Kaiwen Hu [Wed, 23 Mar 2022 07:10:32 +0000 (15:10 +0800)]
btrfs: prevent subvol with swapfile from being deleted
A subvolume with an active swapfile must not be deleted otherwise it
would not be possible to deactivate it.
After the subvolume is deleted, we cannot swapoff the swapfile in this
deleted subvolume because the path is unreachable. The swapfile is
still active and holding references, the filesystem cannot be unmounted.
btrfs sub delete $mnt/subvol
swapoff $mnt/subvol/swapfile # failed: No such file or directory
swapoff --all
unmount $mnt # target is busy.
To prevent above issue, we simply check that whether the subvolume
contains any active swapfile, and stop the deleting process. This
behavior is like snapshot ioctl dealing with a swapfile.
CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Robbie Ko <robbieko@synology.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Kaiwen Hu <kevinhu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 23 Mar 2022 15:30:36 +0000 (11:30 -0400)]
btrfs: do not warn for free space inode in cow_file_range
This is a long time leftover from when I originally added the free space
inode, the point was to catch cases where we weren't honoring the NOCOW
flag. However there exists a race with relocation, if we allocate our
free space inode in a block group that is about to be relocated, we
could trigger the COW path before the relocation has the opportunity to
find the extents and delete the free space cache. In production where
we have auto-relocation enabled we're seeing this WARN_ON_ONCE() around
5k times in a 2 week period, so not super common but enough that it's at
the top of our metrics.
We're properly handling the error here, and with us phasing out v1 space
cache anyway just drop the WARN_ON_ONCE.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
[CAUSE]
In defrag_collect_targets(), we check if the current range (A) can be merged
with next one (B).
If mergeable, we will add range A into target for defrag.
However there is a catch for autodefrag, when checking mergeability
against range B, we intentionally pass 0 as @newer_than, hoping to get a
higher chance to merge with the next extent.
But in the next iteration, range B will looked up by defrag_lookup_extent(),
with non-zero @newer_than.
And if range B is not really newer, it will rejected directly, causing
only range A being defragged, while we expect to defrag both range A and
B.
[FIX]
Since the root cause is the difference in check condition of
defrag_check_next_extent() and defrag_collect_targets(), we fix it by:
1. Pass @newer_than to defrag_check_next_extent()
2. Pass @extent_thresh to defrag_check_next_extent()
This makes the check between defrag_collect_targets() and
defrag_check_next_extent() more consistent.
While there is still some minor difference, the remaining checks are
focus on runtime flags like writeback/delalloc, which are mostly
transient and safe to be checked only in defrag_collect_targets().
Darrick J. Wong [Mon, 14 Mar 2022 17:55:32 +0000 (10:55 -0700)]
btrfs: fix fallocate to use file_modified to update permissions consistently
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero range). Because the call can be used to change file contents, we
should treat it like we do any other modification to a file -- update
the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 8 Mar 2022 05:36:38 +0000 (13:36 +0800)]
btrfs: remove device item and update super block in the same transaction
[BUG]
There is a report that a btrfs has a bad super block num devices.
This makes btrfs to reject the fs completely.
BTRFS error (device sdd3): super_num_devices 3 mismatch with num_devices 2 found here
BTRFS error (device sdd3): failed to read chunk tree: -22
BTRFS error (device sdd3): open_ctree failed
[CAUSE]
During btrfs device removal, chunk tree and super block num devs are
updated in two different transactions:
btrfs_rm_device()
|- btrfs_rm_dev_item(device)
| |- trans = btrfs_start_transaction()
| | Now we got transaction X
| |
| |- btrfs_del_item()
| | Now device item is removed from chunk tree
| |
| |- btrfs_commit_transaction()
| Transaction X got committed, super num devs untouched,
| but device item removed from chunk tree.
| (AKA, super num devs is already incorrect)
|
|- cur_devices->num_devices--;
|- cur_devices->total_devices--;
|- btrfs_set_super_num_devices()
All those operations are not in transaction X, thus it will
only be written back to disk in next transaction.
So after the transaction X in btrfs_rm_dev_item() committed, but before
transaction X+1 (which can be minutes away), a power loss happen, then
we got the super num mismatch.
[FIX]
Instead of starting and committing a transaction inside
btrfs_rm_dev_item(), start a transaction in side btrfs_rm_device() and
pass it to btrfs_rm_dev_item().
And only commit the transaction after everything is done.
Ethan Lien [Mon, 7 Mar 2022 10:00:04 +0000 (18:00 +0800)]
btrfs: fix qgroup reserve overflow the qgroup limit
We use extent_changeset->bytes_changed in qgroup_reserve_data() to record
how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the
bytes_changed is set as "unsigned int", and it will overflow if we try to
fallocate a range larger than 4GiB. The result is we reserve less bytes
and eventually break the qgroup limit.
Unlike regular buffered/direct write, which we use one changeset for
each ordered extent, which can never be larger than 256M. For
fallocate, we use one changeset for the whole range, thus it no longer
respects the 256M per extent limit, and caused the problem.
The following example test script reproduces the problem:
$ cat qgroup-overflow.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Set qgroup limit to 2GiB.
btrfs quota enable $MNT
btrfs qgroup limit 2G $MNT
# Try to fallocate a 3GiB file. This should fail.
echo
echo "Try to fallocate a 3GiB file..."
fallocate -l 3G $MNT/3G.file
# Try to fallocate a 5GiB file.
echo
echo "Try to fallocate a 5GiB file..."
fallocate -l 5G $MNT/5G.file
# See we break the qgroup limit.
echo
sync
btrfs qgroup show -r $MNT
umount $MNT
When running the test:
$ ./qgroup-overflow.sh
(...)
Try to fallocate a 3GiB file...
fallocate: fallocate failed: Disk quota exceeded
btrfs: zoned: remove left over ASSERT checking for single profile
With commit dcf5652291f6 ("btrfs: zoned: allow DUP on meta-data block
groups") we started allowing DUP on metadata block groups, so the
ASSERT()s in btrfs_can_activate_zone() and btrfs_zoned_get_device() are
no longer valid and in fact even harmful.
Fixes: dcf5652291f6 ("btrfs: zoned: allow DUP on meta-data block groups") CC: stable@vger.kernel.org # 5.17 Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using the RCU on fs_devices->device_list we
can use fs_devices->alloc_list, protected by the chunk_mutex to traverse
the list of active devices.
We are in the chunk allocation thread. The newer chunk allocation
happens from the devices in the fs_device->alloc_list protected by the
chunk_mutex.
Also, a device that reappears after the mount won't join the alloc_list
yet and, it will be in the dev_list, which we don't want to consider in
the context of the chunk alloc.
Fixes: a85f05e59bc1 ("btrfs: zoned: avoid chunk allocation if active block group has enough space") CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 7 Mar 2022 13:30:02 +0000 (15:30 +0200)]
btrfs: zoned: put block group after final usage
It's counter-intuitive (and wrong) to put the block group _before_ the
final usage in submit_eb_page. Fix it by re-ordering the call to
btrfs_put_block_group after its final reference. Also fix a minor typo
in 'implies'
Fixes: be1a1d7a5d24 ("btrfs: zoned: finish fully written block group") CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Dongliang Mu [Thu, 3 Mar 2022 14:40:27 +0000 (22:40 +0800)]
btrfs: don't access possibly stale fs_info data in device_list_add
Syzbot reported a possible use-after-free in printing information
in device_list_add.
Very similar with the bug fixed by commit 0697d9a61099 ("btrfs: don't
access possibly stale fs_info data for printing duplicate device"),
but this time the use occurs in btrfs_info_in_rcu.
