Chuck Lever [Tue, 25 Jan 2022 21:36:22 +0000 (16:36 -0500)]
NFSD: Clamp WRITE offsets
Ensure that a client cannot specify a WRITE range that falls in a
byte range outside what the kernel's internal types (such as loff_t,
which is signed) can represent. The kiocb iterators, invoked in
nfsd_vfs_write(), should properly limit write operations to within
the underlying file system's s_maxbytes.
Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Tue, 25 Jan 2022 20:59:57 +0000 (15:59 -0500)]
NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes
iattr::ia_size is a loff_t, so these NFSv3 procedures must be
careful to deal with incoming client size values that are larger
than s64_max without corrupting the value.
Silently capping the value results in storing a different value
than the client passed in which is unexpected behavior, so remove
the min_t() check in decode_sattr3().
Note that RFC 1813 permits only the WRITE procedure to return
NFS3ERR_FBIG. We believe that NFSv3 reference implementations
also return NFS3ERR_FBIG when ia_size is too large.
Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Mon, 31 Jan 2022 18:01:53 +0000 (13:01 -0500)]
NFSD: Fix ia_size underflow
iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.
Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr().
Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Fri, 4 Feb 2022 20:19:34 +0000 (15:19 -0500)]
NFSD: Fix the behavior of READ near OFFSET_MAX
Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.
Reported-by: Dan Aloni <dan.aloni@vastdata.com> Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
o The server has not recorded an unconfirmed { v, x, c, *, * } and
has recorded a confirmed { v, x, c, *, s }. If the principals of
the record and of SETCLIENTID_CONFIRM do not match, the server
returns NFS4ERR_CLID_INUSE without removing any relevant leased
client state, and without changing recorded callback and
callback_ident values for client { x }.
The current code intends to do what the spec describes above but
it forgot to set 'old' to NULL resulting to the confirmed client
to be expired.
Fixes: 2b63482185e6 ("nfsd: fix clid_inuse on mount with security change") Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Bruce Fields <bfields@fieldses.org>
J. Bruce Fields [Tue, 18 Jan 2022 22:00:51 +0000 (17:00 -0500)]
lockd: fix failure to cleanup client locks
In my testing, we're sometimes hitting the request->fl_flags & FL_EXISTS
case in posix_lock_inode, presumably just by random luck since we're not
actually initializing fl_flags here.
This probably didn't matter before commit 7f024fcd5c97 ("Keep read and
write fds with each nlm_file") since we wouldn't previously unlock
unless we knew there were locks.
But now it causes lockd to give up on removing more locks.
We could just initialize fl_flags, but really it seems dubious to be
calling vfs_lock_file with random values in some of the fields.
Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file") Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: fixed checkpatch.pl nit ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
J. Bruce Fields [Tue, 18 Jan 2022 22:00:16 +0000 (17:00 -0500)]
lockd: fix server crash on reboot of client holding lock
I thought I was iterating over the array when actually the iteration is
over the values contained in the array?
Ugh, keep it simple.
Symptoms were a null deference in vfs_lock_file() when an NFSv3 client
that previously held a lock came back up and sent a notify.
Reported-by: Jonathan Woithe <jwoithe@just42.net> Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file") Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Sat, 8 Jan 2022 21:59:54 +0000 (16:59 -0500)]
SUNRPC: Fix sockaddr handling in svcsock_accept_class trace points
Avoid potentially hazardous memory copying and the needless use of
"%pIS" -- in the kernel, an RPC service listener is always bound to
ANYADDR. Having the network namespace is helpful when recording
errors, though.
Fixes: a0469f46faab ("SUNRPC: Replace dprintk call sites in TCP state change callouts") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Sun, 9 Jan 2022 18:26:51 +0000 (13:26 -0500)]
SUNRPC: Fix sockaddr handling in the svc_xprt_create_error trace point
While testing, I got an unexpected KASAN splat:
Jan 08 13:50:27 oracle-102.nfsv4.dev kernel: BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_svc_xprt_create_err+0x190/0x210 [sunrpc]
Jan 08 13:50:27 oracle-102.nfsv4.dev kernel: Read of size 28 at addr ffffc9000008f728 by task mount.nfs/4628
The memcpy() in the TP_fast_assign section of this trace point
copies the size of the destination buffer in order that the buffer
won't be overrun.
In other similar trace points, the source buffer for this memcpy is
a "struct sockaddr_storage" so the actual length of the source
buffer is always long enough to prevent the memcpy from reading
uninitialized or unallocated memory.
However, for this trace point, the source buffer can be as small as
a "struct sockaddr_in". For AF_INET sockaddrs, the memcpy() reads
memory that follows the source buffer, which is not always valid
memory.
To avoid copying past the end of the passed-in sockaddr, make the
source address's length available to the memcpy(). It would be a
little nicer if the tracing infrastructure was more friendly about
storing socket addresses that are not AF_INET, but I could not find
a way to make printk("%pIS") work with a dynamic array.
Reported-by: KASAN Fixes: 4b8f380e46e4 ("SUNRPC: Tracepoint to record errors in svc_xpo_create()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When file locking is enabled, everything works correctly and the
right data gets passed, but the stub declarations in linux/fs.h
did not get modified when the calling conventions changed in an
earlier patch.
Reported-by: kernel test robot <lkp@intel.com> Fixes: 7e2d8c29ecdd ("ARM: 9111/1: oabi-compat: rework fcntl64() emulation") Fixes: a75d30c77207 ("fs/locks: pass kernel struct flock to fcntl_getlk/setlk") Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
J. Bruce Fields [Wed, 5 Jan 2022 19:15:03 +0000 (14:15 -0500)]
nfsd: fix crash on COPY_NOTIFY with special stateid
RTM says "If the special ONE stateid is passed to
nfs4_preprocess_stateid_op(), it returns status=0 but does not set
*cstid. nfsd4_copy_notify() depends on stid being set if status=0, and
thus can crash if the client sends the right COPY_NOTIFY RPC."
RFC 7862 says "The cna_src_stateid MUST refer to either open or locking
states provided earlier by the server. If it is invalid, then the
operation MUST fail."
The RFC doesn't specify an error, and the choice doesn't matter much as
this is clearly illegal client behavior, but bad_stateid seems
reasonable.
Simplest is just to guarantee that nfs4_preprocess_stateid_op, called
with non-NULL cstid, errors out if it can't return a stateid.
