Xin Long [Thu, 29 Oct 2020 07:04:55 +0000 (15:04 +0800)]
udp: check udp sock encap_type in __udp_lib_err
There is a chance that __udp4/6_lib_lookup() returns a udp encap
sock in __udp_lib_err(), like the udp encap listening sock may
use the same port as remote encap port, in which case it should
go to __udp4/6_lib_err_encap() for more validation before
processing the icmp packet.
This patch is to check encap_type in __udp_lib_err() for the
further validation for a encap sock.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King [Thu, 29 Oct 2020 16:09:03 +0000 (16:09 +0000)]
net: dsa: mv88e6xxx: fix vlan setup
DSA assumes that a bridge which has vlan filtering disabled is not
vlan aware, and ignores all vlan configuration. However, the kernel
software bridge code allows configuration in this state.
This causes the kernel's idea of the bridge vlan state and the
hardware state to disagree, so "bridge vlan show" indicates a correct
configuration but the hardware lacks all configuration. Even worse,
enabling vlan filtering on a DSA bridge immediately blocks all traffic
which, given the output of "bridge vlan show", is very confusing.
Allow the VLAN configuration to be updated on Marvell DSA bridges,
otherwise we end up cutting all traffic when enabling vlan filtering.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/E1kYAU3-00071C-1G@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Bulwahn [Wed, 28 Oct 2020 11:35:33 +0000 (12:35 +0100)]
net: cls_api: remove unneeded local variable in tc_dump_chain()
make clang-analyzer on x86_64 defconfig caught my attention with:
net/sched/cls_api.c:2964:3: warning: Value stored to 'parent' is never read
[clang-analyzer-deadcode.DeadStores]
parent = 0;
^
net/sched/cls_api.c:2977:4: warning: Value stored to 'parent' is never read
[clang-analyzer-deadcode.DeadStores]
parent = q->handle;
^
Commit b73bda75ff93 ("net: sched: introduce chain object to uapi")
introduced tc_dump_chain() and this initial implementation already
contained these unneeded dead stores.
Simplify the code to make clang-analyzer happy.
As compilers will detect these unneeded assignments and optimize this
anyway, the resulting binary is identical before and after this change.
Lukas Bulwahn [Wed, 28 Oct 2020 11:53:49 +0000 (12:53 +0100)]
ipv6: mcast: make annotations for ip6_mc_msfget() consistent
Commit ffeee96615ea ("ip*_mc_gsfget(): lift copyout of struct group_filter
into callers") adjusted the type annotations for ip6_mc_msfget() at its
declaration, but missed the type annotations at its definition.
Hence, sparse complains on ./net/ipv6/mcast.c:
mcast.c:550:5: error: symbol 'ip6_mc_msfget' redeclared with different type \
(incompatible argument 3 (different address spaces))
Make ip6_mc_msfget() annotations consistent, which also resolves this
warning from sparse:
Andrew Lunn [Wed, 28 Oct 2020 01:33:44 +0000 (02:33 +0100)]
net: ipv6: calipso: Fix kerneldoc warnings
net/ipv6/calipso.c:1236: warning: Excess function parameter 'reg' description in 'calipso_req_delattr'
net/ipv6/calipso.c:1236: warning: Function parameter or member 'req' not described in 'calipso_req_delattr'
net/ipv6/calipso.c:435: warning: Excess function parameter 'audit_secid' description in 'calipso_doi_remove'
net/ipv6/calipso.c:435: warning: Function parameter or member 'audit_info' not described in 'calipso_doi_remove'
Andrew Lunn [Wed, 28 Oct 2020 01:27:03 +0000 (02:27 +0100)]
net: ipv4: Fix some kerneldoc warnings in TCP Low Priority
net//ipv4/tcp_lp.c:120: warning: Function parameter or member 'sk' not described in 'tcp_lp_cong_avoid'
net//ipv4/tcp_lp.c:135: warning: Function parameter or member 'sk' not described in 'tcp_lp_remote_hz_estimator'
net//ipv4/tcp_lp.c:188: warning: Function parameter or member 'sk' not described in 'tcp_lp_owd_calculator'
net//ipv4/tcp_lp.c:222: warning: Function parameter or member 'rtt' not described in 'tcp_lp_rtt_sample'
net//ipv4/tcp_lp.c:222: warning: Function parameter or member 'sk' not described in 'tcp_lp_rtt_sample'
net//ipv4/tcp_lp.c:265: warning: Function parameter or member 'sk' not described in 'tcp_lp_pkts_acked'
net//ipv4/tcp_lp.c:97: warning: Function parameter or member 'sk' not described in 'tcp_lp_init'
There are still a few kerneldoc warnings after this fix.
Andrew Lunn [Wed, 28 Oct 2020 01:14:12 +0000 (02:14 +0100)]
net: dccp: Fix most of the kerneldoc warnings
net/dccp/ccids/ccid2.c:190: warning: Function parameter or member 'hc' not described in 'ccid2_update_used_window'
net/dccp/ccids/ccid2.c:190: warning: Function parameter or member 'new_wnd' not described in 'ccid2_update_used_window'
net/dccp/ccids/ccid2.c:360: warning: Function parameter or member 'sk' not described in 'ccid2_rtt_estimator'
net/dccp/ccids/ccid3.c:112: warning: Function parameter or member 'sk' not described in 'ccid3_hc_tx_update_x'
net/dccp/ccids/ccid3.c:159: warning: Function parameter or member 'hc' not described in 'ccid3_hc_tx_update_s'
net/dccp/ccids/ccid3.c:268: warning: Function parameter or member 'sk' not described in 'ccid3_hc_tx_send_packet'
net/dccp/ccids/ccid3.c:667: warning: Function parameter or member 'sk' not described in 'ccid3_first_li'
net/dccp/ccids/ccid3.c:85: warning: Function parameter or member 'hc' not described in 'ccid3_update_send_interval'
net/dccp/ccids/lib/loss_interval.c:85: warning: Function parameter or member 'lh' not described in 'tfrc_lh_update_i_mean'
net/dccp/ccids/lib/loss_interval.c:85: warning: Function parameter or member 'skb' not described in 'tfrc_lh_update_i_mean'
net/dccp/ccids/lib/packet_history.c:392: warning: Function parameter or member 'h' not described in 'tfrc_rx_hist_sample_rtt'
net/dccp/ccids/lib/packet_history.c:392: warning: Function parameter or member 'skb' not described in 'tfrc_rx_hist_sample_rtt'
net/dccp/feat.c:1003: warning: Function parameter or member 'dreq' not described in 'dccp_feat_server_ccid_dependencies'
net/dccp/feat.c:1040: warning: Function parameter or member 'array_len' not described in 'dccp_feat_prefer'
net/dccp/feat.c:1040: warning: Function parameter or member 'array' not described in 'dccp_feat_prefer'
net/dccp/feat.c:1040: warning: Function parameter or member 'preferred_value' not described in 'dccp_feat_prefer'
net/dccp/output.c:151: warning: Function parameter or member 'dp' not described in 'dccp_determine_ccmps'
net/dccp/output.c:242: warning: Function parameter or member 'sk' not described in 'dccp_xmit_packet'
net/dccp/output.c:305: warning: Function parameter or member 'sk' not described in 'dccp_flush_write_queue'
net/dccp/output.c:305: warning: Function parameter or member 'time_budget' not described in 'dccp_flush_write_queue'
net/dccp/output.c:378: warning: Function parameter or member 'sk' not described in 'dccp_retransmit_skb'
net/dccp/qpolicy.c:88: warning: Function parameter or member '' not described in 'dccp_qpolicy_operations'
net/dccp/qpolicy.c:88: warning: Function parameter or member '{' not described in 'dccp_qpolicy_operations'
net/dccp/qpolicy.c:88: warning: Function parameter or member 'params' not described in 'dccp_qpolicy_operations'
Andrew Lunn [Wed, 28 Oct 2020 01:09:13 +0000 (02:09 +0100)]
net: dcb: Fix kerneldoc warnings
net//dcb/dcbnl.c:1836: warning: Function parameter or member 'app' not described in 'dcb_getapp'
net//dcb/dcbnl.c:1836: warning: Function parameter or member 'dev' not described in 'dcb_getapp'
net//dcb/dcbnl.c:1858: warning: Function parameter or member 'dev' not described in 'dcb_setapp'
net//dcb/dcbnl.c:1858: warning: Function parameter or member 'new' not described in 'dcb_setapp'
net//dcb/dcbnl.c:1899: warning: Function parameter or member 'app' not described in 'dcb_ieee_getapp_mask'
net//dcb/dcbnl.c:1899: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_mask'
net//dcb/dcbnl.c:1922: warning: Function parameter or member 'dev' not described in 'dcb_ieee_setapp'
net//dcb/dcbnl.c:1922: warning: Function parameter or member 'new' not described in 'dcb_ieee_setapp'
net//dcb/dcbnl.c:1953: warning: Function parameter or member 'del' not described in 'dcb_ieee_delapp'
net//dcb/dcbnl.c:1953: warning: Function parameter or member 'dev' not described in 'dcb_ieee_delapp'
net//dcb/dcbnl.c:1986: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_prio_dscp_mask_map'
net//dcb/dcbnl.c:1986: warning: Function parameter or member 'p_map' not described in 'dcb_ieee_getapp_prio_dscp_mask_map'
net//dcb/dcbnl.c:2016: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_dscp_prio_mask_map'
net//dcb/dcbnl.c:2016: warning: Function parameter or member 'p_map' not described in 'dcb_ieee_getapp_dscp_prio_mask_map'
net//dcb/dcbnl.c:2045: warning: Function parameter or member 'dev' not described in 'dcb_ieee_getapp_default_prio_mask'
For some of these warnings, change to comments to plain comments,
since no attempt is being made to follow kerneldoc syntax.
