Merge tag 'arch-cache-topo-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into driver-core-next
Sudeep writes:
cacheinfo and arch_topology updates for v5.20
These are updates to fix some discrepancies we have in the CPU topology
parsing from the device tree /cpu-map node and the divergence from the
behaviour on a ACPI enabled platform. The expectation is that both DT
and ACPI enabled systems must present consistent view of the CPU topology.
The current assignment of generated cluster count as the physical package
identifier for each CPU is wrong. The device tree bindings for CPU
topology supports sockets to infer the socket or physical package
identifier for a given CPU. It is now being made use of you address the
issue. These updates also assigns the cluster identifier as parsed from
the device tree cluster nodes within /cpu-map without support for
nesting of the clusters as there are no such reported/known platforms.
In order to be on par with ACPI PPTT physical package/socket support,
these updates also include support for socket nodes in /cpu-map.
The only exception is that the last level cache id information can be
inferred from the same ACPI PPTT while we need to parse CPU cache nodes
in the device tree. The cacheinfo changes here is to enable the re-use
of the cacheinfo to detect the cache attributes for all the CPU quite
early even before the scondardaries are booted so that the information
can be used to build the schedular domains especially the last level
cache(LLC).
* tag 'arch-cache-topo-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (21 commits)
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
arch_topology: Don't set cluster identifier as physical package identifier
arch_topology: Avoid parsing through all the CPUs once a outlier CPU is found
arch_topology: Check for non-negative value rather than -1 for IDs validity
arch_topology: Set thread sibling cpumask only within the cluster
arch_topology: Drop LLC identifier stash from the CPU topology
arm64: topology: Remove redundant setting of llc_id in CPU topology
arch_topology: Use the last level cache information from the cacheinfo
arch_topology: Add support to parse and detect cache attributes
cacheinfo: Align checks in cache_shared_cpu_map_{setup,remove} for readability
cacheinfo: Use cache identifiers to check if the caches are shared if available
cacheinfo: Allow early detection and population of cache attributes
cacheinfo: Add support to check if last level cache(LLC) is valid or shared
cacheinfo: Move cache_leaves_are_shared out of CONFIG_OF
cacheinfo: Add helper to access any cache index for a given CPU
cacheinfo: Use of_cpu_device_node_get instead cpu_dev->of_node
...
This is causing regression due to same kernfs_node getting
added multiple times in kernfs_notify_list so revert it until
safe way of using llist in this context is found.
ACPI: Remove the unused find_acpi_cpu_cache_topology()
The sole user of this find_acpi_cpu_cache_topology() was arm64 topology
which is now consolidated into the generic arch_topology without the need
of this function.
Drop the unused function find_acpi_cpu_cache_topology().
Link: https://lore.kernel.org/r/20220704101605.1318280-22-sudeep.holla@arm.com Cc: Rafael J. Wysocki <rafael@kernel.org> Reported-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
arch_topology: Warn that topology for nested clusters is not supported
We don't support the topology for clusters of CPU clusters while the
DT and ACPI bindings theoritcally support the same. Just warn about the
same so that it is clear to the users of arch_topology that the nested
clusters are not yet supported.
arch_topology: Add support for parsing sockets in /cpu-map
Finally let us add support for socket nodes in /cpu-map in the device
tree. Since this may not be present in all the old platforms and even
most of the existing platforms, we need to assume absence of the socket
node indicates that it is a single socket system and handle appropriately.
Also it is likely that most single socket systems skip to as the node
since it is optional.
arch_topology: Limit span of cpu_clustergroup_mask()
Currently the cluster identifier is not set on DT based platforms.
The reset or default value is -1 for all the CPUs. Once we assign the
cluster identifier values correctly, the cluster_sibling mask will be
populated and returned by cpu_clustergroup_mask() to contribute in the
creation of the CLS scheduling domain level, if SCHED_CLUSTER is
enabled.
To avoid topologies that will result in questionable or incorrect
scheduling domains, impose restrictions regarding the span of clusters,
as presented to scheduling domains building code: cluster_sibling should
not span more or the same CPUs as cpu_coregroup_mask().
This is needed in order to obtain a strict separation between the MC and
CLS levels, and maintain the same domains for existing platforms in
the presence of CONFIG_SCHED_CLUSTER, where the new cluster information
is redundant and irrelevant for the scheduler.
While previously the scheduling domain builder code would have removed MC
as redundant and kept CLS if SCHED_CLUSTER was enabled and the
cpu_coregroup_mask() and cpu_clustergroup_mask() spanned the same CPUs,
now CLS will be removed and MC kept.
arch_topology: Don't set cluster identifier as physical package identifier
Currently as we parse the CPU topology from /cpu-map node from the
device tree, we assign generated cluster count as the physical package
identifier for each CPU which is wrong.
The device tree bindings for CPU topology supports sockets to infer
the socket or physical package identifier for a given CPU. Since it is
fairly new and not supported on most of the old and existing systems, we
can assume all such systems have single socket/physical package.
Fix the physical package identifier to 0 by removing the assignment of
cluster identifier to the same.
arch_topology: Avoid parsing through all the CPUs once a outlier CPU is found
There is no point in looping through all the CPU's physical package
identifier to check if it is valid or not once a CPU which is outside
the topology(i.e. outlier CPU) is found.
Let us just break out of the loop early in such case.
arch_topology: Set thread sibling cpumask only within the cluster
Currently the cluster identifier is not set on the DT based platforms.
The reset or default value is -1 for all the CPUs. Once we assign the
cluster identifier values correctly that may result in getting the thread
siblings wrong as the core identifiers can be same for 2 different CPUs
belonging to 2 different cluster.
