Linus Torvalds [Sun, 16 Oct 2022 18:12:22 +0000 (11:12 -0700)]
Merge tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
Linus Torvalds [Sun, 16 Oct 2022 18:08:19 +0000 (11:08 -0700)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
Linus Torvalds [Sun, 16 Oct 2022 18:01:40 +0000 (11:01 -0700)]
Merge tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- fix a regression in guest mounts to old servers
- improvements to directory leasing (caching directory entries safely
beyond the root directory)
- symlink improvement (reducing roundtrips needed to process symlinks)
- an lseek fix (to problem where some dir entries could be skipped)
- improved ioctl for returning more detailed information on directory
change notifications
- clarify multichannel interface query warning
- cleanup fix (for better aligning buffers using ALIGN and round_up)
- a compounding fix
- fix some uninitialized variable bugs found by Coverity and the kernel
test robot
* tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve SMB3 change notification support
cifs: lease key is uninitialized in two additional functions when smb1
cifs: lease key is uninitialized in smb1 paths
smb3: must initialize two ACL struct fields to zero
cifs: fix double-fault crash during ntlmssp
cifs: fix static checker warning
cifs: use ALIGN() and round_up() macros
cifs: find and use the dentry for cached non-root directories also
cifs: enable caching of directories for which a lease is held
cifs: prevent copying past input buffer boundaries
cifs: fix uninitialised var in smb2_compound_op()
cifs: improve symlink handling for smb2+
smb3: clarify multichannel warning
cifs: fix regression in very old smb1 mounts
cifs: fix skipping to incorrect offset in emit_cached_dirents
Tetsuo Handa [Sat, 15 Oct 2022 15:53:51 +0000 (00:53 +0900)]
Revert "cpumask: fix checking valid cpu range".
This reverts commit b55d5df4cb41 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit b55d5df4cb41 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Masahiro Yamada [Fri, 14 Oct 2022 20:18:11 +0000 (05:18 +0900)]
kbuild: fix single directory build
Commit a9d3bdc81687 ("kbuild: refactor single builds of *.ko") was wrong.
KBUILD_MODULES _is_ needed for single builds.
Otherwise, "make foo/bar/baz/" does not build module objects at all.
Fixes: a9d3bdc81687 ("kbuild: refactor single builds of *.ko") Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sun, 16 Oct 2022 00:05:07 +0000 (17:05 -0700)]
Merge tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab hotfix from Vlastimil Babka:
"A single fix for the common-kmalloc series, for warnings on mips and
sparc64 reported by Guenter Roeck"
* tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
Linus Torvalds [Sat, 15 Oct 2022 23:47:33 +0000 (16:47 -0700)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"I have relocated to London so not much work from me while I get
settled.
Still, OpenRISC picked up two patches in this window:
- Fix for kernel page table walking from Jann Horn
- MAINTAINER entry cleanup from Palmer Dabbelt"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: git://github -> https://github.com for openrisc
openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
Linus Torvalds [Sat, 15 Oct 2022 23:36:38 +0000 (16:36 -0700)]
Merge tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert the attempt to distribute spare resources to unconfigured
hotplug bridges at boot time.
This fixed some dock hot-add scenarios, but Jonathan Cameron reported
that it broke a topology with a multi-function device where one
function was a Switch Upstream Port and the other was an Endpoint"
* tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Distribute available resources for root buses, too"
Hyeonggon Yoo [Sat, 15 Oct 2022 04:34:29 +0000 (13:34 +0900)]
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
After commit 710bdf2b63c5 ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.
SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.
Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.
Steve French [Sat, 15 Oct 2022 05:43:22 +0000 (00:43 -0500)]
smb3: improve SMB3 change notification support
Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.
This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.
To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)
Steve French [Sat, 15 Oct 2022 01:00:32 +0000 (20:00 -0500)]
cifs: lease key is uninitialized in two additional functions when smb1
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized
in smb1 mounts. It is cleaner to set lease key to zero in these
places where leases are not supported (smb1 can not return lease keys
so the field was uninitialized).
Addresses-Coverity: 1514207 ("Uninitialized scalar variable")
Addresses-Coverity: 1514331 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Sat, 15 Oct 2022 00:18:32 +0000 (19:18 -0500)]
cifs: lease key is uninitialized in smb1 paths
It is cleaner to set lease key to zero in the places where leases are not
supported (smb1 can not return lease keys so the field was uninitialized).
Addresses-Coverity: 1513994 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Fri, 14 Oct 2022 20:14:54 +0000 (17:14 -0300)]
cifs: fix double-fault crash during ntlmssp
The crash occurred because we were calling memzero_explicit() on an
already freed sess_data::iov[1] (ntlmsspblob) in sess_free_buffer().
Fix this by not calling memzero_explicit() on sess_data::iov[1] as
it's already by handled by callers.
Fixes: 51865fc04b82 ("cifs: replace kfree() with kfree_sensitive() for sensitive data") Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sat, 15 Oct 2022 01:41:41 +0000 (18:41 -0700)]
Merge tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Dan Williams:
"Some small cleanups and fixes in and around the nvdimm subsystem. The
most significant change is a regression fix for nvdimm namespace
(volume) creation when the namespace size is smaller than 2MB/
Summary:
- Fix nvdimm namespace creation on platforms that do not publish
associated 'DIMM' metadata for a persistent memory region.
- Miscellaneous fixes and cleanups"
* tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: HMAT: Release platform device in case of platform_device_add_data() fails
dax: Remove usage of the deprecated ida_simple_xxx API
libnvdimm/region: Allow setting align attribute on regions without mappings
nvdimm/namespace: Fix comment typo
nvdimm: make __nvdimm_security_overwrite_query static
nvdimm/region: Fix kernel-doc
nvdimm/namespace: drop unneeded temporary variable in size_store()
nvdimm/namespace: return uuid_null only once in nd_dev_to_uuid()
Linus Torvalds [Sat, 15 Oct 2022 01:36:42 +0000 (18:36 -0700)]
Merge tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A great rework of the isl12022 driver makes up the bulk of the
changes. There is also an important fix for CMOS and then the usual
small fixes:
- switch to devm_clk_get_enabled() where relevant
- cmos: event handler registration fix
- isl12022: code improvements"
* tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rv3028: Fix codestyle errors
rtc: cmos: Fix event handler registration ordering issue
rtc: k3: Use devm_clk_get_enabled() helper
rtc: jz4740: Use devm_clk_get_enabled() helper
rtc: mpfs: Use devm_clk_get_enabled() helper
rtc: ds1685: Fix spelling of function name in comment block
rtc: isl12022: switch to using regmap API
rtc: isl12022: drop redundant write to HR register
rtc: isl12022: use dev_set_drvdata() instead of i2c_set_clientdata()
rtc: isl12022: use %ptR
rtc: isl12022: simplify some expressions
rtc: isl12022: drop a dev_info()
rtc: isl12022: specify range_min and range_max
rtc: isl12022: stop using deprecated devm_rtc_device_register()
rtc: stmp3xxx: Add failure handling for stmp3xxx_wdt_register()
rtc: mxc: Use devm_clk_get_enabled() helper
rtc: gamecube: Always reset HW_SRNPROT after read
rtc: k3: detect SoC to determine erratum fix
rtc: k3: wait until the unlock field is not zero
rtc: mpfs: Remove printing of stray CR
Linus Torvalds [Sat, 15 Oct 2022 01:31:28 +0000 (18:31 -0700)]
Merge tag 'i3c/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Not much this cycle, only two fixes for a rare event"
- fix device reattach issues"
* tag 'i3c/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Remove the wrong place of reattach.
