]> git.baikalelectronics.ru Git - kernel.git/log
kernel.git
3 years agopowerpc/book3s64/radix: make tlb_single_page_flush_ceiling a debugfs entry
Aneesh Kumar K.V [Thu, 12 Aug 2021 13:28:30 +0000 (18:58 +0530)]
powerpc/book3s64/radix: make tlb_single_page_flush_ceiling a debugfs entry

Similar to x86/s390 add a debugfs file to tune tlb_single_page_flush_ceiling.
Also add a debugfs entry for tlb_local_single_page_flush_ceiling.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132831.233794-1-aneesh.kumar@linux.ibm.com
3 years agocpufreq: powernv: Fix init_chip_info initialization in numa=off
Pratik R. Sampat [Wed, 28 Jul 2021 12:05:00 +0000 (17:35 +0530)]
cpufreq: powernv: Fix init_chip_info initialization in numa=off

In the numa=off kernel command-line configuration init_chip_info() loops
around the number of chips and attempts to copy the cpumask of that node
which is NULL for all iterations after the first chip.

Hence, store the cpu mask for each chip instead of derving cpumask from
node while populating the "chips" struct array and copy that to the
chips[i].mask

Fixes: 92a1fc1dae4d ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Rename goto label to out_free_chip_cpu_mask]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728120500.87549-2-psampat@linux.ibm.com
3 years agopowerpc: wii_defconfig: Enable OTP by default
Emmanuel Gil Peyrot [Sun, 1 Aug 2021 07:38:22 +0000 (09:38 +0200)]
powerpc: wii_defconfig: Enable OTP by default

This selects the nintendo-otp module when building for this platform.

Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210801073822.12452-6-linkmauve@linkmauve.fr
3 years agopowerpc: wii.dts: Expose the OTP on this platform
Emmanuel Gil Peyrot [Sun, 1 Aug 2021 07:38:21 +0000 (09:38 +0200)]
powerpc: wii.dts: Expose the OTP on this platform

This can be used by the newly-added nintendo-otp nvmem module.

Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210801073822.12452-5-linkmauve@linkmauve.fr
3 years agopowerpc: wii.dts: Reduce the size of the control area
Emmanuel Gil Peyrot [Sun, 1 Aug 2021 07:38:20 +0000 (09:38 +0200)]
powerpc: wii.dts: Reduce the size of the control area

This is wrong, but needed in order to avoid overlapping ranges with the
OTP area added in the next commit.  A refactor of this part of the
device tree is needed: according to Wiibrew[1], this area starts at
0x0d800000 and spans 0x400 bytes (that is, 0x100 32-bit registers),
encompassing PIC and GPIO registers, amongst the ones already exposed in
this device tree, which should become children of the control@d800000
node.

[1] https://wiibrew.org/wiki/Hardware/Hollywood_Registers

Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210801073822.12452-4-linkmauve@linkmauve.fr
3 years agopowerpc: Bulk conversion to generic_handle_domain_irq()
Marc Zyngier [Mon, 2 Aug 2021 16:26:28 +0000 (17:26 +0100)]
powerpc: Bulk conversion to generic_handle_domain_irq()

Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210802162630.2219813-13-maz@kernel.org
3 years agoKVM: PPC: Book3S HV: XIVE: Add support for automatic save-restore
Cédric Le Goater [Tue, 20 Jul 2021 13:42:09 +0000 (15:42 +0200)]
KVM: PPC: Book3S HV: XIVE: Add support for automatic save-restore

On P10, the feature doing an automatic "save & restore" of a VCPU
interrupt context is set by default in OPAL. When a VP context is
pulled out, the state of the interrupt registers are saved by the XIVE
interrupt controller under the internal NVP structure representing the
VP. This saves a costly store/load in guest entries and exits.

If OPAL advertises the "save & restore" feature in the device tree,
it should also have set the 'H' bit in the CAM line. Check that when
vCPUs are connected to their ICP in KVM before going any further.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210720134209.256133-3-clg@kaod.org
3 years agoKVM: PPC: Book3S HV: XIVE: Add a 'flags' field
Cédric Le Goater [Tue, 20 Jul 2021 13:42:08 +0000 (15:42 +0200)]
KVM: PPC: Book3S HV: XIVE: Add a 'flags' field

Use it to hold platform specific features. P9 DD2 introduced
single-escalation support. P10 will add others.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210720134209.256133-2-clg@kaod.org
3 years agopowerpc: use IRQF_NO_DEBUG for IPIs
Cédric Le Goater [Mon, 19 Jul 2021 13:06:14 +0000 (15:06 +0200)]
powerpc: use IRQF_NO_DEBUG for IPIs

There is no need to use the lockup detector ("noirqdebug") for IPIs.
The ipistorm benchmark measures a ~10% improvement on high systems
when this flag is set.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210719130614.195886-1-clg@kaod.org
3 years agopowerpc/xive: Use XIVE domain under xmon and debugfs
Cédric Le Goater [Thu, 1 Jul 2021 13:27:49 +0000 (15:27 +0200)]
powerpc/xive: Use XIVE domain under xmon and debugfs

The default domain of the PCI/MSIs is not the XIVE domain anymore. To
list the IRQ mappings under XMON and debugfs, query the IRQ data from
the low level XIVE domain.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-32-clg@kaod.org
3 years agoKVM: PPC: Book3S HV: XICS: Fix mapping of passthrough interrupts
Cédric Le Goater [Thu, 1 Jul 2021 13:27:48 +0000 (15:27 +0200)]
KVM: PPC: Book3S HV: XICS: Fix mapping of passthrough interrupts

PCI MSIs now live in an MSI domain but the underlying calls, which
will EOI the interrupt in real mode, need an HW IRQ number mapped in
the XICS IRQ domain. Grab it there.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-31-clg@kaod.org
3 years agopowerpc/powernv/pci: Rework pnv_opal_pci_msi_eoi()
Cédric Le Goater [Thu, 1 Jul 2021 13:27:47 +0000 (15:27 +0200)]
powerpc/powernv/pci: Rework pnv_opal_pci_msi_eoi()

pnv_opal_pci_msi_eoi() is called from KVM to EOI passthrough interrupts
when in real mode. Adding MSI domain broke the hack using the
'ioda.irq_chip' field to deduce the owning PHB. Fix that by using the
IRQ chip data in the MSI domain.

The 'ioda.irq_chip' field is now unused and could be removed from the
pnv_phb struct.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-30-clg@kaod.org
3 years agopowerpc/powernv/pci: Set the IRQ chip data for P8/CXL devices
Cédric Le Goater [Thu, 1 Jul 2021 13:27:46 +0000 (15:27 +0200)]
powerpc/powernv/pci: Set the IRQ chip data for P8/CXL devices

Before MSI domains, the default IRQ chip of PHB3 MSIs was patched by
pnv_set_msi_irq_chip() with the custom EOI handler pnv_ioda2_msi_eoi()
and the owning PHB was deduced from the 'ioda.irq_chip' field. This
path has been deprecated by the MSI domains but it is still in use by
the P8 CAPI 'cxl' driver.

Rewriting this driver to support MSI would be a waste of time.
Nevertheless, we can still remove the IRQ chip patch and set the IRQ
chip data instead. This is cleaner.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-29-clg@kaod.org
3 years agopowerpc/xics: Fix IRQ migration
Cédric Le Goater [Thu, 1 Jul 2021 13:27:45 +0000 (15:27 +0200)]
powerpc/xics: Fix IRQ migration

desc->irq_data points to the top level IRQ data descriptor which is
not necessarily in the XICS IRQ domain. MSIs are in another domain for
instance. Fix that by looking for a mapping on the low level XICS IRQ
domain.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-28-clg@kaod.org
3 years agopowerpc/powernv/pci: Adapt is_pnv_opal_msi() to detect passthrough interrupt
Cédric Le Goater [Thu, 1 Jul 2021 13:27:44 +0000 (15:27 +0200)]
powerpc/powernv/pci: Adapt is_pnv_opal_msi() to detect passthrough interrupt

The pnv_ioda2_msi_eoi() chip handler is not used anymore for MSIs.
Simply use the check on the PSI-MSI chip.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-27-clg@kaod.org
3 years agopowerpc/powernv/pci: Drop unused MSI code
Cédric Le Goater [Thu, 1 Jul 2021 13:27:43 +0000 (15:27 +0200)]
powerpc/powernv/pci: Drop unused MSI code

MSIs should be fully managed by the PCI and IRQ subsystems now.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-26-clg@kaod.org
3 years agopowerpc/pseries/pci: Drop unused MSI code
Cédric Le Goater [Thu, 1 Jul 2021 13:27:42 +0000 (15:27 +0200)]
powerpc/pseries/pci: Drop unused MSI code

MSIs should be fully managed by the PCI and IRQ subsystems now.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-25-clg@kaod.org
3 years agopowerpc/xics: Drop unmask of MSIs at startup
Cédric Le Goater [Thu, 1 Jul 2021 13:27:41 +0000 (15:27 +0200)]
powerpc/xics: Drop unmask of MSIs at startup

That was a workaround in the XICS domain because of the lack of MSI
domain. This is now handled.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-24-clg@kaod.org
3 years agopowerpc/pci: Drop XIVE restriction on MSI domains
Cédric Le Goater [Thu, 1 Jul 2021 13:27:40 +0000 (15:27 +0200)]
powerpc/pci: Drop XIVE restriction on MSI domains

