James Smart [Tue, 12 Apr 2022 22:20:08 +0000 (15:20 -0700)]
scsi: lpfc: Copyright updates for 14.2.0.2 patches
Update copyrights to 2022 for files modified in the 14.2.0.2 patch set.
Link: https://lore.kernel.org/r/20220412222008.126521-27-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:20:07 +0000 (15:20 -0700)]
scsi: lpfc: Update lpfc version to 14.2.0.2
Update lpfc version to 14.2.0.2.
Link: https://lore.kernel.org/r/20220412222008.126521-26-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:20:06 +0000 (15:20 -0700)]
scsi: lpfc: Expand setting ELS_ID field in ELS_REQUEST64_WQE
ELS_ID field for ELS_REQUEST64_WQE is not filled out when FIP is not
supported by the HBA.
Move setting ELS_ID logic into __lpfc_sli_prep_els_req_rsp_s4(), and remove
ELS_ID FIP dependency logic from lpfc_sli_prep_wqe().
Introduce PLOGI ELS_ID and as a result update wqe_els_id_MASK because PLOGI
ELS_ID = 0x4 occupies up to 3 bits.
While in __lpfc_sli_prep_els_req_rsp_s4() routine, remove SLI3-isms.
Link: https://lore.kernel.org/r/20220412222008.126521-25-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:20:05 +0000 (15:20 -0700)]
scsi: lpfc: Update stat accounting for READ_STATUS mbox command
READ_STATUS tx/rx byte count fields are now expanded to 64 bit wide
counters. This patch updates logic for the READ_STATUS mbox command when
displaying tx_word and rx_word statistics in sysfs.
Link: https://lore.kernel.org/r/20220412222008.126521-24-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:20:04 +0000 (15:20 -0700)]
scsi: lpfc: Change FA-PWWN detection methodology
Do not rely on vendor version field of the CSPs to determine if we are in a
FA-PWWN environment. Instead, use the following procedure:
First, during HBA initialization, driver does a READ_CONFIG to determine if
FA-PWWN is configured on the HBA. A LPFC_FAWWPN_CONFIG hba_flag is set
accordingly.
Next, when the link comes up before the driver gets a link up event, the
firmware logs into the fabric with FA-PWWN. If the fabric port does not
support FA-PWWN, the driver will get a Misconfigured FA-WWN async event
before the link up. A LPFC_FAWWPN_FABRIC hba_flag will be set accordingly.
Finally, if the fabric supports FA-PWWN, the firmware will replace its CSPs
WWN with the Fabric Assigned ones. Then after link up, the driver will
retrieve the Fabric Assigned WWN when it does a READ_SPARAM mbox command.
Link: https://lore.kernel.org/r/20220412222008.126521-23-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:20:03 +0000 (15:20 -0700)]
scsi: lpfc: Refactor cleanup of mailbox commands
The intention of this patch is to refactor mailbox memory allocation and
cleanup steps in one routine respectively to prevent memory leaks or memory
errors related to mailbox commands. There are trivial localized fixes as
well.
Provide lpfc_mbox_rsrc_prep() - this routine allocates the dmabuf and the
mbuf associated with it. It also catches allocation errors and returns
status.
Provide lpfc_mbox_rsrc_cleanup() - this routine verifies a dmabuf exists
and if so releases the associated mbuf and the dmabuf memory. It then sets
the ctx_buf to NULL and releases the mailbox memory to the mailbox pool.
Link: https://lore.kernel.org/r/20220412222008.126521-22-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:20:02 +0000 (15:20 -0700)]
scsi: lpfc: Fix field overload in lpfc_iocbq data structure
The lpfc_iocbq data structure has void * pointers that are overloaded to be
as many as 8 different data types and the driver translates the void * by
casting. This patch removes the void * pointers by declaring the specific
types needed by the driver. It also expands the context_un to include more
seldom used pointer types to save structure bytes. It also groups the u8
types together to pack the 8 bytes needed. This work allows the lpfc_iocbq
data structure to be more strongly typed and keeps it from being allocated
from the 512 byte slab.
[mkp: rolled in zeroday fix]
Link: https://lore.kernel.org/r/20220412222008.126521-21-jsmart2021@gmail.com Reported-by: kernel test robot <lkp@intel.com> Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:20:01 +0000 (15:20 -0700)]
scsi: lpfc: Introduce FC_RSCN_MEMENTO flag for tracking post RSCN completion
During an NVMe target reboot, the target may initialize itself as FCP only
during the first RSCN and shortly after trigger a second RSCN claiming NVMe
support. The timing of these RSCNs occur before FCP-PRLI for the first
RSCN completes leading discovery issues over NVMe.
