Michal Hocko [Thu, 16 Nov 2017 01:33:26 +0000 (17:33 -0800)]
mm: distinguish CMA and MOVABLE isolation in has_unmovable_pages()
Joonsoo has noticed that "mm: drop migrate type checks from
has_unmovable_pages" would break CMA allocator because it relies on
has_unmovable_pages returning false even for CMA pageblocks which in
fact don't have to be movable:
This is a result of the code sharing between CMA and memory hotplug
while each one has a different idea of what has_unmovable_pages should
return. This is unfortunate but fixing it properly would require a lot
of code duplication.
Fix the issue by introducing the requested migrate type argument and
special case MIGRATE_CMA case where CMA page blocks are handled
properly. This will work for memory hotplug because it requires
MIGRATE_MOVABLE.
Link: http://lkml.kernel.org/r/20171019122118.y6cndierwl2vnguj@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Ran Wang <ran.wang_1@nxp.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Igor Mammedov <imammedo@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current implementation will fail the operation after several failed
page migration attempts but we shouldn't even attempt to migrate that
memory and fail right away because this memory is clearly not
migrateable. This will become a real problem when we drop the retry
loop counter resp. timeout.
The real problem is in has_unmovable_pages in fact. We should fail if
there are any non migrateable pages in the area. In orther to guarantee
that remove the migrate type checks because MIGRATE_MOVABLE is not
guaranteed to contain only migrateable pages. It is merely a heuristic.
Similarly MIGRATE_CMA does guarantee that the page allocator doesn't
allocate any non-migrateable pages from the block but CMA allocations
themselves are unlikely to migrateable. Therefore remove both checks.
[akpm@linux-foundation.org: remove unused local `mt'] Link: http://lkml.kernel.org/r/20171013120013.698-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ran Wang <ran.wang_1@nxp.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tahsin Erdogan [Thu, 16 Nov 2017 01:33:19 +0000 (17:33 -0800)]
mm/page-writeback.c: remove unused parameter from balance_dirty_pages()
"mapping" parameter to balance_dirty_pages() is not used anymore.
Fixes: dfb8ae567835 ("writeback: let balance_dirty_pages() work on the matching cgroup bdi_writeback") Link: http://lkml.kernel.org/r/20170927221311.23263-1-tahsin@google.com Signed-off-by: Tahsin Erdogan <tahsin@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Ying [Thu, 16 Nov 2017 01:33:15 +0000 (17:33 -0800)]
mm, swap: fix false error message in __swp_swapcount()
When a page fault occurs for a swap entry, the physical swap readahead
(not the VMA base swap readahead) may readahead several swap entries
after the fault swap entry. The readahead algorithm calculates some of
the swap entries to readahead via increasing the offset of the fault
swap entry without checking whether they are beyond the end of the swap
device and it relys on the __swp_swapcount() and swapcache_prepare() to
check it. Although __swp_swapcount() checks for the swap entry passed
in, it will complain with the error message as follow for the expected
invalid swap entry. This may make the end users confused.
To fix the false error message, the swap entry checking is added in
swapin_readahead() to avoid to pass the out-of-bound swap entries and
the swap entry reserved for the swap header to __swp_swapcount() and
swapcache_prepare().
Link: http://lkml.kernel.org/r/20171102054225.22897-1-ying.huang@intel.com Fixes: e8c26ab60598 ("mm/swap: skip readahead for unreferenced swap slots") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Christian Kujau <lists@nerdbynature.de> Acked-by: Minchan Kim <minchan@kernel.org> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Thu, 16 Nov 2017 01:33:11 +0000 (17:33 -0800)]
mm: swap: SWP_SYNCHRONOUS_IO: skip swapcache only if swapped page has no other reference
When SWP_SYNCHRONOUS_IO swapped-in pages are shared by several
processes, it can cause unnecessary memory wastage by skipping swap
cache. Because, with swapin fault by read, they could share a page if
the page were in swap cache. Thus, it avoids allocating same content
new pages.
This patch makes the swapcache skipping work only if the swap pte is
non-sharable.
[akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1507620825-5537-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Thu, 16 Nov 2017 01:33:07 +0000 (17:33 -0800)]
mm, swap: skip swapcache for swapin of synchronous device
With fast swap storage, the platforms want to use swap more aggressively
and swap-in is crucial to application latency.
The rw_page() based synchronous devices like zram, pmem and btt are such
fast storage. When I profile swapin performance with zram lz4
decompress test, S/W overhead is more than 70%. Maybe, it would be
bigger in nvdimm.
This patch aims to reduce swap-in latency by skipping swapcache if the
swap device is synchronous device like rw_page based device. It
enhances 45% my swapin test(5G sequential swapin, no readahead, from
2.41sec to 1.64sec).
Link: http://lkml.kernel.org/r/1505886205-9671-5-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Thu, 16 Nov 2017 01:33:04 +0000 (17:33 -0800)]
mm, swap: introduce SWP_SYNCHRONOUS_IO
If rw-page based fast storage is used for swap devices, we need to
detect it to enhance swap IO operations. This patch is preparation for
optimizing of swap-in operation with next patch.
Link: http://lkml.kernel.org/r/1505886205-9671-4-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
someday we will remove rw_page(). If so, we need something to detect
such super-fast storage on which synchronous IO operations like the
current rw_page are always a win.
Introduces BDI_CAP_SYNCHRONOUS_IO to indicate such devices. With it, we
could use various optimization techniques.
Link: http://lkml.kernel.org/r/1505886205-9671-3-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Thu, 16 Nov 2017 01:32:56 +0000 (17:32 -0800)]
zram: set BDI_CAP_STABLE_WRITES once
With fast swap storage, the platform wants to use swap more aggressively
and swap-in is crucial to application latency.
The rw_page() based synchronous devices like zram, pmem and btt are such
fast storage. When I profile swapin performance with zram lz4
decompress test, S/W overhead is more than 70%. Maybe, it would be
bigger in nvdimm.
This patchset reduces swap-in latency by skipping swapcache if the swap
device is a synchronous device like a rw_page() based device.
It enhances by 45% my swapin test (5G sequential swapin, no readahead)
from 2.41sec to 1.64sec.
This patch (of 4):
Commit 19b7ccf8651d ("block: get rid of blk_integrity_revalidate()")
fixed a weird thing (i.e., reset BDI_CAP_STABLE_WRITES flag
unconditionally whenever revalidat_disk is called) so zram doesn't need
to reset the flag any more when revalidating the bdev. Instead, set the
flag just once when the zram device is created.
It shouldn't change any behavior.
Link: http://lkml.kernel.org/r/1505886205-9671-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hugh Dickins <hughd@google.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
include/linux/slab.h: add kmalloc_array_node() and kcalloc_node()
Patch series "Add kmalloc_array_node() and kcalloc_node()".
Our current memeory allocation routines suffer form an API imbalance,
for one we have kmalloc_array() and kcalloc() which check for overflows
in size multiplication and we have kmalloc_node() and kzalloc_node()
which allow for memory allocation on a certain NUMA node but don't check
for eventual overflows.
This patch (of 6):
We have kmalloc_array() and kcalloc() wrappers on top of kmalloc() which
ensure us overflow free multiplication for the size of a memory
allocation but these implementations are not NUMA-aware.
Likewise we have kmalloc_node() which is a NUMA-aware version of
kmalloc() but the implementation is not aware of any possible overflows
in eventual size calculations.
Introduce a combination of the two above cases to have a NUMA-node aware
version of kmalloc_array() and kcalloc().
Link: http://lkml.kernel.org/r/20170927082038.3782-2-jthumshirn@suse.de Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: David Rientjes <rientjes@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mike Marciniszyn <infinipath@intel.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miles Chen [Thu, 16 Nov 2017 01:32:25 +0000 (17:32 -0800)]
slub: fix sysfs duplicate filename creation when slub_debug=O
When slub_debug=O is set. It is possible to clear debug flags for an
"unmergeable" slab cache in kmem_cache_open(). It makes the "unmergeable"
cache became "mergeable" in sysfs_slab_add().
These caches will generate their "unique IDs" by create_unique_id(), but
it is possible to create identical unique IDs. In my experiment,
sgpool-128, names_cache, biovec-256 generate the same ID ":Ft-0004096" and
the kernel reports "sysfs: cannot create duplicate filename
'/kernel/slab/:Ft-0004096'".
To repeat my experiment, set disable_higher_order_debug=1,
CONFIG_SLUB_DEBUG_ON=y in kernel-4.14.
