Arun Easi [Thu, 16 Jun 2022 05:35:06 +0000 (22:35 -0700)]
scsi: qla2xxx: Fix losing FCP-2 targets on long port disable with I/Os
FCP-2 devices were not coming back online once they were lost, login
retries exhausted, and then came back up. Fix this by accepting RSCN when
the device is not online.
Link: https://lore.kernel.org/r/20220616053508.27186-10-njavali@marvell.com Fixes: d5638e660741 ("scsi: qla2xxx: Changes to support FCP2 Target") Cc: stable@vger.kernel.org Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arun Easi [Thu, 16 Jun 2022 05:35:03 +0000 (22:35 -0700)]
scsi: qla2xxx: Fix losing FCP-2 targets during port perturbation tests
When a mix of FCP-2 (tape) and non-FCP-2 targets are present, FCP-2 target
state was incorrectly transitioned when both of the targets were gone. Fix
this by ignoring state transition for FCP-2 targets.
Link: https://lore.kernel.org/r/20220616053508.27186-7-njavali@marvell.com Fixes: d5638e660741 ("scsi: qla2xxx: Changes to support FCP2 Target") Cc: stable@vger.kernel.org Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bikash Hazarika [Thu, 16 Jun 2022 05:34:59 +0000 (22:34 -0700)]
scsi: qla2xxx: Add a new v2 dport diagnostic feature
FW requires minimum 72 bytes buffer size for D_port result. Buffer size
1024 is mentioned in the FW spec so buffer size is increased to 1024.
Rewrite the logic to handle START/RESTART command from SDMAPI.
Dmitry Bogdanov [Tue, 7 Jun 2022 13:19:53 +0000 (16:19 +0300)]
scsi: iscsi: Prefer xmit of DataOut over new commands
iscsi_data_xmit() (TX worker) is iterating over the queue of new SCSI
commands concurrently with the queue being replenished. Only after the
queue is emptied will we start sending pending DataOut PDUs. That leads to
DataOut timeout on the target side and to connection reinstatement.
Give priority to pending DataOut commands over new commands.
Link: https://lore.kernel.org/r/20220607131953.11584-1-d.bogdanov@yadro.com Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Alim Akhtar [Wed, 15 Jun 2022 12:12:03 +0000 (17:42 +0530)]
scsi: ufs: host: ufs-exynos: Use already existing definition
UFS core already uses RX_MIN_ACTIVATETIME_CAPABILITY macro, let's use the
same in driver as well instead of having a different macro name for the
same offset.
John Garry [Fri, 10 Jun 2022 16:46:42 +0000 (00:46 +0800)]
scsi: pm8001: Expose hardware queues for pm80xx
In commit 7266bb90ee0d ("scsi: pm80xx: Increase number of supported
queues"), support for 80xx chip was improved by enabling multiple HW
queues.
In this, like other SCSI MQ HBA drivers at the time, the HW queues were not
exposed to upper layer, and instead the driver managed the queues
internally.
However, this management duplicates blk-mq code. In addition, the HW queue
management is sub-optimal for a system where the number of CPUs exceeds the
HW queues - this is because queues are selected in a round-robin fashion,
when it would be better to make adjacent CPUs submit on the same queue. And
finally, the affinity of the completion queue interrupts is not set to
mirror the cpu<->HQ queue mapping, which is suboptimal.
As such, for when MSIX is supported, expose HW queues to upper layer. We
always use queue index #0 for "internal" commands, i.e. anything which does
not come from the block layer, so omit this from the affinity spreading.
John Garry [Fri, 10 Jun 2022 16:46:41 +0000 (00:46 +0800)]
scsi: pm8001: Use non-atomic bitmap ops for tag alloc + free
In pm8001_tag_alloc() we don't require atomic set_bit() as we are already
in atomic context. In pm8001_tag_free() we should use the same host
spinlock to protect clearing the tag (and then don't require the atomic
clear_bit()).
John Garry [Fri, 10 Jun 2022 16:46:40 +0000 (00:46 +0800)]
scsi: pm8001: Set up tags before using them
The current code is buggy in that the tags are set up after they are needed
in pm80xx_chip_init() -> pm80xx_set_sas_protocol_timer_config(). The tag
depth is earlier read in pm80xx_chip_init() -> read_main_config_table().
