Vladimir Oltean [Wed, 24 Jun 2020 13:54:45 +0000 (16:54 +0300)]
net: dsa: sja1105: unconditionally free old gating config
Currently sja1105_compose_gating_subschedule is not prepared to be
called for the case where we want to recompute the global tc-gate
configuration after we've deleted those actions on a port.
After deleting the tc-gate actions on the last port, max_cycle_time
would become zero, and that would incorrectly prevent
sja1105_free_gating_config from getting called.
So move the freeing function above the check for the need to apply a new
configuration.
Fixes: 83ed1d663245 ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 24 Jun 2020 13:54:44 +0000 (16:54 +0300)]
net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
It turns out that sja1105_compose_gating_subschedule must also be called
from sja1105_vl_delete, to recalculate the overall tc-gate
configuration. Currently this is not possible without introducing a
forward declaration. So move the function at the top of the file, along
with its dependencies.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 24 Jun 2020 10:08:18 +0000 (13:08 +0300)]
net: macb: free resources on failure path of at91ether_open()
DMA buffers were not freed on failure path of at91ether_open().
Along with changes for freeing the DMA buffers the enable/disable
interrupt instructions were moved to at91ether_start()/at91ether_stop()
functions and the operations on at91ether_stop() were done in
their reverse order (compared with how is done in at91ether_start()):
before this patch the operation order on interface open path
was as follows:
1/ alloc DMA buffers
2/ enable tx, rx
3/ enable interrupts
and the order on interface close path was as follows:
1/ disable tx, rx
2/ disable interrupts
3/ free dma buffers.
Fixes: 46e1536937ee ("net: macb: convert to phylink") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Wed, 24 Jun 2020 10:08:17 +0000 (13:08 +0300)]
net: macb: call pm_runtime_put_sync on failure path
Call pm_runtime_put_sync() on failure path of at91ether_open.
Fixes: e042252bef86 ("net: macb: ensure interface is not suspended on at91rm9200") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following patchset contains Netfilter fixes for net, they are:
1) Unaligned atomic access in ipset, from Russell King.
2) Missing module description, from Rob Gill.
3) Patches to fix a module unload causing NULL pointer dereference in
xtables, from David Wilder. For the record, I posting here his cover
letter explaining the problem:
A crash happened on ppc64le when running ltp network tests triggered by
"rmmod iptable_mangle".
See previous discussion in this thread:
https://lists.openwall.net/netdev/2020/06/03/161 .
In the crash I found in iptable_mangle_hook() that
state->net->ipv4.iptable_mangle=NULL causing a NULL pointer dereference.
net->ipv4.iptable_mangle is set to NULL in +iptable_mangle_net_exit() and
called when ip_mangle modules is unloaded. A rmmod task was found running
in the crash dump. A 2nd crash showed the same problem when running
"rmmod iptable_filter" (net->ipv4.iptable_filter=NULL).
To fix this I added .pre_exit hook in all iptable_foo.c. The pre_exit will
un-register the underlying hook and exit would do the table freeing. The
netns core does an unconditional +synchronize_rcu after the pre_exit hooks
insuring no packets are in flight that have picked up the pointer before
completing the un-register.
These patches include changes for both iptables and ip6tables.
We tested this fix with ltp running iptables01.sh and iptables01.sh -6 a
loop for 72 hours.
4) Add a selftest for conntrack helper assignment, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Martitz [Thu, 25 Jun 2020 12:26:03 +0000 (14:26 +0200)]
net: bridge: enfore alignment for ethernet address
The eth_addr member is passed to ether_addr functions that require
2-byte alignment, therefore the member must be properly aligned
to avoid unaligned accesses.
Fixes: 02e9e8577ada ("bridge: multicast to unicast") Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Thomas Martitz <t.martitz@avm.de> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
// Pure ACK received
+0.01 <[noecn] W. 14001:14001(0) ack 2001 win 65535
// Since CWR was sent, this packet should NOT have ECE set
+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0] P. 2001:3001(1000) ack 14001
// but Linux will still keep ECE latched here, with packetdrill
// flagging a missing ECE flag, expecting
// >[ect0] PE. 2001:3001(1000) ack 14001
// in the script
In the situation above we will continue to send ECN ECHO packets
and trigger the peer to reduce the congestion window. To avoid that
we can check CWR on pure ACKs received.
v3:
- Add a sequence check to avoid sending an ACK to an ACK
v2:
- Adjusted the comment
- move CWR check before checking for unacknowledged packets
Signed-off-by: Denis Kirjanov <denis.kirjanov@suse.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ard Biesheuvel [Thu, 25 Jun 2020 07:18:16 +0000 (09:18 +0200)]
net: phy: mscc: avoid skcipher API for single block AES encryption
The skcipher API dynamically instantiates the transformation object
on request that implements the requested algorithm optimally on the
given platform. This notion of optimality only matters for cases like
bulk network or disk encryption, where performance can be a bottleneck,
or in cases where the algorithm itself is not known at compile time.
In the mscc case, we are dealing with AES encryption of a single
block, and so neither concern applies, and we are better off using
the AES library interface, which is lightweight and safe for this
kind of use.
Note that the scatterlist API does not permit references to buffers
that are located on the stack, so the existing code is incorrect in
any case, but avoiding the skcipher and scatterlist APIs entirely is
the most straight-forward approach to fixing this.
Cc: Antoine Tenart <antoine.tenart@bootlin.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Fixes: 6e4e06e7e51af ("net: phy: mscc: macsec support") Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: bcmgenet: use hardware padding of runt frames
Now that scatter-gather and tx-checksumming are enabled by default
it revealed a packet corruption issue that can occur for very short
fragmented packets.
When padding these frames to the minimum length it is possible for
the non-linear (fragment) data to be added to the end of the linear
header in an SKB. Since the number of fragments is read before the
padding and used afterward without reloading, the fragment that
should have been consumed can be tacked on in place of part of the
padding.
The third commit in this set corrects this by removing the software
padding and allowing the hardware to add the pad bytes if necessary.
