PM / devfreq: passive: Keep cpufreq_policy for possible cpus
The passive governor requires the cpu data to get the next target frequency
of devfreq device if depending on cpu. In order to reduce the unnecessary
memory data, keep cpufreq_policy data for possible cpus instead of NR_CPU.
Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Chanwoo Choi [Tue, 2 Mar 2021 08:22:50 +0000 (17:22 +0900)]
PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
In order to keep the consistent coding style between passive_devfreq
and passive_cpufreq, use common code for handling required opp property.
Also remove the unneed conditional statement and unify the comment
of both passive_devfreq and passive_cpufreq when getting the target frequency.
Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Saravana Kannan [Tue, 2 Mar 2021 06:58:21 +0000 (15:58 +0900)]
PM / devfreq: Add cpu based scaling support to passive governor
Many CPU architectures have caches that can scale independent of the
CPUs. Frequency scaling of the caches is necessary to make sure that the
cache is not a performance bottleneck that leads to poor performance and
power. The same idea applies for RAM/DDR.
To achieve this, this patch adds support for cpu based scaling to the
passive governor. This is accomplished by taking the current frequency
of each CPU frequency domain and then adjust the frequency of the cache
(or any devfreq device) based on the frequency of the CPUs. It listens
to CPU frequency transition notifiers to keep itself up to date on the
current CPU frequency.
To decide the frequency of the device, the governor does one of the
following:
* Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
* Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
[Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Brian Norris [Wed, 6 Apr 2022 01:48:42 +0000 (18:48 -0700)]
PM / devfreq: rk3399_dmc: Block PMU during transitions
See the previous patch ("soc: rockchip: power-domain: Manage resource
conflicts with firmware") for a thorough explanation of the conflicts.
While ARM Trusted Firmware may be modifying memory controller and
power-domain states, we need to block the kernel's power-domain driver.
If the power-domain driver is disabled, there is no resource conflict
and this becomes a no-op.
Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Brian Norris [Wed, 6 Apr 2022 01:48:41 +0000 (18:48 -0700)]
soc: rockchip: power-domain: Manage resource conflicts with firmware
On RK3399 platforms, power domains are managed mostly by the kernel
(drivers/soc/rockchip/pm_domains.c), but there are a few exceptions
where ARM Trusted Firmware has to be involved:
(1) system suspend/resume
(2) DRAM DVFS (a.k.a., "ddrfreq")
Exception (1) does not cause much conflict, since the kernel has
quiesced itself by the time we make the relevant PSCI call.
Exception (2) can cause conflict, because of two actions:
(a) ARM Trusted Firmware needs to read/modify/write the PMU_BUS_IDLE_REQ
register to idle the memory controller domain; the kernel driver
also has to touch this register for other domains.
(b) ARM Trusted Firmware needs to manage the clocks associated with
these domains.
To elaborate on (b): idling a power domain has always required ungating
an array of clocks; see this old explanation from Rockchip:
https://lore.kernel.org/linux-arm-kernel/54503C19.9060607@rock-chips.com/
Historically, ARM Trusted Firmware has avoided this issue by using a
special PMU_CRU_GATEDIS_CON0 register -- this register ungates all the
necessary clocks -- when idling the memory controller. Unfortunately,
we've found that this register is not 100% sufficient; it does not turn
the relevant PLLs on [0].
So it's possible to trigger issues with something like the following:
1. enable a power domain (e.g., RK3399_PD_VDU) -- kernel will
temporarily enable relevant clocks/PLLs, then turn them back off
2. a PLL (e.g., PLL_NPLL) is part of the clock tree for
RK3399_PD_VDU's clocks but otherwise unused; NPLL is disabled
3. perform a ddrfreq transition (rk3399_dmcfreq_target() -> ...
drivers/clk/rockchip/clk-ddr.c / ROCKCHIP_SIP_DRAM_FREQ)
4. ARM Trusted Firmware unagates VDU clocks (via PMU_CRU_GATEDIS_CON0)
5. ARM Trusted firmware idles the memory controller domain
6. Step 5 waits on the VDU domain/clocks, but NPLL is still off
i.e., we hang the system.
So for (b), we need to at a minimum manage the relevant PLLs on behalf
of firmware. It's easier to simply manage the whole clock tree, in a
similar way we do in rockchip_pd_power().
For (a), we need to provide mutual exclusion betwen rockchip_pd_power()
and firmware. To resolve that, we simply grab the PMU mutex and release
it when ddrfreq is done.
The Chromium OS kernel has been carrying versions of part of this hack
for a while, based on some new custom notifiers [1]. I've rewritten as a
simple function call between the drivers, which is OK because:
* the PMU driver isn't enabled, and we don't have this problem at all
(the firmware should have left us in an OK state, and there are no
runtime conflicts); or
* the PMU driver is present, and is a single instance.
And the power-domain driver cannot be removed, so there's no lifetime
management to worry about.
For completeness, there's a 'dmc_pmu_mutex' to guard (likely
theoretical?) probe()-time races. It's OK for the memory controller
driver to start running before the PMU, because the PMU will avoid any
critical actions during the block() sequence.
[0] The RK3399 TRM for PMU_CRU_GATEDIS_CON0 only talks about ungating
clocks. Based on experimentation, we've found that it does not power
up the necessary PLLs.
[1] CHROMIUM: soc: rockchip: power-domain: Add notifier to dmc driver
https://chromium-review.googlesource.com/q/I242dbd706d352f74ff706f5cbf42ebb92f9bcc60
Notably, the Chromium solution only handled conflict (a), not (b).
In practice, item (b) wasn't a problem in many cases because we
never managed to fully power off PLLs. Now that the (upstream) video
decoder driver performs runtime clock management, we often power off
NPLL.
Signed-off-by: Brian Norris <briannorris@chromium.org> Tested-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Brian Norris [Tue, 8 Mar 2022 19:08:53 +0000 (11:08 -0800)]
PM / devfreq: rk3399_dmc: Drop excess timing properties
All of these properties are initialized by ARM Trusted Firmware, and
have been since the early days of this chip. It's redundant (and
possibly wrong) to do this here now. What's more, there seems to be some
confusion about the units and some of the definitions of this timing
struct: the DT docs say MHz for many of these, but downstream users were
in Hz (and therefore, the ATF interface was Hz). Also, the in-driver
usage for some of these (e.g., for comparing to target frequency) were
in Hz too. So doubly wrong.