Reported-by: rtm@csail.mit.edu Fixes: 624322f1adc5 ("NFSD add COPY_NOTIFY operation") Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Olga Kornievskaia <kolga@netapp.com> Tested-by: Olga Kornievskaia <kolga@netapp.com>
Chuck Lever [Fri, 24 Dec 2021 19:36:49 +0000 (14:36 -0500)]
NFSD: Move fill_pre_wcc() and fill_post_wcc()
These functions are related to file handle processing and have
nothing to do with XDR encoding or decoding. Also they are no longer
NFSv3-specific. As a clean-up, move their definitions to a more
appropriate location. WCC is also an NFSv3-specific term, so rename
them as general-purpose helpers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Fri, 24 Dec 2021 19:22:28 +0000 (14:22 -0500)]
Revert "nfsd: skip some unnecessary stats in the v4 case"
On the wire, I observed NFSv4 OPEN(CREATE) operations sometimes
returning a reasonable-looking value in the cinfo.before field and
zero in the cinfo.after field.
RFC 8881 Section 10.8.1 says:
> When a client is making changes to a given directory, it needs to
> determine whether there have been changes made to the directory by
> other clients. It does this by using the change attribute as
> reported before and after the directory operation in the associated
> change_info4 value returned for the operation.
and
> ... The post-operation change
> value needs to be saved as the basis for future change_info4
> comparisons.
A good quality client implementation therefore saves the zero
cinfo.after value. During a subsequent OPEN operation, it will
receive a different non-zero value in the cinfo.before field for
that directory, and it will incorrectly believe the directory has
changed, triggering an undesirable directory cache invalidation.
There are filesystem types where fs_supports_change_attribute()
returns false, tmpfs being one. On NFSv4 mounts, this means the
fh_getattr() call site in fill_pre_wcc() and fill_post_wcc() is
never invoked. Subsequently, nfsd4_change_attribute() is invoked
with an uninitialized @stat argument.
In fill_pre_wcc(), @stat contains stale stack garbage, which is
then placed on the wire. In fill_post_wcc(), ->fh_post_wc is all
zeroes, so zero is placed on the wire. Both of these values are
meaningless.
This fix can be applied immediately to stable kernels. Once there
are more regression tests in this area, this optimization can be
attempted again.
Fixes: 428a23d2bf0c ("nfsd: skip some unnecessary stats in the v4 case") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Tue, 28 Dec 2021 19:27:56 +0000 (14:27 -0500)]
NFSD: Trace boot verifier resets
According to commit bbf2f098838a ("nfsd: Reset the boot verifier on
all write I/O errors"), the Linux NFS server forces all clients to
resend pending unstable writes if any server-side write or commit
operation encounters an error (say, ENOSPC). This is a rare and
quite exceptional event that could require administrative recovery
action, so it should be made trace-able. Example trace event:
nfsd-938 [002] 7174.945558: nfsd_writeverf_reset: boot_time= 61cc920d xid=0xdcd62036 error=-28 new verifier=0x08aecc6142515904
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Thu, 30 Dec 2021 15:22:05 +0000 (10:22 -0500)]
NFSD: Rename boot verifier functions
Clean up: These functions handle what the specs call a write
verifier, which in the Linux NFS server implementation is now
divorced from the server's boot instance
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Wed, 29 Dec 2021 19:43:16 +0000 (14:43 -0500)]
NFSD: Clean up the nfsd_net::nfssvc_boot field
There are two boot-time fields in struct nfsd_net: one called
boot_time and one called nfssvc_boot. The latter is used only to
form write verifiers, but its documenting comment declares:
/* Time of server startup */
Since commit 27c438f53e79 ("nfsd: Support the server resetting the
boot verifier"), this field can be reset at any time; it's no
longer tied to server restart. So that comment is stale.
Also, according to pahole, struct timespec64 is 16 bytes long on
x86_64. The nfssvc_boot field is used only to form a write verifier,
which is 8 bytes long.
Let's clarify this situation by manufacturing an 8-byte verifier
in nfs_reset_boot_verifier() and storing only that in struct
nfsd_net.
We're grabbing 128 bits of time, so compress all of those into a
64-bit verifier instead of throwing out the high-order bits.
In the future, the siphash_key can be re-used for other hashed
objects per-nfsd_net.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Thu, 30 Dec 2021 15:26:18 +0000 (10:26 -0500)]
NFSD: Write verifier might go backwards
When vfs_iter_write() starts to fail because a file system is full,
a bunch of writes can fail at once with ENOSPC. These writes
repeatedly invoke nfsd_reset_boot_verifier() in quick succession.
Ensure that the time it grabs doesn't go backwards due to an ntp
adjustment going on at the same time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Tue, 28 Dec 2021 19:19:41 +0000 (14:19 -0500)]
NFSD: Clean up nfsd_vfs_write()
The RWF_SYNC and !RWF_SYNC arms are now exactly alike except that
the RWF_SYNC arm resets the boot verifier twice in a row. Fix that
redundancy and de-duplicate the code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Trond Myklebust [Sun, 19 Dec 2021 01:38:01 +0000 (20:38 -0500)]
nfsd: Replace use of rwsem with errseq_t
The nfsd_file nf_rwsem is currently being used to separate file write
and commit instances to ensure that we catch errors and apply them to
the correct write/commit.
We can improve scalability at the expense of a little accuracy (some
extra false positives) by replacing the nf_rwsem with more careful
use of the errseq_t mechanism to track errors across the different
operations.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: rebased on zero-verifier fix ]
Chuck Lever [Tue, 28 Dec 2021 17:35:43 +0000 (12:35 -0500)]
NFSD: Fix verifier returned in stable WRITEs
RFC 8881 explains the purpose of the write verifier this way:
> The final portion of the result is the field writeverf. This field
> is the write verifier and is a cookie that the client can use to
> determine whether a server has changed instance state (e.g., server
> restart) between a call to WRITE and a subsequent call to either
> WRITE or COMMIT.
But then it says:
> This cookie MUST be unchanged during a single instance of the
> NFSv4.1 server and MUST be unique between instances of the NFSv4.1
> server. If the cookie changes, then the client MUST assume that
> any data written with an UNSTABLE4 value for committed and an old
> writeverf in the reply has been lost and will need to be
> recovered.
RFC 1813 has similar language for NFSv3. NFSv2 does not have a write
verifier since it doesn't implement the COMMIT procedure.
Since commit 19e0663ff9bc ("nfsd: Ensure sampling of the write
verifier is atomic with the write"), the Linux NFS server has
returned a boot-time-based verifier for UNSTABLE WRITEs, but a zero
verifier for FILE_SYNC and DATA_SYNC WRITEs. FILE_SYNC and DATA_SYNC
WRITEs are not followed up with a COMMIT, so there's no need for
clients to compare verifiers for stable writes.