Add a post init callback to do the pm80xx work which needs to be done after
reading the tags. I don't see a better way to do this.
John Garry [Fri, 10 Jun 2022 16:46:39 +0000 (00:46 +0800)]
scsi: pm8001: Rework shost initial values
Some values in pm8001_prep_sas_ha_init() are set the same as they would be
set in scsi_host_alloc(), or could be in the sht (which would be better),
or later just overwritten, so rework the following:
- cmd_per_lun can be set in the sht
- max_lun and max_channel are as scsi_host_alloc() (so no need to set)
- can_queue is later overwritten (so don't set in
pm8001_prep_sas_ha_init())
Bit[3] of HCI_CLKSTOP_CTRL register is for enabling/disabling MPHY APB
clock. Lets add it to CLK_STOP_MASK, so that the same can be controlled
during clock masking/unmasking.
Link: https://lore.kernel.org/r/20220610104119.66401-6-alim.akhtar@samsung.com Tested-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Thu, 9 Jun 2022 02:24:56 +0000 (11:24 +0900)]
scsi: libsas: Introduce struct smp_rps_resp
Similarly to sas report general and discovery responses, define the
structure struct smp_rps_resp to handle SATA PHY report responses using a
structure with a size that is exactly equal to the sas defined response
size.
With this change, struct smp_resp becomes unused and is removed.
Damien Le Moal [Thu, 9 Jun 2022 02:24:55 +0000 (11:24 +0900)]
scsi: libsas: Introduce struct smp_rg_resp
When compiling with gcc 12, several warnings are thrown by gcc when
compiling drivers/scsi/libsas/sas_expander.c, e.g.:
In function ‘sas_get_ex_change_count’,
inlined from ‘sas_find_bcast_dev’ at
drivers/scsi/libsas/sas_expander.c:1816:8:
drivers/scsi/libsas/sas_expander.c:1781:20: warning: array subscript
‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned
char[32]’ [-Warray-bounds]
1781 | if (rg_resp->result != SMP_RESP_FUNC_ACC) {
| ~~~~~~~^~~~~~~~
This is due to the use of the struct smp_resp to aggregate all possible
response types using a union but allocating a response buffer with a size
exactly equal to the size of the response type needed. This leads to access
to fields of struct smp_resp from an allocated memory area that is smaller
than the size of struct smp_resp.
Fix this by defining struct smp_rg_resp for sas report general responses.
Damien Le Moal [Thu, 9 Jun 2022 02:24:54 +0000 (11:24 +0900)]
scsi: libsas: Introduce struct smp_disc_resp
When compiling with gcc 12, several warnings are thrown by gcc when
compiling drivers/scsi/libsas/sas_expander.c, e.g.:
In function ‘sas_get_phy_change_count’,
inlined from ‘sas_find_bcast_phy.constprop’ at
drivers/scsi/libsas/sas_expander.c:1737:9:
drivers/scsi/libsas/sas_expander.c:1697:39: warning: array subscript
‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned
char[56]’ [-Warray-bounds]
1697 | *pcc = disc_resp->disc.change_count;
| ~~~~~~~~~~~~~~~^~~~~~~~~~~~~
This is due to the use of the struct smp_resp to aggregate all possible
response types using a union but allocating a response buffer with a size
exactly equal to the size of the response type needed. This leads to access
to fields of struct smp_resp from an allocated memory area that is smaller
than the size of struct smp_resp.
Fix this by defining struct smp_disc_resp for sas discovery operations.
Since this structure and the generic struct smp_resp are identical for
the little endian and big endian archs, move the definition of these
structures at the end of include/scsi/sas.h to avoid repeating their
definition.
Quinn Tran [Wed, 8 Jun 2022 11:58:48 +0000 (04:58 -0700)]
scsi: qla2xxx: edif: Fix slow session teardown
User experience slow recovery when target device went through a stop/start
of the authentication application (app_stop/app_start).
Between the period of app_stop and app_start on the target device, target
device choose to send ELS Reject for any receive AUTH ELS command. At this
time, authentication application does not do ELS reject if it encounters
error.