Niels Dossche [Thu, 3 Mar 2022 00:38:39 +0000 (01:38 +0100)]
btrfs: add lockdep_assert_held to need_preemptive_reclaim
In a previous patch ("btrfs: extend locking to all space_info members
accesses") the locking for the space_info members was extended in
btrfs_preempt_reclaim_metadata_space because not all the member
accesses that needed locks were actually locked (bytes_pinned et al).
It was then suggested to also add a call to lockdep_assert_held to
need_preemptive_reclaim. This function also works with space_info
members. As of now, it has only two call sites which both hold the lock.
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 2 Mar 2022 01:10:21 +0000 (09:10 +0800)]
btrfs: verify the tranisd of the to-be-written dirty extent buffer
[BUG]
There is a bug report that a bitflip in the transid part of an extent
buffer makes btrfs to reject certain tree blocks:
BTRFS error (device dm-0): parent transid verify failed on 1382301696 wanted 262166 found 22
[CAUSE]
Note the failed transid check, hex(262166) = 0x40016, while
hex(22) = 0x16.
It's an obvious bitflip.
Furthermore, the reporter also confirmed the bitflip is from the
hardware, so it's a real hardware caused bitflip, and such problem can
not be detected by the existing tree-checker framework.
As tree-checker can only verify the content inside one tree block, while
generation of a tree block can only be verified against its parent.
So such problem remain undetected.
[FIX]
Although tree-checker can not verify it at write-time, we still have a
quick (but not the most accurate) way to catch such obvious corruption.
Function csum_one_extent_buffer() is called before we submit metadata
write.
Thus it means, all the extent buffer passed in should be dirty tree
blocks, and should be newer than last committed transaction.
Using that we can catch the above bitflip.
Although it's not a perfect solution, as if the corrupted generation is
higher than the correct value, we have no way to catch it at all.
Qu Wenruo [Tue, 22 Feb 2022 07:41:19 +0000 (15:41 +0800)]
btrfs: unify the error handling pattern for read_tree_block()
We had an error handling pattern for read_tree_block() like this:
eb = read_tree_block();
if (IS_ERR(eb)) {
/*
* Handling error here
* Normally ended up with return or goto out.
*/
} else if (!extent_buffer_uptodate(eb)) {
/*
* Different error handling here
* Normally also ended up with return or goto out;
*/
}
This is fine, but if we want to add extra check for each
read_tree_block(), the existing if-else-if is not that expandable and
will take reader some seconds to figure out there is no extra branch.
Here we change it to a more common way, without the extra else:
eb = read_tree_block();
if (IS_ERR(eb)) {
/*
* Handling error here
*/
return eb or goto out;
}
if (!extent_buffer_uptodate(eb)) {
/*
* Different error handling here
*/
return eb or goto out;
}
This also removes some oddball call sites which uses some creative way
to check error.
Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 23 Feb 2022 19:06:46 +0000 (14:06 -0500)]
btrfs: factor out do_free_extent_accounting helper
__btrfs_free_extent() does all of the hard work of updating the extent
ref items, and then at the end if we dropped the extent completely it
does the cleanup accounting work. We're going to only want to do that
work for metadata with extent tree v2, so extract this bit into its own
helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 23 Feb 2022 19:06:45 +0000 (14:06 -0500)]
btrfs: remove last_ref from the extent freeing code
This is a remnant of the work I did for qgroups a long time ago to only
run for a block when we had dropped the last ref. We haven't done that
for years, but the code remains. Drop this remnant.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 23 Feb 2022 19:06:44 +0000 (14:06 -0500)]
btrfs: add a alloc_reserved_extent helper
We duplicate this logic for both data and metadata, at this point we've
already done our type specific extent root operations, this is just
doing the accounting and removing the space from the free space tree.
Extract this common logic out into a helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 28 Feb 2022 16:29:29 +0000 (16:29 +0000)]
btrfs: add and use helper for unlinking inode during log replay
During log replay there is this pattern of running delayed items after
every inode unlink. To avoid repeating this several times, move the
logic into an helper function and use it instead of calling
btrfs_unlink_inode() followed by btrfs_run_delayed_items().
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Niels Dossche [Fri, 25 Feb 2022 21:20:28 +0000 (22:20 +0100)]
btrfs: extend locking to all space_info members accesses
bytes_pinned is always accessed under space_info->lock, except in
btrfs_preempt_reclaim_metadata_space, however the other members are
accessed under that lock. The reserved member of the rsv's are also
partially accessed under a lock and partially not. Move all these
accesses into the same lock to ensure consistency.
This could potentially race and lead to a flush instead of a commit but
it's not a big problem as it's only for preemptive flush.
CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Niels Dossche <niels.dossche@ugent.be> Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Naohiro Aota [Fri, 18 Feb 2022 04:14:19 +0000 (13:14 +0900)]
btrfs: zoned: mark relocation as writing
There is a hung_task issue with running generic/068 on an SMR
device. The hang occurs while a process is trying to thaw the
filesystem. The process is trying to take sb->s_umount to thaw the
FS. The lock is held by fsstress, which calls btrfs_sync_fs() and is
waiting for an ordered extent to finish. However, as the FS is frozen,
the ordered extents never finish.
Having an ordered extent while the FS is frozen is the root cause of
the hang. The ordered extent is initiated from btrfs_relocate_chunk()
which is called from btrfs_reclaim_bgs_work().
This commit adds sb_*_write() around btrfs_relocate_chunk() call
site. For the usual "btrfs balance" command, we already call it with
mnt_want_file() in btrfs_ioctl_balance().
Fixes: 18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones") CC: stable@vger.kernel.org # 5.13+ Link: https://github.com/naota/linux/issues/56 Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 14:38:14 +0000 (09:38 -0500)]
fs: allow cross-vfsmount reflink/dedupe
Currently we disallow reflink and dedupe if the two files aren't on the
same vfsmount. However we really only need to disallow it if they're
not on the same super block. It is very common for btrfs to have a main
subvolume that is mounted and then different subvolumes mounted at
different locations. It's allowed to reflink between these volumes, but
the vfsmount check disallows this. Instead fix dedupe to check for the
same superblock, and simply remove the vfsmount check for reflink as it
already does the superblock check.
Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 14:38:13 +0000 (09:38 -0500)]
btrfs: remove the cross file system checks from remap
The sb check is already done in do_clone_file_range, and the mnt check
(which will hopefully go away in a subsequent patch) is done in
ioctl_file_clone(). Remove the check in our code and put an ASSERT() to
make sure it doesn't change underneath us.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 19:56:12 +0000 (14:56 -0500)]
btrfs: pass btrfs_fs_info to btrfs_recover_relocation
We don't need a root here, we just need the btrfs_fs_info, we can just
get the specific roots we need from fs_info.
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 19:56:11 +0000 (14:56 -0500)]
btrfs: pass btrfs_fs_info for deleting snapshots and cleaner
We're passing a root around here, but we only really need the fs_info,
so fix up btrfs_clean_one_deleted_snapshot() to take an fs_info instead,
and then fix up all the callers appropriately.
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: add filesystems state details to error messages
When a filesystem goes read-only due to an error, multiple errors tend
to be reported, some of which are knock-on failures. Logging fs_states,
in btrfs_handle_fs_error() and btrfs_printk() helps distinguish the
first error from subsequent messages which may only exist due to an
error state.
Under the new format, most initial errors will look like:
`BTRFS: error (device loop0) in ...`
while subsequent errors will begin with:
`error (device loop0: state E) in ...`
An initial transaction abort error will look like
`error (device loop0: state A) in ...`
and subsequent messages will contain
`(device loop0: state EA) in ...`
In addition to the error states we can also print other states that are
temporary, like remounting, device replace, or indicate a global state
that may affect functionality.