The first two commits resolve warnings observed by the kbuild test
robot and are included here for simplicity of application.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Thu, 25 Jun 2020 01:14:55 +0000 (18:14 -0700)]
net: bcmgenet: use hardware padding of runt frames
When commit f76855358b58 ("net: bcmgenet: correctly pad short
packets") added the call to skb_padto() it should have been
located before the nr_frags parameter was read since that value
could be changed when padding packets with lengths between 55
and 59 bytes (inclusive).
The use of a stale nr_frags value can cause corruption of the
pad data when tx-scatter-gather is enabled. This corruption of
the pad can cause invalid checksum computation when hardware
offload of tx-checksum is also enabled.
Since the original reason for the padding was corrected by
commit 5417bb84e7bc ("net: bcmgenet: fix skb_len in
bcmgenet_xmit_single()") we can remove the software padding all
together and make use of hardware padding of short frames as
long as the hardware also always appends the FCS value to the
frame.
Fixes: f76855358b58 ("net: bcmgenet: correctly pad short packets") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Thu, 25 Jun 2020 01:14:54 +0000 (18:14 -0700)]
net: bcmgenet: use __be16 for htons(ETH_P_IP)
The 16-bit value that holds a short in network byte order should
be declared as a restricted big endian type to allow type checks
to succeed during assignment.
Fixes: 532ef2ad343f ("net: bcmgenet: add support for ethtool rxnfc flows") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Thu, 25 Jun 2020 01:14:53 +0000 (18:14 -0700)]
net: bcmgenet: re-remove bcmgenet_hfb_add_filter
This function was originally removed by Baoyou Xie in
commit ee418186bf58 ("net: bcmgenet: remove unused function in
bcmgenet.c") to prevent a build warning.
Some of the functions removed by Baoyou Xie are now used for
WAKE_FILTER support so his commit was reverted, but this function
is still unused and the kbuild test robot dutifully reported the
warning.
This commit once again removes the remaining unused hfb functions.
Fixes: 7c4ac7277523 ("Revert "net: bcmgenet: remove unused function in bcmgenet.c"") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 22 Jun 2020 08:28:32 +0000 (10:28 +0200)]
selftests: netfilter: add test case for conntrack helper assignment
check that 'nft ... ct helper set <foo>' works:
1. configure ftp helper via nft and assign it to
connections on port 2121
2. check with 'conntrack -L' that the next connection
has the ftp helper attached to it.
Also add a test for auto-assign (old behaviour).
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David Wilder [Mon, 22 Jun 2020 17:10:13 +0000 (10:10 -0700)]
netfilter: ip6tables: Split ip6t_unregister_table() into pre_exit and exit helpers.
The pre_exit will un-register the underlying hook and .exit will do
the table freeing. The netns core does an unconditional synchronize_rcu
after the pre_exit hooks insuring no packets are in flight that have
picked up the pointer before completing the un-register.
Fixes: c3a7c9572eaa ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David Wilder [Mon, 22 Jun 2020 17:10:11 +0000 (10:10 -0700)]
netfilter: iptables: Split ipt_unregister_table() into pre_exit and exit helpers.
The pre_exit will un-register the underlying hook and .exit will do the
table freeing. The netns core does an unconditional synchronize_rcu after
the pre_exit hooks insuring no packets are in flight that have picked up
the pointer before completing the un-register.
Fixes: c3a7c9572eaa ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Russell King [Wed, 10 Jun 2020 20:51:11 +0000 (21:51 +0100)]
netfilter: ipset: fix unaligned atomic access
When using ip_set with counters and comment, traffic causes the kernel
to panic on 32-bit ARM:
Alignment trap: not handling instruction e1b82f9f at [<bf01b0dc>]
Unhandled fault: alignment exception (0x221) at 0xea08133c
PC is at ip_set_match_extensions+0xe0/0x224 [ip_set]
The problem occurs when we try to update the 64-bit counters - the
faulting address above is not 64-bit aligned. The problem occurs
due to the way elements are allocated, for example:
If the element has a requirement for a member to be 64-bit aligned,
and set->dsize is not a multiple of 8, but is a multiple of four,
then every odd numbered elements will be misaligned - and hitting
an atomic64_add() on that element will cause the kernel to panic.
ip_set_elem_len() must return a size that is rounded to the maximum
alignment of any extension field stored in the element. This change
ensures that is the case.
Fixes: 0929b5ffa7d9 ("netfilter: ipset: Fix extension alignment") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Colin Ian King [Wed, 24 Jun 2020 10:13:02 +0000 (11:13 +0100)]
qed: add missing error test for DBG_STATUS_NO_MATCHING_FRAMING_MODE
The error DBG_STATUS_NO_MATCHING_FRAMING_MODE was added to the enum
enum dbg_status however there is a missing corresponding entry for
this in the array s_status_str. This causes an out-of-bounds read when
indexing into the last entry of s_status_str. Fix this by adding in
the missing entry.
Addresses-Coverity: ("Out-of-bounds read"). Fixes: ff1ebbebfb7f ("qed: FW 8.42.2.0 debug features") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: phy: call phy_disable_interrupts() in phy_init_hw()
We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.
As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."
patch1 makes phy_disable_interrupts() non-static so that it could be used
in phy_init_hw() to have a defined init state.
patch2 calls phy_disable_interrupts() in phy_init_hw() to have a
defined init state.
Since v3:
- call phy_disable_interrupts() have interrupts disabled first then
config_init, thank Florian
Since v2:
- Don't export phy_disable_interrupts() but just make it non-static
Since v1:
- EXPORT the correct symbol
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jisheng Zhang [Wed, 24 Jun 2020 07:59:23 +0000 (15:59 +0800)]
net: phy: call phy_disable_interrupts() in phy_init_hw()
Call phy_disable_interrupts() in phy_init_hw() to "have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state." as pointed
out by Heiner.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jisheng Zhang [Wed, 24 Jun 2020 07:58:24 +0000 (15:58 +0800)]
net: phy: make phy_disable_interrupts() non-static
We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.
