Clear wait for mailbox interrupt flag to prevent stale mailbox:
Feb 22 05:22:56 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-500a:4: LOOP UP detected (16 Gbps).
Feb 22 05:22:59 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-d04c:4: MBX Command timeout for cmd 69, ...
To fix the issue, driver needs to clear the MBX_INTR_WAIT flag on purging
the mailbox. When the stale mailbox completion does arrive, it will be
dropped.
A direct attach tape device, when gets swapped with another, was not
discovered. Fix this by looking at loop map and reinitialize link if there
are devices present.
Case (1):
The only waiter on wka_port->completion_wq is zfcp_fc_wka_port_get()
trying to open a WKA port. As such it should only be woken up by WKA port
*open* responses, not by WKA port close responses.
Case (2):
A close WKA port response coming in just after having sent a new open WKA
port request and before blocking for the open response with wait_event()
in zfcp_fc_wka_port_get() erroneously renders the wait_event a NOP
because the close handler overwrites wka_port->status. Hence the
wait_event condition is erroneously true and it does not enter blocking
state.
With non-negligible probability, the following time space sequence happens
depending on timing without this fix:
So we erroneously end up with no automatic port scan. This is a big problem
when it happens during boot. The timing is influenced by v3.19 commit 46f4d10334e9 ("zfcp: auto port scan resiliency").
Fix it by fully mutually excluding zfcp_fc_wka_port_get() and
zfcp_fc_wka_port_offline(). For that to work, we make the latter block
until we got the response for a close WKA port. In order not to penalize
the system workqueue, we move wka_port->work to our own adapter workqueue.
Note that before v2.6.30 commit da8de36448e2 ("[SCSI] zfcp: Set WKA-port to
offline on adapter deactivation"), zfcp did block in
zfcp_fc_wka_port_offline() as well, but with a different condition.
While at it, make non-functional cleanups to improve code reading in
zfcp_fc_wka_port_get(). If we cannot send the WKA port open request, don't
rely on the subsequent wait_event condition to immediately let this case
pass without blocking. Also don't want to rely on the additional condition
handling the refcount to be skipped just to finally return with -EIO.
Link: https://lore.kernel.org/r/20220729162529.1620730-1-maier@linux.ibm.com Fixes: 9300c0db8f59 ("[SCSI] zfcp: attach and release SAN nameserver port on demand") Cc: <stable@vger.kernel.org> #v2.6.28+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After ufshcd_wl_shutdown() set device power off and link off,
ufshcd_shutdown() could turn off clock/power. Also remove
pm_runtime_get_sync.
The reason why it is safe to remove pm_runtime_get_sync() is because:
- ufshcd_wl_shutdown() -> pm_runtime_get_sync() will resume hba->dev too.
- device resume(turn on clk/power) is not required, even if device is in
RPM_SUSPENDED.
Link: https://lore.kernel.org/r/20220727030526.31022-1-peter.wang@mediatek.com Fixes: 1799d66d7dd4 ("scsi: ufs: core: Enable power management for wlun") Cc: <stable@vger.kernel.org> # 5.15.x Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the function s3fb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
In the function arkfb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
In the function vt8623fb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
If a file has FI_COMPRESS_RELEASED, all writes for it should not be
allowed. However, as of now, in case of compress_mode=user, writes
triggered by IOCTLs like F2FS_IOC_DE/COMPRESS_FILE are allowed unexpectly,
which could crash that file.
To fix it, let's do not allow F2FS_IOC_DE/COMPRESS_IOCTL if a file already
has FI_COMPRESS_RELEASED flag.
Since commit 7c1c191e44c1 ("f2fs: let's allow compression for mmap files"),
it has been allowed to compress mmap files. However, in compress_mode=user,
it is not allowed yet. To keep the same concept in both compress_modes,
f2fs_ioc_(de)compress_file() should also allow it.
Let's remove checking mmap files in f2fs_ioc_(de)compress_file() so that
the compression for mmap files is also allowed in compress_mode=user.
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
With CONFIG_PREEMPTION disabled, arch/x86/entry/thunk_$(BITS).o becomes
an empty object file.
With some old versions of binutils (i.e., 2.35.90.20210113-1ubuntu1) the
GNU assembler doesn't generate a symbol table for empty object files and
objtool fails with the following error when a valid symbol table cannot
be found:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol table
To prevent this from happening, build thunk_$(BITS).o only if
CONFIG_PREEMPTION is enabled.
Commit 9c1854c40af7 ("sched/core: Optimize ttwu() spinning on p->on_cpu")
optimises ttwu by queueing a task that is descheduling on the wakelist,
but does not check if the task descheduling is still allowed to run on that CPU.
In this warning, the problematic task is a workqueue rescue thread which
checks if the rescue is for a per-cpu workqueue and running on the wrong CPU.
While this is early in boot and it should be possible to create workers,
the rescue thread may still used if the MAYDAY_INITIAL_TIMEOUT is reached
or MAYDAY_INTERVAL and on a sufficiently large machine, the rescue
thread is being used frequently.
