Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two small fixes
- Initialize a spinlock in the stm32 reset code
- Add dt bindings to the clk maintainer filepattern"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
MAINTAINERS: add include/dt-bindings/clock to COMMON CLK FRAMEWORK
clk: stm32: rcc_reset: Fix missing spin_lock_init()
Merge tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Bit quieter this week, the main thing is it pulls in the fixes for the
sysfb resource issue you were seeing. these had been queued for next
so should have had some decent testing.
Otherwise amdgpu, i915 and msm each have a few fixes, and vc4 has one.
fbdev:
- sysfb fixes/conflicting fb fixes
amdgpu:
- GPU recovery fix
- Fix integer type usage in fourcc header for AMD modifiers
- Fix setting cache_dirty for dma-buf objects on discrete
msm:
- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so
that userspace sees the value *after* it is incremented if waiting
for vblank events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash
in probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check
in dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in
submit ioctl
vc4:
- NULL ptr dereference fix"
* tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"
drm/amdgpu: To flush tlb for MMHUB of RAVEN series
drm/fourcc: fix integer type usage in uapi header
drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()
fbdev: Disable sysfb device registration when removing conflicting FBs
firmware: sysfb: Add sysfb_disable() helper function
firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
drm/msm/gem: Fix error return on fence id alloc fail
drm/i915: tweak the ordering in cpu_write_needs_clflush
drm/i915/dgfx: Disable d3cold at gfx root port
drm/i915/gem: add missing else
drm/vc4: perfmon: Fix variable dereferenced before check
drm/msm/dpu: Fix variable dereferenced before check
drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()
drm/msm/dpu: Increment vsync_cnt before waking up userspace
Amir Goldstein [Thu, 30 Jun 2022 19:58:49 +0000 (22:58 +0300)]
vfs: fix copy_file_range() regression in cross-fs copies
A regression has been reported by Nicolas Boichat, found while using the
copy_file_range syscall to copy a tracefs file.
Before commit 6c5c6aabe260 ("vfs: allow copy_file_range to copy across
devices") the kernel would return -EXDEV to userspace when trying to
copy a file across different filesystems. After this commit, the
syscall doesn't fail anymore and instead returns zero (zero bytes
copied), as this file's content is generated on-the-fly and thus reports
a size of zero.
Another regression has been reported by He Zhe - the assertion of
WARN_ON_ONCE(ret == -EOPNOTSUPP) can be triggered from userspace when
copying from a sysfs file whose read operation may return -EOPNOTSUPP.
Since we do not have test coverage for copy_file_range() between any two
types of filesystems, the best way to avoid these sort of issues in the
future is for the kernel to be more picky about filesystems that are
allowed to do copy_file_range().
This patch restores some cross-filesystem copy restrictions that existed
prior to commit 6c5c6aabe260 ("vfs: allow copy_file_range to copy across
devices"), namely, cross-sb copy is not allowed for filesystems that do
not implement ->copy_file_range().
Filesystems that do implement ->copy_file_range() have full control of
the result - if this method returns an error, the error is returned to
the user. Before this change this was only true for fs that did not
implement the ->remap_file_range() operation (i.e. nfsv3).
Filesystems that do not implement ->copy_file_range() still fall-back to
the generic_copy_file_range() implementation when the copy is within the
same sb. This helps the kernel can maintain a more consistent story
about which filesystems support copy_file_range().
nfsd and ksmbd servers are modified to fall-back to the
generic_copy_file_range() implementation in case vfs_copy_file_range()
fails with -EOPNOTSUPP or -EXDEV, which preserves behavior of
server-side-copy.
fall-back to generic_copy_file_range() is not implemented for the smb
operation FSCTL_DUPLICATE_EXTENTS_TO_FILE, which is arguably a correct
change of behavior.
Vladimir Oltean [Wed, 29 Jun 2022 18:30:07 +0000 (21:30 +0300)]
net: dsa: felix: fix race between reading PSFP stats and port stats
Both PSFP stats and the port stats read by ocelot_check_stats_work() are
indirectly read through the same mechanism - write to STAT_CFG:STAT_VIEW,
read from SYS:STAT:CNT[n].
It's just that for port stats, we write STAT_VIEW with the index of the
port, and for PSFP stats, we write STAT_VIEW with the filter index.
So if we allow them to run concurrently, ocelot_check_stats_work() may
change the view from vsc9959_psfp_counters_get(), and vice versa.
Jakub Kicinski [Wed, 29 Jun 2022 18:19:10 +0000 (11:19 -0700)]
net: tun: avoid disabling NAPI twice
Eric reports that syzbot made short work out of my speculative
fix. Indeed when queue gets detached its tfile->tun remains,
so we would try to stop NAPI twice with a detach(), close()
sequence.
Alternative fix would be to move tun_napi_disable() to
tun_detach_all() and let the NAPI run after the queue
has been detached.