As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."
Make phy_disable_interrupts() non-static so that it could be used in
phy_init_hw() to have a defined init state.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sascha Hauer [Wed, 24 Jun 2020 07:00:45 +0000 (09:00 +0200)]
net: ethernet: mvneta: Add back interface mode validation
When writing the serdes configuration register was moved to
mvneta_config_interface() the whole code block was removed from
mvneta_port_power_up() in the assumption that its only purpose was to
write the serdes configuration register. As mentioned by Russell King
its purpose was also to check for valid interface modes early so that
later in the driver we do not have to care for unexpected interface
modes.
Add back the test to let the driver bail out early on unhandled
interface modes.
Fixes: eab544d2c666 ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Sascha Hauer [Wed, 24 Jun 2020 07:00:44 +0000 (09:00 +0200)]
net: ethernet: mvneta: Do not error out in non serdes modes
In mvneta_config_interface() the RGMII modes are catched by the default
case which is an error return. The RGMII modes are valid modes for the
driver, so instead of returning an error add a break statement to return
successfully.
This avoids this warning for non comphy SoCs which use RGMII, like
SolidRun Clearfog:
WARNING: CPU: 0 PID: 268 at drivers/net/ethernet/marvell/mvneta.c:3512 mvneta_start_dev+0x220/0x23c
Fixes: eab544d2c666 ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Mack [Sat, 20 Jun 2020 19:39:25 +0000 (21:39 +0200)]
dsa: Allow forwarding of redirected IGMP traffic
The driver for Marvell switches puts all ports in IGMP snooping mode
which results in all IGMP/MLD frames that ingress on the ports to be
forwarded to the CPU only.
The bridge code in the kernel can then interpret these frames and act
upon them, for instance by updating the mdb in the switch to reflect
multicast memberships of stations connected to the ports. However,
the IGMP/MLD frames must then also be forwarded to other ports of the
bridge so external IGMP queriers can track membership reports, and
external multicast clients can receive query reports from foreign IGMP
queriers.
Currently, this is impossible as the EDSA tagger sets offload_fwd_mark
on the skb when it unwraps the tagged frames, and that will make the
switchdev layer prevent the skb from egressing on any other port of
the same switch.
To fix that, look at the To_CPU code in the DSA header and make
forwarding of the frame possible for trapped IGMP packets.
Introduce some #defines for the frame types to make the code a bit more
comprehensive.
Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Tue, 23 Jun 2020 16:33:15 +0000 (18:33 +0200)]
openvswitch: take into account de-fragmentation/gso_size in execute_check_pkt_len
ovs connection tracking module performs de-fragmentation on incoming
fragmented traffic. Take info account if traffic has been de-fragmented
in execute_check_pkt_len action otherwise we will perform the wrong
nested action considering the original packet size. This issue typically
occurs if ovs-vswitchd adds a rule in the pipeline that requires connection
tracking (e.g. OVN stateful ACLs) before execute_check_pkt_len action.
Moreover take into account GSO fragment size for GSO packet in
execute_check_pkt_len routine
Fixes: d4860cdb1799c ("net: openvswitch: Add a new action check_pkt_len") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 24 Jun 2020 03:53:28 +0000 (20:53 -0700)]
Merge branch 'Two-phylink-pause-fixes'
Russell King says:
====================
Two phylink pause fixes
While testing, I discovered two issues with ethtool -A with phylink.
First, if there is a PHY bound to the network device, we hit a
deadlock when phylib tries to notify us of the link changing as a
result of triggering a renegotiation.
Second, when we are manually forcing the pause settings, and there
is no renegotiation triggered, we do not update the MAC via the new
mac_link_up approach.
These two patches solve both problems, and will need to be backported
to v5.7; they do not apply cleanly there due to the introduction of
PCS in the v5.8 merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We have been relying on link events and mac_config() when the manual
pause modes are changed. With recent developments, such as moving
the programming of link state to mac_link_up(), this no longer works.
To ensure that we update the MAC, we must generate a link-down followed
by a link-up event; we can do that by setting mac_link_dropped and
triggering a resolve.
Fixes: 029f9aa0e6a4 ("net: phylink: propagate resolved link config via mac_link_up()") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 23 Jun 2020 16:47:23 +0000 (17:47 +0100)]
net: phylink: fix ethtool -A with attached PHYs
Fix a phylink's ethtool set_pauseparam support deadlock caused by phylib
interacting with phylink: we must not hold the state lock while calling
phylib functions that may call into phylink_phy_change().
Fixes: c1703532515b ("net: phylink: allow ethtool -A to change flow control advertisement") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Mon, 22 Jun 2020 20:26:04 +0000 (23:26 +0300)]
net: Do not clear the sock TX queue in sk_set_socket()
Clearing the sock TX queue in sk_set_socket() might cause unexpected
out-of-order transmit when called from sock_orphan(), as outstanding
packets can pick a different TX queue and bypass the ones already queued.
This is undesired in general. More specifically, it breaks the in-order
scheduling property guarantee for device-offloaded TLS sockets.
Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it
explicitly only where needed.
Fixes: 20e5169d94b8 ("net: Introduce sk_tx_queue_mapping") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 24 Jun 2020 01:25:45 +0000 (03:25 +0200)]
net: ethtool: Handle missing cable test TDR parameters
A last minute change put the TDR cable test parameters into a nest.
The validation is not sufficient, resulting in an oops if the nest is
missing. Set default values first, then update them if the nest is
provided.
Fixes: 0035e7075063 ("net: ethtool: Allow PHY cable test TDR data to configured") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 24 Jun 2020 03:13:58 +0000 (20:13 -0700)]
Merge branch 'bnxt_en-Bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes.
The first patch stores the firmware version code which is needed by the
next 2 patches to determine some worarounds based on the firmware version.
The workarounds are to disable legacy TX push mode and to clear the
hardware statistics during ifdown. The last patch checks that it is
a PF before reading the VPD.
