David Miller [Mon, 14 Dec 2009 07:56:22 +0000 (23:56 -0800)]
perf sched: Fix build failure on sparc
Here, tvec->tv_usec is "unsigned int" not "unsigned long".
Since the type is different on every platform, it's probably
best to just use long printf formats and cast.
Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091213.235622.53363059.davem@davemloft.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Hitoshi Mitake [Sun, 13 Dec 2009 08:01:59 +0000 (17:01 +0900)]
perf bench: Add "all" pseudo subsystem and "all" pseudo suite
This patch adds a new "all" pseudo subsystem and an "all" pseudo
suite. These are for testing all subsystem and its all suite, or
all suite of one subsystem.
(This patch also contains a few trivial comment fixes for
bench/* and output style fixes. I judged that there are no
necessity to make them into individual patch.)
Example of use:
| % ./perf bench sched all # Test all suites of sched subsystem
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
| Total time: 0.414 [sec]
|
| # Running sched/pipe benchmark...
| # Extecuted 1000000 pipe operations between two tasks
|
| Total time: 10.999 [sec]
|
| 10.999317 usecs/op
| 90914 ops/sec
|
| % ./perf bench all # Test all suites of all subsystems
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
| Total time: 0.420 [sec]
|
| # Running sched/pipe benchmark...
| # Extecuted 1000000 pipe operations between two tasks
|
| Total time: 11.741 [sec]
|
| 11.741346 usecs/op
| 85169 ops/sec
|
| # Running mem/memcpy benchmark...
| # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ...
|
| 808.407437 MB/Sec
That does all the initialization boilerplate, opening the file,
reading the header, checking if it is valid, etc.
And that will as well have the threads list, kmap (now) global
variable, etc, so that we can handle two (or more) perf.data files
describing sessions to compare.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260573842-19720-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Configurable via symbol_conf.sort_by_name, so that the cost of an
extra rb_node on all 'struct symbol' instances is not paid by tools
that only want to decode addresses.
if (map == NULL) {
pr_err("couldn't find map!\n");
kernel_maps__fprintf(stdout);
} else {
struct symbol *sym = map__find_symbol_by_name(map, sym_filter, NULL);
if (sym == NULL)
pr_err("couldn't find symbol %s!\n", sym_filter);
else
pr_info("symbol %s: %#Lx-%#Lx \n", sym_filter, sym->start, sym->end);
}
Looking over the vmlinux/kallsyms is common enough that I'll add a
variable to the upcoming struct perf_session to avoid the need to
use map_groups__find_by_name to get the main vmlinux/kallsyms map.
The above example looks on the 'variable' symtab, but it is just
like that for the functions one.
Also the sort operation is done when we first use
map__find_symbol_by_name, in a lazy way.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260564622-12392-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
if (map == NULL)
pr_err("couldn't find map!\n");
else {
struct symbol *sym = map__find_symbol(map, addr, NULL);
if (sym == NULL)
pr_err("couldn't find addr!\n");
else
pr_info("addr %#Lx is in %s global var\n", addr, sym->name);
}
exit(0);
}
[root@doppio linux-2.6-tip]# grep ' [dD] ' /proc/kallsyms | grep ' sched' ffffffff817827d8 d sched_nr_latency ffffffff81782ce0 d sched_domains_mutex ffffffff8178c070 d schedstr.22423 ffffffff817909a0 d sched_register_mutex ffffffff81823490 d sched_feat_names ffffffff81823558 d scheduler_running ffffffff818235b8 d sched_clock_running ffffffff818235bc D sched_clock_stable ffffffff81824f00 d sched_switch_trace
[root@doppio linux-2.6-tip]# perf top -s 0xffffffff817827d9
addr 0xffffffff817827d9 is in sched_nr_latency global var
[root@doppio linux-2.6-tip]# perf top -s ffffffff81782ce0
addr 0xffffffff81782ce0 is in sched_domains_mutex global var
[root@doppio linux-2.6-tip]#
[root@doppio linux-2.6-tip]# perf top -s ffffffff81782ce0 --vmlinux OFF
The file OFF cannot be used, trying to use /proc/kallsyms...addr 0xffffffff81782ce0 is in sched_domains_mutex global var
[root@doppio linux-2.6-tip]# perf top -s ffffffff818235bc --vmlinux OFF
The file OFF cannot be used, trying to use /proc/kallsyms...addr 0xffffffff818235bc is in sched_clock_stable global var
[root@doppio linux-2.6-tip]#
So it works with both /proc/kallsyms and with ELF symtabs, either
the one on the vmlinux explicitely passed via --vmlinux or in one
in the vmlinux_path that matches the buildid for the running kernel
or the one found in the buildid header section in a perf.data file.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260550239-5372-4-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf symbols: Rename kthreads to kmaps, using another abstraction for it
Using a struct thread instance just to hold the kernel space maps
(vmlinux + modules) is overkill and confuses people trying to
understand the perf symbols abstractions.
The kernel maps are really present in all threads, i.e. the kernel
is a library, not a separate thread.
So introduce the 'map_groups' abstraction and use it for the kernel
maps, now in the kmaps global variable.
It, in turn, will move, together with the threads list to the
perf_file abstraction, so that we can support multiple perf_file
instances, needed by perf diff.
Brainstormed-with: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260550239-5372-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jamie Iles [Fri, 11 Dec 2009 12:20:09 +0000 (12:20 +0000)]
perf tools: Allow building for ARM
Add definitions of rmb() and cpu_relax() and include the ARM
unistd.h header. The __kuser_memory_barrier helper in the helper
page is used to provide the correct memory barrier depending on
the CPU type.
[ The rmb() will work on v6 and v7, segfault on v5. Dynamic
detection to add v5 support will be added later. ]
Signed-off-by: Jamie Iles <jamie.iles@picochip.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mikael Pettersson <mikpe@it.uu.se>
LKML-Reference: <1260534009-5394-1-git-send-email-jamie.iles@picochip.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jamie Iles [Fri, 11 Dec 2009 09:21:00 +0000 (09:21 +0000)]
perf tools: Allow cross compiling
For embedded platforms, we want to be able to build the perf
tools on a build machine to run on a different arch. This patch
allows $CROSS_COMPILE to set the cross compiler.
Additionally, if NO_LIBPERL is set, then don't use perl include
paths as they will be for the host arch.
Define kmem_trace_alloc_{,node}_notrace() if CONFIG_TRACING is
enabled, otherwise perf-kmem will show wrong stats ifndef
CONFIG_KMEM_TRACE, because a kmalloc() memory allocation may
be traced by both trace_kmalloc() and trace_kmem_cache_alloc().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-mm@kvack.org <linux-mm@kvack.org> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <4B21F89A.7000801@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 10 Dec 2009 07:43:34 +0000 (08:43 +0100)]
perf kmem: Fix unused argument build warning
Fix:
builtin-kmem.c: In function 'parse_caller_opt':
builtin-kmem.c:690: error: unused parameter 'arg'
builtin-kmem.c: In function 'parse_alloc_opt':
builtin-kmem.c:697: error: unused parameter 'arg'
Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <4B20A195.8030106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mike Frysinger [Thu, 10 Dec 2009 01:07:03 +0000 (20:07 -0500)]
sched: Mark sched_clock() as notrace
The core ftrace code (trace_clock_local) calls sched_clock()
directly, so we don't want to recurisvely trigger the ftrace
code. Rather than update every sched_clock() definition, tag
the prototype for everyone as notrace.
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1260407223-10900-1-git-send-email-vapier@gentoo.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we have a maximum latency reported for a task, we need a
convenient way to find the matching location to the raw traces
or to perf sched map that shows where the task has been
eventually scheduled in. This gives a pointer to retrieve the
events that occured during this max latency.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260391208-6808-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Xiao Guangrong [Wed, 9 Dec 2009 09:51:30 +0000 (17:51 +0800)]
perf sched: Fix for getting task's execution time
In current code, task's execute time is got by reading
'/proc/<pid>/sched' file, it's wrong if the task is created
by pthread_create(), because every thread task has same pid.
This way also has two demerits:
1: 'perf sched replay' can't work if the kernel is not
compiled with the 'CONFIG_SCHED_DEBUG' option
2: perf tool should depend on proc file system
So, this patch uses PERF_COUNT_SW_TASK_CLOCK to get task's
execution time instead of reading /proc file.
Changelog v2 -> v3:
use PERF_COUNT_SW_TASK_CLOCK instead of rusage() as Ingo's
suggestion
tracing/kprobes: Fix field creation's bad error handling
When we define the common event fields in kprobe, we invert the error
handling and return immediately in case of success. Then we omit
to define specific kprobes fields (ip and nargs), and specific
kretprobes fields (func, ret_ip, nargs). And we only define them
when we fail to create common fields.
The most visible consequence is that we can't create filter for
k(ret)probes specific fields.
This patch re-invert the success/error handling to fix it.
