Hangbin Liu [Wed, 27 Oct 2021 03:35:51 +0000 (11:35 +0800)]
selftests/bpf/xdp_redirect_multi: Use arping to accurate the arp number
The arp request number triggered by ping none exist address is not accurate,
which may lead the test false negative/positive. Change to use arping to
accurate the arp number. Also do not use grep pattern match for dot.
Fixes: dc048e497cee ("selftests/bpf: Add xdp_redirect_multi test") Suggested-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211027033553.962413-3-liuhangbin@gmail.com
Quentin Monnet [Fri, 5 Nov 2021 01:58:13 +0000 (01:58 +0000)]
bpftool: Install libbpf headers for the bootstrap version, too
We recently changed bpftool's Makefile to make it install libbpf's
headers locally instead of pulling them from the source directory of the
library. Although bpftool needs two versions of libbpf, a "regular" one
and a "bootstrap" version, we would only install headers for the regular
libbpf build. Given that this build always occurs before the bootstrap
build when building bpftool, this is enough to ensure that the bootstrap
bpftool will have access to the headers exported through the regular
libbpf build.
However, this did not account for the case when we only want the
bootstrap version of bpftool, through the "bootstrap" target. For
example, perf needs the bootstrap version only, to generate BPF
skeletons. In that case, when are the headers installed? For some time,
the issue has been masked, because we had a step (the installation of
headers internal to libbpf) which would depend on the regular build of
libbpf and hence trigger the export of the headers, just for the sake of
creating a directory. But this changed with commit fcf205b2c175
("bpftool: Remove Makefile dep. on $(LIBBPF) for
$(LIBBPF_INTERNAL_HDRS)"), where we cleaned up that stage and removed
the dependency on the regular libbpf build. As a result, when we only
want the bootstrap bpftool version, the regular libbpf is no longer
built. The bootstrap libbpf version is built, but headers are not
exported, and the bootstrap bpftool build fails because of the missing
headers.
To fix this, we also install the library headers for the bootstrap
version of libbpf, to use them for the bootstrap bpftool and for
generating the skeletons.
Fixes: ba1c36bdda8b ("bpftool: Install libbpf headers instead of including the dir") Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/bpf/20211105015813.6171-1-quentin@isovalent.com
selftests/net: Fix reuseport_bpf_numa by skipping unavailable nodes
In some platforms the numa node numbers are not necessarily consecutive,
meaning that not all nodes from 0 to the value returned by numa_max_node()
are available on the system. Using node numbers which are not available
results on errors from libnuma such as:
---- IPv4 UDP ----
send node 0, receive socket 0
libnuma: Warning: Cannot read node cpumask from sysfs
./reuseport_bpf_numa: failed to pin to node: No such file or directory
Fix it by checking if the node number bit is set on numa_nodes_ptr, which
is defined on libnuma as "Set with all nodes the kernel has exposed to
userspace".
selftests/bpf: Verifier test on refill from a smaller spill
This patch adds a verifier test to ensure the verifier can read 8 bytes
from the stack after two 32bit write at fp-4 and fp-8. The test is similar
to the reported case from bcc [0].
bpf: Do not reject when the stack read size is different from the tracked scalar size
Below is a simplified case from a report in bcc [0]:
r4 = 20
*(u32 *)(r10 -4) = r4
*(u32 *)(r10 -8) = r4 /* r4 state is tracked */
r4 = *(u64 *)(r10 -8) /* Read more than the tracked 32bit scalar.
* verifier rejects as 'corrupted spill memory'.
*/
After commit bea4285c6d10 ("bpf: Support <8-byte scalar spill and refill"),
the 8-byte aligned 32bit spill is also tracked by the verifier and the
register state is stored.
However, if 8 bytes are read from the stack instead of the tracked 4 byte
scalar, then verifier currently rejects the program as "corrupted spill
memory". This patch fixes this case by allowing it to read but marks the
register as unknown.
Also note that, if the prog is trying to corrupt/leak an earlier spilled
pointer by spilling another <8 bytes register on top, this has already
been rejected in the check_stack_write_fixed_off().
[0] https://github.com/iovisor/bcc/pull/3683
Fixes: bea4285c6d10 ("bpf: Support <8-byte scalar spill and refill") Reported-by: Hengqi Chen <hengqi.chen@gmail.com> Reported-by: Yonghong Song <yhs@gmail.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Hengqi Chen <hengqi.chen@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20211102064535.316018-1-kafai@fb.com
Andrii Nakryiko [Wed, 3 Nov 2021 05:41:13 +0000 (22:41 -0700)]
selftests/bpf: Make netcnt selftests serial to avoid spurious failures
When running `./test_progs -j` test_netcnt fails with a very high
probability, undercounting number of packets received (9999 vs expected
10000). It seems to be conflicting with other cgroup/skb selftests. So
make it serial for now to make parallel mode more robust.
Lorenz Bauer [Thu, 28 Oct 2021 09:47:24 +0000 (10:47 +0100)]
selftests/bpf: Test RENAME_EXCHANGE and RENAME_NOREPLACE on bpffs
Add tests to exercise the behaviour of RENAME_EXCHANGE and RENAME_NOREPLACE
on bpffs. The former checks that after an exchange the inode of two
directories has changed. The latter checks that the source still exists
after a failed rename. Generally, having support for renameat2(RENAME_EXCHANGE)
in bpffs fixes atomic upgrades of our sk_lookup control plane.
Vladimir Oltean [Tue, 2 Nov 2021 19:31:22 +0000 (21:31 +0200)]
net: dsa: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge
Normally it is expected that the dsa_device_ops :: rcv() method finishes
parsing the DSA tag and consumes it, then never looks at it again.
But commit 3ba2de9fece1 ("net: dsa: ocelot: add hardware timestamping
support for Felix") added support for RX timestamping in a very
unconventional way. On this switch, a partial timestamp is available in
the DSA header, but the driver got away with not parsing that timestamp
right away, but instead delayed that parsing for a little longer:
dsa_switch_rcv():
nskb = cpu_dp->rcv(skb, dev); <------------- not here
-> ocelot_rcv()
...
if (dsa_skb_defer_rx_timestamp(p, skb)) <--- but here
-> felix_rxtstamp()
return 0;
When in felix_rxtstamp(), this driver accounted for the fact that
eth_type_trans() happened in the meanwhile, so it got a hold of the
extraction header again by subtracting (ETH_HLEN + OCELOT_TAG_LEN) bytes
from the current skb->data.
This worked for quite some time but was quite fragile from the very
beginning. Not to mention that having DSA tag parsing split in two
different files, under different folders (net/dsa/tag_ocelot.c vs
drivers/net/dsa/ocelot/felix.c) made it quite non-obvious for patches to
come that they might break this.
Finally, the blamed commit does the following: at the end of
ocelot_rcv(), it checks whether the skb payload contains a VLAN header.
If it does, and this port is under a VLAN-aware bridge, that VLAN ID
might not be correct in the sense that the packet might have suffered
VLAN rewriting due to TCAM rules (VCAP IS1). So we consume the VLAN ID
from the skb payload using __skb_vlan_pop(), and take the classified
VLAN ID from the DSA tag, and construct a hwaccel VLAN tag with the
classified VLAN, and the skb payload is VLAN-untagged.
aka it moves the Ethernet header 4 bytes to the right, and pulls 4 bytes
from the skb headroom (effectively also moving skb->data, by definition).
So for felix_rxtstamp()'s fragile logic, all bets are off now.
Instead of having the "extraction" pointer point to the DSA header,
it actually points to 4 bytes _inside_ the extraction header.
Corollary, the last 4 bytes of the "extraction" header are in fact 4
stale bytes of the destination MAC address from the Ethernet header,
from prior to the __skb_vlan_pop() movement.
So of course, RX timestamps are completely bogus when the system is
configured in this way.
The fix is actually very simple: just don't structure the code like that.
For better or worse, the DSA PTP timestamping API does not offer a
straightforward way for drivers to present their RX timestamps, but
other drivers (sja1105) have established a simple mechanism to carry
their RX timestamp from dsa_device_ops :: rcv() all the way to
dsa_switch_ops :: port_rxtstamp() and even later. That mechanism is to
simply save the partial timestamp to the skb->cb, and complete it later.
Question: why don't we simply populate the skb's struct
skb_shared_hwtstamps from ocelot_rcv(), and bother with this
complication of propagating the timestamp to felix_rxtstamp()?
Answer: dsa_switch_ops :: port_rxtstamp() answers the question whether
PTP packets need sleepable context to retrieve the full RX timestamp.
Currently felix_rxtstamp() answers "no, thanks" to that question, and
calls ocelot_ptp_gettime64() from softirq atomic context. This is
understandable, since Felix VSC9959 is a PCIe memory-mapped switch, so
hardware access does not require sleeping. But the felix driver is
preparing for the introduction of other switches where hardware access
is over a slow bus like SPI or MDIO:
https://lore.kernel.org/lkml/20210814025003.2449143-1-colin.foster@in-advantage.com/
So I would like to keep this code structure, so the rework needed when
that driver will need PTP support will be minimal (answer "yes, I need
deferred context for this skb's RX timestamp", then the partial
timestamp will still be found in the skb->cb.