Please also queue these for -stable. Thanks.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Tue, 23 Jun 2020 23:01:38 +0000 (19:01 -0400)]
bnxt_en: Read VPD info only for PFs
Virtual functions does not have VPD information. This patch modifies
calling bnxt_read_vpd_info() only for PFs and avoids an unnecessary
error log.
Fixes: 02bca9679006 ("bnxt_en: Read partno and serialno of the board from VPD") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 23 Jun 2020 23:01:37 +0000 (19:01 -0400)]
bnxt_en: Fix statistics counters issue during ifdown with older firmware.
On older firmware, the hardware statistics are not cleared when the
driver frees the hardware stats contexts during ifdown. The driver
expects these stats to be cleared and saves a copy before freeing
the stats contexts. During the next ifup, the driver will likely
allocate the same hardware stats contexts and this will cause a big
increase in the counters as the old counters are added back to the
saved counters.
We fix it by making an additional firmware call to clear the counters
before freeing the hw stats contexts when the firmware is the older
20.x firmware.
Fixes: a17a49596f68 ("bnxt_en: Save ring statistics before reset.") Reported-by: Jakub Kicinski <kicinski@fb.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Jakub Kicinski <kicinski@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 23 Jun 2020 23:01:36 +0000 (19:01 -0400)]
bnxt_en: Do not enable legacy TX push on older firmware.
Older firmware may not support legacy TX push properly and may not
be disabling it. So we check certain firmware versions that may
have this problem and disable legacy TX push unconditionally.
Fixes: dfe047769e71 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 23 Jun 2020 23:01:35 +0000 (19:01 -0400)]
bnxt_en: Store the running firmware version code.
We currently only store the firmware version as a string for ethtool
and devlink info. Store it also as a version code. The next 2
patches will need to check the firmware major version to determine
some workarounds.
We also use the 16-bit firmware version fields if the firmware is newer
and provides the 16-bit fields.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:42 +0000 (01:51 +0530)]
cxgb4vf: update kernel-doc line comments
Update several kernel-doc line comments to fix warnings reported by
make W=1.
Fixes following class of warnings reported by make W=1 in several
places:
cxgb4vf_main.c:275: warning: Function parameter or member 'persistent'
not described in 'cxgb4vf_change_mac'
cxgb4vf_main.c:275: warning: Excess function parameter 'persist'
description in 'cxgb4vf_change_mac'
Fixes: 57e4d2b4e81b ("cxgb4vf: Add core T4 PCI-E SR-IOV Virtual Function hardware definitions and device communication code") Fixes: 0ebad0bb8f7d ("cxgb4vf: Add T4 Virtual Function Scatter-Gather Engine DMA code") Fixes: f498f392a3fd ("cxgb4vf: Add and initialize some sge params for VF driver") Fixes: 9d5e6885976f ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: d4dc42fa3e85 ("drivers/net: chelsio/cxgb*: Convert timers to use timer_setup()") Fixes: 77df08e02130 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:41 +0000 (01:51 +0530)]
cxgb4: update kernel-doc line comments
Update several kernel-doc line comments to fix warnings reported by
make W=1.
Fixes following class of warnings reported by make W=1 in several
places:
l2t.c:616: warning: Cannot understand * @dev: net_device pointer
t4_hw.c:3175: warning: Function parameter or member 'adap' not
described in 't4_get_exprom_version'
t4_hw.c:3175: warning: Excess function parameter 'adapter' description
in 't4_get_exprom_version'
Fixes: f93bc83ad5d8 ("cxgb4: Add HW and FW support code") Fixes: 5a9e07790725 ("cxgb4: Add packet queues and packet DMA code") Fixes: 75b223d8bfcb ("cxgb4: Don't attempt to upgrade T4 firmware when cxgb4 will end up as a slave") Fixes: ba4c3911803c ("RDMA/cxgb4: Fix bug for active and passive LE hash collision path") Fixes: 8aca6eaf4411 ("cxgb4: Add support in cxgb4 to get expansion rom version via ethtool") Fixes: 6e1665d658ac ("cxgb4: Add API to alloc l2t entry; also update existing ones") Fixes: d661dc20c63d ("cxgb4: Decode link down reason code obtained from firmware") Fixes: 20e85d5d685c ("cxgb4: Update T6 Buffer Group and Channel Mappings") Fixes: 41bbae8fbcba ("cxgb4: Use Firmware params to get buffer-group map") Fixes: 098c34d3809a ("cxgb4: time stamping interface for PTP") Fixes: daba72129334 ("cxgb4: Add PTP Hardware Clock (PHC) support") Fixes: 9d5e6885976f ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 42aa3ba838c2 ("cxgb4: update API for TP indirect register access") Fixes: b960f133e722 ("cxgb4: introduce SMT ops to prepare for SMAC rewrite support") Fixes: 6ab1bd33f573 ("cxgb4: collect egress and ingress SGE queue contexts") Fixes: 01db736b71a8 ("cxgb4: Add support for ethtool i2c dump") Fixes: d7c3ac2b7493 ("cxgb4/cxgb4vf: add support for ndo_set_vf_vlan") Fixes: c6f74ff98840 ("cxgb4: add tc flower match support for tunnel VNI") Fixes: 8429bf3c95b1 ("cxgb4: use new fw interface to get the VIN and smt index") Fixes: 77df08e02130 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Fixes: bd0ef9097b8b ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Fixes: 4dc1c193d57b ("cxgb4: add FLOWC based QoS offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:40 +0000 (01:51 +0530)]
cxgb4: fix set but unused variable when DCB is disabled
Remove the set but unused variable when DCB is disabled. Instead,
do the calculation directly inline.
Fixes following warning in make W=1:
cxgb4_main.c: In function 'cfg_queues':
cxgb4_main.c:5380:29: warning: variable 'n1g' set but not used
[-Wunused-but-set-variable]
u32 i, n10g = 0, qidx = 0, n1g = 0;
^
Fixes: 7fdb5e12530a ("cxgb4: fix checks for max queues to allocate") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:39 +0000 (01:51 +0530)]
cxgb4: move DCB version extern to header file
Move the DCB version string array extern to header file.