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1260263815-5167-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Xiao Guangrong [Wed, 9 Dec 2009 03:29:44 +0000 (11:29 +0800)]
perf_event: Allocate children's perf_event_ctxp at the right time
In current code, children task will allocate memory for
'child->perf_event_ctxp' if the parent is counted, we can
do it only if the parent allowed children inherit it.
hw-breakpoints: Modify breakpoints without unregistering them
Currently, when ptrace needs to modify a breakpoint, like disabling
it, changing its address, type or len, it calls
modify_user_hw_breakpoint(). This latter will perform the heavy and
racy task of unregistering the old breakpoint and registering a new
one.
This is racy as someone else might steal the reserved breakpoint
slot under us, which is undesired as the breakpoint is only
supposed to be modified, sometimes in the middle of a debugging
workflow. We don't want our slot to be stolen in the middle.
So instead of unregistering/registering the breakpoint, just
disable it while we modify its breakpoint fields and re-enable it
after if necessary.
Support perf probe --del <event> option. Currently,
perf probe can have only one event for each --del option.
If you'd like to delete several probe events, you need
to specify --del for each events.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220323.10142.62079.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove event suffix number _0 if it is the first.
The first event has no suffix, and from the second,
each event has suffix number counted from _1. This
reduces typing cost :-).
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220301.10142.50031.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf probe: Fix add-probe command syntax without --add option
Fix add-probe command syntax without --add option.
perf-probe supports add-probe command without --add
option. But it treats each argument as an event definition.
e.g.
perf probe func arg1 arg2
is interpreted as
perf probe --add func --add arg1 --add arg2
But it may be useless in many cases.
This patch fixes this syntax to fold those arguments into
one event definition if there is no --add option. With this
change, above command is interpreted as below;
perf probe --add "func arg1 arg2"
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220254.10142.73767.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change event list format for user readability. perf probe --list
shows event list in "[GROUP:EVENT] EVENT-DEFINITION" format, but
this format is different from the output of perf-list, and
EVENT-DEFINITION is a bit blunt. This patch changes the format to
more user friendly one.
Before:
[probe:schedule_0] schedule+10 prev cpu
After:
probe:schedule_0 (on schedule+10 with prev cpu)
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220240.10142.42916.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf probe: Fix event namelist to duplicate string
Fix event namelist to duplicate string. Without duplicating, adding
multiple probes causes stack overwrite bug, because it reuses a
buffer on stack while the buffer is already added in the namelist.
String duplication solves this bug because only contents of the
buffer is copied to the namelist.
Uses of strcat are almost always signs that someone is too lazy
to think about the code a bit more carefully. One always has to
know about the lengths of the strings involved to avoid buffer
overflows.
This is one case where the size of the object code for me is
reduced by 38 bytes. The code should also be faster, especially
if flags is non-NULL.
Whatever the context nature of a breakpoint, we always perform the
following constraint checks before allocating it a slot:
- Check the number of pinned breakpoint bound the concerned cpus
- Check the max number of task-bound breakpoints that are belonging
to a task.
- Add both and see if we have a reamining slot for the new breakpoint
This is the right thing to do when we are about to register a cpu-only
bound breakpoint. But not if we are dealing with a task bound
breakpoint. What we want in this case is:
- Check the number of pinned breakpoint bound the concerned cpus
- Check the number of breakpoints that already belong to the task
in which the breakpoint to register is bound to.
- Add both
This fixes a regression that makes the "firefox -g" command fail to
register breakpoints once we deal with a secondary thread.
Reported-by: Walt <w41ter@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Prasad <prasad@linux.vnet.ibm.com>
hw-breakpoints: Zeroe the breakpoint attrs on initialization
The perf attrs used to set up breakpoint parameters are often allocated
in the stack and not zeroed out before calling hw_breakpoint_init().
Handle it from this helper to avoid random attributes set by the stack.
OGAWA Hirofumi [Sun, 6 Dec 2009 11:08:24 +0000 (20:08 +0900)]
perf: Make common SAMPLE_EVENT parser
Currently, sample event data is parsed for each commands, and it
is assuming that the data is not including other data. (E.g.
timechart, trace, etc. can't parse the event if it has
PERF_SAMPLE_CALLCHAIN)
So, even if we record the superset data for multiple commands at
a time, commands can't parse. etc.
To fix it, this makes common sample event parser, and use it to
parse sample event correctly. (PERF_SAMPLE_READ is unsupported
for now though, it seems to be not using.)
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <87hbs48imv.fsf@devron.myhome.or.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
OGAWA Hirofumi [Sun, 6 Dec 2009 11:07:29 +0000 (20:07 +0900)]
perf timechart: Fix header handling
Update "struct trace_entry" to match with current one. And
remove "size" field from it.