Fixes: 33c0563de055 ("net: dsa: tag_ocelot: use VLAN information from tagging header when available") Reported-by: Po Liu <po.liu@nxp.com> Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Tue, 2 Nov 2021 18:30:41 +0000 (19:30 +0100)]
net: dsa: qca8k: make sure PAD0 MAC06 exchange is disabled
Some device set MAC06 exchange in the bootloader. This cause some
problem as we don't support this strange mode and we just set the port6
as the primary CPU port. With MAC06 exchange, PAD0 reg configure port6
instead of port0. Add an extra check and explicitly disable MAC06 exchange
to correctly configure the port PAD config.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Fixes: ea222b7df9d9 ("net: dsa: qca8k: add support for cpu port 6") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ziyang Xuan [Tue, 2 Nov 2021 02:12:18 +0000 (10:12 +0800)]
net: vlan: fix a UAF in vlan_dev_real_dev()
The real_dev of a vlan net_device may be freed after
unregister_vlan_dev(). Access the real_dev continually by
vlan_dev_real_dev() will trigger the UAF problem for the
real_dev like following:
Move the put_device(real_dev) to vlan_dev_free(). Ensure
real_dev not be freed before vlan_dev unregistered.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+e4df4e1389e28972e955@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Wed, 3 Nov 2021 08:28:43 +0000 (16:28 +0800)]
net: udp6: replace __UDP_INC_STATS() with __UDP6_INC_STATS()
__UDP_INC_STATS() is used in udpv6_queue_rcv_one_skb() when encap_rcv()
fails. __UDP6_INC_STATS() should be used here, so replace it with
__UDP6_INC_STATS().
Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 2 Nov 2021 22:02:36 +0000 (15:02 -0700)]
ethtool: fix ethtool msg len calculation for pause stats
ETHTOOL_A_PAUSE_STAT_MAX is the MAX attribute id,
so we need to subtract non-stats and add one to
get a count (IOW -2+1 == -1).
Otherwise we'll see:
ethnl cmd 21: calculated reply length 40, but consumed 52
Fixes: 0cd023398833 ("ethtool: add standard pause stats") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Talal Ahmad [Wed, 3 Nov 2021 02:58:44 +0000 (22:58 -0400)]
net: avoid double accounting for pure zerocopy skbs
Track skbs containing only zerocopy data and avoid charging them to
kernel memory to correctly account the memory utilization for
msg_zerocopy. All of the data in such skbs is held in user pages which
are already accounted to user. Before this change, they are charged
again in kernel in __zerocopy_sg_from_iter. The charging in kernel is
excessive because data is not being copied into skb frags. This
excessive charging can lead to kernel going into memory pressure
state which impacts all sockets in the system adversely. Mark pure
zerocopy skbs with a SKBFL_PURE_ZEROCOPY flag and remove
charge/uncharge for data in such skbs.
Initially, an skb is marked pure zerocopy when it is empty and in
zerocopy path. skb can then change from a pure zerocopy skb to mixed
data skb (zerocopy and copy data) if it is at tail of write queue and
there is room available in it and non-zerocopy data is being sent in
the next sendmsg call. At this time sk_mem_charge is done for the pure
zerocopied data and the pure zerocopy flag is unmarked. We found that
this happens very rarely on workloads that pass MSG_ZEROCOPY.
A pure zerocopy skb can later be coalesced into normal skb if they are
next to each other in queue but this patch prevents coalescing from
happening. This avoids complexity of charging when skb downgrades from
pure zerocopy to mixed. This is also rare.
In sk_wmem_free_skb, if it is a pure zerocopy skb, an sk_mem_uncharge
for SKB_TRUESIZE(skb_end_offset(skb)) is done for sk_mem_charge in
tcp_skb_entail for an skb without data.
Testing with the msg_zerocopy.c benchmark between two hosts(100G nics)
with zerocopy showed that before this patch the 'sock' variable in
memory.stat for cgroup2 that tracks sum of sk_forward_alloc,
sk_rmem_alloc and sk_wmem_queued is around 1822720 and with this
change it is 0. This is due to no charge to sk_forward_alloc for
zerocopy data and shows memory utilization for kernel is lowered.
Signed-off-by: Talal Ahmad <talalahmad@google.com> Acked-by: Arjun Roy <arjunroy@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lin Ma [Tue, 2 Nov 2021 08:10:21 +0000 (16:10 +0800)]
NFC: add necessary privilege flags in netlink layer
The CAP_NET_ADMIN checks are needed to prevent attackers faking a
device under NCIUARTSETDRIVER and exploit privileged commands.
This patch add GENL_ADMIN_PERM flags in genl_ops to fulfill the check.
Except for commands like NFC_CMD_GET_DEVICE, NFC_CMD_GET_TARGET,
NFC_CMD_LLC_GET_PARAMS, and NFC_CMD_GET_SE, which are mainly information-
read operations.
Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 3 Nov 2021 11:09:21 +0000 (11:09 +0000)]
Merge branch 'sctp-=security-hook-fixes'
Xin Long says:
====================
security: fixups for the security hooks in sctp
There are a couple of problems in the currect security hooks in sctp:
1. The hooks incorrectly treat sctp_endpoint in SCTP as request_sock in
TCP, while it's in fact no more than an extension of the sock, and
represents the local host. It is created when sock is created, not
when a conn request comes. sctp_association is actually the correct
one to represent the connection, and created when a conn request
arrives.
2. security_sctp_assoc_request() hook should also be called in processing
COOKIE ECHO, as that's the place where the real assoc is created and
used in the future.
The problems above may cause accept sk, peeloff sk or client sk having
the incorrect security labels.
So this patchset is to change some hooks and pass asoc into them and save
these secids into asoc, as well as add the missing sctp_assoc_request
hook into the COOKIE ECHO processing.
v1->v2:
- See each patch, and thanks the help from Ondrej, Paul and Richard.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 2 Nov 2021 12:02:50 +0000 (08:02 -0400)]
security: implement sctp_assoc_established hook in selinux
Different from selinux_inet_conn_established(), it also gives the
secid to asoc->peer_secid in selinux_sctp_assoc_established(),
as one UDP-type socket may have more than one asocs.
Note that peer_secid in asoc will save the peer secid for this
asoc connection, and peer_sid in sksec will just keep the peer
secid for the latest connection. So the right use should be do
peeloff for UDP-type socket if there will be multiple asocs in
one socket, so that the peeloff socket has the right label for
its asoc.
v1->v2:
- call selinux_inet_conn_established() to reduce some code
duplication in selinux_sctp_assoc_established(), as Ondrej
suggested.
- when doing peeloff, it calls sock_create() where it actually
gets secid for socket from socket_sockcreate_sid(). So reuse
SECSID_WILD to ensure the peeloff socket keeps using that
secid after calling selinux_sctp_sk_clone() for client side.
Fixes: 42caf3423dc3 ("security: Add support for SCTP security hooks") Reported-by: Prashanth Prahlad <pprahlad@redhat.com> Reviewed-by: Richard Haines <richard_c_haines@btinternet.com> Tested-by: Richard Haines <richard_c_haines@btinternet.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 2 Nov 2021 12:02:49 +0000 (08:02 -0400)]
security: add sctp_assoc_established hook
security_sctp_assoc_established() is added to replace
security_inet_conn_established() called in
sctp_sf_do_5_1E_ca(), so that asoc can be accessed in security
subsystem and save the peer secid to asoc->peer_secid.
v1->v2:
- fix the return value of security_sctp_assoc_established() in
security.h, found by kernel test robot and Ondrej.
Fixes: 42caf3423dc3 ("security: Add support for SCTP security hooks") Reported-by: Prashanth Prahlad <pprahlad@redhat.com> Reviewed-by: Richard Haines <richard_c_haines@btinternet.com> Tested-by: Richard Haines <richard_c_haines@btinternet.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 2 Nov 2021 12:02:48 +0000 (08:02 -0400)]
security: call security_sctp_assoc_request in sctp_sf_do_5_1D_ce
The asoc created when receives the INIT chunk is a temporary one, it
will be deleted after INIT_ACK chunk is replied. So for the real asoc
created in sctp_sf_do_5_1D_ce() when the COOKIE_ECHO chunk is received,
security_sctp_assoc_request() should also be called.
v1->v2:
- fix some typo and grammar errors, noticed by Ondrej.
Fixes: 42caf3423dc3 ("security: Add support for SCTP security hooks") Reported-by: Prashanth Prahlad <pprahlad@redhat.com> Reviewed-by: Richard Haines <richard_c_haines@btinternet.com> Tested-by: Richard Haines <richard_c_haines@btinternet.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 2 Nov 2021 12:02:47 +0000 (08:02 -0400)]
security: pass asoc to sctp_assoc_request and sctp_sk_clone
This patch is to move secid and peer_secid from endpoint to association,
and pass asoc to sctp_assoc_request and sctp_sk_clone instead of ep. As
ep is the local endpoint and asoc represents a connection, and in SCTP
one sk/ep could have multiple asoc/connection, saving secid/peer_secid
for new asoc will overwrite the old asoc's.
Note that since asoc can be passed as NULL, security_sctp_assoc_request()
is moved to the place right after the new_asoc is created in
sctp_sf_do_5_1B_init() and sctp_sf_do_unexpected_init().
v1->v2:
- fix the description of selinux_netlbl_skbuff_setsid(), as Jakub noticed.