Andrew Lunn [Wed, 28 Oct 2020 00:56:53 +0000 (01:56 +0100)]
net: nfc: Fix kerneldoc warnings
net//nfc/core.c:1046: warning: Function parameter or member 'tx_headroom' not described in 'nfc_allocate_device'
net//nfc/core.c:1046: warning: Function parameter or member 'tx_tailroom' not described in 'nfc_allocate_device'
net//nfc/core.c:198: warning: Excess function parameter 'protocols' description in 'nfc_start_poll'
net//nfc/core.c:198: warning: Function parameter or member 'im_protocols' not described in 'nfc_start_poll'
net//nfc/core.c:198: warning: Function parameter or member 'tm_protocols' not described in 'nfc_start_poll'
net//nfc/core.c:441: warning: Function parameter or member 'mode' not described in 'nfc_deactivate_target'
net//nfc/core.c:711: warning: Function parameter or member 'dev' not described in 'nfc_alloc_send_skb'
net//nfc/core.c:711: warning: Function parameter or member 'err' not described in 'nfc_alloc_send_skb'
net//nfc/core.c:711: warning: Function parameter or member 'flags' not described in 'nfc_alloc_send_skb'
net//nfc/core.c:711: warning: Function parameter or member 'sk' not described in 'nfc_alloc_send_skb'
net//nfc/digital_core.c:470: warning: Function parameter or member 'im_protocols' not described in 'digital_start_poll'
net//nfc/digital_core.c:470: warning: Function parameter or member 'nfc_dev' not described in 'digital_start_poll'
net//nfc/digital_core.c:470: warning: Function parameter or member 'tm_protocols' not described in 'digital_start_poll'
net//nfc/nci/core.c:1119: warning: Function parameter or member 'tx_headroom' not described in 'nci_allocate_device'
net//nfc/nci/core.c:1119: warning: Function parameter or member 'tx_tailroom' not described in 'nci_allocate_device'
Andrew Lunn [Wed, 28 Oct 2020 00:55:27 +0000 (01:55 +0100)]
net: appletalk: fix kerneldoc warnings
net/appletalk/aarp.c:68: warning: Function parameter or member 'dev' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'expires_at' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'hwaddr' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'last_sent' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'next' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'packet_queue' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'status' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'target_addr' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'xmit_count' not described in 'aarp_entry'
net/appletalk/ddp.c:1422: warning: Function parameter or member 'dev' not described in 'atalk_rcv'
net/appletalk/ddp.c:1422: warning: Function parameter or member 'orig_dev' not described in 'atalk_rcv'
net/appletalk/ddp.c:1422: warning: Function parameter or member 'pt' not described in 'atalk_rcv'
net/appletalk/ddp.c:1422: warning: Function parameter or member 'skb' not described in 'atalk_rcv'
Andrew Lunn [Wed, 28 Oct 2020 00:48:49 +0000 (01:48 +0100)]
net: openvswitch: Fix kerneldoc warnings
net/openvswitch/flow.c:303: warning: Function parameter or member 'key_vh' not described in 'parse_vlan_tag'
net/openvswitch/flow.c:303: warning: Function parameter or member 'skb' not described in 'parse_vlan_tag'
net/openvswitch/flow.c:303: warning: Function parameter or member 'untag_vlan' not described in 'parse_vlan_tag'
net/openvswitch/vport.c:122: warning: Function parameter or member 'parms' not described in 'ovs_vport_alloc'
Andrew Lunn [Wed, 28 Oct 2020 00:46:44 +0000 (01:46 +0100)]
net: llc: Fix kerneldoc warnings
net/llc/llc_conn.c:917: warning: Function parameter or member 'kern' not described in 'llc_sk_alloc'
net/llc/llc_conn.c:917: warning: Function parameter or member 'prot' not described in 'llc_sk_alloc'
Jakub Kicinski [Fri, 30 Oct 2020 18:31:46 +0000 (11:31 -0700)]
Merge branch 'markup-some-printk-like-functions'
Andrew Lunn says:
====================
Markup some printk like functions
W=1 warns of functions which look like printk but don't have
attributes so the compile can check that arguments matches the format
string.
====================
Andrew Lunn [Wed, 28 Oct 2020 00:38:49 +0000 (01:38 +0100)]
net: tipc: Add __printf() markup to fix -Wsuggest-attribute=format
net/tipc/netlink_compat.c: In function ‘tipc_tlv_sprintf’:
net/tipc/netlink_compat.c:137:2: warning: function ‘tipc_tlv_sprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
137 | n = vscnprintf(buf, rem, fmt, args);
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Wed, 28 Oct 2020 00:38:48 +0000 (01:38 +0100)]
net: dccp: Add __printf() markup to fix -Wsuggest-attribute=format
net/dccp/ccid.c: In function ‘ccid_kmem_cache_create’:
net/dccp/ccid.c:85:2: warning: function ‘ccid_kmem_cache_create’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
85 | vsnprintf(slab_name_fmt, CCID_SLAB_NAME_LENGTH, fmt, args);
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
selftests: net: bridge: add tests for IGMPv3
This set adds tests for the bridge's new IGMPv3 support. The tests use
precooked packets which are sent via mausezahn and the resulting state
after each test is checked for proper X,Y sets, (*,G) source list, source
list entry timers, (S,G) existence and flags, packet forwarding and
blocking, exclude group expiration and (*,G) auto-add. The first 3 patches
prepare the existing IGMPv2 tests, then patch 4 adds new helpers which are
used throughout the rest of the v3 tests.
The following new tests are added:
- base case: IGMPv3 report 239.10.10.10 is_include (A)
- include -> allow report
- include -> is_include report
- include -> is_exclude report
- include -> to_exclude report
- exclude -> allow report
- exclude -> is_include report
- exclude -> is_exclude report
- exclude -> to_exclude report
- include -> block report
- exclude -> block report
- exclude timeout (move to include + entry deletion)
- S,G port entry automatic add to a *,G,exclude port
The variable names and set notation are the same as per RFC 3376,
for more information check RFC 3376 sections 4.2.15 and 6.4.1.
MLDv2 tests will be added by a separate patch-set.
