Linus Torvalds [Sat, 13 Nov 2021 19:31:07 +0000 (11:31 -0800)]
Merge tag 'ceph-for-5.16-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"One notable change here is that async creates and unlinks introduced
in 5.7 are now enabled by default. This should greatly speed up things
like rm, tar and rsync. To opt out, wsync mount option can be used.
Other than that we have a pile of bug fixes all across the filesystem
from Jeff, Xiubo and Kotresh and a metrics infrastructure rework from
Luis"
* tag 'ceph-for-5.16-rc1' of git://github.com/ceph/ceph-client:
ceph: add a new metric to keep track of remote object copies
libceph, ceph: move ceph_osdc_copy_from() into cephfs code
ceph: clean-up metrics data structures to reduce code duplication
ceph: split 'metric' debugfs file into several files
ceph: return the real size read when it hits EOF
ceph: properly handle statfs on multifs setups
ceph: shut down mount on bad mdsmap or fsmap decode
ceph: fix mdsmap decode when there are MDS's beyond max_mds
ceph: ignore the truncate when size won't change with Fx caps issued
ceph: don't rely on error_string to validate blocklisted session.
ceph: just use ci->i_version for fscache aux info
ceph: shut down access to inode when async create fails
ceph: refactor remove_session_caps_cb
ceph: fix auth cap handling logic in remove_session_caps_cb
ceph: drop private list from remove_session_caps_cb
ceph: don't use -ESTALE as special return code in try_get_cap_refs
ceph: print inode numbers instead of pointer values
ceph: enable async dirops by default
libceph: drop ->monmap and err initialization
ceph: convert to noop_direct_IO
Linus Torvalds [Sat, 13 Nov 2021 19:27:02 +0000 (11:27 -0800)]
Merge tag 'erofs-for-5.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- fix unsafe pagevec reuse which could cause unexpected behaviors
- get rid of the unused DELAYEDALLOC strategy that has been replaced by
TRYALLOC
* tag 'erofs-for-5.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove useless cache strategy of DELAYEDALLOC
erofs: fix unsafe pagevec reuse of hooked pclusters
Linus Torvalds [Sat, 13 Nov 2021 19:20:22 +0000 (11:20 -0800)]
Merge tag 'f2fs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've applied relatively small number of patches which
fix subtle corner cases mainly, while introducing a new mount option
to be able to fragment the disk intentionally for performance tests.
Enhancements:
- add a mount option to fragmente on-disk layout to understand the
performance
- support direct IO for multi-partitions
- add a fault injection of dquot_initialize
Bug fixes:
- address some lockdep complaints
- fix a deadlock issue with quota
- fix a memory tuning condition
- fix compression condition to improve the ratio
- fix disabling compression on the non-empty compressed file
- invalidate cached pages before IPU/DIO writes
And, we've added some minor clean-ups as usual"
* tag 'f2fs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix UAF in f2fs_available_free_memory
f2fs: invalidate META_MAPPING before IPU/DIO write
f2fs: support fault injection for dquot_initialize()
f2fs: fix incorrect return value in f2fs_sanity_check_ckpt()
f2fs: compress: disallow disabling compress on non-empty compressed file
f2fs: compress: fix overwrite may reduce compress ratio unproperly
f2fs: multidevice: support direct IO
f2fs: introduce fragment allocation mode mount option
f2fs: replace snprintf in show functions with sysfs_emit
f2fs: include non-compressed blocks in compr_written_block
f2fs: fix wrong condition to trigger background checkpoint correctly
f2fs: fix to use WHINT_MODE
f2fs: fix up f2fs_lookup tracepoints
f2fs: set SBI_NEED_FSCK flag when inconsistent node block found
f2fs: introduce excess_dirty_threshold()
f2fs: avoid attaching SB_ACTIVE flag during mount
f2fs: quota: fix potential deadlock
f2fs: should use GFP_NOFS for directory inodes
Linus Torvalds [Sat, 13 Nov 2021 19:15:15 +0000 (11:15 -0800)]
Merge tag 'netfs-folio-20211111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs, 9p, afs and ceph (partial) foliation from David Howells:
"This converts netfslib, 9p and afs to use folios. It also partially
converts ceph so that it uses folios on the boundaries with netfslib.
To help with this, a couple of folio helper functions are added in the
first two patches.
These patches don't touch fscache and cachefiles as I intend to remove
all the code that deals with pages directly from there. Only nfs and
cifs are using the old fscache I/O API now. The new API uses iov_iter
instead.
Thanks to Jeff Layton, Dominique Martinet and AuriStor for testing and
retesting the patches"
* tag 'netfs-folio-20211111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use folios in directory handling
netfs, 9p, afs, ceph: Use folios
folio: Add a function to get the host inode for a folio
folio: Add a function to change the private data attached to a folio
Linus Torvalds [Sat, 13 Nov 2021 18:45:17 +0000 (10:45 -0800)]
Merge tag 'coccinelle-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
- Update MAINTAINERS information (mailing list, web page, etc).
- Add a semantic patch from Wen Yang to check for do_div calls that may
cause truncation, motivated by commit 956c971fa4ca ("sched: Fix
possible divide by zero in avg_atom() calculation")
* tag 'coccinelle-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
coccinelle: update Coccinelle entry
coccinelle: semantic patch to check for inappropriate do_div() calls
Linus Torvalds [Sat, 13 Nov 2021 18:27:50 +0000 (10:27 -0800)]
Merge tag 'selinux-pr-20211112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Unfortunately I need to request a revert for two LSM/SELinux patches
that came in via the network tree. The two patches in question add a
new SCTP/LSM hook as well as an SELinux implementation of that LSM
hook. The short version of "why?" is in the commit description of the
revert patch, but I'll copy-n-paste the important bits below to save
some time for the curious:
... Unfortunately these two patches were merged without proper
review (the Reviewed-by and Tested-by tags from Richard Haines
were for previous revisions of these patches that were
significantly different) and there are outstanding objections from
the SELinux maintainers regarding these patches.
Work is currently ongoing to correct the problems identified in
the reverted patches, as well as others that have come up during
review, but it is unclear at this point in time when that work
will be ready for inclusion in the mainline kernel. In the
interest of not keeping objectionable code in the kernel for
multiple weeks, and potentially a kernel release, we are reverting
the two problematic patches.
As usual with these things there is plenty of context to go with this
and I'll try to do my best to provide that now. This effort started
with a report of SCTP client side peel-offs not working correctly with
SELinux, Ondrej Mosnacek put forth a patch which he believed properly
addressed the problem but upon review by the netdev folks Xin Long
described some additional issues and submitted an improved patchset
for review. The SELinux folks reviewed Xin Long's initial patchset and
suggested some changes which resulted in a second patchset (v2) from
Xin Long; this is the patchset that is currently in your tree.
Unfortunately this v2 patchset from Xin Long was merged before it had
spent even just 24 hours on the mailing lists during the early days of
the merge window, a time when many of us were busy doing verification
of the newly released v5.15 kernel as well final review and testing of
our v5.16 pull requests. Making matters worse, upon reviewing the v2
patchset there were both changes which were found objectionable by
SELinux standards as well as additional outstanding SCTP/SELinux
interaction problems. At this point we did two things: resumed working
on a better fix for the SCTP/SELinux issue(s) - thank you Ondrej - and
we asked the networking folks to revert the v2 patchset.
The revert request was obviously rejected, but at the time I believed
it was just going to be an issue for linux-next; I wasn't expecting
something this significant that was merged into the networking tree
during the merge window to make it into your tree in the same window,
yet as of last night that is exactly what happened. While we continue
to try and resolve the SCTP/SELinux problem I am asking once again to
revert the v2 patches and not ship the current
security_sctp_assoc_established() hook in a v5.16-rcX kernel. If I was
confident that we could solve these issues in a week, maybe two, I
would refrain from asking for the revert but our current estimate is
for a minimum of two weeks for the next patch revision. With the
likelihood of additional delays due to normal patch review follow-up
and/or holidays it seems to me that the safest course of action is to
revert the patch both to try and keep some objectionable code out of a
release kernel and limit the chances of any new breakages from such a
change. While the SCTP/SELinux code in v5.15 and earlier has problems,
they are known problems, and I'd like to try and avoid creating new
and different problems while we work to fix things properly.