Fixes: 6760cd5a7546 ("net: tun: stop NAPI when detaching queues") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220629181911.372047-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 30 Jun 2022 17:03:22 +0000 (10:03 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Three minor bug fixes:
- qedr not setting the QP timeout properly toward userspace
- Memory leak on error path in ib_cm
- Divide by 0 in RDMA interrupt moderation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
linux/dim: Fix divide by 0 in RDMA DIM
RDMA/cm: Fix memory leak in ib_cm_insert_listen
RDMA/qedr: Fix reporting QP timeout attribute
Linus Torvalds [Thu, 30 Jun 2022 16:57:18 +0000 (09:57 -0700)]
Merge tag 'fsnotify_for_v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fanotify fix from Jan Kara:
"A fix for recently added fanotify API to have stricter checks and
refuse some invalid flag combinations to make our life easier in the
future"
* tag 'fsnotify_for_v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: refine the validation checks on non-dir inode mask
Linus Torvalds [Thu, 30 Jun 2022 16:45:42 +0000 (09:45 -0700)]
Merge tag 'v5.19-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression that breaks the ccp driver"
* tag 'v5.19-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Fix device IRQ counting by using platform_irq_count()
Petr Machata [Wed, 29 Jun 2022 07:02:05 +0000 (10:02 +0300)]
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
In mlxsw_sp_nexthop6_init(), a next hop is always added to the router
linked list, and mlxsw_sp_nexthop_type_init() is invoked afterwards. When
that function results in an error, the next hop will not have been removed
from the linked list. As the error is propagated upwards and the caller
frees the next hop object, the linked list ends up holding an invalid
object.
A similar issue comes up with mlxsw_sp_nexthop4_init(), where rollback
block does exist, however does not include the linked list removal.
Both IPv6 and IPv4 next hops have a similar issue with next-hop counter
rollbacks. As these were introduced in the same patchset as the next hop
linked list, include the cleanup in this patch.
Fixes: 4e4a8cbe8a97 ("mlxsw: spectrum_router: Keep nexthops in a linked list") Fixes: 57b8fd70b9c8 ("mlxsw: spectrum: Add support for setting counters on nexthops") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220629070205.803952-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Duoming Zhou [Wed, 29 Jun 2022 00:26:40 +0000 (08:26 +0800)]
net: rose: fix UAF bugs caused by timer handler
There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry()
and rose_idletimer_expiry(). The root cause is that del_timer()
could not stop the timer handler that is running and the refcount
of sock is not managed properly.
This patch adds refcount of sock when we use functions
such as rose_start_heartbeat() and so on to start timer,
and decreases the refcount of sock when timer is finished
or deleted by functions such as rose_stop_heartbeat()
and so on. As a result, the UAF bugs could be mitigated.
Jose Alonso [Tue, 28 Jun 2022 15:13:02 +0000 (12:13 -0300)]
net: usb: ax88179_178a: Fix packet receiving
This patch corrects packet receiving in ax88179_rx_fixup.
- problem observed:
ifconfig shows allways a lot of 'RX Errors' while packets
are received normally.
This occurs because ax88179_rx_fixup does not recognise properly
the usb urb received.
The packets are normally processed and at the end, the code exits
with 'return 0', generating RX Errors.
(pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify
another packet there)
The dump shows that pkt_cnt is the number of entrys in the
per-packet metadata. It is "2 * packet count".
Each packet have two entrys. The first have a valid
value (pkt_len and AX_RXHDR_*) and the second have a
dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR).
Why exists dummy-header for each packet?!?
My guess is that this was done probably to align the
entry for each packet to 64-bits and maintain compatibility
with old firmware.
There is also a padding (0x00000000) before the rx_hdr to
align the end of rx_hdr to 64-bit.
Note that packets have a alignment of 64-bits (8-bytes).
This patch assumes that the dummy-header and the last
padding are optional. So it preserves semantics and
recognises the same valid packets as the current code.
This patch was made using only the dumpfile information and
tested with only one device:
0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Fixes: 49d60052a7fe ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup") Fixes: ce13f848757a ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Alonso <joalonsof@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yevhen Orlov [Wed, 29 Jun 2022 01:29:14 +0000 (04:29 +0300)]
net: bonding: fix use-after-free after 802.3ad slave unbind
commit badbe055b92f ("bonding: fix 802.3ad aggregator reselection"),
resolve case, when there is several aggregation groups in the same bond.
bond_3ad_unbind_slave will invalidate (clear) aggregator when
__agg_active_ports return zero. So, ad_clear_agg can be executed even, when
num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for,
previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave
will not update slave ports list, because lag_ports==NULL. So, here we
got slave ports, pointing to freed aggregator memory.
Fix with checking actual number of ports in group (as was before
commit badbe055b92f ("bonding: fix 802.3ad aggregator reselection") ),
before ad_clear_agg().
Oleksij Rempel [Tue, 28 Jun 2022 11:43:49 +0000 (13:43 +0200)]
net: phy: ax88772a: fix lost pause advertisement configuration
In case of asix_ax88772a_link_change_notify() workaround, we run soft
reset which will automatically clear MII_ADVERTISE configuration. The
PHYlib framework do not know about changed configuration state of the
PHY, so we need use phy_init_hw() to reinit PHY configuration.
Fixes: 877cfd219ba7 ("net: usb/phy: asix: add support for ax88772A/C PHYs") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220628114349.3929928-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Wunner [Tue, 28 Jun 2022 10:15:08 +0000 (12:15 +0200)]
net: phy: Don't trigger state machine while in suspend
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(),
but subsequent interrupts may retrigger it:
They may have been left enabled to facilitate wakeup and are not
quiesced until the ->suspend_noirq() phase. Unwanted interrupts may
hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(),
as well as between dpm_resume_noirq() and mdio_bus_phy_resume().
Retriggering the phy_state_machine() through an interrupt is not only
undesirable for the reason given in mdio_bus_phy_suspend() (freezing it
midway with phydev->lock held), but also because the PHY may be
inaccessible after it's suspended: Accesses to USB-attached PHYs are
blocked once usb_suspend_both() clears the can_submit flag and PHYs on
PCI network cards may become inaccessible upon suspend as well.
Amend phy_interrupt() to avoid triggering the state machine if the PHY
is suspended. Signal wakeup instead if the attached net_device or its
parent has been configured as a wakeup source. (Those conditions are
identical to mdio_bus_phy_may_suspend().) Postpone handling of the
interrupt until the PHY has resumed.
