Miaohe Lin [Thu, 19 May 2022 12:50:29 +0000 (20:50 +0800)]
mm/shmem: fix infinite loop when swap in shmem error at swapoff time
When swap in shmem error at swapoff time, there would be a infinite loop
in the while loop in shmem_unuse_inode(). It's because swapin error is
deliberately ignored now and thus info->swapped will never reach 0. So we
can't escape the loop in shmem_unuse().
In order to fix the issue, swapin_error entry is stored in the mapping
when swapin error occurs. So the swapcache page can be freed and the user
won't end up with a permanently mounted swap because a sector is bad. If
the page is accessed later, the user process will be killed so that
corrupted data is never consumed. On the other hand, if the page is never
accessed, the user won't even notice it.
Link: https://lkml.kernel.org/r/20220519125030.21486-5-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reported-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: NeilBrown <neilb@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 19 May 2022 12:50:28 +0000 (20:50 +0800)]
mm/madvise: free hwpoison and swapin error entry in madvise_free_pte_range
Once the MADV_FREE operation has succeeded, callers can expect they might
get zero-fill pages if accessing the memory again. Therefore it should be
safe to delete the hwpoison entry and swapin error entry. There is no
reason to kill the process if it has called MADV_FREE on the range.
Link: https://lkml.kernel.org/r/20220519125030.21486-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: NeilBrown <neilb@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 19 May 2022 12:50:27 +0000 (20:50 +0800)]
mm/swapfile: fix lost swap bits in unuse_pte()
This is observed by code review only but not any real report.
When we turn off swapping we could have lost the bits stored in the swap
ptes. The new rmap-exclusive bit is fine since that turned into a page
flag, but not for soft-dirty and uffd-wp. Add them.
Link: https://lkml.kernel.org/r/20220519125030.21486-3-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: NeilBrown <neilb@suse.de> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 19 May 2022 12:50:26 +0000 (20:50 +0800)]
mm/swapfile: unuse_pte can map random data if swap read fails
Patch series "A few fixup patches for mm", v4.
This series contains a few patches to avoid mapping random data if swap
read fails and fix lost swap bits in unuse_pte. Also we free hwpoison and
swapin error entry in madvise_free_pte_range and so on. More details can
be found in the respective changelogs.
This patch (of 5):
There is a bug in unuse_pte(): when swap page happens to be unreadable,
page filled with random data is mapped into user address space. In case
of error, a special swap entry indicating swap read fails is set to the
page table. So the swapcache page can be freed and the user won't end up
with a permanently mounted swap because a sector is bad. And if the page
is accessed later, the user process will be killed so that corrupted data
is never consumed. On the other hand, if the page is never accessed, the
user won't even notice it.
Link: https://lkml.kernel.org/r/20220519125030.21486-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220519125030.21486-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Howells <dhowells@redhat.com> Cc: NeilBrown <neilb@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Koutný [Wed, 18 May 2022 16:18:59 +0000 (18:18 +0200)]
selftests: memcg: factor out common parts of memory.{low,min} tests
The memory protection test setup and runtime is almost equal for
memory.low and memory.min cases.
It makes modification of the common parts prone to mistakes, since the
protections are similar not only in setup but also in principle, factor
the common part out.
Past exceptions between the tests:
- missing memory.min is fine (kept),
- test_memcg_low protected orphaned pagecache (adapted like
test_memcg_min and we keep the processes of protected memory running).
The evaluation in two tests is different (OOM of allocator vs low events
of protégés), this is kept different.
Link: https://lkml.kernel.org/r/20220518161859.21565-6-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> CC: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: David Vernet <void@manifault.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Koutný [Wed, 18 May 2022 16:18:58 +0000 (18:18 +0200)]
selftests: memcg: remove protection from top level memcg
The reclaim is triggered by memory limit in a subtree, therefore the
testcase does not need configured protection against external reclaim.
Also, correct respective comments.
Link: https://lkml.kernel.org/r/20220518161859.21565-5-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: David Vernet <void@manifault.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Koutný [Wed, 18 May 2022 16:18:57 +0000 (18:18 +0200)]
selftests: memcg: adjust expected reclaim values of protected cgroups
The numbers are not easy to derive in a closed form (certainly mere
protections ratios do not apply), therefore use a simulation to obtain
expected numbers.
Link: https://lkml.kernel.org/r/20220518161859.21565-4-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: David Vernet <void@manifault.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Koutný [Wed, 18 May 2022 16:18:56 +0000 (18:18 +0200)]
selftests: memcg: expect no low events in unprotected sibling
This is effectively a revert of commit da2fde982a9f ("cgroup: account for
memory_recursiveprot in test_memcg_low()"). The case test_memcg_low will
fail with memory_recursiveprot until resolved in reclaim code.
However, this patch preserves the existing helpers and variables for later
uses.
Link: https://lkml.kernel.org/r/20220518161859.21565-3-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Reviewed-by: David Vernet <void@manifault.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Koutný [Wed, 18 May 2022 16:18:55 +0000 (18:18 +0200)]
selftests: memcg: fix compilation
Patch series "memcontrol selftests fixups", v2.
Flushing the patches to make memcontrol selftests check the events
behavior we had consensus about (test_memcg_low fails).
(test_memcg_reclaim, test_memcg_swap_max fail for me now but it's present
even before the refactoring.)
The two bigger changes are:
- adjustment of the protected values to make tests succeed with the given
tolerance,
- both test_memcg_low and test_memcg_min check protection of memory in
populated cgroups (actually as per Documentation/admin-guide/cgroup-v2.rst
memory.min should not apply to empty cgroups, which is not the case
currently. Therefore I unified tests with the populated case in order to to
bring more broken tests).
This patch (of 5):
This fixes mis-applied changes from commit 090faf0c743d ("cgroup: account
for memory_localevents in test_memcg_oom_group_leaf_events()").
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: fix z3fold_page_migrate races with z3fold_map
Think about the below scenario:
CPU1 CPU2
z3fold_page_migrate z3fold_map
z3fold_page_trylock
...
z3fold_page_unlock
/* slots still points to old zhdr*/
get_z3fold_header
get slots from handle
get old zhdr from slots
z3fold_page_trylock
return *old* zhdr
encode_handle(new_zhdr, FIRST|LAST|MIDDLE)
put_page(page) /* zhdr is freed! */
but zhdr is still used by caller!
z3fold_map can map freed z3fold page and lead to use-after-free bug. To
fix it, we add PAGE_MIGRATED to indicate z3fold page is migrated and soon
to be released. So get_z3fold_header won't return such page.
