FEAT_SME2 is an extension of FEAT_SME and an optional feature
from v9.2. Its an extension of SME, wherein it not only
processes matrix operations efficiently, but also provides
outer-product instructions to accelerate matrix operations.
It affords instructions for multi-vector operations.
Further, it adds an 512 bit architectural register ZT0.
This patch implements all the changes introduced with FEAT_SME2
to ensure that the instructions are allowed to access ZT0
register from Non-secure lower exception levels.
Additionally, it adds support to ensure FEAT_SME2 is aligned
with the existing FEATURE DETECTION mechanism, and documented.
Macro esb used in TF-A executes the instruction "esb" and is kept under
RAS_EXTENSION macro. RAS_EXTENSION, as it stands today, is only enabled
for platforms which wants RAS errors to be handled in Firmware while esb
instruction is available when RAS architecture feature is present
irrespective of its handling.
Currently TF-A does not have mechanism to detect whether RAS is present
or not in HW, define this macro unconditionally.
Its harmless for non-RAS cores as this instruction executes as NOP.
Merge changes from topic "ti-sci-cleanup" into integration
* changes:
feat(ti): synchronize access to secure proxy threads
refactor(ti): remove inline directive from ti_sci and sec_proxy drivers
refactor(ti): refactor ti_sci_{setup,do}_xfer to allow zero size response
feat(ti): add sub and patch version number support
build(fvp): reduce the number of cpu libraries included by default
The fvp build includes a very large number of cpus so that it can run on
a wide range of models. One config (HW_ASSISTED_COHERENCY=1
CTX_INCLUDE_AARCH32_REGS=0) includes an unusually large number of cpus.
Well, the list is quite arbitrary and incomplete. As we're currently out
of BL31 space on the fvp, remove all that are not routinely run in the
CI to buy us some time.
Also use the opportunity to reorder the list into something searchable.
Merge changes from topic "align-sections" into integration
* changes:
build(trp): sort sections by alignment by default
build(tsp): sort sections by alignment by default
build(sp-min): sort sections by alignment by default
build(bl31): sort sections by alignment by default
build(bl2u): sort sections by alignment by default
build(bl2): sort sections by alignment by default
Rohit Ner [Tue, 25 Apr 2023 07:14:41 +0000 (00:14 -0700)]
fix(ufs): poll UCRDY for all commands
Host must only set UICCMD if HCS.UCRDY is set to 1.
At present, SW polls for UCRDY only before sending DME_GET.
Generalise this behaviour for DME_SET, DME_LINKSTARTUP,
DME_HIBERNATE_EXIT by moving polling logic inside ufshc_send_uic_cmd.
Signed-off-by: Rohit Ner <rohitner@google.com>
Change-Id: Iece777f803a660fdd144a073834c221e889371a6
Harrison Mutai [Mon, 24 Apr 2023 08:58:17 +0000 (09:58 +0100)]
docs: patch Poetry build instructions
Some parts of the documentation referring to Poetry provides incorrect
build instructions and has some minor formatting errors. Reformat the
bits that require formatting, and fix the build instructions. These
were originally part of the patch stack that added Poetry support but
were accidentally reverted prior to merge.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Change-Id: I336d3a7bbe99f75262430ae436f8ebc2cb050d2c
Andre Przywara [Thu, 26 Jan 2023 16:47:52 +0000 (16:47 +0000)]
refactor(cpufeat): enable FEAT_DIT for FEAT_STATE_CHECKED
At the moment we only support FEAT_DIT to be either unconditionally
compiled in, or to be not supported at all.
Add support for runtime detection (ENABLE_DIT=2), by splitting
is_armv8_4_dit_present() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed).
We use ENABLE_DIT in two occassions in assembly code, where we just set
the DIT bit in the DIT system register.
Protect those two cases by reading the CPU ID register when ENABLE_DIT
is set to 2.
Change the FVP platform default to the now supported dynamic
option (=2), so the right decision can be made by the code at runtime.
Change-Id: I506d352f18e23c60db8cdf08edb449f60adbe098 Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Harrison Mutai [Mon, 24 Apr 2023 16:13:07 +0000 (17:13 +0100)]
fix: add missing click dependency
Click is used in parts of the CI scripts (see run_config/fvp-linux.tc
for instance), add it back as part of a new dependency group. Future
dependencies that are required only in CI should be added to the
``ci`` dependency group.
Change-Id: I5da7fea703495dd4006d86334626f126a850bb10 Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Manish Pandey [Wed, 29 Mar 2023 14:20:32 +0000 (15:20 +0100)]
fix(cpus): do not put RAS check before using esb
If RAS Extension is not implemented esb instruction executes as a NOP.
No need to have a check for RAS presence in the code.
Also, The handler is related to a synchronous exceptions which
implicitly is part of BL31 image only, so remove that check too.