i3c: master: Free the old_dyn_addr when reattach.
Linus Torvalds [Sat, 15 Oct 2022 01:23:23 +0000 (18:23 -0700)]
Merge tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Use bitmap API to allocate bitmaps
- New attach mode, disable_fm, to attach without fastmap
- Fixes for various typos in comments
UBIFS:
- Fix for a deadlock when setting xattrs for encrypted file
- Fix for an assertion failures when truncating encrypted files
- Fixes for various typos in comments"
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: fastmap: Add fastmap control support for 'UBI_IOCATT' ioctl
ubi: fastmap: Use the bitmap API to allocate bitmaps
ubifs: Fix AA deadlock when setting xattr for encrypted file
ubifs: Fix UBIFS ro fail due to truncate in the encrypted directory
mtd: ubi: drop unexpected word 'a' in comments
ubi: block: Fix typos in comments
ubi: fastmap: Fix typo in comments
ubi: Fix repeated words in comments
ubi: ubi-media.h: Fix comment typo
ubi: block: Remove in vain semicolon
ubifs: Fix ubifs_check_dir_empty() kernel-doc comment
Linus Torvalds [Sat, 15 Oct 2022 01:14:48 +0000 (18:14 -0700)]
Merge tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Move to strscpy()
- Improve panic notifiers
- Fix NR_CPUS usage
- Fixes for various comments
- Fixes for virtio driver
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
uml: Remove the initialization of statics to 0
um: Do not initialise statics to 0.
um: Fix comment typo
um: Improve panic notifiers consistency and ordering
um: remove unused reactivate_chan() declaration
um: mmaper: add __exit annotations to module exit funcs
um: virt-pci: add __init/__exit annotations to module init/exit funcs
hostfs: move from strlcpy with unused retval to strscpy
um: move from strlcpy with unused retval to strscpy
um: increase default virtual physical memory to 64 MiB
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
um: read multiple msg from virtio slave request fd
Linus Torvalds [Fri, 14 Oct 2022 20:47:42 +0000 (13:47 -0700)]
Merge tag 'asm-generic-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"A last-minute arch/alpha regression fix: the previous asm-generic
branch contained a new regression from a typo"
* tag 'asm-generic-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
alpha: fix marvel_ioread8 build regression
Linus Torvalds [Fri, 14 Oct 2022 20:44:53 +0000 (13:44 -0700)]
Merge tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are three fixes for build warnings that came in during the merge
window"
* tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: mmp: Make some symbols static
ARM: spear6xx: Staticize few definitions
clk: spear: Move prototype to accessible header
Stephen Boyd [Fri, 14 Oct 2022 20:44:44 +0000 (13:44 -0700)]
Merge branch 'clk-rate-range' into clk-next
- Various clk rate range fixes
- Drop clk rate range constraints on clk_put() (redux)
* clk-rate-range: (28 commits)
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
clk: tests: Add some tests for orphan with multiple parents
clk: tests: Add tests for mux with multiple parents
clk: tests: Add tests for single parent mux
...
Jon Hunter [Mon, 10 Oct 2022 10:00:46 +0000 (11:00 +0100)]
clk: tegra: Fix Tegra PWM parent clock
Commit efa4a7e19dd5 ("pwm: tegra: Optimize period calculation") updated
the period calculation in the Tegra PWM driver and now returns an error
if the period requested is less than minimum period supported. This is
breaking PWM support on various Tegra platforms. For example, on the
Tegra210 Jetson Nano platform this is breaking the PWM fan support and
probing the PWM fan driver now fails ...
pwm-fan pwm-fan: Failed to configure PWM: -22
pwm-fan: probe of pwm-fan failed with error -22
The problem is that the default parent clock for the PWM on Tegra210 is
a 32kHz clock and is unable to support the requested PWM period.
Fix PWM support on Tegra20, Tegra30, Tegra114, Tegra124 and Tegra210 by
updating the parent clock for the PWM to be the PLL_P.
Fixes: efa4a7e19dd5 ("pwm: tegra: Optimize period calculation") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Robert Eckelmann <longnoserob@gmail.com> # TF101 T20 Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # TF101 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # TF201 T30 Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # TF700T T3 Link: https://lore.kernel.org/r/20221010100046.6477-1-jonathanh@nvidia.com Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Linus Walleij [Thu, 13 Oct 2022 14:07:45 +0000 (16:07 +0200)]
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
These two clocks are now registered in the device tree as fixed clocks,
causing a regression in the driver as the clock already exists with
e.g. the name "pxo_board" as the MSM8660 GCC driver probes.
Fix this by just not hard-coding this anymore and everything works
like a charm.
Since commit 3c0c969b9c03 ("clk: Stop forwarding clk_rate_requests
to the parent"), the clk_rate_request is .. as the title says, not
forwarded anymore to the parent: this produces an issue with the
MediaTek clock MUX driver during GPU DVFS on MT8195, but not on
MT8192 or others.
This is because, differently from others, like MT8192 where all of
the clocks in the MFG parents tree are of mtk_mux type, but in the
parent tree of MT8195's MFG clock, we have one mtk_mux clock and
one (clk framework generic) mux clock, like so:
To solve this issue and also keep the GPU DVFS clocks code working
as expected, wire up a .determine_rate() callback for the mtk_mux
ops; for that, the standard clk_mux_determine_rate_flags() was used
as it was possible to.
This commit was successfully tested on MT6795 Xperia M5, MT8173 Elm,
MT8192 Spherion and MT8195 Tomato; no regressions were seen.