Therefore, AUTH ELS reject signify authentication application is not
running. If driver passes up the AUTH ELS Reject to the authentication
application, then it would result in authentication application
retrying/resending the same AUTH ELS command again + delay.
As a work around, driver should trigger a session tear down where it tells
the local authentication application to also tear down. At the next
relogin, both sides are then synchronized.
Link: https://lore.kernel.org/r/20220608115849.16693-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Wed, 8 Jun 2022 11:58:47 +0000 (04:58 -0700)]
scsi: qla2xxx: edif: Reduce N2N thrashing at app_start time
For N2N + remote WWPN is bigger than local adapter, remote adapter will
login to local adapter while authentication application is not running.
When authentication application starts, the current session in FW needs to
to be invalidated.
Make sure the old session is torn down before triggering a relogin.
Link: https://lore.kernel.org/r/20220608115849.16693-9-njavali@marvell.com Fixes: 03d1f5917d23 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Wed, 8 Jun 2022 11:58:43 +0000 (04:58 -0700)]
scsi: qla2xxx: edif: Fix no login after app start
The scenario is this: User loaded driver but has not started authentication
app. All sessions to secure device will exhaust all login attempts, fail,
and in stay in deleted state. Then some time later the app is started. The
driver will replenish the login retry count, trigger delete to prepare for
secure login. After deletion, relogin is triggered.
For the session that is already deleted, the delete trigger is a no-op. If
none of the sessions trigger a relogin, no progress is made.
Quinn Tran [Wed, 8 Jun 2022 11:58:41 +0000 (04:58 -0700)]
scsi: qla2xxx: edif: Send LOGO for unexpected IKE message
If the session is down and the local port continues to receive AUTH ELS
messages, the driver needs to send back LOGO so that the remote device
knows to tear down its session. Terminate and clean up the AUTH ELS
exchange followed by a passthrough LOGO.
Link: https://lore.kernel.org/r/20220608115849.16693-3-njavali@marvell.com Fixes: ce4d4dd912f3 ("scsi: qla2xxx: edif: Reject AUTH ELS on session down") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Wed, 8 Jun 2022 11:58:40 +0000 (04:58 -0700)]
scsi: qla2xxx: edif: Fix I/O timeout due to over-subscription
The current edif code does not keep track of FW IOCB resources. This led
to IOCB queue full on error recovery (I/O timeout). Make use of the
existing code that tracks IOCB resources to prevent over-subscription.
Link: https://lore.kernel.org/r/20220608115849.16693-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
keliu [Fri, 27 May 2022 08:30:49 +0000 (08:30 +0000)]
scsi: core: iscsi: Directly use ida_alloc()/ida_free()
Use ida_alloc()/ida_free() instead of the deprecated
ida_simple_get()/ida_simple_remove() interface.
Link: https://lore.kernel.org/r/20220527083049.2552526-1-liuke94@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: keliu <liuke94@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dmitry Bogdanov [Mon, 23 May 2022 09:59:05 +0000 (12:59 +0300)]
scsi: target: iscsi: Control authentication per ACL
Add acls/{ACL}/attrib/authentication attribute that controls authentication
for particular ACL. By default, this attribute inherits a value of the
authentication attribute of the target port group to keep backward
compatibility.
Authentication attribute has 3 states:
"0" - authentication is turned off for this ACL
"1" - authentication is required for this ACL
"-1" - authentication is inherited from TPG
Link: https://lore.kernel.org/r/20220523095905.26070-4-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dmitry Bogdanov [Mon, 23 May 2022 09:59:04 +0000 (12:59 +0300)]
scsi: target: iscsi: Extract auth functions
Create functions that answers simple questions: Whether authentication is
required, what credentials, whether connection is autenticated.
Link: https://lore.kernel.org/r/20220523095905.26070-3-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dmitry Bogdanov [Mon, 23 May 2022 09:59:03 +0000 (12:59 +0300)]
scsi: target: iscsi: Add upcast helpers
iSCSI target is cluttered with open-coded container_of() conversions from
se_nacl to iscsi_node_acl. The code could be cleaned by introducing a
helper - to_iscsi_nacl() (similar to other helpers in target core).
While at it, make another iSCSI conversion helper consistent and rename
iscsi_tpg() helper to to_iscsi_tpg().