- fix the annotation in selinux_sctp_assoc_request(), as Richard Noticed.
Fixes: 42caf3423dc3 ("security: Add support for SCTP security hooks") Reported-by: Prashanth Prahlad <pprahlad@redhat.com> Reviewed-by: Richard Haines <richard_c_haines@btinternet.com> Tested-by: Richard Haines <richard_c_haines@btinternet.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Wed, 3 Nov 2021 02:44:59 +0000 (10:44 +0800)]
kselftests/net: add missed toeplitz.sh/toeplitz_client.sh to Makefile
When generating the selftests to another folder, the toeplitz.sh
and toeplitz_client.sh are missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Making them under TEST_PROGS_EXTENDED as they test NIC hardware features
and are not intended to be run from kselftests.
Fixes: 541909e310e2 ("selftests/net: toeplitz test") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Wed, 3 Nov 2021 02:44:58 +0000 (10:44 +0800)]
kselftests/net: add missed vrf_strict_mode_test.sh test to Makefile
When generating the selftests to another folder, the
vrf_strict_mode_test.sh test will miss as it is not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Fixes: 2ccbce505a8a ("selftests: add selftest for the VRF strict mode") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Wed, 3 Nov 2021 02:44:57 +0000 (10:44 +0800)]
kselftests/net: add missed SRv6 tests
When generating the selftests to another folder, the SRv6 tests are
missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Fixes: 9a4f76db63f9 ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior") Fixes: 8cb9e2e12b44 ("selftests: add selftest for the SRv6 End.DT4 behavior") Fixes: 963f066ff904 ("selftests: add selftest for the SRv6 End.DT6 (VRF) behavior") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Wed, 3 Nov 2021 02:44:56 +0000 (10:44 +0800)]
kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile
When generating the selftests to another folder, the include file
setup_loopback.sh/setup_veth.sh for gro.sh/gre_gro.sh are missing as
they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Fixes: eb1e97766243 ("selftests/net: GRO coalesce test") Fixes: c190dcf9c63b ("selftests/net: allow GRO coalesce test on veth") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Wed, 3 Nov 2021 02:44:55 +0000 (10:44 +0800)]
kselftests/net: add missed icmp.sh test to Makefile
When generating the selftests to another folder, the icmp.sh test will
miss as it is not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Fixes: b74055971b84 ("selftests/net: Add icmp.sh for testing ICMP dummy address responses") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 2 Nov 2021 00:45:55 +0000 (17:45 -0700)]
net: add and use skb_unclone_keeptruesize() helper
While commit 72936b487089 ("net: fix up truesize of cloned
skb in skb_prepare_for_shift()") fixed immediate issues found
when KFENCE was enabled/tested, there are still similar issues,
when tcp_trim_head() hits KFENCE while the master skb
is cloned.
This happens under heavy networking TX workloads,
when the TX completion might be delayed after incoming ACK.
This patch fixes the WARNING in sk_stream_kill_queues
when sk->sk_mem_queued/sk->sk_forward_alloc are not zero.
In function ‘prestera_hw_build_tests’,
inlined from ‘prestera_hw_switch_init’ at drivers/net/ethernet/marvell/prestera/prestera_hw.c:788:2:
././include/linux/compiler_types.h:335:38: error: call to ‘__compiletime_assert_345’ declared with attribute error: BUILD_BUG_ON failed: sizeof(struct prestera_msg_switch_attr_req) != 16
...
The driver assumes structure members are naturally aligned, but does not
add explicit padding, thus breaking architectures where integral values
are not always naturally aligned (e.g. on m68k, __alignof(int) is 2, not
4).
Wan Jiabing [Tue, 2 Nov 2021 02:03:12 +0000 (22:03 -0400)]
bnxt_en: avoid newline at end of message in NL_SET_ERR_MSG_MOD
Fix following coccicheck warning:
./drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:446:8-56: WARNING
avoid newline at end of message in NL_SET_ERR_MSG_MOD.
1) Fix mac address UAF reported by KASAN in nfnetlink_queue,
from Florian Westphal.
2) Autoload genetlink IPVS on demand, from Thomas Weissschuh.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
ipvs: autoload ipvs on genl access
netfilter: nfnetlink_queue: fix OOB when mac header was cleared
====================
Maxim Kiselev [Mon, 1 Nov 2021 15:23:41 +0000 (18:23 +0300)]
net: davinci_emac: Fix interrupt pacing disable
This patch allows to use 0 for `coal->rx_coalesce_usecs` param to
disable rx irq coalescing.
Previously we could enable rx irq coalescing via ethtool
(For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable
it because this part rejects 0 value:
Linus Torvalds [Tue, 2 Nov 2021 14:56:47 +0000 (07:56 -0700)]
Merge tag 'x86_core_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Do not #GP on userspace use of CLI/STI but pretend it was a NOP to
keep old userspace from breaking. Adjust the corresponding iopl
selftest to that.
- Improve stack overflow warnings to say which stack got overflowed and
raise the exception stack sizes to 2 pages since overflowing the
single page of exception stack is very easy to do nowadays with all
the tracing machinery enabled. With that, rip out the custom mapping
of AMD SEV's too.
- A bunch of changes in preparation for FGKASLR like supporting more
than 64K section headers in the relocs tool, correct ORC lookup table
size to cover the whole kernel .text and other adjustments.
* tag 'x86_core_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86/iopl: Adjust to the faked iopl CLI/STI usage
vmlinux.lds.h: Have ORC lookup cover entire _etext - _stext
x86/boot/compressed: Avoid duplicate malloc() implementations
x86/boot: Allow a "silent" kaslr random byte fetch
x86/tools/relocs: Support >64K section headers
x86/sev: Make the #VC exception stacks part of the default stacks storage
x86: Increase exception stack sizes
x86/mm/64: Improve stack overflow warnings
x86/iopl: Fake iopl(3) CLI/STI usage
Linus Torvalds [Tue, 2 Nov 2021 13:20:58 +0000 (06:20 -0700)]
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
Linus Torvalds [Tue, 2 Nov 2021 04:24:02 +0000 (21:24 -0700)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Delay boot-up self-test for built-in algorithms
Algorithms:
- Remove fallback path on arm64 as SIMD now runs with softirq off
Drivers:
- Add Keem Bay OCS ECC Driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (61 commits)
crypto: testmgr - fix wrong key length for pkcs1pad
crypto: pcrypt - Delay write to padata->info
crypto: ccp - Make use of the helper macro kthread_run()
crypto: sa2ul - Use the defined variable to clean code
crypto: s5p-sss - Add error handling in s5p_aes_probe()
crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC Driver
dt-bindings: crypto: Add Keem Bay ECC bindings
crypto: ecc - Export additional helper functions
crypto: ecc - Move ecc.h to include/crypto/internal
crypto: engine - Add KPP Support to Crypto Engine
crypto: api - Do not create test larvals if manager is disabled
crypto: tcrypt - fix skcipher multi-buffer tests for 1420B blocks
hwrng: s390 - replace snprintf in show functions with sysfs_emit
crypto: octeontx2 - set assoclen in aead_do_fallback()
crypto: ccp - Fix whitespace in sev_cmd_buffer_len()
hwrng: mtk - Force runtime pm ops for sleep ops
crypto: testmgr - Only disable migration in crypto_disable_simd_for_test()
crypto: qat - share adf_enable_pf2vf_comms() from adf_pf2vf_msg.c
crypto: qat - extract send and wait from adf_vf2pf_request_version()
crypto: qat - add VF and PF wrappers to common send function
...
Linus Torvalds [Tue, 2 Nov 2021 04:17:39 +0000 (21:17 -0700)]
Merge tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Add some additional audit logging to capture the openat2() syscall
open_how struct info.
Previous variations of the open()/openat() syscalls allowed audit
admins to inspect the syscall args to get the information contained in
the new open_how struct used in openat2()"
* tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: return early if the filter rule has a lower priority
audit: add OPENAT2 record to list "how" info
audit: add support for the openat2 syscall
audit: replace magic audit syscall class numbers with macros
lsm_audit: avoid overloading the "key" audit field
audit: Convert to SPDX identifier
audit: rename struct node to struct audit_node to prevent future name collisions
Linus Torvalds [Tue, 2 Nov 2021 04:06:18 +0000 (21:06 -0700)]
Merge tag 'selinux-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add LSM/SELinux/Smack controls and auditing for io-uring.
As usual, the individual commit descriptions have more detail, but we
were basically missing two things which we're adding here:
+ establishment of a proper audit context so that auditing of
io-uring ops works similarly to how it does for syscalls (with
some io-uring additions because io-uring ops are *not* syscalls)
+ additional LSM hooks to enable access control points for some of
the more unusual io-uring features, e.g. credential overrides.
The additional audit callouts and LSM hooks were done in conjunction
with the io-uring folks, based on conversations and RFC patches
earlier in the year.
- Fixup the binder credential handling so that the proper credentials
are used in the LSM hooks; the commit description and the code
comment which is removed in these patches are helpful to understand
the background and why this is the proper fix.
- Enable SELinux genfscon policy support for securityfs, allowing
improved SELinux filesystem labeling for other subsystems which make
use of securityfs, e.g. IMA.
