Alexandru Elisei [Thu, 24 Sep 2020 12:37:30 +0000 (13:37 +0100)]
KVM: arm64: Add undocumented return values for PMU device control group
KVM_ARM_VCPU_PMU_V3_IRQ returns -EFAULT if get_user() fails when reading
the interrupt number from kvm_device_attr.addr.
KVM_ARM_VCPU_PMU_V3_INIT returns the error value from kvm_vgic_set_owner().
kvm_arm_pmu_v3_init() checks that the vgic has been initialized and the
interrupt number is valid, but kvm_vgic_set_owner() can still return the
error code -EEXIST if another device has already claimed the interrupt.
Marc Zyngier [Thu, 12 Mar 2020 16:11:24 +0000 (16:11 +0000)]
KVM: arm64: Mask out filtered events in PCMEID{0,1}_EL1
As we can now hide events from the guest, let's also adjust its view of
PCMEID{0,1}_EL1 so that it can figure out why some common events are not
counting as they should.
The astute user can still look into the TRM for their CPU and find out
they've been cheated, though. Nobody's perfect.
It can be desirable to expose a PMU to a guest, and yet not want the
guest to be able to count some of the implemented events (because this
would give information on shared resources, for example.
For this, let's extend the PMUv3 device API, and offer a way to setup a
bitmap of the allowed events (the default being no bitmap, and thus no
filtering).
Userspace can thus allow/deny ranges of event. The default policy
depends on the "polarity" of the first filter setup (default deny if the
filter allows events, and default allow if the filter denies events).
This allows to setup exactly what is allowed for a given guest.
Note that although the ioctl is per-vcpu, the map of allowed events is
global to the VM (it can be setup from any vcpu until the vcpu PMU is
initialized).
Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
Marc Zyngier [Tue, 17 Mar 2020 11:11:56 +0000 (11:11 +0000)]
KVM: arm64: Use event mask matching architecture revision
The PMU code suffers from a small defect where we assume that the event
number provided by the guest is always 16 bit wide, even if the CPU only
implements the ARMv8.0 architecture. This isn't really problematic in
the sense that the event number ends up in a system register, cropping
it to the right width, but still this needs fixing.
In order to make it work, let's probe the version of the PMU that the
guest is going to use. This is done by temporarily creating a kernel
event and looking at the PMUVer field that has been saved at probe time
in the associated arm_pmu structure. This in turn gets saved in the kvm
structure, and subsequently used to compute the event mask that gets
used throughout the PMU code.
Marc Zyngier [Thu, 12 Mar 2020 17:27:36 +0000 (17:27 +0000)]
KVM: arm64: Refactor PMU attribute error handling
The PMU emulation error handling is pretty messy when dealing with
attributes. Let's refactor it so that we have less duplication,
and that it is easy to extend later on.
A functional change is that kvm_arm_pmu_v3_init() used to return
-ENXIO when the PMU feature wasn't set. The error is now reported
as -ENODEV, matching the documentation. -ENXIO is still returned
when the interrupt isn't properly configured.
Xiaofei Tan [Thu, 17 Sep 2020 01:47:49 +0000 (09:47 +0800)]
KVM: arm64: Fix doc warnings in mmu code
Fix following warnings caused by mismatch bewteen function parameters
and comments.
arch/arm64/kvm/mmu.c:128: warning: Function parameter or member 'mmu' not described in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:128: warning: Function parameter or member 'may_block' not described in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:128: warning: Excess function parameter 'kvm' description in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:499: warning: Function parameter or member 'writable' not described in 'kvm_phys_addr_ioremap'
arch/arm64/kvm/mmu.c:538: warning: Function parameter or member 'mmu' not described in 'stage2_wp_range'
arch/arm64/kvm/mmu.c:538: warning: Excess function parameter 'kvm' description in 'stage2_wp_range'
Alexandru Elisei [Tue, 15 Sep 2020 17:04:42 +0000 (18:04 +0100)]
KVM: arm64: Do not flush memslot if FWB is supported
As a result of a KVM_SET_USER_MEMORY_REGION ioctl, KVM flushes the
dcache for the memslot being changed to ensure a consistent view of memory
between the host and the guest: the host runs with caches enabled, and
it is possible for the data written by the hypervisor to still be in the
caches, but the guest is running with stage 1 disabled, meaning data
accesses are to Device-nGnRnE memory, bypassing the caches entirely.
Flushing the dcache is not necessary when KVM enables FWB, because it
forces the guest to uses cacheable memory accesses.
