Hans de Goede [Sat, 9 Jul 2022 04:42:12 +0000 (21:42 -0700)]
Input: goodix - call acpi_device_fix_up_power() in some cases
On ACPI boards, when we cannot get the GPIOs to do a reset ourselves
if necessary, call acpi_device_fix_up_power() to force the ACPI _PS0
method to run.
On some devices without proper GPIO descriptions this will reset
the touchscreen for us and this may be necessary for us to be able
to communicate to the touchscreen at all.
Specifically on an Aya Neo Next this change will cause the _PS0()
ACPI function to call INIT() which does:
On older kernels the ACPI core assumed a power-on was necessary by itself
and would run _PS0 before our probe function runs, which can be seen from
the GPIO pin ctrl registers in /sys/kernel/debug/gpio which match
the above hex values with older kernels.
With newer kernels before this change the GPIO pin ctrl registers do not
match, indicating INIT() has not run and probing the touchscreen fails.
This change makes Linux run _PS0() again fixing the touchscreen not working
on the Aya Neo Next.
Input: wm97xx - make .remove() obviously always return 0
wm97xx_remove() returns zero unconditionally. To prepare changing the
prototype for platform remove callbacks to return void, make it explicit
that wm97xx_mfd_remove() always returns zero.
The prototype for wm97xx_remove cannot be changed, as it's also used as
a plain device remove callback.
Add a sanity check on the device id-table driver_info field to make sure
we never access a type structure (and function pointers) outside of the
device info array (e.g. if someone fails to ifdef a device-id entry).
Note that this also suppresses a compiler warning with -Warray-bounds
(gcc-11.3.0) when compile-testing the driver without enabling any of
the device type Kconfig options:
drivers/input/touchscreen/usbtouchscreen.c: In function 'usbtouch_probe':
drivers/input/touchscreen/usbtouchscreen.c:1668:16:warning: array subscript <unknown> is outside array bounds of 'struct usbtouch_device_info[0]' [-Warray-bounds]
1668 | type = &usbtouch_dev_info[id->driver_info];
Marius Hoch [Tue, 7 Jun 2022 19:10:52 +0000 (12:10 -0700)]
Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq
Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2
1051L to the dmi_use_low_level_irq list") added the 1051L to this list
already, but the same problem applies to the 1051F. As there are no
further 1051 variants (just the F/L), we can just DMI match 1051.
Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the
home-button stops working after a wakeup from suspend.
Mathias Nyman [Tue, 7 Jun 2022 19:11:33 +0000 (12:11 -0700)]
Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag
The bcm5974 driver does the allocation and dma mapping of the usb urb
data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag
to let usb core know the buffer is already mapped.
usb core tries to map the already mapped buffer, causing a warning:
"xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory"
Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core
know buffer is already mapped by bcm5974 driver
Since JOYSTICK_SENSEHAT selects MFD_SIMPLE_MFD_I2C and the latter
depends on HAS_IOMEM, and since 'select' does not follow any
dependency chains, JOYSTICK_SENSEHAT should also depend on HAS_IOMEM
to prevent a kconfig warning and a build error:
WARNING: unmet direct dependencies detected for MFD_SIMPLE_MFD_I2C
Depends on [n]: HAS_IOMEM [=n] && I2C [=y]
Selected by [y]:
- JOYSTICK_SENSEHAT [=y] && INPUT_JOYSTICK [=y] && INPUT [=y] && I2C [=y]
s390-linux-ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_probe':
simple-mfd-i2c.c:(.text+0xc8): undefined reference to `devm_mfd_add_devices'
Dmitry Torokhov [Wed, 25 May 2022 16:51:08 +0000 (09:51 -0700)]
Input: stmfts - do not leave device disabled in stmfts_input_open
The commit 26623eea0da3 attempted to deal with potential leak of runtime
PM counter when opening the touchscreen device, however it ended up
erroneously dropping the counter in the case of successfully enabling the
device.
Let's address this by using pm_runtime_resume_and_get() and then executing
pm_runtime_put_sync() only when we fail to send "sense on" command to the
device.
Fixes: 26623eea0da3 ("Input: stmfts - fix reference leak in stmfts_input_open") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Lad Prabhakar [Wed, 25 May 2022 21:39:28 +0000 (14:39 -0700)]
Input: gpio-keys - cancel delayed work only in case of GPIO
gpio_keys module can either accept gpios or interrupts. The module
initializes delayed work in case of gpios only and is only used if
debounce timer is not used, so make sure cancel_delayed_work_sync()
is called only when its gpio-backed and debounce_use_hrtimer is false.
