Some Freescale 8250 implementations have the problem that a single long
break results in one irq per character frame time. The code in
fsl8250_handle_irq() that is supposed to handle that uses the BI bit in
lsr_saved_flags to detect such a situation and then skip the second
received character. However it also stores other error bits and so after
a single frame error the character received in the next irq handling is
passed to the upper layer with a frame error, too.
So after a spike on the data line (which is correctly recognized as a
frame error) the following valid character is thrown away, because the
driver reports a frame error for that one, too.
To weaken this problem restrict saving LSR to only the BI bit.
Note however that the handling is still broken:
- lsr_saved_flags is updated using orig_lsr which is the LSR content
for the first received char, but there might be more in the FIFO, so
a character is thrown away that is received later and not necessarily
the one following the break.
- The doubled break might be the 2nd and 3rd char in the FIFO, so the
workaround doesn't catch these, because serial8250_rx_chars() doesn't
handle the workaround.
- lsr_saved_flags might have set UART_LSR_BI at the entry of
fsl8250_handle_irq() which doesn't originate from
fsl8250_handle_irq()'s "up->lsr_saved_flags |= orig_lsr &
UART_LSR_BI;" but from e.g. from serial8250_tx_empty().
- For a long or a short break this isn't about two characters, but more
or only a single one.
The routine vfio_ccw_sch_event() is tasked with handling subchannel events,
specifically machine checks, on behalf of vfio-ccw. It correctly calls
cio_update_schib(), and if that fails (meaning the subchannel is gone)
it makes an FSM event call to mark the subchannel Not Operational.
If that worked, however, then it decides that if the FSM state was already
Not Operational (implying the subchannel just came back), then it should
simply change the FSM to partially- or fully-open.
Remove this trickery, since a subchannel returning will require more
probing than simply "oh all is well again" to ensure it works correctly.
Fixes: 14c50d87bb535 ("vfio: ccw: introduce a finite state machine") Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-4-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The wcnss_get_irq function is expected to return a value > 0 in the
event that an IRQ is succssfully obtained, but it instead returns 0.
This causes the stop and ready IRQs to never actually be used despite
being defined in the device-tree. This patch fixes that.
The DSD/PDM rate not only DSD64/128/256/512, which are the
multiple rate of 44.1kHz, but also support the multiple
rate of 8kHz, so can't force all mclk frequency to be
22579200Hz, need to assign the frequency according to
rate.
We should call of_node_put() for the reference 'dsp_of_node' returned by
of_parse_phandle() which will increase the refcount.
Fixes: 41d9a7422b1e ("ASoC: qcom: move ipq806x specific bits out of lpass driver.") Co-authored-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220702020109.263980-1-windhl@126.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Within gsm_activate_mux() all timers and locks are initiated before the
actual resource for the control channel is allocated. This can lead to race
conditions.
Allocate the control channel DLCI object first to avoid race conditions.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701122332.2039-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function may be used by the user directly and also by the n_gsm
internal functions. They can lead into a race condition which results in
interleaved frames if both are writing at the same time. The receiving side
is not able to decode those interleaved frames correctly.
Add a lock around the low side tty write to avoid race conditions and frame
interleaving between user originated writes and n_gsm writes.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-9-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the current implementation control packets are re-transmitted even if
the control channel closed down during T2. This is wrong.
Check whether the control channel is open before re-transmitting any
packets. Note that control channel open/close is handled by T1 and not T2
and remains unaffected by this.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.6 states that FCoff stops the
transmission on all channels except the control channel. This is already
implemented in gsm_data_kick(). However, chapter 5.4.8.1 explains that this
shall result in the same behavior as software flow control on the ldisc in
advanced option mode. That means only flow control frames shall be sent
during flow off. The current implementation does not consider this case.
Change gsm_data_kick() to send only flow control frames if constipated to
abide the standard. gsm_read_ea_val() and gsm_is_flow_ctrl_msg() are
introduced as helper functions for this.
It is planned to use gsm_read_ea_val() in later code cleanups for other
functions, too.
Fixes: 9fd6525027a3 ("n_gsm : Flow control handling in Mux driver") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementation does not handle the situation that no data is in
the internal queue and needs to be sent out while the user tty fifo is
full.
Add a timer that moves more data from user tty down to the internal queue
which is then serialized on the ldisc. This timer is triggered if no data
was moved from a user tty to the internal queue within 10 * T1.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1) The function drains the fifo for the given user tty/DLCI without
considering 'TX_THRESH_HI' and different to gsm_dlci_data_output_framed(),
which moves only one packet from the user side to the internal transmission
queue. We can only handle one packet at a time here if we want to allow
DLCI priority handling in gsm_dlci_data_sweep() to avoid link starvation.
