Stephen Boyd [Tue, 16 Feb 2021 22:09:24 +0000 (14:09 -0800)]
Merge branches 'clk-socfpga', 'clk-mstar', 'clk-qcom' and 'clk-warnings' into clk-next
- PLL support on MStar/SigmaStar ARMv7 SoCs
- CPU clks for Qualcomm SDX55
- GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
- GCC clks for Qualcomm SM8350
- Video clk fixups on Qualcomm SM8250
- GPU clks for Qualcomm SDM660/SDM630
- Improvements for multimedia clks on Qualcomm MSM8998
- Fix many warnings with W=1 enabled builds under drivers/clk/
* clk-socfpga:
clk: socfpga: agilex: add clock driver for eASIC N5X platform
dt-bindings: documentation: add clock bindings information for eASIC N5X
Stephen Boyd [Tue, 16 Feb 2021 22:09:08 +0000 (14:09 -0800)]
Merge branches 'clk-mediatek', 'clk-imx', 'clk-amlogic' and 'clk-at91' into clk-next
* clk-mediatek:
clk: mediatek: mux: Update parent at enable time
clk: mediatek: mux: Drop unused clock ops
clk: mediatek: Select all the MT8183 clocks by default
* clk-imx:
dt-bindings: clock: imx: Switch to my personal address
MAINTAINERS: Add section for NXP i.MX clock drivers
clk: imx: Move 'imx6sl_set_wait_clk()'s prototype out to accessible header
clk: imx8mn: add clkout1/2 support
clk: imx8mm: add clkout1/2 support
clk: imx8mq: add PLL monitor output
clk: imx: clk-imx31: Remove unused static const table 'uart_clks'
clk: imx6q: demote warning about pre-boot ldb_di_clk reparenting
clk: imx: clk-imx8qxp: Add some SCU clocks support for MIPI-LVDS subsystems
clk: imx: clk-imx8qxp: Register DC0 display clocks with imx_clk_scu2()
clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 bypass clocks
clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 PLL clocks
* clk-amlogic:
clk: meson: axg: Remove MIPI enable clock gate
clk: meson-axg: remove CLKID_MIPI_ENABLE
dt-bindings: clock: meson8b: remove non-existing clock macros
clk: meson: meson8b: remove compatibility code for old .dtbs
clk: meson: clk-pll: propagate the error from meson_clk_pll_set_rate()
clk: meson: clk-pll: make "ret" a signed integer
clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL
* clk-at91:
clk: at91: Fix the declaration of the clocks
* clk-allwinner:
clk: sunxi-ng: Add support for the Allwinner H616 CCU
clk: sunxi-ng: Add support for the Allwinner H616 R-CCU
dt-bindings: clk: sunxi-ccu: Add compatible string for Allwinner H616
clk: sunxi-ng: h6: Fix clock divider range on some clocks
clk: sunxi: clk-mod0: Demote non-conformant kernel-doc header
clk: sunxi: clk-a10-ve: Demote obvious kernel-doc abuse
clk: sunxi: clk-sunxi: Demote a bunch of non-conformant kernel-doc headers
clk: sunxi-ng: h6: Fix CEC clock
clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset
* clk-rockchip:
clk: rockchip: fix DPHY gate locations on rk3368
clk: rockchip: use clock id for SCLK_VIP_OUT on rk3368
clk: rockchip: add clock id for SCLK_VIP_OUT on rk3368
clk: rockchip: use clock ids for PCLK_DPHYRX and PCLK_DPHYTX0 on rk3368
clk: rockchip: add clock ids for PCLK_DPHYRX and PCLK_DPHYTX0 on rk3368
clk: rockchip: Demote non-conformant kernel-doc header in half-divider
clk: rockchip: Demote kernel-doc abuses to standard comment blocks in plls
clk: rockchip: Remove unused/undocumented struct members from clk-cpu
clk: rockchip: Demote non-conformant kernel-doc headers in main clock code
* clk-xilinx:
clk: xilinx: move xlnx_vcu clock driver from soc
soc: xilinx: vcu: fix alignment to open parenthesis
soc: xilinx: vcu: fix repeated word the in comment
soc: xilinx: vcu: use bitfields for register definition
soc: xilinx: vcu: remove calculation of PLL configuration
soc: xilinx: vcu: make the PLL configurable
soc: xilinx: vcu: make pll post divider explicit
soc: xilinx: vcu: implement clock provider for output clocks
soc: xilinx: vcu: register PLL as fixed rate clock
soc: xilinx: vcu: implement PLL disable
soc: xilinx: vcu: add helpers for configuring PLL
soc: xilinx: vcu: add helper to wait for PLL locked
soc: xilinx: vcu: drop coreclk from struct xlnx_vcu
clk: divider: fix initialization with parent_hw
ARM: dts: vcu: define indexes for output clocks
clk: axi-clkgen: use devm_platform_ioremap_resource() short-hand
dt-bindings: clock: adi,axi-clkgen: add compatible string for ZynqMP support
clk: clk-axiclkgen: add ZynqMP PFD and VCO limits
clk: axi-clkgen: replace ARCH dependencies with driver deps
Taniya Das [Wed, 10 Feb 2021 18:26:19 +0000 (23:56 +0530)]
clk: qcom: Add Global Clock controller (GCC) driver for SC7280
Add support for the global clock controller found on SC7280
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.
clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
In the previous commit ("clk: qcom: rcg2: Stop hardcoding gfx3d pingpong
parent numbers") the gfx3d ping-pong ops (clk_gfx3d_ops) were
generalized in order to be able to reuse the same ops for more than just
one clock for one SoC: follow the change here in the MSM8996 MMCC.
The function clk_gfx3d_determine_rate is selecting different PLLs
to manage the GFX3D clock source in a special way: this one needs
to be ping-pong'ed on different PLLs to ensure stability during
frequency switching (set a PLL rate, let it stabilize, switch the
RCG to the new PLL) and fast frequency transitions.
This technique is currently being used in the MSM8996 SoC and the
function was assuming that the parents were always at a specific
index in the parents list, which is TRUE, if we use this only on
the MSM8996 MMCC.
Unfortunately, MSM8996 is not the only SoC that needs to ping-pong
the graphics RCG, so choices are:
1. Make new special ops just to hardcode *again* other indexes,
creating code duplication for (imo) no reason; or
2. Generalize this function, so that it becomes usable for a range
of SoCs with slightly different ping-pong configuration.
In this commit, the second road was taken: define a new "special"
struct clk_rcg2_gfx3d, containing the ordered list of parents to
ping-pong the graphics clock on, and the "regular" rcg2 clock
structure in order to generalize the clk_gfx3d_determine_rate
function and make it working for other SoCs.
As for the function itself it is left with the assumption that we
need to ping-pong over three parents. The reasons for this are:
1. The initial model was MSM8996, which has 3 parents for the
graphics clock pingpong;
2. The other example that was taken into consideration is the
SDM630/636/660 SoC gpu clock controller, which is ping-ponging
over two dynamic clocked and one fixed clock PLL.
Add a driver for the multimedia clock controller found on SDM660
based devices. This should allow most multimedia device drivers
to probe and control their clocks.
Signed-off-by: Martin Botka <martin.botka@somainline.org> Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[angelogioacchino.delregno@somainline.org: Cleaned up SDM630 clock fixups] Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210113183817.447866-4-angelogioacchino.delregno@somainline.org
[sboyd@kernel.org: Silence NULL pointer sparse warnings] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
This clock is critical for any access to the GPU: gating it will
crash the system when the GPU has been initialized (so, you cannot
gate it unless you deinit the Adreno completely).
So, to achieve a working state with GPU on, set the CLK_IS_CRITICAL
flag to this clock.
The GPU PLL0 is not a fixed PLL and the rate can be set on it:
this is necessary especially on boards which bootloader is setting
a very low rate on this PLL before booting Linux, which would be
unsuitable for postdividing to reach the maximum allowed Adreno GPU
frequency of 710MHz (or, actually, even 670MHz..) on this SoC.
To allow setting rates on the GPU PLL0, also define VCO boundaries
and set the CLK_SET_RATE_PARENT flag to the GPU PLL0 postdivider.
With this change, the Adreno GPU is now able to scale through all
the available frequencies.
clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
The GPU GX GDSC has GPU_GX_BCR reset and gfx3d_clk CXC, as stated
on downstream kernels (and as verified upstream, because otherwise
random lockups happen).
Also, add PWRSTS_RET and NO_RET_PERIPH: also as found downstream,
and also as verified here, to avoid GPU related lockups it is
necessary to force retain mem, but *not* peripheral when enabling
this GDSC (and, of course, the inverse on disablement).
With this change, the GPU finally works flawlessly on my four
different MSM8998 devices from two different manufacturers.
In some rare occasions, we want to only set the RETAIN_MEM bit, but
not the RETAIN_PERIPH one: this is seen on at least SDM630/636/660's
GPU-GX GDSC, where unsetting and setting back the RETAIN_PERIPH bit
will generate chaos and panics during GPU suspend time (mainly, the
chaos is unaligned access).
For this reason, introduce a new NO_RET_PERIPH flag to the GDSC
driver to address this corner case.
Daniel Palmer [Thu, 11 Feb 2021 05:22:03 +0000 (14:22 +0900)]
clk: mstar: MStar/SigmaStar MPLL driver
This adds a basic driver for the MPLL block found in MStar/SigmaStar
ARMv7 SoCs.
