Tuong Lien [Tue, 26 May 2020 09:38:37 +0000 (16:38 +0700)]
tipc: add support for broadcast rcv stats dumping
This commit enables dumping the statistics of a broadcast-receiver link
like the traditional 'broadcast-link' one (which is for broadcast-
sender). The link dumping can be triggered via netlink (e.g. the
iproute2/tipc tool) by the link flag - 'TIPC_NLA_LINK_BROADCAST' as the
indicator.
The name of a broadcast-receiver link of a specific peer will be in the
format: 'broadcast-link:<peer-id>'.
In addition, the broadcast-receiver link statistics can be reset in the
usual way via netlink by specifying that link name in command.
Note: the 'tipc_link_name_ext()' is removed because the link name can
now be retrieved simply via the 'l->name'.
Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Tue, 26 May 2020 09:38:36 +0000 (16:38 +0700)]
tipc: enable broadcast retrans via unicast
In some environment, broadcast traffic is suppressed at high rate (i.e.
a kind of bandwidth limit setting). When it is applied, TIPC broadcast
can still run successfully. However, when it comes to a high load, some
packets will be dropped first and TIPC tries to retransmit them but the
packet retransmission is intentionally broadcast too, so making things
worse and not helpful at all.
This commit enables the broadcast retransmission via unicast which only
retransmits packets to the specific peer that has really reported a gap
i.e. not broadcasting to all nodes in the cluster, so will prevent from
being suppressed, and also reduce some overheads on the other peers due
to duplicates, finally improve the overall TIPC broadcast performance.
Note: the functionality can be turned on/off via the sysctl file:
Default is '0', i.e. the broadcast retransmission still works as usual.
Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Tue, 26 May 2020 09:38:35 +0000 (16:38 +0700)]
tipc: add back link trace events
In the previous commit ("tipc: add Gap ACK blocks support for broadcast
link"), we have removed the following link trace events due to the code
changes:
- tipc_link_bc_ack
- tipc_link_retrans
This commit adds them back along with some minor changes to adapt to
the new code.
Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Tue, 26 May 2020 09:38:34 +0000 (16:38 +0700)]
tipc: introduce Gap ACK blocks for broadcast link
As achieved through commit c681e8017679 ("tipc: improve TIPC throughput
by Gap ACK blocks"), we apply the same mechanism for the broadcast link
as well. The 'Gap ACK blocks' data field in a 'PROTOCOL/STATE_MSG' will
consist of two parts built for both the broadcast and unicast types:
We also increase the max number of Gap ACK blocks to 128, allowing upto
64 blocks per type (total buffer size = 516 bytes).
Besides, the 'tipc_link_advance_transmq()' function is refactored which
is applicable for both the unicast and broadcast cases now, so some old
functions can be removed and the code is optimized.
With the patch, TIPC broadcast is more robust regardless of packet loss
or disorder, latency, ... in the underlying network. Its performance is
boost up significantly.
For example, experiment with a 5% packet loss rate results:
$ time tipc-pipe --mc --rdm --data_size 123 --data_num 1500000
real 0m 42.46s
user 0m 1.16s
sys 0m 17.67s
Without the patch:
$ time tipc-pipe --mc --rdm --data_size 123 --data_num 1500000
real 8m 27.94s
user 0m 0.55s
sys 0m 2.38s
Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Basson [Tue, 26 May 2020 06:41:20 +0000 (09:41 +0300)]
qed: Add EDPM mode type for user-fw compatibility
In older FW versions the completion flag was treated as the ack flag in
edpm messages. Expose the FW option of setting which mode the QP is in
by adding a flag to the qedr <-> qed API.
Flag is added for backward compatibility with libqedr.
This flag will be set by qedr after determining whether the libqedr is
using the updated version.
Fixes: 20cdcc5122df ("qed: Add support for QP verbs") Signed-off-by: Yuval Basson <yuval.bason@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 26 May 2020 03:15:24 +0000 (20:15 -0700)]
tcp: tcp_v4_err() icmp skb is named icmp_skb
I missed the fact that tcp_v4_err() differs from tcp_v6_err().
After commit e182eb83c960 ("Rename skb to icmp_skb in tcp_v4_err()")
the skb argument has been renamed to icmp_skb only in one function.
I will in a future patch reconciliate these functions to avoid
this kind of confusion.
Fixes: c65e820c85fe ("tcp: allow traceroute -Mtcp for unpriv users") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 25 May 2020 09:55:41 +0000 (09:55 +0000)]
bridge: mrp: Fix out-of-bounds read in br_mrp_parse
The issue was reported by syzbot. When the function br_mrp_parse was
called with a valid net_bridge_port, the net_bridge was an invalid
pointer. Therefore the check br->stp_enabled could pass/fail
depending where it was pointing in memory.
The fix consists of setting the net_bridge pointer if the port is a
valid pointer.
Reported-by: syzbot+9c6f0f1f8e32223df9a4@syzkaller.appspotmail.com Fixes: c81211ee2e45 ("bridge: mrp: Integrate MRP into the bridge") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Wenhu [Mon, 25 May 2020 06:29:51 +0000 (23:29 -0700)]
drivers: ipa: print dev_err info accurately
Print certain name string instead of hard-coded "memory" for dev_err
output, which would be more accurate and helpful for debugging.
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Cc: Alex Elder <elder@kernel.org> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 24 May 2020 18:27:10 +0000 (11:27 -0700)]
ptp_clock: Let the ADJ_OFFSET interface respect the ADJ_NANO flag for PHC devices.
In commit 59e25482dd7119e095a3ee10a3852b0572ef6b9c ("ptp: Add adjphase
function to support phase offset control.") the PTP Hardware Clock
interface expanded to support the ADJ_OFFSET offset mode. However,
the implementation did not respect the traditional yet pedantic
distinction between units of microseconds and nanoseconds signaled by
the ADJ_NANO flag. This patch fixes the issue by adding logic to
handle that flag.