Fix this issue by setting unmergeable=1 if slub_debug=O and the the
default slub_debug contains any no-merge flags.
call path:
kmem_cache_create()
__kmem_cache_alias() -> we set SLAB_NEVER_MERGE flags here
create_cache()
__kmem_cache_create()
kmem_cache_open() -> clear DEBUG_METADATA_FLAGS
sysfs_slab_add() -> the slab cache is mergeable now
sysfs: cannot create duplicate filename '/kernel/slab/:Ft-0004096'
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x60/0x7c
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.0-rc7ajb-00131-gd4c2e9f-dirty #123
Hardware name: linux,dummy-virt (DT)
task: ffffffc07d4e0080 task.stack: ffffff8008008000
PC is at sysfs_warn_dup+0x60/0x7c
LR is at sysfs_warn_dup+0x60/0x7c
pc : lr : pstate: 60000145
Call trace:
sysfs_warn_dup+0x60/0x7c
sysfs_create_dir_ns+0x98/0xa0
kobject_add_internal+0xa0/0x294
kobject_init_and_add+0x90/0xb4
sysfs_slab_add+0x90/0x200
__kmem_cache_create+0x26c/0x438
kmem_cache_create+0x164/0x1f4
sg_pool_init+0x60/0x100
do_one_initcall+0x38/0x12c
kernel_init_freeable+0x138/0x1d4
kernel_init+0x10/0xfc
ret_from_fork+0x10/0x18
Link: http://lkml.kernel.org/r/1510365805-5155-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Thu, 16 Nov 2017 01:32:14 +0000 (17:32 -0800)]
mm/slab.c: only set __GFP_RECLAIMABLE once
SLAB_RECLAIM_ACCOUNT is a permanent attribute of a slab cache. Set
__GFP_RECLAIMABLE as part of its ->allocflags rather than check the
cachep flag on every page allocation.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1710171527560.140898@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miles Chen [Thu, 16 Nov 2017 01:32:10 +0000 (17:32 -0800)]
mm/slob.c: remove an unnecessary check for __GFP_ZERO
Current flow guarantees a valid pointer when handling the __GFP_ZERO
case. So remove the unnecessary NULL pointer check.
Link: http://lkml.kernel.org/r/1507203141-11959-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Shi [Thu, 16 Nov 2017 01:32:07 +0000 (17:32 -0800)]
mm: oom: show unreclaimable slab info when unreclaimable slabs > user memory
The kernel may panic when an oom happens without killable process
sometimes it is caused by huge unreclaimable slabs used by kernel.
Although kdump could help debug such problem, however, kdump is not
available on all architectures and it might be malfunction sometime.
And, since kernel already panic it is worthy capturing such information
in dmesg to aid touble shooting.
Print out unreclaimable slab info (used size and total size) which
actual memory usage is not zero (num_objs * size != 0) when
unreclaimable slabs amount is greater than total user memory (LRU
pages).
Yang Shi [Thu, 16 Nov 2017 01:32:03 +0000 (17:32 -0800)]
mm: slabinfo: remove CONFIG_SLABINFO
According to discussion with Christoph
(https://marc.info/?l=linux-kernel&m=150695909709711&w=2), it sounds like
it is pointless to keep CONFIG_SLABINFO around.
This patch removes the CONFIG_SLABINFO config option, but /proc/slabinfo
is still available.
Yang Shi [Thu, 16 Nov 2017 01:31:59 +0000 (17:31 -0800)]
tools: slabinfo: add "-U" option to show unreclaimable slabs only
Patch series "oom: capture unreclaimable slab info in oom message", v10.
Recently we ran into a oom issue, kernel panic due to no killable
process. The dmesg shows huge unreclaimable slabs used almost 100%
memory, but kdump doesn't capture vmcore due to some reason.
So, it may sound better to capture unreclaimable slab info in oom
message when kernel panic to aid trouble shooting and cover the corner
case. Since kernel already panic, so capturing more information sounds
worthy and doesn't bother normal oom killer.
With the patchset, tools/vm/slabinfo has a new option, "-U", to show
unreclaimable slab only.
And, oom will print all non zero (num_objs * size != 0) unreclaimable
slabs in oom killer message.
This patch (of 3):
Add "-U" option to show unreclaimable slabs only.
"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.
Link: http://lkml.kernel.org/r/1507152550-46205-2-git-send-email-yang.s@alibaba-inc.com Signed-off-by: Yang Shi <yang.s@alibaba-inc.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changwei Ge [Thu, 16 Nov 2017 01:31:52 +0000 (17:31 -0800)]
ocfs2/dlm: get mle inuse only when it is initialized
When dlm_add_migration_mle returns -EEXIST, previously input mle will
not be initialized. So we can't use its associated dlm object. And we
truly don't need this mle for already launched migration progress, since
oldmle has taken this role.
Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED7AA61@H3CMLB14-EX.srv.huawei-3com.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alex chen [Thu, 16 Nov 2017 01:31:48 +0000 (17:31 -0800)]
ocfs2: subsystem.su_mutex is required while accessing the item->ci_parent
The subsystem.su_mutex is required while accessing the item->ci_parent,
otherwise, NULL pointer dereference to the item->ci_parent will be
triggered in the following situation:
add node delete node
sys_write
vfs_write
configfs_write_file
o2nm_node_store
o2nm_node_local_write
do_rmdir
vfs_rmdir
configfs_rmdir
mutex_lock(&subsys->su_mutex);
unlink_obj
item->ci_group = NULL;
item->ci_parent = NULL;
to_o2nm_cluster_from_node
node->nd_item.ci_parent->ci_parent
BUG since of NULL pointer dereference to nd_item.ci_parent
Moreover, the o2nm_cluster also should be protected by the
subsystem.su_mutex.
[alex.chen@huawei.com: v2] Link: http://lkml.kernel.org/r/59EEAA69.9080703@huawei.com Link: http://lkml.kernel.org/r/59E9B36A.10700@huawei.com Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alex chen [Thu, 16 Nov 2017 01:31:44 +0000 (17:31 -0800)]
ocfs2: ip_alloc_sem should be taken in ocfs2_get_block()
ip_alloc_sem should be taken in ocfs2_get_block() when reading file in
DIRECT mode to prevent concurrent access to extent tree with
ocfs2_dio_end_io_write(), which may cause BUGON in the following
situation:
read file 'A' end_io of writing file 'A'
vfs_read
__vfs_read
ocfs2_file_read_iter
generic_file_read_iter
ocfs2_direct_IO
__blockdev_direct_IO
do_blockdev_direct_IO
do_direct_IO
get_more_blocks
ocfs2_get_block
ocfs2_extent_map_get_blocks
ocfs2_get_clusters
ocfs2_get_clusters_nocache()
ocfs2_search_extent_list
return the index of record which
contains the v_cluster, that is
v_cluster > rec[i]->e_cpos.
ocfs2_dio_end_io
ocfs2_dio_end_io_write
down_write(&oi->ip_alloc_sem);
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_split_extent
...
--> modify the rec[i]->e_cpos, resulting
in v_cluster < rec[i]->e_cpos.
BUG_ON(v_cluster < le32_to_cpu(rec->e_cpos))
[alex.chen@huawei.com: v3] Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com Fixes: c15471f79506 ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Gang He <ghe@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alex chen [Thu, 16 Nov 2017 01:31:40 +0000 (17:31 -0800)]
ocfs2: should wait dio before inode lock in ocfs2_setattr()
we should wait dio requests to finish before inode lock in
ocfs2_setattr(), otherwise the following deadlock will happen:
process 1 process 2 process 3
truncate file 'A' end_io of writing file 'A' receiving the bast messages
ocfs2_setattr
ocfs2_inode_lock_tracker
ocfs2_inode_lock_full
inode_dio_wait
__inode_dio_wait
-->waiting for all dio
requests finish
dlm_proxy_ast_handler
dlm_do_local_bast
ocfs2_blocking_ast
ocfs2_generic_handle_bast
set OCFS2_LOCK_BLOCKED flag
dio_end_io
dio_bio_end_aio
dio_complete
ocfs2_dio_end_io
ocfs2_dio_end_io_write
ocfs2_inode_lock
__ocfs2_cluster_lock
ocfs2_wait_for_mask
-->waiting for OCFS2_LOCK_BLOCKED
flag to be cleared, that is waiting
for 'process 1' unlocking the inode lock
inode_dio_end
-->here dec the i_dio_count, but will never
be called, so a deadlock happened.
Link: http://lkml.kernel.org/r/59F81636.70508@huawei.com Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
piaojun [Thu, 16 Nov 2017 01:31:37 +0000 (17:31 -0800)]
ocfs2: clean up some unused function declarations
Link: http://lkml.kernel.org/r/59C5D7D6.9050106@huawei.com Signed-off-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Alex Chen <alex.chen@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changwei Ge [Thu, 16 Nov 2017 01:31:33 +0000 (17:31 -0800)]
ocfs2: fix cluster hang after a node dies
When a node dies, other live nodes have to choose a new master for an
existed lock resource mastered by the dead node.
As for ocfs2/dlm implementation, this is done by function -
dlm_move_lockres_to_recovery_list which marks those lock rsources as
DLM_LOCK_RES_RECOVERING and manages them via a list from which DLM
changes lock resource's master later.
