We currently do an explicit flush of the buffer pools within the call path
of drm_driver.release(); this removes all buffers, regardless of their age,
freeing the buffers' associated resources (objects, address space areas).
However there is other code that runs within the drm_driver.release() call
chain that expects objects and their associated address space areas have
already been flushed.
Since buffer pools auto-flush old buffers once per second in a worker
thread, there's a small window where if we remove the driver while there
are still objects in buffers with an age of less than one second, the
assumptions of the other release code may be violated.
By moving the flush to driver remove (which executes earlier via the
pci_driver.remove() flow) we're ensuring that all buffers are flushed and
their associated objects freed before some other code in
pci_driver.remove() flushes those objects so they are released before
_any_ code in drm_driver.release() that check completness of those
flushes executes.
v2: Reword commit description as suggested by Matt.
In commit 3626304b895e ("drm/i915: Drop i915_request.lock requirement
for intel_rps_boost()"), we decoupled the rps worker from the pm so
that we could avoid the synchronization penalty which makes the
assertion liable to run too early. Which makes warning invalid hence
removed.
it looks THP + shmem_writeback was an unexpected combination, and ends up
hitting some BUG_ON, but it also looks like that is now fixed.
While the IGTs did eventually hit this(although not during pre-merge it
seems), it's likely worthwhile adding some explicit coverage for this
scenario in the shrink_thp selftest.
Matthew Auld [Tue, 21 Sep 2021 13:42:02 +0000 (14:42 +0100)]
drm/i915/request: fix early tracepoints
Currently we blow up in trace_dma_fence_init, when calling into
get_driver_name or get_timeline_name, since both the engine and context
might be NULL(or contain some garbage address) in the case of newly
allocated slab objects via the request ctor. Note that we also use
SLAB_TYPESAFE_BY_RCU here, which allows requests to be immediately
freed, but delay freeing the underlying page by an RCU grace period.
With this scheme requests can be re-allocated, at the same time as they
are also being read by some lockless RCU lookup mechanism.
In the ctor case, which is only called for new slab objects(i.e allocate
new page and call the ctor for each object) it's safe to reset the
context/engine prior to calling into dma_fence_init, since we can be
certain that no one is doing an RCU lookup which might depend on peeking
at the engine/context, like in active_engine(), since the object can't
yet be externally visible.
In the recycled case(which might also be externally visible) the request
refcount always transitions from 0->1 after we set the context/engine
etc, which should ensure it's valid to dereference the engine for
example, when doing an RCU list-walk, so long as we can also increment
the refcount first. If the refcount is already zero, then the request is
considered complete/released. If it's non-zero, then the request might
be in the process of being re-allocated, or potentially still in flight,
however after successfully incrementing the refcount, it's possible to
carefully inspect the request state, to determine if the request is
still what we were looking for. Note that all externally visible
requests returned to the cache must have zero refcount.
One possible fix then is to move dma_fence_init out from the request
ctor. Originally this was how it was done, but it was moved in:
drm/i915: Do not share hwsp across contexts any more, v8.
intel_timeline_get_seqno() could also be cleaned up slightly by dropping
the request argument.
Moving dma_fence_init back out of the ctor, should ensure we have enough
of the request initialised in case of trace_dma_fence_init.
Functionally this should be the same, and is effectively what we were
already open coding before, except now we also assign the fence->lock
and fence->ops, but since these are invariant for recycled
requests(which might be externally visible), and will therefore already
hold the same value, it shouldn't matter.
An alternative fix, since we don't yet have a fully initialised request
when in the ctor, is just setting the context/engine as NULL, but this
does require adding some extra handling in get_driver_name etc.
v2(Daniel):
- Try to make the commit message less confusing
Thomas Hellström [Wed, 22 Sep 2021 06:25:25 +0000 (08:25 +0200)]
drm/i915: Reduce the number of objects subject to memcpy recover
We really only need memcpy restore for objects that affect the
operability of the migrate context. That is, primarily the page-table
objects of the migrate VM.
Add an object flag, I915_BO_ALLOC_PM_EARLY for objects that need early
restores using memcpy and a way to assign LMEM page-table object flags
to be used by the vms.
Restore objects without this flag with the gpu blitter and only objects
carrying the flag using TTM memcpy.
Initially mark the migrate, gt, gtt and vgpu vms to use this flag, and
defer for a later audit which vms actually need it. Most importantly, user-
allocated vms with pinned page-table objects can be restored using the
blitter.
Performance-wise memcpy restore is probably as fast as gpu restore if not
faster, but using gpu restore will help tackling future restrictions in
mappable LMEM size.
v4:
- Don't mark the aliasing ppgtt page table flags for early resume, but
rather the ggtt page table flags as intended. (Matthew Auld)
- The check for user buffer objects during early resume is pointless, since
they are never marked I915_BO_ALLOC_PM_EARLY. (Matthew Auld)
v5:
- Mark GuC LMEM objects with I915_BO_ALLOC_PM_EARLY to have them restored
before we fire up the migrate context.
Thomas Hellström [Wed, 22 Sep 2021 06:25:24 +0000 (08:25 +0200)]
drm/i915: Don't back up pinned LMEM context images and rings during suspend
Pinned context images are now reset during resume. Don't back them up,
and assuming that rings can be assumed empty at suspend, don't back them
up either.
