kernel.git
5 years agotcp: increase tcp_max_syn_backlog max value
Eric Dumazet [Wed, 30 Oct 2019 17:05:46 +0000 (10:05 -0700)]
tcp: increase tcp_max_syn_backlog max value

tcp_max_syn_backlog default value depends on memory size
and TCP ehash size. Before this patch, the max value
was 2048 [1], which is considered too small nowadays.

Increase it to 4096 to match the recent SOMAXCONN change.

[1] This is with TCP ehash size being capped to 524288 buckets.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: increase SOMAXCONN to 4096
Eric Dumazet [Wed, 30 Oct 2019 16:36:20 +0000 (09:36 -0700)]
net: increase SOMAXCONN to 4096

SOMAXCONN is /proc/sys/net/core/somaxconn default value.

It has been defined as 128 more than 20 years ago.

Since it caps the listen() backlog values, the very small value has
caused numerous problems over the years, and many people had
to raise it on their hosts after beeing hit by problems.

Google has been using 1024 for at least 15 years, and we increased
this to 4096 after TCP listener rework has been completed, more than
4 years ago. We got no complain of this change breaking any
legacy application.

Many applications indeed setup a TCP listener with listen(fd, -1);
meaning they let the system select the backlog.

Raising SOMAXCONN lowers chance of the port being unavailable under
even small SYNFLOOD attack, and reduces possibilities of side channel
vulnerabilities.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonetdevsim: Fix use-after-free during device dismantle
Ido Schimmel [Thu, 31 Oct 2019 16:20:30 +0000 (18:20 +0200)]
netdevsim: Fix use-after-free during device dismantle

Commit da58f90f11f5 ("netdevsim: Add devlink-trap support") added
delayed work to netdevsim that periodically iterates over the registered
netdevsim ports and reports various packet traps via devlink.

While the delayed work takes the 'port_list_lock' mutex to protect
against concurrent addition / deletion of ports, during device creation
/ dismantle ports are added / deleted without this lock, which can
result in a use-after-free [1].

Fix this by making sure that the ports list is always modified under the
lock.

[1]
[   59.205543] ==================================================================
[   59.207748] BUG: KASAN: use-after-free in nsim_dev_trap_report_work+0xa67/0xad0
[   59.210247] Read of size 8 at addr ffff8883cbdd3398 by task kworker/3:1/38
[   59.212584]
[   59.213148] CPU: 3 PID: 38 Comm: kworker/3:1 Not tainted 5.4.0-rc3-custom-16119-ge6abb5f0261e #2013
[   59.215896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[   59.218384] Workqueue: events nsim_dev_trap_report_work
[   59.219428] Call Trace:
[   59.219924]  dump_stack+0xa9/0x10e
[   59.220623]  print_address_description.constprop.4+0x21/0x340
[   59.221976]  ? vprintk_func+0x66/0x240
[   59.222752]  __kasan_report.cold.8+0x78/0x91
[   59.223602]  ? nsim_dev_trap_report_work+0xa67/0xad0
[   59.224603]  kasan_report+0xe/0x20
[   59.225296]  nsim_dev_trap_report_work+0xa67/0xad0
[   59.226435]  ? rcu_read_lock_sched_held+0xaf/0xe0
[   59.227512]  ? trace_event_raw_event_rcu_quiescent_state_report+0x360/0x360
[   59.228851]  process_one_work+0x98f/0x1760
[   59.229684]  ? pwq_dec_nr_in_flight+0x330/0x330
[   59.230656]  worker_thread+0x91/0xc40
[   59.231587]  ? process_one_work+0x1760/0x1760
[   59.232451]  kthread+0x34a/0x410
[   59.233104]  ? __kthread_queue_delayed_work+0x240/0x240
[   59.234141]  ret_from_fork+0x3a/0x50
[   59.234982]
[   59.235371] Allocated by task 187:
[   59.236189]  save_stack+0x19/0x80
[   59.236853]  __kasan_kmalloc.constprop.5+0xc1/0xd0
[   59.237822]  kmem_cache_alloc_trace+0x14c/0x380
[   59.238769]  __nsim_dev_port_add+0xaf/0x5c0
[   59.239627]  nsim_dev_probe+0x4fc/0x1140
[   59.240550]  really_probe+0x264/0xc00
[   59.241418]  driver_probe_device+0x208/0x2e0
[   59.242255]  __device_attach_driver+0x215/0x2d0
[   59.243150]  bus_for_each_drv+0x154/0x1d0
[   59.243944]  __device_attach+0x1ba/0x2b0
[   59.244923]  bus_probe_device+0x1dd/0x290
[   59.245805]  device_add+0xbac/0x1550
[   59.246528]  new_device_store+0x1f4/0x400
[   59.247306]  bus_attr_store+0x7b/0xa0
[   59.248047]  sysfs_kf_write+0x10f/0x170
[   59.248941]  kernfs_fop_write+0x283/0x430
[   59.249843]  __vfs_write+0x81/0x100
[   59.250546]  vfs_write+0x1ce/0x510
[   59.251190]  ksys_write+0x104/0x200
[   59.251873]  do_syscall_64+0xa4/0x4e0
[   59.252642]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   59.253837]
[   59.254203] Freed by task 187:
[   59.254811]  save_stack+0x19/0x80
[   59.255463]  __kasan_slab_free+0x125/0x170
[   59.256265]  kfree+0x100/0x440
[   59.256870]  nsim_dev_remove+0x98/0x100
[   59.257651]  nsim_bus_remove+0x16/0x20
[   59.258382]  device_release_driver_internal+0x20b/0x4d0
[   59.259588]  bus_remove_device+0x2e9/0x5a0
[   59.260551]  device_del+0x410/0xad0
[   59.263777]  device_unregister+0x26/0xc0
[   59.264616]  nsim_bus_dev_del+0x16/0x60
[   59.265381]  del_device_store+0x2d6/0x3c0
[   59.266295]  bus_attr_store+0x7b/0xa0
[   59.267192]  sysfs_kf_write+0x10f/0x170
[   59.267960]  kernfs_fop_write+0x283/0x430
[   59.268800]  __vfs_write+0x81/0x100
[   59.269551]  vfs_write+0x1ce/0x510
[   59.270252]  ksys_write+0x104/0x200
[   59.270910]  do_syscall_64+0xa4/0x4e0
[   59.271680]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   59.272812]
[   59.273211] The buggy address belongs to the object at ffff8883cbdd3200
[   59.273211]  which belongs to the cache kmalloc-512 of size 512
[   59.275838] The buggy address is located 408 bytes inside of
[   59.275838]  512-byte region [ffff8883cbdd3200ffff8883cbdd3400)
[   59.278151] The buggy address belongs to the page:
[   59.279215] page:ffffea000f2f7400 refcount:1 mapcount:0 mapping:ffff8883ecc0ce00 index:0x0 compound_mapcount: 0
[   59.281449] flags: 0x200000000010200(slab|head)
[   59.282356] raw: 0200000000010200 ffffea000f2f3a08 ffffea000f2fd608 ffff8883ecc0ce00
[   59.283949] raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000
[   59.285608] page dumped because: kasan: bad access detected
[   59.286981]
[   59.287337] Memory state around the buggy address:
[   59.288310]  ffff8883cbdd3280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   59.289763]  ffff8883cbdd3300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   59.291452] >ffff8883cbdd3380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   59.292945]                             ^
[   59.293815]  ffff8883cbdd3400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   59.295220]  ffff8883cbdd3480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   59.296872] ==================================================================

Fixes: da58f90f11f5 ("netdevsim: Add devlink-trap support")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: syzbot+9ed8f68ab30761f3678e@syzkaller.appspotmail.com
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agorxrpc: Fix handling of last subpacket of jumbo packet
David Howells [Thu, 31 Oct 2019 12:13:46 +0000 (12:13 +0000)]
rxrpc: Fix handling of last subpacket of jumbo packet

When rxrpc_recvmsg_data() sets the return value to 1 because it's drained
all the data for the last packet, it checks the last-packet flag on the
whole packet - but this is wrong, since the last-packet flag is only set on
the final subpacket of the last jumbo packet.  This means that a call that
receives its last packet in a jumbo packet won't complete properly.

Fix this by having rxrpc_locate_data() determine the last-packet state of
the subpacket it's looking at and passing that back to the caller rather
than having the caller look in the packet header.  The caller then needs to
cache this in the rxrpc_call struct as rxrpc_locate_data() isn't then
called again for this packet.

Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Fixes: e2de6c404898 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge tag 'mac80211-for-net-2019-10-31' of git://git.kernel.org/pub/scm/linux/kernel...
David S. Miller [Thu, 31 Oct 2019 18:43:36 +0000 (11:43 -0700)]
Merge tag 'mac80211-for-net-2019-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just two fixes:
 * HT operation is not allowed on channel 14 (Japan only)
 * netlink policy for nexthop attribute was wrong
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'hv_netvsc-fix-error-handling-in-netvsc_attach-set_features'
David S. Miller [Thu, 31 Oct 2019 01:17:36 +0000 (18:17 -0700)]
Merge branch 'hv_netvsc-fix-error-handling-in-netvsc_attach-set_features'

Haiyang Zhang says:

====================
hv_netvsc: fix error handling in netvsc_attach/set_features

The error handling code path in these functions are not correct.
This patch set fixes them.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agohv_netvsc: Fix error handling in netvsc_attach()
Haiyang Zhang [Wed, 30 Oct 2019 15:32:13 +0000 (15:32 +0000)]
hv_netvsc: Fix error handling in netvsc_attach()

If rndis_filter_open() fails, we need to remove the rndis device created
in earlier steps, before returning an error code. Otherwise, the retry of
netvsc_attach() from its callers will fail and hang.

Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agohv_netvsc: Fix error handling in netvsc_set_features()
Haiyang Zhang [Wed, 30 Oct 2019 15:32:11 +0000 (15:32 +0000)]
hv_netvsc: Fix error handling in netvsc_set_features()

When an error is returned by rndis_filter_set_offload_params(), we should
still assign the unaffected features to ndev->features. Otherwise, these
features will be missing.

Fixes: d6792a5a0747 ("hv_netvsc: Add handler for LRO setting change")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agocxgb4: fix panic when attaching to ULD fail
Vishal Kulkarni [Wed, 30 Oct 2019 14:47:57 +0000 (20:17 +0530)]
cxgb4: fix panic when attaching to ULD fail

Release resources when attaching to ULD fail. Otherwise, data
mismatch is seen between LLD and ULD later on, which lead to
kernel panic when accessing resources that should not even
exist in the first place.

Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: annotate lockless accesses to sk->sk_napi_id
Eric Dumazet [Tue, 29 Oct 2019 17:54:44 +0000 (10:54 -0700)]
net: annotate lockless accesses to sk->sk_napi_id

We already annotated most accesses to sk->sk_napi_id

We missed sk_mark_napi_id() and sk_mark_napi_id_once()
which might be called without socket lock held in UDP stack.

KCSAN reported :
BUG: KCSAN: data-race in udpv6_queue_rcv_one_skb / udpv6_queue_rcv_one_skb

write to 0xffff888121c6d108 of 4 bytes by interrupt on cpu 0:
 sk_mark_napi_id include/net/busy_poll.h:125 [inline]
 __udpv6_queue_rcv_skb net/ipv6/udp.c:571 [inline]
 udpv6_queue_rcv_one_skb+0x70c/0xb40 net/ipv6/udp.c:672
 udpv6_queue_rcv_skb+0xb5/0x400 net/ipv6/udp.c:689
 udp6_unicast_rcv_skb.isra.0+0xd7/0x180 net/ipv6/udp.c:832
 __udp6_lib_rcv+0x69c/0x1770 net/ipv6/udp.c:913
 udpv6_rcv+0x2b/0x40 net/ipv6/udp.c:1015
 ip6_protocol_deliver_rcu+0x22a/0xbe0 net/ipv6/ip6_input.c:409
 ip6_input_finish+0x30/0x50 net/ipv6/ip6_input.c:450
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip6_input+0x177/0x190 net/ipv6/ip6_input.c:459
 dst_input include/net/dst.h:442 [inline]
 ip6_rcv_finish+0x110/0x140 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ipv6_rcv+0x1a1/0x1b0 net/ipv6/ip6_input.c:284
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955
 napi_poll net/core/dev.c:6392 [inline]
 net_rx_action+0x3ae/0xa90 net/core/dev.c:6460

write to 0xffff888121c6d108 of 4 bytes by interrupt on cpu 1:
 sk_mark_napi_id include/net/busy_poll.h:125 [inline]
 __udpv6_queue_rcv_skb net/ipv6/udp.c:571 [inline]
 udpv6_queue_rcv_one_skb+0x70c/0xb40 net/ipv6/udp.c:672
 udpv6_queue_rcv_skb+0xb5/0x400 net/ipv6/udp.c:689
 udp6_unicast_rcv_skb.isra.0+0xd7/0x180 net/ipv6/udp.c:832
 __udp6_lib_rcv+0x69c/0x1770 net/ipv6/udp.c:913
 udpv6_rcv+0x2b/0x40 net/ipv6/udp.c:1015
 ip6_protocol_deliver_rcu+0x22a/0xbe0 net/ipv6/ip6_input.c:409
 ip6_input_finish+0x30/0x50 net/ipv6/ip6_input.c:450
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip6_input+0x177/0x190 net/ipv6/ip6_input.c:459
 dst_input include/net/dst.h:442 [inline]
 ip6_rcv_finish+0x110/0x140 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ipv6_rcv+0x1a1/0x1b0 net/ipv6/ip6_input.c:284
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 10890 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: e68b6e50fa35 ("udp: enable busy polling for all sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: annotate accesses to sk->sk_incoming_cpu
Eric Dumazet [Wed, 30 Oct 2019 20:00:04 +0000 (13:00 -0700)]
net: annotate accesses to sk->sk_incoming_cpu

This socket field can be read and written by concurrent cpus.

Use READ_ONCE() and WRITE_ONCE() annotations to document this,
and avoid some compiler 'optimizations'.

KCSAN reported :

BUG: KCSAN: data-race in tcp_v4_rcv / tcp_v4_rcv

write to 0xffff88812220763c of 4 bytes by interrupt on cpu 0:
 sk_incoming_cpu_update include/net/sock.h:953 [inline]
 tcp_v4_rcv+0x1b3c/0x1bb0 net/ipv4/tcp_ipv4.c:1934
 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955
 napi_poll net/core/dev.c:6392 [inline]
 net_rx_action+0x3ae/0xa90 net/core/dev.c:6460
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082
 do_softirq.part.0+0x6b/0x80 kernel/softirq.c:337
 do_softirq kernel/softirq.c:329 [inline]
 __local_bh_enable_ip+0x76/0x80 kernel/softirq.c:189

read to 0xffff88812220763c of 4 bytes by interrupt on cpu 1:
 sk_incoming_cpu_update include/net/sock.h:952 [inline]
 tcp_v4_rcv+0x181a/0x1bb0 net/ipv4/tcp_ipv4.c:1934
 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955
 napi_poll net/core/dev.c:6392 [inline]
 net_rx_action+0x3ae/0xa90 net/core/dev.c:6460
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agomlxsw: core: Unpublish devlink parameters during reload
Jiri Pirko [Wed, 30 Oct 2019 09:04:22 +0000 (11:04 +0200)]
mlxsw: core: Unpublish devlink parameters during reload

The devlink parameter "acl_region_rehash_interval" is a runtime
parameter whose value is stored in a dynamically allocated memory. While
reloading the driver, this memory is freed and then allocated again. A
use-after-free might happen if during this time frame someone tries to
retrieve its value.

Since commit 070c63f20f6c ("net: devlink: allow to change namespaces
during reload") the use-after-free can be reliably triggered when
reloading the driver into a namespace, as after freeing the memory (via
reload_down() callback) all the parameters are notified.

Fix this by unpublishing and then re-publishing the parameters during
reload.

Fixes: 98bbf70c1c41 ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param")
Fixes: 7c62cfb8c574 ("devlink: publish params only after driver init is done")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoqed: Optimize execution time for nvm attributes configuration.
Sudarsana Reddy Kalluru [Wed, 30 Oct 2019 08:39:58 +0000 (01:39 -0700)]
qed: Optimize execution time for nvm attributes configuration.

Current implementation for nvm_attr configuration instructs the management
FW to load/unload the nvm-cfg image for each user-provided attribute in
the input file. This consumes lot of cycles even for few tens of
attributes.
This patch updates the implementation to perform load/commit of the config
for every 50 attributes. After loading the nvm-image, MFW expects that
config should be committed in a predefined timer value (5 sec), hence it's
not possible to write large number of attributes in a single load/commit
window. Hence performing the commits in chunks.

Fixes: 0dabbe1bb3a4 ("qed: Add driver API for flashing the config attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agovxlan: fix unexpected failure of vxlan_changelink()
Taehee Yoo [Wed, 30 Oct 2019 08:15:12 +0000 (08:15 +0000)]
vxlan: fix unexpected failure of vxlan_changelink()

After commit 0ce1822c2a08 ("vxlan: add adjacent link to limit depth
level"), vxlan_changelink() could fail because of
netdev_adjacent_change_prepare().
netdev_adjacent_change_prepare() returns -EEXIST when old lower device
and new lower device are same.
(old lower device is "dst->remote_dev" and new lower device is "lowerdev")
So, before calling it, lowerdev should be NULL if these devices are same.

