ext4: fix overhead calculation to account for the reserved gdt blocks
The kernel calculation was underestimating the overhead by not taking
into account the reserved gdt blocks. With this change, the overhead
calculated by the kernel matches the overhead calculation in mke2fs.
Tadeusz Struk [Thu, 31 Mar 2022 20:05:15 +0000 (13:05 -0700)]
ext4: limit length to bitmap_maxbytes - blocksize in punch_hole
Syzbot found an issue [1] in ext4_fallocate().
The C reproducer [2] calls fallocate(), passing size 0xffeffeff000ul,
and offset 0x1000000ul, which, when added together exceed the
bitmap_maxbytes for the inode. This triggers a BUG in
ext4_ind_remove_space(). According to the comments in this function
the 'end' parameter needs to be one block after the last block to be
removed. In the case when the BUG is triggered it points to the last
block. Modify the ext4_punch_hole() function and add constraint that
caps the length to satisfy the one before laster block requirement.
Ye Bin [Thu, 24 Mar 2022 06:48:16 +0000 (14:48 +0800)]
ext4: fix use-after-free in ext4_search_dir
We got issue as follows:
EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue
==================================================================
BUG: KASAN: use-after-free in ext4_search_dir fs/ext4/namei.c:1394 [inline]
BUG: KASAN: use-after-free in search_dirblock fs/ext4/namei.c:1199 [inline]
BUG: KASAN: use-after-free in __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553
Read of size 1 at addr ffff8881317c3005 by task syz-executor117/2331
If read 'de->name_len' which address is 0xffff8881317c3005, obviously is
out of range, then will trigger use-after-free.
To solve this issue, 'dlimit' must reserve 8 bytes, as we will read
'de->name_len' to judge if '(char *) de + de->name_len' out of range.
Ye Bin [Mon, 21 Mar 2022 14:44:38 +0000 (22:44 +0800)]
ext4: fix symlink file size not match to file content
We got issue as follows:
[home]# fsck.ext4 -fn ram0yb
e2fsck 1.45.6 (20-Mar-2020)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Symlink /p3/d14/d1a/l3d (inode #3494) is invalid.
Clear? no
Entry 'l3d' in /p3/d14/d1a (3383) has an incorrect filetype (was 7, should be 0).
Fix? no
As the symlink file size does not match the file content. If the writeback
of the symlink data block failed, ext4_finish_bio() handles the end of IO.
However this function fails to mark the buffer with BH_write_io_error and
so when unmount does journal checkpoint it cannot detect the writeback
error and will cleanup the journal. Thus we've lost the correct data in the
journal area. To solve this issue, mark the buffer as BH_write_io_error in
ext4_finish_bio().
Darrick J. Wong [Tue, 8 Mar 2022 18:50:43 +0000 (10:50 -0800)]
ext4: fix fallocate to use file_modified to update permissions consistently
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Ritesh Harjani [Sat, 12 Mar 2022 05:39:55 +0000 (11:09 +0530)]
ext4: fix remaining two trace events to use same printk convention
All ext4 & jbd2 trace events starts with "dev Major:Minor".
While we are still improving/adding the ftrace events for FC,
let's fix last two remaining trace events to follow the same
convention.
Ritesh Harjani [Sat, 12 Mar 2022 05:39:54 +0000 (11:09 +0530)]
ext4: add commit tid info in ext4_fc_commit_start/stop trace events
This adds commit_tid info in ext4_fc_commit_start/stop which is helpful
in debugging fast_commit issues.
For e.g. issues where due to jbd2 journal full commit, FC miss to commit
updates to a file.
Also improves TP_prink format string i.e. all ext4 and jbd2 trace events
starts with "dev MAjOR,MINOR". Let's follow the same convention while we
are still at it.
Ritesh Harjani [Sat, 12 Mar 2022 05:39:53 +0000 (11:09 +0530)]
ext4: add commit_tid info in jbd debug log
This adds commit_tid argument in ext4_fc_update_stats()
so that we can add this information too in jbd_debug logs.
This is also required in a later patch to pass the commit_tid info in
ext4_fc_commit_start/stop() trace events.
Ritesh Harjani [Sat, 12 Mar 2022 05:39:52 +0000 (11:09 +0530)]
ext4: add transaction tid info in fc_track events
This patch adds the transaction & inode tid info in trace events for
callers of ext4_fc_track_template(). This is helpful in debugging race
conditions where an inode could belong to two different transaction tids.
It also fixes the checkpatch warnings which says use tabs instead of
spaces.
Ritesh Harjani [Sat, 12 Mar 2022 05:39:50 +0000 (11:09 +0530)]
ext4: return early for non-eligible fast_commit track events
Currently ext4_fc_track_template() checks, whether the trace event
path belongs to replay or does sb has ineligible set, if yes it simply
returns. This patch pulls those checks before calling
ext4_fc_track_template() in the callers of ext4_fc_track_template().
[ Add checks to ext4_rename() which calls the __ext4_fc_track_*()
functions directly. -- TYT ]
Ritesh Harjani [Sat, 12 Mar 2022 05:39:49 +0000 (11:09 +0530)]
ext4: do not call FC trace event in ext4_fc_commit() if FS does not support FC
This just puts trace_ext4_fc_commit_start(sb) & ktime_get()
for measuring FC commit time, after the check of whether sb
supports JOURNAL_FAST_COMMIT or not.
Ritesh Harjani [Sat, 12 Mar 2022 05:39:48 +0000 (11:09 +0530)]
ext4: convert ext4_fc_track_dentry type events to use event class
One should use DECLARE_EVENT_CLASS for similar event types instead of
defining TRACE_EVENT for each event type. This is helpful in reducing
the text section footprint for e.g. [1]
Ritesh Harjani [Sat, 12 Mar 2022 05:39:47 +0000 (11:09 +0530)]
ext4: fix ext4_fc_stats trace point
ftrace's __print_symbolic() requires that any enum values used in the
symbol to string translation table be wrapped in a TRACE_DEFINE_ENUM
so that the enum value can be decoded from the ftrace ring buffer by
user space tooling.
This patch also fixes few other problems found in this trace point.
e.g. dereferencing structures in TP_printk which should not be done
at any cost.
Also to avoid checkpatch warnings, this patch removes those
whitespaces/tab stops issues.
Cc: stable@kernel.org Fixes: 95d2b4933dd9 ("ext4: main fast-commit commit path") Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/b4b9691414c35c62e570b723e661c80674169f9a.1647057583.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Thu, 10 Mar 2022 10:18:32 +0000 (11:18 +0100)]
ext4: warn when dirtying page w/o buffers in data=journal mode
Recently I've got a report of BUG_ON trigerring during transaction
commit in ext4_journalled_writepage_callback() because we've spotted a
dirty page without buffers. Add WARN_ON_ONCE to
ext4_journalled_set_page_dirty() to catch the problematic condition
earlier where we have better chance of understanding which code path is
creating dirty data without preparing the page properly. Also update the
comment with current information when we are at it.
