Ira Weiny [Thu, 30 Apr 2020 14:41:37 +0000 (07:41 -0700)]
fs: Introduce DCACHE_DONTCACHE
DCACHE_DONTCACHE indicates a dentry should not be cached on final
dput().
Also add a helper function to mark DCACHE_DONTCACHE on all dentries
pointing to a specific inode when that inode is being set I_DONTCACHE.
This facilitates dropping dentry references to inodes sooner which
require eviction to swap S_DAX mode.
Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS has an advisory flag (XFS_IDONTCACHE) to prevent caching of the
inode if no other additional references are taken. We lift this flag to
the VFS layer and change the behavior slightly by allowing the flag to
remain even if multiple references are taken.
This will expedite the eviction of inodes to change S_DAX.
Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Ira Weiny [Thu, 30 Apr 2020 14:41:34 +0000 (07:41 -0700)]
Documentation/dax: Update Usage section
Update the Usage section to reflect the new individual dax selection
functionality.
Signed-off-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Ira Weiny [Thu, 30 Apr 2020 14:41:34 +0000 (07:41 -0700)]
fs/stat: Define DAX statx attribute
In order for users to determine if a file is currently operating in DAX
state (effective DAX). Define a statx attribute value and set that
attribute if the effective DAX flag is set.
To go along with this we propose the following addition to the statx man
page:
STATX_ATTR_DAX
The file is in the DAX (cpu direct access) state. DAX state
attempts to minimize software cache effects for both I/O and
memory mappings of this file. It requires a file system which
has been configured to support DAX.
DAX generally assumes all accesses are via cpu load / store
instructions which can minimize overhead for small accesses, but
may adversely affect cpu utilization for large transfers.
File I/O is done directly to/from user-space buffers and memory
mapped I/O may be performed with direct memory mappings that
bypass kernel page cache.
While the DAX property tends to result in data being transferred
synchronously, it does not give the same guarantees of O_SYNC
where data and the necessary metadata are transferred together.
A DAX file may support being mapped with the MAP_SYNC flag,
which enables a program to use CPU cache flush instructions to
persist CPU store operations without an explicit fsync(2). See
mmap(2) for more information.
Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Ira Weiny [Thu, 30 Apr 2020 14:41:33 +0000 (07:41 -0700)]
fs: Remove unneeded IS_DAX() check in io_is_direct()
Remove the check because DAX now has it's own read/write methods and
file systems which support DAX check IS_DAX() prior to IOCB_DIRECT on
their own. Therefore, it does not matter if the file state is DAX when
the iocb flags are created.
Also remove io_is_direct() as it is just a simple flag check.
Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Linus Torvalds [Sun, 3 May 2020 18:30:08 +0000 (11:30 -0700)]
Merge tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A few more stability fixes, minor build warning fixes and git url
fixup:
- fix partial loss of prealloc extent past i_size after fsync
- fix potential deadlock due to wrong transaction handle passing via
journal_info
- fix gcc 4.8 struct intialization warning
- update git URL in MAINTAINERS entry"
* tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
MAINTAINERS: btrfs: fix git repo URL
btrfs: fix gcc-4.8 build warning for struct initializer
btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info
btrfs: fix partial loss of prealloc extent past i_size after fsync
Linus Torvalds [Sun, 3 May 2020 18:04:57 +0000 (11:04 -0700)]
Merge tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Fix a memory leak when dev_iommu gets freed and a sub-pointer does
not
- Build dependency fixes for Mediatek, spapr_tce, and Intel IOMMU
driver
- Export iommu_group_get_for_dev() only for GPLed modules
- Fix AMD IOMMU interrupt remapping when x2apic is enabled
- Fix error path in the QCOM IOMMU driver probe function
* tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/qcom: Fix local_base status check
iommu: Properly export iommu_group_get_for_dev()
iommu/vt-d: Use right Kconfig option name
iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config
iommu/mediatek: Fix MTK_IOMMU dependencies
iommu: Fix the memory leak in dev_iommu_free()
Linus Torvalds [Sat, 2 May 2020 20:45:30 +0000 (13:45 -0700)]
Merge tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- prevent the intel_pstate driver from printing excessive diagnostic
messages in some cases (Chris Wilson)
- make the hibernation restore kernel freeze kernel threads as well as
user space tasks (Dexuan Cui)
- fix the ACPI device PM disagnostic messages to include the correct
power state name (Kai-Heng Feng).
* tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: ACPI: Output correct message on target power state
PM: hibernate: Freeze kernel threads in software_resume()
cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
Linus Torvalds [Sat, 2 May 2020 18:31:12 +0000 (11:31 -0700)]
Merge tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"Hoist the check for an unrepresentable FIBMAP return value into
ioctl_fibmap.
