netfilter: nft_ct: Remove confirmation check for NFT_CT_ID
Since commit f83d89b7fcc3 ("netfilter: conntrack: Use consistent ct id
hash calculation") the ct id will not change from initialization to
confirmation. Removing the confirmation check allows for things like
adding an element to a 'typeof ct id' set in prerouting upon reception
of the first packet of a new connection, and then being able to
reference that set consistently both before and after the connection
is confirmed.
Fixes: f83d89b7fcc3 ("netfilter: conntrack: Use consistent ct id hash calculation") Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nftables: comment indirect serialization of commit_mutex with rtnl_mutex
Add an explicit comment in the code to describe the indirect
serialization of the holders of the commit_mutex with the rtnl_mutex.
Commit f4f9120f5639 ("netfilter: nf_tables: do not hold reference on
netdevice from preparation phase") already describes this, but a comment
in this case is better for reference.
Reported-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nft_dynset: fix timeouts later than 23 days
Use nf_msecs_to_jiffies64 and nf_jiffies64_to_msecs as provided by ccfdaa45a889 ("netfilter: nf_tables: support timeouts larger than 23
days"), otherwise ruleset listing breaks.
Fixes: fa9236c37e84 ("netfilter: nft_dynset: fix element timeout for HZ != 1000") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: x_tables: Switch synchronization to RCU
When running concurrent iptables rules replacement with data, the per CPU
sequence count is checked after the assignment of the new information.
The sequence count is used to synchronize with the packet path without the
use of any explicit locking. If there are any packets in the packet path using
the table information, the sequence count is incremented to an odd value and
is incremented to an even after the packet process completion.
The new table value assignment is followed by a write memory barrier so every
CPU should see the latest value. If the packet path has started with the old
table information, the sequence counter will be odd and the iptables
replacement will wait till the sequence count is even prior to freeing the
old table info.
However, this assumes that the new table information assignment and the memory
barrier is actually executed prior to the counter check in the replacement
thread. If CPU decides to execute the assignment later as there is no user of
the table information prior to the sequence check, the packet path in another
CPU may use the old table information. The replacement thread would then free
the table information under it leading to a use after free in the packet
processing context-
Unable to handle kernel NULL pointer dereference at virtual
address 000000000000008e
pc : ip6t_do_table+0x5d0/0x89c
lr : ip6t_do_table+0x5b8/0x89c
ip6t_do_table+0x5d0/0x89c
ip6table_filter_hook+0x24/0x30
nf_hook_slow+0x84/0x120
ip6_input+0x74/0xe0
ip6_rcv_finish+0x7c/0x128
ipv6_rcv+0xac/0xe4
__netif_receive_skb+0x84/0x17c
process_backlog+0x15c/0x1b8
napi_poll+0x88/0x284
net_rx_action+0xbc/0x23c
__do_softirq+0x20c/0x48c
This could be fixed by forcing instruction order after the new table
information assignment or by switching to RCU for the synchronization.
Fixes: 1609bc4e9f9a ("netfilter: x_tables: make xt_replace_table wait until old rules are not used anymore") Reported-by: Sean Tranchetti <stranche@codeaurora.org> Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
1) Sysbot reported fixes for the new 64/32 bit compat layer.
From Dmitry Safonov.
2) Fix a memory leak in xfrm_user_policy that was introduced
by adding the 64/32 bit compat layer. From Yu Kuai.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
net: xfrm: fix memory leak in xfrm_user_policy()
xfrm/compat: Don't allocate memory with __GFP_ZERO
xfrm/compat: memset(0) 64-bit padding at right place
xfrm/compat: Translate by copying XFRMA_UNSPEC attribute
====================
net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux
The m250_sel mux clock uses bit 4 in the PRG_ETH0 register. Fix this by
shifting the PRG_ETH0_CLK_M250_SEL_MASK accordingly as the "mask" in
struct clk_mux expects the mask relative to the "shift" field in the
same struct.
While here, get rid of the PRG_ETH0_CLK_M250_SEL_SHIFT macro and use
__ffs() to determine it from the existing PRG_ETH0_CLK_M250_SEL_MASK
macro.
Fixes: 7d521695dcf9d9 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201205213207.519341-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianguo Wu [Sat, 5 Dec 2020 07:56:33 +0000 (15:56 +0800)]
mptcp: print new line in mptcp_seq_show() if mptcp isn't in use
When do cat /proc/net/netstat, the output isn't append with a new line, it looks like this:
[root@localhost ~]# cat /proc/net/netstat
...
MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0[root@localhost ~]#
This is because in mptcp_seq_show(), if mptcp isn't in use, net->mib.mptcp_statistics is NULL,
so it just puts all 0 after "MPTcpExt:", and return, forgot the '\n'.
Joseph Huang [Fri, 4 Dec 2020 23:56:28 +0000 (18:56 -0500)]
bridge: Fix a deadlock when enabling multicast snooping
When enabling multicast snooping, bridge module deadlocks on multicast_lock
if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2
network.
The deadlock was caused by the following sequence: While holding the lock,
br_multicast_open calls br_multicast_join_snoopers, which eventually causes
IP stack to (attempt to) send out a Listener Report (in igmp6_join_group).
Since the destination Ethernet address is a multicast address, br_dev_xmit
feeds the packet back to the bridge via br_multicast_rcv, which in turn
calls br_multicast_add_group, which then deadlocks on multicast_lock.
The fix is to move the call br_multicast_join_snoopers outside of the
critical section. This works since br_multicast_join_snoopers only deals
with IP and does not modify any multicast data structures of the bridge,
so there's no need to hold the lock.
Steps to reproduce:
1. sysctl net.ipv6.conf.all.force_mld_version=1
2. have another querier
3. ip link set dev bridge type bridge mcast_snooping 0 && \
ip link set dev bridge type bridge mcast_snooping 1 < deadlock >
Claudiu Manoil [Fri, 4 Dec 2020 17:15:05 +0000 (19:15 +0200)]
enetc: Fix reporting of h/w packet counters
Noticed some inconsistencies in packet statistics reporting.