Link: https://lkml.kernel.org/r/20220429064051.61552-10-linmiaohe@huawei.com Fixes: c3da3aab5e27 ("mm/z3fold.c: support page migration") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: fix z3fold_reclaim_page races with z3fold_free
Think about the below scenario:
CPU1 CPU2
z3fold_reclaim_page z3fold_free
spin_lock(&pool->lock) get_z3fold_header -- hold page_lock
kref_get_unless_zero
kref_put--zhdr->refcount can be 1 now
!z3fold_page_trylock
kref_put -- zhdr->refcount is 0 now
release_z3fold_page
WARN_ON(!list_empty(&zhdr->buddy)); -- we're on buddy now!
spin_lock(&pool->lock); -- deadlock here!
z3fold_reclaim_page might race with z3fold_free and will lead to pool lock
deadlock and zhdr buddy non-empty warning. To fix this, defer getting the
refcount until page_lock is held just like what __z3fold_alloc does. Note
this has the side effect that we won't break the reclaim if we meet a soon
to be released z3fold page now.
Link: https://lkml.kernel.org/r/20220429064051.61552-9-linmiaohe@huawei.com Fixes: 594060dd2247 ("z3fold: stricter locking and more careful reclaim") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: put z3fold page back into unbuddied list when reclaim or migration fails
When doing z3fold page reclaim or migration, the page is removed from
unbuddied list. If reclaim or migration succeeds, it's fine as page is
released. But in case it fails, the page is not put back into unbuddied
list now. The page will be leaked until next compaction work, reclaim or
migration is done.
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"
Revert commit b37d09c0e51a ("mm/z3fold.c: allow __GFP_HIGHMEM in
z3fold_alloc").
z3fold can't support GFP_HIGHMEM page now. page_address is used directly
at all places. Moreover, z3fold_header is on per cpu unbuddied list which
could be accessed anytime. So we should remove the support of GFP_HIGHMEM
allocation for z3fold.
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: throw warning on failure of trylock_page in z3fold_alloc
If trylock_page fails, the page won't be non-lru movable page. When this
page is freed via free_z3fold_page, it will trigger bug on PageMovable
check in __ClearPageMovable. Throw warning on failure of trylock_page to
guard against such rare case just as what zsmalloc does.
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: remove buggy use of stale list for allocation
Currently if z3fold couldn't find an unbuddied page it would first try to
pull a page off the stale list. But this approach is problematic. If
init z3fold page fails later, the page should be freed via
free_z3fold_page to clean up the relevant resource instead of using
__free_page directly. And if page is successfully reused, it will BUG_ON
later in __SetPageMovable because it's already non-lru movable page, i.e.
PAGE_MAPPING_MOVABLE is already set in page->mapping. In order to fix all
of these issues, we can simply remove the buggy use of stale list for
allocation because can_sleep should always be false and we never really
hit the reusing code path now.
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: fix possible null pointer dereferencing
alloc_slots could fail to allocate memory under heavy memory pressure. So
we should check zhdr->slots against NULL to avoid future null pointer
dereferencing.
Link: https://lkml.kernel.org/r/20220429064051.61552-3-linmiaohe@huawei.com Fixes: 6faa741f667a ("z3fold: simplify freeing slots") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: fix sheduling while atomic
Patch series "A few fixup patches for z3fold".
This series contains a few fixup patches to fix sheduling while atomic,
fix possible null pointer dereferencing, fix various race conditions and
so on. More details can be found in the respective changelogs.
This patch (of 9):
z3fold's page_lock is always held when calling alloc_slots. So gfp should
be GFP_ATOMIC to avoid "scheduling while atomic" bug.
Zi Yan [Thu, 26 May 2022 23:15:31 +0000 (19:15 -0400)]
mm: split free page with properly free memory accounting and without race
In isolate_single_pageblock(), free pages are checked without holding zone
lock, but they can go away in split_free_page() when zone lock is held.
Check the free page and its order again in split_free_page() when zone lock
is held. Recheck the page if the free page is gone under zone lock.
In addition, in split_free_page(), the free page was deleted from the page
list without changing free page accounting. Add the missing free page
accounting code.
Fix the type of order parameter in split_free_page().
Zi Yan [Thu, 26 May 2022 23:15:30 +0000 (19:15 -0400)]
mm: page-isolation: skip isolated pageblock in start_isolate_page_range()
start_isolate_page_range() first isolates the first and the last
pageblocks in the range and ensure pages across range boundaries are split
during isolation. But it missed the case when the range is <= a pageblock
and the first and the last pageblocks are the same one, so the second
isolate_single_pageblock() will always fail. To fix it, skip the
pageblock isolation in second isolate_single_pageblock().
Link: https://lkml.kernel.org/r/20220526231531.2404977-1-zi.yan@sent.com Fixes: 9e28cd2b0dee ("mm: fix a potential infinite loop in start_isolate_page_range()") Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/linux-mm/ac65adc0-a7e4-cdfe-a0d8-757195b86293@samsung.com/ Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/linux-mm/8ca048ca8b547e0dd1c95387ee05c23d@walle.cc/ Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Eric Ren <renzhengeek@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qian Cai <quic_qiancai@quicinc.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patrick Wang [Sat, 21 May 2022 08:38:24 +0000 (16:38 +0800)]
selftests: vm: add "test_hmm.sh" to TEST_FILES
The "test_hmm.sh" file used by run_vmtests.sh dose not be installed into
INSTALL_PATH. Thus run_vmtests.sh can not call it in INSTALL_PATH:
---------------------------
running ./test_hmm.sh smoke
---------------------------
./run_vmtests.sh: line 74: ./test_hmm.sh: No such file or directory
[FAIL]
-----------------------
Add "test_hmm.sh" to TEST_FILES so that it will be installed.
Patrick Wang [Sat, 21 May 2022 08:38:23 +0000 (16:38 +0800)]
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
Patch series "selftests: vm: a few fixup patches".
This series contains three fixup patches for vm selftests. They are
independent. Please see the patches.
This patch (of 3):
Currently, ksm_tests operates "merge_across_nodes" with NUMA either
enabled or disabled. In a system with NUMA disabled, these operations
will fail and output a misleading report given "merge_across_nodes" does
not exist in sysfs:
----------------------------
running ./ksm_tests -M -p 10
----------------------------
f /sys/kernel/mm/ksm/merge_across_nodes
fopen: No such file or directory
Cannot save default tunables
[FAIL]
----------------------
So check numa_available() before those operations to skip them if NUMA is
disabled.