====================
selftests: net: bridge: add test for igmpv3 *,g auto-add
When we have *,G ports in exclude mode and a new S,G,port is added
the kernel has to automatically create an S,G entry for each exclude
port to get proper forwarding.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: net: bridge: add test for igmpv3 exc -> to_exclude report
The test checks for the following case:
state report result action
EXCLUDE (X,Y) TO_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y)=Group Timer
Delete (X-A)
Delete (Y-A)
Send Q(G,A-Y)
Group Timer=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: net: bridge: add test for igmpv3 exc -> is_exclude report
The test checks for the following case:
state report result action
EXCLUDE (X,Y) IS_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y)=GMI
Delete (X-A)
Delete (Y-A)
Group Timer=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: net: bridge: add test for igmpv3 inc -> to_exclude report
The test checks for the following case:
state report result action
INCLUDE (A) TO_EX (B) EXCLUDE (A*B,B-A) (B-A)=0
Delete (A-B)
Send Q(G,A*B)
Group Timer=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: net: bridge: add tests for igmpv3 is_include and inc -> allow reports
First we test is_include/include mode then we build on that with allow
effectively achieving:
state report result action
INCLUDE (A) ALLOW (B) INCLUDE (A+B) (B)=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: net: bridge: igmp: add IGMPv3 entries' state helpers
Add helpers which will be used in subsequent tests, they are:
- check_sg_entries: check for proper source list and S,G entry
existence
- check_sg_fwding: check for proper traffic forwarding/blocking
- check_sg_state: check for proper blocked/forwarding entry state
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: net: bridge: igmp: check for specific udp ip protocol
We have to specifically check for udp protocol in addition to the mac
address because in IGMPv3 tests group-specific queries will use the same
mac address.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: stmmac: Enable EEE HW LPI timer with auto SW/HW switching
This patch enables the HW LPI Timer which controls the automatic entry
and exit of the LPI state.
The EEE LPI timer value is configured through ethtool. The driver will
auto select the LPI HW timer if the value in the HW timer supported range.
Else, the driver will fallback to SW timer.
Jakub Kicinski [Fri, 30 Oct 2020 16:07:37 +0000 (09:07 -0700)]
Merge tag 'wimax-staging' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Arnd Bergmann says:
====================
wimax: move to staging
After I sent a fix for what appeared to be a harmless warning in
the wimax user interface code, the conclusion was that the whole
thing has most likely not been used in a very long time, and the
user interface possibly been broken since 789439a22e5c ("wimax: use
genl_register_family_with_ops()").
Using a shared branch between net-next and staging should help
coordinate patches getting submitted against it.
====================
Jon Maloy [Fri, 30 Oct 2020 01:29:38 +0000 (21:29 -0400)]
tipc: add stricter control of reserved service types
TIPC reserves 64 service types for current and future internal use.
Therefore, the bind() function is meant to block regular user sockets
from being bound to these values, while it should let through such
bindings from internal users.
However, since we at the design moment saw no way to distinguish
between regular and internal users the filter function ended up
with allowing all bindings of the reserved types which were really
in use ([0,1]), and block all the rest ([2,63]).
This is risky, since a regular user may bind to the service type
representing the topology server (TIPC_TOP_SRV == 1) or the one used
for indicating neighboring node status (TIPC_CFG_SRV == 0), and wreak
havoc for users of those services, i.e., most users.
The reality is however that TIPC_CFG_SRV never is bound through the
bind() function, since it doesn't represent a regular socket, and
TIPC_TOP_SRV can also be made to bypass the checks in tipc_bind()
by introducing a different entry function, tipc_sk_bind().
It should be noted that although this is a change of the API semantics,
there is no risk we will break any currently working applications by
doing this. Any application trying to bind to the values in question
would be badly broken from the outset, so there is no chance we would
find any such applications in real-world production systems.
v2: Added warning printout when a user is blocked from binding,
as suggested by Jakub Kicinski
Łukasz Stelmach [Tue, 27 Oct 2020 11:43:17 +0000 (12:43 +0100)]
net: mii: Report advertised link capabilities when autonegotiation is off
Unify the set of information returned by mii_ethtool_get_link_ksettings(),
mii_ethtool_gset() and phy_ethtool_ksettings_get(). Make the mii_*()
functions report advertised settings when autonegotiation if disabled.
====================
net: bridge: cfm: Add support for Connectivity Fault Management(CFM)
Connectivity Fault Management (CFM) is defined in 802.1Q
section 12.14.
Connectivity Fault Management (CFM) comprises capabilities for
detecting, verifying, and isolating connectivity failures in Virtual
Bridged Networks. These capabilities can be used in networks
operated by multiple independent organizations, each with restricted
management access to each other’s equipment.
CFM functions are partitioned as follows:
— Path discovery
— Fault detection
— Fault verification and isolation
— Fault notification
— Fault recovery
The primary CFM protocol shims are called Maintenance Points (MPs).
A MP can be either a MEP or a MHF.
The MEP:
-It is the Maintenance association End Point
described in 802.1Q section 19.2.
-It is created on a specific level (1-7) and is assuring
that no CFM frames are passing through this MEP on lower levels.
-It initiates and terminates/validates CFM frames on its level.
-It can only exist on a port that is related to a bridge.
The MHF:
-It is the Maintenance Domain Intermediate Point
(MIP) Half Function (MHF) described in 802.1Q section 19.3.
-It is created on a specific level (1-7).
-It is extracting/injecting certain CFM frame on this level.
-It can only exist on a port that is related to a bridge.
-Currently not supported.
There are defined the following CFM protocol functions:
-Continuity Check
-Loopback. Currently not supported.
-Linktrace. Currently not supported.
This CFM component supports create/delete of MEP instances and
configuration of the different CFM protocols. Also status information
can be fetched and delivered through notification due to defect
status change.
The user interacts with CFM using the 'cfm' user space client
program, the client talks with the kernel using netlink.
Any notification emitted by CFM from the kernel can be monitored in
user space by starting 'cfm_server' program.
Currently this 'cfm' and 'cfm_server' programs are standalone placed
in a cfm repository https://github.com/microchip-ung/cfm but it is
considered to integrate this into 'iproute2'.
v1 -> v2
Added the CFM switchdev interface and also added utilization by
calling the interface from the kernel CFM implementation trying
to offload CFM functionality to HW. This offload (CFM driver) is
currently not implemented.
Corrections based on RCF comments:
-The single CFM kernel implementation Patch is broken up into
three patches.
-Changed the list of MEP instances from list_head to
hlist_head.
-Removed unnecessary RCU list traversing.
-Solved RCU unlocking problem.
-Removed unnecessary comments.
-Added ASSERT_RTNL() where required.
-Shaping up on error messages.
-Correction NETLINK br_fill_ifinfo() to be able to handle
'filter_mask' with multiple flags asserted.
v2 -> v3
-The switchdev definition and utilization has been removed as
there was no switchdev implementation.
-Some compiling issues are fixed as Reported-by:
kernel test robot <lkp@intel.com>.
v3 -> v4
-Fixed potential crash during hlist walk where elements are
removed.
-Giving all commits unique titles.
-NETLINK implementation split into three commits.
-Commit "bridge: cfm: Bridge port remove" is merged with
commit "bridge: cfm: Kernel space implementation of CFM. MEP
create/delete."
v4 -> v5
-Reordered members in struct net_bridge to bring member
frame_type_list to the first cache line.
-Helper functions nla_get_mac() and nla_get_maid() are removed.
-The NLA_POLICY_NESTED() macro is used to initialize the
br_cfm_policy array.
-Fixed reverse xmas tree.
v5 -> v6
-Fixed that the SKB buffer was not freed during error handling return.
-Removed unused struct definition.
-Changed bool to u8 bitfields for space save.
-Utilizing the NETLINK policy validation feature.
v6 -> v7
-Removed check of parameters in br_cfm_mep_config_set() and
br_cfm_cc_peer_mep_add() in first commit of MEP implementation
(Patch 4 out of 10)
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
====================
This is the implementation of Netlink notifications out of CFM.