This patch adds the missing Tx packet counter registers to
ethtool reporting and fixes the information strings for a
few of them.
Xin Long [Mon, 7 Dec 2020 07:55:40 +0000 (15:55 +0800)]
udp: fix the proto value passed to ip_protocol_deliver_rcu for the segments
Guillaume noticed that: for segments udp_queue_rcv_one_skb() returns the
proto, and it should pass "ret" unmodified to ip_protocol_deliver_rcu().
Otherwize, with a negtive value passed, it will underflow inet_protos.
This can be reproduced with IPIP FOU:
# ip fou add port 5555 ipproto 4
# ethtool -K eth1 rx-gro-list on
Fixes: c1b82510d8bc ("udp: cope with UDP GRO packet misdirection") Reported-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Mon, 7 Dec 2020 07:20:25 +0000 (15:20 +0800)]
net: hns3: remove a misused pragma packed
hclge_dbg_reg_info[] is defined as an array of packed structure
accidentally. However, this array contains pointers, which are
no longer aligned naturally, and cannot be relocated on PPC64.
Hence, when compile-testing this driver on PPC64 with
CONFIG_RELOCATABLE=y (e.g. PowerPC allyesconfig), there will be
some warnings.
Since each field in structure hclge_qos_pri_map_cmd and
hclge_dbg_bitmap_cmd is type u8, the pragma packed is unnecessary
for these two structures as well, so remove the pragma packed in
hclge_debugfs.h to fix this issue, and this increases
hclge_dbg_reg_info[] by 4 bytes per entry.
Fixes: 4f9f375130ae ("net: hns3: code optimization for debugfs related to "dump reg"") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 4 Dec 2020 17:54:16 +0000 (19:54 +0200)]
net: mscc: ocelot: fix dropping of unknown IPv4 multicast on Seville
The current assumption is that the felix DSA driver has flooding knobs
per traffic class, while ocelot switchdev has a single flooding knob.
This was correct for felix VSC9959 and ocelot VSC7514, but with the
introduction of seville VSC9953, we see a switch driven by felix.c which
has a single flooding knob.
So it is clear that we must do what should have been done from the
beginning, which is not to overwrite the configuration done by ocelot.c
in felix, but instead to teach the common ocelot library about the
differences in our switches, and set up the flooding PGIDs centrally.
The effect that the bogus iteration through FELIX_NUM_TC has upon
seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and
ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will
actually overwrite ANA_FLOODING_IPMC when attempting to write
ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING.
And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect
is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D:
MC6_DATA = 61,
MC6_CTRL = 61,
MC4_DATA = 60,
MC4_CTRL = 0.
Because MC4_CTRL is zero, this means that IPv4 multicast control packets
are not flooded, but dropped. An invalid configuration, and this is how
the issue was actually spotted.
Reported-by: Eldar Gasanov <eldargasanov2@gmail.com> Reported-by: Maxim Kochetkov <fido_max@inbox.ru> Tested-by: Eldar Gasanov <eldargasanov2@gmail.com> Fixes: a83ee1de50e3 ("net: dsa: felix: introduce support for Seville VSC9953 switch") Fixes: e8e426378fa1 ("net: dsa: felix: allow flooding for all traffic classes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vrf: packets with lladdr src needs dst at input with orig_iif when needs strict
Depending on the order of the routes to fe80::/64 are installed on the
VRF table, the NS for the source link-local address of the originator
might be sent to the wrong interface.
This patch ensures that packets with link-local addr source is doing a
lookup with the orig_iif when the destination addr indicates that it
is strict.
Add the reproducer as a use case in self test script fcnal-test.sh.
Fixes: 64be4b5c1ffe ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201204030604.18828-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Thu, 3 Dec 2020 22:26:16 +0000 (23:26 +0100)]
ch_ktls: fix build warning for ipv4-only config
When CONFIG_IPV6 is disabled, clang complains that a variable
is uninitialized for non-IPv4 data:
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1046:6: error: variable 'cntrl1' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (tx_info->ip_family == AF_INET) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1059:2: note: uninitialized use occurs here
cntrl1 |= T6_TXPKT_ETHHDR_LEN_V(maclen - ETH_HLEN) |
^~~~~~
Replace the preprocessor conditional with the corresponding C version,
and make the ipv4 case unconditional in this configuration to improve
readability and avoid the warning.
net: bridge: vlan: fix error return code in __vlan_add()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: f5a36f4cd3da ("bridge: vlan: use br_vlan_(get|put)_master to deal with refcounts") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/1607071737-33875-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Thu, 3 Dec 2020 23:20:37 +0000 (00:20 +0100)]
ethernet: select CONFIG_CRC32 as needed
A number of ethernet drivers require crc32 functionality to be
avaialable in the kernel, causing a link error otherwise:
arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast':
et131x.c:(.text+0x5918): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit':
macb_main.c:(.text+0x4b88): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode':
ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list':
fec_main.c:(.text+0x6120): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address':
fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow
arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read':
nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire':
nfp_resource.c:(.text+0x144): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be'
arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list':
lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do':
rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del':
rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb':
arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index':
dr_ste.c:(.text+0x354): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast':
lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le'
Add the missing 'select CRC32' entries in Kconfig for each of them.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Acked-by: Mark Einon <mark.einon@gmail.com> Acked-by: Simon Horman <simon.horman@netronome.com> Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 3 Dec 2020 21:51:06 +0000 (15:51 -0600)]
net: ipa: pass the correct size when freeing DMA memory
When the coherent memory is freed in gsi_trans_pool_exit_dma(), we
are mistakenly passing the size of a single element in the pool
rather than the actual allocated size. Fix this bug.