Test command1:
    ip link add dummy0 type dummy
    ip link add vxlan0 type vxlan dev dummy0 dstport 4789 vni 1
    ip link set vxlan0 type vxlan ttl 5
    RTNETLINK answers: File exists

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoqed: fix spelling mistake "queuess" -> "queues"
Colin Ian King [Wed, 30 Oct 2019 07:59:22 +0000 (08:59 +0100)]
qed: fix spelling mistake "queuess" -> "queues"

There is a spelling misake in a DP_NOTICE message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonl80211: fix validation of mesh path nexthop
Markus Theil [Tue, 29 Oct 2019 09:30:03 +0000 (10:30 +0100)]
nl80211: fix validation of mesh path nexthop

Mesh path nexthop should be a ethernet address, but current validation
checks against 4 byte integers.

Cc: stable@vger.kernel.org
Fixes: 2ec600d672e74 ("nl80211/cfg80211: support for mesh, sta dumping")
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20191029093003.10355-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
5 years agonl80211: Disallow setting of HT for channel 14
Masashi Honma [Mon, 21 Oct 2019 07:50:45 +0000 (16:50 +0900)]
nl80211: Disallow setting of HT for channel 14

This patch disables setting of HT20 and more for channel 14 because
the channel is only for IEEE 802.11b.

The patch for net/wireless/util.c was unit-tested.

The patch for net/wireless/chan.c was tested with iw command.

Before this patch.
$ sudo iw dev <ifname> set channel 14 HT20
$

After this patch.
$ sudo iw dev <ifname> set channel 14 HT20
kernel reports: invalid channel definition
command failed: Invalid argument (-22)
$

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://lore.kernel.org/r/20191021075045.2719-1-masashi.honma@gmail.com
[clean up the code, use != instead of equivalent >]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
5 years agoMerge tag 'mlx5-fixes-2019-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git...
David S. Miller [Wed, 30 Oct 2019 03:59:11 +0000 (20:59 -0700)]
Merge tag 'mlx5-fixes-2019-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-10-24

This series introduces misc fixes to mlx5 driver.

v1->v2:
 - Dropped the kTLS counter documentation patch, Tariq will fix it and
   send it later.
 - Added a new fix for link speed mode reporting.
  ('net/mlx5e: Initialize link modes bitmap on stack')

For -stable v4.14
  ('net/mlx5e: Fix handling of compressed CQEs in case of low NAPI budget')

For -stable v4.19
  ('net/mlx5e: Fix ethtool self test: link speed')

For -stable v5.2
  ('net/mlx5: Fix flow counter list auto bits struct')
  ('net/mlx5: Fix rtable reference leak')

For -stable v5.3
  ('net/mlx5e: Remove incorrect match criteria assignment line')
  ('net/mlx5e: Determine source port properly for vlan push action')
  ('net/mlx5e: Initialize link modes bitmap on stack')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: rtnetlink: fix a typo fbd -> fdb
Nikolay Aleksandrov [Tue, 29 Oct 2019 11:59:32 +0000 (13:59 +0200)]
net: rtnetlink: fix a typo fbd -> fdb

A simple typo fix in the nl error message (fbd -> fdb).

CC: David Ahern <dsahern@gmail.com>
Fixes: 8c6e137fbc7f ("rtnetlink: Update rtnl_fdb_dump for strict data checking")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet/smc: fix refcounting for non-blocking connect()
Ursula Braun [Tue, 29 Oct 2019 11:41:26 +0000 (12:41 +0100)]
net/smc: fix refcounting for non-blocking connect()

If a nonblocking socket is immediately closed after connect(),
the connect worker may not have started. This results in a refcount
problem, since sock_hold() is called from the connect worker.
This patch moves the sock_hold in front of the connect worker
scheduling.

Reported-by: syzbot+4c063e6dea39e4b79f29@syzkaller.appspotmail.com
Fixes: 50717a37db03 ("net/smc: nonblocking connect rework")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agobonding: fix using uninitialized mode_lock
Taehee Yoo [Tue, 29 Oct 2019 09:12:32 +0000 (09:12 +0000)]
bonding: fix using uninitialized mode_lock

When a bonding interface is being created, it setups its mode and options.
At that moment, it uses mode_lock so mode_lock should be initialized
before that moment.

rtnl_newlink()
rtnl_create_link()
alloc_netdev_mqs()
->setup() //bond_setup()
->newlink //bond_newlink
bond_changelink()
register_netdevice()
->ndo_init() //bond_init()

After commit 089bca2caed0 ("bonding: use dynamic lockdep key instead of
subclass"), mode_lock is initialized in bond_init().
So in the bond_changelink(), un-initialized mode_lock can be used.
mode_lock should be initialized in bond_setup().
This patch partially reverts commit 089bca2caed0 ("bonding: use dynamic
lockdep key instead of subclass")

Test command:
    ip link add bond0 type bond mode 802.3ad lacp_rate 0

Splat looks like:
[   60.615127] INFO: trying to register non-static key.
[   60.615900] the code is fine but needs lockdep annotation.
[   60.616697] turning off the locking correctness validator.
[   60.617490] CPU: 1 PID: 957 Comm: ip Not tainted 5.4.0-rc3+ #109
[   60.618350] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   60.619481] Call Trace:
[   60.619918]  dump_stack+0x7c/0xbb
[   60.620453]  register_lock_class+0x1215/0x14d0
[   60.621131]  ? alloc_netdev_mqs+0x7b3/0xcc0
[   60.621771]  ? is_bpf_text_address+0x86/0xf0
[   60.622416]  ? is_dynamic_key+0x230/0x230
[   60.623032]  ? unwind_get_return_address+0x5f/0xa0
[   60.623757]  ? create_prof_cpu_mask+0x20/0x20
[   60.624408]  ? arch_stack_walk+0x83/0xb0
[   60.625023]  __lock_acquire+0xd8/0x3de0
[   60.625616]  ? stack_trace_save+0x82/0xb0
[   60.626225]  ? stack_trace_consume_entry+0x160/0x160
[   60.626957]  ? deactivate_slab.isra.80+0x2c5/0x800
[   60.627668]  ? register_lock_class+0x14d0/0x14d0
[   60.628380]  ? alloc_netdev_mqs+0x7b3/0xcc0
[   60.629020]  ? save_stack+0x69/0x80
[   60.629574]  ? save_stack+0x19/0x80
[   60.630121]  ? __kasan_kmalloc.constprop.4+0xa0/0xd0
[   60.630859]  ? __kmalloc_node+0x16f/0x480
[   60.631472]  ? alloc_netdev_mqs+0x7b3/0xcc0
[   60.632121]  ? rtnl_create_link+0x2ed/0xad0
[   60.634388]  ? __rtnl_newlink+0xad4/0x11b0
[   60.635024]  lock_acquire+0x164/0x3b0
[   60.635608]  ? bond_3ad_update_lacp_rate+0x91/0x200 [bonding]
[   60.636463]  _raw_spin_lock_bh+0x38/0x70
[   60.637084]  ? bond_3ad_update_lacp_rate+0x91/0x200 [bonding]
[   60.637930]  bond_3ad_update_lacp_rate+0x91/0x200 [bonding]
[   60.638753]  ? bond_3ad_lacpdu_recv+0xb30/0xb30 [bonding]
[   60.639552]  ? bond_opt_get_val+0x180/0x180 [bonding]
[   60.640307]  ? ___slab_alloc+0x5aa/0x610
[   60.640925]  bond_option_lacp_rate_set+0x71/0x140 [bonding]
[   60.641751]  __bond_opt_set+0x1ff/0xbb0 [bonding]
[   60.643217]  ? kasan_unpoison_shadow+0x30/0x40
[   60.643924]  bond_changelink+0x9a4/0x1700 [bonding]
[   60.644653]  ? memset+0x1f/0x40
[   60.742941]  ? bond_slave_changelink+0x1a0/0x1a0 [bonding]
[   60.752694]  ? alloc_netdev_mqs+0x8ea/0xcc0
[   60.753330]  ? rtnl_create_link+0x2ed/0xad0
[   60.753964]  bond_newlink+0x1e/0x60 [bonding]
[   60.754612]  __rtnl_newlink+0xb9f/0x11b0
[ ... ]

Reported-by: syzbot+8da67f407bcba2c72e6e@syzkaller.appspotmail.com
Reported-by: syzbot+0d083911ab18b710da71@syzkaller.appspotmail.com
Fixes: 089bca2caed0 ("bonding: use dynamic lockdep key instead of subclass")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: fec_ptp: Use platform_get_irq_xxx_optional() to avoid error message
Anson Huang [Tue, 29 Oct 2019 01:53:19 +0000 (09:53 +0800)]
net: fec_ptp: Use platform_get_irq_xxx_optional() to avoid error message

Use platform_get_irq_byname_optional() and platform_get_irq_optional()
instead of platform_get_irq_byname() and platform_get_irq() for optional
IRQs to avoid below error message during probe:

[    0.795803] fec 30be0000.ethernet: IRQ pps not found
[    0.800787] fec 30be0000.ethernet: IRQ index 3 not found

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: fec_main: Use platform_get_irq_byname_optional() to avoid error message
Anson Huang [Tue, 29 Oct 2019 01:53:18 +0000 (09:53 +0800)]
net: fec_main: Use platform_get_irq_byname_optional() to avoid error message

Failed to get irq using name is NOT fatal as driver will use index
to get irq instead, use platform_get_irq_byname_optional() instead
of platform_get_irq_byname() to avoid below error message during
probe:

[    0.819312] fec 30be0000.ethernet: IRQ int0 not found
[    0.824433] fec 30be0000.ethernet: IRQ int1 not found
[    0.829539] fec 30be0000.ethernet: IRQ int2 not found

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMAINTAINERS: remove Dave Watson as TLS maintainer
Jakub Kicinski [Mon, 28 Oct 2019 22:11:31 +0000 (15:11 -0700)]
MAINTAINERS: remove Dave Watson as TLS maintainer

Dave's Facebook email address is not working, and my attempts
to contact him are failing. Let's remove it to trim down the
list of TLS maintainers.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agovxlan: check tun_info options_len properly
Xin Long [Mon, 28 Oct 2019 17:24:32 +0000 (01:24 +0800)]
vxlan: check tun_info options_len properly

This patch is to improve the tun_info options_len by dropping
the skb when TUNNEL_VXLAN_OPT is set but options_len is less
than vxlan_metadata. This can void a potential out-of-bounds
access on ip_tun_info.

Fixes: ee122c79d422 ("vxlan: Flow based tunneling")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoerspan: fix the tun_info options_len check for erspan
Xin Long [Mon, 28 Oct 2019 15:19:35 +0000 (23:19 +0800)]
erspan: fix the tun_info options_len check for erspan

The check for !md doens't really work for ip_tunnel_info_opts(info) which
only does info + 1. Also to avoid out-of-bounds access on info, it should
ensure options_len is not less than erspan_metadata in both erspan_xmit()
and ip6erspan_tunnel_xmit().

Fixes: 1a66a836da ("gre: add collect_md mode to ERSPAN tunnel")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hisilicon: Fix ping latency when deal with high throughput
Jiangfeng Xiao [Mon, 28 Oct 2019 05:09:46 +0000 (13:09 +0800)]
net: hisilicon: Fix ping latency when deal with high throughput

This is due to error in over budget processing.
When dealing with high throughput, the used buffers
that exceeds the budget is not cleaned up. In addition,
it takes a lot of cycles to clean up the used buffer,
and then the buffer where the valid data is located can take effect.

Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet/mlx4_core: Dynamically set guaranteed amount of counters per VF
Eran Ben Elisha [Sun, 27 Oct 2019 14:39:15 +0000 (16:39 +0200)]
net/mlx4_core: Dynamically set guaranteed amount of counters per VF

Prior to this patch, the amount of counters guaranteed per VF in the
resource tracker was MLX4_VF_COUNTERS_PER_PORT * MLX4_MAX_PORTS. It was
set regardless if the VF was single or dual port.
This caused several VFs to have no guaranteed counters although the
system could satisfy their request.

The fix is to dynamically guarantee counters, based on each VF
specification.

Fixes: 9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet/mlx5e: Initialize on stack link modes bitmap
Aya Levin [Wed, 23 Oct 2019 09:57:54 +0000 (12:57 +0300)]
net/mlx5e: Initialize on stack link modes bitmap

Initialize link modes bitmap on stack before using it, otherwise the
outcome of ethtool set link ksettings might have unexpected values.

Fixes: 4b95840a6ced ("net/mlx5e: Fix matching of speed to PRM link modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agonet/mlx5e: Fix ethtool self test: link speed
Aya Levin [Wed, 2 Oct 2019 13:53:21 +0000 (16:53 +0300)]
net/mlx5e: Fix ethtool self test: link speed

Ethtool self test contains a test for link speed. This test reads the
PTYS register and determines whether the current speed is valid or not.
Change current implementation to use the function mlx5e_port_linkspeed()
that does the same check and fails when speed is invalid. This code
redundancy lead to a bug when mlx5e_port_linkspeed() was updated with
expended speeds and the self test was not.

Fixes: 2c81bfd5ae56 ("net/mlx5e: Move port speed code from en_ethtool.c to en/port.c")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agonet/mlx5e: Fix handling of compressed CQEs in case of low NAPI budget
Maxim Mikityanskiy [Mon, 16 Sep 2019 11:54:20 +0000 (14:54 +0300)]
net/mlx5e: Fix handling of compressed CQEs in case of low NAPI budget

When CQE compression is enabled, compressed CQEs use the following
structure: a title is followed by one or many blocks, each containing 8
mini CQEs (except the last, which may contain fewer mini CQEs).

Due to NAPI budget restriction, a complete structure is not always
parsed in one NAPI run, and some blocks with mini CQEs may be deferred
to the next NAPI poll call - we have the mlx5e_decompress_cqes_cont call
in the beginning of mlx5e_poll_rx_cq. However, if the budget is
extremely low, some blocks may be left even after that, but the code
that follows the mlx5e_decompress_cqes_cont call doesn't check it and
assumes that a new CQE begins, which may not be the case. In such cases,
random memory corruptions occur.

An extremely low NAPI budget of 8 is used when busy_poll or busy_read is
active.

This commit adds a check to make sure that the previous compressed CQE
has been completely parsed after mlx5e_decompress_cqes_cont, otherwise
it prevents a new CQE from being fetched in the middle of a compressed
CQE.

This commit fixes random crashes in __build_skb, __page_pool_put_page
and other not-related-directly places, that used to happen when both CQE
compression and busy_poll/busy_read were enabled.

