Global `-Warray-bounds` enablement revealed some problems, one of
which is the way we define and use AQC rules messages.
In fact, they have a shared header, followed by the actual message,
which can be of one of several different formats. So it is
straightforward enough to define that header as a separate struct
and then embed it into message structures as needed, but currently
all the formats reside in one union coupled with the header. Then,
the code allocates only the memory needed for a particular message
format, leaving the union potentially incomplete.
There are no actual reads or writes beyond the end of an allocated
chunk, but at the same time, the whole implementation is fragile and
backed by an equilibrium rather than strong type and memory checks.
Define the structures the other way around: one for the common
header and the rest for the actual formats with the header embedded.
There are no places where several union members would be used at the
same time anyway. This allows to use proper struct_size() and let
the compiler know what is going to be done.
Finally, unsilence `-Warray-bounds` back for ice_switch.c.
Other little things worth mentioning:
* &ice_sw_rule_vsi_list_query is not used anywhere, remove it. It's
weird anyway to talk to hardware with purely kernel types
(bitmaps);
* expand the ICE_SW_RULE_*_SIZE() macros to pass a structure
variable name to struct_size() to let it do strict typechecking;
* rename ice_sw_rule_lkup_rx_tx::hdr to ::hdr_data to keep ::hdr
for the header structure to have the same name for it constistenly
everywhere;
* drop the duplicate of %ICE_SW_RULE_RX_TX_NO_HDR_SIZE residing in
ice_switch.h.
Fixes: 54df256cb16c ("ice: Add support for switch filter programming") Fixes: 0083c4b46939 ("ice: replace single-element array used for C struct hack") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220601105924.2841410-1-alexandr.lobakin@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fei Qin [Wed, 1 Jun 2022 08:34:49 +0000 (10:34 +0200)]
nfp: remove padding in nfp_nfdk_tx_desc
NFDK firmware supports 48-bit dma addressing and
parses 16 high bits of dma addresses.
In nfp_nfdk_tx_desc, dma related structure and tso
related structure are union. When "mss" be filled
with nonzero value due to enable tso, the memory used
by "padding" may be also filled. Then, firmware may
parse wrong dma addresses which causes TX watchdog
timeout problem.
This patch removes padding and unifies the dma_addr_hi
bits with the one in firmware. nfp_nfdk_tx_desc_set_dma_addr
is also added to match this change.
Fixes: 1cccc56ca776 ("nfp: add support for NFDK data path") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220601083449.50556-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Duoming Zhou [Mon, 30 May 2022 15:21:58 +0000 (23:21 +0800)]
ax25: Fix ax25 session cleanup problems
There are session cleanup problems in ax25_release() and
ax25_disconnect(). If we setup a session and then disconnect,
the disconnected session is still in "LISTENING" state that
is shown below.
Active AX.25 sockets
Dest Source Device State Vr/Vs Send-Q Recv-Q
DL9SAU-4 DL9SAU-3 ??? LISTENING 000/000 0 0
DL9SAU-3 DL9SAU-4 ??? LISTENING 000/000 0 0
The first reason is caused by del_timer_sync() in ax25_release().
The timers of ax25 are used for correct session cleanup. If we use
ax25_release() to close ax25 sessions and ax25_dev is not null,
the del_timer_sync() functions in ax25_release() will execute.
As a result, the sessions could not be cleaned up correctly,
because the timers have stopped.
In order to solve this problem, this patch adds a device_up flag
in ax25_dev in order to judge whether the device is up. If there
are sessions to be cleaned up, the del_timer_sync() in
ax25_release() will not execute. What's more, we add ax25_cb_del()
in ax25_kill_by_device(), because the timers have been stopped
and there are no functions that could delete ax25_cb if we do not
call ax25_release(). Finally, we reorder the position of
ax25_list_lock in ax25_cb_del() in order to synchronize among
different functions that call ax25_cb_del().
The second reason is caused by improper check in ax25_disconnect().
The incoming ax25 sessions which ax25->sk is null will close
heartbeat timer, because the check "if(!ax25->sk || ..)" is
satisfied. As a result, the session could not be cleaned up properly.
In order to solve this problem, this patch changes the improper
check to "if(ax25->sk && ..)" in ax25_disconnect().
What`s more, the ax25_disconnect() may be called twice, which is
not necessary. For example, ax25_kill_by_device() calls
ax25_disconnect() and sets ax25->state to AX25_STATE_0, but
ax25_release() calls ax25_disconnect() again.
In order to solve this problem, this patch add a check in
ax25_release(). If the flag of ax25->sk equals to SOCK_DEAD,
the ax25_disconnect() in ax25_release() should not be executed.
Fixes: e0a2e3a49bf2 ("ax25: Fix UAF bugs in ax25 timers") Fixes: 48a7d55e7d31 ("ax25: Fix segfault after sock connection timeout") Reported-and-tested-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220530152158.108619-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Slark Xiao [Wed, 1 Jun 2022 04:05:31 +0000 (12:05 +0800)]
net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline
Adding support for Cinterion device MV31 with Qualcomm
new baseline. Use different PIDs to separate it from
previous base line products.
All interfaces settings keep same as previous.
Jakub Kicinski [Thu, 2 Jun 2022 01:04:40 +0000 (18:04 -0700)]
Merge tag 'mlx5-fixes-2022-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-05-31
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
* tag 'mlx5-fixes-2022-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix mlx5_get_next_dev() peer device matching
net/mlx5e: Update netdev features after changing XDP state
net/mlx5: correct ECE offset in query qp output
net/mlx5e: Disable softirq in mlx5e_activate_rq to avoid race condition
net/mlx5: CT: Fix header-rewrite re-use for tupels
net/mlx5e: TC NIC mode, fix tc chains miss table
net/mlx5: Don't use already freed action pointer
====================
====================
sfc/siena: fix some efx_separate_tx_channels errors
Trying to load sfc driver with modparam efx_separate_tx_channels=1
resulted in errors during initialization and not being able to use the
NIC. This patches fix a few bugs and make it work again.
This has been already done for sfc, do it also for sfc_siena.
====================
Íñigo Huguet [Wed, 1 Jun 2022 06:36:03 +0000 (08:36 +0200)]
sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels
tx_channel_offset is calculated in efx_allocate_msix_channels, but it is
also calculated again in efx_set_channels because it was originally done
there, and when efx_allocate_msix_channels was introduced it was
forgotten to be removed from efx_set_channels.
Moreover, the old calculation is wrong when using
efx_separate_tx_channels because now we can have XDP channels after the
TX channels, so n_channels - n_tx_channels doesn't point to the first TX
channel.
Remove the old calculation from efx_set_channels, and add the
initialization of this variable if MSI or legacy interrupts are used,
next to the initialization of the rest of the related variables, where
it was missing.
This has been already done for sfc, do it also for sfc_siena.
Fixes: dc1c0a923867 ("sfc: allocate channels for XDP tx queues") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Habets [Wed, 1 Jun 2022 06:36:02 +0000 (08:36 +0200)]
sfc/siena: fix considering that all channels have TX queues
Normally, all channels have RX and TX queues, but this is not true if
modparam efx_separate_tx_channels=1 is used. In that cases, some
channels only have RX queues and others only TX queues (or more
preciselly, they have them allocated, but not initialized).
Fix efx_channel_has_tx_queues to return the correct value for this case
too.
This has been already done for sfc, do it also for sfc_siena.