Fixes: cf4df06df2d31 ("soc: qcom: ipa: GSI transactions") Reported-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Sujit Kautkar <sujitka@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201203215106.17450-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti [Thu, 3 Dec 2020 18:40:47 +0000 (19:40 +0100)]
net/sched: fq_pie: initialize timer earlier in fq_pie_init()
with the following tdc testcase:
83be: (qdisc, fq_pie) Create FQ-PIE with invalid number of flows
as fq_pie_init() fails, fq_pie_destroy() is called to clean up. Since the
timer is not yet initialized, it's possible to observe a splat like this:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 975 Comm: tc Not tainted 5.10.0-rc4+ #298
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x99/0xcb
register_lock_class+0x12dd/0x1750
__lock_acquire+0xfe/0x3970
lock_acquire+0x1c8/0x7f0
del_timer_sync+0x49/0xd0
fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
qdisc_create+0x916/0x1160
tc_modify_qdisc+0x3c4/0x1630
rtnetlink_rcv_msg+0x346/0x8e0
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
[...]
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
WARNING: CPU: 0 PID: 975 at lib/debugobjects.c:508 debug_print_object+0x162/0x210
[...]
Call Trace:
debug_object_assert_init+0x268/0x380
try_to_del_timer_sync+0x6a/0x100
del_timer_sync+0x9e/0xd0
fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
qdisc_create+0x916/0x1160
tc_modify_qdisc+0x3c4/0x1630
rtnetlink_rcv_msg+0x346/0x8e0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
fix it moving timer_setup() before any failure, like it was done on 'red'
with former commit c04f1468056d ("net_sched: initialize timer earlier in
red_init()").
Jakub Kicinski [Fri, 4 Dec 2020 19:26:28 +0000 (11:26 -0800)]
Merge tag 'mac80211-for-net-2020-12-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Three small fixes:
* initialize some data to avoid using stack garbage
* fix 6 GHz channel selection in mac80211
* correctly restart monitor mode interfaces in mac80211
* tag 'mac80211-for-net-2020-12-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: set SDATA_STATE_RUNNING for monitor interfaces
cfg80211: initialize rekey_data
mac80211: fix return value of ieee80211_chandef_he_6ghz_oper
====================
mac80211: set SDATA_STATE_RUNNING for monitor interfaces
During restarrt, mac80211 is supposed to reconfigure the driver.
When there's a monitor interface, the interface is added and the
channel context for it was created, but not assigned to it as it
was not considered running during the restart.
Fix this by setting SDATA_STATE_RUNNING while adding monitor
interfaces.
Linus Torvalds [Thu, 3 Dec 2020 21:10:11 +0000 (13:10 -0800)]
Merge tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc7, including fixes from bpf, netfilter,
wireless drivers, wireless mesh and can.
Current release - regressions:
- mt76: usb: fix crash on device removal
Current release - always broken:
- xsk: Fix umem cleanup from wrong context in socket destruct
Previous release - regressions:
- net: ip6_gre: set dev->hard_header_len when using header_ops
* tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering
net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS
net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled
net/mlx5: Fix wrong address reclaim when command interface is down
net/sched: act_mpls: ensure LSE is pullable before reading it
net: openvswitch: ensure LSE is pullable before reading it
net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl
net: mvpp2: Fix error return code in mvpp2_open()
chelsio/chtls: fix a double free in chtls_setkey()
rtw88: debug: Fix uninitialized memory in debugfs code
vxlan: fix error return code in __vxlan_dev_create()
net: pasemi: fix error return code in pasemi_mac_open()
cxgb3: fix error return code in t3_sge_alloc_qset()
net/x25: prevent a couple of overflows
dpaa_eth: copy timestamp fields to new skb in A-050385 workaround
net: ip6_gre: set dev->hard_header_len when using header_ops
mt76: usb: fix crash on device removal
iwlwifi: pcie: add some missing entries for AX210
iwlwifi: pcie: invert values of NO_160 device config entries
iwlwifi: pcie: add one missing entry for AX210
...
Linus Torvalds [Thu, 3 Dec 2020 19:58:26 +0000 (11:58 -0800)]
Merge tag 's390-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
"One commit is fixing lockdep irq state tracing which broke with -rc6.
The other one fixes logical vs physical CPU address mixup in our PCI
code.
Summary:
- fix lockdep irq state tracing
- fix logical vs physical CPU address confusion in PCI code"
* tag 's390-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix irq state tracing
s390/pci: fix CPU address in MSI for directed IRQ
net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering
STEs format for Connect-X5 and Connect-X6DX different. Currently, on
Connext-X6DX the SW steering would break at some point when building STEs
w/o giving a proper error message. Fix this by checking the STE format of
the current device when initializing domain: add mlx5_ifc definitions for
Connect-X6DX SW steering, read FW capability to get the current format
version, and check this version when domain is being created.
Tariq Toukan [Thu, 3 Dec 2020 04:39:45 +0000 (20:39 -0800)]
net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS
Checksum calculation cannot be done in SW for TX kTLS HW offloaded
packets.
Offload it to the device, disregard the declared state of the TX
csum offload feature.
Randy Dunlap [Thu, 3 Dec 2020 04:39:44 +0000 (20:39 -0800)]
net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled
Fix build when CONFIG_IPV6 is not enabled by making a function
be built conditionally.
Fixes these build errors and warnings:
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c: In function 'accel_fs_tcp_set_ipv6_flow':
../include/net/sock.h:380:34: error: 'struct sock_common' has no member named 'skc_v6_daddr'; did you mean 'skc_daddr'?