Introduce process_mrelease syscall sanity tests which include tests
which expect to fail:
- process_mrelease with invalid pidfd and flags inputs
- process_mrelease on a live process with no pending signals
and valid process_mrelease usage which is expected to succeed. Because
process_mrelease has to be used against a process with a pending SIGKILL,
it's possible that the process exits before process_mrelease gets called.
In such cases we retry the test with a victim that allocates twice more
memory up to 1GB. This would require the victim process to spend more
time during exit and process_mrelease has a better chance of catching the
process before it exits and succeeding.
On success the test reports the amount of memory the child had to allocate
for reaping to succeed. Sample output:
$ mrelease_test
Success reaping a child with 1MB of memory allocations
On failure the test reports the failure. Sample outputs:
$ mrelease_test
All process_mrelease attempts failed!
Its premise was that cgroup reclaim cares about freeing memory inside the
cgroup, and demotion just moves them around within the cgroup limit.
Hence, pages from toptier nodes should be reclaimed directly.
However, with NUMA balancing now doing tier promotions, demotion is part
of the page aging process. Global reclaim demotes the coldest toptier
pages to secondary memory, where their life continues and from which they
have a chance to get promoted back. Essentially, tiered memory systems
have an LRU order that spans multiple nodes.
When cgroup reclaims pages coming off the toptier directly, there can be
colder pages on lower tier nodes that were demoted by global reclaim.
This is an aging inversion, not unlike if cgroups were to reclaim directly
from the active lists while there are inactive pages.
Proactive reclaim is another factor. The goal of that it is to offload
colder pages from expensive RAM to cheaper storage. When lower tier
memory is available as an intermediate layer, we want offloading to take
advantage of it instead of bypassing to storage.
Revert the patch so that cgroups respect the LRU order spanning the memory
hierarchy.
Of note is a specific undercommit scenario, where all cgroup limits in the
system add up to <= available toptier memory. In that case, shuffling
pages out to lower tiers first to reclaim them from there is inefficient.
This is something could be optimized/short-circuited later on (although
care must be taken not to accidentally recreate the aging inversion).
Let's ensure correctness first.
Link: https://lkml.kernel.org/r/20220518190911.82400-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jackie Liu [Wed, 18 May 2022 07:31:05 +0000 (15:31 +0800)]
mm/kfence: print disabling or re-enabling message
By printing information, we can friendly prompt the status change
information of kfence by dmesg and record by syslog.
Also, set kfence_enabled to false only when needed.
Link: https://lkml.kernel.org/r/20220518073105.3160335-1-liu.yun@linux.dev Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Co-developed-by: Marco Elver <elver@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zi Yan [Tue, 24 May 2022 19:47:56 +0000 (15:47 -0400)]
mm: fix a potential infinite loop in start_isolate_page_range()
In isolate_single_pageblock() called by start_isolate_page_range(), there
are some pageblock isolation issues causing a potential infinite loop when
isolating a page range. This is reported by Qian Cai.
1. the pageblock was isolated by just changing pageblock migratetype
without checking unmovable pages. Calling set_migratetype_isolate() to
isolate pageblock properly.
2. an off-by-one error caused migrating pages unnecessarily, since the page
is not crossing pageblock boundary.
3. migrating a compound page across pageblock boundary then splitting the
free page later has a small race window that the free page might be
allocated again, so that the code will try again, causing an potential
infinite loop. Temporarily set the to-be-migrated page's pageblock to
MIGRATE_ISOLATE to prevent that and bail out early if no free page is
found after page migration.
An additional fix to split_free_page() aims to avoid crashing in
__free_one_page(). When the free page is split at the specified
split_pfn_offset, free_page_order should check both the first bit of
free_page_pfn and the last bit of split_pfn_offset and use the smaller
one. For example, if free_page_pfn=0x10000, split_pfn_offset=0xc000,
free_page_order should first be 0x8000 then 0x4000, instead of 0x4000 then
0x8000, which the original algorithm did.
[akpm@linux-foundation.org: suppress min() warning] Link: https://lkml.kernel.org/r/20220524194756.1698351-1-zi.yan@sent.com Fixes: 468e1bce1df606 ("mm: make alloc_contig_range work at pageblock granularity") Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: Qian Cai <quic_qiancai@quicinc.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Eric Ren <renzhengeek@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muchun Song [Sat, 21 May 2022 07:41:03 +0000 (15:41 +0800)]
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
I have been focusing on mm for the past two years. e.g. developing,
fixing bugs, reviewing related to HugeTLB system. I would like to help
Mike and other people working on HugeTLB by reviewing their work.
When I first introduced the vmemmmap reduction, I forgot to update
MAINTAINERS file. Let's update it as well. And rename "HUGETLB
FILESYSTEM" to "HUGETLB SUBSYSTEM" since some files are not only related
to filesystem but also memory management (the name of FILESYSTEM cannot
cover this area).
With gcc version 12.0.1 20220401 (Red Hat 12.0.1-0), building with
defconfig results in the following compilation error:
| CC mm/swapfile.o
| mm/swapfile.c: In function `setup_swap_info':
| mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds
| of `struct plist_node[]' [-Werror=array-bounds]
| 2291 | p->avail_lists[i].prio = 1;
| | ~~~~~~~~~~~~~~^~~
| In file included from mm/swapfile.c:16:
| ./include/linux/swap.h:292:27: note: while referencing `avail_lists'
| 292 | struct plist_node avail_lists[]; /*
| | ^~~~~~~~~~~
This is due to the compiler detecting that the mask in
node_states[__state] could theoretically be zero, which would lead to
first_node() returning -1 through find_first_bit.
I believe that the warning/error is legitimate. I first tried adding a
test to check that the node mask is not emtpy, since a similar test exists
in the case where MAX_NUMNODES == 1.
However, adding the if statement causes other warnings to appear in
for_each_cpu_node_but, because it introduces a dangling else ambiguity.
And unfortunately, GCC is not smart enough to detect that the added test
makes the case where (node) == -1 impossible, so it still complains with
the same message.
This is why I settled on replacing that with a harmless, but relatively
useless (node) >= 0 test. Based on the warning for the dangling else, I
also decided to fix the case where MAX_NUMNODES == 1 by moving the
condition inside the for loop. It will still only be tested once. This
ensures that the meaning of an else following for_each_node_mask or
derivatives would not silently have a different meaning depending on the
configuration.
Link: https://lkml.kernel.org/r/20220414150855.2407137-3-dinechin@redhat.com Signed-off-by: Christophe de Dinechin <christophe@dinechin.org> Signed-off-by: Christophe de Dinechin <dinechin@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Segall <bsegall@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Qi Zheng [Thu, 19 May 2022 21:08:55 +0000 (14:08 -0700)]
mm: fix missing handler for __GFP_NOWARN
We expect no warnings to be issued when we specify __GFP_NOWARN, but
currently in paths like alloc_pages() and kmalloc(), there are still some
warnings printed, fix it.