The internal kernel function can handle 64-bit values (and is needed
to fix a regression on ext4 + jbd2). It is only the userspace ioctl
that is so old that it cannot deal"
* tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fibmap: Warn and return an error in case of block > INT_MAX
Linus Torvalds [Sat, 2 May 2020 18:24:01 +0000 (11:24 -0700)]
Merge tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- fix handling of backchannel binding in BIND_CONN_TO_SESSION
Bugfixes:
- Fix a credential use-after-free issue in pnfs_roc()
- Fix potential posix_acl refcnt leak in nfs3_set_acl
- defer slow parts of rpc_free_client() to a workqueue
- Fix an Oopsable race in __nfs_list_for_each_server()
- Fix trace point use-after-free race
- Regression: the RDMA client no longer responds to server disconnect
requests
- Fix return values of xdr_stream_encode_item_{present, absent}
- _pnfs_return_layout() must always wait for layoutreturn completion
Cleanups:
- Remove unreachable error conditions"
* tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a race in __nfs_list_for_each_server()
NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION
SUNRPC: defer slow parts of rpc_free_client() to a workqueue.
NFSv4: Remove unreachable error condition due to rpc_run_task()
SUNRPC: Remove unreachable error condition
xprtrdma: Fix use of xdr_stream_encode_item_{present, absent}
xprtrdma: Fix trace point use-after-free race
xprtrdma: Restore wake-up-all to rpcrdma_cm_event_handler()
nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl
NFS/pnfs: Fix a credential use-after-free issue in pnfs_roc()
NFS/pnfs: Ensure that _pnfs_return_layout() waits for layoutreturn completion
Linus Torvalds [Sat, 2 May 2020 18:16:14 +0000 (11:16 -0700)]
Merge tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Core:
- Documentation typo fixes
- fix the channel indexes
- dmatest: fixes for process hang and iterations
Drivers:
- hisilicon: build error fix without PCI_MSI
- ti-k3: deadlock fix
- uniphier-xdmac: fix for reg region
- pch: fix data race
- tegra: fix clock state"
* tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dmatest: Fix process hang when reading 'wait' parameter
dmaengine: dmatest: Fix iteration non-stop logic
dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization
dmaengine: fix channel index enumeration
dmaengine: mmp_tdma: Reset channel error on release
dmaengine: mmp_tdma: Do not ignore slave config validation errors
dmaengine: pch_dma.c: Avoid data race between probe and irq handler
dt-bindings: dma: uniphier-xdmac: switch to single reg region
include/linux/dmaengine: Typos fixes in API documentation
dmaengine: xilinx_dma: Add missing check for empty list
dmaengine: ti: k3-psil: fix deadlock on error path
dmaengine: hisilicon: Fix build error without PCI_MSI
Linus Torvalds [Sat, 2 May 2020 00:19:15 +0000 (17:19 -0700)]
Merge tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao)
- Fix a potential math overflow (Yan Zhao)
- Use follow_pfn() for calculating PFNMAPs (Sean Christopherson)
* tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()
vfio: avoid possible overflow in vfio_iommu_type1_pin_pages
vfio: checking of validity of user vaddr in vfio_dma_rw
Linus Torvalds [Sat, 2 May 2020 00:03:06 +0000 (17:03 -0700)]
Merge tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fix for statx not grabbing the file table, making AT_EMPTY_PATH fail
- Cover a few cases where async poll can handle retry, eliminating the
need for an async thread
- fallback request busy/free fix (Bijan)
- syzbot reported SQPOLL thread exit fix for non-preempt (Xiaoguang)
- Fix extra put of req for sync_file_range (Pavel)
- Always punt splice async. We'll improve this for 5.8, but wanted to
eliminate the inode mutex lock from the non-blocking path for 5.7
(Pavel)
* tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
io_uring: punt splice async because of inode mutex
io_uring: check non-sync defer_list carefully
io_uring: fix extra put in sync_file_range()
io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
io_uring: use proper references for fallback_req locking
io_uring: only force async punt if poll based retry can't handle it
io_uring: enable poll retry for any file with ->read_iter / ->write_iter
io_uring: statx must grab the file table for valid fd
Linus Torvalds [Fri, 1 May 2020 18:13:36 +0000 (11:13 -0700)]
Merge tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes for this release:
- NVMe pull request from Christoph, with a single fix for a double
free in the namespace error handling.
- Kill the bd_openers check in blk_drop_partitions(), fixing a
regression in this merge window (Christoph)"
* tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
block: remove the bd_openers checks in blk_drop_partitions
nvme: prevent double free in nvme_alloc_ns() error handling
Linus Torvalds [Fri, 1 May 2020 18:10:09 +0000 (11:10 -0700)]
Merge branch 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Three driver bugfixes, and two reverts because the original patches
revealed underlying problems which the Tegra guys are now working on"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Avoid i2c interrupt status clear race condition.
i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"
Revert "i2c: tegra: Synchronize DMA before termination"
i2c: iproc: generate stop event for slave writes
Linus Torvalds [Fri, 1 May 2020 18:05:28 +0000 (11:05 -0700)]
Merge tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a collection of small fixes around this time:
- One more try for fixing PCM OSS regression
- HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
a lock fix in the minor error path, and a fix for the possible race
at monitor notifiaction
- USB-audio: a quirk ID fix, a fix for POD HD500 workaround"
* tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
ALSA: opti9xx: shut up gcc-10 range warning
ALSA: hda/hdmi: fix without unlocked before return
ALSA: hda/hdmi: fix race in monitor detection during probe
ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
ALSA: line6: Fix POD HD500 audio playback
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly (for 5.7)
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
ALSA: hda: Match both PCI ID and SSID for driver blacklist
Linus Torvalds [Fri, 1 May 2020 18:01:51 +0000 (11:01 -0700)]
Merge tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular scheduled fixes for graphics. Nothing to extreme bunch of
amdgpu fixes, i915 and qxl fixes, along with some misc ones.