One final thing to mention: Xin Long's v2 patchset consisted of four
patches, yet this revert is for only the last two. We see the first
two patches as good, reasonable, and not likely to cause an issue. In
an attempt to create a cleaner revert patch we suggest leaving the
first two patches in the tree as they are currently"
* tag 'selinux-pr-20211112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
net,lsm,selinux: revert the security_sctp_assoc_established() hook
Linus Torvalds [Sat, 13 Nov 2021 18:11:51 +0000 (10:11 -0800)]
Merge tag 'trace-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three tracing fixes:
- Make local osnoise_instances static
- Copy just actual size of histogram strings
- Properly check missing operands in histogram expressions"
* tag 'trace-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/histogram: Fix check for missing operands in an expression
tracing/histogram: Do not copy the fixed-size char array field over the field size
tracing/osnoise: Make osnoise_instances static
Linus Torvalds [Sat, 13 Nov 2021 18:01:10 +0000 (10:01 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"New x86 features:
- Guest API and guest kernel support for SEV live migration
- SEV and SEV-ES intra-host migration
Bugfixes and cleanups for x86:
- Fix misuse of gfn-to-pfn cache when recording guest steal time /
preempted status
- Fix selftests on APICv machines
- Fix sparse warnings
- Fix detection of KVM features in CPUID
- Cleanups for bogus writes to MSR_KVM_PV_EOI_EN
- Fixes and cleanups for MSR bitmap handling
- Cleanups for INVPCID
- Make x86 KVM_SOFT_MAX_VCPUS consistent with other architectures
Bugfixes for ARM:
- Fix finalization of host stage2 mappings
- Tighten the return value of kvm_vcpu_preferred_target()
- Make sure the extraction of ESR_ELx.EC is limited to architected
bits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: SEV: unify cgroup cleanup code for svm_vm_migrate_from
KVM: x86: move guest_pv_has out of user_access section
KVM: x86: Drop arbitrary KVM_SOFT_MAX_VCPUS
KVM: Move INVPCID type check from vmx and svm to the common kvm_handle_invpcid()
KVM: VMX: Add a helper function to retrieve the GPR index for INVPCID, INVVPID, and INVEPT
KVM: nVMX: Clean up x2APIC MSR handling for L2
KVM: VMX: Macrofy the MSR bitmap getters and setters
KVM: nVMX: Handle dynamic MSR intercept toggling
KVM: nVMX: Query current VMCS when determining if MSR bitmaps are in use
KVM: x86: Don't update vcpu->arch.pv_eoi.msr_val when a bogus value was written to MSR_KVM_PV_EOI_EN
KVM: x86: Rename kvm_lapic_enable_pv_eoi()
KVM: x86: Make sure KVM_CPUID_FEATURES really are KVM_CPUID_FEATURES
KVM: x86: Add helper to consolidate core logic of SET_CPUID{2} flows
kvm: mmu: Use fast PF path for access tracking of huge pages when possible
KVM: x86/mmu: Properly dereference rcu-protected TDP MMU sptep iterator
KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active
kvm: x86: Convert return type of *is_valid_rdpmc_ecx() to bool
KVM: x86: Fix recording of guest steal time / preempted status
selftest: KVM: Add intra host migration tests
selftest: KVM: Add open sev dev helper
...
Linus Torvalds [Sat, 13 Nov 2021 17:18:06 +0000 (09:18 -0800)]
Merge tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Add PCI automatic error recovery.
- Fix tape driver timer initialization broken during timers api
cleanup.
- Fix bogus CPU measurement counters values on CPUs offlining.
- Check the validity of subchanel before reading other fields in the
schib in cio code.
* tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: check the subchannel validity for dev_busid
s390/cpumf: cpum_cf PMU displays invalid value after hotplug remove
s390/tape: fix timer initialization in tape_std_assign()
s390/pci: implement minimal PCI error recovery
PCI: Export pci_dev_lock()
s390/pci: implement reset_slot for hotplug slot
s390/pci: refresh function handle in iomap
Linus Torvalds [Sat, 13 Nov 2021 17:11:33 +0000 (09:11 -0800)]
Merge tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull more MIPS updates from Thomas Bogendoerfer:
- Config updates for BMIPS platform
- Build fixes
- Makefile cleanups
* tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: decompressor: do not copy source files while building
MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression
MIPS: fix duplicated slashes for Platform file path
MIPS: fix *-pkg builds for loongson2ef platform
PCI: brcmstb: Allow building for BMIPS_GENERIC
MIPS: BMIPS: Enable PCI Kconfig
MIPS: VDSO: remove -nostdlib compiler flag
mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
MIPS: Update bmips_stb_defconfig
MIPS: Allow modules to set board_be_handler
vm86_32.c:109 is: "BUG_ON(!vm86 || !vm86->user_vm86)"
When trying to understand the failure Brian Gerst pointed out[2] that
the code does not need protection against vm86->user_vm86 being NULL.
The copy_from_user code will already handles that case if the address
is going to fault.
Looking futher I realized that if we care about not allowing struct
vm86plus_struct at address 0 it should be do_sys_vm86 (the system
call) that does the filtering. Not way down deep when the emulation
has completed in save_v86_state.
So let's just remove the silly case of attempting to filter a
userspace address with a BUG_ON. Existing userspace can't break and
it won't make the kernel any more attackable as the userspace access
helpers will handle it, if it isn't a good userspace pointer.
I have run the reproducer the fuzzer gave me before I made this change
and it reproduced, and after I made this change and I have not seen
the reported failure. So it does looks like this fixes the reported
issue.
[1] https://lkml.kernel.org/r/20211112074030.GB19820@xsang-OptiPlex-9020
[2] https://lkml.kernel.org/r/CAMzpN2jkK5sAv-Kg_kVnCEyVySiqeTdUORcC=AdG1gV6r8nUew@mail.gmail.com Suggested-by: Brian Gerst <brgerst@gmail.com> Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Kalesh Singh [Fri, 12 Nov 2021 19:13:24 +0000 (11:13 -0800)]
tracing/histogram: Fix check for missing operands in an expression
If a binary operation is detected while parsing an expression string,
the operand strings are deduced by splitting the experssion string at
the position of the detected binary operator. Both operand strings are
sub-strings (can be empty string) of the expression string but will
never be NULL.
Currently a NULL check is used for missing operands, fix this by
checking for empty strings instead.
Link: https://lkml.kernel.org/r/20211112191324.1302505-1-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Fixes: dfdca7209867 ("tracing: Fix operator precedence for hist triggers expression") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Fri, 12 Nov 2021 16:02:08 +0000 (01:02 +0900)]
tracing/histogram: Do not copy the fixed-size char array field over the field size
Do not copy the fixed-size char array field of the events over
the field size. The histogram treats char array as a string and
there are 2 types of char array in the event, fixed-size and
dynamic string. The dynamic string (__data_loc) field must be
null terminated, but the fixed-size char array field may not
be null terminated (not a string, but just a data).
In that case, histogram can copy the data after the field.
This uses the original field size for fixed-size char array
field to restrict the histogram not to access over the original
field size.
Linus Torvalds [Fri, 12 Nov 2021 20:25:50 +0000 (12:25 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
scsi: scsi_debug: Don't call kcalloc() if size arg is zero
scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
scsi: scsi_ioctl: Validate command size
scsi: ufs: ufshpb: Properly handle max-single-cmd
scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
scsi: sr: Remove duplicate assignment
scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
scsi: ufs: ufs-exynos: Factor out priv data init
scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
scsi: ufs: ufs-exynos: Add setup_clocks callback
scsi: ufs: ufs-exynos: Add refclkout_stop control
scsi: ufs: ufs-exynos: Simplify drv_data retrieval
scsi: ufs: ufs-exynos: Change pclk available max value
scsi: ufs: Add quirk to enable host controller without PH configuration
scsi: ufs: Add quirk to handle broken UIC command
...
Linus Torvalds [Fri, 12 Nov 2021 20:22:06 +0000 (12:22 -0800)]
Merge tag 'pwm/for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set is mostly small fixes and cleanups, so more of a janitorial
update for this cycle"
* tag 'pwm/for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: vt8500: Rename pwm_busy_wait() to make it obviously driver-specific
dt-bindings: pwm: tpu: Add R-Car M3-W+ device tree bindings
dt-bindings: pwm: tpu: Add R-Car V3U device tree bindings
pwm: pwm-samsung: Trigger manual update when disabling PWM
pwm: visconti: Simplify using devm_pwmchip_add()
pwm: samsung: Describe driver in Kconfig
pwm: Make it explicit that pwm_apply_state() might sleep
pwm: Add might_sleep() annotations for !CONFIG_PWM API functions
pwm: atmel: Drop unused header
Linus Torvalds [Fri, 12 Nov 2021 20:17:30 +0000 (12:17 -0800)]
Merge tag 'sound-fix-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for 5.16-rc1, notably for a few regressions that
were found in 5.15 and pre-rc1:
- revert of the unification of SG-buffer helper functions on x86 and
the relevant fix
- regression fixes for mmap after the recent code refactoring
- two NULL dereference fixes in HD-audio controller driver
- UAF fixes in ALSA timer core
- a few usual HD-audio and FireWire quirks"
* tag 'sound-fix-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: fireworks: add support for Loud Onyx 1200f quirk
ALSA: hda: fix general protection fault in azx_runtime_idle
ALSA: hda: Free card instance properly at probe errors
ALSA: hda/realtek: Add quirk for HP EliteBook 840 G7 mute LED
ALSA: memalloc: Remove a stale comment
ALSA: synth: missing check for possible NULL after the call to kstrdup
ALSA: memalloc: Use proper SG helpers for noncontig allocations
ALSA: pci: rme: Fix unaligned buffer addresses
ALSA: firewire-motu: add support for MOTU Track 16
ALSA: PCM: Fix NULL dereference at mmap checks
ALSA: hda/realtek: Add quirk for ASUS UX550VE
ALSA: timer: Unconditionally unlink slave instances, too
ALSA: memalloc: Catch call with NULL snd_dma_buffer pointer
Revert "ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type"
ALSA: hda/realtek: Add a quirk for Acer Spin SP513-54N
ALSA: firewire-motu: add support for MOTU Traveler mk3
ALSA: hda/realtek: Headset fixup for Clevo NH77HJQ
ALSA: timer: Fix use-after-free problem
Linus Torvalds [Fri, 12 Nov 2021 20:11:07 +0000 (12:11 -0800)]
Merge tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"I missed a drm-misc-next pull for the main pull last week. It wasn't
that major and isn't the bulk of this at all. This has a bunch of
fixes all over, a lot for amdgpu and i915.