2) Furthermore, the additional header octet from convergence layer type 2
is not counted against MTU. It is part of the UI/UIH frame message which
needs to be limited to MTU. Hence, it is wrong not to consider this octet.
3) Finally, the waiting user tty is not informed about freed space in its
send queue.
Take at most one packet worth of data out of the DLCI fifo to fix 1).
Limit the max user data size per packet to MTU - 1 in case of convergence
layer type 2 to leave space for the control signal octet which is added in
the later part of the function. This fixes 2).
Add tty_port_tty_wakeup() to wake up the user tty if new write space has
been made available to fix 3).
The current implementation registers/deregisters the user ttys at mux
attach/detach. That means that the user devices are available before any
control channel is open. However, user channel initialization requires an
open control channel. Furthermore, the user is not informed if the mux
restarts due to configuration changes.
Put the registration/deregistration procedure into separate function to
improve readability.
Move registration to mux activation and deregistration to mux cleanup to
keep the user devices only open as long as a control channel exists. The
user will be informed via the device driver if the mux was reconfigured in
a way that required a mux re-activation.
This makes it necessary to add T2 initialization to gsmld_open() for the
ldisc open code path (not the reconfiguration code path) to avoid deletion
of an uninitialized T2 at mux cleanup.
Fixes: bee16e52a3cf ("tty: n_gsm: expose gsmtty device nodes at ldisc open time") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After setting up the control channel on both sides the responder side may
want to open a virtual tty to listen on until the initiator starts an
application on a user channel. The current implementation allows the
open() but no other operation, like termios. These fail with EINVAL.
The responder sided application has no means to detect an open by the
initiator sided application this way. And the initiator sided applications
usually expect the responder sided application to listen on the user
channel upon open.
Set the user channel into half-open state on responder side once a user
application opens the virtual tty to allow IO operations on it.
Furthermore, keep the user channel constipated until the initiator side
opens it to give the responder sided application the chance to detect the
new connection and to avoid data loss if the responder sided application
starts sending before the user channel is open.
Fixes: 99551fa31543 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
sparse reports
sound/soc/samsung/rx1950_uda1380.c:131:18: warning: symbol 'gpiod_speaker_power' was not declared. Should it be static?
sound/soc/samsung/rx1950_uda1380.c:231:24: warning: symbol 'rx1950_audio' was not declared. Should it be static?
Both gpiod_speaker_power and rx1950_audio are only used in rx1950_uda1380.c,
so their storage class specifiers should be static.
Fixes: 873be31a6e71 ("ASoC: samsung: rx1950: turn into platform driver") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220629185345.910406-1-trix@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit da9049cf0109 ("powerpc/perf: Fix PMU callbacks to clear
pending PMI before resetting an overflown PMC") added a new
function "pmi_irq_pending" in hw_irq.h. This function is to check
if there is a PMI marked as pending in Paca (PACA_IRQ_PMI).This is
used in power_pmu_disable in a WARN_ON. The intention here is to
provide a warning if there is PMI pending, but no counter is found
overflown.
During some of the perf runs, below warning is hit:
This means that there is no PMC overflown among the active events
in the PMU, but there is a PMU pending in Paca. The function
"any_pmc_overflown" checks the PMCs on active events in
cpuhw->n_events. Code snippet:
<<>>
if (any_pmc_overflown(cpuhw))
clear_pmi_irq_pending();
else
WARN_ON(pmi_irq_pending());
<<>>
Here the PMC overflown is not from active event. Example: When we do
perf record, default cycles and instructions will be running on PMC6
and PMC5 respectively. It could happen that overflowed event is currently
not active and pending PMI is for the inactive event. Debug logs from
trace_printk:
<<>>
any_pmc_overflown: idx is 5: pmc value is 0xd9a
power_pmu_disable: PMC1: 0x0, PMC2: 0x0, PMC3: 0x0, PMC4: 0x0, PMC5: 0xd9a, PMC6: 0x80002011
<<>>
Here active PMC (from idx) is PMC5 , but overflown PMC is PMC6(0x80002011).
When we handle PMI interrupt for such cases, if the PMC overflown is
from inactive event, it will be ignored. Reference commit:
commit 9651d67001ac ("powerpc/perf: Fix finding overflowed PMC in interrupt")
Patch addresses two changes:
1) Fix 1 : Removal of warning ( WARN_ON(pmi_irq_pending()); )
We were printing warning if no PMC is found overflown among active PMU
events, but PMI pending in PACA. But this could happen in cases where
PMC overflown is not in active PMC. An inactive event could have caused
the overflow. Hence the warning is not needed. To know pending PMI is
from an inactive event, we need to loop through all PMC's which will
cause more SPR reads via mfspr and increase in context switch. Also in
existing function: perf_event_interrupt, already we ignore PMI's
overflown when it is from an inactive PMC.