However, by returning a different verifier for stable and unstable
writes, the above commit puts the Linux NFS server a step farther
out of compliance with the first MUST above. At least one NFS client
(FreeBSD) noticed the difference, making this a potential
regression.
Jeff Layton [Sun, 19 Dec 2021 01:37:56 +0000 (20:37 -0500)]
nfsd: Retry once in nfsd_open on an -EOPENSTALE return
If we get back -EOPENSTALE from an NFSv4 open, then we either got some
unhandled error or the inode we got back was not the same as the one
associated with the dentry.
We really have no recourse in that situation other than to retry the
open, and if it fails to just return nfserr_stale back to the client.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Peng Tao [Sun, 19 Dec 2021 01:37:54 +0000 (20:37 -0500)]
nfsd: map EBADF
Now that we have open file cache, it is possible that another client
deletes the file and DP will not know about it. Then IO to MDS would
fail with BADSTATEID and knfsd would start state recovery, which
should fail as well and then nfs read/write will fail with EBADF.
And it triggers a WARN() in nfserrno().
Chuck Lever [Tue, 21 Dec 2021 16:52:06 +0000 (11:52 -0500)]
NFSD: Fix zero-length NFSv3 WRITEs
The Linux NFS server currently responds to a zero-length NFSv3 WRITE
request with NFS3ERR_IO. It responds to a zero-length NFSv4 WRITE
with NFS4_OK and count of zero.
RFC 1813 says of the WRITE procedure's @count argument:
count
The number of bytes of data to be written. If count is
0, the WRITE will succeed and return a count of 0,
barring errors due to permissions checking.
RFC 8881 has similar language for NFSv4, though NFSv4 removed the
explicit @count argument because that value is already contained in
the opaque payload array.
The synthetic client pynfs's WRT4 and WRT15 tests do emit zero-
length WRITEs to exercise this spec requirement. Commit fdec6114ee1f
("nfsd4: zero-length WRITE should succeed") addressed the same
problem there with the same fix.
But interestingly the Linux NFS client does not appear to emit zero-
length WRITEs, instead squelching them. I'm not aware of a test that
can generate such WRITEs for NFSv3, so I wrote a naive C program to
generate a zero-length WRITE and test this fix.
Fixes: 8154ef2776aa ("NFSD: Clean up legacy NFS WRITE argument XDR decoders") Reported-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Vasily Averin [Fri, 17 Dec 2021 06:49:39 +0000 (09:49 +0300)]
nfsd4: add refcount for nfsd4_blocked_lock
nbl allocated in nfsd4_lock can be released by a several ways:
directly in nfsd4_lock(), via nfs4_laundromat(), via another nfs
command RELEASE_LOCKOWNER or via nfsd4_callback.
This structure should be refcounted to be used and released correctly
in all these cases.
Refcount is initialized to 1 during allocation and is incremented
when nbl is added into nbl_list/nbl_lru lists.
Usually nbl is linked into both lists together, so only one refcount
is used for both lists.
However nfsd4_lock() should keep in mind that nbl can be present
in one of lists only. This can happen if nbl was handled already
by nfs4_laundromat/nfsd4_callback/etc.
Refcount is decremented if vfs_lock_file() returns FILE_LOCK_DEFERRED,
because nbl can be handled already by nfs4_laundromat/nfsd4_callback/etc.
Refcount is not changed in find_blocked_lock() because of it reuses counter
released after removing nbl from lists.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
J. Bruce Fields [Thu, 16 Dec 2021 17:20:13 +0000 (12:20 -0500)]
nfs: block notification on fs with its own ->lock
NFSv4.1 supports an optional lock notification feature which notifies
the client when a lock comes available. (Normally NFSv4 clients just
poll for locks if necessary.) To make that work, we need to request a
blocking lock from the filesystem.
We turned that off for NFS in commit f657f8eef3ff ("nfs: don't atempt
blocking locks on nfs reexports") [sic] because it actually blocks the
nfsd thread while waiting for the lock.
Thanks to Vasily Averin for pointing out that NFS isn't the only
filesystem with that problem.
Any filesystem that leaves ->lock NULL will use posix_lock_file(), which
does the right thing. Simplest is just to assume that any filesystem
that defines its own ->lock is not safe to request a blocking lock from.
So, this patch mostly reverts commit f657f8eef3ff ("nfs: don't atempt
blocking locks on nfs reexports") [sic] and commit b840be2f00c0 ("lockd:
don't attempt blocking locks on nfs reexports"), and instead uses a
check of ->lock (Vasily's suggestion) to decide whether to support
blocking lock notifications on a given filesystem. Also add a little
documentation.
Perhaps someday we could add back an export flag later to allow
filesystems with "good" ->lock methods to support blocking lock
notifications.
Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: Description rewritten to address checkpatch nits ]
[ cel: Fixed warning when SUNRPC debugging is disabled ]
[ cel: Fixed NULL check ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
The use of the bitmaps is confusing. Add a cross-reference to make it
easier to find the existing comment. Add an updated reference with URL
to make it quicker to look up. And a bit more editorializing about the
value of this.
Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Thu, 21 Oct 2021 16:11:45 +0000 (12:11 -0400)]
NFSD: Combine XDR error tracepoints
Clean up: The garbage_args and cant_encode tracepoints report the
same information as each other, so combine them into a single
tracepoint class to reduce code duplication and slightly reduce the
size of trace.o.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Tue, 19 Oct 2021 19:17:21 +0000 (15:17 -0400)]
SUNRPC: Remove low signal-to-noise tracepoints
I'm about to add more information to the server-side SUNRPC
tracepoints, so I'm going to offset the increased trace log
consumption by getting rid of some tracepoints that fire frequently
but don't offer much value.
trace_svc_xprt_received() was useful for debugging, perhaps, but
is not generally informative.
trace_svc_handle_xprt() reports largely the same information as
trace_svc_xdr_recvfrom().
As a clean-up, rename trace_svc_xprt_do_enqueue() to match
svc_xprt_dequeue().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Tue, 30 Nov 2021 23:58:14 +0000 (10:58 +1100)]
NFSD: simplify per-net file cache management
We currently have a 'laundrette' for closing cached files - a different
work-item for each network-namespace.
These 'laundrettes' (aka struct nfsd_fcache_disposal) are currently on a
list, and are freed using rcu.
The list is not necessary as we have a per-namespace structure (struct
nfsd_net) which can hold a link to the nfsd_fcache_disposal.
The use of kfree_rcu is also unnecessary as the cache is cleaned of all
files associated with a given namespace, and no new files can be added,
before the nfsd_fcache_disposal is freed.
