Alex Estrin [Mon, 9 Oct 2017 19:38:33 +0000 (12:38 -0700)]
IB/rdmavt: Don't wait for resources in QP reset
Per the IBTA spec, QP destroy shall fail if the QP is attached
to multicast groups, although the spec is silent on modify_qp
to reset state. It implies that ULP must deregister QP from
all mcast groups for destroy to succeed.
The faulty patch "IB/ipoib: Update broadcast object if PKey value
was changed in index 0" exposed two issues in rdmavt:
1. Rvt QP reset waits for qp references to go to zero.
This will hang if QP is attached to multicast groups.
2. The mcast group detach will fail for a QP in reset state
therefore preventing ULP from correcting the issue.
This patch moves the reference count wait to the the destroy QP
path and allows a QP mcast detach to work in the reset state.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Kaike Wan [Mon, 9 Oct 2017 19:38:26 +0000 (12:38 -0700)]
IB/hfi1: Set hdr_type when tx req is allocated
Setting the protocol type should be part of initializing the tx request.
For UC and RC, the current protocol type is part of the qp priv structure.
For ud requests, it needs to be adjusted dynamically, based on the AV
posted with the WQE. This patch will simplify the initialization of the
tx request.
Fixes: 241e2ec91727 ("IB/hfi1: Add 16B RC/UC support") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Don Hiatt [Mon, 9 Oct 2017 19:38:19 +0000 (12:38 -0700)]
IB/hfi1: Eliminate allocation while atomic
The PIO trailing buffer was being dynamically allocated
but the kcalloc return value was not being checked. Further,
the GFP_KERNEL was being used even though the send engine
might be called with interrupts disabled.
Since the maximum size of the trailing buffer is only 12
bytes (CRC = 4, LT = 1, Pad = 0 to 7 bytes) just statically
allocate the buffer, remove the alloc entirely and share it
with the SDMA engine by making it global.
Reported-by: Leon Romanovsky <leon@kernel.org> Fixes: e3d8271c629a ("IB/hfi1: Enhance PIO/SDMA send for 16B") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Don Hiatt [Mon, 9 Oct 2017 19:38:12 +0000 (12:38 -0700)]
IB/hfi1: Mask out A bit from psn trace
The trace logic prior to the fixes below used to mask the
A bit from the psn. It now mistakenly displays the A bit,
which is already displayed separately.
Fix by adding the appropriate mask to the psn tracing.
Fixes: 26392bbfa926 ("IB/hfi1: Separate input/output header tracing") Fixes: f71a3bfac542 ("IB/hfi1: Add 16B trace support") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Grzegorz Morys [Mon, 9 Oct 2017 19:38:04 +0000 (12:38 -0700)]
IB/hfi1: Correct unnecessary acquisition of HW mutex
Avoid acquiring already acquired hardware mutex and releasing
the unacquired one as these are redundant operations.
Add printouts for such situations to help detect potential errors
within the driver.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Grzegorz Morys <grzegorz.morys@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/hfi1: Allow meta version 4 for platform configuration
Parsing of platform configuration format 4 will fail on meta
version check. Allow meta version 4 during parsing.
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Jan Sokolowski [Mon, 9 Oct 2017 20:08:28 +0000 (13:08 -0700)]
IB/hfi1: Fix serdes loopback set-up
Change serdes mode setting to use MISC_CONFIG_BITS in
VERIFY_CAP_LOCAL_LINK_WIDTH register. This method of
setting up serdes loopback is universally compatible
across all firmware versions.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Wed, 11 Oct 2017 17:49:20 +0000 (10:49 -0700)]
IB/qib: Remove remaining code related to writing the EEPROM
Due to removal of the EEPROM writing code, the qib_inc_eeprom_err()
macro became a no-op. Remove the code that calls it. Since that
change removes all code that reads the eep_st_masks array, also
remove the code that updates that array and the array itself.
References: commit 02a7bd64011e ("IB/qib: Do not write EEPROM") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Marciniszyn <infinipath@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Wed, 11 Oct 2017 17:49:08 +0000 (10:49 -0700)]
IB/mlx5: Remove a set-but-not-used variable
References: commit 2bba2d8aa0ce ("IB/mlx5: Use blue flame register allocator in mlx5_ib") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Wed, 11 Oct 2017 17:48:59 +0000 (10:48 -0700)]
IB/hfi1: Define hfi1_handle_cnp_tbl[] once
Move the hfi1_handle_cnp_tbl[] from a header file to a .c file
such that only one copy ends up in the hfi1 kernel module. This
patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Wed, 11 Oct 2017 17:48:45 +0000 (10:48 -0700)]
RDMA/cma: Avoid triggering undefined behavior
According to the C standard the behavior of computations with
integer operands is as follows:
* A computation involving unsigned operands can never overflow,
because a result that cannot be represented by the resulting
unsigned integer type is reduced modulo the number that is one
greater than the largest value that can be represented by the
resulting type.
* The behavior for signed integer underflow and overflow is
undefined.
Hence only use unsigned integers when checking for integer
overflow.
This patch is what I came up with after having analyzed the
following smatch warnings:
Bart Van Assche [Wed, 11 Oct 2017 17:48:43 +0000 (10:48 -0700)]
IB/core: Fix endianness annotation in rdma_is_multicast_addr()
Since ipv4_addr is a big endian 32-bit number, annotate it as such.
Fixes: commit cdec8f5d775d ("IB/core: Set RoCEv2 MGID according to spec") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Colin Ian King [Mon, 9 Oct 2017 16:12:00 +0000 (17:12 +0100)]
IB/core: remove redundant check on prot_sg_cnt
prot_sg_cnt cannot be zero as a previous check on ret (from which
prot_sg_cnt is assigned) returns -ENOMEM if is it zero. Since
it cannot be zero we can simplify the code by removing the non
-zero check on prot_sg_cnt and redundant else statement.
Detected by CoverityScan, COD#1357188 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Fri, 6 Oct 2017 20:06:17 +0000 (13:06 -0700)]
IB/core: Simplify sa_path_set_[sd]lid() calls
Instead of making every caller convert the second argument of
sa_path_set_slid() and sa_path_set_dlid() to big endian format,
make these two functions accept LIDs in CPU endian format.
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Cc: Don Hiatt <don.hiatt@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Arnd Bergmann [Fri, 6 Oct 2017 07:13:46 +0000 (09:13 +0200)]
infiniband: add MMU dependency for user_mem
The infiniband subsystem causes a link failure when the umem
driver is built on MMU-less systems:
mm/mmu_notifier.o: In function `do_mmu_notifier_register':
mmu_notifier.c:(.text+0x32): undefined reference to `mm_take_all_locks'
drivers/infiniband/core/umem.o: In function `ib_umem_get':
umem.c:(.text+0x132): undefined reference to `can_do_mlock'
drivers/infiniband/core/umem_odp.o: In function `ib_umem_odp_map_dma_pages':
umem_odp.c:(.text+0x766): undefined reference to `get_user_pages_remote'
This bug has existed for a while but only become apparent in ARM
randconfig builds when the dependency on PCI was lifted, as none
of the ARM-NOMMU targets support PCI at the moment.
We could probably get the umem driver to build by providing an
alternative implementation 'can_do_mlock()' that returns false
on NOMMU-systems, but then we'd still have a problem with the
mmu-notifiers required by CONFIG_INFINIBAND_ON_DEMAND_PAGING,
so simply forbidding umem with NOMMU seems like the simplest
workaround.
Fixes: dda35c0a7932 ("IB: Move PCI dependency from root KConfig to HW's KConfigs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Mon, 9 Oct 2017 13:11:32 +0000 (09:11 -0400)]
IB/rxe: put the pool on allocation failure
If the allocation of elem fails, it is not sufficient to simply check
for NULL and return. We need to also put our reference on the pool or
else we will leave the pool with a permanent ref count and we will never
be able to free it.
Fixes: 68833144b0aa ("IB/rxe: check for allocation failure on elem") Suggested-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Colin Ian King [Fri, 8 Sep 2017 14:37:45 +0000 (15:37 +0100)]
IB/rxe: check for allocation failure on elem
The allocation for elem may fail (especially because we're using
GFP_ATOMIC) so best to check for a null return. This fixes a potential
null pointer dereference when assigning elem->pool.
Detected by CoverityScan CID#1357507 ("Dereference null return value")
Fixes: c4397c211d7d ("Soft RoCE driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Don Hiatt [Mon, 2 Oct 2017 18:04:55 +0000 (11:04 -0700)]
IB/hfi1: Do not warn on lid conversions for OPA
On OPA devices opa_local_smp_check will receive 32Bit LIDs when the LID
is Extended. In such cases, it is okay to lose the upper 16 bits of the
LID as this information is obtained elsewhere. Do not issue a warning
when calling ib_lid_cpu16() in this case by masking out the upper 16Bits.
Don Hiatt [Mon, 2 Oct 2017 18:04:48 +0000 (11:04 -0700)]
IB/core: Do not warn on lid conversions for OPA
On OPA devices the user_mad recv_handler can receive 32Bit LIDs
(e.g. OPA_PERMISSIVE_LID) and it is okay to lose the upper 16 bits
of the LID as this information is obtained elsewhere. Do not issue
a warning when calling ib_lid_be16() in this case by masking out
the upper 16Bits.
IB/rdmavt: Correct issues with read-mostly and send size cache lines
The s_ahgpsn was incorrectly placed in the read-mostly section of the QP
and the s_curr_size and s_hdrwords are oversized. The misplaced
s_ahgpsn will cause the read-mostly cachelines to thrash.
Place s_ahgpsn in the send side cache lines and correctly size and
s_hdrwords and s_cur_size to keep the send side cachelines at the same
size.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Don Hiatt [Mon, 2 Oct 2017 18:04:33 +0000 (11:04 -0700)]
IB/core: Use __be32 for LIDs in opa_is_extended_lid
The LIDs passed to opa_extended_lid are in __be32 format,
change function signature accordingly.
This fixes the following sparse warnings:
drivers/infiniband/core/cm.c:1181:60: warning: incorrect type in
argument 1 (different ba
drivers/infiniband/core/cm.c:1182:60: warning: incorrect type in
argument 2 (different ba
drivers/infiniband/core/cm.c:1242:68: warning: incorrect type in
argument 1 (different ba
drivers/infiniband/core/cm.c:1243:68: warning: incorrect type in
argument 2 (different ba
drivers/infiniband/core/cm.c:2922:66: warning: incorrect type in
argument 1 (different ba
drivers/infiniband/core/cm.c:2923:66: warning: incorrect type in
argument 2 (different ba
include/rdma/opa_addr.h:102:14: warning: cast to restricted __be32
Fixes: a7a15bfdc245 ("IB/CM: Add OPA Path record support to CM") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/hfi1: Prevent LNI out of sync by resetting host interface version
When the link is disabled and re-enabled, the host version bit is not
set again, so the firmware behaves as though it’s interacting with an
old driver. This causes LNI to get out of sync. The host version bit
needs to be set at load_8051_firmware() and _dc_start(). Currently, it's
only set at load_8051_firmware().
Create a common function to set the bit with the intent to make the code
more maintainable in the future, set the host version bit at _dc_start()
and modify the 8051 command API to prevent a deadlock as _dc_start() is
already holding the dc8051 lock.
Fixes: 79186686a226 ("IB/hfi1: Always perform offline transition") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Mon, 2 Oct 2017 18:04:19 +0000 (11:04 -0700)]
IB/hfi1: Fix incorrect available receive user context count
The addition of the VNIC contexts to num_rcv_contexts changes the
meaning of the sysfs value nctxts from available user contexts, to
user contexts + reserved VNIC contexts.
User applications that use nctxts are now broken.
