Evan Quan [Sat, 9 May 2020 05:49:26 +0000 (13:49 +0800)]
drm/amd/powerplay: shutdown on HW CTF
To prevent further damage.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Sat, 9 May 2020 05:26:00 +0000 (13:26 +0800)]
drm/amd/powerplay: try to do a graceful shutdown on SW CTF
Normally this(SW CTF) should not happen. And by doing graceful
shutdown we can prevent further damage.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 14 May 2020 01:33:09 +0000 (11:33 +1000)]
Merge tag 'drm-intel-next-2020-04-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Fix GitLab #1698: Performance regression with Linux 5.7-rc1 on
Iris Plus 655 and 4K screen (Chris)
- Add Wa_14011059788 for Tigerlake (Matt A)
- Add per ctx batchbuffer wa for timestamp for Gen12 (Mika)
- Use indirect ctx bb to load cmd buffer control value
from context image to avoid corruption (Mika)
- Enable DP Display Audio WA (Uma, Jani)
- Update forcewake firmware ranges for Icelake (Radhakrishna)
- Add missing deinitialization cases of load failure for display (Jose)
- Implement TC cold sequences for Icelake and Tigerlake (Jose)
- Unbreak enable_dpcd_backlight modparam (Lyude)
- Move the late flush_submission in retire to the end (Chris)
- Demote "Reducing compressed framebufer size" message to info (Peter)
- Push MST link retraining to the hotplug work (Ville)
- Hold obj->vma.lock over for_each_ggtt_vma() (Chris)
- Fix timeout handling during TypeC AUX power well enabling for ICL (Imre)
- Fix skl+ non-scaled pfit modes (Ville)
- Prefer soft-rc6 over RPS DOWN_TIMEOUT (Chris)
- Sanitize GT first before poisoning HWSP (Chris)
- Fix up clock RPS frequency readout (Chris)
- Avoid reusing the same logical CCID (Chris)
- Avoid dereferencing a dead context (Chris)
- Always enable busy-stats for execlists (Chris)
- Apply the aggressive downclocking to parking (Chris)
- Restore aggressive post-boost downclocking (Chris)
- Scrub execlists state on resume (Chris)
- Add debugfs attributes for LPSP (Ansuman)
- Improvements to kernel selftests (Chris, Mika)
- Add tiled blits selftest (Zbigniew)
- Fix error handling in __live_lrc_indirect_ctx_bb() (Dan)
- Add pre/post plane updates for SAGV (Stanislav)
- Add ICL PG3 PW ID for EHL (Anshuman)
- Fix Sphinx build duplicate label warning (Jani)
- Error log non-zero audio power refcount after unbind (Jani)
- Remove object_is_locked assertion from unpin_from_display_plane (Chris)
- Use single set of AUX powerwell ops for gen11+ (Matt R)
- Prefer drm_WARN_ON over WARN_ON (Pankaj)
- Poison residual state [HWSP] across resume (Chris, Tvrtko)
- Convert request-before-CS assertion to debug (Chris)
- Carefully order virtual_submission_tasklet (Chris)
- Check carefully for an idle engine in wait-for-idle (Chris)
- Only close vma we open (Chris)
- Trace RPS events (Chris)
- Use the RPM config register to determine clk frequencies (Chris)
- Drop rq->ring->vma peeking from error capture (Chris)
- Check preempt-timeout target before submit_ports (Chris)
- Check HWSP cacheline is valid before acquiring (Chris)
- Use proper fault mask in interrupt postinstall too (Matt R)
- Keep a no-frills swappable copy of the default context state (Chris)
- Add atomic helpers for bandwidth (Stanislav)
- Refactor setting dma info to a common helper from device info (Michael)
- Refactor DDI transcoder code for clairty (Ville)
- Extend PG3 power well ID to ICL (Anshuman)
- Refactor PFIT code for readability and future extensibility (Ville)
- Clarify code split between intel_ddi.c and intel_dp.c (Ville)
- Move out code to return the digital_port of the aux ch (Jose)
- Move rps.enabled/active and use of RPS interrupts to flags (Chris)
- Remove superfluous inlines and dead code (Jani)
- Re-disable -Wframe-address from top-level Makefile (Nick)
- Static checker and spelling fixes (Colin, Nathan)
- Split long lines (Ville)
drm: rcar-du: Set primary plane zpos immutably at initializing
According to drm_plane_create_zpos_property() function documentation,
all planes zpos range should be set if zpos property is supported.