Messages shown at probe time before the fix:
sfc 0000:03:00.0 ens6f0np0: MC command 0x82 inlen 544 failed rc=-22 (raw=0) arg=0
------------[ cut here ]------------
netdevice: ens6f0np0: failed to initialise TXQ -1
WARNING: CPU: 1 PID: 626 at drivers/net/ethernet/sfc/ef10.c:2393 efx_ef10_tx_init+0x201/0x300 [sfc]
[...] stripped
RIP: 0010:efx_ef10_tx_init+0x201/0x300 [sfc]
[...] stripped
Call Trace:
efx_init_tx_queue+0xaa/0xf0 [sfc]
efx_start_channels+0x49/0x120 [sfc]
efx_start_all+0x1f8/0x430 [sfc]
efx_net_open+0x5a/0xe0 [sfc]
__dev_open+0xd0/0x190
__dev_change_flags+0x1b3/0x220
dev_change_flags+0x21/0x60
[...] stripped
Messages shown at remove time before the fix:
sfc 0000:03:00.0 ens6f0np0: failed to flush 10 queues
sfc 0000:03:00.0 ens6f0np0: failed to flush queues
Fixes: 45f4fb4ba4be ("sfc: fix channel allocation with brute force") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Tested-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 2 Jun 2022 00:44:03 +0000 (17:44 -0700)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
ipsec 2022-06-01
1) Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
From Michal Kubecek.
2) Don't set IPv4 DF bit when encapsulating IPv6 frames below 1280 bytes.
From Maciej Żenczykowski.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: do not set IPv4 DF flag when encapsulating IPv6 frames <= 1280 bytes.
Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
====================
Jakub Kicinski [Thu, 2 Jun 2022 00:34:22 +0000 (17:34 -0700)]
Merge tag 'wireless-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.19
First set of fixes for v5.19. Build fixes for iwlwifi and libertas, a
scheduling while atomic fix for rtw88 and use-after-free fix for
mac80211.
* tag 'wireless-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix use-after-free in chanctx code
wifi: rtw88: add a work to correct atomic scheduling warning of ::set_tim
wifi: iwlwifi: pcie: rename CAUSE macro
wifi: libertas: use variable-size data in assoc req/resp cmd
====================
Dan Carpenter [Tue, 31 May 2022 12:10:05 +0000 (15:10 +0300)]
net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6()
The tcf_ct_flow_table_fill_tuple_ipv6() function is supposed to return
false on failure. It should not return negatives because that means
succes/true.
Fixes: 698eeb0f5ca4 ("act_ct: Support GRE offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Link: https://lore.kernel.org/r/YpYFnbDxFl6tQ3Bn@kili Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Aya Levin [Tue, 31 May 2022 08:45:44 +0000 (11:45 +0300)]
net: ping6: Fix ping -6 with interface name
When passing interface parameter to ping -6:
$ ping -6 ::11:141:84:9 -I eth2
Results in:
PING ::11:141:84:10(::11:141:84:10) from ::11:141:84:9 eth2: 56 data bytes
ping: sendmsg: Invalid argument
ping: sendmsg: Invalid argument
Initialize the fl6's outgoing interface (OIF) before triggering
ip6_datagram_send_ctl. Don't wipe fl6 after ip6_datagram_send_ctl() as
changes in fl6 that may happen in the function are overwritten explicitly.
Update comment accordingly.
Fixes: 94a2073fbf88 ("net: ping6: support setting basic SOL_IPV6 options via cmsg") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220531084544.15126-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ziyang Xuan [Tue, 31 May 2022 07:45:00 +0000 (15:45 +0800)]
macsec: fix UAF bug for real_dev
Create a new macsec device but not get reference to real_dev. That can
not ensure that real_dev is freed after macsec. That will trigger the
UAF bug for real_dev as following:
After commit 9c0e24941de2 ("net: allow out-of-order netdev unregistration")
and commit 40a5699f43df ("ipv6: give an IPv6 dev to blackhole_netdev"), we
can add dev_hold_track() in macsec_dev_init() and dev_put_track() in
macsec_free_netdev() to fix the problem.
Fixes: 198dc622240d ("macsec: fix refcnt leak in module exit routine") Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Johannes Berg [Wed, 1 Jun 2022 07:19:36 +0000 (09:19 +0200)]
wifi: mac80211: fix use-after-free in chanctx code
In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE, we free the old context
in ieee80211_vif_use_reserved_reassign(). Therefore, we
cannot check the old_ctx anymore, so we should set it to
NULL after this point.
However, since the new_ctx replace state is clearly not
IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do
anything else in this function and can just return to
avoid accessing the freed old_ctx.
Hangbin Liu [Tue, 31 May 2022 06:37:27 +0000 (14:37 +0800)]
bonding: guard ns_targets by CONFIG_IPV6
Guard ns_targets in struct bond_params by CONFIG_IPV6, which could save
256 bytes if IPv6 not configed. Also add this protection for function
bond_is_ip6_target_ok() and bond_get_targets_ip6().
Remove the IS_ENABLED() check for bond_opts[] as this will make
BOND_OPT_NS_TARGETS uninitialized if CONFIG_IPV6 not enabled. Add
a dummy bond_option_ns_ip6_targets_set() for this situation.
Fixes: 5bd50b2a0a38 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/20220531063727.224043-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet [Mon, 30 May 2022 21:37:13 +0000 (14:37 -0700)]
tcp: tcp_rtx_synack() can be called from process context
Laurent reported the enclosed report [1]
This bug triggers with following coditions:
0) Kernel built with CONFIG_DEBUG_PREEMPT=y
1) A new passive FastOpen TCP socket is created.
This FO socket waits for an ACK coming from client to be a complete
ESTABLISHED one.
2) A socket operation on this socket goes through lock_sock()
release_sock() dance.
3) While the socket is owned by the user in step 2),
a retransmit of the SYN is received and stored in socket backlog.
4) At release_sock() time, the socket backlog is processed while
in process context.
5) A SYNACK packet is cooked in response of the SYN retransmit.
6) -> tcp_rtx_synack() is called in process context.
Before blamed commit, tcp_rtx_synack() was always called from BH handler,
from a timer handler.
Fix this by using TCP_INC_STATS() & NET_INC_STATS()
which do not assume caller is in non preemptible context.
Fixes: 56ea9b938e8e ("tcp: TCP Fast Open Server - main code path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch> Acked-by: Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20220530213713.601888-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guoju Fang [Sat, 28 May 2022 10:16:28 +0000 (18:16 +0800)]
net: sched: add barrier to fix packet stuck problem for lockless qdisc
In qdisc_run_end(), the spin_unlock() only has store-release semantic,
which guarantees all earlier memory access are visible before it. But
the subsequent test_bit() has no barrier semantics so may be reordered
ahead of the spin_unlock(). The store-load reordering may cause a packet
stuck problem.
The concurrent operations can be described as below,
CPU 0 | CPU 1
qdisc_run_end() | qdisc_run_begin()
. | .
----> /* may be reorderd here */ | .
| . | .
| spin_unlock() | set_bit()
| . | smp_mb__after_atomic()
---- test_bit() | spin_trylock()
. | .
Consider the following sequence of events:
CPU 0 reorder test_bit() ahead and see MISSED = 0
CPU 1 calls set_bit()
CPU 1 calls spin_trylock() and return fail
CPU 0 executes spin_unlock()
At the end of the sequence, CPU 0 calls spin_unlock() and does nothing
because it see MISSED = 0. The skb on CPU 1 has beed enqueued but no one
take it, until the next cpu pushing to the qdisc (if ever ...) will
notice and dequeue it.
This patch fix this by adding one explicit barrier. As spin_unlock() and
test_bit() ordering is a store-load ordering, a full memory barrier
smp_mb() is needed here.
wenxu [Thu, 26 May 2022 01:25:46 +0000 (21:25 -0400)]
netfilter: flowtable: fix nft_flow_route source address for nat case
For snat and dnat cases, the saddr should be taken from reverse tuple.