For the sake of some more documentation about this issue here's the
trace of it:
The rule for generating human readable LLVM IR (.ll) is only useful as a
debugging feature:
$ make LLVM=1 fs/select.ll
As Fangrui notes:
A LLVM_ENABLE_ASSERTIONS=off build of Clang defaults to
-fdiscard-value-names.
A LLVM_ENABLE_ASSERTIONS=on build of Clang defaults to
-fno-discard-value-names.
Explicitly enable -fno-discard-value-names so that the IR always contains
value names regardless of whether assertions were enabled or not.
Assertions generally are not enabled in releases of clang packaged by
distributions.
Link: https://github.com/ClangBuiltLinux/linux/issues/1467 Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Fri, 14 Oct 2022 20:22:14 +0000 (13:22 -0700)]
Merge tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a few remaining patches for 6.1-rc1.
The major changes are the hibernation fixes for HD-audio CS35L41 codec
and the USB-audio small fixes against the last change. In addition, a
couple of HD-audio regression fixes and a couple of potential
mutex-deadlock fixes with OSS emulation in ALSA core side are seen"
* tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: cs35l41: Support System Suspend
ALSA: hda: cs35l41: Remove suspend/resume hda hooks
ALSA: hda/cs_dsp_ctl: Fix mutex inversion when creating controls
ALSA: hda: hda_cs_dsp_ctl: Ensure pwr_lock is held before reading/writing controls
ALSA: hda: hda_cs_dsp_ctl: Minor clean and redundant code removal
ALSA: oss: Fix potential deadlock at unregistration
ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
ALSA: hda/realtek: Add Intel Reference SSID to support headset keys
ALSA: hda/realtek: Add quirk for ASUS GV601R laptop
ALSA: hda/realtek: Correct pin configs for ASUS G533Z
ALSA: usb-audio: Avoid superfluous endpoint setup
ALSA: usb-audio: Correct the return code from snd_usb_endpoint_set_params()
ALSA: usb-audio: Apply mutex around snd_usb_endpoint_set_params()
ALSA: usb-audio: Avoid unnecessary interface change at EP close
ALSA: hda: Update register polling macros
ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530
Linus Torvalds [Fri, 14 Oct 2022 19:38:03 +0000 (12:38 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Cortex-A55 errata workaround (repeat TLBI)
- AMPERE1 added to the Spectre-BHB affected list
- MTE fix to avoid setting PG_mte_tagged if no tags have been touched
on a page
- Fixed typo in the SCTLR_EL1.SPINTMASK bit naming (the commit log has
other typos)
- perf: return value check in ali_drw_pmu_probe(),
ALIBABA_UNCORE_DRW_PMU dependency on ACPI
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add AMPERE1 to the Spectre-BHB affected list
arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored
MAINTAINERS: rectify file entry in ALIBABA PMU DRIVER
drivers/perf: ALIBABA_UNCORE_DRW_PMU should depend on ACPI
drivers/perf: fix return value check in ali_drw_pmu_probe()
arm64: errata: Add Cortex-A55 to the repeat tlbi list
arm64/sysreg: Fix typo in SCTR_EL1.SPINTMASK
Linus Torvalds [Fri, 14 Oct 2022 19:28:43 +0000 (12:28 -0700)]
Merge tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- fix a race which causes page refcounting errors in ZONE_DEVICE pages
(Alistair Popple)
- fix userfaultfd test harness instability (Peter Xu)
- various other patches in MM, mainly fixes
* tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits)
highmem: fix kmap_to_page() for kmap_local_page() addresses
mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page
mm/selftest: uffd: explain the write missing fault check
mm/hugetlb: use hugetlb_pte_stable in migration race check
mm/hugetlb: fix race condition of uffd missing/minor handling
zram: always expose rw_page
LoongArch: update local TLB if PTE entry exists
mm: use update_mmu_tlb() on the second thread
kasan: fix array-bounds warnings in tests
hmm-tests: add test for migrate_device_range()
nouveau/dmem: evict device private memory during release
nouveau/dmem: refactor nouveau_dmem_fault_copy_one()
mm/migrate_device.c: add migrate_device_range()
mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()
mm/memremap.c: take a pgmap reference on page allocation
mm: free device private pages have zero refcount
mm/memory.c: fix race when faulting a device private page
mm/damon: use damon_sz_region() in appropriate place
mm/damon: move sz_damon_region to damon_sz_region
lib/test_meminit: add checks for the allocation functions
...
Jonathan reported that this commit broke this topology, where all the space
available on bus 02 was assigned to the 02:00.0 bridge window, leaving none
for the e1000 device at 02:00.1:
pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04]
pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04]
pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000]
e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]
Linus Torvalds [Fri, 14 Oct 2022 19:10:01 +0000 (12:10 -0700)]
Merge tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Fixes:
- When we added basic vDSO support in kernel 5.18 we introduced a bug
which prevented a mmap() of graphic card memory. This is because we
used the DMB (data memory break trap bit) page flag as special-bit,
but missed to clear that bit when loading the TLB.
- Graphics card memory size was not correctly aligned
- Spelling fixes (from Colin Ian King)
Enhancements:
- PDC console (which uses firmware calls) now rewritten as early
console
- Reduced size of alternative tables"
* tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver
parisc: Fix userspace graphics card breakage due to pgtable special bit
parisc: fbdev/stifb: Align graphics memory size to 4MB
parisc: Convert PDC console to an early console
parisc: Reduce kernel size by packing alternative tables
Linus Torvalds [Fri, 14 Oct 2022 18:36:05 +0000 (11:36 -0700)]
Merge tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Generate a change uevent on unsolicited device end I/O interrupt for
z/VM unit record devices supported by the vmur driver. This event can
be used to automatically trigger processing of files as they arrive
in the z/VM reader.
* tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vmur: generate uevent on unsolicited device end
s390/vmur: remove unnecessary BUG statement
Linus Torvalds [Fri, 14 Oct 2022 18:21:11 +0000 (11:21 -0700)]
Merge tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- DT updates for the PolarFire SOC
- a fix to correct the handling of write-only mappings
- m{vetndor,arcd,imp}id is now in /proc/cpuinfo
- the SiFive L2 cache controller support has been refactored to also
support L3 caches
- misc fixes, cleanups and improvements throughout the tree
* tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
MAINTAINERS: add RISC-V's patchwork
RISC-V: Make port I/O string accessors actually work
riscv: enable software resend of irqs
RISC-V: Re-enable counter access from userspace
riscv: vdso: fix NULL deference in vdso_join_timens() when vfork
riscv: Add cache information in AUX vector
soc: sifive: ccache: define the macro for the register shifts
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
soc: sifive: ccache: reduce printing on init
soc: sifive: ccache: determine the cache level from dts
soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.
dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache
riscv: check for kernel config option in t-head memory types errata
riscv: use BIT() marco for cpufeature probing
riscv: use BIT() macros in t-head errata init
riscv: drop some idefs from CMO initialization
riscv: cleanup svpbmt cpufeature probing
riscv: Pass -mno-relax only on lld < 15.0.0
RISC-V: Avoid dereferening NULL regs in die()
dt-bindings: riscv: add new riscv,isa strings for emulators
...