380 | #define sk_v6_daddr __sk_common.skc_v6_daddr
| ^~~~~~~~~~~~
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:55:14: note: in expansion of macro 'sk_v6_daddr'
55 | &sk->sk_v6_daddr, 16);
| ^~~~~~~~~~~
At top level:
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:47:13: warning: 'accel_fs_tcp_set_ipv6_flow' defined but not used [-Wunused-function]
47 | static void accel_fs_tcp_set_ipv6_flow(struct mlx5_flow_spec *spec, struct sock *sk)
Fixes: 517bc14b5c15 ("net/mlx5e: Accel, Expose flow steering API for rules add/del") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eran Ben Elisha [Thu, 3 Dec 2020 04:39:43 +0000 (20:39 -0800)]
net/mlx5: Fix wrong address reclaim when command interface is down
When command interface is down, driver to reclaim all 4K page chucks that
were hold by the Firmeware. Fix a bug for 64K page size systems, where
driver repeatedly released only the first chunk of the page.
Define helper function to fill 4K chunks for a given Firmware pages.
Iterate over all unreleased Firmware pages and call the hepler per each.
Fixes: 514c662c4e95 ("net/mlx5: Fix incorrect page count when in internal error") Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti [Thu, 3 Dec 2020 09:37:52 +0000 (10:37 +0100)]
net/sched: act_mpls: ensure LSE is pullable before reading it
when 'act_mpls' is used to mangle the LSE, the current value is read from
the packet dereferencing 4 bytes at mpls_hdr(): ensure that the label is
contained in the skb "linear" area.
Found by code inspection.
v2:
- use MPLS_HLEN instead of sizeof(new_lse), thanks to Jakub Kicinski
Davide Caratti [Thu, 3 Dec 2020 09:46:06 +0000 (10:46 +0100)]
net: openvswitch: ensure LSE is pullable before reading it
when openvswitch is configured to mangle the LSE, the current value is
read from the packet dereferencing 4 bytes at mpls_hdr(): ensure that
the label is contained in the skb "linear" area.
Davide Caratti [Thu, 3 Dec 2020 09:58:21 +0000 (10:58 +0100)]
net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl
skb_mpls_dec_ttl() reads the LSE without ensuring that it is contained in
the skb "linear" area. Fix this calling pskb_may_pull() before reading the
current ttl.
Wang Hai [Thu, 3 Dec 2020 14:18:06 +0000 (22:18 +0800)]
net: mvpp2: Fix error return code in mvpp2_open()
Fix to return negative error code -ENOENT from invalid configuration
error handling case instead of 0, as done elsewhere in this function.
Fixes: 030bc6b767a7 ("net: mvpp2: phylink support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201203141806.37966-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Thu, 3 Dec 2020 08:44:31 +0000 (11:44 +0300)]
chelsio/chtls: fix a double free in chtls_setkey()
The "skb" is freed by the transmit code in cxgb4_ofld_send() and we
shouldn't use it again. But in the current code, if we hit an error
later on in the function then the clean up code will call kfree_skb(skb)
and so it causes a double free.
Set the "skb" to NULL and that makes the kfree_skb() a no-op.
Fixes: 819d3b8d1abf ("crypto: chtls - Program the TLS session Key") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8ilb6PtBRLWiSHp@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pwm: sl28cpld: fix getting driver data in pwm callbacks
Currently .get_state() and .apply() use dev_get_drvdata() on the struct
device related to the pwm chip. This only works after .probe() called
platform_set_drvdata() which in this driver happens only after
pwmchip_add() and so comes possibly too late.
Instead of setting the driver data earlier use the traditional
container_of approach as this way the driver data is conceptually and
computational nearer.
Fixes: 698ff6913793 ("pwm: Add support for sl28cpld PWM controller") Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Willy Tarreau [Mon, 30 Nov 2020 07:36:48 +0000 (08:36 +0100)]
lib/syscall: fix syscall registers retrieval on 32-bit platforms
Lilith >_> and Claudio Bozzato of Cisco Talos security team reported
that collect_syscall() improperly casts the syscall registers to 64-bit
values leaking the uninitialized last 24 bytes on 32-bit platforms, that
are visible in /proc/self/syscall.
The cause is that info->data.args are u64 while syscall_get_arguments()
uses longs, as hinted by the bogus pointer cast in the function.
Let's just proceed like the other call places, by retrieving the
registers into an array of longs before assigning them to the caller's
array. This was successfully tested on x86_64, i386 and ppc32.
Dan Carpenter [Thu, 3 Dec 2020 08:43:37 +0000 (11:43 +0300)]
rtw88: debug: Fix uninitialized memory in debugfs code
This code does not ensure that the whole buffer is initialized and none
of the callers check for errors so potentially none of the buffer is
initialized. Add a memset to eliminate this bug.
Fixes: febe62489926 ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X8ilOfVz3pf0T5ec@mwanda
Dan Carpenter [Tue, 1 Dec 2020 15:15:12 +0000 (18:15 +0300)]
net/x25: prevent a couple of overflows
The .x25_addr[] address comes from the user and is not necessarily
NUL terminated. This leads to a couple problems. The first problem is
that the strlen() in x25_bind() can read beyond the end of the buffer.
The second problem is more subtle and could result in memory corruption.
The call tree is:
x25_connect()
--> x25_write_internal()
--> x25_addr_aton()
The .x25_addr[] buffers are copied to the "addresses" buffer from
x25_write_internal() so it will lead to stack corruption.
Verify that the strings are NUL terminated and return -EINVAL if they
are not.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: 6be342c59b28 ("X25: Dont let x25_bind use addresses containing characters") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/X8ZeAKm8FnFpN//B@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 3 Dec 2020 01:25:23 +0000 (17:25 -0800)]
Merge tag 'gfs2-v5.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"
* tag 'gfs2-v5.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix deadlock between gfs2_{create_inode,inode_lookup} and delete_work_func
gfs2: Upgrade shared glocks for atime updates
gfs2: Don't freeze the file system during unmount
gfs2: check for empty rgrp tree in gfs2_ri_update
gfs2: set lockdep subclass for iopen glocks
gfs2: Fix deadlock dumping resource group glocks
Linus Torvalds [Wed, 2 Dec 2020 20:27:37 +0000 (12:27 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I'm sad to say that we've got an unusually large arm64 fixes pull for
rc7 which addresses numerous significant instrumentation issues with
our entry code.