Fixes: 7219ab34f184 ("net/mlx5e: CQE compression")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agonet/mlx5e: Don't store direct pointer to action's tunnel info
Vlad Buslov [Tue, 10 Sep 2019 11:38:17 +0000 (14:38 +0300)]
net/mlx5e: Don't store direct pointer to action's tunnel info

Geneve implementation changed mlx5 tc to user direct pointer to tunnel_key
action's internal struct ip_tunnel_info instance. However, this leads to
use-after-free error when initial filter that caused creation of new encap
entry is deleted or when tunnel_key action is manually overwritten through
action API. Moreover, with recent TC offloads API unlocking change struct
flow_action_entry->tunnel point to temporal copy of tunnel info that is
deallocated after filter is offloaded to hardware which causes bug to
reproduce every time new filter is attached to existing encap entry with
following KASAN bug:

[  314.885555] ==================================================================
[  314.886641] BUG: KASAN: use-after-free in memcmp+0x2c/0x60
[  314.886864] Read of size 1 at addr ffff88886c746280 by task tc/2682

[  314.887179] CPU: 22 PID: 2682 Comm: tc Not tainted 5.3.0-rc7+ #703
[  314.887188] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  314.887195] Call Trace:
[  314.887215]  dump_stack+0x9a/0xf0
[  314.887236]  print_address_description+0x67/0x323
[  314.887248]  ? memcmp+0x2c/0x60
[  314.887257]  ? memcmp+0x2c/0x60
[  314.887272]  __kasan_report.cold+0x1a/0x3d
[  314.887474]  ? __mlx5e_tc_del_fdb_peer_flow+0x100/0x1b0 [mlx5_core]
[  314.887484]  ? memcmp+0x2c/0x60
[  314.887509]  kasan_report+0xe/0x12
[  314.887521]  memcmp+0x2c/0x60
[  314.887662]  mlx5e_tc_add_fdb_flow+0x51b/0xbe0 [mlx5_core]
[  314.887838]  ? mlx5e_encap_take+0x110/0x110 [mlx5_core]
[  314.887902]  ? lockdep_init_map+0x87/0x2c0
[  314.887924]  ? __init_waitqueue_head+0x4f/0x60
[  314.888062]  ? mlx5e_alloc_flow.isra.0+0x18c/0x1c0 [mlx5_core]
[  314.888207]  __mlx5e_add_fdb_flow+0x2d7/0x440 [mlx5_core]
[  314.888359]  ? mlx5e_tc_update_neigh_used_value+0x6f0/0x6f0 [mlx5_core]
[  314.888374]  ? match_held_lock+0x2e/0x240
[  314.888537]  mlx5e_configure_flower+0x830/0x16a0 [mlx5_core]
[  314.888702]  ? __mlx5e_add_fdb_flow+0x440/0x440 [mlx5_core]
[  314.888713]  ? down_read+0x118/0x2c0
[  314.888728]  ? down_read_killable+0x300/0x300
[  314.888882]  ? mlx5e_rep_get_ethtool_stats+0x180/0x180 [mlx5_core]
[  314.888899]  tc_setup_cb_add+0x127/0x270
[  314.888937]  fl_hw_replace_filter+0x2ac/0x380 [cls_flower]
[  314.888976]  ? fl_hw_destroy_filter+0x1b0/0x1b0 [cls_flower]
[  314.888990]  ? fl_change+0xbcf/0x27ef [cls_flower]
[  314.889030]  ? fl_change+0xa57/0x27ef [cls_flower]
[  314.889069]  fl_change+0x16bd/0x27ef [cls_flower]
[  314.889135]  ? __rhashtable_insert_fast.constprop.0+0xa00/0xa00 [cls_flower]
[  314.889167]  ? __radix_tree_lookup+0xa4/0x130
[  314.889200]  ? fl_get+0x169/0x240 [cls_flower]
[  314.889218]  ? fl_walk+0x230/0x230 [cls_flower]
[  314.889249]  tc_new_tfilter+0x5e1/0xd40
[  314.889281]  ? __rhashtable_insert_fast.constprop.0+0xa00/0xa00 [cls_flower]
[  314.889309]  ? tc_del_tfilter+0xa30/0xa30
[  314.889335]  ? __lock_acquire+0x5b5/0x2460
[  314.889378]  ? find_held_lock+0x85/0xa0
[  314.889442]  ? tc_del_tfilter+0xa30/0xa30
[  314.889465]  rtnetlink_rcv_msg+0x4ab/0x5f0
[  314.889488]  ? rtnl_dellink+0x490/0x490
[  314.889518]  ? lockdep_hardirqs_on+0x260/0x260
[  314.889538]  ? netlink_deliver_tap+0xab/0x5a0
[  314.889550]  ? match_held_lock+0x1b/0x240
[  314.889575]  netlink_rcv_skb+0xd0/0x200
[  314.889588]  ? rtnl_dellink+0x490/0x490
[  314.889605]  ? netlink_ack+0x440/0x440
[  314.889635]  ? netlink_deliver_tap+0x161/0x5a0
[  314.889648]  ? lock_downgrade+0x360/0x360
[  314.889657]  ? lock_acquire+0xe5/0x210
[  314.889686]  netlink_unicast+0x296/0x350
[  314.889707]  ? netlink_attachskb+0x390/0x390
[  314.889726]  ? _copy_from_iter_full+0xe0/0x3a0
[  314.889738]  ? __virt_addr_valid+0xbb/0x130
[  314.889771]  netlink_sendmsg+0x394/0x600
[  314.889800]  ? netlink_unicast+0x350/0x350
[  314.889817]  ? move_addr_to_kernel.part.0+0x90/0x90
[  314.889852]  ? netlink_unicast+0x350/0x350
[  314.889872]  sock_sendmsg+0x96/0xa0
[  314.889891]  ___sys_sendmsg+0x482/0x520
[  314.889919]  ? copy_msghdr_from_user+0x250/0x250
[  314.889930]  ? __fput+0x1fa/0x390
[  314.889941]  ? task_work_run+0xb7/0xf0
[  314.889957]  ? exit_to_usermode_loop+0x117/0x120
[  314.889972]  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  314.889982]  ? do_syscall_64+0x74/0xe0
[  314.889992]  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  314.890012]  ? mark_lock+0xac/0x9a0
[  314.890028]  ? __lock_acquire+0x5b5/0x2460
[  314.890053]  ? mark_lock+0xac/0x9a0
[  314.890083]  ? __lock_acquire+0x5b5/0x2460
[  314.890112]  ? match_held_lock+0x1b/0x240
[  314.890144]  ? __fget_light+0xa1/0xf0
[  314.890166]  ? sockfd_lookup_light+0x91/0xb0
[  314.890187]  __sys_sendmsg+0xba/0x130
[  314.890201]  ? __sys_sendmsg_sock+0xb0/0xb0
[  314.890225]  ? __blkcg_punt_bio_submit+0xd0/0xd0
[  314.890264]  ? lockdep_hardirqs_off+0xbe/0x100
[  314.890274]  ? mark_held_locks+0x24/0x90
[  314.890286]  ? do_syscall_64+0x1e/0xe0
[  314.890308]  do_syscall_64+0x74/0xe0
[  314.890325]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  314.890336] RIP: 0033:0x7f00ca33d7b8
[  314.890348] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5
4
[  314.890356] RSP: 002b:00007ffea2983928 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  314.890369] RAX: ffffffffffffffda RBX: 000000005d777d5b RCX: 00007f00ca33d7b8
[  314.890377] RDX: 0000000000000000 RSI: 00007ffea2983990 RDI: 0000000000000003
[  314.890384] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006
[  314.890392] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001
[  314.890400] R13: 000000000047f640 R14: 00007ffea2987b58 R15: 0000000000000021

[  314.890529] Allocated by task 2687:
[  314.890684]  save_stack+0x1b/0x80
[  314.890694]  __kasan_kmalloc.constprop.0+0xc2/0xd0
[  314.890705]  __kmalloc_track_caller+0x102/0x340
[  314.890721]  kmemdup+0x1d/0x40
[  314.890730]  tc_setup_flow_action+0x731/0x2c27
[  314.890743]  fl_hw_replace_filter+0x23b/0x380 [cls_flower]
[  314.890756]  fl_change+0x16bd/0x27ef [cls_flower]
[  314.890765]  tc_new_tfilter+0x5e1/0xd40
[  314.890776]  rtnetlink_rcv_msg+0x4ab/0x5f0
[  314.890786]  netlink_rcv_skb+0xd0/0x200
[  314.890796]  netlink_unicast+0x296/0x350
[  314.890805]  netlink_sendmsg+0x394/0x600
[  314.890815]  sock_sendmsg+0x96/0xa0
[  314.890825]  ___sys_sendmsg+0x482/0x520
[  314.890834]  __sys_sendmsg+0xba/0x130
[  314.890844]  do_syscall_64+0x74/0xe0
[  314.890854]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[  314.890937] Freed by task 2687:
[  314.891076]  save_stack+0x1b/0x80
[  314.891086]  __kasan_slab_free+0x12c/0x170
[  314.891095]  kfree+0xeb/0x2f0
[  314.891106]  tc_cleanup_flow_action+0x69/0xa0
[  314.891119]  fl_hw_replace_filter+0x2c5/0x380 [cls_flower]
[  314.891132]  fl_change+0x16bd/0x27ef [cls_flower]
[  314.891140]  tc_new_tfilter+0x5e1/0xd40
[  314.891151]  rtnetlink_rcv_msg+0x4ab/0x5f0
[  314.891161]  netlink_rcv_skb+0xd0/0x200
[  314.891170]  netlink_unicast+0x296/0x350
[  314.891180]  netlink_sendmsg+0x394/0x600
[  314.891190]  sock_sendmsg+0x96/0xa0
[  314.891200]  ___sys_sendmsg+0x482/0x520
[  314.891208]  __sys_sendmsg+0xba/0x130
[  314.891218]  do_syscall_64+0x74/0xe0
[  314.891228]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[  314.891315] The buggy address belongs to the object at ffff88886c746280
                which belongs to the cache kmalloc-96 of size 96
[  314.891762] The buggy address is located 0 bytes inside of
                96-byte region [ffff88886c746280ffff88886c7462e0)
[  314.892196] The buggy address belongs to the page:
[  314.892387] page:ffffea0021b1d180 refcount:1 mapcount:0 mapping:ffff88835d00ef80 index:0x0
[  314.892398] flags: 0x57ffffc0000200(slab)
[  314.892413] raw: 0057ffffc0000200 ffffea00219e0340 0000000800000008 ffff88835d00ef80
[  314.892423] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[  314.892430] page dumped because: kasan: bad access detected

[  314.892515] Memory state around the buggy address:
[  314.892707]  ffff88886c746180: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[  314.892976]  ffff88886c746200: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[  314.893251] >ffff88886c746280: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[  314.893522]                    ^
[  314.893657]  ffff88886c746300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[  314.893924]  ffff88886c746380: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc
[  314.894189] ==================================================================

Fix the issue by duplicating tunnel info into per-encap copy that is
deallocated with encap structure. Also, duplicate tunnel info in flow parse
attribute to support cases when flow might be attached asynchronously.

Fixes: 1f6da30697d0 ("net/mlx5e: Geneve, Keep tunnel info as pointer to the original struct")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agonet/mlx5: Fix NULL pointer dereference in extended destination
Eli Britstein [Tue, 15 Oct 2019 12:44:18 +0000 (12:44 +0000)]
net/mlx5: Fix NULL pointer dereference in extended destination

The cited commit refactored the encap id into a struct pointed from the
destination.
Bug fix for the case there is no encap for one of the destinations.

Fixes: 2b688ea5efde ("net/mlx5: Add flow steering actions to fs_cmd shim layer")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agonet/mlx5: Fix rtable reference leak
Parav Pandit [Thu, 19 Sep 2019 20:58:14 +0000 (15:58 -0500)]
net/mlx5: Fix rtable reference leak

If the rt entry gateway family is not AF_INET for multipath device,
rtable reference is leaked.
Hence, fix it by releasing the reference.

Fixes: 5fb091e8130b ("net/mlx5e: Use hint to resolve route when in HW multipath mode")
Fixes: e32ee6c78efa ("net/mlx5e: Support tunnel encap over tagged Ethernet")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agonet/mlx5e: Only skip encap flows update when encap init failed
Vlad Buslov [Tue, 24 Sep 2019 07:19:16 +0000 (10:19 +0300)]
net/mlx5e: Only skip encap flows update when encap init failed

When encap entry initialization completes successfully e->compl_result is
set to positive value and not zero, like mlx5e_rep_update_flows() assumes
at the moment. Fix the conditional to only skip encap flows update when
e->compl_result < 0.

Fixes: 2a1f1768fa17 ("net/mlx5e: Refactor neigh update for concurrent execution")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agonet/mlx5e: Replace kfree with kvfree when free vhca stats
Maor Gottlieb [Mon, 16 Sep 2019 10:17:33 +0000 (13:17 +0300)]
net/mlx5e: Replace kfree with kvfree when free vhca stats

Memory allocated by kvzalloc should be freed by kvfree.

Fixes: cef35af34d6d ("net/mlx5e: Add mlx5e HV VHCA stats agent")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agonet/mlx5e: Remove incorrect match criteria assignment line
Dmytro Linkin [Thu, 29 Aug 2019 15:24:27 +0000 (15:24 +0000)]
net/mlx5e: Remove incorrect match criteria assignment line

Driver have function, which enable match criteria for misc parameters
in dependence of eswitch capabilities.

Fixes: 4f5d1beadc10 ("Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agonet/mlx5e: Determine source port properly for vlan push action
Dmytro Linkin [Wed, 4 Sep 2019 12:32:49 +0000 (12:32 +0000)]
net/mlx5e: Determine source port properly for vlan push action

Termination tables are used for vlan push actions on uplink ports.
To support RoCE dual port the source port value was placed in a register.
Fix the code to use an API method returning the source port according to
the FW capabilities.

Fixes: 10caabdaad5a ("net/mlx5e: Use termination table for VLAN push actions")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agonet/mlx5: Fix flow counter list auto bits struct
Roi Dayan [Wed, 11 Sep 2019 11:44:50 +0000 (14:44 +0300)]
net/mlx5: Fix flow counter list auto bits struct

The union should contain the extended dest and counter list.
Remove the resevered 0x40 bits which is redundant.
This change doesn't break any functionally.
Everything works today because the code in fs_cmd.c is using
the correct structs if extended dest or the basic dest.

Fixes: 1b115498598f ("net/mlx5: Introduce extended destination fields")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
5 years agoMerge branch 'VLAN-fixes-for-Ocelot-switch'
David S. Miller [Tue, 29 Oct 2019 23:22:07 +0000 (16:22 -0700)]
Merge branch 'VLAN-fixes-for-Ocelot-switch'

Vladimir Oltean says:

====================
VLAN fixes for Ocelot switch

This series addresses 2 issues with vlan_filtering=1:
- Untagged traffic gets dropped unless commands are run in a very
  specific order.
- Untagged traffic starts being transmitted as tagged after adding
  another untagged VID on the port.

Tested on NXP LS1028A-RDB board.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: mscc: ocelot: refuse to overwrite the port's native vlan
Vladimir Oltean [Sat, 26 Oct 2019 18:04:27 +0000 (21:04 +0300)]
net: mscc: ocelot: refuse to overwrite the port's native vlan

The switch driver keeps a "vid" variable per port, which signifies _the_
VLAN ID that is stripped on that port's egress (aka the native VLAN on a
trunk port).

That is the way the hardware is designed (mostly). The port->vid is
programmed into REW:PORT:PORT_VLAN_CFG:PORT_VID and the rewriter is told
to send all traffic as tagged except the one having port->vid.

There exists a possibility of finer-grained egress untagging decisions:
using the VCAP IS1 engine, one rule can be added to match every
VLAN-tagged frame whose VLAN should be untagged, and set POP_CNT=1 as
action. However, the IS1 can hold at most 512 entries, and the VLANs are
in the order of 6 * 4096.

So the code is fine for now. But this sequence of commands:

$ bridge vlan add dev swp0 vid 1 pvid untagged
$ bridge vlan add dev swp0 vid 2 untagged

makes untagged and pvid-tagged traffic be sent out of swp0 as tagged
with VID 1, despite user's request.

Prevent that from happening. The user should temporarily remove the
existing untagged VLAN (1 in this case), add it back as tagged, and then
add the new untagged VLAN (2 in this case).

Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up
Vladimir Oltean [Sat, 26 Oct 2019 18:04:26 +0000 (21:04 +0300)]
net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up

Background information: the driver operates the hardware in a mode where
a single VLAN can be transmitted as untagged on a particular egress
port. That is the "native VLAN on trunk port" use case. Its value is
held in port->vid.

Consider the following command sequence (no network manager, all
interfaces are down, debugging prints added by me):

$ ip link add dev br0 type bridge vlan_filtering 1
$ ip link set dev swp0 master br0

Kernel code path during last command:

br_add_slave -> ocelot_netdevice_port_event (NETDEV_CHANGEUPPER):
[   21.401901] ocelot_vlan_port_apply: port 0 vlan aware 0 pvid 0 vid 0

br_add_slave -> nbp_vlan_init -> switchdev_port_attr_set -> ocelot_port_attr_set (SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING):
[   21.413335] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 0 vid 0

br_add_slave -> nbp_vlan_init -> nbp_vlan_add -> br_switchdev_port_vlan_add -> switchdev_port_obj_add -> ocelot_port_obj_add -> ocelot_vlan_vid_add
[   21.667421] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 1

So far so good. The bridge has replaced the driver's default pvid used
in standalone mode (0) with its own default_pvid (1). The port's vid
(native VLAN) has also changed from 0 to 1.

$ ip link set dev swp0 up

[   31.722956] 8021q: adding VLAN 0 to HW filter on device swp0
do_setlink -> dev_change_flags -> vlan_vid_add -> ocelot_vlan_rx_add_vid -> ocelot_vlan_vid_add:
[   31.728700] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 0

The 8021q module uses the .ndo_vlan_rx_add_vid API on .ndo_open to make
ports be able to transmit and receive 802.1p-tagged traffic by default.
This API is supposed to offload a VLAN sub-interface, which for a switch
port means to add a VLAN that is not a pvid, and tagged on egress.

But the driver implementation of .ndo_vlan_rx_add_vid is wrong: it adds
back vid 0 as "egress untagged". Now back to the initial paragraph:
there is a single untagged VID that the driver keeps track of, and that
has just changed from 1 (the pvid) to 0. So this breaks the bridge
core's expectation, because it has changed vid 1 from untagged to
tagged, when what the user sees is.

$ bridge vlan
port    vlan ids
swp0     1 PVID Egress Untagged

br0      1 PVID Egress Untagged

But curiously, instead of manifesting itself as "untagged and
pvid-tagged traffic gets sent as tagged on egress", the bug:

- is hidden when vlan_filtering=0
- manifests as dropped traffic when vlan_filtering=1, due to this setting:

if (port->vlan_aware && !port->vid)
/* If port is vlan-aware and tagged, drop untagged and priority
 * tagged frames.
 */
val |= ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
       ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
       ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA;

which would have made sense if it weren't for this bug. The setting's
intention was "this is a trunk port with no native VLAN, so don't accept
untagged traffic". So the driver was never expecting to set VLAN 0 as
the value of the native VLAN, 0 was just encoding for "invalid".

So the fix is to not send 802.1p traffic as untagged, because that would
change the port's native vlan to 0, unbeknownst to the bridge, and
trigger unexpected code paths in the driver.

Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agowimax: i2400: Fix memory leak in i2400m_op_rfkill_sw_toggle
Navid Emamdoost [Sat, 26 Oct 2019 04:53:30 +0000 (23:53 -0500)]
wimax: i2400: Fix memory leak in i2400m_op_rfkill_sw_toggle

In the implementation of i2400m_op_rfkill_sw_toggle() the allocated
buffer for cmd should be released before returning. The
documentation for i2400m_msg_to_dev() says when it returns the buffer
can be reused. Meaning cmd should be released in either case. Move
kfree(cmd) before return to be reached by all execution paths.

Fixes: 2507e6ab7a9a ("wimax: i2400: fix memory leak")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hisilicon: Fix "Trying to free already-free IRQ"
Jiangfeng Xiao [Fri, 25 Oct 2019 13:48:22 +0000 (21:48 +0800)]
net: hisilicon: Fix "Trying to free already-free IRQ"

When rmmod hip04_eth.ko, we can get the following warning:

Task track: rmmod(1623)>bash(1591)>login(1581)>init(1)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1623 at kernel/irq/manage.c:1557 __free_irq+0xa4/0x2ac()
Trying to free already-free IRQ 200
Modules linked in: ping(O) pramdisk(O) cpuinfo(O) rtos_snapshot(O) interrupt_ctrl(O) mtdblock mtd_blkdevrtfs nfs_acl nfs lockd grace sunrpc xt_tcpudp ipt_REJECT iptable_filter ip_tables x_tables nf_reject_ipv
CPU: 0 PID: 1623 Comm: rmmod Tainted: G           O    4.4.193 #1
Hardware name: Hisilicon A15
[<c020b408>] (rtos_unwind_backtrace) from [<c0206624>] (show_stack+0x10/0x14)
[<c0206624>] (show_stack) from [<c03f2be4>] (dump_stack+0xa0/0xd8)
[<c03f2be4>] (dump_stack) from [<c021a780>] (warn_slowpath_common+0x84/0xb0)
[<c021a780>] (warn_slowpath_common) from [<c021a7e8>] (warn_slowpath_fmt+0x3c/0x68)
[<c021a7e8>] (warn_slowpath_fmt) from [<c026876c>] (__free_irq+0xa4/0x2ac)
[<c026876c>] (__free_irq) from [<c0268a14>] (free_irq+0x60/0x7c)
[<c0268a14>] (free_irq) from [<c0469e80>] (release_nodes+0x1c4/0x1ec)
[<c0469e80>] (release_nodes) from [<c0466924>] (__device_release_driver+0xa8/0x104)
[<c0466924>] (__device_release_driver) from [<c0466a80>] (driver_detach+0xd0/0xf8)
[<c0466a80>] (driver_detach) from [<c0465e18>] (bus_remove_driver+0x64/0x8c)
[<c0465e18>] (bus_remove_driver) from [<c02935b0>] (SyS_delete_module+0x198/0x1e0)
[<c02935b0>] (SyS_delete_module) from [<c0202ed0>] (__sys_trace_return+0x0/0x10)
---[ end trace bb25d6123d849b44 ]---

Currently "rmmod hip04_eth.ko" call free_irq more than once
as devres_release_all and hip04_remove both call free_irq.
This results in a 'Trying to free already-free IRQ' warning.
To solve the problem free_irq has been moved out of hip04_remove.

Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agofjes: Handle workqueue allocation failure
Will Deacon [Fri, 25 Oct 2019 11:06:02 +0000 (12:06 +0100)]
fjes: Handle workqueue allocation failure

In the highly unlikely event that we fail to allocate either of the
"/txrx" or "/control" workqueues, we should bail cleanly rather than
blindly march on with NULL queue pointer(s) installed in the
'fjes_adapter' instance.

Cc: "David S. Miller" <davem@davemloft.net>
Reported-by: Nicolas Waisman <nico@semmle.com>
Link: https://lore.kernel.org/lkml/CADJ_3a8WFrs5NouXNqS5WYe7rebFP+_A5CheeqAyD_p7DFJJcg@mail.gmail.com/
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge tag 'batadv-net-for-davem-20191025' of git://git.open-mesh.org/linux-merge
David S. Miller [Mon, 28 Oct 2019 23:39:07 +0000 (16:39 -0700)]
Merge tag 'batadv-net-for-davem-20191025' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are two batman-adv bugfixes:

 * Fix free/alloc race for OGM and OGMv2, by Sven Eckelmann (2 patches)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: usb: lan78xx: Disable interrupts before calling generic_handle_irq()
Daniel Wagner [Fri, 25 Oct 2019 08:04:13 +0000 (10:04 +0200)]
net: usb: lan78xx: Disable interrupts before calling generic_handle_irq()

lan78xx_status() will run with interrupts enabled due to the change in
ed194d136769 ("usb: core: remove local_irq_save() around ->complete()
handler"). generic_handle_irq() expects to be run with IRQs disabled.

[    4.886203] 000: irq 79 handler irq_default_primary_handler+0x0/0x8 enabled interrupts
[    4.886243] 000: WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:152 __handle_irq_event_percpu+0x154/0x168
[    4.896294] 000: Modules linked in:
[    4.896301] 000: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.6 #39
[    4.896310] 000: Hardware name: Raspberry Pi 3 Model B+ (DT)
[    4.896315] 000: pstate: 60000005 (nZCv daif -PAN -UAO)
[    4.896321] 000: pc : __handle_irq_event_percpu+0x154/0x168
[    4.896331] 000: lr : __handle_irq_event_percpu+0x154/0x168
[    4.896339] 000: sp : ffff000010003cc0
[    4.896346] 000: x29: ffff000010003cc0 x28: 0000000000000060
[    4.896355] 000: x27: ffff000011021980 x26: ffff00001189c72b
[    4.896364] 000: x25: ffff000011702bc0 x24: ffff800036d6e400
[    4.896373] 000: x23: 000000000000004f x22: ffff000010003d64
[    4.896381] 000: x21: 0000000000000000 x20: 0000000000000002
[    4.896390] 000: x19: ffff8000371c8480 x18: 0000000000000060
[    4.896398] 000: x17: 0000000000000000 x16: 00000000000000eb
[    4.896406] 000: x15: ffff000011712d18 x14: 7265746e69206465
[    4.896414] 000: x13: ffff000010003ba0 x12: ffff000011712df0
[    4.896422] 000: x11: 0000000000000001 x10: ffff000011712e08
[    4.896430] 000: x9 : 0000000000000001 x8 : 000000000003c920
[    4.896437] 000: x7 : ffff0000118cc410 x6 : ffff0000118c7f00
[    4.896445] 000: x5 : 000000000003c920 x4 : 0000000000004510
[    4.896453] 000: x3 : ffff000011712dc8 x2 : 0000000000000000
[    4.896461] 000: x1 : 73a3f67df94c1500 x0 : 0000000000000000
[    4.896466] 000: Call trace:
[    4.896471] 000:  __handle_irq_event_percpu+0x154/0x168
[    4.896481] 000:  handle_irq_event_percpu+0x50/0xb0
[    4.896489] 000:  handle_irq_event+0x40/0x98
[    4.896497] 000:  handle_simple_irq+0xa4/0xf0
[    4.896505] 000:  generic_handle_irq+0x24/0x38
[    4.896513] 000:  intr_complete+0xb0/0xe0
[    4.896525] 000:  __usb_hcd_giveback_urb+0x58/0xd8
[    4.896533] 000:  usb_giveback_urb_bh+0xd0/0x170
[    4.896539] 000:  tasklet_action_common.isra.0+0x9c/0x128
[    4.896549] 000:  tasklet_hi_action+0x24/0x30
[    4.896556] 000:  __do_softirq+0x120/0x23c
[    4.896564] 000:  irq_exit+0xb8/0xd8
[    4.896571] 000:  __handle_domain_irq+0x64/0xb8
[    4.896579] 000:  bcm2836_arm_irqchip_handle_irq+0x60/0xc0
[    4.896586] 000:  el1_irq+0xb8/0x140
[    4.896592] 000:  arch_cpu_idle+0x10/0x18
[    4.896601] 000:  do_idle+0x200/0x280
[    4.896608] 000:  cpu_startup_entry+0x20/0x28
[    4.896615] 000:  rest_init+0xb4/0xc0
[    4.896623] 000:  arch_call_rest_init+0xc/0x14
[    4.896632] 000:  start_kernel+0x454/0x480

Fixes: ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler")
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stefan Wahren <wahrenst@gmx.net>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: dsa: sja1105: improve NET_DSA_SJA1105_TAS dependency
Arnd Bergmann [Fri, 25 Oct 2019 07:26:35 +0000 (09:26 +0200)]
net: dsa: sja1105: improve NET_DSA_SJA1105_TAS dependency

An earlier bugfix introduced a dependency on CONFIG_NET_SCH_TAPRIO,
but this missed the case of NET_SCH_TAPRIO=m and NET_DSA_SJA1105=y,
which still causes a link error:

drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_setup_tc_taprio':
sja1105_tas.c:(.text+0x5c): undefined reference to `taprio_offload_free'
sja1105_tas.c:(.text+0x3b4): undefined reference to `taprio_offload_get'
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_tas_teardown':
sja1105_tas.c:(.text+0x6ec): undefined reference to `taprio_offload_free'

Change the dependency to only allow selecting the TAS code when it
can link against the taprio code.

Fixes: a8d570de0cc6 ("net: dsa: sja1105: Add dependency for NET_DSA_SJA1105_TAS")
Fixes: 317ab5b86c8e ("net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: ethernet: ftgmac100: Fix DMA coherency issue with SW checksum
Benjamin Herrenschmidt [Fri, 25 Oct 2019 02:47:24 +0000 (13:47 +1100)]
net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksum

We are calling the checksum helper after the dma_map_single()
call to map the packet. This is incorrect as the checksumming
code will touch the packet from the CPU. This means the cache
won't be properly flushes (or the bounce buffering will leave
us with the unmodified packet to DMA).

This moves the calculation of the checksum & vlan tags to
before the DMA mapping.

This also has the side effect of fixing another bug: If the
checksum helper fails, we goto "drop" to drop the packet, which
will not unmap the DMA mapping.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes: 05690d633f30 ("ftgmac100: Upgrade to NETIF_F_HW_CSUM")
Reviewed-by: Vijay Khemka <vijaykhemka@fb.com>
Tested-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: fix sk_page_frag() recursion from memory reclaim
Tejun Heo [Thu, 24 Oct 2019 20:50:27 +0000 (13:50 -0700)]
net: fix sk_page_frag() recursion from memory reclaim

sk_page_frag() optimizes skb_frag allocations by using per-task
skb_frag cache when it knows it's the only user.  The condition is
determined by seeing whether the socket allocation mask allows
blocking - if the allocation may block, it obviously owns the task's
context and ergo exclusively owns current->task_frag.

Unfortunately, this misses recursion through memory reclaim path.
Please take a look at the following backtrace.

 [2] RIP: 0010:tcp_sendmsg_locked+0xccf/0xe10
     ...
     tcp_sendmsg+0x27/0x40
     sock_sendmsg+0x30/0x40
     sock_xmit.isra.24+0xa1/0x170 [nbd]
     nbd_send_cmd+0x1d2/0x690 [nbd]
     nbd_queue_rq+0x1b5/0x3b0 [nbd]
     __blk_mq_try_issue_directly+0x108/0x1b0
     blk_mq_request_issue_directly+0xbd/0xe0
     blk_mq_try_issue_list_directly+0x41/0xb0
     blk_mq_sched_insert_requests+0xa2/0xe0
     blk_mq_flush_plug_list+0x205/0x2a0
     blk_flush_plug_list+0xc3/0xf0
 [1] blk_finish_plug+0x21/0x2e
     _xfs_buf_ioapply+0x313/0x460
     __xfs_buf_submit+0x67/0x220
     xfs_buf_read_map+0x113/0x1a0
     xfs_trans_read_buf_map+0xbf/0x330
     xfs_btree_read_buf_block.constprop.42+0x95/0xd0
     xfs_btree_lookup_get_block+0x95/0x170
     xfs_btree_lookup+0xcc/0x470
     xfs_bmap_del_extent_real+0x254/0x9a0
     __xfs_bunmapi+0x45c/0xab0
     xfs_bunmapi+0x15/0x30
     xfs_itruncate_extents_flags+0xca/0x250
     xfs_free_eofblocks+0x181/0x1e0
     xfs_fs_destroy_inode+0xa8/0x1b0
     destroy_inode+0x38/0x70
     dispose_list+0x35/0x50
     prune_icache_sb+0x52/0x70
     super_cache_scan+0x120/0x1a0
     do_shrink_slab+0x120/0x290
     shrink_slab+0x216/0x2b0
     shrink_node+0x1b6/0x4a0
     do_try_to_free_pages+0xc6/0x370
     try_to_free_mem_cgroup_pages+0xe3/0x1e0
     try_charge+0x29e/0x790
     mem_cgroup_charge_skmem+0x6a/0x100
     __sk_mem_raise_allocated+0x18e/0x390
     __sk_mem_schedule+0x2a/0x40
 [0] tcp_sendmsg_locked+0x8eb/0xe10
     tcp_sendmsg+0x27/0x40
     sock_sendmsg+0x30/0x40
     ___sys_sendmsg+0x26d/0x2b0
     __sys_sendmsg+0x57/0xa0
     do_syscall_64+0x42/0x100
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

In [0], tcp_send_msg_locked() was using current->page_frag when it
called sk_wmem_schedule().  It already calculated how many bytes can
be fit into current->page_frag.  Due to memory pressure,
sk_wmem_schedule() called into memory reclaim path which called into
xfs and then IO issue path.  Because the filesystem in question is
backed by nbd, the control goes back into the tcp layer - back into
tcp_sendmsg_locked().

nbd sets sk_allocation to (GFP_NOIO | __GFP_MEMALLOC) which makes
sense - it's in the process of freeing memory and wants to be able to,
e.g., drop clean pages to make forward progress.  However, this
confused sk_page_frag() called from [2].  Because it only tests
whether the allocation allows blocking which it does, it now thinks
current->page_frag can be used again although it already was being
used in [0].

After [2] used current->page_frag, the offset would be increased by
the used amount.  When the control returns to [0],
current->page_frag's offset is increased and the previously calculated
number of bytes now may overrun the end of allocated memory leading to
silent memory corruptions.

Fix it by adding gfpflags_normal_context() which tests sleepable &&
!reclaim and use it to determine whether to use current->task_frag.

v2: Eric didn't like gfp flags being tested twice.  Introduce a new
    helper gfpflags_normal_context() and combine the two tests.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoudp: fix data-race in udp_set_dev_scratch()
Eric Dumazet [Thu, 24 Oct 2019 18:43:31 +0000 (11:43 -0700)]
udp: fix data-race in udp_set_dev_scratch()

KCSAN reported a data-race in udp_set_dev_scratch() [1]

The issue here is that we must not write over skb fields
if skb is shared. A similar issue has been fixed in commit
89c22d8c3b27 ("net: Fix skb csum races when peeking")

While we are at it, use a helper only dealing with
udp_skb_scratch(skb)->csum_unnecessary, as this allows
udp_set_dev_scratch() to be called once and thus inlined.