Ojaswin Mujoo [Tue, 8 Mar 2022 09:52:01 +0000 (15:22 +0530)]
ext4: make mb_optimize_scan performance mount option work with extents
Currently mb_optimize_scan scan feature which improves filesystem
performance heavily (when FS is fragmented), seems to be not working
with files with extents (ext4 by default has files with extents).
This patch fixes that and makes mb_optimize_scan feature work
for files with extents.
Below are some performance numbers obtained when allocating a 10M and 100M
file with and w/o this patch on a filesytem with no 1M contiguous block.
Ojaswin Mujoo [Tue, 8 Mar 2022 09:52:00 +0000 (15:22 +0530)]
ext4: make mb_optimize_scan option work with set/unset mount cmd
After moving to the new mount API, mb_optimize_scan mount option
handling was not working as expected due to the parsed value always
being overwritten by default. Refactor and fix this to the expected
behavior described below:
* mb_optimize_scan=1 - On
* mb_optimize_scan=0 - Off
* mb_optimize_scan not passed - On if no. of BGs > threshold else off
* Remounts retain previous value unless we explicitly pass the option
with a new value
Theodore Ts'o [Thu, 3 Mar 2022 14:38:47 +0000 (09:38 -0500)]
ext4: don't BUG if someone dirty pages without asking ext4 first
[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance. A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].
This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).
So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed. More discussion and background can be found in the
thread starting at [2].
Colin Ian King [Tue, 1 Mar 2022 12:16:44 +0000 (12:16 +0000)]
ext4: remove redundant assignment to variable split_flag1
Variable split_flag1 is being assigned a value that is never read,
it is being re-assigned a new value in the following code block.
The assignment is redundant and can be removed.
Cleans up clang scan build warning:
fs/ext4/extents.c:3371:2: warning: Value stored to 'split_flag1' is
never read [deadcode.DeadStores]
Zhang Yi [Tue, 1 Mar 2022 11:17:04 +0000 (19:17 +0800)]
ext4: fix underflow in ext4_max_bitmap_size()
when ext4 filesystem is created with 64k block size, ^extent and
^huge_file features. the upper_limit would underflow during the
computations in ext4_max_bitmap_size(). The problem is the size of block
index tree for such large block size is more than i_blocks can carry.
So fix the computation to count with this possibility. After this fix,
the 'res' cannot overflow loff_t on the extreme case of filesystem with
huge_files and 64K block size, so this patch also revert commit efe4fd0a7338 ("ext4: fix loff_t overflow in ext4_max_bitmap_size()").
Yang Li [Tue, 1 Mar 2022 09:21:36 +0000 (17:21 +0800)]
ext4: fix ext4_mb_clear_bb() kernel-doc comment
Remove the excess description of @bh in ext4_mb_clear_bb() kernel-doc
comment to remove warnings found by running scripts/kernel-doc, which
is caused by using 'make W=1'.
fs/ext4/mballoc.c:5895: warning: Excess function parameter 'bh'
description in 'ext4_mb_clear_bb'
Ye Bin [Mon, 28 Feb 2022 02:48:15 +0000 (10:48 +0800)]
ext4: fix fs corruption when tring to remove a non-empty directory with IO error
We inject IO error when rmdir non empty direcory, then got issue as follows:
step1: mkfs.ext4 -F /dev/sda
step2: mount /dev/sda test
step3: cd test
step4: mkdir -p 1/2
step5: rmdir 1
[ 110.920551] ext4_empty_dir: inject fault
[ 110.921926] EXT4-fs warning (device sda): ext4_rmdir:3113: inode #12:
comm rmdir: empty directory '1' has too many links (3)
step6: cd ..
step7: umount test
step8: fsck.ext4 -f /dev/sda
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Entry '..' in .../??? (13) has deleted/unused inode 12. Clear<y>? yes
Pass 3: Checking directory connectivity
Unconnected directory inode 13 (...)
Connect to /lost+found<y>? yes
Pass 4: Checking reference counts
Inode 13 ref count is 3, should be 2. Fix<y>? yes
Pass 5: Checking group summary information
/dev/sda: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda: 12/131072 files (0.0% non-contiguous), 26157/524288 blocks
ext4_rmdir
if (!ext4_empty_dir(inode))
goto end_rmdir;
ext4_empty_dir
bh = ext4_read_dirblock(inode, 0, DIRENT_HTREE);
if (IS_ERR(bh))
return true;
Now if read directory block failed, 'ext4_empty_dir' will return true, assume
directory is empty. Obviously, it will lead to above issue.
To solve this issue, if read directory block failed 'ext4_empty_dir' just
return false. To avoid making things worse when file system is already
corrupted, 'ext4_empty_dir' also return false.
Ritesh Harjani [Mon, 21 Feb 2022 07:56:15 +0000 (13:26 +0530)]
ext4: improve fast_commit performance and scalability
Currently ext4_fc_commit_dentry_updates() is of quadratic time
complexity, which is causing performance bottlenecks with high
threads/file/dir count with fs_mark.
This patch makes commit dentry updates (and hence ext4_fc_commit()) path
to linear time complexity. Hence improves the performance of workloads
which does fsync on multiple threads/open files one-by-one.
Ritesh Harjani [Wed, 16 Feb 2022 07:02:51 +0000 (12:32 +0530)]
ext4: add extra check in ext4_mb_mark_bb() to prevent against possible corruption
This patch adds an extra checks in ext4_mb_mark_bb() function
to make sure we mark & report error if we were to mark/clear any
of the critical FS metadata specific bitmaps (&bail out) to prevent
from any accidental corruption.
Ritesh Harjani [Wed, 16 Feb 2022 07:02:50 +0000 (12:32 +0530)]
ext4: add strict range checks while freeing blocks
Currently ext4_mb_clear_bb() & ext4_group_add_blocks() only checks
whether the given block ranges (which is to be freed) belongs to any FS
metadata blocks or not, of the block's respective block group.
But to detect any FS error early, it is better to add more strict
checkings in those functions which checks whether the given blocks
belongs to any critical FS metadata or not within system-zone.
Ritesh Harjani [Wed, 16 Feb 2022 07:02:45 +0000 (12:32 +0530)]
ext4: refactor ext4_free_blocks() to pull out ext4_mb_clear_bb()
ext4_free_blocks() function became too long and confusing, this patch
just pulls out the ext4_mb_clear_bb() function logic from it
which clears the block bitmap and frees it.