* tag 'selinux-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
security: Return xattr name from security_dentry_init_security()
selinux: fix a sock regression in selinux_ip_postroute_compat()
binder: use cred instead of task for getsecid
binder: use cred instead of task for selinux checks
binder: use euid from cred instead of using task
LSM: Avoid warnings about potentially unused hook variables
selinux: fix all of the W=1 build warnings
selinux: make better use of the nf_hook_state passed to the NF hooks
selinux: fix race condition when computing ocontext SIDs
selinux: remove unneeded ipv6 hook wrappers
selinux: remove the SELinux lockdown implementation
selinux: enable genfscon labeling for securityfs
Smack: Brutalist io_uring support
selinux: add support for the io_uring access controls
lsm,io_uring: add LSM hooks to io_uring
io_uring: convert io_uring to the secure anon inode interface
fs: add anon_inode_getfile_secure() similar to anon_inode_getfd_secure()
audit: add filtering for io_uring records
audit,io_uring,io-wq: add some basic audit support to io_uring
audit: prepare audit_context for use in calling contexts beyond syscalls
Linus Torvalds [Tue, 2 Nov 2021 03:25:38 +0000 (20:25 -0700)]
Merge tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Miscellaneous fixes
- Torture-test updates for smp_call_function(), most notably improved
checking of module parameters.
- Tasks-trace RCU updates that fix a number of rare but important
race-condition bugs.
- Other torture-test updates, most notably better checking of module
parameters. In addition, rcutorture may once again be run on
CONFIG_PREEMPT_RT kernels.
- Torture-test scripting updates, most notably specifying the new
CONFIG_KCSAN_STRICT kconfig option rather than maintaining an
ever-changing list of individual KCSAN kconfig options.
* tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (46 commits)
rcu: Fix rcu_dynticks_curr_cpu_in_eqs() vs noinstr
rcu: Always inline rcu_dynticks_task*_{enter,exit}()
torture: Make kvm-remote.sh print size of downloaded tarball
torture: Allot 1G of memory for scftorture runs
tools/rcu: Add an extract-stall script
scftorture: Warn on individual scf_torture_init() error conditions
scftorture: Count reschedule IPIs
scftorture: Account for weight_resched when checking for all zeroes
scftorture: Shut down if nonsensical arguments given
scftorture: Allow zero weight to exclude an smp_call_function*() category
rcu: Avoid unneeded function call in rcu_read_unlock()
rcu-tasks: Update comments to cond_resched_tasks_rcu_qs()
rcu-tasks: Fix IPI failure handling in trc_wait_for_one_reader
rcu-tasks: Fix read-side primitives comment for call_rcu_tasks_trace
rcu-tasks: Clarify read side section info for rcu_tasks_rude GP primitives
rcu-tasks: Correct comparisons for CPU numbers in show_stalled_task_trace
rcu-tasks: Correct firstreport usage in check_all_holdout_tasks_trace
rcu-tasks: Fix s/rcu_add_holdout/trc_add_holdout/ typo in comment
rcu-tasks: Move RTGS_WAIT_CBS to beginning of rcu_tasks_kthread() loop
rcu-tasks: Fix s/instruction/instructions/ typo in comment
...
Linus Torvalds [Tue, 2 Nov 2021 03:05:19 +0000 (20:05 -0700)]
Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).
The main changes are:
1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.
2) Parallelize bpf test_progs, from Yucong and Andrii.
3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.
4) Improve bpf selftests on s390, from Ilya.
5) bloomfilter bpf map type, from Joanne.
6) Big improvements to JIT tests especially on Mips, from Johan.
7) Support kernel module function calls from bpf, from Kumar.
8) Support typeless and weak ksym in light skeleton, from Kumar.
9) Disallow unprivileged bpf by default, from Pawan.
10) BTF_KIND_DECL_TAG support, from Yonghong.
11) Various bpftool cleanups, from Quentin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
bpf: Factor out helpers for ctx access checking
bpf: Factor out a helper to prepare trampoline for struct_ops prog
selftests, bpf: Fix broken riscv build
riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
tools, build: Add RISC-V to HOSTARCH parsing
riscv, bpf: Increase the maximum number of iterations
selftests, bpf: Add one test for sockmap with strparser
selftests, bpf: Fix test_txmsg_ingress_parser error
...
====================
In most situations the neighbor discovery cache should be cleared on a
NOCARRIER event which is currently done unconditionally. But for wireless
roams the neighbor discovery cache can and should remain intact since
the underlying network has not changed.
This patch introduces a sysctl option ndisc_evict_nocarrier which can
be disabled by a wireless supplicant during a roam. This allows packets
to be sent after a roam immediately without having to wait for
neighbor discovery.
A user reported roughly a 1 second delay after a roam before packets
could be sent out (note, on IPv4). This delay was due to the ARP
cache being cleared. During testing of this same scenario using IPv6
no delay was noticed, but regardless there is no reason to clear
the ndisc cache for wireless roams.
Signed-off-by: James Prestwood <prestwoj@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change introduces a new sysctl parameter, arp_evict_nocarrier.
When set (default) the ARP cache will be cleared on a NOCARRIER event.
This new option has been defaulted to '1' which maintains existing
behavior.
Clearing the ARP cache on NOCARRIER is relatively new, introduced by:
The reason for this changes is to prevent the ARP cache from being
cleared when a wireless device roams. Specifically for wireless roams
the ARP cache should not be cleared because the underlying network has not
changed. Clearing the ARP cache in this case can introduce significant
delays sending out packets after a roam.
After some investigation it was found that the kernel was holding onto
packets until ARP finished which resulted in this 1 second delay. It
was also found that the first ARP who-has was never responded to,
which is actually what caues the delay. This change is more or less
working around this behavior, but again, there is no reason to clear
the cache on a roam anyways.
As for the unanswered who-has, we know the packet made it OTA since
it was seen while monitoring. Why it never received a response is
unknown. In any case, since this is a problem on the AP side of things
all that can be done is to work around it until it is solved.
Some background on testing/reproducing the packet delay:
Hardware:
- 2 access points configured for Fast BSS Transition (Though I don't
see why regular reassociation wouldn't have the same behavior)
- Wireless station running IWD as supplicant
- A device on network able to respond to pings (I used one of the APs)
Procedure:
- Connect to first AP
- Ping once to establish an ARP entry
- Start a tcpdump
- Roam to second AP
- Wait for operstate UP event, and note the timestamp
- Start pinging
Results:
Below is the tcpdump after UP. It was recorded the interface went UP at
10:42:01.432875.
10:42:01.461871 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28
10:42:02.497976 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28
10:42:02.507162 ARP, Reply 192.168.254.1 is-at ac:86:74:55:b0:20, length 46
10:42:02.507185 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 1, length 64
10:42:02.507205 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 2, length 64
10:42:02.507212 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 3, length 64
10:42:02.507219 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 4, length 64
10:42:02.507225 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 5, length 64
10:42:02.507232 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 6, length 64
10:42:02.515373 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 1, length 64
10:42:02.521399 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 2, length 64
10:42:02.521612 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 3, length 64
10:42:02.521941 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 4, length 64
10:42:02.522419 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 5, length 64
10:42:02.523085 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 6, length 64
You can see the first ARP who-has went out very quickly after UP, but
was never responded to. Nearly a second later the kernel retries and
gets a response. Only then do the ping packets go out. If an ARP entry
is manually added prior to UP (after the cache is cleared) it is seen
that the first ping is never responded to, so its not only an issue with
ARP but with data packets in general.
As mentioned prior, the wireless interface was also monitored to verify
the ping/ARP packet made it OTA which was observed to be true.
Signed-off-by: James Prestwood <prestwoj@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 2 Nov 2021 02:16:49 +0000 (19:16 -0700)]
Merge tag 'hwmon-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New driver:
- Maxim MAX6620
Notable functional enhancements:
- Add Asus WMI support to nct6775 driver, and list boards supporting
it
- Move TMP461 support from tm401 driver to lm90 driver
- Add support for fanX_min, fanX_max and fanX_target to dell-smm
driver, and clean it up while doing so
- Extend mlxreg-fan driver to support multiple cooling devices and
multiple PWM channels. Also increase number of supported fan
tachometers.
- Add a new customer ID (for ASRock) to nct6683 driver
- Make temperature/voltage sensors on nct7802 configurable
- Add mfg_id debugfs entry to pmbus/ibm-cffps driver
- Support configurable sense resistor values in pmbus/lm25066, and
fix various coefficients
- Use generic notification mechanism in raspberrypi driver
Notable cleanups:
- Convert various devicetree bindings to dtschema, and add missing
bindings
- Convert i5500_temp and tmp103 drivers to
devm_hwmon_device_register_with_info
- Clean up non-bool "valid" data fields
- Improve devicetree configurability for tmp421 driver"
* tag 'hwmon-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (73 commits)
hwmon: (nct7802) Add of_node_put() before return
hwmon: (tmp401) Drop support for TMP461
hwmon: (lm90) Add basic support for TI TMP461
hwmon: (lm90) Introduce flag indicating extended temperature support
hwmon: (nct6775) add ProArt X570-CREATOR WIFI.
hwmon: (nct7802) Make temperature/voltage sensors configurable
dt-bindings: hwmon: Add nct7802 bindings
hwmon: (dell-smm) Speed up setting of fan speed
hwmon: (dell-smm) Add comment explaining usage of i8k_config_data[]
hwmon: (dell-smm) Return -ENOIOCTLCMD instead of -EINVAL
hwmon: (dell-smm) Use strscpy_pad()
hwmon: (dell-smm) Sort includes in alphabetical order
hwmon: (tmp421) Add of_node_put() before return
hwmon: (max31722) Warn about failure to put device in stand-by in .remove()
hwmon: (acpi_power_meter) Use acpi_bus_get_acpi_device()
hwmon: (dell-smm) Add support for fanX_min, fanX_max and fanX_target
dt-bindings: hwmon: allow specifying channels for tmp421
hwmon: (tmp421) ignore non-channel related DT nodes
hwmon: (tmp421) update documentation
hwmon: (tmp421) support HWMON_T_ENABLE
...