So without invoking dlm_move_lockres_to_recovery_list, no master will be
choosed after dlm recovery accomplishment since no lock resource can be
found through ::resource list.
What's worse is that if DLM_LOCK_RES_RECOVERING is not marked for lock
resources mastered a dead node, it will break up synchronization among
nodes.
So invoke dlm_move_lockres_to_recovery_list again.
Fixs: 'commit ee8f7fcbe638 ("ocfs2/dlm: continue to purge recovery lockres when recovery master goes down")' Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED6E0F9@H3CMLB14-EX.srv.huawei-3com.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Reported-by: Vitaly Mayatskih <v.mayatskih@gmail.com> Tested-by: Vitaly Mayatskikh <v.mayatskih@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
piaojun [Thu, 16 Nov 2017 01:31:29 +0000 (17:31 -0800)]
ocfs2: cleanup unused func declaration and assignment
Link: http://lkml.kernel.org/r/59E064BB.8000005@huawei.com Signed-off-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
piaojun [Thu, 16 Nov 2017 01:31:25 +0000 (17:31 -0800)]
ocfs2: no need flush workqueue before destroying it
destroy_workqueue() will do flushing work for us.
Link: http://lkml.kernel.org/r/59E06476.3090502@huawei.com Signed-off-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The m32r Kconfig provides both CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN
configuration options. As they are user-selectable and independent,
this allows invalid configurations:
- All m32r defconfigs build a big endian kernel, but CPU_BIG_ENDIAN is
not set, causing compiler warnings like:
- Since commit 5bdfca6435b82944 ("m32r: define CPU_BIG_ENDIAN"),
building an allmodconfig or allyesconfig enables both
CONFIG_CPU_BIG_ENDIAN and CONFIG_CPU_LITTLE_ENDIAN.
While this did get rid of the warning above, both options are
obviously mutually exclusive.
Fix this by making only CPU_LITTLE_ENDIAN configurable by the user, as
before, and by making sure exactly one of CPU_BIG_ENDIAN and
CPU_LITTLE_ENDIAN is always enabled.
Linus Torvalds [Wed, 15 Nov 2017 18:56:56 +0000 (10:56 -0800)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The big highlight is support for the Scalable Vector Extension (SVE)
which required extensive ABI work to ensure we don't break existing
applications by blowing away their signal stack with the rather large
new vector context (<= 2 kbit per vector register). There's further
work to be done optimising things like exception return, but the ABI
is solid now.
Much of the line count comes from some new PMU drivers we have, but
they're pretty self-contained and I suspect we'll have more of them in
future.
Plenty of acronym soup here:
- initial support for the Scalable Vector Extension (SVE)
- improved handling for SError interrupts (required to handle RAS
events)
- enable GCC support for 128-bit integer types
- remove kernel text addresses from backtraces and register dumps
- use of WFE to implement long delay()s
- ACPI IORT updates from Lorenzo Pieralisi
- perf PMU driver for the Statistical Profiling Extension (SPE)
- perf PMU driver for Hisilicon's system PMUs
- misc cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
arm64: Make ARMV8_DEPRECATED depend on SYSCTL
arm64: Implement __lshrti3 library function
arm64: support __int128 on gcc 5+
arm64/sve: Add documentation
arm64/sve: Detect SVE and activate runtime support
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: Add sysctl to set the default vector length for new processes
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: ptrace and ELF coredump support
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Backend logic for setting the vector length
arm64/sve: Signal handling support
arm64/sve: Support vector length resetting for new processes
arm64/sve: Core task context handling
arm64/sve: Low-level CPU setup
...
Linus Torvalds [Wed, 15 Nov 2017 18:49:15 +0000 (10:49 -0800)]
Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux
Pull RISC-V architecture support from Palmer Dabbelt:
"This contains the core RISC-V Linux port, which has been through nine
rounds of review on various mailing lists. The port is not complete:
there's some cleanup patches moving through the review process, a
whole bunch of drivers that need some work, and a lot of feature
additions that will be needed.
The patches contained in this tag have been through nine rounds of
review on the various mailing lists. I have some outstanding cleanup
patches, but since there's been so much review on these patches I
thought it would be best to submit them as-is and then submit explicit
cleanup patches so everyone can review them. This first patch set is
big enough that it's a bit of a pain to constantly rewrite, and it's
caused a few headaches with various contributors.
The port is definately a work in progress. While what's there builds
and boots with 4.14, it's a bit hard to actually see anything happen
because there are no device drivers yet. I maintain a staging branch
that contains all the device drivers and cleanup that actually works,
but those patches won't all be ready for a while. I'd like to get what
we currently have into your tree so everyone can start working from a
single base -- of particular importance is allowing the glibc
upstreaming process to proceed so we can sort out any possibly
lingering user-visible ABI problems we might have.
Copied below is the ChangeLog that contains the history of this patch
set:
(v9) As per suggestions on our v8 patch set, I've split the core
architecture code out from our drivers and would like to submit
this patch set to be included into linux-next, with the goal
being to be merged in during the next merge window. This patch
set is based on 4.14-rc2, but if it's better to have it based on
something else then I can change it around.
This patch set contains just the core arch code for RISC-V, so
while it builds an nominally boots, you can't print or take an
interrupt so it's not that useful. If you're looking to actually
boot a system it would probably be better to use the full patch
set listed below.
We've collected a handful of tags from reviewers, and the
remainder of the patch set only got minimal feedback last time.
Here's what changed:
- We now use the device tree to initialize the timer driver so
it's less tighly coupled with the arch port.
- I cleaned up the defconfigs -- there's actually now just one,
and it's empty. For now I think we're OK with what the kernel
sets as defaults, but I anticipate we'll begin to expand this
as people start to use the port more.
- The VDSO symbols version is sane.
- We WFI while spinning in the boot loop.
- A handful of comments have been added.
While there are still a handful of FIXMEs in this patch set,
we've started to get enough interest from various users and
contributors that maintaining an out of tree patch set is
starting to become a big burden. Hopefully the patches are good
enough to merge now, which will at least get everyone working in
a more reasonable manner as we clean up the remaining issues.
(v8) I know it may not be the ideal time to submit a patch set right
now, as it's the middle of the merge window, but things have
calmed down quite a bit in the last month so I thought it would
be good to get everyone on the same page. There's been a handful
of changes since the last patch set, but most of them are fairly
minor:
- We changed PAGE_OFFSET to allowing mapping more physical
memory on 64-bit systems. This is user configurable, as it
triggers a different code model that generates slightly less
efficient code.
- The device tree binding documentation is back, I'd managed to
lose it at some point.
- We now pass the atomic64 test suite
- The SBI timer driver has been refactored.
(v7) It's been a while since my last patch set, but the changes han
been fairly minimal:
- The PCI cleanup patches have been dropped, we'll do them as a
separate patch set later.
- We've the Kconfig entries from CONFIG_ISA_* to
CONFIG_RISCV_ISA_*, to make grep easier.
- There have been a handful of memory model related tweaks in
I/O land, particularly relating the PCI and the upcoming
platform specification. There are significant comments in the
relevant files. This is still a WIP, but I think we're close
to getting as good as we're going to get until we end up with
some more specifications.
(v6) As it's been only a day since the v5 patch set, the changes are
pretty minimal:
- The patch set is now based on linux-next/master, which I
believe is a better base now that we're getting closer to
upstream.
- EARLY_PRINTK is no longer an option. Since the SBI console is
reasonable, there's no penalty to enabling it (and thus no
benefit to disabling it).
- The mmap syscalls were refactored a bit.
(v5) Things have really started to calm down, so this is fairly
similar to the v4 patch set. The most interesting changes
include:
- We've moved back to a single patch set.
- SMP support has been fixed, I was accidentally running on a
non-SMP configuration. There were various mistakes all over
the tree as a result of this.
- The cmpxchg syscalls have been removed, as they were deemed a
bad idea. As a result, RISC-V Linux systems mandate the A
extension. The corresponding Kconfig entry to enable builds
on non-A systems has been removed.
- A few more atomic fixes: mostly fence changes, but those
resulted in a handful of additional macros that were no
longer necessary.
- riscv_early_sie has been removed.
(v4) There have only been a few changes since the v3 patch set:
- The cmpxchg64 syscall is no longer enabled on 32-bit systems.
It's not possible to provide this on SMP systems, and it's
not necessary as glibc knows not to call it.
- We provide a ELF_HWCAP so users can determine the ISA of the
machine the kernel is running on.
- The multi-line comments are in a better form.
- There were a handful of headers that could be replaced with
the asm-generic versions, and a few unnecessary definitions.
- We no longer use printk, but instead use pr_*.
- A few Kconfig and defconfig entries have been cleaned up.
(v3) A highlight of the changes since the v2 patch set includes:
- We've split out all our drivers into separate patch sets,
which I've already sent out to the relevant maintainers. I
haven't included those patches in this patch set, but some of
them are necessary to build our port.