Fixes following sparse warning:
cxgb4_dcb.c:13:12: warning: symbol 'dcb_ver_array' was not declared.
Should it be static?
Fixes: 43fcc3d57b40 ("cxgb4: add support to display DCB info") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:38 +0000 (01:51 +0530)]
cxgb4: remove cast when saving IPv4 partial checksum
The checksum field in IPv4 header is in __sum16 and ip_fast_csum()
also returns __sum16. So, no need to cast it to u16.
Fixes following sparse warning:
sge.c:1539:47: warning: cast from restricted __sum16
sge.c:1539:44: warning: incorrect type in assignment (different base types)
sge.c:1539:44: expected restricted __sum16 [usertype] check
sge.c:1539:44: got unsigned short [usertype]
Fixes: 591b633c7f3d ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The data in destination buffer is expected to be be parsed in big
endian. So, use the right context.
Fixes following sparse warning:
cudbg_lib.c:2041:44: warning: incorrect type in assignment (different
base types)
cudbg_lib.c:2041:44: expected unsigned long long [usertype]
cudbg_lib.c:2041:44: got restricted __be64 [usertype]
Fixes: 6ab1bd33f573 ("cxgb4: collect egress and ingress SGE queue contexts") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:36 +0000 (01:51 +0530)]
cxgb4: use correct type for all-mask IP address comparison
Use correct type to check for all-mask exact match IP addresses.
Fixes following sparse warnings due to big endian value checks
against 0xffffffff in is_addr_all_mask():
cxgb4_filter.c:977:25: warning: restricted __be32 degrades to integer
cxgb4_filter.c:983:37: warning: restricted __be32 degrades to integer
cxgb4_filter.c:984:37: warning: restricted __be32 degrades to integer
cxgb4_filter.c:985:37: warning: restricted __be32 degrades to integer
cxgb4_filter.c:986:37: warning: restricted __be32 degrades to integer
Fixes: a657cda81c35 ("cxgb4: add support to create hash-filters via tc-flower offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:35 +0000 (01:51 +0530)]
cxgb4: fix endian conversions for L4 ports in filters
The source and destination L4 ports in filter offload need to be
in CPU endian. They will finally be converted to Big Endian after
all operations are done and before giving them to hardware. The
L4 ports for NAT are expected to be passed as a byte stream TCB.
So, treat them as such.
Fixes following sparse warnings in several places:
cxgb4_tc_flower.c:159:33: warning: cast from restricted __be16
cxgb4_tc_flower.c:159:33: warning: incorrect type in argument 1 (different
base types)
cxgb4_tc_flower.c:159:33: expected unsigned short [usertype] val
cxgb4_tc_flower.c:159:33: got restricted __be16 [usertype] dst
Fixes: a860b3c1c48b ("cxgb4: Add LE hash collision bug fix path in LLD driver") Fixes: a70dd6adf173 ("cxgb4: add basic tc flower offload support") Fixes: 8c8bfb1c758a ("cxgb4: add tc flower support for L3/L4 rewrite") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:34 +0000 (01:51 +0530)]
cxgb4: parse TC-U32 key values and masks natively
TC-U32 passes all keys values and masks in __be32 format. The parser
already expects this and hence pass the value and masks in __be32
natively to the parser.
Fixes following sparse warnings in several places:
cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base
types)
cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val
cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val
cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32
Fixes: 63ad8e7c04ec ("cxgb4: add parser to translate u32 filters to internal spec") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:33 +0000 (01:51 +0530)]
cxgb4: use unaligned conversion for fetching timestamp
Use get_unaligned_be64() to fetch the timestamp needed for ns_to_ktime()
conversion.
Fixes following sparse warning:
sge.c:3282:43: warning: cast to restricted __be64
Fixes: 098c34d3809a ("cxgb4: time stamping interface for PTP") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:32 +0000 (01:51 +0530)]
cxgb4: move PTP lock and unlock to caller in Tx path
Check for whether PTP is enabled or not at the caller and perform
locking/unlocking at the caller.
Fixes following sparse warning:
sge.c:1641:26: warning: context imbalance in 'cxgb4_eth_xmit' -
different lock contexts for basic block
Fixes: 098c34d3809a ("cxgb4: time stamping interface for PTP") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Tue, 23 Jun 2020 20:21:31 +0000 (01:51 +0530)]
cxgb4: move handling L2T ARP failures to caller
Move code handling L2T ARP failures to the only caller.
Fixes following sparse warning:
skbuff.h:2091:29: warning: context imbalance in
'handle_failed_resolution' - unexpected unlock
Fixes: c360c4a967e4 ("cxgb4: Replace arpq_head/arpq_tail with SKB double link-list code") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets
printed, but is initialized only under 'ref_cnt == 1' condition. This
results in:
In file included from ./include/linux/kernel.h:15:0,
from ./include/asm-generic/bug.h:19,
from ./arch/x86/include/asm/bug.h:86,
from ./include/linux/bug.h:5,
from ./include/linux/io.h:11,
from drivers/net/ethernet/qlogic/qed/qed_dev.c:35:
drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter':
./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized
in this function [-Wmaybe-uninitialized]
printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~
drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared
here
u8 filter_idx, abs_ppfid;
^~~~~~~~~
...under W=1+.
Fix this by initializing it with zero.
Fixes: 29ac7565c052 ("qed: Add llh ppfid interface and 100g support for offload protocols") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qed: reset ILT block sizes before recomputing to fix crashes
Sizes of all ILT blocks must be reset before ILT recomputing when
disabling clients, or memory allocation may exceed ILT shadow array
and provoke system crashes.
Fixes: e9f82ce07354 ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qede: fix use-after-free on recovery and AER handling
Set edev->cdev pointer to NULL after calling remove() callback to avoid
using of already freed object.
Fixes: a7a7554a0d6b ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently PTP cyclecounter and timecounter are initialized only on
the first probing and are cleaned up during removal. This means that
PTP becomes non-functional after device recovery.