2) Fix 2: optimization in clearing pending PMI.
Currently we check for any active PMC overflown before clearing PMI
pending in Paca. This is causing additional SPR read also. From point 1,
we know that if PMI pending in Paca from inactive cases, that is going
to be ignored during replay. Hence if there is pending PMI in Paca, just
clear it irrespective of PMC overflown or not.
In summary, remove the any_pmc_overflown check entirely in
power_pmu_disable. ie If there is a pending PMI in Paca, clear it, since
we are in pmu_disable. There could be cases where PMI is pending because
of inactive PMC ( which later when replayed also will get ignored ), so
WARN_ON could give false warning. Hence removing it.
Fixes: da9049cf0109 ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220522142256.24699-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
This function has two paths missing of_node_put().
b00577cd7b2f ("profiling: fix shift-out-of-bounds bugs") limits shift
value by [0, BITS_PER_LONG -1], which means [0, 63].
However, syzbot found that the max shift value should be the bit number of
(_etext - _stext). If shift is outside of this, the "buffer_bytes" will
be zero and will cause kzalloc(0). Then the kernel panics due to
dereferencing the returned pointer 16.
This can be easily reproduced by passing a large number like 60 to enable
profiling and then run readprofile.
The test_klp_callbacks_busy module conditionally blocks a future
livepatch transition by busy waiting inside its workqueue function,
busymod_work_func(). After scheduling this work, a test livepatch is
loaded, introducing the transition under test.
Both events are marked in the kernel log for later verification, but
there is no synchronization to ensure that busymod_work_func() logs its
function entry message before subsequent selftest commands log their own
messages. This can lead to a rare test failure due to unexpected
ordering like:
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak.
Fixes: 0cb61aa80327 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20220605083334.23942-1-linmq006@gmail.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
During execution of the worker that's used to register rpmsg devices
we are safely locking the channels mutex but, when creating a new
endpoint for such devices, we are registering a IPI on the SCP, which
then makes the SCP to trigger an interrupt, lock its own mutex and in
turn register more subdevices.
This creates a circular locking dependency situation, as the mtk_rpmsg
channels_lock will then depend on the SCP IPI lock.
[ 15.447736] ======================================================
[ 15.460158] WARNING: possible circular locking dependency detected
[ 15.460161] 5.17.0-next-20220324+ #399 Not tainted
[ 15.460165] ------------------------------------------------------
[ 15.460166] kworker/0:3/155 is trying to acquire lock:
[ 15.460170] ffff5b4d0eaf1308 (&scp->ipi_desc[i].lock){+.+.}-{4:4}, at: scp_ipi_lock+0x34/0x50 [mtk_scp_ipi]
[ 15.504958]
[] but task is already holding lock:
[ 15.504960] ffff5b4d0e8f1918 (&mtk_subdev->channels_lock){+.+.}-{4:4}, at: mtk_register_device_work_function+0x50/0x1cc [mtk_rpmsg]
[ 15.504978]
[] which lock already depends on the new lock.
To solve this, simply unlock the channels_lock mutex before calling
mtk_rpmsg_register_device() and relock it right after, as safety is
still ensured by the locking mechanism that happens right after
through SCP.
There is no mutex protection for rpmsg_eptdev_open(),
especially for eptdev->ept read and write operation.
It may cause issues when multiple instances call
rpmsg_eptdev_open() in parallel,the return state
may be success or EBUSY.
Make sure LSR flags are preserved in dw8250_tx_wait_empty(). This
function is called from a low-level out function and therefore cannot
call serial_lsr_in() as it would lead to infinite recursion.
It is borderline if the flags need to be saved here at all since this
code relates to writing LCR register which usually implies no important
characters should be arriving.
Fixes: 76fea4d3f8bc ("serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220608095431.18376-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
One situation where this could be used is when configuring the UART
controller to be the DMA flow controller. This is a typical case where
the driver might need to program a few more registers before starting a
DMA transfer. Provide the necessary infrastructure to support this
case.
Make ICR access helpers available outside 8250_port.c, however retain
them as ordinary static functions so as not to regress code generation.
This is because `serial_icr_write' is currently automatically inlined by
GCC, however `serial_icr_read' is not. Making them both static inline
would grow code produced, e.g.:
$ i386-linux-gnu-size --format=gnu 8250_port-{old,new}.o
text data bss total filename
15065 3378 0 18443 8250_port-old.o
15289 3378 0 18667 8250_port-new.o
and:
$ riscv64-linux-gnu-size --format=gnu 8250_port-{old,new}.o
text data bss total filename
16980 5306 0 22286 8250_port-old.o
17124 5306 0 22430 8250_port-new.o
while making them external would needlessly add a new module interface
and lose the benefit from `serial_icr_write' getting inlined outside
8250_port.o.