We can avoid thinking about who got the right units by dropping the
unnecessary code and properties. They are marked deprecated in the
binding schema.
Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Brian Norris [Tue, 8 Mar 2022 19:08:52 +0000 (11:08 -0800)]
PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props
These properties are:
* undocumented
* directly representing software properties, not hardware properties
* unused (no in-tree users, yet; this IP block has so far only been used
in downstream kernels)
Let's just stick the values that downstream users have been using
directly in the driver and call it a day.
Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Brian Norris [Tue, 8 Mar 2022 19:08:51 +0000 (11:08 -0800)]
dt-bindings: devfreq: rk3399_dmc: Add more disable-freq properties
DDR DVFS tuning has found that several power-saving features don't have
good tradeoffs at higher frequencies -- at higher frequencies, we'll see
glitches or other errors. Provide tuning controls so these can be
disabled at higher OPPs, and left active only at the lower ones.
Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Brian Norris [Tue, 8 Mar 2022 19:08:50 +0000 (11:08 -0800)]
dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds
It's inefficient to use the same number of cycles for all OPPs, since
lower frequencies make for longer idle times. Let's specify the idle
time instead, so software can pick the optimal number of cycles on its
own.
NB: these bindings aren't used anywhere yet.
Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Brian Norris [Tue, 8 Mar 2022 19:08:49 +0000 (11:08 -0800)]
dt-bindings: devfreq: rk3399_dmc: Fix Hz units
The driver and all downstream device trees [1] are using Hz units, but
the document claims MHz. DRAM frequency for these systems can't possibly
exceed 2^32-1 Hz, so the choice of unit doesn't really matter than much.
Rather than add unnecessary risk in getting the units wrong, let's just
go with the unofficial convention and make the docs match reality.
A sub-1MHz frequency is extremely unlikely, so include a minimum in the
schema, to help catch anybody who might have believed this was MHz.
[1] And notably, also those trying to upstream them:
https://lore.kernel.org/lkml/20210308233858.24741-3-daniel.lezcano@linaro.org/
Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
These DRAM configuration properties are all handled in ARM Trusted
Firmware (and have been since the early days of this SoC), and there are
no in-tree users of the DMC binding yet. It's better to just defer to
firmware instead of maintaining this large list of properties.
There's also some confusion about units: many of these are specified in
MHz, but the downstream users and driver code are treating them as Hz, I
believe. Rather than straighten all that out, I just drop them.
Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Brian Norris [Tue, 8 Mar 2022 19:08:47 +0000 (11:08 -0800)]
dt-bindings: devfreq: rk3399_dmc: Convert to YAML
I want to add, deprecate, and bugfix some properties, as well as add the
first users. This is easier with a proper schema.
The transformation is mostly straightforward, plus a few notable tweaks:
* Renamed rockchip,dram_speed_bin to rockchip,ddr3_speed_bin. The
driver code and the example matched, but the description was
different. I went with the implementation. Note that this property is
also slated for deprecation/deletion in the subsequent patches.
* Drop upthreshold and downdifferential properties from the example.
These were undocumented (so, wouldn't pass validation), but were
representing software properties (governor tweaks). I drop them from
the driver in subsequent patches.
* Rename clock from pclk_ddr_mon to dmc_clk. The driver, DT example,
and all downstream users matched -- the binding definition was the
exception. Anyway, "dmc_clk" is a more appropriately generic name.
* Choose a better filename and location (this is a memory controller).
Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Merge tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
Merge tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
Merge tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
Stephen Boyd [Sun, 3 Apr 2022 02:28:18 +0000 (19:28 -0700)]
Revert "clk: Drop the rate range on clk_put()"
This reverts commit eaef78700d60cb45dcf7b268fee78e7230b54c62. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources: socket,
mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Convert tracepoint.py example to python3
perf evlist: Directly return instead of using local ret variable
perf cpumap: More cpu map reuse by merge.
perf cpumap: Add is_subset function
perf evlist: Rename cpus to user_requested_cpus
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf beauty: Update copy of linux/socket.h with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
perf stat: Avoid SEGV if core.cpus isn't set
Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix empty $(PYTHON) expansion.
- Fix UML, which got broken by the attempt to suppress Clang warnings.
- Fix warning message in modpost.
* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: restore the warning message for missing symbol versions
Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
kbuild: Remove '-mno-global-merge'
kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
kconfig: remove stale comment about removed kconfig_print_symbol()
Merge tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- build fix for gpio
- fix crc32 build problems
- check for failed memory allocations
* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: crypto: Fix CRC32 code
MIPS: rb532: move GPIOD definition into C-files
MIPS: lantiq: check the return value of kzalloc()
mips: sgi-ip22: add a check for the return of kzalloc()
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block
Pull block driver fix from Jens Axboe:
"Got two reports on nbd spewing warnings on load now, which is a
regression from a commit that went into your tree yesterday.
Revert the problematic change for now"
* tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block:
Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
Merge tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Check for EC device - Fix a crash when using the cros_ec_typec
driver on older hardware not capable of typec commands
- Make try power role optional
- Mux configuration reorganization series from Prashant
cros_ec_debugfs:
- Fix use after free. Thanks Tzung-bi
sensorhub:
- cros_ec_sensorhub fixup - Split trace include file
misc:
- Add new mailing list for chrome-platform development:
chrome-platform@lists.linux.dev
Now with patchwork!"
* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_debugfs: detach log reader wq from devm
platform: chrome: Split trace include file
platform/chrome: cros_ec_typec: Update mux flags during partner removal
platform/chrome: cros_ec_typec: Configure muxes at start of port update
platform/chrome: cros_ec_typec: Get mux state inside configure_mux
platform/chrome: cros_ec_typec: Move mux flag checks
platform/chrome: cros_ec_typec: Check for EC device
platform/chrome: cros_ec_typec: Make try power role optional
MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
After being merged, user_events become more visible to a wider audience
that have concerns with the current API.