But for some warnings that report usage problems, we don't deal with them.
If such warnings are printed, then we should fix the usage problems.
Such as the following case:
Currently, trace point mm_page_alloc_zone_locked() doesn't show correct
information.
First, when alloc_flag has ALLOC_HARDER/ALLOC_CMA, page can be allocated
from MIGRATE_HIGHATOMIC/MIGRATE_CMA. Nevertheless, tracepoint use
requested migration type not MIGRATE_HIGHATOMIC and MIGRATE_CMA.
Second, after commit f769c269399eb ("mm/page_alloc: allow high-order pages
to be stored on the per-cpu lists") percpu-list can store high order
pages. But trace point determine whether it is a refiil of percpu-list by
comparing requested order and 0.
To handle these problems, make mm_page_alloc_zone_locked() only be called
by __rmqueue_smallest with correct migration type. With a new argument
called percpu_refill, it can show roughly whether it is a refill of
percpu-list.
Link: https://lkml.kernel.org/r/20220512025307.57924-1-vvghjk1234@gmail.com Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Baik Song An <bsahn@etri.re.kr> Cc: Hong Yeon Kim <kimhy@etri.re.kr> Cc: Taeung Song <taeung@reallinux.co.kr> Cc: <linuxgeek@linuxgeek.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fanjun Kong [Mon, 16 May 2022 03:00:42 +0000 (11:00 +0800)]
mm/page_owner.c: add missing __initdata attribute
This patch fixes two issues:
1. Add __initdata attribute according to include/linux/init.h:
For initialized data:
You should insert __initdata between the variable name and equal
sign followed by value
2. Fix below error reported by checkpatch.pl:
ERROR: do not initialise statics to false
Special thanks to Muchun Song :)
Link: https://lkml.kernel.org/r/20220516030039.1487005-1-bh1scw@gmail.com Signed-off-by: Fanjun Kong <bh1scw@gmail.com> Suggested-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Luo Meng [Fri, 13 May 2022 02:52:25 +0000 (10:52 +0800)]
tmpfs: fix undefined-behaviour in shmem_reconfigure()
When shmem_reconfigure() calls __percpu_counter_compare(), the second
parameter is unsigned long long. But in the definition of
__percpu_counter_compare(), the second parameter is s64. So when
__percpu_counter_compare() executes abs(count - rhs), UBSAN shows the
following warning:
Wang Cheng [Thu, 19 May 2022 21:08:54 +0000 (14:08 -0700)]
mm/mempolicy: fix uninit-value in mpol_rebind_policy()
mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when
pol->mode is MPOL_LOCAL. Check pol->mode before access
pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c).
Minchan Kim [Thu, 19 May 2022 21:08:54 +0000 (14:08 -0700)]
mm: don't be stuck to rmap lock on reclaim path
The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended
under memory pressure if processes keep working on their vmas(e.g., fork,
mmap, munmap). It makes reclaim path stuck. In our real workload traces,
we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it
makes other processes entering direct reclaim, which were also stuck on
the lock.
This patch makes lru aging path try_lock mode like shink_page_list so the
reclaim context will keep working with next lru pages without being stuck.
if it found the rmap lock contended, it rotates the page back to head of
lru in both active/inactive lrus to make them consistent behavior, which
is basic starting point rather than adding more heristic.
Since this patch introduces a new "contended" field as out-param along
with try_lock in-param in rmap_walk_control, it's not immutable any longer
if the try_lock is set so remove const keywords on rmap related functions.
Since rmap walking is already expensive operation, I doubt the const
would help sizable benefit( And we didn't have it until 5.17).
In a heavy app workload in Android, trace shows following statistics. It
almost removes rmap lock contention from reclaim path.
max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function
NaN NaN NaN NaN NaN 0.0 NaN
0 0 0 0.127645 1 12 rmap_walk_file
[minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Johannes Weiner [Thu, 19 May 2022 21:08:53 +0000 (14:08 -0700)]
zswap: memcg accounting
Applications can currently escape their cgroup memory containment when
zswap is enabled. This patch adds per-cgroup tracking and limiting of
zswap backend memory to rectify this.
The existing cgroup2 memory.stat file is extended to show zswap statistics
analogous to what's in meminfo and vmstat. Furthermore, two new control
files, memory.zswap.current and memory.zswap.max, are added to allow
tuning zswap usage on a per-workload basis. This is important since not
all workloads benefit from zswap equally; some even suffer compared to
disk swap when memory contents don't compress well. The optimal size of
the zswap pool, and the threshold for writeback, also depends on the size
of the workload's warm set.
The implementation doesn't use a traditional page_counter transaction.
zswap is unconventional as a memory consumer in that we only know the
amount of memory to charge once expensive compression has occurred. If
zwap is disabled or the limit is already exceeded we obviously don't want
to compress page upon page only to reject them all. Instead, the limit is
checked against current usage, then we compress and charge. This allows
some limit overrun, but not enough to matter in practice.
Johannes Weiner [Thu, 19 May 2022 21:08:53 +0000 (14:08 -0700)]
mm: zswap: add basic meminfo and vmstat coverage
Currently it requires poking at debugfs to figure out the size and
population of the zswap cache on a host. There are no counters for reads
and writes against the cache. As a result, it's difficult to understand
zswap behavior on production systems.
Print zswap memory consumption and how many pages are zswapped out in
/proc/meminfo. Count zswapouts and zswapins in /proc/vmstat.
Link: https://lkml.kernel.org/r/20220510152847.230957-6-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Johannes Weiner [Thu, 19 May 2022 21:08:53 +0000 (14:08 -0700)]
mm: Kconfig: simplify zswap configuration
- CONFIG_ZRAM: Zram is a user-facing feature, whereas zsmalloc is
not. Don't make the user chase down a technical dependency like
that, just select it in automatically when zram is requested. The
CONFIG_CRYPTO dependency is redundant due to more specific deps.
- CONFIG_ZPOOL: This is not a user-facing feature. Hide the symbol and
have it selected in as needed.
- CONFIG_ZSWAP: Select CRYPTO instead of depend. Common pattern.
- Make the ZSWAP suboptions and their descriptions (compression,
allocation backend) a bit more straight-forward for the user.
Link: https://lkml.kernel.org/r/20220510152847.230957-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Johannes Weiner [Thu, 19 May 2022 21:08:53 +0000 (14:08 -0700)]
mm: Kconfig: group swap, slab, hotplug and thp options into submenus
There are several clusters of related config options spread throughout the
mostly flat MM submenu. Group them together and put specialization
options into further subdirectories to make the MM submenu a bit more
organized and easier to navigate.