Notifications are initiated whenever a state change happens in CFM.
IFLA_BRIDGE_CFM:
Points to the CFM information.
IFLA_BRIDGE_CFM_MEP_STATUS_INFO:
This indicate that the MEP instance status are following.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO:
This indicate that the peer MEP status are following.
CFM nested attribute has the following attributes in next level.
IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE:
The MEP instance number of the delivered status.
The type is NLA_U32.
IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN:
The MEP instance received CFM PDU with unexpected Opcode.
The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN:
The MEP instance received CFM PDU with unexpected version.
The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN:
The MEP instance received CCM PDU with MD level lower than
configured level. This frame is discarded.
The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE:
The MEP instance number of the delivered status.
The type is NLA_U32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID:
The added Peer MEP ID of the delivered status.
The type is NLA_U32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT:
The CCM defect status.
The type is NLA_U32 (bool).
True means no CCM frame is received for 3.25 intervals.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI:
The last received CCM PDU RDI.
The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE:
The last received CCM PDU Port Status TLV value field.
The type is NLA_U8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE:
The last received CCM PDU Interface Status TLV value field.
The type is NLA_U8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN:
A CCM frame has been received from Peer MEP.
The type is NLA_U32 (bool).
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN:
A CCM frame with TLV has been received from Peer MEP.
The type is NLA_U32 (bool).
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN:
A CCM frame with unexpected sequence number has been received
from Peer MEP.
The type is NLA_U32 (bool).
When a sequence number is not one higher than previously received
then it is unexpected.
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the implementation of CFM netlink status
get information interface.
Add new nested netlink attributes. These attributes are used by the
user space to get status information.
GETLINK:
Request filter RTEXT_FILTER_CFM_STATUS:
Indicating that CFM status information must be delivered.
IFLA_BRIDGE_CFM:
Points to the CFM information.
IFLA_BRIDGE_CFM_MEP_STATUS_INFO:
This indicate that the MEP instance status are following.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO:
This indicate that the peer MEP status are following.
CFM nested attribute has the following attributes in next level.
GETLINK RTEXT_FILTER_CFM_STATUS:
IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE:
The MEP instance number of the delivered status.
The type is u32.
IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN:
The MEP instance received CFM PDU with unexpected Opcode.
The type is u32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN:
The MEP instance received CFM PDU with unexpected version.
The type is u32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN:
The MEP instance received CCM PDU with MD level lower than
configured level. This frame is discarded.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE:
The MEP instance number of the delivered status.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID:
The added Peer MEP ID of the delivered status.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT:
The CCM defect status.
The type is u32 (bool).
True means no CCM frame is received for 3.25 intervals.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI:
The last received CCM PDU RDI.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE:
The last received CCM PDU Port Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE:
The last received CCM PDU Interface Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN:
A CCM frame has been received from Peer MEP.
The type is u32 (bool).
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN:
A CCM frame with TLV has been received from Peer MEP.
The type is u32 (bool).
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN:
A CCM frame with unexpected sequence number has been received
from Peer MEP.
The type is u32 (bool).
When a sequence number is not one higher than previously received
then it is unexpected.
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the implementation of CFM netlink configuration
get information interface.
Add new nested netlink attributes. These attributes are used by the
user space to get configuration information.
GETLINK:
Request filter RTEXT_FILTER_CFM_CONFIG:
Indicating that CFM configuration information must be delivered.
IFLA_BRIDGE_CFM:
Points to the CFM information.
IFLA_BRIDGE_CFM_MEP_CREATE_INFO:
This indicate that MEP instance create parameters are following.
IFLA_BRIDGE_CFM_MEP_CONFIG_INFO:
This indicate that MEP instance config parameters are following.
IFLA_BRIDGE_CFM_CC_CONFIG_INFO:
This indicate that MEP instance CC functionality
parameters are following.
IFLA_BRIDGE_CFM_CC_RDI_INFO:
This indicate that CC transmitted CCM PDU RDI
parameters are following.
IFLA_BRIDGE_CFM_CC_CCM_TX_INFO:
This indicate that CC transmitted CCM PDU parameters are
following.
IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO:
This indicate that the added peer MEP IDs are following.
CFM nested attribute has the following attributes in next level.
GETLINK RTEXT_FILTER_CFM_CONFIG:
IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
The created MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
The created MEP domain.
The type is u32 (br_cfm_domain).
It must be BR_CFM_PORT.
This means that CFM frames are transmitted and received
directly on the port - untagged. Not in a VLAN.
IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
The created MEP direction.
The type is u32 (br_cfm_mep_direction).
It must be BR_CFM_MEP_DIRECTION_DOWN.
This means that CFM frames are transmitted and received on
the port. Not in the bridge.
IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
The created MEP residence port ifindex.
The type is u32 (ifindex).
IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
The deleted MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
The configured MEP unicast MAC address.
The type is 6*u8 (array).
This is used as SMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
The configured MEP unicast MD level.
The type is u32.
It must be in the range 1-7.
No CFM frames are passing through this MEP on lower levels.
IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
The configured MEP ID.
The type is u32.
It must be in the range 0-0x1FFF.
This MEP ID is inserted in any transmitted CCM frame.
IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
The Continuity Check (CC) functionality is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
The CC expected receive interval of CCM frames.
The type is u32 (br_cfm_ccm_interval).
This is also the transmission interval of CCM frames when enabled.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
The CC expected receive MAID in CCM frames.
The type is CFM_MAID_LENGTH*u8.
This is MAID is also inserted in transmitted CCM frames.
IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_MEPID:
The CC Peer MEP ID added.
The type is u32.
When a Peer MEP ID is added and CC is enabled it is expected to
receive CCM frames from that Peer MEP.
IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_RDI_RDI:
The RDI that is inserted in transmitted CCM PDU.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
The transmitted CCM frame destination MAC address.
The type is 6*u8 (array).
This is used as DMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
The transmitted CCM frame update (increment) of sequence
number is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
The period of time where CCM frame are transmitted.
The type is u32.
The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
must be done before timeout to keep transmission alive.
When period is zero any ongoing CCM frame transmission
will be stopped.
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
The transmitted CCM frame update with Interface Status TLV
is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
The transmitted Interface Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
The transmitted CCM frame update with Port Status TLV is enabled
or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
The transmitted Port Status TLV value field.
The type is u8.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the implementation of CFM netlink configuration
set information interface.
Add new nested netlink attributes. These attributes are used by the
user space to create/delete/configure CFM instances.
SETLINK:
IFLA_BRIDGE_CFM:
Indicate that the following attributes are CFM.
IFLA_BRIDGE_CFM_MEP_CREATE:
This indicate that a MEP instance must be created.
IFLA_BRIDGE_CFM_MEP_DELETE:
This indicate that a MEP instance must be deleted.
IFLA_BRIDGE_CFM_MEP_CONFIG:
This indicate that a MEP instance must be configured.
IFLA_BRIDGE_CFM_CC_CONFIG:
This indicate that a MEP instance Continuity Check (CC)
functionality must be configured.
IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD:
This indicate that a CC Peer MEP must be added.
IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE:
This indicate that a CC Peer MEP must be removed.
IFLA_BRIDGE_CFM_CC_CCM_TX:
This indicate that the CC transmitted CCM PDU must be configured.
IFLA_BRIDGE_CFM_CC_RDI:
This indicate that the CC transmitted CCM PDU RDI must be
configured.
CFM nested attribute has the following attributes in next level.
SETLINK RTEXT_FILTER_CFM_CONFIG:
IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
The created MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
The created MEP domain.
The type is u32 (br_cfm_domain).
It must be BR_CFM_PORT.
This means that CFM frames are transmitted and received
directly on the port - untagged. Not in a VLAN.
IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
The created MEP direction.
The type is u32 (br_cfm_mep_direction).
It must be BR_CFM_MEP_DIRECTION_DOWN.
