Masami Hiramatsu [Thu, 21 Oct 2021 00:55:09 +0000 (09:55 +0900)]
arm64: Recover kretprobe modified return address in stacktrace
Since the kretprobe replaces the function return address with
the kretprobe_trampoline on the stack, stack unwinder shows it
instead of the correct return address.
This checks whether the next return address is the
__kretprobe_trampoline(), and if so, try to find the correct
return address from the kretprobe instance list. For this purpose
this adds 'kr_cur' loop cursor to memorize the current kretprobe
instance.
With this fix, now arm64 can enable
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE, and pass the
kprobe self tests.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Thu, 21 Oct 2021 00:55:00 +0000 (09:55 +0900)]
arm64: kprobes: Make a frame pointer on __kretprobe_trampoline
Make a frame pointer (make the x29 register points the
address of pt_regs->regs[29]) on __kretprobe_trampoline.
This frame pointer will be used by the stacktracer when it is
called from the kretprobe handlers. In this case, the stack
tracer will unwind stack to trampoline_probe_handler() and
find the next frame pointer in the stack frame of the
__kretprobe_trampoline().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Thu, 21 Oct 2021 00:54:51 +0000 (09:54 +0900)]
arm64: kprobes: Record frame pointer with kretprobe instance
Record the frame pointer instead of stack address with kretprobe
instance as the identifier on the instance list.
Since arm64 always enable CONFIG_FRAME_POINTER, we can use the
actual frame pointer (x29).
This will allow the stacktrace code to find the original return
address from the FP alone.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Sven Schnelle [Thu, 21 Oct 2021 00:54:24 +0000 (09:54 +0900)]
kprobes: convert tests to kunit
This converts the kprobes testcases to use the kunit framework.
It adds a dependency on CONFIG_KUNIT, and the output will change
to TAP:
TAP version 14
1..1
# Subtest: kprobes_test
1..4
random: crng init done
ok 1 - test_kprobe
ok 2 - test_kprobes
ok 3 - test_kretprobe
ok 4 - test_kretprobes
ok 1 - kprobes_test
Note that the kprobes testcases are no longer run immediately after
kprobes initialization, but as a late initcall when kunit is
initialized. kprobes itself is initialized with an early initcall,
so the order is still correct.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Arnd Bergmann [Tue, 19 Oct 2021 15:33:13 +0000 (17:33 +0200)]
tracing: use %ps format string to print symbols
clang started warning about excessive stack usage in
hist_trigger_print_key()
kernel/trace/trace_events_hist.c:4723:13: error: stack frame size (1336) exceeds limit (1024) in function 'hist_trigger_print_key' [-Werror,-Wframe-larger-than]
The problem is that there are two 512-byte arrays on the stack if
hist_trigger_stacktrace_print() gets inlined. I don't think this has
changed in the past five years, but something probably changed the
inlining decisions made by the compiler, so the problem is now made
more obvious.
Rather than printing the symbol names into separate buffers, it
seems we can simply use the special %ps format string modifier
to print the pointers symbolically and get rid of both buffers.
Marking hist_trigger_stacktrace_print() would be a simpler
way of avoiding the warning, but that would not address the
excessive stack usage.
tracing: Explain the trace recursion transition bit better
The current text of the explanation of the transition bit in the trace
recursion protection is not very clear. Improve the text, so that when all
the archs no longer have the issue of tracing between a start of a new
(interrupt) context and updating the preempt_count to reflect the new
context, that it may be removed.
ftrace/direct: Do not disable when switching direct callers
Currently to switch a set of "multi" direct trampolines from one
trampoline to another, a full shutdown of the current set needs to be
done, followed by an update to what trampoline the direct callers would
call, and then re-enabling the callers. This leaves a time when the
functions will not be calling anything, and events may be missed.
Instead, use a trick to allow all the functions with direct trampolines
attached will always call either the new or old trampoline while the
switch is happening. To do this, first attach a "dummy" callback via
ftrace to all the functions that the current direct trampoline is attached
to. This will cause the functions to call the "list func" instead of the
direct trampoline. The list function will call the direct trampoline
"helper" that will set the function it should call as it returns back to
the ftrace trampoline.
At this moment, the direct caller descriptor can safely update the direct
call trampoline. The list function will pick either the new or old
function (depending on the memory coherency model of the architecture).
Now removing the dummy function from each of the locations of the direct
trampoline caller, will put back the direct call, but now to the new
trampoline.