So add a '->fcache_disposal' link to nfsd_net, and discard the list
management and rcu usage.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Thu, 30 Sep 2021 23:10:03 +0000 (19:10 -0400)]
NFSD: Remove be32_to_cpu() from DRC hash function
Commit 7142b98d9fd7 ("nfsd: Clean up drc cache in preparation for
global spinlock elimination"), billed as a clean-up, added
be32_to_cpu() to the DRC hash function without explanation. That
commit removed two comments that state that byte-swapping in the
hash function is unnecessary without explaining whether there was
a need for that change.
On some Intel CPUs, the swab32 instruction is known to cause a CPU
pipeline stall. be32_to_cpu() does not add extra randomness, since
the hash multiplication is done /before/ shifting to the high-order
bits of the result.
As a micro-optimization, remove the unnecessary transform from the
DRC hash function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
NFS: switch the callback service back to non-pooled.
Now that thread management is consistent there is no need for
nfs-callback to use svc_create_pooled() as introduced in Commit df807fffaabd ("NFSv4.x/callback: Create the callback service through
svc_create_pooled"). So switch back to svc_create().
If service pools were configured, but the number of threads were left at
'1', nfs callback may not work reliably when svc_create_pooled() is used.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
lockd: use svc_set_num_threads() for thread start and stop
svc_set_num_threads() does everything that lockd_start_svc() does, except
set sv_maxconn. It also (when passed 0) finds the threads and
stops them with kthread_stop().
So move the setting for sv_maxconn, and use svc_set_num_thread()
We now don't need nlmsvc_task.
Now that we use svc_set_num_threads() it makes sense to set svo_module.
This request that the thread exists with module_put_and_exit().
Also fix the documentation for svo_module to make this explicit.
svc_prepare_thread is now only used where it is defined, so it can be
made static.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
SUNRPC: always treat sv_nrpools==1 as "not pooled"
Currently 'pooled' services hold a reference on the pool_map, and
'unpooled' services do not.
svc_destroy() uses the presence of ->svo_function (via
svc_serv_is_pooled()) to determine if the reference should be dropped.
There is no direct correlation between being pooled and the use of
svo_function, though in practice, lockd is the only non-pooled service,
and the only one not to use svo_function.
This is untidy and would cause problems if we changed lockd to use
svc_set_num_threads(), which requires the use of ->svo_function.
So change the test for "is the service pooled" to "is sv_nrpools > 1".
This means that when svc_pool_map_get() returns 1, it must NOT take a
reference to the pool.
We discard svc_serv_is_pooled(), and test sv_nrpools directly.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
SUNRPC: move the pool_map definitions (back) into svc.c
These definitions are not used outside of svc.c, and there is no
evidence that they ever have been. So move them into svc.c
and make the declarations 'static'.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
lockd: introduce lockd_put()
There is some cleanup that is duplicated in lockd_down() and the failure
path of lockd_up().
Factor these out into a new lockd_put() and call it from both places.
lockd_put() does *not* take the mutex - that must be held by the caller.
It decrements nlmsvc_users and if that reaches zero, it cleans up.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
lockd: move lockd_start_svc() call into lockd_create_svc()
lockd_start_svc() only needs to be called once, just after the svc is
created. If the start fails, the svc is discarded too.
It thus makes sense to call lockd_start_svc() from lockd_create_svc().
This allows us to remove the test against nlmsvc_rqst at the start of
lockd_start_svc() - it must always be NULL.
lockd_up() only held an extra reference on the svc until a thread was
created - then it dropped it. The thread - and thus the extra reference
- will remain until kthread_stop() is called.
Now that the thread is created in lockd_create_svc(), the extra
reference can be dropped there. So the 'serv' variable is no longer
needed in lockd_up().
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
lockd: simplify management of network status notifiers
Now that the network status notifiers use nlmsvc_serv rather then
nlmsvc_rqst the management can be simplified.
Notifier unregistration synchronises with any pending notifications so
providing we unregister before nlm_serv is freed no further interlock
is required.
So we move the unregister call to just before the thread is killed
(which destroys the service) and just before the service is destroyed in
the failure-path of lockd_up().
Then nlm_ntf_refcnt and nlm_ntf_wq can be removed.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
lockd: introduce nlmsvc_serv
lockd has two globals - nlmsvc_task and nlmsvc_rqst - but mostly it
wants the 'struct svc_serv', and when it doesn't want it exactly it can
get to what it wants from the serv.
This patch is a first step to removing nlmsvc_task and nlmsvc_rqst. It
introduces nlmsvc_serv to store the 'struct svc_serv*'. This is set as
soon as the serv is created, and cleared only when it is destroyed.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
NFSD: simplify locking for network notifier.
nfsd currently maintains an open-coded read/write semaphore (refcount
and wait queue) for each network namespace to ensure the nfs service
isn't shut down while the notifier is running.
This is excessive. As there is unlikely to be contention between
notifiers and they run without sleeping, a single spinlock is sufficient
to avoid problems.
Signed-off-by: NeilBrown <neilb@suse.de>
[ cel: ensure nfsd_notifier_lock is static ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
SUNRPC: discard svo_setup and rename svc_set_num_threads_sync()
The ->svo_setup callback serves no purpose. It is always called from
within the same module that chooses which callback is needed. So
discard it and call the relevant function directly.
Now that svc_set_num_threads() is no longer used remove it and rename
svc_set_num_threads_sync() to remove the "_sync" suffix.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
NFSD: Make it possible to use svc_set_num_threads_sync
nfsd cannot currently use svc_set_num_threads_sync. It instead
uses svc_set_num_threads which does *not* wait for threads to all
exit, and has a separate mechanism (nfsd_shutdown_complete) to wait
for completion.
The reason that nfsd is unlike other services is that nfsd threads can
exit separately from svc_set_num_threads being called - they die on
receipt of SIGKILL. Also, when the last thread exits, the service must
be shut down (sockets closed).
For this, the nfsd_mutex needs to be taken, and as that mutex needs to
be held while svc_set_num_threads is called, the one cannot wait for
the other.
This patch changes the nfsd thread so that it can drop the ref on the
service without blocking on nfsd_mutex, so that svc_set_num_threads_sync
can be used:
- if it can drop a non-last reference, it does that. This does not
trigger shutdown and does not require a mutex. This will likely
happen for all but the last thread signalled, and for all threads
being shut down by nfsd_shutdown_threads()
- if it can get the mutex without blocking (trylock), it does that
and then drops the reference. This will likely happen for the
last thread killed by SIGKILL
- Otherwise there might be an unrelated task holding the mutex,
possibly in another network namespace, or nfsd_shutdown_threads()
might be just about to get a reference on the service, after which
we can drop ours safely.