- The patch set is now split up differently: rather than being
split per directory it is split per topic. Hopefully this
will make it easier to review the port on the mailing list.
The split is a bit rough, so you probably still want to look
at the patch set as a whole.
- atomic.h has been completely rewritten and is hopefully now
correct. I've attempted to sanitize the various other memory
model related code as well, and I think it should all be sane
now aside from a handful of FIXMEs commented in the code.
- We've changed the cmpexchg syscall to always exist and to not
be multiplexed. There is also a VDSO entry for compare and
exchange, which allows kernels with the A extension to
execute user code without the A extension reasonably fast.
- Our user-visible register state now contains enough space for
the Q extension for 128-bit floating point, as well as a few
words to allow extensibility to future ISA extensions like
the eventual V extension for vectors.
- A handful of driver cleanups, but these have been split into
separate patch sets now so I won't duplicate them here.
(v2) A highlight of the changes since the v1 patch set includes:
- We've split out our drivers into the right places, which
means now there's a lot more patches. I'll be submitting
these patches to various subsystem maintainers and including
them in any future RISC-V patch sets until they've been
merged.
- The SBI console driver has been completely rewritten to use
the HVC helpers and is now significantly smaller.
- We've begun to use weaker barriers as opposed to just the big
"fence". There's still some work to do here, specifically:
- We need fences in the relaxed MMIO functions.
- The non-relaxed MMIO functions are missing R/W bits on their fences.
- Many AMOs need the aq and rl bits set.
- We now have thread_info in task_struct. As a result, sscratch
now contains TP instead of SP. This was necessary because
thread_info is no longer on the stack.
- A few shared routines have been added that we use instead of
creating another arch copy"
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
RISC-V: Build Infrastructure
RISC-V: User-facing API
RISC-V: Paging and MMU
RISC-V: Device, timer, IRQs, and the SBI
RISC-V: Task implementation
RISC-V: ELF and module implementation
RISC-V: Generic library routines and assembly
RISC-V: Atomic and Locking Code
RISC-V: Init and Halt Code
dt-bindings: RISC-V CPU Bindings
lib: Add shared copies of some GCC library routines
MAINTAINERS: Add RISC-V
Linus Torvalds [Wed, 15 Nov 2017 18:21:58 +0000 (10:21 -0800)]
Merge branch 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching updates from Jiri Kosina:
- shadow variables support, allowing livepatches to associate new
"shadow" fields to existing data structures, from Joe Lawrence
- pre/post patch callbacks API, allowing livepatch writers to register
callbacks to be called before and after patch application, from Joe
Lawrence
* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: __klp_disable_patch() should never be called for disabled patches
livepatch: Correctly call klp_post_unpatch_callback() in error paths
livepatch: add transition notices
livepatch: move transition "complete" notice into klp_complete_transition()
livepatch: add (un)patch callbacks
livepatch: Small shadow variable documentation fixes
livepatch: __klp_shadow_get_or_alloc() is local to shadow.c
livepatch: introduce shadow variable API
Linus Torvalds [Wed, 15 Nov 2017 17:43:57 +0000 (09:43 -0800)]
Merge branch 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- high resolution mode for Dell canvas support, from Benjamin Tissoires
- pen handling fixes for the Wacom driver, from Jason Gerecke
- i2c-hid: Apollo-Lake based laptops improvements, from Hans de Goede
- Input/Core: eraser tool support, from Ping Cheng
- new ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook
Stduio and HP Elite book x360) supportm from Masaki Ota
- other smaller assorted fixes
* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
HID: cp2112: fix broken gpio_direction_input callback
HID: cp2112: fix interface specification URL
HID: Wacom: switch Dell canvas into highres mode
HID: wacom: generic: Send BTN_STYLUS3 when both barrel switches are set
HID: sony: Fix SHANWAN pad rumbling on USB
HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 device
HID: add backlight level quirk for Asus ROG laptops
HID: cp2112: add HIDRAW dependency
HID: Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel
HID: hid-logitech: remove redundant assignment to pointer value
HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection
HID: rmi: Check that a device is a RMI device before calling RMI functions
HID: add multi-input quirk for GamepadBlock
HID: alps: add new U1 device ID
HID: alps: add support for Alps T4 Touchpad device
HID: alps: remove variables local to u1_init() from the device struct
HID: alps: properly handle max_fingers and minimum on X and Y axis
HID: alps: Separate U1 device code
HID: alps: delete unnecessary struct u1_dev devInfo
HID: usbhid: Convert timers to use timer_setup()
...
Jiri Kosina [Wed, 15 Nov 2017 10:14:23 +0000 (11:14 +0100)]
Merge branch 'for-4.15/wacom' into for-linus
- High resolution mode for DEll canvas support, from Benjamin Tissoires
- A lot of improvements to pen handling in the Wacom driver, from Jason Gerecke
Jiri Kosina [Wed, 15 Nov 2017 10:02:25 +0000 (11:02 +0100)]
Merge branch 'for-4.14/upstream-fixes' into for-linus
- Wacom: recognize PEN application collection properly, from Jason Gerecke
- RMI: avoid cofusion caused by RMI functions being by mistake called on
non-RMI devices, from Andrew Duggan
- small device-ID-specific quirks/fixes
Jiri Kosina [Wed, 15 Nov 2017 09:53:24 +0000 (10:53 +0100)]
Merge branch 'for-4.15/callbacks' into for-linus
This pulls in an infrastructure/API that allows livepatch writers to
register pre-patch and post-patch callbacks that allow for running a
glue code necessary for finalizing the patching if necessary.
Conflicts:
kernel/livepatch/core.c
- trivial conflict by adding a callback call into
module going notifier vs. moving that code block
to klp_cleanup_module_patches_limited()
Jiri Kosina [Wed, 15 Nov 2017 09:49:14 +0000 (10:49 +0100)]
Merge branch 'for-4.15/shadow-variables' into for-linus
Shadow variables allow callers to associate new shadow fields to existing data
structures. This is intended to be used by livepatch modules seeking to
emulate additions to data structure definitions.
Linus Torvalds [Wed, 15 Nov 2017 02:25:40 +0000 (18:25 -0800)]
Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"A bigger diffstat than usual with the kbuild changes and a tree wide
fix in the binding documentation.
Summary:
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing
memory leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node.
The prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to
dtb compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage
Technology, shimafuji, Tecon Microprocessor Technologies, DH
electronics GmbH, Opal Kelly, and Next Thing"
* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: usb: add #phy-cells to usb-nop-xceiv
dt-bindings: Remove leading zeros from bindings notation
kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
.gitignore: sort normal pattern rules alphabetically
dt-bindings: add vendor prefix for Next Thing Co.
scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
of: dynamic: fix memory leak related to properties of __of_node_dup
of: overlay: make pr_err() string unique
of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
of: overlay: remove unneeded check for NULL kbasename()
of: overlay: remove a dependency on device node full_name
of: overlay: simplify applying symbols from an overlay
of: overlay: avoid race condition between applying multiple overlays
of: overlay: loosen overly strict phandle clash check
of: overlay: expand check of whether overlay changeset can be removed
of: overlay: detect cases where device tree may become corrupt
of: overlay: minor restructuring
...
Linus Torvalds [Wed, 15 Nov 2017 02:09:31 +0000 (18:09 -0800)]
Merge tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"New LED class driver:
- add a driver for PC Engines APU/APU2 LEDs
New LED trigger:
- add a system activity LED trigger
LED core improvements:
- replace flags bit shift with BIT() macros
Convert timers to use timer_setup() in:
- led-core
- ledtrig-activity
- ledtrig-heartbeat
- ledtrig-transient
LED class drivers fixes:
- lp55xx: fix spelling mistake: 'cound' -> 'could'
- tca6507: Remove unnecessary reg check
- pca955x: Don't invert requested value in pca955x_gpio_set_value()
LED documentation improvements:
- update 00-INDEX file"
* tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: Add driver for PC Engines APU/APU2 LEDs
leds: lp55xx: fix spelling mistake: 'cound' -> 'could'
leds: Convert timers to use timer_setup()
Documentation: leds: Update 00-INDEX file
leds: tca6507: Remove unnecessary reg check
leds: ledtrig-heartbeat: Convert timers to use timer_setup()
leds: Replace flags bit shift with BIT() macros
leds: pca955x: Don't invert requested value in pca955x_gpio_set_value()
leds: ledtrig-activity: Add a system activity LED trigger
Linus Torvalds [Wed, 15 Nov 2017 02:01:46 +0000 (18:01 -0800)]
Merge tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are no big surprising changes in this cycle, yet not too boring,
either. The biggest change from diffstat POV is the removal of the
legacy OSS driver codes that have been already disabled for a long
time. This will bring a few trivial merge conflicts.
As new features in ASoC side, there are two things: a new AC97 bus
implementation and AMD Stony platform support. Both include the
relevant changes shared with other subsystems, e.g. AC97 MFD changes
and DRM AMD changes.