This means that CFM frames are transmitted and received on
the port. Not in the bridge.
IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
The created MEP residence port ifindex.
The type is u32 (ifindex).
IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
The deleted MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
The configured MEP unicast MAC address.
The type is 6*u8 (array).
This is used as SMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
The configured MEP unicast MD level.
The type is u32.
It must be in the range 1-7.
No CFM frames are passing through this MEP on lower levels.
IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
The configured MEP ID.
The type is u32.
It must be in the range 0-0x1FFF.
This MEP ID is inserted in any transmitted CCM frame.
IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
The Continuity Check (CC) functionality is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
The CC expected receive interval of CCM frames.
The type is u32 (br_cfm_ccm_interval).
This is also the transmission interval of CCM frames when enabled.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
The CC expected receive MAID in CCM frames.
The type is CFM_MAID_LENGTH*u8.
This is MAID is also inserted in transmitted CCM frames.
IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_MEPID:
The CC Peer MEP ID added.
The type is u32.
When a Peer MEP ID is added and CC is enabled it is expected to
receive CCM frames from that Peer MEP.
IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_RDI_RDI:
The RDI that is inserted in transmitted CCM PDU.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
The transmitted CCM frame destination MAC address.
The type is 6*u8 (array).
This is used as DMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
The transmitted CCM frame update (increment) of sequence
number is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
The period of time where CCM frame are transmitted.
The type is u32.
The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
must be done before timeout to keep transmission alive.
When period is zero any ongoing CCM frame transmission
will be stopped.
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
The transmitted CCM frame update with Interface Status TLV
is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
The transmitted Interface Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
The transmitted CCM frame update with Port Status TLV is enabled
or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
The transmitted Port Status TLV value field.
The type is u8.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bridge: cfm: Kernel space implementation of CFM. CCM frame RX added.
This is the third commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.
Functionality is extended with CCM frame reception.
The MEP instance now contains CCM based status information.
Most important is the CCM defect status indicating if correct
CCM frames are received with the expected interval.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bridge: cfm: Kernel space implementation of CFM. CCM frame TX added.
This is the second commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.
Functionality is extended with CCM frame transmission.
Interface is extended with these functions:
br_cfm_cc_rdi_set()
br_cfm_cc_ccm_tx()
br_cfm_cc_config_set()
A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
The Continuity Check parameters can be configured to be used when
transmitting CCM.
A MEP can be configured to start or stop transmission of CCM frames by
br_cfm_cc_ccm_tx()
The CCM will be transmitted for a selected period in seconds.
Must call this function before timeout to keep transmission alive.
A MEP transmitting CCM can be configured with inserted RDI in PDU by
br_cfm_cc_rdi_set()
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bridge: cfm: Kernel space implementation of CFM. MEP create/delete.
This is the first commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.
It contains MEP instance create, delete and configuration.
Connectivity Fault Management (CFM) comprises capabilities for
detecting, verifying, and isolating connectivity failures in
Virtual Bridged Networks. These capabilities can be used in
networks operated by multiple independent organizations, each
with restricted management access to each others equipment.
CFM functions are partitioned as follows:
- Path discovery
- Fault detection
- Fault verification and isolation
- Fault notification
- Fault recovery
Interface consists of these functions:
br_cfm_mep_create()
br_cfm_mep_delete()
br_cfm_mep_config_set()
br_cfm_cc_config_set()
br_cfm_cc_peer_mep_add()
br_cfm_cc_peer_mep_remove()
A MEP instance is created by br_cfm_mep_create()
-It is the Maintenance association End Point
described in 802.1Q section 19.2.
-It is created on a specific level (1-7) and is assuring
that no CFM frames are passing through this MEP on lower levels.
-It initiates and validates CFM frames on its level.
-It can only exist on a port that is related to a bridge.
-Attributes given cannot be changed until the instance is
deleted.
A MEP instance can be deleted by br_cfm_mep_delete().
A created MEP instance has attributes that can be
configured by br_cfm_mep_config_set().
A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
The Continuity Check Receiver state machine can be
enabled and disabled.
According to 802.1Q section 19.2.8
A MEP can have Peer MEPs added and removed by
br_cfm_cc_peer_mep_add() and br_cfm_cc_peer_mep_remove()
The Continuity Check feature can maintain connectivity
status on each added Peer MEP.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch extends the processing of frames in the bridge. Currently MRP
frames needs special processing and the current implementation doesn't
allow a nice way to process different frame types. Therefore try to
improve this by adding a list that contains frame types that need
special processing. This list is iterated for each input frame and if
there is a match based on frame type then these functions will be called
and decide what to do with the frame. It can process the frame then the
bridge doesn't need to do anything or don't process so then the bridge
will do normal forwarding.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Colin Ian King [Tue, 27 Oct 2020 09:09:42 +0000 (09:09 +0000)]
vsock: fix the error return when an invalid ioctl command is used
Currently when an invalid ioctl command is used the error return
is -EINVAL. Fix this by returning the correct error -ENOIOCTLCMD.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Colin Ian King [Tue, 27 Oct 2020 09:09:41 +0000 (09:09 +0000)]
vsock: remove ratelimit unknown ioctl message
When exercising the kernel with stress-ng with some ioctl tests the
"Unknown ioctl" error message is spamming the kernel log at a high
rate. Remove this message.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 29 Oct 2020 20:02:52 +0000 (13:02 -0700)]
Merge tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fix from Gustavo A. R. Silva:
"This fixes a ton of fall-through warnings when building with Clang
12.0.0 and -Wimplicit-fallthrough"
* tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
include: jhash/signal: Fix fall-through warnings for Clang
Linus Torvalds [Thu, 29 Oct 2020 19:55:02 +0000 (12:55 -0700)]
Merge tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release regressions:
- r8169: fix forced threading conflicting with other shared
interrupts; we tried to fix the use of raise_softirq_irqoff from an
IRQ handler on RT by forcing hard irqs, but this driver shares
legacy PCI IRQs so drop the _irqoff() instead
- tipc: fix memory leak caused by a recent syzbot report fix to
tipc_buf_append()
Current release - bugs in new features:
- devlink: Unlock on error in dumpit() and fix some error codes
- net/smc: fix null pointer dereference in smc_listen_decline()
Previous release - regressions:
- tcp: Prevent low rmem stalls with SO_RCVLOWAT.
- net: protect tcf_block_unbind with block lock
- ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering
to only send legal frames to the hypervisor was too strict
- net: hns3: Clear the CMDQ registers before unmapping BAR region;
incorrect cleanup order was leading to a crash
- bnxt_en - handful of fixes to fixes:
- Send HWRM_FUNC_RESET fw command unconditionally, even if there
are PCIe errors being reported
- Check abort error state in bnxt_open_nic().
- Invoke cancel_delayed_work_sync() for PFs also.
- Fix regression in workqueue cleanup logic in bnxt_remove_one().
- mlxsw: Only advertise link modes supported by both driver and
device, after removal of 56G support from the driver 56G was not
cleared from advertised modes
- net/smc: fix suppressed return code
Previous release - always broken:
- netem: fix zero division in tabledist, caused by integer overflow
- bnxt_en: Re-write PCI BARs after PCI fatal error.
- cxgb4: set up filter action after rewrites
- net: ipa: command payloads already mapped
Misc:
- s390/ism: fix incorrect system EID, it's okay to change since it
was added in current release
- vsock: use ns_capable_noaudit() on socket create to suppress false
positive audit messages"
* tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
r8169: fix issue with forced threading in combination with shared interrupts
netem: fix zero division in tabledist
ibmvnic: fix ibmvnic_set_mac
mptcp: add missing memory scheduling in the rx path
tipc: fix memory leak caused by tipc_buf_append()
gtp: fix an use-before-init in gtp_newlink()
net: protect tcf_block_unbind with block lock
ibmveth: Fix use of ibmveth in a bridge.
net/sched: act_mpls: Add softdep on mpls_gso.ko
ravb: Fix bit fields checking in ravb_hwtstamp_get()
devlink: Unlock on error in dumpit()
devlink: Fix some error codes
chelsio/chtls: fix memory leaks in CPL handlers
chelsio/chtls: fix deadlock issue
net: hns3: Clear the CMDQ registers before unmapping BAR region
bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.
bnxt_en: Check abort error state in bnxt_open_nic().
bnxt_en: Re-write PCI BARs after PCI fatal error.
bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.
bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().