Fixes: fb0f8e678cd4 (netfilter: flowtable: nft_flow_route use more data for reverse route) Signed-off-by: wenxu <wenxu@chinatelecom.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
wenxu [Thu, 26 May 2022 01:25:45 +0000 (21:25 -0400)]
netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
The nf_flow_table gets route through ip_route_output_key. If the saddr
is not local one, then FLOWI_FLAG_ANYSRC flag should be set. Without
this flag, the route lookup for other_dst will fail.
Fixes: fb0f8e678cd4 (netfilter: flowtable: nft_flow_route use more data for reverse route) Signed-off-by: wenxu <wenxu@chinatelecom.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_tables: double hook unregistration in netns path
__nft_release_hooks() is called from pre_netns exit path which
unregisters the hooks, then the NETDEV_UNREGISTER event is triggered
which unregisters the hooks again.
Unregister and destroy netdev hook from netns pre_exit via kfree_rcu
so the NETDEV_UNREGISTER path see unregistered hooks.
Fixes: 815fac68e781 ("netfilter: nftables: fix possible UAF over chains from packet path in netns") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_tables: hold mutex on netns pre_exit path
clean_net() runs in workqueue while walking over the lists, grab mutex.
Fixes: 815fac68e781 ("netfilter: nftables: fix possible UAF over chains from packet path in netns") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add several sanity checks for nft_set_desc_concat_parse():
- validate desc->field_count not larger than desc->field_len array.
- field length cannot be larger than desc->field_len (ie. U8_MAX)
- total length of the concatenation cannot be larger than register array.
Joint work with Florian Westphal.
Fixes: c1894f2477ec ("netfilter: nf_tables: Support for sets with multiple ranged fields") Reported-by: <zhangziming.zzm@antgroup.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In some use-cases, mlx5 instances will need to search for their peer
device (the other port on the same HCA). For that, mlx5 device matching
mechanism relied on auxiliary_find_device() to search, and used a bad matching
callback function.
This approach has two issues:
1) next_phys_dev() the matching function, assumed all devices are
of the type mlx5_adev (mlx5 auxiliary device) which is wrong and
could lead to crashes, this worked for a while, since only lately
other drivers started registering auxiliary devices.
2) using the auxiliary class bus (auxiliary_find_device) to search for
mlx5_core_dev devices, who are actually PCIe device instances, is wrong.
This works since mlx5_core always has at least one mlx5_adev instance
hanging around in the aux bus.
As suggested by others we can fix 1. by comparing device names prefixes
if they have the string "mlx5_core" in them, which is not a best practice !
but even with that fixed, still 2. needs fixing, we are trying to
match pcie device peers so we should look in the right bus (pci bus),
hence this fix.
The fix:
1) search the pci bus for mlx5 peer devices, instead of the aux bus
2) to validated devices are the same type "mlx5_core_dev" compare if
they have the same driver, which is bulletproof.
This wouldn't have worked with the aux bus since the various mlx5 aux
device types don't share the same driver, even if they share the same device
wrapper struct (mlx5_adev) "which helped to find the parent device"
Fixes: 050ae1c0b195 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Reported-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reported-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
net/mlx5e: Update netdev features after changing XDP state
Some features (LRO, HW GRO) conflict with XDP. If there is an attempt to
enable such features while XDP is active, they will be set to `off
[requested on]`. In order to activate these features after XDP is turned
off, the driver needs to call netdev_update_features(). This commit adds
this missing call after XDP state changes.
Fixes: dd58ae3c5a64 ("net/mlx5e: Properly block LRO when XDP is enabled") Fixes: 23cea8f61fb4 ("net/mlx5e: Properly block HW GRO when XDP is enabled") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
net/mlx5e: Disable softirq in mlx5e_activate_rq to avoid race condition
When the driver activates the channels, it assumes NAPI isn't running
yet. mlx5e_activate_rq posts a NOP WQE to ICOSQ to trigger a hardware
interrupt and start NAPI, which will run mlx5e_alloc_rx_mpwqe and post
UMR WQEs to ICOSQ to be able to receive packets with striding RQ.
Unfortunately, a race condition is possible if NAPI is triggered by
something else (for example, TX) at a bad timing, before
mlx5e_activate_rq finishes. In this case, mlx5e_alloc_rx_mpwqe may post
UMR WQEs to ICOSQ, and with the bad timing, the wqe_info of the first
UMR may be overwritten by the wqe_info of the NOP posted by
mlx5e_activate_rq.
The consequence is that icosq->db.wqe_info[0].num_wqebbs will be changed
from MLX5E_UMR_WQEBBS to 1, disrupting the integrity of the array-based
linked list in wqe_info[]. mlx5e_poll_ico_cq will hang in an infinite
loop after processing wqe_info[0], because after the corruption, the
next item to be processed will be wqe_info[1], which is filled with
zeros, and `sqcc += wi->num_wqebbs` will never move further.
This commit fixes this race condition by using async_icosq to post the
NOP and trigger the interrupt. async_icosq is always protected with a
spinlock, eliminating the race condition.
Fixes: 2cda7f9675b3 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reported-by: Karsten Nielsen <karsten@foo-bar.dk> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Paul Blakey [Mon, 23 May 2022 16:12:21 +0000 (19:12 +0300)]
net/mlx5: CT: Fix header-rewrite re-use for tupels
Tuple entries that don't have nat configured for them
which are added to the ct nat table will always create
a new modify header, as we don't check for possible
re-use on them. The same for tuples that have nat configured
for them but are added to ct table.
Fix the above by only avoiding wasteful re-use lookup
for actually natted entries in ct nat table.
Maor Dickman [Mon, 2 May 2022 07:51:30 +0000 (10:51 +0300)]
net/mlx5e: TC NIC mode, fix tc chains miss table
The cited commit changed promisc table to be created on demand with the
highest priority in the NIC table replacing the vlan table, this caused
tc NIC tables miss flow to skip the prmoisc table because it use vlan
table as miss table.
OVS offload in NIC mode use promisc by default so any unicast packet
which will be handled by tc NIC tables miss flow will skip the promisc
rule and will be dropped.
Fix this by adding new empty table in new tc level with low priority and
point the nic tc chain miss to it, the new table is managed so it will
point to vlan table if promisc is disabled and to promisc table if enabled.
Arun Ajith S [Mon, 30 May 2022 10:14:14 +0000 (10:14 +0000)]
net/ipv6: Expand and rename accept_unsolicited_na to accept_untracked_na
RFC 9131 changes default behaviour of handling RX of NA messages when the
corresponding entry is absent in the neighbour cache. The current
implementation is limited to accept just unsolicited NAs. However, the
RFC is more generic where it also accepts solicited NAs. Both types
should result in adding a STALE entry for this case.
Expand accept_untracked_na behaviour to also accept solicited NAs to
be compliant with the RFC and rename the sysctl knob to
accept_untracked_na.
Fixes: 920b5ae91a69 ("net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131") Signed-off-by: Arun Ajith S <aajith@arista.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220530101414.65439-1-aajith@arista.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Viorel Suman [Fri, 27 May 2022 08:49:34 +0000 (11:49 +0300)]
net: phy: at803x: disable WOL at probe
Before 1fad4e64c9378 ("net: phy: at803x: improve the WOL feature") patch
"at803x_get_wol" implementation used AT803X_INTR_ENABLE_WOL value to set
WAKE_MAGIC flag, and now AT803X_WOL_EN value is used for the same purpose.