A better visual is:
[ Changing direct call from my_direct_1 to my_direct_2 ]
<traced_func>:
call my_direct_1
||||||||||||||||||||
vvvvvvvvvvvvvvvvvvvv
<traced_func>:
call ftrace_caller
<ftrace_caller>:
[..]
call ftrace_ops_list_func
ftrace_ops_list_func()
{
ops->func() -> direct_helper -> set rax to my_direct_1 or my_direct_2
}
Jiri Olsa [Fri, 8 Oct 2021 09:13:34 +0000 (11:13 +0200)]
ftrace: Add multi direct register/unregister interface
Adding interface to register multiple direct functions
within single call. Adding following functions:
register_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
The register_ftrace_direct_multi registers direct function (addr)
with all functions in ops filter. The ops filter can be updated
before with ftrace_set_filter_ip calls.
All requested functions must not have direct function currently
registered, otherwise register_ftrace_direct_multi will fail.
The unregister_ftrace_direct_multi unregisters ops related direct
functions.
tracing: Fix selftest config check for function graph start up test
There's a new test in trace_selftest_startup_function_graph() that
requires the use of ftrace args being supported as well does some tricks
with dynamic tracing. Although this code checks HAVE_DYNAMIC_FTRACE_WITH_ARGS
it fails to check DYNAMIC_FTRACE, and the kernel fails to build due to
that dependency.
Also only define the prototype of trace_direct_tramp() if it is used.
x86/ftrace: Make function graph use ftrace directly
We don't need special hook for graph tracer entry point,
but instead we can use graph_ops::func function to install
the return_hooker.
This moves the graph tracing setup _before_ the direct
trampoline prepares the stack, so the return_hooker will
be called when the direct trampoline is finished.
This simplifies the code, because we don't need to take into
account the direct trampoline setup when preparing the graph
tracer hooker and we can allow function graph tracer on entries
registered with direct trampoline.
Link: https://lkml.kernel.org/r/20211008091336.33616-4-jolsa@kernel.org
[fixed compile error reported by kernel test robot <lkp@intel.com>] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace/x86_64: Have function graph tracer depend on DYNAMIC_FTRACE
The function graph tracer is going to now depend on
ARCH_SUPPORTS_FTRACE_OPS, as that also means that it can support ftrace
args. Since ARCH_SUPPORTS_FTRACE_OPS depends on DYNAMIC_FTRACE, this
means that the function graph tracer for x86_64 will need to depend on
DYNAMIC_FTRACE.
x86/ftrace: Remove fault protection code in prepare_ftrace_return
Removing the fault protection code when writing return_hooker
to stack. As Steven noted:
> That protection was there from the beginning due to being "paranoid",
> considering ftrace was bricking network cards. But that protection
> would not have even protected against that.
Now that there are three different instances of doing the addition trick
to the preempt_count() and NMI_MASK, HARDIRQ_MASK and SOFTIRQ_OFFSET
macros, it deserves a helper function defined in the preempt.h header.
Add the interrupt_context_level() helper and replace the three instances
that do that logic with it.
tracing: Reuse logic from perf's get_recursion_context()
Instead of having branches that adds noise to the branch prediction, use
the addition logic to set the bit for the level of interrupt context that
the state is currently in. This copies the logic from perf's
get_recursion_context() function.
If CONFIG_CFI_CLANG=y, attempting to read an event histogram will cause
the kernel to panic due to failed CFI check.
1. echo 'hist:keys=common_pid' >> events/sched/sched_switch/trigger
2. cat events/sched/sched_switch/hist
3. kernel panics on attempting to read hist
This happens because the sort() function expects a generic
int (*)(const void *, const void *) pointer for the compare function.
To prevent this CFI failure, change tracing map cmp_entries_* function
signatures to match this.
Also, fix the build error reported by the kernel test robot [1].
tracing: Use linker magic instead of recasting ftrace_ops_list_func()
In an effort to enable -Wcast-function-type in the top-level Makefile to
support Control Flow Integrity builds, all function casts need to be
removed.
This means that ftrace_ops_list_func() can no longer be defined as
ftrace_ops_no_ops(). The reason for ftrace_ops_no_ops() is to use that when
an architecture calls ftrace_ops_list_func() with only two parameters
(called from assembly). And to make sure there's no C side-effects, those
archs call ftrace_ops_no_ops() which only has two parameters, as
ftrace_ops_list_func() has four parameters.
Instead of a typecast, use vmlinux.lds.h to define ftrace_ops_list_func() to
arch_ftrace_ops_list_func() that will define the proper set of parameters.
bootconfig: Cleanup dummy headers in tools/bootconfig
Cleanup dummy headers in tools/bootconfig/include except
for tools/bootconfig/include/linux/bootconfig.h.
For this change, I use __KERNEL__ macro to split kernel
header #include and introduce xbc_alloc_mem() and
xbc_free_mem().
bootconfig: Add xbc_get_info() for the node information
Add xbc_get_info() API which allows user to get the
number of used xbc_nodes and the size of bootconfig
data. This is also useful for checking the bootconfig
is initialized or not.
tracing: Disable "other" permission bits in the tracefs files
When building the files in the tracefs file system, do not by default set
any permissions for OTH (other). This will make it easier for admins who
want to define a group for accessing tracefs and not having to first
disable all the permission bits for "other" in the file system.