...
Linus Torvalds [Thu, 29 Oct 2020 18:50:59 +0000 (11:50 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"The good news is people are testing rc1 in the RDMA world - the bad
news is testing of the for-next area is not as good as I had hoped, as
we really should have caught at least the rdma_connect_locked() issue
before now.
Notable merge window regressions that didn't get caught/fixed in time
for rc1:
- Fix in kernel users of rxe, they were broken by the rapid fix to
undo the uABI breakage in rxe from another patch
- EFA userspace needs to read the GID table but was broken with the
new GID table logic
- Fix user triggerable deadlock in mlx5 using devlink reload
- Fix deadlock in several ULPs using rdma_connect from the CM handler
callbacks
- Memory leak in qedr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/qedr: Fix memory leak in iWARP CM
RDMA: Add rdma_connect_locked()
RDMA/uverbs: Fix false error in query gid IOCTL
RDMA/mlx5: Fix devlink deadlock on net namespace deletion
RDMA/rxe: Fix small problem in network_type patch
Heiner Kallweit [Thu, 29 Oct 2020 09:18:53 +0000 (10:18 +0100)]
r8169: fix issue with forced threading in combination with shared interrupts
As reported by Serge flag IRQF_NO_THREAD causes an error if the
interrupt is actually shared and the other driver(s) don't have this
flag set. This situation can occur if a PCI(e) legacy interrupt is
used in combination with forced threading.
There's no good way to deal with this properly, therefore we have to
remove flag IRQF_NO_THREAD. For fixing the original forced threading
issue switch to napi_schedule().
Aleksandr Nogikh [Wed, 28 Oct 2020 17:07:31 +0000 (17:07 +0000)]
netem: fix zero division in tabledist
Currently it is possible to craft a special netlink RTM_NEWQDISC
command that can result in jitter being equal to 0x80000000. It is
enough to set the 32 bit jitter to 0x02000000 (it will later be
multiplied by 2^6) or just set the 64 bit jitter via
TCA_NETEM_JITTER64. This causes an overflow during the generation of
uniformly distributed numbers in tabledist(), which in turn leads to
division by zero (sigma != 0, but sigma * 2 is 0).
The related fragment of code needs 32-bit division - see commit bed8e2f ("netem: remove unnecessary 64 bit modulus"), so switching to
64 bit is not an option.
Fix the issue by keeping the value of jitter within the range that can
be adequately handled by tabledist() - [0;INT_MAX]. As negative std
deviation makes no sense, take the absolute value of the passed value
and cap it at INT_MAX. Inside tabledist(), switch to unsigned 32 bit
arithmetic in order to prevent overflows.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Aleksandr Nogikh <nogikh@google.com> Reported-by: syzbot+ec762a6342ad0d3c0d8f@syzkaller.appspotmail.com Acked-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20201028170731.1383332-1-aleksandrnogikh@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lijun Pan [Tue, 27 Oct 2020 22:04:56 +0000 (17:04 -0500)]
ibmvnic: fix ibmvnic_set_mac
Jakub Kicinski brought up a concern in ibmvnic_set_mac().
ibmvnic_set_mac() does this:
ether_addr_copy(adapter->mac_addr, addr->sa_data);
if (adapter->state != VNIC_PROBED)
rc = __ibmvnic_set_mac(netdev, addr->sa_data);
So if state == VNIC_PROBED, the user can assign an invalid address to
adapter->mac_addr, and ibmvnic_set_mac() will still return 0.
The fix is to validate ethernet address at the beginning of
ibmvnic_set_mac(), and move the ether_addr_copy to
the case of "adapter->state != VNIC_PROBED".
Arnd Bergmann [Tue, 27 Oct 2020 20:12:12 +0000 (21:12 +0100)]
wimax: move out to staging
There are no known users of this driver as of October 2020, and it will
be removed unless someone turns out to still need it in future releases.
According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there
have been many public wimax networks, but it appears that many of these
have migrated to LTE or discontinued their service altogether.
As most PCs and phones lack WiMAX hardware support, the remaining
networks tend to use standalone routers. These almost certainly
run Linux, but not a modern kernel or the mainline wimax driver stack.
NetworkManager appears to have dropped userspace support in 2015
https://bugzilla.gnome.org/show_bug.cgi?id=747846, the
www.linuxwimax.org
site had already shut down earlier.
WiMax is apparently still being deployed on airport campus networks
("AeroMACS"), but in a frequency band that was not supported by the old
Intel 2400m (used in Sandy Bridge laptops and earlier), which is the
only driver using the kernel's wimax stack.
Move all files into drivers/staging/wimax, including the uapi header
files and documentation, to make it easier to remove it when it gets
to that. Only minimal changes are made to the source files, in order
to make it possible to port patches across the move.
Also remove the MAINTAINERS entry that refers to a broken mailing
list and website.
Arnd Bergmann [Sun, 18 Oct 2020 18:00:13 +0000 (20:00 +0200)]
wimax: fix duplicate initializer warning
gcc -Wextra points out multiple fields that use the same index '1'
in the wimax_gnl_policy definition:
net/wimax/stack.c:393:29: warning: initialized field overwritten [-Woverride-init]
net/wimax/stack.c:397:28: warning: initialized field overwritten [-Woverride-init]
net/wimax/stack.c:398:26: warning: initialized field overwritten [-Woverride-init]
This seems to work since all four use the same NLA_U32 value, but it
still appears to be wrong. In addition, there is no intializer for
WIMAX_GNL_MSG_PIPE_NAME, which uses the same index '2' as
WIMAX_GNL_RFKILL_STATE.
Johannes already changed this twice to improve it, but I don't think
there is a good solution, so try to work around it by using a
numeric index and adding comments.
Fixes: 3a446d81905e ("genetlink: make policy common to family") Fixes: 789439a22e5c ("wimax: use genl_register_family_with_ops()") Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
include: jhash/signal: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, explicitly
add break statements instead of letting the code fall through to the
next case.
This patch adds four break statements that, together, fix almost 40,000
warnings when building Linux 5.10-rc1 with Clang 12.0.0 and this[1] change
reverted. Notice that in order to enable -Wimplicit-fallthrough for Clang,
such change[1] is meant to be reverted at some point. So, this patch helps
to move in that direction.
Something important to mention is that there is currently a discrepancy
between GCC and Clang when dealing with switch fall-through to empty case
statements or to cases that only contain a break/continue/return
statement[2][3][4].
Now that the -Wimplicit-fallthrough option has been globally enabled[5],
any compiler should really warn on missing either a fallthrough annotation
or any of the other case-terminating statements (break/continue/return/
goto) when falling through to the next case statement. Making exceptions
to this introduces variation in case handling which may continue to lead
to bugs, misunderstandings, and a general lack of robustness. The point
of enabling options like -Wimplicit-fallthrough is to prevent human error
and aid developers in spotting bugs before their code is even built/
submitted/committed, therefore eliminating classes of bugs. So, in order
to really accomplish this, we should, and can, move in the direction of
addressing any error-prone scenarios and get rid of the unintentional
fallthrough bug-class in the kernel, entirely, even if there is some minor
redundancy. Better to have explicit case-ending statements than continue to
have exceptions where one must guess as to the right result. The compiler
will eliminate any actual redundancy.
[1] commit 84bd867e54bef ("kbuild: Do not enable -Wimplicit-fallthrough for clang for now")
[2] https://github.com/ClangBuiltLinux/linux/issues/636
[3] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91432
[4] https://godbolt.org/z/xgkvIh
[5] commit 9efd3326fae8 ("Makefile: Globally enable fall-through warning")
Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Linus Torvalds [Thu, 29 Oct 2020 17:13:09 +0000 (10:13 -0700)]
Merge tag 'afs-fixes-20201029' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
- Fix copy_file_range() to an afs file now returning EINVAL if the
splice_write file op isn't supplied.