The PowerNV and pSeries platforms now have support for both the XICS
and XIVE IRQ domains.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-23-clg@kaod.org
3 years agopowerpc/powernv/pci: Customize the MSI EOI handler to support PHB3
Cédric Le Goater [Thu, 1 Jul 2021 13:27:39 +0000 (15:27 +0200)]
powerpc/powernv/pci: Customize the MSI EOI handler to support PHB3

PHB3s need an extra OPAL call to EOI the interrupt. The call takes an
OPAL HW IRQ number but it is translated into a vector number in OPAL.
Here, we directly use the vector number of the in-the-middle "PNV-MSI"
domain instead of grabbing the OPAL HW IRQ number in the XICS parent
domain.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-22-clg@kaod.org
3 years agopowerpc/xics: Add support for IRQ domain hierarchy
Cédric Le Goater [Thu, 1 Jul 2021 13:27:38 +0000 (15:27 +0200)]
powerpc/xics: Add support for IRQ domain hierarchy

XICS doesn't have any state associated with the IRQ. The support is
straightforward and simpler than for XIVE.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-21-clg@kaod.org
3 years agopowerpc/xics: Add debug logging to the set_irq_affinity handlers
Cédric Le Goater [Thu, 1 Jul 2021 13:27:37 +0000 (15:27 +0200)]
powerpc/xics: Add debug logging to the set_irq_affinity handlers

It really helps to know how the HW is configured when tweaking the IRQ
subsystem.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-20-clg@kaod.org
3 years agopowerpc/xics: Give a name to the default XICS IRQ domain
Cédric Le Goater [Thu, 1 Jul 2021 13:27:36 +0000 (15:27 +0200)]
powerpc/xics: Give a name to the default XICS IRQ domain

and clean up the error path.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-19-clg@kaod.org
3 years agopowerpc/xics: Rename the map handler in a check handler
Cédric Le Goater [Thu, 1 Jul 2021 13:27:35 +0000 (15:27 +0200)]
powerpc/xics: Rename the map handler in a check handler

This moves the IRQ initialization done under the different ICS backends
in the common part of XICS. The 'map' handler becomes a simple 'check'
on the HW IRQ at the FW level.

As we don't need an ICS anymore in xics_migrate_irqs_away(), the XICS
domain does not set a chip data for the IRQ.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-18-clg@kaod.org
3 years agopowerpc/xics: Remove ICS list
Cédric Le Goater [Thu, 1 Jul 2021 13:27:34 +0000 (15:27 +0200)]
powerpc/xics: Remove ICS list

We always had only one ICS per machine. Simplify the XICS driver by
removing the ICS list.

The ICS stored in the chip data of the XICS domain becomes useless and
we don't need it anymore to migrate away IRQs from a CPU. This will be
removed in a subsequent patch.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-17-clg@kaod.org
3 years agoKVM: PPC: Book3S HV: XIVE: Fix mapping of passthrough interrupts
Cédric Le Goater [Thu, 1 Jul 2021 13:27:33 +0000 (15:27 +0200)]
KVM: PPC: Book3S HV: XIVE: Fix mapping of passthrough interrupts

PCI MSI interrupt numbers are now mapped in a PCI-MSI domain but the
underlying calls handling the passthrough of the interrupt in the
guest need a number in the XIVE IRQ domain.

Use the IRQ data mapped in the XIVE IRQ domain and not the one in the
PCI-MSI domain.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-16-clg@kaod.org
3 years agoKVM: PPC: Book3S HV: XIVE: Change interface of passthrough interrupt routines
Cédric Le Goater [Thu, 1 Jul 2021 13:27:32 +0000 (15:27 +0200)]
KVM: PPC: Book3S HV: XIVE: Change interface of passthrough interrupt routines

The routine kvmppc_set_passthru_irq() calls kvmppc_xive_set_mapped()
and kvmppc_xive_clr_mapped() with an IRQ descriptor. Use directly the
host IRQ number to remove a useless conversion.

Add some debug.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-15-clg@kaod.org
3 years agoKVM: PPC: Book3S HV: Use the new IRQ chip to detect passthrough interrupts
Cédric Le Goater [Thu, 1 Jul 2021 13:27:31 +0000 (15:27 +0200)]
KVM: PPC: Book3S HV: Use the new IRQ chip to detect passthrough interrupts

Passthrough PCI MSI interrupts are detected in KVM with a check on a
specific EOI handler (P8) or on XIVE (P9). We can now check the
PCI-MSI IRQ chip which is cleaner.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-14-clg@kaod.org
3 years agopowerpc/powernv/pci: Add MSI domains
Cédric Le Goater [Thu, 1 Jul 2021 13:27:30 +0000 (15:27 +0200)]
powerpc/powernv/pci: Add MSI domains

This is very similar to the MSI domains of the pSeries platform. The
MSI allocator is directly handled under the Linux PHB in the
in-the-middle "PNV-MSI" domain.

Only the XIVE (P9/P10) parent domain is supported for now. Support for
XICS will come later.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-13-clg@kaod.org
3 years agopowerpc/powernv/pci: Introduce __pnv_pci_ioda_msi_setup()
Cédric Le Goater [Thu, 1 Jul 2021 13:27:29 +0000 (15:27 +0200)]
powerpc/powernv/pci: Introduce __pnv_pci_ioda_msi_setup()

It will be used as a 'compose_msg' handler of the MSI domain introduced
later.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-12-clg@kaod.org
3 years agopowerpc/pseries/pci: Add support of MSI domains to PHB hotplug
Cédric Le Goater [Thu, 1 Jul 2021 13:27:28 +0000 (15:27 +0200)]
powerpc/pseries/pci: Add support of MSI domains to PHB hotplug

Simply allocate or release the MSI domains when a PHB is inserted in
or removed from the machine.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-11-clg@kaod.org
3 years agopowerpc/pseries/pci: Add a msi_free() handler to clear XIVE data
Cédric Le Goater [Thu, 1 Jul 2021 13:27:27 +0000 (15:27 +0200)]
powerpc/pseries/pci: Add a msi_free() handler to clear XIVE data

The MSI domain clears the IRQ with msi_domain_free(), which calls
irq_domain_free_irqs_top(), which clears the handler data. This is a
problem for the XIVE controller since we need to unmap MMIO pages and
free a specific XIVE structure.

The 'msi_free()' handler is called before irq_domain_free_irqs_top()
when the handler data is still available. Use that to clear the XIVE
controller data.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-10-clg@kaod.org
3 years agopowerpc/pseries/pci: Add a domain_free_irqs() handler
Cédric Le Goater [Thu, 1 Jul 2021 13:27:26 +0000 (15:27 +0200)]
powerpc/pseries/pci: Add a domain_free_irqs() handler

The RTAS firmware can not disable one MSI at a time. It's all or
nothing. We need a custom free IRQ handler for that.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-9-clg@kaod.org
3 years agopowerpc/xive: Remove irqd_is_started() check when setting the affinity
Cédric Le Goater [Thu, 1 Jul 2021 13:27:25 +0000 (15:27 +0200)]
powerpc/xive: Remove irqd_is_started() check when setting the affinity

In the early days of XIVE support, commit b8c61a0f1980 ("powerpc/xive:
Ensure active irqd when setting affinity") tried to fix an issue
related to interrupt migration. If the root cause was related to CPU
unplug, it should have been fixed and there is no reason to keep the
irqd_is_started() check. This test is also breaking affinity setting
of MSIs which can set before starting the associated IRQ.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-8-clg@kaod.org
3 years agopowerpc/xive: Drop unmask of MSIs at startup
Cédric Le Goater [Thu, 1 Jul 2021 13:27:24 +0000 (15:27 +0200)]
powerpc/xive: Drop unmask of MSIs at startup

That was a workaround in the XIVE domain because of the lack of MSI
domain. This is now handled.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-7-clg@kaod.org
3 years agopowerpc/pseries/pci: Add MSI domains
Cédric Le Goater [Thu, 1 Jul 2021 13:27:23 +0000 (15:27 +0200)]
powerpc/pseries/pci: Add MSI domains

Two IRQ domains are added on top of default machine IRQ domain.

First, the top level "pSeries-PCI-MSI" domain deals with the MSI
specificities. In this domain, the HW IRQ numbers are generated by the
PCI MSI layer, they compose a unique ID for an MSI source with the PCI
device identifier and the MSI vector number.

These numbers can be quite large on a pSeries machine running under
the IBM Hypervisor and /sys/kernel/irq/ and /proc/interrupts will
require small fixes to show them correctly.

Second domain is the in-the-middle "pSeries-MSI" domain which acts as
a proxy between the PCI MSI subsystem and the machine IRQ subsystem.
It usually allocate the MSI vector numbers but, on pSeries machines,
this is done by the RTAS FW and RTAS returns IRQ numbers in the IRQ
number space of the machine. This is why the in-the-middle "pSeries-MSI"
domain has the same HW IRQ numbers as its parent domain.