It is too late to fix this for this release, but instead of a full
revert, just mark it as BROKEN (which prevents it from being selected in
make config). Then we can work finding a better API. If that fails,
then it will need to be completely reverted.
To not have the code silently bitrot, still allow building it with
COMPILE_TEST.
And to prevent the uapi header from being installed, then later changed,
and then have an old distro user space see the old version, move the
header file out of the uapi directory.
Surround the include with CONFIG_COMPILE_TEST to the current location,
but when the BROKEN tag is taken off, it will use the uapi directory,
and fail to compile. This is a good way to remind us to move the header
back.
tracing: Move user_events.h temporarily out of include/uapi
While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.
Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.
Christophe Leroy [Wed, 30 Mar 2022 07:00:19 +0000 (09:00 +0200)]
ftrace: Make ftrace_graph_is_dead() a static branch
ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.
For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().
While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.
Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.
After being merged, user_events become more visible to a wider audience
that have concerns with the current API. It is too late to fix this for
this release, but instead of a full revert, just mark it as BROKEN (which
prevents it from being selected in make config). Then we can work finding
a better API. If that fails, then it will need to be completely reverted.
tracing: Rename the staging files for trace_events
When looking for implementation of different phases of the creation of the
TRACE_EVENT() macro, it is pretty useless when all helper macro
redefinitions are in files labeled "stageX_defines.h". Rename them to
state which phase the files are for. For instance, when looking for the
defines that are used to create the event fields, seeing
"stage4_event_fields.h" gives the developer a good idea that the defines
are in that file.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Li RongQing [Wed, 9 Mar 2022 08:35:44 +0000 (16:35 +0800)]
KVM: x86: fix sending PV IPI
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: 189dfa9f93d ("KVM: X86: Implement PV IPIs in linux guest") Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 29 Mar 2022 16:56:24 +0000 (12:56 -0400)]
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit cf2aaeb94b9a ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <qiuhao@sysec.org> Reported-by: Gaoning Pan <pgn@zju.edu.cn> Reported-by: Yongkang Jia <kangel@zju.edu.cn> Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Cc: stable@vger.kernel.org Fixes: f335d3af0395 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulating exit from long mode, EFER_LMA is cleared with
vmx_set_efer(). This will already unset the VM_ENTRY_IA32E_MODE control
bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE
again in exit_lmode() explicitly. In case EFER isn't supported by
hardware, long mode isn't supported, so exit_lmode() cannot be reached.
Note that, thanks to the shadow controls mechanism, this change doesn't
eliminate vmread or vmwrite.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-3-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zhenzhong Duan [Fri, 11 Mar 2022 10:26:42 +0000 (18:26 +0800)]
KVM: x86: cleanup enter_rmode()
vmx_set_efer() sets uret->data but, in fact if the value of uret->data
will be used vmx_setup_uret_msrs() will have rewritten it with the value
returned by update_transition_efer(). uret->data is consumed if and only
if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care
of (a) updating uret->data before setting uret->load_into_hardware to true
(b) setting uret->load_into_hardware to false if uret->data isn't updated.
Opportunistically use "vmx" directly instead of redoing to_vmx().
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-2-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sun, 13 Mar 2022 14:05:22 +0000 (15:05 +0100)]
KVM: MIPS: remove reference to trap&emulate virtualization
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220313140522.1307751-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 15 Mar 2022 22:17:15 +0000 (18:17 -0400)]
KVM: x86: document limitations of MSR filtering
MSR filtering requires an exit to userspace that is hard to implement and
would be very slow in the case of nested VMX vmexit and vmentry MSR
accesses. Document the limitation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hou Wenlong [Mon, 7 Mar 2022 12:26:33 +0000 (20:26 +0800)]
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
If MSR access is rejected by MSR filtering,
kvm_set_msr()/kvm_get_msr() would return KVM_MSR_RET_FILTERED,
and the return value is only handled well for rdmsr/wrmsr.
However, some instruction emulation and state transition also
use kvm_set_msr()/kvm_get_msr() to do msr access but may trigger
some unexpected results if MSR access is rejected, E.g. RDPID
emulation would inject a #UD but RDPID wouldn't cause a exit
when RDPID is supported in hardware and ENABLE_RDTSCP is set.
And it would also cause failure when load MSR at nested entry/exit.
Since msr filtering is based on MSR bitmap, it is better to only
do MSR filtering for rdmsr/wrmsr.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <2b2774154f7532c96a6f04d71c82a8bec7d9e80b.1646655860.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hou Wenlong [Wed, 2 Mar 2022 13:15:14 +0000 (21:15 +0800)]
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
When RDTSCP is supported but RDPID is not supported in host,
RDPID emulation is available. However, __kvm_get_msr() would
only fail when RDTSCP/RDPID both are disabled in guest, so
the emulator wouldn't inject a #UD when RDPID is disabled but
RDTSCP is enabled in guest.
Like Xu [Wed, 9 Mar 2022 08:42:57 +0000 (16:42 +0800)]
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
HSW_IN_TX* bits are used in generic code which are not supported on
AMD. Worse, these bits overlap with AMD EventSelect[11:8] and hence
using HSW_IN_TX* bits unconditionally in generic code is resulting in
unintentional pmu behavior on AMD. For example, if EventSelect[11:8]
is 0x2, pmc_reprogram_counter() wrongly assumes that
HSW_IN_TX_CHECKPOINTED is set and thus forces sampling period to be 0.
Also per the SDM, both bits 32 and 33 "may only be set if the processor
supports HLE or RTM" and for "IN_TXCP (bit 33): this bit may only be set
for IA32_PERFEVTSEL2."
Opportunistically eliminate code redundancy, because if the HSW_IN_TX*
bit is set in pmc->eventsel, it is already set in attr.config.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reported-by: Jim Mattson <jmattson@google.com> Fixes: 63ed641cef8f ("perf, kvm: Support the in_tx/in_tx_cp modifiers in KVM arch perfmon emulation v5") Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220309084257.88931-1-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Sat, 26 Feb 2022 23:41:31 +0000 (15:41 -0800)]
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some
reserved bits are cleared, and some are not. Specifically, on
Zen3/Milan, bits 19 and 42 are not cleared.