[1]
BUG: KCSAN: data-race in udp_set_dev_scratch / udpv6_recvmsg

write to 0xffff888120278317 of 1 bytes by task 10411 on cpu 1:
 udp_set_dev_scratch+0xea/0x200 net/ipv4/udp.c:1308
 __first_packet_length+0x147/0x420 net/ipv4/udp.c:1556
 first_packet_length+0x68/0x2a0 net/ipv4/udp.c:1579
 udp_poll+0xea/0x110 net/ipv4/udp.c:2720
 sock_poll+0xed/0x250 net/socket.c:1256
 vfs_poll include/linux/poll.h:90 [inline]
 do_select+0x7d0/0x1020 fs/select.c:534
 core_sys_select+0x381/0x550 fs/select.c:677
 do_pselect.constprop.0+0x11d/0x160 fs/select.c:759
 __do_sys_pselect6 fs/select.c:784 [inline]
 __se_sys_pselect6 fs/select.c:769 [inline]
 __x64_sys_pselect6+0x12e/0x170 fs/select.c:769
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff888120278317 of 1 bytes by task 10413 on cpu 0:
 udp_skb_csum_unnecessary include/net/udp.h:358 [inline]
 udpv6_recvmsg+0x43e/0xe90 net/ipv6/udp.c:310
 inet6_recvmsg+0xbb/0x240 net/ipv6/af_inet6.c:592
 sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
 __do_sys_recvmmsg net/socket.c:2703 [inline]
 __se_sys_recvmmsg net/socket.c:2696 [inline]
 __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10413 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: dpaa2: Use the correct style for SPDX License Identifier
Nishad Kamdar [Thu, 24 Oct 2019 15:12:00 +0000 (20:42 +0530)]
net: dpaa2: Use the correct style for SPDX License Identifier

This patch corrects the SPDX License Identifier style in
header files related to DPAA2 Ethernet driver supporting
Freescale SoCs with DPAA2. For C header files
Documentation/process/license-rules.rst mandates C-like comments
(opposed to C source files where C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'net-avoid-KCSAN-splats'
David S. Miller [Mon, 28 Oct 2019 20:33:41 +0000 (13:33 -0700)]
Merge branch 'net-avoid-KCSAN-splats'

Eric Dumazet says:

====================
net: avoid KCSAN splats

Often times we use skb_queue_empty() without holding a lock,
meaning that other cpus (or interrupt) can change the queue
under us. This is fine, but we need to properly annotate
the lockless intent to make sure the compiler wont over
optimize things.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: add READ_ONCE() annotation in __skb_wait_for_more_packets()
Eric Dumazet [Thu, 24 Oct 2019 05:44:52 +0000 (22:44 -0700)]
net: add READ_ONCE() annotation in __skb_wait_for_more_packets()

__skb_wait_for_more_packets() can be called while other cpus
can feed packets to the socket receive queue.

KCSAN reported :

BUG: KCSAN: data-race in __skb_wait_for_more_packets / __udp_enqueue_schedule_skb

write to 0xffff888102e40b58 of 8 bytes by interrupt on cpu 0:
 __skb_insert include/linux/skbuff.h:1852 [inline]
 __skb_queue_before include/linux/skbuff.h:1958 [inline]
 __skb_queue_tail include/linux/skbuff.h:1991 [inline]
 __udp_enqueue_schedule_skb+0x2d7/0x410 net/ipv4/udp.c:1470
 __udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline]
 udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057
 udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074
 udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233
 __udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300
 udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470
 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955

read to 0xffff888102e40b58 of 8 bytes by task 13035 on cpu 1:
 __skb_wait_for_more_packets+0xfa/0x320 net/core/datagram.c:100
 __skb_recv_udp+0x374/0x500 net/ipv4/udp.c:1683
 udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712
 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
 sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
 __do_sys_recvmmsg net/socket.c:2703 [inline]
 __se_sys_recvmmsg net/socket.c:2696 [inline]
 __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 13035 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: use skb_queue_empty_lockless() in busy poll contexts
Eric Dumazet [Thu, 24 Oct 2019 05:44:51 +0000 (22:44 -0700)]
net: use skb_queue_empty_lockless() in busy poll contexts

Busy polling usually runs without locks.
Let's use skb_queue_empty_lockless() instead of skb_queue_empty()

Also uses READ_ONCE() in __skb_try_recv_datagram() to address
a similar potential problem.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: use skb_queue_empty_lockless() in poll() handlers
Eric Dumazet [Thu, 24 Oct 2019 05:44:50 +0000 (22:44 -0700)]
net: use skb_queue_empty_lockless() in poll() handlers

Many poll() handlers are lockless. Using skb_queue_empty_lockless()
instead of skb_queue_empty() is more appropriate.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoudp: use skb_queue_empty_lockless()
Eric Dumazet [Thu, 24 Oct 2019 05:44:49 +0000 (22:44 -0700)]
udp: use skb_queue_empty_lockless()

syzbot reported a data-race [1].

We should use skb_queue_empty_lockless() to document that we are
not ensuring a mutual exclusion and silence KCSAN.

[1]
BUG: KCSAN: data-race in __skb_recv_udp / __udp_enqueue_schedule_skb

write to 0xffff888122474b50 of 8 bytes by interrupt on cpu 0:
 __skb_insert include/linux/skbuff.h:1852 [inline]
 __skb_queue_before include/linux/skbuff.h:1958 [inline]
 __skb_queue_tail include/linux/skbuff.h:1991 [inline]
 __udp_enqueue_schedule_skb+0x2c1/0x410 net/ipv4/udp.c:1470
 __udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline]
 udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057
 udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074
 udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233
 __udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300
 udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470
 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955

read to 0xffff888122474b50 of 8 bytes by task 8921 on cpu 1:
 skb_queue_empty include/linux/skbuff.h:1494 [inline]
 __skb_recv_udp+0x18d/0x500 net/ipv4/udp.c:1653
 udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712
 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
 sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
 __do_sys_recvmmsg net/socket.c:2703 [inline]
 __se_sys_recvmmsg net/socket.c:2696 [inline]
 __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 8921 Comm: syz-executor.4 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: add skb_queue_empty_lockless()
Eric Dumazet [Thu, 24 Oct 2019 05:44:48 +0000 (22:44 -0700)]
net: add skb_queue_empty_lockless()

Some paths call skb_queue_empty() without holding
the queue lock. We must use a barrier in order
to not let the compiler do strange things, and avoid
KCSAN splats.

Adding a barrier in skb_queue_empty() might be overkill,
I prefer adding a new helper to clearly identify
points where the callers might be lockless. This might
help us finding real bugs.

The corresponding WRITE_ONCE() should add zero cost
for current compilers.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
David S. Miller [Sun, 27 Oct 2019 19:13:16 +0000 (12:13 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for net:

1) Fix crash on flowtable due to race between garbage collection
   and insertion.

2) Restore callback unbinding in netfilter offloads.

3) Fix races on IPVS module removal, from Davide Caratti.

4) Make old_secure_tcp per-netns to fix sysbot report,
   from Eric Dumazet.

5) Validate matching length in netfilter offloads, from wenxu.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
David S. Miller [Sun, 27 Oct 2019 01:30:55 +0000 (18:30 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2019-10-27

The following pull-request contains BPF updates for your *net* tree.

We've added 7 non-merge commits during the last 11 day(s) which contain
a total of 7 files changed, 66 insertions(+), 16 deletions(-).

The main changes are:

1) Fix two use-after-free bugs in relation to RCU in jited symbol exposure to
   kallsyms, from Daniel Borkmann.

2) Fix NULL pointer dereference in AF_XDP rx-only sockets, from Magnus Karlsson.

3) Fix hang in netdev unregister for hash based devmap as well as another overflow
   bug on 32 bit archs in memlock cost calculation, from Toke Høiland-Jørgensen.

4) Fix wrong memory access in LWT BPF programs on reroute due to invalid dst.
   Also fix BPF selftests to use more compatible nc options, from Jiri Benc.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'ipv4-fix-route-update-on-metric-change'
David S. Miller [Sat, 26 Oct 2019 18:25:53 +0000 (11:25 -0700)]
Merge branch 'ipv4-fix-route-update-on-metric-change'

Paolo Abeni says:

====================
ipv4: fix route update on metric change.

This fixes connected route update on some edge cases for ip addr metric
change.
It additionally includes self tests for the covered scenarios. The new tests
fail on unpatched kernels and pass on the patched one.

v1 -> v2:
 - add selftests
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoselftests: fib_tests: add more tests for metric update
Paolo Abeni [Sat, 26 Oct 2019 09:53:40 +0000 (11:53 +0200)]
selftests: fib_tests: add more tests for metric update

This patch adds two more tests to ipv4_addr_metric_test() to
explicitly cover the scenarios fixed by the previous patch.

Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoipv4: fix route update on metric change.
Paolo Abeni [Sat, 26 Oct 2019 09:53:39 +0000 (11:53 +0200)]
ipv4: fix route update on metric change.

Since commit af4d768ad28c ("net/ipv4: Add support for specifying metric
of connected routes"), when updating an IP address with a different metric,
the associated connected route is updated, too.

Still, the mentioned commit doesn't handle properly some corner cases:

$ ip addr add dev eth0 192.168.1.0/24
$ ip addr add dev eth0 192.168.2.1/32 peer 192.168.2.2
$ ip addr add dev eth0 192.168.3.1/24
$ ip addr change dev eth0 192.168.1.0/24 metric 10
$ ip addr change dev eth0 192.168.2.1/32 peer 192.168.2.2 metric 10
$ ip addr change dev eth0 192.168.3.1/24 metric 10
$ ip -4 route
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.0
192.168.2.2 dev eth0 proto kernel scope link src 192.168.2.1
192.168.3.0/24 dev eth0 proto kernel scope link src 192.168.2.1 metric 10

Only the last route is correctly updated.

The problem is the current test in fib_modify_prefix_metric():

if (!(dev->flags & IFF_UP) ||
    ifa->ifa_flags & (IFA_F_SECONDARY | IFA_F_NOPREFIXROUTE) ||
    ipv4_is_zeronet(prefix) ||
    prefix == ifa->ifa_local || ifa->ifa_prefixlen == 32)

Which should be the logical 'not' of the pre-existing test in
fib_add_ifaddr():

if (!ipv4_is_zeronet(prefix) && !(ifa->ifa_flags & IFA_F_SECONDARY) &&
    (prefix != addr || ifa->ifa_prefixlen < 32))

To properly negate the original expression, we need to change the last
logical 'or' to a logical 'and'.

Fixes: af4d768ad28c ("net/ipv4: Add support for specifying metric of connected routes")
Reported-and-suggested-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: Zeroing the structure ethtool_wolinfo in ethtool_get_wol()
zhanglin [Sat, 26 Oct 2019 07:54:16 +0000 (15:54 +0800)]
net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol()

memset() the structure ethtool_wolinfo that has padded bytes
but the padded bytes have not been zeroed out.

Signed-off-by: zhanglin <zhang.lin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge tag 'ipvs-fixes-for-v5.4' of https://git.kernel.org/pub/scm/linux/kernel/git...
Pablo Neira Ayuso [Sat, 26 Oct 2019 10:42:45 +0000 (12:42 +0200)]
Merge tag 'ipvs-fixes-for-v5.4' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs

Simon Horman says:

====================
IPVS fixes for v5.4

* Eric Dumazet resolves a race condition in switching the defense level
* Davide Caratti resolves a race condition in module removal
====================

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
5 years agocxgb4: request the TX CIDX updates to status page
Raju Rangoju [Wed, 23 Oct 2019 17:33:55 +0000 (23:03 +0530)]
cxgb4: request the TX CIDX updates to status page

For adapters which support the SGE Doorbell Queue Timer facility,
we configured the Ethernet TX Queues to send CIDX Updates to the
Associated Ethernet RX Response Queue with CPL_SGE_EGR_UPDATE
messages to allow us to respond more quickly to the CIDX Updates.
But, this was adding load to PCIe Link RX bandwidth and,
potentially, resulting in higher CPU Interrupt load.

This patch requests the HW to deliver the CIDX updates to the TX
queue status page rather than generating an ingress queue message
(as an interrupt). With this patch, the load on RX bandwidth is
reduced and a substantial improvement in BW is noticed at lower
IO sizes.

Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonetns: fix GFP flags in rtnl_net_notifyid()
Guillaume Nault [Wed, 23 Oct 2019 16:39:04 +0000 (18:39 +0200)]
netns: fix GFP flags in rtnl_net_notifyid()

In rtnl_net_notifyid(), we certainly can't pass a null GFP flag to
rtnl_notify(). A GFP_KERNEL flag would be fine in most circumstances,
but there are a few paths calling rtnl_net_notifyid() from atomic
context or from RCU critical sections. The later also precludes the use
of gfp_any() as it wouldn't detect the RCU case. Also, the nlmsg_new()
call is wrong too, as it uses GFP_KERNEL unconditionally.

Therefore, we need to pass the GFP flags as parameter and propagate it
through function calls until the proper flags can be determined.

In most cases, GFP_KERNEL is fine. The exceptions are:
  * openvswitch: ovs_vport_cmd_get() and ovs_vport_cmd_dump()
    indirectly call rtnl_net_notifyid() from RCU critical section,

  * rtnetlink: rtmsg_ifinfo_build_skb() already receives GFP flags as
    parameter.

Also, in ovs_vport_cmd_build_info(), let's change the GFP flags used
by nlmsg_new(). The function is allowed to sleep, so better make the
flags consistent with the ones used in the following
ovs_vport_cmd_fill_info() call.

Found by code inspection.

Fixes: 9a9634545c70 ("netns: notify netns id events")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: ethernet: Use the correct style for SPDX License Identifier
Nishad Kamdar [Wed, 23 Oct 2019 15:26:38 +0000 (20:56 +0530)]
net: ethernet: Use the correct style for SPDX License Identifier

This patch corrects the SPDX License Identifier style in
header file related to ethernet driver for Cortina Gemini
devices. For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'smc-fixes'
David S. Miller [Sat, 26 Oct 2019 02:18:21 +0000 (19:18 -0700)]
Merge branch 'smc-fixes'

Karsten Graul says:

====================
net/smc: fixes for -net

Fixes for the net tree, covering a memleak when closing
SMC fallback sockets and fix SMC-R connection establishment
when vlan-ids are used.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet/smc: keep vlan_id for SMC-R in smc_listen_work()
Ursula Braun [Wed, 23 Oct 2019 13:44:06 +0000 (15:44 +0200)]
net/smc: keep vlan_id for SMC-R in smc_listen_work()

Creating of an SMC-R connection with vlan-id fails, because
smc_listen_work() determines the vlan_id of the connection,
saves it in struct smc_init_info ini, but clears the ini area
again if SMC-D is not applicable.
This patch just resets the ISM device before investigating
SMC-R availability.

Fixes: bc36d2fc93eb ("net/smc: consolidate function parameters")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet/smc: fix closing of fallback SMC sockets
Ursula Braun [Wed, 23 Oct 2019 13:44:05 +0000 (15:44 +0200)]
net/smc: fix closing of fallback SMC sockets

For SMC sockets forced to fallback to TCP, the file is propagated
from the outer SMC to the internal TCP socket. When closing the SMC
socket, the internal TCP socket file pointer must be restored to the
original NULL value, otherwise memory leaks may show up (found with
CONFIG_DEBUG_KMEMLEAK).

The internal TCP socket is released in smc_clcsock_release(), which
calls __sock_release() function in net/socket.c. This calls the
needed iput(SOCK_INODE(sock)) only, if the file pointer has been reset
to the original NULL-value.

Fixes: 07603b230895 ("net/smc: propagate file from SMC to TCP socket")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: hwbm: if CONFIG_NET_HWBM unset, make stub functions static
Ben Dooks (Codethink) [Wed, 23 Oct 2019 10:01:39 +0000 (11:01 +0100)]
net: hwbm: if CONFIG_NET_HWBM unset, make stub functions static

If CONFIG_NET_HWBM is not set, then these stub functions in
<net/hwbm.h> should be declared static to avoid trying to
export them from any driver that includes this.

Fixes the following sparse warnings:

./include/net/hwbm.h:24:6: warning: symbol 'hwbm_buf_free' was not declared. Should it be static?
./include/net/hwbm.h:25:5: warning: symbol 'hwbm_pool_refill' was not declared. Should it be static?
./include/net/hwbm.h:26:5: warning: symbol 'hwbm_pool_add' was not declared. Should it be static?

Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: mvneta: make stub functions static inline
Ben Dooks (Codethink) [Wed, 23 Oct 2019 10:01:08 +0000 (11:01 +0100)]
net: mvneta: make stub functions static inline

If the CONFIG_MVNET_BA is not set, then make the stub functions
static inline to avoid trying to export them, and remove hte
following sparse warnings:

drivers/net/ethernet/marvell/mvneta_bm.h:163:6: warning: symbol 'mvneta_bm_pool_destroy' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:165:6: warning: symbol 'mvneta_bm_bufs_free' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:167:5: warning: symbol 'mvneta_bm_construct' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:168:5: warning: symbol 'mvneta_bm_pool_refill' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:170:23: warning: symbol 'mvneta_bm_pool_use' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:181:18: warning: symbol 'mvneta_bm_get' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:182:6: warning: symbol 'mvneta_bm_put' was not declared. Should it be static?

Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: sch_generic: Use pfifo_fast as fallback scheduler for CAN hardware
Vincent Prince [Tue, 22 Oct 2019 15:09:50 +0000 (17:09 +0200)]
net: sch_generic: Use pfifo_fast as fallback scheduler for CAN hardware

There is networking hardware that isn't based on Ethernet for layers 1 and 2.

For example CAN.

CAN is a multi-master serial bus standard for connecting Electronic Control
Units [ECUs] also known as nodes. A frame on the CAN bus carries up to 8 bytes
of payload. Frame corruption is detected by a CRC. However frame loss due to
corruption is possible, but a quite unusual phenomenon.

While fq_codel works great for TCP/IP, it doesn't for CAN. There are a lot of
legacy protocols on top of CAN, which are not build with flow control or high
CAN frame drop rates in mind.

When using fq_codel, as soon as the queue reaches a certain delay based length,
skbs from the head of the queue are silently dropped. Silently meaning that the
user space using a send() or similar syscall doesn't get an error. However
TCP's flow control algorithm will detect dropped packages and adjust the
bandwidth accordingly.

When using fq_codel and sending raw frames over CAN, which is the common use
case, the user space thinks the package has been sent without problems, because
send() returned without an error. pfifo_fast will drop skbs, if the queue
length exceeds the maximum. But with this scheduler the skbs at the tail are
dropped, an error (-ENOBUFS) is propagated to user space. So that the user
space can slow down the package generation.

On distributions, where fq_codel is made default via CONFIG_DEFAULT_NET_SCH
during compile time, or set default during runtime with sysctl
net.core.default_qdisc (see [1]), we get a bad user experience. In my test case
with pfifo_fast, I can transfer thousands of million CAN frames without a frame
drop. On the other hand with fq_codel there is more then one lost CAN frame per
thousand frames.

As pointed out fq_codel is not suited for CAN hardware, so this patch changes
attach_one_default_qdisc() to use pfifo_fast for "ARPHRD_CAN" network devices.

During transition of a netdev from down to up state the default queuing
discipline is attached by attach_default_qdiscs() with the help of
attach_one_default_qdisc(). This patch modifies attach_one_default_qdisc() to
attach the pfifo_fast (pfifo_fast_ops) if the network device type is
"ARPHRD_CAN".