Only the XIVE (P9/P10) parent domain is supported for now. We still
need to add support for IRQ domain hierarchy under XICS.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-6-clg@kaod.org
3 years agopowerpc/xive: Ease debugging of xive_irq_set_affinity()
Cédric Le Goater [Thu, 1 Jul 2021 13:27:22 +0000 (15:27 +0200)]
powerpc/xive: Ease debugging of xive_irq_set_affinity()

pr_debug() is easier to activate and it helps to know how the kernel
configures the HW when tweaking the IRQ subsystem.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-5-clg@kaod.org
3 years agopowerpc/xive: Add support for IRQ domain hierarchy
Cédric Le Goater [Thu, 1 Jul 2021 13:27:21 +0000 (15:27 +0200)]
powerpc/xive: Add support for IRQ domain hierarchy

This adds handlers to allocate/free IRQs in a domain hierarchy. We
could try to use xive_irq_domain_map() in xive_irq_domain_alloc() but
we rely on xive_irq_alloc_data() to set the IRQ handler data and
duplicating the code is simpler.

xive_irq_free_data() needs to be called when IRQ are freed to clear
the MMIO mappings and free the XIVE handler data, xive_irq_data
structure. This is going to be a problem with MSI domains which we
will address later.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-4-clg@kaod.org
3 years agopowerpc/pseries/pci: Introduce rtas_prepare_msi_irqs()
Cédric Le Goater [Thu, 1 Jul 2021 13:27:20 +0000 (15:27 +0200)]
powerpc/pseries/pci: Introduce rtas_prepare_msi_irqs()

This splits the routine setting the MSIs in two parts: allocation of
MSIs for the PCI device at the FW level (RTAS) and the actual mapping
and activation of the IRQs.

rtas_prepare_msi_irqs() will serve as a handler for the PCI MSI domain.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-3-clg@kaod.org
3 years agopowerpc/pseries/pci: Introduce __find_pe_total_msi()
Cédric Le Goater [Thu, 1 Jul 2021 13:27:19 +0000 (15:27 +0200)]
powerpc/pseries/pci: Introduce __find_pe_total_msi()

It will help to size the PCI MSI domain.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-2-clg@kaod.org
3 years agoKVM: PPC: Use arch_get_random_seed_long instead of powernv variant
Alexey Kardashevskiy [Thu, 5 Aug 2021 07:56:49 +0000 (17:56 +1000)]
KVM: PPC: Use arch_get_random_seed_long instead of powernv variant

The powernv_get_random_long() does not work in nested KVM (which is
pseries) and produces a crash when accessing in_be64(rng->regs) in
powernv_get_random_long().

This replaces powernv_get_random_long with the ppc_md machine hook
wrapper.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210805075649.2086567-1-aik@ozlabs.ru
3 years agopowerpc/configs: Disable legacy ptys on microwatt defconfig
Anton Blanchard [Thu, 5 Aug 2021 01:20:05 +0000 (11:20 +1000)]
powerpc/configs: Disable legacy ptys on microwatt defconfig

We shouldn't need legacy ptys, and disabling the option improves boot
time by about 0.5 seconds.

Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210805112005.3cb1f412@kryten.localdomain
3 years agopowerpc: Always inline radix_enabled() to fix build failure
Jordan Niethe [Wed, 4 Aug 2021 01:37:24 +0000 (11:37 +1000)]
powerpc: Always inline radix_enabled() to fix build failure

This is the same as commit 1830fc1ac177 ("powerpc: Force inlining of
mmu_has_feature to fix build failure") but for radix_enabled().  The
config in the linked bugzilla causes the following build failure:

  LD      .tmp_vmlinux.kallsyms1
  powerpc64-linux-ld: arch/powerpc/mm/pgtable.o: in function `.__ptep_set_access_flags':
  pgtable.c:(.text+0x17c): undefined reference to `.radix__ptep_set_access_flags'
  powerpc64-linux-ld: arch/powerpc/mm/pageattr.o: in function `.change_page_attr':
  pageattr.c:(.text+0xc0): undefined reference to `.radix__flush_tlb_kernel_range'
  etc.

This is due to radix_enabled() not being inlined. See extract from
building with -Winline:

  In file included from arch/powerpc/include/asm/lppaca.h:46,
                   from arch/powerpc/include/asm/paca.h:17,
                   from arch/powerpc/include/asm/current.h:13,
                   from include/linux/thread_info.h:23,
                   from include/asm-generic/preempt.h:5,
                   from ./arch/powerpc/include/generated/asm/preempt.h:1,
                   from include/linux/preempt.h:78,
                   from include/linux/spinlock.h:51,
                   from include/linux/mmzone.h:8,
                   from include/linux/gfp.h:6,
                   from arch/powerpc/mm/pgtable.c:21:
  arch/powerpc/include/asm/book3s/64/pgtable.h: In function '__ptep_set_access_flags':
  arch/powerpc/include/asm/mmu.h:327:20: error: inlining failed in call to 'radix_enabled': call is unlikely and code size would grow [-Werror=inline]

The code relies on constant folding of MMU_FTRS_POSSIBLE at buildtime
and elimination of non possible parts of code at compile time. For this
to work radix_enabled() must be inlined so make it __always_inline.

Reported-by: Erhard F. <erhard_f@mailbox.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Trimmed error messages in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213803
Link: https://lore.kernel.org/r/20210804013724.514468-1-jniethe5@gmail.com
3 years agopowerpc: Replace deprecated CPU-hotplug functions.
Sebastian Andrzej Siewior [Tue, 3 Aug 2021 14:15:46 +0000 (16:15 +0200)]
powerpc: Replace deprecated CPU-hotplug functions.

The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().

Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210803141621.780504-4-bigeasy@linutronix.de
3 years agopowerpc/kexec: fix for_each_child.cocci warning
kernel test robot [Tue, 3 Aug 2021 14:59:55 +0000 (16:59 +0200)]
powerpc/kexec: fix for_each_child.cocci warning

for_each_node_by_type should have of_node_put() before return.

Generated by: scripts/coccinelle/iterators/for_each_child.cocci

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2108031654080.17639@hadrien
3 years agopowerpc/pseries: Prevent free CPU ids being reused on another node
Laurent Dufour [Thu, 29 Apr 2021 17:49:08 +0000 (19:49 +0200)]
powerpc/pseries: Prevent free CPU ids being reused on another node

When a CPU is hot added, the CPU ids are taken from the available mask
from the lower possible set. If that set of values was previously used
for a CPU attached to a different node, it appears to an application as
if these CPUs have migrated from one node to another node which is not
expected.

To prevent this, it is needed to record the CPU ids used for each node
and to not reuse them on another node. However, to prevent CPU hot plug
to fail, in the case the CPU ids is starved on a node, the capability to
reuse other nodes’ free CPU ids is kept. A warning is displayed in such
a case to warn the user.

A new CPU bit mask (node_recorded_ids_map) is introduced for each
possible node. It is populated with the CPU onlined at boot time, and
then when a CPU is hot plugged to a node. The bits in that mask remain
when the CPU is hot unplugged, to remind this CPU ids have been used for
this node.

If no id set was found, a retry is made without removing the ids used on
the other nodes to try reusing them. This is the way ids have been
allocated prior to this patch.

The effect of this patch can be seen by removing and adding CPUs using
the Qemu monitor. In the following case, the first CPU from the node 2
is removed, then the first one from the node 1 is removed too. Later,
the first CPU of the node 2 is added back. Without that patch, the
kernel will number these CPUs using the first CPU ids available which
are the ones freed when removing the second CPU of the node 0. This
leads to the CPU ids 16-23 to move from the node 1 to the node 2. With
the patch applied, the CPU ids 32-39 are used since they are the lowest
free ones which have not been used on another node.

At boot time:
  [root@vm40 ~]# numactl -H | grep cpus
  node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
  node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
  node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Vanilla kernel, after the CPU hot unplug/plug operations:
  [root@vm40 ~]# numactl -H | grep cpus
  node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
  node 1 cpus: 24 25 26 27 28 29 30 31
  node 2 cpus: 16 17 18 19 20 21 22 23 40 41 42 43 44 45 46 47

Patched kernel, after the CPU hot unplug/plug operations:
  [root@vm40 ~]# numactl -H | grep cpus
  node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
  node 1 cpus: 24 25 26 27 28 29 30 31
  node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210429174908.16613-1-ldufour@linux.ibm.com
3 years agopseries/drmem: update LMBs after LPM
Laurent Dufour [Mon, 17 May 2021 09:06:06 +0000 (11:06 +0200)]
pseries/drmem: update LMBs after LPM

After a LPM, the device tree node ibm,dynamic-reconfiguration-memory may be
updated by the hypervisor in the case the NUMA topology of the LPAR's
memory is updated.

This is handled by the kernel, but the memory's node is not updated because
there is no way to move a memory block between nodes from the Linux kernel
point of view.

If later a memory block is added or removed, drmem_update_dt() is called
and it is overwriting the DT node ibm,dynamic-reconfiguration-memory to
match the added or removed LMB. But the LMB's associativity node has not
been updated after the DT node update and thus the node is overwritten by
the Linux's topology instead of the hypervisor one.