Ritesh Harjani [Wed, 16 Feb 2022 07:02:44 +0000 (12:32 +0530)]
ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commit
In case of flex_bg feature (which is by default enabled), extents for
any given inode might span across blocks from two different block group.
ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the
starting block group, but it fails to read it again when the extent length
boundary overflows to another block group. Then in this below loop it
accesses memory beyond the block group bitmap buffer_head and results
into a data abort.
for (i = 0; i < clen; i++)
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
This patch adds this functionality for checking block group boundary in
ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different
block group.
w/o this patch, I was easily able to hit a data access abort using Power platform.
Ritesh Harjani [Wed, 16 Feb 2022 07:00:36 +0000 (12:30 +0530)]
jbd2: remove CONFIG_JBD2_DEBUG to update t_max_wait
CONFIG_JBD2_DEBUG and jbd2_journal_enable_debug knobs were added in
update_t_max_wait(), since earlier it used to take a spinlock for
updating t_max_wait, which could cause a bottleneck while starting a
txn (start_this_handle()).
Since in previous patch, we have killed t_handle_lock completely, we
could get rid of this debug config and knob to let t_max_wait be
updated by default again.
Ritesh Harjani [Wed, 16 Feb 2022 07:00:35 +0000 (12:30 +0530)]
jbd2: kill t_handle_lock transaction spinlock
This patch kills t_handle_lock transaction spinlock completely from
jbd2.
To explain the reasoning, currently there were three sites at which
this spinlock was used.
1. jbd2_journal_wait_updates()
a. Based on careful code review it can be seen that, we don't need this
lock here. This is since we wait for any currently ongoing updates
based on a atomic variable t_updates. And we anyway don't take any
t_handle_lock while in stop_this_handle().
i.e.
write_lock(&journal->j_state_lock()
jbd2_journal_wait_updates() stop_this_handle()
while (atomic_read(txn->t_updates) { |
DEFINE_WAIT(wait); |
prepare_to_wait(); |
if (atomic_read(txn->t_updates) if (atomic_dec_and_test(txn->t_updates))
write_unlock(&journal->j_state_lock);
schedule(); wake_up()
write_lock(&journal->j_state_lock);
finish_wait();
}
txn->t_state = T_COMMIT
write_unlock(&journal->j_state_lock);
b. Also note that between atomic_inc(&txn->t_updates) in
start_this_handle() and jbd2_journal_wait_updates(), the
synchronization happens via read_lock(journal->j_state_lock) in
start_this_handle();
2. jbd2_journal_extend()
a. jbd2_journal_extend() is called with the handle of each process from
task_struct. So no lock required in updating member fields of handle_t
b. For member fields of h_transaction, all updates happens only via
atomic APIs (which is also within read_lock()).
So, no need of this transaction spinlock.
3. update_t_max_wait()
Based on Jan suggestion, this can be carefully removed using atomic
cmpxchg API.
Note that there can be several processes which are waiting for a new
transaction to be allocated and started. For doing this only one
process will succeed in taking write_lock() and allocating a new txn.
After that all of the process will be updating the t_max_wait (max
transaction wait time). This can be done via below method w/o taking
any locks using atomic cmpxchg.
For more details refer [1]
new = get_new_val();
old = READ_ONCE(ptr->max_val);
while (old < new)
old = cmpxchg(&ptr->max_val, old, new);
Ritesh Harjani [Thu, 10 Feb 2022 15:37:11 +0000 (21:07 +0530)]
jbd2: fix use-after-free of transaction_t race
jbd2_journal_wait_updates() is called with j_state_lock held. But if
there is a commit in progress, then this transaction might get committed
and freed via jbd2_journal_commit_transaction() ->
jbd2_journal_free_transaction(), when we release j_state_lock.
So check for journal->j_running_transaction everytime we release and
acquire j_state_lock to avoid use-after-free issue.
Link: https://lore.kernel.org/r/948c2fed518ae739db6a8f7f83f1d58b504f87d0.1644497105.git.ritesh.list@gmail.com Fixes: cc9467b7f6181763 ("jbd2: refactor wait logic for transaction updates into a common function") Cc: stable@kernel.org Reported-and-tested-by: syzbot+afa2ca5171d93e44b348@syzkaller.appspotmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Tue, 1 Feb 2022 13:13:45 +0000 (14:13 +0100)]
ext4: fix remount with 'abort' option
After commit b02163188675 ("ext4: get rid of super block and sbi from
handle_mount_ops()") the 'abort' options stopped working. This is
because we're using ctx_set_mount_flags() helper that's expecting an
argument with the appropriate bit set, but instead got
EXT4_MF_FS_ABORTED which is a bit position. ext4_set_mount_flag() is
using set_bit() while ctx_set_mount_flags() was using bitwise OR.
Create a separate helper ctx_set_mount_flag() to handle setting the
mount_flags correctly.
While we're at it clean up the EXT4_SET_CTX macros so that we're only
creating helpers that we actually use to avoid warnings.
Fixes: b02163188675 ("ext4: get rid of super block and sbi from handle_mount_ops()") Signed-off-by: Lukas Czerner <lczerner@redhat.com> Cc: Ye Bin <yebin10@huawei.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Tested-by: Gabriel Krisman Bertazi <krisman@collabora.com> Link: https://lore.kernel.org/r/20220201131345.77591-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Sun, 20 Feb 2022 20:04:14 +0000 (12:04 -0800)]
Merge tag 'edac_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"Fix a long-standing struct alignment bug in the EDAC struct allocation
code"
* tag 'edac_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Fix calculation of returned address and next offset in edac_align_ptr()
Linus Torvalds [Sun, 20 Feb 2022 19:51:49 +0000 (11:51 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes, all in drivers.