Without these patches, lockdep is hopelessly unreliable in some
configurations [1,2] and syzkaller is therefore not a lot of use
because it's so noisy.
Although much of this has always been broken, it appears to have been
exposed more readily by other changes such as 3ad1b03e1e0a ("lockdep:
Only trace IRQ edges") and general lockdep improvements around IRQ
tracing and NMIs.
Fixing this properly required moving much of the instrumentation hooks
from our entry assembly into C, which Mark has been working on for the
last few weeks. We're not quite ready to move to the recently added
generic functions yet, but the code here has been deliberately written
to mimic that closely so we can look at cleaning things up once we
have a bit more breathing room.
Having said all that, the second version of these patches was posted
last week and I pushed it into our CI (kernelci and cki) along with a
commit which forced on PROVE_LOCKING, NOHZ_FULL and
CONTEXT_TRACKING_FORCE. The result? We found a real bug in the
md/raid10 code [3].
Oh, and there's also a really silly typo patch that's unrelated.
Summary:
- Fix numerous issues with instrumentation and exception entry
- Fix hideous typo in unused register field definition"
Linus Torvalds [Wed, 2 Dec 2020 20:14:03 +0000 (12:14 -0800)]
Merge tag 'sound-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are the pending sound fixes for 5.10: all small device-specific
fixes, and nothing particular stands out, so far"
* tag 'sound-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add mute LED quirk to yet another HP x360 model
ALSA: hda/realtek: Fix bass speaker DAC assignment on Asus Zephyrus G14
ALSA: hda/generic: Add option to enforce preferred_dacs pairs
ALSA: usb-audio: US16x08: fix value count for level meters
ALSA: hda/realtek - Add new codec supported for ALC897
ASoC: rt5682: change SAR voltage threshold
ASoC: wm_adsp: fix error return code in wm_adsp_load()
ALSA: hda/realtek: Enable headset of ASUS UX482EG & B9400CEA with ALC294
ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state
ALSA: hda/realtek - Fixed Dell AIO wrong sound tone
ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks
Linus Torvalds [Wed, 2 Dec 2020 20:09:36 +0000 (12:09 -0800)]
Merge tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull bootconfig fixes from Steven Rostedt:
"Have bootconfig size and checksum be little endian
In case the bootconfig is created on one kind of endian machine, and
then read on the other kind of endian kernel, the size and checksum
will be incorrect. Instead, have both the size and checksum always be
little endian and have the tool and the kernel convert it from little
endian to or from the host endian"
* tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
docs: bootconfig: Add the endianness of fields
tools/bootconfig: Store size and checksum in footer as le32
bootconfig: Load size and checksum in the footer as le32
Antoine Tenart [Mon, 30 Nov 2020 16:19:11 +0000 (17:19 +0100)]
net: ip6_gre: set dev->hard_header_len when using header_ops
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:
skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:109!
Call Trace:
skb_push+0x10/0x10
ip6gre_header+0x47/0x1b0
neigh_connected_output+0xae/0xf0
ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.
Fixes: 9795faeeef94 ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap") Cc: Maria Pasechnik <mariap@mellanox.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix that by adding while loop again. We need loop, not just single
check, to clean all pending entries.
Additionally move mt76_worker_disable/enable after !mt76_has_tx_pending()
as we want to tx_worker to run to process tx queues, while we wait for
exactly that.
I was a bit worried about accessing q->queued without lock, but
mt76_worker_disable() -> kthread_park() should assure this value will
be seen updated on other cpus.
Fixes: b4b44f7712ef ("mt76: unify queue tx cleanup code") Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201126125520.72912-1-stf_xl@wp.pl
Luca Coelho [Wed, 2 Dec 2020 12:41:50 +0000 (14:41 +0200)]
iwlwifi: pcie: invert values of NO_160 device config entries
The NO_160 flag specifies if the device doesn't have 160 MHz support,
but we errorneously assumed the opposite. If the flag was set, we
were considering that 160 MHz was supported, but it's actually the
opposite. Fix it by inverting the bits, i.e. NO_160 is 0x1 and 160
is 0x0.
Johannes Berg [Sun, 29 Nov 2020 13:14:38 +0000 (15:14 +0200)]
iwlwifi: update MAINTAINERS entry
Reflect the fact that the linuxwifi@intel.com address will disappear,
and that neither Emmanuel nor myself are really much involved with
the maintenance these days.
Heiko Carstens [Wed, 2 Dec 2020 10:46:01 +0000 (11:46 +0100)]
s390: fix irq state tracing
With commit adde78952f2b ("sched/idle: Fix arch_cpu_idle() vs
tracing") common code calls arch_cpu_idle() with a lockdep state that
tells irqs are on.
This doesn't work very well for s390: psw_idle() will enable interrupts
to wait for an interrupt. As soon as an interrupt occurs the interrupt
handler will verify if the old context was psw_idle(). If that is the
case the interrupt enablement bits in the old program status word will
be cleared.
A subsequent test in both the external as well as the io interrupt
handler checks if in the old context interrupts were enabled. Due to
the above patching of the old program status word it is assumed the
old context had interrupts disabled, and therefore a call to
TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in
turn makes lockdep incorrectly "think" that interrupts are enabled
within the interrupt handler.
Fix this by unconditionally calling TRACE_IRQS_OFF when entering
interrupt handlers. Also call unconditionally TRACE_IRQS_ON when
leaving interrupts handlers.
This leaves the special psw_idle() case, which now returns with
interrupts disabled, but has an "irqs on" lockdep state. So callers of
psw_idle() must adjust the state on their own, if required. This is
currently only __udelay_disabled().