[1] https://github.com/systemd/systemd/issues/9194

Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'net-fix-nested-device-bugs'
David S. Miller [Thu, 24 Oct 2019 21:53:49 +0000 (14:53 -0700)]
Merge branch 'net-fix-nested-device-bugs'

Taehee Yoo says:

====================
net: fix nested device bugs

This patchset fixes several bugs that are related to nesting
device infrastructure.
Current nesting infrastructure code doesn't limit the depth level of
devices. nested devices could be handled recursively. at that moment,
it needs huge memory and stack overflow could occur.
Below devices type have same bug.
VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, and VXLAN.
But I couldn't test all interface types so there could be more device
types, which have similar problems.
Maybe qmi_wwan.c code could have same problem.
So, I would appreciate if someone test qmi_wwan.c and other modules.

Test commands:
    ip link add dummy0 type dummy
    ip link add vlan1 link dummy0 type vlan id 1

    for i in {2..100}
    do
    let A=$i-1
    ip link add name vlan$i link vlan$A type vlan id $i
    done
    ip link del dummy0

1st patch actually fixes the root cause.
It adds new common variables {upper/lower}_level that represent
depth level. upper_level variable is depth of upper devices.
lower_level variable is depth of lower devices.

      [U][L]       [U][L]
vlan1  1  5  vlan4  1  4
vlan2  2  4  vlan5  2  3
vlan3  3  3    |
  |            |
  +------------+
  |
vlan6  4  2
dummy0 5  1

After this patch, the nesting infrastructure code uses this variable to
check the depth level.

2nd patch fixes Qdisc lockdep related problem.
Before this patch, devices use static lockdep map.
So, if devices that are same types are nested, lockdep will warn about
recursive situation.
These patches make these devices use dynamic lockdep key instead of
static lock or subclass.

3rd patch fixes unexpected IFF_BONDING bit unset.
When nested bonding interface scenario, bonding interface could lost it's
IFF_BONDING flag. This should not happen.
This patch adds a condition before unsetting IFF_BONDING.

4th patch fixes nested locking problem in bonding interface
Bonding interface has own lock and this uses static lock.
Bonding interface could be nested and it uses same lockdep key.
So that unexisting lockdep warning occurs.

5th patch fixes nested locking problem in team interface
Team interface has own lock and this uses static lock.
Team interface could be nested and it uses same lockdep key.
So that unexisting lockdep warning occurs.

6th patch fixes a refcnt leak in the macsec module.
When the macsec module is unloaded, refcnt leaks occur.
But actually, that holding refcnt is unnecessary.
So this patch just removes these code.

7th patch adds ignore flag to an adjacent structure.
In order to exchange an adjacent node safely, ignore flag is needed.

8th patch makes vxlan add an adjacent link to limit depth level.
Vxlan interface could set it's lower interface and these lower interfaces
are handled recursively.
So, if the depth of lower interfaces is too deep, stack overflow could
happen.

9th patch removes unnecessary variables and callback.
After 1st patch, subclass callback and variables are unnecessary.
This patch just removes these variables and callback.

10th patch fix refcnt leaks in the virt_wifi module
Like every nested interface, the upper interface should be deleted
before the lower interface is deleted.
In order to fix this, the notifier routine is added in this patch.

v4 -> v5 :
 - Update log messages
 - Move variables position, 1st patch
 - Fix iterator routine, 1st patch
 - Add generic lockdep key code, which replaces 2, 4, 5, 6, 7 patches.
 - Log message update, 10th patch
 - Fix wrong error value in error path of __init routine, 10th patch
 - hold module refcnt when interface is created, 10th patch
v3 -> v4 :
 - Add new 12th patch to fix refcnt leaks in the virt_wifi module
 - Fix wrong usage netdev_upper_dev_link() in the vxlan.c
 - Preserve reverse christmas tree variable ordering in the vxlan.c
 - Add missing static keyword in the dev.c
 - Expose netdev_adjacent_change_{prepare/commit/abort} instead of
   netdev_adjacent_dev_{enable/disable}
v2 -> v3 :
 - Modify nesting infrastructure code to use iterator instead of recursive.
v1 -> v2 :
 - Make the 3rd patch do not add a new priv_flag.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agovirt_wifi: fix refcnt leak in module exit routine
Taehee Yoo [Mon, 21 Oct 2019 18:47:59 +0000 (18:47 +0000)]
virt_wifi: fix refcnt leak in module exit routine

virt_wifi_newlink() calls netdev_upper_dev_link() and it internally
holds reference count of lower interface.

Current code does not release a reference count of the lower interface
when the lower interface is being deleted.
So, reference count leaks occur.

Test commands:
    ip link add dummy0 type dummy
    ip link add vw1 link dummy0 type virt_wifi
    ip link del dummy0

Splat looks like:
[  133.787526][  T788] WARNING: CPU: 1 PID: 788 at net/core/dev.c:8274 rollback_registered_many+0x835/0xc80
[  133.788355][  T788] Modules linked in: virt_wifi cfg80211 dummy team af_packet sch_fq_codel ip_tables x_tables unix
[  133.789377][  T788] CPU: 1 PID: 788 Comm: ip Not tainted 5.4.0-rc3+ #96
[  133.790069][  T788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  133.791167][  T788] RIP: 0010:rollback_registered_many+0x835/0xc80
[  133.791906][  T788] Code: 00 4d 85 ff 0f 84 b5 fd ff ff ba c0 0c 00 00 48 89 de 4c 89 ff e8 9b 58 04 00 48 89 df e8 30
[  133.794317][  T788] RSP: 0018:ffff88805ba3f338 EFLAGS: 00010202
[  133.795080][  T788] RAX: ffff88805e57e801 RBX: ffff88805ba34000 RCX: ffffffffa9294723
[  133.796045][  T788] RDX: 1ffff1100b746816 RSI: 0000000000000008 RDI: ffffffffabcc4240
[  133.797006][  T788] RBP: ffff88805ba3f4c0 R08: fffffbfff5798849 R09: fffffbfff5798849
[  133.797993][  T788] R10: 0000000000000001 R11: fffffbfff5798848 R12: dffffc0000000000
[  133.802514][  T788] R13: ffff88805ba3f440 R14: ffff88805ba3f400 R15: ffff88805ed622c0
[  133.803237][  T788] FS:  00007f2e9608c0c0(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[  133.804002][  T788] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  133.804664][  T788] CR2: 00007f2e95610603 CR3: 000000005f68c004 CR4: 00000000000606e0
[  133.805363][  T788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  133.806073][  T788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  133.806787][  T788] Call Trace:
[  133.807069][  T788]  ? generic_xdp_install+0x310/0x310
[  133.807612][  T788]  ? lock_acquire+0x164/0x3b0
[  133.808077][  T788]  ? is_bpf_text_address+0x5/0xf0
[  133.808640][  T788]  ? deref_stack_reg+0x9c/0xd0
[  133.809138][  T788]  ? __nla_validate_parse+0x98/0x1ab0
[  133.809944][  T788]  unregister_netdevice_many.part.122+0x13/0x1b0
[  133.810599][  T788]  rtnl_delete_link+0xbc/0x100
[  133.811073][  T788]  ? rtnl_af_register+0xc0/0xc0
[  133.811672][  T788]  rtnl_dellink+0x30e/0x8a0
[  133.812205][  T788]  ? is_bpf_text_address+0x5/0xf0
[ ... ]

[  144.110530][  T788] unregister_netdevice: waiting for dummy0 to become free. Usage count = 1

This patch adds notifier routine to delete upper interface before deleting
lower interface.

Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: remove unnecessary variables and callback
Taehee Yoo [Mon, 21 Oct 2019 18:47:58 +0000 (18:47 +0000)]
net: remove unnecessary variables and callback

This patch removes variables and callback these are related to the nested
device structure.
devices that can be nested have their own nest_level variable that
represents the depth of nested devices.
In the previous patch, new {lower/upper}_level variables are added and
they replace old private nest_level variable.
So, this patch removes all 'nest_level' variables.

In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added
to get lockdep subclass value, which is actually lower nested depth value.
But now, they use the dynamic lockdep key to avoid lockdep warning instead
of the subclass.
So, this patch removes ->ndo_get_lock_subclass() callback.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agovxlan: add adjacent link to limit depth level
Taehee Yoo [Mon, 21 Oct 2019 18:47:57 +0000 (18:47 +0000)]
vxlan: add adjacent link to limit depth level

Current vxlan code doesn't limit the number of nested devices.
Nested devices would be handled recursively and this routine needs
huge stack memory. So, unlimited nested devices could make
stack overflow.

In order to fix this issue, this patch adds adjacent links.
The adjacent link APIs internally check the depth level.

Test commands:
    ip link add dummy0 type dummy
    ip link add vxlan0 type vxlan id 0 group 239.1.1.1 dev dummy0 \
    dstport 4789
    for i in {1..100}
    do
    let A=$i-1
    ip link add vxlan$i type vxlan id $i group 239.1.1.1 \
    dev vxlan$A dstport 4789
    done
    ip link del dummy0

The top upper link is vxlan100 and the lowest link is vxlan0.
When vxlan0 is deleting, the upper devices will be deleted recursively.
It needs huge stack memory so it makes stack overflow.

Splat looks like:
[  229.628477] =============================================================================
[  229.629785] BUG page->ptl (Not tainted): Padding overwritten. 0x0000000026abf214-0x0000000091f6abb2
[  229.629785] -----------------------------------------------------------------------------
[  229.629785]
[  229.655439] ==================================================================
[  229.629785] INFO: Slab 0x00000000ff7cfda8 objects=19 used=19 fp=0x00000000fe33776c flags=0x200000000010200
[  229.655688] BUG: KASAN: stack-out-of-bounds in unmap_single_vma+0x25a/0x2e0
[  229.655688] Read of size 8 at addr ffff888113076928 by task vlan-network-in/2334
[  229.655688]
[  229.629785] Padding 0000000026abf214: 00 80 14 0d 81 88 ff ff 68 91 81 14 81 88 ff ff  ........h.......
[  229.629785] Padding 0000000001e24790: 38 91 81 14 81 88 ff ff 68 91 81 14 81 88 ff ff  8.......h.......
[  229.629785] Padding 00000000b39397c8: 33 30 62 a7 ff ff ff ff ff eb 60 22 10 f1 ff 1f  30b.......`"....
[  229.629785] Padding 00000000bc98f53a: 80 60 07 13 81 88 ff ff 00 80 14 0d 81 88 ff ff  .`..............
[  229.629785] Padding 000000002aa8123d: 68 91 81 14 81 88 ff ff f7 21 17 a7 ff ff ff ff  h........!......
[  229.629785] Padding 000000001c8c2369: 08 81 14 0d 81 88 ff ff 03 02 00 00 00 00 00 00  ................
[  229.629785] Padding 000000004e290c5d: 21 90 a2 21 10 ed ff ff 00 00 00 00 00 fc ff df  !..!............
[  229.629785] Padding 000000000e25d731: 18 60 07 13 81 88 ff ff c0 8b 13 05 81 88 ff ff  .`..............
[  229.629785] Padding 000000007adc7ab3: b3 8a b5 41 00 00 00 00                          ...A....
[  229.629785] FIX page->ptl: Restoring 0x0000000026abf214-0x0000000091f6abb2=0x5a
[  ... ]

Fixes: acaf4e70997f ("net: vxlan: when lower dev unregisters remove vxlan dev as well")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: core: add ignore flag to netdev_adjacent structure
Taehee Yoo [Mon, 21 Oct 2019 18:47:56 +0000 (18:47 +0000)]
net: core: add ignore flag to netdev_adjacent structure

In order to link an adjacent node, netdev_upper_dev_link() is used
and in order to unlink an adjacent node, netdev_upper_dev_unlink() is used.
unlink operation does not fail, but link operation can fail.

In order to exchange adjacent nodes, we should unlink an old adjacent
node first. then, link a new adjacent node.
If link operation is failed, we should link an old adjacent node again.
But this link operation can fail too.
It eventually breaks the adjacent link relationship.

This patch adds an ignore flag into the netdev_adjacent structure.
If this flag is set, netdev_upper_dev_link() ignores an old adjacent
node for a moment.

This patch also adds new functions for other modules.
netdev_adjacent_change_prepare()
netdev_adjacent_change_commit()
netdev_adjacent_change_abort()

netdev_adjacent_change_prepare() inserts new device into adjacent list
but new device is not allowed to use immediately.
If netdev_adjacent_change_prepare() fails, it internally rollbacks
adjacent list so that we don't need any other action.
netdev_adjacent_change_commit() deletes old device in the adjacent list
and allows new device to use.
netdev_adjacent_change_abort() rollbacks adjacent list.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agomacsec: fix refcnt leak in module exit routine
Taehee Yoo [Mon, 21 Oct 2019 18:47:55 +0000 (18:47 +0000)]
macsec: fix refcnt leak in module exit routine

When a macsec interface is created, it increases a refcnt to a lower
device(real device). when macsec interface is deleted, the refcnt is
decreased in macsec_free_netdev(), which is ->priv_destructor() of
macsec interface.

The problem scenario is this.
When nested macsec interfaces are exiting, the exit routine of the
macsec module makes refcnt leaks.

Test commands:
    ip link add dummy0 type dummy
    ip link add macsec0 link dummy0 type macsec
    ip link add macsec1 link macsec0 type macsec
    modprobe -rv macsec

[  208.629433] unregister_netdevice: waiting for macsec0 to become free. Usage count = 1

Steps of exit routine of macsec module are below.
1. Calls ->dellink() in __rtnl_link_unregister().
2. Checks refcnt and wait refcnt to be 0 if refcnt is not 0 in
netdev_run_todo().
3. Calls ->priv_destruvtor() in netdev_run_todo().

Step2 checks refcnt, but step3 decreases refcnt.
So, step2 waits forever.

This patch makes the macsec module do not hold a refcnt of the lower
device because it already holds a refcnt of the lower device with
netdev_upper_dev_link().

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoteam: fix nested locking lockdep warning
Taehee Yoo [Mon, 21 Oct 2019 18:47:54 +0000 (18:47 +0000)]
team: fix nested locking lockdep warning

team interface could be nested and it's lock variable could be nested too.
But this lock uses static lockdep key and there is no nested locking
handling code such as mutex_lock_nested() and so on.
so the Lockdep would warn about the circular locking scenario that
couldn't happen.
In order to fix, this patch makes the team module to use dynamic lock key
instead of static key.

Test commands:
    ip link add team0 type team
    ip link add team1 type team
    ip link set team0 master team1
    ip link set team0 nomaster
    ip link set team1 master team0
    ip link set team1 nomaster

Splat that looks like:
[   40.364352] WARNING: possible recursive locking detected
[   40.364964] 5.4.0-rc3+ #96 Not tainted
[   40.365405] --------------------------------------------
[   40.365973] ip/750 is trying to acquire lock:
[   40.366542] ffff888060b34c40 (&team->lock){+.+.}, at: team_set_mac_address+0x151/0x290 [team]
[   40.367689]
       but task is already holding lock:
[   40.368729] ffff888051201c40 (&team->lock){+.+.}, at: team_del_slave+0x29/0x60 [team]
[   40.370280]
       other info that might help us debug this:
[   40.371159]  Possible unsafe locking scenario:

[   40.371942]        CPU0
[   40.372338]        ----
[   40.372673]   lock(&team->lock);
[   40.373115]   lock(&team->lock);
[   40.373549]
       *** DEADLOCK ***

[   40.374432]  May be due to missing lock nesting notation

[   40.375338] 2 locks held by ip/750:
[   40.375851]  #0: ffffffffabcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0
[   40.376927]  #1: ffff888051201c40 (&team->lock){+.+.}, at: team_del_slave+0x29/0x60 [team]
[   40.377989]
       stack backtrace:
[   40.378650] CPU: 0 PID: 750 Comm: ip Not tainted 5.4.0-rc3+ #96
[   40.379368] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   40.380574] Call Trace:
[   40.381208]  dump_stack+0x7c/0xbb
[   40.381959]  __lock_acquire+0x269d/0x3de0
[   40.382817]  ? register_lock_class+0x14d0/0x14d0
[   40.383784]  ? check_chain_key+0x236/0x5d0
[   40.384518]  lock_acquire+0x164/0x3b0
[   40.385074]  ? team_set_mac_address+0x151/0x290 [team]
[   40.385805]  __mutex_lock+0x14d/0x14c0
[   40.386371]  ? team_set_mac_address+0x151/0x290 [team]
[   40.387038]  ? team_set_mac_address+0x151/0x290 [team]
[   40.387632]  ? mutex_lock_io_nested+0x1380/0x1380
[   40.388245]  ? team_del_slave+0x60/0x60 [team]
[   40.388752]  ? rcu_read_lock_sched_held+0x90/0xc0
[   40.389304]  ? rcu_read_lock_bh_held+0xa0/0xa0
[   40.389819]  ? lock_acquire+0x164/0x3b0
[   40.390285]  ? lockdep_rtnl_is_held+0x16/0x20
[   40.390797]  ? team_port_get_rtnl+0x90/0xe0 [team]
[   40.391353]  ? __module_text_address+0x13/0x140
[   40.391886]  ? team_set_mac_address+0x151/0x290 [team]
[   40.392547]  team_set_mac_address+0x151/0x290 [team]
[   40.393111]  dev_set_mac_address+0x1f0/0x3f0
[ ... ]

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agobonding: use dynamic lockdep key instead of subclass
Taehee Yoo [Mon, 21 Oct 2019 18:47:53 +0000 (18:47 +0000)]
bonding: use dynamic lockdep key instead of subclass

All bonding device has same lockdep key and subclass is initialized with
nest_level.
But actual nest_level value can be changed when a lower device is attached.
And at this moment, the subclass should be updated but it seems to be
unsafe.
So this patch makes bonding use dynamic lockdep key instead of the
subclass.