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Fix refcount leak in some error paths.
Fixes: 9c3f6c50c65c ("ASoC: mediatek: Add machine driver for ALC5650 codec") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603124243.31358-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As i2c_add_driver could return error if fails, it should be
better to check the return value.
However, if the CONFIG_I2C and CONFIG_SPI_MASTER are both true,
the return value of i2c_add_driver will be covered by
spi_register_driver.
Therefore, it is necessary to add check and return error if fails.
Fixes: 9e6179430bfd ("ASoC: da7210: Add support for spi regmap") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220531094712.2376759-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 2b819d97c5a7 ("ASoC: add mt6797-mt6351 driver and config option") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603083417.9011-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Fix missing of_node_put() in error paths.
Fixes: 5f86aa2ef9aa ("ASoC: mediatek: Use platform_of_node for machine drivers") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220602034144.60159-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
This function is missing of_node_put(cpu) in the error path.
Fix this by goto out label. of_node_put() will check NULL pointer.
Fixes: d9d14cadd509 ("ASoC: samsung: Add driver for Aries boards") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220603130640.37624-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: f9484618e3f1 ("ASoC: cros_ec_codec: support WoV") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20220603131043.38907-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
dev_pm_domain_attach_by_name() may return NULL in some cases,
so IS_ERR() doesn't meet the requirements. Thus fix it.
Fixes: 2d395697182c ("opp: Attach genpds to devices from within OPP core") Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
[ Viresh: Replace ENODATA with ENODEV ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/usb/cdns3/cdns3-gadget.c:2290:11: error: variable 'priv_dev' is uninitialized when used here [-Werror,-Wuninitialized]
dev_dbg(priv_dev->dev, "usbss: invalid parameters\n");
^~~~~~~~
include/linux/dev_printk.h:155:18: note: expanded from macro 'dev_dbg'
dynamic_dev_dbg(dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~
include/linux/dynamic_debug.h:167:7: note: expanded from macro 'dynamic_dev_dbg'
dev, fmt, ##__VA_ARGS__)
^~~
include/linux/dynamic_debug.h:152:56: note: expanded from macro '_dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~
include/linux/dynamic_debug.h:134:15: note: expanded from macro '__dynamic_func_call'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
drivers/usb/cdns3/cdns3-gadget.c:2278:31: note: initialize the variable 'priv_dev' to silence this warning
struct cdns3_device *priv_dev;
^
= NULL
1 error generated.
The priv_dev assignment was moved below the if statement to avoid
potentially dereferencing ep before it was checked but priv_dev is used
in the dev_dbg() call.
To fix this, move the priv_dev and comp_desc assignments back to their
original spot and hoist the ep check above those assignments with a call
to pr_debug() instead of dev_dbg().
Fixes: 6ba7eb0fda92 ("usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()") Link: https://github.com/ClangBuiltLinux/linux/issues/1680 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
while (commit_transaction->t_buffers)
if (is_journal_aborted)
jbd2_journal_refile_buffer
__jbd2_journal_refile_buffer
WRITE_ONCE(jh->b_transaction,
jh->b_next_transaction)
WRITE_ONCE(jh->b_next_transaction, NULL)
__jbd2_journal_file_buffer(jh, BJ_Reserved)
J_ASSERT_JH(jh, jh->b_frozen_data == NULL) // assertion failure !
The reproducer (See detail in [Link]) reports:
------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:1629!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 584 Comm: unlink Tainted: G W 5.19.0-rc6-00115-g4a57a8400075-dirty #697
RIP: 0010:jbd2_journal_dirty_metadata+0x3c5/0x470
RSP: 0018:ffffc90000be7ce0 EFLAGS: 00010202
Call Trace:
<TASK>
__ext4_handle_dirty_metadata+0xa0/0x290
ext4_handle_dirty_dirblock+0x10c/0x1d0
ext4_delete_entry+0x104/0x200
__ext4_unlink+0x22b/0x360
ext4_unlink+0x275/0x390
vfs_unlink+0x20b/0x4c0
do_unlinkat+0x42f/0x4c0
__x64_sys_unlink+0x37/0x50
do_syscall_64+0x35/0x80
After journal aborting, __jbd2_journal_refile_buffer() is executed with
holding @jh->b_state_lock, we can fix it by moving 'is_handle_aborted()'
into the area protected by @jh->b_state_lock.
When migrating to extents, the checksum seed of temporary inode
need to be replaced by inode's, otherwise the inode checksums
will be incorrect when swapping the inodes data.
However, the temporary inode can not match it's checksum to
itself since it has lost it's own checksum seed.
========
...