Fixes: adde78952f2b ("sched/idle: Fix arch_cpu_idle() vs tracing") Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The directed MSIs are delivered to CPUs whose address is
written to the MSI message address. The current code assumes
that a CPU logical number (as it is seen by the kernel)
is also the CPU address.
The above assumption is not correct, as the CPU address
is rather the value returned by STAP instruction. That
value does not necessarily match the kernel logical CPU
number.
Fixes: 50f3b167d5dc ("s390/pci: provide support for CPU directed interrupts") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Randy Dunlap [Sat, 28 Nov 2020 21:39:05 +0000 (13:39 -0800)]
vdpa: mlx5: fix vdpa/vhost dependencies
drivers/vdpa/mlx5/ uses vhost_iotlb*() interfaces, so select
VHOST_IOTLB to make them be built.
However, if VHOST_IOTLB is the only VHOST symbol that is
set/enabled, the object file still won't be built because
drivers/Makefile won't descend into drivers/vhost/ to build it,
so make drivers/Makefile build the needed binary whenever
VHOST_IOTLB is set, like it does for VHOST_RING.
Fixes: ce866aa34fff ("vdpa/mlx5: Add support library for mlx5 VDPA implementation") Fixes: a6b68e425bd6 ("vdpa/mlx5: Fix dependency on MLX5_CORE") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Eli Cohen <eli@mellanox.com> Cc: Parav Pandit <parav@mellanox.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leonro@nvidia.com> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20201128213905.27409-1-rdunlap@infradead.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Eric Dumazet [Tue, 1 Dec 2020 09:05:07 +0000 (01:05 -0800)]
geneve: pull IP header before ECN decapsulation
IP_ECN_decapsulate() and IP6_ECN_decapsulate() assume
IP header is already pulled.
geneve does not ensure this yet.
Fixing this generically in IP_ECN_decapsulate() and
IP6_ECN_decapsulate() is not possible, since callers
pass a pointer that might be freed by pskb_may_pull()
inet_ecn: Fix endianness of checksum update when setting ECT(1)
When adding support for propagating ECT(1) marking in IP headers it seems I
suffered from endianness-confusion in the checksum update calculation: In
fact the ECN field is in the *lower* bits of the first 16-bit word of the
IP header when calculating in network byte order. This means that the
addition performed to update the checksum field was wrong; let's fix that.
Fixes: 2732061e4836 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Reported-by: Jonathan Morton <chromatix99@gmail.com> Tested-by: Pete Heist <pete@heistp.net> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20201130183705.17540-1-toke@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 1 Dec 2020 23:43:53 +0000 (15:43 -0800)]
Merge tag '5.10-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two smb3 fixes for stable"
* tag '5.10-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix potential use-after-free in cifs_echo_request()
cifs: allow syscalls to be restarted in __smb_send_rqst()
Linus Torvalds [Tue, 1 Dec 2020 23:30:18 +0000 (15:30 -0800)]
Merge tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
* tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always check to put back before stamp when crossing pages
ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
ftrace: Fix updating FTRACE_FL_TRAMP
tracing: Fix alignment of static buffer
tracing: Remove WARN_ON in start_thread()
samples/ftrace: Mark my_tramp[12]? global
ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()
ring-buffer: Update write stamp with the correct ts
docs: bootconfig: Update file format on initrd image
tools/bootconfig: Align the bootconfig applied initrd image size to 4
tools/bootconfig: Fix to check the write failure correctly
tools/bootconfig: Fix errno reference after printf()
Hoang Le [Mon, 30 Nov 2020 02:55:44 +0000 (09:55 +0700)]
tipc: fix incompatible mtu of transmission
In commit 8965480c813db
("tipc: confgiure and apply UDP bearer MTU on running links"), we
introduced a function to change UDP bearer MTU and applied this new value
across existing per-link. However, we did not apply this new MTU value at
node level. This lead to packet dropped at link level if its size is
greater than new MTU value.
To fix this issue, we also apply this new MTU value for node level.
Fixes: 8965480c813db ("tipc: confgiure and apply UDP bearer MTU on running links") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20201130025544.3602-1-hoang.h.le@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
ibmvnic: Bug fixes for queue descriptor processing
This series resolves a few issues in the ibmvnic driver's
RX buffer and TX completion processing. The first patch
includes memory barriers to synchronize queue descriptor
reads. The second patch fixes a memory leak that could
occur if the device returns a TX completion with an error
code in the descriptor, in which case the respective socket
buffer and other relevant data structures may not be freed
or updated properly.
v3: Correct length of Fixes tags, requested by Jakub Kicinski
v2: Provide more detailed comments explaining specifically what
reads are being ordered, suggested by Michael Ellerman
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Tue, 1 Dec 2020 15:52:11 +0000 (09:52 -0600)]
ibmvnic: Fix TX completion error handling
TX completions received with an error return code are not
being processed properly. When an error code is seen, do not
proceed to the next completion before cleaning up the existing
entry's data structures.
Fixes: ea6726eed812 ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Tue, 1 Dec 2020 15:52:10 +0000 (09:52 -0600)]
ibmvnic: Ensure that SCRQ entry reads are correctly ordered
Ensure that received Subordinate Command-Response Queue (SCRQ)
entries are properly read in order by the driver. These queues
are used in the ibmvnic device to process RX buffer and TX completion
descriptors. dma_rmb barriers have been added after checking for a
pending descriptor to ensure the correct descriptor entry is checked
and after reading the SCRQ descriptor to ensure the entire
descriptor is read before processing.
Fixes: ea6726eed812 ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The v9fs file operations were missing the splice_read operations, which
breaks sendfile() of files on such a filesystem. I discovered this while
trying to load an eBPF program using iproute2 inside a 'virtme' environment
which uses 9pfs for the virtual file system. iproute2 relies on sendfile()
with an AF_ALG socket to hash files, which was erroring out in the virtual
environment.