The current behaviour does not change, as the dcache flush helpers execute
the cache operation only if FWB is not enabled, but walking the stage 2
table is avoided.
Alexandru Elisei [Thu, 10 Sep 2020 13:33:51 +0000 (14:33 +0100)]
KVM: arm64: Try PMD block mappings if PUD mappings are not supported
When userspace uses hugetlbfs for the VM memory, user_mem_abort() tries to
use the same block size to map the faulting IPA in stage 2. If stage 2
cannot the same block mapping because the block size doesn't fit in the
memslot or the memslot is not properly aligned, user_mem_abort() will fall
back to a page mapping, regardless of the block size. We can do better for
PUD backed hugetlbfs by checking if a PMD block mapping is supported before
deciding to use a page.
vma_pagesize is an unsigned long, use 1UL instead of 1ULL when assigning
its value.
Andrew Scull [Tue, 15 Sep 2020 10:46:43 +0000 (11:46 +0100)]
KVM: arm64: nVHE: Fix pointers during SMCCC convertion
The host need not concern itself with the pointer differences for the
hyp interfaces that are shared between VHE and nVHE so leave it to the
hyp to handle.
As the SMCCC function IDs are converted into function calls, it is a
suitable place to also convert any pointer arguments into hyp pointers.
This, additionally, eases the reuse of the handlers in different
contexts.
Andrew Scull [Tue, 15 Sep 2020 10:46:42 +0000 (11:46 +0100)]
KVM: arm64: nVHE: Migrate hyp-init to SMCCC
To complete the transition to SMCCC, the hyp initialization is given a
function ID. This looks neater than comparing the hyp stub function IDs
to the page table physical address.
Some care is taken to only clobber x0-3 before the host context is saved
as only those registers can be clobbered accoring to SMCCC. Fortunately,
only a few acrobatics are needed. The possible new tpidr_el2 is moved to
the argument in x2 so that it can be stashed in tpidr_el2 early to free
up a scratch register. The page table configuration then makes use of
x0-2.
Andrew Scull [Tue, 15 Sep 2020 10:46:41 +0000 (11:46 +0100)]
KVM: arm64: nVHE: Migrate hyp interface to SMCCC
Rather than passing arbitrary function pointers to run at hyp, define
and equivalent set of SMCCC functions.
Since the SMCCC functions are strongly tied to the original function
prototypes, it is not expected for the host to ever call an invalid ID
but a warning is raised if this does ever occur.
As __kvm_vcpu_run is used for every switch between the host and a guest,
it is explicitly singled out to be identified before the other function
IDs to improve the performance of the hot path.
Andrew Scull [Tue, 15 Sep 2020 10:46:40 +0000 (11:46 +0100)]
smccc: Use separate variables for args and results
Using the same register-bound variable for both arguments and results
means these values share a type. That type must allow the arguments to
be assigned to it and must also be assignable to the unsigned long
fields of struct arm_smccc_res.
This restriction on types causes compiler warnings when the argument
cannot be implicitly assigned to an unsigned long, for example the
pointers that are used in the KVM hyp interface.
By separating the arguments and results into their own variables, the
type constraint is lifted allowing the arguments to avoid the need for
any type conversion.
Andrew Scull [Tue, 15 Sep 2020 10:46:37 +0000 (11:46 +0100)]
KVM: arm64: nVHE: Handle hyp panics
Restore the host context when panicking from hyp to give the best chance
of the panic being clean.
The host requires that registers be preserved such as x18 for the shadow
callstack. If the panic is caused by an exception from EL1, the host
context is still valid so the panic can return straight back to the
host. If the panic comes from EL2 then it's most likely that the hyp
context is active and the host context needs to be restored.
There are windows before and after the host context is saved and
restored that restoration is attempted incorrectly and the panic won't
be clean.
Andrew Scull [Tue, 15 Sep 2020 10:46:36 +0000 (11:46 +0100)]
KVM: arm64: nVHE: Switch to hyp context for EL2
Save and restore the host context when switching to and from hyp. This
gives hyp its own context that the host will not see as a step towards a
full trust boundary between the two.
SP_EL0 and pointer authentication keys are currently shared between the
host and hyp so don't need to be switched yet.
Andrew Scull [Tue, 15 Sep 2020 10:46:34 +0000 (11:46 +0100)]
KVM: arm64: Restore hyp when panicking in guest context
If the guest context is loaded when a panic is triggered, restore the
hyp context so e.g. the shadow call stack works when hyp_panic() is
called and SP_EL0 is valid when the host's panic() is called.