Link: https://lore.kernel.org/r/20220523095905.26070-2-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 7 Jun 2022 04:46:26 +0000 (21:46 -0700)]
scsi: qla2xxx: edif: Fix n2n login retry for secure device
After initiator has burned up all login retries, target authentication
application begins to run. This triggers a link bounce on target side.
Initiator will attempt another login. Due to N2N, the PRLI [nvme | fcp] can
fail because of the mode mismatch with target. This patch add a few more
login retries to revive the connection.
Link: https://lore.kernel.org/r/20220607044627.19563-11-njavali@marvell.com Fixes: 03d1f5917d23 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 7 Jun 2022 04:46:25 +0000 (21:46 -0700)]
scsi: qla2xxx: edif: Fix n2n discovery issue with secure target
User failed to see disk via n2n topology. Driver used up all login retries
before authentication application started. When authentication application
started, driver did not have enough login retries to connect securely. On
app_start, driver will reset the login retry attempt count.
Link: https://lore.kernel.org/r/20220607044627.19563-10-njavali@marvell.com Fixes: 03d1f5917d23 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 7 Jun 2022 04:46:24 +0000 (21:46 -0700)]
scsi: qla2xxx: edif: Remove old doorbell interface
Recently driver has implemented a new doorbell mechanism via bsg. The new
doorbell tells driver the exact buffer size application has where driver
can fill it up with events. The old doorbell guestimated application buffer
size is 256.
Remove duplicate functionality, the application has moved on to the new
doorbell interface.
Quinn Tran [Tue, 7 Jun 2022 04:46:23 +0000 (21:46 -0700)]
scsi: qla2xxx: edif: Add retry for ELS passthrough
Relating to EDIF, when sending IKE message, updating key or deleting key,
driver can encounter IOCB queue full. Add additional retries to reduce
higher level recovery.
Quinn Tran [Tue, 7 Jun 2022 04:46:21 +0000 (21:46 -0700)]
scsi: qla2xxx: edif: Fix potential stuck session in sa update
When a thread is in the process of reestablish a session, a flag is set to
prevent multiple threads/triggers from doing the same task. This flag was
left on, and any attempt to relogin was locked out. Clear this flag if the
attempt has failed.
Quinn Tran [Tue, 7 Jun 2022 04:46:20 +0000 (21:46 -0700)]
scsi: qla2xxx: edif: Add bsg interface to read doorbell events
Add bsg interface for app to read doorbell events. This interface lets
driver know how much app can read based on return buffer size. When the
next event(s) occur, driver will return the bsg_job with the event(s) in
the return buffer.
If there is no event to read, driver will hold on to the bsg_job up to few
seconds as a way to control the polling interval.
Quinn Tran [Tue, 7 Jun 2022 04:46:19 +0000 (21:46 -0700)]
scsi: qla2xxx: edif: Wait for app to ack on sess down
On session deletion, wait for app to acknowledge before moving on. This
allows both app and driver to stay in sync. In addition, this gives a
chance for authentication app to do any type of cleanup before moving on.
This patch uses GFFID switch command to scan whether remote device is
Target or Initiator mode. Based on that info, driver will not pass up
Initiator info to authentication application. This helps reduce unnecessary
stress for authentication application to deal with unused connections.
Linus Torvalds [Mon, 6 Jun 2022 00:14:03 +0000 (17:14 -0700)]
Merge tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file descriptor fix from Al Viro:
"Fix for breakage in #work.fd this window"
* tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the breakage in close_fd_get_file() calling conventions change
Linus Torvalds [Sun, 5 Jun 2022 18:51:48 +0000 (11:51 -0700)]
bluetooth: don't use bitmaps for random flag accesses
The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.
It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32. It shoudln't have been a bitmap in the first
place. The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.
The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.
So just use a regular integer.
In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).
That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit a1a19b185fa0 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.
Al Viro [Sun, 5 Jun 2022 18:01:42 +0000 (14:01 -0400)]
fix the breakage in close_fd_get_file() calling conventions change
It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table. New variant doesn't, and callers need to be adjusted.
Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com Fixes: 8d392c99b321 ("Unify the primitives for file descriptor closing") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sun, 5 Jun 2022 18:00:43 +0000 (11:00 -0700)]
Merge tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX fix from Thomas Gleixner:
"A single fix for x86/SGX to prevent that memory which is allocated for
an SGX enclave is accounted to the wrong memory control group"
* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Set active memcg prior to shmem allocation
Linus Torvalds [Sun, 5 Jun 2022 17:55:23 +0000 (10:55 -0700)]
Merge tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode updates from Thomas Gleixner:
- Disable late microcode loading by default. Unless the HW people get
their act together and provide a required minimum version in the
microcode header for making a halfways informed decision its just
lottery and broken.
- Warn and taint the kernel when microcode is loaded late
- Remove the old unused microcode loader interface
- Remove a redundant perf callback from the microcode loader
* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove unnecessary perf callback
x86/microcode: Taint and warn on late loading
x86/microcode: Default-disable late loading
x86/microcode: Rip out the OLD_INTERFACE
Linus Torvalds [Sun, 5 Jun 2022 17:53:41 +0000 (10:53 -0700)]
Merge tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Thomas Gleixner:
"A set of small x86 cleanups:
- Remove unused headers in the IDT code
- Kconfig indendation and comment fixes
- Fix all 'the the' typos in one go instead of waiting for bots to
fix one at a time"
* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix all occurences of the "the the" typo
x86/idt: Remove unused headers
x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
Linus Torvalds [Sun, 5 Jun 2022 17:47:06 +0000 (10:47 -0700)]
Merge tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clockevent/clocksource updates from Thomas Gleixner:
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power
states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
clocksource/drivers/timer-sun5i: Convert to SPDX identifier
clocksource/drivers/timer-sun4i: Convert to SPDX identifier
clocksource/drivers/pistachio: Convert to SPDX identifier
clocksource/drivers/orion: Convert to SPDX identifier
clocksource/drivers/lpc32xx: Convert to SPDX identifier
clocksource/drivers/digicolor: Convert to SPDX identifier
clocksource/drivers/armada-370-xp: Convert to SPDX identifier
clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
clocksource/drivers/jcore: Convert to SPDX identifier
clocksource/drivers/bcm_kona: Convert to SPDX identifier
clocksource/drivers/sp804: Avoid error on multiple instances
clocksource/drivers/riscv: Events are stopped during CPU suspend
clocksource/drivers/ixp4xx: Drop boardfile probe path
dt-bindings: timer: Add compatible for Mediatek MT8186
Linus Torvalds [Sun, 5 Jun 2022 17:40:31 +0000 (10:40 -0700)]
Merge tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
- Make the ICL event constraints match reality
- Remove a unused local variable
* tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Remove unused local variable
perf/x86/intel: Fix event constraints for ICL
Linus Torvalds [Sun, 5 Jun 2022 16:45:27 +0000 (09:45 -0700)]
Merge tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
Linus Torvalds [Sun, 5 Jun 2022 16:12:28 +0000 (09:12 -0700)]
Merge tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
Linus Torvalds [Sun, 5 Jun 2022 16:06:03 +0000 (09:06 -0700)]
Merge tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
Linus Torvalds [Sun, 5 Jun 2022 02:07:15 +0000 (19:07 -0700)]
Merge tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pathname updates from Al Viro:
"Several cleanups in fs/namei.c"
* tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
namei: cleanup double word in comment
get rid of dead code in legitimize_root()
fs/namei.c:reserve_stack(): tidy up the call of try_to_unlazy()
Linus Torvalds [Sun, 5 Jun 2022 02:00:05 +0000 (19:00 -0700)]
Merge tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount handling updates from Al Viro:
"Cleanups (and one fix) around struct mount handling.
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't hit
those particular failure exits without fault injection, though"
* tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move mount-related externs from fs.h to mount.h
blob_to_mnt(): kern_unmount() is needed to undo kern_mount()
m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb...
linux/mount.h: trim includes
uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)
Linus Torvalds [Sun, 5 Jun 2022 01:52:00 +0000 (18:52 -0700)]
Merge tag 'pull-18-rc1-work.fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file descriptor updates from Al Viro.