Introduce a new object flag, I915_BO_ALLOC_PM_VOLATILE meaning that an
object is allowed to lose its content on suspend.
Thomas Hellström [Wed, 22 Sep 2021 06:25:23 +0000 (08:25 +0200)]
drm/i915/gt: Register the migrate contexts with their engines
Pinned contexts, like the migrate contexts need reset after resume
since their context image may have been lost. Also the GuC needs to
register pinned contexts.
Add a list to struct intel_engine_cs where we add all pinned contexts on
creation, and traverse that list at resume time to reset the pinned
contexts.
This fixes the kms_pipe_crc_basic@suspend-read-crc-pipe-a selftest for now,
but proper LMEM backup / restore is needed for full suspend functionality.
However, note that even with full LMEM backup / restore it may be
desirable to keep the reset since backing up the migrate context images
must happen using memcpy() after the migrate context has become inactive,
and for performance- and other reasons we want to avoid memcpy() from
LMEM.
Also traverse the list at guc_init_lrc_mapping() calling
guc_kernel_context_pin() for the pinned contexts, like is already done
for the kernel context.
v2:
- Don't reset the contexts on each __engine_unpark() but rather at
resume time (Chris Wilson).
v3:
- Reset contexts in the engine sanitize callback. (Chris Wilson)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Brost Matthew <matthew.brost@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-6-thomas.hellstrom@linux.intel.com
Thomas Hellström [Wed, 22 Sep 2021 06:25:22 +0000 (08:25 +0200)]
drm/i915 Implement LMEM backup and restore for suspend / resume
Just evict unpinned objects to system. For pinned LMEM objects,
make a backup system object and blit the contents to that.
Backup is performed in three steps,
1: Opportunistically evict evictable objects using the gpu blitter.
2: After gt idle, evict evictable objects using the gpu blitter. This will
be modified in an upcoming patch to backup pinned objects that are not used
by the blitter itself.
3: Backup remaining pinned objects using memcpy.
Also move uC suspend to after 2) to make sure we have a functional GuC
during 2) if using GuC submission.
v2:
- Major refactor to make sure gem_exec_suspend@hang-SX subtests work, and
suspend / resume works with a slightly modified GuC submission enabling
patch series.
v3:
- Fix a potential use-after-free (Matthew Auld)
- Use i915_gem_object_create_shmem() instead of
i915_gem_object_create_region (Matthew Auld)
- Minor simplifications (Matthew Auld)
- Fix up kerneldoc for i195_ttm_restore_region().
- Final lmem_suspend() call moved to i915_gem_backup_suspend from
i915_gem_suspend_late, since the latter gets called at driver unload
and we don't unnecessarily want to run it at that time.
v4:
- Interface change of ttm- & lmem suspend / resume functions to use
flags rather than bools. (Matthew Auld)
- Completely drop the i915_gem_backup_suspend change (Matthew Auld)
Thomas Hellström [Wed, 22 Sep 2021 06:25:21 +0000 (08:25 +0200)]
drm/i915/gt: Increase suspend timeout
With GuC submission on DG1, the execution of the requests times out
for the gem_exec_suspend igt test case after executing around 800-900
of 1000 submitted requests.
Given the time we allow elsewhere for fences to signal (in the order of
seconds), increase the timeout before we mark the gt wedged and proceed.
Thomas Hellström [Wed, 22 Sep 2021 06:25:20 +0000 (08:25 +0200)]
drm/i915/gem: Implement a function to process all gem objects of a region
An upcoming common pattern is to traverse the region object list and
perform certain actions on all objects in a region. It's a little tricky
to get the list locking right, in particular since a gem object may
change region unless it's pinned or the object lock is held.
Define a function that does this for us and that takes an argument that
defines the action to be performed on each object.
v3:
- Improve structure documentation a bit (Matthew Auld)
Thomas Hellström [Wed, 22 Sep 2021 06:25:19 +0000 (08:25 +0200)]
drm/i915/ttm: Implement a function to copy the contents of two TTM-based objects
When backing up or restoring contents of pinned objects at suspend /
resume time we need to allocate a new object as the backup. Add a function
to facilitate copies between the two. Some data needs to be copied before
the migration context is ready for operation, so make sure we can
disable accelerated copies.
v2:
- Fix a missing return value check (Matthew Auld)
drm/i915/guc, docs: Fix pdfdocs build error by removing nested grid
Nested grids in grid-table cells are not specified as proper ReST
constructs.
Commit c30eb9422c50 ("drm/i915/guc: Update firmware to v62.0.0")
added a couple of kerneldoc tables of the form:
For "make htmldocs", they happen to work as one might expect,
but they are incompatible with "make latexdocs" and "make pdfdocs",
and cause the generated gpu.tex file to become incomplete and
unbuildable by xelatex.
Restore the compatibility by removing those nested grids in the tables.