Currently this driver is only good for calculating the rates of it's
outputs and the actual configuration must be done before the kernel
boots. Usually this is done even before u-boot starts.
This driver targets the MPLL block found in the MSC313/MSC313E but
there is no documentation this chip so the register descriptions for
the another MStar chip the MST786 were used as they seem to match.
Daniel Palmer [Thu, 11 Feb 2021 05:22:02 +0000 (14:22 +0900)]
clk: fixed: add devm helper for clk_hw_register_fixed_factor()
Add a devm helper for clk_hw_register_fixed_factor() so that drivers that internally
register fixed factor clocks for things like dividers don't need to manually unregister
them on remove or if probe fails.
Dinh Nguyen [Fri, 12 Feb 2021 14:30:59 +0000 (08:30 -0600)]
clk: socfpga: agilex: add clock driver for eASIC N5X platform
Add support for Intel's eASIC N5X platform. The clock manager driver for
the N5X is very similar to the Agilex platform, we can re-use most of
the Agilex clock driver.
This patch makes the necessary changes for the driver to differentiate
between the Agilex and the N5X platforms.
Dinh Nguyen [Fri, 12 Feb 2021 14:30:58 +0000 (08:30 -0600)]
dt-bindings: documentation: add clock bindings information for eASIC N5X
Document the Agilex clock bindings, and add the clock header file. The
clock header is an enumeration of all the different clocks on the eASIC
N5X platform.
Matti Vaittinen [Tue, 5 Jan 2021 12:47:54 +0000 (14:47 +0200)]
clk: BD718x7: Do not depend on parent driver data
The bd718x7 only needs a regmap from parent device. This can be
obtained by call to dev_get_regmap. Do not require parent to
populate the driver data for this.
Saeed Nowshadi [Fri, 5 Feb 2021 03:35:04 +0000 (19:35 -0800)]
clk: si570: Skip NVM to RAM recall operation if an optional property is set
Recalling NVM data into RAM during probe() initiates a re-calibration of
the clock. If the clock is already in-use, the recall operation can cause
a glitch on the frequency out. At power on, the factory data are loaded
from NVM into RAM by default. If the clock frequency has been changed
since power on, the recall operation can be used to re-initialize the clock
to factory setting.
Adam Ford [Sun, 7 Feb 2021 18:51:39 +0000 (12:51 -0600)]
clk: vc5: Add support for optional load capacitance
There are two registers which can set the load capacitance for
XTAL1 and XTAL2. These are optional registers when using an
external crystal. Parse the device tree and set the
corresponding registers accordingly.
There are two registers which can set the load capacitance for
XTAL1 and XTAL2. These are optional registers when using an
external crystal. Since XTAL1 and XTAL2 will set to the same value,
update the binding to support a single property called
xtal-load-femtofarads.
Lee Jones [Wed, 20 Jan 2021 09:30:40 +0000 (09:30 +0000)]
clk: zynq: clkc: Remove various instances of an unused variable 'clk'
Fixes the following W=1 kernel build warning(s):
drivers/clk/zynq/clkc.c: In function ‘zynq_clk_register_fclk’:
drivers/clk/zynq/clkc.c:106:14: warning: variable ‘clk’ set but not used [-Wunused-but-set-variable]
drivers/clk/zynq/clkc.c: In function ‘zynq_clk_register_periph_clk’:
drivers/clk/zynq/clkc.c:179:14: warning: variable ‘clk’ set but not used [-Wunused-but-set-variable]
drivers/clk/zynq/clkc.c: In function ‘zynq_clk_setup’:
drivers/clk/zynq/clkc.c:220:14: warning: variable ‘clk’ set but not used [-Wunused-but-set-variable]
Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-21-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Also demote non-worthy header to standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/clk/versatile/clk-icst.c:53: warning: Function parameter or member 'map' not described in 'clk_icst'
drivers/clk/versatile/clk-icst.c:53: warning: Function parameter or member 'vcoreg_off' not described in 'clk_icst'
drivers/clk/versatile/clk-icst.c:53: warning: Function parameter or member 'lockreg_off' not described in 'clk_icst'
drivers/clk/versatile/clk-icst.c:435: warning: cannot understand function prototype: 'const struct icst_params icst525_apcp_cm_params = '
Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-20-lee.jones@linaro.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Wed, 20 Jan 2021 09:30:36 +0000 (09:30 +0000)]
clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
Fixes the following W=1 kernel build warning(s):
drivers/clk/ti/gate.c:67: warning: Function parameter or member 'hw' not described in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
drivers/clk/ti/gate.c:67: warning: Excess function parameter 'clk' description in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
Cc: Tero Kristo <kristo@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-omap@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-17-lee.jones@linaro.org Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Wed, 20 Jan 2021 09:30:35 +0000 (09:30 +0000)]
clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter
Fixes the following W=1 kernel build warning(s):
drivers/clk/ti/dpll.c:163: warning: Function parameter or member 'user' not described in '_register_dpll'
drivers/clk/ti/dpll.c:163: warning: Excess function parameter 'hw' description in '_register_dpll'
Cc: Tero Kristo <kristo@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-omap@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-16-lee.jones@linaro.org Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Wed, 20 Jan 2021 09:30:33 +0000 (09:30 +0000)]
clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param
Fixes the following W=1 kernel build warning(s):
drivers/clk/ti/clockdomain.c:107: warning: Function parameter or member 'hw' not described in 'omap2_init_clk_clkdm'
drivers/clk/ti/clockdomain.c:107: warning: Excess function parameter 'clk' description in 'omap2_init_clk_clkdm'
Cc: Tero Kristo <kristo@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-omap@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-14-lee.jones@linaro.org Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
drivers/clk/st/clkgen-fsyn.c:186: warning: Function parameter or member 'data' not described in 'st_clk_quadfs_pll'
drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'regs_base' not described in 'st_clk_quadfs_fsynth'
drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'lock' not described in 'st_clk_quadfs_fsynth'
drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'data' not described in 'st_clk_quadfs_fsynth'
drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'chan' not described in 'st_clk_quadfs_fsynth'
drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'md' not described in 'st_clk_quadfs_fsynth'
drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'pe' not described in 'st_clk_quadfs_fsynth'
drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'sdiv' not described in 'st_clk_quadfs_fsynth'
Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Stephen Gallimore <stephen.gallimore@st.com> Cc: Pankaj Dev <pankaj.dev@st.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-13-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
drivers/clk/st/clkgen-pll.c:142: warning: cannot understand function prototype: 'struct clkgen_pll '
Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Stephen Gallimore <stephen.gallimore@st.com> Cc: Pankaj Dev <pankaj.dev@st.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-12-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_state_reg' not described in 'cpu_dfs_regs'
drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'divider_mask' not described in 'cpu_dfs_regs'
drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'cluster_offset' not described in 'cpu_dfs_regs'
drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'force_mask' not described in 'cpu_dfs_regs'
drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'divider_offset' not described in 'cpu_dfs_regs'
drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'divider_ratio' not described in 'cpu_dfs_regs'
drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_offset' not described in 'cpu_dfs_regs'
drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_state_offset' not described in 'cpu_dfs_regs'
drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_state_cluster_offset' not described in 'cpu_dfs_regs'
Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Cc: Omri Itach <omrii@marvell.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-10-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Wed, 20 Jan 2021 09:30:28 +0000 (09:30 +0000)]
clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc'
Fixes the following W=1 kernel build warning(s):
drivers/clk/socfpga/clk-pll-a10.c: In function ‘__socfpga_pll_init’:
drivers/clk/socfpga/clk-pll-a10.c:76:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-9-lee.jones@linaro.org Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
drivers/clk/socfpga/clk-pll.c: In function ‘__socfpga_pll_init’:
drivers/clk/socfpga/clk-pll.c:83:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-8-lee.jones@linaro.org Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Wed, 20 Jan 2021 09:30:26 +0000 (09:30 +0000)]
clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used
Fixes the following W=1 kernel build warning(s):
drivers/clk/sifive/fu540-prci.h:16:35: warning: ‘prci_clk_fu540’ defined but not used [-Wunused-const-variable=]
drivers/clk/sifive/fu540-prci.h:16:35: warning: ‘prci_clk_fu540’ defined but not used [-Wunused-const-variable=]
Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Pragnesh Patel <Pragnesh.patel@sifive.com> Cc: Zong Li <zong.li@sifive.com> Cc: linux-clk@vger.kernel.org Cc: linux-riscv@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-7-lee.jones@linaro.org Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Wed, 20 Jan 2021 09:30:25 +0000 (09:30 +0000)]
clk: bcm: clk-iproc-pll: Demote kernel-doc abuse
Fixes the following W=1 kernel build warning(s):
drivers/clk/bcm/clk-iproc-pll.c:712: warning: Function parameter or member 'pll' not described in 'iproc_pll_sw_cfg'
Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-6-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Tue, 26 Jan 2021 12:45:40 +0000 (12:45 +0000)]
clk: zynqmp: divider: Add missing description for 'max_div'
Fixes the following W=1 kernel build warning(s):
drivers/clk/zynqmp/divider.c:46: warning: Function parameter or member 'max_div' not described in 'zynqmp_clk_divider'
Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Rajan Vaja <rajan.vaja@xilinx.com> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-22-lee.jones@linaro.org Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Tue, 26 Jan 2021 12:45:38 +0000 (12:45 +0000)]
clk: spear: Move prototype to accessible header
Fixes the following W=1 kernel build warning(s):
drivers/clk/spear/spear1310_clock.c:385:13: warning: no previous prototype for ‘spear1310_clk_init’ [-Wmissing-prototypes]
drivers/clk/spear/spear1340_clock.c:442:13: warning: no previous prototype for ‘spear1340_clk_init’ [-Wmissing-prototypes]
Cc: Viresh Kumar <vireshk@kernel.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-20-lee.jones@linaro.org Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Tue, 26 Jan 2021 12:45:36 +0000 (12:45 +0000)]
clk: clk-xgene: Add description for 'mask' and fix formatting for 'flags'
Fixes the following W=1 kernel build warning(s):
drivers/clk/clk-xgene.c:229: warning: Function parameter or member 'mask' not described in 'xgene_clk_pmd'
drivers/clk/clk-xgene.c:229: warning: Function parameter or member 'flags' not described in 'xgene_clk_pmd'
Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Loc Ho <lho@apm.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-18-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
drivers/clk/qcom/mmcc-msm8974.c:85:27: warning: ‘mmcc_xo_mmpll0_1_2_gpll0’ defined but not used [-Wunused-const-variable=]
drivers/clk/qcom/mmcc-msm8974.c:77:32: warning: ‘mmcc_xo_mmpll0_1_2_gpll0_map’ defined but not used [-Wunused-const-variable=]
Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-17-lee.jones@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Tue, 26 Jan 2021 12:45:34 +0000 (12:45 +0000)]
clk: clk-npcm7xx: Remove unused static const tables 'npcm7xx_gates' and 'npcm7xx_divs_fx'
Fixes the following W=1 kernel build warning(s):
drivers/clk/clk-npcm7xx.c:438:43: warning: ‘npcm7xx_gates’ defined but not used [-Wunused-const-variable=]
drivers/clk/clk-npcm7xx.c:365:48: warning: ‘npcm7xx_divs_fx’ defined but not used [-Wunused-const-variable=]
Cc: Avi Fishman <avifishman70@gmail.com> Cc: Tomer Maimon <tmaimon77@gmail.com> Cc: Tali Perry <tali.perry1@gmail.com> Cc: Patrick Venture <venture@google.com> Cc: Nancy Yuen <yuenn@google.com> Cc: Benjamin Fair <benjaminfair@google.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Nuvoton Technologies <tali.perry@nuvoton.com> Cc: openbmc@lists.ozlabs.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-16-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
drivers/clk/clk-fixed-mmio.c:62: warning: Function parameter or member 'pdev' not described in 'of_fixed_mmio_clk_probe'
Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Jan Kotas <jank@cadence.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-15-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
drivers/clk/qcom/gcc-ipq4019.c: In function ‘clk_cpu_div_set_rate’:
drivers/clk/qcom/gcc-ipq4019.c:1279:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-14-lee.jones@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Tue, 26 Jan 2021 12:45:29 +0000 (12:45 +0000)]
clk: ti: dpll44xx: Fix some potential doc-rot
Fixes the following W=1 kernel build warning(s):
drivers/clk/ti/dpll44xx.c:114: warning: Function parameter or member 'hw' not described in 'omap4_dpll_regm4xen_recalc'
drivers/clk/ti/dpll44xx.c:114: warning: Function parameter or member 'parent_rate' not described in 'omap4_dpll_regm4xen_recalc'
drivers/clk/ti/dpll44xx.c:114: warning: Excess function parameter 'clk' description in 'omap4_dpll_regm4xen_recalc'
drivers/clk/ti/dpll44xx.c:150: warning: Function parameter or member 'hw' not described in 'omap4_dpll_regm4xen_round_rate'
drivers/clk/ti/dpll44xx.c:150: warning: Function parameter or member 'parent_rate' not described in 'omap4_dpll_regm4xen_round_rate'
drivers/clk/ti/dpll44xx.c:150: warning: Excess function parameter 'clk' description in 'omap4_dpll_regm4xen_round_rate'