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 24 May 2020 18:00:02 +0000 (11:00 -0700)]
tcp: allow traceroute -Mtcp for unpriv users
Unpriv users can use traceroute over plain UDP sockets, but not TCP ones.
$ traceroute -Mtcp 8.8.8.8
You do not have enough privileges to use this traceroute method.
$ traceroute -n -Mudp 8.8.8.8
traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets
1 192.168.86.1 3.631 ms 3.512 ms 3.405 ms
2 10.1.10.1 4.183 ms 4.125 ms 4.072 ms
3 96.120.88.125 20.621 ms 19.462 ms 20.553 ms
4 96.110.177.65 24.271 ms 25.351 ms 25.250 ms
5 69.139.199.197 44.492 ms 43.075 ms 44.346 ms
6 68.86.143.93 27.969 ms 25.184 ms 25.092 ms
7 96.112.146.18 25.323 ms 96.112.146.22 25.583 ms 96.112.146.26 24.502 ms
8 72.14.239.204 24.405 ms 74.125.37.224 16.326 ms 17.194 ms
9 209.85.251.9 18.154 ms 209.85.247.55 14.449 ms 209.85.251.9 26.296 ms^C
We can easily support traceroute over TCP, by queueing an error message
into socket error queue.
Note that applications need to set IP_RECVERR/IPV6_RECVERR option to
enable this feature, and that the error message is only queued
while in SYN_SNT state.
Suggested-by: Maciej Żenczykowski <maze@google.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 23 May 2020 19:46:49 +0000 (12:46 -0700)]
bnx2x: allow bnx2x_bsc_read() to schedule
bnx2x_warpcore_read_sfp_module_eeprom() can call bnx2x_bsc_read()
three times before giving up.
This causes latency blips of at least 31 ms (58 ms being reported
by our teams)
Convert the long lasting loops of udelay() to usleep_range() ones,
and breaks the loops on precise time tracking.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ariel Elior <aelior@marvell.com> Cc: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Sat, 23 May 2020 17:46:48 +0000 (20:46 +0300)]
ipv4: potential underflow in compat_ip_setsockopt()
The value of "n" is capped at 0x1ffffff but it checked for negative
values. I don't think this causes a problem but I'm not certain and
it's harmless to prevent it.
Fixes: 5b6d191426cd ("ipv4: do compat setsockopt for MCAST_MSFILTER directly") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: feeface2e67a ("vxlan: ecmp support for mac fdb entries") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 25 May 2020 02:32:23 +0000 (19:32 -0700)]
Merge branch 'mlxsw-Various-trap-changes-part-1'
Ido Schimmel says:
====================
mlxsw: Various trap changes - part 1
This patch set contains various changes in mlxsw trap configuration.
Another set will perform similar changes before exposing control traps
(e.g., IGMP query, ARP request) via devlink-trap.
Tested with existing devlink-trap selftests. Please see individual
patches for a detailed changelog.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 24 May 2020 21:51:01 +0000 (00:51 +0300)]
mlxsw: spectrum_buffers: Assign non-zero quotas to TC 0 of the CPU port
As explained in commit aa17a9ec16aa ("mlxsw: spectrum: Allow packets to
be trapped from any PG"), incoming packets can be admitted to the shared
buffer and forwarded / trapped, if:
Trapped packets are scheduled to transmission through the CPU port.
Currently, the minimum and maximum quotas of traffic class (TC) 0 of the
CPU port are 0, which means it is not usable.
Assign non-zero quotas to TC 0 of the CPU port, so that it could be
utilized by subsequent patches.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 24 May 2020 21:51:00 +0000 (00:51 +0300)]
mlxsw: spectrum: Change default rate and priority of DHCP packets
Reduce the default acceptable rate of DHCP packets to 128 packets per
second and reduce their priority. This is reasonable given the Spectrum
ASICs are limited to 128 ports at the moment.
These are only the default values. Users will be able to modify them via
devlink-trap.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 24 May 2020 21:50:59 +0000 (00:50 +0300)]
mlxsw: spectrum: Trap IPv4 DHCP packets in router
Currently, IPv4 DHCP packets are trapped during L2 forwarding, which
means that packets might be trapped unnecessarily. Instead, only trap
the DHCP packets that reach the router. Either because they were flooded
to the router port or forwarded to it by the FDB. This is consistent
with the corresponding IPv6 trap.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 24 May 2020 17:24:10 +0000 (10:24 -0700)]
Merge tag 'efi-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
"A set of EFI fixes:
- Don't return a garbage screen info when EFI framebuffer is not
available
- Make the early EFI console work properly with wider fonts instead
of drawing garbage
- Prevent a memory buffer leak in allocate_e820()
- Print the firmware error record properly so it can be decoded by
users
- Fix a symbol clash in the host tool build which only happens with
newer compilers.
- Add a missing check for the event log version of TPM which caused
boot failures on several Dell systems due to an attempt to decode
SHA-1 format with the crypto agile algorithm"
* tag 'efi-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tpm: check event log version before reading final events
efi: Pull up arch-specific prototype efi_systab_show_arch()
x86/boot: Mark global variables as static
efi: cper: Add support for printing Firmware Error Record Reference
efi/libstub/x86: Avoid EFI map buffer alloc in allocate_e820()
efi/earlycon: Fix early printk for wider fonts
efi/libstub: Avoid returning uninitialized data from setup_graphics()
Linus Torvalds [Sun, 24 May 2020 17:21:02 +0000 (10:21 -0700)]
Merge tag 'x86-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Unbreak stack dumps for inactive tasks by interpreting the special
first frame left by __switch_to_asm() correctly.
The recent change not to skip the first frame so ORC and frame
unwinder behave in the same way caused all entries to be
unreliable, i.e. prepended with '?'.