All seems to be progressing normally.
core:
- EDID off by one DTD fix
- DP mst write return code fix
dma-buf:
- fix SET_NAME ioctl uapi
- doc fixes
amdgpu:
- Fix a green screen on resume issue
- PM fixes for SR-IOV SDMA fix for navi
- Renoir display fixes
- Cursor and pageflip stuttering fixes
- Misc additional display fixes
- (uapi) Add additional DCC tiling flags for navi1x
qxl:
- use after gree fix
- fix lost kunmap
- release leak fix
virtio:
- context destruction fix"
* tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits)
dma-buf: fix documentation build warnings
drm/qxl: qxl_release use after free
drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
drm/i915: Use proper fault mask in interrupt postinstall too
drm/amd/display: Use cursor locking to prevent flip delays
drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
drm/amd/display: Defer cursor update around VUPDATE for all ASIC
drm/amd/display: fix rn soc bb update
drm/amd/display: check if REFCLK_CNTL register is present
drm/amdgpu: bump version for invalidate L2 before SDMA IBs
drm/amdgpu: invalidate L2 before SDMA IBs (v2)
drm/amdgpu: add tiling flags from Mesa
drm/amd/powerplay: avoid using pm_en before it is initialized revised
Revert "drm/amd/powerplay: avoid using pm_en before it is initialized"
drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
drm/virtio: only destroy created contexts
drm/dp_mst: Fix drm_dp_send_dpcd_write() return code
drm/i915/gt: Check cacheline is valid before acquiring
drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
...
Linus Torvalds [Fri, 1 May 2020 18:00:07 +0000 (11:00 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four minor fixes: three in drivers and one in the core.
The core one allows an additional state change that fixes a regression
introduced by an update to the aacraid driver in the previous merge
window"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target/iblock: fix WRITE SAME zeroing
scsi: qla2xxx: check UNLOADING before posting async work
scsi: qla2xxx: set UNLOADING before waiting for session deletion
scsi: core: Allow the state change from SDEV_QUIESCE to SDEV_BLOCK
Tang Bin [Sat, 18 Apr 2020 13:47:03 +0000 (21:47 +0800)]
iommu/qcom: Fix local_base status check
The function qcom_iommu_device_probe() does not perform sufficient
error checking after executing devm_ioremap_resource(), which can
result in crashes if a critical error path is encountered.
In commit ff8091f26d94 ("drivers/iommu: Export core IOMMU API symbols to
permit modular drivers") a bunch of iommu symbols were exported, all
with _GPL markings except iommu_group_get_for_dev(). That export should
also be _GPL like the others.
Fixes: ff8091f26d94 ("drivers/iommu: Export core IOMMU API symbols to permit modular drivers") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Will Deacon <will@kernel.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: John Garry <john.garry@huawei.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200430120120.2948448-1-gregkh@linuxfoundation.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
Currently, system fails to boot because the legacy interrupt remapping
mode does not enable 128-bit IRTE (GA), which is required for x2APIC
support.
Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with
kernel option amd_iommu_intr=legacy instead. The initialization
logic will check GASup and automatically fallback to using
AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported.
Xiaoguang Wang [Fri, 1 May 2020 00:52:56 +0000 (08:52 +0800)]
io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
While working on to make io_uring sqpoll mode support syscalls that need
struct files_struct, I got cpu soft lockup in io_ring_ctx_wait_and_kill(),
while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
cpu_relax();
above loop never has an chance to exit, it's because preempt isn't enabled
in the kernel, and the context calling io_ring_ctx_wait_and_kill() and
io_sq_thread() run in the same cpu, if io_sq_thread calls a cond_resched()
yield cpu and another context enters above loop, then io_sq_thread() will
always in runqueue and never exit.
Use cond_resched() can fix this issue.
Reported-by: syzbot+66243bb7126c410cefe6@syzkaller.appspotmail.com Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring: only force async punt if poll based retry can't handle it
We do blocking retry from our poll handler, if the file supports polled
notifications. Only mark the request as needing an async worker if we
can't poll for it.
io_uring: enable poll retry for any file with ->read_iter / ->write_iter
We can have files like eventfd where it's perfectly fine to do poll
based retry on them, right now io_file_supports_async() doesn't take
that into account.
Pass in data direction and check the f_op instead of just always needing
an async worker.
Merge tag 'for-5.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Document DM integrity allow_discard feature that was added during 5.7
merge window.