Tracing confirmed that the task should have migrated properly using the
stopper thread to handle the migration. However, a parallel wakeup from udev
running on another CPU that does not share CPU cache observes p->on_cpu and
uses task_cpu(p), queues the task on the old CPU and triggers the warning.
Check that the wakee task that is descheduling is still allowed to run
on its current CPU and if not, wait for the descheduling to complete
and select an allowed CPU.
Wakelist can help avoid cache bouncing and offload the overhead of waker
cpu. So far, using wakelist within the same llc only happens on
WF_ON_CPU, and this limitation could be removed to further improve
wakeup performance.
The commit 531eac291491 ("sched: Only queue remote wakeups when
crossing cache boundaries") disabled queuing tasks on wakelist when
the cpus share llc. This is because, at that time, the scheduler must
send IPIs to do ttwu_queue_wakelist. Nowadays, ttwu_queue_wakelist also
supports TIF_POLLING, so this is not a problem now when the wakee cpu is
in idle polling.
Benefits:
Queuing the task on idle cpu can help improving performance on waker cpu
and utilization on wakee cpu, and further improve locality because
the wakee cpu can handle its own rq. This patch helps improving rt on
our real java workloads where wakeup happens frequently.
Consider the normal condition (CPU0 and CPU1 share same llc)
Before this patch:
We see CPU0 can finish its work earlier. It only needs to put task to
wakelist and return.
While CPU1 is idle, so let itself handle its own runqueue data.
This patch brings no difference about IPI.
This patch only takes effect when the wakee cpu is:
1) idle polling
2) idle not polling
For 1), there will be no IPI with or without this patch.
For 2), there will always be an IPI before or after this patch.
Before this patch: waker cpu will enqueue task and check preempt. Since
"idle" will be sure to be preempted, waker cpu must send a resched IPI.
After this patch: waker cpu will put the task to the wakelist of wakee
cpu, and send an IPI.
Benchmark:
We've tested schbench, unixbench, and hachbench on both x86 and arm64.
On x86 (Intel Xeon Platinum 8269CY):
schbench -m 2 -t 8
hackbench -g 1 -l 100000
before after
Time 4.217 2.916
Our patch has improvement on schbench, hackbench
and Pipe-based Context Switching of unixbench
when there exists idle cpus,
and no obvious regression on other tests of unixbench.
This can help improve rt in scenes where wakeup happens frequently.
The commit 5378097a078d ("sched/core: Offload wakee task activation if it
the wakee is descheduling") checked rq->nr_running <= 1 to avoid task
stacking when WF_ON_CPU.
Per the ordering of writes to p->on_rq and p->on_cpu, observing p->on_cpu
(WF_ON_CPU) in ttwu_queue_cond() implies !p->on_rq, IOW p has gone through
the deactivate_task() in __schedule(), thus p has been accounted out of
rq->nr_running. As such, the task being the only runnable task on the rq
implies reading rq->nr_running == 0 at that point.
A build with -D_FORTIFY_SOURCE=2 enabled will produce the following warnings:
sysfs.c:63:30: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 255 [-Wformat-truncation=]
snprintf(filepath, 256, "%s/%s", path, filename);
^~
Bump up the buffer to PATH_MAX which is the limit and account for all of
the possible NUL and separators that could lead to exceeding the
allocated buffer sizes.
Fixes: e8658e3e2d63 ("tools/thermal: Introduce tmon, a tool for thermal subsystem") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the user can control the arguments of the ioctl() from the user
space, under special arguments that may result in a divide-by-zero bug
in:
drivers/video/fbdev/arkfb.c:784: ark_set_pixclock(info, (hdiv * info->var.pixclock) / hmul);
with hdiv=1, pixclock=1 and hmul=2 you end up with (1*1)/2 = (int) 0.
and then in:
drivers/video/fbdev/arkfb.c:504: rv = dac_set_freq(par->dac, 0, 1000000000 / pixclock);
we'll get a division-by-zero.
arch/x86/mm/numa.c: In function ‘cpumask_of_node’:
arch/x86/mm/numa.c:916:39: warning: the comparison will always evaluate as ‘false’ for the address of ‘node_to_cpumask_map’ will never be NULL [-Waddress]
916 | if (node_to_cpumask_map[node] == NULL) {
| ^~
node_to_cpumask_map is of type cpumask_var_t[].
When CONFIG_CPUMASK_OFFSTACK is set, cpumask_var_t is typedef'd to a
pointer for dynamic allocation, else to an array of one element. The
"wicked game" can be checked on line 700 of include/linux/cpumask.h.
The original code in debug_cpumask_set_cpu() and cpumask_of_node() were
probably written by the original authors with CONFIG_CPUMASK_OFFSTACK=y
(i.e. dynamic allocation) in mind, checking if the cpumask was available
via a direct NULL check.