The problem here is that the values of these two bits are different after
hardware reset: AT803X_INTR_ENABLE_WOL=0 after hardware reset, but
AT803X_WOL_EN=1. So now, if called right after boot, "at803x_get_wol" will
set WAKE_MAGIC flag, even if WOL function is not enabled by calling
"at803x_set_wol" function. The patch disables WOL function on probe thus
the behavior is consistent.
huhai [Thu, 26 May 2022 10:12:13 +0000 (18:12 +0800)]
net: ipv4: Avoid bounds check warning
Fix the following build warning when CONFIG_IPV6 is not set:
In function ‘fortify_memcpy_chk’,
inlined from ‘tcp_md5_do_add’ at net/ipv4/tcp_ipv4.c:1210:2:
./include/linux/fortify-string.h:328:4: error: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
328 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ping-Ke Shih [Thu, 26 May 2022 05:12:51 +0000 (13:12 +0800)]
wifi: rtw88: add a work to correct atomic scheduling warning of ::set_tim
The set_tim is supposed to be atomic, but we should download beacon
context to firmware with a mutex lock. To avoid warning, do the thing in
another work.
Since we size the command and response buffer per our needs
and not per the firmware maximum, change to a variable size
data array and put the 512 only into a comment.
In the end, that's actually what the code always wanted, and
it simplifies the code that used to subtract the fixed size
buffer size in two places.
David S. Miller [Sun, 29 May 2022 11:12:53 +0000 (12:12 +0100)]
Merge branch 'sfc-fixes'
Íñigo Huguet says:
====================
sfc: fix some efx_separate_tx_channels errors
Trying to load sfc driver with modparam efx_separate_tx_channels=1
resulted in errors during initialization and not being able to use the
NIC. This patches fix a few bugs and make it work again.
v2:
* added Martin's patch instead of a previous mine. Mine one solved some
of the initialization errors, but Martin's solves them also in all
possible cases.
* removed whitespaces cleanup, as requested by Jakub
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Íñigo Huguet [Fri, 27 May 2022 08:05:29 +0000 (10:05 +0200)]
sfc: fix wrong tx channel offset with efx_separate_tx_channels
tx_channel_offset is calculated in efx_allocate_msix_channels, but it is
also calculated again in efx_set_channels because it was originally done
there, and when efx_allocate_msix_channels was introduced it was
forgotten to be removed from efx_set_channels.
Moreover, the old calculation is wrong when using
efx_separate_tx_channels because now we can have XDP channels after the
TX channels, so n_channels - n_tx_channels doesn't point to the first TX
channel.
Remove the old calculation from efx_set_channels, and add the
initialization of this variable if MSI or legacy interrupts are used,
next to the initialization of the rest of the related variables, where
it was missing.
Fixes: dc1c0a923867 ("sfc: allocate channels for XDP tx queues") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets [Fri, 27 May 2022 08:05:28 +0000 (10:05 +0200)]
sfc: fix considering that all channels have TX queues
Normally, all channels have RX and TX queues, but this is not true if
modparam efx_separate_tx_channels=1 is used. In that cases, some
channels only have RX queues and others only TX queues (or more
preciselly, they have them allocated, but not initialized).
Fix efx_channel_has_tx_queues to return the correct value for this case
too.
Messages shown at probe time before the fix:
sfc 0000:03:00.0 ens6f0np0: MC command 0x82 inlen 544 failed rc=-22 (raw=0) arg=0
------------[ cut here ]------------
netdevice: ens6f0np0: failed to initialise TXQ -1
WARNING: CPU: 1 PID: 626 at drivers/net/ethernet/sfc/ef10.c:2393 efx_ef10_tx_init+0x201/0x300 [sfc]
[...] stripped
RIP: 0010:efx_ef10_tx_init+0x201/0x300 [sfc]
[...] stripped
Call Trace:
efx_init_tx_queue+0xaa/0xf0 [sfc]
efx_start_channels+0x49/0x120 [sfc]
efx_start_all+0x1f8/0x430 [sfc]
efx_net_open+0x5a/0xe0 [sfc]
__dev_open+0xd0/0x190
__dev_change_flags+0x1b3/0x220
dev_change_flags+0x21/0x60
[...] stripped
Messages shown at remove time before the fix:
sfc 0000:03:00.0 ens6f0np0: failed to flush 10 queues
sfc 0000:03:00.0 ens6f0np0: failed to flush queues
Fixes: 45f4fb4ba4be ("sfc: fix channel allocation with brute force") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Tested-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: enetc: Use pci_release_region() to release some resources
Some resources are allocated using pci_request_region().
It is more straightforward to release them with pci_release_region().
Fixes: 436351e93c36 ("enetc: Add mdio bus driver for the PCIe MDIO endpoint") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 27 May 2022 06:44:39 +0000 (14:44 +0800)]
bonding: NS target should accept link local address
When setting bond NS target, we use bond_is_ip6_target_ok() to check
if the address valid. The link local address was wrongly rejected in
bond_changelink(), as most time the user just set the ARP/NS target to
gateway, while the IPv6 gateway is always a link local address when user
set up interface via SLAAC.
So remove the link local addr check when setting bond NS target.
Fixes: 6d07932dd659 ("bonding: add new option ns_ip6_target") Reported-by: Li Liang <liali@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yu Xiao [Fri, 27 May 2022 18:24:24 +0000 (20:24 +0200)]
nfp: only report pause frame configuration for physical device
Only report pause frame configuration for physical device. Logical
port of both PCI PF and PCI VF do not support it.
Fixes: 6347f10e42e4 ("nfp: update ethtool reporting of pauseframe control") Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Anderson [Fri, 27 May 2022 20:37:47 +0000 (16:37 -0400)]
net: dpaa: Convert to SPDX identifiers
This converts these files to use SPDX idenfifiers instead of license
text.
Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 5eb6c2893ed1 ("[TCP]: MTU probing") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Sat, 28 May 2022 06:54:57 +0000 (14:54 +0800)]
net/smc: fixes for converting from "struct smc_cdc_tx_pend **" to "struct smc_wr_tx_pend_priv *"
"struct smc_cdc_tx_pend **" can not directly convert
to "struct smc_wr_tx_pend_priv *".
Fixes: 250b5b9e3a9d ("net/smc: put slot when connection is killed") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 28 May 2022 01:29:53 +0000 (18:29 -0700)]
Merge branch 'net-ipa-fix-page-free-in-two-spots'
Alex Elder says:
====================
net: ipa: fix page free in two spots
When a receive buffer is not wrapped in an SKB and passed to the
network stack, the (compound) page gets freed within the IPA driver.
This is currently quite rare.
The pages are freed using __free_pages(), but they should instead be
freed using page_put(). This series fixes this, in two spots.
These patches work for the current linus/master branch, but won't
apply cleanly to earlier stable branches. (Nevertheless, the fix is
a trivial substitution everwhere __free_pages() is called.)
====================
Alex Elder [Thu, 26 May 2022 15:23:14 +0000 (10:23 -0500)]
net: ipa: fix page free in ipa_endpoint_replenish_one()
Currently the (possibly compound) pages used for receive buffers are
freed using __free_pages(). But according to this comment above the
definition of that function, that's wrong:
If you want to use the page's reference count to decide
when to free the allocation, you should allocate a compound
page, and use put_page() instead of __free_pages().
Convert the call to __free_pages() in ipa_endpoint_replenish_one()
to use put_page() instead.
Fixes: 7db6548cd0dad ("net: ipa: allocate transaction in replenish loop") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 26 May 2022 15:23:13 +0000 (10:23 -0500)]
net: ipa: fix page free in ipa_endpoint_trans_release()
Currently the (possibly compound) page used for receive buffers are
freed using __free_pages(). But according to this comment above the
definition of that function, that's wrong:
If you want to use the page's reference count to decide when
to free the allocation, you should allocate a compound page,
and use put_page() instead of __free_pages().