- Fix potential for DM writecache data corruption during DM table
reloads.
- Fix DM verity's FEC support's hash block number calculation in
verity_fec_decode().
- Fix bio-based DM multipath crash due to use of stale copy of
MPATHF_QUEUE_IO flag state in __map_bio().
* tag 'for-5.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm multipath: use updated MPATHF_QUEUE_IO on mapping for bio-based mpath
dm verity fec: fix hash block number in verity_fec_decode
dm writecache: fix data corruption when reloading the target
dm integrity: document allow_discard option
Merge tag 'selinux-pr-20200430' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Two more SELinux patches to fix problems in the v5.7-rcX releases.
Wei Yongjun's patch fixes a return code in an error path, and my patch
fixes a problem where we were not correctly applying access controls
to all of the netlink messages in the netlink_send LSM hook"
* tag 'selinux-pr-20200430' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: properly handle multiple messages in selinux_netlink_send()
selinux: fix error return code in cond_read_list()
Merge tag 'linux-kselftest-kunit-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fix from Shuah Khan:
"A single fix to flush the test summary to the console log without
delay"
* tag 'linux-kselftest-kunit-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Add missing newline in summary message
Merge tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- ftrace test fixes to check for required filter files and kprobe args.
- Kselftest build/cross-build dependency check script to make it easier
for test ring admins/users to configure build systems correctly for
build/cross-build kselftests. Currently checks library dependencies.
- Checks if Kselftests can be built/cross-built on a system running
compile test on a trivial C file with LDLIBS specified for each
individual test in their Makefiles.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
* tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Check the first record for kprobe_args_type.tc
selftests: add build/cross-build dependency check script
selftests/ftrace: Check required filter files before running test
Paul Moore [Tue, 28 Apr 2020 13:59:02 +0000 (09:59 -0400)]
selinux: properly handle multiple messages in selinux_netlink_send()
Fix the SELinux netlink_send hook to properly handle multiple netlink
messages in a single sk_buff; each message is parsed and subject to
SELinux access control. Prior to this patch, SELinux only inspected
the first message in the sk_buff.
Cc: stable@vger.kernel.org Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
The struct nfs_server gets put on the cl_superblocks list before
the server->super field has been initialised, in which case the
call to nfs_sb_active() will Oops. Add a check to ensure that
we skip such a list entry.
arm64: vdso: Add -fasynchronous-unwind-tables to cflags
On arm64 linux gcc uses -fasynchronous-unwind-tables -funwind-tables
by default since gcc-8, so now the de facto platform ABI is to allow
unwinding from async signal handlers.
However on bare metal targets (aarch64-none-elf), and on old gcc,
async and sync unwind tables are not enabled by default to avoid
runtime memory costs.
This means if linux is built with a baremetal toolchain the vdso.so
may not have unwind tables which breaks the gcc platform ABI guarantee
in userspace.
Add -fasynchronous-unwind-tables explicitly to the vgettimeofday.o
cflags to address the ABI change.
Fixes: 51754f958b37 ("arm64: vdso: Substitute gettimeofday() with C implementation") Cc: Will Deacon <will@kernel.org> Reported-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
block: remove the bd_openers checks in blk_drop_partitions
When replacing the bd_super check with a bd_openers I followed a logical
conclusion, which turns out to be utterly wrong. When a block device has
bd_super sets it has a mount file system on it (although not every
mounted file system sets bd_super), but that also implies it doesn't even
have partitions to start with.
So instead of trying to come up with a logical check for all openers,
just remove the check entirely.
Fixes: 0ddb04a50871 ("block: fix busy device checking in blk_drop_partitions") Fixes: 9bb6f718079a ("block: fix busy device checking in blk_drop_partitions again") Reported-by: Michal Koutný <mkoutny@suse.com> Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
fibmap: Warn and return an error in case of block > INT_MAX
We better warn the fibmap user and not return a truncated and therefore
an incorrect block map address if the bmap() returned block address
is greater than INT_MAX (since user supplied integer pointer).
It's better to pr_warn() all user of ioctl_fibmap() and return a proper
error code rather than silently letting a FS corruption happen if the
user tries to fiddle around with the returned block map address.
We fix this by returning an error code of -ERANGE and returning 0 as the
block mapping address in case if it is > INT_MAX.
Now iomap_bmap() could be called from either of these two paths.
Either when a user is calling an ioctl_fibmap() interface to get
the block mapping address or by some filesystem via use of bmap()
internal kernel API.
bmap() kernel API is well equipped with handling of u64 addresses.
WARN condition in iomap_bmap_actor() was mainly added to warn all
the fibmap users. But now that we have directly added this warning
for all fibmap users and also made sure to return 0 as block map address
in case if addr > INT_MAX.
So we can now remove this logic from iomap_bmap_actor().
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Randy Dunlap [Wed, 8 Apr 2020 04:20:34 +0000 (21:20 -0700)]
dma-buf: fix documentation build warnings
Fix documentation warnings in dma-buf.[hc]:
../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach'
../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach'
../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify
i2c: aspeed: Avoid i2c interrupt status clear race condition.