As tracing can leak sensitive information, it should never by default
allowing all users access. An admin can still set the permission bits for
others to have access, which may be useful for creating a honeypot and
seeing who takes advantage of it and roots the machine.
tracefs: Have tracefs directories not set OTH permission bits by default
The tracefs file system is by default mounted such that only root user can
access it. But there are legitimate reasons to create a group and allow
those added to the group to have access to tracing. By changing the
permissions of the tracefs mount point to allow access, it will allow
group access to the tracefs directory.
There should not be any real reason to allow all access to the tracefs
directory as it contains sensitive information. Have the default
permission of directories being created not have any OTH (other) bits set,
such that an admin that wants to give permission to a group has to first
disable all OTH bits in the file system.
tracing: Initialize upper and lower vars in pid_list_refill_irq()
The upper and lower variables are set as link lists to add into the sparse
array. If they are NULL, after the needed allocations are done, then there
is nothing to add. But they need to be initialized to NULL for this to
work.
tracing: Create a sparse bitmask for pid filtering
When the trace_pid_list was created, the default pid max was 32768.
Creating a bitmask that can hold one bit for all 32768 took up 4096 (one
page). Having a one page bitmask was not much of a problem, and that was
used for mapping pids. But today, systems are bigger and can run more
tasks, and now the default pid_max is usually set to 4194304. Which means
to handle that many pids requires 524288 bytes. Worse yet, the pid_max can
be set to 2^30 (1073741824 or 1G) which would take 134217728 (128M) of
memory to store this array.
Since the pid_list array is very sparsely populated, it is a huge waste of
memory to store all possible bits for each pid when most will not be set.
Instead, use a page table scheme to store the array, and allow this to
handle up to 30 bit pids.
The pid_mask will start out with 256 entries for the first 8 MSB bits.
This will cost 1K for 32 bit architectures and 2K for 64 bit. Each of
these will have a 256 array to store the next 8 bits of the pid (another
1 or 2K). These will hold an 2K byte bitmask (which will cover the LSB
14 bits or 16384 pids).
When the trace_pid_list is allocated, it will have the 1/2K upper bits
allocated, and then it will allocate a cache for the next upper chunks and
the lower chunks (default 6 of each). Then when a bit is "set", these
chunks will be pulled from the free list and added to the array. If the
free list gets down to a lever (default 2), it will trigger an irqwork
that will refill the cache back up.
On clearing a bit, if the clear causes the bitmask to be zero, that chunk
will then be placed back into the free cache for later use, keeping the
need to allocate more down to a minimum.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
tracing: Place trace_pid_list logic into abstract functions
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
x86/kprobes: Fixup return address in generic trampoline handler
In x86, the fake return address on the stack saved by
__kretprobe_trampoline() will be replaced with the real return
address after returning from trampoline_handler(). Before fixing
the return address, the real return address can be found in the
'current->kretprobe_instances'.
However, since there is a window between updating the
'current->kretprobe_instances' and fixing the address on the stack,
if an interrupt happens at that timing and the interrupt handler
does stacktrace, it may fail to unwind because it can not get
the correct return address from 'current->kretprobe_instances'.
This will eliminate that window by fixing the return address
right before updating 'current->kretprobe_instances'.
tracing: Show kretprobe unknown indicator only for kretprobe_trampoline
ftrace shows "[unknown/kretprobe'd]" indicator all addresses in the
kretprobe_trampoline, but the modified address by kretprobe should
be only kretprobe_trampoline+0.
Since the kretprobe replaces the function return address with
the kretprobe_trampoline on the stack, x86 unwinders can not
continue the stack unwinding at that point, or record
kretprobe_trampoline instead of correct return address.
To fix this issue, find the correct return address from task's
kretprobe_instances as like as function-graph tracer does.
With this fix, the unwinder can correctly unwind the stack
from kretprobe event on x86, as below.
x86/kprobes: Push a fake return address at kretprobe_trampoline
Change __kretprobe_trampoline() to push the address of the
__kretprobe_trampoline() as a fake return address at the bottom
of the stack frame. This fake return address will be replaced
with the correct return address in the trampoline_handler().
With this change, the ORC unwinder can check whether the return
address is modified by kretprobes or not.
kprobes: Enable stacktrace from pt_regs in kretprobe handler
Since the ORC unwinder from pt_regs requires setting up regs->ip
correctly, set the correct return address to the regs->ip before
calling user kretprobe handler.
