Dave Wysochanski [Tue, 29 Jun 2021 17:13:57 +0000 (13:13 -0400)]
NFS: Fix fscache read from NFS after cache error
Earlier commits refactored some NFS read code and removed
nfs_readpage_async(), but neglected to properly fixup
nfs_readpage_from_fscache_complete(). The code path is
only hit when something unusual occurs with the cachefiles
backing filesystem, such as an IO error or while a cookie
is being invalidated.
Mark page with PG_checked if fscache IO completes in error,
unlock the page, and let the VM decide to re-issue based on
PG_uptodate. When the VM reissues the readpage, PG_checked
allows us to skip over fscache and read from the server.
Link: https://marc.info/?l=linux-nfs&m=162498209518739 Fixes: e63672374c73 ("NFS: Add nfs_pageio_complete_read() and remove nfs_readpage_async()") Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Dave Wysochanski [Tue, 29 Jun 2021 09:11:28 +0000 (05:11 -0400)]
NFS: Ensure nfs_readpage returns promptly when internal error occurs
A previous refactoring of nfs_readpage() might end up calling
wait_on_page_locked_killable() even if readpage_async_filler() failed
with an internal error and pg_error was non-zero (for example, if
nfs_create_request() failed). In the case of an internal error,
skip over wait_on_page_locked_killable() as this is only needed
when the read is sent and an error occurs during completion handling.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
sunrpc: provide transport info in the sysfs directory
Allow to query transport's attributes. Currently showing following
fields of the rpc_xprt structure: state, last_used, cong, cwnd,
max_reqs, min_reqs, num_reqs, sizes of queues binding, sending,
pending, backlog.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
sunrpc: add add sysfs directory per xprt under each xprt_switch
Add individual transport directories under each transport switch
group. For instance, for each nconnect=X connections there will be
a transport directory. Naming conventions also identifies transport
type -- xprt-<id>-<type> where type is udp, tcp, rdma, local, bc.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
sunrpc: add a symlink from rpc-client directory to the xprt_switch
An rpc client uses a transport switch and one ore more transports
associated with that switch. Since transports are shared among
rpc clients, create a symlink into the xprt_switch directory
instead of duplicating entries under each rpc client.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Zhang Xiaoxu [Sat, 26 Jun 2021 07:50:42 +0000 (15:50 +0800)]
SUNRPC: Should wake up the privileged task firstly.
When find a task from wait queue to wake up, a non-privileged task may
be found out, rather than the privileged. This maybe lead a deadlock
same as commit e4abb4a0415e ("NFSv4: Fix deadlock between nfs4_evict_inode()
and nfs4_opendata_get_inode()"):
Privileged delegreturn task is queued to privileged list because all
the slots are assigned. If there has no enough slot to wake up the
non-privileged batch tasks(session less than 8 slot), then the privileged
delegreturn task maybe lost waked up because the found out task can't
get slot since the session is on draining.
So we should treate the privileged task as the emergency task, and
execute it as for as we can.
Zhang Xiaoxu [Sat, 26 Jun 2021 07:50:41 +0000 (15:50 +0800)]
SUNRPC: Fix the batch tasks count wraparound.
The 'queue->nr' will wraparound from 0 to 255 when only current
priority queue has tasks. This maybe lead a deadlock same as commit e4abb4a0415e ("NFSv4: Fix deadlock between nfs4_evict_inode()
and nfs4_opendata_get_inode()"):
Privileged delegreturn task is queued to privileged list because all
the slots are assigned. When non-privileged task complete and release
the slot, a non-privileged maybe picked out. It maybe allocate slot
failed when the session on draining.
If the 'queue->nr' has wraparound to 255, and no enough slot to
service it, then the privileged delegreturn will lost to wake up.
Scott Mayhew [Tue, 22 Jun 2021 12:11:59 +0000 (08:11 -0400)]
nfs: update has_sec_mnt_opts after cloning lsm options from parent
After calling security_sb_clone_mnt_opts() in nfs_get_root(), it's
necessary to copy the value of has_sec_mnt_opts from the cloned
super_block's nfs_server. Otherwise, calls to nfs_compare_super()
using this super_block may not return the correct result, leading to
mount failures.
For example, mounting an nfs server with the following in /etc/exports:
/export *(rw,insecure,crossmnt,no_root_squash,security_label)
and having /export/scratch on a separate block device.
mount -o v4.2,context=system_u:object_r:root_t:s0 server:/export/test /mnt/test
mount -o v4.2,context=system_u:object_r:swapfile_t:s0 server:/export/scratch /mnt/scratch
The second mount would fail with "mount.nfs: /mnt/scratch is busy or
already mounted or sharecache fail" and "SELinux: mount invalid. Same
superblock, different security settings for..." would appear in the
syslog.
Also while we're in there, replace several instances of "NFS_SB(s)"
with "server", which was already declared at the top of the
nfs_get_root().
Fixes: 9a335b4d21a5 ("nfs: account for selinux security context when deciding to share superblock") Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Sat, 26 Jun 2021 15:07:59 +0000 (11:07 -0400)]
NFS: Avoid duplicate resets of attribute cache timeouts
We know that the attributes changed on the server if and only if the
change attribute is different. Otherwise, we're just refreshing our
cache with values that were already known to be stale.
Trond Myklebust [Fri, 25 Jun 2021 19:49:31 +0000 (15:49 -0400)]
NFSv4: Fix handling of non-atomic change attrbute updates
If the change attribute update is declared to be non-atomic by the
server, or our cached value does not match the server's value before the
operation was performed, then we should declare the inode cache invalid.
On the other hand, if the change to the directory raced with a lookup or
getattr which already updated the change attribute, then optimise away
the revalidation.
Trond Myklebust [Sat, 26 Jun 2021 13:23:51 +0000 (09:23 -0400)]
NFS: Fix up inode attribute revalidation timeouts
The inode is considered revalidated when we've checked the value of the
change attribute against our cached value since that suffices to
establish whether or not the other cached values are valid.
Gao Xiang [Fri, 18 Jun 2021 04:20:55 +0000 (12:20 +0800)]
nfs: fix acl memory leak of posix_acl_create()
When looking into another nfs xfstests report, I found acl and
default_acl in nfs3_proc_create() and nfs3_proc_mknod() error
paths are possibly leaked. Fix them in advance.
Fixes: 174fbfd5be52 ("nfs: use generic posix ACL infrastructure for v3 Posix ACLs") Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
NeilBrown [Tue, 15 Jun 2021 01:18:38 +0000 (11:18 +1000)]
SUNRPC: prevent port reuse on transports which don't request it.
If an RPC client is created without RPC_CLNT_CREATE_REUSEPORT, it should
not reuse the source port when a TCP connection is re-established.
This is currently implemented by preventing the source port being
recorded after a successful connection (the call to xs_set_srcport()).
However the source port is also recorded after a successful bind in xs_bind().
This may not be needed at all and certainly is not wanted when
RPC_CLNT_CREATE_REUSEPORT wasn't requested.
So avoid that assignment when xprt.reuseport is not set.
With this change, NFSv4.1 and later mounts use a different port number on
each connection. This is helpful with some firewalls which don't cope
well with port reuse.
Signed-off-by: NeilBrown <neilb@suse.de> Fixes: f72d31a87778 ("NFSv4.1: Don't rebind to the same source port when reconnecting to the server") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Colin Ian King [Sun, 13 Jun 2021 14:06:52 +0000 (15:06 +0100)]
rpc: remove redundant initialization of variable status
The variable status is being initialized with a value that is never
read, the assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Anna Schumaker [Wed, 9 Jun 2021 21:07:29 +0000 (17:07 -0400)]
sunrpc: Avoid a KASAN slab-out-of-bounds bug in xdr_set_page_base()
This seems to happen fairly easily during READ_PLUS testing on NFS v4.2.
I found that we could end up accessing xdr->buf->pages[pgnr] with a pgnr
greater than the number of pages in the array. So let's just return
early if we're setting base to a point at the end of the page data and
let xdr_set_tail_base() handle setting up the buffer pointers instead.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Fixes: 99be78ff9be0 ("SUNRPC: Clean up helpers xdr_set_iov() and xdr_set_page_base()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Fri, 11 Jun 2021 17:40:55 +0000 (13:40 -0400)]
NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT
Fix an Oopsable condition in pnfs_mark_request_commit() when we're
putting a set of writes on the commit list to reschedule them after a
failed pNFS attempt.
Trond Myklebust [Wed, 9 Jun 2021 14:04:46 +0000 (10:04 -0400)]
NFSv4: Initialise connection to the server in nfs4_alloc_client()
Set up the connection to the NFSv4 server in nfs4_alloc_client(), before
we've added the struct nfs_client to the net-namespace's nfs_client_list
so that a downed server won't cause other mounts to hang in the trunking
detection code.
Reported-by: Michael Wakabayashi <mwakabayashi@vmware.com> Fixes: bb9e322db435 ("NFS: Fix an Oops in the pNFS files and flexfiles connection setup to the DS") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Fri, 7 May 2021 14:06:13 +0000 (10:06 -0400)]
NFSv4: Add support for application leases underpinned by a delegation
If the NFSv4 client already holds a delegation for a file, then we can
support application leases (i.e. fcntl(fd, F_SETLEASE,...)) because the
underlying delegation guarantees that the file is not being modified on
the server by another client in a way that might conflict with the lease
guarantees.
Trond Myklebust [Fri, 7 May 2021 13:14:37 +0000 (09:14 -0400)]
NFSv4: Add lease breakpoints in case of a delegation recall or return
When we add support for application level leases and knfsd delegations
to the NFS client, we we want to have them safely underpinned by a
"real" delegation to provide the caching guarantees. If that real
delegation is recalled, then we need to ensure that the application
leases/delegations are recalled too.
Trond Myklebust [Sat, 8 May 2021 14:01:32 +0000 (10:01 -0400)]
NFSv4: Fix delegation return in cases where we have to retry
If we're unable to immediately recover all locks because the server is
unable to immediately service our reclaim calls, then we want to retry
after we've finished servicing all the other asynchronous delegation
returns on our queue.
Linus Torvalds [Sun, 13 Jun 2021 19:41:47 +0000 (12:41 -0700)]
Merge tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Correct buffer copying when peeking events
- Sync cpufeatures/disabled-features.h header with the kernel sources
* tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers cpufeatures: Sync with the kernel sources
perf session: Correct buffer copying when peeking events
Linus Torvalds [Sun, 13 Jun 2021 19:32:59 +0000 (12:32 -0700)]
Merge tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix use-after-free in nfs4_init_client()
Bugfixes:
- Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
- Fix second deadlock in nfs4_evict_inode()
- nfs4_proc_set_acl should not change the value of NFS_CAP_UIDGID_NOMAP
- Fix setting of the NFS_CAP_SECURITY_LABEL capability"
* tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix second deadlock in nfs4_evict_inode()
NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
NFS: FMODE_READ and friends are C macros, not enum types
NFS: Fix a potential NULL dereference in nfs_get_client()
NFS: Fix use-after-free in nfs4_init_client()
NFS: Ensure the NFS_CAP_SECURITY_LABEL capability is set when appropriate
NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.
Linus Torvalds [Sun, 13 Jun 2021 19:25:33 +0000 (12:25 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four reasonably small fixes to the core for scsi host allocation
failure paths.