In AST2600 there have a slow peripheral bus between CPU and i2c
controller. Therefore GIC i2c interrupt status clear have delay timing,
when CPU issue write clear i2c controller interrupt status. To avoid
this issue, the driver need have read after write clear at i2c ISR.
Fixes: 9b08748342b7 ("i2c: aspeed: added driver for Aspeed I2C") Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[wsa: added Fixes tag] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
gcc-10 points out a few instances of suspicious integer arithmetic
leading to value truncation:
sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure':
sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
322 | (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask'
351 | snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
| ^~~~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c: In function 'snd_miro_configure':
sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
873 | (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask'
1010 | snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
| ^~~~~~~~~~~~~~~~~~~
These are all harmless here as only the low 8 bit are passed down
anyway. Change the macros to inline functions to make the code
more readable and also avoid the warning.
Strictly speaking those functions also need locking to make the
read/write pair atomic, but it seems unlikely that anyone would
still run into that issue.
Merge tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes.
Specifically:
- fix linker argument to allow linking with lld
- build fix for configurations without a frame pointer
- a handful of build fixes related the SBI 0.1 vs 0.2 split
- remove STRICT_KERNEL_RWX for !MMU, which isn't useful"
* tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU
riscv: sbi: Fix undefined reference to sbi_shutdown
tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI
riscv: sbi: Correct sbi_shutdown() and sbi_clear_ipi() export
riscv: fix vdso build with lld
RISC-V: stacktrace: Declare sp_in_global outside ifdef
iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config
Although SPAPR_TCE_IOMMU itself can be compile tested on certain PowerPC
configurations, its presence makes arch/powerpc/kvm/Makefile to select
modules which do not build in such configuration.
The arch/powerpc/kvm/ modules use kvm_arch.spapr_tce_tables which exists
only with CONFIG_PPC_BOOK3S_64. However these modules are selected when
COMPILE_TEST and SPAPR_TCE_IOMMU are chosen leading to build failures:
In file included from arch/powerpc/include/asm/book3s/64/mmu-hash.h:20:0,
from arch/powerpc/kvm/book3s_64_vio_hv.c:22:
arch/powerpc/include/asm/book3s/64/pgtable.h:17:0: error: "_PAGE_EXEC" redefined [-Werror]
#define _PAGE_EXEC 0x00001 /* execute permission */
In file included from arch/powerpc/include/asm/book3s/32/pgtable.h:8:0,
from arch/powerpc/include/asm/book3s/pgtable.h:8,
from arch/powerpc/include/asm/pgtable.h:18,
from include/linux/mm.h:95,
from arch/powerpc/include/asm/io.h:29,
from include/linux/io.h:13,
from include/linux/irq.h:20,
from arch/powerpc/include/asm/hardirq.h:6,
from include/linux/hardirq.h:9,
from include/linux/kvm_host.h:7,
from arch/powerpc/kvm/book3s_64_vio_hv.c:12:
arch/powerpc/include/asm/book3s/32/hash.h:29:0: note: this is the location of the previous definition
#define _PAGE_EXEC 0x200 /* software: exec allowed */
Fixes: f76d9909dcdf ("iommu: Enable compile testing for some of drivers") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200414142630.21153-1-krzk@kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
drivers/iommu/dma-iommu.o: In function `iommu_dma_mmap':
dma-iommu.c:(.text+0x836): undefined reference to `dma_pgprot'
IOMMU_DMA must not be selected, unless HAS_DMA=y.
Hence fix this by making MTK_IOMMU depend on HAS_DMA.
While at it, remove the dependency on ARM || ARM64, as that is already
implied by the dependency on ARCH_MEDIATEK.
qxl_release should not be accesses after qxl_push_*_ring_release() calls:
userspace driver can process submitted command quickly, move qxl_release
into release_ring, generate interrupt and trigger garbage collector.
It can lead to crashes in qxl driver or trigger memory corruption
in some kmalloc-192 slab object
Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() +
qxl_push_{cursor,command}_ring_release() calls to close that race window.
dm multipath: use updated MPATHF_QUEUE_IO on mapping for bio-based mpath
When adding devices that don't have a scsi_dh on a BIO based multipath,
I was able to consistently hit the warning below and lock-up the system.
The problem is that __map_bio reads the flag before it potentially being
modified by choose_pgpath, and ends up using the older value.
The WARN_ON below is not trivially linked to the issue. It goes like
this: The activate_path delayed_work is not initialized for non-scsi_dh
devices, but we always set MPATHF_QUEUE_IO, asking for initialization.
That is fine, since MPATHF_QUEUE_IO would be cleared in choose_pgpath.
Nevertheless, only for BIO-based mpath, we cache the flag before calling
choose_pgpath, and use the older version when deciding if we should
initialize the path. Therefore, we end up trying to initialize the
paths, and calling the non-initialized activate_path work.