Fix this by unconditional PTP initialization on probing and clearing
Tx pending bit on exiting.
Fixes: a7a7554a0d6b ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This is likely a copy'n'paste mistake. The amount of ILT lines to
reserve for a single VF was being multiplied by the total VFs count.
This led to a huge redundancy in reservation and potential lines
drainouts.
Fixes: e9f82ce07354 ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
25ms sleep cycles in waiting for PF response are excessive and may lead
to different timeout failures.
Start to wait with short udelays, and in most cases polling will end
here. If the time was not sufficient, switch to msleeps.
usleep_range() may go far beyond 100us depending on platform and tick
configuration, hence atomic udelays for consistency.
Also add explicit DMA barriers since 'done' always comes from a shared
request-response DMA pool, and note that in the comment nearby.
Fixes: e9f82ce07354 ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qede: stop adding events on an already destroyed workqueue
Set rdma_wq pointer to NULL after destroying the workqueue and check
for it when adding new events to fix crashes on driver unload.
Fixes: 4aff7732a685 ("qede: Add qedr framework") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qed_spq_unregister_async_cb() should be called before
qed_rdma_info_free() to avoid crash-spawning uses-after-free.
Instead of calling it from each subsystem exit code, do it in one place
on PF down.
Fixes: cc02e5a18e4c ("qed: Fix rdma_info structure allocation") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qed_chain_get_element_left{,_u32} returned 0 when the difference
between producer and consumer page count was equal to the total
page count.
Fix this by conditional expanding of producer value (vs
unconditional). This allowed to eliminate normalizaton against
total page count, which was the cause of this bug.
Misc: replace open-coded constants with common defines.
Fixes: 7d9bd3fa3169 ("qed: Revisit chain implementation") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethtool: add missing string for NETIF_F_GSO_TUNNEL_REMCSUM
Commit 4e30365a498c ("udp: Changes to udp_offload to support remote
checksum offload") added new GSO type and a corresponding netdev
feature, but missed Ethtool's 'netdev_features_strings' table.
Give it a name so it will be exposed to userspace and become available
for manual configuration.
v3:
- decouple from "netdev_features_strings[] cleanup" series;
- no functional changes.
v2:
- don't split the "Fixes:" tag across lines;
- no functional changes.
Fixes: 4e30365a498c ("udp: Changes to udp_offload to support remote checksum offload") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
Before, we took a reference to the creating netns if the new netns was
different. This caused issues with circular references, with two
wireguard interfaces swapping namespaces. The solution is to rather not
take any extra references at all, but instead simply invalidate the
creating netns pointer when that netns is deleted.
In order to prevent this from happening again, this commit improves the
rough object leak tracking by allowing it to account for created and
destroyed interfaces, aside from just peers and keys. That then makes it
possible to check for the object leak when having two interfaces take a
reference to each others' namespaces.
Fixes: 4dff5496e367 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wireguard: noise: do not assign initiation time in if condition
Fixes an error condition reported by checkpatch.pl which caused by
assigning a variable in an if condition in wg_noise_handshake_consume_
initiation().
Signed-off-by: Frank Werner-Krippendorf <mail@hb9fxq.ch> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch series does the following:
- fixes the enum br_mrp_port_role_type. It removes the port role none(0x2)
because this is in conflict with the standard. The standard defines the
interconnect port role as value 0x2.
- adds checks regarding current defined port roles: primary(0x0) and
secondary(0x1).
v2:
- add the validation code when setting the port role.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Tue, 23 Jun 2020 09:05:41 +0000 (11:05 +0200)]
bridge: mrp: Validate when setting the port role
This patch adds specific checks for primary(0x0) and secondary(0x1) when
setting the port role. For any other value the function
'br_mrp_set_port_role' will return -EINVAL.
Fixes: 2ab7ba44ea4aa4 ("bridge: mrp: Rework the MRP netlink interface") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Tue, 23 Jun 2020 09:05:40 +0000 (11:05 +0200)]
bridge: uapi: mrp: Fix MRP_PORT_ROLE
Currently the MRP_PORT_ROLE_NONE has the value 0x2 but this is in conflict
with the IEC 62439-2 standard. The standard defines the following port
roles: primary (0x0), secondary(0x1), interconnect(0x2).
Therefore remove the port role none.
Fixes: 9d0adf2ee96586 ("bridge: uapi: mrp: Add mrp attributes.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Mon, 22 Jun 2020 11:45:58 +0000 (19:45 +0800)]
mptcp: drop sndr_key in mptcp_syn_options
In RFC 8684, we don't need to send sndr_key in SYN package anymore, so drop
it.
Fixes: d69979df7941 ("mptcp: parse and emit MP_CAPABLE option according to v1 spec") Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Gaurav Singh [Sun, 21 Jun 2020 15:30:17 +0000 (11:30 -0400)]
ethtool: Fix check in ethtool_rx_flow_rule_create
Fix check in ethtool_rx_flow_rule_create
Fixes: 6693af4601e7 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Signed-off-by: Gaurav Singh <gaurav1086@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Sun, 21 Jun 2020 13:46:25 +0000 (13:46 +0000)]
hsr: avoid to create proc file after unregister
When an interface is being deleted, "/proc/net/dev_snmp6/<interface name>"
is deleted.
The function for this is addrconf_ifdown() in the addrconf_notify() and
it is called by notification, which is NETDEV_UNREGISTER.
But, if NETDEV_CHANGEMTU is triggered after NETDEV_UNREGISTER,
this proc file will be created again.
This recreated proc file will be deleted by netdev_wati_allrefs().
Before netdev_wait_allrefs() is called, creating a new HSR interface
routine can be executed and It tries to create a proc file but it will
find an un-deleted proc file.
At this point, it warns about it.
To avoid this situation, it can use ->dellink() instead of
->ndo_uninit() to release resources because ->dellink() is called
before NETDEV_UNREGISTER.
So, a proc file will not be recreated.