The root problem is that we're not freeing the memory allocated by
dev_set_name(), which involves a rejig of may of the free on error
paths to do put_device() instead of kfree which, in turn, has several
other knock on ramifications and inspection turned up a few other
lurking bugs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Only put parent device if host state differs from SHOST_CREATED
scsi: core: Put .shost_dev in failure path if host state changes to RUNNING
scsi: core: Fix failure handling of scsi_add_host_with_dma()
scsi: core: Fix error handling of scsi_host_alloc()
Linus Torvalds [Sat, 12 Jun 2021 20:57:49 +0000 (13:57 -0700)]
Merge tag 'riscv-for-linus-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of XIP fixes: one to fix alternatives, and one to turn off the
rest of the features that require code modification
- A fix to a type that was causing some alternatives to break
- A build fix for BUILTIN_DTB
* tag 'riscv-for-linus-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix BUILTIN_DTB for sifive and microchip soc
riscv: alternative: fix typo in macro name
riscv: code patching only works on !XIP_KERNEL
riscv: xip: support runtime trap patching
Feng Tang [Fri, 11 Jun 2021 01:54:42 +0000 (09:54 +0800)]
mm: relocate 'write_protect_seq' in struct mm_struct
0day robot reported a 9.2% regression for will-it-scale mmap1 test
case[1], caused by commit 9c5d816d4cd7 ("mm/gup: prevent gup_fast from
racing with COW during fork").
Further debug shows the regression is due to that commit changes the
offset of hot fields 'mmap_lock' inside structure 'mm_struct', thus some
cache alignment changes.
From the perf data, the contention for 'mmap_lock' is very severe and
takes around 95% cpu cycles, and it is a rw_semaphore
Before commit 9c5d816d4cd7 adds the 'write_protect_seq', it happens to
have a very optimal cache alignment layout, as Linus explained:
"and before the addition of the 'write_protect_seq' field, the
mmap_sem was at offset 120 in 'struct mm_struct'.
Which meant that count and owner were in two different cachelines,
and then when you have contention and spend time in
rwsem_down_write_slowpath(), this is probably *exactly* the kind
of layout you want.
Because first the rwsem_write_trylock() will do a cmpxchg on the
first cacheline (for the optimistic fast-path), and then in the
case of contention, rwsem_down_write_slowpath() will just access
the second cacheline.
Which is probably just optimal for a load that spends a lot of
time contended - new waiters touch that first cacheline, and then
they queue themselves up on the second cacheline."
After the commit, the rw_semaphore is at offset 128, which means the
'count' and 'owner' fields are now in the same cacheline, and causes
more cache bouncing.
Currently there are 3 "#ifdef CONFIG_XXX" before 'mmap_lock' which will
affect its offset:
The layout above is on 64 bits system with 0day's default kernel config
(similar to RHEL-8.3's config), in which all these 3 options are 'y'.
And the layout can vary with different kernel configs.
Relayouting a structure is usually a double-edged sword, as sometimes it
can helps one case, but hurt other cases. For this case, one solution
is, as the newly added 'write_protect_seq' is a 4 bytes long seqcount_t
(when CONFIG_DEBUG_LOCK_ALLOC=n), placing it into an existing 4 bytes
hole in 'mm_struct' will not change other fields' alignment, while
restoring the regression.
Link: https://lore.kernel.org/lkml/20210525031636.GB7744@xsang-OptiPlex-9020/ Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 12 Jun 2021 19:34:49 +0000 (12:34 -0700)]
Merge tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of tiny USB fixes for 5.13-rc6.
There are more than I would normally like, but there's been a bunch of
people banging on the gadget and dwc3 and typec code recently for I
think an Android release, which has resulted in a number of small
fixes. It's nice to see companies send fixes upstream for this type of
work, a notable change from years ago.
Anyway, fixes in here are:
- usb-serial device id updates
- usb-serial cp210x driver fixes for broken firmware versions
- typec fixes for crazy charging devices and other reported problems
- dwc3 fixes for reported problems found
- gadget fixes for reported problems
- tiny xhci fixes
- other small fixes for reported issues.
- revert of a problem fix found by linux-next testing
All of these have passed 0-day and linux-next testing with no reported
problems (the revert for the found linux-next build problem included)"
* tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits)
Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs"
usb: typec: mux: Fix copy-paste mistake in typec_mux_match
usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path
usb: gadget: fsl: Re-enable driver for ARM SoCs
usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
USB: serial: cp210x: fix CP2102N-A01 modem control
USB: serial: cp210x: fix alternate function for CP2102N QFN20
usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource()
usb: dwc3: ep0: fix NULL pointer exception
usb: gadget: eem: fix wrong eem header operation
usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()
usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()
usb: typec: tcpm: Do not finish VDM AMS for retrying Responses
usb: fix various gadget panics on 10gbps cabling
usb: fix various gadgets null ptr deref on 10gbps cabling.
usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
usb: f_ncm: only first packet of aggregate needs to start timer
USB: f_ncm: ncm_bitrate (speed) is unsigned
MAINTAINERS: usb: add entry for isp1760
...
Linus Torvalds [Sat, 12 Jun 2021 19:13:55 +0000 (12:13 -0700)]
Merge tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small misc driver fixes for 5.13-rc6 that fix some
reported problems:
- Tiny phy driver fixes for reported issues
- rtsx regression for when the device suspended
- mhi driver fix for a use-after-free
All of these have been in linux-next for a few days with no reported
issues"
* tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG
bus: mhi: pci-generic: Fix hibernation
bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()
bus: mhi: pci_generic: T99W175: update channel name from AT to DUN
phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()
phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable
phy: ti: Fix an error code in wiz_probe()
phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()
phy: usb: Fix misuse of IS_ENABLED
Linus Torvalds [Sat, 12 Jun 2021 19:06:24 +0000 (12:06 -0700)]
Merge tag 'pinctrl-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix some documentation warnings for Allwinner
- Fix duplicated GPIO groups on Qualcomm SDX55
- Fix a double enablement bug in the Ralink driver
- Fix the Qualcomm SC8180x Kconfig so the driver can be selected.