Use the hyp context's __hyp_running_vcpu field to track when hyp
transitions to and from the guest vcpu so the exception handlers know
whether the context needs to be restored.
Andrew Scull [Tue, 15 Sep 2020 10:46:33 +0000 (11:46 +0100)]
KVM: arm64: Update context references from host to hyp
Hyp now has its own nominal context for saving and restoring its state
when switching to and from a guest. Update the related comments and
utilities to match the new name.
Andrew Scull [Tue, 15 Sep 2020 10:46:32 +0000 (11:46 +0100)]
KVM: arm64: Introduce hyp context
During __guest_enter, save and restore from a new hyp context rather
than the host context. This is preparation for separation of the hyp and
host context in nVHE.
Andrew Scull [Tue, 15 Sep 2020 10:46:31 +0000 (11:46 +0100)]
KVM: arm64: nVHE: Don't consume host SErrors with ESB
The ESB at the start of the host vector may cause SErrors to be consumed
to DISR_EL1. However, this is not checked for the host so the SError
could go unhandled.
Remove the ESB so that SErrors are not consumed but are instead left
pending for the host to consume. __guest_enter already defers entry into
a guest if there are any SErrors pending.
Andrew Scull [Tue, 15 Sep 2020 10:46:30 +0000 (11:46 +0100)]
KVM: arm64: nVHE: Use separate vector for the host
The host is treated differently from the guests when an exception is
taken so introduce a separate vector that is specialized for the host.
This also allows the nVHE specific code to move out of hyp-entry.S and
into nvhe/host.S.
The host is only expected to make HVC calls and anything else is
considered invalid and results in a panic.
Hyp initialization is now passed the vector that is used for the host
and it is swapped for the guest vector during the context switch.
Andrew Scull [Tue, 15 Sep 2020 10:46:29 +0000 (11:46 +0100)]
KVM: arm64: Save chosen hyp vector to a percpu variable
Introduce a percpu variable to hold the address of the selected hyp
vector that will be used with guests. This avoids the selection process
each time a guest is being entered and can be used by nVHE when a
separate vector is introduced for the host.
Andrew Scull [Tue, 15 Sep 2020 10:46:28 +0000 (11:46 +0100)]
KVM: arm64: Choose hyp symbol based on context
Make CHOOSE_HYP_SYM select the symbol of the active hypervisor for the
host, the nVHE symbol for nVHE and the VHE symbol for VHE. The nVHE and
VHE hypervisors see their own symbols without prefixes and trigger a
link error when trying to use a symbol of the other hypervisor.
Andrew Scull [Tue, 15 Sep 2020 10:46:26 +0000 (11:46 +0100)]
KVM: arm64: Remove hyp_panic arguments
hyp_panic is able to find all the context it needs from within itself so
remove the argument. The __hyp_panic wrapper becomes redundant so is
also removed.
Andrew Scull [Tue, 15 Sep 2020 10:46:25 +0000 (11:46 +0100)]
KVM: arm64: Remove __activate_vm wrapper
The __activate_vm wrapper serves no useful function and has a misleading
name as it simply calls __load_guest_stage2 and does not touch
HCR_EL2.VM so remove it.
Also rename __deactivate_vm to __load_host_stage2 to match naming
pattern.
Will Deacon [Fri, 11 Sep 2020 13:25:29 +0000 (14:25 +0100)]
KVM: arm64: Don't constrain maximum IPA size based on host configuration
Now that the guest stage-2 page-tables are managed independently from
the host stage-1 page-tables, we can avoid constraining the IPA size
based on the host and instead limit it only based on the PARange field
of the ID_AA64MMFR0 register.
Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20200911132529.19844-22-will@kernel.org
Will Deacon [Fri, 11 Sep 2020 13:25:27 +0000 (14:25 +0100)]
KVM: arm64: Remove unused page-table code
Now that KVM is using the generic page-table code to manage the guest
stage-2 page-tables, we can remove a bunch of unused macros, #defines
and static inline functions from the old implementation.
Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20200911132529.19844-20-will@kernel.org
Will Deacon [Fri, 11 Sep 2020 13:25:25 +0000 (14:25 +0100)]
KVM: arm64: Convert user_mem_abort() to generic page-table API
Convert user_mem_abort() to call kvm_pgtable_stage2_relax_perms() when
handling a stage-2 permission fault and kvm_pgtable_stage2_map() when
handling a stage-2 translation fault, rather than walking the page-table
manually.
Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20200911132529.19844-18-will@kernel.org
KVM: arm64: Convert memslot cache-flushing code to generic page-table API
Convert stage2_flush_memslot() to call the kvm_pgtable_stage2_flush()
function of the generic page-table code instead of walking the page-table
directly.
Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200911132529.19844-16-will@kernel.org
KVM: arm64: Convert write-protect operation to generic page-table API
Convert stage2_wp_range() to call the kvm_pgtable_stage2_wrprotect()
function of the generic page-table code instead of walking the page-table
directly.
Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200911132529.19844-14-will@kernel.org
Will Deacon [Fri, 11 Sep 2020 13:25:13 +0000 (14:25 +0100)]
KVM: arm64: Add support for creating kernel-agnostic stage-2 page tables
Introduce alloc() and free() functions to the generic page-table code
for guest stage-2 page-tables and plumb these into the existing KVM
page-table allocator. Subsequent patches will convert other operations
within the KVM allocator over to the generic code.
Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20200911132529.19844-6-will@kernel.org
Will Deacon [Fri, 11 Sep 2020 13:25:12 +0000 (14:25 +0100)]
KVM: arm64: Use generic allocator for hyp stage-1 page-tables
Now that we have a shiny new page-table allocator, replace the hyp
page-table code with calls into the new API. This also allows us to
remove the extended idmap code, as we can now simply ensure that the
VA size is large enough to map everything we need.
Will Deacon [Fri, 11 Sep 2020 13:25:11 +0000 (14:25 +0100)]
KVM: arm64: Add support for creating kernel-agnostic stage-1 page tables
The generic page-table walker is pretty useless as it stands, because it
doesn't understand enough to allocate anything. Teach it about stage-1
page-tables, and hook up an API for allocating these for the hypervisor
at EL2.
Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20200911132529.19844-4-will@kernel.org
The KVM page-table code is intricately tied into the kernel page-table
code and re-uses the pte/pmd/pud/p4d/pgd macros directly in an attempt
to reduce code duplication. Unfortunately, the reality is that there is
an awful lot of code required to make this work, and at the end of the
day you're limited to creating page-tables with the same configuration
as the host kernel. Furthermore, lifting the page-table code to run
directly at EL2 on a non-VHE system (as we plan to to do in future
patches) is practically impossible due to the number of dependencies it
has on the core kernel.
Introduce a framework for walking Armv8 page-tables configured
independently from the host kernel.
Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20200911132529.19844-3-will@kernel.org
Merge tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block
Pull more io_uring fixes from Jens Axboe:
"Two followup fixes. One is fixing a regression from this merge window,
the other is two commits fixing cancelation of deferred requests.
Both have gone through full testing, and both spawned a few new
regression test additions to liburing.
- Don't play games with const, properly store the output iovec and
assign it as needed.
- Deferred request cancelation fix (Pavel)"
* tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block:
io_uring: fix linked deferred ->files cancellation
io_uring: fix cancel of deferred reqs with ->files
io_uring: fix explicit async read/write mapping for large segments
Merge tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- three Intel VT-d fixes to fix address handling on 32bit, fix a NULL
pointer dereference bug and serialize a hardware register access as
required by the VT-d spec.
- two patches for AMD IOMMU to force AMD GPUs into translation mode
when memory encryption is active and disallow using IOMMUv2
functionality. This makes the AMDGPU driver work when memory
encryption is active.
- two more fixes for AMD IOMMU to fix updating the Interrupt Remapping
Table Entries.
- MAINTAINERS file update for the Qualcom IOMMU driver.
* tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Handle 36bit addressing for x86-32
iommu/amd: Do not use IOMMUv2 functionality when SME is active
iommu/amd: Do not force direct mapping when SME is active
iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE
iommu/amd: Restore IRTE.RemapEn bit after programming IRTE
iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set()
iommu/vt-d: Serialize IOMMU GCMD register modifications
MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers move
Merge tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- more generic entry code ABI fallout
- debug register handling bugfixes
- fix vmalloc mappings on 32-bit kernels
- kprobes instrumentation output fix on 32-bit kernels
- fix over-eager WARN_ON_ONCE() on !SMAP hardware
- NUMA debugging fix
- fix Clang related crash on !RETPOLINE kernels
* tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Unbreak 32bit fast syscall
x86/debug: Allow a single level of #DB recursion
x86/entry: Fix AC assertion
tracing/kprobes, x86/ptrace: Fix regs argument order for i386
x86, fakenuma: Fix invalid starting node ID
x86/mm/32: Bring back vmalloc faulting on x86_32
x86/cmdline: Disable jump tables for cmdline.c
Merge tags 'auxdisplay-for-linus-v5.9-rc4', 'clang-format-for-linus-v5.9-rc4' and 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux
Pull misc fixes from Miguel Ojeda:
"A trivial patch for auxdisplay:
- Replace HTTP links with HTTPS ones (Alexander A. Klimov)
The usual clang-format trivial update:
- Update with the latest for_each macro list (Miguel Ojeda)
And Luc requested me to pick a sparse fix on my queue, so here it goes
along with other two trivial Compiler Attributes ones (also from Luc).