Matt Roper [Thu, 23 Sep 2021 00:30:29 +0000 (17:30 -0700)]
drm/i915/uncore: fwtable read handlers are now used on all forcewake platforms
With the recent refactor of the uncore mmio handling, all
forcewake-based platforms (i.e., graphics version 6 and beyond) now use
the 'fwtable' read handlers. Let's pull the assignment out of the
per-platform if/else ladder to make this more obvious.
drm/i915/debugfs: Do not report currently active engine when describing objects
It is not very useful to have code which tries to report a rapidly
transient state which will not report anything majority of the time,
especially since it is currently only used from
<debugfs>/i915_gem_framebuffers.
We thought the DG2 table of shadowed registers would be the same as the
gen12/xehp table, but it turns out that there are a few minor
differences that require us to define a new DG2-specific table:
* One register is removed (0xC4D4)
* One register is added (0xC4E0)
Matt Roper [Fri, 10 Sep 2021 20:10:29 +0000 (13:10 -0700)]
drm/i915/uncore: Drop gen11 mmio read handlers
Consolidate down to just a single 'fwtable' implementation. For reads
we don't need to worry about shadow tables.
While consolidating the functions, gen11/gen12 pick up a
NEEDS_FORCE_WAKE() check that they didn't have before, allowing them to
bypass a lot of forcewake/shadow checking for non-GT registers (e.g.,
display).
Matt Roper [Fri, 10 Sep 2021 20:10:28 +0000 (13:10 -0700)]
drm/i915/uncore: Drop gen11/gen12 mmio write handlers
Now that the reference to the shadow table is stored within the uncore,
we don't need to generate separate fwtable, gen11_fwtable, and
gen12_fwtable variants of the register write functions; a single
'fwtable' implementation will work for all of those platforms now.
While consolidating the functions, gen11/gen12 pick up a
NEEDS_FORCE_WAKE() check that they didn't have before, allowing them to
bypass a lot of forcewake/shadow checking for non-GT registers (e.g.,
display). However since these later platforms also introduce media
engines at higher MMIO offsets, the definition of NEEDS_FORCE_WAKE() is
extended to also consider register offsets above GEN11_BSD_RING_BASE.
v2:
- Restore NEEDS_FORCE_WAKE(), but extend it for compatibility with the
gen11+ platforms by also passing offsets above GEN11_BSD_RING_BASE.
(Chris, Tvrtko)
Matt Roper [Fri, 10 Sep 2021 20:10:27 +0000 (13:10 -0700)]
drm/i915/uncore: Replace gen8 write functions with general fwtable
Now that we have both a standard forcewake table (albeit a single-entry
table) and the shadow table stored in the uncore, we can drop the
gen8-specific write handlers in favor of the general fwtable version.
Matt Roper [Fri, 10 Sep 2021 20:10:26 +0000 (13:10 -0700)]
drm/i915/uncore: Associate shadow table with uncore
Store a reference to a platform's shadow table inside the uncore, the
same as we do with the forcewake table. This will allow us to use a
single set of functions that operate on the shadow table reference
rather than generating lots of nearly-identical functions via macros
that differ only in terms of the table that they reference.
Matt Roper [Fri, 10 Sep 2021 20:10:25 +0000 (13:10 -0700)]
drm/i915/uncore: Convert gen6/gen7 read operations to fwtable
On gen6-gen8 (except vlv/chv) we don't use a forcewake lookup table; we
simply check whether the register offset is < 0x40000, and return
FORCEWAKE_RENDER if it is. To prepare for upcoming refactoring, let's
define a single-entry forcewake table from [0x0, 0x3ffff] and switch
these platforms over to use the fwtable reader functions.
v2:
- Drop __gen6_reg_read_fw_domains which is no longer used. (Tvrtko)
Matt Roper [Fri, 17 Sep 2021 16:12:03 +0000 (09:12 -0700)]
drm/i915: Check SFC fusing before recording/dumping SFC_DONE
On Xe_HP and beyond the SFC unit may be fused off, even if the
corresponding media engines are present. Check the SFC-specific fusing
before trying to dump the SFC_DONE instances.
Matt Roper [Fri, 17 Sep 2021 16:12:02 +0000 (09:12 -0700)]
drm/i915/xehp: Check new fuse bits for SFC availability
Xe_HP adds some new bits to the FUSE1 register to let us know whether a
given SFC unit is present. We should take this into account while
initializing SFC availability to our VCS and VECS engines.
While we're at it, update the FUSE1 register definition to use
REG_GENMASK / REG_FIELD_GET notation.
Note that, the bspec confusingly names the fuse bits "disable" despite
the register reflecting the *enable* status of the SFC units. The
original architecture documents which the bspec is based on do properly
name this field "SFC_ENABLE."
drm/i915/guc: put all guc objects in lmem when available
The firmware binary has to be loaded from lmem and the recommendation is
to put all other objects in there as well. Note that we don't fall back
to system memory if the allocation in lmem fails because all objects are
allocated during driver load and if we have issues with lmem at that point
something is seriously wrong with the system, so no point in trying to
handle it.
Cc: Matthew Auld <matthew.auld@intel.com> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210916162819.27848-3-matthew.brost@intel.com
Support for multiple GT's within a single i915 device will be arriving
soon. Since each GT may have its own fusing and require different
workarounds, we need to make the GT workaround functions and multicast
steering setup per-gt.