We cannot conveniently get wakeup notifications on these events,
and we are unlikely to need to, so we sleep briefly and check again.
With this we can discard nfsd_shutdown_complete and
nfsd_complete_shutdown(), and switch to svc_set_num_threads_sync.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
NFSD: narrow nfsd_mutex protection in nfsd thread
There is nothing happening in the start of nfsd() that requires
protection by the mutex, so don't take it until shutting down the thread
- which does still require protection - but only for nfsd_put().
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
SUNRPC: use sv_lock to protect updates to sv_nrthreads.
Using sv_lock means we don't need to hold the service mutex over these
updates.
In particular, svc_exit_thread() no longer requires synchronisation, so
threads can exit asynchronously.
Note that we could use an atomic_t, but as there are many more read
sites than writes, that would add unnecessary noise to the code.
Some reads are already racy, and there is no need for them to not be.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
SUNRPC: stop using ->sv_nrthreads as a refcount
The use of sv_nrthreads as a general refcount results in clumsy code, as
is seen by various comments needed to explain the situation.
This patch introduces a 'struct kref' and uses that for reference
counting, leaving sv_nrthreads to be a pure count of threads. The kref
is managed particularly in svc_get() and svc_put(), and also nfsd_put();
svc_destroy() now takes a pointer to the embedded kref, rather than to
the serv.
nfsd allows the svc_serv to exist with ->sv_nrhtreads being zero. This
happens when a transport is created before the first thread is started.
To support this, a 'keep_active' flag is introduced which holds a ref on
the svc_serv. This is set when any listening socket is successfully
added (unless there are running threads), and cleared when the number of
threads is set. So when the last thread exits, the nfs_serv will be
destroyed.
The use of 'keep_active' replaces previous code which checked if there
were any permanent sockets.
We no longer clear ->rq_server when nfsd() exits. This was done
to prevent svc_exit_thread() from calling svc_destroy().
Instead we take an extra reference to the svc_serv to prevent
svc_destroy() from being called.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
SUNRPC/NFSD: clean up get/put functions.
svc_destroy() is poorly named - it doesn't necessarily destroy the svc,
it might just reduce the ref count.
nfsd_destroy() is poorly named for the same reason.
This patch:
- removes the refcount functionality from svc_destroy(), moving it to
a new svc_put(). Almost all previous callers of svc_destroy() now
call svc_put().
- renames nfsd_destroy() to nfsd_put() and improves the code, using
the new svc_destroy() rather than svc_put()
- removes a few comments that explain the important for balanced
get/put calls. This should be obvious.
The only non-trivial part of this is that svc_destroy() would call
svc_sock_update() on a non-final decrement. It can no longer do that,
and svc_put() isn't really a good place of it. This call is now made
from svc_exit_thread() which seems like a good place. This makes the
call *before* sv_nrthreads is decremented rather than after. This
is not particularly important as the call just sets a flag which
causes sv_nrthreads set be checked later. A subsequent patch will
improve the ordering.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
SUNRPC: change svc_get() to return the svc.
It is common for 'get' functions to return the object that was 'got',
and there are a couple of places where users of svc_get() would be a
little simpler if svc_get() did that.
Make it so.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 29 Nov 2021 04:51:25 +0000 (15:51 +1100)]
NFSD: handle errors better in write_ports_addfd()
If write_ports_add() fails, we shouldn't destroy the serv, unless we had
only just created it. So if there are any permanent sockets already
attached, leave the serv in place.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Wed, 13 Oct 2021 20:44:20 +0000 (16:44 -0400)]
NFSD: Fix sparse warning
/home/cel/src/linux/linux/fs/nfsd/nfs4proc.c:1539:24: warning: incorrect type in assignment (different base types)
/home/cel/src/linux/linux/fs/nfsd/nfs4proc.c:1539:24: expected restricted __be32 [usertype] status
/home/cel/src/linux/linux/fs/nfsd/nfs4proc.c:1539:24: got int
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Linus Torvalds [Sun, 12 Dec 2021 18:20:57 +0000 (10:20 -0800)]
Merge tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.16-rc5. They include:
- gadget driver fixes for reported issues
- xhci fixes for reported problems.
- config endpoint parsing fixes for where we got bitfields wrong
Most of these have been in linux-next, the remaining few were not, but
got lots of local testing in my systems and in some cloud testing
infrastructures"
* tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: core: config: using bit mask instead of individual bits
usb: core: config: fix validation of wMaxPacketValue entries
USB: gadget: zero allocate endpoint 0 buffers
USB: gadget: detect too-big endpoint 0 requests
xhci: avoid race between disable slot command and host runtime suspend
xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending
Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"
Linus Torvalds [Sun, 12 Dec 2021 18:07:50 +0000 (10:07 -0800)]
Merge tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for clock chip drivers:
- A regression fix for the Designware APB timer. A recent change to
the error checking code transformed the error condition wrongly so
it turned into a fail if good condition.
- Fix a clang build fail of the ARM architected timer driver"
* tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/arm_arch_timer: Force inlining of erratum_set_next_event_generic()
clocksource/drivers/dw_apb_timer_of: Fix probe failure
Linus Torvalds [Sun, 12 Dec 2021 17:53:12 +0000 (09:53 -0800)]
Merge tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of interrupt chip driver fixes:
- Fix the multi vector MSI allocation on Armada 370XP
- Do interrupt acknowledgement correctly in the aspeed-scu driver
- Make the IPR register offset correct in the NVIC driver
- Make redistribution table flushing correct by issueing a SYNC
command to ensure that the invalidation command has been executed
- Plug a device tree node reference leak in the bcm7210-l2 driver
- Trivial fixes in the MIPS GIC and the Apple AIC drivers"
* tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-bcm7120-l2: Add put_device() after of_find_device_by_node()
irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL
irqchip/apple-aic: Mark aic_init_smp() as __init
irqchip: nvic: Fix offset for Interrupt Priority Offsets
irqchip/mips-gic: Use bitfield helpers
irqchip/aspeed-scu: Replace update_bits with write_bits.
irqchip/armada-370-xp: Fix support for Multi-MSI interrupts
irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()
Linus Torvalds [Sun, 12 Dec 2021 17:38:04 +0000 (09:38 -0800)]
Merge tag 'sched-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single fix for the x86 scheduler topology:
Using cluster topology on hybrid CPUs, e.g. Alder Lake, biases the
scheduler towards the ATOM cluster as that has more total capacity.