Before stopping the phy_state_machine() in mdio_bus_phy_suspend(),
wait for a concurrent phy_interrupt() to run to completion. That is
necessary because phy_interrupt() may have checked the PHY's suspend
status before the system sleep transition commenced and it may thus
retrigger the state machine after it was stopped.
Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(),
wait for a concurrent phy_interrupt() to complete to ensure that
interrupts which it postponed are properly rerun.
The issue was exposed by commit 3e5d3f0549b3 ("usbnet: smsc95xx: Forward
PHY interrupts to PHY driver to avoid polling"), but has existed since
forever.
Oliver Neukum [Tue, 28 Jun 2022 09:35:17 +0000 (11:35 +0200)]
usbnet: fix memory allocation in helpers
usbnet provides some helper functions that are also used in
the context of reset() operations. During a reset the other
drivers on a device are unable to operate. As that can be block
drivers, a driver for another interface cannot use paging
in its memory allocations without risking a deadlock.
Use GFP_NOIO in the helpers.
Coleman Dietsch [Tue, 28 Jun 2022 17:47:44 +0000 (12:47 -0500)]
selftests net: fix kselftest net fatal error
The incorrect path is causing the following error when trying to run net
kselftests:
In file included from bpf/nat6to4.c:43:
../../../lib/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
^~~~~~~~~~~~~~~~~~~
1 error generated.
1) Restore set counter when one of the CPU loses race to add elements
to sets.
2) After NF_STOLEN, skb might be there no more, update nftables trace
infra to avoid access to skb in this case. From Florian Westphal.
3) nftables bridge might register a prerouting hook with zero priority,
br_netfilter incorrectly skips it. Also from Florian.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: br_netfilter: do not skip all hooks with 0 priority
netfilter: nf_tables: avoid skb access on nf_stolen
netfilter: nft_dynset: restore set element counter when failing to update
====================
Ruili Ji [Wed, 22 Jun 2022 06:20:22 +0000 (14:20 +0800)]
drm/amdgpu: To flush tlb for MMHUB of RAVEN series
amdgpu: [mmhub0] no-retry page fault (src_id:0 ring:40 vmid:8 pasid:32769, for process test_basic pid 3305 thread test_basic pid 3305)
amdgpu: in page starting at address 0x00007ff990003000 from IH client 0x12 (VMC)
amdgpu: VM_L2_PROTECTION_FAULT_STATUS:0x00840051
amdgpu: Faulty UTCL2 client ID: MP1 (0x0)
amdgpu: MORE_FAULTS: 0x1
amdgpu: WALKER_ERROR: 0x0
amdgpu: PERMISSION_FAULTS: 0x5
amdgpu: MAPPING_ERROR: 0x0
amdgpu: RW: 0x1
When memory is allocated by kfd, no one triggers the tlb flush for MMHUB0.
There is page fault from MMHUB0.
v2:fix indentation
v3:change subject and fix indentation
Signed-off-by: Ruili Ji <ruiliji2@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Carlos Llamas [Tue, 21 Jun 2022 20:39:21 +0000 (20:39 +0000)]
drm/fourcc: fix integer type usage in uapi header
Kernel uapi headers are supposed to use __[us]{8,16,32,64} types defined
by <linux/types.h> as opposed to 'uint32_t' and similar. See [1] for the
relevant discussion about this topic. In this particular case, the usage
of 'uint64_t' escaped headers_check as these macros are not being called
here. However, the following program triggers a compilation error:
#include <drm/drm_fourcc.h>
int main()
{
unsigned long x = AMD_FMT_MOD_CLEAR(RB);
return 0;
}
gcc error:
drm.c:5:27: error: ‘uint64_t’ undeclared (first use in this function)
5 | unsigned long x = AMD_FMT_MOD_CLEAR(RB);
| ^~~~~~~~~~~~~~~~~
This patch changes AMD_FMT_MOD_{SET,CLEAR} macros to use the correct
integer types, which fixes the above issue.
[1] https://lkml.org/lkml/2019/6/5/18
Fixes: 12f6834d9e40 ("drm/fourcc: Add AMD DRM modifiers.") Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Wed, 29 Jun 2022 16:20:40 +0000 (09:20 -0700)]
Merge tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- seek null check (don't use f_seek op directly and blindly)
- offset validation in FSCTL_SET_ZERO_DATA
- fallocate fix (relates e.g. to xfstests generic/091 and 263)
- two cleanup fixes
- fix socket settings on some arch
* tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use vfs_llseek instead of dereferencing NULL
ksmbd: check invalid FileOffset and BeyondFinalZero in FSCTL_ZERO_DATA
ksmbd: set the range of bytes to zero without extending file size in FSCTL_ZERO_DATA
ksmbd: remove duplicate flag set in smb2_write
ksmbd: smbd: Remove useless license text when SPDX-License-Identifier is already used
ksmbd: use SOCK_NONBLOCK type for kernel_accept()
Michael Walle [Mon, 27 Jun 2022 17:06:43 +0000 (19:06 +0200)]
NFC: nxp-nci: don't print header length mismatch on i2c error
Don't print a misleading header length mismatch error if the i2c call
returns an error. Instead just return the error code without any error
message.
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Mon, 27 Jun 2022 17:06:42 +0000 (19:06 +0200)]
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
There are packets which doesn't have a payload. In that case, the second
i2c_master_read() will have a zero length. But because the NFC
controller doesn't have any data left, it will NACK the I2C read and
-ENXIO will be returned. In case there is no payload, just skip the
second i2c master read.
