm/ingenic: Alloc F0 and F1 DMA descriptors at once
Instead of calling dmam_alloc_coherent() once for each 4-bit DMA
hardware descriptor, we can have them both in a physical memory page, as
long as they are aligned to 16 bytes. This reduces memory consumption,
and will make it easier to add more DMA descriptors in the future.
Note that the old code would not create the F0 descriptor on SoCs that
don't support multiple planes. We don't care, because:
- we don't use more memory by allocating two descriptors instead of a
single one;
- the only SoC that does not support multiple planes (JZ4740) still has
two independent DMA channels, for an unknown reason.
Paul Cercueil [Sat, 26 Sep 2020 17:04:56 +0000 (19:04 +0200)]
drm/ingenic: Add support for reserved memory
Add support for static memory reserved from Device Tree. Since we're
using GEM buffers backed by CMA, it is interesting to have an option to
specify the CMA area where the GEM buffers will be allocated.
v2: Don't abort probe if reserved memory cannot be obtained. The driver
will still work fine provided the kernel configuration is sane.
Paul Cercueil [Sat, 26 Sep 2020 17:04:55 +0000 (19:04 +0200)]
drm/ingenic: Reset pixclock rate when parent clock rate changes
Old Ingenic SoCs can overclock very well, up to +50% of their nominal
clock rate, whithout requiring overvolting or anything like that, just
by changing the rate of the main PLL. Unfortunately, all clocks on the
system are derived from that PLL, and when the PLL rate is updated, so
is our pixel clock.
To counter that issue, we make sure that the panel is in VBLANK before
the rate change happens, and we will then re-set the pixel clock rate
afterwards, once the PLL has been changed, to be as close as possible to
the pixel rate requested by the encoder.
This is one of the last users of compat_alloc_user_space()
and copy_in_user(). The actual handler is implemented in the
same file and could be shared, but as I couldn't test this
properly I leave the native case alone and just make a straight
copy of it for the compat case, with a minimum set of
modifications.
No driver implements FBIOSCURSOR, so this function has no purpose
and can be removed. Apparently it was added in linux-2.1.44 to handle
compatibility for drivers/sbus/char/sunfb.c but lost its purpose when
that driver got rewritten in linux-2.5.63.
Most drivers that use VRAM helpers have only a few MiB of framebuffer
memory available. To reduce fragmentation, new BOs are now put into
system memory by default. Only pin operations are allowed to move BOs
into VRAM.
drm/vram-helper: Set object function iff they are not provided by driver
Don't override the GEM object functions unconditionally. If the driver
sets the GEM functions, VRAM helpers will not set them. The idea has been
taken from SHMEM helpers.
v2:
* updated the commit message (Sam)
* document the new feature for drm_gem_vram_create()
projects / kernel.git / log