So, in order to get the thread sibling cpumasks correct, we need to
update them only if the cores they belong are in the same cluster within
the socket. Let us skip updation of the thread sibling cpumaks if the
cluster identifier doesn't match.
This change won't affect even if the cluster identifiers are not set
currently but will avoid any breakage once we set the same correctly.
arch_topology: Drop LLC identifier stash from the CPU topology
Since the cacheinfo LLC information is used directly in arch_topology,
there is no need to parse and store the LLC ID information only for
ACPI systems in the CPU topology.
Remove the redundant LLC ID from the generic CPU arch_topology
information.
arm64: topology: Remove redundant setting of llc_id in CPU topology
Since the cacheinfo LLC information is used directly in arch_topology,
there is no need to parse and fetch the LLC ID information only for
ACPI systems.
Just drop the redundant parsing and setting of llc_id in CPU topology
from ACPI PPTT.
arch_topology: Use the last level cache information from the cacheinfo
The cacheinfo is now initialised early along with the CPU topology
initialisation. Instead of relying on the LLC ID information parsed
separately only with ACPI PPTT elsewhere, migrate to use the similar
information from the cacheinfo.
This is generic for both DT and ACPI systems. The ACPI LLC ID information
parsed separately can now be removed from arch specific code.
arch_topology: Add support to parse and detect cache attributes
Currently ACPI populates just the minimum information about the last
level cache from PPTT in order to feed the same to build sched_domains.
Similar support for DT platforms is not present.
In order to enable the same, the entire cache hierarchy information can
be built as part of CPU topoplogy parsing both on ACPI and DT platforms.
Note that this change builds the cacheinfo early even on ACPI systems,
but the current mechanism of building llc_sibling mask remains unchanged.
cacheinfo: Align checks in cache_shared_cpu_map_{setup,remove} for readability
The checks to skip the CPU itself or no cacheinfo case are implemented
bit differently though the effect is exactly same. Just align the
implementation in both cache_shared_cpu_map_{setup,remove} just for
improved readability. No functional change.
cacheinfo: Use cache identifiers to check if the caches are shared if available
The cache identifiers is an optional property on most of the platforms.
The presence of one must be indicated by the CACHE_ID valid bit in the
attributes.
We can use the cache identifiers provided by the firmware to check if
any two cpus share the same cache instead of relying on the fw_token
generated and set in the OS.
cacheinfo: Allow early detection and population of cache attributes
Some architecture/platforms may need to setup cache properties very
early in the boot along with other cpu topologies so that all these
information can be used to build sched_domains which is used by the
scheduler.
Allow detect_cache_attributes to be called quite early during the boot.
cacheinfo: Add support to check if last level cache(LLC) is valid or shared
It is useful to have helper to check if the given two CPUs share last
level cache. We can do that check by comparing fw_token or by comparing
the cache ID. Currently we check just for fw_token as the cache ID is
optional.
This helper can be used to build the llc_sibling during arch specific
topology parsing and feeding information to the sched_domains. This also
helps to get rid of llc_id in the CPU topology as it is sort of duplicate
information.
Also add helper to check if the llc information in cacheinfo is valid
or not.
cacheinfo: Move cache_leaves_are_shared out of CONFIG_OF
cache_leaves_are_shared is already used even with ACPI and PPTT. It
checks if the cache leaves are the shared based on fw_token pointer.
However it is defined conditionally only if CONFIG_OF is enabled which
is wrong.
Move the function cache_leaves_are_shared out of CONFIG_OF and keep it
generic. It also handles the case where both OF and ACPI is not defined.
cacheinfo: Add helper to access any cache index for a given CPU
The cacheinfo for a given CPU at a given index is used at quite a few
places by fetching the base point for index 0 using the helper
per_cpu_cacheinfo(cpu) and offsetting it by the required index.
Instead, add another helper to fetch the required pointer directly and
use it to simplify and improve readability.
cacheinfo: Use of_cpu_device_node_get instead cpu_dev->of_node
The of_cpu_device_node_get takes care of fetching the CPU'd device node
either from cached cpu_dev->of_node if cpu_dev is initialised or uses
of_get_cpu_node to parse and fetch node if cpu_dev isn't available yet.
Just use of_cpu_device_node_get instead of getting the cpu device first
and then using cpu_dev->of_node for two reasons:
1. There is no other use of cpu_dev and can be simplified
2. It enabled the use detect_cache_attributes and hence cache_setup_of_node
much earlier before the CPUs are registered as devices.
ACPI: PPTT: Use table offset as fw_token instead of virtual address
There is need to use the cache sharing information quite early during
the boot before the secondary cores are up and running. The permanent
memory map for all the ACPI tables(via acpi_permanent_mmap) is turned
on in acpi_early_init() which is quite late for the above requirement.
As a result there is possibility that the ACPI PPTT gets mapped to
different virtual addresses. In such scenarios, using virtual address as
fw_token before the acpi_permanent_mmap is enabled results in different
fw_token for the same cache entity and hence wrong cache sharing
information will be deduced based on the same.
Instead of using virtual address, just use the table offset as the
unique firmware token for the caches. The same offset is used as
ACPI identifiers if the firmware has not set a valid one for other
entries in the ACPI PPTT.
Liang He [Tue, 28 Jun 2022 02:16:40 +0000 (10:16 +0800)]
firmware: Hold a reference for of_find_compatible_node()
In of_register_trusted_foundations(), we need to hold the reference
returned by of_find_compatible_node() and then use it to call
of_node_put() for refcount balance.