When CONFIG_CPUMASK_OFFSTACK is not set, GCC gives the above warning
while compiling the kernel.
Fix that by using cpumask_available(), which does the NULL check when
CONFIG_CPUMASK_OFFSTACK is set, otherwise returns true. Use it wherever
such checks are made.
Conditional definitions of cpumask_available() can be found along with
the definition of cpumask_var_t. Check the cpumask.h reference mentioned
above.
With cgroup v2, the cpuset's cpus_allowed mask can be empty indicating
that the cpuset will just use the effective CPUs of its parent. So
cpuset_can_attach() can call task_can_attach() with an empty mask.
This can lead to cpumask_any_and() returns nr_cpu_ids causing the call
to dl_bw_of() to crash due to percpu value access of an out of bound
CPU value. For example:
Fix that by using effective_cpus instead. For cgroup v1, effective_cpus
is the same as cpus_allowed. For v2, effective_cpus is the real cpumask
to be used by tasks within the cpuset anyway.
Also update task_can_attach()'s 2nd argument name to cs_effective_cpus to
reflect the change. In addition, a check is added to task_can_attach()
to guard against the possibility that cpumask_any_and() may return a
value >= nr_cpu_ids.
Fixes: d7c5c8a758f2 ("sched/deadline: Fix bandwidth check/update when migrating tasks between exclusive cpusets") Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Link: https://lore.kernel.org/r/20220803015451.2219567-1-longman@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Both functions are doing almost the same, that is checking if admission
control is still respected.
With exclusive cpusets, dl_task_can_attach() checks if the destination
cpuset (i.e. its root domain) has enough CPU capacity to accommodate the
task.
dl_cpu_busy() checks if there is enough CPU capacity in the cpuset in
case the CPU is hot-plugged out.
dl_task_can_attach() is used to check if a task can be admitted while
dl_cpu_busy() is used to check if a CPU can be hotplugged out.
Make dl_cpu_busy() able to deal with a task and use it instead of
dl_task_can_attach() in task_can_attach().
Since commit ec79799c5a22 ("faddr2line: Fix overlapping text section
failures, the sequel"), faddr2line is completely broken on arm64.
For some reason, on arm64, the vmlinux ELF object file type is ET_DYN
rather than ET_EXEC. Check for both when determining whether the object
is vmlinux.
Modules and vmlinux.o have type ET_REL on all arches.
Fixes: ec79799c5a22 ("faddr2line: Fix overlapping text section failures, the sequel") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/dad1999737471b06d6188ce4cdb11329aa41682c.1658426357.git.jpoimboe@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The recent change to the PHB numbering logic has a logic error in the
handling of "ibm,opal-phbid".
When an "ibm,opal-phbid" property is present, &prop is written to and
ret is set to zero.
The following call to of_alias_get_id() is skipped because ret == 0.
But then the if (ret >= 0) is true, and the body of that if statement
sets prop = ret which throws away the value that was just read from
"ibm,opal-phbid".
Fix the logic by only doing the ret >= 0 check in the of_alias_get_id()
case.
Fixes: b614cf23313a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias") Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220802105723.1055178-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
It's possible that this kernel has been kexec'd from a kernel that
enabled bus lock detection, or (hypothetically) BIOS/firmware has set
DEBUGCTLMSR_BUS_LOCK_DETECT.
Disable bus lock detection explicitly if not wanted.
Fixes: b817401736f3 ("x86/traps: Handle #DB for bus lock") Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20220802033206.21333-1-chenyi.qiang@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
kernel_text_address() treats ftrace_trampoline, kprobe_insn_slot
and bpf_text_address as valid kprobe addresses - which is not ideal.
These text areas are removable and changeable without any notification
to kprobes, and probing on them can trigger unexpected behavior:
https://lkml.org/lkml/2022/7/26/1148
Considering that jump_label and static_call text are already
forbiden to probe, kernel_text_address() should be replaced with
core_kernel_text() and is_module_text_address() to check other text
areas which are unsafe to kprobe.
[ mingo: Rewrote the changelog. ]
Fixes: 83b8b035c5dc ("kprobes, extable: Identify kprobes trampolines as kernel text area") Fixes: c2d5f4374f26 ("bpf: make jited programs visible in traces") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20220801033719.228248-1-chenzhongjin@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
With the patch (c436ad9f4a2a0926 ("perf symbol: Correct address for bss
symbols")) I see lots of:
dso__load_sym_internal: failed to find program header for symbol:
Lorg/apache/fop/fo/FObj;bind(Lorg/apache/fop/fo/PropertyList;)V
st_value: 0x40
Fixes: c436ad9f4a2a0926 ("perf symbol: Correct address for bss symbols") Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20220731164923.691193-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
Add missing of_node_put() in the error path to avoid refcount leak.