Matt Roper [Fri, 24 Apr 2020 23:14:23 +0000 (16:14 -0700)]
drm/i915: Use proper fault mask in interrupt postinstall too
The IRQ postinstall handling had open-coded pipe fault mask selection
that never got updated for gen11. Switch it to use
gen8_de_pipe_fault_mask() to ensure we don't miss updates for new
platforms.
David Howells [Tue, 28 Apr 2020 20:27:48 +0000 (21:27 +0100)]
Fix use after free in get_tree_bdev()
Commit 73628c3bf113, a fix to get_tree_bdev() put a missing blkdev_put() in
the wrong place, before a warnf() that displays the bdev under
consideration rather after it.
This results in a silent lockup in printk("%pg") called via warnf() from
get_tree_bdev() under some circumstances when there's a race with the
blockdev being frozen. This can be caused by xfstests/tests/generic/085 in
combination with Lukas Czerner's ext4 mount API conversion patchset. It
looks like it ought to occur with other users of get_tree_bdev() such as
XFS, but apparently doesn't.
Fix this by switching the order of the lines.
Fixes: 73628c3bf113 ("vfs: add missing blkdev_put() in get_tree_bdev()") Reported-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ian Kent <raven@themaw.net>
cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drm/amd/display: Use cursor locking to prevent flip delays
[Why]
Current locking scheme for cursor can result in a flip missing
its vsync, deferring it for one or more vsyncs. Result is a
potential for stuttering when cursor is moved.
[How]
Use cursor update lock so that flips are not blocked while cursor
is being programmed.
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Wed, 22 Apr 2020 22:07:57 +0000 (18:07 -0400)]
drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
[WHY]
The downspread percentage was copied over from a previous version
of the display_mode_lib spreadsheet. This value has been updated,
and the previous value is too high to allow for such modes as
4K120hz. The new value is sufficient for such modes.
[HOW]
Update the value in dcn21_resource to match the spreadsheet.
Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Defer cursor update around VUPDATE for all ASIC
[Why]
Fixes the following scenario:
- Flip has been prepared sometime during the frame, update pending
- Cursor update happens right when VUPDATE would happen
- OPTC lock acquired, VUPDATE is blocked until next frame
- Flip is delayed potentially infinitely
With the igt@kms_cursor_legacy cursor-vs-flip-legacy test we can
observe nearly *13* frames of delay for some flips on Navi.
[How]
Apply the Raven workaround generically. When close enough to VUPDATE
block cursor updates from occurring from the dc_stream_set_cursor_*
helpers.
This could perhaps be a little smarter by checking if there were
pending updates or flips earlier in the frame on the HUBP side before
applying the delay, but this should be fine for now.
This fixes the kms_cursor_legacy test.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently RN SOC bounding box update assumes we will get at least
2 clock states from SMU. This isn't always true and because of special
casing on first clock state we end up with low disp, dpp, dsc and phy
clocks.
This change removes the special casing allowing the first state to
acquire correct clocks.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A couple of regressions were found in rc1, as well as another set of
races and bugs:
- A regression where RDMA_CM_EVENT_REJECTED was lost in some cases
- Bad error handling in the CM, uverbs, rvt, siw and i40iw
- Kernel stack memory leak to user space in mlx4
- Missing data in a uapi query for mlx5
- Three races found by syzkaller in the ib core code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Fix race between destroy and release FD object
IB/rdmavt: Always return ERR_PTR from rvt_create_mmap_info()
RDMA/core: Fix overwriting of uobj in case of error
RDMA/core: Prevent mixed use of FDs between shared ufiles
RDMA/uverbs: Fix a race with disassociate and exit_mmap()
RDMA/mlx5: Set GRH fields in query QP on RoCE
RDMA/siw: Fix potential siw_mem refcnt leak in siw_fastreg_mr()
RDMA/mlx4: Initialize ib_spec on the stack
RDMA/cm: Fix an error check in cm_alloc_id_priv()
RDMA/cm: Fix missing RDMA_CM_EVENT_REJECTED event after receiving REJ message
i40iw: fix null pointer dereference on a null wqe pointer
Merge tag 'nfs-rdma-for-5.7-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFSoRDMA Client Fixes for Linux 5.7
Bugfixes:
- Restore wake-up-all to rpcrdma_cm_event_handler()
- Otherwise the client won't respond to server disconnect requests
- Fix tracepoint use-after-free race
- Fix usage of xdr_stream_encode_item_{present, absent}
- These functions return a size on success, and not 0
NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION
Currently, if the client sends BIND_CONN_TO_SESSION with
NFS4_CDFC4_FORE_OR_BOTH but only gets NFS4_CDFS4_FORE back it ignores
that it wasn't able to enable a backchannel.
To make sure, the client sends BIND_CONN_TO_SESSION as the first
operation on the connections (ie., no other session compounds haven't
been sent before), and if the client's request to bind the backchannel
is not satisfied, then reset the connection and retry.
Cc: stable@vger.kernel.org Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
SUNRPC: defer slow parts of rpc_free_client() to a workqueue.