This allows the kretrprobe handler to trace stack from the
kretprobe's pt_regs by stack_trace_save_regs() (eBPF will do
this), instead of stack tracing from the handler context by
stack_trace_save() (ftrace will do this).
arm: kprobes: Make space for instruction pointer on stack
Since arm's __kretprobe_trampoline() saves partial 'pt_regs' on the
stack, 'regs->ARM_pc' (instruction pointer) is not accessible from
the kretprobe handler. This means if instruction_pointer_set() is
used from kretprobe handler, it will break the data on the stack.
Make space for instruction pointer (ARM_pc) on the stack in the
__kretprobe_trampoline() for fixing this problem.
x86/kprobes: Add UNWIND_HINT_FUNC on kretprobe_trampoline()
Add UNWIND_HINT_FUNC on __kretprobe_trampoline() code so that ORC
information is generated on the __kretprobe_trampoline() correctly.
Also, this uses STACK_FRAME_NON_STANDARD_FP(), CONFIG_FRAME_POINTER-
-specific version of STACK_FRAME_NON_STANDARD().
objtool: Ignore unwind hints for ignored functions
If a function is ignored, also ignore its hints. This is useful for the
case where the function ignore is conditional on frame pointers, e.g.
STACK_FRAME_NON_STANDARD_FP().
objtool: Add frame-pointer-specific function ignore
Add a CONFIG_FRAME_POINTER-specific version of
STACK_FRAME_NON_STANDARD() for the case where a function is
intentionally missing frame pointer setup, but otherwise needs
objtool/ORC coverage when frame pointers are disabled.
kprobes: Add kretprobe_find_ret_addr() for searching return address
Introduce kretprobe_find_ret_addr() and is_kretprobe_trampoline().
These APIs will be used by the ORC stack unwinder and ftrace, so that
they can check whether the given address points kretprobe trampoline
code and query the correct return address in that case.
kprobes: treewide: Make it harder to refer kretprobe_trampoline directly
Since now there is kretprobe_trampoline_addr() for referring the
address of kretprobe trampoline code, we don't need to access
kretprobe_trampoline directly.
Make it harder to refer by renaming it to __kretprobe_trampoline().
kprobes: treewide: Remove trampoline_address from kretprobe_trampoline_handler()
The __kretprobe_trampoline_handler() callback, called from low level
arch kprobes methods, has the 'trampoline_address' parameter, which is
entirely superfluous as it basically just replicates:
kprobes: Use bool type for functions which returns boolean value
Use the 'bool' type instead of 'int' for the functions which
returns a boolean value, because this makes clear that those
functions don't return any error code.
kprobes: treewide: Use 'kprobe_opcode_t *' for the code address in get_optimized_kprobe()
Since get_optimized_kprobe() is only used inside kprobes,
it doesn't need to use 'unsigned long' type for 'addr' parameter.
Make it use 'kprobe_opcode_t *' for the 'addr' parameter and
subsequent call of arch_within_optimized_kprobe() also should use
'kprobe_opcode_t *'.
Note that MAX_OPTIMIZED_LENGTH and RELATIVEJUMP_SIZE are defined
by byte-size, but the size of 'kprobe_opcode_t' depends on the
architecture. Therefore, we must be careful when calculating
addresses using those macros.
kprobes: Use IS_ENABLED() instead of kprobes_built_in()
Use IS_ENABLED(CONFIG_KPROBES) instead of kprobes_built_in().
This inline function is introduced only for avoiding #ifdef.
But since now we have IS_ENABLED(), it is no longer needed.
Fix coding style issues reported by checkpatch.pl and update
comments to quote variable names and add "()" to function
name.
One TODO comment in __disarm_kprobe() is removed because
it has been done by following commit.
kprobes: treewide: Cleanup the error messages for kprobes
This clean up the error/notification messages in kprobes related code.
Basically this defines 'pr_fmt()' macros for each files and update
the messages which describes
- what happened,
- what is the kernel going to do or not do,
- is the kernel fine,
- what can the user do about it.
Also, if the message is not needed (e.g. the function returns unique
error code, or other error message is already shown.) remove it,
and replace the message with WARN_*() macros if suitable.
arch_check_ftrace_location() was introduced as a weak function in
commit 6ae476dba1c051 ("kprobes: introduce weak
arch_check_ftrace_location() helper function") to allow architectures
to handle kprobes call site on their own.
Recently, the only architecture (csky) to implement
arch_check_ftrace_location() was migrated to using the common
version.
As a result, further cleanup the code to drop the weak attribute and
rename the function to remove the architecture specific
implementation.
csky: ftrace: Drop duplicate implementation of arch_check_ftrace_location()
The csky specific arch_check_ftrace_location() shadows a weak
implementation of the function in core code that offers the same
functionality but with additional error checking.