Fixes: 532ae9ce60f7 ("[CELL] add support for MSI on Axon-based Cell systems") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220605065129.63906-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
of_find_node_by_path() returns a node pointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 7a69a82db40b ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220605053225.56125-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
of_find_node_by_path() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: ea5362f56619 ("[POWERPC] spufs: allow isolated mode apps by starting the SPE loader") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220603121543.22884-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If the inode has the compress flag, it will fail to use
'chattr -c +m' to remove its compress flag and tag no compress flag.
However, the same command will be successful when executed again,
as shown below:
$ touch foo.txt
$ chattr +c foo.txt
$ chattr -c +m foo.txt
chattr: Invalid argument while setting flags on foo.txt
$ chattr -c +m foo.txt
$ f2fs_io getflags foo.txt
get a flag on foo.txt ret=0, flags=nocompression,inline_data
Fix this by removing some checks in f2fs_setflags_common()
that do not affect the original logic. I go through all the
possible scenarios, and the results are as follows. Bold is
the only thing that has changed.
+---------------+-----------+-----------+----------+
| | file flags |
+ command +-----------+-----------+----------+
| | no flag | compr | nocompr |
+---------------+-----------+-----------+----------+
| chattr +c | compr | compr | -EINVAL |
| chattr -c | no flag | no flag | nocompr |
| chattr +m | nocompr | -EINVAL | nocompr |
| chattr -m | no flag | compr | no flag |
| chattr +c +m | -EINVAL | -EINVAL | -EINVAL |
| chattr +c -m | compr | compr | compr |
| chattr -c +m | nocompr | *nocompr* | nocompr |
| chattr -c -m | no flag | no flag | no flag |
+---------------+-----------+-----------+----------+
As result of commit 26ea42b4ff74 ("s390/smp: enable DAT before
CPU restart callback is called") the low-address protection bit
gets mistakenly unset in control register 0 save area of the
absolute zero memory. That area is used when manual PSW restart
happened to hit an offline CPU. In this case the low-address
protection for that CPU will be dropped.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Fixes: 26ea42b4ff74 ("s390/smp: enable DAT before CPU restart callback is called") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Macro mem_assign_absolute() is able to access the whole memory, but
is only used and makes sense when updating the absolute lowcore.
Instead, introduce get_abs_lowcore() and put_abs_lowcore() macros
that limit access to absolute lowcore addresses only.
Macro mem_assign_absolute() is used to initialize a target
CPU lowcore callback parameters. But despite the macro name
it writes to the absolute lowcore only if the target CPU is
offline. In case the CPU is online the macro does implicitly
write to the normal memory.
That behaviour is correct, but extremely subtle. Sacrifice
few program bits in favour of clarity and distinguish between
online vs offline CPUs and normal vs absolute lowcore pointer.
The LPUART can't distinguish between a break signal and a framing error,
so need to count the break characters if there is a framing error and
received data is zero instead of the parity error.
Fixes: ee10bc2bc733 ("serial: fsl_lpuart: handle break and make sysrq work") Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220725050115.12396-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Other Linux architectures use DT property 'linux,pci-domain' for
specifying fixed PCI domain of PCI controller specified in Device-Tree.
And lot of Freescale powerpc boards have defined numbered pci alias in
Device-Tree for every PCIe controller which number specify preferred PCI
domain.
So prefer usage of DT property 'linux,pci-domain' (via function
of_get_pci_domain_nr()) and DT pci alias (via function
of_alias_get_id()) on powerpc architecture for assigning PCI domain to
PCI controller.
Fixes: dd27a8d8aa3c ("powerpc/pci: Assign fixed PHB number based on device-tree properties") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220706102148.5060-2-pali@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The existing iommu_table_in_use() helper checks if the kernel is using
any of TCEs. There are some reserved TCEs:
1) the very first one if DMA window starts from 0 to avoid having a zero
but still valid DMA handle;
2) it_reserved_start..it_reserved_end to exclude MMIO32 window in case
the default window spans across that - this is the default for the first
DMA window on PowerNV.
When 1) is the case and 2) is not the helper does not skip 1) and returns
wrong status.
This only seems occurring when passing through a PCI device to a nested
guest (not something we support really well) so it has not been seen
before.
This fixes the bug by adding a special case for no MMIO32 reservation.
Commit 26a1dbbd8a3a ("powerpc: Allow CPU selection also on PPC32")
enlarged the CPU selection logic to PPC32 by removing depend to
PPC64, and failed to restrict that depend to E5500_CPU and E6500_CPU.
Fortunately that got unnoticed because -mcpu=8540 will override the
-mcpu=e500mc64 or -mpcu=e6500 as they are ealier, but that's
fragile and may no be right in the future.
Add back the depend PPC64 on E5500_CPU and E6500_CPU.
mark_initmem_nx() calls either mmu_mark_initmem_nx() or
set_memory_attr() based on return from v_block_mapped()
of _sinittext.
But we can now handle text and data independently, so that
text may be mapped by block even when data is mapped by pages.
On the 8xx for instance, at startup 32Mbytes of memory are
pinned in TLB. So the pinned entries need to go away for sinittext.