Test commands:
    ip link add bond0 type bond

    for i in {1..5}
    do
    let A=$i-1
    ip link add bond$i type bond
    ip link set bond$i master bond$A
    done
    ip link set bond5 master bond0

Splat looks like:
[  307.992912] WARNING: possible recursive locking detected
[  307.993656] 5.4.0-rc3+ #96 Tainted: G        W
[  307.994367] --------------------------------------------
[  307.995092] ip/761 is trying to acquire lock:
[  307.995710] ffff8880513aac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[  307.997045]
       but task is already holding lock:
[  307.997923] ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[  307.999215]
       other info that might help us debug this:
[  308.000251]  Possible unsafe locking scenario:

[  308.001137]        CPU0
[  308.001533]        ----
[  308.001915]   lock(&(&bond->stats_lock)->rlock#2/2);
[  308.002609]   lock(&(&bond->stats_lock)->rlock#2/2);
[  308.003302]
*** DEADLOCK ***

[  308.004310]  May be due to missing lock nesting notation

[  308.005319] 3 locks held by ip/761:
[  308.005830]  #0: ffffffff9fcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0
[  308.006894]  #1: ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[  308.008243]  #2: ffffffff9f9219c0 (rcu_read_lock){....}, at: bond_get_stats+0x9f/0x500 [bonding]
[  308.009422]
       stack backtrace:
[  308.010124] CPU: 0 PID: 761 Comm: ip Tainted: G        W         5.4.0-rc3+ #96
[  308.011097] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  308.012179] Call Trace:
[  308.012601]  dump_stack+0x7c/0xbb
[  308.013089]  __lock_acquire+0x269d/0x3de0
[  308.013669]  ? register_lock_class+0x14d0/0x14d0
[  308.014318]  lock_acquire+0x164/0x3b0
[  308.014858]  ? bond_get_stats+0xb8/0x500 [bonding]
[  308.015520]  _raw_spin_lock_nested+0x2e/0x60
[  308.016129]  ? bond_get_stats+0xb8/0x500 [bonding]
[  308.017215]  bond_get_stats+0xb8/0x500 [bonding]
[  308.018454]  ? bond_arp_rcv+0xf10/0xf10 [bonding]
[  308.019710]  ? rcu_read_lock_held+0x90/0xa0
[  308.020605]  ? rcu_read_lock_sched_held+0xc0/0xc0
[  308.021286]  ? bond_get_stats+0x9f/0x500 [bonding]
[  308.021953]  dev_get_stats+0x1ec/0x270
[  308.022508]  bond_get_stats+0x1d1/0x500 [bonding]

Fixes: d3fff6c443fe ("net: add netdev_lockdep_set_classes() helper")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agobonding: fix unexpected IFF_BONDING bit unset
Taehee Yoo [Mon, 21 Oct 2019 18:47:52 +0000 (18:47 +0000)]
bonding: fix unexpected IFF_BONDING bit unset

The IFF_BONDING means bonding master or bonding slave device.
->ndo_add_slave() sets IFF_BONDING flag and ->ndo_del_slave() unsets
IFF_BONDING flag.

bond0<--bond1

Both bond0 and bond1 are bonding device and these should keep having
IFF_BONDING flag until they are removed.
But bond1 would lose IFF_BONDING at ->ndo_del_slave() because that routine
do not check whether the slave device is the bonding type or not.
This patch adds the interface type check routine before removing
IFF_BONDING flag.

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ip link set bond1 master bond0
    ip link set bond1 nomaster
    ip link del bond1 type bond
    ip link add bond1 type bond

Splat looks like:
[  226.665555] proc_dir_entry 'bonding/bond1' already registered
[  226.666440] WARNING: CPU: 0 PID: 737 at fs/proc/generic.c:361 proc_register+0x2a9/0x3e0
[  226.667571] Modules linked in: bonding af_packet sch_fq_codel ip_tables x_tables unix
[  226.668662] CPU: 0 PID: 737 Comm: ip Not tainted 5.4.0-rc3+ #96
[  226.669508] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  226.670652] RIP: 0010:proc_register+0x2a9/0x3e0
[  226.671612] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 39 01 00 00 48 8b 04 24 48 89 ea 48 c7 c7 a0 0b 14 9f 48 8b b0 e
0 00 00 00 e8 07 e7 88 ff <0f> 0b 48 c7 c7 40 2d a5 9f e8 59 d6 23 01 48 8b 4c 24 10 48 b8 00
[  226.675007] RSP: 0018:ffff888050e17078 EFLAGS: 00010282
[  226.675761] RAX: dffffc0000000008 RBX: ffff88805fdd0f10 RCX: ffffffff9dd344e2
[  226.676757] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f6b8c
[  226.677751] RBP: ffff8880507160f3 R08: ffffed100d940019 R09: ffffed100d940019
[  226.678761] R10: 0000000000000001 R11: ffffed100d940018 R12: ffff888050716008
[  226.679757] R13: ffff8880507160f2 R14: dffffc0000000000 R15: ffffed100a0e2c1e
[  226.680758] FS:  00007fdc217cc0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[  226.681886] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  226.682719] CR2: 00007f49313424d0 CR3: 0000000050e46001 CR4: 00000000000606f0
[  226.683727] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  226.684725] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  226.685681] Call Trace:
[  226.687089]  proc_create_seq_private+0xb3/0xf0
[  226.687778]  bond_create_proc_entry+0x1b3/0x3f0 [bonding]
[  226.691458]  bond_netdev_event+0x433/0x970 [bonding]
[  226.692139]  ? __module_text_address+0x13/0x140
[  226.692779]  notifier_call_chain+0x90/0x160
[  226.693401]  register_netdevice+0x9b3/0xd80
[  226.694010]  ? alloc_netdev_mqs+0x854/0xc10
[  226.694629]  ? netdev_change_features+0xa0/0xa0
[  226.695278]  ? rtnl_create_link+0x2ed/0xad0
[  226.695849]  bond_newlink+0x2a/0x60 [bonding]
[  226.696422]  __rtnl_newlink+0xb9f/0x11b0
[  226.696968]  ? rtnl_link_unregister+0x220/0x220
[ ... ]

Fixes: 0b680e753724 ("[PATCH] bonding: Add priv_flag to avoid event mishandling")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: core: add generic lockdep keys
Taehee Yoo [Mon, 21 Oct 2019 18:47:51 +0000 (18:47 +0000)]
net: core: add generic lockdep keys

Some interface types could be nested.
(VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..)
These interface types should set lockdep class because, without lockdep
class key, lockdep always warn about unexisting circular locking.

In the current code, these interfaces have their own lockdep class keys and
these manage itself. So that there are so many duplicate code around the
/driver/net and /net/.
This patch adds new generic lockdep keys and some helper functions for it.

This patch does below changes.
a) Add lockdep class keys in struct net_device
   - qdisc_running, xmit, addr_list, qdisc_busylock
   - these keys are used as dynamic lockdep key.
b) When net_device is being allocated, lockdep keys are registered.
   - alloc_netdev_mqs()
c) When net_device is being free'd llockdep keys are unregistered.
   - free_netdev()
d) Add generic lockdep key helper function
   - netdev_register_lockdep_key()
   - netdev_unregister_lockdep_key()
   - netdev_update_lockdep_key()
e) Remove unnecessary generic lockdep macro and functions
f) Remove unnecessary lockdep code of each interfaces.

After this patch, each interface modules don't need to maintain
their lockdep keys.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: core: limit nested device depth
Taehee Yoo [Mon, 21 Oct 2019 18:47:50 +0000 (18:47 +0000)]
net: core: limit nested device depth

Current code doesn't limit the number of nested devices.
Nested devices would be handled recursively and this needs huge stack
memory. So, unlimited nested devices could make stack overflow.

This patch adds upper_level and lower_level, they are common variables
and represent maximum lower/upper depth.
When upper/lower device is attached or dettached,
{lower/upper}_level are updated. and if maximum depth is bigger than 8,
attach routine fails and returns -EMLINK.

In addition, this patch converts recursive routine of
netdev_walk_all_{lower/upper} to iterator routine.

Test commands:
    ip link add dummy0 type dummy
    ip link add link dummy0 name vlan1 type vlan id 1
    ip link set vlan1 up

    for i in {2..55}
    do
    let A=$i-1

    ip link add vlan$i link vlan$A type vlan id $i
    done
    ip link del dummy0

Splat looks like:
[  155.513226][  T908] BUG: KASAN: use-after-free in __unwind_start+0x71/0x850
[  155.514162][  T908] Write of size 88 at addr ffff8880608a6cc0 by task ip/908
[  155.515048][  T908]
[  155.515333][  T908] CPU: 0 PID: 908 Comm: ip Not tainted 5.4.0-rc3+ #96
[  155.516147][  T908] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  155.517233][  T908] Call Trace:
[  155.517627][  T908]
[  155.517918][  T908] Allocated by task 0:
[  155.518412][  T908] (stack is not available)
[  155.518955][  T908]
[  155.519228][  T908] Freed by task 0:
[  155.519885][  T908] (stack is not available)
[  155.520452][  T908]
[  155.520729][  T908] The buggy address belongs to the object at ffff8880608a6ac0
[  155.520729][  T908]  which belongs to the cache names_cache of size 4096
[  155.522387][  T908] The buggy address is located 512 bytes inside of
[  155.522387][  T908]  4096-byte region [ffff8880608a6ac0ffff8880608a7ac0)
[  155.523920][  T908] The buggy address belongs to the page:
[  155.524552][  T908] page:ffffea0001822800 refcount:1 mapcount:0 mapping:ffff88806c657cc0 index:0x0 compound_mapcount:0
[  155.525836][  T908] flags: 0x100000000010200(slab|head)
[  155.526445][  T908] raw: 0100000000010200 ffffea0001813808 ffffea0001a26c08 ffff88806c657cc0
[  155.527424][  T908] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  155.528429][  T908] page dumped because: kasan: bad access detected
[  155.529158][  T908]
[  155.529410][  T908] Memory state around the buggy address:
[  155.530060][  T908]  ffff8880608a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  155.530971][  T908]  ffff8880608a6c00: fb fb fb fb fb f1 f1 f1 f1 00 f2 f2 f2 f3 f3 f3
[  155.531889][  T908] >ffff8880608a6c80: f3 fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  155.532806][  T908]                                            ^
[  155.533509][  T908]  ffff8880608a6d00: fb fb fb fb fb fb fb fb fb f1 f1 f1 f1 00 00 00
[  155.534436][  T908]  ffff8880608a6d80: f2 f3 f3 f3 f3 fb fb fb 00 00 00 00 00 00 00 00
[ ... ]

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agokeys: Fix memory leak in copy_net_ns
Takeshi Misawa [Sat, 19 Oct 2019 06:34:43 +0000 (15:34 +0900)]
keys: Fix memory leak in copy_net_ns

If copy_net_ns() failed after net_alloc(), net->key_domain is leaked.
Fix this, by freeing key_domain in error path.

syzbot report:
BUG: memory leak
unreferenced object 0xffff8881175007e0 (size 32):
  comm "syz-executor902", pid 7069, jiffies 4294944350 (age 28.400s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000a83ed741>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<00000000a83ed741>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<00000000a83ed741>] slab_alloc mm/slab.c:3326 [inline]
    [<00000000a83ed741>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
    [<0000000059fc92b9>] kmalloc include/linux/slab.h:547 [inline]
    [<0000000059fc92b9>] kzalloc include/linux/slab.h:742 [inline]
    [<0000000059fc92b9>] net_alloc net/core/net_namespace.c:398 [inline]
    [<0000000059fc92b9>] copy_net_ns+0xb2/0x220 net/core/net_namespace.c:445
    [<00000000a9d74bbc>] create_new_namespaces+0x141/0x2a0 kernel/nsproxy.c:103
    [<000000008047d645>] unshare_nsproxy_namespaces+0x7f/0x100 kernel/nsproxy.c:202
    [<000000005993ea6e>] ksys_unshare+0x236/0x490 kernel/fork.c:2674
    [<0000000019417e75>] __do_sys_unshare kernel/fork.c:2742 [inline]
    [<0000000019417e75>] __se_sys_unshare kernel/fork.c:2740 [inline]
    [<0000000019417e75>] __x64_sys_unshare+0x16/0x20 kernel/fork.c:2740
    [<00000000f4c5f2c8>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296
    [<0000000038550184>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

syzbot also reported other leak in copy_net_ns -> setup_net.
This problem is already fixed by cf47a0b882a4e5f6b34c7949d7b293e9287f1972.

Fixes: 9b242610514f ("keys: Network namespace domain tag")
Reported-and-tested-by: syzbot+3b3296d032353c33184b@syzkaller.appspotmail.com
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonetfilter: nft_payload: fix missing check for matching length in offloads
wenxu [Thu, 24 Oct 2019 07:52:45 +0000 (15:52 +0800)]
netfilter: nft_payload: fix missing check for matching length in offloads

Payload offload rule should also check the length of the match.
Moreover, check for unsupported link-layer fields:

 nft --debug=netlink add rule firewall zones vlan id 100
 ...
 [ payload load 2b @ link header + 0 => reg 1 ]

this loads 2byte base on ll header and offset 0.

This also fixes unsupported raw payload match.

Fixes: 92ad6325cb89 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
5 years agoipvs: move old_secure_tcp into struct netns_ipvs
Eric Dumazet [Wed, 23 Oct 2019 16:53:03 +0000 (09:53 -0700)]
ipvs: move old_secure_tcp into struct netns_ipvs

syzbot reported the following issue :

BUG: KCSAN: data-race in update_defense_level / update_defense_level

read to 0xffffffff861a6260 of 4 bytes by task 3006 on cpu 1:
 update_defense_level+0x621/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:177
 defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

write to 0xffffffff861a6260 of 4 bytes by task 7333 on cpu 0:
 update_defense_level+0xa62/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:205
 defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7333 Comm: kworker/0:5 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events defense_work_handler

Indeed, old_secure_tcp is currently a static variable, while it
needs to be a per netns variable.

Fixes: a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
5 years agoipvs: don't ignore errors in case refcounting ip_vs module fails
Davide Caratti [Sat, 19 Oct 2019 15:34:35 +0000 (17:34 +0200)]
ipvs: don't ignore errors in case refcounting ip_vs module fails

if the IPVS module is removed while the sync daemon is starting, there is
a small gap where try_module_get() might fail getting the refcount inside
ip_vs_use_count_inc(). Then, the refcounts of IPVS module are unbalanced,
and the subsequent call to stop_sync_thread() causes the following splat:

 WARNING: CPU: 0 PID: 4013 at kernel/module.c:1146 module_put.part.44+0x15b/0x290
  Modules linked in: ip_vs(-) nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul ext4 mbcache jbd2 ghash_clmulni_intel snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev pcspkr snd_timer virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net net_failover virtio_blk failover virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ata_piix ttm crc32c_intel serio_raw drm virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nf_defrag_ipv6]
  CPU: 0 PID: 4013 Comm: modprobe Tainted: G        W         5.4.0-rc1.upstream+ #741
  Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
  RIP: 0010:module_put.part.44+0x15b/0x290
  Code: 04 25 28 00 00 00 0f 85 18 01 00 00 48 83 c4 68 5b 5d 41 5c 41 5d 41 5e 41 5f c3 89 44 24 28 83 e8 01 89 c5 0f 89 57 ff ff ff <0f> 0b e9 78 ff ff ff 65 8b 1d 67 83 26 4a 89 db be 08 00 00 00 48
  RSP: 0018:ffff888050607c78 EFLAGS: 00010297
  RAX: 0000000000000003 RBX: ffffffffc1420590 RCX: ffffffffb5db0ef9
  RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffc1420590
  RBP: 00000000ffffffff R08: fffffbfff82840b3 R09: fffffbfff82840b3
  R10: 0000000000000001 R11: fffffbfff82840b2 R12: 1ffff1100a0c0f90
  R13: ffffffffc1420200 R14: ffff88804f533300 R15: ffff88804f533ca0
  FS:  00007f8ea9720740(0000) GS:ffff888053800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f3245abe000 CR3: 000000004c28a006 CR4: 00000000001606f0
  Call Trace:
   stop_sync_thread+0x3a3/0x7c0 [ip_vs]
   ip_vs_sync_net_cleanup+0x13/0x50 [ip_vs]
   ops_exit_list.isra.5+0x94/0x140
   unregister_pernet_operations+0x29d/0x460
   unregister_pernet_device+0x26/0x60
   ip_vs_cleanup+0x11/0x38 [ip_vs]
   __x64_sys_delete_module+0x2d5/0x400
   do_syscall_64+0xa5/0x4e0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f8ea8bf0db7
  Code: 73 01 c3 48 8b 0d b9 80 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 80 2c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffcd38d2fe8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000000002436240 RCX: 00007f8ea8bf0db7
  RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00000000024362a8
  RBP: 0000000000000000 R08: 00007f8ea8eba060 R09: 00007f8ea8c658a0
  R10: 00007ffcd38d2a60 R11: 0000000000000206 R12: 0000000000000000
  R13: 0000000000000001 R14: 00000000024362a8 R15: 0000000000000000
  irq event stamp: 4538
  hardirqs last  enabled at (4537): [<ffffffffb6193dde>] quarantine_put+0x9e/0x170
  hardirqs last disabled at (4538): [<ffffffffb5a0556a>] trace_hardirqs_off_thunk+0x1a/0x20
  softirqs last  enabled at (4522): [<ffffffffb6f8ebe9>] sk_common_release+0x169/0x2d0
  softirqs last disabled at (4520): [<ffffffffb6f8eb3e>] sk_common_release+0xbe/0x2d0

Check the return value of ip_vs_use_count_inc() and let its caller return
proper error. Inside do_ip_vs_set_ctl() the module is already refcounted,
we don't need refcount/derefcount there. Finally, in register_ip_vs_app()
and start_sync_thread(), take the module refcount earlier and ensure it's
released in the error path.