Manish Pandey [Tue, 14 Mar 2023 13:44:53 +0000 (13:44 +0000)]
fix(fvp): correct ehf priority for SPM_MM
PLAT_SP_PRI is used by SPM_MM and it is assigned same value as RAS
priority. Which is not allowed by exception handling framework and
causes build failure if both SPM_MM and RAS is enabled.
To fix this problem assign SP a different priority than RAS.
Merge changes from topic "mb/trusted-boot-update" into integration
* changes:
refactor(auth)!: unify REGISTER_CRYPTO_LIB
refactor(auth): replace plat_convert_pk
docs(auth): add auth_decrypt in CM chapter
feat(auth): compare platform and certificate ROTPK for authentication
docs(auth): add 'calc_hash' function's details in CM
Our process documentation already mentions that if a platform is no
longer maintained, it is best to deprecate it to keep the project's
source tree clean and healthy.
The same argument stands for drivers or library interfaces so extend
this policy to those.
Yann Gautier [Wed, 15 Mar 2023 10:31:25 +0000 (11:31 +0100)]
refactor(auth)!: unify REGISTER_CRYPTO_LIB
Have only one definition for REGISTER_CRYPTO_LIB macro, with all the
possible fields. Worst case adds 4 u64 to crypto_lib_desc.
While at it, correct some MISRA violations:
MC3R1.R12.1: (advisory) The precedence of operators within expressions
should be made explicit.
Yann Gautier [Tue, 24 Jan 2023 08:39:47 +0000 (09:39 +0100)]
refactor(auth): replace plat_convert_pk
Following discussions in the reviews of the patch that introduced
plat_convert_pk() function [1], it was decided to deprecate it to
avoid weak function declaration.
A new optional function pointer convert_pk is added to crypto_lib_desc_t.
A new function crypto_mod_convert_pk() will either call
crypto_lib_desc.convert_pk() if it is defined, or do the same
as what was done by the weak function otherwise.
Harrison Mutai [Thu, 16 Feb 2023 10:20:48 +0000 (10:20 +0000)]
feat: add support for poetry
New python dependencies are introduced by the memory mapping script.
Rather than add another `requirements.txt` utilise poetry. This is a
proper dependency management framework for Python. The two main upsides
of using poetry instead of the traditional requirements.txt are
maintainability and reproducibility.
Poetry provides a proper lock file for pinning dependencies, similar to
npm for JavaScript. This allows for separate environments (i.e. docs,
tools) to be created efficiently, and in a reproducible manner, wherever
the project is deployed. Having dependencies pinned in this manner is a
boon as a security focused project. An additional upside is that we will
receive security updates for dependencies via GitHub's Dependabot.
Change-Id: I5a3c2003769b878a464c8feac0f789e5ecf8d56c Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
docs(threat-model): add a notes related to the Measured Boot
TF-A currently does not have any TPM2 driver for extending
measurements into a discrete TPM chip. In TPM-based attestation
scheme, measurements are just stored into a TCG-compatible event
log buffer in secure memory.
In light of the fact that Event Log measurements are taken by BL1 and
BL2, we need to trust these components to store genuine measurements,
and the Generic Threat Model always mitigates against attacks on these
components, therefore, there is no explicit document for the Measured
Boot threat model at this time is needed.
Change-Id: I41b037b2f5956d327b53cd834345e5aefdcfb5ef Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Chris Kay [Tue, 18 Apr 2023 16:32:41 +0000 (17:32 +0100)]
build(hooks): allow hooks to skip Commitizen
Adds a conditional check in the `prepare-commit-msg` commit hook that
reads the `tf-a.disableCommitizen` Git configuration option, and
does not execute Commitizen if it is found.
To skip Commitizen, run:
git config tf-a.disableCommitizen true
Change-Id: Ic8967f6f42bf3555df09b57096044fb99438d4d4 Signed-off-by: Chris Kay <chris.kay@arm.com>
feat(fvp): add Event Log maximum size property in DT
Updated the code to get and set the 'tpm_event_log_max_size' property
in the event_log.dtsi.
In this change, the maximum Event Log buffer size allocated by BL1 is
passed to BL2, rather than both relying on the maximum Event Log buffer
size macro.
Change-Id: I7aa6256390872171e362b6f166f3f7335aa6e425 Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Mark Brown [Tue, 14 Mar 2023 21:33:04 +0000 (21:33 +0000)]
feat(gcs): support guarded control stack
Arm v9.4 introduces support for Guarded Control Stack, providing
mitigations against some forms of RPO attacks and an efficient mechanism
for obtaining the current call stack without requiring a full stack
unwind. Enable access to this feature for EL2 and below, context
switching the newly added EL2 registers as appropriate.