- Fix a deref-before-check in afs_unuse_cell().
- Fix a use-after-free in afs_xattr_get_acl().
- Fix afs to not try to clear PG_writeback when laundering a page.
- Fix afs to take a ref on a page that it sets PG_private on and to
drop that ref when clearing PG_private. This is done through recently
added helpers.
- Fix a page leak if write_begin() fails.
- Fix afs_write_begin() to not alter the dirty region info stored in
page->private, but rather do this in afs_write_end() instead when we
know what we actually changed.
- Fix afs_invalidatepage() to alter the dirty region info on a page
when partial page invalidation occurs so that we don't inadvertantly
include a span of zeros that will get written back if a page gets
laundered due to a remote 3rd-party induced invalidation.
We mustn't, however, reduce the dirty region if the page has been
seen to be mapped (ie. we got called through the page_mkwrite vector)
as the page might still be mapped and we might lose data if the file
is extended again.
- Fix the dirty region info to have a lower resolution if the size of
the page is too large for this to be encoded (e.g. powerpc32 with 64K
pages).
Note that this might not be the ideal way to handle this, since it
may allow some leakage of undirtied zero bytes to the server's copy
in the case of a 3rd-party conflict.
To aid the last two fixes, two additional changes:
- Wrap the manipulations of the dirty region info stored in
page->private into helper functions.
- Alter the encoding of the dirty region so that the region bounds can
be stored with one fewer bit, making a bit available for the
indication of mappedness.
* tag 'afs-fixes-20201029' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix dirty-region encoding on ppc32 with 64K pages
afs: Fix afs_invalidatepage to adjust the dirty region
afs: Alter dirty range encoding in page->private
afs: Wrap page->private manipulations in inline functions
afs: Fix where page->private is set during write
afs: Fix page leak on afs_write_begin() failure
afs: Fix to take ref on page when PG_private is set
afs: Fix afs_launder_page to not clear PG_writeback
afs: Fix a use after free in afs_xattr_get_acl()
afs: Fix tracing deref-before-check
afs: Fix copy_file_range()
Tung Nguyen [Tue, 27 Oct 2020 03:24:03 +0000 (10:24 +0700)]
tipc: fix memory leak caused by tipc_buf_append()
Commit 69abd53036dd ("tipc: fix the skb_unshare() in tipc_buf_append()")
replaced skb_unshare() with skb_copy() to not reduce the data reference
counter of the original skb intentionally. This is not the correct
way to handle the cloned skb because it causes memory leak in 2
following cases:
1/ Sending multicast messages via broadcast link
The original skb list is cloned to the local skb list for local
destination. After that, the data reference counter of each skb
in the original list has the value of 2. This causes each skb not
to be freed after receiving ACK:
tipc_link_advance_transmq()
{
...
/* release skb */
__skb_unlink(skb, &l->transmq);
kfree_skb(skb); <-- memory exists after being freed
}
2/ Sending multicast messages via replicast link
Similar to the above case, each skb cannot be freed after purging
the skb list:
tipc_mcast_xmit()
{
...
__skb_queue_purge(pkts); <-- memory exists after being freed
}
This commit fixes this issue by using skb_unshare() instead. Besides,
to avoid use-after-free error reported by KASAN, the pointer to the
fragment is set to NULL before calling skb_unshare() to make sure that
the original skb is not freed after freeing the fragment 2 times in
case skb_unshare() returns NULL.
Fixes: 69abd53036dd ("tipc: fix the skb_unshare() in tipc_buf_append()") Acked-by: Jon Maloy <jmaloy@redhat.com> Reported-by: Thang Hoang Ngo <thang.h.ngo@dektech.com.au> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Reviewed-by: Xin Long <lucien.xin@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20201027032403.1823-1-tung.q.nguyen@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 29 Oct 2020 16:36:11 +0000 (09:36 -0700)]
Merge tag 'ext4_for_linus_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes for the new ext4 fast commit feature, plus a fix for the
'data=journal' bug fix.
Also use the generic casefolding support which has now landed in
fs/libfs.c for 5.10"
* tag 'ext4_for_linus_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: indicate that fast_commit is available via /sys/fs/ext4/feature/...
ext4: use generic casefolding support
ext4: do not use extent after put_bh
ext4: use IS_ERR() for error checking of path
ext4: fix mmap write protection for data=journal mode
jbd2: fix a kernel-doc markup
ext4: use s_mount_flags instead of s_mount_state for fast commit state
ext4: make num of fast commit blocks configurable
ext4: properly check for dirty state in ext4_inode_datasync_dirty()
ext4: fix double locking in ext4_fc_commit_dentry_updates()
David Howells [Wed, 28 Oct 2020 12:08:39 +0000 (12:08 +0000)]
afs: Fix dirty-region encoding on ppc32 with 64K pages
The dirty region bounds stored in page->private on an afs page are 15 bits
on a 32-bit box and can, at most, represent a range of up to 32K within a
32K page with a resolution of 1 byte. This is a problem for powerpc32 with
64K pages enabled.
Further, transparent huge pages may get up to 2M, which will be a problem
for the afs filesystem on all 32-bit arches in the future.
Fix this by decreasing the resolution. For the moment, a 64K page will
have a resolution determined from PAGE_SIZE. In the future, the page will
need to be passed in to the helper functions so that the page size can be
assessed and the resolution determined dynamically.
Note that this might not be the ideal way to handle this, since it may
allow some leakage of undirtied zero bytes to the server's copy in the case
of a 3rd-party conflict. Fixing that would require a separately allocated
record and is a more complicated fix.
Fixes: 19554d2d2903 ("afs: Get rid of the afs_writeback record") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
David Howells [Thu, 22 Oct 2020 13:08:23 +0000 (14:08 +0100)]
afs: Fix afs_invalidatepage to adjust the dirty region
Fix afs_invalidatepage() to adjust the dirty region recorded in
page->private when truncating a page. If the dirty region is entirely
removed, then the private data is cleared and the page dirty state is
cleared.
Without this, if the page is truncated and then expanded again by truncate,
zeros from the expanded, but no-longer dirty region may get written back to
the server if the page gets laundered due to a conflicting 3rd-party write.
It mustn't, however, shorten the dirty region of the page if that page is
still mmapped and has been marked dirty by afs_page_mkwrite(), so a flag is
stored in page->private to record this.
Fixes: 19554d2d2903 ("afs: Get rid of the afs_writeback record") Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Mon, 26 Oct 2020 13:57:44 +0000 (13:57 +0000)]
afs: Alter dirty range encoding in page->private
Currently, page->private on an afs page is used to store the range of
dirtied data within the page, where the range includes the lower bound, but
excludes the upper bound (e.g. 0-1 is a range covering a single byte).
This, however, requires a superfluous bit for the last-byte bound so that
on a 4KiB page, it can say 0-4096 to indicate the whole page, the idea
being that having both numbers the same would indicate an empty range.
This is unnecessary as the PG_private bit is clear if it's an empty range
(as is PG_dirty).
Alter the way the dirty range is encoded in page->private such that the
upper bound is reduced by 1 (e.g. 0-0 is then specified the same single
byte range mentioned above).
Applying this to both bounds frees up two bits, one of which can be used in
a future commit.