Use selection based on CPU priority instead"
* tag 'sched-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched,x86: Don't use cluster topology for x86 hybrid CPUs
Pavel Hofman [Fri, 10 Dec 2021 08:52:18 +0000 (09:52 +0100)]
usb: core: config: fix validation of wMaxPacketValue entries
The checks performed by commit aed9d65ac327 ("USB: validate
wMaxPacketValue entries in endpoint descriptors") require that initial
value of the maxp variable contains both maximum packet size bits
(10..0) and multiple-transactions bits (12..11). However, the existing
code assings only the maximum packet size bits. This patch assigns all
bits of wMaxPacketSize to the variable.
Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under some conditions, USB gadget devices can show allocated buffer
contents to a host. Fix this up by zero-allocating them so that any
extra data will all just be zeros.
Sometimes USB hosts can ask for buffers that are too large from endpoint
0, which should not be allowed. If this happens for OUT requests, stall
the endpoint, but for IN requests, trim the request size to the endpoint
buffer size.
Linus Torvalds [Sun, 12 Dec 2021 00:28:27 +0000 (16:28 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers.
Three are small and obvious, the qedi one is a bit larger but also
pretty obvious"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Format log strings only if needed
scsi: scsi_debug: Fix buffer size of REPORT ZONES command
scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issue
scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()
Linus Torvalds [Sun, 12 Dec 2021 00:21:06 +0000 (16:21 -0800)]
Merge tag 'xfs-5.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"This fixes a race between a readonly remount process and other
processes that hold a file IOLOCK on files that previously experienced
copy on write, that could result in severe filesystem corruption if
the filesystem is then remounted rw.
I think this is fairly rare (since the only reliable reproducer I have
that fits the second criteria is the experimental xfs_scrub program),
but the race is clear, so we still need to fix this.
Summary:
- Fix a data corruption vector that can result from the ro remount
process failing to clear all speculative preallocations from files
and the rw remount process not noticing the incomplete cleanup"
* tag 'xfs-5.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove all COW fork extents when remounting readonly
Linus Torvalds [Sun, 12 Dec 2021 00:14:17 +0000 (16:14 -0800)]
Merge branch 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fixes from Dennis Zhou:
"This contains a fix for SMP && !MMU archs for percpu which has been
tested by arm and sh. It seems in the past they have gotten away with
it due to mapping of vm functions to km functions, but this fell apart
a few releases ago and was just reported recently.
The other is just a minor dependency clean up.
I think queued up right now by Andrew is a fix in percpu that papers
of what seems to be a bug in hotplug for a special situation with
memoryless nodes. Michal Hocko is digging into it further"
* 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu_ref: Replace kernel.h with the necessary inclusions
percpu: km: ensure it is used with NOMMU (either UP or SMP)
Linus Torvalds [Sat, 11 Dec 2021 21:28:02 +0000 (13:28 -0800)]
Merge tag 'perf-tools-fixes-for-v5.16-2021-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Prevent out-of-bounds access to per sample registers.
- Fix NULL vs IS_ERR_OR_NULL() checking on the python binding.
- Intel PT fixes, half of those are one-liners:
- Fix some PGE (packet generation enable/control flow packets) usage.
- Fix sync state when a PSB (synchronization) packet is found.
- Fix intel_pt_fup_event() assumptions about setting state type.
- Fix state setting when receiving overflow (OVF) packet.
- Fix next 'err' value, walking trace.
- Fix missing 'instruction' events with 'q' option.
- Fix error timestamp setting on the decoder error path.
* tag 'perf-tools-fixes-for-v5.16-2021-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Fix NULL vs IS_ERR_OR_NULL() checking
perf intel-pt: Fix error timestamp setting on the decoder error path
perf intel-pt: Fix missing 'instruction' events with 'q' option
perf intel-pt: Fix next 'err' value, walking trace
perf intel-pt: Fix state setting when receiving overflow (OVF) packet
perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type
perf intel-pt: Fix sync state when a PSB (synchronization) packet is found
perf intel-pt: Fix some PGE (packet generation enable/control flow packets) usage
perf tools: Prevent out-of-bounds access to registers
Linus Torvalds [Sat, 11 Dec 2021 17:25:07 +0000 (09:25 -0800)]
Merge tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few block fixes that should go into this release:
- NVMe pull request:
- set ana_log_size to 0 after freeing ana_log_buf (Hou Tao)
- show subsys nqn for duplicate cntlids (Keith Busch)
- disable namespace access for unsupported metadata (Keith
Busch)
- report write pointer for a full zone as zone start + zone len
(Niklas Cassel)
- fix use after free when disconnecting a reconnecting ctrl
(Ruozhu Li)
- fix a list corruption in nvmet-tcp (Sagi Grimberg)
- Fix for a regression on DIO single bio async IO (Pavel)
- ioprio seteuid fix (Davidlohr)
- mtd fix that subsequently got reverted as it was broken, will get
re-done and submitted for the next round
- Two MD fixes via Song (Markus, zhangyue)"
* tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-block:
Revert "mtd_blkdevs: don't scan partitions for plain mtdblock"
block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)
md: fix double free of mddev->private in autorun_array()
md: fix update super 1.0 on rdev size change
nvmet-tcp: fix possible list corruption for unexpected command failure
block: fix single bio async DIO error handling
nvme: fix use after free when disconnecting a reconnecting ctrl
nvme-multipath: set ana_log_size to 0 after free ana_log_buf
mtd_blkdevs: don't scan partitions for plain mtdblock
nvme: report write pointer for a full zone as zone start + zone len
nvme: disable namespace access for unsupported metadata
nvme: show subsys nqn for duplicate cntlids
Linus Torvalds [Sat, 11 Dec 2021 17:19:44 +0000 (09:19 -0800)]
Merge tag 'io_uring-5.16-2021-12-10' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that are all bound for stable:
- Two syzbot reports for io-wq that turned out to be separate fixes,
but ultimately very closely related
- io_uring task_work running on cancelations"
* tag 'io_uring-5.16-2021-12-10' of git://git.kernel.dk/linux-block:
io-wq: check for wq exit after adding new worker task_work
io_uring: ensure task_work gets run as part of cancelations
io-wq: remove spurious bit clear on task_work addition
Linus Torvalds [Sat, 11 Dec 2021 17:06:08 +0000 (09:06 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Fix qcom mux logic to look at the proper parent table member. Luckily
this clk type isn't very common.
- Don't kill clks on qcom systems that use Trion PLLs that are enabled
out of the bootloader. We will simply skip programming the PLL rate
if it's already done.