Since generic_file_splice_read() seems to just implement splice_read in
terms of the read_iter operation, I simply added the generic implementation
to the file operations, which fixed the error I was seeing. A quick grep
indicates that this is what most other file systems do as well.
Masami Hiramatsu [Fri, 20 Nov 2020 02:29:22 +0000 (11:29 +0900)]
docs: bootconfig: Add the endianness of fields
Add a description about the endianness of the size and the checksum
fields. Those must be stored as le32 instead of u32. This will allow
us to apply bootconfig to the cross build initrd without caring
the endianness.
Masami Hiramatsu [Fri, 20 Nov 2020 02:29:13 +0000 (11:29 +0900)]
tools/bootconfig: Store size and checksum in footer as le32
Store the size and the checksum fields in the footer as le32
instead of u32. This will allow us to apply bootconfig to the
cross build initrd without caring the endianness.
Masami Hiramatsu [Fri, 20 Nov 2020 02:29:04 +0000 (11:29 +0900)]
bootconfig: Load size and checksum in the footer as le32
Load the size and the checksum fields in the footer as le32
instead of u32. This will allow us to apply bootconfig to the
cross build initrd without caring the endianness.
ring-buffer: Always check to put back before stamp when crossing pages
The current ring buffer logic checks to see if the updating of the event
buffer was interrupted, and if it is, it will try to fix up the before stamp
with the write stamp to make them equal again. This logic is flawed, because
if it is not interrupted, the two are guaranteed to be different, as the
current event just updated the before stamp before allocation. This
guarantees that the next event (this one or another interrupting one) will
think it interrupted the time updates of a previous event and inject an
absolute time stamp to compensate.
The correct logic is to always update the timestamps when traversing to a
new sub buffer.
Cc: stable@vger.kernel.org Fixes: e6cc5f23410ef ("ring-buffer: Have nested events still record running time stamp") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Jakub Kicinski [Tue, 1 Dec 2020 03:03:48 +0000 (19:03 -0800)]
Merge tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-30
The first patch is by me an target the tcan4x5x bindings for the m_can driver.
It fixes the error path in the tcan4x5x_can_probe() function.
The next two patches are by Jeroen Hofstee and makes the lost of arbitration
error counters of sja1000 and the sun4i drivers consistent with the other
drivers.
Zhang Qilong contributes two patch that clean up the error path in the c_can
and kvaser_pciefd drivers.
* tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling
can: c_can: c_can_power_up(): fix error handling
can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error
can: sja1000: sja1000_err(): don't count arbitration lose as an error
can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare()
====================
Naveen N. Rao [Thu, 26 Nov 2020 18:08:38 +0000 (23:38 +0530)]
ftrace: Fix updating FTRACE_FL_TRAMP
On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in
ftrace_get_addr_new() followed by the below message:
Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001)
The set of steps leading to this involved:
- modprobe ftrace-direct-too
- enable_probe
- modprobe ftrace-direct
- rmmod ftrace-direct <-- trigger
The problem turned out to be that we were not updating flags in the
ftrace record properly. From the above message about the trampoline
accounting being bad, it can be seen that the ftrace record still has
FTRACE_FL_TRAMP set though ftrace-direct module is going away. This
happens because we are checking if any ftrace_ops has the
FTRACE_FL_TRAMP flag set _before_ updating the filter hash.
The fix for this is to look for any _other_ ftrace_ops that also needs
FTRACE_FL_TRAMP.
Minchan Kim [Wed, 25 Nov 2020 22:56:54 +0000 (14:56 -0800)]
tracing: Fix alignment of static buffer
With 5.9 kernel on ARM64, I found ftrace_dump output was broken but
it had no problem with normal output "cat /sys/kernel/debug/tracing/trace".
With investigation, it seems coping the data into temporal buffer seems to
break the align binary printf expects if the static buffer is not aligned
with 4-byte. IIUC, get_arg in bstr_printf expects that args has already
right align to be decoded and seq_buf_bprintf says ``the arguments are saved
in a 32bit word array that is defined by the format string constraints``.
So if we don't keep the align under copy to temporal buffer, the output
will be broken by shifting some bytes.
This patch fixes it.
Link: https://lkml.kernel.org/r/20201125225654.1618966-1-minchan@kernel.org Cc: <stable@vger.kernel.org> Fixes: d2f84cc688f00 ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
triggers warning in dmesg:
WARNING: CPU: 3 PID: 1403 at kernel/trace/trace_hwlat.c:371 hwlat_tracer_start+0xc9/0xd0
Link: https://lkml.kernel.org/r/bd4d3e70-400d-9c82-7b73-a2d695e86b58@virtuozzo.com Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 5b0fb833cce1 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Sami Tolvanen [Fri, 13 Nov 2020 18:34:14 +0000 (10:34 -0800)]
samples/ftrace: Mark my_tramp[12]? global
my_tramp[12]? are declared as global functions in C, but they are not
marked global in the inline assembly definition. This mismatch confuses
Clang's Control-Flow Integrity checking. Fix the definitions by adding
.globl.
Link: https://lkml.kernel.org/r/20201113183414.1446671-1-samitolvanen@google.com Fixes: 90aff38349e00 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Sven Eckelmann [Thu, 26 Nov 2020 12:52:47 +0000 (13:52 +0100)]
vxlan: Copy needed_tailroom from lowerdev
While vxlan doesn't need any extra tailroom, the lowerdev might need it. In
that case, copy it over to reduce the chance for additional (re)allocations
in the transmit path.