Lucas De Marchi [Sat, 18 Sep 2021 02:57:54 +0000 (19:57 -0700)]
drm/i915: deduplicate frequency dump on debugfs
Although commit c6c4e0dcb5a1 ("drm/i915/gt: Move pm debug files into a
gt aware debugfs") says it was moving debug files to gt/, the
i915_frequency_info file was left behind and its implementation copied
into drivers/gpu/drm/i915/gt/debugfs_gt_pm.c. Over time we had several
patches having to change both places to keep them in sync (and some
patches failing to do so). The initial idea was to remove
i915_frequency_info, but there are user space tools using it. From a
quick code search there are other scripts and test tools besides igt, so
it's not simply updating igt to get rid of the older file.
Here we export a function using drm_printer as parameter and make
both show() implementations to call this same function. Aside from a few
variable name differences, for i915_frequency_info this brings a few
lines that were not previously printed: RP UP EI, RP UP THRESHOLD, RP
DOWN THRESHOLD and RP DOWN EI. These came in as part of
commit 35df432563d6 ("drm/i915/gt: Use the RPM config register to
determine clk frequencies"), which didn't change both places.
Lucas De Marchi [Sat, 18 Sep 2021 02:57:53 +0000 (19:57 -0700)]
drm/i915: rename debugfs_gt_pm files
We shouldn't be using debugfs_ namespace for this functionality. Rename
debugfs_gt_pm.[ch] to intel_gt_pm_debugfs.[ch] and then make
functions, defines and structs follow suit.
Lucas De Marchi [Sat, 18 Sep 2021 02:57:52 +0000 (19:57 -0700)]
drm/i915: rename debugfs_engines files
We shouldn't be using debugfs_ namespace for this functionality. Rename
debugfs_engines.[ch] to intel_gt_engines_debugfs.[ch] and then make
functions, defines and structs follow suit.
Lucas De Marchi [Sat, 18 Sep 2021 02:57:51 +0000 (19:57 -0700)]
drm/i915: rename debugfs_gt files
We shouldn't be using debugfs_ namespace for this functionality. Rename
debugfs_gt.[ch] to intel_gt_debugfs.[ch] and then make functions,
defines and structs follow suit.
While at it and since we are renaming the header, sort the includes
alphabetically.
Fixing eviction to nest into ww_class_acquire is a high priority, but
it requires a rework of the entire driver, which can only be done one
step at a time.
As an intermediate solution, add an acquire context to
ww_mutex_trylock, which allows us to do proper nesting annotations on
the trylocks, making the above lockdep splat disappear.
This is also useful in regulator_lock_nested, which may avoid dropping
regulator_nesting_mutex in the uncontended path, so use it there.
TTM may be another user for this, where we could lock a buffer in a
fastpath with list locks held, without dropping all locks we hold.
drm/i915: Move __i915_gem_free_object to ttm_bo_destroy
When we implement delayed destroy, we may have a second
call to the delete_mem_notify() handler, while free_object()
only should be called once.
Move it to bo->destroy(), to ensure it's only called once.
This fixes some weird memory corruption issues with delayed
destroy when async eviction is used.
drm/i915: Mark GPU wedging on driver unregister unrecoverable
GPU wedged flag now set on driver unregister to prevent from further
using the GPU can be then cleared unintentionally when calling
__intel_gt_unset_wedged() still before the flag is finally marked
unrecoverable. We need to have it marked unrecoverable earlier.
Implement that by replacing a call to intel_gt_set_wedged() in
intel_gt_driver_unregister() with intel_gt_set_wedged_on_fini().
With the above in place, intel_gt_set_wedged_on_fini() is now called
twice on driver remove, second time from __intel_gt_disable(). This
seems harmless, while dropping intel_gt_set_wedged_on_fini() from
__intel_gt_disable() proved to break some driver probe error unwind
paths as well as mock selftest exit path.
drm/i915: Add mmap lock around vma_lookup() in the mman selftest.
Add mmap_read_lock/unlock around vma_lookup(). The core code requires
this for lookups. Since we only check if the return value is NULL,
we can immediately unlock.
Lucas De Marchi [Sat, 4 Sep 2021 00:35:43 +0000 (17:35 -0700)]
drm/i915/xehpsdv: Define MOCS table for XeHP SDV
Like DG1, XeHP SDV doesn't have LLC/eDRAM control values due to being a
dgfx card. XeHP SDV adds 2 more bits: L3_GLBGO to "push the Go point to
memory for L3 destined transaction" and L3_LKP to "enable Lookup for
uncacheable accesses".
Bspec: 45101 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210904003544.2422282-2-matthew.d.roper@intel.com
This warning helps catch uninitialized variables. It should have been
enabled at the same time as commit bdbff7e2f975 ("drm/i915: Enable
-Wuninitialized") but I did not realize they were disabled separately.
Enable it now that i915 is clean so that it stays that way.
drm/i915/selftests: Always initialize err in igt_dmabuf_import_same_driver_lmem()
Clang warns:
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:127:13: warning:
variable 'err' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
} else if (PTR_ERR(import) != -EOPNOTSUPP) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:138:9: note:
uninitialized use occurs here
return err;
^~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:127:9: note: remove
the 'if' if its condition is always true
} else if (PTR_ERR(import) != -EOPNOTSUPP) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:95:9: note:
initialize the variable 'err' to silence this warning
int err;
^
= 0
The test is expected to pass if i915_gem_prime_import() returns
-EOPNOTSUPP so initialize err to zero in this case.