Linus Torvalds [Fri, 14 Oct 2022 18:16:18 +0000 (11:16 -0700)]
Merge tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix 32-bit syscall wrappers with 64-bit arguments of unaligned
register-pairs. Notably this broke ftruncate64 & pread/write64, which
can lead to file corruption.
- Fix lost interrupts when returning to soft-masked context on 64-bit.
- Fix build failure when CONFIG_DTL=n.
Thanks to Nicholas Piggin, Jason A. Donenfeld, Guenter Roeck, Arnd
Bergmann, and Sachin Sant.
* tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix CONFIG_DTL=n build
powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context
powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs
drm/amd/display: Fix build breakage with CONFIG_DEBUG_FS=n
After commit ea6e492882d2 ("drm/amd/display: Fix vblank refcount in vrr
transition"), a build with CONFIG_DEBUG_FS=n is broken due to a
misplaced brace, along the lines of:
In file included from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_trace.h:39,
from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:41:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: At top level:
./include/drm/drm_atomic.h:864:9: error: expected identifier or ‘(’ before ‘for’
864 | for ((__i) = 0; \
| ^~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8317:9: note: in expansion of macro ‘for_each_new_crtc_in_state’
8317 | for_each_new_crtc_in_state(state, crtc, new_crtc_state, j)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Move the brace within the #ifdef so that the file can be built with or
without CONFIG_DEBUG_FS.
Paulo Alcantara [Fri, 14 Oct 2022 16:40:42 +0000 (13:40 -0300)]
cifs: fix static checker warning
Remove unnecessary NULL check of oparam->cifs_sb when parsing symlink
error response as it's already set by all smb2_open_file() callers and
deferenced earlier.
This fixes below report:
fs/cifs/smb2file.c:126 smb2_open_file()
warn: variable dereferenced before check 'oparms->cifs_sb' (see line 112)
Link: https://lore.kernel.org/r/Y0kt42j2tdpYakRu@kili Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
scripts/clang-tools: Convert clang-tidy args to list
Convert list of clang-tidy arguments to a list for ease of adding to
them and extending them as required.
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Richard Acayan [Tue, 11 Oct 2022 01:38:28 +0000 (21:38 -0400)]
modpost: put modpost options before argument
The musl implementation of getopt stops looking for options after the
first non-option argument. Put the options before the non-option
argument so environments using musl can still build the kernel and
modules.
Helge Deller [Fri, 14 Oct 2022 08:18:53 +0000 (10:18 +0200)]
parisc: Fix userspace graphics card breakage due to pgtable special bit
Commit 6ddaf4f58ce1 ("parisc: Add vDSO support") introduced the vDSO
support, for which a _PAGE_SPECIAL page table flag was needed. Since we
wanted to keep every page table entry in 32-bits, this patch re-used the
existing - but yet unused - _PAGE_DMB flag (which triggers a hardware break
if a page is accessed) to store the special bit.
But when graphics card memory is mmapped into userspace, the kernel uses
vm_iomap_memory() which sets the the special flag. So, with the DMB bit
set, every access to the graphics memory now triggered a hardware
exception and segfaulted the userspace program.
Fix this breakage by dropping the DMB bit when writing the page
protection bits to the CPU TLB.
In addition this patch adds a small optimization: if huge pages aren't
configured (which is at least the case for 32-bit kernels), then the
special bit is stored in the hpage (HUGE PAGE) bit instead. That way we
can skip to reset the DMB bit.
Helge Deller [Fri, 14 Oct 2022 08:13:55 +0000 (10:13 +0200)]
parisc: fbdev/stifb: Align graphics memory size to 4MB
Independend of the current graphics resolution, adjust the reported
graphics card memory size to the next 4MB boundary.
This fixes the fbtest program which expects a naturally aligned size.
Linus Torvalds [Fri, 14 Oct 2022 04:56:34 +0000 (21:56 -0700)]
Merge tag 'drm-next-2022-10-14' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"Round of fixes for the merge window stuff, bunch of amdgpu and i915
changes, this should have the gcc11 warning fix, amongst other
changes.
amdgpu:
- DC mutex fix
- DC SubVP fixes
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- SDMA 6.x fixes
- Enable DPIA for 3.1.4
- VRR fixes
- VRAM BO swapping fix
- Revert dirty fb helper change
- SR-IOV suspend/resume fixes
- Work around GCC array bounds check fail warning
- UMC 8.10 fixes
- Misc fixes and cleanups
i915:
- Round to closest in g4x+ HDMI clock readout
- Update MOCS table for EHL
- Fix PSR_IMR/IIR field handling
- Fix watermark calculations for gen12+/DG2 modifiers
- Reject excessive dotclocks early
- Fix revocation of non-persistent contexts
- Handle migration for dpt
- Fix display problems after resume
- Allow control over the flags when migrating
- Consider DG2_RC_CCS_CC when migrating buffers"
* tag 'drm-next-2022-10-14' of git://anongit.freedesktop.org/drm/drm: (110 commits)
drm/amd/display: Add HUBP surface flip interrupt handler
drm/i915/display: consider DG2_RC_CCS_CC when migrating buffers
drm/i915: allow control over the flags when migrating
drm/amd/display: Simplify bool conversion
drm/amd/display: fix transfer function passed to build_coefficients()
drm/amd/display: add a license to cursor_reg_cache.h
drm/amd/display: make virtual_disable_link_output static
drm/amd/display: fix indentation in dc.c
drm/amd/display: make dcn32_split_stream_for_mpc_or_odm static
drm/amd/display: fix build error on arm64
drm/amd/display: 3.2.207
drm/amd/display: Clean some DCN32 macros
drm/amdgpu: Add poison mode query for umc v8_10_0
drm/amdgpu: Update umc v8_10_0 headers
drm/amdgpu: fix coding style issue for mca notifier
drm/amdgpu: define convert_error_address for umc v8.7
drm/amdgpu: define RAS convert_error_address API
drm/amdgpu: remove check for CE in RAS error address query
drm/i915: Fix display problems after resume
drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() [take 2]
...