Introduce a hook called when the ibm,dynamic-reconfiguration-memory node is
updated to force an update of the LMB's associativity. However, ignore the
call to that hook when the update has been triggered by drmem_update_dt().
Because, in that case, the LMB tree has been used to set the DT property
and thus it doesn't need to be updated back. Since drmem_update_dt() is
called under the protection of the device_hotplug_lock and the hook is
called in the same context, use a simple boolean variable to detect that
call.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210517090606.56930-1-ldufour@linux.ibm.com
3 years agopowerpc/numa: Consider the max NUMA node for migratable LPAR
Laurent Dufour [Tue, 11 May 2021 07:31:36 +0000 (09:31 +0200)]
powerpc/numa: Consider the max NUMA node for migratable LPAR

When a LPAR is migratable, we should consider the maximum possible NUMA
node instead of the number of NUMA nodes from the actual system.

The DT property 'ibm,current-associativity-domains' defines the maximum
number of nodes the LPAR can see when running on that box. But if the
LPAR is being migrated on another box, it may see up to the nodes
defined by 'ibm,max-associativity-domains'. So if a LPAR is migratable,
that value should be used.

Unfortunately, there is no easy way to know if an LPAR is migratable or
not. The hypervisor exports the property 'ibm,migratable-partition' in
the case it set to migrate partition, but that would not mean that the
current partition is migratable.

Without this patch, when a LPAR is started on a 2 node box and then
migrated to a 3 node box, the hypervisor may spread the LPAR's CPUs on
the 3rd node. In that case if a CPU from that 3rd node is added to the
LPAR, it will be wrongly assigned to the node because the kernel has
been set to use up to 2 nodes (the configuration of the departure node).
With this patch applies, the CPU is correctly added to the 3rd node.

Fixes: ba2c5eea4d6b ("powerpc/numa: Detect support for coregroup")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210511073136.17795-1-ldufour@linux.ibm.com
3 years agopowerpc/non-smp: Unconditionaly call smp_mb() on switch_mm
Christophe Leroy [Mon, 5 Jul 2021 12:00:50 +0000 (12:00 +0000)]
powerpc/non-smp: Unconditionaly call smp_mb() on switch_mm

Commit 321f5da583d4 ("powerpc, membarrier: Skip memory barrier in
switch_mm()") added some logic to skip the smp_mb() in
switch_mm_irqs_off() before the call to switch_mmu_context().

However, on non SMP smp_mb() is just a compiler barrier and doing
it unconditionaly is simpler than the logic used to check whether the
barrier is needed or not.

After the patch:

00000000 <switch_mm_irqs_off>:
...
   c: 7c 04 18 40  cmplw   r4,r3
  10: 81 24 00 24  lwz     r9,36(r4)
  14: 91 25 04 c8  stw     r9,1224(r5)
  18: 4d 82 00 20  beqlr
  1c: 48 00 00 00  b       1c <switch_mm_irqs_off+0x1c>
1c: R_PPC_REL24 switch_mmu_context

Before the patch:

00000000 <switch_mm_irqs_off>:
...
   c: 7c 04 18 40  cmplw   r4,r3
  10: 81 24 00 24  lwz     r9,36(r4)
  14: 91 25 04 c8  stw     r9,1224(r5)
  18: 4d 82 00 20  beqlr
  1c: 81 24 00 28  lwz     r9,40(r4)
  20: 71 29 00 0a  andi.   r9,r9,10
  24: 40 82 00 34  bne     58 <switch_mm_irqs_off+0x58>
  28: 48 00 00 00  b       28 <switch_mm_irqs_off+0x28>
28: R_PPC_REL24 switch_mmu_context
...
  58: 2c 03 00 00  cmpwi   r3,0
  5c: 41 82 ff cc  beq     28 <switch_mm_irqs_off+0x28>
  60: 48 00 00 00  b       60 <switch_mm_irqs_off+0x60>
60: R_PPC_REL24 switch_mmu_context

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e9d501da0c59f60ca767b1b3ea4603fce6d02b9e.1625486440.git.christophe.leroy@csgroup.eu
3 years agopowerpc: Remove in_kernel_text()
Christophe Leroy [Sun, 27 Jun 2021 17:09:18 +0000 (17:09 +0000)]
powerpc: Remove in_kernel_text()

Last user of in_kernel_text() stopped using in with
commit 1cf89b38aeaa ("powerpc: Make the 64-bit kernel as a
position-independent executable").

Generic function is_kernel_text() does the same.

So remote it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2a3a5b6f8cc0ef4e854d7b764f66aa8d2ee270d2.1624813698.git.christophe.leroy@csgroup.eu
3 years agopowerpc/64s/perf: Always use SIAR for kernel interrupts
Nicholas Piggin [Tue, 20 Jul 2021 14:15:04 +0000 (00:15 +1000)]
powerpc/64s/perf: Always use SIAR for kernel interrupts

If an interrupt is taken in kernel mode, always use SIAR for it rather than
looking at regs_sipr. This prevents samples piling up around interrupt
enable (hard enable or interrupt replay via soft enable) in PMUs / modes
where the PR sample indication is not in synch with SIAR.

This results in better sampling of interrupt entry and exit in particular.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210720141504.420110-1-npiggin@gmail.com
3 years agopowerpc/smp: Use existing L2 cache_map cpumask to find L3 cache siblings
Parth Shah [Wed, 28 Jul 2021 17:56:07 +0000 (23:26 +0530)]
powerpc/smp: Use existing L2 cache_map cpumask to find L3 cache siblings

On POWER10 systems, the "ibm,thread-groups" property "2" indicates the cpus
in thread-group share both L2 and L3 caches. Hence, use cache_property = 2
itself to find both the L2 and L3 cache siblings.
Hence, create a new thread_group_l3_cache_map to keep list of L3 siblings,
but fill the mask using same property "2" array.

Signed-off-by: Parth Shah <parth@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728175607.591679-4-parth@linux.ibm.com
3 years agopowerpc/cacheinfo: Remove the redundant get_shared_cpu_map()
Gautham R. Shenoy [Wed, 28 Jul 2021 17:56:06 +0000 (23:26 +0530)]
powerpc/cacheinfo: Remove the redundant get_shared_cpu_map()

The helper function get_shared_cpu_map() was added in

'commit 288e2142824b ("powerpc/cacheinfo: Report the correct
shared_cpu_map on big-cores")'

and subsequently expanded upon in

'commit 127abbf0a52d ("powerpc/cacheinfo: Print correct cache-sibling
map/list for L2 cache")'

in order to help report the correct groups of threads sharing these caches
on big-core systems where groups of threads within a core can share
different sets of caches.

Now that powerpc/cacheinfo is aware of "ibm,thread-groups" property,
cache->shared_cpu_map contains the correct set of thread-siblings
sharing the cache. Hence we no longer need the functions
get_shared_cpu_map(). This patch removes this function. We also remove
the helper function index_dir_to_cpu() which was only called by
get_shared_cpu_map().

With these functions removed, we can still see the correct
cache-sibling map/list for L1 and L2 caches on systems with L1 and L2
caches distributed among groups of threads in a core.

With this patch, on a SMT8 POWER10 system where the L1 and L2 caches
are split between the two groups of threads in a core, for CPUs 8,9,
the L1-Data, L1-Instruction, L2, L3 cache CPU sibling list is as
follows:

$ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8,10,12,14
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8,10,12,14
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8,10,12,14
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-15
/sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9,11,13,15
/sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9,11,13,15
/sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9,11,13,15
/sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-15

$ ppc64_cpu --smt=4
$ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8,10
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8,10
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8,10
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-11
/sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9,11
/sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9,11
/sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9,11
/sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-11

$ ppc64_cpu --smt=2
$ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-9
/sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9
/sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9
/sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9
/sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-9

$ ppc64_cpu --smt=1
$ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728175607.591679-3-parth@linux.ibm.com
3 years agopowerpc/cacheinfo: Lookup cache by dt node and thread-group id
Gautham R. Shenoy [Wed, 28 Jul 2021 17:56:05 +0000 (23:26 +0530)]
powerpc/cacheinfo: Lookup cache by dt node and thread-group id

Currently the cacheinfo code on powerpc indexes the "cache" objects
(modelling the L1/L2/L3 caches) where the key is device-tree node
corresponding to that cache. On some of the POWER server platforms
thread-groups within the core share different sets of caches (Eg: On
SMT8 POWER9 systems, threads 0,2,4,6 of a core share L1 cache and
threads 1,3,5,7 of the same core share another L1 cache). On such
platforms, there is a single device-tree node corresponding to that
cache and the cache-configuration within the threads of the core is
indicated via "ibm,thread-groups" device-tree property.

Since the current code is not aware of the "ibm,thread-groups"
property, on the aforementoined systems, cacheinfo code still treats
all the threads in the core to be sharing the cache because of the
single device-tree node (In the earlier example, the cacheinfo code
would says CPUs 0-7 share L1 cache).

In this patch, we make the powerpc cacheinfo code aware of the
"ibm,thread-groups" property. We indexe the "cache" objects by the
key-pair (device-tree node, thread-group id). For any CPUX, for a
given level of cache, the thread-group id is defined to be the first
CPU in the "ibm,thread-groups" cache-group containing CPUX. For levels
of cache which are not represented in "ibm,thread-groups" property,
the thread-group id is -1.

[parth: Remove "static" keyword for the definition of "thread_group_l1_cache_map"
and "thread_group_l2_cache_map" to get rid of the compile error.]