Saravana Kannan [Thu, 23 Jun 2022 08:03:43 +0000 (01:03 -0700)]
of: base: Avoid console probe delay when fw_devlink.strict=1
Commit 6a649ad15f44 ("driver core: Set fw_devlink.strict=1 by default")
enabled iommus and dmas dependency enforcement by default. On some
systems, this caused the console device's probe to get delayed until the
deferred_probe_timeout expires.
We need consoles to work as soon as possible, so mark the console device
node with FWNODE_FLAG_BEST_EFFORT so that fw_delink knows not to delay
the probe of the console device for suppliers without drivers. The
driver can then make the decision on where it can probe without those
suppliers or defer its probe.
Fixes: 6a649ad15f44 ("driver core: Set fw_devlink.strict=1 by default") Reported-by: Sascha Hauer <sha@pengutronix.de> Reported-by: Peng Fan <peng.fan@nxp.com> Tested-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220623080344.783549-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saravana Kannan [Thu, 23 Jun 2022 08:03:42 +0000 (01:03 -0700)]
driver core: fw_devlink: Allow firmware to mark devices as best effort
When firmware sets the FWNODE_FLAG_BEST_EFFORT flag for a fwnode,
fw_devlink will do a best effort ordering for that device where it'll
only enforce the probe/suspend/resume ordering of that device with
suppliers that have drivers. The driver of that device can then decide
if it wants to defer probe or probe without the suppliers.
This will be useful for avoid probe delays of the console device that
were caused by commit 6a649ad15f44 ("driver core: Set
fw_devlink.strict=1 by default").
Fixes: 6a649ad15f44 ("driver core: Set fw_devlink.strict=1 by default") Reported-by: Sascha Hauer <sha@pengutronix.de> Reported-by: Peng Fan <peng.fan@nxp.com> Tested-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220623080344.783549-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imran Khan [Wed, 15 Jun 2022 02:10:59 +0000 (12:10 +1000)]
kernfs: Replace global kernfs_open_file_mutex with hashed mutexes.
In current kernfs design a single mutex, kernfs_open_file_mutex, protects
the list of kernfs_open_file instances corresponding to a sysfs attribute.
So even if different tasks are opening or closing different sysfs files
they can contend on osq_lock of this mutex. The contention is more apparent
in large scale systems with few hundred CPUs where most of the CPUs have
running tasks that are opening, accessing or closing sysfs files at any
point of time.
Using hashed mutexes in place of a single global mutex, can significantly
reduce contention around global mutex and hence can provide better
scalability. Moreover as these hashed mutexes are not part of kernfs_node
objects we will not see any singnificant change in memory utilization of
kernfs based file systems like sysfs, cgroupfs etc.
Modify interface introduced in previous patch to make use of hashed
mutexes. Use kernfs_node address as hashing key.
Imran Khan [Wed, 15 Jun 2022 02:10:58 +0000 (12:10 +1000)]
kernfs: Introduce interface to access global kernfs_open_file_mutex.
This allows to change underlying mutex locking, without needing to change
the users of the lock. For example next patch modifies this interface to
use hashed mutexes in place of a single global kernfs_open_file_mutex.
Imran Khan [Wed, 15 Jun 2022 02:10:57 +0000 (12:10 +1000)]
kernfs: Change kernfs_notify_list to llist.
At present kernfs_notify_list is implemented as a singly linked
list of kernfs_node(s), where last element points to itself and
value of ->attr.next tells if node is present on the list or not.
Both addition and deletion to list happen under kernfs_notify_lock.
Change kernfs_notify_list to llist so that addition to list can heppen
locklessly.
Imran Khan [Wed, 15 Jun 2022 02:10:56 +0000 (12:10 +1000)]
kernfs: make ->attr.open RCU protected.
After removal of kernfs_open_node->refcnt in the previous patch,
kernfs_open_node_lock can be removed as well by making ->attr.open
RCU protected. kernfs_put_open_node can delegate freeing to ->attr.open
to RCU and other readers of ->attr.open can do so under rcu_read_(un)lock.
Zhang Wensheng [Wed, 22 Jun 2022 07:43:27 +0000 (15:43 +0800)]
driver core: fix potential deadlock in __driver_attach
In __driver_attach function, There are also AA deadlock problem,
like the commit 0eb2b5aea27d ("driver core: fix deadlock in
__device_attach").
stack like commit 0eb2b5aea27d ("driver core: fix deadlock in
__device_attach").
list below:
In __driver_attach function, The lock holding logic is as follows:
...
__driver_attach
if (driver_allows_async_probing(drv))
device_lock(dev) // get lock dev
async_schedule_dev(__driver_attach_async_helper, dev); // func
async_schedule_node
async_schedule_node_domain(func)
entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
/* when fail or work limit, sync to execute func, but
__driver_attach_async_helper will get lock dev as
will, which will lead to A-A deadlock. */
if (!entry || atomic_read(&entry_count) > MAX_WORK) {
func;
else
queue_work_node(node, system_unbound_wq, &entry->work)
device_unlock(dev)
As above show, when it is allowed to do async probes, because of
out of memory or work limit, async work is not be allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__driver_attach_async_helper getting lock dev.
Reproduce:
and it can be reproduce by make the condition
(if (!entry || atomic_read(&entry_count) > MAX_WORK)) untenable, like
below:
To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock.
This was already defined at stable/sysfs-devices-system-cpu with
the same description, as pointed by get_abi.pl:
Warning: /sys/devices/system/cpu/cpuX/topology/core_id is defined 2 times: Documentation/ABI/stable/sysfs-devices-system-cpu:38 Documentation/ABI/testing/sysfs-devices-system-cpu:69
Yangxi Xiang [Mon, 27 Jun 2022 12:04:09 +0000 (20:04 +0800)]
devtmpfs: fix the dangling pointer of global devtmpfsd thread
When the devtmpfs fails to mount, a dangling pointer still remains in
global. Specifically, the err variable is passed by a pointer to the
devtmpfsd. When the devtmpfsd exits, it sets the error and completes the
setup_done. In this situation, the thread pointer is not set to null.
After the devtmpfsd exited, the devtmpfs can wakes up the destroyed
devtmpfsd thread by wake_up_process if a device change event comes.
Revert "devcoredump: remove the useless gfp_t parameter in dev_coredumpv and dev_coredumpm"
This reverts commit 7c4030421622e2727304dcb92419755cf3a32f0b as it
causes build problems in linux-next. It needs to be reintroduced in a
way that can allow the api to evolve and not require a "flag day" to
catch all users.
Link: https://lore.kernel.org/r/20220623160723.7a44b573@canb.auug.org.au Cc: Duoming Zhou <duoming@zju.edu.cn> Cc: Brian Norris <briannorris@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "mwifiex: fix sleep in atomic context bugs caused by dev_coredumpv"
This reverts commit b1ac17142ca2cd45458d4385559d9d3ce3987150 as it
causes build problems in linux-next. It needs to be reintroduced in a
way that can allow the api to evolve and not require a "flag day" to
catch all users.
Link: https://lore.kernel.org/r/20220623160723.7a44b573@canb.auug.org.au Cc: Duoming Zhou <duoming@zju.edu.cn> Cc: Brian Norris <briannorris@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Duoming Zhou [Tue, 7 Jun 2022 03:26:26 +0000 (11:26 +0800)]
mwifiex: fix sleep in atomic context bugs caused by dev_coredumpv
There are sleep in atomic context bugs when uploading device dump
data in mwifiex. The root cause is that dev_coredumpv could not
be used in atomic contexts, because it calls dev_set_name which
include operations that may sleep. The call tree shows execution
paths that could lead to bugs:
This patch uses delayed work to replace timer and moves the operations
that may sleep into a delayed work in order to mitigate bugs, it was
tested on Marvell 88W8801 chip whose port is usb and the firmware is
usb8801_uapsta.bin. The following is the result after using delayed
work to replace timer.
[ 134.936453] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[ 135.043344] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end
Duoming Zhou [Tue, 7 Jun 2022 03:26:25 +0000 (11:26 +0800)]
devcoredump: remove the useless gfp_t parameter in dev_coredumpv and dev_coredumpm
The dev_coredumpv() and dev_coredumpm() could not be used in atomic
context, because they call kvasprintf_const() and kstrdup() with
GFP_KERNEL parameter. The process is shown below:
This patch removes gfp_t parameter of dev_coredumpv() and dev_coredumpm()
and changes the gfp_t parameter of kzalloc() in dev_coredumpm() to
GFP_KERNEL in order to show they could not be used in atomic context.
Saravana Kannan [Wed, 1 Jun 2022 07:07:04 +0000 (00:07 -0700)]
iommu/of: Delete usage of driver_deferred_probe_check_state()
Now that fw_devlink=on and fw_devlink.strict=1 by default and fw_devlink
supports iommu DT properties, the execution will never get to the point
where driver_deferred_probe_check_state() is called before the supplier
has probed successfully or before deferred probe timeout has expired.
Saravana Kannan [Wed, 1 Jun 2022 07:07:03 +0000 (00:07 -0700)]
driver core: Set fw_devlink.strict=1 by default
Now that deferred_probe_timeout is non-zero by default, fw_devlink will
never permanently block the probing of devices. It'll try its best to
probe the devices in the right order and then finally let devices probe
even if their suppliers don't have any drivers.
Saravana Kannan [Wed, 1 Jun 2022 07:07:01 +0000 (00:07 -0700)]
net: ipconfig: Relax fw_devlink if we need to mount a network rootfs
If there are network devices that could probe without some of their
suppliers probing and those network devices are needed to mount a
network rootfs, then fw_devlink=on might break that usecase by blocking
the network devices from probing by the time IP auto config starts.
So, if no network devices are available when IP auto config is enabled
and we have a network rootfs, make sure fw_devlink doesn't block the
probing of any device that has a driver and then retry finding a network
device.
Saravana Kannan [Wed, 1 Jun 2022 07:07:00 +0000 (00:07 -0700)]
driver core: Add wait_for_init_devices_probe helper function
Some devices might need to be probed and bound successfully before the
kernel boot sequence can finish and move on to init/userspace. For
example, a network interface might need to be bound to be able to mount
a NFS rootfs.
With fw_devlink=on by default, some of these devices might be blocked
from probing because they are waiting on a optional supplier that
doesn't have a driver. While fw_devlink will eventually identify such
devices and unblock the probing automatically, it might be too late by
the time it unblocks the probing of devices. For example, the IP4
autoconfig might timeout before fw_devlink unblocks probing of the
network interface.
This function is available to temporarily try and probe all devices that
have a driver even if some of their suppliers haven't been added or
don't have drivers.
The drivers can then decide which of the suppliers are optional vs
mandatory and probe the device if possible. By the time this function
returns, all such "best effort" probes are guaranteed to be completed.
If a device successfully probes in this mode, we delete all fw_devlink
discovered dependencies of that device where the supplier hasn't yet
probed successfully because they have to be optional dependencies.
This also means that some devices that aren't needed for init and could
have waited for their optional supplier to probe (when the supplier's
module is loaded later on) would end up probing prematurely with limited
functionality. So call this function only when boot would fail without
it.
Saravana Kannan [Wed, 1 Jun 2022 07:06:59 +0000 (00:06 -0700)]
net: mdio: Delete usage of driver_deferred_probe_check_state()
Now that fw_devlink=on by default and fw_devlink supports interrupt
properties, the execution will never get to the point where
driver_deferred_probe_check_state() is called before the supplier has
probed successfully or before deferred probe timeout has expired.
Saravana Kannan [Wed, 1 Jun 2022 07:06:58 +0000 (00:06 -0700)]
pinctrl: devicetree: Delete usage of driver_deferred_probe_check_state()
Now that fw_devlink=on by default and fw_devlink supports
"pinctrl-[0-8]" property, the execution will never get to the point
where driver_deferred_probe_check_state() is called before the supplier
has probed successfully or before deferred probe timeout has expired.
Saravana Kannan [Wed, 1 Jun 2022 07:06:57 +0000 (00:06 -0700)]
PM: domains: Delete usage of driver_deferred_probe_check_state()
Now that fw_devlink=on by default and fw_devlink supports
"power-domains" property, the execution will never get to the point
where driver_deferred_probe_check_state() is called before the supplier
has probed successfully or before deferred probe timeout has expired.
Linus Torvalds [Mon, 6 Jun 2022 00:14:03 +0000 (17:14 -0700)]
Merge tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file descriptor fix from Al Viro:
"Fix for breakage in #work.fd this window"
* tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the breakage in close_fd_get_file() calling conventions change
Linus Torvalds [Sun, 5 Jun 2022 18:51:48 +0000 (11:51 -0700)]
bluetooth: don't use bitmaps for random flag accesses
The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.
It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32. It shoudln't have been a bitmap in the first
place. The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.
The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.
So just use a regular integer.
In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).
That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit a1a19b185fa0 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.
Al Viro [Sun, 5 Jun 2022 18:01:42 +0000 (14:01 -0400)]
fix the breakage in close_fd_get_file() calling conventions change
It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table. New variant doesn't, and callers need to be adjusted.
Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com Fixes: 8d392c99b321 ("Unify the primitives for file descriptor closing") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sun, 5 Jun 2022 18:00:43 +0000 (11:00 -0700)]
Merge tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX fix from Thomas Gleixner:
"A single fix for x86/SGX to prevent that memory which is allocated for
an SGX enclave is accounted to the wrong memory control group"
* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Set active memcg prior to shmem allocation
Linus Torvalds [Sun, 5 Jun 2022 17:55:23 +0000 (10:55 -0700)]
Merge tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode updates from Thomas Gleixner:
- Disable late microcode loading by default. Unless the HW people get
their act together and provide a required minimum version in the
microcode header for making a halfways informed decision its just
lottery and broken.
- Warn and taint the kernel when microcode is loaded late
- Remove the old unused microcode loader interface
- Remove a redundant perf callback from the microcode loader
* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove unnecessary perf callback
x86/microcode: Taint and warn on late loading
x86/microcode: Default-disable late loading
x86/microcode: Rip out the OLD_INTERFACE
Linus Torvalds [Sun, 5 Jun 2022 17:53:41 +0000 (10:53 -0700)]
Merge tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Thomas Gleixner:
"A set of small x86 cleanups:
- Remove unused headers in the IDT code
- Kconfig indendation and comment fixes
- Fix all 'the the' typos in one go instead of waiting for bots to
fix one at a time"
* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix all occurences of the "the the" typo
x86/idt: Remove unused headers
x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
Linus Torvalds [Sun, 5 Jun 2022 17:47:06 +0000 (10:47 -0700)]
Merge tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clockevent/clocksource updates from Thomas Gleixner:
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power
states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
clocksource/drivers/timer-sun5i: Convert to SPDX identifier
clocksource/drivers/timer-sun4i: Convert to SPDX identifier
clocksource/drivers/pistachio: Convert to SPDX identifier
clocksource/drivers/orion: Convert to SPDX identifier
clocksource/drivers/lpc32xx: Convert to SPDX identifier
clocksource/drivers/digicolor: Convert to SPDX identifier
clocksource/drivers/armada-370-xp: Convert to SPDX identifier
clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
clocksource/drivers/jcore: Convert to SPDX identifier
clocksource/drivers/bcm_kona: Convert to SPDX identifier
clocksource/drivers/sp804: Avoid error on multiple instances
clocksource/drivers/riscv: Events are stopped during CPU suspend
clocksource/drivers/ixp4xx: Drop boardfile probe path
dt-bindings: timer: Add compatible for Mediatek MT8186
Linus Torvalds [Sun, 5 Jun 2022 17:40:31 +0000 (10:40 -0700)]
Merge tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
- Make the ICL event constraints match reality
- Remove a unused local variable
* tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Remove unused local variable
perf/x86/intel: Fix event constraints for ICL
Linus Torvalds [Sun, 5 Jun 2022 16:45:27 +0000 (09:45 -0700)]
Merge tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
Linus Torvalds [Sun, 5 Jun 2022 16:12:28 +0000 (09:12 -0700)]
Merge tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
Linus Torvalds [Sun, 5 Jun 2022 16:06:03 +0000 (09:06 -0700)]
Merge tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
Linus Torvalds [Sun, 5 Jun 2022 02:07:15 +0000 (19:07 -0700)]
Merge tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pathname updates from Al Viro:
"Several cleanups in fs/namei.c"
* tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
namei: cleanup double word in comment
get rid of dead code in legitimize_root()
fs/namei.c:reserve_stack(): tidy up the call of try_to_unlazy()
Linus Torvalds [Sun, 5 Jun 2022 02:00:05 +0000 (19:00 -0700)]
Merge tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount handling updates from Al Viro:
"Cleanups (and one fix) around struct mount handling.
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't hit
those particular failure exits without fault injection, though"
* tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move mount-related externs from fs.h to mount.h
blob_to_mnt(): kern_unmount() is needed to undo kern_mount()
m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb...
linux/mount.h: trim includes
uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)
Linus Torvalds [Sun, 5 Jun 2022 01:52:00 +0000 (18:52 -0700)]
Merge tag 'pull-18-rc1-work.fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file descriptor updates from Al Viro.
- Descriptor handling cleanups
* tag 'pull-18-rc1-work.fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Unify the primitives for file descriptor closing
fs: remove fget_many and fput_many interface
io_uring_enter(): don't leave f.flags uninitialized
Linus Torvalds [Sun, 5 Jun 2022 00:42:33 +0000 (17:42 -0700)]
Merge tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Nine cifs/smb3 client fixes.
Includes DFS fixes, some cleanup of leagcy SMB1 code, duplicated
message cleanup and a double free and deadlock fix"
* tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix uninitialized pointer in error case in dfs_cache_get_tgt_share
cifs: skip trailing separators of prefix paths
cifs: update internal module number
cifs: version operations for smb20 unneeded when legacy support disabled
cifs: do not build smb1ops if legacy support is disabled
cifs: fix potential deadlock in direct reclaim
cifs: when extending a file with falloc we should make files not-sparse
cifs: remove repeated debug message on cifs_put_smb_ses()
cifs: fix potential double free during failed mount
Masahiro Yamada [Mon, 30 May 2022 09:01:38 +0000 (18:01 +0900)]
modpost: simplify mod->name allocation
mod->name is set to the ELF filename with the suffix ".o" stripped.
The current code calls strdup() and free() to manipulate the string,
but a simpler approach is to pass new_module() with the name length
subtracted by 2.
Also, check if the passed filename ends with ".o" before stripping it.
The current code blindly chops the suffix:
tmp[strlen(tmp) - 2] = '\0'
It will cause buffer under-run if strlen(tmp) < 2;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Masahiro Yamada [Sat, 28 May 2022 15:47:04 +0000 (00:47 +0900)]
kbuild: factor out the common objtool arguments
scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups
for the objtool arguments.
It was difficult to factor out them because all the vmlinux build rules
were written in a shell script. It is somewhat tedious to touch the two
files every time a new objtool option is supported.
To reduce the code duplication, move the objtool for vmlinux.o into
scripts/Makefile.vmlinux_o. Then, move the common macros to Makefile.lib
so they are shared between Makefile.build and Makefile.vmlinux_o.
Linus Torvalds [Sat, 4 Jun 2022 21:04:27 +0000 (14:04 -0700)]
Merge tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- bitmap: optimize bitmap_weight() usage, from me
- lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
Carvalho Chehab
- include/linux/find: Fix documentation, from Anna-Maria Behnsen
- bitmap: fix conversion from/to fix-sized arrays, from me
- bitmap: Fix return values to be unsigned, from Kees Cook
It has been in linux-next for at least a week with no problems.
* tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits)
nodemask: Fix return values to be unsigned
bitmap: Fix return values to be unsigned
KVM: x86: hyper-v: replace bitmap_weight() with hweight64()
KVM: x86: hyper-v: fix type of valid_bank_mask
ia64: cleanup remove_siblinginfo()
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate
lib/bitmap: add test for bitmap_{from,to}_arr64
lib: add bitmap_{from,to}_arr64
lib/bitmap: extend comment for bitmap_(from,to)_arr32()
include/linux/find: Fix documentation
lib/bitmap.c make bitmap_print_bitmask_to_buf parseable
MAINTAINERS: add cpumask and nodemask files to BITMAP_API
arch/x86: replace nodes_weight with nodes_empty where appropriate
mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate
clocksource: replace cpumask_weight with cpumask_empty in clocksource.c
genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate
irq: mips: replace cpumask_weight with cpumask_empty where appropriate
drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate
arch/x86: replace cpumask_weight with cpumask_empty where appropriate
...
Linus Torvalds [Sat, 4 Jun 2022 20:50:23 +0000 (13:50 -0700)]
Merge tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc architecture updates from Helge Deller:
"A fix to prevent crash at bootup if CONFIG_SCHED_MC is enabled, and
add auto-detection of primary graphics card for framebuffer driver"
* tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/stifb: Keep track of hardware path of graphics card
parisc/stifb: Implement fb_is_primary_device()
parisc: fix a crash with multicore scheduler
Linus Torvalds [Sat, 4 Jun 2022 20:42:53 +0000 (13:42 -0700)]
Merge tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"Two cleanup patches for Xen related code and (more important) an
update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
down"
* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: replace xen_remap() with memremap()
MAINTAINERS: Update Xen maintainership
xen: switch gnttab_end_foreign_access() to take a struct page pointer
Linus Torvalds [Sat, 4 Jun 2022 20:33:12 +0000 (13:33 -0700)]
Merge tag 'perf-tools-for-v5.19-2022-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Synthesize task events for pre-existing threads when using 'perf lock
--threads', as we need to show task names.
- Fix unwinding with ld.lld (>= version 10.0) linked objects, where
.eh_frame_hdr and .text are in different PT_LOAD program headers,
which makes perf record --call-graph dwarf fail with such obkects.
- Check if 'perf record' hangs in the ARM SPE (Statistical Profiling
Extensions) 'perf test' entry when recording a workload with forks.
- Trace physical address for Arm SPE events, needed for 'perf c2c' to
locate the memory node for samples.
- Fix sorting in percent_rmt_hitm_cmp() in 'perf c2c'.
- Further support for Intel hybrid systems in the evlist and 'perf
record' code.
- Update IBM s/390 vendor event JSON tables.
- Add metrics (JSON) for Intel Sapphirerapids.
- Update metrics for Intel Alderlake.
- Correct typo of sysf 'event_source' directory in the documentation.
* tag 'perf-tools-for-v5.19-2022-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf vendor events intel: Update metrics for Alderlake
perf vendor events intel: Add metrics for Sapphirerapids
perf c2c: Fix sorting in percent_rmt_hitm_cmp()
perf mem: Trace physical address for Arm SPE events
perf list: Update event description for IBM zEC12/zBC12 to latest level
perf list: Update event description for IBM z196/z114 to latest level
perf list: Update event description for IBM z15 to latest level
perf list: Update event description for IBM z14 to latest level
perf list: Update event description for IBM z13 to latest level
perf list: Update event description for IBM z10 to latest level
perf list: Add IBM z16 event description for s390
perf record: Support sample-read topdown metric group for hybrid platforms
perf lock: Change to synthesize task events
perf unwind: Fix segbase for ld.lld linked objects
perf test arm-spe: Check if perf-record hangs when recording workload with forks
perf docs: Correct typo of event_sources
perf evlist: Extend arch_evsel__must_be_in_group to support hybrid systems
Helge Deller [Thu, 2 Jun 2022 11:50:44 +0000 (13:50 +0200)]
parisc/stifb: Implement fb_is_primary_device()
Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.
Linus Torvalds [Sat, 4 Jun 2022 03:01:25 +0000 (20:01 -0700)]
Merge tag 'gpio-fixes-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use the correct register for regcache sync in gpio-pca953x
- remove unused and potentially harmful code from gpio-adp5588
- MAINTAINERS update
* tag 'gpio-fixes-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: adp5588: Remove support for platform setup and teardown callbacks
gpio: pca953x: use the correct register address to do regcache sync
MAINTAINERS: Update Intel GPIO (PMIC and PCH) to Supported
MAINTAINERS: Update GPIO ACPI library to Supported
Linus Torvalds [Sat, 4 Jun 2022 02:57:25 +0000 (19:57 -0700)]
Merge tag 'regulator-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix that came in during the merge window, fixing an error in the
examples in the DT binding documentation for mt6315"
* tag 'regulator-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6315-regulator: fix invalid allowed mode
* tag 'ntfs3_for_5.19' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: provide block_invalidate_folio to fix memory leak
fs/ntfs3: Fix invalid free in log_replay
fs/ntfs3: Update valid size if -EIOCBQUEUED
fs/ntfs3: Check new size for limits
fs/ntfs3: Fix fiemap + fix shrink file size (to remove preallocated space)
fs/ntfs3: In function ntfs_set_acl_ex do not change inode->i_mode if called from function ntfs_init_acl
fs/ntfs3: Optimize locking in ntfs_save_wsl_perm
fs/ntfs3: Update i_ctime when xattr is added
fs/ntfs3: Restore ntfs_xattr_get_acl and ntfs_xattr_set_acl functions
fs/ntfs3: Keep preallocated only if option prealloc enabled
fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()'
Linus Torvalds [Fri, 3 Jun 2022 23:13:25 +0000 (16:13 -0700)]
Merge tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace_stop cleanups from Eric Biederman:
"While looking at the ptrace problems with PREEMPT_RT and the problems
Peter Zijlstra was encountering with ptrace in his freezer rewrite I
identified some cleanups to ptrace_stop that make sense on their own
and move make resolving the other problems much simpler.
The biggest issue is the habit of the ptrace code to change
task->__state from the tracer to suppress TASK_WAKEKILL from waking up
the tracee. No other code in the kernel does that and it is straight
forward to update signal_wake_up and friends to make that unnecessary.
Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
on the fact that all stopped states except the special stop states can
tolerate spurious wake up and recover their state.
The state of stopped and traced tasked is changed to be stored in
task->jobctl as well as in task->__state. This makes it possible for
the freezer to recover tasks in these special states, as well as
serving as a general cleanup. With a little more work in that
direction I believe TASK_STOPPED can learn to tolerate spurious wake
ups and become an ordinary stop state.
The TASK_TRACED state has to remain a special state as the registers
for a process are only reliably available when the process is stopped
in the scheduler. Fundamentally ptrace needs acess to the saved
register values of a task.
There are bunch of semi-random ptrace related cleanups that were found
while looking at these issues.
One cleanup that deserves to be called out is from commit 312a79ecbf5d
("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This
makes a change that is technically user space visible, in the handling
of what happens to a tracee when a tracer dies unexpectedly. According
to our testing and our understanding of userspace nothing cares that
spurious SIGTRAPs can be generated in that case"
* tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
ptrace: Always take siglock in ptrace_resume
ptrace: Don't change __state
ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
ptrace: Document that wait_task_inactive can't fail
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
signal: Use lockdep_assert_held instead of assert_spin_locked
ptrace: Remove arch_ptrace_attach
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
signal: Replace __group_send_sig_info with send_signal_locked
signal: Rename send_signal send_signal_locked
Linus Torvalds [Fri, 3 Jun 2022 23:03:05 +0000 (16:03 -0700)]
Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 169a5179aab6 ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 14549687236b ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
Linus Torvalds [Fri, 3 Jun 2022 22:54:57 +0000 (15:54 -0700)]
Merge tag 'per-namespace-ipc-sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ipc sysctl namespace updates from Eric Biederman:
"This updates the ipc sysctls so that they are fundamentally per ipc
namespace. Previously these sysctls depended upon a hack to simulate
being per ipc namespace by looking up the ipc namespace in read or
write. With this set of changes the ipc sysctls are registered per ipc
namespace and open looks up the ipc namespace.