However, the rcar-du driver didn't set primary plane zpos range. Since
the primary plane's zpos is fixed, set it immutably.
Reported-by: Yoshihito Ogawa <yoshihito.ogawa.kc@renesas.com> Reported-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Tomohito Esaki <etom@igel.co.jp> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Stone <daniels@collabora.com>
[Turn continue into if ... else ...] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
drm: plane: Verify that no or all planes have a zpos property
The zpos property is used by userspace to sort the order of planes.
While the property is not mandatory for drivers to implement, mixing
planes with and without zpos confuses userspace, and shall not be
allowed. Clarify this in the documentation and warn at runtime if the
drivers mixes planes with and without zpos properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm: panels: Add MAINTAINERS entry for LVDS panel driver
As the DRM LVDS panel driver uses a different approach to DT bindings
compared to what Thierry Reding advocates, add a specific MAINTAINERS
entry to avoid bothering Thierry with requests related to that driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
dt-bindings: display: bridge: Convert simple-bridge bindings to YAML
The simple-bridge driver supports multiple simple or dumb bridges,
covered by different compatible strings but otherwise identical DT
bindings. Some of those bridges have undocumented bindings, while others
are documented in text form in separate files. Group them all in a
single binding and convert it to YAML.
The psave-gpios property of the adi,adv7123 is dropped, as it isn't
supported by the driver and isn't specified in any DT file upstream.
Support for power saving is available through the enable-gpios property
that should cover all the needs of the ADV7123 (as the device only has a
/PSAVE pin and no enable pin).
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org>
dt-bindings: display: bridge: Reject additional properties in ports node
Document the #address-cells and #size-cells properties of the ports node
in the schemas of the bridge DT bindings, and set additionalProperties
to false to reject additional properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
Jason Yan [Sat, 9 May 2020 06:29:59 +0000 (14:29 +0800)]
drm/amd/amdgpu: remove defined but not used 'crtc_offsets'
Fix the following gcc warning:
drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c:65:18: warning: ‘crtc_offsets’
defined but not used [-Wunused-const-variable=]
static const u32 crtc_offsets[6] =
^~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For MST case: when update_config is called to disable a stream,
this clears the settings for all the streams on that link.
We should only clear the settings for the stream that was disabled.
[How]
Clear the settings after the call to remove display is called.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Sun, 10 May 2020 11:04:41 +0000 (07:04 -0400)]
drm/amd/amdgpu: Add missing GRBM bits for GFX 10.1
Requested bits for UMR support
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Thu, 7 May 2020 12:35:40 +0000 (08:35 -0400)]
drm/amd/amdgpu: add raven1 part to the gfxoff quirk list
On my raven1 system (rev c6) with VBIOS 113-RAVEN-114 GFXOFF is
not stable (resulting in large block tiling noise in some applications).
Disabling GFXOFF via the quirk list fixes the problems for me.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jane Jian [Sat, 9 May 2020 05:16:26 +0000 (13:16 +0800)]
drm/amd/powerplay: skip judging if baco support for Arcturus sriov
since for sriov, baco happens on host side, no need and meaning
to judge is baco.
also, since kiq reads strap0 in here, if kiq is not ready
or gpu reset(kiq resume) happens after this read, would fail
to read and wrongly set baco as true(1).
Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 7 May 2020 14:04:04 +0000 (10:04 -0400)]
drm/amdgpu: fix runpm logic in amdgpu_pmops_resume
We should be checking whether the driver enabled runtime pm
rather than whether the asic supports BOCO or BACO. That said
in general they are equivalent unless the user has disabled
runpm or it has been disabled for a specific asic.
Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 8 May 2020 18:33:09 +0000 (14:33 -0400)]
drm/amdgpu: implement soft_recovery for gfx10
Same as gfx9. This allows us to kill the waves for hung
shaders.