Test commands
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link set dummy0 mtu 1300
#SHELL1
while :
do
ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1
done
Reported-by: syzbot+1d51c8b74efa4c44adeb@syzkaller.appspotmail.com Fixes: 84ba9354fb6e ("hsr: use upper/lower device infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It looks like that smsc95xx_unbind() is freeing the structures that are
still in use by the concurrently running workqueue callback. Thus switch
to using cancel_delayed_work_sync() to ensure the work callback really
is no longer active.
Reported-by: syzbot+29dc7d4ae19b703ff947@syzkaller.appspotmail.com Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin noted that this will behave differently on big endian
architectures compared to little endian architectures.
Fix this by following Colin's suggestion and have the function accept
and return 'u32' instead of passing the current size by reference.
Fixes: f4e26af0882b ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Fixes: 3ab5a93883eb ("mlxsw: spectrum: Adjust headroom buffers for 8x ports") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Colin Ian King <colin.king@canonical.com> Suggested-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dejin Zheng [Sat, 20 Jun 2020 14:55:34 +0000 (22:55 +0800)]
net: phy: smsc: fix printing too many logs
Commit d8edf86a6c1402 ("net: phy: smsc: use phy_read_poll_timeout()
to simplify the code") will print a lot of logs as follows when Ethernet
cable is not connected:
When wait 640 ms for check ENERGYON bit, the timeout should not be
regarded as an actual error and an error message also should not be
printed. due to a hardware bug in LAN87XX device, it leads to unstable
detection of plugging in Ethernet cable when LAN87xx is in Energy Detect
Power-Down mode. the workaround for it involves, when the link is down,
and at each read_status() call:
- disable EDPD mode, forcing the PHY out of low-power mode
- waiting 640ms to see if we have any energy detected from the media
- re-enable entry to EDPD mode
This is presumably enough to allow the PHY to notice that a cable is
connected, and resume normal operations to negotiate with the partner.
The problem is that when no media is detected, the 640ms wait times
out and this commit was modified to prints an error message. it is an
inappropriate conversion by used phy_read_poll_timeout() to introduce
this bug. so fix this issue by use read_poll_timeout() to replace
phy_read_poll_timeout().
Fixes: d8edf86a6c1402 ("net: phy: smsc: use phy_read_poll_timeout() to simplify the code") Reported-by: Kevin Groeneveld <kgroeneveld@gmail.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Fri, 19 Jun 2020 22:38:16 +0000 (23:38 +0100)]
rxrpc: Fix notification call on completion of discarded calls
When preallocated service calls are being discarded, they're passed to
->discard_new_call() to have the caller clean up any attached higher-layer
preallocated pieces before being marked completed. However, the act of
marking them completed now invokes the call's notification function - which
causes a problem because that function might assume that the previously
freed pieces of memory are still there.
Fix this by setting a dummy notification function on the socket after
calling ->discard_new_call().
This results in the following kasan message when the kafs module is
removed.
==================================================================
BUG: KASAN: use-after-free in afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707
Write of size 1 at addr ffff8880946c39e4 by task kworker/u4:1/21
Reported-by: syzbot+d3eccef36ddbd02713e9@syzkaller.appspotmail.com Fixes: c5e0e9cded27 ("rxrpc: Fix missing notification") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 19 Jun 2020 03:24:45 +0000 (11:24 +0800)]
tc-testing: update geneve options match in tunnel_key unit tests
Since iproute2 commit f72c3ad00f3b ("tc: m_tunnel_key: add options
support for vxlan"), the geneve opt output use key word "geneve_opts"
instead of "geneve_opt". To make compatibility for both old and new
iproute2, let's accept both "geneve_opt" and "geneve_opts".
Suggested-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 18 Jun 2020 21:25:50 +0000 (23:25 +0200)]
r8169: fix firmware not resetting tp->ocp_base
Typically the firmware takes care that tp->ocp_base is reset to its
default value. That's not the case (at least) for RTL8117.
As a result subsequent PHY access reads/writes the wrong page and
the link is broken. Fix this be resetting tp->ocp_base explicitly.
Fixes: 21896a878bf0 ("r8169: load firmware for RTL8168fp/RTL8117") Reported-by: Aaron Ma <mapengyu@gmail.com> Tested-by: Aaron Ma <mapengyu@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dany Madden [Thu, 18 Jun 2020 19:24:13 +0000 (15:24 -0400)]
ibmvnic: continue to init in CRQ reset returns H_CLOSED
Continue the reset path when partner adapter is not ready or H_CLOSED is
returned from reset crq. This patch allows the CRQ init to proceed to
establish a valid CRQ for traffic to flow after reset.
Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 18 Jun 2020 17:29:04 +0000 (10:29 -0700)]
ionic: tame the watchdog timer on reconfig
Even with moving netif_tx_disable() to an earlier point when
taking down the queues for a reconfiguration, we still end
up with the occasional netdev watchdog Tx Timeout complaint.
The old method of using netif_trans_update() works fine for
queue 0, but has no effect on the remaining queues. Using
netif_device_detach() allows us to signal to the watchdog to
ignore us for the moment.
Fixes: 1c7e71712563 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 18 Jun 2020 16:40:43 +0000 (12:40 -0400)]
selftests/net: report etf errors correctly
The ETF qdisc can queue skbs that it could not pace on the errqueue.
Address a few issues in the selftest
- recv buffer size was too small, and incorrectly calculated
- compared errno to ee_code instead of ee_errno
- missed invalid request error type
v2:
- fix a few checkpatch --strict indentation warnings
Fixes: 8cf4211fff59 ("selftests/net: make so_txtime more robust to timer variance") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Thu, 18 Jun 2020 15:43:46 +0000 (10:43 -0500)]
ibmveth: Fix max MTU limit
The max MTU limit defined for ibmveth is not accounting for
virtual ethernet buffer overhead, which is twenty-two additional
bytes set aside for the ethernet header and eight additional bytes
of an opaque handle reserved for use by the hypervisor. Update the
max MTU to reflect this overhead.