Cc: Tero Kristo <kristo@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-omap@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-11-lee.jones@linaro.org Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Tue, 26 Jan 2021 12:45:28 +0000 (12:45 +0000)]
clk: tegra: cvb: Provide missing description for 'tegra_cvb_add_opp_table()'s align param
Fixes the following W=1 kernel build warning(s):
drivers/clk/tegra/cvb.c:106: warning: Function parameter or member 'align' not described in 'tegra_cvb_add_opp_table'
Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-clk@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-10-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
drivers/clk/tegra/clk-tegra30.c: In function ‘tegra30_enable_cpu_clock’:
drivers/clk/tegra/clk-tegra30.c:1107:15: warning: variable ‘reg’ set but not used [-Wunused-but-set-variable]
Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-clk@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-8-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Tue, 26 Jan 2021 12:45:22 +0000 (12:45 +0000)]
clk: ti: dpll3xxx: Fix some kernel-doc headers and promote other worthy ones
Fixes the following W=1 kernel build warning(s):
drivers/clk/ti/dpll3xxx.c:414: warning: Function parameter or member 'hw' not described in 'omap3_dpll_recalc'
drivers/clk/ti/dpll3xxx.c:414: warning: Function parameter or member 'parent_rate' not described in 'omap3_dpll_recalc'
drivers/clk/ti/dpll3xxx.c:414: warning: Excess function parameter 'clk' description in 'omap3_dpll_recalc'
drivers/clk/ti/dpll3xxx.c:437: warning: Function parameter or member 'hw' not described in 'omap3_noncore_dpll_enable'
drivers/clk/ti/dpll3xxx.c:437: warning: Excess function parameter 'clk' description in 'omap3_noncore_dpll_enable'
drivers/clk/ti/dpll3xxx.c:479: warning: Function parameter or member 'hw' not described in 'omap3_noncore_dpll_disable'
drivers/clk/ti/dpll3xxx.c:479: warning: Excess function parameter 'clk' description in 'omap3_noncore_dpll_disable'
drivers/clk/ti/dpll3xxx.c:755: warning: Function parameter or member 'hw' not described in 'omap3_clkoutx2_recalc'
drivers/clk/ti/dpll3xxx.c:755: warning: Function parameter or member 'parent_rate' not described in 'omap3_clkoutx2_recalc'
drivers/clk/ti/dpll3xxx.c:755: warning: Excess function parameter 'clk' description in 'omap3_clkoutx2_recalc'
Cc: Tero Kristo <kristo@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-omap@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-4-lee.jones@linaro.org Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Tue, 26 Jan 2021 12:45:21 +0000 (12:45 +0000)]
clk: ti: clkt_dpll: Fix some kernel-doc misdemeanours
Fixes the following W=1 kernel build warning(s):
drivers/clk/ti/clkt_dpll.c:284: warning: Function parameter or member 'hw' not described in 'omap2_dpll_round_rate'
drivers/clk/ti/clkt_dpll.c:284: warning: Function parameter or member 'parent_rate' not described in 'omap2_dpll_round_rate'
drivers/clk/ti/clkt_dpll.c:284: warning: Excess function parameter 'clk' description in 'omap2_dpll_round_rate'
Cc: Tero Kristo <kristo@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: linux-omap@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-3-lee.jones@linaro.org Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lee Jones [Tue, 26 Jan 2021 12:45:20 +0000 (12:45 +0000)]
clk: zynq: pll: Fix kernel-doc formatting in 'clk_register_zynq_pll's header
Fixes the following W=1 kernel build warning(s):
drivers/clk/zynq/pll.c:187: warning: Function parameter or member 'name' not described in 'clk_register_zynq_pll'
drivers/clk/zynq/pll.c:187: warning: Function parameter or member 'parent' not described in 'clk_register_zynq_pll'
drivers/clk/zynq/pll.c:187: warning: Function parameter or member 'pll_ctrl' not described in 'clk_register_zynq_pll'
drivers/clk/zynq/pll.c:187: warning: Function parameter or member 'pll_status' not described in 'clk_register_zynq_pll'
drivers/clk/zynq/pll.c:187: warning: Function parameter or member 'lock_index' not described in 'clk_register_zynq_pll'
drivers/clk/zynq/pll.c:187: warning: Function parameter or member 'lock' not described in 'clk_register_zynq_pll'
Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-2-lee.jones@linaro.org Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Tudor Ambarus [Wed, 3 Feb 2021 15:43:32 +0000 (17:43 +0200)]
clk: at91: Fix the declaration of the clocks
These are all "early clocks" that require initialization just at
of_clk_init() time. Use CLK_OF_DECLARE() to declare them.
This also fixes a problem that was spotted when fw_devlink was
set to 'on' by default: the boards failed to boot. The reason is
that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes
the consumers of the clock to be postponed by fw_devlink until
the second initialization routine of the clock has been completed.