Drop the architecture specific function as a step towards further
cleanup in core code.
kprobe: Simplify prepare_kprobe() by dropping redundant version
The function prepare_kprobe() is called during kprobe registration and
is responsible for ensuring any architecture related preparation for
the kprobe is done before returning.
One of two versions of prepare_kprobe() is chosen depending on the
availability of KPROBE_ON_FTRACE in the kernel configuration.
Simplify the code by dropping the version when KPROBE_ON_FTRACE is not
selected - instead relying on kprobe_ftrace() to return false when
KPROBE_ON_FTRACE is not set.
kprobes: Use helper to parse boolean input from userspace
The "enabled" file provides a debugfs interface to arm / disarm
kprobes in the kernel. In order to parse the buffer containing the
values written from userspace, the callback manually parses the user
input to convert it to a boolean value.
As taking a string value from userspace and converting it to boolean
is a common operation, a helper kstrtobool_from_user() is already
available in the kernel. Update the callback to use the common helper
to parse the write buffer from userspace.
kprobes: Do not use local variable when creating debugfs file
debugfs_create_file() takes a pointer argument that can be used during
file operation callbacks (accessible via i_private in the inode
structure). An obvious requirement is for the pointer to refer to
valid memory when used.
When creating the debugfs file to dynamically enable / disable
kprobes, a pointer to local variable is passed to
debugfs_create_file(); which will go out of scope when the init
function returns. The reason this hasn't triggered random memory
corruption is because the pointer is not accessed during the debugfs
file callbacks.
Since the enabled state is managed by the kprobes_all_disabled global
variable, the local variable is not needed. Fix the incorrect (and
unnecessary) usage of local variable during debugfs_file_create() by
passing NULL instead.
Merge tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull ksmbd fixes from Steve French:
"Five fixes for the ksmbd kernel server, including three security
fixes:
- remove follow symlinks support
- use LOOKUP_BENEATH to prevent out of share access
- SMB3 compounding security fix
- fix for returning the default streams correctly, fixing a bug when
writing ppt or doc files from some clients
- logging more clearly that ksmbd is experimental (at module load
time)"
* tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: use LOOKUP_BENEATH to prevent the out of share access
ksmbd: remove follow symlinks support
ksmbd: check protocol id in ksmbd_verify_smb_message()
ksmbd: add default data stream name in FILE_STREAM_INFORMATION
ksmbd: log that server is experimental at module load
Merge tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Fix two EDAC drivers using the wrong value type for the DIMM mode"
* tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/dmc520: Assign the proper type to dimm->edac_mode
EDAC/synopsys: Fix wrong value type assignment for edac_mode
Merge tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix thermal shutdown after a suspend/resume due to a wrong TCC value
restored on Intel platform (Antoine Tenart)
- Fix potential buffer overflow when building the list of policies. The
buffer size is not updated after writing to it (Dan Carpenter)
- Fix wrong check against IS_ERR instead of NULL (Ansuel Smith)
* tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/tsens: Fix wrong check for tzd in irq handlers
thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
thermal/drivers/int340x: Do not set a wrong tcc offset on resume
Merge tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Prevent sending the wrong signal when protection keys are enabled
and the kernel handles a fault in the vsyscall emulation.
- Invoke early_reserve_memory() before invoking e820_memory_setup()
which is required to make the Xen dom0 e820 hooks work correctly.
- Use the correct data type for the SETZ operand in the EMQCMDS
instruction wrapper.
- Prevent undefined behaviour to the potential unaligned accesss in
the instruction decoder library"
* tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses
x86/asm: Fix SETZ size enqcmds() build failure
x86/setup: Call early_reserve_memory() earlier
x86/fault: Fix wrong signal when vsyscall fails with pkey
Merge tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for the recently introduced regression in posix CPU
timers which failed to stop the timer when requested. That caused
unexpected signals to be sent to the process/thread causing
malfunction"
* tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Prevent spuriously armed 0-value itimer
Merge tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Work around a bad GIC integration on a Renesas platform which can't
handle byte-sized MMIO access
- Plug a potential memory leak in the GICv4 driver
- Fix a regression in the Armada 370-XP IPI code which was caused by
issuing EOI instack of ACK.