Convert the call to __free_pages() in ipa_endpoint_trans_release()
to use put_page() instead.
Fixes: dba332f083142 ("net: ipa: define per-endpoint receive buffer size") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Menglong Dong [Tue, 24 May 2022 02:12:27 +0000 (10:12 +0800)]
bpf: Fix probe read error in ___bpf_prog_run()
I think there is something wrong with BPF_PROBE_MEM in ___bpf_prog_run()
in big-endian machine. Let's make a test and see what will happen if we
want to load a 'u16' with BPF_PROBE_MEM.
Let's make the src value '0x0001', the value of dest register will become
0x0001000000000000, as the value will be loaded to the first 2 byte of
DST with following code:
The code of the test case is simply, it will load sk->sk_family to the
register with BPF_PROBE_MEM and check if it is AF_INET6. With this patch,
now the test case 'bpf_iter' can pass:
$10 bpf_iter:OK
Fixes: 39f6a120e988 ("bpf: Add support for BTF pointers to interpreter") Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/bpf/20220524021228.533216-1-imagedong@tencent.com
Song Liu [Thu, 26 May 2022 19:16:08 +0000 (12:16 -0700)]
selftests/bpf: fix stacktrace_build_id with missing kprobe/urandom_read
Kernel function urandom_read is replaced with urandom_read_iter.
Therefore, kprobe on urandom_read is not working any more:
[root@eth50-1 bpf]# ./test_progs -n 161
test_stacktrace_build_id:PASS:skel_open_and_load 0 nsec
libbpf: kprobe perf_event_open() failed: No such file or directory
libbpf: prog 'oncpu': failed to create kprobe 'urandom_read+0x0' \
perf event: No such file or directory
libbpf: prog 'oncpu': failed to auto-attach: -2
test_stacktrace_build_id:FAIL:attach_tp err -2
161 stacktrace_build_id:FAIL
Fix this by replacing urandom_read with urandom_read_iter in the test.
Fixes: cfb417ca17ef ("random: convert to using fops->read_iter()") Reported-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Song Liu <song@kernel.org> Acked-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20220526191608.2364049-1-song@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
No reproducer so far. Looking at recent changes in this area
its clear that the free_head must not be at the end of the
structure because nf_ct_timeout structure has variable size.
Reported-by: <syzbot+92968395eedbdbd3617d@syzkaller.appspotmail.com> Fixes: 7336c1976b8c ("netfilter: cttimeout: decouple unlink and free on netns destruction") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Thu, 19 May 2022 22:02:04 +0000 (00:02 +0200)]
netfilter: conntrack: re-fetch conntrack after insertion
In case the conntrack is clashing, insertion can free skb->_nfct and
set skb->_nfct to the already-confirmed entry.
This wasn't found before because the conntrack entry and the extension
space used to free'd after an rcu grace period, plus the race needs
events enabled to trigger.
Reported-by: <syzbot+793a590957d9c1b96620@syzkaller.appspotmail.com> Fixes: 82ae35d224ae ("netfilter: conntrack: introduce clash resolution on insertion race") Fixes: 0b331c716b85 ("netfilter: conntrack: free extension area immediately") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Miaoqian Lin [Thu, 26 May 2022 14:52:08 +0000 (18:52 +0400)]
net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
mv88e6xxx_mdio_register() pass the device node to of_mdiobus_register().
We don't need the device node after it.
Add missing of_node_put() to avoid refcount leak.
Fixes: b34277b7205d ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Miaoqian Lin [Thu, 26 May 2022 08:52:08 +0000 (12:52 +0400)]
net: ethernet: ti: am65-cpsw-nuss: Fix some refcount leaks
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
am65_cpsw_init_cpts() and am65_cpsw_nuss_probe() don't release
the refcount in error case.
Add missing of_node_put() to avoid refcount leak.
Fixes: 1448b012fa6c ("net: ethernet: ti: am65-cpsw-nuss: enable packet timestamping support") Fixes: e7364a21077b ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 26 May 2022 08:02:42 +0000 (11:02 +0300)]
net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()
The "fsp->location" variable comes from user via ethtool_get_rxnfc().
Check that it is valid to prevent an out of bounds read.
Fixes: 754bb21bfd99 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Ray [Thu, 26 May 2022 00:17:46 +0000 (17:17 -0700)]
net: sched: fixed barrier to prevent skbuff sticking in qdisc backlog
In qdisc_run_begin(), smp_mb__before_atomic() used before test_bit()
does not provide any ordering guarantee as test_bit() is not an atomic
operation. This, added to the fact that the spin_trylock() call at
the beginning of qdisc_run_begin() does not guarantee acquire
semantics if it does not grab the lock, makes it possible for the
following statement :
if (test_bit(__QDISC_STATE_MISSED, &qdisc->state))
to be executed before an enqueue operation called before
qdisc_run_begin().
In the above scenario, CPU 1 and CPU 2 both try to grab the
qdisc->seqlock at the same time. Only CPU 2 succeeds and enters the
bypass code path, where it emits its skb then calls __qdisc_run().
CPU1 fails, sets MISSED and goes down the traditionnal enqueue() +
dequeue() code path. But when executing qdisc_run_begin() for the
second time, after enqueuing its skbuff, it sees the MISSED bit still
set (by itself) and consequently chooses to exit early without setting
it again nor trying to grab the spinlock again.
Meanwhile CPU2 has seen MISSED = 1, cleared it, checked the queue
and found it empty, so it returned.
At the end of the sequence, we end up with skb1 enqueued in the
backlog, both CPUs out of __dev_xmit_skb(), the MISSED bit not set,
and no __netif_schedule() called made. skb1 will now linger in the
qdisc until somebody later performs a full __qdisc_run(). Associated
to the bypass capacity of the qdisc, and the ability of the TCP layer
to avoid resending packets which it knows are still in the qdisc, this
can lead to serious traffic "holes" in a TCP connection.
We fix this by replacing the smp_mb__before_atomic() / test_bit() /
set_bit() / smp_mb__after_atomic() sequence inside qdisc_run_begin()
by a single test_and_set_bit() call, which is more concise and
enforces the needed memory barriers.
Fixes: e19f219577e6 ("net: sched: add barrier to ensure correct ordering for lockless qdisc") Signed-off-by: Vincent Ray <vray@kalrayinc.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220526001746.2437669-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Walle [Wed, 25 May 2022 23:12:39 +0000 (01:12 +0200)]
net: lan966x: check devm_of_phy_get() for -EDEFER_PROBE
At the moment, if devm_of_phy_get() returns an error the serdes
simply isn't set. While it is bad to ignore an error in general, there
is a particular bug that network isn't working if the serdes driver is
compiled as a module. In that case, devm_of_phy_get() returns
-EDEFER_PROBE and the error is silently ignored.
The serdes is optional, it is not there if the port is using RGMII, in
which case devm_of_phy_get() returns -ENODEV. Rearrange the error
handling so that -ENODEV will be handled but other error codes will
abort the probing.
Phil Sutter [Tue, 24 May 2022 12:50:01 +0000 (14:50 +0200)]
netfilter: nft_limit: Clone packet limits' cost value
When cloning a packet-based limit expression, copy the cost value as
well. Otherwise the new limit is not functional anymore.
Fixes: 062d62c00def9 ("netfilter: nft_limit: move stateful fields out of expression data") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_tables: disallow non-stateful expression in sets earlier
Since bf2e6126db7d ("netfilter: nft_dynset: dynamic stateful expression
instantiation"), it is possible to attach stateful expressions to set
elements.
ea3cf8101c0d ("netfilter: nf_tables: split set destruction in deactivate
and destroy phase") introduces conditional destruction on the object to
accomodate transaction semantics.
nft_expr_init() calls expr->ops->init() first, then check for
NFT_STATEFUL_EXPR, this stills allows to initialize a non-stateful
lookup expressions which points to a set, which might lead to UAF since
the set is not properly detached from the set->binding for this case.