Change the FVP platform to default to handling this as a dynamic option
so the right decision can be made by the code at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I691aa7c22e3547bb3abe98d96993baf18c5f0e7b
Chris Kay [Thu, 26 Jan 2023 18:31:52 +0000 (18:31 +0000)]
build(trp): sort sections by alignment by default
This change forces LD to sort all input sections by alignment when
allocating them within an output section. This is done in some places
explicitly in the linker scripts today, but this makes sure we don't
miss any easy targets.
Change-Id: Ife89a8bb9e592b55c761d9a3dfefc2aeeb07802f Signed-off-by: Chris Kay <chris.kay@arm.com>
Chris Kay [Thu, 26 Jan 2023 18:31:52 +0000 (18:31 +0000)]
build(tsp): sort sections by alignment by default
This change forces LD to sort all input sections by alignment when
allocating them within an output section. This is done in some places
explicitly in the linker scripts today, but this makes sure we don't
miss any easy targets.
Change-Id: Id702a2a572f2b43c77d53634ddc64b0220d2560b Signed-off-by: Chris Kay <chris.kay@arm.com>
Chris Kay [Thu, 26 Jan 2023 18:31:52 +0000 (18:31 +0000)]
build(sp-min): sort sections by alignment by default
This change forces LD to sort all input sections by alignment when
allocating them within an output section. This is done in some places
explicitly in the linker scripts today, but this makes sure we don't
miss any easy targets.
Change-Id: I33d5044e4d34a9d1187d0935ffc03d1f1177e340 Signed-off-by: Chris Kay <chris.kay@arm.com>
Chris Kay [Thu, 26 Jan 2023 18:31:52 +0000 (18:31 +0000)]
build(bl31): sort sections by alignment by default
This change forces LD to sort all input sections by alignment when
allocating them within an output section. This is done in some places
explicitly in the linker scripts today, but this makes sure we don't
miss any easy targets.
Change-Id: Iadcd38a66a7a9f4b2af3adbc0487a15091486b17 Signed-off-by: Chris Kay <chris.kay@arm.com>
Chris Kay [Thu, 26 Jan 2023 18:31:52 +0000 (18:31 +0000)]
build(bl2u): sort sections by alignment by default
This change forces LD to sort all input sections by alignment when
allocating them within an output section. This is done in some places
explicitly in the linker scripts today, but this makes sure we don't
miss any easy targets.
Change-Id: I2745327ed106295e0e0d3a54b3096514a1403c3c Signed-off-by: Chris Kay <chris.kay@arm.com>
Chris Kay [Thu, 26 Jan 2023 18:31:52 +0000 (18:31 +0000)]
build(bl2): sort sections by alignment by default
This change forces LD to sort all input sections by alignment when
allocating them within an output section. This is done in some places
explicitly in the linker scripts today, but this makes sure we don't
miss any easy targets.
Change-Id: Id70be2a5399c4c75fcf2a736cab0991d20a6b863 Signed-off-by: Chris Kay <chris.kay@arm.com>
Chris Kay [Fri, 6 Jan 2023 11:02:00 +0000 (11:02 +0000)]
build(bl1): sort sections by alignment by default
This change forces LD to sort all input sections by alignment when
allocating them within an output section. This is done in some places
explicitly in the linker scripts today, but this makes sure we don't
miss any easy targets.
Change-Id: I69d6acea822036a6365a7ea10fa732b5e0387f52 Signed-off-by: Chris Kay <chris.kay@arm.com>
Markus Niebel [Tue, 2 Mar 2021 17:44:25 +0000 (18:44 +0100)]
feat(imx8): add support for debug uart on lpuart1
Needed for TQMa8Xx on MBa8Xx. With this changes it is
possible to build:
$ make PLAT=imx8qx IMX_DEBUG_UART=1 DEBUG_CONSOLE=1 bl31
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Change-Id: If380845b254f30fe919ebb33c86130597c4b8ad3
Michal Simek [Mon, 17 Apr 2023 11:51:59 +0000 (13:51 +0200)]
fix(zynqmp): remove unused PLAT_NUM_POWER_DOMAINS
Remove unused PLAT_NUM_POWER_DOMAINS macro. Macro is referenced by
docs/design/psci-pd-tree.rst but it is not used in any calculation
that's why it is better to remove it.
Change-Id: I33f26cda6a4404061af5598ea4c751f64127e50a Signed-off-by: Michal Simek <michal.simek@amd.com>
Michal Simek [Mon, 17 Apr 2023 11:15:23 +0000 (13:15 +0200)]
fix(xilinx): remove asserts around arg0/arg1
The commit a6f340fe58b9 ("Introduce the new BL handover interface")
extended handoff to 4 registers instead of 2. Arguments arg0-3 are
not used by platform code but in future they can be used for it.
But it doesn't make sense to checking their unused value.