Acked-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Thu, 7 May 2020 19:34:41 +0000 (21:34 +0200)]
drm/amdgpu: cleanup sysfs file handling
Create sysfs file using attributes.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 7 May 2020 10:17:55 +0000 (18:17 +0800)]
drm/amdgpu: enable hibernate support on Navi1X
BACO is needed to support hibernate on Navi1X.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Mon, 4 May 2020 12:50:32 +0000 (20:50 +0800)]
drm/amdgpu: switch to common ras ta helper
TRIGGER_ERROR is common ras ta command for all the
ASICs that support RAS feature. switch to common helper
to avoid duplicate implementation per IP generation
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: John Clements <john.clements@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Mon, 4 May 2020 11:39:24 +0000 (19:39 +0800)]
drm/amdgpu: switch to common xgmi ta helpers
get_hive_id/get_node_id/get_topology_info/set_topology_info
are common xgmi command supported by TA for all the ASICs
that support xgmi link. They should be implemented as common
helper functions to avoid duplicated code per IP generation
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: John Clements <john.clements@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 8 May 2020 05:16:36 +0000 (15:16 +1000)]
Merge tag 'drm-misc-next-2020-05-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.8:
UAPI Changes:
Cross-subsystem Changes:
* MAINTAINERS: restore alphabetical order; update cirrus driver
* Dcomuentation: document visionix, chronteli, ite vendor prefices; update
documentation for Chrontel CH7033, IT6505, IVO, BOE,
Panasonic, Chunghwa, AUO bindings; convert dw_mipi_dsi.txt
to YAML; remove todo item for drm_display_mode.hsync removal;
Core Changes:
* drm: add devm_drm_dev_alloc() for managed allocations of drm_device;
use DRM_MODESET_LOCK_ALL_*() in mode-object code; remove
drm_display_mode.hsync; small cleanups of unused variables,
compiler warnings and static functions
* drm/client: dual-lincensing: GPL-2.0 or MIT
* drm/mm: optimize tree searches in rb_hole_addr()
Driver Changes:
* drm/{many}: use devm_drm_dev_alloc(); don't use drm_device.dev_private
* drm/ast: don't double-assign to drm_crtc_funcs.set_config; drop
drm_connector_register()
* drm/bochs: drop drm_connector_register()
* drm/bridge: add support for Chrontel ch7033; fix stack usage with
old gccs; return error pointer in drm_panel_bridge_add()
* drm/cirrus: Move to tiny
* drm/dp_mst: don't use 2nd sideband tx slot; revert "Remove single tx
msg restriction"
* drm/lima: support runtime PM;
* drm/meson: limit modes wrt chipset
* drm/panel: add support for Visionox rm69299; fix clock on
boe-tv101wum-n16; fix panel type for AUO G101EVN10;
add support for Ivo M133NFW4 R0; add support for BOE
NV133FHM-N61; add support for AUO G121EAN01.4, G156XTN01.0,
G190EAN01
* drm/pl111: improve vexpress init; fix module auto-loading
* drm/stm: read number of endpoints from device tree
* drm/vboxvideo: use managed PCI functions; drop DRM_MTRR_WC
* drm/vkms: fix use-after-free in vkms_gem_create(); enable cursor
support by default
* fbdev: use boolean values in several drivers
* fbdev/controlfb: fix COMPILE_TEST
* fbdev/w100fb: fix double-free bug
Chunming Zhou [Thu, 7 May 2020 02:02:21 +0000 (10:02 +0800)]
MAINTAINERS: Remove me from amdgpu maintainers
Glad to spend time on kernel driver in past years.
I've moved to new focus in umd and couldn't commit
enough time to discussions.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bernard Zhao [Thu, 7 May 2020 09:13:05 +0000 (02:13 -0700)]
drm/amd/amdgpu: cleanup coding style a bit
There is DEVICE_ATTR mechanism in separate attribute define.
So this change is to use attr array, also use
sysfs_create_files in init function & sysfs_remove_files in
fini function.
This maybe make the code a bit readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Changes since V1:
*Use DEVICE_ATTR mechanism
Link for V1:
*https://lore.kernel.org/patchwork/patch/1228076/
V2: make array const to fix build errors
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simon Ser [Mon, 30 Mar 2020 09:23:21 +0000 (09:23 +0000)]
drm/amd/display: add basic atomic check for cursor plane
This patch adds a basic cursor check when an atomic test-only commit is
performed. The position and size of the cursor plane is checked.
This should fix user-space relying on atomic checks to assign buffers to
planes.
Signed-off-by: Simon Ser <contact@emersion.fr> Reported-by: Roman Gilg <subdiff@gmail.com>
References: https://github.com/emersion/libliftoff/issues/46 Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix vblank and pageflip event handling for FreeSync
[Why]
We're sending the drm vblank event a frame too early in the case where
the pageflip happens close to VUPDATE and ends up blocking the signal.