Fixes: 276f3e999832 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangyu Hua [Wed, 29 Jun 2022 06:34:18 +0000 (14:34 +0800)]
net: tipc: fix possible refcount leak in tipc_sk_create()
Free sk in case tipc_sk_insert() fails.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
fbdev: Disable sysfb device registration when removing conflicting FBs
The platform devices registered by sysfb match with firmware-based DRM or
fbdev drivers, that are used to have early graphics using a framebuffer
provided by the system firmware.
DRM or fbdev drivers later are probed and remove conflicting framebuffers,
leading to these platform devices for generic drivers to be unregistered.
But the current solution has a race, since the sysfb_init() function could
be called after a DRM or fbdev driver is probed and request to unregister
the devices for drivers with conflicting framebuffes.
To prevent this, disable any future sysfb platform device registration by
calling sysfb_disable(), if a driver requests to remove the conflicting
framebuffers.
As of commit 05b72c41710b ("net: ipv6: unexport __init-annotated seg6_hmac_init()"),
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
This remove the EXPORT_SYMBOL to fix modpost warning:
WARNING: modpost: vmlinux.o(___ksymtab+seg6_hmac_net_init+0x0): Section mismatch in reference from the variable __ksymtab_seg6_hmac_net_init to the function .init.text:seg6_hmac_net_init()
The symbol seg6_hmac_net_init is exported and annotated __init
Fix this by removing the __init annotation of seg6_hmac_net_init or drop the export.
Fixes: 72caafc2ee5b ("ipv6: sr: add core files for SR HMAC support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220628033134.21088-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dave Airlie [Wed, 29 Jun 2022 04:16:46 +0000 (14:16 +1000)]
Merge tag 'drm-msm-fixes-2022-06-28' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v5.19-rc5
- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so that
userspace sees the value *after* it is incremented if waiting for vblank
events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash in
probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check in
dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in submit
ioctl
Jakub Kicinski [Wed, 29 Jun 2022 03:45:46 +0000 (20:45 -0700)]
Merge branch 'mptcp-fixes-for-5-19'
Mat Martineau says:
====================
mptcp: Fixes for 5.19
Several categories of fixes from the mptcp tree:
Patches 1-3 are fixes related to MP_FAIL and FASTCLOSE, to make sure
MIBs are accurate, and to handle MP_FAIL transmission and responses at
the correct times. sk_timer conflicts are also resolved.
Patches 4 and 6 handle two separate race conditions, one at socket
shutdown and one with unaccepted subflows.
Patch 5 makes sure read operations are not blocked during fallback to
TCP.
Patch 7 improves the diag selftest, which were incorrectly failing on
slow machines (like the VMs used for CI testing).
Patch 8 avoids possible symbol redefinition errors in the userspace
mptcp.h file.
Patch 9 fixes a selftest build issue with gcc 12.
====================
Mat Martineau [Tue, 28 Jun 2022 01:02:43 +0000 (18:02 -0700)]
selftests: mptcp: Initialize variables to quiet gcc 12 warnings
In a few MPTCP selftest tools, gcc 12 complains that the 'sock' variable
might be used uninitialized. This is a false positive because the only
code path that could lead to uninitialized access is where getaddrinfo()
fails, but the local xgetaddrinfo() wrapper exits if such a failure
occurs.
Initialize the 'sock' variable anyway to allow the tools to build with
gcc 12.
Fixes: 40e38737120b ("mptcp: add basic kselftest for mptcp") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ossama Othman [Tue, 28 Jun 2022 01:02:42 +0000 (18:02 -0700)]
mptcp: fix conflict with <netinet/in.h>
Including <linux/mptcp.h> before the C library <netinet/in.h> header
causes symbol redefinition errors at compile-time due to duplicate
declarations and definitions in the <linux/in.h> header included by
<linux/mptcp.h>.
Explicitly include <netinet/in.h> before <linux/in.h> in
<linux/mptcp.h> when __KERNEL__ is not defined so that the C library
compatibility logic in <linux/libc-compat.h> is enabled when including
<linux/mptcp.h> in user space code.
Fixes: 1af943d9080b ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support") Signed-off-by: Ossama Othman <ossama.othman@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:41 +0000 (18:02 -0700)]
selftests: mptcp: more stable diag tests
The mentioned test-case still use an hard-coded-len sleep to
wait for a relative large number of connection to be established.
On very slow VM and with debug build such timeout could be exceeded,
causing failures in our CI.
Address the issue polling for the expected condition several times,
up to an unreasonable high amount of time. On reasonably fast system
the self-tests will be faster then before, on very slow one we will
still catch the correct condition.
Fixes: 6aaaa43642d2 ("selftests/mptcp: add diag interface tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:40 +0000 (18:02 -0700)]
mptcp: fix race on unaccepted mptcp sockets
When the listener socket owning the relevant request is closed,
it frees the unaccepted subflows and that causes later deletion
of the paired MPTCP sockets.
The mptcp socket's worker can run in the time interval between such delete
operations. When that happens, any access to msk->first will cause an UaF
access, as the subflow cleanup did not cleared such field in the mptcp
socket.
Address the issue explicitly traversing the listener socket accept
queue at close time and performing the needed cleanup on the pending
msk.
Note that the locking is a bit tricky, as we need to acquire the msk
socket lock, while still owning the subflow socket one.
Fixes: 2f59c7ad3fa3 ("mptcp: keep track of local endpoint still available for each msk") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:39 +0000 (18:02 -0700)]
mptcp: consistent map handling on failure
When the MPTCP receive path reach a non fatal fall-back condition, e.g.
when the MPC sockets must fall-back to TCP, the existing code is a little
self-inconsistent: it reports that new data is available - return true -
but sets the MPC flag to the opposite value.
As the consequence read operations in some exceptional scenario may block
unexpectedly.
