Jeff Daly [Thu, 14 Apr 2022 20:21:04 +0000 (16:21 -0400)]
ixgbe: Fix module_param allow_unsupported_sfp type
The module_param allow_unsupported_sfp should be a boolean to match the
type in the ixgbe_hw struct.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Vladimir Oltean [Tue, 3 May 2022 12:01:50 +0000 (15:01 +0300)]
net: mscc: ocelot: don't use magic numbers for OCELOT_POLICER_DISCARD
OCELOT_POLICER_DISCARD helps "kill dropped packets dead" since a
PERMIT/DENY mask mode with a port mask of 0 isn't enough to stop the CPU
port from receiving packets removed from the forwarding path.
The hardcoded initialization done for it in ocelot_vcap_init() is
confusing. All we need from it is to have a rate and a burst size of 0.
Reuse qos_policer_conf_set() for that purpose.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 3 May 2022 12:01:49 +0000 (15:01 +0300)]
net: mscc: ocelot: drop port argument from qos_policer_conf_set
The "port" argument is used for nothing else except printing on the
error path. Print errors on behalf of the policer index, which is less
confusing anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 3 May 2022 12:01:48 +0000 (15:01 +0300)]
net: mscc: ocelot: use list_for_each_entry in ocelot_vcap_filter_add_to_block
Unify the code paths for adding to an empty list and to a list with
elements by keeping a "pos" list_head element that indicates where to
insert. Initialize "pos" with the list head itself in case
list_for_each_entry() doesn't iterate over any element.
Note that list_for_each_safe() isn't needed because no element is
removed from the list while iterating.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vasily Averin [Mon, 2 May 2022 12:15:51 +0000 (15:15 +0300)]
memcg: accounting for objects allocated for new netdevice
Creating a new netdevice allocates at least ~50Kb of memory for various
kernel objects, but only ~5Kb of them are accounted to memcg. As a result,
creating an unlimited number of netdevice inside a memcg-limited container
does not fall within memcg restrictions, consumes a significant part
of the host's memory, can cause global OOM and lead to random kills of
host processes.
The main consumers of non-accounted memory are:
~10Kb 80+ kernfs nodes
~6Kb ipv6_add_dev() allocations
6Kb __register_sysctl_table() allocations
4Kb neigh_sysctl_register() allocations
4Kb __devinet_sysctl_register() allocations
4Kb __addrconf_sysctl_register() allocations
Accounting of these objects allows to increase the share of memcg-related
memory up to 60-70% (~38Kb accounted vs ~54Kb total for dummy netdevice
on typical VM with default Fedora 35 kernel) and this should be enough
to somehow protect the host from misuse inside container.
Other related objects are quite small and may not be taken into account
to minimize the expected performance degradation.
It should be separately mentonied ~300 bytes of percpu allocation
of struct ipstats_mib in snmp6_alloc_dev(), on huge multi-cpu nodes
it can become the main consumer of memory.
This patch does not enables kernfs accounting as it affects
other parts of the kernel and should be discussed separately.
However, even without kernfs, this patch significantly improves the
current situation and allows to take into account more than half
of all netdevice allocations.
David S. Miller [Wed, 4 May 2022 10:21:33 +0000 (11:21 +0100)]
Merge branch 'mlxsw-updates'
Ido Schimmel says:
====================
mlxsw: Various updates
Patches #1-#3 add missing topology diagrams in selftests and perform
small cleanups.
Patches #4-#5 make small adjustments in QoS configuration. See detailed
description in the commit messages.
Patches #6-#8 reduce the number of background EMAD transactions. The
driver periodically queries the device (via EMAD transactions) about
updates that cannot happen in certain situations. This can negatively
impact the latency of time critical transactions, as the device is busy
processing other transactions.
Before:
# perf stat -a -e devlink:devlink_hwmsg -- sleep 10
Ido Schimmel [Wed, 4 May 2022 06:29:09 +0000 (09:29 +0300)]
mlxsw: spectrum_router: Only query neighbour activity when necessary
The driver periodically queries the device for activity of neighbour
entries in order to report it to the kernel's neighbour table.
Avoid unnecessary activity query when no neighbours are installed. Use
an atomic variable to track the number of neighbours, as it is read
without any locks.
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 4 May 2022 06:29:08 +0000 (09:29 +0300)]
mlxsw: spectrum_switchdev: Only query FDB notifications when necessary
The driver periodically queries the device for FDB notifications (e.g.,
learned, aged-out) in order to update the bridge driver. These
notifications can only be generated when bridges are offloaded to the
device.
Avoid unnecessary queries by starting to query upon installation of the
first bridge and stop querying upon removal of the last bridge.