Sven Eckelmann [Thu, 26 Nov 2020 12:52:46 +0000 (13:52 +0100)]
vxlan: Add needed_headroom for lower device
It was observed that sending data via batadv over vxlan (on top of
wireguard) reduced the performance massively compared to raw ethernet or
batadv on raw ethernet. A check of perf data showed that the
vxlan_build_skb was calling all the time pskb_expand_head to allocate
enough headroom for:
But the vxlan_config_apply only requested needed headroom for:
lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM
So it completely ignored the needed_headroom of the lower device. The first
caller of net_dev_xmit could therefore never make sure that enough headroom
was allocated for the rest of the transmit path.
chelsio/chtls: fix panic during unload reload chtls
there is kernel panic in inet_twsk_free() while chtls
module unload when socket is in TIME_WAIT state because
sk_prot_creator was not preserved on connection socket.
gfs2: Fix deadlock between gfs2_{create_inode,inode_lookup} and delete_work_func
In gfs2_create_inode and gfs2_inode_lookup, make sure to cancel any pending
delete work before taking the inode glock. Otherwise, gfs2_cancel_delete_work
may block waiting for delete_work_func to complete, and delete_work_func may
block trying to acquire the inode glock in gfs2_inode_lookup.
Reported-by: Alexander Aring <aahringo@redhat.com> Fixes: c754225effa0 ("gfs2: Turn gl_delete into a delayed work") Cc: stable@vger.kernel.org # v5.8+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
thread 2 (workqueue)
--------
apic_timer_interrupt()
smp_apic_timer_interrupt()
irq_exit()
__do_softirq()
run_timer_softirq()
call_timer_fn()
cifs_echo_request() <- use-after-free in server ptr
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Sat, 28 Nov 2020 18:57:06 +0000 (15:57 -0300)]
cifs: allow syscalls to be restarted in __smb_send_rqst()
A customer has reported that several files in their multi-threaded app
were left with size of 0 because most of the read(2) calls returned
-EINTR and they assumed no bytes were read. Obviously, they could
have fixed it by simply retrying on -EINTR.
We noticed that most of the -EINTR on read(2) were due to real-time
signals sent by glibc to process wide credential changes (SIGRT_1),
and its signal handler had been established with SA_RESTART, in which
case those calls could have been automatically restarted by the
kernel.
Let the kernel decide to whether or not restart the syscalls when
there is a signal pending in __smb_send_rqst() by returning
-ERESTARTSYS. If it can't, it will return -EINTR anyway.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Andrea Righi [Sat, 28 Nov 2020 09:15:17 +0000 (10:15 +0100)]
ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()
In the slow path of __rb_reserve_next() a nested event(s) can happen
between evaluating the timestamp delta of the current event and updating
write_stamp via local_cmpxchg(); in this case the delta is not valid
anymore and it should be set to 0 (same timestamp as the interrupting
event), since the event that we are currently processing is not the last
event in the buffer.
Link: https://lkml.kernel.org/r/X8IVJcp1gRE+FJCJ@xps-13-7390 Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Link: https://lwn.net/Articles/831207 Fixes: e6cc5f23410e ("ring-buffer: Have nested events still record running time stamp") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ring-buffer: Update write stamp with the correct ts
The write stamp, used to calculate deltas between events, was updated with
the stale "ts" value in the "info" structure, and not with the updated "ts"
variable. This caused the deltas between events to be inaccurate, and when
crossing into a new sub buffer, had time go backwards.
Link: https://lkml.kernel.org/r/20201124223917.795844-1-elavila@google.com Cc: stable@vger.kernel.org Fixes: e6cc5f23410ef ("ring-buffer: Have nested events still record running time stamp") Reported-by: "J. Avila" <elavila@google.com> Tested-by: Daniel Mentz <danielmentz@google.com> Tested-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Mark Rutland [Mon, 30 Nov 2020 11:59:50 +0000 (11:59 +0000)]
arm64: entry: fix EL1 debug transitions
In debug_exception_enter() and debug_exception_exit() we trace hardirqs
on/off while RCU isn't guaranteed to be watching, and we don't save and
restore the hardirq state, and so may return with this having changed.
Handle this appropriately with new entry/exit helpers which do the bare
minimum to ensure this is appropriately maintained, without marking
debug exceptions as NMIs. These are placed in entry-common.c with the
other entry/exit helpers.
In future we'll want to reconsider whether some debug exceptions should
be NMIs, but this will require a significant refactoring, and for now
this should prevent issues with lockdep and RCU.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marins <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-12-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
... but currently debug exceptions (BRKs, breakpoints, watchpoints,
single-step) are not considered NMIs.
As these can be taken at any time, kernel features (lockdep, RCU,
ftrace) may not be in a consistent kernel state. For example, we may
take an NMI from the idle code or partway through an entry/exit path.
While nmi_enter() and nmi_exit() handle most of this state, notably they
don't save/restore the lockdep state across an NMI being taken and
handled. When interrupts are enabled and an NMI is taken, lockdep may
see interrupts become disabled within the NMI code, but not see
interrupts become enabled when returning from the NMI, leaving lockdep
believing interrupts are disabled when they are actually disabled.
The x86 code handles this in idtentry_{enter,exit}_nmi(), which will
shortly be moved to the generic entry code. As we can't use either yet,
we copy the x86 approach in arm64-specific helpers. All the NMI
entrypoints are marked as noinstr to prevent any instrumentation
handling code being invoked before the state has been corrected.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-11-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
There are periods in kernel mode when RCU is not watching and/or the
scheduler tick is disabled, but we can still take exceptions such as
interrupts. The arm64 exception handlers do not account for this, and
it's possible that RCU is not watching while an exception handler runs.
The x86/generic entry code handles this by ensuring that all (non-NMI)
kernel exception handlers call irqentry_enter() and irqentry_exit(),
which handle RCU, lockdep, and IRQ flag tracing. We can't yet move to
the generic entry code, and already hadnle the user<->kernel transitions
elsewhere, so we add new kernel<->kernel transition helpers alog the
lines of the generic entry code.
Since we now track interrupts becoming masked when an exception is
taken, local_daif_inherit() is modified to track interrupts becoming
re-enabled when the original context is inherited. To balance the
entry/exit paths, each handler masks all DAIF exceptions before
exit_to_kernel_mode().
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-10-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
projects / kernel.git / log