Linus Torvalds [Tue, 2 Nov 2021 02:09:04 +0000 (19:09 -0700)]
Merge tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI, there's been a bit of cleanup
to the core from Uwe but nothing functionality wise.
We have added several new drivers, Cadence XSPI, Ingenic JZ47xx,
Qualcomm SC7280 and SC7180 and Xilinx Versal OSPI"
* tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (41 commits)
spi: Convert NXP flexspi to json schema
spi: spi-geni-qcom: Add support for GPI dma
spi: fsi: Fix contention in the FSI2SPI engine
spi: spi-rpc-if: Check return value of rpcif_sw_init()
spi: tegra210-quad: Put device into suspend on driver removal
spi: tegra20-slink: Put device into suspend on driver removal
spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
spi: at91-usart: replacing legacy gpio interface for gpiod
spi: replace snprintf in show functions with sysfs_emit
spi: cadence: Add of_node_put() before return
spi: orion: Add of_node_put() before goto
spi: cadence-quadspi: fix dma_unmap_single() call
spi: tegra20: fix build with CONFIG_PM_SLEEP=n
spi: bcm-qspi: add support for 3-wire mode for half duplex transfer
spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode
spi: Make several public functions private to spi.c
spi: Reorder functions to simplify the next commit
spi: Remove unused function spi_busnum_to_master()
spi: Move comment about chipselect check to the right place
spi: fsi: Print status on error
...
Linus Torvalds [Tue, 2 Nov 2021 02:04:47 +0000 (19:04 -0700)]
Merge tag 'regulator-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Thanks to the removal of the unused TPS80021 driver the regulator
updates for this cycle actually have a negative diffstat.
Otherwise it's been quite a quiet release, lots of fixes and small
improvements with the biggest individual changes being several
conversions of DT bindings to YAML format"
* tag 'regulator-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
regulator: Don't error out fixed regulator in regulator_sync_voltage()
regulator: tps80031: Remove driver
regulator: Fix SY7636A breakage
regulator: uniphier: Add binding for NX1 SoC
regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC
regulator: qcom,rpmh: Add compatible for PM6350
regulator: qcom-rpmh: Add PM6350 regulators
regulator: sy7636a: Remove requirement on sy7636a mfd
regulator: tps62360: replacing legacy gpio interface for gpiod
regulator: lp872x: Remove lp872x_dvs_state
regulator: lp872x: replacing legacy gpio interface for gpiod
regulator: dt-bindings: samsung,s5m8767: convert to dtschema
regulator: dt-bindings: samsung,s2mpa01: convert to dtschema
regulator: dt-bindings: samsung,s2m: convert to dtschema
dt-bindings: clock: samsung,s2mps11: convert to dtschema
regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property
regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled
regulator: dt-bindings: maxim,max8973: convert to dtschema
regulator: dt-bindings: maxim,max8997: convert to dtschema
regulator: dt-bindings: maxim,max8952: convert to dtschema
...
Linus Torvalds [Tue, 2 Nov 2021 02:01:51 +0000 (19:01 -0700)]
Merge tag 'regmap-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap update from Mark Brown:
"A single change to use the maximum transfer and message sizes
advertised by SPI controllers to configure limits within the
regmap core, ensuring better interoperation"
* tag 'regmap-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: spi: Set regmap max raw r/w from max_transfer_size
Linus Torvalds [Tue, 2 Nov 2021 01:58:13 +0000 (18:58 -0700)]
Merge tag 'mailbox-v5.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"qcom:
- add support for qcm2290
- consolidate msm8994 type apcs_data
mtk:
- fix clock id usage
apple:
- add driver for ASC/M3 controllers
pcc:
- reorganise PCC pcc_mbox_request_channel
- add support for PCCT extended PCC subspaces
misc:
- make use of devm_platform_ioremap_resource()
- change Altera, PCC and Apple mailbox maintainers"
* tag 'mailbox-v5.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (38 commits)
mailbox: imx: support i.MX8ULP S4 MU
dt-bindings: mailbox: imx-mu: add i.MX8ULP S400 MU support
ACPI/PCC: Add maintainer for PCC mailbox driver
mailbox: pcc: Move bulk of PCCT parsing into pcc_mbox_probe
mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)
mailbox: pcc: Drop handling invalid bit-width in {read,write}_register
mailbox: pcc: Avoid accessing PCCT table in pcc_send_data and pcc_mbox_irq
mailbox: pcc: Add PCC register bundle and associated accessor functions
mailbox: pcc: Rename doorbell ack to platform interrupt ack register
mailbox: pcc: Use PCC mailbox channel pointer instead of standard
mailbox: pcc: Add pcc_mbox_chan structure to hold shared memory region info
mailbox: pcc: Consolidate subspace doorbell register parsing
mailbox: pcc: Consolidate subspace interrupt information parsing
mailbox: pcc: Refactor all PCC channel information into a structure
mailbox: pcc: Fix kernel doc warnings
mailbox: apple: Add driver for Apple mailboxes
dt-bindings: mailbox: Add Apple mailbox bindings
MAINTAINERS: Add Apple mailbox files
mailbox: mtk-cmdq: Fix local clock ID usage
mailbox: mtk-cmdq: Validate alias_id on probe
...
Linus Torvalds [Tue, 2 Nov 2021 01:55:12 +0000 (18:55 -0700)]
Merge tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC and MEMSTICK updates from Ulf Hansson:
"MMC core:
- Update maintainer and URL for the mmc-utils
- Set default label for slot-gpio in case of no con-id
- Convert MMC card DT bindings to a schema
- Add optional host specific tuning support for eMMC HS400
- Add error handling of add_disk()
MMC host:
- mtk-sd: Add host specific tuning support for eMMC HS400
- mtk-sd: Make DMA handling more robust
- dw_mmc: Prevent hangs for some data writes
- dw_mmc: Move away from using the ->init_card() callback
- mxs-mmc: Manage the regulator in the error path and in ->remove()
- sdhci-cadence: Add support for the Microchip MPFS variant
- sdhci-esdhc-imx: Add support for the NXP S32G2 variant
- sdhci-of-arasan: Add support for the Intel Thunder Bay variant
- sdhci-omap: Prepare to support more SoCs
- sdhci-omap: Add support for omap3 and omap4 variants
- sdhci-omap: Add support for power management
- sdhci-omap: Add support for system wakeups
- sdhci-msm: Add support for the msm8226 variant
- sdhci-sprd: Verify that the DLL locks according to spec
MEMSTICK:
- Add error handling of add_disk()
- A couple of small fixes and improvements"
* tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (60 commits)
docs: mmc: update maintainer name and URL
mmc: dw_mmc: exynos: Fix spelling mistake "candiates" -> candidates
MAINTAINERS: drop obsolete file pattern in SDHCI DRIVER section
mmc: sdhci-esdhc-imx: add NXP S32G2 support
dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G2 support
mmc: dw_mmc: Drop use of ->init_card() callback
mmc: sdhci-omap: Fix build if CONFIG_PM_SLEEP is not set
mmc: sdhci-omap: Remove forward declaration of sdhci_omap_context_save()
memstick: r592: Fix a UAF bug when removing the driver
mmc: mxs-mmc: disable regulator on error and in the remove function
mmc: sdhci-omap: Configure optional wakeirq
mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM
mmc: sdhci-omap: Implement PM runtime functions
mmc: sdhci-omap: Add omap_offset to support omap3 and earlier
mmc: sdhci-omap: Handle voltages to add support omap4
dt-bindings: sdhci-omap: Update binding for legacy SoCs
mmc: sdhci-pci: Remove dead code (rst_n_gpio et al)
mmc: sdhci-pci: Remove dead code (cd_gpio, cd_irq et al)
mmc: sdhci-pci: Remove dead code (struct sdhci_pci_data et al)
mmc: sdhci: Remove unused prototype declaration in the header
...
Linus Torvalds [Tue, 2 Nov 2021 01:53:03 +0000 (18:53 -0700)]
Merge tag 'for-linus-5.16-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI driver updates from Corey Minyard:
"A new type of low-level IPMI driver is added for direct communication
over the IPMI message bus without a BMC between the driver and the
bus.