When emulating such a WRMSR, KVM should not synthesize a #GP,
regardless of which bits are set. However, undocumented bits should
not be passed through to the hardware MSR. So, rather than checking
for reserved bits and synthesizing a #GP, just clear the reserved
bits.
This may seem pedantic, but since KVM currently does not support the
"Host/Guest Only" bits (41:40), it is necessary to clear these bits
rather than synthesizing #GP, because some popular guests (e.g Linux)
will set the "Host Only" bit even on CPUs that don't support
EFER.SVME, and they don't expect a #GP.
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30)
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379958] Call Trace:
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379963] amd_pmu_disable_event+0x27/0x90
Fixes: ad8737ca5403 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Reported-by: Lotus Fenn <lotusf@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Like Xu <likexu@tencent.com> Reviewed-by: David Dunn <daviddunn@google.com>
Message-Id: <20220226234131.2167175-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Trace all APICv inhibit changes and capture overall status
Trace all APICv inhibit changes instead of just those that result in
APICv being (un)inhibited, and log the current state. Debugging why
APICv isn't working is frustrating as it's hard to see why APICv is still
inhibited, and logging only the first inhibition means unnecessary onion
peeling.
Opportunistically drop the export of the tracepoint, it is not and should
not be used by vendor code due to the need to serialize toggling via
apicv_update_lock.
Note, using the common flow means kvm_apicv_init() switched from atomic
to non-atomic bitwise operations. The VM is unreachable at init, so
non-atomic is perfectly ok.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Add wrappers for setting/clearing APICv inhibits
Add set/clear wrappers for toggling APICv inhibits to make the call sites
more readable, and opportunistically rename the inner helpers to align
with the new wrappers and to make them more readable as well. Invert the
flag from "activate" to "set"; activate is painfully ambiguous as it's
not obvious if the inhibit is being activated, or if APICv is being
activated, in which case the inhibit is being deactivated.
For the functions that take @set, swap the order of the inhibit reason
and @set so that the call sites are visually similar to those that bounce
through the wrapper.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
Use an enum for the APICv inhibit reasons, there is no meaning behind
their values and they most definitely are not "unsigned longs". Rename
the various params to "reason" for consistency and clarity (inhibit may
be confused as a command, i.e. inhibit APICv, instead of the reason that
is getting toggled/checked).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Fri, 11 Mar 2022 07:03:44 +0000 (15:03 +0800)]
KVM: X86: Handle implicit supervisor access with SMAP
There are two kinds of implicit supervisor access
implicit supervisor access when CPL = 3
implicit supervisor access when CPL < 3
Current permission_fault() handles only the first kind for SMAP.
But if the access is implicit when SMAP is on, data may not be read
nor write from any user-mode address regardless the current CPL.
So the second kind should be also supported.
The first kind can be detect via CPL and access mode: if it is
supervisor access and CPL = 3, it must be implicit supervisor access.
But it is not possible to detect the second kind without extra
information, so this patch adds an artificial PFERR_EXPLICIT_ACCESS
into @access. This extra information also works for the first kind, so
the logic is changed to use this information for both cases.
The value of PFERR_EXPLICIT_ACCESS is deliberately chosen to be bit 48
which is in the most significant 16 bits of u64 and less likely to be
forced to change due to future hardware uses it.
This patch removes the call to ->get_cpl() for access mode is determined
by @access. Not only does it reduce a function call, but also remove
confusions when the permission is checked for nested TDP. The nested
TDP shouldn't have SMAP checking nor even the L2's CPL have any bearing
on it. The original code works just because it is always user walk for
NPT and SMAP fault is not set for EPT in update_permission_bitmask.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-5-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Fri, 11 Mar 2022 07:03:43 +0000 (15:03 +0800)]
KVM: X86: Rename variable smap to not_smap in permission_fault()
Comments above the variable says the bit is set when SMAP is overridden
or the same meaning in update_permission_bitmask(): it is not subjected
to SMAP restriction.
Renaming it to reflect the negative implication and make the code better
readability.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-4-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Fri, 11 Mar 2022 07:03:42 +0000 (15:03 +0800)]
KVM: X86: Fix comments in update_permission_bitmask
The commit 4c3453895667 ("KVM: MMU: speedup update_permission_bitmask")
refactored the code of update_permission_bitmask() and change the
comments. It added a condition into a list to match the new code,
so the number/order for conditions in the comments should be updated
too.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-3-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Fri, 11 Mar 2022 07:03:41 +0000 (15:03 +0800)]
KVM: X86: Change the type of access u32 to u64
Change the type of access u32 to u64 for FNAME(walk_addr) and
->gva_to_gpa().
The kinds of accesses are usually combinations of UWX, and VMX/SVM's
nested paging adds a new factor of access: is it an access for a guest
page table or for a final guest physical address.
And SMAP relies a factor for supervisor access: explicit or implicit.
So @access in FNAME(walk_addr) and ->gva_to_gpa() is better to include
all these information to do the walk.
Although @access(u32) has enough bits to encode all the kinds, this
patch extends it to u64:
o Extra bits will be in the higher 32 bits, so that we can
easily obtain the traditional access mode (UWX) by converting
it to u32.
o Reuse the value for the access kind defined by SVM's nested
paging (PFERR_GUEST_FINAL_MASK and PFERR_GUEST_PAGE_MASK) as
@error_code in kvm_handle_page_fault().
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-2-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Thu, 3 Mar 2022 15:41:12 +0000 (15:41 +0000)]
KVM: Remove dirty handling from gfn_to_pfn_cache completely
It isn't OK to cache the dirty status of a page in internal structures
for an indefinite period of time.
Any time a vCPU exits the run loop to userspace might be its last; the
VMM might do its final check of the dirty log, flush the last remaining
dirty pages to the destination and complete a live migration. If we
have internal 'dirty' state which doesn't get flushed until the vCPU
is finally destroyed on the source after migration is complete, then
we have lost data because that will escape the final copy.