- sparse: use static inline for __chk_{user,io}_ptr() (Luc Van
Oostenryck)
- Compiler Attributes: remove comment about sparse not supporting
__has_attribute (Luc Van Oostenryck)"
* tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
auxdisplay: Replace HTTP links with HTTPS ones
* tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
clang-format: Update with the latest for_each macro list
* tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
sparse: use static inline for __chk_{user,io}_ptr()
Compiler Attributes: fix comment concerning GCC 4.6
Compiler Attributes: remove comment about sparse not supporting __has_attribute
Merge tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- HSDK-4xd Dev system: perf driver updates for sampling interrupt
- HSDK* Dev System: Ethernet broken [Evgeniy Didin]
- HIGHMEM broken (2 memory banks) [Mike Rapoport]
- show_regs() rewrite once and for all
- Other minor fixes
* tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id
arc: fix memory initialization for systems with two memory banks
irqchip/eznps: Fix build error for !ARC700 builds
ARC: show_regs: fix r12 printing and simplify
ARC: HSDK: wireup perf irq
ARC: perf: don't bail setup if pct irq missing in device-tree
ARC: pgalloc.h: delete a duplicated word + other fixes
Subsystems affected by this patch series: MAINTAINERS, ipc, fork,
checkpatch, lib, and mm (memcg, slub, pagemap, madvise, migration,
hugetlb)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
mm: memcg: fix memcg reclaim soft lockup
memcg: fix use-after-free in uncharge_batch
Jason Gunthorpe [Fri, 4 Sep 2020 23:36:19 +0000 (16:36 -0700)]
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
Otherwise gcc generates warnings if the expression is complicated.
Fixes: 312a0c170945 ("[PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/0-v1-8a2697e3c003+41165-log_brackets_jgg@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 4 Sep 2020 23:36:16 +0000 (16:36 -0700)]
mm/khugepaged.c: fix khugepaged's request size in collapse_file
collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to
be read to page_cache_sync_readahead(). The intent was probably to read
a single page. Fix it to use the number of pages to the end of the
window instead.
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yang Shi <shy828301@gmail.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Eric Biggers <ebiggers@google.com> Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Fri, 4 Sep 2020 23:36:13 +0000 (16:36 -0700)]
mm/hugetlb: fix a race between hugetlb sysctl handlers
There is a race between the assignment of `table->data` and write value
to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on
the other thread.
Fix this by duplicating the `table`, and only update the duplicate of
it. And introduce a helper of proc_hugetlb_doulongvec_minmax() to
simplify the code.
Li Xinhai [Fri, 4 Sep 2020 23:36:10 +0000 (16:36 -0700)]
mm/hugetlb: try preferred node first when alloc gigantic page from cma
Since commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic
hugepages using cma"), the gigantic page would be allocated from node
which is not the preferred node, although there are pages available from
that node. The reason is that the nid parameter has been ignored in
alloc_gigantic_page().
Besides, the __GFP_THISNODE also need be checked if user required to
alloc only from the preferred node.
After this patch, the preferred node is tried first before other allowed
nodes, and don't try to allocate from other nodes if __GFP_THISNODE is
specified. If user don't specify the preferred node, the current node
will be used as preferred node, which makes sure consistent behavior of
allocating gigantic and non-gigantic hugetlb page.
Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Link: https://lkml.kernel.org/r/20200902025016.697260-1-lixinhai.lxh@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ralph Campbell [Fri, 4 Sep 2020 23:36:07 +0000 (16:36 -0700)]
mm/migrate: preserve soft dirty in remove_migration_pte()
The code to remove a migration PTE and replace it with a device private
PTE was not copying the soft dirty bit from the migration entry. This
could lead to page contents not being marked dirty when faulting the page
back from device private memory.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Link: https://lkml.kernel.org/r/20200831212222.22409-3-rcampbell@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/migrate: preserve soft dirty in remove_migration_pte()".