Linus Torvalds [Fri, 14 Oct 2022 04:25:57 +0000 (21:25 -0700)]
Merge tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
"Fixes that ended up landing later than the initial block pull request.
Nothing really major in here:
- NVMe pull request via Christoph:
- add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit)
- add NVME_QUIRK_NO_DEEPEST_PS to avoid the deepest sleep state
on ZHITAI TiPro5000 SSDs (Xi Ruoyao)
- fix possible hang caused during ctrl deletion (Sagi Grimberg)
- fix possible hang in live ns resize with ANA access (Sagi
Grimberg)
- Proactively avoid a sign extension issue with the queue flags
(Brian)
- Regression fix for hidden disks (Christoph)
- Update OPAL maintainers entry (Jonathan)
- blk-wbt regression initialization fix (Yu)"
* tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux:
nvme-multipath: fix possible hang in live ns resize with ANA access
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760
nvme-tcp: fix possible hang caused during ctrl deletion
nvme-rdma: fix possible hang caused during ctrl deletion
block: fix leaking minors of hidden disks
block: avoid sign extend problem with default queue flags mask
blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
block: Remove the repeat word 'can'
MAINTAINERS: Update SED-Opal Maintainers
Linus Torvalds [Fri, 14 Oct 2022 04:15:30 +0000 (21:15 -0700)]
Merge tag 'io_uring-6.1-2022-10-13' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"A collection of fixes that ended up either being later than the
initial pull, or dependent on multiple branches (6.0-late being one of
them) and hence deferred purposely. This contains:
- Cleanup fixes for the single submitter late 6.0 change, which we
pushed to 6.1 to keep the 6.0 changes small (Dylan, Pavel)
- Fix for IORING_OP_CONNECT not handling -EINPROGRESS correctly (me)
- Ensure that the zc sendmsg variant gets audited correctly (me)
- Regression fix from this merge window where kiocb_end_write()
doesn't always gets called, which can cause issues with fs freezing
(me)
- Registered files SCM handling fix (Pavel)
- Regression fix for big sqe dumping in fdinfo (Pavel)
- Registered buffers accounting fix (Pavel)
- Remove leftover notification structures, we killed them off late in
6.0 (Pavel)
- Minor optimizations (Pavel)
- Cosmetic variable shadowing fix (Stefan)"
* tag 'io_uring-6.1-2022-10-13' of git://git.kernel.dk/linux:
io_uring/rw: ensure kiocb_end_write() is always called
io_uring: fix fdinfo sqe offsets calculation
io_uring: local variable rw shadows outer variable in io_write
io_uring/opdef: remove 'audit_skip' from SENDMSG_ZC
io_uring: optimise locking for local tw with submit_wait
io_uring: remove redundant memory barrier in io_req_local_work_add
io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT
io_uring: remove notif leftovers
io_uring: correct pinned_vm accounting
io_uring/af_unix: defer registered files gc to io_uring release
io_uring: limit registration w/ SINGLE_ISSUER
io_uring: remove io_register_submitter
io_uring: simplify __io_uring_add_tctx_node
Conor Dooley [Tue, 11 Oct 2022 16:07:45 +0000 (17:07 +0100)]
MAINTAINERS: add RISC-V's patchwork
The RISC-V patchwork instance on kernel.org has had some necromancy
performed on it & will be used going forward. The statuses that are
intended to be used are:
- New: No action has been taken yet
- Under Review: The maintainer is waiting for review comments from others
- Changes Requested: Either the maintainer or a reviewer requested
changes in the patch. The patch author is expected to submit a new
version
- Superseded: There's a new version of the patch available
- Not Applicable: The patch is not intended for the RISC-V tree
- Accepted: The patch has been applied
- Rejected: The patch has been rejected, with reasons stated in an
email
Ke Sun [Sat, 8 Oct 2022 07:13:21 +0000 (15:13 +0800)]
rtc: rv3028: Fix codestyle errors
Compiler warnings：
drivers/rtc/rtc-rv3028.c: In function 'rv3028_param_set':
drivers/rtc/rtc-rv3028.c:559:20: warning: statement will never be executed [-Wswitch-unreachable]
559 | u8 mode;
| ^~~~
drivers/rtc/rtc-rv3028.c: In function 'rv3028_param_get':
drivers/rtc/rtc-rv3028.c:526:21: warning: statement will never be executed [-Wswitch-unreachable]
526 | u32 value;
| ^~~~~
Fix it by moving the variable declaration to the beginning of the function.
Because acpi_install_fixed_event_handler() enables the event
automatically on success, it is incorrect to call it before the
handler routine passed to it is ready to handle events.
Unfortunately, the rtc-cmos driver does exactly the incorrect thing
by calling cmos_wake_setup(), which passes rtc_handler() to
acpi_install_fixed_event_handler(), before cmos_do_probe(), because
rtc_handler() uses dev_get_drvdata() to get to the cmos object
pointer and the driver data pointer is only populated in
cmos_do_probe().
This leads to a NULL pointer dereference in rtc_handler() on boot
if the RTC fixed event happens to be active at the init time.
To address this issue, change the initialization ordering of the
driver so that cmos_wake_setup() is always called after a successful
cmos_do_probe() call.
While at it, change cmos_pnp_probe() to call cmos_do_probe() after
the initial if () statement used for computing the IRQ argument to
be passed to cmos_do_probe() which is cleaner than calling it in
each branch of that if () (local variable "irq" can be of type int,
because it is passed to that function as an argument of type int).
Note that commit 1d54461aea1e ("rtc: rtc-cmos: Do not check
ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number
of systems, because previously it only affected systems with
ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that
commit.
Fixes: 1d54461aea1e ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") Fixes: 84576b61799b ("rtc-cmos: move wake setup from ACPI glue into RTC driver") Link: https://lore.kernel.org/linux-acpi/20221010141630.zfzi7mk7zvnmclzy@techsingularity.net/ Reported-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/5629262.DvuYhMxLoT@kreacher Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RISC-V: Make port I/O string accessors actually work
Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:
PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros. Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion. No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: f44d29dc0a355 ("RISC-V: Atomic and Locking Code") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Palmer Dabbelt [Thu, 13 Oct 2022 19:49:12 +0000 (12:49 -0700)]
RISC-V: Make mmap() with PROT_WRITE imply PROT_READ
Commit 106b53788afb ("riscv: mmap with PROT_WRITE but no PROT_READ is
invalid") made mmap() reject mappings with only PROT_WRITE set in an
attempt to fix an observed inconsistency in behavior when attempting
to read from a PROT_WRITE-only mapping. The root cause of this behavior
was actually that while RISC-V's protection_map maps VM_WRITE to
readable PTE permissions (since write-only PTEs are considered reserved
by the privileged spec), the page fault handler considered loads from
VM_WRITE-only VMAs illegal accesses. Fix the underlying cause by
handling faults in VM_WRITE-only VMAs (patch 1) and then re-enable
use of mmap(PROT_WRITE) (patch 2), making RISC-V's behavior consistent
with all other architectures that don't support write-only PTEs.