- Use cpumask_available() instead of an implicit NULL check of a
cpumask_var_t in mmio trace to prevent a Clang build warning"
* tag 'x86-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks
x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables
Linus Torvalds [Sun, 24 May 2020 17:14:58 +0000 (10:14 -0700)]
Merge tag 'sched-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of fixes for the scheduler:
- Fix handling of throttled parents in enqueue_task_fair() completely.
The recent fix overlooked a corner case where the first iteration
terminates due to an entity already being on the runqueue which
makes the list management incomplete and later triggers the
assertion which checks for completeness.
- Fix a similar problem in unthrottle_cfs_rq().
- Show the correct uclamp values in procfs which prints the effective
value twice instead of requested and effective"
* tag 'sched-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list
sched/debug: Fix requested task uclamp values shown in procfs
sched/fair: Fix enqueue_task_fair() warning some more
1) Fix RCU warnings in ipv6 multicast router code, from Madhuparna
Bhowmik.
2) Nexthop attributes aren't being checked properly because of
mis-initialized iterator, from David Ahern.
3) Revert iop_idents_reserve() change as it caused performance
regressions and was just working around what is really a UBSAN bug
in the compiler. From Yuqi Jin.
4) Read MAC address properly from ROM in bmac driver (double iteration
proceeds past end of address array), from Jeremy Kerr.
5) Add Microsoft Surface device IDs to r8152, from Marc Payne.
6) Prevent reference to freed SKB in __netif_receive_skb_core(), from
Boris Sukholitko.
7) Fix ACK discard behavior in rxrpc, from David Howells.
8) Preserve flow hash across packet scrubbing in wireguard, from Jason
A. Donenfeld.
9) Cap option length properly for SO_BINDTODEVICE in AX25, from Eric
Dumazet.
10) Fix encryption error checking in kTLS code, from Vadim Fedorenko.
11) Missing BPF prog ref release in flow dissector, from Jakub Sitnicki.
12) dst_cache must be used with BH disabled in tipc, from Eric Dumazet.
13) Fix use after free in mlxsw driver, from Jiri Pirko.
14) Order kTLS key destruction properly in mlx5 driver, from Tariq
Toukan.
15) Check devm_platform_ioremap_resource() return value properly in
several drivers, from Tiezhu Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
net: smsc911x: Fix runtime PM imbalance on error
net/mlx4_core: fix a memory leak bug.
net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend
net: phy: mscc: fix initialization of the MACsec protocol mode
net: stmmac: don't attach interface until resume finishes
net: Fix return value about devm_platform_ioremap_resource()
net/mlx5: Fix error flow in case of function_setup failure
net/mlx5e: CT: Correctly get flow rule
net/mlx5e: Update netdev txq on completions during closure
net/mlx5: Annotate mutex destroy for root ns
net/mlx5: Don't maintain a case of del_sw_func being null
net/mlx5: Fix cleaning unmanaged flow tables
net/mlx5: Fix memory leak in mlx5_events_init
net/mlx5e: Fix inner tirs handling
net/mlx5e: kTLS, Destroy key object after destroying the TIS
net/mlx5e: Fix allowed tc redirect merged eswitch offload cases
net/mlx5: Avoid processing commands before cmdif is ready
net/mlx5: Fix a race when moving command interface to events mode
net/mlx5: Add command entry handling completion
rxrpc: Fix a memory leak in rxkad_verify_response()
...
Heiner Kallweit [Sat, 23 May 2020 15:40:25 +0000 (17:40 +0200)]
ethtool: propagate get_coalesce return value
get_coalesce returns 0 or ERRNO, but the return value isn't checked.
The returned coalesce data may be invalid if an ERRNO is set,
therefore better check and propagate the return value.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: provide a devres variant of register_netdev()
Using devres helpers allows to shrink the probing code, avoid memory leaks in
error paths make sure the order in which resources are freed is the exact
opposite of their allocation. This series proposes to add a devres variant
of register_netdev() that will only work with net_device structures whose
memory is also managed.
First we add the missing documentation entry for the only other networking
devres helper: devm_alloc_etherdev().
Next we move devm_alloc_etherdev() into a separate source file.
We then use a proxy structure in devm_alloc_etherdev() to improve readability.
Last: we implement devm_register_netdev() and use it in mtk-eth-mac driver.
v1 -> v2:
- rebase on top of net-next after driver rename, no functional changes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide devm_register_netdev() - a device resource managed variant
of register_netdev(). This new helper will only work for net_device
structs that are also already managed by devres.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: devres: define a separate devres structure for devm_alloc_etherdev()
Not using a proxy structure to store struct net_device doesn't save
anything in terms of compiled code size or memory usage but significantly
decreases the readability of the code with all the pointer casting.
Define struct net_device_devres and use it in devm_alloc_etherdev_mqs().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: move devres helpers into a separate source file
There's currently only a single devres helper in net/ - devm variant
of alloc_etherdev. Let's move it to net/devres.c with the intention of
assing a second one: devm_register_netdev(). This new routine will need
to know the address of the release function of devm_alloc_etherdev() so
that it can verify (using devres_find()) that the struct net_device
that's being passed to it is also resource managed.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 23 May 2020 11:21:36 +0000 (13:21 +0200)]
r8169: remove mask argument from rtl_w0w1_eri
rtl_eri_read() returns the full 32bit value, therefore there's no
benefit in writing back parts of it only. handle it like the vendor
driver and write the full 32 bit always. Omitting the mask argument
avoids some overhead and makes the code better readable.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 23 May 2020 23:51:26 +0000 (16:51 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2020-05-22
This series contains updates to virtchnl and the ice driver.
Geert Uytterhoeven fixes a data structure alignment issue in the
virtchnl structures.
Henry adds Flow Director support which allows for the redirection on
ntuple rules over six patches. Initially Henry adds the initial
infrastructure for Flow Director, and then later adds IPv4 and IPv6
support, as well as being able to display the ntuple rules.