I happened to notice this from code inspection after seeing Alistair
Popple's patch ("mm/rmap: Fixup copying of soft dirty and uffd ptes").
This patch (of 2):
The check for is_zone_device_page() and is_device_private_page() is
unnecessary since the latter is sufficient to determine if the page is a
device private page. Simplify the code for easier reading.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Link: https://lkml.kernel.org/r/20200831212222.22409-1-rcampbell@nvidia.com Link: https://lkml.kernel.org/r/20200831212222.22409-2-rcampbell@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/rmap: fixup copying of soft dirty and uffd ptes
During memory migration a pte is temporarily replaced with a migration
swap pte. Some pte bits from the existing mapping such as the soft-dirty
and uffd write-protect bits are preserved by copying these to the
temporary migration swap pte.
However these bits are not stored at the same location for swap and
non-swap ptes. Therefore testing these bits requires using the
appropriate helper function for the given pte type.
Unfortunately several code locations were found where the wrong helper
function is being used to test soft_dirty and uffd_wp bits which leads to
them getting incorrectly set or cleared during page-migration.
Fix these by using the correct tests based on pte type.
Commit f45ec5ff16a75 ("userfaultfd: wp: support swap and page migration")
introduced support for tracking the uffd wp bit during page migration.
However the non-swap PTE variant was used to set the flag for zone device
private pages which are a type of swap page.
This leads to corruption of the swap offset if the original PTE has the
uffd_wp flag set.
Yang Shi [Fri, 4 Sep 2020 23:35:55 +0000 (16:35 -0700)]
mm: madvise: fix vma user-after-free
The syzbot reported the below use-after-free:
BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline]
BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline]
BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996
It is because vma is accessed after releasing mmap_lock, but someone
else acquired the mmap_lock and the vma is gone.
Releasing mmap_lock after accessing vma should fix the problem.
Fixes: 692fe62433d4c ("mm: Handle MADV_WILLNEED through vfs_fadvise()") Reported-by: syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> [5.4+] Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch: fix the usage of capture group ( ... )
The usage of "capture group (...)" in the immediate condition after `&&`
results in `$1` being uninitialized. This issues a warning "Use of
uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl
line 2638".
I noticed this bug while running checkpatch on the set of commits from
v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in
their commit message.
This bug was introduced in the script by commit e518e9a59ec3
("checkpatch: emit an error when there's a diff in a changelog"). It
has been in the script since then.
The author intended to store the match made by capture group in variable
`$1`. This should have contained the name of the file as `[\w/]+`
matched. However, this couldn't be accomplished due to usage of capture
group and `$1` in the same regular expression.
Fix this by placing the capture group in the condition before `&&`.
Thus, `$1` can be initialized to the text that capture group matches
thereby setting it to the desired and required value.
Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog") Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Joe Perches <joe@perches.com> Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fork: adjust sysctl_max_threads definition to match prototype
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
definition of sysctl_max_threads to match its prototype in
linux/sysctl.h which fixes the following sparse error/warning:
kernel/fork.c:3050:47: warning: incorrect type in argument 3 (different address spaces)
kernel/fork.c:3050:47: expected void *
kernel/fork.c:3050:47: got void [noderef] __user *buffer
kernel/fork.c:3036:5: error: symbol 'sysctl_max_threads' redeclared with different type (incompatible argument 3 (different address spaces)):
kernel/fork.c:3036:5: int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... )
kernel/fork.c: note: in included file (through include/linux/key.h, include/linux/cred.h, include/linux/sched/signal.h, include/linux/sched/cputime.h):
include/linux/sysctl.h:242:5: note: previously declared as:
include/linux/sysctl.h:242:5: int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... )
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200825093647.24263-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of proc_ipc_sem_dointvec to match ctl_table.proc_handler which
fixes the following sparse error/warning:
ipc/ipc_sysctl.c:94:47: warning: incorrect type in argument 3 (different address spaces)
ipc/ipc_sysctl.c:94:47: expected void *buffer
ipc/ipc_sysctl.c:94:47: got void [noderef] __user *buffer
ipc/ipc_sysctl.c:194:35: warning: incorrect type in initializer (incompatible argument 3 (different address spaces))
ipc/ipc_sysctl.c:194:35: expected int ( [usertype] *proc_handler )( ... )
ipc/ipc_sysctl.c:194:35: got int ( * )( ... )
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200825105846.5193-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: track page table modifications in __apply_to_page_range()
__apply_to_page_range() is also used to change and/or allocate
page-table pages in the vmalloc area of the address space. Make sure
these changes get synchronized to other page-tables in the system by
calling arch_sync_kernel_mappings() when necessary.