* tag 'pinctrl-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Make it possible to select SC8180x TLMM
pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabled
pinctrl: qcom: Fix duplication in gpio_groups
pinctrl: aspeed: Fix minor documentation error
Linus Torvalds [Sat, 12 Jun 2021 18:59:58 +0000 (11:59 -0700)]
Merge tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into 5.13:
- Fix a regression deadlock introduced in this release between open
and remove of a bdev (Christoph)
- Fix an async_xor md regression in this release (Xiao)
- Fix bcache oversized read issue (Coly)"
* tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
block: loop: fix deadlock between open and remove
async_xor: check src_offs is not NULL before updating it
bcache: avoid oversized read request in cache missing code path
bcache: remove bcache device self-defined readahead
Linus Torvalds [Sat, 12 Jun 2021 18:53:20 +0000 (11:53 -0700)]
Merge tag 'io_uring-5.13-2021-06-12' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Just an API change for the registration changes that went into this
release. Better to get it sorted out now than before it's too late"
* tag 'io_uring-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
io_uring: add feature flag for rsrc tags
io_uring: change registration/upd/rsrc tagging ABI
Linus Torvalds [Sat, 12 Jun 2021 18:41:28 +0000 (11:41 -0700)]
Merge tag 'sched-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes:
- Fix performance regression caused by lack of intended batching of
RCU callbacks by over-eager NOHZ-full code.
- Fix cgroups related corruption of load_avg and load_sum metrics.
- Three fixes to fix blocked load, util_sum/runnable_sum and util_est
tracking bugs"
* tag 'sched-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix util_est UTIL_AVG_UNCHANGED handling
sched/pelt: Ensure that *_sum is always synced with *_avg
tick/nohz: Only check for RCU deferred wakeup on user/guest entry when needed
sched/fair: Make sure to update tg contrib for blocked load
sched/fair: Keep load_avg and load_sum synced
Linus Torvalds [Sat, 12 Jun 2021 18:34:49 +0000 (11:34 -0700)]
Merge tag 'perf-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes:
- Fix the NMI watchdog on ancient Intel CPUs
- Remove a misguided, NMI-unsafe KASAN callback from the NMI-safe
irq_work path used by perf.
- Fix uncore events on Ice Lake servers.
- Someone booted maxcpus=1 on an SNB-EP, and the uncore driver
emitted warnings and was probably buggy. Fix it.
- KCSAN found a genuine data race in the core perf code. Somewhat
ironically the bug was introduced through a recent race fix. :-/
In our defense, the new race window was much more narrow. Fix it"
* tag 'perf-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi_watchdog: Fix old-style NMI watchdog regression on old Intel CPUs
irq_work: Make irq_work_queue() NMI-safe again
perf/x86/intel/uncore: Fix M2M event umask for Ice Lake server
perf/x86/intel/uncore: Fix a kernel WARNING triggered by maxcpus=1
perf: Fix data race between pin_count increment/decrement
Linus Torvalds [Sat, 12 Jun 2021 18:10:28 +0000 (11:10 -0700)]
Merge tag 'objtool-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Two objtool fixes:
- fix a bug that corrupts the code by mistakenly rewriting
conditional jumps
- fix another bug generating an incorrect ELF symbol table
during retpoline rewriting"
* tag 'objtool-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Only rewrite unconditional retpoline thunk calls
objtool: Fix .symtab_shndx handling for elf_create_undef_symbol()
Alexandre Ghiti [Fri, 4 Jun 2021 12:06:39 +0000 (14:06 +0200)]
riscv: Fix BUILTIN_DTB for sifive and microchip soc
Fix BUILTIN_DTB config which resulted in a dtb that was actually not
built into the Linux image: in the same manner as Canaan soc does,
create an object file from the dtb file that will get linked into the
Linux image.
Linus Torvalds [Sat, 12 Jun 2021 00:05:03 +0000 (17:05 -0700)]
Merge tag 'trace-v5.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the length check in the temp buffer filter
- Fix build failure in bootconfig tools for "fallthrough" macro
- Fix error return of bootconfig apply_xbc() routine
* tag 'trace-v5.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Correct the length check which causes memory corruption
ftrace: Do not blindly read the ip address in ftrace_bug()
tools/bootconfig: Fix a build error accroding to undefined fallthrough
tools/bootconfig: Fix error return code in apply_xbc()
Linus Torvalds [Fri, 11 Jun 2021 19:33:38 +0000 (12:33 -0700)]
Merge tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Another week of fixes, nothing too crazy, but a few all over the
place.
Two locking fixes in the core/ttm area, a couple of small driver fixes
(radeon, sun4i, mcde, vc4). Then msm and amdgpu have a set of fixes
each, mostly for smaller things, though the msm has a DSI fix for a
black screen.
I haven't seen any intel fixes this week so they may have a few that
may or may not wait for next week.
drm:
- auth locking fix
ttm:
- locking fix
amdgpu:
- Use kvzmalloc in amdgu_bo_create
- Use drm_dbg_kms for reporting failure to get a GEM FB
- Fix some register offsets for Sienna Cichlid
- Fix fall-through warning
* tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drm:
drm/msm/dsi: Stash away calculated vco frequency on recalc
drm: Lock pointer access in drm_master_release()
drm/mcde: Fix off by 10^3 in calculation
drm/msm/a6xx: avoid shadow NULL reference in failure path
drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650
drm/msm/a6xx: update/fix CP_PROTECT initialization
radeon: use memcpy_to/fromio for UVD fw upload
drm/amd/pm: Fix fall-through warning for Clang
drm/amdgpu: Fix incorrect register offsets for Sienna Cichlid
drm/amdgpu: Use drm_dbg_kms for reporting failure to get a GEM FB
drm/amdgpu: switch kzalloc to kvzalloc in amdgpu_bo_create
drm/msm: Init mm_list before accessing it for use_vram path
drm: Fix use-after-free read in drm_getunique()
drm/vc4: fix vc4_atomic_commit_tail() logic
drm/ttm: fix deref of bo->ttm without holding the lock v2
drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device
Linus Torvalds [Fri, 11 Jun 2021 17:53:43 +0000 (10:53 -0700)]
Merge tag 'acpi-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert a problematic recent commit and fix a regression
introduced during the 5.12 development cycle.
Specifics:
- Revert recent commit that attempted to fix the FACS table reference
counting but introduced a problem with accessing the hardware
signature after hibernation (Zhang Rui).
- Fix regression in the _OSC handling that broke the loading of ACPI
tables on some systems (Mika Westerberg)"
* tag 'acpi-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Pass the same capabilities to the _OSC regardless of the query flag
Revert "ACPI: sleep: Put the FACS table after using it"
Commit 4a92cb3acc41 ("block: take bd_mutex around delete_partitions in
del_gendisk") adds disk->part0->bd_mutex in del_gendisk(), this way
causes the following AB/BA deadlock between removing loop and opening
loop:
Add a new Lo_deleting state to remove the need for clearing
->private_data and thus holding loop_ctl_mutex in the ioctl
LOOP_CTL_REMOVE path.
Based on an analysis and earlier patch from
Ming Lei <ming.lei@redhat.com>.
Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: 4a92cb3acc41 ("block: take bd_mutex around delete_partitions in del_gendisk") Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210605140950.5800-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 11 Jun 2021 17:47:10 +0000 (10:47 -0700)]
Merge tag 'sound-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bit more commits than expected at this time, but likely it's the
last shot before the final.
Many of changes are device-specific fix-ups for various ASoC drivers,
while a few usual HD-audio quirks and a FireWire fix, as well as a
couple of ALSA / ASoC core fixes.
All look nice and small, and nothing to scare much"
* tag 'sound-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Fix race of snd_seq_timer_open()
ALSA: hda/realtek: fix mute/micmute LEDs for HP ZBook Power G8
ALSA: hda/realtek: headphone and mic don't work on an Acer laptop
ASoC: qcom: lpass-cpu: Fix pop noise during audio capture begin
ALSA: firewire-lib: fix the context to call snd_pcm_stop_xrun()
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 840 Aero G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP EliteBook x360 1040 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Elite Dragonfly G2
ASoC: rt5682: Fix the fast discharge for headset unplugging in soundwire mode
ASoC: tas2562: Fix TDM_CFG0_SAMPRATE values
ASoC: meson: gx-card: fix sound-dai dt schema
ASoC: AMD Renoir: Remove fix for DMI entry on Lenovo 2020 platforms
ASoC: AMD Renoir - add DMI entry for Lenovo 2020 AMD platforms
ASoC: SOF: reset enabled_cores state at suspend
ASoC: fsl-asoc-card: Set .owner attribute when registering card.
ASoC: topology: Fix spelling mistake "vesion" -> "version"
ASoC: rt5659: Fix the lost powers for the HDA header
ASoC: core: Fix Null-point-dereference in fmt_single_name()
Tor Vic [Thu, 10 Jun 2021 20:58:06 +0000 (20:58 +0000)]
x86, lto: Pass -stack-alignment only on LLD < 13.0.0
Since LLVM commit 3787ee4, the '-stack-alignment' flag has been dropped
[1], leading to the following error message when building a LTO kernel
with Clang-13 and LLD-13:
ld.lld: error: -plugin-opt=-: ld.lld: Unknown command line argument
'-stack-alignment=8'. Try 'ld.lld --help'
ld.lld: Did you mean '--stackrealign=8'?
It also appears that the '-code-model' flag is not necessary anymore
starting with LLVM-9 [2].
Drop '-code-model' and make '-stack-alignment' conditional on LLD < 13.0.0.
These flags were necessary because these flags were not encoded in the
IR properly, so the link would restart optimizations without them. Now
there are properly encoded in the IR, and these flags exposing
implementation details are no longer necessary.
Linus Torvalds [Fri, 11 Jun 2021 17:07:50 +0000 (10:07 -0700)]
Merge tag 'hwmon-for-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fixes for tps23861, scpi-hwmon, and corsair-psu drivers, plus a
bindings fix for TI ADS7828"
* tag 'hwmon-for-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (tps23861) correct shunt LSB values
hwmon: (tps23861) set current shunt value
hwmon: (tps23861) define regmap max register
hwmon: (scpi-hwmon) shows the negative temperature properly
hwmon: (corsair-psu) fix suspend behavior
dt-bindings: hwmon: Fix typo in TI ADS7828 bindings
Linus Torvalds [Fri, 11 Jun 2021 17:02:30 +0000 (10:02 -0700)]
Merge tag 'mmc-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes to the Renesas SDHI driver:
- Fix HS400 on R-Car M3-W+
- Abort tuning when timeout detected"
* tag 'mmc-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+
mmc: renesas_sdhi: abort tuning when timeout detected
tools headers cpufeatures: Sync with the kernel sources
To pick the changes in:
5b95998d2e396cc7 ("x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]") 794df85bb55d23dc ("x86/cpufeatures: Add Intel SGX hardware bits") 127eee6cd085ddbb ("x86/cpufeatures: Mark ENQCMD as disabled when configured out")
That don't cause any change in the tools, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Borislav Petkov <bp@suse.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Sat, 5 Jun 2021 05:29:57 +0000 (13:29 +0800)]
perf session: Correct buffer copying when peeking events
When peeking an event, it has a short path and a long path. The short
path uses the session pointer "one_mmap_addr" to directly fetch the
event; and the long path needs to read out the event header and the
following event data from file and fill into the buffer pointer passed
through the argument "buf".
The issue is in the long path that it copies the event header and event
data into the same destination address which pointer "buf", this means
the event header is overwritten. We are just lucky to run into the
short path in most cases, so we don't hit the issue in the long path.
This patch adds the offset "hdr_sz" to the pointer "buf" when copying
the event data, so that it can reserve the event header which can be
used properly by its caller.
Fixes: 046b7bd2cb0d ("perf session: Add perf_session__peek_event()") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210605052957.1070720-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'usb-serial-5.13-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.13-rc6
Here are two fixes for the cp210x driver. The first fixes a regression
with early revisions of the CP2102N which specifically broke some ESP32
development boards. The second makes sure that the pin configuration is
detected properly also for the CP2102N QFN20 package.
Both have been in linux-next over night and with no reported issues.
* tag 'usb-serial-5.13-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cp210x: fix CP2102N-A01 modem control
USB: serial: cp210x: fix alternate function for CP2102N QFN20
Turns out this breaks the build. We had numerous reports of problems
from linux-next and 0-day about this not working properly, so revert it
for now until it can be figured out properly.