In next patch a BAT will be set to also covers sinittext on book3s/32.
So it will also be needed to call mmu_mark_initmem_nx() even when
data above sinittext is not mapped with BATs.
As this is highly dependent on the platform, call mmu_mark_initmem_nx()
regardless of data block mapping. Then the platform will know what to
do.
Modify 8xx mmu_mark_initmem_nx() so that inittext mapping is modified
only when pagealloc debug and kfence are not active, otherwise inittext
is mapped with standard pages. And don't do anything on kernel text
which is already mapped with PAGE_KERNEL_TEXT.
Disable end of block interrupt in case of wait for completion timeout
or errors to undo previously enable operation (done in
mchp_spdifrx_isr_blockend_en()). Otherwise we can end up with an
unbalanced reference counter for this interrupt.
In clcdfb_of_init_display(), we should call of_node_put() for the
references returned by of_graph_get_next_endpoint() and
of_graph_get_remote_port_parent() which have increased the refcount.
Besides, we should call of_node_put() both in fail path or when
the references are not used anymore.
Fixes: a9af11529700 ("video: ARM CLCD: Add DT support") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit d150e2068028 ("fuse: allow skipping control interface and forced
unmount") tries to remove the control interface for virtio-fs since it does
not support aborting requests which are being processed. But it doesn't
work now.
This patch fixes it by skipping creating the control interface if
fuse_conn->no_control is set.
There is a confusion with regard to the source address of
memcpy_real() and calling functions. While the declared
type for a source assumes a virtual address, in fact it
always called with physical address of the source.
This confusion led to bugs in copy_oldmem_kernel() and
copy_oldmem_user() functions, where __pa() macro applied
mistakenly to physical addresses. It does not lead to a
real issue, since virtual and physical addresses are
currently the same.
Fix both the bugs and memcpy_real() prototype by making
type of source address consistent to the function name
and the way it actually used.
Virtual addresses of vmcore_info and os_info members are
wrongly passed to copy_oldmem_kernel(), while the function
expects physical address of the source. Instead, __pa()
macro should have been applied.
Yet, use of __pa() macro could be somehow confusing, since
copy_oldmem_kernel() may treat the source as an offset, not
as a direct physical address (that depens from the oldmem
availability and location).
Fix the virtual vs physical address confusion and make the
way the old lowcore is read consistent across all sources.
Synthesized MMAP events have zero ino_generation, so do not compare
them to DSOs with a real ino_generation otherwise we end up with a DSO
without a build id.
Fixes: ceaa237406369b2d ("perf dso: Move dso_id from 'struct map' to 'struct dso'") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: kvm@vger.kernel.org Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220711093218.10967-2-adrian.hunter@intel.com
[ Added clarification to the comment from Ian + more detailed explanation from Adrian ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In qcom_iommu_has_secure_context(), we should call of_node_put()
for the reference 'child' when breaking out of for_each_child_of_node()
which will automatically increase and decrease the refcount.
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 1bf61f587955 ("mfd: max77620: Add core driver for MAX77620/MAX20024") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220601043222.64441-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
None of the in-tree instantiations of struct t7l66xb_platform_data
provides a disable callback. So better don't dereference this function
pointer unconditionally. As there is no user, drop it completely instead
of calling it conditional.
This is a preparation for making platform remove callbacks return void.
The SSCTL service comes up after a finite time when the remote Q6 comes
out of reset. Any graceful shutdowns requested during this period will
be a NOP and abrupt tearing down of the glink channel might lead to pending
transactions on the remote Q6 side and will ultimately lead to a fatal
error. Fix this by waiting for the SSCTL service when a graceful shutdown
is requested.
Client drivers need to check if coredump is enabled for the rproc before
continuing with coredump generation. This change adds a check in the PAS
driver.
Commit 85dc3bc2736b87 ("proc: Use a list of inodes to flush from proc")
moved proc_flush_task() behind __exit_signal(). Then, process systemd can
take long period high cpu usage during releasing task in following
concurrent processes:
Function d_invalidate() will remove dentry from hash firstly, but why does
proc_flush_pid() process dentry '/proc/tgid/fd' before dentry
'/proc/tgid'? That's because proc_pid_make_inode() adds proc inode in
reverse order by invoking hlist_add_head_rcu(). But proc should not add
any inodes under '/proc/tgid' except '/proc/tgid/task/pid', fix it by
adding inode into 'pid->inodes' only if the inode is /proc/tgid or
/proc/tgid/task/pid.
Performance regression:
Create 200 tasks, each task open one file for 50,000 times. Kill all
tasks when opened files exceed 10,000,000 (cat /proc/sys/fs/file-nr).
Before fix:
$ time killall -wq aa
real 4m40.946s # During this period, we can see 'ps' and 'systemd'
taking high cpu usage.
After fix:
$ time killall -wq aa
real 1m20.732s # During this period, we can see 'systemd' taking
high cpu usage.