Linus Torvalds [Thu, 13 Oct 2022 19:22:42 +0000 (12:22 -0700)]
Merge tag 'devicetree-fixes-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fixes for Mediatek MT6370 binding
- Merge the DT overlay maintainer entry to the main entry as Pantelis
is not active and Frank is taking a step back
* tag 'devicetree-fixes-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
MAINTAINERS: of: collapse overlay entry into main device tree entry
dt-bindings: mfd: mt6370: fix the interrupt order of the charger in the example
dt-bindings: leds: mt6370: Fix MT6370 LED indicator DT warning
The PLIC specification does not describe the interrupt pendings bits as
read-write, only that they "can be read". To allow for retriggering of
interrupts (and the use of the irq debugfs interface) enable
HARDIRQS_SW_RESEND for RISC-V.
This is because the mm->context.vdso_info is NULL in vfork case. From
another side, mm->context.vdso_info either points to vdso info
for RV64 or vdso info for compat, there's no need to bloat riscv's
mm_context_t, we can handle the difference when setup the additional
page for vdso.
Palmer Dabbelt [Thu, 13 Oct 2022 18:06:57 +0000 (11:06 -0700)]
Merge patch series "Use composable cache instead of L2 cache"
Zong Li <zong.li@sifive.com> says:
Since composable cache may be L3 cache if private L2 cache exists, we
should use its original name "composable cache" to prevent confusion.
This patchset contains the modification which is related to ccache, such
as DT binding and EDAC driver.
* b4-shazam-merge:
riscv: Add cache information in AUX vector
soc: sifive: ccache: define the macro for the register shifts
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
soc: sifive: ccache: reduce printing on init
soc: sifive: ccache: determine the cache level from dts
soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.
dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache
Greentime Hu [Tue, 13 Sep 2022 06:18:17 +0000 (06:18 +0000)]
riscv: Add cache information in AUX vector
There are no standard CSR registers to provide cache information, the
way for RISC-V is to get this information from DT. sysconf syscall
could use them to get information of cache through AUX vector.
The result of 'getconf -a|grep -i cache' as follows:
LEVEL1_ICACHE_SIZE 32768
LEVEL1_ICACHE_ASSOC 2
LEVEL1_ICACHE_LINESIZE 64
LEVEL1_DCACHE_SIZE 32768
LEVEL1_DCACHE_ASSOC 4
LEVEL1_DCACHE_LINESIZE 64
LEVEL2_CACHE_SIZE 524288
LEVEL2_CACHE_ASSOC 8
LEVEL2_CACHE_LINESIZE 64
LEVEL3_CACHE_SIZE 4194304
LEVEL3_CACHE_ASSOC 16
LEVEL3_CACHE_LINESIZE 64
LEVEL4_CACHE_SIZE 0
LEVEL4_CACHE_ASSOC 0
LEVEL4_CACHE_LINESIZE 0
Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Zong Li <zong.li@sifive.com> Suggested-by: Zong Li <zong.li@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220913061817.22564-8-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Ben Dooks [Tue, 13 Sep 2022 06:18:15 +0000 (06:18 +0000)]
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
Use the pr_fmt() macro to prefix all the output with "CCACHE:"
to avoid having to write it out each time, or make a large diff
when the next change comes along.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220913061817.22564-6-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Linus Torvalds [Thu, 13 Oct 2022 17:58:32 +0000 (10:58 -0700)]
Merge tag 'docs-6.1-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of relatively simple documentation fixes, plus a set of
patches catching the Chinese translation up with the front-page
rework"
* tag 'docs-6.1-2' of git://git.lwn.net/linux:
Documentation: rtla: Correct command line example
docs/zh_CN: add a man-pages link to zh_CN/index.rst
docs/zh_CN: Rewrite the Chinese translation front page
docs/zh_CN: add zh_CN/arch.rst
docs/zh_CN: promote the title of zh_CN/process/index.rst
docs/zh_CN: Update the translation of page_owner to 6.0-rc7
docs/zh_CN: Update the translation of ksm to 6.0-rc7
docs/howto: Replace abundoned URL of gmane.org
Documentation: ubifs: Fix compression idiom
Documentation/mm/page_owner.rst: delete frequently changing experimental data
docs/zh_CN: Fix build warning
docs: ftrace: Correct access mode
- wifi: mac80211: do not drop packets smaller than the LLC-SNAP
header on fast-rx
Previous releases - always broken:
- ieee802154: don't warn zero-sized raw_sendmsg()
- ipv6: ping: fix wrong checksum for large frames
- mctp: prevent double key removal and unref
- tcp/udp: fix memory leaks and races around IPV6_ADDRFORM
- hv_netvsc: fix race between VF offering and VF association message
Misc:
- remove -Warray-bounds silencing in the drivers, compilers fixed"
* tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
sunhme: fix an IS_ERR() vs NULL check in probe
net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
kcm: avoid potential race in kcm_tx_work
tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
net: phy: micrel: Fixes FIELD_GET assertion
openvswitch: add nf_ct_is_confirmed check before assigning the helper
tcp: Fix data races around icsk->icsk_af_ops.
ipv6: Fix data races around sk->sk_prot.
tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
tcp/udp: Fix memory leak in ipv6_renew_options().
mctp: prevent double key removal and unref
selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
netfilter: rpfilter/fib: Populate flowic_l3mdev field
selftests: netfilter: Test reverse path filtering
net/mlx5: Make ASO poll CQ usable in atomic context
tcp: cdg: allow tcp_cdg_release() to be called multiple times
inet: ping: fix recent breakage
ipv6: ping: fix wrong checksum for large frames
net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports
...
Linus Torvalds [Thu, 13 Oct 2022 17:36:57 +0000 (10:36 -0700)]
Merge tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Found that the synthetic events were using strlen/strscpy() on values
that could have come from userspace, and that is bad.
Consolidate the string logic of kprobe and eprobe and extend it to
the synthetic events to safely process string addresses.