The build errors are:
arm-linux-gnueabi-ld: fsl_udc_core.c:(.text+0x29d4): undefined reference to `fsl_udc_clk_finalize'
arm-linux-gnueabi-ld: fsl_udc_core.c:(.text+0x2ba8): undefined reference to `fsl_udc_clk_release'
fsl_udc_core.c:(.text+0x2848): undefined reference to `fsl_udc_clk_init'
fsl_udc_core.c:(.text+0xe88): undefined reference to `fsl_udc_clk_release'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Fixes: 7756d0f5a2ab ("usb: gadget: fsl: Re-enable driver for ARM SoCs") Cc: stable <stable@vger.kernel.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Leo Li <leoyang.li@nxp.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
while the rewrite can only handle JMP/CALL to the thunks. The result
is the alternative wrecking the code. Make sure to skip writing the
alternatives for conditional branches.
Xiao Ni [Fri, 28 May 2021 06:16:38 +0000 (14:16 +0800)]
async_xor: check src_offs is not NULL before updating it
When PAGE_SIZE is greater than 4kB, multiple stripes may share the same
page. Thus, src_offs is added to async_xor_offs() with array of offsets.
However, async_xor() passes NULL src_offs to async_xor_offs(). In such
case, src_offs should not be updated. Add a check before the update.
Fixes: 09f7aafc70b1(async_xor: increase src_offs when dropping destination page) Cc: stable@vger.kernel.org # v5.10+ Reported-by: Oleksandr Shchirskyi <oleksandr.shchirskyi@linux.intel.com> Tested-by: Oleksandr Shchirskyi <oleksandr.shchirskyi@intel.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org>
Dave Airlie [Fri, 11 Jun 2021 01:17:09 +0000 (11:17 +1000)]
Merge tag 'amd-drm-fixes-5.13-2021-06-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.13-2021-06-09:
amdgpu:
- Use kvzmalloc in amdgu_bo_create
- Use drm_dbg_kms for reporting failure to get a GEM FB
- Fix some register offsets for Sienna Cichlid
- Fix fall-through warning
Dave Airlie [Fri, 11 Jun 2021 00:59:49 +0000 (10:59 +1000)]
Merge tag 'drm-misc-fixes-2021-06-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One fix for snu4i that prevents it from probing, two locking fixes for
ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to
prevent an out-of-bounds access.
Jisheng Zhang [Mon, 10 May 2021 16:28:38 +0000 (00:28 +0800)]
riscv: code patching only works on !XIP_KERNEL
Some features which need code patching such as KPROBES, DYNAMIC_FTRACE
KGDB can only work on !XIP_KERNEL. Add dependencies for these features
that rely on code patching.
Vitaly Wool [Mon, 31 May 2021 08:53:42 +0000 (11:53 +0300)]
riscv: xip: support runtime trap patching
RISCV_ERRATA_ALTERNATIVE patches text at runtime which is currently
not possible when the kernel is executed from the flash in XIP mode.
Since runtime patching concerns only traps at the moment, let's just
have all the traps reside in RAM anyway if RISCV_ERRATA_ALTERNATIVE
is set. Thus, these functions will be patch-able even when the .text
section is in flash.
Pavel Begunkov [Thu, 10 Jun 2021 15:37:38 +0000 (16:37 +0100)]
io_uring: add feature flag for rsrc tags
Add IORING_FEAT_RSRC_TAGS indicating that io_uring supports a bunch of
new IORING_REGISTER operations, in particular
IORING_REGISTER_[FILES[,UPDATE]2,BUFFERS[2,UPDATE]] that support rsrc
tagging, and also indicating implemented dynamic fixed buffer updates.
Pavel Begunkov [Thu, 10 Jun 2021 15:37:37 +0000 (16:37 +0100)]
io_uring: change registration/upd/rsrc tagging ABI
There are ABI moments about recently added rsrc registration/update and
tagging that might become a nuisance in the future. First,
IORING_REGISTER_RSRC[_UPD] hide different types of resources under it,
so breaks fine control over them by restrictions. It works for now, but
once those are wanted under restrictions it would require a rework.
It was also inconvenient trying to fit a new resource not supporting
all the features (e.g. dynamic update) into the interface, so better
to return to IORING_REGISTER_* top level dispatching.
Second, register/update were considered to accept a type of resource,
however that's not a good idea because there might be several ways of
registration of a single resource type, e.g. we may want to add
non-contig buffers or anything more exquisite as dma mapped memory.
So, remove IORING_RSRC_[FILE,BUFFER] out of the ABI, and place them
internally for now to limit changes.
Olivier Langlois has been struggling with coredumps being incompletely written in
processes using io_uring.
Olivier Langlois <olivier@trillion01.com> writes:
> io_uring is a big user of task_work and any event that io_uring made a
> task waiting for that occurs during the core dump generation will
> generate a TIF_NOTIFY_SIGNAL.
>
> Here are the detailed steps of the problem:
> 1. io_uring calls vfs_poll() to install a task to a file wait queue
> with io_async_wake() as the wakeup function cb from io_arm_poll_handler()
> 2. wakeup function ends up calling task_work_add() with TWA_SIGNAL
> 3. task_work_add() sets the TIF_NOTIFY_SIGNAL bit by calling
> set_notify_signal()
The coredump code deliberately supports being interrupted by SIGKILL,
and depends upon prepare_signal to filter out all other signals. Now
that signal_pending includes wake ups for TIF_NOTIFY_SIGNAL this hack
in dump_emitted by the coredump code no longer works.
Make the coredump code more robust by explicitly testing for all of
the wakeup conditions the coredump code supports. This prevents
new wakeup conditions from breaking the coredump code, as well
as fixing the current issue.
The filesystem code that the coredump code uses already limits
itself to only aborting on fatal_signal_pending. So it should
not develop surprising wake-up reasons either.
v2: Don't remove the now unnecessary code in prepare_signal.