Not only does this series of changes ensure the traditional binding at
open time happens, but it sets a foundation for being able to relax
the permission checks to allow a user namspace root to change the ipc
sysctls for an ipc namespace that the user namespace root requires. To
do this requires the ipc namespace to be known at open time"
* tag 'per-namespace-ipc-sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ipc: Remove extra braces
ipc: Check permissions for checkpoint_restart sysctls at open time
ipc: Remove extra1 field abuse to pass ipc namespace
ipc: Use the same namespace to modify and validate
ipc: Store ipc sysctls in the ipc namespace
ipc: Store mqueue sysctls in the ipc namespace
Linus Torvalds [Fri, 3 Jun 2022 22:46:03 +0000 (15:46 -0700)]
firmware_loader: enable XZ by default if compressed support is enabled
Commit 4e9974ca6046 ("firmware: Add the support for ZSTD-compressed
firmware files") added support for ZSTD compression, but in the process
also made the previously default XZ compression a config option.
That means that anybody who upgrades their kernel and does a
make oldconfig
to update their configuration, will end up without the XZ compression
that the configuration used to have.
Add the 'default y' to make sure this doesn't happen.
The whole compression question should probably be improved upon, since
it is now possible to "enable" compression in the kernel config but not
enable any actual compression algorithm, which makes it all very
useless. It makes no sense to ask Kconfig questions that enable
situations that are nonsensical like that.
This at least fixes the immediate problem of a kernel update resulting
in a nonbootable machine because of a missed option.
Fixes: 4e9974ca6046 ("firmware: Add the support for ZSTD-compressed firmware files") Cc: Takashi Iwai <tiwai@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 3 Jun 2022 21:42:24 +0000 (14:42 -0700)]
Merge tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
"JFFS2:
- Fixes for a memory leak
UBI:
- Fixes for fastmap (UAF, high CPU usage)
UBIFS:
- Minor cleanups"
* tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: ubi_create_volume: Fix use-after-free when volume creation failed
ubi: fastmap: Check wl_pool for free peb before wear leveling
ubi: fastmap: Fix high cpu usage of ubi_bgt by making sure wl_pool not empty
ubifs: Use NULL instead of using plain integer as pointer
ubifs: Simplify the return expression of run_gc()
jffs2: fix memory leak in jffs2_do_fill_super
jffs2: Use kzalloc instead of kmalloc/memset
Linus Torvalds [Fri, 3 Jun 2022 21:35:14 +0000 (14:35 -0700)]
Merge tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Various cleanups and fixes: xterm, serial line, time travel
- Set ARCH_HAS_GCOV_PROFILE_ALL
* tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix out-of-bounds read in LDT setup
um: chan_user: Fix winch_tramp() return value
um: virtio_uml: Fix broken device handling in time-travel
um: line: Use separate IRQs per line
um: Enable ARCH_HAS_GCOV_PROFILE_ALL
um: Use asm-generic/dma-mapping.h
um: daemon: Make default socket configurable
um: xterm: Make default terminal emulator configurable
Linus Torvalds [Fri, 3 Jun 2022 21:24:44 +0000 (14:24 -0700)]
Merge tag 'devicetree-fixes-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fixes for unevaluatedProperties warnings.
These were missed to due to a bug in dtschema which is now fixed. The
changes involve either adding missing properties or removing spurious
properties from examples.
- Update several Qualcomm binding maintainer email addresses
- Fix typo in imx8mp-media-blk-ctrl example
- Fix fixed string pattern in qcom,smd
- Correct the order of 'reg' entries in Xilinx PCI binding
* tag 'devicetree-fixes-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: mtd: spi-nand: Add spi-peripheral-props.yaml reference
dt-bindings: memory-controllers: ingenic: Split out child node properties
dt-bindings: net/dsa: Add spi-peripheral-props.yaml references
dt-bindings: PCI: apple: Add missing 'power-domains' property
dt-bindings: Update Sibi Sankar's email address
dt-bindings: clock: Update my email address
dt-bindings: PCI: xilinx-cpm: Fix reg property order
dt-bindings: net: Fix unevaluatedProperties warnings in examples
dt-bindings: PCI: socionext,uniphier-pcie: Add missing child interrupt controller
dt-bindings: usb: snps,dwc3: Add missing 'dma-coherent' property
dt-bindings: soc: imx8mp-media-blk-ctrl: Fix DT example
dt-bindings: soc: qcom,smd: do not use pattern for simple rpm-requests string
Linus Torvalds [Fri, 3 Jun 2022 21:20:28 +0000 (14:20 -0700)]
Merge tag 'arm-multiplatform-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull yet more ARM multiplatform updates from Arnd Bergmann:
"This is the third and final bit of the multiplatform conversion for
ARMv5, finishing off OMAP1. One patch enables the common-clk
interface, and the other ones does the Kconfig change.
These were waiting on a few dependencies to trickle in for common-clk,
and the last one of those was in the USB tree"
* tag 'arm-multiplatform-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap1: enable multiplatform
ARM: OMAP1: clock: Convert to CCF
projects / kernel.git / log