Patch series "zswap: accounting & cgroup control", v2.
Zswap can consume nearly a quarter of RAM in the default configuration,
yet it's neither listed in /proc/meminfo, nor is it accounted and
manageable on a per-cgroup basis.
This makes reasoning about the memory situation on a host in general
rather difficult. On shared/cgrouped hosts, the consequences are worse.
First, workloads can escape memory containment and cause resource priority
inversions: a lo-pri group can fill the global zswap pool and force a
hi-pri group out to disk. Second, not all workloads benefit from zswap
equally. Some even suffer when memory contents compress poorly, and are
better off going to disk swap directly. On a host with mixed workloads,
it's currently not possible to enable zswap for one workload but not for
the other.
This series implements the missing global accounting as well as cgroup
tracking & control for zswap backing memory:
- Patch 1 refreshes the very out-of-date meminfo documentation in
Documentation/filesystems/proc.rst.
- Patches 2-4 clean up related and adjacent options in Kconfig. Not
actual dependencies, just things I noticed during development.
- Patch 5 adds meminfo and vmstat coverage for zswap consumption and
activity.
- Patch 6 implements per-cgroup tracking & control of zswap memory.
Miaohe Lin [Thu, 19 May 2022 21:08:52 +0000 (14:08 -0700)]
mm/swap: fix comment about swap extent
Since commit 19396f241c5d ("mm, swap: use rbtree for swap_extent"), rbtree
is used for swap extent. Also curr_swap_extent is removed at that time.
Update the corresponding comment.
Link: https://lkml.kernel.org/r/20220509131416.17553-16-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: NeilBrown <neilb@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 19 May 2022 21:08:52 +0000 (14:08 -0700)]
mm/swap: fix the obsolete comment for SWP_TYPE_SHIFT
Since commit 27cc758dc13d ("xarray: Replace exceptional entries"), there
is only one bit of 'type' can be shifted up. Update the corresponding
comment.
Link: https://lkml.kernel.org/r/20220509131416.17553-13-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Howells <dhowells@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: NeilBrown <neilb@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 19 May 2022 21:08:50 +0000 (14:08 -0700)]
mm/swap: use helper is_swap_pte() in swap_vma_readahead
Patch series "A few cleanup patches for swap".
This series contains a few patches to fix the comment, remove unneeded
return value, use some helpers and so on. More details can be found in
the respective changelogs.
This patch (of 14):
Use helper is_swap_pte() to check whether pte is swap entry to make code
more clear. Minor readability improvement.
Link: https://lkml.kernel.org/r/20220509131416.17553-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220509131416.17553-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Howells <dhowells@redhat.com> Cc: NeilBrown <neilb@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Shi [Thu, 19 May 2022 21:08:50 +0000 (14:08 -0700)]
mm: mmap: register suitable readonly file vmas for khugepaged
The readonly FS THP relies on khugepaged to collapse THP for suitable
vmas. But the behavior is inconsistent for "always" mode
(https://lore.kernel.org/linux-mm/00f195d4-d039-3cf2-d3a1-a2c88de397a0@suse.cz/).
The "always" mode means THP allocation should be tried all the time and
khugepaged should try to collapse THP all the time. Of course the
allocation and collapse may fail due to other factors and conditions.
Currently file THP may not be collapsed by khugepaged even though all the
conditions are met. That does break the semantics of "always" mode.
So make sure readonly FS vmas are registered to khugepaged to fix the
break.
Register suitable vmas in common mmap path, that could cover both readonly
FS vmas and shmem vmas, so remove the khugepaged calls in shmem.c.
Still need to keep the khugepaged call in vma_merge() since vma_merge() is
called in a lot of places, for example, madvise, mprotect, etc.
Link: https://lkml.kernel.org/r/20220510203222.24246-9-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastmil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Song Liu <songliubraving@fb.com> Cc: Rik van Riel <riel@surriel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Song Liu <song@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The khugepaged_enter_vma_merge() actually does as the same thing as the
khugepaged_enter() section called by shmem_mmap(), so consolidate them
into one helper and rename it to khugepaged_enter_vma().
Link: https://lkml.kernel.org/r/20220510203222.24246-8-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Vlastmil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Rik van Riel <riel@surriel.com> Cc: Song Liu <song@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Shi [Thu, 19 May 2022 21:08:49 +0000 (14:08 -0700)]
mm: khugepaged: make hugepage_vma_check() non-static
The hugepage_vma_check() could be reused by khugepaged_enter() and
khugepaged_enter_vma_merge(), but it is static in khugepaged.c. Make it
non-static and declare it in khugepaged.h.
Link: https://lkml.kernel.org/r/20220510203222.24246-7-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Rik van Riel <riel@surriel.com> Cc: Song Liu <song@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Shi [Thu, 19 May 2022 21:08:49 +0000 (14:08 -0700)]
mm: khugepaged: make khugepaged_enter() void function
The most callers of khugepaged_enter() don't care about the return value.
Only dup_mmap(), anonymous THP page fault and MADV_HUGEPAGE handle the
error by returning -ENOMEM. Actually it is not harmful for them to ignore
the error case either. It also sounds overkilling to fail fork() and page
fault early due to khugepaged_enter() error, and MADV_HUGEPAGE does set
VM_HUGEPAGE flag regardless of the error.
Link: https://lkml.kernel.org/r/20220510203222.24246-6-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Song Liu <song@kernel.org> Acked-by: Vlastmil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Rik van Riel <riel@surriel.com> Cc: Song Liu <songliubraving@fb.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Shi [Thu, 19 May 2022 21:08:49 +0000 (14:08 -0700)]
mm: thp: only regular file could be THP eligible
Since commit 86cbc5ea8267 ("mm: khugepaged: skip huge page collapse for
special files"), khugepaged just collapses THP for regular file which is
the intended usecase for readonly fs THP. Only show regular file as THP
eligible accordingly.
And make file_thp_enabled() available for khugepaged too in order to
remove duplicate code.
Link: https://lkml.kernel.org/r/20220510203222.24246-5-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Song Liu <song@kernel.org> Acked-by: Vlastmil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Rik van Riel <riel@surriel.com> Cc: Song Liu <songliubraving@fb.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Shi [Thu, 19 May 2022 21:08:49 +0000 (14:08 -0700)]
mm: khugepaged: skip DAX vma
The DAX vma may be seen by khugepaged when the mm has other khugepaged
suitable vmas. So khugepaged may try to collapse THP for DAX vma, but it
will fail due to page sanity check, for example, page is not on LRU.