Now implemented:
E - filesystem error detected
A - transaction aborted
L - log tree errors
M - remounting in progress
R - device replace in progress
C - data checksums not verified (mounted with ignoredatacsums)
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
This is because we are not dealing with the case where the type of a file
extent has an unexpected value (not regular, not prealloc and not inline),
in which case the transaction handle pointer is not initialized.
Such unexpected type should be impossible, except in case of some memory
corruption caused either by bad hardware or some software bug causing
something like a buffer overrun.
So ASSERT that if the extent type is neither regular nor prealloc, then
it must be inline. Bail out with -EUCLEAN and a warning in case it is
not. This silences smatch.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 17 Feb 2022 12:12:07 +0000 (12:12 +0000)]
btrfs: fix unexpected error path when reflinking an inline extent
When reflinking an inline extent, we assert that its file offset is 0 and
that its uncompressed length is not greater than the sector size. We then
return an error if one of those conditions is not satisfied. However we
use a return statement, which results in returning from btrfs_clone()
without freeing the path and buffer that were allocated before, as well as
not clearing the flag BTRFS_INODE_NO_DELALLOC_FLUSH for the destination
inode.
Fix that by jumping to the 'out' label instead, and also add a WARN_ON()
for each condition so that in case assertions are disabled, we get to
known which of the unexpected conditions triggered the error.
Fixes: a61e1e0df9f321 ("Btrfs: simplify inline extent handling when doing reflinks") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 17 Feb 2022 12:12:06 +0000 (12:12 +0000)]
btrfs: reset last_reflink_trans after fsyncing inode
When an inode has a last_reflink_trans matching the current transaction,
we have to take special care when logging its checksums in order to
avoid getting checksum items with overlapping ranges in a log tree,
which could result in missing checksums after log replay (more on that
in the changelogs of commit 40e046acbd2f36 ("Btrfs: fix missing data
checksums after replaying a log tree") and commit e289f03ea79bbc ("btrfs:
fix corrupt log due to concurrent fsync of inodes with shared extents")).
We also need to make sure a full fsync will copy all old file extent
items it finds in modified leaves, because they might have been copied
from some other inode.
However once we fsync an inode, we don't need to keep paying the price of
that extra special care in future fsyncs done in the same transaction,
unless the inode is used for another reflink operation or the full sync
flag is set on it (truncate, failure to allocate extent maps for holes,
and other exceptional and infrequent cases).
So after we fsync an inode reset its last_unlink_trans to zero. In case
another reflink happens, we continue to update the last_reflink_trans of
the inode, just as before. Also set last_reflink_trans to the generation
of the last transaction that modified the inode whenever we need to set
the full sync flag on the inode, just like when we need to load an inode
from disk after eviction.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 17 Feb 2022 12:12:05 +0000 (12:12 +0000)]
btrfs: voluntarily relinquish cpu when doing a full fsync
Doing a full fsync may require processing many leaves of metadata, which
can take some time and result in a task monopolizing a cpu for too long.
So add a cond_resched() after processing a leaf when doing a full fsync,
while not holding any locks on any tree (a subvolume or a log tree).
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 17 Feb 2022 12:12:04 +0000 (12:12 +0000)]
btrfs: hold on to less memory when logging checksums during full fsync
When doing a full fsync, at copy_items(), we iterate over all extents and
then collect their checksums into a list. After copying all the extents to
the log tree, we then log all the previously collected checksums.
Before the previous patch in the series (subject "btrfs: stop copying old
file extents when doing a full fsync"), we had to do it this way, because
while we were iterating over the items in the leaf of the subvolume tree,
we were holding a write lock on a leaf of the log tree, so logging the
checksums for an extent right after we collected them could result in a
deadlock, in case the checksum items ended up in the same leaf.
However after the previous patch in the series we now do a first iteration
over all the items in the leaf of the subvolume tree before locking a path
in the log tree, so we can now log the checksums right after we have
obtained them. This avoids holding in memory all checksums for all extents
in the leaf while copying items from the source leaf to the log tree. The
amount of memory used to hold all checksums of the extents in a leaf can
be significant. For example if a leaf has 200 file extent items referring
to 1M extents, using the default crc32c checksums, would result in using
over 200K of memory (not accounting for the extra overhead of struct
btrfs_ordered_sum), with smaller or less extents it would be less, but
it could be much more with more extents per leaf and/or much larger
extents.
So change copy_items() to log the checksums for an extent after looking
them up, and then free their memory, as they are no longer necessary.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 17 Feb 2022 12:12:03 +0000 (12:12 +0000)]
btrfs: stop copying old file extents when doing a full fsync
When logging an inode in full sync mode, we go over every leaf that was
modified in the current transaction and has items associated to our inode,
and then copy all those items into the log tree. This includes copying
file extent items that were created and added to the inode in past
transactions, which is useless and only makes use more leaf space in the
log tree.
It's common to have a file with many file extent items spanning many
leaves where only a few file extent items are new and need to be logged,
and in such case we log all the file extent items we find in the modified
leaves.
So change the full sync behaviour to skip over file extent items that are
not needed. Those are the ones that match the following criteria:
1) Have a generation older than the current transaction and the inode
was not a target of a reflink operation, as that can copy file extent
items from a past generation from some other inode into our inode, so
we have to log them;
2) Start at an offset within i_size - we must log anything at or beyond
i_size, otherwise we would lose prealloc extents after log replay.
The following script exercises a scenario where this happens, and it's
somehow close enough to what happened often on a SQL Server workload which
I had to debug sometime ago to fix an issue where a pattern of writes to
prealloc extents and fsync resulted in fsync failing with -EIO (that was
commit ea7036de0d36c4 ("btrfs: fix fsync failure and transaction abort
after writes to prealloc extents")). In that particular case, we had large
files that had random writes and were often truncated, which made the
next fsync be a full sync.
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
# Create a file with many extents. Use direct IO to make it faster
# to create the file - using buffered IO we would have to fsync
# after each write (terribly slow).
echo "Creating file with $((FILE_SIZE / 4096)) extents of 4K each..."
xfs_io -f -d -c "pwrite -b 4K 0 $FILE_SIZE" $MNT/foobar
# Commit the transaction, so every extent after this is from an
# old generation.
sync
# Now rewrite only a few extents, which are all far spread apart from
# each other (e.g. 1G / 32M = 32 extents).
# After this only a few extents have a new generation, while all other
# ones have an old generation.
echo "Rewriting $((FILE_SIZE / (32 * 1024 * 1024))) extents..."
for ((i = 0; i < $FILE_SIZE; i += $((32 * 1024 * 1024)))); do
xfs_io -c "pwrite $i 4K" $MNT/foobar >/dev/null
done
# Fsync, the inode logged in full sync mode since it was never fsynced
# before.
echo "Fsyncing file..."
xfs_io -c "fsync" $MNT/foobar
umount $MNT
And the following bpftrace program was running when executing the test
script:
Josef Bacik [Fri, 18 Feb 2022 15:03:29 +0000 (10:03 -0500)]
btrfs: do not clean up repair bio if submit fails
The submit helper will always run bio_endio() on the bio if it fails to
submit, so cleaning up the bio just leads to a variety of use-after-free
and NULL pointer dereference bugs because we race with the endio
function that is cleaning up the bio. Instead just return BLK_STS_OK as
the repair function has to continue to process the rest of the pages,
and the endio for the repair bio will do the appropriate cleanup for the
page that it was given.
Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 15:03:28 +0000 (10:03 -0500)]
btrfs: do not try to repair bio that has no mirror set
If we fail to submit a bio for whatever reason, we may not have setup a
mirror_num for that bio. This means we shouldn't try to do the repair
workflow, if we do we'll hit an BUG_ON(!failrec->this_mirror) in
clean_io_failure. Instead simply skip the repair workflow if we have no
mirror set, and add an assert to btrfs_check_repairable() to make it
easier to catch what is happening in the future.
Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 15:03:27 +0000 (10:03 -0500)]
btrfs: do not double complete bio on errors during compressed reads
I hit some weird panics while fixing up the error handling from
btrfs_lookup_bio_sums(). Turns out the compression path will complete
the bio we use if we set up any of the compression bios and then return
an error, and then btrfs_submit_data_bio() will also call bio_endio() on
the bio.
Fix this by making btrfs_submit_compressed_read() responsible for
calling bio_endio() on the bio if there are any errors. Currently it
was only doing it if we created the compression bios, otherwise it was
depending on btrfs_submit_data_bio() to do the right thing. This
creates the above problem, so fix up btrfs_submit_compressed_read() to
always call bio_endio() in case of an error, and then simply return from
btrfs_submit_data_bio() if we had to call
btrfs_submit_compressed_read().
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 15:03:26 +0000 (10:03 -0500)]
btrfs: track compressed bio errors as blk_status_t
Right now we just have a binary "errors" flag, so any error we get on
the compressed bio's gets translated to EIO. This isn't necessarily a
bad thing, but if we get an ENOMEM it may be nice to know that's what
happened instead of an EIO. Track our errors as a blk_status_t, and do
the appropriate setting of the errors accordingly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 15:03:25 +0000 (10:03 -0500)]
btrfs: remove the bio argument from finish_compressed_bio_read
This bio is usually one of the compressed bio's, and we don't actually
need it in this function, so remove the argument and stop passing it
around.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 15:03:24 +0000 (10:03 -0500)]
btrfs: check correct bio in finish_compressed_bio_read
Commit c09abff87f90 ("btrfs: cloned bios must not be iterated by
bio_for_each_segment_all") added ASSERT()'s to make sure we weren't
calling bio_for_each_segment_all() on a RAID5/6 bio. However it was
checking the bio that the compression code passed in, not the
cb->orig_bio that we actually iterate over, so adjust this ASSERT() to
check the correct bio.
Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 15:03:23 +0000 (10:03 -0500)]
btrfs: handle csum lookup errors properly on reads
Currently any error we get while trying to lookup csums during reads
shows up as a missing csum, and then on the read completion side we
print an error saying there was a csum mismatch and we increase the
device corruption count.
However we could have gotten an EIO from the lookup. We could also be
inside of a memory constrained container and gotten a ENOMEM while
trying to do the read. In either case we don't want to make this look
like a file system corruption problem, we want to make it look like the
actual error it is. Capture any negative value, convert it to the
appropriate blk_status_t, free the csum array if we have one and bail.
Note: a possible improvement would be to make the relocation code look
up the owning inode and see if it's marked as NODATASUM and set
EXTENT_NODATASUM there, that way if there's corruption and there isn't a
checksum when we want it we can fail here rather than later.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 18 Feb 2022 15:03:22 +0000 (10:03 -0500)]
btrfs: make search_csum_tree return 0 if we get -EFBIG
We can either fail to find a csum entry at all and return -ENOENT, or we
can find a range that is close, but return -EFBIG. In essence these
both mean the same thing when we are doing a lookup for a csum in an
existing range, we didn't find a csum. We want to treat both of these
errors the same way, complain loudly that there wasn't a csum. This
currently happens anyway because we do
count = search_csum_tree();
if (count <= 0) {
// reloc and error handling
}
However it forces us to incorrectly treat EIO or ENOMEM errors as on
disk corruption. Fix this by returning 0 if we get either -ENOENT or
-EFBIG from btrfs_lookup_csum() so we can do proper error handling.
Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 13 Aug 2019 23:00:02 +0000 (16:00 -0700)]
btrfs: add BTRFS_IOC_ENCODED_WRITE
The implementation resembles direct I/O: we have to flush any ordered
extents, invalidate the page cache, and do the io tree/delalloc/extent
map/ordered extent dance. From there, we can reuse the compression code
with a minor modification to distinguish the write from writeback. This
also creates inline extents when possible.
Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Thu, 10 Oct 2019 00:59:07 +0000 (17:59 -0700)]
btrfs: add BTRFS_IOC_ENCODED_READ ioctl
There are 4 main cases:
1. Inline extents: we copy the data straight out of the extent buffer.
2. Hole/preallocated extents: we fill in zeroes.
3. Regular, uncompressed extents: we read the sectors we need directly
from disk.
4. Regular, compressed extents: we read the entire compressed extent
from disk and indicate what subset of the decompressed extent is in
the file.
This initial implementation simplifies a few things that can be improved
in the future:
- Cases 1, 3, and 4 allocate temporary memory to read into before
copying out to userspace.
- We don't do read repair, because it turns out that read repair is
currently broken for compressed data.
- We hold the inode lock during the operation.
Note that we don't need to hold the mmap lock. We may race with
btrfs_page_mkwrite() and read the old data from before the page was
dirtied:
btrfs_page_mkwrite btrfs_encoded_read
---------------------------------------------------
(enter) (enter)
btrfs_wait_ordered_range
lock_extent_bits
btrfs_page_set_dirty
unlock_extent_cached
(exit)
lock_extent_bits
read extent (dirty page hasn't been flushed,
so this is the old data)
unlock_extent_cached
(exit)
we read the old data from before the page was dirtied. But, that's true
even if we were to hold the mmap lock:
btrfs_page_mkwrite btrfs_encoded_read
-------------------------------------------------------------------
(enter) (enter)
btrfs_inode_lock(BTRFS_ILOCK_MMAP)
down_read(i_mmap_lock) (blocked)
btrfs_wait_ordered_range
lock_extent_bits
read extent (page hasn't been dirtied,
so this is the old data)
unlock_extent_cached
btrfs_inode_unlock(BTRFS_ILOCK_MMAP)
down_read(i_mmap_lock) returns
lock_extent_bits
btrfs_page_set_dirty
unlock_extent_cached
In other words, this is inherently racy, so it's fine that we return the
old data in this tiny window.
Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Mon, 16 Aug 2021 22:58:29 +0000 (15:58 -0700)]
btrfs: add definitions and documentation for encoded I/O ioctls
In order to allow sending and receiving compressed data without
decompressing it, we need an interface to write pre-compressed data
directly to the filesystem and the matching interface to read compressed
data without decompressing it. This adds the definitions for ioctls to
do that and detailed explanations of how to use them.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Thu, 7 Nov 2019 23:19:16 +0000 (15:19 -0800)]
btrfs: optionally extend i_size in cow_file_range_inline()
Currently, an inline extent is always created after i_size is extended
from btrfs_dirty_pages(). However, for encoded writes, we only want to
update i_size after we successfully created the inline extent. Add an
update_i_size parameter to cow_file_range_inline() and
insert_inline_extent() and pass in the size of the extent rather than
determining it from i_size.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comment ] Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 16 Nov 2021 22:03:45 +0000 (14:03 -0800)]
btrfs: clean up cow_file_range_inline()
The start parameter to cow_file_range_inline() (and
insert_inline_extent()) is always 0, so get rid of it and simplify the
logic in those two functions. Pass btrfs_inode to insert_inline_extent()
and remove the redundant root parameter. Also document the requirements
for creating an inline extent. No functional change.
Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 19 Nov 2019 06:45:55 +0000 (22:45 -0800)]
btrfs: support different disk extent size for delalloc
Currently, we always reserve the same extent size in the file and extent
size on disk for delalloc because the former is the worst case for the
latter. For BTRFS_IOC_ENCODED_WRITE writes, we know the exact size of
the extent on disk, which may be less than or greater than (for
bookends) the size in the file. Add a disk_num_bytes parameter to
btrfs_delalloc_reserve_metadata() so that we can reserve the correct
amount of csum bytes. No functional change.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Wed, 6 Nov 2019 20:11:56 +0000 (12:11 -0800)]
btrfs: add ram_bytes and offset to btrfs_ordered_extent
Currently, we only create ordered extents when ram_bytes == num_bytes
and offset == 0. However, BTRFS_IOC_ENCODED_WRITE writes may create
extents which only refer to a subset of the full unencoded extent, so we
need to plumb these fields through the ordered extent infrastructure and
pass them down to insert_reserved_file_extent().
Since we're changing the btrfs_add_ordered_extent* signature, let's get
rid of the trivial wrappers and add a kernel-doc.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Wed, 6 Nov 2019 23:38:43 +0000 (15:38 -0800)]
btrfs: don't advance offset for compressed bios in btrfs_csum_one_bio()
btrfs_csum_one_bio() loops over each filesystem block in the bio while
keeping a cursor of its current logical position in the file in order to
look up the ordered extent to add the checksums to. However, this
doesn't make much sense for compressed extents, as a sector on disk does
not correspond to a sector of decompressed file data. It happens to work
because:
1) the compressed bio always covers one ordered extent
2) the size of the bio is always less than the size of the ordered
extent
However, the second point will not always be true for encoded writes.
Let's add a boolean parameter to btrfs_csum_one_bio() to indicate that
it can assume that the bio only covers one ordered extent. Since we're
already changing the signature, let's get rid of the contig parameter
and make it implied by the offset parameter, similar to the change we
recently made to btrfs_lookup_bio_sums(). Additionally, let's rename
nr_sectors to blockcount to make it clear that it's the number of
filesystem blocks, not the number of 512-byte sectors.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Thu, 12 Aug 2021 22:34:57 +0000 (15:34 -0700)]
fs: export variant of generic_write_checks without iov_iter
Encoded I/O in Btrfs needs to check a write with a given logical size
without an iov_iter that matches that size (because the iov_iter we have
is for the compressed data). So, factor out the parts of
generic_write_check() that don't need an iov_iter into a new
generic_write_checks_count() function and export that.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Sidong Yang [Sun, 6 Feb 2022 12:52:48 +0000 (12:52 +0000)]
btrfs: qgroup: remove duplicated check in adding qgroup relations
Removes duplicated check when adding qgroup relations.
btrfs_add_qgroup_relations function adds relations by calling
add_relation_rb(). add_relation_rb() checks that member/parentid exists
in current qgroup_tree. But it already checked before calling the
function. It seems that we don't need to double check.
Add new function __add_relation_rb() that adds relations with
qgroup structures and makes old function use the new one. And it makes
btrfs_add_qgroup_relation() function work without double checks by
calling the new function.
Signed-off-by: Sidong Yang <realwakka@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ add comments ] Signed-off-by: David Sterba <dsterba@suse.com>
[CAUSE]
Since extent_map::generation is mostly used by fsync code, and for fsync
they only care about modified extents, which all have their
em::generation > 0.
Thus it's fine to not populate em read from disk for fsync.
[CORNER CASE]
However autodefrag also relies on em::generation to determine if one
extent needs to be defragged.
This unpopulated extent_map::generation can prevent the following
autodefrag case from working:
mkfs.btrfs -f $dev
mount $dev $mnt -o autodefrag
# initial write to queue the inode for autodefrag
xfs_io -f -c "pwrite 0 4k" $mnt/file
sync
Filipe Manana [Thu, 3 Feb 2022 15:36:45 +0000 (15:36 +0000)]
btrfs: assert we have a write lock when removing and replacing extent maps
Removing or replacing an extent map requires holding a write lock on the
extent map's tree. We currently do that everywhere, except in one of the
self tests, where it's harmless since there's no concurrency.
In order to catch possible races in the future, assert that we are holding
a write lock on the extent map tree before removing or replacing an extent
map in the tree, and update the self test to obtain a write lock before
removing extent maps.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 15:36:44 +0000 (15:36 +0000)]
btrfs: remove no longer used counter when reading data page
After commit 92082d40976ed0 ("btrfs: integrate page status update for
data read path into begin/end_page_read"), the 'nr' counter at
btrfs_do_readpage() is no longer used, we increment it but we never
read from it. So just remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 15:36:43 +0000 (15:36 +0000)]
btrfs: fix lost error return value when reading a data page
At btrfs_do_readpage(), if we get an error when trying to lookup for an
extent map, we end up marking the page with the error bit, clearing
the uptodate bit on it, and doing everything else that should be done.
However we return success (0) to the caller, when we should return the
error encoded in the extent map pointer. So fix that by returning the
error encoded in the pointer.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 15:36:42 +0000 (15:36 +0000)]
btrfs: stop checking for NULL return from btrfs_get_extent()
At extent_io.c, in the read page and write page code paths, we are testing
if the return value from btrfs_get_extent() can be NULL. However that is
not possible, as btrfs_get_extent() always returns either an error pointer
or a (non-NULL) pointer to an extent map structure.
Everywhere else outside extent_io.c we never check for NULL, we always
treat any returned value as a non-NULL pointer if it does not encode an
error.
So check only for the IS_ERR() case at extent_io.c.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:50 +0000 (14:55 +0000)]
btrfs: prepare extents to be logged before locking a log tree path
When we want to log an extent, in the fast fsync path, we obtain a path
to the leaf that will hold the file extent item either through a deletion
search, via btrfs_drop_extents(), or through an insertion search using
btrfs_insert_empty_item(). After that we fill the file extent item's
fields one by one directly on the leaf.
Instead of doing that, we could prepare the file extent item before
obtaining a btree path, and then copy the prepared extent item with a
single operation once we get the path. This helps avoid some contention
on the log tree, since we are holding write locks for longer than
necessary, especially in the case where the path is obtained via
btrfs_drop_extents() through a deletion search, which always keeps a
write lock on the nodes at levels 1 and 2 (besides the leaf).
This change does that, we prepare the file extent item that is going to
be inserted before acquiring a path, and then copy it into a leaf using
a single copy operation once we get a path.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The following test was run to measure the impact of the whole patchset:
The test ran inside a VM (8 cores, 32G of RAM) with the target disk
mapping to a raw NVMe device, and using a non-debug kernel config
(Debian's default config).
Filipe Manana [Thu, 3 Feb 2022 14:55:49 +0000 (14:55 +0000)]
btrfs: remove useless path release in the fast fsync path
There's no point in calling btrfs_release_path() after finishing the loop
that logs the modified extents, since log_one_extent() returns with the
path released. In case the list of extents is empty, the path is already
released, so there's no need for that case as well.
So just remove that unnecessary btrfs_release_path() call.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:48 +0000 (14:55 +0000)]
btrfs: remove constraint on number of visited leaves when replacing extents
At btrfs_drop_extents(), we try to replace a range of file extent items
with a new file extent in a single btree search, to avoid the need to do
a search for deletion, followed by a path release and followed by yet
another search for insertion.
When I originally added that optimization, in commit 1acae57b161ef1
("Btrfs: faster file extent item replace operations"), I left a constraint
to do the fast replace only if we visited a single leaf. That was because
in the most common case we find all file extent items that need to be
deleted (or trimmed) in a single leaf, however it can work for other
common cases like when we need to delete a few file extent items located
at the end of a leaf and a few more located at the beginning of the next
leaf. The key for the new file extent item is greater than the key of
any deleted or trimmed file extent item from previous leaves, so we are
fine to use the last leaf that we found as long as we are holding a
write lock on it - even if the new key ends up at slot 0, as if that's
the case, the btree search has obtained a write lock on any upper nodes
that need to have a key pointer updated.