Some other highlighted topics are:
- A bunch of USB-audio drivers got the hardening against the
malicious device accesses with a new helper code for endpoint
sanity check
- Lots of cleanups for ASoC Intel platform code, including support
for their open source audio firmware
- Continued ASoC core componentization works
- Support for scaling MCLK with sample rate in ASoC simple-card
- Stabler PCM hot-unplug capability, especially for ASoC usages"
* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
Documentation: sound: hd-audio: notes.rst
ASoC: bcm2835: Support left/right justified and DSP modes
ASoC: bcm2835: Enforce full symmetry
ASoC: bcm2835: Support additional samplerates up to 384kHz
ASoC: bcm2835: Add support for TDM modes
ASoC: add mclk-fs support to audio graph card
ASoC: add mclk-fs to audio graph card binding
ASoC: rt5514: work around link error
ASoC: rt5514: mark PM functions as __maybe_unused
ASoC: rt5663: Check the JD status in the button pushing
ASoC: amd: Modified DMA transfer Mechanism for Playback
ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
ASoC: da7213: add support for DSP modes
ASoC: sun8i-codec: Add a comment on the LRCK inversion
ASoC: sun8i-codec: Set the BCLK divider
ASoC: rt5663: Delay and retry reading rt5663 ID register
ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
ASoC: cs42l56: Fix reset GPIO name in example DT binding
ASoC: rt5514-spi: check irq status to schedule data copy in resume function
...
Linus Torvalds [Wed, 15 Nov 2017 01:52:21 +0000 (17:52 -0800)]
Merge branch 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This contains two bigger than usual tree-wide changes this time. They
all have proper acks, caused no merge conflicts in linux-next where
they have been for a while. They are namely:
- to-gpiod conversion of the i2c-gpio driver and its users (touching
arch/* and drivers/mfd/*)
- adding a sbs-manager based on I2C core updates to SMBus alerts
(touching drivers/power/*)
Other notable changes:
- i2c_boardinfo can now carry a dev_name to be used when the device
is created. This is because some devices in ACPI world need fixed
names to find the regulators.
- the designware driver got a long discussed overhaul of its PM
handling. img-scb and davinci got PM support, too.
- at24 driver has way better OF support. And it has a new maintainer.
Thanks Bartosz for stepping up!
The rest is regular driver updates and fixes"
* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
ARM: sa1100: simpad: Correct I2C GPIO offsets
i2c: aspeed: Deassert reset in probe
eeprom: at24: Add OF device ID table
MAINTAINERS: new maintainer for AT24 driver
i2c: nuc900: remove platform_data, too
i2c: thunderx: Remove duplicate NULL check
i2c: taos-evm: Remove duplicate NULL check
i2c: Make i2c_unregister_device() NULL-aware
i2c: xgene-slimpro: Support v2
i2c: mpc: remove useless variable initialization
i2c: omap: Trigger bus recovery in lockup case
i2c: gpio: Add support for named gpios in DT
dt-bindings: i2c: i2c-gpio: Add support for named gpios
i2c: gpio: Local vars in probe
i2c: gpio: Augment all boardfiles to use open drain
i2c: gpio: Enforce open drain through gpiolib
gpio: Make it possible for consumers to enforce open drain
i2c: gpio: Convert to use descriptors
power: supply: sbs-message: fix some code style issues
power: supply: sbs-battery: remove unchecked return var
...
Linus Torvalds [Wed, 15 Nov 2017 01:23:44 +0000 (17:23 -0800)]
Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.15 kernel cycle:
Core:
- Fix the semantics of raw GPIO to actually be raw. No inversion
semantics as before, but also no open draining, and allow the raw
operations to affect lines used for interrupts as the caller
supposedly knows what they are doing if they are getting the big
hammer.
- Rewrote the __inner_function() notation calls to names that make
more sense. I just find this kind of code disturbing.
- Drop the .irq_base() field from the gpiochip since now all IRQs are
mapped dynamically. This is nice.
- Support for .get_multiple() in the core driver API. This allows us
to read several GPIO lines with a single register read. This has
high value for some usecases: it can be used to create
oscilloscopes and signal analyzers and other things that rely on
reading several lines at exactly the same instant. Also a generally
nice optimization. This uses the new assign_bit() macro from the
bitops lib that was ACKed by Andrew Morton and is implemented for
two drivers, one of them being the generic MMIO driver so everyone
using that will be able to benefit from this.
- Do not allow requests of Open Drain and Open Source setting of a
GPIO line simultaneously. If the hardware actually supports
enabling both at the same time the electrical result would be
disastrous.
- A new interrupt chip core helper. This will be helpful to deal with
"banked" GPIOs, which means GPIO controllers with several logical
blocks of GPIO inside them. This is several gpiochips per device in
the device model, in contrast to the case when there is a 1-to-1
relationship between a device and a gpiochip.
New drivers:
- Maxim MAX3191x industrial serializer, a very interesting piece of
professional I/O hardware.
- Uniphier GPIO driver. This is the GPIO block from the recent
Socionext (ex Fujitsu and Panasonic) platform.
- Tegra 186 driver. This is based on the new banked GPIO
infrastructure.
Other improvements:
- Some documentation improvements.
- Wakeup support for the DesignWare DWAPB GPIO controller.
- Reset line support on the DesignWare DWAPB GPIO controller.
- Several non-critical bug fixes and improvements for the Broadcom
BRCMSTB driver.
- Misc non-critical bug fixes like exotic errorpaths, removal of dead
code etc.
- Explicit comments on fall-through switch() statements"
* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
gpio: tegra186: Remove tegra186_gpio_lock_class
gpio: rcar: Add r8a77995 (R-Car D3) support
pinctrl: bcm2835: Fix some merge fallout
gpio: Fix undefined lock_dep_class
gpio: Automatically add lockdep keys
gpio: Introduce struct gpio_irq_chip.first
gpio: Disambiguate struct gpio_irq_chip.nested
gpio: Add Tegra186 support
gpio: Export gpiochip_irq_{map,unmap}()
gpio: Implement tighter IRQ chip integration
gpio: Move lock_key into struct gpio_irq_chip
gpio: Move irq_valid_mask into struct gpio_irq_chip
gpio: Move irq_nested into struct gpio_irq_chip
gpio: Move irq_chained_parent to struct gpio_irq_chip
gpio: Move irq_default_type to struct gpio_irq_chip
gpio: Move irq_handler to struct gpio_irq_chip
gpio: Move irqdomain into struct gpio_irq_chip
gpio: Move irqchip into struct gpio_irq_chip
gpio: Introduce struct gpio_irq_chip
pinctrl: armada-37xx: remove unused variable
...
Linus Torvalds [Wed, 15 Nov 2017 00:54:12 +0000 (16:54 -0800)]
Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- turn dma_cache_sync into a dma_map_ops instance and remove
implementation that purely are dead because the architecture doesn't
support noncoherent allocations
- add a flag for busses that need DMA configuration (Robin Murphy)
* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: turn dma_cache_sync into a dma_map_ops method
sh: make dma_cache_sync a no-op
xtensa: make dma_cache_sync a no-op
unicore32: make dma_cache_sync a no-op
powerpc: make dma_cache_sync a no-op
mn10300: make dma_cache_sync a no-op
microblaze: make dma_cache_sync a no-op
ia64: make dma_cache_sync a no-op
frv: make dma_cache_sync a no-op
x86: make dma_cache_sync a no-op
floppy: consolidate the dummy fd_cacheflush definition
drivers: flag buses which demand DMA configuration
Linus Torvalds [Wed, 15 Nov 2017 00:49:31 +0000 (16:49 -0800)]
Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"Updates for this cycle include:
- new driver for Spreadtrum dma controller, ST MDMA and DMAMUX
controllers
- PM support for IMG MDC drivers
- updates to bcm-sba-raid driver and improvements to sun6i driver
- subsystem conversion for:
- timers to use timer_setup()
- remove usage of PCI pool API
- usage of %p format specifier
- minor updates to bunch of drivers"
* tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits)
dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
dmaengine: dmatest: warn user when dma test times out
dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue"
dmaengine: stm32_mdma: activate pack/unpack feature
dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad
dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad
MAINTAINERS: Step down from a co-maintaner of DW DMAC driver
dmaengine: pch_dma: Replace PCI pool old API
dmaengine: Convert timers to use timer_setup()
dmaengine: sprd: Add Spreadtrum DMA driver
dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller
dmaengine: sun6i: Retrieve channel count/max request from devicetree
dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs
dmaengine: bcm-sba-raid: Use common GPL comment header
dmaengine: bcm-sba-raid: Use only single mailbox channel
dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock
dmaengine: pl330: fix descriptor allocation fail
dmaengine: rcar-dmac: use TCRB instead of TCR for residue
dmaengine: sun6i: Add support for Allwinner A64 and compatibles
arm64: allwinner: a64: Add devicetree binding for DMA controller
...