- Clean up content of text dump in ftrace_bug() where the output does
not make char reads into signed and sign extending the byte output.
- Fix some kernel docs in the ring buffer code.
* tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix reading strings from synthetic events
tracing: Add "(fault)" name injection to kernel probes
tracing: Move duplicate code of trace_kprobe/eprobe.c into header
ring-buffer: Fix kernel-doc
ftrace: Fix char print issue in print_ip_ins()
Linus Torvalds [Thu, 13 Oct 2022 17:21:37 +0000 (10:21 -0700)]
Merge tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A quiet round this time: several assorted filesystem fixes, the most
noteworthy one being some additional wakeups in cap handling code, and
a messenger cleanup"
* tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client:
ceph: remove Sage's git tree from documentation
ceph: fix incorrectly showing the .snap size for stat
ceph: fail the open_by_handle_at() if the dentry is being unlinked
ceph: increment i_version when doing a setattr with caps
ceph: Use kcalloc for allocating multiple elements
ceph: no need to wait for transition RDCACHE|RD -> RD
ceph: fail the request if the peer MDS doesn't support getvxattr op
ceph: wake up the waiters if any new caps comes
libceph: drop last_piece flag from ceph_msg_data_cursor
Linus Torvalds [Thu, 13 Oct 2022 16:58:42 +0000 (09:58 -0700)]
Merge tag 'nfs-for-6.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add NFSv4.2 xattr tracepoints
- Replace xprtiod WQ in rpcrdma
- Flexfiles cancels I/O on layout recall or revoke
Bugfixes and Cleanups:
- Directly use ida_alloc() / ida_free()
- Don't open-code max_t()
- Prefer using strscpy over strlcpy
- Remove unused forward declarations
- Always return layout states on flexfiles layout return
- Have LISTXATTR treat NFS4ERR_NOXATTR as an empty reply instead of
error
- Allow more xprtrdma memory allocations to fail without triggering a
reclaim
- Various other xprtrdma clean ups
- Fix rpc_killall_tasks() races"
* tag 'nfs-for-6.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits)
NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked
SUNRPC: Add API to force the client to disconnect
SUNRPC: Add a helper to allow pNFS drivers to selectively cancel RPC calls
SUNRPC: Fix races with rpc_killall_tasks()
xprtrdma: Fix uninitialized variable
xprtrdma: Prevent memory allocations from driving a reclaim
xprtrdma: Memory allocation should be allowed to fail during connect
xprtrdma: MR-related memory allocation should be allowed to fail
xprtrdma: Clean up synopsis of rpcrdma_regbuf_alloc()
xprtrdma: Clean up synopsis of rpcrdma_req_create()
svcrdma: Clean up RPCRDMA_DEF_GFP
SUNRPC: Replace the use of the xprtiod WQ in rpcrdma
NFSv4.2: Add a tracepoint for listxattr
NFSv4.2: Add tracepoints for getxattr, setxattr, and removexattr
NFSv4.2: Move TRACE_DEFINE_ENUM(NFS4_CONTENT_*) under CONFIG_NFS_V4_2
NFSv4.2: Add special handling for LISTXATTR receiving NFS4ERR_NOXATTR
nfs: remove nfs_wait_atomic_killable() and nfs_write_prepare() declaration
NFSv4: remove nfs4_renewd_prepare_shutdown() declaration
fs/nfs/pnfs_nfs.c: fix spelling typo and syntax error in comment
NFSv4/pNFS: Always return layout stats on layout return for flexfiles
...
Pierre Gondois [Thu, 6 Oct 2022 08:44:09 +0000 (10:44 +0200)]
Documentation: rtla: Correct command line example
The '-t/-T' parameters seem to have been swapped:
-t/--trace[=file]: save the stopped trace
to [file|timerlat_trace.txt]
-T/--thread us: stop trace if the thread latency
is higher than the argument in us
Dan Carpenter [Wed, 12 Oct 2022 15:01:32 +0000 (18:01 +0300)]
sunhme: fix an IS_ERR() vs NULL check in probe
The devm_request_region() function does not return error pointers, it
returns NULL on error.
Fixes: 53707b6e0fb8 ("sunhme: switch to devres") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Link: https://lore.kernel.org/r/Y0bWzJL8JknX8MUf@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Wed, 12 Oct 2022 15:00:59 +0000 (18:00 +0300)]
net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
The __prestera_nexthop_group_create() function returns NULL on error
and the prestera_nexthop_group_get() returns error pointers. Fix these
two checks.
Fixes: cfdbad2b5a57 ("net: marvell: prestera: Add router nexthops ABI") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Y0bWq+7DoKK465z8@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 12 Oct 2022 13:34:12 +0000 (13:34 +0000)]
kcm: avoid potential race in kcm_tx_work
syzbot found that kcm_tx_work() could crash [1] in:
/* Primarily for SOCK_SEQPACKET sockets */
if (likely(sk->sk_socket) &&
test_bit(SOCK_NOSPACE, &sk->sk_socket->flags)) {
<<*>> clear_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
sk->sk_write_space(sk);
}
I think the reason is that another thread might concurrently
run in kcm_release() and call sock_orphan(sk) while sk is not
locked. kcm_tx_work() find sk->sk_socket being NULL.
[1]
BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:86 [inline]
BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
BUG: KASAN: null-ptr-deref in kcm_tx_work+0xff/0x160 net/kcm/kcmsock.c:742
Write of size 8 at addr 0000000000000008 by task kworker/u4:3/53
tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
Eric Dumazet reported a use-after-free related to the per-netns ehash
series. [0]
When we create a TCP socket from userspace, the socket always holds a
refcnt of the netns. This guarantees that a reqsk timer is always fired
before netns dismantle. Each reqsk has a refcnt of its listener, so the
listener is not freed before the reqsk, and the net is not freed before
the listener as well.
OTOH, when in-kernel users create a TCP socket, it might not hold a refcnt
of its netns. Thus, a reqsk timer can be fired after the netns dismantle
and access freed per-netns ehash.
To avoid the use-after-free, we need to clean up TCP_NEW_SYN_RECV sockets
in inet_twsk_purge() if the netns uses a per-netns ehash.
BUG: KASAN: use-after-free in tcp_or_dccp_get_hashinfo
include/net/inet_hashtables.h:181 [inline]
BUG: KASAN: use-after-free in reqsk_queue_unlink+0x320/0x350
net/ipv4/inet_connection_sock.c:913
Read of size 8 at addr ffff88807545bd80 by task syz-executor.2/8301
Palmer Dabbelt [Thu, 13 Oct 2022 15:46:31 +0000 (08:46 -0700)]
Merge patch series "Some style cleanups for recent extension additions"
Heiko Stuebner <heiko@sntech.de> says:
As noted by some people, some parts of the recently added extensions
(svpbmt, zicbom) + t-head errata could use some styling upgrades.