Pass 1: Checking inodes, blocks, and sizes
Inode 13 passes checks, but checksum does not match inode. Fix? no
...
========
The fix is simple, save the checksum seed of temporary inode, and
recover it after migrating to extents.
Fixes: 66a4d8deef8a ("ext4: set csum seed in tmp inode while migrating to extents") Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220617062515.2113438-1-lilingfeng3@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
We catch an assert problem in jbd2_journal_commit_transaction() when
doing fsstress and request falut injection tests. The problem is
happened in a race condition between jbd2_journal_commit_transaction()
and ext4_end_io_end(). Firstly, ext4_writepages() writeback dirty pages
and start reserved handle, and then the journal was aborted due to some
previous metadata IO error, jbd2_journal_abort() start to commit current
running transaction, the committing procedure could be raced by
ext4_end_io_end() and lead to subtract j_reserved_credits twice from
commit_transaction->t_outstanding_credits, finally the
t_outstanding_credits is mistakenly smaller than t_nr_buffers and
trigger assert.
kjournald2 kworker
jbd2_journal_commit_transaction()
write_unlock(&journal->j_state_lock);
atomic_sub(j_reserved_credits, t_outstanding_credits); //sub once
Fix this issue by using journal->j_state_lock to protect the subtraction
in jbd2_journal_commit_transaction().
Fixes: 2a629849c6e3 ("jbd2: avoid long hold times of j_state_lock while committing a transaction") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220611130426.2013258-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are cases where a bio may not accept additional pages, and the iov
needs to advance to the last data length that was accepted. The zone
append used to handle this correctly, but was inadvertently broken when
the setup was made common with the normal r/w case.
Fixes: 956b6e8353966 ("block: use bio_add_page in bio_iov_iter_get_pages") Fixes: 6f5a0eb93d937 ("block/bio: remove duplicate append pages code") Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20220712153256.2202024-1-kbusch@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
nvme_revalidate_zones can also return -ENODEV if e.g. zone sizes aren't
constant or not a power of two. In that case we should jump to marking
the gendisk hidden and only support pass through.
Fixes: a36d1712dd90 ("nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info") Reported-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Joel Granados <j.granados@samsung.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a fabrics controller claims to support an invalidate metadata
configuration we already warn and disable metadata support. No need to
also return an error during revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Tested-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The only fabrics target that supports metadata handling through the
separate integrity buffer is RDMA. It is currently usable only if the
size is 8B per block and formatted for protection information. If an
rdma target were to export a namespace with a different format (ex:
4k+64B), the driver will not be able to submit valid read/write commands
for that namespace.
Suppress setting the metadata feature in the namespace so that the
gendisk capacity will be set to 0. This will prevent read/write access
through the block stack, but will continue to allow ioctl passthrough
commands.
Cc: Max Gurtovoy <mgurtovoy@nvidia.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit b518fe63526b ("nvme: simplify the compat ioctl handling") removed
the initialization of compat_ioctl from the nvme block_device_operations
structures.
Presumably the expectation was that 32-bit ioctls would be directed
through the regular handler but this is not the case: failing to assign
.compat_ioctl actually means that the compat case is disabled entirely,
and any attempt to submit nvme ioctls from 32-bit userspace fails
outright with -ENOTTY.
Use command_id instead of req->tag in trace_nvme_complete_rq(),
because of commit fc23af1887d6 ("nvme: code command_id with a genctr
for use authentication after release"), cmd->common.command_id is set to
((genctl & 0xf)< 12 | req->tag), no longer req->tag, which makes cid in
trace_nvme_complete_rq and trace_nvme_setup_cmd are not the same.
Fixes: fc23af1887d6 ("nvme: code command_id with a genctr for use authentication after release") Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the function rxe_create_qp(), rxe_qp_from_init() is called to
initialize qp, internally things like the spin locks are not setup until
rxe_qp_init_req().
If an error occures before this point then the unwind will call
rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task()
which will oops when trying to access the uninitialized spinlock.
Move the spinlock initializations earlier before any failures.
The is_user members of struct rxe_sq/rxe_rq/rxe_srq are unsed since
commit 76f0c32b4fc2 ("RDMA/rxe: Add memory barriers to kernel queues").
In this case, it is fine to remove them directly.
Earlier patches added memory barriers to protect user space to kernel
space communications. The user space queues were previously shown to have
occasional memory synchonization errors which were removed by adding
smp_load_acquire, smp_store_release barriers. This patch extends that to
the case where queues are used between kernel space threads.
This patch also extends the queue types to include kernel ULP queues which
access the other end of the queues in kernel verbs calls like poll_cq and
post_send/recv.
The commit 087b5dff2634 (“of: properly check for error returned
by fdt_get_name()”) changed the return value type from bool to int,
but forgot to change the return value simultaneously.
populate_node was only called in unflatten_dt_nodes, and returns
with values greater than or equal to 0 were discarded without further
processing. Considering that return 0 usually indicates success,
return 0 instead of return true.