Fixes: 456d9605a14a ("drm/i915/gem: Migrate to system at dma-buf attach time (v7)") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-3-nathan@kernel.org
drm/i915/selftests: Do not use import_obj uninitialized
Clang warns a couple of times:
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:63:6: warning:
variable 'import_obj' is used uninitialized whenever 'if' condition is
true [-Wsometimes-uninitialized]
if (import != &obj->base) {
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:80:22: note:
uninitialized use occurs here
i915_gem_object_put(import_obj);
^~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:63:2: note: remove
the 'if' if its condition is always false
if (import != &obj->base) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:38:46: note:
initialize the variable 'import_obj' to silence this warning
struct drm_i915_gem_object *obj, *import_obj;
^
= NULL
Shuffle the import_obj initialization above these if statements so that
it is not used uninitialized.
Fixes: c187f1ef7294 ("drm/i915/gem: Correct the locking and pin pattern for dma-buf (v8)") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-2-nathan@kernel.org
Matthew Brost [Thu, 9 Sep 2021 16:47:44 +0000 (09:47 -0700)]
drm/i915/guc: Add GuC kernel doc
Add GuC kernel doc for all structures added thus far for GuC submission
and update the main GuC submission section with the new interface
details.
v2:
- Drop guc_active.lock DOC
v3:
- Fixup a few kernel doc comments (Daniele)
v4 (Daniele):
- Implement doc suggestions from John
- Add kerneldoc for all members of the GuC structure and pull the file
in i915.rst
v5 (Daniele):
- Implement new doc suggestions from John
Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-24-matthew.brost@intel.com
Matthew Brost [Thu, 9 Sep 2021 16:47:43 +0000 (09:47 -0700)]
drm/i915/guc: Drop guc_active move everything into guc_state
Now that we have locking hierarchy of sched_engine->lock ->
ce->guc_state everything from guc_active can be moved into guc_state and
protected the guc_state.lock.
Matthew Brost [Thu, 9 Sep 2021 16:47:41 +0000 (09:47 -0700)]
drm/i915/guc: Move GuC priority fields in context under guc_active
Move GuC management fields in context under guc_active struct as this is
where the lock that protects theses fields lives. Also only set guc_prio
field once during context init.
Matthew Brost [Thu, 9 Sep 2021 16:47:40 +0000 (09:47 -0700)]
drm/i915/guc: Drop pin count check trick between sched_disable and re-pin
Drop pin count check trick between a sched_disable and re-pin, now rely
on the lock and counter of the number of committed requests to determine
if scheduling should be disabled on the context.
Matthew Brost [Thu, 9 Sep 2021 16:47:38 +0000 (09:47 -0700)]
drm/i915/guc: Rework and simplify locking
Rework and simplify the locking with GuC subission. Drop
sched_state_no_lock and move all fields under the guc_state.sched_state
and protect all these fields with guc_state.lock . This requires
changing the locking hierarchy from guc_state.lock -> sched_engine.lock
to sched_engine.lock -> guc_state.lock.
v2:
(Daniele)
- Don't check fields outside of lock during sched disable, check less
fields within lock as some of the outside are no longer needed
Matthew Brost [Thu, 9 Sep 2021 16:47:36 +0000 (09:47 -0700)]
drm/i915/guc: Release submit fence from an irq_work
A subsequent patch will flip the locking hierarchy from
ce->guc_state.lock -> sched_engine->lock to sched_engine->lock ->
ce->guc_state.lock. As such we need to release the submit fence for a
request from an IRQ to break a lock inversion - i.e. the fence must be
release went holding ce->guc_state.lock and the releasing of the can
acquire sched_engine->lock.
v2:
(Daniele)
- Delete request from list before calling irq_work_queue
Matthew Brost [Thu, 9 Sep 2021 16:47:34 +0000 (09:47 -0700)]
drm/i915/guc: Don't touch guc_state.sched_state without a lock
Before we did some clever tricks to not use the a lock when touching
guc_state.sched_state in certain cases. Don't do that, enforce the use
of the lock.
v2:
(kernel test robo )
- Add __maybe_unused to sched_state_is_init()
v3: rebase after the unused code path removal has been moved to an
earlier patch.
Matthew Brost [Thu, 9 Sep 2021 16:47:32 +0000 (09:47 -0700)]
drm/i915/selftests: Add initial GuC selftest for scrubbing lost G2H
While debugging an issue with full GT resets I went down a rabbit hole
thinking the scrubbing of lost G2H wasn't working correctly. This proved
to be incorrect as this was working just fine but this chase inspired me
to write a selftest to prove that this works. This simple selftest
injects errors dropping various G2H and then issues a full GT reset
proving that the scrubbing of these G2H doesn't blow up.
v2:
(Daniel Vetter)
- Use ifdef instead of macros for selftests
v3:
(Checkpatch)
- A space after 'switch' statement
v4:
(Daniele)
- A comment saying GT won't idle if G2H are lost
Matthew Brost [Thu, 9 Sep 2021 16:47:31 +0000 (09:47 -0700)]
drm/i915/guc: Copy whole golden context, set engine state size of subset
When the GuC does a media reset, it copies a golden context state back
into the corrupted context's state. The address of the golden context
and the size of the engine state restore are passed in via the GuC ADS.