The ufs and qedi fixes are minor; the lpfc one is a bit bigger because
it involves adding a heuristic to detect and deal with common but not
standards compliant behaviour"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix divide by zero in ufshcd_map_queues()
scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop
scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp()
Linus Torvalds [Sun, 20 Feb 2022 19:30:18 +0000 (11:30 -0800)]
Merge tag 'dmaengine-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes for:
- ptdma error handling in init
- lock fix in at_hdmac
- error path and error num fix for sh dma
- pm balance fix for stm32"
* tag 'dmaengine-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: shdma: Fix runtime PM imbalance on error
dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size
dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe
dmaengine: sh: rcar-dmac: Check for error num after setting mask
dmaengine: at_xdmac: Fix missing unlock in at_xdmac_tasklet()
dmaengine: ptdma: Fix the error handling path in pt_core_init()
Linus Torvalds [Sun, 20 Feb 2022 19:23:48 +0000 (11:23 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some driver updates, a MAINTAINERS fix, and additions to COMPILE_TEST
(so we won't miss build problems again)"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: remove duplicate entry for i2c-qcom-geni
i2c: brcmstb: fix support for DSL and CM variants
i2c: qup: allow COMPILE_TEST
i2c: imx: allow COMPILE_TEST
i2c: cadence: allow COMPILE_TEST
i2c: qcom-cci: don't put a device tree node before i2c_add_adapter()
i2c: qcom-cci: don't delete an unregistered adapter
i2c: bcm2835: Avoid clock stretching timeouts
Linus Torvalds [Sun, 20 Feb 2022 19:15:46 +0000 (11:15 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for Synaptics touchpads in RMI4 mode failing to suspend/resume
properly because I2C client devices are now being suspended and
resumed asynchronously which changed the ordering
- a change to make sure we do not set right and middle buttons
capabilities on touchpads that are "buttonpads" (i.e. do not have
separate physical buttons)
- a change to zinitix touchscreen driver adding more compatible
strings/IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: psmouse - set up dependency between PS/2 and SMBus companions
Input: zinitix - add new compatible strings
Input: clear BTN_RIGHT/MIDDLE on buttonpads
Linus Torvalds [Sun, 20 Feb 2022 19:07:46 +0000 (11:07 -0800)]
Merge tag 'for-v5.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"Three regression fixes for the 5.17 cycle:
- build warning fix for power-supply documentation
- pointer size fix in cw2015 battery driver
- OOM handling in bq256xx charger driver"
* tag 'for-v5.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq256xx: Handle OOM correctly
power: supply: core: fix application of sizeof to pointer
power: supply: fix table problem in sysfs-class-power
Linus Torvalds [Sun, 20 Feb 2022 19:01:47 +0000 (11:01 -0800)]
Merge tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr test/doc fixes from Christian Brauner:
"This contains a fix for one of the selftests for the mount_setattr
syscall to create idmapped mounts, an entry for idmapped mounts for
maintainers, and missing kernel documentation for the helper we split
out some time ago to get and yield write access to a mount when
changing mount properties"
* tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: add kernel doc for mnt_{hold,unhold}_writers()
MAINTAINERS: add entry for idmapped mounts
tests: fix idmapped mount_setattr test
Linus Torvalds [Sun, 20 Feb 2022 18:55:05 +0000 (10:55 -0800)]
Merge tag 'pidfd.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fix from Christian Brauner:
"This fixes a problem reported by lockdep when installing a pidfd via
fd_install() with siglock and the tasklisk write lock held in
copy_process() when calling clone()/clone3() with CLONE_PIDFD.
Originally a pidfd was created prior to holding any of these locks but
this required a call to ksys_close(). So quite some time ago in 9506a95c5a8d ("copy_process(): don't use ksys_close() on cleanups") we
switched to a get_unused_fd_flags() + fd_install() model.
As part of that we moved fd_install() as late as possible. This was
done for two main reasons. First, because we needed to ensure that we
call fd_install() past the point of no return as once that's called
the fd is live in the task's file table. Second, because we tried to
ensure that the fd is visible in /proc/<pid>/fd/<pidfd> right when the
task is visible.
This fix moves the fd_install() to an even later point which means
that a task will be visible in proc while the pidfd isn't yet under
/proc/<pid>/fd/<pidfd>.
While this is a user visible change it's very unlikely that this will
have any impact. Nobody should be relying on that and if they do we
need to come up with something better but again, it's doubtful this is
relevant"
* tag 'pidfd.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
copy_process(): Move fd_install() out of sighand->siglock critical section
Linus Torvalds [Sun, 20 Feb 2022 18:44:11 +0000 (10:44 -0800)]
Merge branch 'ucount-rlimit-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucounts fixes from Eric Biederman:
"Michal Koutný recently found some bugs in the enforcement of
RLIMIT_NPROC in the recent ucount rlimit implementation.
In this set of patches I have developed a very conservative approach
changing only what is necessary to fix the bugs that I can see
clearly. Cleanups and anything that is making the code more consistent
can follow after we have the code working as it has historically.
The problem is not so much inconsistencies (although those exist) but
that it is very difficult to figure out what the code should be doing
in the case of RLIMIT_NPROC.
All other rlimits are only enforced where the resource is acquired
(allocated). RLIMIT_NPROC by necessity needs to be enforced in an
additional location, and our current implementation stumbled it's way
into that implementation"
* 'ucount-rlimit-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Handle wrapping in is_ucounts_overlimit
ucounts: Move RLIMIT_NPROC handling after set_user
ucounts: Base set_cred_ucounts changes on the real user
ucounts: Enforce RLIMIT_NPROC not RLIMIT_NPROC+1
rlimit: Fix RLIMIT_NPROC enforcement failure caused by capability calls in set_user
Wolfram Sang [Fri, 18 Feb 2022 10:49:04 +0000 (11:49 +0100)]
MAINTAINERS: remove duplicate entry for i2c-qcom-geni
The driver is already covered in the ARM/QUALCOMM section. Also, Akash
Asthana's email bounces meanwhile and Mukesh Savaliya has never
responded to mails regarding this driver.
Signed-off-by: Wolfram Sang <wsa@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Peter Zijlstra [Mon, 14 Feb 2022 09:16:57 +0000 (10:16 +0100)]
sched: Fix yet more sched_fork() races
Where commit 6e9fcdf29782 ("kernel/sched: Fix sched_fork() access an
invalid sched_task_group") fixed a fork race vs cgroup, it opened up a
race vs syscalls by not placing the task on the runqueue before it
gets exposed through the pidhash.
Commit c4692466afa2 ("sched/fair: Fix fault in reweight_entity") is
trying to fix a single instance of this, instead fix the whole class
of issues, effectively reverting this commit.
Linus Torvalds [Sat, 19 Feb 2022 00:24:44 +0000 (16:24 -0800)]
Merge tag 'nfs-for-5.17-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
- Fix unnecessary changeattr revalidations
- Fix resolving symlinks during directory lookups
- Don't report writeback errors in nfs_getattr()
* tag 'nfs-for-5.17-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Do not report writeback errors in nfs_getattr()
NFS: LOOKUP_DIRECTORY is also ok with symlinks
NFS: Remove an incorrect revalidation in nfs4_update_changeattr_locked()
Linus Torvalds [Sat, 19 Feb 2022 00:19:14 +0000 (16:19 -0800)]
Merge tag 'acpi-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These make an excess warning message go away and fix a recently
introduced boot failure on a vintage machine.