So removed the constraint that limits the optimization to the case where
we visited only a single leaf.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:47 +0000 (14:55 +0000)]
btrfs: avoid unnecessary computation when deleting items from a leaf
When deleting items from a leaf, we always compute the sum of the data
sizes of the items that are going to be deleted. However we only use
that sum when the last item to delete is behind the last item in the
leaf. This unnecessarily wastes CPU time when we are deleting either
the whole leaf or from some slot > 0 up to the last item in the leaf,
and both of these cases are common (e.g. truncation operation, either
as a result of truncate(2) or when logging inodes, deleting checksums
after removing a large enough extent, etc).
So compute only the sum of the data sizes if the last item to be
deleted does not match the last item in the leaf.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:46 +0000 (14:55 +0000)]
btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
When we delete items from a leaf, if we end up with more than two thirds
of unused leaf space, we try to delete the leaf by moving all its items
into its left and right neighbour leaves. Sometimes that is not possible
because there is not enough free space in the left and right leaves, and
in that case we end up not deleting our leaf.
The way we are doing this is not ideal and can be improved in the
following ways:
1) When we call push_leaf_left(), we pass a value of 1 byte to the data
size parameter of push_leaf_left(). This is not realistic value because
no item can have a size less than 25 bytes, which is the size of struct
btrfs_item. This means that means that if the left leaf has not enough
free space to push any item, we end up COWing it even if we end up not
changing its content at all.
COWing that leaf means allocating a new metadata extent, marking it
dirty and doing more IO when committing a transaction or when syncing a
log tree. For a log tree case, it's particularly more important to
avoid the useless COW operation, as more IO can imply a higher latency
for an fsync operation.
So instead of passing 1 as the minimum data size for push_leaf_left(),
pass the size of the first item in our leaf, as we don't want to COW
the left leaf if we can't at least push the first item of our leaf;
2) When we call push_leaf_right(), we also pass a value of 1 byte as the
data size parameter of push_leaf_right(). Like the previous case, it
will also result in COWing the right leaf even if we are not able to
move any items into it, since there can't be any item with a size
smaller than 25 bytes (the size of struct btrfs_item).
So instead of passing 1 as the minimum data size to push_leaf_right(),
pass a size that corresponds to the sum of the size of all the
remaining items in our leaf. We are not interested in moving less than
that, because if we do, we are not able to delete our leaf and we have
COWed the right leaf for nothing. Plus, moving only some of the items
of our leaf, it means an even less balanced tree.
Just like the previous case, we want to avoid the useless COW of the
right leaf, this way we don't have to spend time allocating one new
metadata extent, and doing more IO when committing a transaction or
syncing a log tree. For the log tree case it's specially more important
because more IO can result in a higher latency for a fsync operation.
So adjust the minimum data size passed to push_leaf_left() and
push_leaf_right() as mentioned above.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
Not being able to delete a leaf that became less than 1/3 full after
deleting items from it is actually common. For example, for the fio test
mentioned in the changelog of patch 6/6, we are only able to delete a
leaf at btrfs_del_items() about 5.3% of the time, due to its left and
right neighbour leaves not having enough free space to push all the
remaining items into them.
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 3 Feb 2022 14:55:45 +0000 (14:55 +0000)]
btrfs: remove unnecessary leaf free space checks when pushing items
When trying to push items from a leaf into its left and right neighbours,
we lock the left or right leaf, check if it has the required minimum free
space, COW the leaf and then check again if it has the minimum required
free space. This second check is pointless:
1) Most and foremost because it's not needed. We have a write lock on the
leaf and on its parent node, so no one can come in and change either
the pre-COW or post-COW version of the leaf for the whole duration of
the push_leaf_left() and push_leaf_right() calls;
2) The call to btrfs_leaf_free_space() is not trivial, it has a fair
amount of arithmetic operations and access to fields in the leaf's
header and items, so it's not very cheap.
So remove the duplicated free space checks.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: stop checking for NULL return from btrfs_get_extent_fiemap()
In get_extent_skip_holes() we're checking the return of
btrfs_get_extent_fiemap() for an error pointer or NULL, but
btrfs_get_extent_fiemap() will never return NULL, only error pointers or
a valid extent_map.
The other caller of btrfs_get_extent_fiemap(), find_desired_extent(),
correctly only checks for error-pointers.
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 1 Feb 2022 14:42:07 +0000 (15:42 +0100)]
btrfs: replace BUILD_BUG_ON by static_assert
The static_assert introduced in 6bab69c65013 ("build_bug.h: add wrapper
for _Static_assert") has been supported by compilers for a long time
(gcc 4.6, clang 3.0) and can be used in header files. We don't need to
put BUILD_BUG_ON to random functions but rather keep it next to the
definition.
The exception here is the UAPI header btrfs_tree.h that could be
potentially included by userspace code and the static assert is not
defined (nor used in any other header).
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
Allow creating or reading block-groups on a zoned device with DUP as a
meta-data profile.
This works because we're using the zoned_meta_io_lock and REQ_OP_WRITE
operations for meta-data on zoned btrfs, so all writes to meta-data zones
are aligned to the zone's write-pointer.
Upon loading of the block-group, it is ensured both zones do have the same
zone capacity and write-pointer offsets, so no extra machinery is needed
to keep the write-pointers in sync for the meta-data zones. If this
prerequisite is not met, loading of the block-group is refused.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:08 +0000 (15:40 -0500)]
btrfs: add support for multiple global roots
With extent tree v2 you will be able to create multiple csum, extent,
and free space trees. They will be used based on the block group, which
will now use the block_group_item->chunk_objectid to point to the set of
global roots that it will use. When allocating new block groups we'll
simply mod the gigabyte offset of the block group against the number of
global roots we have and that will be the block groups global id.
>From there we can take the bytenr that we're modifying in the respective
tree, look up the block group and get that block groups corresponding
global root id. From there we can get to the appropriate global root
for that bytenr.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:06 +0000 (15:40 -0500)]
btrfs: abstract out loading the tree root
We're going to be adding more roots that need to be loaded from the
super block, so abstract out the code to read the tree_root from the
super block, and use this helper for the chunk root as well. This will
make it simpler to load the new trees in the future.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:04 +0000 (15:40 -0500)]
btrfs: disable space cache related mount options for extent tree v2
We cannot fall back on the slow caching for extent tree v2, which means
we can't just arbitrarily clear the free space trees at mount time.
Furthermore we can't do v1 space cache with extent tree v2. Simply
ignore these mount options for extent tree v2 as they aren't relevant.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:02 +0000 (15:40 -0500)]
btrfs: disable scrub for extent-tree-v2
Scrub depends on extent references for every block, and with extent tree
v2 we won't have that, so disable scrub until we can add back the proper
code to handle extent-tree-v2.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:40:01 +0000 (15:40 -0500)]
btrfs: disable qgroups in extent tree v2
Backref lookups are going to be drastically different with extent tree
v2, disable qgroups until we do the work to add this support for extent
tree v2.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 15 Dec 2021 20:39:59 +0000 (15:39 -0500)]
btrfs: disable balance for extent tree v2 for now
With global root id's it makes it problematic to do backref lookups for
balance. This isn't hard to deal with, but future changes are going to
make it impossible to lookup backrefs on any COWonly roots, so go ahead
and disable balance for now on extent tree v2 until we can add balance
support back in future patches.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 20 Jan 2022 11:00:11 +0000 (11:00 +0000)]
btrfs: use single variable to track return value at btrfs_log_inode()
At btrfs_log_inode(), we have two variables to track errors and the
return value of the function, named 'ret' and 'err'. In some places we
use 'ret' and if gets a non-zero value we assign its value to 'err'
and then jump to the 'out' label, while in other places we use 'err'
directly without 'ret' as an intermediary. This is inconsistent, error
prone and not necessary. So change that to use only the 'ret' variable,
making this consistent with most functions in btrfs.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 20 Jan 2022 11:00:10 +0000 (11:00 +0000)]
btrfs: avoid inode logging during rename and link when possible
During a rename or link operation, we need to determine if an inode was
previously logged or not, and if it was, do some update to the logged
inode. We used to rely exclusively on the logged_trans field of struct
btrfs_inode to determine that, but that was not reliable because the
value of that field is not persisted in the inode item, so it's lost
when an inode is evicted and loaded back again. That led to several
issues in the past, such as not persisting deletions (such as the case
fixed by commit 803f0f64d17769 ("Btrfs: fix fsync not persisting dentry
deletions due to inode evictions")), or resulting in losing a file
after an inode eviction followed by a rename (commit ecc64fab7d49c6
("btrfs: fix lost inode on log replay after mix of fsync, rename and
inode eviction")), besides other issues.