Fixes: 087b5dff2634 (“of: properly check for error returned by fdt_get_name()”) Signed-off-by: Xu Qiang <xuqiang36@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220801120506.11461-2-xuqiang36@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the beginning, charged is set to 0 to avoid calling vm_unacct_memory
twice because vm_unacct_memory will be called by above unmap_region. But
since commit 1fd9cdf0f893 ("vm: remove 'nr_accounted' calculations from
the unmap_vmas() interfaces"), unmap_region doesn't call vm_unacct_memory
anymore. So charged shouldn't be set to 0 now otherwise the calling to
paired vm_unacct_memory will be missed and leads to imbalanced account.
Link: https://lkml.kernel.org/r/20220618082027.43391-1-linmiaohe@huawei.com Fixes: 1fd9cdf0f893 ("vm: remove 'nr_accounted' calculations from the unmap_vmas() interfaces") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not record a pointer to a VMA outside of the mmap_lock for later use.
This is unsafe and there are a number of failure paths *after* the
recorded VMA pointer may be freed during setup. There is no callback to
the driver to clear the saved pointer from generic mm code. Furthermore,
the VMA pointer may become stale if any number of VMA operations end up
freeing the VMA so saving it was fragile to being with.
Instead, change the binder_alloc struct to record the start address of the
VMA and use vma_lookup() to get the vma when needed. Add lockdep
mmap_lock checks on updates to the vma pointer to ensure the lock is held
and depend on that lock for synchronization of readers and writers - which
was already the case anyways, so the smp_wmb()/smp_rmb() was not
necessary.
[akpm@linux-foundation.org: fix drivers/android/binder_alloc_selftest.c] Link: https://lkml.kernel.org/r/20220621140212.vpkio64idahetbyf@revolver Fixes: 35f791a283b5 ("android: binder: fix the race mmap and alloc_new_buf_locked") Reported-by: syzbot+58b51ac2b04e388ab7b0@syzkaller.appspotmail.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Christian Brauner (Microsoft) <brauner@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Martijn Coenen <maco@android.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Todd Kjos <tkjos@android.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the LIO port members inside struct srpt_port from regular members
into pointers. Allocate the LIO port data structures from inside
srpt_make_tport() and free these from inside srpt_make_tport(). Keep
struct srpt_device as long as either an RDMA port or a LIO target port is
associated with it. This patch decouples the lifetime of struct srpt_port
(controlled by the RDMA core) and struct srpt_port_id (controlled by LIO).
This patch fixes the following KASAN complaint:
BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt]
Read of size 8 at addr ffff888141cc34b8 by task check/5093
This will be used to keep struct srpt_device around as long as either the
RDMA port exists or a LIO target port is associated with the struct
srpt_device.
will succeed if at least one byte is written to the "cmdbuf" buffer.
The "*ppos" value controls which byte is written. Another problem is
that this code does not check for errors so it's possible for the entire
buffer to be uninitialized.
Inintialize the struct to zero to prevent reading uninitialized stack
data.
Debugfs is normally only writable by root so the impact of this bug is
very minimal.
Fixes: a3fdc9110d10 ("Platform: OLPC: move debugfs support from x86 EC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make UMIP an "allowed-1" bit CR4_FIXED1 MSR when KVM is emulating UMIP.
KVM emulates UMIP for both L1 and L2, and so should enumerate that L2 is
allowed to have CR4.UMIP=1. Not setting the bit doesn't immediately
break nVMX, as KVM does set/clear the bit in CR4_FIXED1 in response to a
guest CPUID update, i.e. KVM will correctly (dis)allow nested VM-Entry
based on whether or not UMIP is exposed to L1. That said, KVM should
enumerate the bit as being allowed from time zero, e.g. userspace will
see the wrong value if the MSR is read before CPUID is written.
Fixes: f9d109515d81 ("KVM: vmx: add support for emulating UMIP") Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-12-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For erase operations, reg_proto must be used as indicated in
struct spi_nor description in spi-nor.h.
This issue was found when DT property spi-tx-bus-width is set to 4.
In this case the spi_mem_op->addr.buswidth is set to 4 for erase command
which is not correct.
Tested on stm32mp157c-ev1 board with mx66l51235f spi-nor.
Fixes: 5dcbd803d93e ("mtd: spi-nor: add support for DTR protocol") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
[ta: use nor->reg_proto in spi_nor_controller_ops_erase()] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220629133013.3382393-1-patrice.chotard@foss.st.com Signed-off-by: Sasha Levin <sashal@kernel.org>
As part of Root Port interrupt handling, level-0 register is read first and
based on the bits set in that, corresponding level-1 registers are read for
further interrupt processing. Since both these values are currently read
into the same 'val' variable, checking level-0 bits the second time around
is happening on the 'val' variable value of level-1 register contents
instead of freshly reading the level-0 value again.