Address the issue setting the correct MPC read status. Additionally avoid
some code duplication in the fatal fall-back scenario.
Fixes: 0ab3466cc681 ("mptcp: add MP_FAIL response support") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Tue, 28 Jun 2022 01:02:37 +0000 (18:02 -0700)]
mptcp: invoke MP_FAIL response when needed
mptcp_mp_fail_no_response shouldn't be invoked on each worker run, it
should be invoked only when MP_FAIL response timeout occurs.
This patch refactors the MP_FAIL response logic.
It leverages the fact that only the MPC/first subflow can gracefully
fail to avoid unneeded subflows traversal: the failing subflow can
be only msk->first.
A new 'fail_tout' field is added to the subflow context to record the
MP_FAIL response timeout and use such field to reliably share the
timeout timer between the MP_FAIL event and the MPTCP socket close
timeout.
Finally, a new ack is generated to send out MP_FAIL notification as soon
as we hit the relevant condition, instead of waiting a possibly unbound
time for the next data packet.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/281 Fixes: 19c72dc591ef ("mptcp: Do not traverse the subflow connection list without lock") Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:36 +0000 (18:02 -0700)]
mptcp: introduce MAPPING_BAD_CSUM
This allow moving a couple of conditional out of the fast path,
making the code more easy to follow and will simplify the next
patch.
Fixes: 827e299cd0d4 ("mptcp: Do TCP fallback on early DSS checksum failure") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:35 +0000 (18:02 -0700)]
mptcp: fix error mibs accounting
The current accounting for MP_FAIL and FASTCLOSE is not very
accurate: both can be increased even when the related option is
not really sent. Move the accounting into the correct place.
Fixes: 02c4b1579124 ("mptcp: add the mibs for MP_FAIL") Fixes: e915bf62773a ("mptcp: add the mibs for MP_FASTCLOSE") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark Pearson [Mon, 27 Jun 2022 18:14:49 +0000 (14:14 -0400)]
platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms
PSC platform profile mode is only supported on Linux for AMD platforms.
Some older Intel platforms (e.g T490) are advertising it's capability
as Windows uses it - but on Linux we should only be using MMC profile
for Intel systems.
Add a check to prevent it being enabled incorrectly.
Mark Pearson [Fri, 3 Jun 2022 17:02:09 +0000 (13:02 -0400)]
platform/x86: thinkpad-acpi: profile capabilities as integer
Currently the active mode (PSC/MMC) is stored in an enum and queried
throughout the driver.
Other driver changes will enumerate additional submodes that are relevant
to be tracked, so instead track PSC/MMC in a single integer variable.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20220603170212.164963-1-markpearson@lenovo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 24 Jun 2022 11:23:39 +0000 (13:23 +0200)]
platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute keypresses
On some Panasonic models the volume up/down/mute keypresses get
reported both through the Panasonic ACPI HKEY interface as well as
through the atkbd device.
Filter out the atkbd scan-codes for these to avoid reporting presses
twice.
Note normally we would leave the filtering of these to userspace by mapping
the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb.
However in this case that would cause regressions since we were filtering
the Panasonic ACPI HKEY events before, so filter these in the kernel.
Fixes: 4ae3aac6548a ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-7-hdegoede@redhat.com
The brightness key-presses might also get reported by the ACPI video bus,
check for this and in this case don't report the presses to avoid reporting
2 presses for a single key-press.
Fixes: 4ae3aac6548a ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-6-hdegoede@redhat.com
In hindsight blindly throwing away most of the key-press events is not
a good idea. So revert commit 4ae3aac6548a ("platform/x86:
panasonic-laptop: Resolve hotkey double trigger bug").
Fixes: 4ae3aac6548a ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-5-hdegoede@redhat.com
In the definition of panasonic_keymap[] the key codes are given in
decimal, later checks are done with hexadecimal values, which does
not help in understanding the code.
Additionally use two helper variables to shorten the code and make
the logic more obvious.
Fixes: 4ae3aac6548a ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-3-hdegoede@redhat.com
Hans de Goede [Fri, 24 Jun 2022 11:23:34 +0000 (13:23 +0200)]
ACPI: video: Change how we determine if brightness key-presses are handled
Some systems have an ACPI video bus but not ACPI video devices with
backlight capability. On these devices brightness key-presses are
(logically) not reported through the ACPI video bus.
Change how acpi_video_handles_brightness_key_presses() determines if
brightness key-presses are handled by the ACPI video driver to avoid
vendor specific drivers/platform/x86 drivers filtering out their
brightness key-presses even though they are the only ones reporting
these presses.
Fixes: 4ae3aac6548a ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-2-hdegoede@redhat.com
Amir Goldstein [Mon, 27 Jun 2022 17:47:19 +0000 (20:47 +0300)]
fanotify: refine the validation checks on non-dir inode mask
Commit f59fd09b8c27 ("fanotify: do not allow setting dirent events in
mask of non-dir") added restrictions about setting dirent events in the
mask of a non-dir inode mark, which does not make any sense.
For backward compatibility, these restictions were added only to new
(v5.17+) APIs.
It also does not make any sense to set the flags FAN_EVENT_ON_CHILD or
FAN_ONDIR in the mask of a non-dir inode. Add these flags to the
dir-only restriction of the new APIs as well.
Move the check of the dir-only flags for new APIs into the helper
fanotify_events_supported(), which is only called for FAN_MARK_ADD,
because there is no need to error on an attempt to remove the dir-only
flags from non-dir inode.
Nicolas Dichtel [Thu, 23 Jun 2022 12:00:15 +0000 (14:00 +0200)]
ipv6: take care of disable_policy when restoring routes
When routes corresponding to addresses are restored by
fixup_permanent_addr(), the dst_nopolicy parameter was not set.