One of the consumers of the clock is the timer, which is used as a
clocksource, and needs the clock initialized early. Postponing the
timers caused the fail at boot.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210203154332.470587-1-tudor.ambarus@microchip.com Acked-by: Saravana Kannan <saravanak@google.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stephen Boyd [Wed, 10 Feb 2021 00:03:39 +0000 (16:03 -0800)]
Merge tag 'clk-meson-v5.12-1-fixed' of https://github.com/BayLibre/clk-meson into clk-amlogic
Pull Amlogic clk driver updates from Jerome Brunet:
- pll driver fixup
- meson8b clock controller dt support clean up
- remove mipi clk from the axg clock controller
* tag 'clk-meson-v5.12-1-fixed' of https://github.com/BayLibre/clk-meson:
clk: meson: axg: Remove MIPI enable clock gate
clk: meson-axg: remove CLKID_MIPI_ENABLE
dt-bindings: clock: meson8b: remove non-existing clock macros
clk: meson: meson8b: remove compatibility code for old .dtbs
clk: meson: clk-pll: propagate the error from meson_clk_pll_set_rate()
clk: meson: clk-pll: make "ret" a signed integer
clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL
Laurent Pinchart [Mon, 25 Jan 2021 17:08:19 +0000 (19:08 +0200)]
clk: mediatek: mux: Update parent at enable time
The mux clocks don't always correctly take the new parent into account
when the parent is updated while the clock is disabled. Set the update
bit when enabling the clock to force an update of the mux.
clk: mediatek: Select all the MT8183 clocks by default
If MT8183 SoC support is enabled, almost all machines will use topckgen,
apmixedsys, infracfg, mcucfg and subsystem clocks, so it feels wrong to
require each one to select that symbols manually.
Instead, enable it whenever COMMON_CLK_MT8183_* is disabled as
a simplification. This would add few KB in the kernel image size but
will make the life a bit easier to the users, anyway you'll need to probably
enable all of them if you want to have proper support for that SoC.
Michael Tretter [Thu, 21 Jan 2021 07:16:59 +0000 (08:16 +0100)]
clk: xilinx: move xlnx_vcu clock driver from soc
The xlnx_vcu driver is actually a clock controller driver which provides
clocks that can be used by a driver for the encoder/decoder units. There
is no reason to keep this driver in soc. Move the driver to clk.
NOTE: The register mapping actually contains registers for AXI
performance monitoring, but these are not used by the driver.
Michael Tretter [Thu, 21 Jan 2021 07:16:55 +0000 (08:16 +0100)]
soc: xilinx: vcu: remove calculation of PLL configuration
As the consumers are now responsible for setting the clock rate via
clock framework, the clock rate is now calculated using round_rate and
the driver does not need to calculate the clock rate beforehand.
Remove the code that calculates the PLL configuration.
Michael Tretter [Thu, 21 Jan 2021 07:16:54 +0000 (08:16 +0100)]
soc: xilinx: vcu: make the PLL configurable
Do not configure the PLL when probing the driver, but register the clock
in the clock framework and do the configuration based on the respective
callbacks.
This is necessary to allow the consumers, i.e., encoder and decoder
drivers, of the xlnx_vcu clock provider to set the clock rate and
actually enable the clocks without relying on some pre-configuration.
Michael Tretter [Thu, 21 Jan 2021 07:16:53 +0000 (08:16 +0100)]
soc: xilinx: vcu: make pll post divider explicit
According to the downstream driver documentation due to timing
constraints the output divider of the PLL has to be set to 1/2. Add a
helper function for that check instead of burying the code in one large
setup function.
The bit is undocumented and marked as reserved in the register
reference.
Michael Tretter [Thu, 21 Jan 2021 07:16:52 +0000 (08:16 +0100)]
soc: xilinx: vcu: implement clock provider for output clocks
The VCU System-Level Control uses an internal PLL to drive the core and
MCU clock for the allegro encoder and decoder based on an external PL
clock.
In order be able to ensure that the clocks are enabled and to get their
rate from other drivers, the module must implement a clock provider and
register the clocks at the common clock framework. Other drivers are
then able to access the clock via devicetree bindings.
Michael Tretter [Thu, 21 Jan 2021 07:16:51 +0000 (08:16 +0100)]
soc: xilinx: vcu: register PLL as fixed rate clock
Currently, xvcu_pll_set_rate configures the PLL to a clock rate that is
pre-calculated when probing the driver. To still make the clock
framework aware of the PLL and to allow to configure other clocks based
on the PLL rate, register the PLL as a fixed rate clock.
Michael Tretter [Thu, 21 Jan 2021 07:16:50 +0000 (08:16 +0100)]
soc: xilinx: vcu: implement PLL disable
The disabling of the PLL is not fully implemented, because according to
the ZynqMP register reference the RESET, POR_IN and PWR_POR bits have to
be set to bring the PLL into reset.
Michael Tretter [Thu, 21 Jan 2021 07:16:49 +0000 (08:16 +0100)]
soc: xilinx: vcu: add helpers for configuring PLL
The xvcu_set_vcu_pll_info function sets the rate of the PLL and enables
it, which makes it difficult to cleanly convert the driver to the common
clock framework.