This problem already exists with the use of kvm_vcpu_unmap() to mark
pages dirty in e.g. VMX nesting.
Note that the actual Linux MM already considers the page to be dirty
since we have a writeable mapping of it. This is just about the KVM
dirty logging.
For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to
track which gfn_to_pfn_caches have been used and explicitly mark the
corresponding pages dirty before returning to userspace. But we would
have needed external tracking of that anyway, rather than walking the
full list of GPCs to find those belonging to this vCPU which are dirty.
So let's rely *solely* on that external tracking, and keep it simple
rather than laying a tempting trap for callers to fall into.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: Use enum to track if cached PFN will be used in guest and/or host
Replace the guest_uses_pa and kernel_map booleans in the PFN cache code
with a unified enum/bitmask. Using explicit names makes it easier to
review and audit call sites.
Opportunistically add a WARN to prevent passing garbage; instantating a
cache without declaring its usage is either buggy or pointless.
Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Gonda [Fri, 4 Mar 2022 16:10:32 +0000 (08:10 -0800)]
KVM: SVM: Fix kvm_cache_regs.h inclusions for is_guest_mode()
Include kvm_cache_regs.h to pick up the definition of is_guest_mode(),
which is referenced by nested_svm_virtualize_tpr() in svm.h. Remove
include from svm_onhpyerv.c which was done only because of lack of
include in svm.h.
Fixes: bec77d4f997cd ("KVM: SVM: Move Nested SVM Implementation to nested.c") Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220304161032.2270688-1-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Tue, 8 Mar 2022 01:24:52 +0000 (17:24 -0800)]
KVM: x86/pmu: Use different raw event masks for AMD and Intel
The third nybble of AMD's event select overlaps with Intel's IN_TX and
IN_TXCP bits. Therefore, we can't use AMD64_RAW_EVENT_MASK on Intel
platforms that support TSX.
Declare a raw_event_mask in the kvm_pmu structure, initialize it in
the vendor-specific pmu_refresh() functions, and use that mask for
PERF_TYPE_RAW configurations in reprogram_gp_counter().
Fixes: 2eb4d7b80126 ("KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW") Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220308012452.3468611-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: Don't actually set a request when evicting vCPUs for GFN cache invd
Don't actually set a request bit in vcpu->requests when making a request
purely to force a vCPU to exit the guest. Logging a request but not
actually consuming it would cause the vCPU to get stuck in an infinite
loop during KVM_RUN because KVM would see the pending request and bail
from VM-Enter to service the request.
Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as
nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all
too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init()
without implementing handling of the request, especially since getting
test coverage of MMU notifier interaction with specific KVM features
usually requires a directed test.
Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus
to evict_vcpus. The purpose of the request is to get vCPUs out of guest
mode, it's supposed to _avoid_ waking vCPUs that are blocking.
Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to
what it wants to accomplish, and to genericize the name so that it can
used for similar but unrelated scenarios, should they arise in the future.
Add a comment and documentation to explain why the "no action" request
exists.
Add compile-time assertions to help detect improper usage. Use the inner
assertless helper in the one s390 path that makes requests without a
hardcoded request.
Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220223165302.3205276-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Tue, 29 Mar 2022 17:11:47 +0000 (13:11 -0400)]
KVM: avoid double put_page with gfn-to-pfn cache
If the cache's user host virtual address becomes invalid, there
is still a path from kvm_gfn_to_pfn_cache_refresh() where __release_gpc()
could release the pfn but the gpc->pfn field has not been overwritten
with an error value. If this happens, kvm_gfn_to_pfn_cache_unmap will
call put_page again on the same page.
Cc: stable@vger.kernel.org Fixes: 6c84388d65b5 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support") Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86/mmu: Zap only TDP MMU leafs in zap range and mmu_notifier unmap
Re-introduce zapping only leaf SPTEs in kvm_zap_gfn_range() and
kvm_tdp_mmu_unmap_gfn_range(), this time without losing a pending TLB
flush when processing multiple roots (including nested TDP shadow roots).
Dropping the TLB flush resulted in random crashes when running Hyper-V
Server 2019 in a guest with KSM enabled in the host (or any source of
mmu_notifier invalidations, KSM is just the easiest to force).
Vmx have been fix this in commit ed17bb81b81d (KVM: VMX: Do not BUG() on
out-of-bounds guest IRQ), so we can just copy source from that to fix
this.
Co-developed-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Message-Id: <20220309113025.44469-1-wang.yi59@zte.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 25 Mar 2022 16:42:52 +0000 (12:42 -0400)]
KVM: MMU: propagate alloc_workqueue failure
If kvm->arch.tdp_mmu_zap_wq cannot be created, the failure has
to be propagated up to kvm_mmu_init_vm and kvm_arch_init_vm.
kvm_arch_init_vm also has to undo all the initialization, so
group all the MMU initialization code at the beginning and
handle cleaning up of kvm_page_track_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"Assorted bits and pieces"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: drop needless assignment in aio_read()
clean overflow checks in count_mounts() a bit
seq_file: fix NULL pointer arithmetic warning
uml/x86: use x86 load_unaligned_zeropad()
asm/user.h: killed unused macros
constify struct path argument of finish_automount()/do_add_mount()
fs: Remove FIXME comment in generic_write_checks()
Merge tag 'vfs-5.18-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs fix from Darrick Wong:
"The erofs developers felt that FIEMAP should handle ranged requests
starting at s_maxbytes by returning EFBIG instead of passing the
filesystem implementation a nonsense 0-byte request.
Not sure why they keep tagging this 'iomap', but the VFS shouldn't be
asking for information about ranges of a file that the filesystem
already declared that it does not support.
- Fix a potential infinite loop in FIEMAP by fixing an off by one
error when comparing the requested range against s_maxbytes"
* tag 'vfs-5.18-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs: fix an infinite loop in iomap_fiemap
Merge tag 'xfs-5.18-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This fixes multiple problems in the reserve pool sizing functions: an
incorrect free space calculation, a pointless infinite loop, and even
more braindamage that could result in the pool being overfilled. The
pile of patches from Dave fix myriad races and UAF bugs in the log
recovery code that much to our mutual surprise nobody's tripped over.
Dave also fixed a performance optimization that had turned into a
regression.
Dave Chinner is taking over as XFS maintainer starting Sunday and
lasting until 5.19-rc1 is tagged so that I can focus on starting a
massive design review for the (feature complete after five years)
online repair feature. From then on, he and I will be moving XFS to a
co-maintainership model by trading duties every other release.
NOTE: I hope very strongly that the other pieces of the (X)FS
ecosystem (fstests and xfsprogs) will make similar changes to spread
their maintenance load.
Summary:
- Fix an incorrect free space calculation in xfs_reserve_blocks that
could lead to a request for free blocks that will never succeed.
- Fix a hang in xfs_reserve_blocks caused by an infinite loop and the
incorrect free space calculation.
- Fix yet a third problem in xfs_reserve_blocks where multiple racing
threads can overfill the reserve pool.
- Fix an accounting error that lead to us reporting reserved space as
"available".
- Fix a race condition during abnormal fs shutdown that could cause
UAF problems when memory reclaim and log shutdown try to clean up
inodes.
- Fix a bug where log shutdown can race with unmount to tear down the
log, thereby causing UAF errors.
- Disentangle log and filesystem shutdown to reduce confusion.
- Fix some confusion in xfs_trans_commit such that a race between
transaction commit and filesystem shutdown can cause unlogged dirty
inode metadata to be committed, thereby corrupting the filesystem.
- Remove a performance optimization in the log as it was discovered
that certain storage hardware handle async log flushes so poorly as
to cause serious performance regressions. Recent restructuring of
other parts of the logging code mean that no performance benefit is
seen on hardware that handle it well"
* tag 'xfs-5.18-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: drop async cache flushes from CIL commits.
xfs: shutdown during log recovery needs to mark the log shutdown
xfs: xfs_trans_commit() path must check for log shutdown
xfs: xfs_do_force_shutdown needs to block racing shutdowns
xfs: log shutdown triggers should only shut down the log
xfs: run callbacks before waking waiters in xlog_state_shutdown_callbacks
xfs: shutdown in intent recovery has non-intent items in the AIL
xfs: aborting inodes on shutdown may need buffer lock
xfs: don't report reserved bnobt space as available
xfs: fix overfilling of reserve pool
xfs: always succeed at setting the reserve pool size
xfs: remove infinite loop when reserving free block pool
xfs: don't include bnobt blocks when reserving free block pool
xfs: document the XFS_ALLOC_AGFL_RESERVE constant
Merge tag 'riscv-for-linus-5.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
- Fix the RISC-V section of the generic CPU idle bindings to comply
with the recently tightened DT schema.
* tag 'riscv-for-linus-5.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
dt-bindings: Fix phandle-array issues in the idle-states bindings
Merge tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block
Pull block driver fixes from Jens Axboe:
"Followup block driver updates and fixes for the 5.18-rc1 merge window.
In detail:
- NVMe pull request
- Fix multipath hang when disk goes live over reconnect (Anton
Eidelman)
- fix RCU hole that allowed for endless looping in multipath
round robin (Chris Leech)
- remove redundant assignment after left shift (Colin Ian King)
- add quirks for Samsung X5 SSDs (Monish Kumar R)
- fix the read-only state for zoned namespaces with unsupposed
features (Pankaj Raghav)
- use a private workqueue instead of the system workqueue in
nvmet (Sagi Grimberg)
- allow duplicate NSIDs for private namespaces (Sungup Moon)
- expose use_threaded_interrupts read-only in sysfs (Xin Hao)"
- nbd minor allocation fix (Zhang)
- drbd fixes and maintainer addition (Lars, Jakob, Christoph)
- n64cart build fix (Jackie)
- loop compat ioctl fix (Carlos)
- misc fixes (Colin, Dongli)"
* tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block:
drbd: remove check of list iterator against head past the loop body
drbd: remove usage of list iterator variable after loop
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
MAINTAINERS: add drbd co-maintainer
drbd: fix potential silent data corruption
loop: fix ioctl calls using compat_loop_info
nvme-multipath: fix hang when disk goes live over reconnect
nvme: fix RCU hole that allowed for endless looping in multipath round robin
nvme: allow duplicate NSIDs for private namespaces
nvmet: remove redundant assignment after left shift
nvmet: use a private workqueue instead of the system workqueue
nvme-pci: add quirks for Samsung X5 SSDs
nvme-pci: expose use_threaded_interrupts read-only in sysfs
nvme: fix the read-only state for zoned namespaces with unsupposed features
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
xen/blkfront: fix comment for need_copy
xen-blkback: remove redundant assignment to variable i
Merge tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Either fixes or a few additions that got missed in the initial merge
window pull. In detail:
- List iterator fix to avoid leaking value post loop (Jakob)
- One-off fix in minor count (Christophe)
- Fix for a regression in how io priority setting works for an
exiting task (Jiri)
- Fix a regression in this merge window with blkg_free() being called
in an inappropriate context (Ming)
- Misc fixes (Ming, Tom)"
* tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block:
blk-wbt: remove wbt_track stub
block: use dedicated list iterator variable
block: Fix the maximum minor value is blk_alloc_ext_minor()
block: restore the old set_task_ioprio() behaviour wrt PF_EXITING
block: avoid calling blkg_free() in atomic context
lib/sbitmap: allocate sb->map via kvzalloc_node
Merge tag 'for-5.18/io_uring-2022-04-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A little bit all over the map, some regression fixes for this merge
window, and some general fixes that are stable bound. In detail:
- Fix an SQPOLL memory ordering issue (Almog)
- Accept fixes (Dylan)
- Poll fixes (me)
- Fixes for provided buffers and recycling (me)
- Tweak to IORING_OP_MSG_RING command added in this merge window (me)
- Memory leak fix (Pavel)
- Misc fixes and tweaks (Pavel, me)"
* tag 'for-5.18/io_uring-2022-04-01' of git://git.kernel.dk/linux-block:
io_uring: defer msg-ring file validity check until command issue
io_uring: fail links if msg-ring doesn't succeeed
io_uring: fix memory leak of uid in files registration
io_uring: fix put_kbuf without proper locking
io_uring: fix invalid flags for io_put_kbuf()
io_uring: improve req fields comments
io_uring: enable EPOLLEXCLUSIVE for accept poll
io_uring: improve task work cache utilization
io_uring: fix async accept on O_NONBLOCK sockets
io_uring: remove IORING_CQE_F_MSG
io_uring: add flag for disabling provided buffer recycling
io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly
io_uring: don't recycle provided buffer if punted to async worker
io_uring: fix assuming triggered poll waitqueue is the single poll
io_uring: bump poll refs to full 31-bits
io_uring: remove poll entry from list when canceling all
io_uring: fix memory ordering when SQPOLL thread goes to sleep
io_uring: ensure that fsnotify is always called
io_uring: recycle provided before arming poll
Merge tag 'for-5.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM integrity shrink crash due to journal entry not being marked
unused.