The impact appears limited to x86-32, where apply_to_page_range may miss
updating the PMD. That leads to explosions in drivers like
Nominate Nathan and myself to be point of contact for clang/LLVM related
support, after a poll at the LLVM BoF at Linux Plumbers Conf 2020.
While corporate sponsorship is beneficial, its important to not entrust
the keys to the nukes with any one entity. Should Nathan and I find
ourselves at the same employer, I would gladly step down.
Robert Richter [Fri, 4 Sep 2020 23:35:33 +0000 (16:35 -0700)]
MAINTAINERS: update Cavium/Marvell entries
I am leaving Marvell and already do not have access to my @marvell.com
email address. So switching over to my korg mail address or removing my
address there another maintainer is already listed. For the entries
there no other maintainer is listed I will keep looking into patches for
Cavium systems for a while until someone from Marvell takes it over.
Since I might have limited access to hardware and also limited time I
changed state to 'Odd Fixes' for those entries.
Signed-off-by: Robert Richter <rric@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ganapatrao Kulkarni <gkulkarni@marvell.com> Cc: Sunil Goutham <sgoutham@marvell.com> CC: Borislav Petkov <bp@alien8.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <wsa@kernel.org>, Link: https://lkml.kernel.org/r/20200824122050.31164-1-rric@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in
deactivate_slab()") suffered an update when picked up from LKML [1].
Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()'
created a no-op statement. Fix it by sticking to the behavior intended
in the original patch [1]. In addition, make freelist_corrupted()
immune to passing NULL instead of &freelist.
The issue has been spotted via static analysis and code review.
It only happens on our 1-vcpu instances, because there's no chance for
oom reaper to run to reclaim the to-be-killed process.
Add a cond_resched() at the upper shrink_node_memcgs() to solve this
issue, this will mean that we will get a scheduling point for each memcg
in the reclaimed hierarchy without any dependency on the reclaimable
memory in that memcg thus making it more predictable.
Suggested-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Chris Down <chris@chrisdown.name> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: http://lkml.kernel.org/r/1598495549-67324-1-git-send-email-xlpang@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1a3e1f40962c ("mm: memcontrol: decouple reference counting from
page accounting") reworked the memcg lifetime to be bound the the struct
page rather than charges. It also removed the css_put_many from
uncharge_batch and that is causing the above splat.
uncharge_batch() is supposed to uncharge accumulated charges for all
pages freed from the same memcg. The queuing is done by uncharge_page
which however drops the memcg reference after it adds charges to the
batch. If the current page happens to be the last one holding the
reference for its memcg then the memcg is OK to go and the next page to
be freed will trigger batched uncharge which needs to access the memcg
which is gone already.
Fix the issue by taking a reference for the memcg in the current batch.
Fixes: 1a3e1f40962c ("mm: memcontrol: decouple reference counting from page accounting") Reported-by: syzbot+b305848212deec86eabe@syzkaller.appspotmail.com Reported-by: syzbot+b5ea6fb6f139c8b9482b@syzkaller.appspotmail.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Hugh Dickins <hughd@google.com> Link: https://lkml.kernel.org/r/20200820090341.GC5033@dhcp22.suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'xfs-5.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"Fix a broken metadata verifier that would incorrectly validate attr
fork extents of a realtime file against the realtime volume"
* tag 'xfs-5.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix xfs_bmap_validate_extent_raw when checking attr fork of rt files
When running in a dax mode, if the user maps a page with MAP_PRIVATE and
PROT_WRITE, the xfs filesystem would incorrectly update ctime and mtime
when the user hits a COW fault.
This breaks building of the Linux kernel. How to reproduce:
1. extract the Linux kernel tree on dax-mounted xfs filesystem
2. run make clean
3. run make -j12
4. run make -j12
at step 4, make would incorrectly rebuild the whole kernel (although it
was already built in step 3).
The reason for the breakage is that almost all object files depend on
objtool. When we run objtool, it takes COW page fault on its .data
section, and these faults will incorrectly update the timestamp of the
objtool binary. The updated timestamp causes make to rebuild the whole
tree.
When running in a dax mode, if the user maps a page with MAP_PRIVATE and
PROT_WRITE, the ext2 filesystem would incorrectly update ctime and mtime
when the user hits a COW fault.