So it is not harmful, but it is definitely pointless to run khugepaged
against DAX vma, so skip it in early check.
Link: https://lkml.kernel.org/r/20220510203222.24246-4-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Song Liu <song@kernel.org> Acked-by: Vlastmil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Song Liu <songliubraving@fb.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Shi [Thu, 19 May 2022 21:08:49 +0000 (14:08 -0700)]
mm: khugepaged: remove redundant check for VM_NO_KHUGEPAGED
The hugepage_vma_check() called by khugepaged_enter_vma_merge() does check
VM_NO_KHUGEPAGED. Remove the check from caller and move the check in
hugepage_vma_check() up.
More checks may be run for VM_NO_KHUGEPAGED vmas, but MADV_HUGEPAGE is
definitely not a hot path, so cleaner code does outweigh.
Link: https://lkml.kernel.org/r/20220510203222.24246-3-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Song Liu <song@kernel.org> Acked-by: Vlastmil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Song Liu <songliubraving@fb.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Shi [Thu, 19 May 2022 21:08:48 +0000 (14:08 -0700)]
sched: coredump.h: clarify the use of MMF_VM_HUGEPAGE
Patch series "Make khugepaged collapse readonly FS THP more consistent", v4.
The readonly FS THP relies on khugepaged to collapse THP for suitable
vmas. But the behavior is inconsistent for "always" mode
(https://lore.kernel.org/linux-mm/00f195d4-d039-3cf2-d3a1-a2c88de397a0@suse.cz/).
The "always" mode means THP allocation should be tried all the time and
khugepaged should try to collapse THP all the time. Of course the
allocation and collapse may fail due to other factors and conditions.
Currently file THP may not be collapsed by khugepaged even though all the
conditions are met. That does break the semantics of "always" mode.
So make sure readonly FS vmas are registered to khugepaged to fix the
break.
Register suitable vmas in common mmap path, that could cover both readonly
FS vmas and shmem vmas, so remove the khugepaged calls in shmem.c.
The patch 1-7 are minor bug fixes, clean up and preparation patches.
Patch 8 is the real meat.
Tested with khugepaged test in selftests and the testcase provided by
Vlastimil Babka in
https://lore.kernel.org/lkml/df3b5d1c-a36b-2c73-3e27-99e74983de3a@suse.cz/
by commenting out MADV_HUGEPAGE call.
This patch (of 8):
MMF_VM_HUGEPAGE is set as long as the mm is available for khugepaged by
khugepaged_enter(), not only when VM_HUGEPAGE is set on vma. Correct the
comment to avoid confusion.
Link: https://lkml.kernel.org/r/20220510203222.24246-1-shy828301@gmail.com Link: https://lkml.kernel.org/r/20220510203222.24246-2-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Song Liu <song@kernel.org> Acked-by: Vlastmil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Song Liu <songliubraving@fb.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rei Yamamoto [Fri, 13 May 2022 23:48:57 +0000 (16:48 -0700)]
mm, compaction: fast_find_migrateblock() should return pfn in the target zone
At present, pages not in the target zone are added to cc->migratepages
list in isolate_migratepages_block(). As a result, pages may migrate
between nodes unintentionally.
This would be a serious problem for older kernels without commit f5342e7522a7b22f ("mm: memcontrol: remove the pgdata parameter of
mem_cgroup_page_lruvec"), because it can corrupt the lru list by
handling pages in list without holding proper lru_lock.
Avoid returning a pfn outside the target zone in the case that it is
not aligned with a pageblock boundary. Otherwise
isolate_migratepages_block() will handle pages not in the target zone.
Link: https://lkml.kernel.org/r/20220511044300.4069-1-yamamoto.rei@jp.fujitsu.com Fixes: 0017a7d5b850 ("mm, compaction: use free lists to quickly locate a migration source") Signed-off-by: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Don Dutile <ddutile@redhat.com> Cc: Wonhyuk Yang <vvghjk1234@gmail.com> Cc: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/memcontrol: export memcg->watermark via sysfs for v2 memcg
We run a lot of automated tests when building our software and run into
OOM scenarios when the tests run unbounded. v1 memcg exports
memcg->watermark as "memory.max_usage_in_bytes" in sysfs. We use this
metric to heuristically limit the number of tests that can run in parallel
based on per test historical data.
This metric is currently not exported for v2 memcg and there is no other
easy way of getting this information. getrusage() syscall returns
"ru_maxrss" which can be used as an approximation but that's the max RSS
of a single child process across all children instead of the aggregated
max for all child processes. The only work around is to periodically poll
"memory.current" but that's not practical for short-lived one-off cgroups.
Hence, expose memcg->watermark as "memory.peak" for v2 memcg.
Link: https://lkml.kernel.org/r/20220507050916.GA13577@us192.sjc.aristanetworks.com Signed-off-by: Ganesan Rajagopal <rganesan@arista.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We must add hugetlb_free_vmemmap=on (or "off") to the boot cmdline and
reboot the server to enable or disable the feature of optimizing vmemmap
pages associated with HugeTLB pages. However, rebooting usually takes a
long time. So add a sysctl to enable or disable the feature at runtime
without rebooting. Why we need this? There are 3 use cases.
1) The feature of minimizing overhead of struct page associated with
each HugeTLB is disabled by default without passing
"hugetlb_free_vmemmap=on" to the boot cmdline. When we (ByteDance)
deliver the servers to the users who want to enable this feature, they
have to configure the grub (change boot cmdline) and reboot the
servers, whereas rebooting usually takes a long time (we have thousands
of servers). It's a very bad experience for the users. So we need a
approach to enable this feature after rebooting. This is a use case in
our practical environment.
2) Some use cases are that HugeTLB pages are allocated 'on the fly'
instead of being pulled from the HugeTLB pool, those workloads would be
affected with this feature enabled. Those workloads could be
identified by the characteristics of they never explicitly allocating
huge pages with 'nr_hugepages' but only set 'nr_overcommit_hugepages'
and then let the pages be allocated from the buddy allocator at fault
time. We can confirm it is a real use case from the commit eafeb8f01f4a. For those workloads, the page fault time could be ~2x
slower than before. We suspect those users want to disable this
feature if the system has enabled this before and they don't think the
memory savings benefit is enough to make up for the performance drop.
3) If the workload which wants vmemmap pages to be optimized and the
workload which wants to set 'nr_overcommit_hugepages' and does not want
the extera overhead at fault time when the overcommitted pages be
allocated from the buddy allocator are deployed in the same server.