The rpciod workqueue is on the write-out path for freeing dirty memory,
so it is important that it never block waiting for memory to be
allocated - this can lead to a deadlock.
rpc_execute() - which is often called by an rpciod work item - calls
rcp_task_release_client() which can lead to rpc_free_client().
rpc_free_client() makes two calls which could potentially block wating
for memory allocation.
rpc_clnt_debugfs_unregister() calls into debugfs and will block while
any of the debugfs files are being accessed. In particular it can block
while any of the 'open' methods are being called and all of these use
malloc for one thing or another. So this can deadlock if the memory
allocation waits for NFS to complete some writes via rpciod.
rpc_clnt_remove_pipedir() can take the inode_lock() and while it isn't
obvious that memory allocations can happen while the lock it held, it is
safer to assume they might and to not let rpciod call
rpc_clnt_remove_pipedir().
So this patch moves these two calls (together with the final kfree() and
rpciod_down()) into a work-item to be run from the system work-queue.
rpciod can continue its important work, and the final stages of the free
can happen whenever they happen.
I have seen this deadlock on a 4.12 based kernel where debugfs used
synchronize_srcu() when removing objects. synchronize_srcu() requires a
workqueue and there were no free workther threads and none could be
allocated. While debugsfs no longer uses SRCU, I believe the deadlock
is still possible.
Marek Olšák [Sat, 18 Apr 2020 00:50:30 +0000 (20:50 -0400)]
drm/amdgpu: add tiling flags from Mesa
DCC_INDEPENDENT_128B is needed for displayble DCC on gfx10.
SCANOUT is not needed by the kernel, but Mesa uses it.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/powerplay: avoid using pm_en before it is initialized revised
hwmgr->pm_en is initialized at hwmgr_hw_init.
during amdgpu_device_init, there is amdgpu_asic_reset that calls to
soc15_asic_reset (for V320 usecase, Vega10 asic), in which:
1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en)
2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en)
pm_en is used in the above two cases while it has not yet been initialized
So avoid using pm_en in the above two functions for V320 passthrough.
Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
("dmaengine: dmatest: Use fixed point div to calculate iops")
which makes threads not to run, but pending and being kicked off by writing
to the 'run' node. However, it forgot to consider 'wait' routine to avoid
above mentioned case.
In order to fix this, check for really running threads, i.e. with pending
and done flags unset.
It's pity the culprit commit hadn't updated documentation and tested all
possible scenarios.
Kai Vehmanen [Tue, 28 Apr 2020 12:38:36 +0000 (15:38 +0300)]
ALSA: hda/hdmi: fix race in monitor detection during probe
A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.
The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.
Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.
When slave status is I2C_SLAVE_RX_END, generate I2C_SLAVE_STOP
event to i2c_client.
Fixes: 75a1580dbd54 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
selinux: fix error return code in cond_read_list()
Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: ac1380ec8a39 ("selinux: convert cond_list to array") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
Merge tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- regression fixes:
- transaction leak when deleting unused block group
- log cleanup after transaction abort
- fix block group leak when removing fails
- transaction leak if relocation recovery fails
- fix SPDX header
* tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix transaction leak in btrfs_recover_relocation
btrfs: fix block group leak when removing fails
btrfs: drop logs when we've aborted a transaction
btrfs: fix memory leak of transaction when deleting unused block group
btrfs: discard: Use the correct style for SPDX License Identifier
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Two patches from Dexuan fixing suspension bugs
- Three cleanup patches from Andy and Michael
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyper-v: Remove internal types from UAPI header
hyper-v: Use UUID API for exporting the GUID
x86/hyperv: Suspend/resume the VP assist page for hibernation
Drivers: hv: Move AEOI determination to architecture dependent code
Drivers: hv: vmbus: Fix Suspend-to-Idle for Generation-2 VM
drm_dp_mst_wait_tx_reply() returns > 1 if time elapsed in
wait_event_timeout() before check_txmsg_state(mgr, txmsg) evaluated to
true. However, we make the mistake of returning this time from
drm_dp_send_dpcd_write() on success instead of returning the number of
bytes written - causing spontaneous failures during link probing:
[drm:drm_dp_send_link_address [drm_kms_helper]] *ERROR* GUID check on
10:01 failed: 3975
Yikes! So, fix this by returning the number of bytes written on success
instead.
Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: eed1ea7b2209 ("drm/dp_mst: Fix W=1 warnings") Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Sean Paul <sean@poorly.run> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200424190722.775284-1-lyude@redhat.com
Chris Wilson [Mon, 27 Apr 2020 09:30:38 +0000 (10:30 +0100)]
drm/i915/gt: Check cacheline is valid before acquiring
The hwsp_cacheline pointer from i915_request is very, very flimsy. The
i915_request.timeline (and the hwsp_cacheline) are lost upon retiring
(after an RCU grace). Therefore we need to confirm that once we have the
right pointer for the cacheline, it is not in the process of being
retired and disposed of before we attempt to acquire a reference to the
cacheline.