Split the function and add separate functions for setting the rate,
enabling the clock and disabling the clock.
Also move the enable of the reference clock from probe to the helper
that enables the PLL.
Michael Tretter [Thu, 21 Jan 2021 07:16:48 +0000 (08:16 +0100)]
soc: xilinx: vcu: add helper to wait for PLL locked
Extract a helper function to wait until the PLL is locked. Also,
disabling the bypass was buried in the exit path on the wait loop.
Separate the different steps and add a helper function to make the code
more readable.
Michael Tretter [Thu, 21 Jan 2021 07:16:46 +0000 (08:16 +0100)]
clk: divider: fix initialization with parent_hw
If a driver registers a divider clock with a parent_hw instead of the
parent_name, the parent_hw is ignored and the clock does not have a
parent.
Fix this by initializing the parents the same way they are initialized
for clock gates.
Fixes: ff258817137a ("clk: divider: Add support for specifying parents via DT/pointers") Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-3-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Michael Tretter [Thu, 21 Jan 2021 07:16:45 +0000 (08:16 +0100)]
ARM: dts: vcu: define indexes for output clocks
The VCU System-Level Control has 4 output clocks. Define indexes for
these clocks to allow to reference them in the device tree.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-2-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For ZynqMP (Ultrascale) the PFD and VCO limits are different. In order to
support these, this change adds a compatible string (i.e.
'adi,zynqmp-axi-clkgen-2.00.a') which will take into account for these
limits and apply them.
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Mathias Tausen <mta@gomspace.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210201151245.21845-3-alexandru.ardelean@analog.com Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: axi-clkgen: replace ARCH dependencies with driver deps
The intent is to be able to run this driver to access the IP core in setups
where FPGA board is also connected via a PCIe bus. In such cases the number
of combinations explodes, where the host system can be an x86 with Xilinx
Zynq/ZynqMP/Microblaze board connected via PCIe.
Or even a ZynqMP board with a ZynqMP/Zynq/Microblaze connected via PCIe.
To accommodate for these cases, this change removes the limitation for this
driver to be compilable only on Zynq/Microblaze architectures.
And adds dependencies on the mechanisms required by the driver to work (OF
and HAS_IOMEM).
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210201151245.21845-2-alexandru.ardelean@analog.com Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stephen Boyd [Mon, 8 Feb 2021 20:24:52 +0000 (12:24 -0800)]
Merge tag 'v5.12-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull Rockchip clk driver updates from Heiko Stuebner:
- Kerneldoc fixes
- some new rk3368 clock ids related to camera input
* tag 'v5.12-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: fix DPHY gate locations on rk3368
clk: rockchip: use clock id for SCLK_VIP_OUT on rk3368
clk: rockchip: add clock id for SCLK_VIP_OUT on rk3368
clk: rockchip: use clock ids for PCLK_DPHYRX and PCLK_DPHYTX0 on rk3368
clk: rockchip: add clock ids for PCLK_DPHYRX and PCLK_DPHYTX0 on rk3368
clk: rockchip: Demote non-conformant kernel-doc header in half-divider
clk: rockchip: Demote kernel-doc abuses to standard comment blocks in plls
clk: rockchip: Remove unused/undocumented struct members from clk-cpu
clk: rockchip: Demote non-conformant kernel-doc headers in main clock code
clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on
This GDSC enables (or cuts!) power to the Multimedia Subsystem IOMMU
(mmss smmu), which has bootloader pre-set secure contexts.
In the event of a complete power loss, the secure contexts will be
reset and the hypervisor will crash the SoC.
To prevent this, and get a working multimedia subsystem, set this
GDSC as always on.
clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks
Hardware clock gating is supported on some of the clocks declared in
there: ignoring that it does exist may lead to unstabilities on some
firmwares.
Add the HWCG registers where applicable to stop potential crashes.
This was verified on a smartphone shipped with a recent MSM8998
firmware, which will experience random crashes without this change.
clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs
All of the GPLLs in the MSM8998 Global Clock Controller are Fabia PLLs
and not generic alphas: this was producing bad effects over the entire
clock tree of MSM8998, where any GPLL child clock was declaring a false
clock rate, due to their parent also showing the same.
The issue resides in the calculation of the clock rate for the specific
Alpha PLL type, where Fabia has a different register layout; switching
the MSM8998 GPLLs to the correct Alpha Fabia PLL type fixes the rate
(calculation) reading. While at it, also make these PLLs fixed since
their rate is supposed to *never* be changed while the system runs, as
this would surely crash the entire SoC.
Now all the children of all the PLLs are also complying with their
specified clock table and system stability is improved.
projects / kernel.git / log