The implementation in DM was previously correct *before* we started
sending vblank events from VSTARTUP unconditionally to handle cases
where HUBP was off, OTG was ON and userspace was still requesting some
DRM planes enabled. As part of that patch series we dropped VUPDATE
since it was deemed close enough to VSTARTUP, but there's a key
difference betweeen VSTARTUP and VUPDATE - the VUPDATE signal can be
blocked if we're holding the pipe lock.
There was a fix recently to revert the unconditional behavior for the
DCN VSTARTUP vblank event since it was sending the pageflip event on
the wrong frame - once again, due to blocking VUPDATE and having the
address start scanning out two frames later.
The problem with this fix is it didn't update the logic that calls
drm_crtc_handle_vblank(), so the timestamps are totally bogus now.
[How]
Essentially reverts most of the original VSTARTUP series but retains
the behavior to send back events when active planes == 0.
Some refactoring/cleanup was done to not have duplicated code in both
the handlers.
Fixes: 833776a3d0ce ("drm/amd/display: Send vblank and user events at vsartup for DCN") Fixes: d5ac8e8f75dd ("drm/amd/display: Disable VUpdate interrupt for DCN hardware") Fixes: fdd2c7ca8544 ("drm/amd/display: Fix pageflip event race condition for DCN.") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Sat, 21 Mar 2020 20:37:40 +0000 (17:37 -0300)]
drm/vkms: enable cursor by default
This patch proposes a change in the behavior of the cursor to enable it as
soon as the vkms module is added. Enabling the cursor by default appears
to be an expected and more friendly behavior, especially when running IGT
tests.
Felix Kuehling [Tue, 5 May 2020 18:02:43 +0000 (14:02 -0400)]
drm/amdgpu: Use GEM obj reference for KFD BOs
Releasing the AMDGPU BO ref directly leads to problems when BOs were
exported as DMA bufs. Releasing the GEM reference makes sure that the
AMDGPU/TTM BO is not freed too early.
Also take a GEM reference when importing BOs from DMABufs to keep
references to imported BOs balances properly.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Sierra <alex.sierra@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 30 Apr 2020 06:38:39 +0000 (14:38 +0800)]
drm/amd/powerplay: perform PG ungate prior to CG ungate
Since gfxoff should be disabled first before trying to access those
GC registers.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 30 Apr 2020 03:24:02 +0000 (11:24 +0800)]
drm/amdgpu: drop unnecessary cancel_delayed_work_sync on PG ungate
As this is already properly handled in amdgpu_gfx_off_ctrl(). In fact,
this unnecessary cancel_delayed_work_sync may leave a small time window
for race condition and is dangerous.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 30 Apr 2020 03:15:19 +0000 (11:15 +0800)]
drm/amdgpu: disable MGCG/MGLS also on gfx CG ungate
Otherwise, MGCG/MGLS will be left enabled.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 31 Jan 2020 13:58:05 +0000 (14:58 +0100)]
drm/amdgpu: use the BAR if possible in amdgpu_device_vram_access v2
This should speed up debugging VRAM access a lot.
v2: add HDP flush/invalidate
Unrevert: RAS issue at root of the issue has been addressed
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Jonathan Kim <Jonathan.Kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add dm support for DP 1.4 Compliance edid corruption test
It works together with drm framework
"drm: Add support for DP 1.4 Compliance edid corruption test"
Add the edid validity check scenario when edid base block is read back
with error. Send back real edid checksum and enable fail-safe mode in DC.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
video: fbdev: w100fb: Fix a potential double free.
Some memory is vmalloc'ed in the 'w100fb_save_vidmem' function and freed in
the 'w100fb_restore_vidmem' function. (these functions are called
respectively from the 'suspend' and the 'resume' functions)
However, it is also freed in the 'remove' function.
In order to avoid a potential double free, set the corresponding pointer
to NULL once freed in the 'w100fb_restore_vidmem' function.