Fix by using different variables to store level-0 and level-1 registers
contents.
The 'rkey' input can be an lkey or rkey, and in rxe the lkey or rkey have
the same value, including the variant bits.
So, if mr->rkey is set, compare the invalidate key with it, otherwise
compare with the mr->lkey.
Since we already did a lookup on the non-varient bits to get this far, the
check's only purpose is to confirm that the wqe has the correct variant
bits.
Fixes: a6815f7b3d97 ("RDMA/rxe: Separate HW and SW l/rkeys") Link: https://lore.kernel.org/r/20220707073006.328737-1-haris.phnx@gmail.com Signed-off-by: Md Haris Iqbal <haris.phnx@gmail.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In thunder_mmc_probe(), we should call of_node_put() when breaking
out of for_each_child_of_node() which has increased and decreased
the refcount during each iteration.
Fixes: ffbd99ed5651 ("mmc: cavium: Add MMC PCI driver for ThunderX SOCs") Signed-off-by: Liang He <windhl@126.com> Acked-by: Robert Richter <rric@kernel.org> Link: https://lore.kernel.org/r/20220719095216.1241601-2-windhl@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In octeon_mmc_probe(), we should call of_node_put() when breaking
out of for_each_child_of_node() which has increased and decreased
the refcount during each iteration.
Fixes: 042581375f8a ("mmc: cavium: Add MMC support for Octeon SOCs.") Signed-off-by: Liang He <windhl@126.com> Acked-by: Robert Richter <rric@kernel.org> Link: https://lore.kernel.org/r/20220719095216.1241601-1-windhl@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementation of rxe_check_bind_mw() in rxe_mw.c is incorrect
since it requires the new key portion provided by the mw consumer to be
different than the previous key portion. This is not required by the
IBA. Remove the test.
The type atomic_long_t can have size 4 or 8 bytes, depending on
CONFIG_64BIT; it's only content, the field 'counter', is either an
int or a s64 value.
Current code incorrectly uses the fixed size utils.read_u64() to
read the field 'counter' inside atomic_long_t.
On 32 bits architectures reading the last element 'tail_id' of the
struct prb_desc_ring:
struct prb_desc_ring {
...
atomic_long_t tail_id;
};
causes the utils.read_u64() to access outside the boundary of the
struct and the gdb command 'lx-dmesg' exits with error:
Python Exception <class 'IndexError'>: index out of range
Error occurred in Python: index out of range
Query the really used atomic_long_t counter type size.
For the gdb command lx-dmesg, the entire descriptor, info, and text
data regions are read into memory before printing any records. For
large kernel log buffers, this not only causes a huge delay before
seeing any records, but it may also lead to python errors of too
much memory allocation.
Rather than reading in all these regions in advance, read them as
needed and only read the regions for the particular record that is
being printed.
The gdb macro "dmesg" in Documentation/admin-guide/kdump/gdbmacros.txt
already prints out the kernel log buffer like this.
Smatch Warning:
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy()
'&mcp->txbuf[5]' too small (59 vs 255)
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() 'buf'
too small (34 vs 255)
The 'len' variable can take a value between 0-255 as it can come from
data->block[0] and it is user data. So add an bound check to prevent a
buffer overflow in memcpy().
We should use of_node_get() when a new reference of device_node
is created. It is noted that the old reference stored in
'mm_gc->gc.of_node' should also be decreased.
This patch is based on the fact that there is a call site in function
'qe_add_gpiochips()' of src file 'drivers\soc\fsl\qe\gpio.c'. In this
function, of_mm_gpiochip_add_data() is contained in an iteration of
for_each_compatible_node() which will automatically increase and
decrease the refcount. So we need additional of_node_get() for the
reference escape in of_mm_gpiochip_add_data().
Fixes: bfc6548d945f ("of/gpio: Kill of_gpio_chip and add members directly to gpio_chip") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org>
setup_base_ctxt() allocates a memory chunk for uctxt->groups with
hfi1_alloc_ctxt_rcv_groups(). When init_user_ctxt() fails, uctxt->groups
is not released, which will lead to a memory leak.
We should release the uctxt->groups with hfi1_free_ctxt_rcv_groups()
when init_user_ctxt() fails.
Fixes: e689e148b11d ("IB/hfi1: Only set fd pointer when base context is completely initialized") Link: https://lore.kernel.org/r/20220711070718.2318320-1-niejianglei2021@163.com Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of registering callback to process sensor events right at
initialization time, wait for the sensor to be register in the iio
subsystem.