- Use the proper clk_ops for the qcom sm6125 ICE clks.
- Use module_platform_driver() in i.MX as it can be a module.
- Fix a UAF in the versatile clk driver on an error path.
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: versatile: clk-icst: use after free on error path
clk: qcom: sm6125-gcc: Swap ops of ice and apps on sdcc1
clk: imx: use module_platform_driver
clk: qcom: clk-alpha-pll: Don't reconfigure running Trion
clk: qcom: regmap-mux: fix parent clock lookup
Linus Torvalds [Sat, 11 Dec 2021 16:58:04 +0000 (08:58 -0800)]
Merge tag 'devicetree-fixes-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Revert schema checks on %.dtb targets. This was problematic for some
external build tools.
- A few DT binding example fixes
- Add back dropped 'enet-phy-lane-no-swap' Ethernet PHY property
- Drop erroneous if/then schema in nxp,imx7-mipi-csi2
- Add a quirk to fix some interrupt controllers use of 'interrupt-map'
* tag 'devicetree-fixes-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
Revert "kbuild: Enable DT schema checks for %.dtb targets"
dt-bindings: bq25980: Fixup the example
dt-bindings: input: gpio-keys: Fix interrupts in example
dt-bindings: net: Reintroduce PHY no lane swap binding
dt-bindings: media: nxp,imx7-mipi-csi2: Drop bad if/then schema
of/irq: Add a quirk for controllers with their own definition of interrupt-map
dt-bindings: iio: adc: exynos-adc: Fix node name in example
Linus Torvalds [Sat, 11 Dec 2021 16:46:52 +0000 (08:46 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"21 patches.
Subsystems affected by this patch series: MAINTAINERS, mailmap, and mm
(mlock, pagecache, damon, slub, memcg, hugetlb, and pagecache)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits)
mm: bdi: initialize bdi_min_ratio when bdi is unregistered
hugetlbfs: fix issue of preallocation of gigantic pages can't work
mm/memcg: relocate mod_objcg_mlstate(), get_obj_stock() and put_obj_stock()
mm/slub: fix endianness bug for alloc/free_traces attributes
selftests/damon: split test cases
selftests/damon: test debugfs file reads/writes with huge count
selftests/damon: test wrong DAMOS condition ranges input
selftests/damon: test DAMON enabling with empty target_ids case
selftests/damon: skip test if DAMON is running
mm/damon/vaddr-test: remove unnecessary variables
mm/damon/vaddr-test: split a test function having >1024 bytes frame size
mm/damon/vaddr: remove an unnecessary warning message
mm/damon/core: remove unnecessary error messages
mm/damon/dbgfs: remove an unnecessary error message
mm/damon/core: use better timer mechanisms selection threshold
mm/damon/core: fix fake load reports due to uninterruptible sleeps
timers: implement usleep_idle_range()
filemap: remove PageHWPoison check from next_uptodate_page()
mailmap: update email address for Guo Ren
MAINTAINERS: update kdump maintainers
...
Thomas Gleixner [Sat, 11 Dec 2021 12:56:30 +0000 (13:56 +0100)]
Merge tag 'timers-v5.16-rc4' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull timer fixes from Daniel Lezcano:
- Fix build error with clang and some kernel configuration on the
arm64 architected timer by inlining the
erratum_set_next_event_generic() function (Marc Zyngier)
- Fix probe error on the dw_apb_timer_of driver by fixing the
incorrect condition previously introduced (Alexey Sheplyakov)
Miaoqian Lin [Sat, 11 Dec 2021 05:38:53 +0000 (05:38 +0000)]
perf python: Fix NULL vs IS_ERR_OR_NULL() checking
The function trace_event__tp_format_id may return ERR_PTR(-ENOMEM). Use
IS_ERR_OR_NULL to check tp_format.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Link: http://lore.kernel.org/lkml/20211211053856.19827-1-linmq006@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 10 Dec 2021 16:23:02 +0000 (18:23 +0200)]
perf intel-pt: Fix missing 'instruction' events with 'q' option
FUP packets contain IP information, which makes them also an 'instruction'
event in 'hop' mode i.e. the itrace 'q' option. That wasn't happening, so
restructure the logic so that FUP events are added along with appropriate
'instruction' and 'branch' events.
Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v5.15+ Link: https://lore.kernel.org/r/20211210162303.2288710-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 10 Dec 2021 16:23:00 +0000 (18:23 +0200)]
perf intel-pt: Fix state setting when receiving overflow (OVF) packet
An overflow (OVF packet) is treated as an error because it represents a
loss of trace data, but there is no loss of synchronization, so the packet
state should be INTEL_PT_STATE_IN_SYNC not INTEL_PT_STATE_ERR_RESYNC.
To support that, some additional variables must be reset, and the FUP
packet that may follow OVF is treated as an FUP event.
Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v5.15+ Link: https://lore.kernel.org/r/20211210162303.2288710-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 10 Dec 2021 16:22:59 +0000 (18:22 +0200)]
perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type
intel_pt_fup_event() assumes it can overwrite the state type if there has
been an FUP event, but this is an unnecessary and unexpected constraint on
callers.
Fix by touching only the state type flags that are affected by an FUP
event.
Fixes: a472e65fc490a ("perf intel-pt: Add decoder support for ptwrite and power event packets") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v5.15+ Link: https://lore.kernel.org/r/20211210162303.2288710-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 10 Dec 2021 16:22:58 +0000 (18:22 +0200)]
perf intel-pt: Fix sync state when a PSB (synchronization) packet is found
When syncing, it may be that branch packet generation is not enabled at
that point, in which case there will not immediately be a control-flow
packet, so some packets before a control flow packet turns up, get
ignored. However, the decoder is in sync as soon as a PSB is found, so
the state should be set accordingly.
Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v5.15+ Link: https://lore.kernel.org/r/20211210162303.2288710-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Wed, 1 Dec 2021 12:33:29 +0000 (12:33 +0000)]
perf tools: Prevent out-of-bounds access to registers
The size of the cache of register values is arch-dependant
(PERF_REGS_MAX). This has the potential of causing an out-of-bounds
access in the function "perf_reg_value" if the local architecture
contains less registers than the one the perf.data file was recorded on.
Since the maximum number of registers is bound by the bitmask "u64
cache_mask", and the size of the cache when running under x86 systems is
64 already, fix the size to 64 and add a range-check to the function
"perf_reg_value" to prevent out-of-bounds access.