If it has "size", it become cause of alignment mismatch of
structure with kernel.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Acked-by: Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <87ljhg8ioe.fsf@devron.myhome.or.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we enter in irq, two things can happen to preserve the link
to the previous frame pointer:
- If we were in an irq already, we don't switch to the irq stack
as we are inside. We just need to save the previous frame
pointer and to link the new one to the previous.
- Otherwise we need another level of indirection. We enter the irq with
the previous stack. We save the previous bp inside and make bp
pointing to its saved address. Then we switch to the irq stack and
push bp another time but to the new stack. This makes two levels to
dereference instead of one.
In the second case, the current stacktrace code omits the second level
and loses the frame pointer accuracy. The stack that follows will then
be considered as unreliable.
Handling that makes the perf callchain happier.
Before:
x86: Fixup wrong debug exception frame link in stacktraces
While dumping a stacktrace, the end of the exception stack won't link
the frame pointer to the previous stack.
The interrupted stack will then be considered as unreliable and ignored
by perf, as the frame pointer is unreliable itself.
This happens because we overwrite the frame pointer that links to the
interrupted frame with the address of the exception stack. This is
done in order to reserve space inside.
But rbp has been chosen here only because it is not a scratch register,
so that the address of the exception stack remains in rbp after calling
do_debug(), we can then release the exception stack space without the
need to retrieve its address again.
But we can pick another non-scratch register to do that, so that we
preserve the link to the interrupted stack frame in the stacktraces.
Just randomly choose r12. Every registers are saved just before and
restored just after calling do_debug(). And r12 is not used in the
middle, which makes it a perfect candidate.
Example: perf record -g -a -c 1 -f -e mem:$(tasklist_lock_addr):rw
We are infected with all the debug stack. Like the nmi stack, the debug
stack is undesired as it is part of the profiling path, not helpful for
the user.
Ignore it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
hw-breakpoints: Use overflow handler instead of the event callback
struct perf_event::event callback was called when a breakpoint
triggers. But this is a rather opaque callback, pretty
tied-only to the breakpoint API and not really integrated into perf
as it triggers even when we don't overflow.
We prefer to use overflow_handler() as it fits into the perf events
rules, being called only when we overflow.
Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
hw-breakpoints: Drop callback and task parameters from modify helper
Drop the callback and task parameters from modify_user_hw_breakpoint().
For now we have no user that need to modify a breakpoint to the point
of changing its handler or its task context.
Jason Baron [Tue, 1 Dec 2009 17:18:49 +0000 (12:18 -0500)]
tracing: Add DEFINE_EVENT(), DEFINE_SINGLE_EVENT() support to docbook
The introduction of the new 'DECLARE_EVENT_CLASS()' obviates the
need for the 'TRACE_EVENT()' macro in some cases. Thus, docbook
style comments that used to live with 'TRACE_EVENT()' are now
moved to 'DEFINE_EVENT()'. Thus, we need to make the docbook
system understand the new 'DEFINE_EVENT()' macro. In addition
I've tried to futureproof the patch, by also adding support for
'DEFINE_SINGLE_EVENT()', since there has been discussion about
renaming: TRACE_EVENT() -> DEFINE_SINGLE_EVENT().
Without this patch the tracepoint docbook fails to build.
I've verified that this patch correctly builds the tracepoint
docbook which currently covers signals, and irqs.
Changes in v2:
- properly indent perl 'if' statements
Signed-off-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: William Cohen <wcohen@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <200912011718.nB1HIn7t011371@int-mx04.intmail.prod.int.phx2.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf: Don't free perf_mmap_data until work has been done
In the CONFIG_PERF_USE_VMALLOC case, perf_mmap_data_free() only
schedules the cleanup of the perf_mmap_data struct. In that
case we have to wait until the work has been done before we free
data.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Cc: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org>
LKML-Reference: <1259697901-1747-1-git-send-email-krh@bitplanet.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Simplify event naming as <symbol>_<seqnum>. Each event name is
globally unique (group name is not checked). So, if there is
schedule_0, next probe event on schedule() will be schedule_1.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201002024.10235.2353.stgit@harusame> Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf probe: Change a debugging message from pr_info to pr_debug
Change annoying debug-info using notice from pr_info() to
pr_debug(), since the message always printed when user adds a
probe point which requires debug-info.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201001927.10235.63645.stgit@harusame> Signed-off-by: Ingo Molnar <mingo@elte.hu>
projects / kernel.git / log