Events can come at probe time (in case the kernel rebooted abruptly
without switching the sensor off for instance), and be sent to IIO core
before the sensor is fully registered.
Fixes: c17c81e4fdd4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO") Reported-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220711144716.642617-1-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't
been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY
in this case. This may trigger a call trace in iw_cm. A simple way to
trigger this:
server: ib_send_lat
client: ib_send_lat -R <server_ip>
The driver will clear all the interrupts in the same area
when the driver handles the interrupt of type AEQ overflow.
It should only set the interrupt status bit of type AEQ overflow.
Fixes: c55e5c868a98 ("RDMA/hns: Add eq support of hip08") Link: https://lore.kernel.org/r/20220714134353.16700-4-liangwenpeng@huawei.com Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
__qedr_alloc_mr() allocates a memory chunk for "mr->info.pbl_table" with
init_mr_info(). When rdma_alloc_tid() and rdma_register_tid() fail, "mr"
is released while "mr->info.pbl_table" is not released, which will lead
to a memory leak.
We should release the "mr->info.pbl_table" with qedr_free_pbl() when error
occurs to fix the memory leak.
Fixes: 00cf968c16fe ("qedr: Add support for memory registeration verbs") Link: https://lore.kernel.org/r/20220714061505.2342759-1-niejianglei2021@163.com Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
removes list_next_or_null_rr_rcu macro to fix below warnings.
That macro is used only twice.
CHECK:MACRO_ARG_REUSE: Macro argument reuse 'head' - possible side-effects?
CHECK:MACRO_ARG_REUSE: Macro argument reuse 'ptr' - possible side-effects?
CHECK:MACRO_ARG_REUSE: Macro argument reuse 'memb' - possible side-effects?
Replaces that macro with an inline function.
Fixes: af01783ea5ce ("RDMA/rtrs: client: main functionality") Cc: jinpu.wang@ionos.com Link: https://lore.kernel.org/r/20220712103113.617754-5-haris.iqbal@ionos.com Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
rtrs_clt_sess is used for paths and not sessions on the client side. This
creates confusion so let's rename it to rtrs_clt_path. Also, rename
related variables and functions.
Coccinelle is used to do the transformations for most of the occurrences
and remaining ones were handled manually.
Link: https://lore.kernel.org/r/20220105180708.7774-4-jinpu.wang@ionos.com Signed-off-by: Vaishali Thakkar <vaishali.thakkar@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
rtrs_srv_sess is used for paths and not sessions on the server side. This
creates confusion so let's rename it to rtrs_srv_path. Also, rename
related variables and functions.
Coccinelle is used to do the transformations for most of the occurrences
and remaining ones were handled manually.
Link: https://lore.kernel.org/r/20220105180708.7774-3-jinpu.wang@ionos.com Signed-off-by: Vaishali Thakkar <vaishali.thakkar@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Allowing these characters in sessname can lead to unexpected results,
particularly because / is used as a separator between files in a path, and
. points to the current directory.
Link: https://lore.kernel.org/r/20210922125333.351454-7-haris.iqbal@ionos.com Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com> Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The problem is in case of poll queue, we need to still call
ib_alloc_cq/ib_free_cq, we can't use cq_poll api for poll queue.
As both client and server use shared function from rtrs, set irq_con_num
to con_num on server side, which is number of total connection of the
session, this way we can differ if the rtrs_con requires pollqueue.
Following up patches will replace the duplicate code with helpers.
Link: https://lore.kernel.org/r/20210922125333.351454-4-haris.iqbal@ionos.com Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Setting err_rq_idx_valid field in QP context when the AE source of the
AEQE is not associated with an RQ causes the firmware flush to fail.
Set err_rq_idx_valid field in QP context only if it is associated with an
RQ. Additionally, cleanup the redundant setting of this field in
irdma_process_aeq.
When an application listens on a wildcard address, and there are VLAN and
non-VLAN IP addresses, iWARP connection establishemnt can fail if the listen
node VLAN ID does not match.
Fix this by checking the vlan_id only if not a wildcard listen node.
During a destroy CQ an interrupt may cause processing of a CQE after CQ
resources are freed by irdma_cq_free_rsrc(). Fix this by moving the call
to irdma_cq_free_rsrc() after the irdma_sc_cleanup_ceqes(), which is
called under the cq_lock.
max_node_id not equal to the ARRAY_SIZE of node array, need increase 1,
otherwise xlate will fail for the last entry. And rename max_node_id
to num_nodes to reflect the reality.
Error code is overridden, in case the PLL doesn't lock. So, the USB
initialization can continue. This leads to a platform freeze.
This can be avoided by returning proper error code to avoid USB probe
freezing the platform. It also displays proper errors in log.
projects / kernel.git / log