- Descriptor handling cleanups
* tag 'pull-18-rc1-work.fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Unify the primitives for file descriptor closing
fs: remove fget_many and fput_many interface
io_uring_enter(): don't leave f.flags uninitialized
Linus Torvalds [Sun, 5 Jun 2022 00:42:33 +0000 (17:42 -0700)]
Merge tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Nine cifs/smb3 client fixes.
Includes DFS fixes, some cleanup of leagcy SMB1 code, duplicated
message cleanup and a double free and deadlock fix"
* tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix uninitialized pointer in error case in dfs_cache_get_tgt_share
cifs: skip trailing separators of prefix paths
cifs: update internal module number
cifs: version operations for smb20 unneeded when legacy support disabled
cifs: do not build smb1ops if legacy support is disabled
cifs: fix potential deadlock in direct reclaim
cifs: when extending a file with falloc we should make files not-sparse
cifs: remove repeated debug message on cifs_put_smb_ses()
cifs: fix potential double free during failed mount
Masahiro Yamada [Mon, 30 May 2022 09:01:38 +0000 (18:01 +0900)]
modpost: simplify mod->name allocation
mod->name is set to the ELF filename with the suffix ".o" stripped.
The current code calls strdup() and free() to manipulate the string,
but a simpler approach is to pass new_module() with the name length
subtracted by 2.
Also, check if the passed filename ends with ".o" before stripping it.
The current code blindly chops the suffix:
tmp[strlen(tmp) - 2] = '\0'
It will cause buffer under-run if strlen(tmp) < 2;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Masahiro Yamada [Sat, 28 May 2022 15:47:04 +0000 (00:47 +0900)]
kbuild: factor out the common objtool arguments
scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups
for the objtool arguments.
It was difficult to factor out them because all the vmlinux build rules
were written in a shell script. It is somewhat tedious to touch the two
files every time a new objtool option is supported.
To reduce the code duplication, move the objtool for vmlinux.o into
scripts/Makefile.vmlinux_o. Then, move the common macros to Makefile.lib
so they are shared between Makefile.build and Makefile.vmlinux_o.
Linus Torvalds [Sat, 4 Jun 2022 21:04:27 +0000 (14:04 -0700)]
Merge tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- bitmap: optimize bitmap_weight() usage, from me
- lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
Carvalho Chehab
- include/linux/find: Fix documentation, from Anna-Maria Behnsen
- bitmap: fix conversion from/to fix-sized arrays, from me
- bitmap: Fix return values to be unsigned, from Kees Cook
It has been in linux-next for at least a week with no problems.
* tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits)
nodemask: Fix return values to be unsigned
bitmap: Fix return values to be unsigned
KVM: x86: hyper-v: replace bitmap_weight() with hweight64()
KVM: x86: hyper-v: fix type of valid_bank_mask
ia64: cleanup remove_siblinginfo()
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate
lib/bitmap: add test for bitmap_{from,to}_arr64
lib: add bitmap_{from,to}_arr64
lib/bitmap: extend comment for bitmap_(from,to)_arr32()
include/linux/find: Fix documentation
lib/bitmap.c make bitmap_print_bitmask_to_buf parseable
MAINTAINERS: add cpumask and nodemask files to BITMAP_API
arch/x86: replace nodes_weight with nodes_empty where appropriate
mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate
clocksource: replace cpumask_weight with cpumask_empty in clocksource.c
genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate
irq: mips: replace cpumask_weight with cpumask_empty where appropriate
drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate
arch/x86: replace cpumask_weight with cpumask_empty where appropriate
...
Linus Torvalds [Sat, 4 Jun 2022 20:50:23 +0000 (13:50 -0700)]
Merge tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc architecture updates from Helge Deller:
"A fix to prevent crash at bootup if CONFIG_SCHED_MC is enabled, and
add auto-detection of primary graphics card for framebuffer driver"
* tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/stifb: Keep track of hardware path of graphics card
parisc/stifb: Implement fb_is_primary_device()
parisc: fix a crash with multicore scheduler
Linus Torvalds [Sat, 4 Jun 2022 20:42:53 +0000 (13:42 -0700)]
Merge tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"Two cleanup patches for Xen related code and (more important) an
update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
down"
* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: replace xen_remap() with memremap()
MAINTAINERS: Update Xen maintainership
xen: switch gnttab_end_foreign_access() to take a struct page pointer
Linus Torvalds [Sat, 4 Jun 2022 20:33:12 +0000 (13:33 -0700)]
Merge tag 'perf-tools-for-v5.19-2022-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Synthesize task events for pre-existing threads when using 'perf lock
--threads', as we need to show task names.