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Wed, 4 May 2022 06:29:06 +0000 (09:29 +0300)]
mlxsw: Treat LLDP packets as control
When trapping packets for on-CPU processing, Spectrum machines
differentiate between control and non-control traps. Traffic trapped
through non-control traps is treated as data and kept in shared buffer in
pools 0-4. Traffic trapped through control traps is kept in the dedicated
control buffer 9. The advantage of marking traps as control is that
pressure in the data plane does not prevent the control traffic to be
processed.
When the LLDP trap was introduced, it was marked as a control trap. But
then in commit 9418ff8b1952 ("mlxsw: spectrum: PTP: Hook into packet
receive path"), PTP traps were introduced. Because Ethernet-encapsulated
PTP packets look to the Spectrum-1 ASIC as LLDP traffic and are trapped
under the LLDP trap, this trap was reconfigured as non-control, in sync
with the PTP traps.
There is however no requirement that PTP traffic be handled as data.
Besides, the usual encapsulation for PTP traffic is UDP, not bare Ethernet,
and that is in deployments that even need PTP, which is far less common
than LLDP. This is reflected by the default policer, which was not bumped
up to the 19Kpps / 24Kpps that is the expected load of a PTP-enabled
Spectrum-1 switch.
Marking of LLDP trap as non-control was therefore probably misguided. In
this patch, change it back to control.
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Wed, 4 May 2022 06:29:05 +0000 (09:29 +0300)]
mlxsw: spectrum_dcb: Do not warn about priority changes
The idea behind the warnings is that the user would get warned in case when
more than one priority is configured for a given DSCP value on a netdevice.
The warning is currently wrong, because dcb_ieee_getapp_mask() returns
the first matching entry, not all of them, and the warning will then claim
that some priority is "current", when in fact it is not.
But more importantly, the warning is misleading in general. Consider the
following commands:
# dcb app flush dev swp19 dscp-prio
# dcb app add dev swp19 dscp-prio 24:3
# dcb app replace dev swp19 dscp-prio 24:2
The last command will issue the following warning:
mlxsw_spectrum3 0000:07:00.0 swp19: Ignoring new priority 2 for DSCP 24 in favor of current value of 3
The reason is that the "replace" command works by first adding the new
value, and then removing all old values. This is the only way to make the
replacement without causing the traffic to be prioritized to whatever the
chip defaults to. The warning is issued in response to adding the new
priority, and then no warning is shown when the old priority is removed.
The upshot is that the canonical way to change traffic prioritization
always produces a warning about ignoring the new priority, but what gets
configured is in fact what the user intended.
An option to just emit warning every time that the prioritization changes
just to make it clear that it happened is obviously unsatisfactory.
Therefore, in this patch, remove the warnings.
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Wed, 4 May 2022 06:29:04 +0000 (09:29 +0300)]
selftests: router.sh: Add a diagram
It is customary for selftests to have a comment with a topology diagram,
which serves to illustrate the situation in which the test is done. This
selftest lacks it. Add it.
Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Wed, 4 May 2022 06:29:03 +0000 (09:29 +0300)]
selftests: router_vid_1: Add a diagram, fix coding style
It is customary for selftests to have a comment with a topology diagram,
which serves to illustrate the situation in which the test is done. This
selftest lacks it. Add it.
While at it, fix the list of tests so that the test names are enumerated
one at a line.
Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Wed, 4 May 2022 06:29:02 +0000 (09:29 +0300)]
selftests: mlxsw: bail_on_lldpad before installing the cleanup trap
A number of mlxsw-specific QoS tests use manual QoS DCB management. As
such, they need to make sure lldpad is not running, because it would
override the configuration the test has applied using other tools. To that
end, these selftests invoke the bail_on_lldpad() helper, which terminates
the selftest if th lldpad is running.
Some of these tests however first install the bash exit trap, which invokes
a cleanup() at the test exit. If bail_on_lldpad() has terminated the script
even before the setup part was run, the cleanup part will be very confused.
Therefore make sure bail_on_lldpad() is invoked before the cleanup is
registered.
While there are still edge cases where the user terminates the script
before the setup was fully done, this takes care of a common situation
where the cleanup would be invoked in an inconsistent state.
Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 4 May 2022 10:18:08 +0000 (11:18 +0100)]
Merge branch 'sfc-Siena-subdir'
Martin Habets says:
====================
sfc: Move Siena into a separate subdirectory
The Siena NICs (SFN5000 and SFN6000 series) went EOL in November 2021.
Most of these adapters have been remove from our test labs, and testing
has been reduced to a minimum.
This patch series creates a separate kernel module for the Siena architecture,
analogous to what was done for Falcon some years ago.
This reduces our maintenance for the sfc.ko module, and allows us to
enhance the EF10 and EF100 drivers without the risk of breaking Siena NICs.
After this series further enhancements are needed to differentiate the
new kernel module from sfc.ko, and the Siena code can be removed from sfc.ko.
Thes will be posted as a small follow-up series.
The Siena module is not built by default, but can be enabled
using Kconfig option SFC_SIENA. This will create module sfc-siena.ko.
Patches
Patch 1 disables the Siena code in the sfc.ko module.
Patches 2-6 establish the code base for the Siena driver.
Patches 7-12 ensure the allyesconfig build succeeds.
Patch 13 adds the basic Siena module.
I do not expect patch 2 through 5 to be reviewed, they are FYI only.
No checkpatch issues were resolved as part of these, but they
were fixed in the subsequent patches.
Testing
Various build tests were done such as allyesconfig, W=1 and sparse.
The new sfc-siena.ko and sfc.ko modules were tested on a machine with both
these NICs in them, and several tests were run on both drivers.
Martin
---
v3:
- Fix build errors after rebase.
v2:
- Split up patch that copies existing files.
- Only copy a subset of mcdi_pcol.h.
- Use --find-copies-harder as suggested by Benjamin Poirier.
- Merge several patches for the allyesconfig build into larger ones.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 4 May 2022 09:53:00 +0000 (10:53 +0100)]
Merge tag 'mlx5-updates-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2022-05-03
Leon Romanovsky Says:
=====================
Extra IPsec cleanup
After FPGA IPsec removal, we can go further and make sure that flow
steering logic is aligned to mlx5_core standard together with deep
cleaning of whole IPsec path.
=====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 4 May 2022 09:49:32 +0000 (10:49 +0100)]
Merge branch 'mptcp-pathmanager-api'
Mat Martineau says:
====================
mptcp: Userspace path manager API
Userspace path managers (PMs) make use of generic netlink MPTCP events
and commands to control addition and removal of MPTCP subflows on an
existing MPTCP connection. The path manager events have already been
upstream for a while, and this patch series adds four netlink commands
for userspace:
* MPTCP_PM_CMD_ANNOUNCE: advertise an address that's available for
additional subflow connections.
* MPTCP_PM_CMD_REMOVE: revoke an advertisement
* MPTCP_PM_CMD_SUBFLOW_CREATE: initiate a new subflow on an existing MPTCP
connection
* MPTCP_PM_CMD_SUBFLOW_DESTROY: close a subflow on an existing MPTCP
connection
Userspace path managers, such as mptcpd, can be more easily customized
for different devices. The in-kernel path manager remains available to
handle server use cases.
Patches 1-3 update common path manager code (used by both in-kernel and
userspace PMs)
Patches 4, 6, and 8 implement the new generic netlink commands.
Patches 5, 7, and 9-13 add self test support and test cases for the new
path manager commands.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:39:01 +0000 (19:39 -0700)]
selftests: mptcp: functional tests for the userspace PM type
This change adds a selftest script that performs a comprehensive
behavioral/functional test of all userspace PM capabilities by exercising
all the newly added APIs and changes to support said capabilities.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:39:00 +0000 (19:39 -0700)]
selftests: mptcp: create listeners to receive MPJs
This change updates the "pm_nl_ctl" testing sample with a
"listen" option to bind a MPTCP listening socket to the
provided addr+port. This option is exercised in testing
subflow initiation scenarios in conjunction with userspace
path managers where the MPTCP application does not hold an
active listener to accept requests for new subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:38:59 +0000 (19:38 -0700)]
selftests: mptcp: capture netlink events
This change adds to self-testing support for the MPTCP netlink interface
by capturing various MPTCP netlink events (and all their metadata)
associated with connections, subflows and address announcements.
It is used in self-testing scripts that exercise MPTCP netlink commands
to precisely validate those operations by examining the dispatched
MPTCP netlink events in response to those commands.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:38:58 +0000 (19:38 -0700)]
selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_DESTROY
This change updates the "pm_nl_ctl" testing sample with a "dsf"
(destroy subflow) option to support the newly added netlink interface
command MPTCP_PM_CMD_SUBFLOW_DESTROY over the chosen MPTCP connection.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:38:57 +0000 (19:38 -0700)]
selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_CREATE
This change updates the "pm_nl_ctl" testing sample with a "csf"
(create subflow) option to support the newly added netlink interface
command MPTCP_PM_CMD_SUBFLOW_CREATE over the chosen MPTCP connection.
E.g. ./pm_nl_ctl csf lip 10.0.2.1 lid 23 rip 10.0.2.2 rport 56789
token 823274047
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This allows userspace to tell kernel to add a new subflow to an existing
mptcp connection.
Userspace provides the token to identify the mptcp-level connection
that needs a change in active subflows and the local and remote
addresses of the new or the to-be-removed subflow.
Acked-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:38:55 +0000 (19:38 -0700)]
selftests: mptcp: support MPTCP_PM_CMD_REMOVE
This change updates the "pm_nl_ctl" testing sample with a "rem"
(remove) option to support the newly added netlink interface command
MPTCP_PM_CMD_REMOVE to issue a REMOVE_ADDR signal over the
chosen MPTCP connection.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:38:54 +0000 (19:38 -0700)]
mptcp: netlink: Add MPTCP_PM_CMD_REMOVE
This change adds a MPTCP netlink command for issuing a
REMOVE_ADDR signal for an address over the chosen MPTCP
connection from a userspace path manager.
The command requires the following parameters: {token, loc_id}.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:38:53 +0000 (19:38 -0700)]
selftests: mptcp: support MPTCP_PM_CMD_ANNOUNCE
This change updates the "pm_nl_ctl" testing sample with an "ann"
(announce) option to support the newly added netlink interface command
MPTCP_PM_CMD_ANNOUNCE to issue ADD_ADDR advertisements over the
chosen MPTCP connection.
E.g. ./pm_nl_ctl ann 192.168.122.75 token 823274047 id 25 dev enp1s0
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:38:52 +0000 (19:38 -0700)]
mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE
This change adds a MPTCP netlink interface for issuing
ADD_ADDR advertisements over the chosen MPTCP connection from a
userspace path manager.
The command requires the following parameters:
{ token, { loc_id, family, daddr4 | daddr6 [, dport] } [, if_idx],
flags[signal] }.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp: netlink: split mptcp_pm_parse_addr into two functions
Next patch will need to parse MPTCP_PM_ATTR_ADDR attributes and
fill an mptcp_addr_info structure from a different genl command
callback.
To avoid copy-paste, split the existing function to a helper
that does the common part and then call the helper from the
(renamed)mptcp_pm_parse_entry function.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:38:50 +0000 (19:38 -0700)]
mptcp: read attributes of addr entries managed by userspace PMs
This change introduces a parallel path in the kernel for retrieving
the local id, flags, if_index for an addr entry in the context of
an MPTCP connection that's being managed by a userspace PM. The
userspace and in-kernel PM modes deviate in their procedures for
obtaining this information.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kishen Maloor [Wed, 4 May 2022 02:38:49 +0000 (19:38 -0700)]
mptcp: handle local addrs announced by userspace PMs
This change adds an internal function to store/retrieve local
addrs announced by userspace PM implementations to/from its kernel
context. The function addresses the requirements of three scenarios:
1) ADD_ADDR announcements (which require that a local id be
provided), 2) retrieving the local id associated with an address,
and also where one may need to be assigned, and 3) reissuance of
ADD_ADDRs when there's a successful match of addr/id.
The list of all stored local addr entries is held under the
MPTCP sock structure. Memory for these entries is allocated from
the sock option buffer, so the list of addrs is bounded by optmem_max.
The list if not released via REMOVE_ADDR signals is ultimately
freed when the sock is destructed.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Sun, 20 Mar 2022 14:07:14 +0000 (16:07 +0200)]
net/mlx5: Simplify IPsec capabilities logic
Reduce number of hard-coded IPsec capabilities by making sure
that mlx5_ipsec_device_caps() sets only supported bits.
As part of this change, remove _ACCEL_ notations from the capabilities
names as they represent IPsec-capable device, so it is aligned with
MLX5_CAP_IPSEC() macro. And prepare the code to IPsec full offload mode.
Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Leon Romanovsky [Sun, 20 Mar 2022 13:50:16 +0000 (15:50 +0200)]
net/mlx5: Don't advertise IPsec netdev support for non-IPsec device
Device that lacks proper IPsec capabilities won't pass mlx5e_ipsec_init()
later, so no need to advertise HW netdev offload support for something that
isn't going to work anyway.
Fixes: a52db1ab3173 ("net/mlx5e: Remove dependency in IPsec initialization flows") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Leon Romanovsky [Thu, 10 Mar 2022 18:48:03 +0000 (20:48 +0200)]
net/mlx5: Make sure that no dangling IPsec FS pointers exist
The IPsec FS code was implemented with anti-pattern there failures
in create functions left the system with dangling pointers that were
cleaned in global routines.
The less error prone approach is to make sure that failed function
cleans everything internally.
As part of this change, we remove the batch of one liners and rewrite
get/put functions to remove ambiguity.
Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Leon Romanovsky [Wed, 9 Mar 2022 08:35:05 +0000 (10:35 +0200)]
net/mlx5: Merge various control path IPsec headers into one file
The mlx5 IPsec code has logical separation between code that operates
with XFRM objects (ipsec.c), HW objects (ipsec_offload.c), flow steering
logic (ipsec_fs.c) and data path (ipsec_rxtx.c).