The i915 had a bug where it passed in the whole size of the golden
context, not the size of the engine state to restore resulting in a
memory corruption.
Also copy the entire golden context on init rather than just the engine
state that is restored.
v2 (Daniele): use defines to avoid duplicated const variables (John).
Fixes: 5d0ff731bbbe ("drm/i915/guc: Add golden context to GuC ADS") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-11-matthew.brost@intel.com
Matthew Brost [Thu, 9 Sep 2021 16:47:29 +0000 (09:47 -0700)]
drm/i915/guc: Kick tasklet after queuing a request
Kick tasklet after queuing a request so it submitted in a timely manner.
Fixes: 750a049f8ce3 ("drm/i915/guc: Implement GuC context operations for new inteface") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-9-matthew.brost@intel.com
Matthew Brost [Thu, 9 Sep 2021 16:47:28 +0000 (09:47 -0700)]
Revert "drm/i915/gt: Propagate change in error status to children on unhold"
Propagating errors to dependent fences is broken and can lead to errors
from one client ending up in another. In commit 901f31c70d8d ("Revert
"drm/i915: Propagate errors on awaiting already signaled fences""), we
attempted to get rid of fence error propagation but missed the case
added in commit f59fbc86c96e ("drm/i915/gt: Propagate change in error
status to children on unhold"). Revert that one too. This error was
found by an up-and-coming selftest which triggers a reset during
request cancellation and verifies that subsequent requests complete
successfully.
Matthew Brost [Thu, 9 Sep 2021 16:47:27 +0000 (09:47 -0700)]
drm/i915/guc: Workaround reset G2H is received after schedule done G2H
If the context is reset as a result of the request cancellation the
context reset G2H is received after schedule disable done G2H which is
the wrong order. The schedule disable done G2H release the waiting
request cancellation code which resubmits the context. This races
with the context reset G2H which also wants to resubmit the context but
in this case it really should be a NOP as request cancellation code owns
the resubmit. Use some clever tricks of checking the context state to
seal this race until the GuC firmware is fixed.
v2:
(Checkpatch)
- Fix typos
v3:
(Daniele)
- State that is a bug in the GuC firmware
Fixes: 94d4cdfc27c9 ("drm/i915/guc: Support request cancellation") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-7-matthew.brost@intel.com
Matthew Brost [Thu, 9 Sep 2021 16:47:26 +0000 (09:47 -0700)]
drm/i915/guc: Process all G2H message at once in work queue
Rather than processing 1 G2H at a time and re-queuing the work queue if
more messages exist, process all the G2H in a single pass of the work
queue.
Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-6-matthew.brost@intel.com
Matthew Brost [Thu, 9 Sep 2021 16:47:25 +0000 (09:47 -0700)]
drm/i915/guc: Don't drop ce->guc_active.lock when unwinding context
Don't drop ce->guc_active.lock when unwinding a context after reset.
At one point we had to drop this because of a lock inversion but that is
no longer the case. It is much safer to hold the lock so let's do that.
Fixes: 81ab2f1fdb42 ("drm/i915/guc: Reset implementation for new GuC interface") Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-5-matthew.brost@intel.com
Matthew Brost [Thu, 9 Sep 2021 16:47:24 +0000 (09:47 -0700)]
drm/i915/guc: Unwind context requests in reverse order
When unwinding requests on a reset context, if other requests in the
context are in the priority list the requests could be resubmitted out
of seqno order. Traverse the list of active requests in reverse and
append to the head of the priority list to fix this.
Fixes: 81ab2f1fdb42 ("drm/i915/guc: Reset implementation for new GuC interface") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-4-matthew.brost@intel.com
Matthew Brost [Thu, 9 Sep 2021 16:47:23 +0000 (09:47 -0700)]
drm/i915/guc: Fix outstanding G2H accounting
A small race that could result in incorrect accounting of the number
of outstanding G2H. Basically prior to this patch we did not increment
the number of outstanding G2H if we encoutered a GT reset while sending
a H2G. This was incorrect as the context state had already been updated
to anticipate a G2H response thus the counter should be incremented.
As part of this change we remove a legacy (now unused) path that was the
last caller requiring a G2H response that was not guaranteed to loop.
This allows us to simplify the accounting as we don't need to handle the
case where the send fails due to the channel being busy.
Also always use helper when decrementing this value.
v2 (Daniele): update GEM_BUG_ON check, pull in dead code removal from
later patch, remove loop param from context_deregister.
Fixes: 6f53e7ffdf42 ("drm/i915/guc: Ensure G2H response has space in buffer") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: <stable@vger.kernel.org> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-3-matthew.brost@intel.com
Matthew Brost [Thu, 9 Sep 2021 16:47:22 +0000 (09:47 -0700)]
drm/i915/guc: Fix blocked context accounting
Prior to this patch the blocked context counter was cleared on
init_sched_state (used during registering a context & resets) which is
incorrect. This state needs to be persistent or the counter can read the
incorrect value resulting in scheduling never getting enabled again.
Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Add missing fields and remove some duplicate fields when printing a
perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features
being automagically added to 'perf trace' syscall/tracepoint argument
id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian
consider its ABI unstable.
- Add support to print a textual representation of IBS raw sample data
in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script'
python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
tools headers UAPI: Sync linux/in.h copy with the kernel sources
perf tools: Add an option to build without libbfd
perf tools: Allow build-id with trailing zeros
perf tools: Fix hybrid config terms list corruption
perf tools: Factor out copy_config_terms() and free_config_terms()
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
perf tools: Ignore Documentation dependency file
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
tools include UAPI: Update linux/mount.h copy
perf beauty: Cover more flags in the move_mount syscall argument beautifier
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf report: Add support to print a textual representation of IBS raw sample data
perf report: Add tools/arch/x86/include/asm/amd-ibs.h
perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
...
* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
compiler_attributes.h: move __compiletime_{error|warning}
MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4
Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux
Pull auxdisplay updates from Miguel Ojeda:
"An assortment of improvements for auxdisplay:
- Replace symbolic permissions with octal permissions (Jinchao Wang)
- ks0108: Switch to use module_parport_driver() (Andy Shevchenko)
- charlcd: Drop unneeded initializers and switch to C99 style (Andy
Shevchenko)
- hd44780: Fix oops on module unloading (Lars Poeschel)
- Add I2C gpio expander example (Ralf Schlatterbeck)"
* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
auxdisplay: Replace symbolic permissions with octal permissions
auxdisplay: ks0108: Switch to use module_parport_driver()
auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
auxdisplay: hd44780: Fix oops on module unloading
auxdisplay: Add I2C gpio expander example
Merge tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"Updates for the SMP and CPU hotplug:
- Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
original hotplug code and now causing trouble with the ARM64 cache
topology setup due to the pointless SMP function call.
It's not longer required as the hotplug callbacks are guaranteed to
be invoked on the upcoming CPU.
- Remove the deprecated and now unused CPU hotplug functions
- Rewrite the CPU hotplug API documentation"
* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: core-api/cpuhotplug: Rewrite the API section
cpu/hotplug: Remove deprecated CPU-hotplug functions.
thermal: Replace deprecated CPU-hotplug functions.
drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fix from Greg KH:
"Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit
it as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
'obviously correct' when reviewing it locally :)"
* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: Use init_uts_ns.name instead of macros
Merge tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the idle timer expires in hardirq context, on PREEMPT_RT
- Make sure the run-queue balance callback is invoked only on the
outgoing CPU
* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Prevent balance_push() on remote runqueues
sched/idle: Make the idle timer expire in hard interrupt context
Merge tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Fix the futex PI requeue machinery to not return to userspace in
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock
check
- Other smaller cleanups and optimizations
* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix ww_mutex deadlock check
futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
futex: Avoid redundant task lookup
futex: Clarify comment for requeue_pi_wake_futex()
futex: Prevent inconsistent state and exit race
futex: Return error code instead of assigning it without effect
locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
Merge tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Handle negative second values properly when converting a timespec64
to nanoseconds.
* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Handle negative seconds correctly in timespec64_to_ns()
Merge branch 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull namei updates from Al Viro:
"Clearing fallout from mkdirat in io_uring series. The fix in the
kern_path_locked() patch plus associated cleanups"
* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
putname(): IS_ERR_OR_NULL() is wrong here
namei: Standardize callers of filename_create()
namei: Standardize callers of filename_lookup()
rename __filename_parentat() to filename_parentat()
namei: Fix use after free in kern_path_locked
Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smbfs updates from Steve French:
"cifs/smb3 updates:
- DFS reconnect fix
- begin creating common headers for server and client
- rename the cifs_common directory to smbfs_common to be more
consistent ie change use of the name cifs to smb (smb3 or smbfs is
more accurate, as the very old cifs dialect has long been
superseded by smb3 dialects).
In the future we can rename the fs/cifs directory to fs/smbfs.
This does not include the set of multichannel fixes nor the two
deferred close fixes (they are still being reviewed and tested)"
* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: properly invalidate cached root handle when closing it
cifs: move SMB FSCTL definitions to common code
cifs: rename cifs_common to smbfs_common
cifs: update FSCTL definitions
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
Merge branch 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"These changes update some existing semantic patches with
respect to some recent changes in the kernel.