Anyway, this combination is non-sense from nf_tables perspective.
This patch fixes this problem by checking for NFT_STATEFUL_EXPR before
expr->ops->init() is called.
The reporter provides a KASAN splat and a poc reproducer (similar to
those autogenerated by syzbot to report use-after-free errors). It is
unknown to me if they are using syzbot or if they use similar automated
tool to locate the bug that they are reporting.
For the record, this is the KASAN splat.
[ 85.431824] ==================================================================
[ 85.432901] BUG: KASAN: use-after-free in nf_tables_bind_set+0x81b/0xa20
[ 85.433825] Write of size 8 at addr ffff8880286f0e98 by task poc/776
[ 85.434756]
[ 85.434999] CPU: 1 PID: 776 Comm: poc Tainted: G W 5.18.0+ #2
[ 85.436023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Fixes: 29610df11a8f ("netfilter: nf_tables: add helper functions for expression handling") Reported-and-tested-by: Aaron Adams <edg-e@nccgroup.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Daniel Borkmann [Tue, 24 May 2022 22:56:18 +0000 (00:56 +0200)]
net, neigh: Set lower cap for neigh_managed_work rearming
Yuwei reported that plain reuse of DELAY_PROBE_TIME to rearm work queue
in neigh_managed_work is problematic if user explicitly configures the
DELAY_PROBE_TIME to 0 for a neighbor table. Such misconfig can then hog
CPU to 100% processing the system work queue. Instead, set lower interval
bound to HZ which is totally sufficient. Yuwei is additionally looking
into making the interval separately configurable from DELAY_PROBE_TIME.
liuyacan [Wed, 25 May 2022 08:54:08 +0000 (16:54 +0800)]
net/smc: set ini->smcrv2.ib_dev_v2 to NULL if SMC-Rv2 is unavailable
In the process of checking whether RDMAv2 is available, the current
implementation first sets ini->smcrv2.ib_dev_v2, and then allocates
smc buf desc and register rmb, but the latter may fail. In this case,
the pointer should be reset.
luyun [Wed, 25 May 2022 03:18:19 +0000 (11:18 +0800)]
selftests/net: enable lo.accept_local in psock_snd test
The psock_snd test sends and receives packets over loopback, and
the test results depend on parameter settings:
Set rp_filter=0,
or set rp_filter=1 and accept_local=1
so that the test will pass. Otherwise, this test will fail with
Resource temporarily unavailable:
sudo ./psock_snd.sh
dgram
tx: 128
rx: 142
./psock_snd: recv: Resource temporarily unavailable
For most distro kernel releases(like Ubuntu or Centos), the parameter
rp_filter is enabled by default, so it's necessary to enable the
parameter lo.accept_local in psock_snd test. And this test runs
inside a netns, changing a sysctl is fine.
Signed-off-by: luyun <luyun@kylinos.cn> Reviewed-by: Jackie Liu <liuyun01@kylinos.cn> Tested-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20220525031819.866684-1-luyun_611@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: ethernet: ti: am65-cpsw: Fix fwnode passed to phylink_create()
am65-cpsw-nuss driver incorrectly uses fwnode member of common
ethernet device's "struct device_node" instead of using fwnode
member of the port's "struct device_node" in phylink_create().
This results in all ports having the same phy data when there
are multiple ports with their phy properties populated in their
respective nodes rather than the common ethernet device node.
Fix it here by using fwnode member of the port's node.
Jakub Kicinski [Thu, 26 May 2022 04:36:19 +0000 (21:36 -0700)]
Merge branch 'amt-fix-several-bugs'
Taehee Yoo says:
====================
amt: fix several bugs
This patchset fixes several bugs in amt module
First patch fixes typo.
Second patch fixes wrong return value of amt_update_handler().
A relay finds a tunnel if it receives an update message from the gateway.
If it can't find a tunnel, amt_update_handler() should return an error,
not success. But it always returns success.
Third patch fixes a possible memory leak in amt_rcv().
A skb would not be freed if an amt interface doesn't have a socket.
====================
Taehee Yoo [Mon, 23 May 2022 16:17:08 +0000 (16:17 +0000)]
amt: fix possible memory leak in amt_rcv()
If an amt receives packets and it finds socket.
If it can't find a socket, it should free a received skb.
But it doesn't.
So, a memory leak would possibly occur.
Fixes: 19284cc854b3 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Mon, 23 May 2022 16:17:07 +0000 (16:17 +0000)]
amt: fix return value of amt_update_handler()
If a relay receives an update message, it lookup a tunnel.
and if there is no tunnel for that message, it should be treated
as an error, not a success.
But amt_update_handler() returns false, which means success.
Fixes: 19284cc854b3 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Mon, 23 May 2022 16:17:06 +0000 (16:17 +0000)]
amt: fix typo in amt
AMT_MSG_TEARDOWM is defined,
But it should be AMT_MSG_TEARDOWN.
Fixes: 1470160287c4 ("amt: add control plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 25 May 2022 19:22:58 +0000 (12:22 -0700)]
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
Linus Torvalds [Wed, 25 May 2022 18:47:25 +0000 (11:47 -0700)]
Merge branch 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. This adds cpu controller selftests and there
are a couple code cleanup patches"
* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: remove the superfluous judgment
cgroup: Make cgroup_debug static
kseltest/cgroup: Make test_stress.sh work if run interactively
kselftest/cgroup: fix test_stress.sh to use OUTPUT dir
cgroup: Add config file to cgroup selftest suite
cgroup: Add test_cpucg_max_nested() testcase
cgroup: Add test_cpucg_max() testcase
cgroup: Add test_cpucg_nested_weight_underprovisioned() testcase
cgroup: Adding test_cpucg_nested_weight_overprovisioned() testcase
cgroup: Add test_cpucg_weight_underprovisioned() testcase
cgroup: Add test_cpucg_weight_overprovisioned() testcase
cgroup: Add test_cpucg_stats() testcase to cgroup cpu selftests
cgroup: Add new test_cpu.c test suite in cgroup selftests
Linus Torvalds [Wed, 25 May 2022 18:32:53 +0000 (11:32 -0700)]
Merge tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests and framework:
- introduce _NULL and _NOT_NULL macros to pointer error checks
- rework kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- add ability to specify suite-level init and exit functions"
* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
kunit: tool: Use qemu-system-i386 for i386 runs
kunit: fix executor OOM error handling logic on non-UML
kunit: tool: update riscv QEMU config with new serial dependency
kcsan: test: use new suite_{init,exit} support
kunit: tool: Add list of all valid test configs on UML
kunit: take `kunit_assert` as `const`
kunit: tool: misc cleanups
kunit: tool: minor cosmetic cleanups in kunit_parser.py
kunit: tool: make parser stop overwriting status of suites w/ no_tests
kunit: tool: remove dead parse_crash_in_log() logic
kunit: tool: print clearer error message when there's no TAP output
kunit: tool: stop using a shell to run kernel under QEMU
kunit: tool: update test counts summary line format
kunit: bail out of test filtering logic quicker if OOM
lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
kunit: Rework kunit_resource allocation policy
kunit: fix debugfs code to use enum kunit_status, not bool
kfence: test: use new suite_{init/exit} support, add .kunitconfig
kunit: add ability to specify suite-level init and exit functions
kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
...