Cc: stable@vger.kernel.org Fixes: f64150391a51 ("entry: Add support for TIF_NOTIFY_SIGNAL") Reported-by: Olivier Langlois <olivier@trillion01.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 10 Jun 2021 19:01:22 +0000 (12:01 -0700)]
Merge branch 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"This is a high priority but low risk fix for a cgroup1 bug where
rename(2) can change a cgroup's name to something which can break
parsing of /proc/PID/cgroup"
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup1: don't allow '\n' in renaming
Bjorn Andersson [Thu, 10 Jun 2021 00:21:32 +0000 (17:21 -0700)]
usb: typec: mux: Fix copy-paste mistake in typec_mux_match
Fix the copy-paste mistake in the return path of typec_mux_match(),
where dev is considered a member of struct typec_switch rather than
struct typec_mux.
The two structs are identical in regards to having the struct device as
the first entry, so this provides no functional change.
Fixes: 02aee09b5386 ("usb: typec: Registering real device entries for the muxes") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210610002132.3088083-1-bjorn.andersson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mayank Rana [Wed, 9 Jun 2021 07:35:35 +0000 (00:35 -0700)]
usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path
If ucsi_init() fails for some reason (e.g. ucsi_register_port()
fails or general communication failure to the PPM), particularly at
any point after the GET_CAPABILITY command had been issued, this
results in unwinding the initialization and returning an error.
However the ucsi structure's ucsi_capability member retains its
current value, including likely a non-zero num_connectors.
And because ucsi_init() itself is done in a workqueue a UCSI
interface driver will be unaware that it failed and may think the
ucsi_register() call was completely successful. Later, if
ucsi_unregister() is called, due to this stale ucsi->cap value it
would try to access the items in the ucsi->connector array which
might not be in a proper state or not even allocated at all and
results in NULL or invalid pointer dereference.
Fix this by clearing the ucsi->cap value to 0 during the error
path of ucsi_init() in order to prevent a later ucsi_unregister()
from entering the connector cleanup loop.
Fixes: 2e30c7816331 ("usb: typec: Add support for UCSI interface") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210609073535.5094-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Stanley [Thu, 10 Jun 2021 03:49:57 +0000 (13:19 +0930)]
usb: gadget: fsl: Re-enable driver for ARM SoCs
The commit dadd7e952f53 ("usb: gadget: fsl_mxc_udc: Remove the driver")
dropped the ARCH_MXC dependency from USB_FSL_USB2, leaving it depending
solely on FSL_SOC.
FSL_SOC is powerpc only; it was briefly available on ARM in 2014 but was
removed by commit 8c8267019e49 ("ARM: imx: temporarily remove
CONFIG_SOC_FSL from LS1021A"). Therefore the driver can no longer be
enabled on ARM platforms.
This appears to be a mistake as arm64's ARCH_LAYERSCAPE and arm32
SOC_LS1021A SoCs use this symbol. It's enabled in these defconfigs:
Andy Shevchenko [Wed, 9 Jun 2021 17:22:02 +0000 (20:22 +0300)]
usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
As LKP noticed the Sparse is not happy about strict type handling:
.../typec/tcpm/wcove.c:380:50: sparse: expected unsigned short [usertype] header
.../typec/tcpm/wcove.c:380:50: sparse: got restricted __le16 const [usertype] header
Fix this by switching to use pd_header_cnt_le() instead of pd_header_cnt()
in the affected code.
Fixes: b879e49658b1 ("usb: typec: Group all TCPCI/TCPM code together") Fixes: 7eb439598b34 ("usb: typec: wcove: start using tcpm for USB PD support") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210609172202.83377-1-andriy.shevchenko@linux.intel.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 10 Jun 2021 17:53:04 +0000 (10:53 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A mixture of small bug fixes and a small security issue:
- WARN_ON when IPoIB is automatically moved between namespaces
- Long standing bug where mlx5 would use the wrong page for the
doorbell recovery memory if fork is used
- Security fix for mlx4 that disables the timestamp feature
- Several crashers for mlx5
- Plug a recent mlx5 memory leak for the sig_mr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix initializing CQ fragments buffer
RDMA/mlx5: Delete right entry from MR signature database
RDMA: Verify port when creating flow rule
RDMA/mlx5: Block FDB rules when not in switchdev mode
RDMA/mlx4: Do not map the core_clock page to user space unless enabled
RDMA/mlx5: Use different doorbell memory for different processes
RDMA/ipoib: Fix warning caused by destroying non-initial netns
Robert Marko [Wed, 9 Jun 2021 22:07:27 +0000 (00:07 +0200)]
hwmon: (tps23861) set current shunt value
TPS23861 has a configuration bit for setting of the
current shunt value used on the board.
Its bit 0 of the General Mask 1 register.
According to the datasheet bit values are:
0 for 255 mOhm (Default)
1 for 250 mOhm
So, configure the bit before registering the hwmon
device according to the value passed in the DTS or
default one if none is passed.
This caused potentially reading slightly skewed values
due to max current value being 1.02A when 250mOhm shunt
is used instead of 1.0A when 255mOhm is used.
Robert Marko [Wed, 9 Jun 2021 22:07:26 +0000 (00:07 +0200)]
hwmon: (tps23861) define regmap max register
Define the max register address the device supports.
This allows reading the whole register space via
regmap debugfs, without it only register 0x0 is visible.
Takashi Iwai [Thu, 10 Jun 2021 15:20:59 +0000 (17:20 +0200)]
ALSA: seq: Fix race of snd_seq_timer_open()
The timer instance per queue is exclusive, and snd_seq_timer_open()
should have managed the concurrent accesses. It looks as if it's
checking the already existing timer instance at the beginning, but
it's not right, because there is no protection, hence any later
concurrent call of snd_seq_timer_open() may override the timer
instance easily. This may result in UAF, as the leftover timer
instance can keep running while the queue itself gets closed, as
spotted by syzkaller recently.
For avoiding the race, add a proper check at the assignment of
tmr->timeri again, and return -EBUSY if it's been already registered.
Johan Hovold [Wed, 9 Jun 2021 16:15:09 +0000 (18:15 +0200)]
USB: serial: cp210x: fix CP2102N-A01 modem control
CP2102N revision A01 (firmware version <= 1.0.4) has a buggy
flow-control implementation that uses the ulXonLimit instead of
ulFlowReplace field of the flow-control settings structure (erratum
CP2102N_E104).