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Parth Shah <parth@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728175607.591679-2-parth@linux.ibm.com
3 years agopowerpc: move the install rule to arch/powerpc/Makefile
Masahiro Yamada [Thu, 29 Jul 2021 14:19:37 +0000 (23:19 +0900)]
powerpc: move the install rule to arch/powerpc/Makefile

Currently, the install target in arch/powerpc/Makefile descends into
arch/powerpc/boot/Makefile to invoke the shell script, but there is no
good reason to do so.

arch/powerpc/Makefile can run the shell script directly.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729141937.445051-3-masahiroy@kernel.org
3 years agopowerpc: make the install target not depend on any build artifact
Masahiro Yamada [Thu, 29 Jul 2021 14:19:36 +0000 (23:19 +0900)]
powerpc: make the install target not depend on any build artifact

The install target should not depend on any build artifact.

The reason is explained in commit fedda2eeb06b ("arm, kbuild: make
"make install" not depend on vmlinux").

Change the PowerPC installation code in a similar way.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729141937.445051-2-masahiroy@kernel.org
3 years agopowerpc: remove unused zInstall target from arch/powerpc/boot/Makefile
Masahiro Yamada [Thu, 29 Jul 2021 14:19:35 +0000 (23:19 +0900)]
powerpc: remove unused zInstall target from arch/powerpc/boot/Makefile

Commit 2541f318dc5b ("powerpc/boot: Don't install zImage.* from make
install") added the zInstall target to arch/powerpc/boot/Makefile,
but you cannot use it since the corresponding hook is missing in
arch/powerpc/Makefile.

It has never worked since its addition. Nobody has complained about
it for 7 years, which means this code was unneeded.

With this removal, the install.sh will be passed in with 4 parameters.
Simplify the shell script.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729141937.445051-1-masahiroy@kernel.org
3 years agocpuidle: pseries: Mark pseries_idle_proble() as __init
Nathan Chancellor [Tue, 3 Aug 2021 21:15:47 +0000 (14:15 -0700)]
cpuidle: pseries: Mark pseries_idle_proble() as __init

After commit 7cbd631d4dec ("cpuidle: pseries: Fixup CEDE0 latency only
for POWER10 onwards"), pseries_idle_probe() is no longer inlined when
compiling with clang, which causes a modpost warning:

WARNING: modpost: vmlinux.o(.text+0xc86a54): Section mismatch in
reference from the function pseries_idle_probe() to the function
.init.text:fixup_cede0_latency()
The function pseries_idle_probe() references
the function __init fixup_cede0_latency().
This is often because pseries_idle_probe lacks a __init
annotation or the annotation of fixup_cede0_latency is wrong.

pseries_idle_probe() is a non-init function, which calls
fixup_cede0_latency(), which is an init function, explaining the
mismatch. pseries_idle_probe() is only called from
pseries_processor_idle_init(), which is an init function, so mark
pseries_idle_probe() as __init so there is no more warning.

Fixes: 959bd1db7443 ("cpuidle: pseries: Add function to parse extended CEDE records")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210803211547.1093820-1-nathan@kernel.org
3 years agopowerpc/stacktrace: Include linux/delay.h
Michal Suchanek [Thu, 29 Jul 2021 18:01:03 +0000 (20:01 +0200)]
powerpc/stacktrace: Include linux/delay.h

commit 07e7fdc30d5f ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()")
introduces udelay() call without including the linux/delay.h header.
This may happen to work on master but the header that declares the
functionshould be included nonetheless.

Fixes: 07e7fdc30d5f ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729180103.15578-1-msuchanek@suse.de
3 years agocpuidle: pseries: Do not cap the CEDE0 latency in fixup_cede0_latency()
Gautham R. Shenoy [Mon, 19 Jul 2021 06:33:19 +0000 (12:03 +0530)]
cpuidle: pseries: Do not cap the CEDE0 latency in fixup_cede0_latency()

Currently in fixup_cede0_latency() code, we perform the fixup the
CEDE(0) exit latency value only if minimum advertized extended CEDE
latency values are less than 10us. This was done so as to not break
the expected behaviour on POWER8 platforms where the advertised
latency was higher than the default 10us, which would delay the SMT
folding on the core.

However, after the earlier patch "cpuidle/pseries: Fixup CEDE0 latency
only for POWER10 onwards", we can be sure that the fixup of CEDE0
latency is going to happen only from POWER10 onwards. Hence
unconditionally use the minimum exit latency provided by the platform.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1626676399-15975-3-git-send-email-ego@linux.vnet.ibm.com
3 years agocpuidle: pseries: Fixup CEDE0 latency only for POWER10 onwards
Gautham R. Shenoy [Mon, 19 Jul 2021 06:33:18 +0000 (12:03 +0530)]
cpuidle: pseries: Fixup CEDE0 latency only for POWER10 onwards

Commit 59777e5341bb ("cpuidle: pseries: Fixup exit latency for
CEDE(0)") sets the exit latency of CEDE(0) based on the latency values
of the Extended CEDE states advertised by the platform

On POWER9 LPARs, the firmwares advertise a very low value of 2us for
CEDE1 exit latency on a Dedicated LPAR. The latency advertized by the
PHYP hypervisor corresponds to the latency required to wakeup from the
underlying hardware idle state. However the wakeup latency from the
LPAR perspective should include

1. The time taken to transition the CPU from the Hypervisor into the
   LPAR post wakeup from platform idle state

2. Time taken to send the IPI from the source CPU (waker) to the idle
   target CPU (wakee).

1. can be measured via timer idle test, where we queue a timer, say
for 1ms, and enter the CEDE state. When the timer fires, in the timer
handler we compute how much extra timer over the expected 1ms have we
consumed. On a a POWER9 LPAR the numbers are

CEDE latency measured using a timer (numbers in ns)
N       Min      Median   Avg       90%ile  99%ile    Max    Stddev
400     2601     5677     5668.74    5917    6413     9299   455.01

1. and 2. combined can be determined by an IPI latency test where we
send an IPI to an idle CPU and in the handler compute the time
difference between when the IPI was sent and when the handler ran. We
see the following numbers on POWER9 LPAR.

CEDE latency measured using an IPI (numbers in ns)
N       Min      Median   Avg       90%ile  99%ile    Max    Stddev
400     711      7564     7369.43   8559    9514      9698   1200.01

Suppose, we consider the 99th percentile latency value measured using
the IPI to be the wakeup latency, the value would be 9.5us This is in
the ballpark of the default value of 10us.

Hence, use the exit latency of CEDE(0) based on the latency values
advertized by platform only from POWER10 onwards. The values
advertized on POWER10 platforms is more realistic and informed by the
latency measurements. For earlier platforms stick to the default value
of 10us. The fix was suggested by Michael Ellerman.

Fixes: 59777e5341bb ("cpuidle: pseries: Fixup exit latency for CEDE(0)")
Reported-by: Enrico Joedecke <joedecke@de.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1626676399-15975-2-git-send-email-ego@linux.vnet.ibm.com
3 years agopowerpc/kexec: blacklist functions called in real mode for kprobe
Hari Bathini [Wed, 14 Jul 2021 12:47:58 +0000 (18:17 +0530)]
powerpc/kexec: blacklist functions called in real mode for kprobe

As kprobe does not handle events happening in real mode, blacklist the
functions that only get called in real mode or in kexec sequence with
MMU turned off.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/162626687834.155313.4692863392927831843.stgit@hbathini-workstation.ibm.com
3 years agoMerge branch 'fixes' into next
Michael Ellerman [Mon, 26 Jul 2021 10:37:53 +0000 (20:37 +1000)]
Merge branch 'fixes' into next

Merge our fixes branch, which contains some fixes that didn't make it
into rc2 but which we'd like in next.

3 years agoKVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state
Nicholas Piggin [Thu, 8 Jul 2021 11:26:22 +0000 (21:26 +1000)]
KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state

The H_ENTER_NESTED hypercall is handled by the L0, and it is a request
by the L1 to switch the context of the vCPU over to that of its L2
guest, and return with an interrupt indication. The L1 is responsible
for switching some registers to guest context, and the L0 switches
others (including all the hypervisor privileged state).

If the L2 MSR has TM active, then the L1 is responsible for
recheckpointing the L2 TM state. Then the L1 exits to L0 via the
H_ENTER_NESTED hcall, and the L0 saves the TM state as part of the exit,
and then it recheckpoints the TM state as part of the nested entry and
finally HRFIDs into the L2 with TM active MSR. Not efficient, but about
the simplest approach for something that's horrendously complicated.

Problems arise if the L1 exits to the L0 with a TM state which does not
match the L2 TM state being requested. For example if the L1 is
transactional but the L2 MSR is non-transactional, or vice versa. The
L0's HRFID can take a TM Bad Thing interrupt and crash.

Fix this by disallowing H_ENTER_NESTED in TM[T] state entirely, and then
ensuring that if the L1 is suspended then the L2 must have TM active,
and if the L1 is not suspended then the L2 must not have TM active.

Fixes: ab4fb3f93012 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
3 years agoKVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
Nicholas Piggin [Tue, 20 Jul 2021 10:43:09 +0000 (20:43 +1000)]
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow

The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on
the rtas_args.nargs that was provided by the guest. That guest nargs
value is not range checked, so the guest can cause the host rets pointer
to be pointed outside the args array. The individual rtas function
handlers check the nargs and nrets values to ensure they are correct,
but if they are not, the handlers store a -3 (0xfffffffd) failure
indication in rets[0] which corrupts host memory.