Jason Yan [Wed, 22 Apr 2020 07:18:54 +0000 (15:18 +0800)]
fbdev: aty: use true, false for bool variables in atyfb_base.c
Fix the following coccicheck warning:
drivers/video/fbdev/aty/atyfb_base.c:3822:3-10: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/aty/atyfb_base.c:3824:3-9: WARNING: Assignment of
0/1 to bool variable
Jason Yan [Wed, 22 Apr 2020 07:18:45 +0000 (15:18 +0800)]
video: uvesafb: use true,false for bool variables
Fix the following coccicheck warning:
drivers/video/fbdev/uvesafb.c:48:12-17: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1827:3-13: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1829:3-13: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1835:3-9: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1837:3-9: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1839:3-8: WARNING: Assignment of 0/1 to
bool variable
Jason Yan [Wed, 22 Apr 2020 07:18:36 +0000 (15:18 +0800)]
video: udlfb: use true,false for bool variables
Fix the following coccicheck warning:
drivers/video/fbdev/udlfb.c:67:12-19: WARNING: Assignment of 0/1 to bool
variable
drivers/video/fbdev/udlfb.c:68:12-20: WARNING: Assignment of 0/1 to bool
variable
drivers/video/fbdev/udlfb.c:69:12-18: WARNING: Assignment of 0/1 to bool
variable
Jason Yan [Wed, 22 Apr 2020 07:18:26 +0000 (15:18 +0800)]
video: fbdev: i810: use true,false for bool variables
Fix the following coccicheck warning:
drivers/video/fbdev/i810/i810_main.c:1969:3-7: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1971:3-8: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1973:3-9: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1975:3-7: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:2001:3-9: WARNING: Assignment of
0/1 to bool variable
Arnd Bergmann [Tue, 5 May 2020 14:01:52 +0000 (16:01 +0200)]
drm/amdgpu: allocate large structures dynamically
After the structure was padded to 1024 bytes, it is no longer
suitable for being a local variable, as the function surpasses
the warning limit for 32-bit architectures:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:587:5: error: stack frame size of 1072 bytes in function 'amdgpu_ras_feature_enable' [-Werror,-Wframe-larger-than=]
int amdgpu_ras_feature_enable(struct amdgpu_device *adev,
^
Use kzalloc() instead to get it from the heap.
Fixes: d38b8fedb9b4 ("drm/amdgpu: update RAS TA to Host interface") Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Avoid integer overflow in amdgpu_device_suspend_display_audio
When building with Clang:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4160:53: warning: overflow in
expression; result is -294967296 with type 'long' [-Winteger-overflow]
expires = ktime_get_mono_fast_ns() + NSEC_PER_SEC * 4L;
^
1 warning generated.
Multiplication happens first due to order of operations and both
NSEC_PER_SEC and 4 are long literals so the expression overflows. To
avoid this, make 4 an unsigned long long literal, which matches the
type of expires (u64).
Fixes: 79dedd8cf74d ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3") Link: https://github.com/ClangBuiltLinux/linux/issues/1017 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Prevent dpcd reads with passive dongles
[why]
During hotplug, a DP port may be connected to the sink through
passive adapter which does not support DPCD reads. Issuing reads
without checking for this condition will result in errors
[how]
Ensure the link is in aux_mode before initiating operation that result
in a DPCD read.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Want to make use of detile buffer of all 4 pipes to maximize amount of
data stored to hide certain memory latency cases.
[How]
In case of 1 plane and 1 stream, program 4 pipes to each retrieve 1/4 of
plane later mixed together by the MPCs. Added support for transition
from 4 to 1 MPC to 2 to 1 MPC or no pipe split case and vice versa.
Currently, only enabled if debug flag is set.
yanyan kang [Mon, 20 Apr 2020 06:40:43 +0000 (14:40 +0800)]
drm/amd/display: The external monitor will show gray screen during SUT reboot
[Why]
same with CL#1711022(correcting yuv420 black color in function dcn10_blank_pixel_data,program_scaler),
yuv420 black color also needs to be correct when enabling HDMI stream at the resume procedure.
[How]
correcting the yuv420 black color according to the way how 420 is packed :2 channels carry Y component,
1 channel alternate between Cb and Cr.
Signed-off-by: yanyan kang <Yanyan.Kang@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Wed, 22 Apr 2020 02:01:30 +0000 (22:01 -0400)]
drm/amd/display: add addition dc type to translate to dmub fw type
[Why]
For a type like PSR version, it makes sense for most of the code
to include a dc type, instead of having this a fw type define since
this is a capability and type exposed by dc.
Especially if it doesn't even need to communicate with the fw.
The code that is packing the firmware command message
should be the one who needs to translate the psr version
into a command that the firmware understands.