A recent change that set the input software flow-control limits
incidentally broke RTS control for these devices when CRTSCTS is not set
as the new limits would always enable hardware flow control.
Fix this by explicitly disabling flow control for the buggy firmware
versions and only updating the input software flow-control limits when
IXOFF is requested. This makes sure that the terminal settings matches
the default zero ulXonLimit (ulFlowReplace) for these devices.
Link: https://lore.kernel.org/r/20210609161509.9459-1-johan@kernel.org Reported-by: David Frey <dpfrey@gmail.com> Reported-by: Alex Villacís Lasso <a_villacis@palosanto.com> Tested-by: Alex Villacís Lasso <a_villacis@palosanto.com> Fixes: ec17d24d6def ("USB: serial: cp210x: set IXOFF thresholds") Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Johan Hovold <johan@kernel.org>
Stephen Boyd [Tue, 8 Jun 2021 19:55:19 +0000 (12:55 -0700)]
drm/msm/dsi: Stash away calculated vco frequency on recalc
A problem was reported on CoachZ devices where the display wouldn't come
up, or it would be distorted. It turns out that the PLL code here wasn't
getting called once dsi_pll_10nm_vco_recalc_rate() started returning the
same exact frequency, down to the Hz, that the bootloader was setting
instead of 0 when the clk was registered with the clk framework.
After commit 33ade3c1a231 ("drm/msm/dsi: remove temp data from global
pll structure") we use a hardcoded value for the parent clk frequency,
i.e. VCO_REF_CLK_RATE, and we also hardcode the value for FRAC_BITS,
instead of getting it from the config structure. This combination of
changes to the recalc function allows us to properly calculate the
frequency of the PLL regardless of whether or not the PLL has been
clk_prepare()d or clk_set_rate()d. That's a good improvement.
Unfortunately, this means that now we won't call down into the PLL clk
driver when we call clk_set_rate() because the frequency calculated in
the framework matches the frequency that is set in hardware. If the rate
is the same as what we want it should be OK to not call the set_rate PLL
op. The real problem is that the prepare op in this driver uses a
private struct member to stash away the vco frequency so that it can
call the set_rate op directly during prepare. Once the set_rate op is
never called because recalc_rate told us the rate is the same, we don't
set this private struct member before the prepare op runs, so we try to
call the set_rate function directly with a frequency of 0. This
effectively kills the PLL and configures it for a rate that won't work.
Calling set_rate from prepare is really quite bad and will confuse any
downstream clks about what the rate actually is of their parent. Fixing
that will be a rather large change though so we leave that to later.
For now, let's stash away the rate we calculate during recalc so that
the prepare op knows what frequency to set, instead of 0. This way
things keep working and the display can enable the PLL properly. In the
future, we should remove that code from the prepare op so that it
doesn't even try to call the set rate function.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Fixes: 33ade3c1a231 ("drm/msm/dsi: remove temp data from global pll structure") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210608195519.125561-1-swboyd@chromium.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Alaa Hleihel [Thu, 10 Jun 2021 07:34:27 +0000 (10:34 +0300)]
IB/mlx5: Fix initializing CQ fragments buffer
The function init_cq_frag_buf() can be called to initialize the current CQ
fragments buffer cq->buf, or the temporary cq->resize_buf that is filled
during CQ resize operation.
However, the offending commit started to use function get_cqe() for
getting the CQEs, the issue with this change is that get_cqe() always
returns CQEs from cq->buf, which leads us to initialize the wrong buffer,
and in case of enlarging the CQ we try to access elements beyond the size
of the current cq->buf and eventually hit a kernel panic.
Aharon Landau [Thu, 10 Jun 2021 07:34:26 +0000 (10:34 +0300)]
RDMA/mlx5: Delete right entry from MR signature database
The value mr->sig is stored in the entry upon mr allocation, however, ibmr
is wrongly entered here as "old", therefore, xa_cmpxchg() does not replace
the entry with NULL, which leads to the following trace:
Maor Gottlieb [Thu, 10 Jun 2021 07:34:25 +0000 (10:34 +0300)]
RDMA: Verify port when creating flow rule
Validate port value provided by the user and with that remove no longer
needed validation by the driver. The missing check in the mlx5_ib driver
could cause to the below oops.
This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'
The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.
An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.
Peter Zijlstra [Mon, 7 Jun 2021 09:45:58 +0000 (11:45 +0200)]
objtool: Fix .symtab_shndx handling for elf_create_undef_symbol()
When an ELF object uses extended symbol section indexes (IOW it has a
.symtab_shndx section), these must be kept in sync with the regular
symbol table (.symtab).
So for every new symbol we emit, make sure to also emit a
.symtab_shndx value to keep the arrays of equal size.
Note: since we're writing an UNDEF symbol, most GElf_Sym fields will
be 0 and we can repurpose one (st_size) to host the 0 for the xshndx
value.
Fixes: 34ce688a39e9 ("objtool: Add elf_create_undef_symbol()") Reported-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Fangrui Song <maskray@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lkml.kernel.org/r/YL3q1qFO9QIRL/BA@hirez.programming.kicks-ass.net
CodyYao-oc [Mon, 7 Jun 2021 02:53:35 +0000 (10:53 +0800)]
x86/nmi_watchdog: Fix old-style NMI watchdog regression on old Intel CPUs
The following commit:
0ebb87d96a8a ("x86/perf: Add hardware performance events support for Zhaoxin CPU.")
Got the old-style NMI watchdog logic wrong and broke it for basically every
Intel CPU where it was active. Which is only truly old CPUs, so few people noticed.
On CPUs with perf events support we turn off the old-style NMI watchdog, so it
was pretty pointless to add the logic for X86_VENDOR_ZHAOXIN to begin with ... :-/
Anyway, the fix is to restore the old logic and add a 'break'.
[ mingo: Wrote a new changelog. ]
Fixes: 0ebb87d96a8a ("x86/perf: Add hardware performance events support for Zhaoxin CPU.") Signed-off-by: CodyYao-oc <CodyYao-oc@zhaoxin.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210607025335.9643-1-CodyYao-oc@zhaoxin.com
projects / kernel.git / log