Change RSCN and NVME-PRLI send logic based on a new FC_RSCN_MEMENTO flag
that signals when lpfc_end_rscn() is completed and serves as a memento that
discovery was started from RSCN.
Link: https://lore.kernel.org/r/20220412222008.126521-20-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:20:00 +0000 (15:20 -0700)]
scsi: lpfc: Register for Application Services FC-4 type in Fabric topology
Add new FC-4 type 0x60 Application Services for fabric registration when
VMID is enabled.
Modified rft struture to indicate __be format. Removed redundant ipReg
variable as it was not used.
Link: https://lore.kernel.org/r/20220412222008.126521-19-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:59 +0000 (15:19 -0700)]
scsi: lpfc: Remove false FDMI NVMe FC-4 support for NPIV ports
FDMI FC-4 Active Type for vports mistakenly shows NVMe support.
Add a check to only set the NVMe support bit for the physical port.
Link: https://lore.kernel.org/r/20220412222008.126521-18-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:58 +0000 (15:19 -0700)]
scsi: lpfc: Revise FDMI reporting of supported port speed for trunk groups
Trunk port FDMI supported port speed shows single port supported speed
rather than the trunked port speed.
Modify supported port speed logic calculation during registration.
Link: https://lore.kernel.org/r/20220412222008.126521-17-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
this_cpu_ptr() calls smp_processor_id() in a preemptible context.
Fix by using per_cpu_ptr() with raw_smp_processor_id() instead.
Link: https://lore.kernel.org/r/20220412222008.126521-16-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:56 +0000 (15:19 -0700)]
scsi: lpfc: Correct CRC32 calculation for congestion stats
lpfc_cgn_calc_crc32() is returning 32 bits, and lpfc_cgn_update_stat() was
using u16 to store the crc32 value. Correct by redeclaring the local
variable to u32.
Link: https://lore.kernel.org/r/20220412222008.126521-15-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:55 +0000 (15:19 -0700)]
scsi: lpfc: Move MI module parameter check to handle dynamic disable
lpfc_refresh_params() can be called for an async event handler. This could
potentially override the value initialized by lpfc_cmf_setup().
Move module parameter check to lpfc_refresh_params().
Link: https://lore.kernel.org/r/20220412222008.126521-14-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:54 +0000 (15:19 -0700)]
scsi: lpfc: Remove unnecessary NULL pointer assignment for ELS_RDF path
The command IOCB ndlp pointer is overwritten in lpfc_issue_els_rdf(), and
the original ndlp pointer is stored ahead of time.
This null ptr assignment can be safely removed.
Link: https://lore.kernel.org/r/20220412222008.126521-13-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:53 +0000 (15:19 -0700)]
scsi: lpfc: Transition to NPR state upon LOGO cmpl if link down or aborted
In P2P topology, a target controller reboot sometimes results in not
reestablishing a login because the ndlp is stuck in LOGO state.
Fix by transitioning to NPR state if we get link down before LOGO
completes.
Link: https://lore.kernel.org/r/20220412222008.126521-12-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:52 +0000 (15:19 -0700)]
scsi: lpfc: Update fc_prli_sent outstanding only after guaranteed IOCB submit
If lpfc_sli_issue_iocb() fails, then the fc_prli_sent is never decremented.
Move the fc_prli_sent++ to after a guaranteed IOCB submit.
Link: https://lore.kernel.org/r/20220412222008.126521-11-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:51 +0000 (15:19 -0700)]
scsi: lpfc: Protect memory leak for NPIV ports sending PLOGI_RJT
There is a potential memory leak in lpfc_ignore_els_cmpl() and
lpfc_els_rsp_reject() that was allocated from NPIV PLOGI_RJT
(lpfc_rcv_plogi()'s login_mbox).
Check if cmdiocb->context_un.mbox was allocated in lpfc_ignore_els_cmpl(),
and then free it back to phba->mbox_mem_pool along with mbox->ctx_buf for
service parameters.
For lpfc_els_rsp_reject() failure, free both the ctx_buf for service
parameters and the login_mbox.