So the inode_logged() helper was introduced and used to determine if an
inode was possibly logged before in the current transaction, with the
caveat that it could return false positives, in the sense that even if an
inode was not logged before in the current transaction, it could still
return true, but never to return false in case the inode was logged.
>From a functional point of view that is fine, but from a performance
perspective it can introduce significant latencies to rename and link
operations, as they will end up doing inode logging even when it is not
necessary.
Recently on a 5.15 kernel, an openSUSE Tumbleweed user reported package
installations and upgrades, with the zypper tool, were often taking a
long time to complete. With strace it could be observed that zypper was
spending about 99% of its time on rename operations, and then with
further analysis we checked that directory logging was happening too
frequently. Taking into account that installation/upgrade of some of the
packages needed a few thousand file renames, the slowdown was very
noticeable for the user.
The issue was caused indirectly due to an excessive number of inode
evictions on a 5.15 kernel, about 100x more compared to a 5.13, 5.14 or
a 5.16-rc8 kernel. While triggering the inode evictions if something
outside btrfs' control, btrfs could still behave better by eliminating
the false positives from the inode_logged() helper.
So change inode_logged() to actually eliminate such false positives caused
by inode eviction and when an inode was never logged since the filesystem
was mounted, as both cases relate to when the logged_trans field of struct
btrfs_inode has a value of zero. When it can not determine if the inode
was logged based only on the logged_trans value, lookup for the existence
of the inode item in the log tree - if it's there then we known the inode
was logged, if it's not there then it can not have been logged in the
current transaction. Once we determine if the inode was logged, update
the logged_trans value to avoid future calls to have to search in the log
tree again.
Alternatively, we could start storing logged_trans in the on disk inode
item structure (struct btrfs_inode_item) in the unused space it still has,
but that would be a bit odd because:
1) We only care about logged_trans since the filesystem was mounted, we
don't care about its value from a previous mount. Having it persisted
in the inode item structure would not make the best use of the precious
unused space;
2) In order to get logged_trans persisted before inode eviction, we would
have to update the delayed inode when we finish logging the inode and
update its logged_trans in struct btrfs_inode, which makes it a bit
cumbersome since we need to check if the delayed inode exists, if not
create it and populate it and deal with any errors (-ENOMEM mostly).
This change is part of a patchset comprised of the following patches:
1/5 btrfs: add helper to delete a dir entry from a log tree
2/5 btrfs: pass the dentry to btrfs_log_new_name() instead of the inode
3/5 btrfs: avoid logging all directory changes during renames
4/5 btrfs: stop doing unnecessary log updates during a rename
5/5 btrfs: avoid inode logging during rename and link when possible
The following test script mimics part of what the zypper tool does during
package installations/upgrades. It does not triggers inode evictions, but
it's similar because it triggers false positives from the inode_logged()
helper, because the inodes have a logged_trans of 0, there's a log tree
due to a fsync of an unrelated file and the directory inode has its
last_trans field set to the current transaction:
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=10000
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
# Now do some change to an unrelated file and fsync it.
# This is just to create a log tree to make sure that inode_logged()
# does not return false when called against "testdir".
xfs_io -f -c "pwrite 0 4K" -c "fsync" $MNT/foo
# Do some change to testdir. This is to make sure inode_logged()
# will return true when called against "testdir", because its
# logged_trans is 0, it was changed in the current transaction
# and there's a log tree.
echo -n > $MNT/testdir/file_$((NUM_FILES + 1))
echo "Renaming $NUM_FILES files..."
start=$(date +%s%N)
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE
done
end=$(date +%s%N)
Testing this change on a box using a non-debug kernel (Debian's default
kernel config) gave the following results:
NUM_FILES=10000, before patchset: 27837 ms
NUM_FILES=10000, after patches 1/5 to 4/5 applied: 9236 ms (-66.8%)
NUM_FILES=10000, after whole patchset applied: 8902 ms (-68.0%)
NUM_FILES=5000, before patchset: 9127 ms
NUM_FILES=5000, after patches 1/5 to 4/5 applied: 4640 ms (-49.2%)
NUM_FILES=5000, after whole patchset applied: 4441 ms (-51.3%)
NUM_FILES=2000, before patchset: 2528 ms
NUM_FILES=2000, after patches 1/5 to 4/5 applied: 1983 ms (-21.6%)
NUM_FILES=2000, after whole patchset applied: 1747 ms (-30.9%)
NUM_FILES=1000, before patchset: 1085 ms
NUM_FILES=1000, after patches 1/5 to 4/5 applied: 893 ms (-17.7%)
NUM_FILES=1000, after whole patchset applied: 867 ms (-20.1%)
Running dbench on the same physical machine with the following script:
Filipe Manana [Thu, 20 Jan 2022 11:00:09 +0000 (11:00 +0000)]
btrfs: stop doing unnecessary log updates during a rename
During a rename, we call __btrfs_unlink_inode(), which will call
btrfs_del_inode_ref_in_log() and btrfs_del_dir_entries_in_log(), in order
to remove an inode reference and a directory entry from the log. These
are necessary when __btrfs_unlink_inode() is called from the unlink path,
but not necessary when it's called from a rename context, because:
1) For the btrfs_del_inode_ref_in_log() call, it's pointless to delete the
inode reference related to the old name, because later in the rename
path we call btrfs_log_new_name(), which will drop all inode references
from the log and copy all inode references from the subvolume tree to
the log tree. So we are doing one unnecessary btree operation which
adds additional latency and lock contention in case there are other
tasks accessing the log tree;
2) For the btrfs_del_dir_entries_in_log() call, we are now doing the
equivalent at btrfs_log_new_name() since the previous patch in the
series, that has the subject "btrfs: avoid logging all directory
changes during renames". In fact, having __btrfs_unlink_inode() call
this function not only adds additional latency and lock contention due
to the extra btree operation, but also can make btrfs_log_new_name()
unnecessarily log a range item to track the deletion of the old name,
since it has no way to known that the directory entry related to the
old name was previously logged and already deleted by
__btrfs_unlink_inode() through its call to
btrfs_del_dir_entries_in_log().
So skip those calls at __btrfs_unlink_inode() when we are doing a rename.
Skipping them also allows us now to reduce the duration of time we are
pinning a log transaction during renames, which is always beneficial as
it's not delaying so much other tasks trying to sync the log tree, in
particular we end up not holding the log transaction pinned while adding
the new name (adding inode ref, directory entry, etc).