Other than that, lots of little bug fixes and enhancements"
* tag 'for-linus-5.16-1' of https://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc: Fix a memory leak in the error handling path of 'kcs_bmc_serio_add_device()'
char: ipmi: replace snprintf in show functions with sysfs_emit
ipmi: ipmb: fix dependencies to eliminate build error
ipmi:ipmb: Add OF support
ipmi: bt: Add ast2600 compatible string
ipmi: bt-bmc: Use registers directly
ipmi: ipmb: Fix off-by-one size check on rcvlen
ipmi:ssif: Use depends on, not select, for I2C
ipmi: Add docs for the IPMI IPMB driver
ipmi: Add docs for IPMB direct addressing
ipmi:ipmb: Add initial support for IPMI over IPMB
ipmi: Add support for IPMB direct messages
ipmi: Export ipmb_checksum()
ipmi: Fix a typo
ipmi: Check error code before processing BMC response
ipmi:devintf: Return a proper error when recv buffer too small
ipmi: Disable some operations during a panic
ipmi:watchdog: Set panic count to proper value on a panic
Linus Torvalds [Tue, 2 Nov 2021 01:49:25 +0000 (18:49 -0700)]
Merge tag 'leds-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Johannes pointed out that locking is still problematic with triggers
list, attempt to solve that by using RCU"
* tag 'leds-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: trigger: Disable CPU trigger on PREEMPT_RT
leds: trigger: use RCU to protect the led_cdevs list
led-class-flash: fix -Wrestrict warning
Magnus Karlsson [Fri, 29 Oct 2021 09:01:11 +0000 (11:01 +0200)]
libbpf: Deprecate AF_XDP support
Deprecate AF_XDP support in libbpf ([0]). This has been moved to
libxdp as it is a better fit for that library. The AF_XDP support only
uses the public libbpf functions and can therefore just use libbpf as
a library from libxdp. The libxdp APIs are exactly the same so it
should just be linking with libxdp instead of libbpf for the AF_XDP
functionality. If not, please submit a bug report. Linking with both
libraries is supported but make sure you link in the correct order so
that the new functions in libxdp are used instead of the deprecated
ones in libbpf.
Libxdp can be found at https://github.com/xdp-project/xdp-tools.
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
./test_progs-no_alu32 -vv -t twfw
Before the 64-bit_into_32-bit fix:
19: (25) if r1 > 0x3f goto pc+6
R1_w=inv(id=0,umax_value=63,var_off=(0x0; 0xff),s32_max_value=255,u32_max_value=255)
and eventually:
invalid access to map value, value_size=8 off=7 size=8
R6 max value is outside of the allowed memory range
libbpf: failed to load object 'no_alu32/twfw.o'
After the fix:
19: (25) if r1 > 0x3f goto pc+6
R1_w=inv(id=0,umax_value=63,var_off=(0x0; 0x3f))
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
Before this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0xffffffff))
After this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0x1))
While processing BPF_JLE the reg_set_min_max() would set true_reg->umax_value = 1
and call __reg_combine_64_into_32(true_reg).
Without the fix it would not pass the condition:
if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value))
since umin_value == 0 at this point.
Before commit 258df190d92c the umin was incorrectly ingored.
The commit 258df190d92c fixed the correctness issue, but pessimized
propagation of 64-bit min max into 32-bit min max and corresponding var_off.
Linus Torvalds [Tue, 2 Nov 2021 00:34:02 +0000 (17:34 -0700)]
Merge tag 'Smack-for-5.16' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler:
"Multiple corrections to smackfs:
- a change for overlayfs support that corrects the initial attributes
on created files
- code clean-up for netlabel processing
- several fixes in smackfs for a variety of reasons
- Errors reported by W=1 have been addressed
All told, nothing challenging"
* tag 'Smack-for-5.16' of https://github.com/cschaufler/smack-next:
smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi
smackfs: use __GFP_NOFAIL for smk_cipso_doi()
Smack: fix W=1 build warnings
smack: remove duplicated hook function
Smack:- Use overlay inode label in smack_inode_copy_up()
smack: Guard smack_ipv6_lock definition within a SMACK_IPV6_PORT_LABELING block
smackfs: Fix use-after-free in netlbl_catmap_walk()
Linus Torvalds [Tue, 2 Nov 2021 00:32:22 +0000 (17:32 -0700)]
Merge tag 'fallthrough-fixes-clang-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo A. R. Silva:
"Fix some fall-through warnings when building with Clang and
-Wimplicit-fallthrough"
* tag 'fallthrough-fixes-clang-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
pcmcia: db1xxx_ss: Fix fall-through warning for Clang
MIPS: Fix fall-through warnings for Clang
scsi: st: Fix fall-through warning for Clang
Linus Torvalds [Tue, 2 Nov 2021 00:29:10 +0000 (17:29 -0700)]
Merge tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull hardening fixes and cleanups from Gustavo A. R. Silva:
"Various hardening fixes and cleanups that I've been collecting during
the last development cycle:
Fix -Wcast-function-type error:
- firewire: Remove function callback casts (Oscar Carter)
Fix application of sizeof operator:
- firmware/psci: fix application of sizeof to pointer (jing yangyang)
Replace open coded instances with size_t saturating arithmetic
helpers:
- assoc_array: Avoid open coded arithmetic in allocator arguments
(Len Baker)
- writeback: prefer struct_size over open coded arithmetic (Len
Baker)
- aio: Prefer struct_size over open coded arithmetic (Len Baker)
- dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
(Len Baker)
Flexible array transformation:
- KVM: PPC: Replace zero-length array with flexible array member (Len
Baker)
Use 2-factor argument multiplication form:
- nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R.
Silva)
- xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)"
* tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
firewire: Remove function callback casts
nouveau/svm: Use kvcalloc() instead of kvzalloc()
firmware/psci: fix application of sizeof to pointer
dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
KVM: PPC: Replace zero-length array with flexible array member
aio: Prefer struct_size over open coded arithmetic
writeback: prefer struct_size over open coded arithmetic
xfs: Use kvcalloc() instead of kvzalloc()
assoc_array: Avoid open coded arithmetic in allocator arguments
Linus Torvalds [Tue, 2 Nov 2021 00:25:09 +0000 (17:25 -0700)]
Merge tag 'seccomp-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"These are x86-specific, but I carried these since they're also
seccomp-specific.
This flips the defaults for spec_store_bypass_disable and
spectre_v2_user from "seccomp" to "prctl", as enough time has passed
to allow system owners to have updated the defensive stances of their
various workloads, and it's long overdue to unpessimize seccomp
threads.
Extensive rationale and details are in Andrea's main patch.
Summary:
- set spec_store_bypass_disable & spectre_v2_user to prctl (Andrea Arcangeli)"
* tag 'seccomp-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
x86: deduplicate the spectre_v2_user documentation
x86: change default to spec_store_bypass_disable=prctl spectre_v2_user=prctl
Linus Torvalds [Tue, 2 Nov 2021 00:12:56 +0000 (17:12 -0700)]
Merge tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"The end goal of the current buffer overflow detection work[0] is to
gain full compile-time and run-time coverage of all detectable buffer
overflows seen via array indexing or memcpy(), memmove(), and
memset(). The str*() family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this
series contains the foundational elements of several related buffer
overflow detection improvements by providing new common helpers and
FORTIFY_SOURCE changes needed to gain the introspection required for
compiler visibility into array sizes. Also included are a handful of
already Acked instances using the helpers (or related clean-ups), with
many more waiting at the ready to be taken via subsystem-specific
trees[2].
The new helpers are:
- struct_group() for gaining struct member range introspection
- memset_after() and memset_startat() for clearing to the end of
structures
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
structs
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage
under GCC, and to prepare to fix the currently broken Clang support.
Finishing this work is part of the larger series[0], but depends on
all the false positives and buffer overflow bug fixes to have landed
already and those that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a
compile-time and run-time tests are added for FORTIFY_SOURCE and the
mem*()-family functions respectively. The compile time tests have
found a legitimate (though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage
that result in no known object code differences.
After this series (and the changes that have now landed via netdev and
usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds.
However, due corner cases in GCC[3] and Clang[4], I have not included
the last two patches that turn on these options, as I don't want to
introduce any known warnings to the build. Hopefully these can be
solved soon"
Linus Torvalds [Tue, 2 Nov 2021 00:09:03 +0000 (17:09 -0700)]
Merge tag 'hardening-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull compiler hardening updates from Kees Cook:
"These are various compiler-related hardening feature updates. Notable
is the addition of an explicit limited rationale for, and deprecation
schedule of, gcc-plugins.
gcc-plugins:
- remove support for GCC 4.9 and older (Ard Biesheuvel)
- remove duplicate include in gcc-common.h (Ye Guojin)
- Explicitly document purpose and deprecation schedule (Kees Cook)
- Remove cyc_complexity (Kees Cook)
instrumentation:
- Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO (Kees Cook)
* tag 'hardening-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: remove duplicate include in gcc-common.h
gcc-plugins: Remove cyc_complexity
gcc-plugins: Explicitly document purpose and deprecation schedule
kallsyms: strip LTO suffixes from static functions
gcc-plugins: remove support for GCC 4.9 and older
hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO
Linus Torvalds [Tue, 2 Nov 2021 00:00:05 +0000 (17:00 -0700)]
Merge tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull thread_info update to move 'cpu' back from task_struct from Kees Cook:
"Cross-architecture update to move task_struct::cpu back into
thread_info on arm64, x86, s390, powerpc, and riscv. All Acked by arch
maintainers.