The typical use case is a user that configures an address on a down
interface and then put this interface up.
Let's take care of this flag in addrconf_f6i_alloc(), so that every callers
benefit ont it.
CC: stable@kernel.org CC: David Forster <dforster@brocade.com> Fixes: b17168d7e2cc ("ipv6: Provide ipv6 version of "disable_policy" sysctl") Reported-by: Siwar Zitouni <siwar.zitouni@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220623120015.32640-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Fri, 24 Jun 2022 07:51:39 +0000 (09:51 +0200)]
net: usb: asix: do not force pause frames support
We should respect link partner capabilities and not force flow control
support on every link. Even more, in current state the MAC driver do not
advertises pause support so we should not keep flow control enabled at
all.
Fixes: 3ce7841abdc9 ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20220624075139.3139300-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Fri, 24 Jun 2022 07:51:38 +0000 (09:51 +0200)]
net: asix: fix "can't send until first packet is send" issue
If cable is attached after probe sequence, the usbnet framework would
not automatically start processing RX packets except at least one
packet was transmitted.
On systems with any kind of address auto configuration this issue was
not detected, because some packets are send immediately after link state
is changed to "running".
With this patch we will notify usbnet about link status change provided by the
PHYlib.
Fixes: 3ce7841abdc9 ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20220624075139.3139300-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Notify user space if any actions were flushed before error
This patch series fixes the behaviour of actions flush so that the
kernel always notifies user space whenever it deletes actions during a
flush operation, even if it didn't flush all the actions. This series
also introduces tdc tests to verify this new behaviour.
====================
Victor Nogueira [Thu, 23 Jun 2022 14:07:42 +0000 (11:07 -0300)]
selftests: tc-testing: Add testcases to test new flush behaviour
Add tdc test cases to verify new flush behaviour is correct, which do
the following:
- Try to flush only one action which is being referenced by a filter
- Try to flush three actions where the last one (index 3) is being
referenced by a filter
Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Victor Nogueira [Thu, 23 Jun 2022 14:07:41 +0000 (11:07 -0300)]
net/sched: act_api: Notify user space if any actions were flushed before error
If during an action flush operation one of the actions is still being
referenced, the flush operation is aborted and the kernel returns to
user space with an error. However, if the kernel was able to flush, for
example, 3 actions and failed on the fourth, the kernel will not notify
user space that it deleted 3 actions before failing.
This patch fixes that behaviour by notifying user space of how many
actions were deleted before flush failed and by setting extack with a
message describing what happened.
Fixes: 9ae3b9c21c89 ("net_sched: act: refuse to remove bound action outside") Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tong Zhang [Mon, 27 Jun 2022 04:33:48 +0000 (21:33 -0700)]
epic100: fix use after free on rmmod
epic_close() calls epic_rx() and uses dma buffer, but in epic_remove_one()
we already freed the dma buffer. To fix this issue, reorder function calls
like in the .probe function.
Jakub Kicinski [Thu, 23 Jun 2022 04:21:05 +0000 (21:21 -0700)]
net: tun: stop NAPI when detaching queues
While looking at a syzbot report I noticed the NAPI only gets
disabled before it's deleted. I think that user can detach
the queue before destroying the device and the NAPI will never
be stopped.
Linus Torvalds [Mon, 27 Jun 2022 17:47:34 +0000 (10:47 -0700)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes all over the place, most notably we are disabling
IRQ hardening (again!)"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_ring: make vring_create_virtqueue_split prettier
vhost-vdpa: call vhost_vdpa_cleanup during the release
virtio_mmio: Restore guest page size on resume
virtio_mmio: Add missing PM calls to freeze/restore
caif_virtio: fix race between virtio_device_ready() and ndo_open()
virtio-net: fix race between ndo_open() and virtio_device_ready()
virtio: disable notification hardening by default
virtio: Remove unnecessary variable assignments
virtio_ring : keep used_wrap_counter in vq->last_used_idx
vduse: Tie vduse mgmtdev and its device
vdpa/mlx5: Initialize CVQ vringh only once
vdpa/mlx5: Update Control VQ callback information
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it had been broken for a decade.
Commit 0a8703aa4baf ("modpost: fix section mismatch check for exported
init/exit sections") fixed it so modpost started to warn it again, then
this showed up:
MODPOST vmlinux.symvers
WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup()
The symbol tick_nohz_full_setup is exported and annotated __init
Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export.
Drop the export because tick_nohz_full_setup() is only called from the
built-in code in kernel/sched/isolation.c.
Fixes: 80ec8f50d176 ("time: Export tick start/stop functions for rcutorture") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Westphal [Tue, 21 Jun 2022 16:26:03 +0000 (18:26 +0200)]
netfilter: br_netfilter: do not skip all hooks with 0 priority
When br_netfilter module is loaded, skbs may be diverted to the
ipv4/ipv6 hooks, just like as if we were routing.
Unfortunately, bridge filter hooks with priority 0 may be skipped
in this case.
Example:
1. an nftables bridge ruleset is loaded, with a prerouting
hook that has priority 0.
2. interface is added to the bridge.
3. no tcp packet is ever seen by the bridge prerouting hook.
4. flush the ruleset
5. load the bridge ruleset again.
6. tcp packets are processed as expected.
After 1) the only registered hook is the bridge prerouting hook, but its
not called yet because the bridge hasn't been brought up yet.
After 2), hook order is:
0 br_nf_pre_routing // br_netfilter internal hook
0 chain bridge f prerouting // nftables bridge ruleset
The packet is diverted to br_nf_pre_routing.