Specifics:
- Change the log level of the "table not found" message in
acpi_table_parse_entries_array() to debug to prevent it from
showing up in the logs unnecessarily (Dan Williams)
- Add a C-state limit quirk for 32-bit ThinkPad T40 to prevent it
from crashing on boot after recent changes in the ACPI processor
driver (Woody Suwalski)"
* tag 'acpi-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40
ACPI: tables: Quiet ACPI table not found warning
Linus Torvalds [Sat, 19 Feb 2022 00:14:13 +0000 (16:14 -0800)]
Merge tag 'riscv-for-linus-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A set of three fixes, all aimed at fixing some fallout from the recent
sparse hart ID support"
* tag 'riscv-for-linus-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix IPI/RFENCE hmask on non-monotonic hartid ordering
RISC-V: Fix handling of empty cpu masks
RISC-V: Fix hartid mask handling for hartid 31 and up
Dmitry Torokhov [Tue, 15 Feb 2022 21:32:26 +0000 (13:32 -0800)]
Input: psmouse - set up dependency between PS/2 and SMBus companions
When we switch from emulated PS/2 to native (RMI4 or Elan) protocols, we
create SMBus companion devices that are attached to I2C/SMBus controllers.
However, when suspending and resuming, we also need to make sure that we
take into account the PS/2 device they are associated with, so that PS/2
device is suspended after the companion and resumed before it, otherwise
companions will not work properly. Before I2C devices were marked for
asynchronous suspend/resume, this ordering happened naturally, but now we
need to enforce it by establishing device links, with PS/2 devices being
suppliers and SMBus companions being consumers.
Linus Torvalds [Fri, 18 Feb 2022 17:27:10 +0000 (09:27 -0800)]
Merge tag 'block-5.17-2022-02-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Surprise removal fix (Christoph)
- Ensure that pages are zeroed before submitted for userspace IO
(Haimin)
- Fix blk-wbt accounting issue with BFQ (Laibin)
- Use bsize for discard granularity in loop (Ming)
- Fix missing zone handling in blk_complete_request() (Pankaj)
* tag 'block-5.17-2022-02-17' of git://git.kernel.dk/linux-block:
block/wbt: fix negative inflight counter when remove scsi device
block: fix surprise removal for drivers calling blk_set_queue_dying
block-map: add __GFP_ZERO flag for alloc_page in function bio_copy_kern
block: loop:use kstatfs.f_bsize of backing file to set discard granularity
block: Add handling for zone append command in blk_complete_request
- Regression fix for Realtek HD-audio mutex deadlock
- Regression fix for USB-audio PM resume error
- More coverage of ASoC core control API notification fixes
- Old regression fixes for HD-audio probe mask
- Fixes for ASoC Realtek codec work handling
- Other device-specific quirks / fixes"
* tag 'sound-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ASoC: intel: skylake: Set max DMA segment size
ASoC: SOF: hda: Set max DMA segment size
ALSA: hda: Set max DMA segment size
ALSA: hda/realtek: Fix deadlock by COEF mutex
ALSA: usb-audio: Don't abort resume upon errors
ALSA: hda: Fix missing codec probe on Shenker Dock 15
ALSA: hda: Fix regression on forced probe mask option
ALSA: hda/realtek: Add quirk for Legion Y9000X 2019
ALSA: usb-audio: revert to IMPLICIT_FB_FIXED_DEV for M-Audio FastTrack Ultra
ASoC: wm_adsp: Correct control read size when parsing compressed buffer
ASoC: qcom: Actually clear DMA interrupt register for HDMI
ALSA: memalloc: invalidate SG pages before sync
ALSA: memalloc: Fix dma_need_sync() checks
MAINTAINERS: update cros_ec_codec maintainers
ASoC: rt5682: do not block workqueue if card is unbound
ASoC: rt5668: do not block workqueue if card is unbound
ASoC: rt5682s: do not block workqueue if card is unbound
ASoC: tas2770: Insert post reset delay
ASoC: Revert "ASoC: mediatek: Check for error clk pointer"
ASoC: amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine driver
...
Linus Torvalds [Fri, 18 Feb 2022 17:10:14 +0000 (09:10 -0800)]
Merge tag 'powerpc-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix boot failure on 603 with DEBUG_PAGEALLOC and KFENCE
- Fix 32-build with newer binutils that rejects 'ptesync' etc
Thanks to Anders Roxell, Christophe Leroy, and Maxime Bizon.
* tag 'powerpc-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/lib/sstep: fix 'ptesync' build error
powerpc/603: Fix boot failure with DEBUG_PAGEALLOC and KFENCE
Linus Torvalds [Fri, 18 Feb 2022 17:04:27 +0000 (09:04 -0800)]
Merge tag '5.17-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six small smb3 client fixes, three for stable:
- fix for snapshot mount option
- two ACL related fixes
- use after free race fix
- fix for confusing warning message logged with older dialects"
* tag '5.17-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix confusing unneeded warning message on smb2.1 and earlier
cifs: modefromsids must add an ACE for authenticated users
cifs: fix double free race when mount fails in cifs_get_root()
cifs: do not use uninitialized data in the owner/group sid
cifs: fix set of group SID via NTSD xattrs
smb3: fix snapshot mount option
xfpregs_set() handles 32-bit REGSET_XFP and 64-bit REGSET_FP. The actual
code treats these regsets as modern FX state (i.e. the beginning part of
XSTATE). The declarations of the regsets thought they were the legacy
i387 format. The code thought they were the 32-bit (no xmm8..15) variant
of XSTATE and, for good measure, made the high bits disappear by zeroing
the wrong part of the buffer. The latter broke ptrace, and everything
else confused anyone trying to understand the code. In particular, the
nonsense definitions of the regsets confused me when I wrote this code.
Clean this all up. Change the declarations to match reality (which
shouldn't change the generated code, let alone the ABI) and fix
xfpregs_set() to clear the correct bits and to only do so for 32-bit
callers.
Rafał Miłecki [Tue, 15 Feb 2022 07:27:35 +0000 (08:27 +0100)]
i2c: brcmstb: fix support for DSL and CM variants
DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
DT binding for that reason. This driver was checking for a wrong
"compatible" however which resulted in an incorrect setup.
Fixes: 3505762f0dfd ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Linus Torvalds [Thu, 17 Feb 2022 23:21:42 +0000 (15:21 -0800)]
Merge tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to ftrace, exec, and seccomp tests build, run-time and install
bugs. These bugs are in the way of running the tests"
* tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT
selftests/seccomp: Fix seccomp failure by adding missing headers
selftests/exec: Add non-regular to TEST_GEN_PROGS
Linus Torvalds [Thu, 17 Feb 2022 21:11:46 +0000 (13:11 -0800)]
Merge tag 'drm-fixes-2022-02-18' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes for rc5, nothing really stands out, mostly some amdgpu
and i915 fixes with mediatek, radeon and some misc fixes.
cma-helper:
- set VM_DONTEXPAND
atomic:
- error handling fix
mediatek:
- fix probe defer loop with external bridge
i915:
- GVT kerneldoc cleanup.