Fix this by testing up front whether the guest supplied nargs and nret
would exceed the array size, and fail the hcall directly without storing
a failure indication to rets[0].

Also expand on a comment about why we kill the guest and try not to
return errors directly if we have a valid rets[0] pointer.

Fixes: d88dc3c0455d ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls")
Cc: stable@vger.kernel.org # v3.10+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
3 years agoLinux 5.14-rc2
Linus Torvalds [Sun, 18 Jul 2021 21:13:49 +0000 (14:13 -0700)]
Linux 5.14-rc2

3 years agoMerge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm...
Linus Torvalds [Sun, 18 Jul 2021 19:20:27 +0000 (12:20 -0700)]
Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs
   are offlined.

 - Fix 'perf test' problems related to the recently added hybrid
   (BIG/little) code.

 - Split ARM's coresight (hw tracing) decode by aux records to avoid
   fatal decoding errors.

 - Fix add event failure in 'perf probe' when running 32-bit perf in a
   64-bit kernel.

 - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.

 - Fix memory and refcount leaks detected by ASAn when running 'perf
   test', should be clean of warnings now.

 - Remove broken definition of __LITTLE_ENDIAN from tools'
   linux/kconfig.h, which was breaking the build in some systems.

 - Cast PTHREAD_STACK_MIN to int as it may turn into 'long
   sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some
   systems.

 - Fix libperf build error with LIBPFM4=1.

 - Sync UAPI files changed by the memfd_secret new syscall.

* tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits)
  perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
  perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
  perf data: Close all files in close_dir()
  perf probe-file: Delete namelist in del_events() on the error path
  perf test bpf: Free obj_buf
  perf trace: Free strings in trace__parse_events_option()
  perf trace: Free syscall tp fields in evsel->priv
  perf trace: Free syscall->arg_fmt
  perf trace: Free malloc'd trace fields on exit
  perf lzma: Close lzma stream on exit
  perf script: Fix memory 'threads' and 'cpus' leaks on exit
  perf script: Release zstd data
  perf session: Cleanup trace_event
  perf inject: Close inject.output on exit
  perf report: Free generated help strings for sort option
  perf env: Fix memory leak of cpu_pmu_caps
  perf test maps__merge_in: Fix memory leak of maps
  perf dso: Fix memory leak in dso__new_map()
  perf test event_update: Fix memory leak of unit
  perf test event_update: Fix memory leak of evlist
  ...

3 years agoMerge tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Linus Torvalds [Sun, 18 Jul 2021 18:27:25 +0000 (11:27 -0700)]
Merge tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "A few fixes for issues in the new online shrink code, additional
  corrections for my recent bug-hunt w.r.t. extent size hints on
  realtime, and improved input checking of the GROWFSRT ioctl.

  IOW, the usual 'I somehow got bored during the merge window and
  resumed auditing the farther reaches of xfs':

   - Fix shrink eligibility checking when sparse inode clusters enabled

   - Reset '..' directory entries when unlinking directories to prevent
     verifier errors if fs is shrinked later

   - Don't report unusable extent size hints to FSGETXATTR

   - Don't warn when extent size hints are unusable because the sysadmin
     configured them that way

   - Fix insufficient parameter validation in GROWFSRT ioctl

   - Fix integer overflow when adding rt volumes to filesystem"

* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: detect misaligned rtinherit directory extent size hints
  xfs: fix an integer overflow error in xfs_growfs_rt
  xfs: improve FSGROWFSRT precondition checking
  xfs: don't expose misaligned extszinherit hints to userspace
  xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
  xfs: reset child dir '..' entry when unlinking child
  xfs: check for sparse inode clusters that cross new EOAG when shrinking

3 years agoMerge tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Linus Torvalds [Sun, 18 Jul 2021 18:17:06 +0000 (11:17 -0700)]
Merge tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull iomap fixes from Darrick Wong:
 "A handful of bugfixes for the iomap code.

  There's nothing especially exciting here, just fixes for UBSAN (not
  KASAN as I erroneously wrote in the tag message) warnings about
  undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some
  reshuffling of per-page block state info to fix some problems with
  gfs2.

   - Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE

   - Fix assertion errors when using inlinedata files on gfs2"

* tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor
  iomap: Don't create iomap_page objects for inline files
  iomap: Permit pages without an iop to enter writeback
  iomap: remove the length variable in iomap_seek_hole
  iomap: remove the length variable in iomap_seek_data

3 years agoMerge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masah...
Linus Torvalds [Sun, 18 Jul 2021 18:10:30 +0000 (11:10 -0700)]
Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Restore the original behavior of scripts/setlocalversion when
   LOCALVERSION is set to empty.

 - Show Kconfig prompts even for 'make -s'

 - Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
   for older GNU Make versions

* tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Documentation: Fix intiramfs script name
  Kbuild: lto: fix module versionings mismatch in GNU make 3.X
  kbuild: do not suppress Kconfig prompts for silent build
  scripts/setlocalversion: fix a bug when LOCALVERSION is empty

3 years agoDocumentation: Fix intiramfs script name
Robert Richter [Thu, 15 Jul 2021 09:26:02 +0000 (11:26 +0200)]
Documentation: Fix intiramfs script name

Documentation was not changed when renaming the script in commit
63dd77bf5e60 ("initramfs: rename gen_initramfs_list.sh to
gen_initramfs.sh"). Fixing this.

Basically does:

 $ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh)

Fixes: 63dd77bf5e60 ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh")
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
3 years agoKbuild: lto: fix module versionings mismatch in GNU make 3.X
Lecopzer Chen [Thu, 15 Jul 2021 07:37:16 +0000 (15:37 +0800)]
Kbuild: lto: fix module versionings mismatch in GNU make 3.X

When building modules(CONFIG_...=m), I found some of module versions
are incorrect and set to 0.
This can be found in build log for first clean build which shows

WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed,
symbol will not be versioned.

But in second build(incremental build), the WARNING disappeared and the
module version becomes valid CRC and make someone who want to change
modules without updating kernel image can't insert their modules.

The problematic code is
+ $(foreach n, $(filter-out FORCE,$^), \
+ $(if $(wildcard $(n).symversions), \
+ ; cat $(n).symversions >> $@.symversions))

For example:
  rm -f fs/notify/built-in.a.symversions    ; rm -f fs/notify/built-in.a; \
llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \
fs/notify/notification.o fs/notify/group.o ...

`foreach n` shows nothing to `cat` into $(n).symversions because
`if $(wildcard $(n).symversions)` return nothing, but actually
they do exist during this line was executed.

-rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o
-rw-r--r-- 1 root root    111 Jun 13 19:10 fs/notify/fsnotify.o.symversions

The reason is the $(n).symversions are generated at runtime, but
Makefile wildcard function expends and checks the file exist or not
during parsing the Makefile.

Thus fix this by use `test` shell command to check the file
existence in runtime.

Rebase from both:
1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/]
2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/]

Fixes: 61b9dfa7ce3e ("kbuild: lto: fix module versioning")
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
3 years agokbuild: do not suppress Kconfig prompts for silent build
Masahiro Yamada [Wed, 14 Jul 2021 04:23:49 +0000 (13:23 +0900)]
kbuild: do not suppress Kconfig prompts for silent build

When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.

  $ make
  [ snip ]
  Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)

This is the only interactive place in the build process.

Commit a4714225623a ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.

Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.

Fixes: a4714225623a ("kbuild: sink stdout from cmd for silent build")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
3 years agoscripts/setlocalversion: fix a bug when LOCALVERSION is empty
Mikulas Patocka [Mon, 12 Jul 2021 19:35:46 +0000 (15:35 -0400)]
scripts/setlocalversion: fix a bug when LOCALVERSION is empty

The commit 7822fe915091 ("scripts/setlocalversion: simplify the short
version part") reduces indentation. Unfortunately, it also changes behavior
in a subtle way - if the user has empty "LOCALVERSION" variable, the plus
sign is appended to the kernel version. It wasn't appended before.

This patch reverts to the old behavior - we append the plus sign only if
the LOCALVERSION variable is not set.

Fixes: 7822fe915091 ("scripts/setlocalversion: simplify the short version part")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
3 years agoperf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
Yang Jihong [Tue, 13 Jul 2021 11:23:58 +0000 (19:23 +0800)]
perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set

The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.

Before:

  #perf sched record sleep 1
  event syntax error: 'sched:sched_stat_wait'
                       \___ unknown tracepoint

  Error:  File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
  Hint:   Perhaps this kernel misses some CONFIG_ setting to enable this feature?.

  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events

Solution:
  Check whether schedstat tracepoints are exposed. If no, these events are not recorded.

After:
  # perf sched record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
  # perf sched report
  run measurement overhead: 4736 nsecs
  sleep measurement overhead: 9059979 nsecs
  the run test took 999854 nsecs
  the sleep test took 8945271 nsecs
  nr_run_events:        716
  nr_sleep_events:      785
  nr_wakeup_events:     0
  ...
  ------------------------------------------------------------

Fixes: 206bbb6df45ba ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
Yang Jihong [Thu, 15 Jul 2021 06:37:23 +0000 (14:37 +0800)]
perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel

The "address" member of "struct probe_trace_point" uses long data type.
If kernel is 64-bit and perf program is 32-bit, size of "address"
variable is 32 bits.

As a result, upper 32 bits of address read from kernel are truncated, an
error occurs during address comparison in kprobe_warn_out_range().

Before:

  # perf probe -a schedule
  schedule is out of .text, skip it.
    Error: Failed to add events.

Solution:
  Change data type of "address" variable to u64 and change corresponding
address printing and value assignment.

After:

  # perf.new.new probe -a schedule
  Added new event:
    probe:schedule       (on schedule)

  You can now use it in all perf tools, such as:

          perf record -e probe:schedule -aR sleep 1

  # perf probe -l
    probe:schedule       (on schedule@kernel/sched/core.c)
  # perf record -e probe:schedule -aR sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ]
  # perf report --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'probe:schedule'
  # Event count (approx.): 1366
  #
  # Overhead  Command          Shared Object      Symbol
  # ........  ...............  .................  ............
  #
       6.22%  migration/0      [kernel.kallsyms]  [k] schedule
       6.22%  migration/1      [kernel.kallsyms]  [k] schedule
       6.22%  migration/2      [kernel.kallsyms]  [k] schedule
       6.22%  migration/3      [kernel.kallsyms]  [k] schedule
       6.15%  migration/10     [kernel.kallsyms]  [k] schedule
       6.15%  migration/11     [kernel.kallsyms]  [k] schedule
       6.15%  migration/12     [kernel.kallsyms]  [k] schedule
       6.15%  migration/13     [kernel.kallsyms]  [k] schedule
       6.15%  migration/14     [kernel.kallsyms]  [k] schedule
       6.15%  migration/15     [kernel.kallsyms]  [k] schedule
       6.15%  migration/4      [kernel.kallsyms]  [k] schedule
       6.15%  migration/5      [kernel.kallsyms]  [k] schedule
       6.15%  migration/6      [kernel.kallsyms]  [k] schedule
       6.15%  migration/7      [kernel.kallsyms]  [k] schedule
       6.15%  migration/8      [kernel.kallsyms]  [k] schedule
       6.15%  migration/9      [kernel.kallsyms]  [k] schedule
       0.22%  rcu_sched        [kernel.kallsyms]  [k] schedule
  ...
  #
  # (Cannot load tips.txt file, please install perf!)
  #

Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jianlin Lv <jianlin.lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf data: Close all files in close_dir()
Riccardo Mancini [Fri, 16 Jul 2021 14:11:20 +0000 (16:11 +0200)]
perf data: Close all files in close_dir()

When using 'perf report' in directory mode, the first file is not closed
on exit, causing a memory leak.

The problem is caused by the iterating variable never reaching 0.

Fixes: 181888b868d6c695 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoperf probe-file: Delete namelist in del_events() on the error path
Riccardo Mancini [Thu, 15 Jul 2021 16:07:25 +0000 (18:07 +0200)]
perf probe-file: Delete namelist in del_events() on the error path

ASan reports some memory leaks when running:

  # perf test "42: BPF filter"

This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.

This patch adds a goto label before the deallocation and makes the error
path jump to it.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: f86a6f123313c86c ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
3 years agoMerge tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Linus Torvalds [Sat, 17 Jul 2021 22:58:24 +0000 (15:58 -0700)]
Merge tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are the patches for this week that came as the fallout of the
  merge window:

   - Two fixes for the NVidia memory controller driver

   - multiple defconfig files get patched to turn CONFIG_FB back on
     after that is no longer selected by CONFIG_DRM

   - ffa and scmpi firmware drivers fixes, mostly addressing compiler
     and documentation warnings

   - Platform specific fixes for device tree files on ASpeed, Renesas
     and NVidia SoC, mostly for recent regressions.

   - A workaround for a regression on the USB PHY with devlink when the
     usb-nop-xceiv driver is not available until the rootfs is mounted.

   - Device tree compiler warnings in Arm Versatile-AB"

* tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
  ARM: dts: versatile: Fix up interrupt controller node names
  ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
  ARM: configs: Update u8500_defconfig
  ARM: configs: Update Vexpress defconfig
  ARM: configs: Update Versatile defconfig
  ARM: configs: Update RealView defconfig
  ARM: configs: Update Integrator defconfig
  arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/
  firmware: arm_scmi: Fix range check for the maximum number of pending messages
  firmware: arm_scmi: Avoid padding in sensor message structure
  firmware: arm_scmi: Fix kernel doc warnings about return values
  firmware: arm_scpi: Fix kernel doc warnings
  firmware: arm_scmi: Fix kernel doc warnings
  ARM: shmobile: defconfig: Restore graphical consoles
  firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
  firmware: arm_ffa: Fix the comment style
  firmware: arm_ffa: Simplify probe function
  firmware: arm_ffa: Ensure drivers provide a probe function
  firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
  firmware: arm_scmi: Ensure drivers provide a probe function
  ...

3 years agoRevert "mm/slub: use stackdepot to save stack trace in objects"
Linus Torvalds [Sat, 17 Jul 2021 20:27:00 +0000 (13:27 -0700)]
Revert "mm/slub: use stackdepot to save stack trace in objects"

This reverts commit 5816a7c247164a6327631f1d0d42d62246ad96cb.

It's not clear why, but it causes unexplained problems in entirely
unrelated xfs code.  The most likely explanation is some slab
corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON.  See [1].

It ends up having a few other problems too, like build errors on
arch/arc, and Geert reporting it using much more memory on m68k [3] (it
probably does so elsewhere too, but it is probably just more noticeable
on m68k).

The architecture issues (both build and memory use) are likely just
because this change effectively force-enabled STACKDEPOT (along with a
very bad default value for the stackdepot hash size).  But together with
the xfs issue, this all smells like "this commit was not ready" to me.

Link: https://lore.kernel.org/linux-xfs/YPE3l82acwgI2OiV@infradead.org/
Link: https://lore.kernel.org/lkml/202107150600.LkGNb4Vb-lkp@intel.com/
Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sat, 17 Jul 2021 20:09:23 +0000 (13:09 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "One core fix for an oops which can occur if the error handling thread
  fails to start for some reason and the driver is removed.

  The other fixes are all minor ones in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req()
  scsi: mpi3mr: Fix W=1 compilation warnings
  scsi: pm8001: Clean up kernel-doc and comments
  scsi: zfcp: Report port fc_security as unknown early during remote cable pull
  scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
  scsi: fas216: Fix a build error
  scsi: core: Fix the documentation of the scsi_execute() time parameter

3 years agoMerge tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Sat, 17 Jul 2021 19:56:50 +0000 (12:56 -0700)]
Merge tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Eight cifs/smb3 fixes, including three for stable.

  Three are DFS related fixes, and two to fix problems pointed out by
  static checkers"

* tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: do not share tcp sessions of dfs connections
  SMB3.1.1: fix mount failure to some servers when compression enabled
  cifs: added WARN_ON for all the count decrements
  cifs: fix missing null session check in mount
  cifs: handle reconnect of tcon when there is no cached dfs referral
  cifs: fix the out of range assignment to bit fields in parse_server_interfaces
  cifs: Do not use the original cruid when following DFS links for multiuser mounts
  cifs: use the expiry output of dns_query to schedule next resolution

3 years agoMerge tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm...
Linus Torvalds [Sat, 17 Jul 2021 19:48:06 +0000 (12:48 -0700)]
Merge tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah Khan:
 "Fixes to kunit tool and documentation:

   - fix asserts on older python versions

   - fixes to misleading error messages when TAP header format is
     incorrect or when file is missing

   - documentation fix: drop obsolete information about uml_abort
     coverage

   - remove unnecessary annotations"

* tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: Assert the version requirement
  kunit: tool: remove unnecessary "annotations" import
  Documentation: kunit: drop obsolete note about uml_abort for coverage
  kunit: tool: Fix error messages for cases of no tests and wrong TAP header

3 years agoMerge tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Sat, 17 Jul 2021 19:44:32 +0000 (12:44 -0700)]
Merge tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "A fix to memory-hotplug hot-remove test to stop spamming logs with
  dump_page() entries and slowing the system down to a crawl"

* tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test

3 years agoMerge tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Sat, 17 Jul 2021 19:36:51 +0000 (12:36 -0700)]
Merge tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Fix the histogram logic from possibly crashing the kernel

  Working on the histogram code, I found that if you dereference a char
  pointer in a trace event that happens to point to user space, it can
  crash the kernel, as it does no checks of that pointer. I have code
  coming that will do this better, so just remove this ability to treat
  character pointers in trace events as stings in the histogram"

* tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Do not reference char * as a string in histograms

3 years agoKVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
Nicholas Piggin [Fri, 16 Jul 2021 02:43:10 +0000 (12:43 +1000)]
KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak

vcpu_put is not called if the user copy fails. This can result in preempt
notifier corruption and crashes, among other issues.

Fixes: 1621d693642a ("KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210716024310.164448-2-npiggin@gmail.com
3 years agoKVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash
Nicholas Piggin [Fri, 16 Jul 2021 02:43:09 +0000 (12:43 +1000)]
KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash

When running CPU_FTR_P9_TM_HV_ASSIST, HFSCR[TM] is set for the guest
even if the host has CONFIG_TRANSACTIONAL_MEM=n, which causes it to be
unprepared to handle guest exits while transactional.

Normal guests don't have a problem because the HTM capability will not
be advertised, but a rogue or buggy one could crash the host.

Fixes: fc35d41584d7 ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210716024310.164448-1-npiggin@gmail.com
3 years agoMerge tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 17 Jul 2021 02:08:09 +0000 (19:08 -0700)]
Merge tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Drop 'resets' as required on renesas,du

 - Moving of fixed string patterns for 'properties' instead of
   'patternProperties'

 - Drop more redundant minItems/maxItems that we merged in the merge
   window

 - Indentation warning fix for sja1105

* tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: display: renesas,du: Make resets optional on R-Car H1
  dt-bindings: Move fixed string 'patternProperties' to 'properties'
  dt-bindings: More dropping redundant minItems/maxItems
  dt-bindings: net: dsa: sja1105: Fix indentation warnings

3 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Sat, 17 Jul 2021 02:00:53 +0000 (19:00 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "The bulk of the diffstat consists of changes to our uaccess routines
  so that they fall back to bytewise copying prior to reporting complete
  failure when the initial (multi-byte) access faults.

  However, the most disappointing change here is that we've had to bump
  ARCH_DMA_MINALIGN back to 128 bytes thanks to Qualcomm's "Kryo" CPU,
  which ended up in the MSM8996 mobile SoC. Still, at least we're now
  aware of this design and one of the hardware designers confirmed the
  L2 cacheline size for us.

  Summary:

   - Fix instrumentation annotations for entry code

   - Ensure kernel MTE state is restored correctly on resume from suspend

   - Fix MTE fault from new strlen() routine

   - Fallback to byte-wise accesses on initial uaccess fault

   - Bump Clang requirement for BTI

   - Revert ARCH_DMA_MINALIGN back to 128 bytes (shakes fist at Qualcomm)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: entry: fix KCOV suppression
  arm64: entry: add missing noinstr
  arm64: mte: fix restoration of GCR_EL1 from suspend
  arm64: Avoid premature usercopy failure
  arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newer
  Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)"
  arm64: Add missing header <asm/smp.h> in two files
  arm64: fix strlen() with CONFIG_KASAN_HW_TAGS

3 years agoARM: dts: versatile: Fix up interrupt controller node names
Sudeep Holla [Thu, 1 Jul 2021 13:21:18 +0000 (14:21 +0100)]
ARM: dts: versatile: Fix up interrupt controller node names

Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:

        arch/arm/boot/dts/versatile-ab.dt.yaml:
        intc@10140000: $nodename:0: 'intc@10140000' does not match
        '^interrupt-controller(@[0-9a-f,]+)*$'

arch/arm/boot/dts/versatile-ab.dt.yaml:
intc@10140000: 'clear-mask' does not match any of the regexes

Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@.. Also drop invalid
clear-mask property.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agoMerge tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel...
Arnd Bergmann [Fri, 16 Jul 2021 21:04:13 +0000 (23:04 +0200)]
Merge tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes

ASPEED device tree fixes for 5.14

 - eMMC phase corrections so Tacoma and Everest can boot

 - VUART irq polarity fix for e3c246d4i, using new bindings

 - I2C address fix for Rainier power supply

 - GPIO line name fixes

* tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: everest: PSU #3 address change
  ARM: dts: everest: Add phase corrections for eMMC
  ARM: dts: tacoma: Add phase corrections for eMMC
  ARM: dts: aspeed: Update e3c246d4i vuart properties
  ARM: dts: aspeed: Fix AST2600 machines line names

Link: https://lore.kernel.org/r/CACPK8XefdPzeOUDnDgk9cHQEs-9wF_ZSPdYQRzuNOpGZTyGUKQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agoARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
Stefan Wahren [Sat, 10 Jul 2021 11:04:55 +0000 (13:04 +0200)]
ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in

The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
been a "regression source" a lot of times. The last case is breakage of
USB mass storage boot has been commit 396ae27e3004 ("driver core: Set
fw_devlink=on by default") for multi_v7_defconfig. As long as
NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
endlessly and prevent booting from USB mass storage device. So make
the driver built-in as in bcm2835_defconfig and arm64/defconfig.

Fixes: 396ae27e3004 ("driver core: Set fw_devlink=on by default")
Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agoARM: configs: Update u8500_defconfig
Linus Walleij [Mon, 12 Jul 2021 08:55:22 +0000 (10:55 +0200)]
ARM: configs: Update u8500_defconfig

The platform lost the framebuffer due to a commit solving a
circular dependency in v5.14-rc1, so add it back in by explicitly
selecting the framebuffer.

The U8500 has also gained a few systems using touchscreens from
Cypress, Melfas and Zinitix so add these at the same time as
we're updating the defconfig anyway.

Fixes: eaa30519d3b4 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: phone-devel@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: newbyte@disroot.org
Link: https://lore.kernel.org/r/20210712085522.672482-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agoARM: configs: Update Vexpress defconfig
Linus Walleij [Tue, 13 Jul 2021 13:37:08 +0000 (15:37 +0200)]
ARM: configs: Update Vexpress defconfig

This updates the Versatile Express defconfig for the changes
in the v5.14-rc1 kernel:

- The Framebuffer CONFIG_FB needs to be explicitly selected
  or we don't get any framebuffer anymore. DRM has stopped to
  select FB because of circular dependency.
- CONFIG_CMA options were moved around.
- CONFIG_MODULES options were moved around.
- CONFIG_CRYPTO_HW was moved around.

Fixes: eaa30519d3b4 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210713133708.94397-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agoARM: configs: Update Versatile defconfig
Linus Walleij [Wed, 14 Jul 2021 08:18:19 +0000 (10:18 +0200)]
ARM: configs: Update Versatile defconfig

This updates the Versatile defconfig for the changes
in the v5.14-rc1 kernel:

- The Framebuffer CONFIG_FB needs to be explicitly selected
  or we don't get any framebuffer anymore. DRM has stopped to
  select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
  framebuffer emulation as DRM does.
- The Acorn fonts are removed, the default framebuffer font
  works fine. I don't know why this was selected in the first
  place or how the Kconfig was altered so it was removed.

Fixes: eaa30519d3b4 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714081819.139210-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agoARM: configs: Update RealView defconfig
Linus Walleij [Wed, 14 Jul 2021 09:00:40 +0000 (11:00 +0200)]
ARM: configs: Update RealView defconfig

This updates the RealView defconfig for the changes
in the v5.14-rc1 kernel:

- The Framebuffer CONFIG_FB needs to be explicitly selected
  or we don't get any framebuffer anymore. DRM has stopped to
  select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
  framebuffer emulation as DRM does.
- Drop two unused penguin logos.

Fixes: eaa30519d3b4 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714090040.182381-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agoARM: configs: Update Integrator defconfig
Linus Walleij [Wed, 14 Jul 2021 12:27:03 +0000 (14:27 +0200)]
ARM: configs: Update Integrator defconfig

This updates the Integrator defconfig for the changes
in the v5.14-rc1 kernel:

- The Framebuffer CONFIG_FB needs to be explicitly selected
  or we don't get any framebuffer anymore. DRM has stopped to
  select FB because of circular dependency.
- Drop the unused Matrox FB drivers that are only used with
  specific PCI cards.

Fixes: eaa30519d3b4 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714122703.212609-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agoMerge tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep...
Arnd Bergmann [Fri, 16 Jul 2021 21:01:24 +0000 (23:01 +0200)]
Merge tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

ARM SCMI fixes for v5.14

A small set of fixes:
- adding check for presence of probe while registering the driver to
  prevent NULL pointer access
- dropping the duplicate check as the driver core already takes care of it
- fix for possible scmi_linux_errmap buffer overflow
- fix to avoid sensor message structure padding
- fix the range check for the maximum number of pending SCMI messages
- fix for various kernel-doc warnings

* tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Fix range check for the maximum number of pending messages
  firmware: arm_scmi: Avoid padding in sensor message structure
  firmware: arm_scmi: Fix kernel doc warnings about return values
  firmware: arm_scpi: Fix kernel doc warnings
  firmware: arm_scmi: Fix kernel doc warnings
  firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
  firmware: arm_scmi: Ensure drivers provide a probe function
  firmware: arm_scmi: Simplify device probe function on the bus

Link: https://lore.kernel.org/r/20210714165831.2617437-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agoMerge tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudee...
Arnd Bergmann [Fri, 16 Jul 2021 21:00:44 +0000 (23:00 +0200)]
Merge tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

Arm FF-A fixes for v5.14

A small set of fixes:
- adding check for presence of probe while registering the driver to
  prevent NULL pointer access
- dropping the duplicate check as the driver core already takes care of it
- fixing possible ffa_linux_errmap buffer overflow and
- fixing kernel-doc warning for comment style

* tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
  firmware: arm_ffa: Fix the comment style
  firmware: arm_ffa: Simplify probe function
  firmware: arm_ffa: Ensure drivers provide a probe function

Link: https://lore.kernel.org/r/20210714165806.2617325-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agoarm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/
Geert Uytterhoeven [Wed, 14 Jul 2021 09:33:43 +0000 (11:33 +0200)]
arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/

Kconfig symbol PCI_IXP4XX_LEGACY does not exist, but IXP4XX_PCI_LEGACY
does.

Fixes: 9fd3a145d48e6ea0 ("ARM/ixp4xx: Make NEED_MACH_IO_H optional")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/82ce37c617293521f095a945a255456b9512769c.1626255077.git.geert+renesas@glider.be'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>