Such separation makes sense for C-files, but isn't needed at all for
H-files as they are included in batch anyway.
Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Leon Romanovsky [Tue, 8 Mar 2022 18:55:00 +0000 (20:55 +0200)]
net/mlx5: Remove useless validity check
All callers build xfrm attributes with help of mlx5e_ipsec_build_accel_xfrm_attrs()
function that ensure validity of attributes. There is no need to recheck
them again.
Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Leon Romanovsky [Tue, 8 Mar 2022 18:36:15 +0000 (20:36 +0200)]
net/mlx5: Store IPsec ESN update work in XFRM state
mlx5 IPsec code updated ESN through workqueue with allocation calls
in the data path, which can be saved easily if the work is created
during XFRM state initialization routine.
The locking used later in the work didn't protect from anything because
change of HW context is possible during XFRM state add or delete only,
which can cancel work and make sure that it is not running.
Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Leon Romanovsky [Tue, 1 Mar 2022 09:55:25 +0000 (11:55 +0200)]
net/mlx5: Don't hide fallback to software IPsec in FS code
The XFRM code performs fallback to software IPsec if .xdo_dev_state_add()
returns -EOPNOTSUPP. This is what mlx5 did very deep in its stack trace,
despite have all the knowledge that IPsec is not going to work in very
early stage.
This is achieved by making sure that priv->ipsec pointer is valid for
fully working and supported hardware crypto IPsec engine.
In case, the hardware IPsec is not supported, the XFRM code will set NULL
to xso->dev and it will prevent from calls to various .xdo_dev_state_*()
callbacks.
Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jakub Kicinski [Wed, 4 May 2022 00:27:49 +0000 (17:27 -0700)]
Merge tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.19
First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.
mac80211
- host based BSS color collision detection
- prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support
rtw88
- support TP-Link T2E devices
rtw89
- support firmware crash simulation
- preparation for 8852ce hardware support
ath11k
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support for QCA6390 and WCN6855
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- support for WCN6750
wcn36xx
- support for transmit rate reporting to user space
* tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits)
rtw89: 8852c: rfk: add DPK
rtw89: 8852c: rfk: add IQK
rtw89: 8852c: rfk: add RX DCK
rtw89: 8852c: rfk: add RCK
rtw89: 8852c: rfk: add TSSI
rtw89: 8852c: rfk: add LCK
rtw89: 8852c: rfk: add DACK
rtw89: 8852c: rfk: add RFK tables
plfxlc: fix le16_to_cpu warning for beacon_interval
rtw88: remove a copy of the NAPI_POLL_WEIGHT define
carl9170: tx: fix an incorrect use of list iterator
wil6210: use NAPI_POLL_WEIGHT for napi budget
ath10k: remove a copy of the NAPI_POLL_WEIGHT define
ath11k: Add support for WCN6750 device
ath11k: Datapath changes to support WCN6750
ath11k: HAL changes to support WCN6750
ath11k: Add QMI changes for WCN6750
ath11k: Fetch device information via QMI for WCN6750
ath11k: Add register access logic for WCN6750
ath11k: Add HW params for WCN6750
...
====================
Jakub Kicinski [Mon, 2 May 2022 23:27:03 +0000 (16:27 -0700)]
netdev: reshuffle netif_napi_add() APIs to allow dropping weight
Most drivers should not have to worry about selecting the right
weight for their NAPI instances and pass NAPI_POLL_WEIGHT.
It'd be best if we didn't require the argument at all and selected
the default internally.
This change prepares the ground for such reshuffling, allowing
for a smooth transition. The following API should remain after
the next release cycle:
netif_napi_add()
netif_napi_add_weight()
netif_napi_add_tx()
netif_napi_add_tx_weight()
Where the _weight() variants take an explicit weight argument.
I opted for a _weight() suffix rather than a __ prefix, because
we use __ in places to mean that caller needs to also issue a
synchronize_net() call.
Vladimir Oltean [Mon, 2 May 2022 15:54:24 +0000 (18:54 +0300)]
selftests: forwarding: add basic QoS classification test for Ocelot switches
Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for
Ocelot switches. Advanced QoS classification using tc filters is covered
by tc_flower_chains.sh in the same directory.
This series builds upon the path manager mode selection changes merged
in 1ab16cea1249 ("Merge branch 'mptcp-path-manager-mode-selection'") to
further modify the path manager code in preparation for adding the new
netlink commands to announce/remove advertised addresses and
create/destroy subflows of an MPTCP connection. The third and final
patch series for the userspace path manager will implement those
commands as discussed in
https://lore.kernel.org/netdev/23ff3b49-2563-1874-fa35-3af55d3088e7@linux.intel.com/#r
Patches 1, 5, and 7 remove some internal constraints on path managers
(in general) without changing in-kernel PM behavior.