Linus Torvalds [Wed, 15 Nov 2017 00:43:27 +0000 (16:43 -0800)]
Merge tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfio
Pull IOMMU updates from Alex Williamson:
"As Joerg mentioned[1], he's out on paternity leave through the end of
the year and I'm filling in for him in the interim:
- Enforce MSI multiple IRQ alignment in AMD IOMMU
- VT-d PASID error handling fixes
- Add r8a7795 IPMMU support
- Manage runtime PM links on exynos at {add,remove}_device callbacks
- Fix Mediatek driver name to avoid conflict
- Add terminate support to qcom fault handler
- 64-bit IOVA optimizations
- Simplfy IOVA domain destruction, better use of rcache, and skip
anchor nodes on copy
- Convert to IOMMU TLB sync API in io-pgtable-arm{-v7s}
- Drop command queue lock when waiting for CMD_SYNC completion on ARM
SMMU implementations supporting MSI to cacheable memory
- iomu-vmsa cleanup inspired by missed IOTLB sync callbacks
- Fix sleeping lock with preemption disabled for RT
- Dual MMU support for TI DRA7xx DSPs
- Optional flush option on IOVA allocation avoiding overhead when
caller can try other options
[1] https://lkml.org/lkml/2017/10/22/72"
* tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfio: (54 commits)
iommu/iova: Use raw_cpu_ptr() instead of get_cpu_ptr() for ->fq
iommu/mediatek: Fix driver name
iommu/ipmmu-vmsa: Hook up r8a7795 DT matching code
iommu/ipmmu-vmsa: Allow two bit SL0
iommu/ipmmu-vmsa: Make IMBUSCTR setup optional
iommu/ipmmu-vmsa: Write IMCTR twice
iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master
iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE()
iommu/ipmmu-vmsa: Enable multi context support
iommu/ipmmu-vmsa: Add optional root device feature
iommu/ipmmu-vmsa: Introduce features, break out alias
iommu/ipmmu-vmsa: Unify ipmmu_ops
iommu/ipmmu-vmsa: Clean up struct ipmmu_vmsa_iommu_priv
iommu/ipmmu-vmsa: Simplify group allocation
iommu/ipmmu-vmsa: Unify domain alloc/free
iommu/ipmmu-vmsa: Fix return value check in ipmmu_find_group_dma()
iommu/vt-d: Clear pasid table entry when memory unbound
iommu/vt-d: Clear Page Request Overflow fault bit
iommu/vt-d: Missing checks for pasid tables if allocation fails
iommu/amd: Limit the IOVA page range to the specified addresses
...
Linus Torvalds [Wed, 15 Nov 2017 00:23:44 +0000 (16:23 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
updates.
There's no major behaviour change or additions to the core in all of
this, so the potential for regressions should be small (biggest
potential being in the scsi error handler changes)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: lpfc: Fix hard lock up NMI in els timeout handling.
scsi: mpt3sas: remove a stray KERN_INFO
scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event()
scsi: aacraid: use timespec64 instead of timeval
scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions
scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
scsi: mpt3sas: fix dma_addr_t casts
scsi: be2iscsi: Use kasprintf
scsi: storvsc: Avoid excessive host scan on controller change
scsi: lpfc: fix kzalloc-simple.cocci warnings
scsi: mpt3sas: Update mpt3sas driver version.
scsi: mpt3sas: Fix sparse warnings
scsi: mpt3sas: Fix nvme drives checking for tlr.
scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info
scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives.
scsi: mpt3sas: scan and add nvme device after controller reset
scsi: mpt3sas: Set NVMe device queue depth as 128
scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.
scsi: mpt3sas: API's to remove nvme drive from sml
scsi: mpt3sas: API 's to support NVMe drive addition to SML
...
Linus Torvalds [Wed, 15 Nov 2017 00:07:26 +0000 (16:07 -0800)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD update from Shaohua Li:
"This update mostly includes bug fixes:
- md-cluster now supports raid10 from Guoqing
- raid5 PPL fixes from Artur
- badblock regression fix from Bo
- suspend hang related fixes from Neil
- raid5 reshape fixes from Neil
- raid1 freeze deadlock fix from Nate
- memleak fixes from Zdenek
- bitmap related fixes from Me and Tao
- other fixes and cleanups"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (33 commits)
md: free unused memory after bitmap resize
md: release allocated bitset sync_set
md/bitmap: clear BITMAP_WRITE_ERROR bit before writing it to sb
md: be cautious about using ->curr_resync_completed for ->recovery_offset
badblocks: fix wrong return value in badblocks_set if badblocks are disabled
md: don't check MD_SB_CHANGE_CLEAN in md_allow_write
md-cluster: update document for raid10
md: remove redundant variable q
raid1: remove obsolete code in raid1_write_request
md-cluster: Use a small window for raid10 resync
md-cluster: Suspend writes in RAID10 if within range
md-cluster/raid10: set "do_balance = 0" if area is resyncing
md: use lockdep_assert_held
raid1: prevent freeze_array/wait_all_barriers deadlock
md: use TASK_IDLE instead of blocking signals
md: remove special meaning of ->quiesce(.., 2)
md: allow metadata update while suspending.
md: use mddev_suspend/resume instead of ->quiesce()
md: move suspend_hi/lo handling into core md code
md: don't call bitmap_create() while array is quiesced.
...
Linus Torvalds [Tue, 14 Nov 2017 23:50:56 +0000 (15:50 -0800)]
Merge tag 'for-4.15/dm' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- a few conversions from atomic_t to ref_count_t
- a DM core fix for a race during device destruction that could result
in a BUG_ON
- a stable@ fix for a DM cache race condition that could lead to data
corruption when operating in writeback mode (writethrough is default)
- various DM cache cleanups and improvements
- add DAX support to the DM log-writes target
- a fix for the DM zoned target's ability to deal with the last zone of
the drive being smaller than all others
- a stable@ DM crypt and DM integrity fix for a negative check that was
to restrictive (prevented slab debug with XFS ontop of DM crypt from
working)
- a DM raid target fix for a panic that can occur when forcing a raid
to sync
* tag 'for-4.15/dm' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (25 commits)
dm cache: lift common migration preparation code to alloc_migration()
dm cache: remove usused deferred_cells member from struct cache
dm cache policy smq: allocate cache blocks in order
dm cache policy smq: change max background work from 10240 to 4096 blocks
dm cache background tracker: limit amount of background work that may be issued at once
dm cache policy smq: take origin idle status into account when queuing writebacks
dm cache policy smq: handle races with queuing background_work
dm raid: fix panic when attempting to force a raid to sync
dm integrity: allow unaligned bv_offset
dm crypt: allow unaligned bv_offset
dm: small cleanup in dm_get_md()
dm: fix race between dm_get_from_kobject() and __dm_destroy()
dm: allocate struct mapped_device with kvzalloc
dm zoned: ignore last smaller runt zone
dm space map metadata: use ARRAY_SIZE
dm log writes: add support for DAX
dm log writes: add support for inline data buffers
dm cache: simplify get_per_bio_data() by removing data_size argument
dm cache: remove all obsolete writethrough-specific code
dm cache: submit writethrough writes in parallel to origin and cache
...
Linus Torvalds [Tue, 14 Nov 2017 23:32:19 +0000 (15:32 -0800)]
Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-block
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
Linus Torvalds [Tue, 14 Nov 2017 22:44:04 +0000 (14:44 -0800)]
Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs
Pull configfs updates from Christoph Hellwig:
"A couple of configfs cleanups:
- proper use of the bool type (Thomas Meyer)
- constification of struct config_item_type (Bhumika Goyal)"
* tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs:
RDMA/cma: make config_item_type const
stm class: make config_item_type const
ACPI: configfs: make config_item_type const
nvmet: make config_item_type const
usb: gadget: configfs: make config_item_type const
PCI: endpoint: make config_item_type const
iio: make function argument and some structures const
usb: gadget: make config_item_type structures const
dlm: make config_item_type const
netconsole: make config_item_type const
nullb: make config_item_type const
ocfs2/cluster: make config_item_type const
target: make config_item_type const
configfs: make ci_type field, some pointers and function arguments const
configfs: make config_item_type const
configfs: Fix bool initialization/comparison
Linus Torvalds [Tue, 14 Nov 2017 22:13:11 +0000 (14:13 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota, ext2, isofs and udf fixes from Jan Kara:
- two small quota error handling fixes
- two isofs fixes for architectures with signed char
- several udf block number overflow and signedness fixes
- ext2 rework of mount option handling to avoid GFP_KERNEL allocation
with spinlock held
- ... it also contains a patch to implement auditing of responses to
fanotify permission events. That should have been in the fanotify
pull request but I mistakenly merged that patch into a wrong branch
and noticed only now at which point I don't think it's worth rebasing
and redoing.