Bret add Accelerated Receive Flow Steering (aRFS) support which is used
to steer receive flows to a specific queue. Fixes a transmit timeout
when the VF link transitions from up/down/up because the transmit and
receive queue interrupts are not enabled as part of VF's link up. Fixed
an issue when the default VF LAN address is changed and after reset the
PF will attempt to add the new MAC, which fails because it already
exists. This causes the VF to be disabled completely until it is removed
and enabled via sysfs.
Anirudh (Ani) makes a fix where the ice driver needs to call set_mac_cfg
to enable jumbo frames, so ensure it gets called during initialization
and after reset. Fix bad register reads during a register dump in
ethtool by removing the bad registers.
Paul fixes an issue where the receive Malicious Driver Detection (MDD)
auto reset message was not being logged because it occurred after the VF
reset.
Victor adds a check for compatibility between the Dynamic Device
Personalization (DDP) package and the NIC firmware to ensure that
everything aligns.
Jesse fixes a administrative queue string call with the appropriate
error reporting variable. Also fixed the loop variables that are
comparing or assigning signed against unsigned values.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 23 May 2020 23:47:41 +0000 (16:47 -0700)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2020-05-22
This series contains updates to e1000e, igc and igb.
Many of the patches in this series are fixes, but many of the igc fixes
are based on the recent filter rule handling Andre has been working,
which will not backport to earlier/stable kernels. The remaining fixes
for e1000e and igb have CC'd stable where applicable.
Andre continue with his refactoring of the filter rule code to help with
reducing the complexity, in multiple patches. Fix the inconsistent size
of a struct field. Fixed an issue where filter rules stay active in the
hardware, even after it was deleted, so make sure to disable the filter
rule before deleting. Fixed an issue with NFC rules which were dropping
valid multicast MAC address. Fixed how the NFC rules are restored after
the NIC is reset or brought up, so that they are restored in the same order
they were initially setup in. Fix a potential memory leak when the
driver is unloaded and the NFC rules are not flushed from memory
properly. Fixed how NFC rule validation handles when a request to
overwrite an existing rule. Changed the locking around the NFC rule API
calls from spin_locks to mutex locks to avoid unnecessary busy waiting
on lock contention.
Sasha clean up more unused code in the igc driver.
Kai-Heng Feng from Canonical provides three fixes, first has igb report
the speed and duplex as unknown when in runtime suspend. Fixed e1000e
to pass up the error when disabling ULP mode. Fixed e1000e performance
by disabling TSO by default for certain MACs.
Vitaly disables S0ix entry and exit flows for ME systems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 23 May 2020 23:39:45 +0000 (16:39 -0700)]
Merge tag 'mlx5-fixes-2020-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2020-05-22
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.13
('net/mlx5: Add command entry handling completion')
For -stable v5.2
('net/mlx5: Fix error flow in case of function_setup failure')
('net/mlx5: Fix memory leak in mlx5_events_init')
For -stable v5.3
('net/mlx5e: Update netdev txq on completions during closure')
('net/mlx5e: kTLS, Destroy key object after destroying the TIS')
('net/mlx5e: Fix inner tirs handling')
For -stable v5.6
('net/mlx5: Fix cleaning unmanaged flow tables')
('net/mlx5: Fix a race when moving command interface to events mode')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 23 May 2020 23:37:00 +0000 (16:37 -0700)]
Merge tag 'mlx5-updates-2020-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-05-22
This series includes two updates and one cleanup patch
1) Tang Bim, clean-up with IS_ERR() usage
2) Vlad introduces a new mlx5 kconfig flag for TC support
This is required due to the high volume of current and upcoming
development in the eswitch and representors areas where some of the
feature are TC based such as the downstream patches of MPLSoUDP and
the following representor bonding support for VF live migration and
uplink representor dynamic loading.
For this Vlad kept TC specific code in tc.c and rep/tc.c and
organized non TC code in representors specific files.
3) Eli Cohen adds support for MPLS over UPD encap and decap TC offloads.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 22 May 2020 20:05:26 +0000 (13:05 -0700)]
net: psample: fix build error when CONFIG_INET is not enabled
Fix psample build error when CONFIG_INET is not set/enabled by
bracketing the tunnel code in #ifdef CONFIG_NET / #endif.
../net/psample/psample.c: In function ‘__psample_ip_tun_to_nlattr’:
../net/psample/psample.c:216:25: error: implicit declaration of function ‘ip_tunnel_info_opts’; did you mean ‘ip_tunnel_info_opts_set’? [-Werror=implicit-function-declaration]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Yotam Gigi <yotam.gi@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Qiushi Wu [Fri, 22 May 2020 19:07:15 +0000 (14:07 -0500)]
net/mlx4_core: fix a memory leak bug.
In function mlx4_opreq_action(), pointer "mailbox" is not released,
when mlx4_cmd_box() return and error, causing a memory leak bug.
Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can
free this pointer.
Fixes: 5c77a18442fb ("net/mlx4_core: Respond to operation request by firmware") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend
vlan_for_each() are required to be called with rtnl_lock taken, otherwise
ASSERT_RTNL() warning will be triggered - which happens now during System
resume from suspend:
cpsw_suspend()
|- cpsw_ndo_stop()
|- __hw_addr_ref_unsync_dev()
|- cpsw_purge_all_mc()
|- vlan_for_each()
|- ASSERT_RTNL();
Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls.
Fixes: f5ffcc44a804 ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Fri, 22 May 2020 15:55:45 +0000 (17:55 +0200)]
net: phy: mscc: fix initialization of the MACsec protocol mode
At the very end of the MACsec block initialization in the MSCC PHY
driver, the MACsec "protocol mode" is set. This setting should be set
based on the PHY id within the package, as the bank used to access the
register used depends on this. This was not done correctly, and only the
first bank was used leading to the two upper PHYs being unstable when
using the VSC8584. This patch fixes it.
Fixes: e6a3181c1674 ("net: phy: mscc: macsec initialization") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Yu [Fri, 22 May 2020 15:29:43 +0000 (23:29 +0800)]
net: stmmac: don't attach interface until resume finishes
Commit 54f8ac477fa3 ("net: stmmac: Delete txtimer in suspend") was the
first attempt to fix a race between mod_timer() and setup_timer()
during stmmac_resume(). However the issue still exists as the commit
only addressed half of the issue.