Patch 2 adds a self test to validate MPTCP address advertisement ack
behavior.
Patches 3, 4, and 6 add new attributes to existing MPTCP netlink events
and track internal state for populating those attributes.
====================
Kishen Maloor [Mon, 2 May 2022 20:52:36 +0000 (13:52 -0700)]
mptcp: expose server_side attribute in MPTCP netlink events
This change records the 'server_side' attribute of MPTCP_EVENT_CREATED
and MPTCP_EVENT_ESTABLISHED events to inform their recipient about the
Client/Server role of the running MPTCP application.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/246 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kishen Maloor [Mon, 2 May 2022 20:52:35 +0000 (13:52 -0700)]
mptcp: establish subflows from either end of connection
This change updates internal logic to permit subflows to be
established from either the client or server ends of MPTCP
connections. This symmetry and added flexibility may be
harnessed by PM implementations running on either end in
creating new subflows.
The essence of this change lies in not relying on the
"server_side" flag (which continues to be available if needed).
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kishen Maloor [Mon, 2 May 2022 20:52:34 +0000 (13:52 -0700)]
mptcp: reflect remote port (not 0) in ANNOUNCED events
Per RFC 8684, if no port is specified in an ADD_ADDR message, MPTCP
SHOULD attempt to connect to the specified address on the same port
as the port that is already in use by the subflow on which the
ADD_ADDR signal was sent.
To facilitate that, this change reflects the specific remote port in
use by that subflow in MPTCP_EVENT_ANNOUNCED events.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kishen Maloor [Mon, 2 May 2022 20:52:33 +0000 (13:52 -0700)]
mptcp: store remote id from MP_JOIN SYN/ACK in local ctx
This change reads the addr id assigned to the remote endpoint
of a subflow from the MP_JOIN SYN/ACK message and stores it
in the related subflow context. The remote id was not being
captured prior to this change, and will now provide a consistent
view of remote endpoints and their ids as seen through netlink
events.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mat Martineau [Mon, 2 May 2022 20:52:32 +0000 (13:52 -0700)]
selftests: mptcp: ADD_ADDR echo test with missing userspace daemon
Check userspace PM behavior to ensure ADD_ADDR echoes are only sent when
there is an active userspace daemon. If the daemon is restarting or
hasn't loaded yet, the missing echo will cause the peer to retransmit
the ADD_ADDR - and hopefully the daemon will be ready to receive it at
that later time.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kishen Maloor [Mon, 2 May 2022 20:52:31 +0000 (13:52 -0700)]
mptcp: bypass in-kernel PM restrictions for non-kernel PMs
Current limits on the # of addresses/subflows must apply only to
in-kernel PM managed sockets. Thus this change removes such
restrictions on connections overseen by non-kernel (e.g. userspace)
PMs. This change also ensures that the kernel does not record stats
inside struct mptcp_pm_data updated along kernel code paths when exercised
via non-kernel PMs.
Additionally, address announcements are acknolwedged and subflow
requests are honored only when it's deemed that a userspace path
manager is active at the time.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 3 May 2022 10:43:41 +0000 (12:43 +0200)]
Merge tag 'mlx5-updates-2022-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-05-02
1) Trivial Misc updates to mlx5 driver
2) From Mark Bloch: Flow steering, general steering refactoring/cleaning
An issue with flow steering deletion flow (when creating a rule without
dests) turned out to be easy to fix but during the fix some issue
with the flow steering creation/deletion flows have been found.
The following patch series tries to fix long standing issues with flow
steering code and hopefully preventing silly future bugs.
A) Fix an issue where a proper dest type wasn't assigned.
B) Refactor and fix dests enums values, refactor deletion
function and do proper bookkeeping of dests.
C) Change mlx5_del_flow_rules() to delete rules when there are no
no more rules attached associated with an FTE.
D) Don't call hard coded deletion function but use the node's
defined one.
E) Add a WARN_ON() to catch future bugs when an FTE with dests
is deleted.
* tag 'mlx5-updates-2022-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: fs, an FTE should have no dests when deleted
net/mlx5: fs, call the deletion function of the node
net/mlx5: fs, delete the FTE when there are no rules attached to it
net/mlx5: fs, do proper bookkeeping for forward destinations
net/mlx5: fs, add unused destination type
net/mlx5: fs, jump to exit point and don't fall through
net/mlx5: fs, refactor software deletion rule
net/mlx5: fs, split software and IFC flow destination definitions
net/mlx5e: TC, set proper dest type
net/mlx5e: Remove unused mlx5e_dcbnl_build_rep_netdev function
net/mlx5e: Drop error CQE handling from the XSK RX handler
net/mlx5: Print initializing field in case of timeout
net/mlx5: Delete redundant default assignment of runtime devlink params
net/mlx5: Remove useless kfree
net/mlx5: use kvfree() for kvzalloc() in mlx5_ct_fs_smfs_matcher_create
====================
====================
mlxsw: Remove size limitations on egress descriptor buffer
Petr says:
Spectrum machines have two resources related to keeping packets in an
internal buffer: bytes (allocated in cell-sized units) for packet payload,
and descriptors, for keeping headers. Currently, mlxsw only configures the
bytes part of the resource management.
Spectrum switches permit a full parallel configuration for the descriptor
resources, including port-pool and port-TC-pool quotas. By default, these
are all configured to use pool 14, with an infinite quota. The ingress pool
14 is then infinite in size.
However, egress pool 14 has finite size by default. The size is chip
dependent, but always much lower than what the chip actually permits. As a
result, we can easily construct workloads that exhaust the configured
descriptor limit.
Going forward, mlxsw will have to fix this issue properly by maintaining
descriptor buffer sizes, TC bindings, and quotas that match the
architecture recommendation. Short term, fix the issue by configuring the
egress descriptor pool to be infinite in size as well. This will maintain
the same configuration philosophy, but will unlock all chip resources to be
usable.
In this patchset, patch #1 first adds the "desc" field into the pool
configuration register. Then in patch #2, the new field is used to
configure both ingress and egress pool 14 as infinite.
In patches #3 and #4, add a selftest that verifies that a large burst
can be absorbed by the shared buffer. This test specifically exercises a
scenario where descriptor buffer is the limiting factor and the test
fails without the above patches.
====================
Add two helpers, start_traffic_pktsize() and start_tcp_traffic_pktsize(),
that allow explicit overriding of packet size. Change start_traffic() and
start_tcp_traffic() to dispatch through these helpers with the default
packet size.
Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Machata [Mon, 2 May 2022 08:49:24 +0000 (11:49 +0300)]
mlxsw: Configure descriptor buffers
Spectrum machines have two resources related to keeping packets in an
internal buffer: bytes (allocated in cell-sized units) for packet payload,
and descriptors, for keeping metadata. Currently, mlxsw only configures the
bytes part of the resource management.
Spectrum switches permit a full parallel configuration for the descriptor
resources, including port-pool and port-TC-pool quotas. By default, these
are all configured to use pool 14, with an infinite quota. The ingress pool
14 is then infinite in size.
However, egress pool 14 has finite size by default. The size is chip
dependent, but always much lower than what the chip actually permits. As a
result, we can easily construct workloads that exhaust the configured
descriptor limit.
Fix the issue by configuring the egress descriptor pool to be infinite in
size as well. This will maintain the configuration philosophy of the
default configuration, but will unlock all chip resources to be usable.
In the code, include both the configuration of ingress and ingress, mostly
for clarity.
Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Machata [Mon, 2 May 2022 08:49:23 +0000 (11:49 +0300)]
mlxsw: reg: Add "desc" field to SBPR
SBPR, or Shared Buffer Pools Register, configures and retrieves the shared
buffer pools and configuration. The desc field determines whether the
configuration relates to the byte pool or the descriptor pool.
Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ping-Ke Shih [Mon, 2 May 2022 23:54:08 +0000 (07:54 +0800)]
rtw89: 8852c: rfk: add DPK
DPK is short for digital pre-distortion calibration. It can adjusts digital
waveform according to PA linear characteristics dynamically to enhance
TX EVM.
Do this calibration when we are going to run on AP channel. To prevent
power offset out of boundary, it monitors thermal and set proper boundary
to register.
8852c needs two backup buffers, so we enlarge the array. But, 8852a still
needs only one, so it only uses first element (index zero).
Ping-Ke Shih [Mon, 2 May 2022 23:54:07 +0000 (07:54 +0800)]
rtw89: 8852c: rfk: add IQK
IQ signal calibration is a very important calibration to yield good RF
performance. We do this calibration only if we are going to run on AP
channel. During scanning phase, without this calibration RF performance
is still acceptable because it transmits with low data rate at this phase.
Ping-Ke Shih [Mon, 2 May 2022 23:54:04 +0000 (07:54 +0800)]
rtw89: 8852c: rfk: add TSSI
TSSI is transmitter signal strength indication, which is a close-loop
hardware circuit to feedback actual transmitting power as a reference for
next transmission.
When we setup channel to connect an AP, it does full calibration. When
switching bands or channels, it needs to reset hardware status to prevent
use wrong feedback of previous transmission.