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: be aware of error from dquot_initialize
quota: fix potential infinite loop
isofs: use unsigned char types consistently
isofs: fix timestamps beyond 2027
udf: Fix some sign-conversion warnings
udf: Fix signed/unsigned format specifiers
udf: Fix 64-bit sign extension issues affecting blocks > 0x7FFFFFFF
udf: Remove some outdate references from documentation
udf: Avoid overflow when session starts at large offset
ext2: Fix possible sleep in atomic during mount option parsing
ext2: Parse mount options into a dedicated structure
audit: Record fanotify access control decisions
Linus Torvalds [Tue, 14 Nov 2017 22:08:20 +0000 (14:08 -0800)]
Merge branch 'fsnotify' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- fixes of use-after-tree issues when handling fanotify permission
events from Miklos
- refcount_t conversions from Elena
- fixes of ENOMEM handling in dnotify and fsnotify from me
* 'fsnotify' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: convert fsnotify_mark.refcnt from atomic_t to refcount_t
fanotify: clean up CONFIG_FANOTIFY_ACCESS_PERMISSIONS ifdefs
fsnotify: clean up fsnotify()
fanotify: fix fsnotify_prepare_user_wait() failure
fsnotify: fix pinning group in fsnotify_prepare_user_wait()
fsnotify: pin both inode and vfsmount mark
fsnotify: clean up fsnotify_prepare/finish_user_wait()
fsnotify: convert fsnotify_group.refcnt from atomic_t to refcount_t
fsnotify: Protect bail out path of fsnotify_add_mark_locked() properly
dnotify: Handle errors from fsnotify_add_mark_locked() in fcntl_dirnotify()
Linus Torvalds [Tue, 14 Nov 2017 22:06:51 +0000 (14:06 -0800)]
Merge tag 'dlm-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set focuses, as usual, on fixes to the comms layer.
New testing of the dlm with ocfs2 uncovered a number of bugs in the
TCP connection handling during recovery, starting, and stopping"
* tag 'dlm-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: remove dlm_send_rcom_lookup_dump
dlm: recheck kthread_should_stop() before schedule()
DLM: fix NULL pointer dereference in send_to_sock()
DLM: fix to reschedule rwork
DLM: fix to use sk_callback_lock correctly
DLM: fix overflow dlm_cb_seq
DLM: fix memory leak in tcp_accept_from_sock()
DLM: fix conversion deadlock when DLM_LKF_NODLCKWT flag is set
DLM: use CF_CLOSE flag to stop dlm_send correctly
DLM: Reanimate CF_WRITE_PENDING flag
DLM: fix race condition between dlm_recoverd_stop and dlm_recoverd
DLM: close othercon at send/receive error
DLM: retry rcom when dlm_wait_function is timed out.
DLM: fix to use sock_mutex correctly in xxx_accept_from_sock
DLM: fix race condition between dlm_send and dlm_recv
DLM: fix double list_del()
DLM: fix remove save_cb argument from add_sock()
DLM: Fix saving of NULL callbacks
DLM: Eliminate CF_WRITE_PENDING flag
DLM: Eliminate CF_CONNECT_PENDING flag
Linus Torvalds [Tue, 14 Nov 2017 21:55:51 +0000 (13:55 -0800)]
Merge tag 'gfs2-4.15.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've got a total of 17 GFS2 patches for this merge window. The
patches are basically in three categories: (1) patches related to
broken xfstest cases, (2) patches related to improving iomap and start
using it in GFS2, and (3) general typos and clarifications.
Please note that one of the iomap patches extends beyond GFS2 and
affects other file systems, but it was publically reviewed by a
variety of file system people in the community.
From Andreas Gruenbacher:
- rename variable 'bsize' to 'factor' to clarify the logic related to
gfs2_block_map.
- correctly set ctime in the setflags ioctl, which fixes broken
xfstests test 277.
- fix broken xfstest 258, due to an atime initialization problem.
- fix broken xfstest 307, in which GFS2 was not setting ctime when
setting acls.
- switch general iomap code from blkno to disk offset for a variety
of file systems.
- add a new IOMAP_F_DATA_INLINE flag for iomap to indicate blocks
that have data mixed with metadata.
- implement SEEK_HOLE and SEEK_DATA via iomap in GFS2.
- fix failing xfstest case 066, which was due to not properly syncing
dirty inodes when changing extended attributes.
- fix a minor typo in a comment.
- partially fix xfstest 424, which involved GET_FLAGS and SET_FLAGS
ioctl. This is also a cleanup and simplification of the translation
of flags from fs flags to gfs2 flags.
- add support for STATX_ATTR_ in statx, which fixed broken xfstest
424.
- fix for failing xfstest 093 which fixes a recursive glock problem
with gfs2_xattr_get and _set
From me:
- make inode height info part of the 'metapath' data structure to
facilitate using iomap in GFS2.
- start using iomap inside GFS2 and switch GFS2's block_map functions
to use iomap under the covers.
- switch GFS2's fiemap implementation from using block_map to using
iomap under the covers.
- fix journaled data pages not being properly synced to media when
writing inodes. This was caught with xfstests.
- fix another failing xfstest case in which switching a file from
ordered_write to journaled data via set_flags caused a deadlock"
* tag 'gfs2-4.15.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Allow gfs2_xattr_set to be called with the glock held
gfs2: Add support for statx inode flags
gfs2: Fix and clean up {GET,SET}FLAGS ioctl
gfs2: Fix a harmless typo
gfs2: Fix xattr fsync
GFS2: Take inode off order_write list when setting jdata flag
GFS2: flush the log and all pages for jdata as we do for WB_SYNC_ALL
gfs2: Implement SEEK_HOLE / SEEK_DATA via iomap
GFS2: Switch fiemap implementation to use iomap
GFS2: Implement iomap for block_map
GFS2: Make height info part of metapath
gfs2: Always update inode ctime in set_acl
gfs2: Support negative atimes
gfs2: Update ctime in setflags ioctl
gfs2: Clarify gfs2_block_map
Linus Torvalds [Tue, 14 Nov 2017 21:53:18 +0000 (13:53 -0800)]
Merge tag 'jfs-4.15' of git://github.com/kleikamp/linux-shaggy
Pull jfs updates from David Kleikamp:
"A couple small fixes for jfs"
* tag 'jfs-4.15' of git://github.com/kleikamp/linux-shaggy:
jfs: Add missing NULL pointer check in __get_metapage
jfs: remove increment of i_version counter
Linus Torvalds [Tue, 14 Nov 2017 21:35:29 +0000 (13:35 -0800)]
Merge branch 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"There are some new user features and the usual load of invisible
enhancements or cleanups.
New features:
- extend mount options to specify zlib compression level, -o
compress=zlib:9
- v2 of ioctl "extent to inode mapping", addressing a usecase where
we want to retrieve more but inaccurate results and do the
postprocessing in userspace, aiding defragmentation or
deduplication tools
- populate compression heuristics logic, do data sampling and try to
guess compressibility by: looking for repeated patterns, counting
unique byte values and distribution, calculating Shannon entropy;
this will need more benchmarking and possibly fine tuning, but the
base should be good enough
- enable indexing for btrfs as lower filesystem in overlayfs
- speedup page cache readahead during send on large files
Internal enhancements:
- more sanity checks of b-tree items when reading them from disk
- more EINVAL/EUCLEAN fixups, missing BLK_STS_* conversion, other
errno or error handling fixes
- remove some homegrown IO-related logic, that's been obsoleted by
core block layer changes (batching, plug/unplug, own counters)
- simplify code handling outstanding extents, make it more clear
where and how the accounting is done
- make delalloc reservations per-inode, simplify the code and make
the logic more straightforward
- extensive cleanup of delayed refs code
Notable fixes:
- fix send ioctl on 32bit with 64bit kernel"
* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (102 commits)
btrfs: Fix bug for misused dev_t when lookup in dev state hash table.
Btrfs: heuristic: add Shannon entropy calculation
Btrfs: heuristic: add byte core set calculation
Btrfs: heuristic: add byte set calculation
Btrfs: heuristic: add detection of repeated data patterns
Btrfs: heuristic: implement sampling logic
Btrfs: heuristic: add bucket and sample counters and other defines
Btrfs: compression: separate heuristic/compression workspaces
btrfs: move btrfs_truncate_block out of trans handle
btrfs: don't call btrfs_start_delalloc_roots in flushoncommit
btrfs: track refs in a rb_tree instead of a list
btrfs: add a comp_refs() helper
btrfs: switch args for comp_*_refs
btrfs: make the delalloc block rsv per inode
btrfs: add tracepoints for outstanding extents mods
Btrfs: rework outstanding_extents
btrfs: increase output size for LOGICAL_INO_V2 ioctl
btrfs: add a flags argument to LOGICAL_INO and call it LOGICAL_INO_V2
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents
btrfs: send: remove unused code
...
Linus Torvalds [Tue, 14 Nov 2017 21:15:12 +0000 (13:15 -0800)]
Merge tag 'xfs-4.15-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"xfs: great scads of new stuff for 4.15.