[How]
Add a dc_psr_version enum.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 21 Apr 2020 16:29:12 +0000 (12:29 -0400)]
drm/amd/display: Allow PState switch in VBLANK one display VACTIVE
[Why]
For certain display configurations we want to allow PSTATE
switch when one display can switch in VACTIVE and the
other display can switch in VBLANK
[How]
Add extra condition to dcn2 pstate support check
Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Wed, 26 Feb 2020 22:30:29 +0000 (17:30 -0500)]
drm/amd/display: fix counter in wait_for_no_pipes_pending
[Why]
Wait counter is not being reset for each pipe.
[How]
Move counter reset into pipe loop scope.
Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Mode change with same timing causing long display blank
[Why]
What a mode change is requested for the same timing a full stream reset
can occur in some cases which causes monitor to blank for a few seconds.
[How]
Do not consider infoframe updates as needing a full stream reset as they
will be handled on the first flip after a modeset when surface
information is available.
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Mon, 20 Apr 2020 15:38:30 +0000 (11:38 -0400)]
drm/amd/display: Update DCN2.1 DV Code Revision
[WHY & HOW]
There is a problem in hscale_pixel_rate, the bug
causes DCN to be more optimistic (more likely to underflow)
in upscale cases during prefetch.
This commit ports the fix from DV code to address these issues.
Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Mon, 4 May 2020 15:40:35 +0000 (17:40 +0200)]
drm/mm: optimize rb_hole_addr rbtree search
Userspace can severely fragment rb_hole_addr rbtree by manipulating
alignment while allocating buffers. Fragmented rb_hole_addr rbtree
would result in large delays while allocating buffer object for a
userspace application. It takes long time to find suitable hole
because if we fail to find a suitable hole in the first attempt
then we look for neighbouring nodes using rb_prev()/rb_next().
Traversing rbtree using rb_prev()/rb_next() can take really long
time if the tree is fragmented.
This patch improves searches in fragmented rb_hole_addr rbtree by
modifying it to an augmented rbtree which will store an extra field
in drm_mm_node, subtree_max_hole. Each drm_mm_node now stores maximum
hole size for its subtree in drm_mm_node->subtree_max_hole. Using
drm_mm_node->subtree_max_hole, it is possible to eliminate a complete
subtree if that subtree is unable to serve a request hence reducing
number of rb_prev()/rb_next() used.
With this patch applied, 1 million bo allocs on amdgpu took ~8 sec,
compared to 50k bo allocs which took 28 sec without it.
partial test code:
int test_fragmentation(void)
{
int i = 0;
uint32_t minor_version;
uint32_t major_version;
for (i = 0; i < MAX_ALLOC; i++) {
amdgpu_bo_alloc(device_handle, &request, &vram_handle[i]);
}
for (i = 0; i < MAX_ALLOC; i++)
amdgpu_bo_free(vram_handle[i]);
return 0;
}
v2:
Use RB_DECLARE_CALLBACKS_MAX to maintain subtree_max_hole
v3:
insert_hole_addr() should be static a function
fix return value of next_hole_high_addr()/next_hole_low_addr() Reported-by: kbuild test robot <lkp@intel.com>
v4:
Fix commit message.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/364341/ Signed-off-by: Christian König <christian.koenig@amd.com>
Author: Christian König <christian.koenig@amd.com>
Date: Wed Sep 25 11:38:50 2019 +0200
drm/ttm: remove pointers to globals
Signed-off-by: Maya Rashish <coypu@sdf.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/360750/ Signed-off-by: Christian König <christian.koenig@amd.com>
drm/client: Dual licence the header in GPL-2 and MIT
Source file was dual licenced but the header was omitted, fix that.
Contributors for this file are:
Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper <matthew.d.roper@intel.com>
Maxime Ripard <mripard@kernel.org>
Noralf Trønnes <noralf@tronnes.org>
Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Emmanuel Vadot <manu@FreeBSD.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200430153347.85323-1-manu@FreeBSD.org
This is a driver for video encoder with VGA and DVI/HDMI outputs.
There is no documentation for the chip -- the operation was guessed from
what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names
come from the ch7035 driver in Mediatek's GPL code dump.
Only bare minimum is implemented -- no fancy stuff, such as scaling. That
would only worsen our misery. We don't load the firmware and we don't need
to even bother enabling the MCU. There are probably no distributable
firmware images anyway.
Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60,
with VGA as well as DVI.
Tomi Valkeinen [Wed, 29 Apr 2020 12:10:22 +0000 (15:10 +0300)]
drm/tidss: remove AM65x PG1 YUV erratum code
AM65x PG1 has a HW issue with YUV pixel formats, resulting in wrong
colors on the screen. This issue is fixed in PG2 hardware.