- Fix unwinding with ld.lld (>= version 10.0) linked objects, where
.eh_frame_hdr and .text are in different PT_LOAD program headers,
which makes perf record --call-graph dwarf fail with such obkects.
- Check if 'perf record' hangs in the ARM SPE (Statistical Profiling
Extensions) 'perf test' entry when recording a workload with forks.
- Trace physical address for Arm SPE events, needed for 'perf c2c' to
locate the memory node for samples.
- Fix sorting in percent_rmt_hitm_cmp() in 'perf c2c'.
- Further support for Intel hybrid systems in the evlist and 'perf
record' code.
- Update IBM s/390 vendor event JSON tables.
- Add metrics (JSON) for Intel Sapphirerapids.
- Update metrics for Intel Alderlake.
- Correct typo of sysf 'event_source' directory in the documentation.
* tag 'perf-tools-for-v5.19-2022-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf vendor events intel: Update metrics for Alderlake
perf vendor events intel: Add metrics for Sapphirerapids
perf c2c: Fix sorting in percent_rmt_hitm_cmp()
perf mem: Trace physical address for Arm SPE events
perf list: Update event description for IBM zEC12/zBC12 to latest level
perf list: Update event description for IBM z196/z114 to latest level
perf list: Update event description for IBM z15 to latest level
perf list: Update event description for IBM z14 to latest level
perf list: Update event description for IBM z13 to latest level
perf list: Update event description for IBM z10 to latest level
perf list: Add IBM z16 event description for s390
perf record: Support sample-read topdown metric group for hybrid platforms
perf lock: Change to synthesize task events
perf unwind: Fix segbase for ld.lld linked objects
perf test arm-spe: Check if perf-record hangs when recording workload with forks
perf docs: Correct typo of event_sources
perf evlist: Extend arch_evsel__must_be_in_group to support hybrid systems
Helge Deller [Thu, 2 Jun 2022 11:50:44 +0000 (13:50 +0200)]
parisc/stifb: Implement fb_is_primary_device()
Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.
Linus Torvalds [Sat, 4 Jun 2022 03:01:25 +0000 (20:01 -0700)]
Merge tag 'gpio-fixes-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use the correct register for regcache sync in gpio-pca953x
- remove unused and potentially harmful code from gpio-adp5588
- MAINTAINERS update
* tag 'gpio-fixes-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: adp5588: Remove support for platform setup and teardown callbacks
gpio: pca953x: use the correct register address to do regcache sync
MAINTAINERS: Update Intel GPIO (PMIC and PCH) to Supported
MAINTAINERS: Update GPIO ACPI library to Supported
Linus Torvalds [Sat, 4 Jun 2022 02:57:25 +0000 (19:57 -0700)]
Merge tag 'regulator-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix that came in during the merge window, fixing an error in the
examples in the DT binding documentation for mt6315"
* tag 'regulator-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6315-regulator: fix invalid allowed mode
* tag 'ntfs3_for_5.19' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: provide block_invalidate_folio to fix memory leak
fs/ntfs3: Fix invalid free in log_replay
fs/ntfs3: Update valid size if -EIOCBQUEUED
fs/ntfs3: Check new size for limits
fs/ntfs3: Fix fiemap + fix shrink file size (to remove preallocated space)
fs/ntfs3: In function ntfs_set_acl_ex do not change inode->i_mode if called from function ntfs_init_acl
fs/ntfs3: Optimize locking in ntfs_save_wsl_perm
fs/ntfs3: Update i_ctime when xattr is added
fs/ntfs3: Restore ntfs_xattr_get_acl and ntfs_xattr_set_acl functions
fs/ntfs3: Keep preallocated only if option prealloc enabled
fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()'
Linus Torvalds [Fri, 3 Jun 2022 23:13:25 +0000 (16:13 -0700)]
Merge tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace_stop cleanups from Eric Biederman:
"While looking at the ptrace problems with PREEMPT_RT and the problems
Peter Zijlstra was encountering with ptrace in his freezer rewrite I
identified some cleanups to ptrace_stop that make sense on their own
and move make resolving the other problems much simpler.