If call-iptables is off, the nftables bridge ruleset is called as expected.
But if its enabled, br_nf_hook_thresh() will skip it because it assumes
that all 0-priority hooks had been called previously in bridge context.
To avoid this, check for the br_nf_pre_routing hook itself, we need to
resume directly after it, even if this hook has a priority of 0.
Unfortunately, this still results in different packet flow.
With this fix, the eval order after in 3) is:
1. br_nf_pre_routing
2. ip(6)tables (if enabled)
3. nftables bridge
but after 5 its the much saner:
1. nftables bridge
2. br_nf_pre_routing
3. ip(6)tables (if enabled)
Unfortunately I don't see a solution here:
It would be possible to move br_nf_pre_routing to a higher priority
so that it will be called later in the pipeline, but this also impacts
ebtables evaluation order, and would still result in this very ordering
problem for all nftables-bridge hooks with the same priority as the
br_nf_pre_routing one.
Searching back through the git history I don't think this has
ever behaved in any other way, hence, no fixes-tag.
Florian Westphal [Wed, 22 Jun 2022 14:43:57 +0000 (16:43 +0200)]
netfilter: nf_tables: avoid skb access on nf_stolen
When verdict is NF_STOLEN, the skb might have been freed.
When tracing is enabled, this can result in a use-after-free:
1. access to skb->nf_trace
2. access to skb->mark
3. computation of trace id
4. dump of packet payload
To avoid 1, keep a cached copy of skb->nf_trace in the
trace state struct.
Refresh this copy whenever verdict is != STOLEN.
Avoid 2 by skipping skb->mark access if verdict is STOLEN.
3 is avoided by precomputing the trace id.
Only dump the packet when verdict is not "STOLEN".
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Matthew Auld [Wed, 22 Jun 2022 15:59:19 +0000 (16:59 +0100)]
drm/i915: tweak the ordering in cpu_write_needs_clflush
For imported dma-buf objects we leave the object as cache_coherent = 0
across all platforms, which is reasonable given that have no clue what
the memory underneath is, and its not like the driver can ever manually
clflush the pages anyway (like with i915_gem_clflush_object) for such
objects. However on discrete we choose to treat cache_dirty = true as a
programmer error, leading to a warning. The simplest fix looks to be to
just change the ordering in cpu_write_needs_clflush to prevent ever
setting cache_dirty for dma-buf objects on discrete.
Fixes: cc066f8e7327 ("drm/i915/dmabuf: Fix prime_mmap to work when using LMEM") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5266 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622155919.355081-1-matthew.auld@intel.com
(cherry picked from commit 563aaf4a928def2d36d1b3de0a4b515e2477b4da) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Anshuman Gupta [Thu, 16 Jun 2022 12:22:49 +0000 (17:52 +0530)]
drm/i915/dgfx: Disable d3cold at gfx root port
Currently i915 disables d3cold for i915 pci dev.
This blocks D3 for i915 gfx pci upstream bridge (VSP).
Let's disable d3cold at gfx root port to make sure that
i915 gfx VSP can transition to D3 to save some power.
We don't need to disable/enable d3cold in rpm, s2idle
suspend/resume handlers. Disabling/Enabling d3cold at
gfx root port in probe/remove phase is sufficient.
Hans de Goede [Mon, 27 Jun 2022 13:08:50 +0000 (15:08 +0200)]
platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
The Ideapad 5 15ITL05 uses DYTC version 4 for platform-profile
control. This has been tested successfully with the ideapad-laptop
DYTC version 5 code; Add the Ideapad 5 15ITL05 to the
ideapad_dytc_v4_allow_table[].
Maxime Ripard [Wed, 22 Jun 2022 08:02:43 +0000 (10:02 +0200)]
drm/vc4: perfmon: Fix variable dereferenced before check
Commit 432b50a847de ("drm/vc4: Warn if some v3d code is run on BCM2711")
introduced a check in vc4_perfmon_get() that dereferences a pointer before
we checked whether that pointer is valid or not.
Let's rework that function a bit to do things in the proper order.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 432b50a847de ("drm/vc4: Warn if some v3d code is run on BCM2711") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622080243.22119-1-maxime@cerno.tech
Deming Wang [Wed, 22 Jun 2022 19:23:06 +0000 (15:23 -0400)]
virtio_ring: make vring_create_virtqueue_split prettier
Add some spaces to vring_alloc_queue(make it look prettier).
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Message-Id: <20220622192306.4371-1-wangdeming@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-vdpa: call vhost_vdpa_cleanup during the release
Before commit 15b71346f456 ("vhost-vdpa: introduce asid based IOTLB")
we call vhost_vdpa_iotlb_free() during the release to clean all regions
mapped in the iotlb.
That commit removed vhost_vdpa_iotlb_free() and added vhost_vdpa_cleanup()
to do some cleanup, including deleting all mappings, but we forgot to call
it in vhost_vdpa_release().
This causes that if an application does not remove all mappings explicitly
(or it crashes), the mappings remain in the iotlb and subsequent
applications may fail if they map the same addresses.
Calling vhost_vdpa_cleanup() also fixes a memory leak since we are not
freeing `v->vdev.vqs` during the release from the same commit.
Since vhost_vdpa_cleanup() calls vhost_dev_cleanup() we can remove its
call from vhost_vdpa_release().
Fixes: 15b71346f456 ("vhost-vdpa: introduce asid based IOTLB") Cc: gautam.dawar@xilinx.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220622151407.51232-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Stephan Gerhold [Tue, 21 Jun 2022 11:06:21 +0000 (13:06 +0200)]
virtio_mmio: Restore guest page size on resume
Virtio devices might lose their state when the VMM is restarted
after a suspend to disk (hibernation) cycle. This means that the
guest page size register must be restored for the virtio_mmio legacy
interface, since otherwise the virtio queues are not functional.