This change is part of a patchset comprised of the following patches:
1/5 btrfs: add helper to delete a dir entry from a log tree
2/5 btrfs: pass the dentry to btrfs_log_new_name() instead of the inode
3/5 btrfs: avoid logging all directory changes during renames
4/5 btrfs: stop doing unnecessary log updates during a rename
5/5 btrfs: avoid inode logging during rename and link when possible
Just like the previous patch in the series, "btrfs: avoid logging all
directory changes during renames", the following script mimics part of
what a package installation/upgrade with zypper does, which is basically
renaming a lot of files, in some directory under /usr, to a name with a
suffix of "-RPMDELETE":
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=10000
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
# Do some change to testdir and fsync it.
echo -n > $MNT/testdir/file_$((NUM_FILES + 1))
xfs_io -c "fsync" $MNT/testdir
echo "Renaming $NUM_FILES files..."
start=$(date +%s%N)
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE
done
end=$(date +%s%N)
Testing this change on box a using a non-debug kernel (Debian's default
kernel config) gave the following results:
NUM_FILES=10000, before patchset: 27399 ms
NUM_FILES=10000, after patches 1/5 to 3/5 applied: 9093 ms (-66.8%)
NUM_FILES=10000, after patches 1/5 to 4/5 applied: 9016 ms (-67.1%)
NUM_FILES=5000, before patchset: 9241 ms
NUM_FILES=5000, after patches 1/5 to 3/5 applied: 4642 ms (-49.8%)
NUM_FILES=5000, after patches 1/5 to 4/5 applied: 4553 ms (-50.7%)
NUM_FILES=2000, before patchset: 2550 ms
NUM_FILES=2000, after patches 1/5 to 3/5 applied: 1788 ms (-29.9%)
NUM_FILES=2000, after patches 1/5 to 4/5 applied: 1767 ms (-30.7%)
NUM_FILES=1000, before patchset: 1088 ms
NUM_FILES=1000, after patches 1/5 to 3/5 applied: 905 ms (-16.9%)
NUM_FILES=1000, after patches 1/5 to 4/5 applied: 883 ms (-18.8%)
The next patch in the series (5/5), also contains dbench results after
applying to whole patchset.
Filipe Manana [Thu, 20 Jan 2022 11:00:08 +0000 (11:00 +0000)]
btrfs: avoid logging all directory changes during renames
When doing a rename of a file, if the file or its old parent directory
were logged before, we log the new name of the file and then make sure
we log the old parent directory, to ensure that after a log replay the
old name of the file is deleted and the new name added.
The logging of the old parent directory can take some time, because it
will scan all leaves modified in the current transaction, check which
directory entries were already logged, copy the ones that were not
logged before, etc. In this rename context all we need to do is make
sure that the old name of the file is deleted on log replay, so instead
of triggering a directory log operation, we can just delete the old
directory entry from the log if it's there, or in case it isn't there,
just log a range item to signal log replay that the old name must be
deleted. So change btrfs_log_new_name() to do that.
This scenario is actually not uncommon to trigger, and recently on a
5.15 kernel, an openSUSE Tumbleweed user reported package installations
and upgrades, with the zypper tool, were often taking a long time to
complete, much more than usual. With strace it could be observed that
zypper was spending over 99% of its time on rename operations, and then
with further analysis we checked that directory logging was happening
too frequently and causing high latencies for the rename operations.
Taking into account that installation/upgrade of some of these packages
needed about a few thousand file renames, the slowdown was very noticeable
for the user.
The issue was caused indirectly due to an excessive number of inode
evictions on a 5.15 kernel, about 100x more compared to a 5.13, 5.14
or a 5.16-rc8 kernel. After an inode eviction we can't tell for sure,
in an efficient way, if an inode was previously logged in the current
transaction, so we are pessimistic and assume it was, because in case
it was we need to update the logged inode. More details on that in one
of the patches in the same series (subject "btrfs: avoid inode logging
during rename and link when possible"). Either way, in case the parent
directory was logged before, we currently do more work then necessary
during a rename, and this change minimizes that amount of work.
The following script mimics part of what a package installation/upgrade
with zypper does, which is basically renaming a lot of files, in some
directory under /usr, to a name with a suffix of "-RPMDELETE":
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=10000
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
# Do some change to testdir and fsync it.
echo -n > $MNT/testdir/file_$((NUM_FILES + 1))
xfs_io -c "fsync" $MNT/testdir
echo "Renaming $NUM_FILES files..."
start=$(date +%s%N)
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE
done
end=$(date +%s%N)
Filipe Manana [Thu, 20 Jan 2022 11:00:07 +0000 (11:00 +0000)]
btrfs: pass the dentry to btrfs_log_new_name() instead of the inode
In the next patch in the series, there will be the need to access the old
name, and its length, of an inode when logging the inode during a rename.
So instead of passing the inode to btrfs_log_new_name() pass the dentry,
because from the dentry we can get the inode, the name and its length.
This will avoid passing 3 new parameters to btrfs_log_new_name() in the
next patch - the name, its length and an index number. This way we end
up passing only 1 new parameter, the index number.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 20 Jan 2022 11:00:06 +0000 (11:00 +0000)]
btrfs: add helper to delete a dir entry from a log tree
Move the code that finds and deletes a logged dir entry out of
btrfs_del_dir_entries_in_log() into a helper function. This new helper
function will be used by another patch in the same series, and serves
to avoid having duplicated logic.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 13 Jan 2022 15:16:18 +0000 (17:16 +0200)]
btrfs: move QUOTA_ENABLED check to rescan_should_stop from btrfs_qgroup_rescan_worker
Instead of having 2 places that short circuit the qgroup leaf scan have
everything in the qgroup_rescan_leaf function. In addition to that, also
ensure that the inconsistent qgroup flag is set when rescan_should_stop
returns true. This both retains the old behavior when -EINTR was set in
the body of the loop and at the same time also extends this behavior
when scanning is interrupted due to remount or unmount operations.
Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 12 Jan 2022 05:06:02 +0000 (13:06 +0800)]
btrfs: use dev_t to match device in device_matched
Commit "btrfs: add device major-minor info in the struct btrfs_device"
saved the device major-minor number in the struct btrfs_device upon
discovering it.
So no need to lookup_bdev() again just match, which means
device_matched() can go away.
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 12 Jan 2022 05:06:01 +0000 (13:06 +0800)]
btrfs: add device major-minor info in the struct btrfs_device
Internally it is common to use the major-minor number to identify a
device and, at a few locations in btrfs, we use the major-minor number
to match the device.
So when we identify a new btrfs device through device add or device
replace or device-scan/ready save the device's major-minor (dev_t) in the
struct btrfs_device so that we don't have to call lookup_bdev() again.
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 12 Jan 2022 05:06:00 +0000 (13:06 +0800)]
btrfs: match stale devices by dev_t
After the commit "btrfs: harden identification of the stale device", we
don't have to match the device path anymore. Instead, we match the dev_t.
So pass in the dev_t instead of the device path, in the call chain
btrfs_forget_devices()->btrfs_free_stale_devices().
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 12 Jan 2022 05:05:59 +0000 (13:05 +0800)]
btrfs: harden identification of a stale device
Identifying and removing the stale device from the fs_uuids list is done
by btrfs_free_stale_devices(). btrfs_free_stale_devices() in turn
depends on device_path_matched() to check if the device appears in more
than one btrfs_device structure.
The matching of the device happens by its path, the device path. However,
when device mapper is in use, the dm device paths are nothing but a link
to the actual block device, which leads to the device_path_matched()
failing to match.
Fix this by matching the dev_t as provided by lookup_bdev() instead of
plain string compare of the device paths.
Reported-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 11 Jan 2022 16:00:26 +0000 (18:00 +0200)]
btrfs: move missing device handling in a dedicate function
This simplifies the code flow in read_one_chunk and makes error handling
when handling missing devices a bit simpler by reducing it to a single
check if something went wrong. No functional changes.
Reviewed-by: Su Yue <l@damenly.su> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
projects / kernel.git / log