- Fix DM bio polling to handle possibility that underlying device(s)
return BLK_STS_AGAIN during submission.
- Fix dm_io and dm_target_io flags race condition on Alpha.
- Add some pr_err debugging to help debug cases when DM ioctl structure
is corrupted.
* tag 'for-5.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix bio polling to handle possibile BLK_STS_AGAIN
dm: fix dm_io and dm_target_io flags race condition on Alpha
dm integrity: set journal entry unused when shrinking device
dm ioctl: log an error if the ioctl structure is corrupted
dt-bindings: Fix phandle-array issues in the idle-states bindings
As per c40a46e78016 ("dt-bindings: Improve phandle-array schemas"), the
phandle-array bindings have been disambiguated. This fixes the new
RISC-V idle-states bindings to comply with the schema.
Fixes: ec36ab207048 ("dt-bindings: Add common bindings for ARM and RISC-V idle states") Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Merge tag '5.18-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd updates from Steve French:
- three cleanup fixes
- shorten module load warning
- two documentation fixes
* tag '5.18-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: replace usage of found with dedicated list iterator variable
ksmbd: Remove a redundant zeroing of memory
MAINTAINERS: ksmbd: switch Sergey to reviewer
ksmbd: shorten experimental warning on loading the module
ksmbd: use netif_is_bridge_port
Documentation: ksmbd: update Feature Status table
Merge tag '5.18-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- three fixes for big endian issues in how Persistent and Volatile file
ids were stored
- Various misc. fixes: including some for oops, 2 for ioctls, 1 for
writeback
- cleanup of how tcon (tree connection) status is tracked
- Four changesets to move various duplicated protocol definitions
(defined both in cifs.ko and ksmbd) into smbfs_common/smb2pdu.h
- important performance improvement to use cached handles in some key
compounding code paths (reduces numbers of opens/closes sent in some
workloads)
- fix to allow alternate DFS target to be used to retry on a failed i/o
* tag '5.18-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()
cifs: prevent bad output lengths in smb2_ioctl_query_info()
smb3: fix ksmbd bigendian bug in oplock break, and move its struct to smbfs_common
smb3: cleanup and clarify status of tree connections
smb3: move defines for query info and query fsinfo to smbfs_common
smb3: move defines for ioctl protocol header and SMB2 sizes to smbfs_common
[smb3] move more common protocol header definitions to smbfs_common
cifs: fix incorrect use of list iterator after the loop
ksmbd: store fids as opaque u64 integers
cifs: fix bad fids sent over wire
cifs: change smb2_query_info_compound to use a cached fid, if available
cifs: convert the path to utf16 in smb2_query_info_compound
cifs: writeback fix
cifs: do not skip link targets when an I/O fails
Merge tag 'exfat-for-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Add keep_last_dots mount option to allow access to paths with
trailing dots
- Avoid repetitive volume dirty bit set/clear to improve storage life
time
* tag 'exfat-for-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: do not clear VolumeDirty in writeback
exfat: allow access to paths with trailing dots
Merge tag 'folio-5.18d' of git://git.infradead.org/users/willy/pagecache
Pull more filesystem folio updates from Matthew Wilcox:
"A mixture of odd changes that didn't quite make it into the original
pull and fixes for things that did. Also the readpages changes had to
wait for the NFS tree to be pulled first.
- Remove ->readpages infrastructure
- Remove AOP_FLAG_CONT_EXPAND
- Move read_descriptor_t to networking code
- Pass the iocb to generic_perform_write
- Minor updates to iomap, btrfs, ext4, f2fs, ntfs"
* tag 'folio-5.18d' of git://git.infradead.org/users/willy/pagecache:
btrfs: Remove a use of PAGE_SIZE in btrfs_invalidate_folio()
ntfs: Correct mark_ntfs_record_dirty() folio conversion
f2fs: Get the superblock from the mapping instead of the page
f2fs: Correct f2fs_dirty_data_folio() conversion
ext4: Correct ext4_journalled_dirty_folio() conversion
filemap: Remove AOP_FLAG_CONT_EXPAND
fs: Pass an iocb to generic_perform_write()
fs, net: Move read_descriptor_t to net.h
fs: Remove read_actor_t
iomap: Simplify is_partially_uptodate a little
readahead: Update comments
mm: remove the skip_page argument to read_pages
mm: remove the pages argument to read_pages
fs: Remove ->readpages address space operation
readahead: Remove read_cache_pages()
Merge tag 'xarray-5.18' of git://git.infradead.org/users/willy/xarray
Pull XArray updates from Matthew Wilcox:
- Documentation update
- Fix test-suite build after move of bitmap.h
- Fix xas_create_range() when a large entry is already present
- Fix xas_split() of a shadow entry
* tag 'xarray-5.18' of git://git.infradead.org/users/willy/xarray:
XArray: Update the LRU list in xas_split()
XArray: Fix xas_create_range() when multi-order entry present
XArray: Include bitmap.h from xarray.h
XArray: Document the locking requirement for the xa_state
Merge tag 'riscv-for-linus-5.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"This has a handful of new features:
- Support for CURRENT_STACK_POINTER, which enables some extra stack
debugging for HARDENED_USERCOPY.