The user could enable this feature and set 'nr_hugepages' and
'nr_overcommit_hugepages', then disable the feature. In this case, the
overcommited HugeTLB pages will not encounter the extra overhead at
fault time.
Link: https://lkml.kernel.org/r/20220512041142.39501-5-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muchun Song [Fri, 13 May 2022 23:48:56 +0000 (16:48 -0700)]
mm: hugetlb_vmemmap: use kstrtobool for hugetlb_vmemmap param parsing
Use kstrtobool rather than open coding "on" and "off" parsing in
mm/hugetlb_vmemmap.c, which is more powerful to handle all kinds of
parameters like 'Yy1Nn0' or [oO][NnFf] for "on" and "off".
Link: https://lkml.kernel.org/r/20220512041142.39501-4-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muchun Song [Fri, 13 May 2022 23:48:56 +0000 (16:48 -0700)]
mm: memory_hotplug: override memmap_on_memory when hugetlb_free_vmemmap=on
Optimizing HugeTLB vmemmap pages is not compatible with allocating memmap
on hot added memory. If "hugetlb_free_vmemmap=on" and
memory_hotplug.memmap_on_memory" are both passed on the kernel command
line, optimizing hugetlb pages takes precedence. However, the global
variable memmap_on_memory will still be set to 1, even though we will not
try to allocate memmap on hot added memory.
Also introduce mhp_memmap_on_memory() helper to move the definition of
"memmap_on_memory" to the scope of CONFIG_MHP_MEMMAP_ON_MEMORY. In the
next patch, mhp_memmap_on_memory() will also be exported to be used in
hugetlb_vmemmap.c.
Link: https://lkml.kernel.org/r/20220512041142.39501-3-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muchun Song [Fri, 13 May 2022 23:48:56 +0000 (16:48 -0700)]
mm: hugetlb_vmemmap: disable hugetlb_optimize_vmemmap when struct page crosses page boundaries
Patch series "add hugetlb_optimize_vmemmap sysctl", v11.
This series aims to add hugetlb_optimize_vmemmap sysctl to enable or
disable the feature of optimizing vmemmap pages associated with HugeTLB
pages.
This patch (of 4):
If the size of "struct page" is not the power of two but with the feature
of minimizing overhead of struct page associated with each HugeTLB is
enabled, then the vmemmap pages of HugeTLB will be corrupted after
remapping (panic is about to happen in theory). But this only exists when
!CONFIG_MEMCG && !CONFIG_SLUB on x86_64. However, it is not a
conventional configuration nowadays. So it is not a real word issue, just
the result of a code review.
But we cannot prevent anyone from configuring that combined configure.
This hugetlb_optimize_vmemmap should be disable in this case to fix this
issue.
Link: https://lkml.kernel.org/r/20220512041142.39501-1-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20220512041142.39501-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Fri, 13 May 2022 23:48:56 +0000 (16:48 -0700)]
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when unmapping
On some architectures (like ARM64), it can support CONT-PTE/PMD size
hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and
1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified.
When unmapping a hugetlb page, we will get the relevant page table entry
by huge_pte_offset() only once to nuke it. This is correct for PMD or PUD
size hugetlb, since they always contain only one pmd entry or pud entry in
the page table.
However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since
they can contain several continuous pte or pmd entry with same page table
attributes, so we will nuke only one pte or pmd entry for this
CONT-PTE/PMD size hugetlb page.
And now try_to_unmap() is only passed a hugetlb page in the case where the
hugetlb page is poisoned. Which means now we will unmap only one pte
entry for a CONT-PTE or CONT-PMD size poisoned hugetlb page, and we can
still access other subpages of a CONT-PTE or CONT-PMD size poisoned
hugetlb page, which will cause serious issues possibly.
So we should change to use huge_ptep_clear_flush() to nuke the hugetlb
page table to fix this issue, which already considered CONT-PTE and
CONT-PMD size hugetlb.
We've already used set_huge_swap_pte_at() to set a poisoned swap entry for
a poisoned hugetlb page. Meanwhile adding a VM_BUG_ON() to make sure the
passed hugetlb page is poisoned in try_to_unmap().
Link: https://lkml.kernel.org/r/0a2e547238cad5bc153a85c3e9658cb9d55f9cac.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/730ea4b6d292f32fb10b7a4e87dad49b0eb30474.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Fri, 13 May 2022 23:48:55 +0000 (16:48 -0700)]
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when migration
On some architectures (like ARM64), it can support CONT-PTE/PMD size
hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and
1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified.
When migrating a hugetlb page, we will get the relevant page table entry
by huge_pte_offset() only once to nuke it and remap it with a migration
pte entry. This is correct for PMD or PUD size hugetlb, since they always
contain only one pmd entry or pud entry in the page table.
However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since
they can contain several continuous pte or pmd entry with same page table
attributes. So we will nuke or remap only one pte or pmd entry for this
CONT-PTE/PMD size hugetlb page, which is not expected for hugetlb
migration. The problem is we can still continue to modify the subpages'
data of a hugetlb page during migrating a hugetlb page, which can cause a
serious data consistent issue, since we did not nuke the page table entry
and set a migration pte for the subpages of a hugetlb page.
To fix this issue, we should change to use huge_ptep_clear_flush() to nuke
a hugetlb page table, and remap it with set_huge_pte_at() and
set_huge_swap_pte_at() when migrating a hugetlb page, which already
considered the CONT-PTE or CONT-PMD size hugetlb.
[akpm@linux-foundation.org: fix nommu build]
[baolin.wang@linux.alibaba.com: fix build errors for !CONFIG_MMU] Link: https://lkml.kernel.org/r/a4baca670aca637e7198d9ae4543b8873cb224dc.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/ea5abf529f0997b5430961012bfda6166c1efc8c.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Fri, 13 May 2022 23:48:55 +0000 (16:48 -0700)]
mm: change huge_ptep_clear_flush() to return the original pte
Patch series "Fix CONT-PTE/PMD size hugetlb issue when unmapping or migrating", v4.
presently, migrating a hugetlb page or unmapping a poisoned hugetlb page,
we'll use ptep_clear_flush() and set_pte_at() to nuke the page table entry
and remap it, and this is incorrect for CONT-PTE or CONT-PMD size hugetlb
page, which will cause potential data consistent issue. This patch set
will change to use hugetlb related APIs to fix this issue.
Note: Mike pointed out the huge_ptep_get() will only return the one
specific value, and it would not take into account the dirty or young bits
of CONT-PTE/PMDs like the huge_ptep_get_and_clear() [1]. This
inconsistent issue is not introduced by this patch set, and this issue
will be addressed in another thread [2]. Meanwhile the uffd for hugetlb
case [3] pointed out by Gerald also needs another patch to address.