Change since v1:
 - better return values in case of failure of ip_vs_use_count_inc(),
   thanks to Julian Anastasov
 - no need to increase/decrease the module refcount in ip_vs_set_ctl(),
   thanks to Julian Anastasov

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
5 years agonet: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flag
Martin Fuzzey [Wed, 23 Oct 2019 09:44:24 +0000 (11:44 +0200)]
net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flag

The LAN8740, like the 8720, also requires a reset after enabling clock.
The datasheet [1] 3.8.5.1 says:
"During a Hardware reset, an external clock must be supplied
to the XTAL1/CLKIN signal."

I have observed this issue on a custom i.MX6 based board with
the LAN8740A.

[1] http://ww1.microchip.com/downloads/en/DeviceDoc/8740a.pdf

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoxsk: Fix registration of Rx-only sockets
Magnus Karlsson [Mon, 21 Oct 2019 08:16:58 +0000 (10:16 +0200)]
xsk: Fix registration of Rx-only sockets

Having Rx-only AF_XDP sockets can potentially lead to a crash in the
system by a NULL pointer dereference in xsk_umem_consume_tx(). This
function iterates through a list of all sockets tied to a umem and
checks if there are any packets to send on the Tx ring. Rx-only
sockets do not have a Tx ring, so this will cause a NULL pointer
dereference. This will happen if you have registered one or more
Rx-only sockets to a umem and the driver is checking the Tx ring even
on Rx, or if the XDP_SHARED_UMEM mode is used and there is a mix of
Rx-only and other sockets tied to the same umem.

Fixed by only putting sockets with a Tx component on the list that
xsk_umem_consume_tx() iterates over.

Fixes: ac98d8aab61b ("xsk: wire upp Tx zero-copy functions")
Reported-by: Kal Cutter Conley <kal.conley@dectris.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1571645818-16244-1-git-send-email-magnus.karlsson@intel.com
5 years agonet/flow_dissector: switch to siphash
Eric Dumazet [Tue, 22 Oct 2019 14:57:46 +0000 (07:57 -0700)]
net/flow_dissector: switch to siphash

UDP IPv6 packets auto flowlabels are using a 32bit secret
(static u32 hashrnd in net/core/flow_dissector.c) and
apply jhash() over fields known by the receivers.

Attackers can easily infer the 32bit secret and use this information
to identify a device and/or user, since this 32bit secret is only
set at boot time.

Really, using jhash() to generate cookies sent on the wire
is a serious security concern.

Trying to change the rol32(hash, 16) in ip6_make_flowlabel() would be
a dead end. Trying to periodically change the secret (like in sch_sfq.c)
could change paths taken in the network for long lived flows.

Let's switch to siphash, as we did in commit df453700e8d8
("inet: switch IP ID generator to siphash")

Using a cryptographically strong pseudo random function will solve this
privacy issue and more generally remove other weak points in the stack.

Packet schedulers using skb_get_hash_perturb() benefit from this change.

Fixes: b56774163f99 ("ipv6: Enable auto flow labels by default")
Fixes: 42240901f7c4 ("ipv6: Implement different admin modes for automatic flow labels")
Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel")
Fixes: cb1ce2ef387b ("ipv6: Implement automatic flow label generation on transmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jonathan Berger <jonathann1@walla.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonetfilter: nf_tables_offload: restore basechain deletion
Pablo Neira Ayuso [Fri, 18 Oct 2019 12:10:31 +0000 (14:10 +0200)]
netfilter: nf_tables_offload: restore basechain deletion

Unbind callbacks on chain deletion.

Fixes: 8fc618c52d16 ("netfilter: nf_tables_offload: refactor the nft_flow_offload_chain function")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
5 years agonetfilter: nf_flow_table: set timeout before insertion into hashes
Pablo Neira Ayuso [Mon, 14 Oct 2019 09:03:15 +0000 (11:03 +0200)]
netfilter: nf_flow_table: set timeout before insertion into hashes

Other garbage collector might remove an entry not fully set up yet.

[570953.958293] RIP: 0010:memcmp+0x9/0x50
[...]
[570953.958567]  flow_offload_hash_cmp+0x1e/0x30 [nf_flow_table]
[570953.958585]  flow_offload_lookup+0x8c/0x110 [nf_flow_table]
[570953.958606]  nf_flow_offload_ip_hook+0x135/0xb30 [nf_flow_table]
[570953.958624]  nf_flow_offload_inet_hook+0x35/0x37 [nf_flow_table_inet]
[570953.958646]  nf_hook_slow+0x3c/0xb0
[570953.958664]  __netif_receive_skb_core+0x90f/0xb10
[570953.958678]  ? ip_rcv_finish+0x82/0xa0
[570953.958692]  __netif_receive_skb_one_core+0x3b/0x80
[570953.958711]  __netif_receive_skb+0x18/0x60
[570953.958727]  netif_receive_skb_internal+0x45/0xf0
[570953.958741]  napi_gro_receive+0xcd/0xf0
[570953.958764]  ixgbe_clean_rx_irq+0x432/0xe00 [ixgbe]
[570953.958782]  ixgbe_poll+0x27b/0x700 [ixgbe]
[570953.958796]  net_rx_action+0x284/0x3c0
[570953.958817]  __do_softirq+0xcc/0x27c
[570953.959464]  irq_exit+0xe8/0x100
[570953.960097]  do_IRQ+0x59/0xe0
[570953.960734]  common_interrupt+0xf/0xf

Fixes: 43c8f131184f ("netfilter: nf_flow_table: fix missing error check for rhashtable_insert_fast")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
5 years agobpf: Fix use after free in bpf_get_prog_name
Daniel Borkmann [Tue, 22 Oct 2019 21:30:38 +0000 (23:30 +0200)]
bpf: Fix use after free in bpf_get_prog_name

There is one more problematic case I noticed while recently fixing BPF kallsyms
handling in cd7455f1013e ("bpf: Fix use after free in subprog's jited symbol
removal") and that is bpf_get_prog_name().

If BTF has been attached to the prog, then we may be able to fetch the function
signature type id in kallsyms through prog->aux->func_info[prog->aux->func_idx].type_id.
However, while the BTF object itself is torn down via RCU callback, the prog's
aux->func_info is immediately freed via kvfree(prog->aux->func_info) once the
prog's refcount either hit zero or when subprograms were already exposed via
kallsyms and we hit the error path added in 5482e9a93c83 ("bpf: Fix memleak in
aux->func_info and aux->btf").

This violates RCU as well since kallsyms could be walked in parallel where we
could access aux->func_info. Hence, defer kvfree() to after RCU grace period.
Looking at ba64e7d85252 ("bpf: btf: support proper non-jit func info") there
is no reason/dependency where we couldn't defer the kvfree(aux->func_info) into
the RCU callback.

Fixes: 5482e9a93c83 ("bpf: Fix memleak in aux->func_info and aux->btf")
Fixes: ba64e7d85252 ("bpf: btf: support proper non-jit func info")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/875f2906a7c1a0691f2d567b4d8e4ea2739b1e88.1571779205.git.daniel@iogearbox.net
5 years agoipv6: include <net/addrconf.h> for missing declarations
Ben Dooks (Codethink) [Tue, 22 Oct 2019 14:44:40 +0000 (15:44 +0100)]
ipv6: include <net/addrconf.h> for missing declarations

Include <net/addrconf.h> for the missing declarations of
various functions. Fixes the following sparse warnings:

net/ipv6/addrconf_core.c:94:5: warning: symbol 'register_inet6addr_notifier' was not declared. Should it be static?
net/ipv6/addrconf_core.c:100:5: warning: symbol 'unregister_inet6addr_notifier' was not declared. Should it be static?
net/ipv6/addrconf_core.c:106:5: warning: symbol 'inet6addr_notifier_call_chain' was not declared. Should it be static?
net/ipv6/addrconf_core.c:112:5: warning: symbol 'register_inet6addr_validator_notifier' was not declared. Should it be static?
net/ipv6/addrconf_core.c:118:5: warning: symbol 'unregister_inet6addr_validator_notifier' was not declared. Should it be static?
net/ipv6/addrconf_core.c:125:5: warning: symbol 'inet6addr_validator_notifier_call_chain' was not declared. Should it be static?
net/ipv6/addrconf_core.c:237:6: warning: symbol 'in6_dev_finish_destroy' was not declared. Should it be static?

Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
5 years agonet: openvswitch: free vport unless register_netdevice() succeeds
Hillf Danton [Mon, 21 Oct 2019 10:01:57 +0000 (12:01 +0200)]
net: openvswitch: free vport unless register_netdevice() succeeds

syzbot found the following crash on:

HEAD commit:    1e78030e Merge tag 'mmc-v5.3-rc1' of git://git.kernel.org/..
git tree:       upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=148d3d1a600000
kernel config:  https://syzkaller.appspot.com/x/.config?x=30cef20daf3e9977
link: https://syzkaller.appspot.com/bug?extid=13210896153522fe1ee5
compiler:       gcc (GCC) 9.0.0 20181231 (experimental)
syz repro:      https://syzkaller.appspot.com/x/repro.syz?x=136aa8c4600000
C reproducer:   https://syzkaller.appspot.com/x/repro.c?x=109ba792600000

=====================================================================
BUG: memory leak
unreferenced object 0xffff8881207e4100 (size 128):
   comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s)
   hex dump (first 32 bytes):
     00 70 16 18 81 88 ff ff 80 af 8c 22 81 88 ff ff  .p........."....
     00 b6 23 17 81 88 ff ff 00 00 00 00 00 00 00 00  ..#.............
   backtrace:
     [<000000000eb78212>] kmemleak_alloc_recursive  include/linux/kmemleak.h:43 [inline]
     [<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline]
     [<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline]
     [<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
     [<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline]
     [<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline]
     [<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0  net/openvswitch/vport.c:130
     [<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0  net/openvswitch/vport-internal_dev.c:164
     [<0000000056ee7c13>] ovs_vport_add+0x81/0x190  net/openvswitch/vport.c:199
     [<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
     [<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410  net/openvswitch/datapath.c:1614
     [<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0  net/netlink/genetlink.c:629
     [<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
     [<000000006694b647>] netlink_rcv_skb+0x61/0x170  net/netlink/af_netlink.c:2477
     [<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
     [<00000000dad42a47>] netlink_unicast_kernel  net/netlink/af_netlink.c:1302 [inline]
     [<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0  net/netlink/af_netlink.c:1328
     [<0000000067e6b079>] netlink_sendmsg+0x270/0x480  net/netlink/af_netlink.c:1917
     [<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
     [<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
     [<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
     [<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
     [<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline]
     [<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline]
     [<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363

BUG: memory leak
unreferenced object 0xffff88811723b600 (size 64):
   comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s)
   hex dump (first 32 bytes):
     01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
     00 00 00 00 00 00 00 00 02 00 00 00 05 35 82 c1  .............5..
   backtrace:
     [<00000000352f46d8>] kmemleak_alloc_recursive  include/linux/kmemleak.h:43 [inline]
     [<00000000352f46d8>] slab_post_alloc_hook mm/slab.h:522 [inline]
     [<00000000352f46d8>] slab_alloc mm/slab.c:3319 [inline]
     [<00000000352f46d8>] __do_kmalloc mm/slab.c:3653 [inline]
     [<00000000352f46d8>] __kmalloc+0x169/0x300 mm/slab.c:3664
     [<000000008e48f3d1>] kmalloc include/linux/slab.h:557 [inline]
     [<000000008e48f3d1>] ovs_vport_set_upcall_portids+0x54/0xd0  net/openvswitch/vport.c:343
     [<00000000541e4f4a>] ovs_vport_alloc+0x7f/0xf0  net/openvswitch/vport.c:139
     [<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0  net/openvswitch/vport-internal_dev.c:164
     [<0000000056ee7c13>] ovs_vport_add+0x81/0x190  net/openvswitch/vport.c:199
     [<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
     [<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410  net/openvswitch/datapath.c:1614
     [<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0  net/netlink/genetlink.c:629
     [<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
     [<000000006694b647>] netlink_rcv_skb+0x61/0x170  net/netlink/af_netlink.c:2477
     [<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
     [<00000000dad42a47>] netlink_unicast_kernel  net/netlink/af_netlink.c:1302 [inline]
     [<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0  net/netlink/af_netlink.c:1328
     [<0000000067e6b079>] netlink_sendmsg+0x270/0x480  net/netlink/af_netlink.c:1917
     [<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
     [<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
     [<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
     [<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356

BUG: memory leak
unreferenced object 0xffff8881228ca500 (size 128):
   comm "syz-executor032", pid 7015, jiffies 4294944622 (age 7.880s)
   hex dump (first 32 bytes):
     00 f0 27 18 81 88 ff ff 80 ac 8c 22 81 88 ff ff  ..'........"....
     40 b7 23 17 81 88 ff ff 00 00 00 00 00 00 00 00  @.#.............
   backtrace:
     [<000000000eb78212>] kmemleak_alloc_recursive  include/linux/kmemleak.h:43 [inline]
     [<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline]
     [<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline]
     [<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
     [<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline]
     [<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline]
     [<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0  net/openvswitch/vport.c:130
     [<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0  net/openvswitch/vport-internal_dev.c:164
     [<0000000056ee7c13>] ovs_vport_add+0x81/0x190  net/openvswitch/vport.c:199
     [<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
     [<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410  net/openvswitch/datapath.c:1614
     [<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0  net/netlink/genetlink.c:629
     [<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
     [<000000006694b647>] netlink_rcv_skb+0x61/0x170  net/netlink/af_netlink.c:2477
     [<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
     [<00000000dad42a47>] netlink_unicast_kernel  net/netlink/af_netlink.c:1302 [inline]
     [<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0  net/netlink/af_netlink.c:1328
     [<0000000067e6b079>] netlink_sendmsg+0x270/0x480  net/netlink/af_netlink.c:1917
     [<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
     [<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
     [<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
     [<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
     [<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline]
     [<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline]
     [<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363
=====================================================================

The function in net core, register_netdevice(), may fail with vport's
destruction callback either invoked or not. After commit 309b66970ee2
("net: openvswitch: do not free vport if register_netdevice() is failed."),
the duty to destroy vport is offloaded from the driver OTOH, which ends
up in the memory leak reported.

It is fixed by releasing vport unless device is registered successfully.
To do that, the callback assignment is defered until device is registered.

Reported-by: syzbot+13210896153522fe1ee5@syzkaller.appspotmail.com
Fixes: 309b66970ee2 ("net: openvswitch: do not free vport if register_netdevice() is failed.")
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Greg Rose <gvrose8192@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
[sbrivio: this was sent to dev@openvswitch.org and never made its way
 to netdev -- resending original patch]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
5 years agoselftests: Make l2tp.sh executable
David Ahern [Tue, 22 Oct 2019 01:02:43 +0000 (19:02 -0600)]
selftests: Make l2tp.sh executable

Kernel test robot reported that the l2tp.sh test script failed:
    # selftests: net: l2tp.sh
    # Warning: file l2tp.sh is not executable, correct this.

Set executable bits.

Fixes: e858ef1cd4bc ("selftests: Add l2tp tests")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
5 years agonet: sched: taprio: fix -Wmissing-prototypes warnings
Yi Wang [Mon, 21 Oct 2019 23:57:42 +0000 (07:57 +0800)]
net: sched: taprio: fix -Wmissing-prototypes warnings

We get one warnings when build kernel W=1:
net/sched/sch_taprio.c:1155:6: warning: no previous prototype for ‘taprio_offload_config_changed’ [-Wmissing-prototypes]

Make the function static to fix this.

Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading")
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
5 years agoMerge branch 'bnxt_en-bug-fixes'
Jakub Kicinski [Tue, 22 Oct 2019 20:15:59 +0000 (13:15 -0700)]
Merge branch 'bnxt_en-bug-fixes'

Michael Chan says:

====================
Devlink and error recovery bug fix patches.
Most of the work is by Vasundhara Volam.
====================

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>