Link: https://lkml.kernel.org/r/20220713130029.4133533-1-chengzhihao1@huawei.com Fixes: 85dc3bc2736b87 ("proc: Use a list of inodes to flush from proc") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216054 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Suggested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kfifo_to_user() macro is supposed to return zero for success or
negative error codes. Unfortunately, there is a signedness bug so it
returns unsigned int. This only affects callers which try to save the
result in ssize_t and as far as I can see the only place which does that
is line6_hwdep_read().
TL;DR: s/_uint/_int/.
Link: https://lkml.kernel.org/r/YrVL3OJVLlNhIMFs@kili Fixes: 77b8f66938e3 ("kfifo: fix kfifo_alloc() to return a signed int value") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Stefani Seibold <stefani@seibold.net> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is permissible for kernel code to call virt_to_phys() against virtual
addresses that are in KSEG0 or KSEG1 and we need to be dealing with both
types. Rewrite the test condition to ensure that the kernel virtual
addresses are above PAGE_OFFSET which they must be, and below KSEG2
where the non-linear mapping starts.
For EVA, there is not much that we can do given the linear address range
that is offered, so just return any virtual address as being valid.
Finally, when HIGHMEM is not enabled, all virtual addresses are assumed
to be valid as well.
Fixes: f6c79b8d8bc7 ("MIPS: Add support for CONFIG_DEBUG_VIRTUAL") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
An upcoming patch is going to require passing the client through
p9_req_put() -> p9_req_free(), but that's awkward with the kref
indirection - so this patch switches to using refcount_t directly.
Link: https://lkml.kernel.org/r/20220704014243.153050-1-kent.overstreet@gmail.com Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sohaib Mohamed started a serie of tiny and incomplete checkpatch fixes but
seemingly stopped halfway -- take over and do most of it.
This is still missing net/9p/trans* and net/9p/protocol.c for a later
time...
If iommu_device_register() fails in exynos_sysmmu_probe(), the previous
calls have to be cleaned up. In this case, the iommu_device_sysfs_add()
should be cleaned up, by calling its remove counterpart call.
Fixes: 2e3f523a7355 ("iommu/exynos: Make use of iommu_device_register interface") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220714165550.8884-3-semen.protsenko@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 63e0f239159d ("serial: 8250_bcm7271: UART errors after resuming
from S2") prevented an early enabling of RTS during resume, but it did
not actively restore the RTS state after resume.
In mt6359_parse_dt() and mt6359_accdet_parse_dt(), we should call
of_node_put() for the reference returned by of_get_child_by_name()
which has increased the refcount.
Fixes: e50f23f44fc1 ("ASoC: mt6359: fix failed to parse DT properties") Fixes: ad52183e6765 ("ASoC: mediatek: mt6359: add MT6359 accdet jack driver") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220713102013.367336-1-windhl@126.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the failure case of trying to use a buffer which we'd previously
failed to allocate, the "!mem" condition is no longer sufficient since
io_tlb_default_mem became static and assigned by default. Update the
condition to work as intended per the rest of that conversion.
Fixes: b0688e84e0ce ("swiotlb: Convert io_default_tlb_mem to static allocation") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The GIC user offset is mapped into every process' virtual address and is
therefore part of the hot-path of arch_setup_additional_pages(). Utilize
__pa() such that we are more optimal even when CONFIG_DEBUG_VIRTUAL is
enabled, and while at it utilize PFN_DOWN() instead of open-coding the
right shift by PAGE_SHIFT.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.3.3 defines the DM response. There exists
no DM command. However, the current implementation incorrectly sends DM as
command in case of unexpected UIH frames in gsm_queue().
Correct this behavior by always sending DM as response.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220707113223.3685-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.3 states that the valid range for the
maximum number of retransmissions (N2) is from 0 to 255 (both including).
gsm_dlci_t1() handles this number incorrectly by performing N2 - 1
retransmission attempts. Setting N2 to zero results in more than 255
retransmission attempts.
Fix gsm_dlci_t1() to comply with 3GPP 27.010.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220707113223.3685-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some Freescale 8250 implementations have the problem that a single long
break results in one irq per character frame time. The code in
fsl8250_handle_irq() that is supposed to handle that uses the BI bit in
lsr_saved_flags to detect such a situation and then skip the second
received character. However it also stores other error bits and so after
a single frame error the character received in the next irq handling is
passed to the upper layer with a frame error, too.
So after a spike on the data line (which is correctly recognized as a
frame error) the following valid character is thrown away, because the
driver reports a frame error for that one, too.
To weaken this problem restrict saving LSR to only the BI bit.
Note however that the handling is still broken:
- lsr_saved_flags is updated using orig_lsr which is the LSR content
for the first received char, but there might be more in the FIFO, so
a character is thrown away that is received later and not necessarily
the one following the break.
- The doubled break might be the 2nd and 3rd char in the FIFO, so the
workaround doesn't catch these, because serial8250_rx_chars() doesn't
handle the workaround.