<3>[ 547.208237] BUG: KASAN: use-after-free in active_debug_hint+0x6a/0x70 [i915]
<3>[ 547.208366] Read of size 8 at addr ffff88822a0d2710 by task gem_exec_parall/2536
Chris Wilson [Wed, 22 Apr 2020 07:28:05 +0000 (08:28 +0100)]
drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
While the ggtt vma are protected by their object lifetime, the list
continues until it hits a non-ggtt vma, and that vma is not protected
and may be freed as we inspect it. Hence, we require the obj->vma.lock
to protect the list as we iterate.
An example of forgetting to hold the obj->vma.lock is
Now to take the spinlock during the list iteration, we need to break it
down into two phases. In the first phase under the lock, we cannot sleep
and so must defer the actual work to a second list, protected by the
ggtt->mutex.
We also need to hold the spinlock during creation of a new vma to
serialise with updates of the tiling on the object.
Reported-by: Dave Airlie <airlied@redhat.com> Fixes: dc2b06adfaf3 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422072805.17340-1-chris@chris-wilson.co.uk
(cherry picked from commit cb593e5d2b6d3ad489669914d9fd1c64c7a4a6af) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
igt_ppgtt_pin_update() invokes i915_gem_context_get_vm_rcu(), which
returns a reference of the i915_address_space object to "vm" with
increased refcount.
When igt_ppgtt_pin_update() returns, "vm" becomes invalid, so the
refcount should be decreased to keep refcount balanced.
The reference counting issue happens in two exception handling paths of
igt_ppgtt_pin_update(). When i915_gem_object_create_internal() returns
IS_ERR, the refcnt increased by i915_gem_context_get_vm_rcu() is not
decreased, causing a refcnt leak.
Fix this issue by jumping to "out_vm" label when
i915_gem_object_create_internal() returns IS_ERR.
io_uring: statx must grab the file table for valid fd
Clay reports that OP_STATX fails for a test case with a valid fd
and empty path:
-- Test 0: statx:fd 3: SUCCEED, file mode 100755
-- Test 1: statx:path ./uring_statx: SUCCEED, file mode 100755
-- Test 2: io_uring_statx:fd 3: FAIL, errno 9: Bad file descriptor
-- Test 3: io_uring_statx:path ./uring_statx: SUCCEED, file mode 100755
This is due to statx not grabbing the process file table, hence we can't
lookup the fd in async context. If the fd is valid, ensure that we grab
the file table so we can grab the file from async context.
Andy Shevchenko [Fri, 24 Apr 2020 16:11:42 +0000 (19:11 +0300)]
dmaengine: dmatest: Fix iteration non-stop logic
Under some circumstances, i.e. when test is still running and about to
time out and user runs, for example,
grep -H . /sys/module/dmatest/parameters/*
the iterations parameter is not respected and test is going on and on until
user gives
echo 0 > /sys/module/dmatest/parameters/run
This is not what expected.
The history of this bug is interesting. I though that the commit 44683463bcb1 ("dmatest: add a 'wait' parameter")
is a culprit, but looking closer to the code I think it simple revealed the
broken logic from the day one, i.e. in the commit 8d16729adb9d ("dmaengine: dmatest: add a maximum number of test iterations")
which adds iterations parameter.
So, to the point, the conditional of checking the thread to be stopped being
first part of conjunction logic prevents to check iterations. Thus, we have to
always check both conditions to be able to stop after given iterations.
Since it wasn't visible before second commit appeared, I add a respective
Fixes tag.
Fixes: 44683463bcb1 ("dmatest: add a 'wait' parameter") Cc: Dan Williams <dan.j.williams@intel.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200424161147.16895-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization
DMA synchronization hook checks whether interrupt is raised by testing
corresponding bit in a hardware status register, and thus, clock should
be enabled in this case, otherwise CPU may hang if synchronization is
invoked while Runtime PM is in suspended state. This patch resumes the RPM
during of the DMA synchronization process in order to avoid potential
problems. It is a minor clean up of a previous commit, no real problem is
fixed by this patch because currently RPM is always in a resumed state
while DMA is synchronized, although this may change in the future.
Dave Jiang [Mon, 13 Apr 2020 17:40:12 +0000 (10:40 -0700)]
dmaengine: fix channel index enumeration
When the channel register code was changed to allow hotplug operations,
dynamic indexing wasn't taken into account. When channels are randomly
plugged and unplugged out of order, the serial indexing breaks. Convert
channel indexing to using IDA tracking in order to allow dynamic
assignment. The previous code does not cause any regression bug for
existing channel allocation besides idxd driver since the hotplug usage
case is only used by idxd at this point.
With this change, the chan->idr_ref is also not needed any longer. We can
have a device with no channels registered due to hot plug. The channel
device release code no longer should attempt to free the dma device id on
the last channel release.
btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info
[BUG]
One run of btrfs/063 triggered the following lockdep warning:
============================================
WARNING: possible recursive locking detected
5.6.0-rc7-custom+ #48 Not tainted
--------------------------------------------
kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
other info that might help us debug this:
Possible unsafe locking scenario: