Yan Zhao [Tue, 11 Aug 2020 06:09:44 +0000 (14:09 +0800)]
drm/i915/gvt: rename F_IN_CTX flag to F_SR_IN_CTX
F_IN_CTX is an inaccurate flag name, because people may wrongly think all
MMIOs in context image are with this flag. But actually, this flag is only
for MMIOs both in GVT's save-restore list and in hardare logical
context's image.
drm/i915: Initial implementation of PSR2 selective fetch
All GEN12 platforms supports PSR2 selective fetch but not all GEN12
platforms supports PSR2 hardware tracking(aka RKL).
This feature consists in software programming registers with the
damaged area of each plane this way hardware will only fetch from
memory those areas and sent the PSR2 selective update blocks to panel,
saving even more power.
But as initial step it is only enabling the full frame fetch at
every flip, the actual selective fetch part will come in a future
patch.
Also this is only handling the page flip side, it is still completely
missing frontbuffer modifications, that is why the
enable_psr2_sel_fetch parameter was added.
v3:
- calling intel_psr2_sel_fetch_update() during the atomic check phase
(Ville)
BSpec: 55229 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200810174144.76761-1-jose.souza@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Matt Roper [Tue, 11 Aug 2020 03:21:05 +0000 (20:21 -0700)]
drm/i915/kbl: Fix revision ID checks
We usually assume that increasing PCI device revision ID's translates to
newer steppings; macros like IS_KBL_REVID() that we use rely on this
behavior. Unfortunately this turns out to not be true on KBL; the
newer device 2 revision ID's sometimes go backward to older steppings.
The situation is further complicated by different GT and display
steppings associated with each revision ID.
Let's work around this by providing a table to map the revision ID to
specific GT and display steppings, and then perform our comparisons on
the mapped values.
v2:
- Move the kbl_revids[] array to intel_workarounds.c to avoid compiler
warnings about an unused variable in files that don't call the
macros (kernel test robot).
There is no way to differentiate TGL-U from TGL-Y by the PCI ids as
some ids are available in both SKUs.
So here using the root device id in the PCI bus that iGPU is in
to differentiate between U and Y.
Imre Deak [Wed, 5 Aug 2020 15:00:56 +0000 (18:00 +0300)]
drm/i915/tgl: Fix TC-cold block/unblock sequence
The command register is the PCODE MBOX low register not the high one as
described by the spec. This left the system with the TC-cold power state
being blocked all the time. Fix things by using the correct register.
Also to make sure we retry a request for at least 600usec, when the
PCODE MBOX command itself succeeded, but the TC-cold block command
failed, sleep for 1msec unconditionally after any fail.
The change was tested with JTAG register read of the HW/FW's actual
TC-cold state, which reported the expected states after this change.
Tested-by: Nivedita Swaminathan <nivedita.swaminathan@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200805150056.24248-1-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Imre Deak [Mon, 20 Jul 2020 23:29:52 +0000 (02:29 +0300)]
drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells
The dependency between power wells is determined by the ordering of the
power well list: when enabling the power wells for a domain, this
happens walking the power well list forward, while disabling them
happens in the reverse direction. Accordingly a power well on the list
must follow any other power well it depends on.
Since the TC AUX power wells depend on TC-cold being blocked, move the
TC-cold off power well before all AUX power wells.
Fixes: 3c02934b24e3 ("drm/i915/tc/tgl: Implement TC cold sequences") Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
George Spelvin [Wed, 25 Mar 2020 19:24:29 +0000 (19:24 +0000)]
drm/i915/selftests: Avoid passing a random 0 into ilog2
igt_mm_config() calls ilog2() on the (pseudo)random 21-bit number
s>>12. Once in 2 million seeds, this is zero and ilog2 summons
the nasal demons.
There was an attempt to handle this case with a max(), but that's
too late; ms could already be something bizarre.
Given that the low 12 bits of s and ms are always zero, it's a lot
simpler just to divide them by 4096, then everything fits into 32
bits, and we can easily generate a random number 1 <= s <= 0x1fffff.
Fixes: 14d1b9a6247c ("drm/i915: buddy allocator") Signed-off-by: George Spelvin <lkml@sdf.org> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200325192429.GA8865@SDF.ORG Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tianjia Zhang [Sun, 2 Aug 2020 11:56:55 +0000 (12:56 +0100)]
drm/i915: Fix wrong return value
In function i915_active_acquire_preallocate_barrier(), not all
paths have the return value set correctly, and in case of memory
allocation failure, a negative error code should be returned.
Chris Wilson [Fri, 31 Jul 2020 08:50:09 +0000 (09:50 +0100)]
drm/i915: Add a couple of missing i915_active_fini()
We use i915_active_fini() as a debug check on the i915_active state
before freeing. If we forget to call it, we may end up angering the
debugobjects contained within.
Chris Wilson [Tue, 28 Jul 2020 15:22:19 +0000 (16:22 +0100)]
drm/i915: Remove gen check before calling intel_rps_boost
It's been a while since gen6_rps_boost() [that only worked on gen6+] was
replaced by intel_rps_boost() that understood itself when rps was
active. Since the intel_rps_boost() is gen-agnostic, just call it.
Matt Roper [Thu, 16 Jul 2020 22:05:51 +0000 (15:05 -0700)]
drm/i915/rkl: Add Wa_14011224835 for PHY B initialization
After doing normal PHY-B initialization on Rocket Lake, we need to
manually copy some additional PHY-A register values into PHY-B
registers.
Note that the bspec's combo phy page doesn't specify that this
workaround is restricted to specific platform steppings (and doesn't
even do a very good job of specifying that RKL is the only platform this
is needed on), but the RKL workaround page lists this as relevant only
for A and B steppings, so I'm trusting that information for now.
v2: Make rkl_combo_phy_b_init_wa() static
v3:
- Minimize variables in WA function. (Jose)
- Fix timeout duration (usec vs msec). (Jose)
- Add verification of workaround. (Jose)
- Fix stepping bounds in comment.
Matt Roper [Thu, 16 Jul 2020 22:05:50 +0000 (15:05 -0700)]
drm/i915/rkl: Handle HTI
If HTI (also sometimes called HDPORT) is enabled at startup, it may be
using some of the PHYs and DPLLs making them unavailable for general
usage. Let's read out the HDPORT_STATE register and avoid making use of
resources that HTI is already using.
v2:
- Fix minor checkpatch warnings
v3:
- Just readout HDPORT_STATE register once during init and then parse it
later as needed.
- Add a 'has_hti' device info flag to track whether we should readout
HDPORT_STATE or not. We can skip the platform/flag tests later since
the hti_state in dev_priv will remain 0 for platforms it does not
apply to.
- Move PLL masking into icl_get_combo_phy_dpll() since at the moment
RKL is the only platform that has HTI. (Jose)
Bspec: 49189
Bspec: 53707 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-5-matthew.d.roper@intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Matt Roper [Thu, 16 Jul 2020 22:05:49 +0000 (15:05 -0700)]
drm/i915/rkl: Add DPLL4 support
Rocket Lake has a third DPLL (called 'DPLL4') that must be used to
enable a third display. Unlike EHL's variant of DPLL4, the RKL variant
behaves the same as DPLL0/1. And despite its name, the DPLL4 registers
are offset as if it were DPLL2.
v2:
- Add new .update_ref_clks() hook.
v3:
- Renumber TBT PLL to '3' and switch _MMIO_PLL3 to _MMIO_PLL (Lucas)
v4:
- Don't drop _MMIO_PLL3; although it's now unused, we're going to need
it very soon again for upcoming DG1 patches. (Lucas)
v5:
- Don't re-number TBT PLL and beyond, just use new RKL_DPLL_CFGCR
macros to lookup the proper registers instead. Although renumbering
the PLLs might be something we want to consider down the road, it
opens a big can of worms right now since a bunch of places in the
code have an assumption that the PLL table has idx==id and no holes.
Renumbering creates a hole for TGL, so we'd either need to allow
holes in the table or break the idx==id invariant, both of which are
somewhat invasive changes to the design.
Bspec: 49202
Bspec: 49443
Bspec: 50288
Bspec: 50289 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-4-matthew.d.roper@intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Matt Roper [Thu, 16 Jul 2020 22:05:48 +0000 (15:05 -0700)]
drm/i915/rkl: Add initial workarounds
RKL and TGL share some general gen12 workarounds, but each platform also
has its own platform-specific workarounds.
v2:
- Add Wa_1604555607 for RKL. This makes RKL's ctx WA list identical to
TGL's, so we'll have both functions call the tgl_ function for now;
this workaround isn't listed for DG1 so we don't want to add it to
the general gen12_ function.
Ville Syrjälä [Thu, 16 Jul 2020 19:04:25 +0000 (22:04 +0300)]
drm/i915: Move WaDisableDopClockGating:skl to skl_init_clock_gating()
It's silly to have if(SKL) checks in gen9_init_clock_gating() when
we can just move those bits into skl_init_clock_gating().
I'm not entirely convinced we even need this w/a, or if we do
then maybe we want it for kbl/cfl as well. IIRC it was only
listed in the wadb, but that is now dead so can't double check
anymore. Bspec doesn't seem to have any purely skl specific
DOP clock gating workarounds listed.
Hours Of Battery Life is a new GEN12+ power-saving feature that allows
supported motherboards to use a special voltage swing table for eDP
panels that uses less power.
So here if supported by HW, OEM will set it in VBT and i915 will try
to train link with HOBL vswing table if link training fails it fall
back to the original table.
intel_ddi_dp_preemph_max() was optimized to only check the HOBL flag
instead of do something like is done in intel_ddi_dp_voltage_max()
because it is only called after the first entry of the voltage swing
table was loaded so the HOBL flag is valid at that point.
v3:
- removed a few parameters of icl_ddi_combo_vswing_program() that
can be taken from encoder
v4:
- using the HOBL vswing table until training fails completely (Ville)
v5:
- not reducing lane or link rate when link training fails with HOBL
active
- duplicated the HOBL voltage swing entry to match DP spec requirement
v6:
- removed the optional VS 3 & pre-emp 0 from HOBL table
- changed from u8:1 to bool to store hobl_failed/active
BSpec: 49291
BSpec: 49399 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200715175637.33763-1-jose.souza@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
0x0155 is rather Ivy Bridge PCI-E Root Port.
0x0157 from the same commit ff049b6ce21d ("drm/i915: bind driver to ValleyView chipsets")
is likely wrong too. Nowhere is it independetly confirmed or mentioned.
Chris Wilson [Thu, 16 Jul 2020 09:46:43 +0000 (10:46 +0100)]
drm/i915: Provide the perf pmu.module
Rather than manually implement our own module reference counting for perf
pmu events, finally realise that there is a module parameter to struct
pmu for this very purpose.
Imre Deak [Tue, 14 Jul 2020 15:31:41 +0000 (18:31 +0300)]
drm/i915/ddi: Don't rewrite DDI_BUF_CTL reg during DP link training
The value we program to DDI_BUF_CTL changes at the following places:
- At enabling/disabling the output to configure the port width etc, and
to enable/disable the DDI BUF function.
- At the beginning/end of link re-training to disable/re-enable the DDI
BUF function.
- On HSW/BDW/SKL to change the voltage swing/pre-emph levels.
Except of the above the value we program to the DDI_BUF_CTL register
(intel_dp->DP) doesn't change, so no need to reprogram the register when
changing the link training patterns (which is programmed via the
DP_TP_CTL register on DDI platforms).
v2:
- Fix the commit message wrt. voltage/pre-emph level values in
intel_dp->DP. (Ville)
Imre Deak [Tue, 14 Jul 2020 15:31:40 +0000 (18:31 +0300)]
drm/i915/ddi: Don't frob the DP link scramble disabling flag
According to BSpec this flag should not be changed while the DDI
function is enabled. On BDW+ the DP_TP_CTL register spec also states it
explicitly that the HW takes care of enabling/disabling the scrambling
for training patterns (and it must stay enabled for normal pixel
output). Assume that this HW automatic handling of scrambling is also
true for HSW.
Ville Syrjälä [Tue, 14 Jul 2020 15:26:25 +0000 (18:26 +0300)]
drm/i915: Make i830 .get_cdclk() assignment less confusing
Explicitly check for i830 when assigning the .get_cdclk() vfunc,
and then deal with the case of not having assigned the vfunc
separately. Less confusing, and gets rid of the checkpatch complaint
about using {} on one branch but not the others.
Ville Syrjälä [Tue, 14 Jul 2020 20:19:45 +0000 (23:19 +0300)]
drm/i915/fbc: Limit cfb to the first 256MiB of stolen on g4x+
Since g4x the CFB base only takes a 28bit offset into stolen.
Not sure if the CFB is allowed to start below that limit but
then extend beyond it. Let's assume not and just restrict the
allocation to the first 256MiB (in the unlikely case
we have more stolen than that).
Dave Airlie [Wed, 12 Aug 2020 02:58:19 +0000 (12:58 +1000)]
Merge branch 'vmwgfx-next-5.9' of git://people.freedesktop.org/~sroland/linux into drm-next
The drm_mode_config_reset patches are very important fixing a recently
introduced kernel crash, the others fix various older issues which are
a bit less serious in practice.
Dave Airlie [Tue, 11 Aug 2020 01:59:19 +0000 (11:59 +1000)]
Merge tag 'drm-misc-fixes-2020-08-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
* backmerge from drm-fixes at v5.8-rc7
* add orientation quirk for ASUS T103HAF
* drm/omap: force runtime PM suspend on system suspend
* drm/tidss: fix modeset init for DPI panels
* re-added docs for drm_gem_flink_ioctl()
* ttm: fix page-offset calculation within TTM
Daniel Vetter [Thu, 6 Aug 2020 15:42:27 +0000 (17:42 +0200)]
drm/vmwgfx/stdu: Use drm_mode_config_reset
When converting to atomic the state reset was done by directly calling
the functions, and before the modeset object was fully initialized.
This means the various ->dev pointers weren't set up.
this started to oops because now we're trying to derefence
drm_crtc->dev. Fix this up by entirely switching over to
drm_mode_config_reset, called once everything is set up.
Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Dan Carpenter [Fri, 26 Jun 2020 10:39:59 +0000 (13:39 +0300)]
drm/vmwgfx: Fix two list_for_each loop exit tests
These if statements are supposed to be true if we ended the
list_for_each_entry() loops without hitting a break statement but they
don't work.
In the first loop, we increment "i" after the "if (i == unit)" condition
so we don't necessarily know that "i" is not equal to unit at the end of
the loop.
In the second loop we exit when mode is not pointing to a valid
drm_display_mode struct so it doesn't make sense to check "mode->type".
Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Dan Carpenter [Fri, 26 Jun 2020 10:34:37 +0000 (13:34 +0300)]
drm/vmwgfx: Use correct vmw_legacy_display_unit pointer
The "entry" pointer is an offset from the list head and it doesn't
point to a valid vmw_legacy_display_unit struct. Presumably the
intent was to point to the last entry.
Also the "i++" wasn't used so I have removed that as well.
Fixes: d7e1958dbe4a ("drm/vmwgfx: Support older hardware.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Dave Airlie [Tue, 11 Aug 2020 00:56:11 +0000 (10:56 +1000)]
Merge tag 'drm-misc-next-fixes-2020-08-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next-fixes for v5.9-rc1:
- Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi
- Fix a fbcon OOB read in fbdev, found by syzbot.
- Mark vga_tryget static as it's not used elsewhere.
- Small fixes to xlnx.
- Remove null check for kfree in drm_dev_release.
- Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition.
- Fix mode initialization in omap_connector_mode_valid().
drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume
Reproducing bug report here:
After hibernating and resuming, DPM is not enabled. This remains the case
even if you test hibernate using the steps here:
https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html
I debugged the problem, and figured out that in the file hardwaremanager.c,
in the function, phm_enable_dynamic_state_management(), the check
'if (!hwmgr->pp_one_vf && smum_is_dpm_running(hwmgr) && !amdgpu_passthrough(adev) && adev->in_suspend)'
returns true for the hibernate case, and false for the suspend case.
This means that for the hibernate case, the AMDGPU driver doesn't enable DPM
(even though it should) and simply returns from that function.
In the suspend case, it goes ahead and enables DPM, even though it doesn't need to.
I debugged further, and found out that in the case of suspend, for the
CIK/Hawaii GPUs, smum_is_dpm_running(hwmgr) returns false, while in the case of
hibernate, smum_is_dpm_running(hwmgr) returns true.
For CIK, the ci_is_dpm_running() function calls the ci_is_smc_ram_running() function,
which is ultimately used to determine if DPM is currently enabled or not,
and this seems to provide the wrong answer.
I've changed the ci_is_dpm_running() function to instead use the same method that
some other AMD GPU chips do (e.g Fiji), which seems to read the voltage controller.