Update the calculation so that VNIC contexts are used only if there are
hardware contexts available, and do not silently affect nctxts.
Update code to use the calculated VNIC context number.
Update the sysfs value nctxts to be available user contexts only.
Fixes: 5ef2f6bf586b ("IB/hfi1: Virtual Network Interface Controller (VNIC) HW support") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Niranjana Vishwanathapura <Niranjana.Vishwanathapura@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: <Stable@vger.kernel.org> #v4.12+ Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/hfi1: Add parsing for platform configuration format version 4
Platform configuration format version 4, that didn't use the file
size field, is not parsed by the host driver. Only version 5 is
supported. Add logic in parsing procedure to determine what format
is being used and allow to read data from version 4 files.
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Mustafa Ismail [Tue, 3 Oct 2017 16:11:47 +0000 (11:11 -0500)]
i40iw: Do not generate CQE for RTR on QP flush
If RTR WQE is posted and QP is flushed, a CQE is
incorrectly generated for the RTR WQE. Add code
to look for the RTR and not generate a CQE when
QP is flushed.
Fixes: ab0ada4a69ba ("i40iw: user kernel shared files") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
i40iw: Do not retransmit MPA request after it is ACKed
The ACK packets for an MPA request are ignored and
the MPA request is retransmitted if the MPA reply
is late or missing. Fix this by checking ack_rcvd
variable before retransmitting a packet.
Colin Ian King [Fri, 29 Sep 2017 20:13:08 +0000 (21:13 +0100)]
RDMA/hns: return 0 rather than return a garbage status value
For the case where hr_qp->state == IB_QPS_RESET, an uninitialized
value in ret is being returned by function hns_roce_v2_query_qp.
Fix this by setting ret to 0 for this specific return condition.
Detected by CoverityScan, CID#1457203 ("Unitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Lijun Ou [Fri, 29 Sep 2017 15:10:14 +0000 (23:10 +0800)]
RDMA/hns: Fix calltrace for sleeping in atomic
We replace usleep_range that was excessively long anyway with udelay
to avoid using usleep_range function in spin_lock_bh spin region,
thereby avoiding this calltrace:
After the loop in hns_roce_v1_mr_free_work_fn function, it is possible that
all qps will have been freed (in which case ne will be 0). If that
happens, then later in the function when we dereference hr_qp we will
get an exception. Check ne is not 0 to make sure we actually have an
hr_qp left to work on.
This patch fixes the smatch error as below:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1009 hns_roce_v1_mr_free_work_fn()
error: we previously assumed 'hr_qp' could be null
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
When lp_qp_work is NULL, we should return ENOMEM. In order to do so,
we had to make some upper layer functions return a value instead
of being void type so we can propagate the error up the stack.
This patch fixes the smatch error as below:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:918 hns_roce_v1_recreate_lp_qp()
error: potential null dereference 'lp_qp_work'. (kzalloc returns null)
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Lijun Ou [Fri, 29 Sep 2017 15:10:08 +0000 (23:10 +0800)]
RDMA/hns: Refactor code for readability
Put the code for checking the send doorbell status into a
separate function and call it from check_qp_db_process_status
to improve indenting and readability.
It fixes the warning from static checker:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:3562 check_qp_db_process_status()
warn: inconsistent indenting.
Fixes: 98f5af08babe ("IB/hns: Fix for checkpatch.pl comment style) Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Tue, 26 Sep 2017 20:13:17 +0000 (13:13 -0700)]
iw_cxgb4: add referencing to wait objects
For messages sent from the host to fw that solicit a reply from fw,
the c4iw_wr_wait struct pointer is passed in the host->fw message, and
included in the fw->host fw6_msg reply. This allows the sender to wait
until the reply is received, and the code processing the ingress reply
to wake up the sender.
If c4iw_wait_for_reply() times out, however, we need to keep the
c4iw_wr_wait object around in case the reply eventually does arrive.
Otherwise we have touch-after-free bugs in the wake_up paths.