It is incorrect to use ptep_clear_flush() to nuke a hugetlb page table
when unmapping or migrating a hugetlb page, and will change to use
huge_ptep_clear_flush() instead in the following patches.
So this is a preparation patch, which changes the huge_ptep_clear_flush()
to return the original pte to help to nuke a hugetlb page table.
Extend and rework the "Temporary Virtual Mappings" section of the
highmem.rst documentation.
Despite the local kmaps were introduced by Thomas Gleixner in October
2020, documentation was still missing information about them. These
additions rely largely on Gleixner's patches, Jonathan Corbet's LWN
articles, comments by Ira Weiny and Matthew Wilcox, and in-code comments
from ./include/linux/highmem.h.
1) Add a paragraph to document kmap_local_page().
2) Reorder the list of functions by decreasing order of preference
of use.
3) Rework part of the kmap() entry in list.
Link: https://lkml.kernel.org/r/20220428212455.892-5-fmdefrancesco@gmail.com Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Documentation/vm: move "Using kmap-atomic" to highmem.h
The use of kmap_atomic() is new code is being deprecated in favor of
kmap_local_page(). For this reason the "Using kmap_atomic" section in
highmem.rst is obsolete and unnecessary, but it can still help developers
if it were moved to kdocs in highmem.h.
Therefore, move the relevant parts of this section from highmem.rst and
merge them with the kdocs in highmem.h.
Link: https://lkml.kernel.org/r/20220428212455.892-4-fmdefrancesco@gmail.com Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Documentation/vm: include kdocs from highmem*.h into highmem.rst
kernel-docs that are in include/linux/highmem.h and in
include/linux/highmem-internal.h should be included in highmem.rst.
Use kdocs directives to include the above-mentioned comments into
highmem.rst.
Link: https://lkml.kernel.org/r/20220428212455.892-3-fmdefrancesco@gmail.com Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Extend and reorganize Highmem's documentation", v4.
This series has the purpose to extend and reorganize Highmem's
documentation.
This is a work in progress because some information should still be moved
from highmem.rst to highmem.h and highmem-internal.h. Specifically I'm
talking about moving the "how to" information to the relevant headers, as
it as been suggested by Ira Weiny (Intel).
Also, this is a work in progress because some kdocs in highmem.h and
highmem-internal.h should be improved.
This patch (of 4):
`scripts/kernel-doc -v -none include/linux/highmem*` reports the following
warnings:
include/linux/highmem.h:160: warning: expecting prototype for kunmap_atomic(). Prototype was for nr_free_highpages() instead
include/linux/highmem.h:204: warning: No description found for return value of 'alloc_zeroed_user_highpage_movable'
include/linux/highmem-internal.h:256: warning: Function parameter or member '__addr' not described in 'kunmap_atomic'
include/linux/highmem-internal.h:256: warning: Excess function parameter 'addr' description in 'kunmap_atomic'
Fix these warnings by (1) moving the kernel-doc comments from highmem.h to
highmem-internal.h (which is the file were the kunmap_atomic() macro is
actually defined), (2) extending and merging it with the comment which was
already in highmem-internal.h, and (3) using correct parameter names (4)
correcting a few technical inaccuracies in comments, and (5) adding a
deprecation notice in kunmap_atomic() for consistency with kmap_atomic().
Link: https://lkml.kernel.org/r/20220428212455.892-1-fmdefrancesco@gmail.com Link: https://lkml.kernel.org/r/20220428212455.892-2-fmdefrancesco@gmail.com Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zhenwei pi [Fri, 13 May 2022 03:23:10 +0000 (20:23 -0700)]
mm/hwpoison: disable hwpoison filter during removing
hwpoison filter is enabled by hwpoison-inject module, after removing this
module, hwpoison filter still works. What is worse, user can not find the
debugfs entries to know this.
Disable the hwpoison filter during removing hwpoison-inject module.
zhenwei pi [Fri, 13 May 2022 03:23:10 +0000 (20:23 -0700)]
mm/memory-failure.c: add hwpoison_filter for soft offline
hwpoison_filter is missing in the soft offline path, this leads an issue:
after enabling the corrupt filter, the user process still has a chance to
inject hwpoison fault by madvise(addr, len, MADV_SOFT_OFFLINE) at PFN
which is expected to reject.
Also do a minor change in comment of memory_failure().
zhenwei pi [Fri, 13 May 2022 03:23:09 +0000 (20:23 -0700)]
mm/memory-failure.c: move clear_hwpoisoned_pages
Patch series "memory-failure: fix hwpoison_filter", v2.
As well known, the memory failure mechanism handles memory corrupted
event, and try to send SIGBUS to the user process which uses this
corrupted page.
For the virtualization case, QEMU catches SIGBUS and tries to inject MCE
into the guest, and the guest handles memory failure again. Thus the
guest gets the minimal effect from hardware memory corruption.
The further step I'm working on:
1, try to modify code to decrease poisoned pages in a single place
(mm/memofy-failure.c: simplify num_poisoned_pages_dec in this series).
2, try to use page_handle_poison() to handle SetPageHWPoison() and
num_poisoned_pages_inc() together. It would be best to call
num_poisoned_pages_inc() in a single place too.
3, introduce memory failure notifier list in memory-failure.c: notify
the corrupted PFN to someone who registers this list. If I can
complete [1] and [2] part, [3] will be quite easy(just call notifier
list after increasing poisoned page).
4, introduce memory recover VQ for memory balloon device, and registers
memory failure notifier list. During the guest kernel handles memory
failure, balloon device gets notified by memory failure notifier list,
and tells the host to recover the corrupted PFN(GPA) by the new VQ.
5, host side remaps the corrupted page(HVA), and tells the guest side
to unpoison the PFN(GPA). Then the guest fixes the corrupted page(GPA)
dynamically.
This patch (of 5):
clear_hwpoisoned_pages() clears HWPoison flag and decreases the number of
poisoned pages, this actually works as part of memory failure.
Move this function from sparse.c to memory-failure.c, finally there is no
CONFIG_MEMORY_FAILURE in sparse.c.
Andrey Konovalov [Fri, 13 May 2022 03:23:09 +0000 (20:23 -0700)]
kasan: update documentation
Do assorted clean-ups and improvements to KASAN documentation, including:
- Describe each mode in a dedicated paragraph.
- Split out a Support section that describes in details which compilers,
architectures and memory types each mode requires/supports.
- Capitalize the first letter in the names of each KASAN mode.
projects / kernel.git / log