- lsr_saved_flags might have set UART_LSR_BI at the entry of
fsl8250_handle_irq() which doesn't originate from
fsl8250_handle_irq()'s "up->lsr_saved_flags |= orig_lsr &
UART_LSR_BI;" but from e.g. from serial8250_tx_empty().
- For a long or a short break this isn't about two characters, but more
or only a single one.
The routine vfio_ccw_sch_event() is tasked with handling subchannel events,
specifically machine checks, on behalf of vfio-ccw. It correctly calls
cio_update_schib(), and if that fails (meaning the subchannel is gone)
it makes an FSM event call to mark the subchannel Not Operational.
If that worked, however, then it decides that if the FSM state was already
Not Operational (implying the subchannel just came back), then it should
simply change the FSM to partially- or fully-open.
Remove this trickery, since a subchannel returning will require more
probing than simply "oh all is well again" to ensure it works correctly.
Fixes: 14c50d87bb535 ("vfio: ccw: introduce a finite state machine") Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-4-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The wcnss_get_irq function is expected to return a value > 0 in the
event that an IRQ is succssfully obtained, but it instead returns 0.
This causes the stop and ready IRQs to never actually be used despite
being defined in the device-tree. This patch fixes that.
The DSD/PDM rate not only DSD64/128/256/512, which are the
multiple rate of 44.1kHz, but also support the multiple
rate of 8kHz, so can't force all mclk frequency to be
22579200Hz, need to assign the frequency according to
rate.
We should call of_node_put() for the reference 'dsp_of_node' returned by
of_parse_phandle() which will increase the refcount.
Fixes: 41d9a7422b1e ("ASoC: qcom: move ipq806x specific bits out of lpass driver.") Co-authored-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220702020109.263980-1-windhl@126.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Within gsm_activate_mux() all timers and locks are initiated before the
actual resource for the control channel is allocated. This can lead to race
conditions.
Allocate the control channel DLCI object first to avoid race conditions.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701122332.2039-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function may be used by the user directly and also by the n_gsm
internal functions. They can lead into a race condition which results in
interleaved frames if both are writing at the same time. The receiving side
is not able to decode those interleaved frames correctly.
Add a lock around the low side tty write to avoid race conditions and frame
interleaving between user originated writes and n_gsm writes.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-9-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the current implementation control packets are re-transmitted even if
the control channel closed down during T2. This is wrong.
Check whether the control channel is open before re-transmitting any
packets. Note that control channel open/close is handled by T1 and not T2
and remains unaffected by this.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.6 states that FCoff stops the
transmission on all channels except the control channel. This is already
implemented in gsm_data_kick(). However, chapter 5.4.8.1 explains that this
shall result in the same behavior as software flow control on the ldisc in
advanced option mode. That means only flow control frames shall be sent
during flow off. The current implementation does not consider this case.
Change gsm_data_kick() to send only flow control frames if constipated to
abide the standard. gsm_read_ea_val() and gsm_is_flow_ctrl_msg() are
introduced as helper functions for this.
It is planned to use gsm_read_ea_val() in later code cleanups for other
functions, too.
Fixes: 9fd6525027a3 ("n_gsm : Flow control handling in Mux driver") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementation does not handle the situation that no data is in
the internal queue and needs to be sent out while the user tty fifo is
full.
Add a timer that moves more data from user tty down to the internal queue
which is then serialized on the ldisc. This timer is triggered if no data
was moved from a user tty to the internal queue within 10 * T1.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1) The function drains the fifo for the given user tty/DLCI without
considering 'TX_THRESH_HI' and different to gsm_dlci_data_output_framed(),
which moves only one packet from the user side to the internal transmission
queue. We can only handle one packet at a time here if we want to allow
DLCI priority handling in gsm_dlci_data_sweep() to avoid link starvation.
2) Furthermore, the additional header octet from convergence layer type 2
is not counted against MTU. It is part of the UI/UIH frame message which
needs to be limited to MTU. Hence, it is wrong not to consider this octet.
3) Finally, the waiting user tty is not informed about freed space in its
send queue.
Take at most one packet worth of data out of the DLCI fifo to fix 1).
Limit the max user data size per packet to MTU - 1 in case of convergence
layer type 2 to leave space for the control signal octet which is added in
the later part of the function. This fixes 2).
Add tty_port_tty_wakeup() to wake up the user tty if new write space has
been made available to fix 3).
The current implementation registers/deregisters the user ttys at mux
attach/detach. That means that the user devices are available before any
control channel is open. However, user channel initialization requires an
open control channel. Furthermore, the user is not informed if the mux
restarts due to configuration changes.
Put the registration/deregistration procedure into separate function to
improve readability.
Move registration to mux activation and deregistration to mux cleanup to
keep the user devices only open as long as a control channel exists. The
user will be informed via the device driver if the mux was reconfigured in
a way that required a mux re-activation.