This breaks building of the Linux kernel. How to reproduce:
1. extract the Linux kernel tree on dax-mounted ext2 filesystem
2. run make clean
3. run make -j12
4. run make -j12
at step 4, make would incorrectly rebuild the whole kernel (although it
was already built in step 3).
The reason for the breakage is that almost all object files depend on
objtool. When we run objtool, it takes COW page fault on its .data
section, and these faults will incorrectly update the timestamp of the
objtool binary. The updated timestamp causes make to rebuild the whole
tree.
io_uring: fix explicit async read/write mapping for large segments
If we exceed UIO_FASTIOV, we don't handle the transition correctly
between an allocated vec for requests that are queued with IOSQE_ASYNC.
Store the iovec appropriately and re-set it in the iter iov in case
it changed.
Fixes: ff6165b2d7f6 ("io_uring: retain iov_iter state over io_read/io_write calls") Reported-by: Nick Hill <nick@nickhill.org> Tested-by: Norman Maurer <norman.maurer@googlemail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix GENERIC_LOCKBREAK dependency on PREEMPTION in Kconfig broken
because of a typo
- Update defconfigs
* tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390: fix GENERIC_LOCKBREAK dependency typo in Kconfig
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the loading of modules built with binutils-2.35. This version
produces writable and executable .text.ftrace_trampoline section
which is rejected by the kernel.
- Remove the exporting of cpu_logical_map() as the Tegra driver has now
been fixed and no longer uses this function.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE
arm64: Remove exporting cpu_logical_map symbol
Merge tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix documents
- fix warning in 'make localmodconfig'
* tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove redundant assignment prompt = prompt
kbuild: Documentation: clean up makefiles.rst
kconfig: streamline_config.pl: check defined(ENV variable) before using it
Documentation/llvm: Improve formatting of commands, variables, and arguments
Merge tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix reference counting in the operating performance points (OPP)
framework and address a few intel_pstate driver issues, mostly related
to switching driver operation modes and similar with hardware-managed
P-states (HWP) enabled.
- Address intel_pstate driver interface issues, mostly related to
switching operation modes and handling CPU offline and online and
system-wide suspend/resume with hardware-managed P-states (HWP)
enabled (Rafael Wysocki).
- Fix the maximum frequency computation in the intel_pstate driver
with turbo P-states disabled by the platform firmware and HWP
enabled (Francisco Jerez)"
* tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
cpufreq: intel_pstate: Free memory only when turning off
cpufreq: intel_pstate: Add ->offline and ->online callbacks
cpufreq: intel_pstate: Tweak the EPP sysfs interface
cpufreq: intel_pstate: Update cached EPP in the active mode
cpufreq: intel_pstate: Refuse to turn off with HWP enabled
opp: Don't drop reference for an OPP table that was never parsed
Merge tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull libata fixes from Jens Axboe:
- improve Sandisks ATA_HORKAGE on NCQ (Tejun)
- link printk cleanup (Xu)
* tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks
ata: ahci: use ata_link_info() instead of ata_link_printk()
Merge tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
Merge tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- EAGAIN with O_NONBLOCK retry fix
- Two small fixes for registered files (Jiufei)
* tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
io_uring: no read/write-retry on -EAGAIN error and O_NONBLOCK marked file
io_uring: set table->files[i] to NULL when io_sqe_file_register failed
io_uring: fix removing the wrong file in __io_sqe_files_update()
Merge tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix bogus thermal shutdowns for omap4430 where bogus values resulting
from an incorrect ADC conversion are too high and fire an emergency
shutdown (Tony Lindgren)
- Don't suppress negative temp for qcom spmi as they are valid and
userspace needs them (Veera Vegivada)
- Fix use-after-free in thermal_zone_device_unregister reported by
Kasan (Dmitry Osipenko)
* tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: core: Fix use-after-free in thermal_zone_device_unregister()
thermal: qcom-spmi-temp-alarm: Don't suppress negative temp
thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430
Merge tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A couple of core fixes and odd driver fixes for dmaengine subsystem:
Core:
- drop ACPI CSRT table reference after using it
- fix of_dma_router_xlate() error handling
Drivers fixes in idxd, at_hdmac, pl330, dw-edma and jz478"
* tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0
drivers/dma/dma-jz4780: Fix race condition between probe and irq handler
dmaengine: dw-edma: Fix scatter-gather address calculation
dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg
dmaengine: pl330: Fix burst length if burst size is smaller than bus width
dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate()
dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()
dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()
dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling
dmaengine: idxd: reset states after device disable or reset
dmaengine: acpi: Put the CSRT table after using it