So this series provides these.
changes in v2:
- add patch also converting cpufeature probe to BIT()
- update commit message in patch1 (Conor)
Heiko Stuebner (5):
riscv: cleanup svpbmt cpufeature probing
riscv: drop some idefs from CMO initialization
riscv: use BIT() macros in t-head errata init
riscv: use BIT() marco for cpufeature probing
riscv: check for kernel config option in t-head memory types errata
Link: https://lore.kernel.org/r/20220905111027.2463297-1-heiko@sntech.de
* b4-shazam-merge:
riscv: check for kernel config option in t-head memory types errata
riscv: use BIT() marco for cpufeature probing
riscv: use BIT() macros in t-head errata init
riscv: drop some idefs from CMO initialization
riscv: cleanup svpbmt cpufeature probing
Wrapping things in #ifdefs makes the code harder to read
while we also have IS_ENABLED() macros to do this in regular code
and the extension detection is not _that_ runtime critical.
So define a stub for riscv_noncoherent_supported() in the
non-CONFIG_RISCV_DMA_NONCOHERENT case and move the code to
us IS_ENABLED.
Fangrui Song [Sun, 18 Sep 2022 09:29:34 +0000 (02:29 -0700)]
riscv: Pass -mno-relax only on lld < 15.0.0
lld since llvm:6611d58f5bbc ("[ELF] Relax R_RISCV_ALIGN"), which will be
included in the 15.0.0 release, has implemented some RISC-V linker
relaxation. -mno-relax is no longer needed in
KBUILD_CFLAGS/KBUILD_AFLAGS to suppress R_RISCV_ALIGN which older lld
can not handle:
ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN
requires unimplemented linker relaxation; recompile with -mno-relax
but the .o is already compiled with -mno-relax
Also replace (DIV_ROUND_UP(len, 8) * 8) with ALIGN(len, 8), which, if
not optimized by the compiler, has the overhead of a multiplication
and a division. Do the same for roundup() by replacing it by round_up()
(division-less version, but requires the multiple to be a power of 2,
which is always the case for us).
And remove some unnecessary checks where !IS_ALIGNED() would fit, but
calling round_up() directly is fine as it's a no-op if the value is
already aligned.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Ronnie Sahlberg [Wed, 12 Oct 2022 11:13:03 +0000 (06:13 -0500)]
cifs: find and use the dentry for cached non-root directories also
This allows us to use cached attributes for the entries in a cached
directory for as long as a lease is held on the directory itself.
Previously we have always allowed "used cached attributes for 1 second"
but this extends this to the lifetime of the lease as well as making the
caching safer.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Ronnie Sahlberg [Thu, 6 Oct 2022 05:14:31 +0000 (00:14 -0500)]
cifs: enable caching of directories for which a lease is held
This expands the directory caching to now cache an open handle for all
directories (up to a maximum) and not just the root directory.
In this patch, locking and refcounting is intended to work as so:
The main function to get a reference to a cached handle is
find_or_create_cached_dir() called from open_cached_dir()
These functions are protected under the cfid_list_lock spin-lock
to make sure we do not race creating new references for cached dirs
with deletion of expired ones.
An successful open_cached_dir() will take out 2 references to the cfid if
this was the very first and successful call to open the directory and
it acquired a lease from the server.
One reference is for the lease and the other is for the cfid that we
return. The is lease reference is tracked by cfid->has_lease.
If the directory already has a handle with an active lease, then we just
take out one new reference for the cfid and return it.
It can happen that we have a thread that tries to open a cached directory
where we have a cfid already but we do not, yet, have a working lease. In
this case we will just return NULL, and this the caller will fall back to
the case when no handle was available.
In this model the total number of references we have on a cfid is
1 for while the handle is open and we have a lease, and one additional
reference for each open instance of a cfid.
Once we get a lease break (cached_dir_lease_break()) we remove the
cfid from the list under the spinlock. This prevents any new threads to
use it, and we also call smb2_cached_lease_break() via the work_queue
in order to drop the reference we got for the lease (we drop it outside
of the spin-lock.)
Anytime a thread calls close_cached_dir() we also drop a reference to the
cfid.
When the last reference to the cfid is released smb2_close_cached_fid()
will be invoked which will drop the reference ot the dentry we held for
this cfid and it will also, if we the handle is open/has a lease
also call SMB2_close() to close the handle on the server.
Two events require special handling:
invalidate_all_cached_dirs() this function is called from SMB2_tdis()
and cifs_mark_open_files_invalid().
In both cases the tcon is either gone already or will be shortly so
we do not need to actually close the handles. They will be dropped
server side as part of the tcon dropping.
But we have to be careful about a potential race with a concurrent
lease break so we need to take out additional refences to avoid the
cfid from being freed while we are still referencing it.
free_cached_dirs() which is called from tconInfoFree().
This is called quite late in the umount process so there should no longer
be any open handles or files and we can just free all the remaining data.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Thu, 6 Oct 2022 16:04:05 +0000 (13:04 -0300)]
cifs: prevent copying past input buffer boundaries
Prevent copying past @data buffer in smb2_validate_and_copy_iov() as
the output buffer in @iov might be potentially bigger and thus copying
more bytes than requested in @minbufsize.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Tue, 4 Oct 2022 18:10:09 +0000 (15:10 -0300)]
cifs: fix uninitialised var in smb2_compound_op()
Fix uninitialised variable @idata when calling smb2_compound_op() with
SMB2_OP_POSIX_QUERY_INFO.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
(ii) Set the resolved symlink target directly in inode->i_link and
use simple_get_link() for ->link() to simply return it.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Wed, 12 Oct 2022 04:26:33 +0000 (23:26 -0500)]
smb3: clarify multichannel warning
When server does not return network interfaces, clarify the
message to indicate that "multichannel not available" not just
that "empty network interface returned by server ..."
Suggested-by: Tom Talpey <tom@talpey.com> Reviewed-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Ronnie Sahlberg [Tue, 11 Oct 2022 23:12:07 +0000 (09:12 +1000)]
cifs: fix regression in very old smb1 mounts
BZ: 215375
Fixes: d4d3412e8da7 ("cifs: remove support for NTLM and weaker authentication algorithms") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
projects / kernel.git / log