Linus Torvalds [Wed, 25 May 2022 18:30:21 +0000 (11:30 -0700)]
Merge tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests:
- add mips support for kprobe args string and syntax tests
- updates to resctrl test to use kselftest framework
- fixes, cleanups, and enhancements to tests"
* tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftests/ir : Improve readability of modprobe error message
selftests/resctrl: Fix null pointer dereference on open failed
selftests/resctrl: Add missing SPDX license to Makefile
selftests/resctrl: Update README about using kselftest framework to build/run resctrl_tests
selftests/resctrl: Make resctrl_tests run using kselftest framework
selftests/resctrl: Fix resctrl_tests' return code to work with selftest framework
selftests/resctrl: Change the default limited time to 120 seconds
selftests/resctrl: Kill child process before parent process terminates if SIGTERM is received
selftests/resctrl: Print a message if the result of MBM&CMT tests is failed on Intel CPU
selftests/resctrl: Extend CPU vendor detection
selftests/x86/corrupt_xstate_header: Use provided __cpuid_count() macro
selftests/x86/amx: Use provided __cpuid_count() macro
selftests/vm/pkeys: Use provided __cpuid_count() macro
selftests: Provide local define of __cpuid_count()
selftests/damon: add damon to selftests root Makefile
selftests/binderfs: Improve message to provide more info
selftests: mqueue: drop duplicate min definition
selftests/ftrace: add mips support for kprobe args syntax tests
selftests/ftrace: add mips support for kprobe args string tests
Linus Torvalds [Wed, 25 May 2022 18:17:41 +0000 (11:17 -0700)]
Merge tag 'docs-5.19' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It was a moderately busy cycle for documentation; highlights include:
- After a long period of inactivity, the Japanese translations are
seeing some much-needed maintenance and updating.
- Reworked IOMMU documentation
- Some new documentation for static-analysis tools
- A new overall structure for the memory-management documentation.
This is an LSFMM outcome that, it is hoped, will help encourage
developers to fill in the many gaps. Optimism is eternal...but
hopefully it will work.
- More Chinese translations.
Plus the usual typo fixes, updates, etc"
* tag 'docs-5.19' of git://git.lwn.net/linux: (70 commits)
docs: pdfdocs: Add space for chapter counts >= 100 in TOC
docs/zh_CN: Add dev-tools/gdb-kernel-debugging.rst Chinese translation
input: Docs: correct ntrig.rst typo
input: Docs: correct atarikbd.rst typos
MAINTAINERS: Become the docs/zh_CN maintainer
docs/zh_CN: fix devicetree usage-model translation
mm,doc: Add new documentation structure
Documentation: drop more IDE boot options and ide-cd.rst
Documentation/process: use scripts/get_maintainer.pl on patches
MAINTAINERS: Add entry for DOCUMENTATION/JAPANESE
docs/trans/ja_JP/howto: Don't mention specific kernel versions
docs/ja_JP/SubmittingPatches: Request summaries for commit references
docs/ja_JP/SubmittingPatches: Add Suggested-by as a standard signature
docs/ja_JP/SubmittingPatches: Randy has moved
docs/ja_JP/SubmittingPatches: Suggest the use of scripts/get_maintainer.pl
docs/ja_JP/SubmittingPatches: Update GregKH links
Documentation/sysctl: document max_rcu_stall_to_panic
Documentation: add missing angle bracket in cgroup-v2 doc
Documentation: dev-tools: use literal block instead of code-block
docs/zh_CN: add vm numa translation
...
Linus Torvalds [Wed, 25 May 2022 17:32:08 +0000 (10:32 -0700)]
Merge tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Offload writing printk() messages on consoles to per-console
kthreads.
It prevents soft-lockups when an extensive amount of messages is
printed. It was observed, for example, during boot of large systems
with a lot of peripherals like disks or network interfaces.
It prevents live-lockups that were observed, for example, when
messages about allocation failures were reported and a CPU handled
consoles instead of reclaiming the memory. It was hard to solve even
with rate limiting because it would need to take into account the
amount of messages and the speed of all consoles.
It is a must to have for real time. Otherwise, any printk() might
break latency guarantees.
The per-console kthreads allow to handle each console on its own
speed. Slow consoles do not longer slow down faster ones. And
printk() does not longer unpredictably slows down various code paths.
There are situations when the kthreads are either not available or
not reliable, for example, early boot, suspend, or panic. In these
situations, printk() uses the legacy mode and tries to handle
consoles immediately.
- Add documentation for the printk index.
* tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk, tracing: fix console tracepoint
printk: remove @console_locked
printk: extend console_lock for per-console locking
printk: add kthread console printers
printk: add functions to prefer direct printing
printk: add pr_flush()
printk: move buffer definitions into console_emit_next_record() caller
printk: refactor and rework printing logic
printk: add con_printk() macro for console details
printk: call boot_delay_msec() in printk_delay()
printk: get caller_id/timestamp after migration disable
printk: wake waiters for safe and NMI contexts
printk: wake up all waiters
printk: add missing memory barrier to wake_up_klogd()
printk: cpu sync always disable interrupts
printk: rename cpulock functions
printk/index: Printk index feature documentation
MAINTAINERS: Add printk indexing maintainers on mention of printk_index
Linus Torvalds [Wed, 25 May 2022 17:24:04 +0000 (10:24 -0700)]
Merge tag 'slab-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Conversion of slub_debug stack traces to stackdepot, allowing more
useful debugfs-based inspection for e.g. memory leak debugging.
Allocation and free debugfs info now includes full traces and is
sorted by the unique trace frequency.
The stackdepot conversion was already attempted last year but
reverted by 7e28eda20a24. The memory overhead (while not actually
enabled on boot) has been meanwhile solved by making the large
stackdepot allocation dynamic. The xfstest issues haven't been
reproduced on current kernel locally nor in -next, so the slab cache
layout changes that originally made that bug manifest were probably
not the root cause.
- Refactoring of dma-kmalloc caches creation.
- Trivial cleanups such as removal of unused parameters, fixes and
clarifications of comments.
- Hyeonggon Yoo joins as a reviewer.
* tag 'slab-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
MAINTAINERS: add myself as reviewer for slab
mm/slub: remove unused kmem_cache_order_objects max
mm: slab: fix comment for __assume_kmalloc_alignment
mm: slab: fix comment for ARCH_KMALLOC_MINALIGN
mm/slub: remove unneeded return value of slab_pad_check
mm/slab_common: move dma-kmalloc caches creation into new_kmalloc_cache()
mm/slub: remove meaningless node check in ___slab_alloc()
mm/slub: remove duplicate flag in allocate_slab()
mm/slub: remove unused parameter in setup_object*()
mm/slab.c: fix comments
slab, documentation: add description of debugfs files for SLUB caches
mm/slub: sort debugfs output by frequency of stack traces
mm/slub: distinguish and print stack traces in debugfs files
mm/slub: use stackdepot to save stack trace in objects
mm/slub: move struct track init out of set_track()
lib/stackdepot: allow requesting early initialization dynamically
mm/slub, kunit: Make slub_kunit unaffected by user specified flags
mm/slab: remove some unused functions
Linus Torvalds [Wed, 25 May 2022 16:02:19 +0000 (09:02 -0700)]
linux/types.h: reinstate "__bitwise__" macro for user space use
Commit dcde58fe2922 ("linux/types.h: remove unnecessary __bitwise__")
was right that there are no users of __bitwise__ in the kernel, but it
turns out there are user space users of it that do expect it.
It is, after all, in the uapi directory, so user space usage is to be
expected.
Instead of reverting the commit completely, let's just clarify the
situation so that it doesn't happen again, and have some in-code
explanations for why that "__bitwise__" still exists.
Sean Young [Wed, 25 May 2022 13:08:30 +0000 (14:08 +0100)]
media: lirc: revert removal of unused feature flags
Commit 741718ef582e ("media: lirc: remove unused lirc features") removed
feature flags which were never implemented, but they are still used by
the lirc daemon went built from source.