The driver currently has code to hide YUV pixel formats from the
userspace. To support PG2, we would need to add code to detect the SoC
version and hide the YUV formats based on that.
However, as PG1 will be phased out and PG2 will be the main platform, a
much simpler solution is just to drop the code in question. The downside
is that the users will be able to use YUV formats on PG1, getting wrong
colors on the screen. On the other hand, that may also be a plus, as the
same applications will now work on PG1 and PG2, even if the colors are
wrong on PG1.
Tomi Valkeinen [Fri, 17 Apr 2020 11:41:51 +0000 (14:41 +0300)]
drm/omap: change default signal polarities and drives
If the given videomode does not specify DISPLAY_FLAG_* for the specific
signal property, the driver used a default value. These defaults were
never thought through, as the expectation was that all the DISPLAY_FLAGS
are always set explicitly.
With DRM bridge and panel drivers this is not the case, and while that
issue should be resolved in the future, it's still good to have sane
signal defaults.
This patch changes the defaults to what the hardware has as reset
defaults. Also, based on my experience, I think they make sense and are
more likely correct than the defaults without this patch.
David Lu [Tue, 28 Apr 2020 06:45:21 +0000 (14:45 +0800)]
drm/panel: boe-tv101wum-n16: fine tune clock
fix boe_tv105wum_nw0 display shift.
Signed-off-by: David Lu <david.lu@bitland.com.cn> Fixes: f1940cd90b1d ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel") Cc: David Lu <david.lu@bitland.com.cn> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag] Link: https://patchwork.freedesktop.org/patch/msgid/20200428064521.21511-1-david.lu@bitland.com.cn
Adrian Ratiu [Thu, 23 Apr 2020 10:00:58 +0000 (13:00 +0300)]
dt-bindings: display: dw_mipi_dsi.txt: convert to yaml
This converts the Synopsis MIPI DSI binding documentation to yaml and
should be quite straightforward. I've added a missing ref clk and also
added Philippe as maintainer b/c he's the original txt author following
the algorithm provided in Message-ID 20200420175909.GA5810@ravnborg.org.
Cc: Philippe CORNU <philippe.cornu@st.com> Cc: devicetree@vger.kernel.org Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200423100058.1734009-1-adrian.ratiu@collabora.com
allen [Mon, 27 Apr 2020 09:16:52 +0000 (17:16 +0800)]
dt-bindings: fix vendor prefix for ITE Tech. Inc.
ITE Tech. Inc. (abbreviated as ITE ) is a professional fabless IC
design house. ITE's core technology includes PC and NB Controller chips,
Super I/O, High Speed Serial Interface, Video Codec, Touch Sensing,
Surveillance, OFDM, Sensor Fusion, and so on.
Our official name is "ITE Tech. Inc.", so change "ITE," to "ITE.".
more information on: http://www.ite.com.tw/
Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Acked-by: Rob Herring <robh@kernel.org> Fixes: 5fdeb0b8559c ("dt-bindings: Add ITE Tech prefix") Cc: Marek Vasut <marex@denx.de> Cc: devicetree@vger.kernel.org Cc: Allen Chen <allen.chen@ite.com.tw> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag and updated subject] Link: https://patchwork.freedesktop.org/patch/msgid/1587979103-5630-2-git-send-email-allen.chen@ite.com.tw
amd/amdgpu: Limit rlcg write registers only for nv12
Create gfx_v10_0_rlc_funcs_sriov for nv12 with rlcg_write function pointers be initialized
so driver can use RLCG to write aceess CSIB and CP_ME_CNTL registers when nv12 in sriov mode
Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yong Zhao [Wed, 4 Mar 2020 21:52:41 +0000 (16:52 -0500)]
drm/amdkfd: Use a systematic method to calculate queue mask bit
The queue mask used for set_resources always assumes the queue number
per pipe is 8, so KFD needs to align with that by using function
amdgpu_queue_mask_bit_to_set_resource_bit().
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Thu, 16 Jan 2020 17:10:52 +0000 (01:10 +0800)]
drm/amdgpu: skip reservation of discovery tmr region in pre-Navi
IP discovery is only supported in Navi series and onwards.
There is no need to reserve a portion of vram as discovery
tmr region for pre-Navi adapters.
projects / kernel.git / log