I've tested on my R9 390 and it seems to work correctly for both suspend and
hibernate use cases, and has been stable so far.
Evan Quan [Wed, 5 Aug 2020 09:24:41 +0000 (17:24 +0800)]
drm/amd/powerplay: put VCN/JPEG into PG ungate state before dpm table setup(V3)
As VCN related dpm table setup needs VCN be in PG ungate state. Same logics
applies to JPEG.
V2: fix paste typo
V3: code cosmetic
Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Matt Coffin <mcoffin13@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add lock protections and avoid unnecessary actions
if the PG state is already the same as required.
Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Matt Coffin <mcoffin13@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 30 Jul 2020 19:21:33 +0000 (15:21 -0400)]
drm/amdgpu/smu: rework i2c adpater registration
The i2c init/fini functions just register the i2c adapter.
There is no need to call them during hw init/fini. They only
need to be called once per driver init/fini. The previous
behavior broke runtime pm because we unregistered the i2c
adapter during suspend.
Tested-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Igor Kravchenko [Fri, 24 Jul 2020 15:10:40 +0000 (11:10 -0400)]
drm/amd/display: Display goes blank after inst
[why]
Display goes blank after driver installation.
Aux tuning parameters must be used for 2.x only.
Wrong dc_golden_table offset was used.
[How]
Implement a new enc3_hw_init function without VBIOS constants usage to
be called for 3.x
Calculate dc_golden_table offset using sum of
base dce_info offset and golden table offset
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 17 Jul 2020 17:19:27 +0000 (13:19 -0400)]
drm/amd/display: Change null plane state swizzle mode to 4kb_s
[Why]
During SetPathMode and UpdatePlanes, the plane state can be null. We default
to linear swizzle mode when plane state is null. This resulted in bandwidth
validation failing when trying to set 8K60 mode (which previously passed validation
during rebuild timing list).
[How]
Change the default swizzle mode from linear to 4kb_s and update pitch accordingly.
Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 30 Jun 2020 15:16:05 +0000 (11:16 -0400)]
drm/amd/display: Fix logger context
[Why&How]
use correct logger context
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Mon, 20 Jul 2020 23:18:43 +0000 (19:18 -0400)]
drm/amd/display: Use parameter for call to set output mux
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Liu ChengZhe [Fri, 24 Jul 2020 07:55:33 +0000 (15:55 +0800)]
drm amdgpu: Skip tmr load for SRIOV
1. For Navi12, CHIP_SIENNA_CICHLID, skip tmr load operation;
2. Check pointer before release firmware.
v2: use CHIP_SIENNA_CICHLID instead
v3: remove local "bool ret"; fix grammer issue
v4: use my name instead of "root"
v5: fix grammer issue and indent issue
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: dchubbub p-state warning during surface planes switch
[Why]
ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk
according to bandwidth requirement. call stack: rv1_update_clocks -->
update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth
--> prepare_bandwidth / optimize_bandwidth. before change dcn hw,
prepare_bandwidth will be called first to allow enough clock,
watermark for change, after end of dcn hw change, optimize_bandwidth
is executed to lower clock to save power for new dcn hw settings.
below is sequence of commit_planes_for_stream:
step 1: prepare_bandwidth - raise clock to have enough bandwidth
step 2: lock_doublebuffer_enable
step 3: pipe_control_lock(true) - make dchubp register change will
not take effect right way
step 4: apply_ctx_for_surface - program dchubp
step 5: pipe_control_lock(false) - dchubp register change take effect
step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream
for full_date, optimize clock to save power
at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be
changed for new dchubp configuration. but real dcn hub dchubps are
still running with old configuration until end of step 5. this need
clocks settings at step 1 should not less than that before step 1.
this is checked by two conditions: 1. if (should_set_clock(safe_to_lower
, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) ||
new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz)
2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz
the second condition is based on new dchubp configuration. dppclk
for new dchubp may be different from dppclk before step 1.
for example, before step 1, dchubps are as below:
pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979)
pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080)
for dppclk for pipe0 need dppclk = dispclk
new dchubp pipe split configuration:
pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080)
pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080)
dppclk only needs dppclk = dispclk /2.
dispclk, dppclk are not lock by otg master lock. they take effect
after step 1. during this transition, dispclk are the same, but
dppclk is changed to half of previous clock for old dchubp
configuration between step 1 and step 6. This may cause p-state
warning intermittently.