This is particularly problematic for QEMU that currently still defaults
to using the legacy interface for virtio_mmio. Write the guest page
size register again in virtio_mmio_restore() to make legacy virtio_mmio
devices work correctly after hibernation.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-3-stephan.gerhold@kernkonzept.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stephan Gerhold [Tue, 21 Jun 2022 11:06:20 +0000 (13:06 +0200)]
virtio_mmio: Add missing PM calls to freeze/restore
Most virtio drivers provide freeze/restore callbacks to finish up
device usage before suspend and to reinitialize the virtio device after
resume. However, these callbacks are currently only called when using
virtio_pci. virtio_mmio does not have any PM ops defined.
This causes problems for example after suspend to disk (hibernation),
since the virtio devices might lose their state after the VMM is
restarted. Calling virtio_device_freeze()/restore() ensures that
the virtio devices are re-initialized correctly.
Fix this by implementing the dev_pm_ops for virtio_mmio,
similar to virtio_pci_common.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-2-stephan.gerhold@kernkonzept.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Mon, 20 Jun 2022 05:11:14 +0000 (13:11 +0800)]
caif_virtio: fix race between virtio_device_ready() and ndo_open()
We currently depend on probe() calling virtio_device_ready() -
which happens after netdev
registration. Since ndo_open() can be called immediately
after register_netdev, this means there exists a race between
ndo_open() and virtio_device_ready(): the driver may start to use the
device (e.g. TX) before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the
virtio_device_ready() with rtnl_lock() to make sure ndo_open() can
only be called after virtio_device_ready().
Fixes: 0becb56749060 ("caif_virtio: Introduce caif over virtio") Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220620051115.3142-3-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 17 Jun 2022 07:29:49 +0000 (15:29 +0800)]
virtio-net: fix race between ndo_open() and virtio_device_ready()
We currently call virtio_device_ready() after netdev
registration. Since ndo_open() can be called immediately
after register_netdev, this means there exists a race between
ndo_open() and virtio_device_ready(): the driver may start to use the
device before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the
virtio_device_ready() with rtnl_lock() to make sure ndo_open() can
only be called after virtio_device_ready().
Fixes: c0110892800dd ("virtio_net: enable VQs early") Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220617072949.30734-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It was caused by the 'l' passed into tipc_bcast_rcv() is NULL. When it
creates a node in tipc_node_check_dest(), after inserting the new node
into hashtable in tipc_node_create(), it creates the bc link. However,
there is a gap between this insert and bc link creation, a bc packet
may come in and get the node from the hashtable then try to dereference
its bc link, which is NULL.
This patch is to fix it by moving the bc link creation before inserting
into the hashtable.
Note that for a preliminary node becoming "real", the bc link creation
should also be called before it's rehashed, as we don't create it for
preliminary nodes.
Fixes: eca3efe0de7a ("tipc: enable creating a "preliminary" node") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 Jun 2022 15:30:20 +0000 (15:30 +0000)]
tunnels: do not assume mac header is set in skb_tunnel_check_pmtu()
Recently added debug in commit f9aefd6b2aa3 ("net: warn if mac header
was not set") caught a bug in skb_tunnel_check_pmtu(), as shown
in this syzbot report [1].
In ndo_start_xmit() paths, there is really no need to use skb->mac_header,
because skb->data is supposed to point at it.
Fixes: 6aabe1545775 ("tunnels: PMTU discovery support for directly bridged IP packets") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jean Delvare [Tue, 21 Jun 2022 13:55:11 +0000 (15:55 +0200)]
platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource
Unlike release_mem_region(), a call to release_resource() does not
free the resource, so it has to be freed explicitly to avoid a memory
leak.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 9db846d4cbfe ("platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220621155511.5b266395@endymion.delvare Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Dan Carpenter [Wed, 15 Jun 2022 08:11:07 +0000 (11:11 +0300)]
platform/mellanox: nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
This should return PTR_ERR() instead of IS_ERR(). Also "dev->client"
has been set to NULL by this point so it returns 0/success so preserve
the error code earlier.
Fixes: d6a845788cec ("platform/mellanox: Add support for new SN2201 system") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/YqmUGwmPK7cPolk/@kili Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Gayatri Kammela [Wed, 15 Jun 2022 00:27:51 +0000 (17:27 -0700)]
platform/x86: intel/pmc: Add Alder Lake N support to PMC core driver
Add Alder Lake N (ADL-N) to the list of the platforms that Intel's
PMC core driver supports. Alder Lake N reuses all the TigerLake PCH IPs.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20220615002751.3371730-1-gayatri.kammela@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Linus Torvalds [Sun, 26 Jun 2022 21:00:55 +0000 (14:00 -0700)]
Merge tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
Linus Torvalds [Sun, 26 Jun 2022 19:12:25 +0000 (12:12 -0700)]
Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Enable ignore_missing_thread in 'perf stat', enabling counting with
'--pid' when threads disappear during counting session setup
- Adjust output data offset for backward compatibility in 'perf inject'
- Fix missing free in copy_kcore_dir() in 'perf inject'
- Fix caching files with a wrong build ID
- Sync drm, cpufeatures, vhost and svn headers with the kernel
* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools include UAPI: Sync linux/vhost.h with the kernel sources
perf stat: Enable ignore_missing_thread
perf inject: Adjust output data offset for backward compatibility
perf trace beauty: Fix generation of errno id->str table on ALT Linux
perf build-id: Fix caching files with a wrong build ID
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf inject: Fix missing free in copy_kcore_dir()
projects / kernel.git / log