Fixes: 8f5b18ec5447 ("ethernet: use net core MTU range checking in more drivers") Fixes: f225541a0205 ("ethernet: fix min/max MTU typos") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
several fixes for indirect flow_blocks offload
v2:
patch2: store the cb_priv of representor to the flow_block_cb->indr.cb_priv
in the driver. And make the correct check with the statments
this->indr.cb_priv == cb_priv
patch4: del the driver list only in the indriect cleanup callbacks
v3:
add the cover letter and changlogs.
v4:
collapsed 1/4, 2/4, 4/4 in v3 to one fix
Add the prepare patch 1 and 2
v5:
patch1: place flow_indr_block_cb_alloc() right before
flow_indr_dev_setup_offload() to avoid moving flow_block_indr_init()
This series fixes commit 00e3889938ef ("net: flow_offload: consolidate
indirect flow_block infrastructure") that revists the flow_block
infrastructure.
patch #1 #2: prepare for fix patch #3
add and use flow_indr_block_cb_alloc/remove function
patch #3: fix flow_indr_dev_unregister path
If the representor is removed, then identify the indirect flow_blocks
that need to be removed by the release callback and the port representor
structure. To identify the port representor structure, a new
indr.cb_priv field needs to be introduced. The flow_block also needs to
be removed from the driver list from the cleanup path
patch#4 fix block->nooffloaddevcnt warning dmesg log.
When a indr device add in offload success. The block->nooffloaddevcnt
should be 0. After the representor go away. When the dir device go away
the flow_block UNBIND operation with -EOPNOTSUPP which lead the warning
demesg log.
The block->nooffloaddevcnt should always count for indr block.
even the indr block offload successful. The representor maybe
gone away and the ingress qdisc can work in software mode.
====================
Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The block->nooffloaddevcnt should always count for indr block.
even the indr block offload successful. The representor maybe
gone away and the ingress qdisc can work in software mode.
block->nooffloaddevcnt warning with following dmesg log:
Fixes: 3060b9a6d85f ("net: use flow_indr_dev_setup_offload()") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
If the representor is removed, then identify the indirect flow_blocks
that need to be removed by the release callback and the port representor
structure. To identify the port representor structure, a new
indr.cb_priv field needs to be introduced. The flow_block also needs to
be removed from the driver list from the cleanup path.
Fixes: 00e3889938ef ("net: flow_offload: consolidate indirect flow_block infrastructure") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Thu, 18 Jun 2020 10:13:22 +0000 (12:13 +0200)]
geneve: allow changing DF behavior after creation
Currently, trying to change the DF parameter of a geneve device does
nothing:
# ip -d link show geneve1
14: geneve1: <snip>
link/ether <snip>
geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip>
# ip link set geneve1 type geneve id 1 df unset
# ip -d link show geneve1
14: geneve1: <snip>
link/ether <snip>
geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip>
We just need to update the value in geneve_changelink.
Fixes: 4953faba2e99 ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Manoil [Thu, 18 Jun 2020 09:16:52 +0000 (12:16 +0300)]
enetc: Fix HW_VLAN_CTAG_TX|RX toggling
VLAN tag insertion/extraction offload is correctly
activated at probe time but deactivation of this feature
(i.e. via ethtool) is broken. Toggling works only for
Tx/Rx ring 0 of a PF, and is ignored for the other rings,
including the VF rings.
To fix this, the existing VLAN offload toggling code
was extended to all the rings assigned to a netdevice,
instead of the default ring 0 (likely a leftover from the
early validation days of this feature). And the code was
moved to the common set_features() function to fix toggling
for the VF driver too.
Fixes: 3d1def2125b5 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Beznea [Thu, 18 Jun 2020 08:37:40 +0000 (11:37 +0300)]
net: macb: undo operations in case of failure
Undo previously done operation in case macb_phylink_connect()
fails. Since macb_reset_hw() is the 1st undo operation the
napi_exit label was renamed to reset_hw.
Fixes: 46e1536937ee ("net: macb: convert to phylink") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Jun 2020 20:39:01 +0000 (13:39 -0700)]
Merge branch 'net-phy-MDIO-bus-scanning-fixes'
Florian Fainelli says:
====================
net: phy: MDIO bus scanning fixes
This patch series fixes two problems with the current MDIO bus scanning
logic which was identified while moving from 4.9 to 5.4 on devices that
do rely on scanning the MDIO bus at runtime because they use pluggable
cards.
Changes in v2:
- added comment explaining the special value of -ENODEV
- added Andrew's Reviewed-by tag
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 19 Jun 2020 18:47:47 +0000 (11:47 -0700)]
net: phy: Check harder for errors in get_phy_id()
Commit e78fca321d50 ("net: phy: allow scanning busses with missing
phys") added a special condition to return -ENODEV in case -ENODEV or
-EIO was returned from the first read of the MII_PHYSID1 register.
In case the MDIO bus data line pull-up is not strong enough, the MDIO
bus controller will not flag this as a read error. This can happen when
a pluggable daughter card is not connected and weak internal pull-ups
are used (since that is the only option, otherwise the pins are
floating).
The second read of MII_PHYSID2 will be correctly flagged an error
though, but now we will return -EIO which will be treated as a hard
error, thus preventing MDIO bus scanning loops to continue succesfully.
Apply the same logic to both register reads, thus allowing the scanning
logic to proceed.
Fixes: e78fca321d50 ("net: phy: allow scanning busses with missing phys") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 19 Jun 2020 18:47:46 +0000 (11:47 -0700)]
of: of_mdio: Correct loop scanning logic
Commit 054e388ef1df ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
introduced a break of the loop on the premise that a successful
registration should exit the loop. The premise is correct but not to
code, because rc && rc != -ENODEV is just a special error condition,
that means we would exit the loop even with rc == -ENODEV which is
absolutely not correct since this is the error code to indicate to the
MDIO bus layer that scanning should continue.
Fix this by explicitly checking for rc = 0 as the only valid condition
to break out of the loop.
Fixes: 054e388ef1df ("drivers/of/of_mdio.c:fix of_mdiobus_register()") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / kernel.git / log