[How]
for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we
need make sure dppclk are not changed to less between step 1 and 6.
for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz,
new display clock is raised, but we do not know ratio of
new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz,
new_clocks->dispclk_khz /2 does not guarantee equal or higher than
old dppclk. we could ignore power saving different between
dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6.
as long as safe_to_lower = false, set dpclk = dispclk to simplify
condition check.
Jun Lei [Thu, 25 Jun 2020 17:24:12 +0000 (13:24 -0400)]
drm/amd/display: Disable idle optimizations before programming DCN
[Why]
Programming DCN is explicitly forbidden during idle optimzations allowed
state. Existing implemenation relies on OS/DM, which is not robust. Instead
DC should sequence this.
Note that DC will not re-enter idle optimized state on its own, it is only
responsible for catching out of sequence calls. It is still DM
responsibility to sequence appropriate for optimized power, but this change
removes the requirement for DM to cover the .1% case.
[How]
- elevate updates during idle optimized state to full updates
- disable idle power optimizations prior to programming
Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Tsai [Wed, 15 Jul 2020 03:21:43 +0000 (11:21 +0800)]
drm/amd/display: Check lane status again after link training done
[Why]
Some monitors could suffer symbol unlock but cannot send HPD IRQ to
notic source device to handle link loss. This makes monitor stuck in
abnormal status and causes black screen.
[How]
According to the suggestion from scalar vendor, to check lane status
again after link training done. That can improve the comaptibility
from current production monitors.
Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 14 Jul 2020 19:06:40 +0000 (15:06 -0400)]
drm/amd/display: Don't compare dppclk before updating DTO
[Why]
In dcn3_update_clocks there are situations where dppclk is not
lowered (i.e. stays the same), but DTO still needs to be increased
before we program pipe frontend (i.e. in prepare_bandwidth). If we
don't program the new DTO value before we program the pipe,
we will underflow as soon as the pipe lock is released until the
next call to dcn3_update_clocks where the DTO is updated.
[How]
Remove dppclk check before programming new DTO value.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eryk Brol [Tue, 16 Jun 2020 20:29:19 +0000 (16:29 -0400)]
drm/amd/display: Fix naming of DSC Debugfs entry
[why]
Fix naming and return bits rather than bytes per pixel for
naming consistency. Because registers return Bytes per pixel,
but DSC Config structure is expecting bits per pixel as input.
So when returning the value convert from bytes into bits.
Eryk Brol [Tue, 16 Jun 2020 20:24:11 +0000 (16:24 -0400)]
drm/amd/display: Rename bytes_pp to the correct bits_pp
[Why]
Struct dcn_dsc_state is used for reading current state
and parameters of DSC on a pipe, the target rate parameter
uses bytes per pixel even though its reading BITS_PER_PIXEL
register.
[How]
Changing it to Bits Per Pixel for consistency.
Kevin Wang [Mon, 27 Jul 2020 01:08:22 +0000 (09:08 +0800)]
drm/amd/swsmu: allow asic to handle sensor type by itself
1. allow asic to handle sensor type by itself.
2. if not, use smu common sensor to handle it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Mon, 27 Jul 2020 13:39:40 +0000 (16:39 +0300)]
drm/amd/powerplay: off by one bugs in smu_cmn_to_asic_specific_index()
These tables have _COUNT number of elements so the comparisons should be
>= instead of > to prevent reading one element beyond the end of the
array.
Fixes: 8264ee69f0d8 ("drm/amd/powerplay: drop unused code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/powerplay: drop unnecessary message support check(v2)
Take back patch:drop unnecessary message support check
Because the gpu reset fail problem on renoir can be fixed by:
drm/amd/powerplay: skip invalid msg when smu set mp1 state
It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear
code layer.
Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/powerplay: skip invalid msg when smu set mp1 state
Some asic may not support for some message of set mp1 state.
If the return value of smu_send_smc_msg is -EINVAL, that means it failed
to send msg to smc as it can not map an valid message for the ASIC. And
with that case, smu_set_mp1_state should be skipped as those ASIC was in
fact do not support for that.
Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/powerplay: remove the dpm checking in the boot sequence
It's not necessary to retrieve the power features status when the
asic is booted up the first time. This patch can have the features
enablement status still checked in suspend/resume case and removed
from the first boot up sequence.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / kernel.git / log