- Support for the new SBI CPU idle extension, via cpuidle and suspend
drivers.
- Profiling has been enabled in the defconfigs.
but is mostly fixes and cleanups"
* tag 'riscv-for-linus-5.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: K210 defconfigs: Drop redundant MEMBARRIER=n
RISC-V: defconfig: Drop redundant SBI HVC and earlycon
Documentation: riscv: remove non-existent directory from table of contents
riscv: cpu.c: don't use kernel-doc markers for comments
RISC-V: Enable profiling by default
RISC-V: module: fix apply_r_riscv_rcv_branch_rela typo
RISC-V: Declare per cpu boot data as static
RISC-V: Fix a comment typo in riscv_of_parent_hartid()
riscv: Increase stack size under KASAN
riscv: Fix fill_callchain return value
riscv: dts: canaan: Fix SPI3 bus width
riscv: Rename "sp_in_global" to "current_stack_pointer"
riscv module: remove (NOLOAD)
RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine
dt-bindings: Add common bindings for ARM and RISC-V idle states
cpuidle: Add RISC-V SBI CPU idle driver
cpuidle: Factor-out power domain related code from PSCI domain driver
RISC-V: Add SBI HSM suspend related defines
RISC-V: Add arch functions for non-retentive suspend entry/exit
RISC-V: Rename relocate() and make it global
...
Merge tag 's390-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Add kretprobes framepointer verification and return address recovery
in stacktrace.
- Support control domain masks on custom zcrypt devices and filter
admin requests.
- Cleanup timer API usage.
- Rework absolute lowcore access helpers.
- Other various small improvements and fixes.
* tag 's390-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (26 commits)
s390/alternatives: avoid using jgnop mnemonic
s390/pci: rename get_zdev_by_bus() to zdev_from_bus()
s390/pci: improve zpci_dev reference counting
s390/smp: use physical address for SIGP_SET_PREFIX command
s390: cleanup timer API use
s390/zcrypt: fix using the correct variable for sizeof()
s390/vfio-ap: fix kernel doc and signature of group notifier functions
s390/maccess: rework absolute lowcore accessors
s390/smp: cleanup control register update routines
s390/smp: cleanup target CPU callback starting
s390/test_unwind: verify __kretprobe_trampoline is replaced
s390/unwind: avoid duplicated unwinding entries for kretprobes
s390/unwind: recover kretprobe modified return address in stacktrace
s390/kprobes: enable kretprobes framepointer verification
s390/test_unwind: extend kretprobe test
s390/ap: adjust whitespace
s390/ap: use insn format for new instructions
s390/alternatives: use insn format for new instructions
s390/alternatives: use instructions instead of byte patterns
s390/traps: improve panic message for translation-specification exception
...
Merge tag 'soc-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd BergmannL
"The introduction of vmap-stack on 32-bit arm caused a regression on a
few omap3/omap4 machines that pass a stack variable into a firmware
interface.
The early pre-ACPI AMD Seattle machines have been broken for a while,
Ard Biesheuvel has a series to bring them back for now.
A few machines with multiple DMA channels used on a device have the
channels in the wrong order according to the binding, which causes a
harmless warning. Reversing the order is easier than fixing the tools
to suppress the warning"
* tag 'soc-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: ls1046a: Update i2c node dma properties
arm64: dts: ls1043a: Update i2c dma properties
ARM: dts: spear1340: Update serial node properties
ARM: dts: spear13xx: Update SPI dma properties
ARM: OMAP2+: Fix regression for smc calls for vmap stack
dt: amd-seattle: add a description of the CPUs and caches
dt: amd-seattle: disable IPMI controller and some GPIO blocks on B0
dt: amd-seattle: add description of the SATA/CCP SMMUs
dt: amd-seattle: add a description of the PCIe SMMU
dt: amd-seattle: fix PCIe legacy interrupt routing
dt: amd-seattle: upgrade AMD Seattle XGBE to new SMMU binding
dt: amd-seattle: remove Overdrive revision A0 support
dt: amd-seattle: remove Husky platform
Haowen Bai [Mon, 28 Mar 2022 01:55:32 +0000 (09:55 +0800)]
perf evlist: Directly return instead of using local ret variable
Addresses this coccinelle warning:
./tools/perf/util/evlist.c:1333:5-8: Unneeded variable: "err". Return
"- ENOMEM" on line 1358
Signed-off-by: Haowen Bai <baihaowen@meizu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/1648432532-23151-1-git-send-email-baihaowen@meizu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
John Garry [Wed, 30 Mar 2022 10:22:54 +0000 (18:22 +0800)]
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
This essentially reverts commit 4a5dda025f36fcb3 ("tools/perf/build:
Speed up git-version test on re-make") and commit fdc539a04635bb7b
("perf tools: Fix dependency for version file creation")
In commit 4a5dda025f36fcb3 ("tools/perf/build: Speed up git-version test
on re-make"), a makefile dependency on .git/HEAD was added. The
background is that running PERF-VERSION-FILE is relatively slow, and
commands like "git describe" are particularly slow.
In commit fdc539a04635bb7b ("perf tools: Fix dependency for version file
creation"), an additional dependency on .git/ORIG_HEAD was added, as
.git/HEAD may not change for "git reset --hard HEAD^" command. However,
depending on whether we're on a branch or not, a "git cherry-pick" may
not lead to the version being updated.
As discussed with the git community in [0], using git internal files for
dependencies is not reliable. Commit fdc539a04635 also breaks some build
scenarios [1].
As mentioned, 4a5dda025f36fcb3 ("tools/perf/build: Speed up git-version
test on re-make") was added to speed up the build. However in commit 4b29b6ba417f4c19 ("perf tools: Fix version kernel tag") we removed the
call to "git describe", so just revert Makefile.perf back to same as pre 4a5dda025f36fcb3 ("tools/perf/build: Speed up git-version test on
re-make") and the build should not be so slow, as below:
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:
96cb593239696036 ("x86/ibt: Add IBT feature, MSR and #CP handling")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
projects / kernel.git / log