- GVT Kconfig should depend on X86
- Prevent out of range access in SWSCI display code
- Fix mbus join and dbuf slice config lookup
- Fix inverted priority selection in the TTM backend
- Fix FBC plane end Y offset check"
* tag 'drm-fixes-2022-02-18' of git://anongit.freedesktop.org/drm/drm:
drm/atomic: Don't pollute crtc_state->mode_blob with error pointers
drm/radeon: Fix backlight control on iMac 12,1
drm/amd/pm: correct the sequence of sending gpu reset msg
drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix.
drm/amd/pm: correct UMD pstate clocks for Dimgrey Cavefish and Beige Goby
drm/i915/fbc: Fix the plane end Y offset check
drm/i915/opregion: check port number bounds for SWSCI display power state
drm/i915/ttm: tweak priority hint selection
drm/i915: Fix mbus join config lookup
drm/i915: Fix dbuf slice config lookup
drm/cma-helper: Set VM_DONTEXPAND for mmap
drm/mediatek: mtk_dsi: Avoid EPROBE_DEFER loop with external bridge
drm/i915/gvt: Make DRM_I915_GVT depend on X86
drm/i915/gvt: clean up kernel-doc in gtt.c
Linus Torvalds [Thu, 17 Feb 2022 19:33:59 +0000 (11:33 -0800)]
Merge tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
Current release - regressions:
- dsa: lantiq_gswip: fix use after free in gswip_remove()
- smc: avoid overwriting the copies of clcsock callback functions
Current release - new code bugs:
- iwlwifi:
- fix use-after-free when no FW is present
- mei: fix the pskb_may_pull check in ipv4
- mei: retry mapping the shared area
- mvm: don't feed the hardware RFKILL into iwlmei
Previous releases - regressions:
- ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
- tipc: fix wrong publisher node address in link publications
- iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW
assertion
- bgmac: make idm and nicpm resource optional again
- atl1c: fix tx timeout after link flap
Previous releases - always broken:
- vsock: remove vsock from connected table when connect is
interrupted by a signal
- ping: change destination interface checks to match raw sockets
- crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
semantics (and null-deref) after SO_RESERVE_MEM was added
- ipv6: make exclusive flowlabel checks per-netns
- bonding: force carrier update when releasing slave
- sched: limit TC_ACT_REPEAT loops
- bridge: multicast: notify switchdev driver whenever MC processing
gets disabled because of max entries reached
- wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found
- iwlwifi: fix locking when "HW not ready"
- phy: mediatek: remove PHY mode check on MT7531
- dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
- dsa: lan9303:
- fix polarity of reset during probe
- fix accelerated VLAN handling"
* tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
bonding: force carrier update when releasing slave
nfp: flower: netdev offload check for ip6gretap
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
ipv4: fix data races in fib_alias_hw_flags_set
net: dsa: lan9303: add VLAN IDs to master device
net: dsa: lan9303: handle hwaccel VLAN tags
vsock: remove vsock from connected table when connect is interrupted by a signal
Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
ping: fix the dif and sdif check in ping_lookup
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
net: sched: limit TC_ACT_REPEAT loops
tipc: fix wrong notification node addresses
net: dsa: lantiq_gswip: fix use after free in gswip_remove()
ipv6: per-netns exclusive flowlabel checks
net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
CDC-NCM: avoid overflow in sanity checking
mctp: fix use after free
net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
bonding: fix data-races around agg_select_timer
dpaa2-eth: Initialize mutex used in one step timestamping path
...
Zhang Changzhong [Wed, 16 Feb 2022 14:18:08 +0000 (22:18 +0800)]
bonding: force carrier update when releasing slave
In __bond_release_one(), bond_set_carrier() is only called when bond
device has no slave. Therefore, if we remove the up slave from a master
with two slaves and keep the down slave, the master will remain up.
Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond))
statement.
Reinette Chatre [Wed, 2 Feb 2022 19:41:12 +0000 (11:41 -0800)]
x86/sgx: Fix missing poison handling in reclaimer
The SGX reclaimer code lacks page poison handling in its main
free path. This can lead to avoidable machine checks if a
poisoned page is freed and reallocated instead of being
isolated.
A troublesome scenario is:
1. Machine check (#MC) occurs (asynchronous, !MF_ACTION_REQUIRED)
2. arch_memory_failure() is eventually called
3. (SGX) page->poison set to 1
4. Page is reclaimed
5. Page added to normal free lists by sgx_reclaim_pages()
^ This is the bug (poison pages should be isolated on the
sgx_poison_page_list instead)
6. Page is reallocated by some innocent enclave, a second (synchronous)
in-kernel #MC is induced, probably during EADD instruction.
^ This is the fallout from the bug
(6) is unfortunate and can be avoided by replacing the open coded
enclave page freeing code in the reclaimer with sgx_free_epc_page()
to obtain support for poison page handling that includes placing the
poisoned page on the correct list.
Fixes: 6f798ed2d215 ("x86/sgx: Add new sgx_epc_page flag bit to mark free pages") Fixes: 06ff25541112 ("x86/sgx: Initial poison handling for dirty and free pages") Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lkml.kernel.org/r/dcc95eb2aaefb042527ac50d0a50738c7c160dac.1643830353.git.reinette.chatre@intel.com
Commit bd6ea65287c7 ("Fix regression due to "fs: move binfmt_misc sysctl
to its own file") fixed a regression, however it failed to add a
kmemleak_not_leak().
Fixes: bd6ea65287c7 ("Fix regression due to "fs: move binfmt_misc sysctl to its own file") Reported-by: Tong Zhang <ztong0001@gmail.com> Cc: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix perf_cpu_map__for_each_cpu macro in libperf, providing access to
the CPU iterator
- Sync linux/perf_event.h UAPI with the kernel sources
- Update Jiri Olsa's email address in MAINTAINERS
* tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf: Defer freeing string after possible strlen() on it
perf test: Fix arm64 perf_event_attr tests wrt --call-graph initialization
libsubcmd: Fix use-after-free for realloc(..., 0)
libperf: Fix perf_cpu_map__for_each_cpu macro
perf cs-etm: Fix corrupt inject files when only last branch option is enabled
perf cs-etm: No-op refactor of synth opt usage
libperf: Fix 32-bit build for tests uint64_t printf
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
perf trace: Avoid early exit due SIGCHLD from non-workload processes
MAINTAINERS: Update Jiri's email address
Danie du Toit [Thu, 17 Feb 2022 12:48:20 +0000 (14:48 +0200)]
nfp: flower: netdev offload check for ip6gretap
IPv6 GRE tunnels are not being offloaded, this is caused by a missing
netdev offload check. The functionality of IPv6 GRE tunnel offloading
was previously added but this check was not included. Adding the
ip6gretap check allows IPv6 GRE tunnels to be offloaded correctly.
Fixes: 57d5a5cb676b ("nfp: flower: Allow ipv6gretap interface for offloading") Signed-off-by: Danie du Toit <danie.dutoit@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220217124820.40436-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 16 Feb 2022 17:32:17 +0000 (09:32 -0800)]
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
Because fib6_info_hw_flags_set() is called without any synchronization,
all accesses to gi6->offload, fi->trap and fi->offload_failed
need some basic protection like READ_ONCE()/WRITE_ONCE().
BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt
write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1:
fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230
nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline]
nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline]
nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline]
nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline]
nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
value changed: 0x22 -> 0x2a
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work
Fixes: 323fdfa3a82c ("IPv6: Add "offload failed" indication to routes") Fixes: 4fb4b908ee50 ("ipv6: Add "offload" and "trap" indications to routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Amit Cohen <amcohen@nvidia.com> Cc: Ido Schimmel <idosch@nvidia.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 16 Feb 2022 17:32:16 +0000 (09:32 -0800)]
ipv4: fix data races in fib_alias_hw_flags_set
fib_alias_hw_flags_set() can be used by concurrent threads,
and is only RCU protected.
We need to annotate accesses to following fields of struct fib_alias:
offload, trap, offload_failed
Because of READ_ONCE()WRITE_ONCE() limitations, make these
field u8.
BUG: KCSAN: data-race in fib_alias_hw_flags_set / fib_alias_hw_flags_set
read to 0xffff888134224a6a of 1 bytes by task 2013 on cpu 1:
fib_alias_hw_flags_set+0x28a/0x470 net/ipv4/fib_trie.c:1050
nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
process_scheduled_works kernel/workqueue.c:2370 [inline]
worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
write to 0xffff888134224a6a of 1 bytes by task 4872 on cpu 0:
fib_alias_hw_flags_set+0x2d5/0x470 net/ipv4/fib_trie.c:1054
nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
process_scheduled_works kernel/workqueue.c:2370 [inline]
worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
value changed: 0x00 -> 0x02
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4872 Comm: kworker/0:0 Not tainted 5.17.0-rc3-syzkaller-00188-g1d41d2e82623-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work
Fixes: 371b0fd7623c ("ipv4: Add "offload" and "trap" indications to routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220216173217.3792411-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mans Rullgard [Wed, 16 Feb 2022 20:48:18 +0000 (20:48 +0000)]
net: dsa: lan9303: add VLAN IDs to master device
If the master device does VLAN filtering, the IDs used by the switch
must be added for any frames to be received. Do this in the
port_enable() function, and remove them in port_disable().
Fixes: 3bbb5663f4fc ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220216204818.28746-1-mans@mansr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mans Rullgard [Wed, 16 Feb 2022 12:46:34 +0000 (12:46 +0000)]
net: dsa: lan9303: handle hwaccel VLAN tags
Check for a hwaccel VLAN tag on rx and use it if present. Otherwise,
use __skb_vlan_pop() like the other tag parsers do. This fixes the case
where the VLAN tag has already been consumed by the master.
Fixes: 3bbb5663f4fc ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220216124634.23123-1-mans@mansr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 17 Feb 2022 16:57:47 +0000 (08:57 -0800)]
mm: don't try to NUMA-migrate COW pages that have other uses
Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:
"All the details are in the bug, but the bottom line is that somehow,
this patch causes corruption when the numa balancing feature is
enabled AND we don't use process affinity AND we use GUP to pin pages
so our accelerator can DMA to/from system memory.
Either disabling numa balancing, using process affinity to bind to
specific numa-node or reverting this patch causes the bug to
disappear"
and Oded bisected the issue to commit a103ba5cc916 ("mm: do_wp_page()
simplification").
Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW. But it appears it
does. Suspicious.
However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical. It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.
The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.
Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.
Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information). Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.
The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless.
Seth Forshee [Thu, 17 Feb 2022 14:13:12 +0000 (08:13 -0600)]
vsock: remove vsock from connected table when connect is interrupted by a signal
vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.
Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.
Note for backporting: this patch requires dee01a9904fd ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y.
Since idm_base and nicpm_base are still optional resources not present
on all platforms, this breaks the driver for everything except Northstar
2 (which has both).
The same change was already reverted once with bb93c3c4fae3 ("net:
broadcom: fix a mistake about ioremap resource").
So let's do it again.
Fixes: 8b375ede3c51 ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[florian: Added comments to explain the resources are optional] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While examining is_ucounts_overlimit and reading the various messages
I realized that is_ucounts_overlimit fails to deal with counts that
may have wrapped.
Being wrapped should be a transitory state for counts and they should
never be wrapped for long, but it can happen so handle it.
ucounts: Move RLIMIT_NPROC handling after set_user
During set*id() which cred->ucounts to charge the the current process
to is not known until after set_cred_ucounts. So move the
RLIMIT_NPROC checking into a new helper flag_nproc_exceeded and call
flag_nproc_exceeded after set_cred_ucounts.
This is very much an arbitrary subset of the places where we currently
change the RLIMIT_NPROC accounting, designed to preserve the existing
logic.
Fixing the existing logic will be the subject of another series of
changes.
ucounts: Base set_cred_ucounts changes on the real user
Michal Koutný <mkoutny@suse.com> wrote:
> Tasks are associated to multiple users at once. Historically and as per
> setrlimit(2) RLIMIT_NPROC is enforce based on real user ID.
>
> The commit 96a6f980d813 ("Reimplement RLIMIT_NPROC on top of ucounts")
> made the accounting structure "indexed" by euid and hence potentially
> account tasks differently.
>
> The effective user ID may be different e.g. for setuid programs but
> those are exec'd into already existing task (i.e. below limit), so
> different accounting is moot.
>
> Some special setresuid(2) users may notice the difference, justifying
> this fix.
I looked at cred->ucount and it is only used for rlimit operations
that were previously stored in cred->user. Making the fact
cred->ucount can refer to a different user from cred->user a bug,
affecting all uses of cred->ulimit not just RLIMIT_NPROC.
Fix set_cred_ucounts to always use the real uid not the effective uid.
Further simplify set_cred_ucounts by noticing that set_cred_ucounts
somehow retained a draft version of the check to see if alloc_ucounts
was needed that checks the new->user and new->user_ns against the
current_real_cred(). Remove that draft version of the check.
All that matters for setting the cred->ucounts are the user_ns and uid
fields in the cred.
> It was reported that v5.14 behaves differently when enforcing
> RLIMIT_NPROC limit, namely, it allows one more task than previously.
> This is consequence of the commit 96a6f980d813 ("Reimplement
> RLIMIT_NPROC on top of ucounts") that missed the sharpness of
> equality in the forking path.
This can be fixed either by fixing the test or by moving the increment
to be before the test. Fix it my moving copy_creds which contains
the increment before is_ucounts_overlimit.
In the case of CLONE_NEWUSER the ucounts in the task_cred changes.
The function is_ucounts_overlimit needs to use the final version of
the ucounts for the new process. Which means moving the
is_ucounts_overlimit test after copy_creds is necessary.
Both the test in fork and the test in set_user were semantically
changed when the code moved to ucounts. The change of the test in
fork was bad because it was before the increment. The test in
set_user was wrong and the change to ucounts fixed it. So this
fix only restores the old behavior in one lcation not two.
rlimit: Fix RLIMIT_NPROC enforcement failure caused by capability calls in set_user
Solar Designer <solar@openwall.com> wrote:
> I'm not aware of anyone actually running into this issue and reporting
> it. The systems that I personally know use suexec along with rlimits
> still run older/distro kernels, so would not yet be affected.
>
> So my mention was based on my understanding of how suexec works, and
> code review. Specifically, Apache httpd has the setting RLimitNPROC,
> which makes it set RLIMIT_NPROC:
>
> https://httpd.apache.org/docs/2.4/mod/core.html#rlimitnproc
>
> The above documentation for it includes:
>
> "This applies to processes forked from Apache httpd children servicing
> requests, not the Apache httpd children themselves. This includes CGI
> scripts and SSI exec commands, but not any processes forked from the
> Apache httpd parent, such as piped logs."
>
> In code, there are:
>
> ./modules/generators/mod_cgid.c: ( (cgid_req.limits.limit_nproc_set) && ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/generators/mod_cgi.c: ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/filters/mod_ext_filter.c: rv = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC, conf->limit_nproc);
>
> For example, in mod_cgi.c this is in run_cgi_child().
>
> I think this means an httpd child sets RLIMIT_NPROC shortly before it
> execs suexec, which is a SUID root program. suexec then switches to the
> target user and execs the CGI script.
>
> Before 2a27b4654e7e, the setuid() in suexec would set the flag, and the
> target user's process count would be checked against RLIMIT_NPROC on
> execve(). After 2a27b4654e7e, the setuid() in suexec wouldn't set the
> flag because setuid() is (naturally) called when the process is still
> running as root (thus, has those limits bypass capabilities), and
> accordingly execve() would not check the target user's process count
> against RLIMIT_NPROC.
In commit 2a27b4654e7e ("set_user: add capability check when
rlimit(RLIMIT_NPROC) exceeds") capable calls were added to set_user to
make it more consistent with fork. Unfortunately because of call site
differences those capable calls were checking the credentials of the
user before set*id() instead of after set*id().
This breaks enforcement of RLIMIT_NPROC for applications that set the
rlimit and then call set*id() while holding a full set of
capabilities. The capabilities are only changed in the new credential
in security_task_fix_setuid().
The code in apache suexec appears to follow this pattern.
Commit 909cc4ae86f3 ("[PATCH] Fix two bugs with process limits
(RLIMIT_NPROC)") where this check was added describes the targes of this
capability check as:
2/ When a root-owned process (e.g. cgiwrap) sets up process limits and then
calls setuid, the setuid should fail if the user would then be running
more than rlim_cur[RLIMIT_NPROC] processes, but it doesn't. This patch
adds an appropriate test. With this patch, and per-user process limit
imposed in cgiwrap really works.
So the original use case of this check also appears to match the broken
pattern.
Restore the enforcement of RLIMIT_NPROC by removing the bad capable
checks added in set_user. This unfortunately restores the
inconsistent state the code has been in for the last 11 years, but
dealing with the inconsistencies looks like a larger problem.
Xin Long [Wed, 16 Feb 2022 05:20:52 +0000 (00:20 -0500)]
ping: fix the dif and sdif check in ping_lookup
When 'ping' changes to use PING socket instead of RAW socket by:
# sysctl -w net.ipv4.ping_group_range="0 100"
There is another regression caused when matching sk_bound_dev_if
and dif, RAW socket is using inet_iif() while PING socket lookup
is using skb->dev->ifindex, the cmd below fails due to this:
# ip link add dummy0 type dummy
# ip link set dummy0 up
# ip addr add 192.168.111.1/24 dev dummy0
# ping -I dummy0 192.168.111.1 -c1
The issue was also reported on:
https://github.com/iputils/iputils/issues/104
But fixed in iputils in a wrong way by not binding to device when
destination IP is on device, and it will cause some of kselftests
to fail, as Jianlin noticed.
This patch is to use inet(6)_iif and inet(6)_sdif to get dif and
sdif for PING socket, and keep consistent with RAW socket.
Fixes: cfce3383c7be ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Laibin Qiu [Sat, 22 Jan 2022 11:10:45 +0000 (19:10 +0800)]
block/wbt: fix negative inflight counter when remove scsi device
Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in
wbt_disable_default() when switch elevator to bfq. And when
we remove scsi device, wbt will be enabled by wbt_enable_default.
If it become false positive between wbt_wait() and wbt_track()
when submit write request.
The following is the scenario that triggered the problem.
T1 T2 T3
elevator_switch_mq
bfq_init_queue
wbt_disable_default <= Set
rwb->enable_state (OFF)
Submit_bio
blk_mq_make_request
rq_qos_throttle
<= rwb->enable_state (OFF)
scsi_remove_device
sd_remove
del_gendisk
blk_unregister_queue
elv_unregister_queue
wbt_enable_default
<= Set rwb->enable_state (ON)
q_qos_track
<= rwb->enable_state (ON)
^^^^^^ this request will mark WBT_TRACKED without inflight add and will
lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung.
Fix this by move wbt_enable_default() from elv_unregister to
bfq_exit_queue(). Only re-enable wbt when bfq exit.
Fixes: 19be9d608b322 ("blk-wbt: make sure throttle is enabled properly")
Remove oneline stale comment, and kill one oneshot local variable.
block: fix surprise removal for drivers calling blk_set_queue_dying
Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit b44b1c0ab7ff that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: b44b1c0ab7ff ("block: drain file system I/O on del_gendisk") Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
perf bpf: Defer freeing string after possible strlen() on it
This was detected by the gcc in Fedora Rawhide's gcc:
50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
1225 | *key_scan_pos += strlen(map_opt);
| ^~~~~~~~~~~~~~~
util/bpf-loader.c:1223:9: note: call to 'free' here
1223 | free(map_name);
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
So do the calculations on the pointer before freeing it.
Fixes: 68eaf1530bf9810b ("perf bpf-loader: Add missing '*' for key_scan_pos") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / kernel.git / log