This allows the afs filesystem to be compiled on ppc32 with 64K pages;
without this, the following warnings are seen:
../fs/afs/internal.h: In function 'afs_page_dirty_to':
../fs/afs/internal.h:881:15: warning: right shift count >= width of type [-Wshift-count-overflow]
881 | return (priv >> __AFS_PAGE_PRIV_SHIFT) & __AFS_PAGE_PRIV_MASK;
| ^~
../fs/afs/internal.h: In function 'afs_page_dirty':
../fs/afs/internal.h:886:28: warning: left shift count >= width of type [-Wshift-count-overflow]
886 | return ((unsigned long)to << __AFS_PAGE_PRIV_SHIFT) | from;
| ^~
Fixes: 19554d2d2903 ("afs: Get rid of the afs_writeback record") Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Mon, 26 Oct 2020 13:22:47 +0000 (13:22 +0000)]
afs: Wrap page->private manipulations in inline functions
The afs filesystem uses page->private to store the dirty range within a
page such that in the event of a conflicting 3rd-party write to the server,
we write back just the bits that got changed locally.
However, there are a couple of problems with this:
(1) I need a bit to note if the page might be mapped so that partial
invalidation doesn't shrink the range.
(2) There aren't necessarily sufficient bits to store the entire range of
data altered (say it's a 32-bit system with 64KiB pages or transparent
huge pages are in use).
So wrap the accesses in inline functions so that future commits can change
how this works.
Also move them out of the tracing header into the in-directory header.
There's not really any need for them to be in the tracing header.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Mon, 26 Oct 2020 14:05:33 +0000 (14:05 +0000)]
afs: Fix where page->private is set during write
In afs, page->private is set to indicate the dirty region of a page. This
is done in afs_write_begin(), but that can't take account of whether the
copy into the page actually worked.
Fix this by moving the change of page->private into afs_write_end().
Fixes: 19554d2d2903 ("afs: Get rid of the afs_writeback record") Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Wed, 21 Oct 2020 12:22:19 +0000 (13:22 +0100)]
afs: Fix to take ref on page when PG_private is set
Fix afs to take a ref on a page when it sets PG_private on it and to drop
the ref when removing the flag.
Note that in afs_write_begin(), a lot of the time, PG_private is already
set on a page to which we're going to add some data. In such a case, we
leave the bit set and mustn't increment the page count.
As suggested by Matthew Wilcox, use attach/detach_page_private() where
possible.
Fixes: 6f37bcf4b639 ("AFS: implement basic file write support") Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Linus Torvalds [Wed, 28 Oct 2020 19:05:14 +0000 (12:05 -0700)]
Merge tag 'trace-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix synthetic event "strcat" overrun
New synthetic event code used strcat() and miscalculated the ending,
causing the concatenation to write beyond the allocated memory.
Instead of using strncat(), the code is switched over to seq_buf which
has all the mechanisms in place to protect against writing more than
what is allocated, and cleans up the code a bit"
* tag 'trace-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing, synthetic events: Replace buggy strcat() with seq_buf operations
Daniel Rosenberg [Wed, 28 Oct 2020 05:08:20 +0000 (05:08 +0000)]
ext4: use generic casefolding support
This switches ext4 over to the generic support provided in libfs.
Since casefolded dentries behave the same in ext4 and f2fs, we decrease
the maintenance burden by unifying them, and any optimizations will
immediately apply to both.
yangerkun [Wed, 28 Oct 2020 05:56:17 +0000 (13:56 +0800)]
ext4: do not use extent after put_bh
ext4_ext_search_right() will read more extent blocks and call put_bh
after we get the information we need. However, ret_ex will break this
and may cause use-after-free once pagecache has been freed. Fix it by
copying the extent structure if needed.
Jan Kara [Tue, 27 Oct 2020 13:27:51 +0000 (14:27 +0100)]
ext4: fix mmap write protection for data=journal mode
Commit 0779ed61efad "ext4: data=journal: write-protect pages on
j_submit_inode_data_buffers()") added calls ext4_jbd2_inode_add_write()
to track inode ranges whose mappings need to get write-protected during
transaction commits. However the added calls use wrong start of a range
(0 instead of page offset) and so write protection is not necessarily
effective. Use correct range start to fix the problem.
Fixes: 0779ed61efad ("ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201027132751.29858-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch reserves a field in the jbd2 superblock for number of fast
commit blocks. When this value is non-zero, Ext4 uses this field to
set the number of fast commit blocks.
Andrea Righi [Tue, 27 Oct 2020 04:49:13 +0000 (21:49 -0700)]
ext4: properly check for dirty state in ext4_inode_datasync_dirty()
ext4_inode_datasync_dirty() needs to return 'true' if the inode is
dirty, 'false' otherwise, but the logic seems to be incorrectly changed
by commit 95d2b4933dd9 ("ext4: main fast-commit commit path").
This introduces a problem with swap files that are always failing to be
activated, showing this error in dmesg:
Jason Gunthorpe [Mon, 26 Oct 2020 14:25:49 +0000 (11:25 -0300)]
RDMA: Add rdma_connect_locked()
There are two flows for handling RDMA_CM_EVENT_ROUTE_RESOLVED, either the
handler triggers a completion and another thread does rdma_connect() or
the handler directly calls rdma_connect().
In all cases rdma_connect() needs to hold the handler_mutex, but when
handler's are invoked this is already held by the core code. This causes
ULPs using the 2nd method to deadlock.
Provide a rdma_connect_locked() and have all ULPs call it from their
handlers.
Link: https://lore.kernel.org/r/0-v2-53c22d5c1405+33-rdma_connect_locking_jgg@nvidia.com Reported-and-tested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Fixes: e9d48fde9bd9 ("RDMA/cma: Fix locking for the RDMA_CM_CONNECT state") Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Robert Hancock [Mon, 26 Oct 2020 17:58:02 +0000 (11:58 -0600)]
net: phylink: disable BMCR_ISOLATE in phylink_mii_c22_pcs_config
The Xilinx PCS/PMA PHY requires that BMCR_ISOLATE be disabled for proper
operation in 1000BaseX mode. It should be safe to ensure this bit is
disabled in phylink_mii_c22_pcs_config in all cases.
Leon Romanovsky [Mon, 26 Oct 2020 12:33:27 +0000 (14:33 +0200)]
net: protect tcf_block_unbind with block lock
The tcf_block_unbind() expects that the caller will take block->cb_lock
before calling it, however the code took RTNL lock and dropped cb_lock
instead. This causes to the following kernel panic.
The check for src mac address in ibmveth_is_packet_unsupported is wrong.
Commit 7dfc1cc642fe wanted to shut down messages for loopback packets,
but now suppresses bridged frames, which are accepted by the hypervisor
otherwise bridging won't work at all.
Fixes: 7dfc1cc642fe ("ibmveth: Detect unsupported packets before sending to the hypervisor") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://lore.kernel.org/r/20201026104221.26570-1-msuchanek@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Gabbasov [Mon, 26 Oct 2020 10:21:30 +0000 (05:21 -0500)]
ravb: Fix bit fields checking in ravb_hwtstamp_get()
In the function ravb_hwtstamp_get() in ravb_main.c with the existing
values for RAVB_RXTSTAMP_TYPE_V2_L2_EVENT (0x2) and RAVB_RXTSTAMP_TYPE_ALL
(0x6)
if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_V2_L2_EVENT)
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
else if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_ALL)
config.rx_filter = HWTSTAMP_FILTER_ALL;
if the test on RAVB_RXTSTAMP_TYPE_ALL should be true,
it will never be reached.
This issue can be verified with 'hwtstamp_config' testing program
(tools/testing/selftests/net/hwtstamp_config.c). Setting filter type
to ALL and subsequent retrieving it gives incorrect value:
$ hwtstamp_config eth0 OFF ALL
flags = 0
tx_type = OFF
rx_filter = ALL
$ hwtstamp_config eth0
flags = 0
tx_type = OFF
rx_filter = PTP_V2_L2_EVENT
Correct this by converting if-else's to switch.
Fixes: bfafa9ee6042 ("Renesas Ethernet AVB driver proper") Reported-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Link: https://lore.kernel.org/r/20201026102130.29368-1-andrew_gabbasov@mentor.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Mon, 26 Oct 2020 08:01:27 +0000 (11:01 +0300)]
devlink: Unlock on error in dumpit()
This needs to unlock before returning.
Fixes: af97fc7e2a5d ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201026080127.GB1628785@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / kernel.git / log