This fixes the issue seen below when the gpio_keys module is unloaded and
an interrupt pin is used instead of GPIO:
Zongmin Zhou [Wed, 18 May 2022 04:50:03 +0000 (21:50 -0700)]
Input: vmmouse - disable vmmouse before entering suspend mode
Currently, when trying to suspend and resume with VirtualPS/2 VMMouse
there is an error message after resuming:
psmouse serio1: vmmouse: Unable to re-enable mouse when reconnecting, err: -6
and the mouse will no longer be operable, requiring full rescan to find a
another driver to use for the port.
This error is due to QEMU still generating PS2 events which the kernel is
not consuming until resume time, where they interfere with mouse
identification and ultimately resulting in an error getting
VMMOUSE_VERSION_ID.
Test scenario:
1) start virtual machine with qemu command "vmport=on"
2) click suspend botton to enter suspend mode
3) resume and observe the error message in the kernel logs
Let's fix this by disabling the vmmouse in its reset handler. This will
notify qemu to stop vmmouse and remove the handler.
Marek Vasut [Wed, 18 May 2022 21:30:09 +0000 (14:30 -0700)]
Input: ili210x - use one common reset implementation
Rename ili251x_hardware_reset() to ili210x_hardware_reset(), change its
parameter from struct device * to struct gpio_desc *, and use it as one
single consistent reset implementation all over the driver. Also increase
the minimum reset duration to 12ms, to make sure the reset is really
within the spec.
Marek Vasut [Wed, 18 May 2022 21:28:32 +0000 (14:28 -0700)]
Input: ili210x - fix reset timing
According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30
"2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum
10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset
timings such that T4 is 12ms and T2 is 160ms to fit those figures.
This prevents sporadic touch controller start up failures when some
systems with at least ILI251x controller boot, without this patch
the systems sometimes fail to communicate with the touch controller.
If the device is a detachable (and therefore lacks full keyboard), we may
still want to load this driver because the device might have some other
buttons or switches (e.g. volume and power buttons or a tablet mode
switch). In such case we do not want to register the "main" keyboard device
to allow userspace detect when the detachable keyboard is disconnected and
adjust the system behavior for the tablet mode.
Originally it was suggested to simply skip keyboard registration if row and
columns properties didn't exist, but that approach did not convey the
intent strongly enough and also had a slight problem for migrating existing
DTBs without updating the kernel first, so it was decided to introduce new
google,cros-ec-keyb-switches to explicitly mark devices that only have
axillary buttons and switches.
Stephen Boyd [Mon, 16 May 2022 18:55:31 +0000 (11:55 -0700)]
dt-bindings: google,cros-ec-keyb: Introduce switches only compatible
If the ChromeOS board is a detachable, this cros-ec-keyb device won't
have a matrix keyboard but it may have some button switches, e.g. volume
buttons and power buttons. The driver still registers a keyboard though
and that leads to userspace confusion around where the keyboard is.
We tried to work around this by only registering the keyboard device when
rows/columns properties were specified for the device, but that led to
another problem where removing the rows/columns properties breaks the
existing binding. Technically before that commit the rows/columns
properties were required, otherwise the driver would fail to probe.
Removing the properties from devicetrees makes the driver fail to probe
unless the corresponding driver patch is present. Furthermore, this makes
requiring matrix keyboard properties for devices that really have a
keyboard impossible because the compatible drives the schema and now the
properties are optional.
Add a more specific compatible for this type of device that indicates to
the OS that there are only switches and no matrix keyboard present.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20220516183452.942008-2-swboyd@chromium.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Miaoqian Lin [Mon, 16 May 2022 21:55:55 +0000 (14:55 -0700)]
Input: sparcspkr - fix refcount leak in bbc_beep_probe
of_find_node_by_path() calls of_find_node_opts_by_path(),
which returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Samuel Holland [Mon, 25 Apr 2022 03:42:09 +0000 (20:42 -0700)]
Input: sun4i-lradc-keys - add support for R329 and D1
This LRADC variant uses the same 3/4*AVCC reference voltage as the A83T
variant. The R329 and D1 LRADCs appear to be identical, so D1 support is
accomplished through having the R329 LRADC as a fallback compatible.