Same race can still happen as stmmac_resume() re-attaches interface
way too early - even before hardware is fully initialized. Worse,
doing so allows network traffic to restart and stmmac_tx_timer_arm()
being called in the middle of stmmac_resume(), which re-init tx timers
in stmmac_init_coalesce(). timer_list will be corrupted and system
crashes as a result of race between mod_timer() and setup_timer().
Michael Walle [Fri, 22 May 2020 09:53:31 +0000 (11:53 +0200)]
net: phy: at803x: fix PHY ID masks
Ever since its first commit fa8080c5281aa ("phy: add AT803x driver") the
PHY ID mask was set to 0xffffffef. It is unclear to me why this mask was
chosen in the first place. Both the AR8031/AR8033 and the AR8035
datasheets mention it is always the given value:
- for AR8031/AR8033 its 0x004d/0xd074
- for AR8035 its 0x004d/0xd072
Unfortunately, I don't have a datasheet for the AR8030. Therefore, we
leave its PHY ID mask untouched. For the PHYs mentioned before use the
handy PHY_ID_MATCH_EXACT() macro.
I've tried to contact the author of the initial commit, but received no
answer so far.
Cc: Matus Ujhelyi <ujhelyi.m@gmail.com> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Rapoport [Sat, 23 May 2020 19:57:18 +0000 (22:57 +0300)]
sparc32: fix page table traversal in srmmu_nocache_init()
The srmmu_nocache_init() uses __nocache_fix() macro to add an offset to
page table entry to access srmmu_nocache_pool.
But since sparc32 has only three actual page table levels, pgd, p4d and
pud are essentially the same thing and pgd_offset() and p4d_offset() are
no-ops, the __nocache_fix() should be done only at PUD level.
Remove __nocache_fix() for p4d_offset() and pud_offset() and keep it
only for PUD and lower levels.
Fixes: 5f6c4ea1794a ("sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Anatoly Pugachev <matorola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 23 May 2020 18:21:47 +0000 (11:21 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add files related to kdump
z3fold: fix use-after-free when freeing handles
sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()
MAINTAINERS: update email address for Naoya Horiguchi
sh: include linux/time_types.h for sockios
kasan: disable branch tracing for core runtime
selftests/vm/write_to_hugetlbfs.c: fix unused variable warning
selftests/vm/.gitignore: add mremap_dontunmap
rapidio: fix an error in get_user_pages_fast() error handling
x86: bitops: fix build regression
device-dax: don't leak kernel memory to user space after unloading kmem
Linus Torvalds [Sat, 23 May 2020 18:06:13 +0000 (11:06 -0700)]
Merge tag 'driver-core-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"So, turns out the kobject fix didn't quite work, so here are four
patches that in the end, result in just two driver core fixes for
reported issues that no one has had problems with.
The kobject patch that was originally in here has now been reverted,
as Guenter reported boot problems with it on some of his systems"
* tag 'driver-core-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "kobject: Make sure the parent does not get released before its children"
kobject: Make sure the parent does not get released before its children
driver core: Fix handling of SYNC_STATE_ONLY + STATELESS device links
driver core: Fix SYNC_STATE_ONLY device link implementation
Linus Torvalds [Sat, 23 May 2020 18:02:42 +0000 (11:02 -0700)]
Merge tag 'char-misc-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.7-rc7 that resolve
some reported issues. Included in here are tiny fixes for the mei,
coresight, rtsx, ipack, and mhi drivers.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: Add short delay after exit from ASPM
bus: mhi: core: Fix some error return code
ipack: tpci200: fix error return code in tpci200_register()
coresight: cti: remove incorrect NULL return check
mei: release me_cl object reference
Linus Torvalds [Sat, 23 May 2020 17:57:55 +0000 (10:57 -0700)]
Merge tag 'staging-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/iio fixes from Greg KH:
"Here are some small staging and IIO driver fixes for 5.7-rc7
Nothing major, just a collection of IIO driver fixes for reported
issues, and a few small staging driver fixes that people have found.
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wfx: unlock on error path
staging: greybus: Fix uninitialized scalar variable
staging: kpc2000: fix error return code in kp2000_pcie_probe()
iio: sca3000: Remove an erroneous 'get_device()'
iio: adc: stm32-dfsdm: fix device used to request dma
iio: adc: stm32-adc: fix device used to request dma
iio: adc: ti-ads8344: Fix channel selection
staging: iio: ad2s1210: Fix SPI reading
iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()'
iio: imu: st_lsm6dsx: unlock on error in st_lsm6dsx_shub_write_raw()
iio: chemical: atlas-sensor: correct DO-SM channels
Linus Torvalds [Sat, 23 May 2020 17:50:38 +0000 (10:50 -0700)]
Merge tag 'tty-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fix from Greg KH:
"Here is a single serial driver fix for 5.7-rc7. It resolves an issue
with the SiFive serial console init sequence that was reported a
number of times.
It has been in linux-next for a while now with no reported issues"
* tag 'tty-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: add missing spin_lock_init for SiFive serial console
Linus Torvalds [Sat, 23 May 2020 17:42:12 +0000 (10:42 -0700)]
Merge tag 's390-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Add missing R_390_JMP_SLOT relocation type in KASLR code.
- Fix set_huge_pte_at for empty ptes issue which has been uncovered
with arch page table helper tests.
- Correct initrd location for kdump kernel.
- Fix s390_mmio_read/write with MIO in PCI code.
* tag 's390-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/kaslr: add support for R_390_JMP_SLOT relocation type
s390/mm: fix set_huge_pte_at() for empty ptes
s390/kexec_file: fix initrd location for kdump kernel
s390/pci: Fix s390_mmio_read/write with MIO
Baoquan He [Sat, 23 May 2020 05:23:15 +0000 (22:23 -0700)]
MAINTAINERS: add files related to kdump
Kdump is implemented based on kexec, however some files are only related
to crash dumping and missing, add them to KDUMP entry.
Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Young <dyoung@redhat.com> Link: http://lkml.kernel.org/r/20200520103633.GW5029@MiWiFi-R3L-srv Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uladzislau Rezki [Sat, 23 May 2020 05:23:12 +0000 (22:23 -0700)]
z3fold: fix use-after-free when freeing handles
free_handle() for a foreign handle may race with inter-page compaction,
what can lead to memory corruption.
To avoid that, take write lock not read lock in free_handle to be
synchronized with __release_z3fold_page().
For example KASAN can detect it:
==================================================================
BUG: KASAN: use-after-free in LZ4_decompress_safe+0x2c4/0x3b8
Read of size 1 at addr ffffffc976695ca3 by task GoogleApiHandle/4121
CPU: 0 PID: 4121 Comm: GoogleApiHandle Tainted: P S OE 4.19.81-perf+ #162
Hardware name: Sony Mobile Communications. PDX-203(KONA) (DT)
Call trace:
LZ4_decompress_safe+0x2c4/0x3b8
lz4_decompress_crypto+0x3c/0x70
crypto_decompress+0x58/0x70
zcomp_decompress+0xd4/0x120
...
Apart from that, initialize zhdr->mapped_count in init_z3fold_page() and
remove "newpage" variable because it is not used anywhere.
Signed-off-by: Uladzislau Rezki <uladzislau.rezki@sony.com> Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Qian Cai <cai@lca.pw> Cc: Raymond Jennings <shentino@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200520082100.28876-1-vitaly.wool@konsulko.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Sat, 23 May 2020 05:23:09 +0000 (22:23 -0700)]
sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()
The kbuild test robot reported the following warning:
arch/sparc/mm/srmmu.c: In function 'srmmu_nocache_init': arch/sparc/mm/srmmu.c:300:9: error: variable 'pud' set but not used [-Werror=unused-but-set-variable]
300 | pud_t *pud;
This warning is caused by misprint in the page table traversal in
srmmu_nocache_init() function which accessed a PMD entry using PGD
rather than PUD.
Since sparc32 has only 3 page table levels, the PGD and PUD are
essentially the same and usage of __nocache_fix() removed the type
checking.
Use PUD for the consistency and to silence the compiler warning.
Fixes: ff4daf22041b5ce4a6 ("sparc32: use pgtable-nopud instead of 4level-fixup") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: David S. Miller <davem@davemloft.net> Cc: Anatoly Pugachev <matorola@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200520132005.GM1059226@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Sat, 23 May 2020 05:23:06 +0000 (22:23 -0700)]
MAINTAINERS: update email address for Naoya Horiguchi
My email address has changed due to system upgrade, so please update it
in MAINTAINERS list. My old address (n-horiguchi@ah.jp.nec.com) will be
still active for a few months.
Note that my email system has some encoding issue and can't send patches
in raw format via git-send-email. So patches from me will be delivered
via my free address (nao.horiguchi@gmail.com) or GitHub.
Arnd Bergmann [Sat, 23 May 2020 05:23:02 +0000 (22:23 -0700)]
sh: include linux/time_types.h for sockios
Using the socket ioctls on arch/sh (and only there) causes build time
problems when __kernel_old_timeval/__kernel_old_timespec are not already
visible to the compiler.
Add an explict include line for the header that defines these
structures.
Fixes: 3d28bac07f4f ("y2038: sh: remove timeval/timespec usage from headers") Fixes: d5bedf892fe7 ("net: socket: implement 64-bit timestamps") Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200519131327.1836482-1-arnd@arndb.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marco Elver [Sat, 23 May 2020 05:22:59 +0000 (22:22 -0700)]
kasan: disable branch tracing for core runtime
During early boot, while KASAN is not yet initialized, it is possible to
enter reporting code-path and end up in kasan_report().
While uninitialized, the branch there prevents generating any reports,
however, under certain circumstances when branches are being traced
(TRACE_BRANCH_PROFILING), we may recurse deep enough to cause kernel
reboots without warning.
To prevent similar issues in future, we should disable branch tracing
for the core runtime.
John Hubbard [Sat, 23 May 2020 05:22:48 +0000 (22:22 -0700)]
rapidio: fix an error in get_user_pages_fast() error handling
In the case of get_user_pages_fast() returning fewer pages than
requested, rio_dma_transfer() does not quite do the right thing. It
attempts to release all the pages that were requested, rather than just
the pages that were pinned.
Fix the error handling so that only the pages that were successfully
pinned are released.
Fixes: 64128ba4e067 ("rapidio: add mport char device driver") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200517235620.205225-2-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Assume we try to unload kmem. This force-unloading will work, even if
memory cannot get removed from the system.
[root@localhost ~]# rmmod kmem
[ 86.380228] removing memory fails, because memory [0x0000000150000000-0x0000000157ffffff] is onlined
...
[ 86.431225] kmem dax0.0: DAX region [mem 0x150000000-0x33fffffff] cannot be hotremoved until the next reboot
Now, we can reconfigure the namespace:
[root@localhost ~]# ndctl create-namespace --force --reconfig=namespace0.0 --mode=devdax
[ 131.409351] nd_pmem namespace0.0: could not reserve region [mem 0x140000000-0x33fffffff]dax
[ 131.410147] nd_pmem: probe of namespace0.0 failed with error -16namespace0.0 --mode=devdax
...
This fails as expected due to the busy memory resource, and the memory
cannot be used. However, the dax0.0 device is removed, and along its
name.
The name of the memory resource now points at freed memory (name of the
device):
We have to make sure to duplicate the string. While at it, remove the
superfluous setting of the name and fixup a stale comment.