This makes it necessary to add T2 initialization to gsmld_open() for the
ldisc open code path (not the reconfiguration code path) to avoid deletion
of an uninitialized T2 at mux cleanup.
Fixes: bee16e52a3cf ("tty: n_gsm: expose gsmtty device nodes at ldisc open time") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After setting up the control channel on both sides the responder side may
want to open a virtual tty to listen on until the initiator starts an
application on a user channel. The current implementation allows the
open() but no other operation, like termios. These fail with EINVAL.
The responder sided application has no means to detect an open by the
initiator sided application this way. And the initiator sided applications
usually expect the responder sided application to listen on the user
channel upon open.
Set the user channel into half-open state on responder side once a user
application opens the virtual tty to allow IO operations on it.
Furthermore, keep the user channel constipated until the initiator side
opens it to give the responder sided application the chance to detect the
new connection and to avoid data loss if the responder sided application
starts sending before the user channel is open.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
sparse reports
sound/soc/samsung/rx1950_uda1380.c:131:18: warning: symbol 'gpiod_speaker_power' was not declared. Should it be static?
sound/soc/samsung/rx1950_uda1380.c:231:24: warning: symbol 'rx1950_audio' was not declared. Should it be static?
Both gpiod_speaker_power and rx1950_audio are only used in rx1950_uda1380.c,
so their storage class specifiers should be static.
Fixes: 873be31a6e71 ("ASoC: samsung: rx1950: turn into platform driver") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220629185345.910406-1-trix@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit da9049cf0109 ("powerpc/perf: Fix PMU callbacks to clear
pending PMI before resetting an overflown PMC") added a new
function "pmi_irq_pending" in hw_irq.h. This function is to check
if there is a PMI marked as pending in Paca (PACA_IRQ_PMI).This is
used in power_pmu_disable in a WARN_ON. The intention here is to
provide a warning if there is PMI pending, but no counter is found
overflown.
During some of the perf runs, below warning is hit:
This means that there is no PMC overflown among the active events
in the PMU, but there is a PMU pending in Paca. The function
"any_pmc_overflown" checks the PMCs on active events in
cpuhw->n_events. Code snippet:
<<>>
if (any_pmc_overflown(cpuhw))
clear_pmi_irq_pending();
else
WARN_ON(pmi_irq_pending());
<<>>
Here the PMC overflown is not from active event. Example: When we do
perf record, default cycles and instructions will be running on PMC6
and PMC5 respectively. It could happen that overflowed event is currently
not active and pending PMI is for the inactive event. Debug logs from
trace_printk:
<<>>
any_pmc_overflown: idx is 5: pmc value is 0xd9a
power_pmu_disable: PMC1: 0x0, PMC2: 0x0, PMC3: 0x0, PMC4: 0x0, PMC5: 0xd9a, PMC6: 0x80002011
<<>>
Here active PMC (from idx) is PMC5 , but overflown PMC is PMC6(0x80002011).
When we handle PMI interrupt for such cases, if the PMC overflown is
from inactive event, it will be ignored. Reference commit:
commit 9651d67001ac ("powerpc/perf: Fix finding overflowed PMC in interrupt")
Patch addresses two changes:
1) Fix 1 : Removal of warning ( WARN_ON(pmi_irq_pending()); )
We were printing warning if no PMC is found overflown among active PMU
events, but PMI pending in PACA. But this could happen in cases where
PMC overflown is not in active PMC. An inactive event could have caused
the overflow. Hence the warning is not needed. To know pending PMI is
from an inactive event, we need to loop through all PMC's which will
cause more SPR reads via mfspr and increase in context switch. Also in
existing function: perf_event_interrupt, already we ignore PMI's
overflown when it is from an inactive PMC.
2) Fix 2: optimization in clearing pending PMI.
Currently we check for any active PMC overflown before clearing PMI
pending in Paca. This is causing additional SPR read also. From point 1,
we know that if PMI pending in Paca from inactive cases, that is going
to be ignored during replay. Hence if there is pending PMI in Paca, just
clear it irrespective of PMC overflown or not.
In summary, remove the any_pmc_overflown check entirely in
power_pmu_disable. ie If there is a pending PMI in Paca, clear it, since
we are in pmu_disable. There could be cases where PMI is pending because
of inactive PMC ( which later when replayed also will get ignored ), so
WARN_ON could give false warning. Hence removing it.
Fixes: da9049cf0109 ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220522142256.24699-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
This function has two paths missing of_node_put().
b00577cd7b2f ("profiling: fix shift-out-of-bounds bugs") limits shift
value by [0, BITS_PER_LONG -1], which means [0, 63].
However, syzbot found that the max shift value should be the bit number of
(_etext - _stext). If shift is outside of this, the "buffer_bytes" will
be zero and will cause kzalloc(0). Then the kernel panics due to
dereferencing the returned pointer 16.
This can be easily reproduced by passing a large number like 60 to enable
profiling and then run readprofile.
projects / kernel.git / log