Quoting Ard Biesheuvel:
'Move task_struct::cpu back into thread_info
Keeping CPU in task_struct is problematic for architectures that
define raw_smp_processor_id() in terms of this field, as it
requires linux/sched.h to be included, which causes a lot of pain
in terms of circular dependencies (aka 'header soup')
This series moves it back into thread_info (where it came from)
for all architectures that enable THREAD_INFO_IN_TASK, addressing
the header soup issue as well as some pointless differences in the
implementations of task_cpu() and set_task_cpu()'"
* tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
riscv: rely on core code to keep thread_info::cpu updated
powerpc: smp: remove hack to obtain offset of task_struct::cpu
sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y
powerpc: add CPU field to struct thread_info
s390: add CPU field to struct thread_info
x86: add CPU field to struct thread_info
arm64: add CPU field to struct thread_info
Linus Torvalds [Mon, 1 Nov 2021 23:57:36 +0000 (16:57 -0700)]
Merge tag 'm68k-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- A small comma vs semicolon cleanup
- defconfig updates
* tag 'm68k-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v5.15-rc1
m68k: muldi3: Use semicolon instead of comma
Linus Torvalds [Mon, 1 Nov 2021 23:51:13 +0000 (16:51 -0700)]
Merge tag 'for-5.16/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Lots of new features and fixes:
- Added TOC (table of content) support, which is a debugging feature
which is either initiated by pressing the TOC button or via command
in the BMC. If pressed the Linux built-in KDB/KGDB will be called
(Sven Schnelle)
- Fix CONFIG_PREEMPT (Sven)
- Fix unwinder on 64-bit kernels (Sven)
- Various kgdb fixes (Sven)
- Added KFENCE support (me)
- Switch to ARCH_STACKWALK implementation (me)
- Fix ptrace check on syscall return (me)
- Fix kernel crash with fixmaps on PA1.x machines (me)
- Move thread_info into task struct, aka CONFIG_THREAD_INFO_IN_TASK
(me)
- Updated defconfigs
- Smaller cleanups, including Makefile cleanups (Masahiro Yamada),
use kthread_run() macro (Cai Huoqing), use swap() macro (Yihao
Han)"
* tag 'for-5.16/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (36 commits)
parisc: Fix set_fixmap() on PA1.x CPUs
parisc: Use swap() to swap values in setup_bootmem()
parisc: Update defconfigs
parisc: decompressor: clean up Makefile
parisc: decompressor: remove repeated depenency of misc.o
parisc: Remove unused constants from asm-offsets.c
parisc/ftrace: use static key to enable/disable function graph tracer
parisc/ftrace: set function trace function
parisc: Make use of the helper macro kthread_run()
parisc: mark xchg functions notrace
parisc: enhance warning regarding usage of O_NONBLOCK
parisc: Drop ifdef __KERNEL__ from non-uapi kernel headers
parisc: Use PRIV_USER and PRIV_KERNEL in ptrace.h
parisc: Use PRIV_USER in syscall.S
parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
parisc: Move thread_info into task struct
parisc: add support for TOC (transfer of control)
parisc/firmware: add functions to retrieve TOC data
parisc: add PIM TOC data structures
parisc: move virt_map macro to assembly.h
...
Jean Sacren [Sun, 31 Oct 2021 01:27:28 +0000 (19:27 -0600)]
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
In one if branch, (ec->rx_coalesce_usecs != 0) is checked. When it is
checked again in two more places, it is always false and has no effect
on the whole check expression. We should remove it in both places.
In another if branch, (ec->use_adaptive_rx_coalesce != 0) is checked.
When it is checked again, it is always false. We should remove the
entire branch with it.
In addition we might as well let C precedence dictate by getting rid of
two pairs of parentheses in the neighboring lines in order to keep
expressions on both sides of '||' in balance with checkpatch warning
silenced.
Linus Torvalds [Mon, 1 Nov 2021 23:33:53 +0000 (16:33 -0700)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's the usual summary below, but the highlights are support for
the Armv8.6 timer extensions, KASAN support for asymmetric MTE, the
ability to kexec() with the MMU enabled and a second attempt at
switching to the generic pfn_valid() implementation.
Summary:
- Support for the Arm8.6 timer extensions, including a
self-synchronising view of the system registers to elide some
expensive ISB instructions.
- Exception table cleanup and rework so that the fixup handlers
appear correctly in backtraces.
- A handful of miscellaneous changes, the main one being selection of
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.
- More mm and pgtable cleanups.
- KASAN support for "asymmetric" MTE, where tag faults are reported
synchronously for loads (via an exception) and asynchronously for
stores (via a register).
- Support for leaving the MMU enabled during kexec relocation, which
significantly speeds up the operation.
- Minor improvements to our perf PMU drivers.
- Improvements to the compat vDSO build system, particularly when
building with LLVM=1.
- Preparatory work for handling some Coresight TRBE tracing errata.
- Cleanup and refactoring of the SVE code to pave the way for SME
support in future.
- Ensure SCS pages are unpoisoned immediately prior to freeing them
when KASAN is enabled for the vmalloc area.
- Try moving to the generic pfn_valid() implementation again now that
the DMA mapping issue from last time has been resolved.
- Numerous improvements and additions to our FPSIMD and SVE
selftests"
[ armv8.6 timer updates were in a shared branch and already came in
through -tip in the timer pull - Linus ]
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
arm64: Select POSIX_CPU_TIMERS_TASK_WORK
arm64: Document boot requirements for FEAT_SME_FA64
arm64/sve: Fix warnings when SVE is disabled
arm64/sve: Add stub for sve_max_virtualisable_vl()
arm64: errata: Add detection for TRBE write to out-of-range
arm64: errata: Add workaround for TSB flush failures
arm64: errata: Add detection for TRBE overwrite in FILL mode
arm64: Add Neoverse-N2, Cortex-A710 CPU part definition
selftests: arm64: Factor out utility functions for assembly FP tests
arm64: vmlinux.lds.S: remove `.fixup` section
arm64: extable: add load_unaligned_zeropad() handler
arm64: extable: add a dedicated uaccess handler
arm64: extable: add `type` and `data` fields
arm64: extable: use `ex` for `exception_table_entry`
arm64: extable: make fixup_exception() return bool
arm64: extable: consolidate definitions
arm64: gpr-num: support W registers
arm64: factor out GPR numbering helpers
arm64: kvm: use kvm_exception_table_entry
arm64: lib: __arch_copy_to_user(): fold fixups into body
...
====================
Accurate Memory Charging For MSG_ZEROCOPY
This series improves the accuracy of msg_zerocopy memory accounting.
At present, when msg_zerocopy is used memory is charged twice for the
data - once when user space allocates it, and then again within
__zerocopy_sg_from_iter. The memory charging in the kernel is excessive
because data is held in user pages and is never actually copied to skb
fragments. This leads to incorrectly inflated memory statistics for
programs passing MSG_ZEROCOPY.
We reduce this inaccuracy by introducing the notion of "pure" zerocopy
SKBs - where all the frags in the SKB are backed by pinned userspace
pages, and none are backed by copied pages. For such SKBs, tracked via
the new SKBFL_PURE_ZEROCOPY flag, we elide sk_mem_charge/uncharge
calls, leading to more accurate accounting.
However, SKBs can also be coalesced by the stack at present,
potentially leading to "impure" SKBs. We restrict this coalescing so
it can only happen within the sendmsg() system call itself, for the
most recently allocated SKB. While this can lead to a small degree of
double-charging of memory, this case does not arise often in practice
for workloads that set MSG_ZEROCOPY.
Testing verified that memory usage in the kernel is lowered.
Instrumentation with counters also showed that accounting at time
charging and uncharging is balanced.
====================
Talal Ahmad [Sat, 30 Oct 2021 02:05:42 +0000 (22:05 -0400)]
net: avoid double accounting for pure zerocopy skbs
Track skbs with only zerocopy data and avoid charging them to kernel
memory to correctly account the memory utilization for msg_zerocopy.
All of the data in such skbs is held in user pages which are already
accounted to user. Before this change, they are charged again in
kernel in __zerocopy_sg_from_iter. The charging in kernel is
excessive because data is not being copied into skb frags. This
excessive charging can lead to kernel going into memory pressure
state which impacts all sockets in the system adversely. Mark pure
zerocopy skbs with a SKBFL_PURE_ZEROCOPY flag and remove
charge/uncharge for data in such skbs.
Initially, an skb is marked pure zerocopy when it is empty and in
zerocopy path. skb can then change from a pure zerocopy skb to mixed
data skb (zerocopy and copy data) if it is at tail of write queue and
there is room available in it and non-zerocopy data is being sent in
the next sendmsg call. At this time sk_mem_charge is done for the pure
zerocopied data and the pure zerocopy flag is unmarked. We found that
this happens very rarely on workloads that pass MSG_ZEROCOPY.
A pure zerocopy skb can later be coalesced into normal skb if they are
next to each other in queue but this patch prevents coalescing from
happening. This avoids complexity of charging when skb downgrades from
pure zerocopy to mixed. This is also rare.
In sk_wmem_free_skb, if it is a pure zerocopy skb, an sk_mem_uncharge
for SKB_TRUESIZE(MAX_TCP_HEADER) is done for sk_mem_charge in
tcp_skb_entail for an skb without data.