This merge cycle, we're making some substantive changes to XFS. The
in-core extent mappings have been refactored to use proper iterators
and a btree to handle heavily fragmented files without needing
high-order memory allocations; some important log recovery bug fixes;
and the first part of the online fsck functionality.
(The online fsck feature is disabled by default and more pieces of it
will be coming in future release cycles.)
This giant pile of patches has been run through a full xfstests run
over the weekend and through a quick xfstests run against this
morning's master, with no major failures reported.
New in this version:
- Refactor the incore extent map manipulations to use a cursor
instead of directly modifying extent data.
- Refactor the incore extent map cursor to use an in-memory btree
instead of a single high-order allocation. This eliminates a major
source of complaints about insufficient memory when opening a
heavily fragmented file into a system whose memory is also heavily
fragmented.
- Fix a longstanding bug where deleting a file with a complex
extended attribute btree incorrectly handled memory pointers, which
could lead to memory corruption.
- Improve metadata validation to eliminate crashing problems found
while fuzzing xfs.
- Move the error injection tag definitions into libxfs to be shared
with userspace components.
- Fix some log recovery bugs where we'd underflow log block position
vector and incorrectly fail log recovery.
- Drain the buffer lru after log recovery to force recovered buffers
back through the verifiers after mount. On a v4 filesystem the log
never attaches verifiers during log replay (v5 does), so we could
end up with buffers marked verified but without having ever been
verified.
- Fix various other bugs.
- Introduce the first part of a new online fsck tool. The new fsck
tool will be able to iterate every piece of metadata in the
filesystem to look for obvious errors and corruptions. In the next
release cycle the checking will be extended to cross-reference with
the other fs metadata, so this feature should only be used by the
developers in the mean time"
* tag 'xfs-4.15-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (131 commits)
xfs: on failed mount, force-reclaim inodes after unmounting quota controls
xfs: check the uniqueness of the AGFL entries
xfs: remove u_int* type usage
xfs: handle zero entries case in xfs_iext_rebalance_leaf
xfs: add comments documenting the rebalance algorithm
xfs: trivial indentation fixup for xfs_iext_remove_node
xfs: remove a superflous assignment in xfs_iext_remove_node
xfs: add some comments to xfs_iext_insert/xfs_iext_insert_node
xfs: fix number of records handling in xfs_iext_split_leaf
fs/xfs: Remove NULL check before kmem_cache_destroy
xfs: only check da node header padding on v5 filesystems
xfs: fix btree scrub deref check
xfs: fix uninitialized return values in scrub code
xfs: pass inode number to xfs_scrub_ino_set_{preen,warning}
xfs: refactor the directory data block bestfree checks
xfs: mark xlog_verify_dest_ptr STATIC
xfs: mark xlog_recover_check_summary STATIC
xfs: mark xfs_btree_check_lblock and xfs_btree_check_ptr static
xfs: remove unreachable error injection code in xfs_qm_dqget
xfs: remove unused debug counts for xfs_lock_inodes
...
Linus Torvalds [Tue, 14 Nov 2017 20:59:42 +0000 (12:59 -0800)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- Add support for online resizing of file systems with bigalloc
- Fix a two data corruption bugs involving DAX, as well as a corruption
bug after a crash during a racing fallocate and delayed allocation.
- Finally, a number of cleanups and optimizations.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve smp scalability for inode generation
ext4: add support for online resizing with bigalloc
ext4: mention noload when recovering on read-only device
Documentation: fix little inconsistencies
ext4: convert timers to use timer_setup()
jbd2: convert timers to use timer_setup()
ext4: remove duplicate extended attributes defs
ext4: add ext4_should_use_dax()
ext4: add sanity check for encryption + DAX
ext4: prevent data corruption with journaling + DAX
ext4: prevent data corruption with inline data + DAX
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ext4: retry allocations conservatively
ext4: Switch to iomap for SEEK_HOLE / SEEK_DATA
ext4: Add iomap support for inline data
iomap: Add IOMAP_F_DATA_INLINE flag
iomap: Switch from blkno to disk offset
Linus Torvalds [Tue, 14 Nov 2017 19:35:15 +0000 (11:35 -0800)]
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Lots of cleanups, mostly courtesy by Eric Biggers"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: lock mutex before checking for bounce page pool
fscrypt: add a documentation file for filesystem-level encryption
ext4: switch to fscrypt_prepare_setattr()
ext4: switch to fscrypt_prepare_lookup()
ext4: switch to fscrypt_prepare_rename()
ext4: switch to fscrypt_prepare_link()
ext4: switch to fscrypt_file_open()
fscrypt: new helper function - fscrypt_prepare_setattr()
fscrypt: new helper function - fscrypt_prepare_lookup()
fscrypt: new helper function - fscrypt_prepare_rename()
fscrypt: new helper function - fscrypt_prepare_link()
fscrypt: new helper function - fscrypt_file_open()
fscrypt: new helper function - fscrypt_require_key()
fscrypt: remove unneeded empty fscrypt_operations structs
fscrypt: remove ->is_encrypted()
fscrypt: switch from ->is_encrypted() to IS_ENCRYPTED()
fs, fscrypt: add an S_ENCRYPTED inode flag
fscrypt: clean up include file mess
Linus Torvalds [Tue, 14 Nov 2017 18:52:09 +0000 (10:52 -0800)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
Linus Torvalds [Tue, 14 Nov 2017 05:14:07 +0000 (21:14 -0800)]
Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver updates for 4.15-rc1.
There is the usual amount of gadget and xhci driver updates, along
with phy and chipidea enhancements. There's also a lot of SPDX tags
and license boilerplate cleanups as well, which provide some churn in
the diffstat.
Other major thing is the typec code that moved out of staging and into
the "real" part of the drivers/usb/ tree, which was nice to see
happen.
All of these have been in linux-next with no reported issues for a
while"
* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
USB: usbfs: compute urb->actual_length for isochronous
usb: core: message: remember to reset 'ret' to 0 when necessary
USB: typec: Remove remaining redundant license text
USB: typec: add SPDX identifiers to some files
USB: renesas_usbhs: rcar?.h: add SPDX tags
USB: chipidea: ci_hdrc_tegra.c: add SPDX line
USB: host: xhci-debugfs: add SPDX lines
USB: add SPDX identifiers to all remaining Makefiles
usb: host: isp1362-hcd: remove a couple of redundant assignments
USB: adutux: remove redundant variable minor
usb: core: add a new usb_get_ptm_status() helper
usb: core: add a 'type' parameter to usb_get_status()
usb: core: introduce a new usb_get_std_status() helper
usb: core: rename usb_get_status() 'type' argument to 'recip'
usb: core: add Status Type definitions
USB: gadget: Remove redundant license text
USB: gadget: function: Remove redundant license text
USB: gadget: udc: Remove redundant license text
USB: gadget: legacy: Remove redundant license text
...
Linus Torvalds [Tue, 14 Nov 2017 05:05:31 +0000 (21:05 -0800)]
Merge tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big tty/serial driver pull request for 4.15-rc1.
Lots of serial driver updates in here, some small vt cleanups, and a
raft of SPDX and license boilerplate cleanups, messing up the diffstat
a bit.
Nothing major, with no realy functional changes except better hardware
support for some platforms.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits)
tty: ehv_bytechan: fix spelling mistake
tty: serial: meson: allow baud-rates lower than 9600
serial: 8250_fintek: Fix crash with baud rate B0
serial: 8250_fintek: Disable delays for ports != 0
serial: 8250_fintek: Return -EINVAL on invalid configuration
tty: Remove redundant license text
tty: serdev: Remove redundant license text
tty: hvc: Remove redundant license text
tty: serial: Remove redundant license text
tty: add SPDX identifiers to all remaining files in drivers/tty/
tty: serial: jsm: remove redundant pointer ts
tty: serial: jsm: add space before the open parenthesis '('
tty: serial: jsm: fix coding style
tty: serial: jsm: delete space between function name and '('
tty: serial: jsm: add blank line after declarations
tty: serial: jsm: change the type of local variable
tty: serial: imx: remove dead code imx_dma_rxint
tty: serial: imx: disable ageing timer interrupt if dma in use
serial: 8250: fix potential deadlock in rs485-mode
serial: m32r_sio: Drop redundant .data assignment
...
Linus Torvalds [Tue, 14 Nov 2017 04:53:28 +0000 (20:53 -0800)]
Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd
atomisp cleanups (take the media tree's version)"
* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
Linus Torvalds [Tue, 14 Nov 2017 04:36:37 +0000 (20:36 -0800)]
Merge tag 'devprop-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These make the fwnode_handle_get() function return a pointer to the
target fwnode object, which reflects the of_node_get() behavior, and
add a macro for iterating over graph endpoints (Sakari Ailus)"
* tag 'devprop-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Add a macro for interating over graph endpoints
device property: Make fwnode_handle_get() return the fwnode
projects / kernel.git / log