- A couple of small fixes here and there"
* tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic: Work around broken Renesas integration
irqchip/renesas-rza1: Use semicolons instead of commas
irqchip/gic-v3-its: Fix potential VPE leak on error
irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
irqchip/mbigen: Repair non-kernel-doc notation
irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent
irqchip/armada-370-xp: Fix ack/eoi breakage
Documentation: Fix irq-domain.rst build warning
Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts,
lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache,
debug, and pagemap)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix uninitialized use in overcommit_policy_handler
mm/memory_failure: fix the missing pte_unmap() call
kasan: always respect CONFIG_KASAN_STACK
sh: pgtable-3level: fix cast to pointer from integer of different size
mm/debug: sync up latest migrate_reason to migrate_reason_names
mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN
mm: fs: invalidate bh_lrus for only cold path
lib/zlib_inflate/inffast: check config in C to avoid unused function warning
tools/vm/page-types: remove dependency on opt_file for idle page tracking
scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error
ocfs2: drop acl cache for directories too
mm/shmem.c: fix judgment error in shmem_is_huge()
xtensa: increase size of gcc stack frame check
mm/damon: don't use strnlen() with known-bogus source length
kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS
mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Thirty-three fixes, I'm afraid.
Essentially the build up from the last couple of weeks while I've been
dealling with Linux Plumbers conference infrastructure issues. It's
mostly the usual assortment of spelling fixes and minor corrections.
The only core relevant changes are to the sd driver to reduce the spin
up message spew and fix a small memory leak on the freeing path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
scsi: ses: Retry failed Send/Receive Diagnostic commands
scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
scsi: lpfc: Fix gcc -Wstringop-overread warning, again
scsi: lpfc: Use correct scnprintf() limit
scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
scsi: core: Remove 'current_tag'
scsi: acornscsi: Remove tagged queuing vestiges
scsi: fas216: Kill scmd->tag
scsi: qla2xxx: Restore initiator in dual mode
scsi: ufs: core: Unbreak the reset handler
scsi: sd_zbc: Support disks with more than 2**32 logical blocks
scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
scsi: bsg: Fix device unregistration
scsi: sd: Make sd_spinup_disk() less noisy
scsi: ufs: ufs-pci: Fix Intel LKF link stability
scsi: mpt3sas: Clean up some inconsistent indenting
scsi: megaraid: Clean up some inconsistent indenting
scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
scsi: Remove SCSI CDROM MAINTAINERS entry
scsi: megaraid: Fix Coccinelle warning
...
Merge tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"This one looks a bit bigger than it is, but that's mainly because 2/3
of it is enabling IORING_OP_CLOSE to close direct file descriptors.
We've had a few folks using them and finding it confusing that the way
to close them is through using -1 for file update, this just brings
API symmetry for direct descriptors. Hence I think we should just do
this now and have a better API for 5.15 release. There's some room for
de-duplicating the close code, but we're leaving that for the next
merge window.
Outside of that, just small fixes:
- Poll race fixes (Hao)
- io-wq core dump exit fix (me)
- Reschedule around potentially intensive tctx and buffer iterators
on teardown (me)
- Fix for always ending up punting files update to io-wq (me)
- Put the provided buffer meta data under memcg accounting (me)
- Tweak for io_write(), removing dead code that was added with the
iterator changes in this release (Pavel)"
* tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
io_uring: make OP_CLOSE consistent with direct open
io_uring: kill extra checks in io_write()
io_uring: don't punt files update to io-wq unconditionally
io_uring: put provided buffer meta data under memcg accounting
io_uring: allow conditional reschedule for intensive iterators
io_uring: fix potential req refcount underflow
io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow
io_uring: fix race between poll completion and cancel_hash insertion
io-wq: ensure we exit if thread group is exiting
Merge tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- keep ctrl->namespaces ordered (Christoph Hellwig)
- fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi
Grimberg)
- handled updated hw_queues in nvme-fc more carefully (Daniel
Wagner, James Smart)
- md lock order fix (Christoph)
- fallocate locking fix (Ming)
- blktrace UAF fix (Zhihao)
- rq-qos bio tracking fix (Ming)
* tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
block: hold ->invalidate_lock in blkdev_fallocate
blktrace: Fix uaf in blk_trace access after removing by sysfs
block: don't call rq_qos_ops->done_bio if the bio isn't tracked
md: fix a lock order reversal in md_alloc
nvme: keep ctrl->namespaces ordered
nvme-tcp: fix incorrect h2cdata pdu offset accounting
nvme-fc: remove freeze/unfreeze around update_nr_hw_queues
nvme-fc: avoid race between time out and tear down
nvme-fc: update hardware queues before using them
Merge tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Some minor cleanups and fixes of some theoretical bugs, as well as a
fix of a bug introduced in 5.15-rc1"
* tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/x86: fix PV trap handling on secondary processors
xen/balloon: fix balloon kthread freezing
swiotlb-xen: this is PV-only on x86
xen/pci-swiotlb: reduce visibility of symbols
PCI: only build xen-pcifront in PV-enabled environments
swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests
Xen/gntdev: don't ignore kernel unmapping error
xen/x86: drop redundant zeroing from cpu_initialize_context()
Merge tag 'erofs-for-5.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Two bugfixes to fix the 4KiB blockmap chunk format availability and a
dangling pointer usage. There is also a trivial cleanup to clarify
compacted_2b if compacted_4b_initial > totalidx.
Summary:
- fix the dangling pointer use in erofs_lookup tracepoint
- fix unsupported chunk format check
- zero out compacted_2b if compacted_4b_initial > totalidx"
* tag 'erofs-for-5.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clear compacted_2b if compacted_4b_initial > totalidx
erofs: fix misbehavior of unsupported chunk format check
erofs: fix up erofs_lookup tracepoint
Merge tag '5.15-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six small cifs/smb3 fixes, two for stable:
- important fix for deferred close (found by a git functional test)
related to attribute caching on close.
- four (two cosmetic, two more serious) small fixes for problems
pointed out by smatch via Dan Carpenter
- fix for comment formatting problems pointed out by W=1"
* tag '5.15-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix incorrect check for null pointer in header_assemble
smb3: correct server pointer dereferencing check to be more consistent
smb3: correct smb3 ACL security descriptor
cifs: Clear modified attribute bit from inode flags
cifs: Deal with some warnings from W=1
cifs: fix a sign extension bug
Merge tag 'staging-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 5.15-rc3:
- greybus tty use-after-free bugfix
- r8188eu ioctl overlap build warning fix
Note, the r8188eu ioctl has been entirely removed for 5.16-rc1, but
it's good to get this fixed now for people using this in 5.15.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: fix -Wrestrict warnings
staging: greybus: uart: fix tty use after free
Merge tag 'usb-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some USB driver fixes and new device ids for 5.15-rc3.
They include:
- usb-storage quirk additions
- usb-serial new device ids
- usb-serial driver fixes
- USB roothub registration bugfix to resolve a long-reported issue
- usb gadget driver fixes for a large number of small things
- dwc2 driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
USB: serial: option: add device id for Foxconn T99W265
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
USB: serial: cp210x: add part-number debug printk
USB: serial: cp210x: fix dropped characters with CP2102
MAINTAINERS: usb, update Peter Korsgaard's entries
usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()
usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c
Re-enable UAS for LaCie Rugged USB3-FW with fk quirk
USB: serial: option: remove duplicate USB device ID
USB: serial: mos7840: remove duplicated 0xac24 device ID
arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property
usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval
usb: gadget: f_uac2: Add missing companion descriptor for feedback EP
usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA
usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd()
xhci: Set HCD flag to defer primary roothub registration
usb: core: hcd: Add support for deferring roothub registration
usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave
usb: dwc3: core: balance phy init and exit
Revert "USB: bcma: Add a check for devm_gpiod_get"
...
Hyunchul Lee [Fri, 24 Sep 2021 15:06:16 +0000 (00:06 +0900)]
ksmbd: use LOOKUP_BENEATH to prevent the out of share access
instead of removing '..' in a given path, call
kern_path with LOOKUP_BENEATH flag to prevent
the out of share access.
ran various test on this:
smb2-cat-async smb://127.0.0.1/homes/../out_of_share
smb2-cat-async smb://127.0.0.1/homes/foo/../../out_of_share
smbclient //127.0.0.1/homes -c "mkdir ../foo2"
smbclient //127.0.0.1/homes -c "rename bar ../bar"
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Ralph Boehme <slow@samba.org> Tested-by: Steve French <smfrench@gmail.com> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, the asan-stack parameter is only passed along if
CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
be defined in Kconfig so that the value can be checked. In RISC-V's
case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
is disabled, resulting in large stack warnings with allmodconfig:
drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12: error: stack frame size (14400) exceeds limit (2048) in function 'lb035q02_connect' [-Werror,-Wframe-larger-than]
static int lb035q02_connect(struct omap_dss_device *dssdev)
^
1 error generated.
Ensure that the value of CONFIG_KASAN_STACK is always passed along to
the compiler so that these warnings do not happen when
CONFIG_KASAN_STACK is disabled.
Link: https://github.com/ClangBuiltLinux/linux/issues/1453
References: 2473089ba95e ("kasan: turn off asan-stack for clang-8 and earlier") Link: https://lkml.kernel.org/r/20210922205525.570068-1-nathan@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sh: pgtable-3level: fix cast to pointer from integer of different size
If X2TLB=y (CPU_SHX2=y or CPU_SHX3=y, e.g. migor_defconfig), pgd_t.pgd
is "unsigned long long", causing:
In file included from arch/sh/include/asm/pgtable.h:13,
from include/linux/pgtable.h:6,
from include/linux/mm.h:33,
from arch/sh/kernel/asm-offsets.c:14:
arch/sh/include/asm/pgtable-3level.h: In function `pud_pgtable':
arch/sh/include/asm/pgtable-3level.h:37:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
37 | return (pmd_t *)pud_val(pud);
| ^
Fix this by adding an intermediate cast to "unsigned long", which is
basically what the old code did before.