bridge:
- HPD improvments for lt9611uxc
- eDP aux-bus support for ps8640
- LVDS data-mapping selection support
ttm:
- remove huge page functionality (needs reworking)
- fix a race condition during BO eviction
nouveau:
- various code style changes
- refcount fix
- device removal fixes
- protect client list with a mutex
- fix CE0 address calculation
i915:
- DP rates related fixes
- Revert disabling dual eDP that was causing state readout problems
- put the cdclk vtables in const data
- Fix DVO port type for older platforms
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
- CCS FBs related fixes
- Fix recursive lock in GuC submission
- Revert guc_id from i915_request tracepoint
- Build fix around dmabuf
amdgpu:
- GPU reset fix
- Aldebaran fix
- Yellow Carp fixes
- DCN2.1 DMCUB fix
- IOMMU regression fix for Picasso
- DSC display fixes
- BPC display calculation fixes
- Other misc display fixes
- Don't allow partial copy from user for DC debugfs
- SRIOV fixes
- GFX9 CSB pin count fix
- Various IP version check fixes
- DP 2.0 fixes
- Limit DCN1 MPO fix to DCN1
amdkfd:
- SVM fixes
- Fix gfx version for renoir
- Reset fixes
udl:
- timeout fix
imx:
- circular locking fix
virtio:
- NULL ptr deref fix"
* tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits)
drm/ttm: Double check mem_type of BO while eviction
drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64)
drm/amdgpu: drop jpeg IP initialization in SRIOV case
drm/amd/display: reject both non-zero src_x and src_y only for DCN1x
drm/amd/display: Add callbacks for DMUB HPD IRQ notifications
drm/amd/display: Don't lock connection_mutex for DMUB HPD
drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends
drm/amdkfd: Fix retry fault drain race conditions
drm/amdkfd: lower the VAs base offset to 8KB
drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly
drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov
drm/amdgpu: fix uvd crash on Polaris12 during driver unloading
drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages
drm/i915/fb: Fix rounding error in subsampled plane size calculation
drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown()
drm/locking: fix __stack_depot_* name conflict
drm/virtio: Fix NULL dereference error in virtio_gpu_poll
drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support()
drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs
drm/amd/amdkfd: Don't sent command to HWS on kfd reset
...
Linus Torvalds [Fri, 12 Nov 2021 19:44:31 +0000 (11:44 -0800)]
Merge tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This includes new ioctls to get and set parameters and in particular
the backup switch mode that is needed for some RTCs to actually enable
the backup voltage (and have a useful RTC).
The same interface can also be used to get the actual features
supported by the RTC so userspace has a better way than trying and
failing.
Summary:
Subsystem:
- Add new ioctl to get and set extra RTC parameters, this includes
backup switch mode
- Expose available features to userspace, in particular, when alarmas
have a resolution of one minute instead of a second.
- Let the core handle those alarms with a minute resolution
New driver:
- MSTAR MSC313 RTC
Drivers:
- Add SPI ID table where necessary
- Add BSM support for rv3028, rv3032 and pcf8523
- s3c: set RTC range
- rx8025: set range, implement .set_offset and .read_offset"
* tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: rx8025: use .set_offset/.read_offset
rtc: rx8025: use rtc_add_group
rtc: rx8025: clear RTC_FEATURE_ALARM when alarm are not supported
rtc: rx8025: set range
rtc: rx8025: let the core handle the alarm resolution
rtc: rx8025: switch to devm_rtc_allocate_device
rtc: ab8500: let the core handle the alarm resolution
rtc: ab-eoz9: support UIE when available
rtc: ab-eoz9: use RTC_FEATURE_UPDATE_INTERRUPT
rtc: rv3032: let the core handle the alarm resolution
rtc: s35390a: let the core handle the alarm resolution
rtc: handle alarms with a minute resolution
rtc: pcf85063: silence cppcheck warning
rtc: rv8803: fix writing back ctrl in flag register
rtc: s3c: Add time range
rtc: s3c: Extract read/write IO into separate functions
rtc: s3c: Remove usage of devm_rtc_device_register()
rtc: tps80031: Remove driver
rtc: sun6i: Allow probing without an early clock provider
rtc: pcf8523: add BSM support
...
Sasha Levin [Fri, 12 Nov 2021 15:16:02 +0000 (10:16 -0500)]
tools/lib/lockdep: drop liblockdep
TL;DR: While a tool like liblockdep is useful, it probably doesn't
belong within the kernel tree.
liblockdep attempts to reuse kernel code both directly (by directly
building the kernel's lockdep code) as well as indirectly (by using
sanitized headers). This makes liblockdep an integral part of the
kernel.
It also makes liblockdep quite unique: while other userspace code might
use sanitized headers, it generally doesn't attempt to use kernel code
directly which means that changes on the kernel side of things don't
affect (and break) it directly.
All our workflows and tooling around liblockdep don't support this
uniqueness. Changes that go into the kernel code aren't validated to not
break in-tree userspace code.
liblockdep ended up being very fragile, breaking over and over, to the
point that living in the same tree as the lockdep code lost most of it's
value.
liblockdep should continue living in an external tree, syncing with
the kernel often, in a controllable way.
Linus Torvalds [Fri, 12 Nov 2021 18:56:25 +0000 (10:56 -0800)]
thermal: int340x: fix build on 32-bit targets
Commit 9ebf1a5db1fc ("thermal/drivers/int340x: processor_thermal: Suppot
64 bit RFIM responses") started using 'readq()' to read 64-bit status
responses from the int340x hardware.
That's all fine and good, but on 32-bit targets a 64-bit 'readq()' is
ambiguous, since it's no longer an atomic access. Some hardware might
require 64-bit accesses, and other hardware might want low word first or
high word first.
It's quite likely that the driver isn't relevant in a 32-bit environment
any more, and there's a patch floating around to just make it depend on
X86_64, but let's make it buildable on x86-32 anyway.
The driver previously just read the low 32 bits, so the hardware
certainly is ok with 32-bit reads, and in a little-endian environment
the low word first model is the natural one.
So just add the include for the 'io-64-nonatomic-lo-hi.h' version.
Fixes: 9ebf1a5db1fc ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses") Reported-by: Jakub Kicinski <kuba@kernel.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Moore [Fri, 12 Nov 2021 17:07:02 +0000 (12:07 -0500)]
net,lsm,selinux: revert the security_sctp_assoc_established() hook
This patch reverts two prior patches, a6e7d15e7e57
("security: implement sctp_assoc_established hook in selinux") and bffaa716212f ("security: add sctp_assoc_established hook"), which
create the security_sctp_assoc_established() LSM hook and provide a
SELinux implementation. Unfortunately these two patches were merged
without proper review (the Reviewed-by and Tested-by tags from
Richard Haines were for previous revisions of these patches that
were significantly different) and there are outstanding objections
from the SELinux maintainers regarding these patches.
Work is currently ongoing to correct the problems identified in the
reverted patches, as well as others that have come up during review,
but it is unclear at this point in time when that work will be ready
for inclusion in the mainline kernel. In the interest of not keeping
objectionable code in the kernel for multiple weeks, and potentially
a kernel release, we are reverting the two problematic patches.
Paolo Bonzini [Fri, 12 Nov 2021 09:02:24 +0000 (04:02 -0500)]
KVM: SEV: unify cgroup cleanup code for svm_vm_migrate_from
Use the same cleanup code independent of whether the cgroup to be
uncharged and unref'd is the source or the destination cgroup. Use a
bool to track whether the destination cgroup has been charged, which also
fixes a bug in the error case: the destination cgroup must be uncharged
only if it does not match the source.