Reported-by: Alexandre Truong <alexandre.truong@arm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-csky@vger.kernel.org Cc: linux-riscv@lists.infradead.org Link: https://lore.kernel.org/r/20211201123334.679131-2-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 11 Dec 2021 01:28:02 +0000 (17:28 -0800)]
Merge tag 'for-5.16-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more regression fixes and stable patches, mostly one-liners.
Regression fixes:
- fix pointer/ERR_PTR mismatch returned from memdup_user
- reset dedicated zoned mode relocation block group to avoid using it
and filling it without any recourse
Fixes:
- handle a case to FITRIM range (also to make fstests/generic/260
work)
- fix warning when extent buffer state and pages get out of sync
after an IO error
- fix transaction abort when syncing due to missing mapping error set
on metadata inode after inlining a compressed file
- fix transaction abort due to tree-log and zoned mode interacting in
an unexpected way
- fix memory leak of additional extent data when qgroup reservation
fails
- do proper handling of slot search call when deleting root refs"
* tag 'for-5.16-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling
btrfs: zoned: clear data relocation bg on zone finish
btrfs: free exchange changeset on failures
btrfs: fix re-dirty process of tree-log nodes
btrfs: call mapping_set_error() on btree inode with a write error
btrfs: clear extent buffer uptodate when we fail to write it
btrfs: fail if fstrim_range->start == U64_MAX
btrfs: fix error pointer dereference in btrfs_ioctl_rm_dev_v2()
Linus Torvalds [Sat, 11 Dec 2021 01:24:57 +0000 (17:24 -0800)]
Merge tag '5.16-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two cifs/smb3 fixes - one for stable, the other fixes a recently
reported NTLMSSP auth problem"
* tag '5.16-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix ntlmssp auth when there is no key exchange
cifs: Fix crash on unload of cifs_arc4.ko
Manjong Lee [Fri, 10 Dec 2021 22:47:11 +0000 (14:47 -0800)]
mm: bdi: initialize bdi_min_ratio when bdi is unregistered
Initialize min_ratio if it is set during bdi unregistration. This can
prevent problems that may occur a when bdi is removed without resetting
min_ratio.
For example.
1) insert external sdcard
2) set external sdcard's min_ratio 70
3) remove external sdcard without setting min_ratio 0
4) insert external sdcard
5) set external sdcard's min_ratio 70 << error occur(can't set)
Because when an sdcard is removed, the present bdi_min_ratio value will
remain. Currently, the only way to reset bdi_min_ratio is to reboot.
[akpm@linux-foundation.org: tweak comment and coding style]
Link: https://lkml.kernel.org/r/20211021161942.5983-1-mj0123.lee@samsung.com Signed-off-by: Manjong Lee <mj0123.lee@samsung.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Changheun Lee <nanich.lee@samsung.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: <seunghwan.hyun@samsung.com> Cc: <sookwan7.kim@samsung.com> Cc: <yt0928.kim@samsung.com> Cc: <junho89.kim@samsung.com> Cc: <jisoo2146.oh@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhenguo Yao [Fri, 10 Dec 2021 22:47:08 +0000 (14:47 -0800)]
hugetlbfs: fix issue of preallocation of gigantic pages can't work
Preallocation of gigantic pages can't work bacause of commit b5389086ad7b ("hugetlbfs: extend the definition of hugepages parameter
to support node allocation"). When nid is NUMA_NO_NODE(-1),
alloc_bootmem_huge_page will always return without doing allocation.
Fix this by adding more check.
Link: https://lkml.kernel.org/r/20211129133803.15653-1-yaozhenguo1@gmail.com Fixes: b5389086ad7b ("hugetlbfs: extend the definition of hugepages parameter to support node allocation") Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Fri, 10 Dec 2021 22:47:05 +0000 (14:47 -0800)]
mm/memcg: relocate mod_objcg_mlstate(), get_obj_stock() and put_obj_stock()
All the calls to mod_objcg_mlstate(), get_obj_stock() and
put_obj_stock() are done by functions defined within the same "#ifdef
CONFIG_MEMCG_KMEM" compilation block. When CONFIG_MEMCG_KMEM isn't
defined, the following compilation warnings will be issued [1] and [2].
mm/memcontrol.c:785:20: warning: unused function 'mod_objcg_mlstate'
mm/memcontrol.c:2113:33: warning: unused function 'get_obj_stock'
Fix these warning by moving those functions to under the same
CONFIG_MEMCG_KMEM compilation block. There is no functional change.
Gerald Schaefer [Fri, 10 Dec 2021 22:47:02 +0000 (14:47 -0800)]
mm/slub: fix endianness bug for alloc/free_traces attributes
On big-endian s390, the alloc/free_traces attributes produce endless
output, because of always 0 idx in slab_debugfs_show().
idx is de-referenced from *v, which points to a loff_t value, with
unsigned int idx = *(unsigned int *)v;
This will only give the upper 32 bits on big-endian, which remain 0.
Instead of only fixing this de-reference, during discussion it seemed
more appropriate to change the seq_ops so that they use an explicit
iterator in private loc_track struct.
This patch adds idx to loc_track, which will also fix the endianness
bug.
Link: https://lore.kernel.org/r/20211117193932.4049412-1-gerald.schaefer@linux.ibm.com Link: https://lkml.kernel.org/r/20211126171848.17534-1-gerald.schaefer@linux.ibm.com Fixes: 64dd68497be7 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs") Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reported-by: Steffen Maier <maier@linux.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SeongJae Park [Fri, 10 Dec 2021 22:46:59 +0000 (14:46 -0800)]
selftests/damon: split test cases
Currently, the single test program, debugfs.sh, contains all test cases
for DAMON. When one of the cases fails, finding which case is failed
from the test log is not so easy, and all remaining tests will be
skipped. To improve the situation, this commit splits the single
program into small test programs having their own names.
SeongJae Park [Fri, 10 Dec 2021 22:46:55 +0000 (14:46 -0800)]
selftests/damon: test debugfs file reads/writes with huge count
DAMON debugfs interface users were able to trigger warning by writing
some files with arbitrarily large 'count' parameter. The issue is fixed
with commit db7a347b26fe ("mm/damon/dbgfs: use '__GFP_NOWARN' for
user-specified size buffer allocation"). This commit adds a test case
for the issue in DAMON selftests to avoid future regressions.
SeongJae Park [Fri, 10 Dec 2021 22:46:52 +0000 (14:46 -0800)]
selftests/damon: test wrong DAMOS condition ranges input
A patch titled "mm/damon/schemes: add the validity judgment of
thresholds"[1] makes DAMON debugfs interface to validate DAMON scheme
inputs. This commit adds a test case for the validation logic in DAMON
selftests.
projects / kernel.git / log