Fixes: 6c2434b592fa ("device-dax: "Hotremove" persistent memory that is used like normal RAM") Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.3] Link: http://lkml.kernel.org/r/20200508084217.9160-2-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All my arm64be (arm64 big endian) boot tests crash with this
patch applied. Reverting it fixes the problem. Crash log and
bisect results (from pending-fixes branch) below.
And also:
arm64 images don't crash but report lots of "poison overwritten"
backtraces like the one below. On arm, I see "refcount_t:
underflow", also attached. I didn't bisect those, but given the
context I would suspect the same culprit.
Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200513151840.36400-1-heikki.krogerus@linux.intel.com Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: kernel test robot <rong.a.chen@intel.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "ethtool -d" handler reads registers in the ice_regs_dump_list array
and returns read values back to the userspace.
The register offsets PFINT0_ITR* are not valid as per the specification
and reading these causes a "unable to handle kernel paging request" bug
in the driver. Remove these registers from ice_regs_dump_list.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Victor Raj [Sat, 16 May 2020 00:36:34 +0000 (17:36 -0700)]
ice: check for compatibility between DDP package and firmware
Require the Dynamic Device Personalization (DDP) file to have the same
major version number and the same or older minor number than the firmware
version major and minor, respectively.
Check the OS and NVM package versions before downloading the package.
If the OS package version is not compatible with NVM then return an
appropriate error.
Split the 32-byte segment name into a 28-byte segment name and
a 4-byte Track-ID. Older packages will still work with this change
because no package has a name that will take up more than 28 bytes;
in this case the Track-ID will be 0.
Note that the driver will store the segment name as 32-bytes in the
ice_hw structure, in order to normalize the length of the various
package name strings that it uses.
Also add section ID and structure for the segment metadata section.
Signed-off-by: Victor Raj <victor.raj@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Brett Creeley [Sat, 16 May 2020 00:36:33 +0000 (17:36 -0700)]
ice: Check if unicast MAC exists before setting VF MAC
Currently if a unicast MAC is set via ndo_set_vf_mac, the PF driver will
set the VF's dflt_lan_addr.addr once some basic checks have passed. The
VF is then reset. During reset the PF driver will attempt to program the
VF's MAC from the dflt_lan_addr.addr field. This fails when the MAC
already exists on the PF's switch.
This is causing the VF to be completely disabled until removing/enabling
any VFs via sysfs.
Fix this by checking if the unicast MAC exists before triggering a VF
reset directly in ndo_set_vf_mac. Also, add a check if the unicast MAC
is set to the same value as before and return 0 if that is the case.
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Brett Creeley [Sat, 16 May 2020 00:36:32 +0000 (17:36 -0700)]
ice: Fix Tx timeout when link is toggled on a VF's interface
Currently if the iavf is loaded and a VF link transitions from up to
down to up again a Tx timeout will be triggered. This happens because
Tx/Rx queue interrupts are only enabled when receiving the
VIRTCHNL_OP_CONFIG_MAP_IRQ message, which happens on reset or initial
iavf driver load, but not when bringing link up. This is problematic
because they are disabled on the VIRTCHNL_OP_DISABLE_QUEUES message,
which is part of bringing a VF's link down. However, they are not
enabled on the VIRTCHNL_OP_ENABLE_QUEUES message, which is part of
bringing a VF's link up.
Fix this by re-enabling the VF's Rx and Tx queue interrupts when they
were previously configured. This is done by first checking to make
sure the previous value in QINT_[R|T]QCTL.MSIX_INDX is not 0, which
is used to represent the OICR in the VF's interrupt space. If the
MSIX_INDX is non-zero then enable the interrupt by setting the
QINT_[R|T]CTL.CAUSE_ENA bit to 1.
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Paul Greenwalt [Sat, 16 May 2020 00:36:31 +0000 (17:36 -0700)]
ice: print Rx MDD auto reset message before VF reset
Rx MDD auto reset message was not being logged because logging occurred
after the VF reset and the VF MDD data was reinitialized.
Log the Rx MDD auto reset message before triggering the VF reset.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
As per the specification, the driver needs to call set_mac_cfg
(opcode 0x0603) to be able to exercise jumbo frames. Call the
function during initialization and the post reset rebuild flow.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Brett Creeley [Tue, 12 May 2020 01:01:46 +0000 (18:01 -0700)]
ice: Implement aRFS
Enable accelerated Receive Flow Steering (aRFS). It is used to steer Rx
flows to a specific queue. This functionality is triggered by the network
stack through ndo_rx_flow_steer and requires Flow Director (ntuple on) to
function.
The fltr_info is used to add/remove/update flow rules in the HW, the
fltr_state is used to determine what to do with the filter with respect
to HW and/or SW, and the flow_id is used in co-ordination with the
network stack.
The work for aRFS is split into two paths: the ndo_rx_flow_steer
operation and the ice_service_task. The former is where the kernel hands
us an Rx SKB among other items to setup aRFS and the latter is where
the driver adds/updates/removes filter rules from HW and updates filter
state.
In the Rx path the following things can happen:
1. New aRFS entries are added to the hash table and the state is
set to ICE_ARFS_INACTIVE so the filter can be updated in HW
by the ice_service_task path.
2. aRFS entries have their Rx Queue updated if we receive a
pre-existing flow_id and the filter state is ICE_ARFS_ACTIVE.
The state is set to ICE_ARFS_INACTIVE so the filter can be
updated in HW by the ice_service_task path.
3. aRFS entries marked as ICE_ARFS_TODEL are deleted
In the ice_service_task path the following things can happen:
1. New aRFS entries marked as ICE_ARFS_INACTIVE are added or
updated in HW.
and their state is updated to ICE_ARFS_ACTIVE.
2. aRFS entries are deleted from HW and their state is updated
to ICE_ARFS_TODEL.
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Henry Tieman [Tue, 12 May 2020 01:01:45 +0000 (18:01 -0700)]
ice: Restore filters following reset
Following a reset, Flow Director filters are cleared from the hardware.