Change-Id: I151e4b1574465409424453c054d937487086b79a Signed-off-by: Michal Simek <michal.simek@amd.com>
Michal Simek [Fri, 14 Apr 2023 06:43:51 +0000 (08:43 +0200)]
style(xilinx): replace ARM by Arm in copyrights
The commit 6bb49c876c75 ("style(hooks): adds Arm copyright style fix")
is enforcing proper case for ARM. That's why fix it in plat/xilinx to
make sure that pre-commit.copyright won't be touching platform specific
files.
Change-Id: I49c66e18d46ed871a6aa128c9b2a403d0cf83416 Signed-off-by: Michal Simek <michal.simek@amd.com>
fix(intel): fix Agilex and N5X clock manager to main PLL C0
Update Agilex and N5X clock manager to get MPU clock from mainPLL C0
and PeriPLLC0.
1. Updated macro name PLAT_SYS_COUNTER_CONVERT_TO_MHZ to
PLAT_HZ_CONVERT_TO_MHZ.
2. Updated get_cpu_clk to point to get_mpu_clk and added comment.
3. Added get_mpu_clk to get clock from main PLL C0 and Peri PLL C0.
Rob Newberry [Thu, 30 Mar 2023 17:43:21 +0000 (10:43 -0700)]
fix(rpi3): initialize SD card host controller
Add initial configuration parameters for Rasperry Pi 3's sdhost
controller, and then configure and use those parameters.
This change allows warm reboots of UEFI on Raspberry Pi 3B+ where
existing code often fails with "unknown error". See discussion at:
https://github.com/pftf/RPi3/issues/24
The basic idea is that some initial configuration parameters
(clock rate, bus width) aren't configured into the hardware before
commands start being sent. I suspect that the particular setting
that matters is the "slow card" bit, but the initial clock setting
also seemed wrong to me.
Change-Id: I526def340def143f23f3422f1fc14c12c937ca7f Signed-off-by: Rob Newberry <robthedude@mac.com>
Juan Pablo Conde [Wed, 22 Feb 2023 16:09:52 +0000 (10:09 -0600)]
feat(hcx): initialize HCRX_EL2 to its default value
The value of register HCRX_EL2 is UNKNOWN out of reset. This can
affect the behavior in lower exception levels, such as traps to
EL2 due to a wrong configuration of the register upon reset.
This patch initializes the register at EL3 and disables all traps
related to it.
On the other hand, new fields have been introduced for HCRX_EL2,
which are now defined in this patch, so they can be used in
further development.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I0bf1e949aa0d3be9f227358ad088a1ecb96ce222
Mark Brown [Tue, 14 Mar 2023 20:48:43 +0000 (20:48 +0000)]
feat(pie/por): support permission indirection and overlay
Arm v8.9 introduces a series of features providing a new way to set memory
permissions. Instead of directly encoding the permissions in the page
tables the PTEs contain indexes into an array of permissions stored in
system registers, allowing greater flexibility and density of encoding.
Enable access to these features for EL2 and below, context switching the
newly added EL2 registers as appropriate. Since all of FEAT_S[12]P[IO]E
are separately discoverable we have separate build time options for
enabling them, but note that there is overlap in the registers that they
implement and the enable bit required for lower EL access.
Change the FVP platform to default to handling them as dynamic options so
the right decision can be made by the code at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: Icf89e444e39e1af768739668b505661df18fb234
Fix coverity finding in psci_cpu_on, in which target_idx is directly
assigned the return value from plat_core_pos_by_mpidr. If the latter
returns a negative or large positive value, it can trigger an out of
bounds overflow for the psci_cpu_pd_nodes array.
>>>> CID 382009: (OVERRUN)
>>>> Overrunning callee's array of size 8 by passing argument "target_idx" (which evaluates to 4294967295) in call to "psci_spin_lock_cpu".
> 80 psci_spin_lock_cpu(target_idx);
>>>> CID 382009: (OVERRUN)
>>>> Overrunning callee's array of size 8 by passing argument "target_idx" (which evaluates to 4294967295) in call to "psci_spin_unlock_cpu".
> 160 psci_spin_unlock_cpu(target_idx);
If PLATFORM_STACK_SIZE not already defined, use the default value of
PLATFORM_STACK_SIZE.
This makes the stack size value configurable for different interface
like custom packages.
Signed-off-by: Amit Nagal <amit.nagal@amd.com> Signed-off-by: Akshay Belsare <akshay.belsare@amd.com>
Change-Id: I87e9fcbfb4c4092378b1ac0ff8fb6d084495d320
docs(porting): refer the reader back to the threat model
When porting TF-A to a new platform, it is essential to read the
threat model documents in conjunction with the porting guide to
understand the security responsibilities of each platform interface
to implement.
Add a note to highlight this in the porting guide.
projects / arm-tf.git / log