The biggest issue is the habit of the ptrace code to change
task->__state from the tracer to suppress TASK_WAKEKILL from waking up
the tracee. No other code in the kernel does that and it is straight
forward to update signal_wake_up and friends to make that unnecessary.
Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
on the fact that all stopped states except the special stop states can
tolerate spurious wake up and recover their state.
The state of stopped and traced tasked is changed to be stored in
task->jobctl as well as in task->__state. This makes it possible for
the freezer to recover tasks in these special states, as well as
serving as a general cleanup. With a little more work in that
direction I believe TASK_STOPPED can learn to tolerate spurious wake
ups and become an ordinary stop state.
The TASK_TRACED state has to remain a special state as the registers
for a process are only reliably available when the process is stopped
in the scheduler. Fundamentally ptrace needs acess to the saved
register values of a task.
There are bunch of semi-random ptrace related cleanups that were found
while looking at these issues.
One cleanup that deserves to be called out is from commit 312a79ecbf5d
("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This
makes a change that is technically user space visible, in the handling
of what happens to a tracee when a tracer dies unexpectedly. According
to our testing and our understanding of userspace nothing cares that
spurious SIGTRAPs can be generated in that case"
* tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
ptrace: Always take siglock in ptrace_resume
ptrace: Don't change __state
ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
ptrace: Document that wait_task_inactive can't fail
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
signal: Use lockdep_assert_held instead of assert_spin_locked
ptrace: Remove arch_ptrace_attach
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
signal: Replace __group_send_sig_info with send_signal_locked
signal: Rename send_signal send_signal_locked
Linus Torvalds [Fri, 3 Jun 2022 23:03:05 +0000 (16:03 -0700)]
Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 169a5179aab6 ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 14549687236b ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
Linus Torvalds [Fri, 3 Jun 2022 22:54:57 +0000 (15:54 -0700)]
Merge tag 'per-namespace-ipc-sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ipc sysctl namespace updates from Eric Biederman:
"This updates the ipc sysctls so that they are fundamentally per ipc
namespace. Previously these sysctls depended upon a hack to simulate
being per ipc namespace by looking up the ipc namespace in read or
write. With this set of changes the ipc sysctls are registered per ipc
namespace and open looks up the ipc namespace.
Not only does this series of changes ensure the traditional binding at
open time happens, but it sets a foundation for being able to relax
the permission checks to allow a user namspace root to change the ipc
sysctls for an ipc namespace that the user namespace root requires. To
do this requires the ipc namespace to be known at open time"
* tag 'per-namespace-ipc-sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ipc: Remove extra braces
ipc: Check permissions for checkpoint_restart sysctls at open time
ipc: Remove extra1 field abuse to pass ipc namespace
ipc: Use the same namespace to modify and validate
ipc: Store ipc sysctls in the ipc namespace
ipc: Store mqueue sysctls in the ipc namespace
Linus Torvalds [Fri, 3 Jun 2022 22:46:03 +0000 (15:46 -0700)]
firmware_loader: enable XZ by default if compressed support is enabled
Commit 4e9974ca6046 ("firmware: Add the support for ZSTD-compressed
firmware files") added support for ZSTD compression, but in the process
also made the previously default XZ compression a config option.
That means that anybody who upgrades their kernel and does a
make oldconfig
to update their configuration, will end up without the XZ compression
that the configuration used to have.
Add the 'default y' to make sure this doesn't happen.
The whole compression question should probably be improved upon, since
it is now possible to "enable" compression in the kernel config but not
enable any actual compression algorithm, which makes it all very
useless. It makes no sense to ask Kconfig questions that enable
situations that are nonsensical like that.
This at least fixes the immediate problem of a kernel update resulting
in a nonbootable machine because of a missed option.
Fixes: 4e9974ca6046 ("firmware: Add the support for ZSTD-compressed firmware files") Cc: Takashi Iwai <tiwai@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / kernel.git / log