Rebuild the filters using the software structures containing the filter
rules.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Henry Tieman [Tue, 12 May 2020 01:01:44 +0000 (18:01 -0700)]
ice: Enable flex-bytes support
Flex-bytes allows for packet matching based on an offset and value. This
is supported via the ethtool user-def option. It is specified by providing
an offset followed by a 2 byte match value. Offset is measured from the
start of the MAC address.
The following restrictions apply to flex-bytes. The specified offset must
be an even number and be smaller than 0x1fe.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Sat, 23 May 2020 04:43:02 +0000 (21:43 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes, two in drivers, one to fix a hang after reset with
iSCSI, and one to avoid a spurious log message; and the final core one
to correct a suspend/resume miscount with quiesced devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Put lun_ref at end of tmr processing
scsi: pm: Balance pm_only counter of request queue during system resume
scsi: qla2xxx: Do not log message when reading port speed via sysfs
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Sat, 23 May 2020 04:37:09 +0000 (21:37 -0700)]
Merge tag 'drm-fixes-2020-05-23' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Things seemed to have quieten down, though no i915 pull (I even gave
them an extra 12 hours in case they were late).
The amdgpu floating point fix is probably the largest, but it just
moves some code around to it doesn't do fpu stuff outside the fpu
boundaries. Otherwise it's just a couple of vmwgfx fixes (maintainer
change) and two etnaviv fixes.
vmwgfx:
- change maintainers
- fix redundant assignment
- fix parameter name
- fix return value
etnaviv:
- memory leak fix when userspace passes a invalid softpin address
- off-by-one crashing the kernel in the perfmon domain iteration when
the GPU core has both 2D and 3D capabilities
* tag 'drm-fixes-2020-05-23' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Defer cursor lock until after VUPDATE
drm/amd/display: Remove dml_common_def file
drm/amd/display: DP training to set properly SCRAMBLING_DISABLE
drm/edid: Add Oculus Rift S to non-desktop list
drm/etnaviv: Fix a leak in submit_pin_objects()
drm/etnaviv: fix perfmon domain interation
drm/vmwgfx: Return true in function vmw_fence_obj_signaled()
drm/vmwgfx: remove redundant assignment to variable ret
drm/vmwgfx: Fix parameter name in vmw_bo_init
drm/vmwgfx: update MAINTAINERS entry
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Henry Tieman [Tue, 12 May 2020 01:01:41 +0000 (18:01 -0700)]
ice: Support displaying ntuple rules
Add functionality for ethtool --show-ntuple, allowing for filters to be
displayed when set functionality is added. Add statistics related to
Flow Director matches and status.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Henry Tieman [Tue, 12 May 2020 01:01:40 +0000 (18:01 -0700)]
ice: Initialize Flow Director resources
Flow Director allows for redirection based on ntuple rules. Rules are
programmed using the ethtool set-ntuple interface. Supported actions are
redirect to queue and drop.
Setup the initial framework to process Flow Director filters. Create and
allocate resources to manage and program filters to the hardware. Filters
are processed via a sideband interface; a control VSI is created to manage
communication and process requests through the sideband. Upon allocation of
resources, update the hardware tables to accept perfect filters.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 8 day(s) which contain
a total of 109 files changed, 2776 insertions(+), 2887 deletions(-).
The main changes are:
1) Add a new AF_XDP buffer allocation API to the core in order to help
lowering the bar for drivers adopting AF_XDP support. i40e, ice, ixgbe
as well as mlx5 have been moved over to the new API and also gained a
small improvement in performance, from Björn Töpel and Magnus Karlsson.
2) Add getpeername()/getsockname() attach types for BPF sock_addr programs
in order to allow for e.g. reverse translation of load-balancer backend
to service address/port tuple from a connected peer, from Daniel Borkmann.
3) Improve the BPF verifier is_branch_taken() logic to evaluate pointers
being non-NULL, e.g. if after an initial test another non-NULL test on
that pointer follows in a given path, then it can be pruned right away,
from John Fastabend.
4) Larger rework of BPF sockmap selftests to make output easier to understand
and to reduce overall runtime as well as adding new BPF kTLS selftests
that run in combination with sockmap, also from John Fastabend.
5) Batch of misc updates to BPF selftests including fixing up test_align
to match verifier output again and moving it under test_progs, allowing
bpf_iter selftest to compile on machines with older vmlinux.h, and
updating config options for lirc and v6 segment routing helpers, from
Stanislav Fomichev, Andrii Nakryiko and Alan Maguire.
6) Conversion of BPF tracing samples outdated internal BPF loader to use
libbpf API instead, from Daniel T. Lee.
7) Follow-up to BPF kernel test infrastructure in order to fix a flake in
the XDP selftests, from Jesper Dangaard Brouer.
8) Minor improvements to libbpf's internal hashmap implementation, from
Ian Rogers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Lifshits [Thu, 7 May 2020 17:14:06 +0000 (20:14 +0300)]
e1000e: disable s0ix entry and exit flows for ME systems
Since ME systems do not support SLP_S0 in S0ix state, and S0ix entry
and exit flows may cause errors on them it is best to avoid using
e1000e_s0ix_entry_flow and e1000e_s0ix_exit_flow functions.
This was done by creating a struct of all devices that comes with ME
and by checking if the current device has ME.
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Kai-Heng Feng [Thu, 7 May 2020 14:21:07 +0000 (22:21 +0800)]
e1000e: Disable TSO for buffer overrun workaround
Commit f9ea1821f5e2 ("e1000e: fix buffer overrun while the I219 is
processing DMA transactions") imposes roughly 30% performance penalty.
The commit log states that "Disabling TSO eliminates performance loss
for TCP traffic without a noticeable impact on CPU performance", so
let's disable TSO by default to regain the loss.
CC: stable <stable@vger.kernel.org> Fixes: f9ea1821f5e2 ("e1000e: fix buffer overrun while the I219 is processing DMA transactions") BugLink: https://bugs.launchpad.net/bugs/1802691 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
projects / kernel.git / log