Link: https://lore.kernel.org/r/20220412222008.126521-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:50 +0000 (15:19 -0700)]
scsi: lpfc: Fix null pointer dereference after failing to issue FLOGI and PLOGI
If lpfc_issue_els_flogi() fails and returns non-zero status, the node
reference count is decremented to trigger the release of the nodelist
structure. However, if there is a prior registration or dev-loss-evt work
pending, the node may be released prematurely. When dev-loss-evt
completes, the released node is referenced causing a use-after-free null
pointer dereference.
Similarly, when processing non-zero ELS PLOGI completion status in
lpfc_cmpl_els_plogi(), the ndlp flags are checked for a transport
registration before triggering node removal. If dev-loss-evt work is
pending, the node may be released prematurely and a subsequent call to
lpfc_dev_loss_tmo_handler() results in a use after free ndlp dereference.
Add test for pending dev-loss before decrementing the node reference count
for FLOGI, PLOGI, PRLI, and ADISC handling.
Link: https://lore.kernel.org/r/20220412222008.126521-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:49 +0000 (15:19 -0700)]
scsi: lpfc: Clear fabric topology flag before initiating a new FLOGI
Previous topologies may no longer be in fabric mode, so clear FC_FABRIC in
fc_flag for every new FLOGI.
Link: https://lore.kernel.org/r/20220412222008.126521-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix by reordering the taking of the lpfc_cmd->buf_lock and phba->hbalock in
lpfc_abort_handler routine so that it tries to take the lpfc_cmd->buf_lock
first before phba->hbalock.
Link: https://lore.kernel.org/r/20220412222008.126521-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:47 +0000 (15:19 -0700)]
scsi: lpfc: Requeue SCSI I/O to upper layer when fw reports link down
During heavy I/O stress tests with 100+ vports and cable pulls, it may take
a while before the vport logs back into the fabric to resume I/O.
Currently, the driver immediately fails the I/O with DID_ERROR.
Change behavior to return DID_REQUEUE, and rely on SCSI layer's max retry
of 5 before erroring out the I/O.
Link: https://lore.kernel.org/r/20220412222008.126521-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:46 +0000 (15:19 -0700)]
scsi: lpfc: Zero SLI4 fcp_cmnd buffer's fcpCntl0 field
It's possible that the fcpCntl0 reserved field is allocated non-zero.
For certain target storage arrays this could cause problems expecting
reserved fields to be all zero.
SLI3 path already allocates fcp_cmnd buffer with dma_pool_zalloc() in
lpfc_new_scsi_buf_s3. The fcpCntl0 field itself is never proactively set
throughout the SCSI I/O path. Thus, we only change the SLI4 fcp_cmnd
buffer allocation to dma_pool_zalloc.
Link: https://lore.kernel.org/r/20220412222008.126521-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:45 +0000 (15:19 -0700)]
scsi: lpfc: Fix diagnostic fw logging after a function reset
The lpfc_sli4_ras_setup() routine is only called from the
lpfc_pci_probe_one_s4() routine, which means diagnostic fw logging
initialization only occurs during probing.
Thus, any path involving a reset of the HBA that restarts the state of the
SLI port does not reinitialize diagnostic fw logging.
Move lpfc_sli4_ras_setup() into lpfc_sli4_hba_setup() so that the
LOWLEVEL_SET_DIAG_LOG_OPTIONS mailbox command can be sent after a function
reset.
Link: https://lore.kernel.org/r/20220412222008.126521-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The same CPU tries to claim the phba->port_list_lock twice.
Move the cfg_log_verbose checks as part of the lpfc_printf_vlog() and
lpfc_printf_log() macros before calling lpfc_dmp_dbg(). There is no need
to take the phba->port_list_lock within lpfc_dmp_dbg().
Link: https://lore.kernel.org/r/20220412222008.126521-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 12 Apr 2022 22:19:43 +0000 (15:19 -0700)]
scsi: lpfc: Tweak message log categories for ELS/FDMI/NVMe rescan
Several log message categories were updated:
- Enable msg 4623 (Xmit of ECD) to display for ELS logging.
- Change msg 0220 (FDMI cmd failed) to display for ELS logging.
- Change msg 6460 (FDMI RPA failure) to be warning not hard error.
- Change msg 6172 (NVME rescan of DID) to be logged under NVMe discovery.
Link: https://lore.kernel.org/r/20220412222008.126521-2-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Po-Wen Kao [Tue, 12 Apr 2022 07:31:28 +0000 (15:31 +0800)]
scsi: ufs: core: Remove redundant HPB unmap
Since the HPB mapping is already reset in ufshpb_init() by setting flag
QUERY_FLAG_IDN_HPB_RESET, there is no need doing so again in
ufshpb_hpb_lu_prepared().
This also resolves the issue where HPB WRITE BUFFER is issued before UAC is
cleared.
Mike Christie [Fri, 8 Apr 2022 00:13:14 +0000 (19:13 -0500)]
scsi: iscsi: MAINTAINERS: Add Mike Christie as co-maintainer
I've been doing a lot of iscsi patches because Oracle is paying me to work
on iSCSI again. It was supposed to be temp assignment, but my co-worker
that was working on iscsi moved to a new group so it looks like I'm back on
this code again. After talking to Chris and Lee this patch adds me back as
co-maintainer, so I can help them and people remember to cc me on issues.
Link: https://lore.kernel.org/r/20220408001314.5014-11-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Acked-by: Lee Duncan <lduncan@suse.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Fri, 8 Apr 2022 00:13:13 +0000 (19:13 -0500)]
scsi: qedi: Fix failed disconnect handling
We set the qedi_ep state to EP_STATE_OFLDCONN_START when the ep is
created. Then in qedi_set_path we kick off the offload work. If userspace
times out the connection and calls ep_disconnect, qedi will only flush the
offload work if the qedi_ep state has transitioned away from
EP_STATE_OFLDCONN_START. If we can't connect we will not have transitioned
state and will leave the offload work running, and we will free the qedi_ep
from under it.
This patch just has us init the work when we create the ep, then always
flush it.
Link: https://lore.kernel.org/r/20220408001314.5014-10-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Fri, 8 Apr 2022 00:13:12 +0000 (19:13 -0500)]
scsi: iscsi: Fix NOP handling during conn recovery
If a offload driver doesn't use the xmit workqueue, then when we are doing
ep_disconnect libiscsi can still inject PDUs to the driver. This adds a
check for if the connection is bound before trying to inject PDUs.
Link: https://lore.kernel.org/r/20220408001314.5014-9-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Fri, 8 Apr 2022 00:13:11 +0000 (19:13 -0500)]
scsi: iscsi: Merge suspend fields
Move the tx and rx suspend fields into one flags field.
Link: https://lore.kernel.org/r/20220408001314.5014-8-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Fri, 8 Apr 2022 00:13:10 +0000 (19:13 -0500)]
scsi: iscsi: Fix unbound endpoint error handling
If a driver raises a connection error before the connection is bound, we
can leave a cleanup_work queued that can later run and disconnect/stop a
connection that is logged in. The problem is that drivers can call
iscsi_conn_error_event for endpoints that are connected but not yet bound
when something like the network port they are using is brought down.
iscsi_cleanup_conn_work_fn will check for this and exit early, but if the
cleanup_work is stuck behind other works, it might not get run until after
userspace has done ep_disconnect. Because the endpoint is not yet bound
there was no way for ep_disconnect to flush the work.
The bug of leaving stop_conns queued was added in:
Mike Christie [Fri, 8 Apr 2022 00:13:09 +0000 (19:13 -0500)]
scsi: iscsi: Fix conn cleanup and stop race during iscsid restart
If iscsid is doing a stop_conn at the same time the kernel is starting
error recovery we can hit a race that allows the cleanup work to run on a
valid connection. In the race, iscsi_if_stop_conn sees the cleanup bit set,
but it calls flush_work on the clean_work before iscsi_conn_error_event has
queued it. The flush then returns before the queueing and so the
cleanup_work can run later and disconnect/stop a conn while it's in a
connected state.
attempted to fix it but only fixed the normal EH case and left the above
race for the iscsid restart case. For the normal EH case we don't hit the
race because we only signal userspace to start recovery after we have done
the queueing, so the flush will always catch the queued work or see it
completed.
For iscsid restart cases like boot, we can hit the race because iscsid will
call down to the kernel before the kernel has signaled any error, so both
code paths can be running at the same time. This adds a lock around the
setting of the cleanup bit and queueing so they happen together.
Link: https://lore.kernel.org/r/20220408001314.5014-6-michael.christie@oracle.com Fixes: 85050f4584c0 ("scsi: iscsi: Perform connection failure entirely in kernel space") Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Fri, 8 Apr 2022 00:13:08 +0000 (19:13 -0500)]
scsi: iscsi: Fix endpoint reuse regression
This patch fixes a bug where when using iSCSI offload we can free an
endpoint while userspace still thinks it's active. That then causes the
endpoint ID to be reused for a new connection's endpoint while userspace
still thinks the ID is for the original connection. Userspace will then end
up disconnecting a running connection's endpoint or trying to bind to
another connection's endpoint.
where we would call stop_conn without having done ep_disconnect. This early
ep_disconnect call will then free the endpoint and it's ID while userspace
still thinks the ID is valid.
Fix the early release of the ID by having the in kernel recovery code keep
a reference to the endpoint until userspace has called into the kernel to
finish cleaning up the endpoint/connection. It requires the previous commit
"scsi: iscsi: Release endpoint ID when its freed" which moved the freeing
of the ID until when the endpoint is released.
Link: https://lore.kernel.org/r/20220408001314.5014-5-michael.christie@oracle.com Fixes: 9c7bfabc5371 ("scsi: iscsi: Fix in-kernel conn failure handling") Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Fri, 8 Apr 2022 00:13:07 +0000 (19:13 -0500)]
scsi: iscsi: Release endpoint ID when its freed
We can't release the endpoint ID until all references to the endpoint have
been dropped or it could be allocated while in use. This has us use an idr
instead of looping over all conns to find a free ID and then free the ID
when all references have been dropped instead of when the device is only
deleted.
Link: https://lore.kernel.org/r/20220408001314.5014-4-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Reviewed-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Fri, 8 Apr 2022 00:13:06 +0000 (19:13 -0500)]
scsi: iscsi: Fix offload conn cleanup when iscsid restarts
When userspace restarts during boot or upgrades it won't know about the
offload driver's endpoint and connection mappings. iscsid will start by
cleaning up the old session by doing a stop_conn call. Later, if we are
able to create a new connection, we clean up the old endpoint during the
binding stage. The problem is that if we do stop_conn before doing the
ep_disconnect call offload, drivers can still be executing I/O. We then
might free tasks from the under the card/driver.
This moves the ep_disconnect call to before we do the stop_conn call for
this case. It will then work and look like a normal recovery/cleanup
procedure from the driver's point of view.
Link: https://lore.kernel.org/r/20220408001314.5014-3-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Fri, 8 Apr 2022 00:13:05 +0000 (19:13 -0500)]
scsi: iscsi: Move iscsi_ep_disconnect()
This patch moves iscsi_ep_disconnect() so it can be called earlier in the
next patch.
Link: https://lore.kernel.org/r/20220408001314.5014-2-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Executing driver on servers with more than 32 CPUs were faced with command
timeouts. This is because we were not geting completions for commands
submitted on IQ32 - IQ63.
Set E64Q bit to enable upper inbound and outbound queues 32 to 63 in the
MPI main configuration table.
Added 500ms delay after successful MPI initialization as mentioned in
controller datasheet.
Link: https://lore.kernel.org/r/20220411064603.668448-3-Ajish.Koshy@microchip.com Fixes: 7266bb90ee0d ("scsi: pm80xx: Increase number of supported queues") Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: pm80xx: Mask and unmask upper interrupt vectors 32-63
When upper inbound and outbound queues 32-63 are enabled, we see upper
vectors 32-63 in interrupt service routine. We need corresponding registers
to handle masking and unmasking of these upper interrupts.
To achieve this, we use registers MSGU_ODMR_U(0x34) to mask and
MSGU_ODMR_CLR_U(0x3C) to unmask the interrupts. In these registers bit 0-31
represents interrupt vectors 32-63.
Link: https://lore.kernel.org/r/20220411064603.668448-2-Ajish.Koshy@microchip.com Fixes: 7266bb90ee0d ("scsi: pm80xx: Increase number of supported queues") Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Revert "scsi: scsi_debug: Address races following module load"
Revert the patch mentioned in the subject since it blocks I/O after module
unload has started while this is a legitimate use case. For e.g. blktests
test case srp/001 that patch causes a command timeout to be triggered for
the following call stack:
Link: https://lore.kernel.org/r/20220409043704.28573-1-bvanassche@acm.org Fixes: 23acddff7b03 ("scsi: scsi_debug: Address races following module load") Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Yi Zhang <yi.zhang@redhat.com> Cc: Bob Pearson <rpearsonhpe@gmail.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
The megaraid_sas driver supports single LUN for RAID devices. That is LUN
0. All other LUNs are unsupported. When a device scan on a logical target
with invalid LUN number is invoked through sysfs, that target ends up
getting removed.
Add LUN ID validation in the slave destroy function to avoid the target
deletion.
Xiaomeng Tong [Sun, 20 Mar 2022 15:07:33 +0000 (23:07 +0800)]
scsi: ufs: ufshpb: Fix a NULL check on list iterator
The list iterator is always non-NULL so the check 'if (!rgn)' is always
false and the dev_err() is never called. Move the check outside the loop
and determine if 'victim_rgn' is NULL, to fix this bug.
Link: https://lore.kernel.org/r/20220320150733.21824-1-xiam0nd.tong@gmail.com Fixes: ca2f60808241 ("scsi: ufs: ufshpb: L2P map management for HPB read") Reviewed-by: Daejun Park <daejun7.park@samsung.com> Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: sd: Clean up gendisk if device_add_disk() failed
We forgot to call blk_cleanup_disk() when device_add_disk() failed. This
would cause a memory leak of gendisk and sched_tags allocated in
elevator_init_mq()
scsi: target: Allow changing dbroot if there are no registered devices
The target driver prevents the users from changing the database root
directory if a target module like ib_srpt has been registered. This makes
it difficult for users to set their preferred database directory if the
module gets loaded during the system boot.
Let the users modify dbroot if there are no registered devices
Variable dmp is being assigned a value that is never read, the variable is
redundant and can be removed.
Cleans up clang scan build warning:
drivers/message/fusion/mptbase.c:6667:39: warning: Although
the value stored to 'dmp' is used in the enclosing expression,
the value is never actually read from 'dmp' [deadcode.DeadStores]
Alexey Galakhov [Wed, 9 Mar 2022 21:25:35 +0000 (22:25 +0100)]
scsi: mvsas: Add PCI ID of RocketRaid 2640
The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell
chip. The chip in question was already supported by the kernel, just the
PCI ID of this particular board was missing.
As such it should be called inside the scsi_device_supports_vpd()
conditional.
Link: https://lore.kernel.org/r/20220302053559.32147-13-martin.petersen@oracle.com Fixes: e09f2fac4a6e ("scsi: sd: add concurrent positioning ranges support") Cc: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: mpt3sas: Fail reset operation if config request timed out
As part of controller reset operation the driver issues a config request
command. If this command gets times out, then fail the controller reset
operation instead of retrying it.
Finn Thain [Wed, 6 Apr 2022 09:05:39 +0000 (19:05 +1000)]
scsi: sym53c500_cs: Stop using struct scsi_pointer
This driver doesn't use SCp.ptr to save a SCSI command data pointer which
means "scsi pointer" is a complete misnomer here. Only a few members of
struct scsi_pointer are needed so move those to private command data.
The start_addres argument of mpt3sas_check_same_4gb_region() was misnamed
in the function kdoc comment, resulting in the following warning when
compiling with W=1.
drivers/scsi/mpt3sas/mpt3sas_base.c:5728: warning: Function parameter or
member 'start_address' not described in 'mpt3sas_check_same_4gb_region'
drivers/scsi/mpt3sas/mpt3sas_base.c:5728: warning: Excess function
parameter 'reply_pool_start_address' description in
'mpt3sas_check_same_4gb_region'
Fix the argument name in the function kdoc comment to avoid it. While at
it, remove a useless blank line between the kdoc and function code.
Damien Le Moal [Mon, 4 Apr 2022 04:55:47 +0000 (13:55 +0900)]
scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap use
The in_use_bm bitmap of struct sdebug_queue should be accessed under
protection of the qc_lock spinlock. Make sure that this lock is taken
before calling find_first_bit() at the beginning of the function
sdebug_blk_mq_poll().
Link: https://lore.kernel.org/r/20220404045547.579887-1-damien.lemoal@opensource.wdc.com Fixes: 7a5e7fcd83d1 ("scsi: scsi_debug: Fix qc_lock use in sdebug_blk_mq_poll()") Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
Merge tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
Merge tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
Stephen Boyd [Sun, 3 Apr 2022 02:28:18 +0000 (19:28 -0700)]
Revert "clk: Drop the rate range on clk_put()"
This reverts commit eaef78700d60cb45dcf7b268fee78e7230b54c62. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources: socket,
mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Convert tracepoint.py example to python3
perf evlist: Directly return instead of using local ret variable
perf cpumap: More cpu map reuse by merge.
perf cpumap: Add is_subset function
perf evlist: Rename cpus to user_requested_cpus
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf beauty: Update copy of linux/socket.h with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
perf stat: Avoid SEGV if core.cpus isn't set
Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix empty $(PYTHON) expansion.
- Fix UML, which got broken by the attempt to suppress Clang warnings.
- Fix warning message in modpost.
* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: restore the warning message for missing symbol versions
Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
kbuild: Remove '-mno-global-merge'
kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
kconfig: remove stale comment about removed kconfig_print_symbol()
Merge tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- build fix for gpio
- fix crc32 build problems
- check for failed memory allocations
* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: crypto: Fix CRC32 code
MIPS: rb532: move GPIOD definition into C-files
MIPS: lantiq: check the return value of kzalloc()
mips: sgi-ip22: add a check for the return of kzalloc()
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block
Pull block driver fix from Jens Axboe:
"Got two reports on nbd spewing warnings on load now, which is a
regression from a commit that went into your tree yesterday.
Revert the problematic change for now"
* tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block:
Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
Merge tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Check for EC device - Fix a crash when using the cros_ec_typec
driver on older hardware not capable of typec commands
- Make try power role optional
- Mux configuration reorganization series from Prashant
cros_ec_debugfs:
- Fix use after free. Thanks Tzung-bi
sensorhub:
- cros_ec_sensorhub fixup - Split trace include file
misc:
- Add new mailing list for chrome-platform development:
chrome-platform@lists.linux.dev
Now with patchwork!"
* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_debugfs: detach log reader wq from devm
platform: chrome: Split trace include file
platform/chrome: cros_ec_typec: Update mux flags during partner removal
platform/chrome: cros_ec_typec: Configure muxes at start of port update
platform/chrome: cros_ec_typec: Get mux state inside configure_mux
platform/chrome: cros_ec_typec: Move mux flag checks
platform/chrome: cros_ec_typec: Check for EC device
platform/chrome: cros_ec_typec: Make try power role optional
MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
After being merged, user_events become more visible to a wider audience
that have concerns with the current API.
It is too late to fix this for this release, but instead of a full
revert, just mark it as BROKEN (which prevents it from being selected in
make config). Then we can work finding a better API. If that fails,
then it will need to be completely reverted.
To not have the code silently bitrot, still allow building it with
COMPILE_TEST.
And to prevent the uapi header from being installed, then later changed,
and then have an old distro user space see the old version, move the
header file out of the uapi directory.
Surround the include with CONFIG_COMPILE_TEST to the current location,
but when the BROKEN tag is taken off, it will use the uapi directory,
and fail to compile. This is a good way to remind us to move the header
back.
tracing: Move user_events.h temporarily out of include/uapi
While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.
Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.
Christophe Leroy [Wed, 30 Mar 2022 07:00:19 +0000 (09:00 +0200)]
ftrace: Make ftrace_graph_is_dead() a static branch
ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.
For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().
While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.
Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.
After being merged, user_events become more visible to a wider audience
that have concerns with the current API. It is too late to fix this for
this release, but instead of a full revert, just mark it as BROKEN (which
prevents it from being selected in make config). Then we can work finding
a better API. If that fails, then it will need to be completely reverted.
tracing: Rename the staging files for trace_events
When looking for implementation of different phases of the creation of the
TRACE_EVENT() macro, it is pretty useless when all helper macro
redefinitions are in files labeled "stageX_defines.h". Rename them to
state which phase the files are for. For instance, when looking for the
defines that are used to create the event fields, seeing
"stage4_event_fields.h" gives the developer a good idea that the defines
are in that file.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Li RongQing [Wed, 9 Mar 2022 08:35:44 +0000 (16:35 +0800)]
KVM: x86: fix sending PV IPI
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: 189dfa9f93d ("KVM: X86: Implement PV IPIs in linux guest") Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 29 Mar 2022 16:56:24 +0000 (12:56 -0400)]
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit cf2aaeb94b9a ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <qiuhao@sysec.org> Reported-by: Gaoning Pan <pgn@zju.edu.cn> Reported-by: Yongkang Jia <kangel@zju.edu.cn> Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Cc: stable@vger.kernel.org Fixes: f335d3af0395 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulating exit from long mode, EFER_LMA is cleared with
vmx_set_efer(). This will already unset the VM_ENTRY_IA32E_MODE control
bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE
again in exit_lmode() explicitly. In case EFER isn't supported by
hardware, long mode isn't supported, so exit_lmode() cannot be reached.
Note that, thanks to the shadow controls mechanism, this change doesn't
eliminate vmread or vmwrite.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-3-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zhenzhong Duan [Fri, 11 Mar 2022 10:26:42 +0000 (18:26 +0800)]
KVM: x86: cleanup enter_rmode()
vmx_set_efer() sets uret->data but, in fact if the value of uret->data
will be used vmx_setup_uret_msrs() will have rewritten it with the value
returned by update_transition_efer(). uret->data is consumed if and only
if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care
of (a) updating uret->data before setting uret->load_into_hardware to true
(b) setting uret->load_into_hardware to false if uret->data isn't updated.
Opportunistically use "vmx" directly instead of redoing to_vmx().
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-2-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sun, 13 Mar 2022 14:05:22 +0000 (15:05 +0100)]
KVM: MIPS: remove reference to trap&emulate virtualization
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220313140522.1307751-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 15 Mar 2022 22:17:15 +0000 (18:17 -0400)]
KVM: x86: document limitations of MSR filtering
MSR filtering requires an exit to userspace that is hard to implement and
would be very slow in the case of nested VMX vmexit and vmentry MSR
accesses. Document the limitation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hou Wenlong [Mon, 7 Mar 2022 12:26:33 +0000 (20:26 +0800)]
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
If MSR access is rejected by MSR filtering,
kvm_set_msr()/kvm_get_msr() would return KVM_MSR_RET_FILTERED,
and the return value is only handled well for rdmsr/wrmsr.
However, some instruction emulation and state transition also
use kvm_set_msr()/kvm_get_msr() to do msr access but may trigger
some unexpected results if MSR access is rejected, E.g. RDPID
emulation would inject a #UD but RDPID wouldn't cause a exit
when RDPID is supported in hardware and ENABLE_RDTSCP is set.
And it would also cause failure when load MSR at nested entry/exit.
Since msr filtering is based on MSR bitmap, it is better to only
do MSR filtering for rdmsr/wrmsr.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <2b2774154f7532c96a6f04d71c82a8bec7d9e80b.1646655860.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hou Wenlong [Wed, 2 Mar 2022 13:15:14 +0000 (21:15 +0800)]
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
When RDTSCP is supported but RDPID is not supported in host,
RDPID emulation is available. However, __kvm_get_msr() would
only fail when RDTSCP/RDPID both are disabled in guest, so
the emulator wouldn't inject a #UD when RDPID is disabled but
RDTSCP is enabled in guest.
Like Xu [Wed, 9 Mar 2022 08:42:57 +0000 (16:42 +0800)]
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
HSW_IN_TX* bits are used in generic code which are not supported on
AMD. Worse, these bits overlap with AMD EventSelect[11:8] and hence
using HSW_IN_TX* bits unconditionally in generic code is resulting in
unintentional pmu behavior on AMD. For example, if EventSelect[11:8]
is 0x2, pmc_reprogram_counter() wrongly assumes that
HSW_IN_TX_CHECKPOINTED is set and thus forces sampling period to be 0.
Also per the SDM, both bits 32 and 33 "may only be set if the processor
supports HLE or RTM" and for "IN_TXCP (bit 33): this bit may only be set
for IA32_PERFEVTSEL2."
Opportunistically eliminate code redundancy, because if the HSW_IN_TX*
bit is set in pmc->eventsel, it is already set in attr.config.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reported-by: Jim Mattson <jmattson@google.com> Fixes: 63ed641cef8f ("perf, kvm: Support the in_tx/in_tx_cp modifiers in KVM arch perfmon emulation v5") Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220309084257.88931-1-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Sat, 26 Feb 2022 23:41:31 +0000 (15:41 -0800)]
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some
reserved bits are cleared, and some are not. Specifically, on
Zen3/Milan, bits 19 and 42 are not cleared.
When emulating such a WRMSR, KVM should not synthesize a #GP,
regardless of which bits are set. However, undocumented bits should
not be passed through to the hardware MSR. So, rather than checking
for reserved bits and synthesizing a #GP, just clear the reserved
bits.
This may seem pedantic, but since KVM currently does not support the
"Host/Guest Only" bits (41:40), it is necessary to clear these bits
rather than synthesizing #GP, because some popular guests (e.g Linux)
will set the "Host Only" bit even on CPUs that don't support
EFER.SVME, and they don't expect a #GP.
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30)
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379958] Call Trace:
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379963] amd_pmu_disable_event+0x27/0x90
Fixes: ad8737ca5403 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Reported-by: Lotus Fenn <lotusf@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Like Xu <likexu@tencent.com> Reviewed-by: David Dunn <daviddunn@google.com>
Message-Id: <20220226234131.2167175-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / kernel.git / log