Fixes: 1167986334b9 ("KVM: SEV: Add support for SEV intra host migration") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 12 Nov 2021 07:53:41 +0000 (02:53 -0500)]
KVM: x86: move guest_pv_has out of user_access section
When UBSAN is enabled, the code emitted for the call to guest_pv_has
includes a call to __ubsan_handle_load_invalid_value. objtool
complains that this call happens with UACCESS enabled; to avoid
the warning, pull the calls to user_access_begin into both arms
of the "if" statement, after the check for guest_pv_has.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Thu, 11 Nov 2021 23:10:18 +0000 (15:10 -0800)]
Merge tag 'pci-v5.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Revert conversion to struct device.driver instead of struct
pci_dev.driver.
The device.driver is set earlier, and using it caused the PCI core to
call driver PM entry points before .probe() and after .remove(), when
the driver isn't prepared.
This caused NULL pointer dereferences in i2c_designware_pci and
probably other driver issues"
* tag 'pci-v5.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Use to_pci_driver() instead of pci_dev->driver"
Revert "PCI: Remove struct pci_dev->driver"
Damien Le Moal [Thu, 11 Nov 2021 03:03:27 +0000 (12:03 +0900)]
libata: libahci: declare ahci_shost_attr_group as static
ahci_shost_attr_group is referenced only in drivers/ata/libahci.c.
Declare it as static.
Fixes: 861227e80bcc ("scsi: ata: Switch to attribute groups") Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
Damien Le Moal [Mon, 8 Nov 2021 23:45:25 +0000 (08:45 +0900)]
libata: add horkage for missing Identify Device log
ACS-3 introduced the ATA Identify Device Data log as mandatory. A
warning message currently signals to the user if a device does not
report supporting this log page in the log directory page, regardless
of the ATA version of the device. Furthermore, this warning will appear
for all attempts at accessing this missing log page during device
revalidation.
Since it is useless to constantly access the log directory and warn
about this lack of support once we have discovered that the device
does not support this log page, introduce the horkage flag
ATA_HORKAGE_NO_ID_DEV_LOG to mark a device as lacking support for
the Identify Device Data log page. Set this flag when
ata_log_supported() returns false in ata_identify_page_supported().
The warning is printed only if the device ATA level is 10 or above
(ACS-3 or above), and only once on device scan. With this flag set, the
log directory page is not accessed again to test for Identify Device
Data log page support.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Linus Torvalds [Thu, 11 Nov 2021 23:00:04 +0000 (15:00 -0800)]
Merge tag 'kcsan.2021.11.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
"This contains initialization fixups, testing improvements, addition of
instruction pointer to data-race reports, and scoped data-race checks"
* tag 'kcsan.2021.11.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: selftest: Cleanup and add missing __init
kcsan: Move ctx to start of argument list
kcsan: Support reporting scoped read-write access type
kcsan: Start stack trace with explicit location if provided
kcsan: Save instruction pointer for scoped accesses
kcsan: Add ability to pass instruction pointer of access to reporting
kcsan: test: Fix flaky test case
kcsan: test: Use kunit_skip() to skip tests
kcsan: test: Defer kcsan_test_init() after kunit initialization
Linus Torvalds [Thu, 11 Nov 2021 22:47:32 +0000 (14:47 -0800)]
Merge tag 'apparmor-pr-2021-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features
- use per file locks for transactional queries
- update policy management capability checks to work with LSM stacking
Bug Fixes:
- check/put label on apparmor_sk_clone_security()
- fix error check on update of label hname
- fix introspection of of task mode for unconfined tasks
Cleanups:
- avoid -Wempty-body warning
- remove duplicated 'Returns:' comments
- fix doc warning
- remove unneeded one-line hook wrappers
- use struct_size() helper in kzalloc()
- fix zero-length compiler warning in AA_BUG()
- file.h: delete duplicated word
- delete repeated words in comments
- remove repeated declaration"
* tag 'apparmor-pr-2021-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: remove duplicated 'Returns:' comments
apparmor: remove unneeded one-line hook wrappers
apparmor: Use struct_size() helper in kzalloc()
apparmor: fix zero-length compiler warning in AA_BUG()
apparmor: use per file locks for transactional queries
apparmor: fix doc warning
apparmor: Remove the repeated declaration
apparmor: avoid -Wempty-body warning
apparmor: Fix internal policy capable check for policy management
apparmor: fix error check
security: apparmor: delete repeated words in comments
security: apparmor: file.h: delete duplicated word
apparmor: switch to apparmor to internal capable check for policy management
apparmor: update policy capable checks to use a label
apparmor: fix introspection of of task mode for unconfined tasks
apparmor: check/put label on apparmor_sk_clone_security()
Linus Torvalds [Thu, 11 Nov 2021 22:31:47 +0000 (14:31 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"The post-linux-next material.
7 patches.
Subsystems affected by this patch series (all mm): debug,
slab-generic, migration, memcg, and kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: add kasan mode messages when kasan init
mm: unexport {,un}lock_page_memcg
mm: unexport folio_memcg_{,un}lock
mm/migrate.c: remove MIGRATE_PFN_LOCKED
mm: migrate: simplify the file-backed pages validation when migrating its mapping
mm: allow only SLUB on PREEMPT_RT
mm/page_owner.c: modify the type of argument "order" in some functions
Linus Torvalds [Thu, 11 Nov 2021 22:22:05 +0000 (14:22 -0800)]
Merge tag 'm68knommu-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"Only two changes.
One removes the now unused CONFIG_MCPU32 symbol. The other sets a
default for the CONFIG_MEMORY_RESERVE config symbol (this aids
scripting and other automation) so you don't interactively get asked
for a value at configure time.
Summary:
- remove unused CONFIG_MCPU32 symbol
- default CONFIG_MEMORY_RESERVE value (for scripting)"
* tag 'm68knommu-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: Remove MCPU32 config symbol
m68k: set a default value for MEMORY_RESERVE
Robert reported a NULL pointer dereference caused by the PCI core
(local_pci_probe()) calling the i2c_designware_pci driver's
.runtime_resume() method before the .probe() method. i2c_dw_pci_resume()
depends on initialization done by i2c_dw_pci_probe().
Prior to ae52a83bda6c ("PCI: Use to_pci_driver() instead of
pci_dev->driver"), pci_pm_runtime_resume() avoided calling the
.runtime_resume() method because pci_dev->driver had not been set yet.
ae52a83bda6c and 73d8b4c6fc7c ("PCI: Remove struct pci_dev->driver"),
removed pci_dev->driver, replacing it by device->driver, which *has* been
set by this time, so pci_pm_runtime_resume() called the .runtime_resume()
method when it previously had not.
Revert 73d8b4c6fc7c ("PCI: Remove struct pci_dev->driver"), which is needed
to revert ae52a83bda6c ("PCI: Use to_pci_driver() instead of
pci_dev->driver").
ae52a83bda6c caused a NULL pointer dereference reported by Robert Święcki.
Details in the revert of that commit.
Linus Torvalds [Thu, 11 Nov 2021 18:16:33 +0000 (10:16 -0800)]
Merge tag 'trace-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two locking fixes:
- Add mutex protection to ring_buffer_reset()
- Fix deadlock in modify_ftrace_direct_multi()"
* tag 'trace-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/direct: Fix lockup in modify_ftrace_direct_multi
ring-buffer: Protect ring_buffer_reset() from reentrancy
- net: fix possible NULL deref in sock_reserve_memory
- amt: fix error return code in amt_init(); fix stopping the
workqueue
- ax88796c: use the correct ioctl callback
Previous releases - always broken:
- bpf: stop caching subprog index in the bpf_pseudo_func insn
- security: fixups for the security hooks in sctp
- nfc: add necessary privilege flags in netlink layer, limit
operations to admin only
- vsock: prevent unnecessary refcnt inc for non-blocking connect
- net/smc: fix sk_refcnt underflow on link down and fallback
- nfnetlink_queue: fix OOB when mac header was cleared
- can: j1939: ignore invalid messages per standard
- bpf, sockmap:
- fix race in ingress receive verdict with redirect to self
- fix incorrect sk_skb data_end access when src_reg = dst_reg
- strparser, and tls are reusing qdisc_skb_cb and colliding
- ethtool: fix ethtool msg len calculation for pause stats
- vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to
access an unregistering real_dev
- udp6: make encap_rcv() bump the v6 not v4 stats
- drv: prestera: add explicit padding to fix m68k build
- drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge
- drv: mvpp2: fix wrong SerDes reconfiguration order
Misc & small latecomers:
- ipvs: auto-load ipvs on genl access
- mctp: sanity check the struct sockaddr_mctp padding fields
- libfs: support RENAME_EXCHANGE in simple_rename()
- avoid double accounting for pure zerocopy skbs"
* tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits)
selftests/net: udpgso_bench_rx: fix port argument
net: wwan: iosm: fix compilation warning
cxgb4: fix eeprom len when diagnostics not implemented
net: fix premature exit from NAPI state polling in napi_disable()
net/smc: fix sk_refcnt underflow on linkdown and fallback
net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer()
gve: fix unmatched u64_stats_update_end()
net: ethernet: lantiq_etop: Fix compilation error
selftests: forwarding: Fix packet matching in mirroring selftests
vsock: prevent unnecessary refcnt inc for nonblocking connect
net: marvell: mvpp2: Fix wrong SerDes reconfiguration order
net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory
net: stmmac: allow a tc-taprio base-time of zero
selftests: net: test_vxlan_under_vrf: fix HV connectivity test
net: hns3: allow configure ETS bandwidth of all TCs
net: hns3: remove check VF uc mac exist when set by PF
net: hns3: fix some mac statistics is always 0 in device version V2
net: hns3: fix kernel crash when unload VF while it is being reset
net: hns3: sync rx ring head in echo common pull
net: hns3: fix pfc packet number incorrect after querying pfc parameters
...
Linus Torvalds [Thu, 11 Nov 2021 17:44:29 +0000 (09:44 -0800)]
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single fix for 5.16-rc1 to resolve a build problem that came
in through the coresight tree (and as such came in through the
char/misc tree merge in the 5.16-rc1 merge window).
It resolves a build problem with 'allmodconfig' on arm64 and is acked
by the proper subsystem maintainers. It has been in linux-next all
week with no reported problems"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
arm64: cpufeature: Export this_cpu_has_cap helper
Linus Torvalds [Thu, 11 Nov 2021 17:40:15 +0000 (09:40 -0800)]
Merge tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small reverts and fixes for USB drivers for issues that
came up during the 5.16-rc1 merge window.
These include:
- two reverts of xhci and USB core patches that are causing problems
in many systems.
- xhci 3.1 enumeration delay fix for systems that were having
problems.
All three of these have been in linux-next all week with no reported
issues"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay
Revert "usb: core: hcd: Add support for deferring roothub registration"
Revert "xhci: Set HCD flag to defer primary roothub registration"
Alistair Popple [Thu, 11 Nov 2021 04:32:40 +0000 (20:32 -0800)]
mm/migrate.c: remove MIGRATE_PFN_LOCKED
MIGRATE_PFN_LOCKED is used to indicate to migrate_vma_prepare() that a
source page was already locked during migrate_vma_collect(). If it
wasn't then the a second attempt is made to lock the page. However if
the first attempt failed it's unlikely a second attempt will succeed,
and the retry adds complexity. So clean this up by removing the retry
and MIGRATE_PFN_LOCKED flag.
Destination pages are also meant to have the MIGRATE_PFN_LOCKED flag
set, but nothing actually checks that.
Link: https://lkml.kernel.org/r/20211025041608.289017-1-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baolin Wang [Thu, 11 Nov 2021 04:32:37 +0000 (20:32 -0800)]
mm: migrate: simplify the file-backed pages validation when migrating its mapping
There is no need to validate the file-backed page's refcount before
trying to freeze the page's expected refcount, instead we can rely on
the folio_ref_freeze() to validate if the page has the expected refcount
before migrating its mapping.
Moreover we are always under the page lock when migrating the page
mapping, which means nowhere else can remove it from the page cache, so
we can remove the xas_load() validation under the i_pages lock.
Ingo Molnar [Thu, 11 Nov 2021 04:32:33 +0000 (20:32 -0800)]
mm: allow only SLUB on PREEMPT_RT
Memory allocators may disable interrupts or preemption as part of the
allocation and freeing process. For PREEMPT_RT it is important that
these sections remain deterministic and short and therefore don't depend
on the size of the memory to allocate/ free or the inner state of the
algorithm.
Until v3.12-RT the SLAB allocator was an option but involved several
changes to meet all the requirements. The SLUB design fits better with
PREEMPT_RT model and so the SLAB patches were dropped in the 3.12-RT
patchset. Comparing the two allocator, SLUB outperformed SLAB in both
throughput (time needed to allocate and free memory) and the maximal
latency of the system measured with cyclictest during hackbench.
SLOB was never evaluated since it was unlikely that it preforms better
than SLAB. During a quick test, the kernel crashed with SLOB enabled
during boot.
Disable SLAB and SLOB on PREEMPT_RT.
[bigeasy@linutronix.de: commit description]
Link: https://lkml.kernel.org/r/20211015210336.gen3tib33ig5q2md@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paolo Bonzini [Thu, 11 Nov 2021 15:52:26 +0000 (10:52 -0500)]
Merge branch 'kvm-sev-move-context' into kvm-master
Add support for AMD SEV and SEV-ES intra-host migration support. Intra
host migration provides a low-cost mechanism for userspace VMM upgrades.
In the common case for intra host migration, we can rely on the normal
ioctls for passing data from one VMM to the next. SEV, SEV-ES, and other
confidential compute environments make most of this information opaque, and
render KVM ioctls such as "KVM_GET_REGS" irrelevant. As a result, we need
the ability to pass this opaque metadata from one VMM to the next. The
easiest way to do this is to leave this data in the kernel, and transfer
ownership of the metadata from one KVM VM (or vCPU) to the next. In-kernel
hand off makes it possible to move any data that would be
unsafe/impossible for the kernel to hand directly to userspace, and
cannot be reproduced using data that can be handed to userspace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Thu, 11 Nov 2021 13:47:33 +0000 (14:47 +0100)]
KVM: x86: Drop arbitrary KVM_SOFT_MAX_VCPUS
KVM_CAP_NR_VCPUS is used to get the "recommended" maximum number of
VCPUs and arm64/mips/riscv report num_online_cpus(). Powerpc reports
either num_online_cpus() or num_present_cpus(), s390 has multiple
constants depending on hardware features. On x86, KVM reports an
arbitrary value of '710' which is supposed to be the maximum tested
value but it's possible to test all KVM_MAX_VCPUS even when there are
less physical CPUs available.
Drop the arbitrary '710' value and return num_online_cpus() on x86 as
well. The recommendation will match other architectures and will mean
'no CPU overcommit'.
For reference, QEMU only queries KVM_CAP_NR_VCPUS to print a warning
when the requested vCPU number exceeds it. The static limit of '710'
is quite weird as smaller systems with just a few physical CPUs should
certainly "recommend" less.
Vipin Sharma [Tue, 9 Nov 2021 17:44:26 +0000 (17:44 +0000)]
KVM: Move INVPCID type check from vmx and svm to the common kvm_handle_invpcid()
Handle #GP on INVPCID due to an invalid type in the common switch
statement instead of relying on the callers (VMX and SVM) to manually
validate the type.
Unlike INVVPID and INVEPT, INVPCID is not explicitly documented to check
the type before reading the operand from memory, so deferring the
type validity check until after that point is architecturally allowed.
Signed-off-by: Vipin Sharma <vipinsh@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109174426.2350547-3-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vipin Sharma [Tue, 9 Nov 2021 17:44:25 +0000 (17:44 +0000)]
KVM: VMX: Add a helper function to retrieve the GPR index for INVPCID, INVVPID, and INVEPT
handle_invept(), handle_invvpid(), handle_invpcid() read the same reg2
field in vmcs.VMX_INSTRUCTION_INFO to get the index of the GPR that
holds the invalidation type. Add a helper to retrieve reg2 from VMX
instruction info to consolidate and document the shift+mask magic.
Signed-off-by: Vipin Sharma <vipinsh@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109174426.2350547-2-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the x2APIC MSR bitmap intereption code for L2, which is the last
holdout of open coded bitmap manipulations. Freshen up the SDM/PRM
comment, rename the function to make it abundantly clear the funky
behavior is x2APIC specific, and explain _why_ vmcs01's bitmap is ignored
(the previous comment was flat out wrong for x2APIC behavior).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109013047.2041518-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: VMX: Macrofy the MSR bitmap getters and setters
Add builder macros to generate the MSR bitmap helpers to reduce the
amount of copy-paste code, especially with respect to all the magic
numbers needed to calc the correct bit location.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109013047.2041518-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Always check vmcs01's MSR bitmap when merging L0 and L1 bitmaps for L2,
and always update the relevant bits in vmcs02. This fixes two distinct,
but intertwined bugs related to dynamic MSR bitmap modifications.
The first issue is that KVM fails to enable MSR interception in vmcs02
for the FS/GS base MSRs if L1 first runs L2 with interception disabled,
and later enables interception.
The second issue is that KVM fails to honor userspace MSR filtering when
preparing vmcs02.
Fix both issues simultaneous as fixing only one of the issues (doesn't
matter which) would create a mess that no one should have to bisect.
Fixing only the first bug would exacerbate the MSR filtering issue as
userspace would see inconsistent behavior depending on the whims of L1.
Fixing only the second bug (MSR filtering) effectively requires fixing
the first, as the nVMX code only knows how to transition vmcs02's
bitmap from 1->0.
Move the various accessor/mutators that are currently buried in vmx.c
into vmx.h so that they can be shared by the nested code.
Fixes: 61513ecbd862 ("KVM: x86: Introduce MSR filtering") Fixes: b60bcabdc945 ("KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible") Cc: stable@vger.kernel.org Cc: Alexander Graf <graf@amazon.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109013047.2041518-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: Query current VMCS when determining if MSR bitmaps are in use
Check the current VMCS controls to determine if an MSR write will be
intercepted due to MSR bitmaps being disabled. In the nested VMX case,
KVM will disable MSR bitmaps in vmcs02 if they're disabled in vmcs12 or
if KVM can't map L1's bitmaps for whatever reason.
Note, the bad behavior is relatively benign in the current code base as
KVM sets all bits in vmcs02's MSR bitmap by default, clears bits if and
only if L0 KVM also disables interception of an MSR, and only uses the
buggy helper for MSR_IA32_SPEC_CTRL. Because KVM explicitly tests WRMSR
before disabling interception of MSR_IA32_SPEC_CTRL, the flawed check
will only result in KVM reading MSR_IA32_SPEC_CTRL from hardware when it
isn't strictly necessary.
Tag the fix for stable in case a future fix wants to use
msr_write_intercepted(), in which case a buggy implementation in older
kernels could prove subtly problematic.
Fixes: a0c50f30a9a6 ("KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109013047.2041518-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Don't update vcpu->arch.pv_eoi.msr_val when a bogus value was written to MSR_KVM_PV_EOI_EN
When kvm_gfn_to_hva_cache_init() call from kvm_lapic_set_pv_eoi() fails,
MSR write to MSR_KVM_PV_EOI_EN results in #GP so it is reasonable to
expect that the value we keep internally in KVM wasn't updated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211108152819.12485-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paul Durrant [Fri, 5 Nov 2021 09:51:01 +0000 (09:51 +0000)]
KVM: x86: Make sure KVM_CPUID_FEATURES really are KVM_CPUID_FEATURES
Currently when kvm_update_cpuid_runtime() runs, it assumes that the
KVM_CPUID_FEATURES leaf is located at 0x40000001. This is not true,
however, if Hyper-V support is enabled. In this case the KVM leaves will
be offset.
This patch introdues as new 'kvm_cpuid_base' field into struct
kvm_vcpu_arch to track the location of the KVM leaves and function
kvm_update_kvm_cpuid_base() (called from kvm_set_cpuid()) to locate the
leaves using the 'KVMKVMKVM\0\0\0' signature (which is now given a
definition in kvm_para.h). Adjustment of KVM_CPUID_FEATURES will hence now
target the correct leaf.
NOTE: A new for_each_possible_hypervisor_cpuid_base() macro is intoduced
into processor.h to avoid having duplicate code for the iteration
over possible hypervisor base leaves.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Message-Id: <20211105095101.5384-3-pdurrant@amazon.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Add helper to consolidate core logic of SET_CPUID{2} flows
Move the core logic of SET_CPUID and SET_CPUID2 to a common helper, the
only difference between the two ioctls() is the format of the userspace
struct. A future fix will add yet more code to the core logic.
No functional change intended.
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211105095101.5384-2-pdurrant@amazon.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Junaid Shahid [Thu, 4 Nov 2021 00:33:59 +0000 (17:33 -0700)]
kvm: mmu: Use fast PF path for access tracking of huge pages when possible
The fast page fault path bails out on write faults to huge pages in
order to accommodate dirty logging. This change adds a check to do that
only when dirty logging is actually enabled, so that access tracking for
huge pages can still use the fast path for write faults in the common
case.
Signed-off-by: Junaid Shahid <junaids@google.com> Reviewed-by: Ben Gardon <bgardon@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211104003359.2201967-1-junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap the read of iter->sptep in tdp_mmu_map_handle_target_level() with
rcu_dereference(). Shadow pages in the TDP MMU, and thus their SPTEs,
are protected by rcu.
This fixes a Sparse warning at tdp_mmu.c:900:51:
warning: incorrect type in argument 1 (different address spaces)
expected unsigned long long [usertype] *sptep
got unsigned long long [noderef] [usertype] __rcu *[usertype] sptep
Fixes: 499547a0eaa2 ("KVM: MMU: pass kvm_mmu_page struct to make_spte") Cc: Ben Gardon <bgardon@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211103161833.3769487-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Fri, 5 Nov 2021 20:20:58 +0000 (13:20 -0700)]
kvm: x86: Convert return type of *is_valid_rdpmc_ecx() to bool
These function names sound like predicates, and they have siblings,
*is_valid_msr(), which _are_ predicates. Moreover, there are comments
that essentially warn that these functions behave unexpectedly.
Flip the polarity of the return values, so that they become
predicates, and convert the boolean result to a success/failure code
at the outer call site.
Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211105202058.1048757-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Tue, 2 Nov 2021 17:36:39 +0000 (17:36 +0000)]
KVM: x86: Fix recording of guest steal time / preempted status
In commit 18f679be8be0 ("x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is
not missed") we switched to using a gfn_to_pfn_cache for accessing the
guest steal time structure in order to allow for an atomic xchg of the
preempted field. This has a couple of problems.
Firstly, kvm_map_gfn() doesn't work at all for IOMEM pages when the
atomic flag is set, which it is in kvm_steal_time_set_preempted(). So a
guest vCPU using an IOMEM page for its steal time would never have its
preempted field set.
Secondly, the gfn_to_pfn_cache is not invalidated in all cases where it
should have been. There are two stages to the GFN->PFN conversion;
first the GFN is converted to a userspace HVA, and then that HVA is
looked up in the process page tables to find the underlying host PFN.
Correct invalidation of the latter would require being hooked up to the
MMU notifiers, but that doesn't happen---so it just keeps mapping and
unmapping the *wrong* PFN after the userspace page tables change.
In the !IOMEM case at least the stale page *is* pinned all the time it's
cached, so it won't be freed and reused by anyone else while still
receiving the steal time updates. The map/unmap dance only takes care
of the KVM administrivia such as marking the page dirty.
Until the gfn_to_pfn cache handles the remapping automatically by
integrating with the MMU notifiers, we might as well not get a
kernel mapping of it, and use the perfectly serviceable userspace HVA
that we already have. We just need to implement the atomic xchg on
the userspace address with appropriate exception handling, which is
fairly trivial.
Cc: stable@vger.kernel.org Fixes: 18f679be8be0 ("x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <3645b9b889dac6438394194bb5586a46b68d581f.camel@infradead.org>
[I didn't entirely agree with David's assessment of the
usefulness of the gfn_to_pfn cache, and integrated the outcome
of the discussion in the above commit message. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Gonda [Thu, 21 Oct 2021 17:43:00 +0000 (10:43 -0700)]
KVM: SEV: Add support for SEV intra host migration
For SEV to work with intra host migration, contents of the SEV info struct
such as the ASID (used to index the encryption key in the AMD SP) and
the list of memory regions need to be transferred to the target VM.
This change adds a commands for a target VMM to get a source SEV VM's sev
info.
Signed-off-by: Peter Gonda <pgonda@google.com> Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Marc Orr <marcorr@google.com> Cc: Marc Orr <marcorr@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org
Message-Id: <20211021174303.385706-3-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 11 Nov 2021 15:02:26 +0000 (10:02 -0500)]
KVM: SEV: provide helpers to charge/uncharge misc_cg
Avoid code duplication across all callers of misc_cg_try_charge and
misc_cg_uncharge. The resource type for KVM is always derived from
sev->es_active, and the quantity is always 1.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 11 Nov 2021 15:13:38 +0000 (10:13 -0500)]
KVM: generalize "bugged" VM to "dead" VM
Generalize KVM_REQ_VM_BUGGED so that it can be called even in cases
where it is by design that the VM cannot be operated upon. In this
case any KVM_BUG_ON should still warn, so introduce a new flag
kvm->vm_dead that is separate from kvm->vm_bugged.
Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Takashi Sakamoto [Thu, 11 Nov 2021 10:30:15 +0000 (19:30 +0900)]
ALSA: fireworks: add support for Loud Onyx 1200f quirk
Loud Technologies shipped Onyx 1200f 2008 in its Mackie brand and
already discontinued. The model uses component of Fireworks board
module as its communication and DSP function.
The latest firmware (v4.6.0) has a quirk that tx packet includes wrong
value (0x1f) in its dbs field at middle and higher sampling transfer
frequency. It brings ALSA fireworks driver discontinuity of data block
counter.
This commit fixes it by assuming it as a quirk of firmware version
4.6.0.
$ cd linux-firewire-tools/src
$ python crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 0404b9ef bus_info_length 4, crc_length 4, crc 47599
404 31333934 bus_name "1394"
408 e064a212 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 100,
max_rec 10 (2048), max_rom 2, gen 1, spd 2 (S400)
40c 000ff209 company_id 000ff2 |
410 62550ce0 device_id 0962550ce0 | EUI-64 000ff20962550ce0
root directory
-----------------------------------------------------------------
414 0008088e directory_length 8, crc 2190
418 03000ff2 vendor
41c 8100000f --> descriptor leaf at 458
420 1701200f model
424 81000018 --> descriptor leaf at 484
428 0c008380 node capabilities
42c 8d000003 --> eui-64 leaf at 438
430 d1000005 --> unit directory at 444
434 08000ff2 (immediate value)
unit directory at 444
-----------------------------------------------------------------
444 00045d94 directory_length 4, crc 23956
448 1200a02d specifier id: 1394 TA
44c 13010000 version
450 1701200f model
454 8100000c --> descriptor leaf at 484
Paolo Bonzini [Thu, 11 Nov 2021 12:40:26 +0000 (07:40 -0500)]
Merge branch 'kvm-guest-sev-migration' into kvm-master
Add guest api and guest kernel support for SEV live migration.
Introduces a new hypercall to notify the host of changes to the page
encryption status. If the page is encrypted then it must be migrated
through the SEV firmware or a helper VM sharing the key. If page is
not encrypted then it can be migrated normally by userspace. This new
hypercall is invoked using paravirt_ops.
Conflicts: sev_active() replaced by cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT).
Ashish Kalra [Tue, 24 Aug 2021 11:07:45 +0000 (11:07 +0000)]
x86/kvm: Add kexec support for SEV Live Migration.
Reset the host's shared pages list related to kernel
specific page encryption status settings before we load a
new kernel by kexec. We cannot reset the complete
shared pages list here as we need to retain the
UEFI/OVMF firmware specific settings.
The host's shared pages list is maintained for the
guest to keep track of all unencrypted guest memory regions,
therefore we need to explicitly mark all shared pages as
encrypted again before rebooting into the new guest kernel.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Steve Rutherford <srutherford@google.com>
Message-Id: <3e051424ab839ea470f88333273d7a185006754f.1629726117.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ashish Kalra [Tue, 24 Aug 2021 11:06:40 +0000 (11:06 +0000)]
EFI: Introduce the new AMD Memory Encryption GUID.
Introduce a new AMD Memory Encryption GUID which is currently
used for defining a new UEFI environment variable which indicates
UEFI/OVMF support for the SEV live migration feature. This variable
is setup when UEFI/OVMF detects host/hypervisor support for SEV
live migration and later this variable is read by the kernel using
EFI runtime services to verify if OVMF supports the live migration
feature.
Brijesh Singh [Tue, 24 Aug 2021 11:05:00 +0000 (11:05 +0000)]
mm: x86: Invoke hypercall when page encryption status is changed
Invoke a hypercall when a memory region is changed from encrypted ->
decrypted and vice versa. Hypervisor needs to know the page encryption
status during the guest migration.
Brijesh Singh [Tue, 24 Aug 2021 11:04:35 +0000 (11:04 +0000)]
x86/kvm: Add AMD SEV specific Hypercall3
KVM hypercall framework relies on alternative framework to patch the
VMCALL -> VMMCALL on AMD platform. If a hypercall is made before
apply_alternative() is called then it defaults to VMCALL. The approach
works fine on non SEV guest. A VMCALL would causes #UD, and hypervisor
will be able to decode the instruction and do the right things. But
when SEV is active, guest memory is encrypted with guest key and
hypervisor will not be able to decode the instruction bytes.
To highlight the need to provide this interface, capturing the
flow of apply_alternatives() :
setup_arch() call init_hypervisor_platform() which detects
the hypervisor platform the kernel is running under and then the
hypervisor specific initialization code can make early hypercalls.
For example, KVM specific initialization in case of SEV will try
to mark the "__bss_decrypted" section's encryption state via early
page encryption status hypercalls.
Now, apply_alternatives() is called much later when setup_arch()
calls check_bugs(), so we do need some kind of an early,
pre-alternatives hypercall interface. Other cases of pre-alternatives
hypercalls include marking per-cpu GHCB pages as decrypted on SEV-ES
and per-cpu apf_reason, steal_time and kvm_apic_eoi as decrypted for
SEV generally.
Add SEV specific hypercall3, it unconditionally uses VMMCALL. The hypercall
will be used by the SEV guest to notify encrypted pages to the hypervisor.
This kvm_sev_hypercall3() function is abstracted and used as follows :
All these early hypercalls are made through early_set_memory_XX() interfaces,
which in turn invoke pv_ops (paravirt_ops).
This early_set_memory_XX() -> pv_ops.mmu.notify_page_enc_status_changed()
is a generic interface and can easily have SEV, TDX and any other
future platform specific abstractions added to it.
Currently, pv_ops.mmu.notify_page_enc_status_changed() callback is setup to
invoke kvm_sev_hypercall3() in case of SEV.
Similarly, in case of TDX, pv_ops.mmu.notify_page_enc_status_changed()
can be setup to a TDX specific callback.
Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Steve Rutherford <srutherford@google.com> Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <6fd25c749205dd0b1eb492c60d41b124760cc6ae.1629726117.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Willem de Bruijn [Thu, 11 Nov 2021 11:57:17 +0000 (06:57 -0500)]
selftests/net: udpgso_bench_rx: fix port argument
The below commit added optional support for passing a bind address.
It configures the sockaddr bind arguments before parsing options and
reconfigures on options -b and -4.
This broke support for passing port (-p) on its own.
Configure sockaddr after parsing all arguments.
Fixes: 12c2b7a0f657 ("selftests: add functionals test for UDP GRO") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
M Chetan Kumar [Wed, 10 Nov 2021 16:20:36 +0000 (21:50 +0530)]
net: wwan: iosm: fix compilation warning
curr_phase is unused. Removed the dead code.
Fixes: 5fa15c270cf9 ("net: wwan: iosm: transport layer support for fw flashing/cd") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Thu, 11 Nov 2021 10:25:16 +0000 (15:55 +0530)]
cxgb4: fix eeprom len when diagnostics not implemented
Ensure diagnostics monitoring support is implemented for the SFF 8472
compliant port module and set the correct length for ethtool port
module eeprom read.
Fixes: c343811bcf69 ("cxgb4: Add support for ethtool i2c dump") Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Damien Le Moal [Thu, 4 Nov 2021 08:31:58 +0000 (17:31 +0900)]
libata: fix read log timeout value
Some ATA drives are very slow to respond to READ_LOG_EXT and
READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the
device is revalidated right after resuming a system or inserting the
ATA adapter driver (e.g. ahci). The default 5s timeout
(ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing
errors during the device configuration. Ex:
...
ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133
ata9.00: qc timeout (cmd 0x2f)
ata9.00: Read log page 0x00 failed, Emask 0x4
ata9.00: Read log page 0x00 failed, Emask 0x40
ata9.00: NCQ Send/Recv Log not supported
ata9.00: Read log page 0x08 failed, Emask 0x40
ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata9.00: Read log page 0x00 failed, Emask 0x40
ata9.00: ATA Identify Device Log not supported
ata9.00: failed to set xfermode (err_mask=0x40)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: configured for UDMA/133
...
The timeout error causes a soft reset of the drive link, followed in
most cases by a successful revalidation as that give enough time to the
drive to become fully ready to quickly process the read log commands.
However, in some cases, this also fails resulting in the device being
dropped.
Fix this by using adding the ata_eh_revalidate_timeouts entries for the
READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout
increased to 15s, retriable one time.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
net: fix premature exit from NAPI state polling in napi_disable()
Commit fcf38d026808 ("net: make napi_disable() symmetric with
enable") accidentally introduced a bug sometimes leading to a kernel
BUG when bringing an iface up/down under heavy traffic load.
Prior to this commit, napi_disable() was polling n->state until
none of (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC) is set and then
always flip them. Now there's a possibility to get away with the
NAPIF_STATE_SCHE unset as 'continue' drops us to the cmpxchg()
call with an uninitialized variable, rather than straight to
another round of the state check.
Error path looks like:
napi_disable():
unsigned long val, new; /* new is uninitialized */
do {
val = READ_ONCE(n->state); /* NAPIF_STATE_NPSVC and/or
NAPIF_STATE_SCHED is set */
if (val & (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC)) { /* true */
usleep_range(20, 200);
continue; /* go straight to the condition check */
}
new = val | <...>
} while (cmpxchg(&n->state, val, new) != val); /* state == val, cmpxchg()
writes garbage */
napi_enable():
do {
val = READ_ONCE(n->state);
BUG_ON(!test_bit(NAPI_STATE_SCHED, &val)); /* 50/50 boom */
<...>
Linus Torvalds [Thu, 11 Nov 2021 01:05:37 +0000 (17:05 -0800)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Only bug fixes and cleanups for ext4 this merge window.
Of note are fixes for the combination of the inline_data and
fast_commit fixes, and more accurately calculating when to schedule
additional lazy inode table init, especially when CONFIG_HZ is 100HZ"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix error code saved on super block during file system abort
ext4: inline data inode fast commit replay fixes
ext4: commit inline data during fast commit
ext4: scope ret locally in ext4_try_to_trim_range()
ext4: remove an unused variable warning with CONFIG_QUOTA=n
ext4: fix boolreturn.cocci warnings in fs/ext4/name.c
ext4: prevent getting empty inode buffer
ext4: move ext4_fill_raw_inode() related functions
ext4: factor out ext4_fill_raw_inode()
ext4: prevent partial update of the extent blocks
ext4: check for inconsistent extents between index and leaf block
ext4: check for out-of-order index extents in ext4_valid_extent_entries()
ext4: convert from atomic_t to refcount_t on ext4_io_end->count
ext4: refresh the ext4_ext_path struct after dropping i_data_sem.
ext4: ensure enough credits in ext4_ext_shift_path_extents
ext4: correct the left/middle/right debug message for binsearch
ext4: fix lazy initialization next schedule time computation in more granular unit
Revert "ext4: enforce buffer head state assertion in ext4_da_map_blocks"
Linus Torvalds [Thu, 11 Nov 2021 00:50:57 +0000 (16:50 -0800)]
Merge tag 'for-5.16-deadlock-fix-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Fix for a deadlock when direct/buffered IO is done on a mmaped file
and a fault happens (details in the patch). There's a fstest
generic/647 that triggers the problem and makes testing hard"
* tag 'for-5.16-deadlock-fix-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix deadlock due to page faults during direct IO reads and writes
Linus Torvalds [Thu, 11 Nov 2021 00:45:54 +0000 (16:45 -0800)]
Merge tag 'nfsd-5.16' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"A slow cycle for nfsd: mainly cleanup, including Neil's patch dropping
support for a filehandle format deprecated 20 years ago, and further
xdr-related cleanup from Chuck"
* tag 'nfsd-5.16' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd4: remove obselete comment
nfsd: document server-to-server-copy parameters
NFSD:fix boolreturn.cocci warning
nfsd: update create verifier comment
SUNRPC: Change return value type of .pc_encode
SUNRPC: Replace the "__be32 *p" parameter to .pc_encode
NFSD: Save location of NFSv4 COMPOUND status
SUNRPC: Change return value type of .pc_decode
SUNRPC: Replace the "__be32 *p" parameter to .pc_decode
SUNRPC: De-duplicate .pc_release() call sites
SUNRPC: Simplify the SVC dispatch code path
SUNRPC: Capture value of xdr_buf::page_base
SUNRPC: Add trace event when alloc_pages_bulk() makes no progress
svcrdma: Split svcrmda_wc_{read,write} tracepoints
svcrdma: Split the svcrdma_wc_send() tracepoint
svcrdma: Split the svcrdma_wc_receive() tracepoint
NFSD: Have legacy NFSD WRITE decoders use xdr_stream_subsegment()
SUNRPC: xdr_stream_subsegment() must handle non-zero page_bases
NFSD: Initialize pointer ni with NULL and not plain integer 0
NFSD: simplify struct nfsfh
...
Linus Torvalds [Thu, 11 Nov 2021 00:32:46 +0000 (16:32 -0800)]
Merge tag 'nfs-for-5.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- NFSv4.1 can always retrieve and cache the ACCESS mode on OPEN
- Optimisations for READDIR and the 'ls -l' style workload
- Further replacements of dprintk() with tracepoints and other
tracing improvements
- Ensure we re-probe NFSv4 server capabilities when the user does a
"mount -o remount"
Bugfixes:
- Fix an Oops in pnfs_mark_request_commit()
- Fix up deadlocks in the commit code
- Fix regressions in NFSv2/v3 attribute revalidation due to the
change_attr_type optimisations
- Fix some dentry verifier races
- Fix some missing dentry verifier settings
- Fix a performance regression in nfs_set_open_stateid_locked()
- SUNRPC was sending multiple SYN calls when re-establishing a TCP
connection.
- Fix multiple NFSv4 issues due to missing sanity checking of server
return values
- Fix a potential Oops when FREE_STATEID races with an unmount
Cleanups:
- Clean up the labelled NFS code
- Remove unused header <linux/pnfs_osd_xdr.h>"
* tag 'nfs-for-5.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (84 commits)
NFSv4: Sanity check the parameters in nfs41_update_target_slotid()
NFS: Remove the nfs4_label argument from decode_getattr_*() functions
NFS: Remove the nfs4_label argument from nfs_setsecurity
NFS: Remove the nfs4_label argument from nfs_fhget()
NFS: Remove the nfs4_label argument from nfs_add_or_obtain()
NFS: Remove the nfs4_label argument from nfs_instantiate()
NFS: Remove the nfs4_label from the nfs_setattrres
NFS: Remove the nfs4_label from the nfs4_getattr_res
NFS: Remove the f_label from the nfs4_opendata and nfs_openres
NFS: Remove the nfs4_label from the nfs4_lookupp_res struct
NFS: Remove the label from the nfs4_lookup_res struct
NFS: Remove the nfs4_label from the nfs4_link_res struct
NFS: Remove the nfs4_label from the nfs4_create_res struct
NFS: Remove the nfs4_label from the nfs_entry struct
NFS: Create a new nfs_alloc_fattr_with_label() function
NFS: Always initialise fattr->label in nfs_fattr_alloc()
NFSv4.2: alloc_file_pseudo() takes an open flag, not an f_mode
NFS: Don't allocate nfs_fattr on the stack in __nfs42_ssc_open()
NFSv4: Remove unnecessary 'minor version' check
NFSv4: Fix potential Oops in decode_op_map()
...
Linus Torvalds [Thu, 11 Nov 2021 00:15:54 +0000 (16:15 -0800)]
Merge branch 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
Dave Airlie [Thu, 11 Nov 2021 00:14:44 +0000 (10:14 +1000)]
Merge tag 'amd-drm-fixes-5.16-2021-11-10' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-5.16-2021-11-10:
amdgpu:
- Don't allow partial copy from user for DC debugfs
- SRIOV fixes
- GFX9 CSB pin count fix
- Various IP version check fixes
- DP 2.0 fixes
- Limit DCN1 MPO fix to DCN1
would indicate that the new core scheduling domain encompasses all
tasks in the process group of <pid>. Specifying 0 would only create a
core scheduling domain for the thread identified by <pid> and 2 would
encompass the whole thread-group of <pid>.
Note, the values 0, 1, and 2 correspond to PIDTYPE_PID, PIDTYPE_TGID,
and PIDTYPE_PGID. A first version tried to expose those values
directly to which I objected because:
- PIDTYPE_* is an enum that is kernel internal which we should not
expose to userspace directly.
- PIDTYPE_* indicates what a given struct pid is used for it doesn't
express a scope.
But what the 4th argument of PR_SCHED_CORE prctl() expresses is the
scope of the operation, i.e. the scope of the core scheduling domain
at creation time. So Eugene's patch now simply introduces three new
defines PR_SCHED_CORE_SCOPE_THREAD, PR_SCHED_CORE_SCOPE_THREAD_GROUP,
and PR_SCHED_CORE_SCOPE_PROCESS_GROUP. They simply express what
happens.
This has been on the mailing list for quite a while with all relevant
scheduler folks Cced. I announced multiple times that I'd pick this up
if I don't see or her anyone else doing it. None of this touches
proper scheduler code but only concerns uapi so I think this is fine.
With core scheduling being quite common now for vm managers (e.g.
moving individual vcpu threads into their own core scheduling domain)
and container managers (e.g. moving the init process into its own core
scheduling domain and letting all created children inherit it) having
to rely on raw numbers passed as the 4th argument in prctl() is a bit
annoying and everyone is starting to come up with their own defines"
* tag 'kernel.sys.v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
uapi/linux/prctl: provide macro definitions for the PR_SCHED_CORE type argument
Linus Torvalds [Thu, 11 Nov 2021 00:02:08 +0000 (16:02 -0800)]
Merge tag 'pidfd.v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner:
"Various places in the kernel have picked up pidfds.
The two most recent additions have probably been the ability to use
pidfds in bpf maps and the usage of pidfds in mm-based syscalls such
as process_mrelease() and process_madvise().
The same pattern to turn a pidfd into a struct task exists in two
places. One of those places used PIDTYPE_TGID while the other one used
PIDTYPE_PID even though it is clearly documented in all pidfd-helpers
that pidfds __currently__ only refer to thread-group leaders (subject
to change in the future if need be).
This isn't a bug per se but has the potential to be one if we allow
pidfds to refer to individual threads. If that happens we want to
audit all codepaths that make use of them to ensure they can deal with
pidfds refering to individual threads.
This adds a simple helper to turn a pidfd into a struct task making it
easy to grep for such places. Plus, it gets rid of code-duplication"
* tag 'pidfd.v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mm: use pidfd_get_task()
pid: add pidfd_get_task() helper
projects / kernel.git / log