Link: https://lkml.kernel.org/r/2c2eef3c9a2f57e5609100a4864715ccf253d30f.1631713483.git.geert+renesas@glider.be Fixes: 465383f346561580 ("mm: rename pud_page_vaddr to pud_pgtable and make it return pmd_t *") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Daniel Palmer <daniel@thingy.jp> Acked-by: Rob Landley <rob@landley.net> Cc: Yoshinori Sato <ysato@users.osdn.me> Cc: Rich Felker <dalias@libc.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Fri, 24 Sep 2021 22:43:47 +0000 (15:43 -0700)]
mm: fs: invalidate bh_lrus for only cold path
The kernel test robot reported the regression of fio.write_iops[1] with
commit 58ed91209752 ("mm: fs: invalidate BH LRU during page migration").
Since lru_add_drain is called frequently, invalidate bh_lrus there could
increase bh_lrus cache miss ratio, which needs more IO in the end.
This patch moves the bh_lrus invalidation from the hot path( e.g.,
zap_page_range, pagevec_release) to cold path(i.e., lru_add_drain_all,
lru_cache_disable).
Zhengjun Xing confirmed
"I test the patch, the regression reduced to -2.9%"
Changbin Du [Fri, 24 Sep 2021 22:43:41 +0000 (15:43 -0700)]
tools/vm/page-types: remove dependency on opt_file for idle page tracking
Idle page tracking can also be used for process address space, not only
file mappings.
Without this change, using with '-i' option for process address space
encounters below errors reported.
$ sudo ./page-types -p $(pidof bash) -i
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
...
Fix the following build failure reported in [1] by adding a conditional
definition of EM_RISCV in order to allow cross-compilation on machines
which do not have EM_RISCV definition in their host.
scripts/sorttable.c:352:7: error: use of undeclared identifier 'EM_RISCV'
EM_RISCV was added to <elf.h> in glibc 2.24 so builds on systems with
glibc headers < 2.24 should show this error.
[mkubecek@suse.cz: changelog addition] Link: https://lore.kernel.org/lkml/e8965b25-f15b-c7b4-748c-d207dda9c8e8@i2se.com/ Link: https://lkml.kernel.org/r/20210913030625.4525-1-miles.chen@mediatek.com Fixes: 301452b85f75 ("riscv: Enable BUILDTIME_TABLE_SORT") Signed-off-by: Miles Chen <miles.chen@mediatek.com> Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Cc: Michal Kubecek <mkubecek@suse.cz> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wengang Wang [Fri, 24 Sep 2021 22:43:35 +0000 (15:43 -0700)]
ocfs2: drop acl cache for directories too
ocfs2_data_convert_worker() is currently dropping any cached acl info
for FILE before down-converting meta lock. It should also drop for
DIRECTORY. Otherwise the second acl lookup returns the cached one (from
VFS layer) which could be already stale.
The problem we are seeing is that the acl changes on one node doesn't
get refreshed on other nodes in the following case:
setfacl -m u:user1:rwX dir1
getfacl dir1 <-- see the change for user1
getfacl dir1 <-- can't see change for user1
Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Liu Yuntao [Fri, 24 Sep 2021 22:43:32 +0000 (15:43 -0700)]
mm/shmem.c: fix judgment error in shmem_is_huge()
In the case of SHMEM_HUGE_WITHIN_SIZE, the page index is not rounded up
correctly. When the page index points to the first page in a huge page,
round_up() cannot bring it to the end of the huge page, but to the end
of the previous one.
An example:
HPAGE_PMD_NR on my machine is 512(2 MB huge page size). After
allcoating a 3000 KB buffer, I access it at location 2050 KB. In
shmem_is_huge(), the corresponding index happens to be 512. After
rounded up by HPAGE_PMD_NR, it will still be 512 which is smaller than
i_size, and shmem_is_huge() will return true. As a result, my buffer
takes an additional huge page, and that shouldn't happen when
shmem_enabled is set to within_size.
Link: https://lkml.kernel.org/r/20210909032007.18353-1-liuyuntao10@huawei.com Fixes: eb3c2950d686ef ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Liu Yuntao <liuyuntao10@huawei.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: wuxu.wu <wuxu.wu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xtensa frame size is larger than the frame size for almost all other
architectures. This results in more than 50 "the frame size of <n> is
larger than 1024 bytes" errors when trying to build xtensa:allmodconfig.
Increase frame size for xtensa to 1536 bytes to avoid compile errors due
to frame size limits.
Link: https://lkml.kernel.org/r/20210912025235.3514761-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / kernel.git / log