This was hit due to a bad kernel driver that blocked ingress processing
of cxgb4 for a long time, causing iw_cxgb4 timeouts, but eventually
resuming ingress processing and thus hitting the touch-after-free bug.
So I want to fix iw_cxgb4 such that we'll at least keep the wait object
around until the reply comes. If it never comes we leak a small amount of
memory, but if it does come late, we won't potentially crash the system.
So add a kref struct in the c4iw_wr_wait struct, and take a reference
before sending a message to FW that will generate a FW6 reply. And remove
the reference (and potentially free the wait object) when the reply
is processed.
The ep code also uses the wr_wait for non FW6 CPL messages and doesn't
embed the c4iw_wr_wait object in the message sent to firmware. So for
those cases we add c4iw_wake_up_noref().
The mr/mw, cq, and qp object create/destroy paths do need this reference
logic. For these paths, c4iw_ref_send_wait() is introduced to take the
wr_wait reference, send the msg to fw, and then wait for the reply.
So going forward, iw_cxgb4 either uses c4iw_ofld_send(),
c4iw_wait_for_reply() and c4iw_wake_up_noref() like is done in the some
of the endpoint logic, or c4iw_ref_send_wait() and c4iw_wake_up_deref()
(formerly c4iw_wake_up()) when sending messages with the c4iw_wr_wait
object pointer embedded in the message and resulting FW6 reply.
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Colin Ian King [Fri, 29 Sep 2017 13:52:27 +0000 (14:52 +0100)]
RDMA/hns: remove redundant assignment to variable j
Variable j is being assigned to loop_j and then later being
assigned to a new value in for loops. The first initialization
is therefore redundant and can be removed.
Cleans up clang warning:
warning: Value stored to 'j' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Colin Ian King [Fri, 29 Sep 2017 13:16:01 +0000 (14:16 +0100)]
RDMA/hns: make various function static, fixes warnings
The functions hns_roce_table_mhop_get, hns_roce_table_mhop_put,
hns_roce_cleanup_mhop_hem_table, hns_roce_v1_post_mbox,
hns_roce_cmq_setup_basic_desc, hns_roce_cmq_send,
hns_roce_cmq_query_hw_info are all local to the source and do
not need to be in global scope, so make them static.
Cleans up sparse warnings:
symbol 'hns_roce_table_mhop_get' was not declared. Should it be static?
symbol 'hns_roce_table_mhop_put' was not declared. Should it be static?
symbol 'hns_roce_cleanup_mhop_hem_table' was not declared. Should it be
static?
symbol 'hns_roce_v1_post_mbox' was not declared. Should it be static?
symbol 'hns_roce_cmq_setup_basic_desc' was not declared. Should it be
static?
symbol 'hns_roce_cmq_send' was not declared. Should it be static?
symbol 'hns_roce_cmq_query_hw_info' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Tue, 26 Sep 2017 14:04:42 +0000 (07:04 -0700)]
IB/hfi1: Refactor reset_ctxt() IOCTL
The IOCTL is a bit unwieldy. Refactor reset_ctxt() to be a bit more
manageable.
Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Tue, 26 Sep 2017 14:04:35 +0000 (07:04 -0700)]
IB/hfi1: Refactor get_user() IOCTLs
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Refactor _RECV_CTRL, _POLL_TYPE, _ACK_EVENT and _SET_PKEY
IOCTLs to a common pattern.
Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Refactor _TID_INVAL_READ IOCTLs.
Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Tue, 26 Sep 2017 14:04:22 +0000 (07:04 -0700)]
IB/hfi1: Refactor hfi_user_exp_rcv_clear() IOCTLs
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Refactor the _TID_FREE IOCTL.
Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Tue, 26 Sep 2017 14:04:16 +0000 (07:04 -0700)]
IB/hfi1: Refactor hfi_user_exp_rcv_setup() IOCTL
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Refactor the _TID_UPDATE IOCTL.
Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Tue, 26 Sep 2017 14:04:10 +0000 (07:04 -0700)]
IB/hfi1: Refactor get_base_info
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
projects / kernel.git / log