Specifically, the change to kvmalloc.cocci searches for
kfree_sensitive rather than kzfree, and the change to
use_after_iter.cocci adds list_entry_is_head as a valid
use of a list iterator index variable after the end of
the loop"
* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccinelle: allow list_entry_is_head() to use pos
coccinelle: api: rename kzfree to kfree_sensitive
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Cc: Simon Ser <contact@emersion.fr> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick the changes in:
140390a6006a5e41 ("drm/i915/userptr: Probe existence of backing struct pages upon creation") 417b9d863129a967 ("drm/i915/guc: Implement GuC priority management") 1db4fe8dfd673642 ("drm/i915/uapi: reject set_domain for discrete") 2e4d96dd1ef7b1d7 ("drm/i915: Add TTM offset argument to mmap.") 28027a48adef1d13 ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc") c40ba9e631208a3f ("drm/i915/uapi: reject caching ioctls for discrete") 1c988c4717e3b75f ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc") 67fe9a938ff3a344 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc") de411643c8a1f036 ("drm/i915: Drop the CONTEXT_CLONE API (v2)") b0ef98395b3a7c44 ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP") a86773c64360180c ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE") 2bbd25fd64b0cbca ("drm/i915: Document the Virtual Engine uAPI") fa7a9cdddfeca826 ("drm/i915: Fix busy ioctl commentary")
That doesn't result in any changes to tooling as no new ioctl were
added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh).
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers UAPI: Sync linux/fs.h with the kernel sources
To pick the change in:
826ee0cf5f47c922 ("block: add ioctl to read the disk sequence number")
It adds a new ioctl, but we are still not using that to generate tables
for 'perf trace', so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
tools headers UAPI: Sync linux/in.h copy with the kernel sources
To pick the changes in:
a2386e0b98ec319c ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members") 325ee0c57a8b43cf ("net/ipv4: Replace one-element array with flexible-array member")
That don't result in any change in tooling, the structs changed remains
with the same layout.
This addresses this build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: David S. Miller <davem@davemloft.net> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: tony garnock-jones <tonyg@leastfixedpoint.com> Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 10 Sep 2021 22:46:30 +0000 (15:46 -0700)]
perf tools: Allow build-id with trailing zeros
Currently perf saves a build-id with size but old versions assumes the
size of 20. In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.
I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data. The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.
The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.
Displaying notes found in: .note.gnu.build-id
Owner Data size Description
GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
Build ID: 53e4c2f42a4c61a2d632d92a72afa08f
Let's fix this by allowing trailing zeros if the size is different.
Fixes: af35db0b5eeeee5b ("perf tools: Pass build_id object to dso__build_id_equal()") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 9 Sep 2021 12:55:08 +0000 (15:55 +0300)]
perf tools: Fix hybrid config terms list corruption
A config terms list was spliced twice, resulting in a never-ending loop
when the list was traversed. Fix by using list_splice_init() and copying
and freeing the lists as necessary.
This patch also depends on patch "perf tools: Factor out
copy_config_terms() and free_config_terms()"
Example on ADL:
Before:
# perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
# jobs
[1]+ Running perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname
# perf top -E 10
PerfTop: 4071 irqs/sec kernel: 6.9% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 24 CPUs)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Adrian Hunter [Thu, 9 Sep 2021 12:55:07 +0000 (15:55 +0300)]
perf tools: Factor out copy_config_terms() and free_config_terms()
Factor out copy_config_terms() and free_config_terms() so that they can
be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right
now as we have plenty of flags left, but could become one. (Hao)
- Fix lockdep issue introduced in this merge window (me)
- Fix a few issues with the worker creation (me, Pavel, Qiang)
- Fix regression with wq_has_sleeper() for IOPOLL (Pavel)
- Timeout link error propagation fix (Pavel)
* tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT
io_uring: fail links of cancelled timeouts
io-wq: fix memory leak in create_io_worker()
io-wq: fix silly logic error in io_task_work_match()
io_uring: drop ctx->uring_lock before acquiring sqd->lock
io_uring: fix missing mb() before waitqueue_active
io-wq: fix cancellation on create-worker failure
Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
- update a MAINTAINERS email address (Chaitanya Kulkarni)
- set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
- handle errors from add_disk() (Luis Chamberlain)
- update the keep alive interval when kato is modified (Tatsuya Sasaki)
- fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
- do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
- only call synchronize_srcu when clearing current path (Daniel Wagner)
- revalidate paths during rescan (Hannes Reinecke)
- Split out the fs/block_dev into block/fops.c and block/bdev.c, which
has been long overdue. Do this now before -rc1, to avoid annoying
conflicts due to this (Christoph)
* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
n64cart: fix return value check in n64cart_probe()
blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
block: move fs/block_dev.c to block/bdev.c
block: split out operations on block special files
blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
block: genhd: don't call blkdev_show() with major_names_lock held
nvme: update MAINTAINERS email address
nvme: add error handling support for add_disk()
nvme: only call synchronize_srcu when clearing current path
nvme: update keep alive interval when kato is modified
nvme-tcp: Do not reset transport on data digest errors
nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
nvmet: looks at the passthrough controller when initializing CAP
nvme: move nvme_multi_css into nvme.h
nvme-multipath: revalidate paths during rescan
nvme-multipath: set QUEUE_FLAG_NOWAIT
Merge tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block
Pull libata maintainer update from Jens Axboe:
"Damien agreed to take over maintainership of libata, and he would be a
great candidate for it. Update the MAINTAINERS entry to reflect the
change in maintainer and git tree"
* tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
libata: pass over maintainership to Damien Le Moal
Merge tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Minor fixes to the processing of the bootconfig tree"
* tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()
tracing/boot: Fix to check the histogram control param is a leaf node
tracing/boot: Fix trace_boot_hist_add_array() to check array is value
projects / kernel.git / log