Samuel Holland [Mon, 25 Apr 2022 03:39:11 +0000 (20:39 -0700)]
Input: sun4i-lradc-keys - add optional clock/reset support
Until the R329, the LRADC hardware was always active. Now it requires
enabling a clock gate and deasserting a reset line. Add support for this
variant of the hardware.
Samuel Holland [Mon, 25 Apr 2022 03:38:44 +0000 (20:38 -0700)]
dt-bindings: input: sun4i-lradc-keys: Add R329 and D1 compatibles
The R329 and D1 SoCs each contain an LRADC with a programming interface
compatible to earlier LRADCs. However, the LRADC now has its own clock
gate and reset line, instead of being always active.
To support this, add clock/reset properties to the binding, and require
them for the variant in the new SoCs.
Acked-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220414002349.24332-1-samuel@sholland.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ondrej Jirman [Mon, 25 Apr 2022 01:02:17 +0000 (18:02 -0700)]
Input: sun4i-lradc-keys - add wakeup support
Allow the driver to wake the system on key press if the "wakeup-source"
property is provided in the device tree. Using the LRADC as a wakeup
source requires keeping the AVCC domain active during sleep. Since this
has a nontrivial impact on power consumption (sometimes doubling it),
disable the LRADC wakeup source by default.
Signed-off-by: Ondrej Jirman <x@xff.cz> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220424161328.61103-1-samuel@sholland.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The status of the keys connected to the KPDPWR_N and RESIN_N pins
is identified by reading corresponding bits in the interrupt real
time status register. If the status has changed by the time that
the interrupt is handled then a press event will be missed.
Maintain a last known status variable to find unbalanced release
events and simulate press events for each accordingly.
David Collins [Mon, 25 Apr 2022 01:20:05 +0000 (18:20 -0700)]
Input: pm8941-pwrkey - add software key press debouncing support
On certain PMICs, an unexpected assertion of KPDPWR_DEB (the
positive logic hardware debounced power key signal) may be seen
during the falling edge of KPDPWR_N (i.e. a power key press) when
it occurs close to the rising edge of SLEEP_CLK. This then
triggers a spurious KPDPWR interrupt.
Handle this issue by adding software debouncing support to ignore
key events that occur within the hardware debounce delay after the
most recent key release event.
Input: pm8941-pwrkey - add support for PON GEN3 base addresses
Currently, PON address is read from the "reg" property. For PON GEN3,
which starts with PMK8350, the "reg" property will have both the PON
HLOS and PON PBS addesses defined. Add support so that all PON
generations can be configured.
Input: ep93xx_keypad - use devm_platform_ioremap_resource() helper
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately. This
makes the code simpler without functional changes.
Charles Mirabile [Wed, 20 Apr 2022 21:00:20 +0000 (14:00 -0700)]
Input: add Raspberry Pi Sense HAT joystick driver
This patch adds the driver for the Sense HAT joystick. It outputs BTN_DPAD
key events when moved in any of the four directions and the BTN_SELECT
event when depressed.
Co-developed-by: Daniel Bauman <dbauman@redhat.com> Signed-off-by: Daniel Bauman <dbauman@redhat.com> Co-developed-by: Mwesigwa Guma <mguma@redhat.com> Signed-off-by: Mwesigwa Guma <mguma@redhat.com> Co-developed-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Charles Mirabile <cmirabil@redhat.com> Link: https://lore.kernel.org/r/20220419205158.28088-3-cmirabil@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Alexander Shiyan [Wed, 20 Apr 2022 20:58:45 +0000 (13:58 -0700)]
Input: clps711x-keypad - use syscon_regmap_lookup_by_phandle
Since version 5.13, the standard syscon bindings have been added
to all clps711x DT nodes, so we can now use the more general
syscon_regmap_lookup_by_phandle function to get the syscon pointer.
Colin Ian King [Mon, 18 Apr 2022 18:46:32 +0000 (11:46 -0700)]
Input: aiptek - remove redundant assignment to variable ret
Variable ret is being assigned a value that is never read, it is
being re-assigned again in either path of the if statement. The
assignment is redundant and can be removed.
Cleans up clang scan build warning:
Although the value stored to 'ret' is used in the enclosing expression,
the value is never actually read from 'ret' [deadcode.DeadStores]
Jeff LaBundy [Sun, 17 Apr 2022 23:05:07 +0000 (16:05 -0700)]
Input: iqs7222 - avoid dereferencing a NULL pointer
Select callers of iqs7222_parse_props() do not expect a child node
to be derived and returned via pointer. As such, these callers set
**child_node to NULL. However, this pointer is dereferenced in all
cases.
To solve this problem, dereference the pointer only for cases that
expect a child node in the first place. In these cases, the caller
provides a valid pointer.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220417214132.497487-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dan Carpenter [Sun, 17 Apr 2022 20:03:53 +0000 (13:03 -0700)]
Input: iqs7222 - propagate some error codes correctly
If fwnode_property_count_u32() returns a negative error code then,
because of type promotion, the "count > ARRAY_SIZE(pins)" condition
will be true. The negative "count" is type promoted to a high unsigned
size_t value.
That means the "else if (count < 0)" condition will always be false and
we don't print that error message or propagate the error code from
fwnode_property_count_u32() as intended.
Fix this by re-ordering the checks so that we check for negative first.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220412153954.GA15406@kili Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.
Input: mt6779-keypad - move iomem pointer to probe function
The mmio base address is used for the only purpose of initializing
regmap for this driver, hence it's not necessary to have it in the
main driver structure, as it is used only in the probe() callback.
Move it local to function mt6779_keypad_pdrv_probe().
The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.
In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:
However, because of the change introduced in 37ef4c19b4 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.
In order to avoid breakage on other present or future devices, revert
the patch causing the issue.
Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Colin Ian King [Mon, 21 Mar 2022 05:01:12 +0000 (22:01 -0700)]
Input: adi - remove redundant variable z
Variable z is being assigned a value that is never read, the
variable is redundant and can be removed.
Cleans up clang scan build warning:
drivers/input/joystick/adi.c:139:6: warning: Although the
value stored to 'z' is used in the enclosing expression,
the value is never actually read from 'z' [deadcode.DeadStores]
Markuss Broks [Tue, 15 Mar 2022 05:56:19 +0000 (22:56 -0700)]
Input: add Imagis touchscreen driver
Add support for the IST3038C touchscreen IC from Imagis, based on
downstream driver. The driver supports multi-touch (10 touch points)
The IST3038C IC supports touch keys, but the support isn't added
because the touch screen used for testing doesn't utilize touch keys.
Looking at the downstream driver, it is possible to add support
for other Imagis ICs of IST30**C series.
Matthew Haughton [Mon, 21 Mar 2022 04:57:49 +0000 (21:57 -0700)]
Input: synaptics - enable InterTouch on ThinkPad T14/P14s Gen 1 AMD
Confirmed LEN2064 on my P14s works with psmouse.synaptics_intertouch=1
By all accounts T14 and P14s are the same hardware which only differ by
model identifier.
Zheng Yongjun [Mon, 21 Mar 2022 04:56:38 +0000 (21:56 -0700)]
Input: stmfts - fix reference leak in stmfts_input_open
pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stmfts_input_open, so we should fix it.
Jeff LaBundy [Mon, 21 Mar 2022 04:54:32 +0000 (21:54 -0700)]
Input: iqs5xx - use local input_dev pointer
Both iqs5xx_axis_init() and iqs5xx_irq() already define a local
input_dev pointer 'input'. Use this instead of iqs5xx->input so
as to make the code a bit smaller.
Linus Torvalds [Sun, 20 Mar 2022 16:27:52 +0000 (09:27 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Two driver fixes:
- a fix for zinitix touchscreen to properly report contacts
- a fix for aiptek tablet driver to be more resilient to devices with
incorrect descriptors"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: aiptek - properly check endpoint type
Input: zinitix - do not report shadow fingers
Borislav Petkov [Wed, 16 Mar 2022 21:05:52 +0000 (22:05 +0100)]
kvm/emulate: Fix SETcc emulation function offsets with SLS
The commit in Fixes started adding INT3 after RETs as a mitigation
against straight-line speculation.
The fastop SETcc implementation in kvm's insn emulator uses macro magic
to generate all possible SETcc functions and to jump to them when
emulating the respective instruction.
However, it hardcodes the size and alignment of those functions to 4: a
three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an
INT3 that gets slapped after the RET, which brings the whole scheme out
of alignment:
15: 0f 90 c0 seto %al
18: c3 ret
19: cc int3
1a: 0f 1f 00 nopl (%rax)
1d: 0f 91 c0 setno %al
20: c3 ret
21: cc int3
22: 0f 1f 00 nopl (%rax)
25: 0f 92 c0 setb %al
28: c3 ret
29: cc int3
Raise the alignment value when SLS is enabled and use a macro for that
instead of hard-coding naked numbers.
Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation") Reported-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Jamie Heilman <jamie@audible.transient.net> Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net
[Add a comment and a bit of safety checking, since this is going to be changed
again for IBT support. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 19 Mar 2022 23:36:32 +0000 (16:36 -0700)]
Merge tag 'soc-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fix from Arnd Bergmann:
"Here is one last regression fix for 5.17, reverting a patch that went
into 5.16 as a cleanup that ended up breaking external interrupts on
Layerscape chips.
The revert makes it work again, but also reintroduces a build time
warning about the nonstandard DT binding that will have to be dealt
with in the future"
* tag 'soc-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
Revert "arm64: dts: freescale: Fix 'interrupt-map' parent address cells"
Linus Torvalds [Sat, 19 Mar 2022 22:56:43 +0000 (15:56 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small(ish) fixes, both in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Finish scsi_cmnd before dropping the spinlock
scsi: mpt3sas: Page fault in reply q processing
Linus Torvalds [Sat, 19 Mar 2022 18:04:10 +0000 (11:04 -0700)]
Merge tag 'perf-tools-fixes-for-v5.17-2022-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Avoid iterating empty evlist, fixing a segfault with 'perf stat --null'
- Ignore case in topdown.slots check, fixing issue with Intel Icelake
JSON metrics.
- Fix symbol size calculation condition for fixing up corner case
symbol end address obtained from Kallsyms.
* tag 'perf-tools-fixes-for-v5.17-2022-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf parse-events: Ignore case in topdown.slots check
perf evlist: Avoid iteration for empty evlist.
perf symbols: Fix symbol size calculation condition
Linus Torvalds [Sat, 19 Mar 2022 17:21:34 +0000 (10:21 -0700)]
Merge tag 'char-misc-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fix from Greg KH:
"Here is a single driver fix for 5.17-final that has been submitted
many times but I somehow missed it in my patch queue:
- fix for counter sysfs code for reported problem
This has been in linux-next all week with no reported issues"
* tag 'char-misc-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: Stop using dev_get_drvdata() to get the counter device
Linus Torvalds [Sat, 19 Mar 2022 17:16:33 +0000 (10:16 -0700)]
Merge tag 'usb-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small remaining USB fixes for 5.17-final.
They include:
- two USB gadget driver fixes for reported problems
- usbtmc driver fix for syzbot found issues
- musb patch partial revert to resolve a reported regression.
All of these have been in linux-next this week with no reported
problems"
* tag 'usb-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: Fix use-after-free bug by not setting udc->dev.driver
usb: usbtmc: Fix bug in pipe direction for control transfers
partially Revert "usb: musb: Set the DT node on the child device"
usb: gadget: rndis: prevent integer overflow in rndis_set_response()
Michael Petlan [Thu, 17 Mar 2022 13:55:36 +0000 (14:55 +0100)]
perf symbols: Fix symbol size calculation condition
Before this patch, the symbol end address fixup to be called, needed two
conditions being met:
if (prev->end == prev->start && prev->end != curr->start)
Where
"prev->end == prev->start" means that prev is zero-long
(and thus needs a fixup)
and
"prev->end != curr->start" means that fixup hasn't been applied yet
However, this logic is incorrect in the following situation:
In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.
After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.
Fixes: 3b01a413c196c910 ("perf symbols: Improve kallsyms symbol end addr calculation") Signed-off-by: Michael Petlan <mpetlan@redhat.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Fri, 18 Mar 2022 19:32:59 +0000 (12:32 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Fix two compiler warnings introduced by recent commits: pointer
arithmetic and double initialisation of struct field"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: avoid duplicate field initializer
arm64: fix clang warning about TRAMP_VALIAS
Linus Torvalds [Fri, 18 Mar 2022 19:22:15 +0000 (12:22 -0700)]
Merge tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French:
"Small fix for regression in multiuser mounts.
The additional improvements suggested by Ronnie to make the server and
session status handling code easier to read can wait for the 5.18
merge window."
* tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix incorrect session setup check for multiuser mounts
Linus Torvalds [Fri, 18 Mar 2022 19:15:56 +0000 (12:15 -0700)]
Merge tag 'block-5.17-2022-03-18' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Revert of a nvme target feature (Hannes)
- Fix a memory leak with rq-qos (Ming)
* tag 'block-5.17-2022-03-18' of git://git.kernel.dk/linux-block:
nvmet: revert "nvmet: make discovery NQN configurable"
block: release rq qos structures for queue without disk
* tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm:
drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings
drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
drm/mgag200: Fix PLL setup for g200wb and g200ew
Arnd Bergmann [Wed, 16 Mar 2022 18:38:18 +0000 (19:38 +0100)]
arm64: fix clang warning about TRAMP_VALIAS
The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:
arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
return (char *)TRAMP_VALIAS + SZ_2K * slot;
Change the addition to something clang does not complain about.
Dave Airlie [Fri, 18 Mar 2022 03:30:30 +0000 (13:30 +1000)]
Merge tag 'drm-misc-fixes-2022-03-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/imx: Don't test bus flags in atomic check
* drm/mgag200: Fix PLL setup on some models
* drm/panel: Fix bpp settings on Innolux G070Y2-L01; Fix DRM_PANEL_EDP
Kconfig dependencies
Linus Torvalds [Thu, 17 Mar 2022 19:40:59 +0000 (12:40 -0700)]
Merge tag 'acpi-5.17-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert recent commit that caused multiple systems to misbehave due to
firmware issues"
* tag 'acpi-5.17-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: scan: Do not add device IDs from _CID if _HID is not valid"
Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.
Link: https://lkml.kernel.org/r/20220304000645.1888133-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Wed, 16 Mar 2022 23:15:09 +0000 (16:15 -0700)]
ocfs2: fix crash when initialize filecheck kobj fails
Once s_root is set, genric_shutdown_super() will be called if
fill_super() fails. That means, we will call ocfs2_dismount_volume()
twice in such case, which can lead to kernel crash.
Fix this issue by initializing filecheck kobj before setting s_root.
Link: https://lkml.kernel.org/r/20220310081930.86305-1-joseph.qi@linux.alibaba.com Fixes: 5f483c4abb50 ("ocfs2: add kobject for online file check") Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Wed, 16 Mar 2022 23:15:06 +0000 (16:15 -0700)]
configs/debug: restore DEBUG_INFO=y for overriding
Previously, I failed to realize that Kees' patch [1] has not been merged
into the mainline yet, and dropped DEBUG_INFO=y too eagerly from the
mainline. As the results, "make debug.config" won't be able to flip
DEBUG_INFO=n from the existing .config. This should close the gaps of a
few weeks before Kees' patch is there, and work regardless of their
merging status anyway.
The reason for the livelock is that swapcache_prepare() always returns
EEXIST, indicating that SWAP_HAS_CACHE has not been cleared, so that it
cannot jump out of the loop. We suspect that the task that clears the
SWAP_HAS_CACHE flag never gets a chance to run. We try to lower the
priority of the task stuck in a livelock so that the task that clears
the SWAP_HAS_CACHE flag will run. The results show that the system
returns to normal after the priority is lowered.
In our testing, multiple real-time tasks are bound to the same core, and
the task in the livelock is the highest priority task of the core, so
the livelocked task cannot be preempted.
Although cond_resched() is used by __read_swap_cache_async, it is an
empty function in the preemptive system and cannot achieve the purpose
of releasing the CPU. A high-priority task cannot release the CPU
unless preempted by a higher-priority task. But when this task is
already the highest priority task on this core, other tasks will not be
able to be scheduled. So we think we should replace cond_resched() with
schedule_timeout_uninterruptible(1), schedule_timeout_interruptible will
call set_current_state first to set the task state, so the task will be
removed from the running queue, so as to achieve the purpose of giving
up the CPU and prevent it from running in kernel mode for too long.
(akpm: ugly hack becomes uglier. But it fixes the issue in a
backportable-to-stable fashion while we hopefully work on something
better)
Link: https://lkml.kernel.org/r/20220221111749.1928222-1-cgel.zte@gmail.com Signed-off-by: Guo Ziliang <guo.ziliang@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn> Reviewed-by: Yang Yang <yang.yang29@zte.com.cn> Acked-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roger Quadros <rogerq@kernel.org> Cc: Ziliang Guo <guo.ziliang@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ivan Vecera [Thu, 17 Mar 2022 10:45:24 +0000 (11:45 +0100)]
iavf: Fix hang during reboot/shutdown
Recent commit 974578017fc1 ("iavf: Add waiting so the port is
initialized in remove") adds a wait-loop at the beginning of
iavf_remove() to ensure that port initialization is finished
prior unregistering net device. This causes a regression
in reboot/shutdown scenario because in this case callback
iavf_shutdown() is called and this callback detaches the device,
makes it down if it is running and sets its state to __IAVF_REMOVE.
Later shutdown callback of associated PF driver (e.g. ice_shutdown)
is called. That callback calls among other things sriov_disable()
that calls indirectly iavf_remove() (see stack trace below).
As the adapter state is already __IAVF_REMOVE then the mentioned
loop is end-less and shutdown process hangs.
The patch fixes this by checking adapter's state at the beginning
of iavf_remove() and skips the rest of the function if the adapter
is already in remove state (shutdown is in progress).
Reproducer:
1. Create VF on PF driven by ice or i40e driver
2. Ensure that the VF is bound to iavf driver
3. Reboot
Vladimir Oltean [Wed, 16 Mar 2022 19:21:17 +0000 (21:21 +0200)]
net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
ACL rules can be offloaded to VCAP IS2 either through chain 0, or, since
the blamed commit, through a chain index whose number encodes a specific
PAG (Policy Action Group) and lookup number.
The chain number is translated through ocelot_chain_to_pag() into a PAG,
and through ocelot_chain_to_lookup() into a lookup number.
The problem with the blamed commit is that the above 2 functions don't
have special treatment for chain 0. So ocelot_chain_to_pag(0) returns
filter->pag = 224, which is in fact -32, but the "pag" field is an u8.
So we end up programming the hardware with VCAP IS2 entries having a PAG
of 224. But the way in which the PAG works is that it defines a subset
of VCAP IS2 filters which should match on a packet. The default PAG is
0, and previous VCAP IS1 rules (which we offload using 'goto') can
modify it. So basically, we are installing filters with a PAG on which
no packet will ever match. This is the hardware equivalent of adding
filters to a chain which has no 'goto' to it.
Restore the previous functionality by making ACL filters offloaded to
chain 0 go to PAG 0 and lookup number 0. The choice of PAG is clearly
correct, but the choice of lookup number isn't "as before" (which was to
leave the lookup a "don't care"). However, lookup 0 should be fine,
since even though there are ACL actions (policers) which have a
requirement to be used in a specific lookup, that lookup is 0.
Doug Berger [Thu, 17 Mar 2022 01:28:12 +0000 (18:28 -0700)]
net: bcmgenet: skip invalid partial checksums
The RXCHK block will return a partial checksum of 0 if it encounters
a problem while receiving a packet. Since a 1's complement sum can
only produce this result if no bits are set in the received data
stream it is fair to treat it as an invalid partial checksum and
not pass it up the stack.
Fixes: 810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220317012812.1313196-1-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Manish Chopra [Wed, 16 Mar 2022 21:46:13 +0000 (14:46 -0700)]
bnx2x: fix built-in kernel driver load failure
Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
added request_firmware() logic in probe() which caused
load failure when firmware file is not present in initrd (below),
as access to firmware file is not feasible during probe.
Direct firmware load for bnx2x/bnx2x-e2-7.13.15.0.fw failed with error -2
Direct firmware load for bnx2x/bnx2x-e2-7.13.21.0.fw failed with error -2
This patch fixes this issue by -
1. Removing request_firmware() logic from the probe()
such that .ndo_open() handle it as it used to handle
it earlier
2. Given request_firmware() is removed from probe(), so
driver has to relax FW version comparisons a bit against
the already loaded FW version (by some other PFs of same
adapter) to allow different compatible/close enough FWs with which
multiple PFs may run with (in different environments), as the
given PF who is in probe flow has no idea now with which firmware
file version it is going to initialize the device in ndo_open()
drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
Fix a number of undefined references to drm_kms_helper.ko in
drm_dp_helper.ko:
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state':
drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state'
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work':
drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event'
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work':
drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event'
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work':
drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event'
This happens if panel-edp.ko has been configured with
DRM_PANEL_EDP=y
DRM_DP_HELPER=y
DRM_KMS_HELPER=m
which builds DP helpers into the kernel and KMS helpers sa a module.
Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem.
To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't
make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge
drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers
cannot be selected directly by the user, config symbols should avoid
depending on it anyway.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 3755d35ee1d2 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP") Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Brian Masney <bmasney@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Linux Kernel Functional Testing <lkft@linaro.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/478296/
Steve French [Thu, 17 Mar 2022 03:08:43 +0000 (22:08 -0500)]
smb3: fix incorrect session setup check for multiuser mounts
A recent change to how the SMB3 server (socket) and session status
is managed regressed multiuser mounts by changing the check
for whether session setup is needed to the socket (TCP_Server_info)
structure instead of the session struct (cifs_ses). Add additional
check in cifs_setup_sesion to fix this.
Fixes: 73f9bfbe3d81 ("cifs: maintain a state machine for tcp/smb/tcon sessions") Reported-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
This reverts commit 869f0ec048dc8fd88c0b2003373bd985795179fb. That
updated the expected device tree binding format for the ls-extirq
driver, without also updating the parsing code (ls_extirq_parse_map)
to the new format.
The context is that the ls-extirq driver uses the standard
"interrupt-map" OF property in a non-standard way, as suggested by
Rob Herring during review:
https://lore.kernel.org/lkml/20190927161118.GA19333@bogus/
This has turned out to be problematic, as Marc Zyngier discovered
through commit 041284181226 ("of/irq: Allow matching of an interrupt-map
local to an interrupt controller"), later fixed through commit de4adddcbcc2 ("of/irq: Add a quirk for controllers with their own
definition of interrupt-map"). Marc's position, expressed on multiple
opportunities, is that:
(a) [ making private use of the reserved "interrupt-map" name in a
driver ] "is wrong, by the very letter of what an interrupt-map
means. If the interrupt map points to an interrupt controller,
that's the target for the interrupt."
https://lore.kernel.org/lkml/87k0g8jlmg.wl-maz@kernel.org/
(b) [ updating the driver's bindings to accept a non-reserved name for
this property, as an alternative, is ] "is totally pointless. These
machines have been in the wild for years, and existing DTs will be
there *forever*."
https://lore.kernel.org/lkml/87ilvrk1r0.wl-maz@kernel.org/
Considering the above, the Linux kernel has quirks in place to deal with
the ls-extirq's non-standard use of the "interrupt-map". These quirks
may be needed in other operating systems that consume this device tree,
yet this is seen as the only viable solution.
Therefore, the premise of the patch being reverted here is invalid.
It doesn't matter whether the driver, in its non-standard use of the
property, complies to the standard format or not, since this property
isn't expected to be used for interrupt translation by the core.
This change restores LS1088A, LS2088A/LS2085A and LX2160A to their
previous bindings, which allows these systems to continue to use
external interrupt lines with the correct polarity.
1) Fix a kernel-info-leak in pfkey.
From Haimin Zhang.
2) Fix an incorrect check of the return value of ipv6_skip_exthdr.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
esp6: fix check on ipv6_skip_exthdr's return value
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
====================
Jakub Kicinski [Wed, 16 Mar 2022 18:08:09 +0000 (11:08 -0700)]
Merge tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.17
Third set of fixes for v5.17. We have only one revert to fix an ath10k
regression.
* tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "ath10k: drop beacon and probe response which leak from other channel"
====================
drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
If display timings were read from the devicetree using
of_get_display_timing() and pixelclk-active is defined
there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is
automatically generated. Through the function
drm_bus_flags_from_videomode() e.g. called in the
panel-simple driver this flag got into the bus flags,
but then in imx_pd_bridge_atomic_check() the bus flag
check failed and will not initialize the display. The
original commit fe141cedc433 does not explain why this
check was introduced. So remove the bus flags check,
because it stops the initialization of the display with
valid bus flags.
Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when available") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Marek Vasut <marex@denx.de> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org
To: dri-devel@lists.freedesktop.org Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220201113643.4638-1-cniedermaier@dh-electronics.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
I was reported privately that this commit breaks AP and mesh mode on QCA9984
(firmware 10.4-3.9.0.2-00156). So revert the commit to fix the regression.
There was a conflict due to cfg80211 API changes but that was easy to fix.
Revert "ACPI: scan: Do not add device IDs from _CID if _HID is not valid"
Revert commit e38f9ff63e6d ("ACPI: scan: Do not add device IDs from _CID
if _HID is not valid"), because it has introduced regressions on
multiple systems, even though it only has effect on clearly invalid
firmware.
Reported-by: Pierre-Louis Bossart <notifications@github.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jiasheng Jiang [Mon, 14 Mar 2022 02:01:25 +0000 (10:01 +0800)]
hv_netvsc: Add check for kvmalloc_array
As the potential failure of the kvmalloc_array(),
it should be better to check and restore the 'data'
if fails in order to avoid the dereference of the
NULL pointer.
projects / kernel.git / log