Testing with the msg_zerocopy.c benchmark between two hosts(100G nics)
with zerocopy showed that before this patch the 'sock' variable in
memory.stat for cgroup2 that tracks sum of sk_forward_alloc,
sk_rmem_alloc and sk_wmem_queued is around 1822720 and with this
change it is 0. This is due to no charge to sk_forward_alloc for
zerocopy data and shows memory utilization for kernel is lowered.
Signed-off-by: Talal Ahmad <talalahmad@google.com> Acked-by: Arjun Roy <arjunroy@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko [Mon, 1 Nov 2021 23:01:18 +0000 (16:01 -0700)]
selftests/bpf: Fix also no-alu32 strobemeta selftest
Previous fix aded bpf_clamp_umax() helper use to re-validate boundaries.
While that works correctly, it introduces more branches, which blows up
past 1 million instructions in no-alu32 variant of strobemeta selftests.
Switching len variable from u32 to u64 also fixes the issue and reduces
the number of validated instructions, so use that instead. Fix this
patch and bpf_clamp_umax() removed, both alu32 and no-alu32 selftests
pass.
Linus Torvalds [Mon, 1 Nov 2021 22:54:07 +0000 (15:54 -0700)]
Merge tag 'x86_sgx_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Borislav Petkov:
"Add a SGX_IOC_VEPC_REMOVE ioctl to the /dev/sgx_vepc virt interface
with which EPC pages can be put back into their uninitialized state
without having to reopen /dev/sgx_vepc, which could not be possible
anymore after startup due to security policies"
* tag 'x86_sgx_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx/virt: implement SGX_IOC_VEPC_REMOVE ioctl
x86/sgx/virt: extract sgx_vepc_remove_page
Linus Torvalds [Mon, 1 Nov 2021 22:52:26 +0000 (15:52 -0700)]
Merge tag 'x86_sev_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Export sev_es_ghcb_hv_call() so that HyperV Isolation VMs can use it
too
- Non-urgent fixes and cleanups
* tag 'x86_sev_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Expose sev_es_ghcb_hv_call() for use by HyperV
x86/sev: Allow #VC exceptions on the VC2 stack
x86/sev: Fix stack type check in vc_switch_off_ist()
x86/sme: Use #define USE_EARLY_PGTABLE_L5 in mem_encrypt_identity.c
x86/sev: Carve out HV call's return value verification
Linus Torvalds [Mon, 1 Nov 2021 22:45:14 +0000 (15:45 -0700)]
Merge tag 'x86_misc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 changes from Borislav Petkov:
- Use the proper interface for the job: get_unaligned() instead of
memcpy() in the insn decoder
- A randconfig build fix
* tag 'x86_misc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Use get_unaligned() instead of memcpy()
x86/Kconfig: Fix an unused variable error in dell-smm-hwmon
Linus Torvalds [Mon, 1 Nov 2021 22:33:54 +0000 (15:33 -0700)]
Merge tag 'x86_cpu_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Start checking a CPUID bit on AMD Zen3 which states that the CPU
clears the segment base when a null selector is written. Do the
explicit detection on older CPUs, zen2 and hygon specifically, which
have the functionality but do not advertize the CPUID bit. Factor in
the presence of a hypervisor underneath the kernel and avoid doing
the explicit check there which the HV might've decided to not
advertize for migration safety reasons, or similar.
- Add support for a new X86 CPU vendor: VORTEX. Needed for whitelisting
those CPUs in the hardware vulnerabilities detection
- Force the compiler to use rIP-relative addressing in the fallback
path of static_cpu_has(), in order to avoid unnecessary register
pressure
* tag 'x86_cpu_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Fix migration safety with X86_BUG_NULL_SEL
x86/CPU: Add support for Vortex CPUs
x86/umip: Downgrade warning messages to debug loglevel
x86/asm: Avoid adding register pressure for the init case in static_cpu_has()
x86/asm: Add _ASM_RIP() macro for x86-64 (%rip) suffix
Linus Torvalds [Mon, 1 Nov 2021 22:25:08 +0000 (15:25 -0700)]
Merge tag 'x86_cleanups_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
"The usual round of random minor fixes and cleanups all over the place"
* tag 'x86_cleanups_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Makefile: Remove unneeded whitespaces before tabs
x86/of: Kill unused early_init_dt_scan_chosen_arch()
x86: Fix misspelled Kconfig symbols
x86/Kconfig: Remove references to obsolete Kconfig symbols
x86/smp: Remove unnecessary assignment to local var freq_scale
Linus Torvalds [Mon, 1 Nov 2021 22:16:52 +0000 (15:16 -0700)]
Merge tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic confidential computing updates from Borislav Petkov:
"Add an interface called cc_platform_has() which is supposed to be used
by confidential computing solutions to query different aspects of the
system.
The intent behind it is to unify testing of such aspects instead of
having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess"
* tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide: Replace the use of mem_encrypt_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_es_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_active() with cc_platform_has()
x86/sme: Replace occurrences of sme_active() with cc_platform_has()
powerpc/pseries/svm: Add a powerpc version of cc_platform_has()
x86/sev: Add an x86 version of cc_platform_has()
arch/cc: Introduce a function to check for confidential computing features
x86/ioremap: Selectively build arch override encryption functions
Linus Torvalds [Mon, 1 Nov 2021 22:12:04 +0000 (15:12 -0700)]
Merge tag 'ras_core_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Get rid of a bunch of function pointers used in MCA land in favor of
normal functions. This is in preparation of making the MCA code
noinstr-aware
- When the kernel copies data from user addresses and it encounters a
machine check, a SIGBUS is sent to that process. Change this action
to either an -EFAULT which is returned to the user or a short write,
making the recovery action a lot more user-friendly
* tag 'ras_core_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Sort mca_config members to get rid of unnecessary padding
x86/mce: Get rid of the ->quirk_no_way_out() indirect call
x86/mce: Get rid of msr_ops
x86/mce: Get rid of machine_check_vector
x86/mce: Get rid of the mce_severity function pointer
x86/mce: Drop copyin special case for #MC
x86/mce: Change to not send SIGBUS error during copy from user
Linus Torvalds [Mon, 1 Nov 2021 22:05:48 +0000 (15:05 -0700)]
Merge tag 'efi-next-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"The last EFI pull request which is forwarded through the tip tree, for
v5.16. From now on, Ard will be sending stuff directly.
Disable EFI runtime services by default on PREEMPT_RT, while adding
the ability to re-enable them on demand by passing efi=runtime on the
command line"
* tag 'efi-next-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Allow efi=runtime
efi: Disable runtime services on RT
Linus Torvalds [Mon, 1 Nov 2021 22:02:49 +0000 (15:02 -0700)]
Merge tag 'edac_updates_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
"A small pile of EDAC updates which the autumn wind blew my way. :)
- amd64_edac: Add support for three-rank interleaving mode which is
present on AMD zen2 servers
- The usual fixes and cleanups all over EDAC land"
* tag 'edac_updates_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell
EDAC/ti: Remove redundant error messages
EDAC/amd64: Handle three rank interleaving mode
EDAC/mc_sysfs: Print MC-scope sysfs counters unsigned
EDAC/al_mc: Make use of the helper function devm_add_action_or_reset()
EDAC/mc: Replace strcpy(), sprintf() and snprintf() with strscpy() or scnprintf()
Linus Torvalds [Mon, 1 Nov 2021 21:56:37 +0000 (14:56 -0700)]
mm: fix mismerge of folio page flag manipulators
I had missed a semantic conflict between commit 3c380aa94509 ("mm: Add
folio flag manipulation functions") from the folio tree, and commit 844e999e167c ("mm: filemap: check if THP has hwpoisoned subpage for PMD
page fault") that added a new set of page flags.
My build tests had too many options enabled, which hid this issue. But
if you didn't have MEMORY_FAILURE or TRANSPARENT_HUGEPAGE enabled, you'd
end up with build errors like this:
include/linux/page-flags.h:806:29: error: macro "PAGEFLAG_FALSE" requires 2 arguments, but only 1 given
806 | PAGEFLAG_FALSE(HasHWPoisoned)
| ^
due to the missing lowercase name used for folio function naming.
Fixes: 3e28014dcc78 ("Merge tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Yang Shi <shy828301@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2/3 - Add alignment padding for map_extra, rearrange fields in
bpf_map struct to consolidate holes
3/3 - Bloom filter tests (prog_tests/bloom_filter_map):
Add test for successful userspace calls, some refactoring to
use bpf_create_map instead of bpf_create_map_xattr
v1 -> v2:
* In prog_tests/bloom_filter_map: remove unneeded line break,
also change the inner_map_test to use bpf_create_map instead
of bpf_create_map_xattr.
* Add acked-bys to commit messages
====================
Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Joanne Koong [Fri, 29 Oct 2021 22:49:09 +0000 (15:49 -0700)]
selftests/bpf: Add bloom map success test for userspace calls
This patch has two changes:
1) Adds a new function "test_success_cases" to test
successfully creating + adding + looking up a value
in a bloom filter map from the userspace side.
2) Use bpf_create_map instead of bpf_create_map_xattr in
the "test_fail_cases" and test_inner_map to make the
code look cleaner.
2) Add alignment padding to the bpf_map_info struct
More details can be found in commit b17363895b2c ("bpf: fix uapi hole
for 32 bit compat applications")
projects / kernel.git / log