Reinstate these symbols in order not to break the lirc build.
xfrm: do not set IPv4 DF flag when encapsulating IPv6 frames <= 1280 bytes.
One may want to have DF set on large packets to support discovering
path mtu and limiting the size of generated packets (hence not
setting the XFRM_STATE_NOPMTUDISC tunnel flag), while still
supporting networks that are incapable of carrying even minimal
sized IPv6 frames (post encapsulation).
Having IPv4 Don't Frag bit set on encapsulated IPv6 frames that
are not larger than the minimum IPv6 mtu of 1280 isn't useful,
because the resulting ICMP Fragmentation Required error isn't
actionable (even assuming you receive it) because IPv6 will not
drop it's path mtu below 1280 anyway. While the IPv4 stack
could prefrag the packets post encap, this requires the ICMP
error to be successfully delivered and causes a loss of the
original IPv6 frame (thus requiring a retransmit and latency
hit). Luckily with IPv4 if we simply don't set the DF flag,
we'll just make further fragmenting the packets some other
router's problems.
We'll still learn the correct IPv4 path mtu through encapsulation
of larger IPv6 frames.
I'm still not convinced this patch is entirely sufficient to make
everything happy... but I don't see how it could possibly
make things worse.
See also recent: a85d2a4cfd73 'xfrm: fix tunnel model fragmentation behavior'
and friends
Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Lina Wang <lina.wang@mediatek.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Maciej Zenczykowski <maze@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
A non-zero return value from pfkey_broadcast() does not necessarily mean
an error occurred as this function returns -ESRCH when no registered
listener received the message. In particular, a call with
BROADCAST_PROMISC_ONLY flag and null one_sk argument can never return
zero so that this commit in fact prevents processing any PF_KEY message.
One visible effect is that racoon daemon fails to find encryption
algorithms like aes and refuses to start.
Excluding -ESRCH return value would fix this but it's not obvious that
we really want to bail out here and most other callers of
pfkey_broadcast() also ignore the return value. Also, as pointed out by
Steffen Klassert, PF_KEY is kind of deprecated and newer userspace code
should use netlink instead so that we should only disturb the code for
really important fixes.
v2: add a comment explaining why is the return value ignored
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Linus Torvalds [Wed, 25 May 2022 02:55:07 +0000 (19:55 -0700)]
Merge tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache
Pull page cache updates from Matthew Wilcox:
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first
argument like ->read_folio
* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
nilfs2: Fix some kernel-doc comments
Appoint myself page cache maintainer
fs: Remove aops->freepage
secretmem: Convert to free_folio
nfs: Convert to free_folio
orangefs: Convert to free_folio
fs: Add free_folio address space operation
fs: Convert drop_buffers() to use a folio
fs: Change try_to_free_buffers() to take a folio
jbd2: Convert release_buffer_page() to use a folio
jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
reiserfs: Convert release_buffer_page() to use a folio
fs: Remove last vestiges of releasepage
ubifs: Convert to release_folio
reiserfs: Convert to release_folio
orangefs: Convert to release_folio
ocfs2: Convert to release_folio
nilfs2: Remove comment about releasepage
nfs: Convert to release_folio
jfs: Convert to release_folio
...
Linus Torvalds [Wed, 25 May 2022 02:21:30 +0000 (19:21 -0700)]
Merge tag 'iomap-5.19-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"There's a couple of corrections sent in by Andreas for some accounting
errors.
The biggest change this time around is that writeback errors longer
clear pageuptodate nor does XFS invalidate the page cache anymore.
This brings XFS (and gfs2/zonefs) behavior in line with every other
Linux filesystem driver, and fixes some UAF bugs that only cropped up
after willy turned on multipage folios for XFS in 5.18-rc1.
Regrettably, it took all the way to the end of the 5.18 cycle to find
the source of these bugs and reach a consensus that XFS' writeback
failure behavior from 20 years ago is no longer necessary.
Summary:
- Fix a couple of accounting errors in the buffered io code.
- Discontinue the practice of marking folios !uptodate and
invalidating them when writeback fails.
This fixes some UAF bugs when multipage folios are enabled, and
brings the behavior of XFS/gfs/zonefs into alignment with the
behavior of all the other Linux filesystems"
* tag 'iomap-5.19-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: don't invalidate folios after writeback errors
iomap: iomap_write_end cleanup
iomap: iomap_write_failed fix
Linus Torvalds [Wed, 25 May 2022 02:09:16 +0000 (19:09 -0700)]
Merge tag 'dlm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This includes several large patches to improve endian handling and
remove sparse warnings. The code previously used in/out, in-place
endianness conversion functions.
Other code cleanup includes the list iterator changes.
Finally, a long standing bug was found and fixed, caused by missed
decrement on an lock struct ref count"
* tag 'dlm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (28 commits)
dlm: use kref_put_lock in __put_lkb
dlm: use kref_put_lock in put_rsb
dlm: remove unnecessary error assign
dlm: fix missing lkb refcount handling
fs: dlm: cast resource pointer to uintptr_t
dlm: replace usage of found with dedicated list iterator variable
dlm: remove usage of list iterator for list_add() after the loop body
dlm: fix pending remove if msg allocation fails
dlm: fix wake_up() calls for pending remove
dlm: check required context while close
dlm: cleanup lock handling in dlm_master_lookup
dlm: remove found label in dlm_master_lookup
dlm: remove __user conversion warnings
dlm: move conversion to compile time
dlm: use __le types for dlm messages
dlm: use __le types for rcom messages
dlm: use __le types for dlm header
dlm: use __le types for options header
dlm: add __CHECKER__ for false positives
dlm: move global to static inits
...
Linus Torvalds [Wed, 25 May 2022 02:04:46 +0000 (19:04 -0700)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various bug fixes and cleanups for ext4.
In particular, move the crypto related fucntions from fs/ext4/super.c
into a new fs/ext4/crypto.c, and fix a number of bugs found by fuzzers
and error injection tools"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
ext4: only allow test_dummy_encryption when supported
ext4: fix bug_on in __es_tree_search
ext4: avoid cycles in directory h-tree
ext4: verify dir block before splitting it
ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state
ext4: fix bug_on in ext4_writepages
ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()
ext4: cleanup function defs from ext4.h into crypto.c
ext4: move ext4 crypto code to its own file crypto.c
ext4: fix memory leak in parse_apply_sb_mount_options()
ext4: reject the 'commit' option on ext2 filesystems
ext4: remove duplicated #include of dax.h in inode.c
ext4: fix race condition between ext4_write and ext4_convert_inline_data
ext4: convert symlink external data block mapping to bdev
ext4: add nowait mode for ext4_getblk()
ext4: fix journal_ioprio mount option handling
ext4: mark group as trimmed only if it was fully scanned
ext4: fix use-after-free in ext4_rename_dir_prepare
ext4: add unmount filesystem message
ext4: remove unnecessary conditionals
...
Linus Torvalds [Wed, 25 May 2022 02:00:41 +0000 (19:00 -0700)]
Merge tag 'gfs2-v5.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Clean up the allocation of glocks that have an address space attached
- Quota locking fix and quota iomap conversion
- Fix the FITRIM error reporting
- Some list iterator cleanups
* tag 'gfs2-v5.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Convert function bh_get to use iomap
gfs2: use i_lock spin_lock for inode qadata
gfs2: Return more useful errors from gfs2_rgrp_send_discards()
gfs2: Use container_of() for gfs2_glock(aspace)
gfs2: Explain some direct I/O oddities
gfs2: replace 'found' with dedicated list iterator variable
projects / kernel.git / log