To do TX power compensation reflecting current temperature, it loads tables
of compensation values into registers according to channel and band group.
Ping-Ke Shih [Mon, 2 May 2022 23:54:03 +0000 (07:54 +0800)]
rtw89: 8852c: rfk: add LCK
LCK is short fro LC Tank calibration. Do this calibration once driver
loads RF parameters table. Since the characteristic can be changed by
temperature, we do this calibration again if difference of thermal value
is over a threshold.
Ping-Ke Shih [Mon, 2 May 2022 23:54:01 +0000 (07:54 +0800)]
rtw89: 8852c: rfk: add RFK tables
These tables are used by RFK (RF calibration) to set parameters. These
parameters can trigger certain calibration, or configure/reset settings
before and after RF calibrations.
Mark Bloch [Tue, 22 Mar 2022 12:58:02 +0000 (12:58 +0000)]
net/mlx5: fs, an FTE should have no dests when deleted
When deleting an FTE it should have no dests, which means
fte->dests_size should be 0. Add a WARN_ON() to catch bugs
where the proper tracking wasn't done.
Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mark Bloch [Tue, 15 Mar 2022 11:51:55 +0000 (11:51 +0000)]
net/mlx5: fs, call the deletion function of the node
Don't call del_hw_fte() directly, instead use the hardware deletion
function set. This is just a small cleanup and doesn't change anything
as for an FTE the deletion function is already set to del_hw_fte().
Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mark Bloch [Tue, 15 Mar 2022 11:23:40 +0000 (11:23 +0000)]
net/mlx5: fs, delete the FTE when there are no rules attached to it
When an FTE has no children is means all the rules where removed
and the FTE can be deleted regardless of the dests_size value.
While dests_size should be 0 when there are no children
be extra careful not to leak memory or get firmware syndrome
if the proper bookkeeping of dests_size wasn't done.
Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mark Bloch [Tue, 15 Mar 2022 11:22:17 +0000 (11:22 +0000)]
net/mlx5: fs, do proper bookkeeping for forward destinations
Keep track after destinations that are forward destinations.
When a forward destinations is removed from an FTE check if
the actions bits need to be updated.
Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mark Bloch [Tue, 15 Mar 2022 14:08:23 +0000 (14:08 +0000)]
net/mlx5: fs, add unused destination type
When the caller doesn't pass a destination fs_core will create a unused
rule just so a context can be returned. This unused rule
is zeroed out and its type is 0 which can be mixed up with
MLX5_FLOW_DESTINATION_TYPE_VPORT.
Create a dedicated type to differentiate between the two
named MLX5_FLOW_DESTINATION_TYPE_NONE.
Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mark Bloch [Tue, 15 Mar 2022 10:45:00 +0000 (10:45 +0000)]
net/mlx5: fs, jump to exit point and don't fall through
For code clarity and to prevent future bugs make sure to jump
to the exit point once done handling that specific type.
This aligns the code with the rest logic in the function.
Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mark Bloch [Tue, 15 Mar 2022 10:44:14 +0000 (10:44 +0000)]
net/mlx5: fs, refactor software deletion rule
When deleting a rule make sure that for every type dests_size is
decreased only once and no other logic is executed.
Without this dests_size might be decreased twice when dests_size == 1
so the if for that type won't be entered and if action has
MLX5_FLOW_CONTEXT_ACTION_FWD_DEST set dests_size will be decreased again.
Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mark Bloch [Tue, 22 Mar 2022 09:16:39 +0000 (09:16 +0000)]
net/mlx5: fs, split software and IFC flow destination definitions
Separate flow destinations between software and IFC.
Flow destination type passed by callers was used as the input in
firmware commands and over the years software only types were added
which resulted in mixing between the two.
Create an IFC enum that contains only the flow destinations defined
when talking to the firmware.
Now that there is a proper software only enum for flow destinations
the hardcoded values can be removed as the values are no longer used
in firmware commands.
Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Gal Pressman [Tue, 29 Mar 2022 12:24:33 +0000 (15:24 +0300)]
net/mlx5e: Remove unused mlx5e_dcbnl_build_rep_netdev function
Commit bdbdde7f1648 ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
removed the usage of mlx5e_dcbnl_build_rep_netdev() from the driver,
delete the function.
Shay Drory [Wed, 3 Nov 2021 10:18:35 +0000 (12:18 +0200)]
net/mlx5: Delete redundant default assignment of runtime devlink params
Runtime devlink params always read their values from the get() callbacks.
Also, it is an error to set driverinit_value for params which don't
support driverinit cmode. Delete such assignments.
In addition, move the set of default matching mode inside eswitch code.
projects / kernel.git / log